diff options
| -rw-r--r-- | arch/arm/mach-sa1100/neponset.c | 19 | ||||
| -rw-r--r-- | drivers/pcmcia/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/pcmcia/sa1111_neponset.c | 79 |
3 files changed, 38 insertions, 61 deletions
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index b1823f445358..eb60a71cf125 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -5,6 +5,7 @@ #include <linux/err.h> #include <linux/gpio/driver.h> #include <linux/gpio/gpio-reg.h> +#include <linux/gpio/machine.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/irq.h> @@ -96,6 +97,19 @@ struct neponset_drvdata { struct gpio_chip *gpio[4]; }; +static struct gpiod_lookup_table neponset_pcmcia_table = { + .dev_id = "1800", + .table = { + GPIO_LOOKUP("sa1111", 1, "a0vcc", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 0, "a1vcc", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("neponset-ncr", 5, "a0vpp", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("neponset-ncr", 6, "a1vpp", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 2, "b0vcc", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sa1111", 3, "b1vcc", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct neponset_drvdata *nep; void neponset_ncr_frob(unsigned int mask, unsigned int val) @@ -374,6 +388,8 @@ static int neponset_probe(struct platform_device *dev) d->base + AUD_CTL, AUD_NGPIO, false, neponset_aud_names); + gpiod_add_lookup_table(&neponset_pcmcia_table); + /* * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately * something on the Neponset activates this IRQ on sleep (eth?) @@ -424,6 +440,9 @@ static int neponset_remove(struct platform_device *dev) platform_device_unregister(d->sa1111); if (!IS_ERR(d->smc91x)) platform_device_unregister(d->smc91x); + + gpiod_remove_lookup_table(&neponset_pcmcia_table); + irq_set_chained_handler(irq, NULL); irq_free_descs(d->irq_base, NEP_IRQ_NR); nep = NULL; diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 1a257a323923..8e8db3aa9fce 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -194,6 +194,7 @@ config PCMCIA_SA1111 select PCMCIA_SOC_COMMON select PCMCIA_SA11XX_BASE if ARCH_SA1100 select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111 + select PCMCIA_MAX1600 if ASSABET_NEPONSET help Say Y here to include support for SA1111-based PCMCIA or CF sockets, found on the Jornada 720, Graphicsmaster and other diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c index 0ccf05a28a4b..de0ce13355b4 100644 --- a/drivers/pcmcia/sa1111_neponset.c +++ b/drivers/pcmcia/sa1111_neponset.c @@ -10,12 +10,10 @@ #include <linux/errno.h> #include <linux/init.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include <mach/neponset.h> -#include <asm/hardware/sa1111.h> #include "sa1111_generic.h" +#include "max1600.h" /* * Neponset uses the Maxim MAX1600, with the following connections: @@ -40,70 +38,36 @@ * "Standard Intel code" mode. Refer to the Maxim data sheet for * the corresponding truth table. */ - -static int -neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) +static int neponset_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { - struct sa1111_pcmcia_socket *s = to_skt(skt); - unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set; + struct max1600 *m; int ret; - switch (skt->nr) { - case 0: - pa_dwr_mask = GPIO_A0 | GPIO_A1; - ncr_mask = NCR_A0VPP | NCR_A1VPP; - - if (state->Vpp == 0) - ncr_set = 0; - else if (state->Vpp == 120) - ncr_set = NCR_A1VPP; - else if (state->Vpp == state->Vcc) - ncr_set = NCR_A0VPP; - else { - printk(KERN_ERR "%s(): unrecognized VPP %u\n", - __func__, state->Vpp); - return -1; - } - break; - - case 1: - pa_dwr_mask = GPIO_A2 | GPIO_A3; - ncr_mask = 0; - ncr_set = 0; - - if (state->Vpp != state->Vcc && state->Vpp != 0) { - printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n", - __func__, state->Vpp); - return -1; - } - break; + ret = max1600_init(skt->socket.dev.parent, &m, + skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A, + MAX1600_CODE_LOW); + if (ret == 0) + skt->driver_data = m; - default: - return -1; - } + return ret; +} - /* - * pa_dwr_set is the mask for selecting Vcc on both sockets. - * pa_dwr_mask selects which bits (and therefore socket) we change. - */ - switch (state->Vcc) { - default: - case 0: pa_dwr_set = 0; break; - case 33: pa_dwr_set = GPIO_A1|GPIO_A2; break; - case 50: pa_dwr_set = GPIO_A0|GPIO_A3; break; - } +static int +neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) +{ + struct max1600 *m = skt->driver_data; + int ret; ret = sa1111_pcmcia_configure_socket(skt, state); - if (ret == 0) { - neponset_ncr_frob(ncr_mask, ncr_set); - sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); - } + if (ret == 0) + ret = max1600_configure(m, state->Vcc, state->Vpp); return ret; } static struct pcmcia_low_level neponset_pcmcia_ops = { .owner = THIS_MODULE, + .hw_init = neponset_pcmcia_hw_init, .configure_socket = neponset_pcmcia_configure_socket, .first = 0, .nr = 2, @@ -111,13 +75,6 @@ static struct pcmcia_low_level neponset_pcmcia_ops = { int pcmcia_neponset_init(struct sa1111_dev *sadev) { - /* - * Set GPIO_A<3:0> to be outputs for the MAX1600, - * and switch to standby mode. - */ - sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); - sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops); return sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops, sa11xx_drv_pcmcia_add_one); |