diff options
| -rw-r--r-- | Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 9 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 119 |
3 files changed, 129 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index 8ba98eec765b..c42d2cebac8e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -13,6 +13,12 @@ Required properties: - interrupt-parent : Interrupt controller to which the chip is connected - interrupts : Interrupt to which the chip is connected +Optional properties: + + - irq-gpios : GPIO pin used for IRQ. The driver uses the + interrupt gpio pin as output to reset the device. + - reset-gpios : GPIO pin used for reset + Example: i2c@00000000 { @@ -23,6 +29,9 @@ Example: reg = <0x5d>; interrupt-parent = <&gpio>; interrupts = <0 0>; + + irq-gpios = <&gpio1 0 0>; + reset-gpios = <&gpio1 1 0>; }; /* ... */ diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index ae33da7ab51f..709527cd4c2e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -324,6 +324,7 @@ config TOUCHSCREEN_FUJITSU config TOUCHSCREEN_GOODIX tristate "Goodix I2C touchscreen" depends on I2C + depends on GPIOLIB help Say Y here if you have the Goodix touchscreen (such as one installed in Onda v975w tablets) connected to your diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 5479aa17dba8..6ad379aace72 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/dmi.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/input/mt.h> @@ -37,8 +38,13 @@ struct goodix_ts_data { unsigned int int_trigger_type; bool rotated_screen; int cfg_len; + struct gpio_desc *gpiod_int; + struct gpio_desc *gpiod_rst; }; +#define GOODIX_GPIO_INT_NAME "irq" +#define GOODIX_GPIO_RST_NAME "reset" + #define GOODIX_MAX_HEIGHT 4096 #define GOODIX_MAX_WIDTH 4096 #define GOODIX_INT_TRIGGER 1 @@ -239,6 +245,106 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int goodix_int_sync(struct goodix_ts_data *ts) +{ + int error; + + error = gpiod_direction_output(ts->gpiod_int, 0); + if (error) + return error; + + msleep(50); /* T5: 50ms */ + + error = gpiod_direction_input(ts->gpiod_int); + if (error) + return error; + + return 0; +} + +/** + * goodix_reset - Reset device during power on + * + * @ts: goodix_ts_data pointer + */ +static int goodix_reset(struct goodix_ts_data *ts) +{ + int error; + + /* begin select I2C slave addr */ + error = gpiod_direction_output(ts->gpiod_rst, 0); + if (error) + return error; + + msleep(20); /* T2: > 10ms */ + + /* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */ + error = gpiod_direction_output(ts->gpiod_int, ts->client->addr == 0x14); + if (error) + return error; + + usleep_range(100, 2000); /* T3: > 100us */ + + error = gpiod_direction_output(ts->gpiod_rst, 1); + if (error) + return error; + + usleep_range(6000, 10000); /* T4: > 5ms */ + + /* end select I2C slave addr */ + error = gpiod_direction_input(ts->gpiod_rst); + if (error) + return error; + + error = goodix_int_sync(ts); + if (error) + return error; + + return 0; +} + +/** + * goodix_get_gpio_config - Get GPIO config from ACPI/DT + * + * @ts: goodix_ts_data pointer + */ +static int goodix_get_gpio_config(struct goodix_ts_data *ts) +{ + int error; + struct device *dev; + struct gpio_desc *gpiod; + + if (!ts->client) + return -EINVAL; + dev = &ts->client->dev; + + /* Get the interrupt GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_INT_NAME, error); + return error; + } + + ts->gpiod_int = gpiod; + + /* Get the reset line GPIO pin number */ + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_IN); + if (IS_ERR(gpiod)) { + error = PTR_ERR(gpiod); + if (error != -EPROBE_DEFER) + dev_dbg(dev, "Failed to get %s GPIO: %d\n", + GOODIX_GPIO_RST_NAME, error); + return error; + } + + ts->gpiod_rst = gpiod; + + return 0; +} + /** * goodix_read_config - Read the embedded configuration of the panel * @@ -407,6 +513,19 @@ static int goodix_ts_probe(struct i2c_client *client, ts->client = client; i2c_set_clientdata(client, ts); + error = goodix_get_gpio_config(ts); + if (error) + return error; + + if (ts->gpiod_int && ts->gpiod_rst) { + /* reset the controller */ + error = goodix_reset(ts); + if (error) { + dev_err(&client->dev, "Controller reset failed.\n"); + return error; + } + } + error = goodix_i2c_test(client); if (error) { dev_err(&client->dev, "I2C communication failure: %d\n", error); |