diff options
-rw-r--r-- | drivers/clk/rockchip/clk-pll.c | 50 | ||||
-rw-r--r-- | drivers/clk/rockchip/clk.h | 6 |
2 files changed, 56 insertions, 0 deletions
diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c index 1bb68910a76b..f8d3baf275b2 100644 --- a/drivers/clk/rockchip/clk-pll.c +++ b/drivers/clk/rockchip/clk-pll.c @@ -258,6 +258,55 @@ static int rockchip_rk3066_pll_is_enabled(struct clk_hw *hw) return !(pllcon & RK3066_PLLCON3_PWRDOWN); } +static void rockchip_rk3066_pll_init(struct clk_hw *hw) +{ + struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw); + const struct rockchip_pll_rate_table *rate; + unsigned int nf, nr, no, bwadj; + unsigned long drate; + u32 pllcon; + + if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE)) + return; + + drate = __clk_get_rate(hw->clk); + rate = rockchip_get_pll_settings(pll, drate); + + /* when no rate setting for the current rate, rely on clk_set_rate */ + if (!rate) + return; + + pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(0)); + nr = ((pllcon >> RK3066_PLLCON0_NR_SHIFT) & RK3066_PLLCON0_NR_MASK) + 1; + no = ((pllcon >> RK3066_PLLCON0_OD_SHIFT) & RK3066_PLLCON0_OD_MASK) + 1; + + pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(1)); + nf = ((pllcon >> RK3066_PLLCON1_NF_SHIFT) & RK3066_PLLCON1_NF_MASK) + 1; + + pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(2)); + bwadj = (pllcon >> RK3066_PLLCON2_BWADJ_SHIFT) & RK3066_PLLCON2_BWADJ_MASK; + + pr_debug("%s: pll %s@%lu: nr (%d:%d); no (%d:%d); nf(%d:%d), bwadj(%d:%d)\n", + __func__, __clk_get_name(hw->clk), drate, rate->nr, nr, + rate->no, no, rate->nf, nf, rate->bwadj, bwadj); + if (rate->nr != nr || rate->no != no || rate->nf != nf + || rate->bwadj != bwadj) { + struct clk *parent = __clk_get_parent(hw->clk); + unsigned long prate; + + if (!parent) { + pr_warn("%s: parent of %s not available\n", + __func__, __clk_get_name(hw->clk)); + return; + } + + pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n", + __func__, __clk_get_name(hw->clk)); + prate = __clk_get_rate(parent); + rockchip_rk3066_pll_set_rate(hw, drate, prate); + } +} + static const struct clk_ops rockchip_rk3066_pll_clk_norate_ops = { .recalc_rate = rockchip_rk3066_pll_recalc_rate, .enable = rockchip_rk3066_pll_enable, @@ -272,6 +321,7 @@ static const struct clk_ops rockchip_rk3066_pll_clk_ops = { .enable = rockchip_rk3066_pll_enable, .disable = rockchip_rk3066_pll_disable, .is_enabled = rockchip_rk3066_pll_is_enabled, + .init = rockchip_rk3066_pll_init, }; /* diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index eefd39a3820b..dc9468132ef1 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -92,6 +92,10 @@ struct rockchip_pll_rate_table { * @type: Type of PLL to be registered. * @pll_flags: hardware-specific flags * @rate_table: Table of usable pll rates + * + * Flags: + * ROCKCHIP_PLL_SYNC_RATE - check rate parameters to match against the + * rate_table parameters and ajust them if necessary. */ struct rockchip_pll_clock { unsigned int id; @@ -108,6 +112,8 @@ struct rockchip_pll_clock { struct rockchip_pll_rate_table *rate_table; }; +#define ROCKCHIP_PLL_SYNC_RATE BIT(0) + #define PLL(_type, _id, _name, _pnames, _flags, _con, _mode, _mshift, \ _lshift, _pflags, _rtable) \ { \ |