summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/clk/bcm/clk-bcm2835.c12
-rw-r--r--drivers/clk/clk-aspeed.c28
-rw-r--r--drivers/clk/clk.c46
-rw-r--r--drivers/clk/hisilicon/clk-hi3660-stub.c2
-rw-r--r--drivers/clk/imx/clk-imx51-imx53.c20
-rw-r--r--drivers/clk/qcom/apcs-msm8916.c5
-rw-r--r--drivers/clk/sunxi-ng/ccu-sun6i-a31.c6
-rw-r--r--drivers/clk/ti/clk-33xx.c2
-rw-r--r--drivers/clk/ti/clk-43xx.c2
-rw-r--r--drivers/clk/ti/clkctrl.c2
10 files changed, 81 insertions, 44 deletions
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 44301a3d9963..a07f6451694a 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -449,17 +449,17 @@ struct bcm2835_pll_ana_bits {
static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
.mask0 = 0,
.set0 = 0,
- .mask1 = (u32)~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
+ .mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK,
.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
- .mask3 = (u32)~A2W_PLL_KA_MASK,
+ .mask3 = A2W_PLL_KA_MASK,
.set3 = (2 << A2W_PLL_KA_SHIFT),
.fb_prediv_mask = BIT(14),
};
static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
- .mask0 = (u32)~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
+ .mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK,
.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
- .mask1 = (u32)~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
+ .mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK,
.set1 = (6 << A2W_PLLH_KP_SHIFT),
.mask3 = 0,
.set3 = 0,
@@ -623,8 +623,10 @@ static int bcm2835_pll_on(struct clk_hw *hw)
~A2W_PLL_CTRL_PWRDN);
/* Take the PLL out of reset. */
+ spin_lock(&cprman->regs_lock);
cprman_write(cprman, data->cm_ctrl_reg,
cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+ spin_unlock(&cprman->regs_lock);
/* Wait for the PLL to lock. */
timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
@@ -701,9 +703,11 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw,
}
/* Unmask the reference clock from the oscillator. */
+ spin_lock(&cprman->regs_lock);
cprman_write(cprman, A2W_XOSC_CTRL,
cprman_read(cprman, A2W_XOSC_CTRL) |
data->reference_enable_mask);
+ spin_unlock(&cprman->regs_lock);
if (do_ana_setup_first)
bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
index 9f7f931d6b2f..5eb50c31e455 100644
--- a/drivers/clk/clk-aspeed.c
+++ b/drivers/clk/clk-aspeed.c
@@ -205,6 +205,18 @@ static const struct aspeed_clk_soc_data ast2400_data = {
.calc_pll = aspeed_ast2400_calc_pll,
};
+static int aspeed_clk_is_enabled(struct clk_hw *hw)
+{
+ struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+ u32 clk = BIT(gate->clock_idx);
+ u32 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
+ u32 reg;
+
+ regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
+
+ return ((reg & clk) == enval) ? 1 : 0;
+}
+
static int aspeed_clk_enable(struct clk_hw *hw)
{
struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
@@ -215,6 +227,11 @@ static int aspeed_clk_enable(struct clk_hw *hw)
spin_lock_irqsave(gate->lock, flags);
+ if (aspeed_clk_is_enabled(hw)) {
+ spin_unlock_irqrestore(gate->lock, flags);
+ return 0;
+ }
+
if (gate->reset_idx >= 0) {
/* Put IP in reset */
regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
@@ -255,17 +272,6 @@ static void aspeed_clk_disable(struct clk_hw *hw)
spin_unlock_irqrestore(gate->lock, flags);
}
-static int aspeed_clk_is_enabled(struct clk_hw *hw)
-{
- struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
- u32 clk = BIT(gate->clock_idx);
- u32 reg;
-
- regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
-
- return (reg & clk) ? 0 : 1;
-}
-
static const struct clk_ops aspeed_clk_gate_ops = {
.enable = aspeed_clk_enable,
.disable = aspeed_clk_disable,
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 0f686a9dac3e..076d4244d672 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1125,8 +1125,10 @@ static int clk_core_round_rate_nolock(struct clk_core *core,
{
lockdep_assert_held(&prepare_lock);
- if (!core)
+ if (!core) {
+ req->rate = 0;
return 0;
+ }
clk_core_init_rate_req(core, req);
@@ -2309,8 +2311,11 @@ static int clk_core_set_phase_nolock(struct clk_core *core, int degrees)
trace_clk_set_phase(core, degrees);
- if (core->ops->set_phase)
+ if (core->ops->set_phase) {
ret = core->ops->set_phase(core->hw, degrees);
+ if (!ret)
+ core->phase = degrees;
+ }
trace_clk_set_phase_complete(core, degrees);
@@ -2968,22 +2973,37 @@ static int __clk_core_init(struct clk_core *core)
core->rate = core->req_rate = rate;
/*
+ * Enable CLK_IS_CRITICAL clocks so newly added critical clocks
+ * don't get accidentally disabled when walking the orphan tree and
+ * reparenting clocks
+ */
+ if (core->flags & CLK_IS_CRITICAL) {
+ unsigned long flags;
+
+ clk_core_prepare(core);
+
+ flags = clk_enable_lock();
+ clk_core_enable(core);
+ clk_enable_unlock(flags);
+ }
+
+ /*
* walk the list of orphan clocks and reparent any that newly finds a
* parent.
*/
hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
struct clk_core *parent = __clk_init_parent(orphan);
- unsigned long flags;
/*
- * we could call __clk_set_parent, but that would result in a
- * redundant call to the .set_rate op, if it exists
+ * We need to use __clk_set_parent_before() and _after() to
+ * to properly migrate any prepare/enable count of the orphan
+ * clock. This is important for CLK_IS_CRITICAL clocks, which
+ * are enabled during init but might not have a parent yet.
*/
if (parent) {
/* update the clk tree topology */
- flags = clk_enable_lock();
- clk_reparent(orphan, parent);
- clk_enable_unlock(flags);
+ __clk_set_parent_before(orphan, parent);
+ __clk_set_parent_after(orphan, parent, NULL);
__clk_recalc_accuracies(orphan);
__clk_recalc_rates(orphan, 0);
}
@@ -3000,16 +3020,6 @@ static int __clk_core_init(struct clk_core *core)
if (core->ops->init)
core->ops->init(core->hw);
- if (core->flags & CLK_IS_CRITICAL) {
- unsigned long flags;
-
- clk_core_prepare(core);
-
- flags = clk_enable_lock();
- clk_core_enable(core);
- clk_enable_unlock(flags);
- }
-
kref_init(&core->ref);
out:
clk_pm_runtime_put(core);
diff --git a/drivers/clk/hisilicon/clk-hi3660-stub.c b/drivers/clk/hisilicon/clk-hi3660-stub.c
index 9b6c72bbddf9..e8b2c43b1bb8 100644
--- a/drivers/clk/hisilicon/clk-hi3660-stub.c
+++ b/drivers/clk/hisilicon/clk-hi3660-stub.c
@@ -149,6 +149,8 @@ static int hi3660_stub_clk_probe(struct platform_device *pdev)
return PTR_ERR(stub_clk_chan.mbox);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
freq_reg = devm_ioremap(dev, res->start, resource_size(res));
if (!freq_reg)
return -ENOMEM;
diff --git a/drivers/clk/imx/clk-imx51-imx53.c b/drivers/clk/imx/clk-imx51-imx53.c
index c864992e6983..caa8bd40692c 100644
--- a/drivers/clk/imx/clk-imx51-imx53.c
+++ b/drivers/clk/imx/clk-imx51-imx53.c
@@ -131,7 +131,17 @@ static const char *ieee1588_sels[] = { "pll3_sw", "pll4_sw", "dummy" /* usbphy2_
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
-static struct clk ** const uart_clks[] __initconst = {
+static struct clk ** const uart_clks_mx51[] __initconst = {
+ &clk[IMX5_CLK_UART1_IPG_GATE],
+ &clk[IMX5_CLK_UART1_PER_GATE],
+ &clk[IMX5_CLK_UART2_IPG_GATE],
+ &clk[IMX5_CLK_UART2_PER_GATE],
+ &clk[IMX5_CLK_UART3_IPG_GATE],
+ &clk[IMX5_CLK_UART3_PER_GATE],
+ NULL
+};
+
+static struct clk ** const uart_clks_mx50_mx53[] __initconst = {
&clk[IMX5_CLK_UART1_IPG_GATE],
&clk[IMX5_CLK_UART1_PER_GATE],
&clk[IMX5_CLK_UART2_IPG_GATE],
@@ -321,8 +331,6 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
-
- imx_register_uart_clocks(uart_clks);
}
static void __init mx50_clocks_init(struct device_node *np)
@@ -388,6 +396,8 @@ static void __init mx50_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
+
+ imx_register_uart_clocks(uart_clks_mx50_mx53);
}
CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
@@ -477,6 +487,8 @@ static void __init mx51_clocks_init(struct device_node *np)
val = readl(MXC_CCM_CLPCR);
val |= 1 << 23;
writel(val, MXC_CCM_CLPCR);
+
+ imx_register_uart_clocks(uart_clks_mx51);
}
CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
@@ -606,5 +618,7 @@ static void __init mx53_clocks_init(struct device_node *np)
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
+
+ imx_register_uart_clocks(uart_clks_mx50_mx53);
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/drivers/clk/qcom/apcs-msm8916.c b/drivers/clk/qcom/apcs-msm8916.c
index 246957f1a413..b1cc8dbcd327 100644
--- a/drivers/clk/qcom/apcs-msm8916.c
+++ b/drivers/clk/qcom/apcs-msm8916.c
@@ -49,11 +49,10 @@ static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev)
struct clk_regmap_mux_div *a53cc;
struct regmap *regmap;
struct clk_init_data init = { };
- int ret;
+ int ret = -ENODEV;
regmap = dev_get_regmap(parent, NULL);
- if (IS_ERR(regmap)) {
- ret = PTR_ERR(regmap);
+ if (!regmap) {
dev_err(dev, "failed to get regmap: %d\n", ret);
return ret;
}
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 72b16ed1012b..3b97f60540ad 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -762,7 +762,7 @@ static struct ccu_mp out_a_clk = {
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("out-a",
clk_out_parents,
- &ccu_div_ops,
+ &ccu_mp_ops,
0),
},
};
@@ -783,7 +783,7 @@ static struct ccu_mp out_b_clk = {
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("out-b",
clk_out_parents,
- &ccu_div_ops,
+ &ccu_mp_ops,
0),
},
};
@@ -804,7 +804,7 @@ static struct ccu_mp out_c_clk = {
.features = CCU_FEATURE_FIXED_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("out-c",
clk_out_parents,
- &ccu_div_ops,
+ &ccu_mp_ops,
0),
},
};
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index 612491a26070..12e0a2d19911 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -45,7 +45,7 @@ static const struct omap_clkctrl_bit_data am3_gpio4_bit_data[] __initconst = {
static const struct omap_clkctrl_reg_data am3_l4_per_clkctrl_regs[] __initconst = {
{ AM3_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
- { AM3_LCDC_CLKCTRL, NULL, CLKF_SW_SUP, "lcd_gclk", "lcdc_clkdm" },
+ { AM3_LCDC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "lcd_gclk", "lcdc_clkdm" },
{ AM3_USB_OTG_HS_CLKCTRL, NULL, CLKF_SW_SUP, "usbotg_fck", "l3s_clkdm" },
{ AM3_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
{ AM3_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_div2_ck", "l3_clkdm" },
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 2b7c2e017665..63c5ddb50187 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -187,7 +187,7 @@ static const struct omap_clkctrl_reg_data am4_l4_per_clkctrl_regs[] __initconst
{ AM4_OCP2SCP0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
{ AM4_OCP2SCP1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
{ AM4_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_ck", "emif_clkdm" },
- { AM4_DSS_CORE_CLKCTRL, NULL, CLKF_SW_SUP, "disp_clk", "dss_clkdm" },
+ { AM4_DSS_CORE_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "disp_clk", "dss_clkdm" },
{ AM4_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
{ 0 },
};
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index afa0d6bfc5c1..421b05392220 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -537,6 +537,8 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
init.parent_names = &reg_data->parent;
init.num_parents = 1;
init.flags = 0;
+ if (reg_data->flags & CLKF_SET_RATE_PARENT)
+ init.flags |= CLK_SET_RATE_PARENT;
init.name = kasprintf(GFP_KERNEL, "%s:%s:%04x:%d",
node->parent->name, node->name,
reg_data->offset, 0);