diff options
| -rw-r--r-- | drivers/mtd/onenand/onenand_base.c | 56 | ||||
| -rw-r--r-- | include/linux/mtd/onenand.h | 2 |
2 files changed, 44 insertions, 14 deletions
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 3fab4d1b68bd..51fb84055ba3 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -192,8 +192,6 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le struct onenand_chip *this = mtd->priv; int value, readcmd = 0, block_cmd = 0; int block, page; - /* Now we use page size operation */ - int sectors = 4, count = 4; /* Address translation */ switch (cmd) { @@ -245,6 +243,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le } if (page != -1) { + /* Now we use page size operation */ + int sectors = 4, count = 4; int dataram; switch (cmd) { @@ -914,6 +914,10 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr) void __iomem *dataram0, *dataram1; int ret = 0; + /* In partial page write, just skip it */ + if ((addr & (mtd->writesize - 1)) != 0) + return 0; + this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize); ret = this->wait(mtd, FL_READING); @@ -936,7 +940,7 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr) #define onenand_verify_oob(...) (0) #endif -#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0) +#define NOTALIGNED(x) ((x & (this->subpagesize - 1)) != 0) /** * onenand_write - [MTD Interface] write buffer to FLASH @@ -954,6 +958,7 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, struct onenand_chip *this = mtd->priv; int written = 0; int ret = 0; + int column, subpage; DEBUG(MTD_DEBUG_LEVEL3, "onenand_write: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); @@ -972,45 +977,61 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, return -EINVAL; } + column = to & (mtd->writesize - 1); + subpage = column || (len & (mtd->writesize - 1)); + /* Grab the lock and see if the device is available */ onenand_get_device(mtd, FL_WRITING); /* Loop until all data write */ while (written < len) { - int thislen = min_t(int, mtd->writesize, len - written); - - this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize); + int bytes = mtd->writesize; + int thislen = min_t(int, bytes, len - written); + u_char *wbuf = (u_char *) buf; + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, bytes); + + /* Partial page write */ + if (subpage) { + bytes = min_t(int, bytes - column, (int) len); + memset(this->page_buf, 0xff, mtd->writesize); + memcpy(this->page_buf + column, buf, bytes); + wbuf = this->page_buf; + /* Even though partial write, we need page size */ + thislen = mtd->writesize; + } - this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen); + this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, thislen); this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); - onenand_update_bufferram(mtd, to, 1); + /* In partial page write we don't update bufferram */ + onenand_update_bufferram(mtd, to, !subpage); ret = this->wait(mtd, FL_WRITING); if (ret) { DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret); - goto out; + break; } - written += thislen; - /* Only check verify write turn on */ - ret = onenand_verify_page(mtd, (u_char *) buf, to); + ret = onenand_verify_page(mtd, (u_char *) wbuf, to); if (ret) { DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret); - goto out; + break; } + written += thislen; + if (written == len) break; + column = 0; to += thislen; buf += thislen; } -out: /* Deselect and wake up anyone waiting on the device */ onenand_release_device(mtd); @@ -2021,23 +2042,30 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) init_waitqueue_head(&this->wq); spin_lock_init(&this->chip_lock); + /* + * Allow subpage writes up to oobsize. + */ switch (mtd->oobsize) { case 64: this->ecclayout = &onenand_oob_64; + mtd->subpage_sft = 2; break; case 32: this->ecclayout = &onenand_oob_32; + mtd->subpage_sft = 1; break; default: printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n", mtd->oobsize); + mtd->subpage_sft = 0; /* To prevent kernel oops */ this->ecclayout = &onenand_oob_32; break; } + this->subpagesize = mtd->writesize >> mtd->subpage_sft; mtd->ecclayout = this->ecclayout; /* Fill in remaining MTD driver data */ diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 62ca0f429822..fe3500d7d4bb 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -88,6 +88,7 @@ struct onenand_bufferram { * operation is in progress * @state: [INTERN] the current state of the OneNAND device * @page_buf: data buffer + * @subpagesize: [INTERN] holds the subpagesize * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbm: [REPLACEABLE] pointer to Bad Block Management * @priv: [OPTIONAL] pointer to private chip date @@ -128,6 +129,7 @@ struct onenand_chip { onenand_state_t state; unsigned char *page_buf; + int subpagesize; struct nand_ecclayout *ecclayout; void *bbm; |