diff options
215 files changed, 11485 insertions, 1758 deletions
diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README index 4dc66c173e10..17453794fca5 100644 --- a/Documentation/arm/Marvell/README +++ b/Documentation/arm/Marvell/README @@ -103,6 +103,10 @@ EBU Armada family NOTE: not to be confused with the non-SMP 78xx0 SoCs Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf Functional Spec: http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf + Hardware Specs: + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF Core: Sheeva ARMv7 compatible diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt new file mode 100644 index 000000000000..d0ce01da5c59 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt @@ -0,0 +1,15 @@ +Altera SOCFPGA SDRAM Error Detection & Correction [EDAC] +The EDAC accesses a range of registers in the SDRAM controller. + +Required properties: +- compatible : should contain "altr,sdram-edac"; +- altr,sdr-syscon : phandle of the sdr module +- interrupts : Should contain the SDRAM ECC IRQ in the + appropriate format for the IRQ controller. + +Example: + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt new file mode 100644 index 000000000000..7eece72b1a35 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -0,0 +1,8 @@ +Amlogic MesonX device tree bindings +------------------------------------------- + +Boards with the Amlogic Meson6 SoC shall have the following properties: + +Required root node property: + +compatible = "amlogic,meson6"; diff --git a/Documentation/devicetree/bindings/arm/geniatech.txt b/Documentation/devicetree/bindings/arm/geniatech.txt new file mode 100644 index 000000000000..74ccba40b73b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/geniatech.txt @@ -0,0 +1,5 @@ +Geniatech platforms device tree bindings +------------------------------------------- + +Geniatech ATV1200 + - compatible = "geniatech,atv1200" diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index d6ac71f37314..fa252261dfaf 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -6,3 +6,9 @@ Required root node property: compatible: must contain "mediatek,mt6589" + +Supported boards: + +- bq Aquaris5 smart phone: + Required root node properties: + - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 0edc90305dfe..ddd9bcdf889c 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -85,6 +85,18 @@ SoCs: - DRA722 compatible = "ti,dra722", "ti,dra72", "ti,dra7" +- AM5728 + compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" + +- AM5726 + compatible = "ti,am5726", "ti,dra742", "ti,dra74", "ti,dra7" + +- AM5718 + compatible = "ti,am5718", "ti,dra722", "ti,dra72", "ti,dra7" + +- AM5716 + compatible = "ti,am5716", "ti,dra722", "ti,dra72", "ti,dra7" + - AM4372 compatible = "ti,am4372", "ti,am43" diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt new file mode 100644 index 000000000000..51147cb5c036 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -0,0 +1,71 @@ +Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings +-------------------------------------------------------------------- + +SoCs: + + - Emma Mobile EV2 + compatible = "renesas,emev2" + - RZ/A1H (R7S72100) + compatible = "renesas,r7s72100" + - SH-Mobile AP4 (R8A73720/SH7372) + compatible = "renesas,sh7372" + - SH-Mobile AG5 (R8A73A00/SH73A0) + compatible = "renesas,sh73a0" + - R-Mobile APE6 (R8A73A40) + compatible = "renesas,r8a73a4" + - R-Mobile A1 (R8A77400) + compatible = "renesas,r8a7740" + - R-Car M1A (R8A77781) + compatible = "renesas,r8a7778" + - R-Car H1 (R8A77790) + compatible = "renesas,r8a7779" + - R-Car H2 (R8A77900) + compatible = "renesas,r8a7790" + - R-Car M2-W (R8A77910) + compatible = "renesas,r8a7791" + - R-Car V2H (R8A77920) + compatible = "renesas,r8a7792" + - R-Car M2-N (R8A77930) + compatible = "renesas,r8a7793" + - R-Car E2 (R8A77940) + compatible = "renesas,r8a7794" + + +Boards: + + - Alt + compatible = "renesas,alt", "renesas,r8a7794" + - APE6-EVM + compatible = "renesas,ape6evm", "renesas,r8a73a4" + - APE6-EVM - Reference Device Tree Implementation + compatible = "renesas,ape6evm-reference", "renesas,r8a73a4" + - Atmark Techno Armadillo-800 EVA + compatible = "renesas,armadillo800eva" + - BOCK-W + compatible = "renesas,bockw", "renesas,r8a7778" + - BOCK-W - Reference Device Tree Implementation + compatible = "renesas,bockw-reference", "renesas,r8a7778" + - Genmai (RTK772100BC00000BR) + compatible = "renesas,genmai", "renesas,r7s72100" + - Gose + compatible = "renesas,gose", "renesas,r8a7793" + - Henninger + compatible = "renesas,henninger", "renesas,r8a7791" + - Koelsch (RTP0RC7791SEB00010S) + compatible = "renesas,koelsch", "renesas,r8a7791" + - Kyoto Microcomputer Co. KZM-A9-Dual + compatible = "renesas,kzm9d", "renesas,emev2" + - Kyoto Microcomputer Co. KZM-A9-GT + compatible = "renesas,kzm9g", "renesas,sh73a0" + - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation + compatible = "renesas,kzm9g-reference", "renesas,sh73a0" + - Lager (RTP0RC7790SEB00010S) + compatible = "renesas,lager", "renesas,r8a7790" + - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd) + compatible = "renesas,mackerel" + - Marzen + compatible = "renesas,marzen", "renesas,r8a7779" + +Note: Reference Device Tree Implementations are temporary implementations + to ease the migration from platform devices to Device Tree, and are + intended to be removed in the future. diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 6af570ec53b4..5af3d9df6ecb 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -44,7 +44,7 @@ dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O dallas,ds75 Digital Thermometer and Thermostat -dialog,da9053 DA9053: flexible system level PMIC with multicore support +dlg,da9053 DA9053: flexible system level PMIC with multicore support epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 9455fd0ec830..6fbba53a309b 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -17,7 +17,9 @@ Example: pcie@0x01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x4000>; + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt index f120f229d67d..3297c53cb915 100644 --- a/Documentation/devicetree/bindings/regulator/da9210.txt +++ b/Documentation/devicetree/bindings/regulator/da9210.txt @@ -2,7 +2,7 @@ Required properties: -- compatible: must be "diasemi,da9210" +- compatible: must be "dlg,da9210" - reg: the i2c slave address of the regulator. It should be 0x68. Any standard regulator properties can be used to configure the single da9210 @@ -11,7 +11,7 @@ DCDC. Example: da9210@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <900000>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 24d0f696eefc..653beaa392dc 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -14,6 +14,7 @@ allwinner Allwinner Technology Co., Ltd. altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. +amlogic Amlogic, Inc. ams AMS AG amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) @@ -39,6 +40,7 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor) davicom DAVICOM Semiconductor, Inc. denx Denx Software Engineering digi Digi International Inc. +dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG ebv EBV Elektronik @@ -54,6 +56,7 @@ fcs Fairchild Semiconductor fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. +geniatech Geniatech, Inc. globalscale Globalscale Technologies, Inc. gmt Global Mixed-mode Technology, Inc. google Google, Inc. diff --git a/MAINTAINERS b/MAINTAINERS index 7c4a2037f7ff..d172f636df24 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1392,12 +1392,15 @@ F: arch/arm/mach-shmobile/ F: drivers/sh/ ARM/SOCFPGA ARCHITECTURE -M: Dinh Nguyen <dinguyen@altera.com> +M: Dinh Nguyen <dinguyen@opensource.altera.com> S: Maintained F: arch/arm/mach-socfpga/ +W: http://www.rocketboards.org +T: git://git.rocketboards.org/linux-socfpga.git +T: git://git.rocketboards.org/linux-socfpga-next.git ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT -M: Dinh Nguyen <dinguyen@altera.com> +M: Dinh Nguyen <dinguyen@opensource.altera.com> S: Maintained F: drivers/clk/socfpga/ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d3e687ecfc95..7c80af906897 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -163,8 +163,11 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-ts419-6282.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ + imx1-ads.dtb \ + imx1-apf9328.dtb \ imx25-eukrea-mbimxsd25-baseboard.dtb \ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ @@ -203,6 +206,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ imx6dl-gw54xx.dtb \ + imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ @@ -227,6 +231,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-gw53xx.dtb \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ + imx6q-gw552x.dtb \ + imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ @@ -244,7 +250,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ - vf610-colibri.dtb \ + vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -290,7 +296,11 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-devkit8000.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ - omap3-gta04.dtb \ + omap3-gta04a3.dtb \ + omap3-gta04a4.dtb \ + omap3-gta04a5.dtb \ + omap3-ha.dtb \ + omap3-ha-lcd.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ omap3-ldp.dtb \ @@ -313,6 +323,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ omap3-sbc-t3517.dtb \ omap3-sbc-t3530.dtb \ omap3-sbc-t3730.dtb \ + omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-bone.dtb \ @@ -345,7 +356,9 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ @@ -379,7 +392,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ - r8a7779-marzen.dtb + r8a7779-marzen.dtb \ + r8a7794-alt.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ @@ -410,6 +424,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb dtb-$(CONFIG_MACH_SUN6I) += \ @@ -420,7 +435,9 @@ dtb-$(CONFIG_MACH_SUN6I) += \ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ + sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-pcduino3.dtb dtb-$(CONFIG_MACH_SUN8I) += \ @@ -444,6 +461,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra114-roth.dtb \ tegra114-tn7.dtb \ tegra124-jetson-tk1.dtb \ + tegra124-nyan-big.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ @@ -495,6 +513,7 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb targets += dtbs dtbs_install targets += $(dtb-y) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index d9d98697cca9..6cc25ed912ee 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -224,6 +224,7 @@ &tps { regulators { dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; regulator-always-on; }; @@ -246,18 +247,22 @@ }; ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index c8238c467acf..9e7d45571cd5 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -354,6 +354,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 24531de979f2..46660ffd2b65 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -58,10 +58,12 @@ }; am43xx_pinmux: pinmux@44e10800 { - compatible = "pinctrl-single"; + compatible = "ti,am437-padconf", "pinctrl-single"; reg = <0x44e10800 0x31c>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; @@ -168,6 +170,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; }; timer1: timer@44e31000 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 416f4e5a69c1..a495e5821ab8 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -43,6 +43,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -53,11 +55,15 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 097df7d8f0f6..2b6d24e0d1e8 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -91,6 +91,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -100,11 +102,15 @@ }; }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 285524fb915e..3aebd93cc33c 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -101,12 +101,16 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -122,7 +126,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 4ec1ce561d34..c2f414bb9aba 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -86,6 +86,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; @@ -96,12 +98,16 @@ }; ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -117,7 +123,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 4169f4096ea3..f57a8f841498 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -9,6 +9,15 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. */ /dts-v1/; @@ -30,7 +39,7 @@ }; soc { - ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; pcie-controller { @@ -50,6 +59,18 @@ }; internal-regs { + pinctrl { + fan_pins: fan-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + led_pins: led-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + }; + serial@12000 { status = "okay"; }; @@ -59,6 +80,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -74,6 +97,8 @@ phy-mode = "sgmii"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -106,6 +131,26 @@ }; }; + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 3000 1>; + pinctrl-0 = <&fan_pins>; + pinctrl-names = "default"; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + sw_led { + label = "370rd:green:sw"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + nand@d0000 { status = "okay"; num-cs = <1>; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 23227e0027ec..83286ec9702c 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -110,7 +110,7 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10600 0x28>; #address-cells = <1>; #size-cells = <0>; @@ -121,7 +121,7 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10680 0x28>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 21b588b6f6bd..6b3c23b1e138 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -151,6 +151,25 @@ "mpp62", "mpp60", "mpp58"; marvell,function = "audio"; }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp17", "mpp18"; + marvell,function = "ge"; + }; + + ge0_rgmii_pins: ge0-rgmii-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge1-rgmii-pins { + marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27", "mpp28", "mpp29", "mpp30"; + marvell,function = "ge1"; + }; }; gpio0: gpio@18100 { @@ -206,6 +225,10 @@ status = "okay"; }; + sscg@18330 { + reg = <0x18330 0x4>; + }; + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index c1e49e7bf0fa..de6571445cef 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -185,6 +185,12 @@ }; }; + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + }; + spi0: spi@10600 { compatible = "marvell,orion-spi"; reg = <0x10600 0x50>; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index c5ed85a70ed9..7d8f32873e82 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -174,7 +174,7 @@ status = "okay"; isl12057: isl12057@68 { - compatible = "isl,isl12057"; + compatible = "isil,isl12057"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 5e95a8053445..d68b3c4862bc 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -345,10 +345,14 @@ }; }; - ramc: ramc@ffffe200 { + ramc0: ramc@ffffe200 { compatible = "atmel,at91sam9260-sdramc"; - reg = <0xffffe200 0x200 - 0xffffe800 0x200>; + reg = <0xffffe200 0x200>; + }; + + ramc1: ramc@ffffe800 { + compatible = "atmel,at91sam9260-sdramc"; + reg = <0xffffe800 0x200>; }; pit: timer@fffffd30 { diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 4e0abbd9d655..a50ee587a7af 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -22,6 +22,10 @@ compatible = "atmel,at91sam9g20-i2c"; }; + ssc0: ssc@fffbc000 { + compatible = "atmel,at91sam9rl-ssc"; + }; + adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 932a669156af..d3f65130a1f8 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -96,8 +96,14 @@ ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; - reg = <0xffffe400 0x200 - 0xffffe600 0x200>; + reg = <0xffffe400 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; + }; + + ramc1: ramc@ffffe600 { + compatible = "atmel,at91sam9g45-ddramc"; + reg = <0xffffe600 0x200>; clocks = <&ddrck>; clock-names = "ddrck"; }; @@ -159,7 +165,7 @@ compatible = "atmel,at91rm9200-clk-master"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MCKRDY>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; atmel,clk-output-range = <0 133333333>; atmel,clk-divisors = <1 2 4 3>; }; @@ -175,7 +181,7 @@ #address-cells = <1>; #size-cells = <0>; interrupt-parent = <&pmc>; - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; prog0: prog0 { #clock-cells = <0>; @@ -1159,6 +1165,39 @@ atmel,can-isoc; }; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@fffffdb0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffdb0 0x30>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; }; fb0: fb@0x00500000 { diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 96ccc7de4f0a..d8dd22651090 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -160,6 +160,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_leds>; }; + + rtc@fffffdb0 { + status = "okay"; + }; }; fb0: fb@0x00500000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 2bfac310dbec..68eb9aded164 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -87,6 +87,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 83d723711ae1..13bb24ea971a 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -136,6 +136,8 @@ }; usb0: ohci@00500000 { + num-ports = <1>; + atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ab56c8b81dfa..f0b4352650ed 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -204,7 +204,7 @@ }; ssc0: ssc@fffc0000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc0000 0x4000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; @@ -213,7 +213,7 @@ }; ssc1: ssc@fffc4000 { - compatible = "atmel,at91rm9200-ssc"; + compatible = "atmel,at91sam9rl-ssc"; reg = <0xfffc4000 0x4000>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index e1a5c70b885c..726274f7959b 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -95,6 +95,8 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { @@ -966,7 +968,7 @@ adc0: adc@f804c000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9260-adc"; + compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&adc_clk>, diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 2a3b1c1313a0..58a0d60b95f1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -23,7 +23,7 @@ &gpio { pinctrl-names = "default"; - pinctrl-0 = <&gpioout &alt0 &alt3>; + pinctrl-0 = <&gpioout &alt0 &alt2 &alt3>; gpioout: gpioout { brcm,pins = <6>; @@ -39,6 +39,12 @@ brcm,pins = <48 49 50 51 52 53>; brcm,function = <7>; /* alt3 */ }; + + /* I2S interface */ + alt2: alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <6>; /* alt2 */ + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index b8473c43e888..3342cb1407bc 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -99,6 +99,7 @@ dmas = <&dma 2>, <&dma 3>; dma-names = "tx", "rx"; + status = "disabled"; }; spi: spi@7e204000 { diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi new file mode 100644 index 000000000000..acd4fe1833f2 --- /dev/null +++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi @@ -0,0 +1,44 @@ +/* + * Thermistor dts fragment for devices that use Thermistors as + * children of the IIO based ADC. + * + * Currently, used by Exynos5420 based Peach PIT and + * Exynos5800 based Peach PI. + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&adc { + ncp15wb473@3 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; + ncp15wb473@4 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + ncp15wb473@5 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 5>; + }; + ncp15wb473@6 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 6>; + }; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1e11e5a5f723..4f935ad9f27b 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -17,6 +17,18 @@ soc { pmx_core: pinmux@1c14120 { status = "okay"; + + mcasp0_pins: pinmux_mcasp0_pins { + pinctrl-single,bits = < + /* + * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR, + * AFSR, AMUTE + */ + 0x00 0x11111111 0xffffffff + /* AXR11, AXR12 */ + 0x04 0x00011000 0x000ff000 + >; + }; }; serial0: serial@1c42000 { status = "okay"; @@ -39,6 +51,20 @@ tps: tps@48 { reg = <0x48>; }; + tlv320aic3106: tlv320aic3106@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x18>; + status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vdcdc2_reg>; + /* Derived from VBAT: Baseboard 3.3V / 1.8V */ + AVDD-supply = <&vbat>; + DRVDD-supply = <&vbat>; + DVDD-supply = <&vbat>; + }; + }; wdt: wdt@1c21000 { status = "okay"; @@ -117,6 +143,33 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "DA850/OMAP-L138 EVM"; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out"; + simple-audio-card,routing = + "LINE1L", "Line In", + "LINE1R", "Line In", + "Line Out", "LLOUT", + "Line Out", "RLOUT"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + system-clock-frequency = <24576000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24576000>; + }; + }; }; /include/ "tps6507x.dtsi" @@ -170,3 +223,22 @@ }; }; }; + +&mcasp0 { + #sound-dai-cells = <0>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index b695548dbb4e..0bd98cd00816 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -150,6 +150,12 @@ }; }; + edma0: edma@01c00000 { + compatible = "ti,edma3"; + reg = <0x0 0x10000>; + interrupts = <11 13 12>; + #dma-cells = <1>; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; @@ -270,6 +276,19 @@ ti,davinci-gpio-unbanked = <0>; status = "disabled"; }; + + mcasp0: mcasp@01d00000 { + compatible = "ti,da830-mcasp-audio"; + reg = <0x100000 0x2000>, + <0x102000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <54>; + interrupt-names = "common"; + status = "disabled"; + dmas = <&edma0 1>, + <&edma0 0>; + dma-names = "tx", "rx"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index b40cdadb1f87..c6ce6258434f 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -323,6 +323,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; }; &uart2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e09b1afdaef2..9cc98436a982 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -218,10 +218,12 @@ }; dra7_pmx_core: pinmux@4a003400 { - compatible = "pinctrl-single"; + compatible = "ti,dra7-padconf", "pinctrl-single"; reg = <0x4a003400 0x0464>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x3fffffff>; }; @@ -329,7 +331,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -338,7 +340,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -347,7 +349,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -356,7 +358,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -365,7 +367,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -374,7 +376,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -383,7 +385,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; - interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -392,7 +394,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; - interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -401,7 +403,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -410,7 +412,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; - interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 514702348818..41074288adfa 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -19,6 +19,126 @@ }; }; +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> TP1017 (UNUSED) */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + }; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index f1ec22f6ebf4..e5a3d23a3df1 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -22,4 +22,9 @@ reg = <0>; }; }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index a4e8bb9f95c0..3be544c4891f 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -38,4 +38,10 @@ reg = <1>; }; }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index adadaf97ac01..c697ff01ae8d 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -54,17 +54,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; watchdog@10060000 { diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index e925c9fbfb07..de15114fd07c 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -137,17 +137,13 @@ status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; codec@13400000 { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 11967f4561e0..5e066cd87f66 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -520,7 +520,6 @@ mmc@12550000 { num-slots = <1>; - supports-highspeed; broken-cd; non-removable; card-detect-delay = <200>; @@ -532,11 +531,8 @@ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; serial@13800000 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index d0de1f50d15b..3acd97eb6630 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -401,7 +401,6 @@ mmc_0: mmc@12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -410,17 +409,13 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc_2: mmc@12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -428,12 +423,9 @@ vmmc-supply = <&mmc_reg>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; i2s0: i2s@03830000 { @@ -570,8 +562,4 @@ connect-gpios = <&gpd1 7 1>; }; }; - - usb@12110000 { - usb-phy = <&usb2_phy>; - }; }; diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi deleted file mode 100644 index e603e9c70142..000000000000 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Common device tree include for all Exynos 5250 boards based off of Daisy. - * - * Copyright (c) 2012 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/ { - aliases { - }; - - memory { - reg = <0x40000000 0x80000000>; - }; - - chosen { - }; - - pinctrl@11400000 { - /* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ - i2c2_bus: i2c2-bus { - samsung,pin-pud = <0>; - }; - }; - - i2c@12C60000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - }; - - i2c@12C70000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - }; - - i2c@12C80000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - i2c@12C90000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CA0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CB0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CD0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - }; - - i2c@12CE0000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; - }; - - mmc@12200000 { - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; - }; - - mmc@12220000 { - num-slots = <1>; - supports-highspeed; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - wp-gpios = <&gpc2 1 0>; - }; - }; - - mmc@12230000 { - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - /* See board-specific dts files for pin setup */ - - slot@0 { - reg = <0>; - bus-width = <4>; - }; - }; - - spi_1: spi@12d30000 { - status = "okay"; - samsung,spi-src-clk = <0>; - num-cs = <1>; - }; - - hdmi { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power { - label = "Power"; - gpios = <&gpx1 3 1>; - linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; - }; - }; -}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index b4b35adae565..6a0f4c0ff763 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -284,7 +284,6 @@ mmc@12200000 { status = "okay"; num-slots = <1>; - supports-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -292,29 +291,22 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; num-slots = <1>; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; }; spi_1: spi@12d30000 { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index f2b8c4116541..e51fcef884a4 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,8 +9,8 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "exynos5250.dtsi" -#include "exynos5250-cros-common.dtsi" / { model = "Google Snow"; @@ -20,6 +20,13 @@ i2c104 = &i2c_104; }; + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + }; + rtc@101E0000 { status = "okay"; }; @@ -93,6 +100,13 @@ gpio-keys { compatible = "gpio-keys"; + power { + label = "Power"; + gpios = <&gpx1 3 1>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + lid-switch { label = "Lid"; gpios = <&gpx3 5 1>; @@ -181,7 +195,7 @@ dcdc3 { ti,enable-ext-control; }; - fet1 { + fet1: fet1 { regulator-name = "vcd_led"; ti,overcurrent-wait = <3>; }; @@ -204,7 +218,7 @@ regulator-always-on; ti,overcurrent-wait = <3>; }; - fet6 { + fet6: fet6 { regulator-name = "lcd_vdd"; ti,overcurrent-wait = <3>; }; @@ -226,26 +240,6 @@ }; }; - mmc@12200000 { - status = "okay"; - }; - - mmc@12220000 { - status = "okay"; - }; - - /* - * On Snow we've got SIP WiFi and so can keep drive strengths low to - * reduce EMI. - */ - mmc@12230000 { - status = "okay"; - slot@0 { - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; - }; - }; - i2c@12CD0000 { max98095: codec@11 { compatible = "maxim,max98095"; @@ -253,6 +247,15 @@ pinctrl-0 = <&max98095_en>; pinctrl-names = "default"; }; + + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + panel = <&panel>; + }; }; i2s0: i2s@03830000 { @@ -294,17 +297,24 @@ }; hdmi { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; hdmi-en-supply = <&tps65090_fet7>; vdd-supply = <&ldo8_reg>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -314,6 +324,12 @@ samsung,invert-vclk; }; + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + }; + dp-controller@145B0000 { status = "okay"; pinctrl-names = "default"; @@ -325,26 +341,15 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; + bridge = <&ptn3460>; }; }; &i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + max77686@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; @@ -491,6 +496,10 @@ }; &i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + trackpad { reg = <0x67>; compatible = "cypress,cyapa"; @@ -500,6 +509,106 @@ }; }; +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + wp-gpios = <&gpc2 1 0>; + cap-sd-highspeed; +}; + +/* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_3 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + &pinctrl_0 { max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; @@ -509,4 +618,10 @@ }; }; +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; +}; + #include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 492e1eff37bd..f21b9aa00fbb 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -603,21 +603,6 @@ }; }; - usb2_phy: usbphy@12130000 { - compatible = "samsung,exynos5250-usb2phy"; - reg = <0x12130000 0x100>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>; - clock-names = "ext_xtal", "usbhost"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbphy-sys { - reg = <0x10040704 0x8>, - <0x10050230 0x4>; - }; - }; - usb2_phy_gen: phy@12130000 { compatible = "samsung,exynos5250-usb2-phy"; reg = <0x12130000 0x100>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 8c84ab27c19b..a803b605051b 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -69,7 +69,7 @@ num-slots = <1>; broken-cd; bypass-smu; - supports-highspeed; + cap-mmc-highspeed; supports-hs200-mode; /* 200 Mhz */ card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; @@ -77,27 +77,19 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 7275bbd6fc4b..be3e02530b42 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -40,33 +40,25 @@ &mmc_0 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 434fd9d3e09d..70a559cf1a3d 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -50,7 +50,6 @@ mmc@12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; @@ -58,16 +57,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; vmmc-supply = <&ldo10_reg>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -75,11 +70,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; vmmc-supply = <&ldo10_reg>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; hsi2c_4: i2c@12CA0000 { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 228a6b1e0aa1..9a233828539c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -11,6 +11,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos5420.dtsi" / { @@ -30,11 +31,12 @@ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + power-supply = <&tps65090_fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -100,6 +102,17 @@ regulator-boot-on; regulator-always-on; }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + }; +}; + +&adc { + status = "okay"; + vdd-supply = <&ldo9_reg>; }; &dp { @@ -113,22 +126,7 @@ samsung,link-rate = <0x06>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; + bridge = <&ps8625>; }; &fimd { @@ -142,10 +140,348 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; + + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "ldo_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; }; &hsi2c_7 { status = "okay"; + clock-frequency = <400000>; max98090: codec@10 { compatible = "maxim,max98090"; @@ -155,6 +491,44 @@ pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; }; + + light-sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + vcc-supply = <&tps65090_fet5>; + }; + + ps8625: lvds-bridge@48 { + compatible = "parade,ps8625"; + reg = <0x48>; + sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; + lane-count = <2>; + panel = <&panel>; + use-external-pwm; + }; +}; + +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + + /* Atmel mXT336S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO0 */ + KEY_RESERVED /* GPIO1 */ + KEY_RESERVED /* GPIO2 */ + BTN_LEFT>; /* GPIO3 */ + }; }; &hsi2c_9 { @@ -187,7 +561,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>; @@ -196,17 +570,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>; @@ -214,11 +584,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; @@ -249,6 +615,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; @@ -277,12 +650,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -312,6 +715,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { @@ -365,12 +776,12 @@ vsys2-supply = <&vbat>; vsys3-supply = <&vbat>; infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; + infet2-supply = <&tps65090_dcdc1>; + infet3-supply = <&tps65090_dcdc2>; + infet4-supply = <&tps65090_dcdc2>; + infet5-supply = <&tps65090_dcdc2>; + infet6-supply = <&tps65090_dcdc2>; + infet7-supply = <&tps65090_dcdc1>; vsys-l1-supply = <&vbat>; vsys-l2-supply = <&vbat>; @@ -445,3 +856,4 @@ }; #include "cros-ec-keyboard.dtsi" +#include "cros-adc-thermistors.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 6052aa9c5659..8be3d7b489ff 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -76,34 +76,26 @@ mmc@12200000 { status = "okay"; broken-cd; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; }; mmc@12220000 { status = "okay"; - supports-highspeed; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-sd-highspeed; }; dp-controller@145B0000 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index f3ee48bbe05f..1d31c8132558 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -11,6 +11,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos5800.dtsi" / { @@ -28,11 +29,13 @@ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 1000000 0>; brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; default-brightness-level = <7>; + enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + power-supply = <&tps65090_fet1>; pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; }; @@ -98,6 +101,17 @@ regulator-boot-on; regulator-always-on; }; + + panel: panel { + compatible = "auo,b133htn01"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + }; +}; + +&adc { + status = "okay"; + vdd-supply = <&ldo9_reg>; }; &dp { @@ -111,22 +125,7 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <150660000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <60>; - hback-porch = <172>; - hsync-len = <80>; - vback-porch = <25>; - vfront-porch = <10>; - vsync-len = <10>; - }; - }; + panel = <&panel>; }; &fimd { @@ -140,10 +139,348 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; + + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&hsi2c_4 { + status = "okay"; + clock-frequency = <400000>; + + max77802-pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2v"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vdd_1v2_2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_1v8_3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vqmmc_sdcard: ldo4_reg: LDO4 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_1v8_5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_1v8_6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_1v8_7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo_19"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "ldo_20"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "ldo_21"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "ldo_23"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ldo24_reg: LDO24 { + regulator-name = "ldo_24"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "ldo_25"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "ldo_26"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo_27"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo_28"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo_29"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "ldo_32"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo_33"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo_34"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; }; &hsi2c_7 { status = "okay"; + clock-frequency = <400000>; max98091: codec@10 { compatible = "maxim,max98091"; @@ -153,6 +490,33 @@ pinctrl-names = "default"; pinctrl-0 = <&max98091_irq>; }; + + light-sensor@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + vcc-supply = <&tps65090_fet5>; + }; +}; + +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + /* Atmel mXT540S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO 0 */ + KEY_RESERVED /* GPIO 1 */ + BTN_LEFT /* GPIO 2 */ + KEY_RESERVED>; /* GPIO 3 */ + }; }; &hsi2c_9 { @@ -185,7 +549,7 @@ num-slots = <1>; broken-cd; caps2-mmc-hs200-1_8v; - supports-highspeed; + cap-mmc-highspeed; non-removable; card-detect-delay = <200>; clock-frequency = <400000000>; @@ -194,17 +558,13 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; }; &mmc_2 { status = "okay"; num-slots = <1>; - supports-highspeed; + cap-sd-highspeed; card-detect-delay = <200>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <3>; @@ -212,11 +572,7 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; }; @@ -247,6 +603,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; @@ -275,12 +638,42 @@ samsung,pin-drv = <0>; }; + max77802_irq: max77802-irq { + samsung,pins = "gpx3-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + hdmi_hpd_irq: hdmi-hpd-irq { samsung,pins = "gpx3-7"; samsung,pin-function = <0>; samsung,pin-pud = <1>; samsung,pin-drv = <0>; }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpy7-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpj4-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpj4-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &pinctrl_3 { @@ -310,6 +703,14 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + pmic_selb: pmic-selb { + samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", + "gph0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; &rtc { @@ -363,12 +764,12 @@ vsys2-supply = <&vbat>; vsys3-supply = <&vbat>; infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; + infet2-supply = <&tps65090_dcdc1>; + infet3-supply = <&tps65090_dcdc2>; + infet4-supply = <&tps65090_dcdc2>; + infet5-supply = <&tps65090_dcdc2>; + infet6-supply = <&tps65090_dcdc2>; + infet7-supply = <&tps65090_dcdc1>; vsys-l1-supply = <&vbat>; vsys-l2-supply = <&vbat>; @@ -443,3 +844,4 @@ }; #include "cros-ec-keyboard.dtsi" +#include "cros-adc-thermistors.dtsi" diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts new file mode 100644 index 000000000000..af4eee5794aa --- /dev/null +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Freescale MX1 ADS"; + compatible = "fsl,imx1ads", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + clk32 { + compatible = "fsl,imx-clk32", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; +}; + +&cspi1 { + pinctrl-0 = <&pinctrl_cspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; + + extgpio0: pcf8575@22 { + compatible = "nxp,pcf8575"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + extgpio1: pcf8575@24 { + compatible = "nxp,pcf8575"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <4>; + fsl,weim-cs-timing = <0x00003e00 0x00000801>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&iomuxc { + imx1-ads { + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX1_PAD_SPI1_MISO__SPI1_MISO 0x0 + MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0 + MX1_PAD_SPI1_RDY__SPI1_RDY 0x0 + MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0 + MX1_PAD_SPI1_SS__GPIO3_15 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts new file mode 100644 index 000000000000..07d92fb40e6f --- /dev/null +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx1.dtsi" + +/ { + model = "Armadeus APF9328"; + compatible = "armadeus,imx1-apf9328", "fsl,imx1"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x08000000 0x00800000>; + }; +}; + +&i2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + nor: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00330e04 0x00000d01>; + #address-cells = <1>; + #size-cells = <1>; + }; + + eth: eth@4,c00000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth>; + compatible = "davicom,dm9000"; + reg = < + 4 0x00c00000 0x2 + 4 0x00c00002 0x2 + >; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + fsl,weim-cs-timing = <0x0000c700 0x19190d01>; + }; +}; + +&iomuxc { + imx1-apf9328 { + pinctrl_eth: ethgrp { + fsl,pins = < + MX1_PAD_SIM_SVEN__GPIO2_14 0x0 + >; + }; + + pinctrl_i2c: i2cgrp { + fsl,pins = < + MX1_PAD_I2C_SCL__I2C_SCL 0x0 + MX1_PAD_I2C_SDA__I2C_SDA 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX1_PAD_UART1_TXD__UART1_TXD 0x0 + MX1_PAD_UART1_RXD__UART1_RXD 0x0 + MX1_PAD_UART1_CTS__UART1_CTS 0x0 + MX1_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX1_PAD_UART2_TXD__UART2_TXD 0x0 + MX1_PAD_UART2_RXD__UART2_RXD 0x0 + MX1_PAD_UART2_CTS__UART2_CTS 0x0 + MX1_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX1_PAD_A0__A0 0x0 + MX1_PAD_A16__A16 0x0 + MX1_PAD_A17__A17 0x0 + MX1_PAD_A18__A18 0x0 + MX1_PAD_A19__A19 0x0 + MX1_PAD_A20__A20 0x0 + MX1_PAD_A21__A21 0x0 + MX1_PAD_A22__A22 0x0 + MX1_PAD_A23__A23 0x0 + MX1_PAD_A24__A24 0x0 + MX1_PAD_BCLK__BCLK 0x0 + MX1_PAD_CS4__CS4 0x0 + MX1_PAD_DTACK__DTACK 0x0 + MX1_PAD_ECB__ECB 0x0 + MX1_PAD_LBA__LBA 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h new file mode 100644 index 000000000000..22bec8b87680 --- /dev/null +++ b/arch/arm/boot/dts/imx1-pinfunc.h @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __DTS_IMX1_PINFUNC_H +#define __DTS_IMX1_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <pin mux_id> + * mux_id consists of + * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10) + * + * function: 0 - Primary function + * 1 - Alternate function + * 2 - GPIO + * direction: 0 - Input + * 1 - Output + * gpio_oconf: 0 - A_IN + * 1 - B_IN + * 2 - A_OUT + * 3 - Data Register + * gpio_iconfa/b: 0 - GPIO_IN + * 1 - Interrupt Status Register + * 2 - 0 + * 3 - 1 + * + * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable + * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin + * number on the specific port (between 0 and 31). + */ + +#define MX1_PAD_A24__A24 0x00 0x004 +#define MX1_PAD_A24__GPIO1_0 0x00 0x032 +#define MX1_PAD_A24__SPI2_CLK 0x00 0x006 +#define MX1_PAD_TIN__TIN 0x01 0x000 +#define MX1_PAD_TIN__GPIO1_1 0x01 0x032 +#define MX1_PAD_TIN__SPI2_RXD 0x01 0x022 +#define MX1_PAD_PWMO__PWMO 0x02 0x004 +#define MX1_PAD_PWMO__GPIO1_2 0x02 0x032 +#define MX1_PAD_CSI_MCLK__CSI_MCLK 0x03 0x004 +#define MX1_PAD_CSI_MCLK__GPIO1_3 0x03 0x032 +#define MX1_PAD_CSI_D0__CSI_D0 0x04 0x000 +#define MX1_PAD_CSI_D0__GPIO1_4 0x04 0x032 +#define MX1_PAD_CSI_D1__CSI_D1 0x05 0x000 +#define MX1_PAD_CSI_D1__GPIO1_5 0x05 0x032 +#define MX1_PAD_CSI_D2__CSI_D2 0x06 0x000 +#define MX1_PAD_CSI_D2__GPIO1_6 0x06 0x032 +#define MX1_PAD_CSI_D3__CSI_D3 0x07 0x000 +#define MX1_PAD_CSI_D3__GPIO1_7 0x07 0x032 +#define MX1_PAD_CSI_D4__CSI_D4 0x08 0x000 +#define MX1_PAD_CSI_D4__GPIO1_8 0x08 0x032 +#define MX1_PAD_CSI_D5__CSI_D5 0x09 0x000 +#define MX1_PAD_CSI_D5__GPIO1_9 0x09 0x032 +#define MX1_PAD_CSI_D6__CSI_D6 0x0a 0x000 +#define MX1_PAD_CSI_D6__GPIO1_10 0x0a 0x032 +#define MX1_PAD_CSI_D7__CSI_D7 0x0b 0x000 +#define MX1_PAD_CSI_D7__GPIO1_11 0x0b 0x032 +#define MX1_PAD_CSI_VSYNC__CSI_VSYNC 0x0c 0x000 +#define MX1_PAD_CSI_VSYNC__GPIO1_12 0x0c 0x032 +#define MX1_PAD_CSI_HSYNC__CSI_HSYNC 0x0d 0x000 +#define MX1_PAD_CSI_HSYNC__GPIO1_13 0x0d 0x032 +#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK 0x0e 0x000 +#define MX1_PAD_CSI_PIXCLK__GPIO1_14 0x0e 0x032 +#define MX1_PAD_I2C_SDA__I2C_SDA 0x0f 0x000 +#define MX1_PAD_I2C_SDA__GPIO1_15 0x0f 0x032 +#define MX1_PAD_I2C_SCL__I2C_SCL 0x10 0x004 +#define MX1_PAD_I2C_SCL__GPIO1_16 0x10 0x032 +#define MX1_PAD_DTACK__DTACK 0x11 0x000 +#define MX1_PAD_DTACK__GPIO1_17 0x11 0x032 +#define MX1_PAD_DTACK__SPI2_SS 0x11 0x002 +#define MX1_PAD_DTACK__A25 0x11 0x016 +#define MX1_PAD_BCLK__BCLK 0x12 0x004 +#define MX1_PAD_BCLK__GPIO1_18 0x12 0x032 +#define MX1_PAD_LBA__LBA 0x13 0x004 +#define MX1_PAD_LBA__GPIO1_19 0x13 0x032 +#define MX1_PAD_ECB__ECB 0x14 0x000 +#define MX1_PAD_ECB__GPIO1_20 0x14 0x032 +#define MX1_PAD_A0__A0 0x15 0x004 +#define MX1_PAD_A0__GPIO1_21 0x15 0x032 +#define MX1_PAD_CS4__CS4 0x16 0x004 +#define MX1_PAD_CS4__GPIO1_22 0x16 0x032 +#define MX1_PAD_CS5__CS5 0x17 0x004 +#define MX1_PAD_CS5__GPIO1_23 0x17 0x032 +#define MX1_PAD_A16__A16 0x18 0x004 +#define MX1_PAD_A16__GPIO1_24 0x18 0x032 +#define MX1_PAD_A17__A17 0x19 0x004 +#define MX1_PAD_A17__GPIO1_25 0x19 0x032 +#define MX1_PAD_A18__A18 0x1a 0x004 +#define MX1_PAD_A18__GPIO1_26 0x1a 0x032 +#define MX1_PAD_A19__A19 0x1b 0x004 +#define MX1_PAD_A19__GPIO1_27 0x1b 0x032 +#define MX1_PAD_A20__A20 0x1c 0x004 +#define MX1_PAD_A20__GPIO1_28 0x1c 0x032 +#define MX1_PAD_A21__A21 0x1d 0x004 +#define MX1_PAD_A21__GPIO1_29 0x1d 0x032 +#define MX1_PAD_A22__A22 0x1e 0x004 +#define MX1_PAD_A22__GPIO1_30 0x1e 0x032 +#define MX1_PAD_A23__A23 0x1f 0x004 +#define MX1_PAD_A23__GPIO1_31 0x1f 0x032 +#define MX1_PAD_SD_DAT0__SD_DAT0 0x28 0x000 +#define MX1_PAD_SD_DAT0__MS_PI0 0x28 0x001 +#define MX1_PAD_SD_DAT0__GPIO2_8 0x28 0x032 +#define MX1_PAD_SD_DAT1__SD_DAT1 0x29 0x000 +#define MX1_PAD_SD_DAT1__MS_PI1 0x29 0x001 +#define MX1_PAD_SD_DAT1__GPIO2_9 0x29 0x032 +#define MX1_PAD_SD_DAT2__SD_DAT2 0x2a 0x000 +#define MX1_PAD_SD_DAT2__MS_SCLKI 0x2a 0x001 +#define MX1_PAD_SD_DAT2__GPIO2_10 0x2a 0x032 +#define MX1_PAD_SD_DAT3__SD_DAT3 0x2b 0x000 +#define MX1_PAD_SD_DAT3__MS_SDIO 0x2b 0x001 +#define MX1_PAD_SD_DAT3__GPIO2_11 0x2b 0x032 +#define MX1_PAD_SD_SCLK__SD_SCLK 0x2c 0x004 +#define MX1_PAD_SD_SCLK__MS_SCLKO 0x2c 0x005 +#define MX1_PAD_SD_SCLK__GPIO2_12 0x2c 0x032 +#define MX1_PAD_SD_CMD__SD_CMD 0x2d 0x000 +#define MX1_PAD_SD_CMD__MS_BS 0x2d 0x005 +#define MX1_PAD_SD_CMD__GPIO2_13 0x2d 0x032 +#define MX1_PAD_SIM_SVEN__SIM_SVEN 0x2e 0x004 +#define MX1_PAD_SIM_SVEN__SSI_RXFS 0x2e 0x001 +#define MX1_PAD_SIM_SVEN__GPIO2_14 0x2e 0x032 +#define MX1_PAD_SIM_PD__SIM_PD 0x2f 0x000 +#define MX1_PAD_SIM_PD__SSI_RXCLK 0x2f 0x001 +#define MX1_PAD_SIM_PD__GPIO2_15 0x2f 0x032 +#define MX1_PAD_SIM_TX__SIM_TX 0x30 0x000 +#define MX1_PAD_SIM_TX__SSI_RXDAT 0x30 0x001 +#define MX1_PAD_SIM_TX__GPIO2_16 0x30 0x032 +#define MX1_PAD_SIM_RX__SIM_RX 0x31 0x000 +#define MX1_PAD_SIM_RX__SSI_TXDAT 0x31 0x005 +#define MX1_PAD_SIM_RX__GPIO2_17 0x31 0x032 +#define MX1_PAD_SIM_RST__SIM_RST 0x32 0x004 +#define MX1_PAD_SIM_RST__SSI_TXFS 0x32 0x001 +#define MX1_PAD_SIM_RST__GPIO2_18 0x32 0x032 +#define MX1_PAD_SIM_CLK__SIM_CLK 0x33 0x004 +#define MX1_PAD_SIM_CLK__SSI_TXCLK 0x33 0x001 +#define MX1_PAD_SIM_CLK__GPIO2_19 0x33 0x032 +#define MX1_PAD_USBD_AFE__USBD_AFE 0x34 0x004 +#define MX1_PAD_USBD_AFE__GPIO2_20 0x34 0x032 +#define MX1_PAD_USBD_OE__USBD_OE 0x35 0x004 +#define MX1_PAD_USBD_OE__GPIO2_21 0x35 0x032 +#define MX1_PAD_USBD_RCV__USBD_RCV 0x36 0x000 +#define MX1_PAD_USBD_RCV__GPIO2_22 0x36 0x032 +#define MX1_PAD_USBD_SUSPND__USBD_SUSPND 0x37 0x004 +#define MX1_PAD_USBD_SUSPND__GPIO2_23 0x37 0x032 +#define MX1_PAD_USBD_VP__USBD_VP 0x38 0x000 +#define MX1_PAD_USBD_VP__GPIO2_24 0x38 0x032 +#define MX1_PAD_USBD_VM__USBD_VM 0x39 0x000 +#define MX1_PAD_USBD_VM__GPIO2_25 0x39 0x032 +#define MX1_PAD_USBD_VPO__USBD_VPO 0x3a 0x004 +#define MX1_PAD_USBD_VPO__GPIO2_26 0x3a 0x032 +#define MX1_PAD_USBD_VMO__USBD_VMO 0x3b 0x004 +#define MX1_PAD_USBD_VMO__GPIO2_27 0x3b 0x032 +#define MX1_PAD_UART2_CTS__UART2_CTS 0x3c 0x004 +#define MX1_PAD_UART2_CTS__GPIO2_28 0x3c 0x032 +#define MX1_PAD_UART2_RTS__UART2_RTS 0x3d 0x000 +#define MX1_PAD_UART2_RTS__GPIO2_29 0x3d 0x032 +#define MX1_PAD_UART2_TXD__UART2_TXD 0x3e 0x004 +#define MX1_PAD_UART2_TXD__GPIO2_30 0x3e 0x032 +#define MX1_PAD_UART2_RXD__UART2_RXD 0x3f 0x000 +#define MX1_PAD_UART2_RXD__GPIO2_31 0x3f 0x032 +#define MX1_PAD_SSI_RXFS__SSI_RXFS 0x43 0x000 +#define MX1_PAD_SSI_RXFS__GPIO3_3 0x43 0x032 +#define MX1_PAD_SSI_RXCLK__SSI_RXCLK 0x44 0x000 +#define MX1_PAD_SSI_RXCLK__GPIO3_4 0x44 0x032 +#define MX1_PAD_SSI_RXDAT__SSI_RXDAT 0x45 0x000 +#define MX1_PAD_SSI_RXDAT__GPIO3_5 0x45 0x032 +#define MX1_PAD_SSI_TXDAT__SSI_TXDAT 0x46 0x004 +#define MX1_PAD_SSI_TXDAT__GPIO3_6 0x46 0x032 +#define MX1_PAD_SSI_TXFS__SSI_TXFS 0x47 0x000 +#define MX1_PAD_SSI_TXFS__GPIO3_7 0x47 0x032 +#define MX1_PAD_SSI_TXCLK__SSI_TXCLK 0x48 0x000 +#define MX1_PAD_SSI_TXCLK__GPIO3_8 0x48 0x032 +#define MX1_PAD_UART1_CTS__UART1_CTS 0x49 0x004 +#define MX1_PAD_UART1_CTS__GPIO3_9 0x49 0x032 +#define MX1_PAD_UART1_RTS__UART1_RTS 0x4a 0x000 +#define MX1_PAD_UART1_RTS__GPIO3_10 0x4a 0x032 +#define MX1_PAD_UART1_TXD__UART1_TXD 0x4b 0x004 +#define MX1_PAD_UART1_TXD__GPIO3_11 0x4b 0x032 +#define MX1_PAD_UART1_RXD__UART1_RXD 0x4c 0x000 +#define MX1_PAD_UART1_RXD__GPIO3_12 0x4c 0x032 +#define MX1_PAD_SPI1_RDY__SPI1_RDY 0x4d 0x000 +#define MX1_PAD_SPI1_RDY__GPIO3_13 0x4d 0x032 +#define MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x4e 0x004 +#define MX1_PAD_SPI1_SCLK__GPIO3_14 0x4e 0x032 +#define MX1_PAD_SPI1_SS__SPI1_SS 0x4f 0x000 +#define MX1_PAD_SPI1_SS__GPIO3_15 0x4f 0x032 +#define MX1_PAD_SPI1_MISO__SPI1_MISO 0x50 0x000 +#define MX1_PAD_SPI1_MISO__GPIO3_16 0x50 0x032 +#define MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x51 0x004 +#define MX1_PAD_SPI1_MOSI__GPIO3_17 0x51 0x032 +#define MX1_PAD_BT13__BT13 0x53 0x004 +#define MX1_PAD_BT13__SSI2_RXCLK 0x53 0x001 +#define MX1_PAD_BT13__GPIO3_19 0x53 0x032 +#define MX1_PAD_BT12__BT12 0x54 0x004 +#define MX1_PAD_BT12__SSI2_TXFS 0x54 0x001 +#define MX1_PAD_BT12__GPIO3_20 0x54 0x032 +#define MX1_PAD_BT11__BT11 0x55 0x004 +#define MX1_PAD_BT11__SSI2_TXCLK 0x55 0x001 +#define MX1_PAD_BT11__GPIO3_21 0x55 0x032 +#define MX1_PAD_BT10__BT10 0x56 0x004 +#define MX1_PAD_BT10__SSI2_TX 0x56 0x001 +#define MX1_PAD_BT10__GPIO3_22 0x56 0x032 +#define MX1_PAD_BT9__BT9 0x57 0x004 +#define MX1_PAD_BT9__SSI2_RX 0x57 0x001 +#define MX1_PAD_BT9__GPIO3_23 0x57 0x032 +#define MX1_PAD_BT8__BT8 0x58 0x004 +#define MX1_PAD_BT8__SSI2_RXFS 0x58 0x001 +#define MX1_PAD_BT8__GPIO3_24 0x58 0x032 +#define MX1_PAD_BT8__UART3_RI 0x58 0x016 +#define MX1_PAD_BT7__BT7 0x59 0x004 +#define MX1_PAD_BT7__GPIO3_25 0x59 0x032 +#define MX1_PAD_BT7__UART3_DSR 0x59 0x016 +#define MX1_PAD_BT6__BT6 0x5a 0x004 +#define MX1_PAD_BT6__GPIO3_26 0x5a 0x032 +#define MX1_PAD_BT6__SPI2_SS3 0x5a 0x016 +#define MX1_PAD_BT6__UART3_DTR 0x5a 0x022 +#define MX1_PAD_BT5__BT5 0x5b 0x000 +#define MX1_PAD_BT5__GPIO3_27 0x5b 0x032 +#define MX1_PAD_BT5__UART3_DCD 0x5b 0x016 +#define MX1_PAD_BT4__BT4 0x5c 0x000 +#define MX1_PAD_BT4__GPIO3_28 0x5c 0x032 +#define MX1_PAD_BT4__UART3_CTS 0x5c 0x016 +#define MX1_PAD_BT3__BT3 0x5d 0x000 +#define MX1_PAD_BT3__GPIO3_29 0x5d 0x032 +#define MX1_PAD_BT3__UART3_RTS 0x5d 0x022 +#define MX1_PAD_BT2__BT2 0x5e 0x004 +#define MX1_PAD_BT2__GPIO3_30 0x5e 0x032 +#define MX1_PAD_BT2__UART3_TX 0x5e 0x016 +#define MX1_PAD_BT1__BT1 0x5f 0x000 +#define MX1_PAD_BT1__GPIO3_31 0x5f 0x032 +#define MX1_PAD_BT1__UART3_RX 0x5f 0x022 +#define MX1_PAD_LSCLK__LSCLK 0x66 0x004 +#define MX1_PAD_LSCLK__GPIO4_6 0x66 0x032 +#define MX1_PAD_REV__REV 0x67 0x004 +#define MX1_PAD_REV__UART2_DTR 0x67 0x001 +#define MX1_PAD_REV__GPIO4_7 0x67 0x032 +#define MX1_PAD_REV__SPI2_CLK 0x67 0x006 +#define MX1_PAD_CLS__CLS 0x68 0x004 +#define MX1_PAD_CLS__UART2_DCD 0x68 0x005 +#define MX1_PAD_CLS__GPIO4_8 0x68 0x032 +#define MX1_PAD_CLS__SPI2_SS 0x68 0x002 +#define MX1_PAD_PS__PS 0x69 0x004 +#define MX1_PAD_PS__UART2_RI 0x69 0x005 +#define MX1_PAD_PS__GPIO4_9 0x69 0x032 +#define MX1_PAD_PS__SPI2_RXD 0x69 0x022 +#define MX1_PAD_SPL_SPR__SPL_SPR 0x6a 0x004 +#define MX1_PAD_SPL_SPR__UART2_DSR 0x6a 0x005 +#define MX1_PAD_SPL_SPR__GPIO4_10 0x6a 0x032 +#define MX1_PAD_SPL_SPR__SPI2_TXD 0x6a 0x006 +#define MX1_PAD_CONTRAST__CONTRAST 0x6b 0x004 +#define MX1_PAD_CONTRAST__GPIO4_11 0x6b 0x032 +#define MX1_PAD_CONTRAST__SPI2_SS2 0x6b 0x012 +#define MX1_PAD_ACD_OE__ACD_OE 0x6c 0x004 +#define MX1_PAD_ACD_OE__GPIO4_12 0x6c 0x032 +#define MX1_PAD_LP_HSYNC__LP_HSYNC 0x6d 0x004 +#define MX1_PAD_LP_HSYNC__GPIO4_13 0x6d 0x032 +#define MX1_PAD_FLM_VSYNC__FLM_VSYNC 0x6e 0x004 +#define MX1_PAD_FLM_VSYNC__GPIO4_14 0x6e 0x032 +#define MX1_PAD_LD0__LD0 0x6f 0x004 +#define MX1_PAD_LD0__GPIO4_15 0x6f 0x032 +#define MX1_PAD_LD1__LD1 0x70 0x004 +#define MX1_PAD_LD1__GPIO4_16 0x70 0x032 +#define MX1_PAD_LD2__LD2 0x71 0x004 +#define MX1_PAD_LD2__GPIO4_17 0x71 0x032 +#define MX1_PAD_LD3__LD3 0x72 0x004 +#define MX1_PAD_LD3__GPIO4_18 0x72 0x032 +#define MX1_PAD_LD4__LD4 0x73 0x004 +#define MX1_PAD_LD4__GPIO4_19 0x73 0x032 +#define MX1_PAD_LD5__LD5 0x74 0x004 +#define MX1_PAD_LD5__GPIO4_20 0x74 0x032 +#define MX1_PAD_LD6__LD6 0x75 0x004 +#define MX1_PAD_LD6__GPIO4_21 0x75 0x032 +#define MX1_PAD_LD7__LD7 0x76 0x004 +#define MX1_PAD_LD7__GPIO4_22 0x76 0x032 +#define MX1_PAD_LD8__LD8 0x77 0x004 +#define MX1_PAD_LD8__GPIO4_23 0x77 0x032 +#define MX1_PAD_LD9__LD9 0x78 0x004 +#define MX1_PAD_LD9__GPIO4_24 0x78 0x032 +#define MX1_PAD_LD10__LD10 0x79 0x004 +#define MX1_PAD_LD10__GPIO4_25 0x79 0x032 +#define MX1_PAD_LD11__LD11 0x7a 0x004 +#define MX1_PAD_LD11__GPIO4_26 0x7a 0x032 +#define MX1_PAD_LD12__LD12 0x7b 0x004 +#define MX1_PAD_LD12__GPIO4_27 0x7b 0x032 +#define MX1_PAD_LD13__LD13 0x7c 0x004 +#define MX1_PAD_LD13__GPIO4_28 0x7c 0x032 +#define MX1_PAD_LD14__LD14 0x7d 0x004 +#define MX1_PAD_LD14__GPIO4_29 0x7d 0x032 +#define MX1_PAD_LD15__LD15 0x7e 0x004 +#define MX1_PAD_LD15__GPIO4_30 0x7e 0x032 +#define MX1_PAD_TMR2OUT__TMR2OUT 0x7f 0x000 +#define MX1_PAD_TMR2OUT__GPIO4_31 0x7f 0x032 +#define MX1_PAD_TMR2OUT__SPI2_TXD 0x7f 0x006 + +#endif diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi new file mode 100644 index 000000000000..22f5d1db5b31 --- /dev/null +++ b/arch/arm/boot/dts/imx1.dtsi @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "skeleton.dtsi" +#include "imx1-pinfunc.h" + +#include <dt-bindings/clock/imx1-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &i2c; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &cspi1; + spi1 = &cspi2; + }; + + aitc: aitc-interrupt-controller@00223000 { + compatible = "fsl,imx1-aitc", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x00223000 0x1000>; + }; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,arm920t"; + operating-points = <200000 1900000>; + clock-latency = <62500>; + clocks = <&clks IMX1_CLK_MCU>; + voltage-tolerance = <5>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&aitc>; + ranges; + + aipi@00200000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00200000 0x10000>; + ranges; + + gpt1: timer@00202000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00202000 0x1000>; + interrupts = <59>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@00203000 { + compatible = "fsl,imx1-gpt"; + reg = <0x00203000 0x1000>; + interrupts = <58>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + fb: fb@00205000 { + compatible = "fsl,imx1-fb"; + reg = <0x00205000 0x1000>; + interrupts = <14>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER2>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + uart1: serial@00206000 { + compatible = "fsl,imx1-uart"; + reg = <0x00206000 0x1000>; + interrupts = <30 29 26>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@00207000 { + compatible = "fsl,imx1-uart"; + reg = <0x00207000 0x1000>; + interrupts = <24 23 20>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + pwm: pwm@00208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; + + dma: dma@00209000 { + compatible = "fsl,imx1-dma"; + reg = <0x00209000 0x1000>; + interrupts = <61 60>; + clocks = <&clks IMX1_CLK_HCLK>, + <&clks IMX1_CLK_DMA_GATE>; + clock-names = "ipg", "ahb"; + #dma-cells = <1>; + }; + + uart3: serial@0020a000 { + compatible = "fsl,imx1-uart"; + reg = <0x0020a000 0x1000>; + interrupts = <54 4 1>; + clocks = <&clks IMX1_CLK_UART3_GATE>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + aipi@00210000 { + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00210000 0x10000>; + ranges; + + cspi1: cspi@00213000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00213000 0x1000>; + interrupts = <41>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c: i2c@00217000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-i2c"; + reg = <0x00217000 0x1000>; + interrupts = <39>; + clocks = <&clks IMX1_CLK_HCLK>; + status = "disabled"; + }; + + cspi2: cspi@00219000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx1-cspi"; + reg = <0x00219000 0x1000>; + interrupts = <40>; + clocks = <&clks IMX1_CLK_DUMMY>, + <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + clks: ccm@0021b000 { + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + #clock-cells = <1>; + }; + + iomuxc: iomuxc@0021c000 { + compatible = "fsl,imx1-iomuxc"; + reg = <0x0021c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@0021c000 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c000 0x100>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@0021c100 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c100 0x100>; + interrupts = <12>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@0021c200 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c200 0x100>; + interrupts = <13>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@0021c300 { + compatible = "fsl,imx1-gpio"; + reg = <0x0021c300 0x100>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + + weim: weim@00220000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx1-weim"; + reg = <0x00220000 0x1000>; + clocks = <&clks IMX1_CLK_DUMMY>; + ranges = < + 0 0 0x10000000 0x02000000 + 1 0 0x12000000 0x01000000 + 2 0 0x13000000 0x01000000 + 3 0 0x14000000 0x01000000 + 4 0 0x15000000 0x01000000 + 5 0 0x16000000 0x01000000 + >; + status = "disabled"; + }; + + esram: esram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index a33f66c11b73..57e29977ba06 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -60,10 +60,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 9238a95d8e62..88eebb15da6a 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -247,6 +247,7 @@ #define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 #define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 +#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000 #define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 #define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 @@ -260,6 +261,7 @@ #define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 #define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000 #define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 #define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 @@ -269,31 +271,46 @@ #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000 #define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001 #define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 +#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 +#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x12 0x001 #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001 #define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 +#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 #define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001 #define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 +#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001 +#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001 +#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001 +#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001 +#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 #define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 @@ -303,18 +320,24 @@ #define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 #define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x12 0x000 #define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x11 0x001 +#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000 #define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 +#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000 #define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 #define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 @@ -328,6 +351,7 @@ #define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000 #define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001 +#define MX25_PAD_UART1_RTS__CC3 0x178 0x370 0x000 0x12 0x000 #define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000 #define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000 @@ -342,6 +366,7 @@ #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002 +#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000 #define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002 @@ -349,14 +374,17 @@ #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 +#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x11 0x001 #define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 #define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 #define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 +#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x11 0x001 #define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 #define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 +#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x11 0x001 #define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 #define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 @@ -457,14 +485,15 @@ #define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 #define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 -#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 #define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 #define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 -#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 +#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 #define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 #define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 #define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 #define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index c1740396b2c9..58d3c3cf2923 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -239,6 +239,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <11>; @@ -274,6 +275,7 @@ }; ssi1: ssi@50034000 { + #sound-dai-cells = <0>; compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; reg = <0x50034000 0x4000>; interrupts = <12>; @@ -453,7 +455,7 @@ }; sdma: sdma@53fd4000 { - compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx25-sdma"; reg = <0x53fd4000 0x4000>; clocks = <&clks 112>, <&clks 68>; clock-names = "ipg", "ahb"; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 2b6d489dae69..da306c5dd678 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -67,6 +67,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>; status = "okay"; + + adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max1027>; + spi-max-frequency = <10000000>; + }; }; &cspi2 { @@ -189,6 +199,13 @@ >; }; + pinctrl_max1027: max1027 { + fsl,pins = < + MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */ + MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */ + >; + }; + pinctrl_pwm: pwmgrp { fsl,pins = < MX27_PAD_PWMO__PWMO 0x0 diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 221cac4fb2cd..1f38a052ad4b 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -83,10 +83,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <16>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index e1ce9179db63..1092b761d7ac 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -94,10 +94,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 7d51459de5e8..ef944b6d4f01 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -177,10 +177,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049 &lcdif_pins_cfa10049_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index c3900e7ba331..6a34114bec29 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -92,10 +92,10 @@ pinctrl-0 = <&lcdif_18bit_pins_cfa10055 &lcdif_pins_cfa10055 &lcdif_pins_cfa10055_pullup>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index cef959a97219..ba6495ca44d2 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -64,10 +64,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10056 &lcdif_pins_cfa10056_pullup >; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index c4e00ce4b6da..5df0b24eaf59 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -78,10 +78,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10057 &lcdif_pins_cfa10057>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 7c9cc783f0d1..f5c6dce34abe 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -51,10 +51,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10058>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e4cc44c98585..09664fcf5afb 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -124,10 +124,10 @@ pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; lcd-supply = <®_lcd_3v3>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 9348ce59dda4..2df63bee6f4e 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -115,10 +115,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index b3c09ae3b928..e35cc6ba3ca6 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -81,10 +81,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index e14bd86f3e99..a5b27c85a91c 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -21,12 +21,15 @@ aliases { can0 = &can0; can1 = &can1; - display = &display; + display = &display0; ds1339 = &ds1339; gpio5 = &gpio5; lcdif = &lcdif; lcdif_23bit_pins = &tx28_lcdif_23bit_pins; lcdif_24bit_pins = &lcdif_24bit_pins_a; + reg_can_xcvr = ®_can_xcvr; + spi_gpio = &spi_gpio; + spi_mxs = &ssp3; stk5led = &user_led; usbotg = &usb0; }; @@ -37,7 +40,7 @@ onewire { compatible = "w1-gpio"; - gpios = <&gpio2 7 0>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -52,7 +55,7 @@ regulator-name = "usb0_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio0 18 0>; + gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -62,7 +65,7 @@ regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 27 0>; + gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -90,7 +93,7 @@ regulator-name = "CAN XCVR"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 0 0>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&tx28_flexcan_xcvr_pins>; }; @@ -101,7 +104,7 @@ regulator-name = "LCD POWER"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 31 0>; + gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -111,7 +114,7 @@ regulator-name = "LCD RESET"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 30 0>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; startup-delay-us = <300000>; enable-active-high; regulator-always-on; @@ -143,7 +146,7 @@ user_led: user { label = "Heartbeat"; - gpios = <&gpio4 10 0>; + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; @@ -172,16 +175,16 @@ matrix_keypad: matrix-keypad@0 { compatible = "gpio-matrix-keypad"; col-gpios = < - &gpio5 0 0 - &gpio5 1 0 - &gpio5 2 0 - &gpio5 3 0 + &gpio5 0 GPIO_ACTIVE_HIGH + &gpio5 1 GPIO_ACTIVE_HIGH + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 3 GPIO_ACTIVE_HIGH >; row-gpios = < - &gpio5 4 0 - &gpio5 5 0 - &gpio5 6 0 - &gpio5 7 0 + &gpio5 4 GPIO_ACTIVE_HIGH + &gpio5 5 GPIO_ACTIVE_HIGH + &gpio5 6 GPIO_ACTIVE_HIGH + &gpio5 7 GPIO_ACTIVE_HIGH >; /* sample keymap */ linux,keymap = < @@ -203,6 +206,44 @@ col-scan-delay-us = <5000>; linux,no-autorepeat; }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&tx28_spi_gpio_pins>; + + gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>; + num-chipselects = <3>; + cs-gpios = < + &gpio2 27 GPIO_ACTIVE_LOW + &gpio3 8 GPIO_ACTIVE_LOW + &gpio3 9 GPIO_ACTIVE_LOW + >; + /* enable this and disable ssp3 below, if you need full duplex SPI transfer */ + status = "disabled"; + + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <57600000>; + }; + + spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <57600000>; + }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; + }; }; /* 2nd TX-Std UART - (A)UART1 */ @@ -284,8 +325,8 @@ pinctrl-0 = <&tx28_edt_ft5x06_pins>; interrupt-parent = <&gpio2>; interrupts = <5 0>; - reset-gpios = <&gpio2 6 1>; - wake-gpios = <&gpio4 9 0>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; }; touchscreen: tsc2007@48 { @@ -295,7 +336,7 @@ pinctrl-0 = <&tx28_tsc2007_pins>; interrupt-parent = <&gpio3>; interrupts = <20 0>; - pendown-gpio = <&gpio3 20 1>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = /bits/ 16 <660>; }; @@ -309,10 +350,10 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>; lcd-supply = <®_lcd>; - display = <&display>; + display = <&display0>; status = "okay"; - display: display@0 { + display0: display0 { bits-per-pixel = <32>; bus-width = <24>; display-timings { @@ -558,6 +599,20 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + tx28_spi_gpio_pins: spi-gpiogrp { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + MX28_PAD_SSP3_SCK__GPIO_2_24 + MX28_PAD_SSP3_MOSI__GPIO_2_25 + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SS0__GPIO_2_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + tx28_tsc2007_pins: tx28-tsc2007-pins { fsl,pinmux-ids = < MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ @@ -619,17 +674,23 @@ clock-frequency = <57600000>; status = "okay"; - spidev0: spi@0 { + spi@0 { compatible = "spidev"; reg = <0>; spi-max-frequency = <57600000>; }; - spidev1: spi@1 { + spi@1 { compatible = "spidev"; reg = <1>; spi-max-frequency = <57600000>; }; + + spi@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <57600000>; + }; }; &usb0 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a95cc5358ff4..47f68ac868d4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -489,6 +489,38 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc1_4bit_pins_a: mmc1-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__SSP1_D0 + MX28_PAD_GPMI_D01__SSP1_D1 + MX28_PAD_GPMI_D02__SSP1_D2 + MX28_PAD_GPMI_D03__SSP1_D3 + MX28_PAD_GPMI_RDY1__SSP1_CMD + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc1_cd_cfg: mmc1-cd-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc1_sck_cfg: mmc1-sck-cfg { + fsl,pinmux-ids = < + MX28_PAD_GPMI_WRN__SSP1_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_a: mmc2-4bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -553,6 +585,17 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; + i2c1_pins_b: i2c1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_AUART2_CTS__I2C1_SCL + MX28_PAD_AUART2_RTS__I2C1_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 442e216ca9d9..6932928f3b45 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -114,6 +114,7 @@ }; ssi1: ssi@43fa0000 { + #sound-dai-cells = <0>; compatible = "fsl,imx35-ssi", "fsl,imx21-ssi"; reg = <0x43fa0000 0x4000>; interrupts = <11>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index c0e0f60ab6b2..620b0f030591 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -145,6 +145,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -454,6 +455,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 17c05a6fa776..92660e1fe1fc 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -210,6 +210,7 @@ }; ssi2: ssi@70014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; @@ -499,6 +500,7 @@ }; ssi1: ssi@83fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; @@ -554,6 +556,7 @@ }; ssi3: ssi@83fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 5ec1590ff7bc..1d325576bcc0 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -265,7 +265,7 @@ }; pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; + compatible = "dlg,da9053", "dlg,da9052"; reg = <0x48>; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 6b675a02066f..f91725b2e8ab 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -221,6 +221,7 @@ }; ssi2: ssi@50014000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; @@ -669,6 +670,7 @@ }; ssi1: ssi@63fcc000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; @@ -696,6 +698,7 @@ }; ssi3: ssi@63fe8000 { + #sound-dai-cells = <0>; compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; @@ -752,5 +755,10 @@ reg = <0xf8000000 0x20000>; clocks = <&clks IMX5_CLK_OCRAM>; }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <77>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts new file mode 100644 index 000000000000..a4b700cef188 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw552x.dts @@ -0,0 +1,20 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X"; + compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 71598546087f..44a0e6736bb1 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -1,206 +1,13 @@ /* - * Copyright (C) 2013,2014 Russell King + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" +#include "imx6qdl-hummingboard.dtsi" / { - model = "SolidRun HummingBoard DL/Solo"; - compatible = "solidrun,hummingboard", "fsl,imx6dl"; - - chosen { - stdout-path = &uart1; - }; - - ir_recv: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio1 2 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>; - }; - - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usbh1_vbus: usb-h1-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 0 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbotg_vbus: usb-otg-vbus { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 22 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - }; - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "On-board SPDIF"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_hdmi>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c1>; - - /* - * Not fitted on Carrier-1 board... yet - status = "okay"; - - rtc: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; - */ -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c2>; - status = "okay"; -}; - -&iomuxc { - hummingboard { - pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { - fsl,pins = < - MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 - >; - }; - - pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - >; - }; - - pinctrl_hummingboard_hdmi: hummingboard-hdmi { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_hummingboard_i2c1: hummingboard-i2c1 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_i2c2: hummingboard-i2c2 { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; - - pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; - }; - - pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { - /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. - */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; - }; - - pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { - fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; - }; - - pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 - >; - }; - - pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; - }; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_spdif>; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <®_usbh1_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = < - &pinctrl_hummingboard_usdhc2_aux - &pinctrl_hummingboard_usdhc2 - >; - vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; - status = "okay"; + model = "SolidRun HummingBoard Solo/DualLite"; + compatible = "solidrun,hummingboard/dl", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 22e6f8e657d2..822ffb231c57 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -18,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; @@ -26,12 +26,10 @@ led0 = &led0; led1 = &led1; led2 = &led2; - sky2 = ð1; ssi0 = &ssi1; spi0 = &ecspi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -40,23 +38,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */ default-state = "off"; }; }; @@ -67,7 +67,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -109,7 +111,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -137,7 +139,7 @@ &ecspi1 { fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; @@ -153,7 +155,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -199,11 +201,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -314,16 +311,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -345,51 +332,73 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; +&ldb { + status = "okay"; +}; + +&pcie { + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { imx6q-gw5400-a { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; pinctrl_audmux: audmuxgrp { fsl,pins = < @@ -397,6 +406,7 @@ MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -405,6 +415,7 @@ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */ >; }; @@ -429,6 +440,14 @@ >; }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -450,6 +469,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -474,6 +506,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -489,59 +522,3 @@ }; }; }; - -&ldb { - status = "okay"; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts new file mode 100644 index 000000000000..f87a8fa6e04d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw552x.dts @@ -0,0 +1,24 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-gw552x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW552X"; + compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts new file mode 100644 index 000000000000..c2bf8476ce45 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com) + * Based on dt work by Russell King + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-hummingboard.dtsi" + +/ { + model = "SolidRun HummingBoard Dual/Quad"; + compatible = "solidrun,hummingboard/q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-atten-16ths = <9>; + fsl,receive-eq-mdB = <3000>; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 0db15af41cb1..f2867c4b34a8 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -9,11 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; led0 = &led0; led1 = &led1; nand = &gpmi; @@ -27,17 +27,19 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; }; @@ -48,7 +50,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -81,7 +85,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -91,7 +95,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -143,11 +147,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -159,53 +158,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -213,31 +165,53 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; +}; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; }; -&iomuxc { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; - imx6qdl-gw51xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - >; - }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw51xx { pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -256,6 +230,14 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 >; }; @@ -301,6 +283,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -332,48 +326,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; }; }; - -&pcie { - reset-gpio = <&gpio1 0 0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 234e7b755232..d3c0bf5c84e3 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet0 = &fec; led0 = &led0; led1 = &led1; led2 = &led2; @@ -20,7 +21,6 @@ ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -36,23 +36,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -63,7 +65,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -115,7 +119,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -141,11 +145,17 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -197,11 +207,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -213,65 +218,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -280,11 +226,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x13>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -297,49 +238,101 @@ compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; + +&ldb { + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; }; -&iomuxc { +&pcie { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; - imx6qdl-gw52xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ - >; - }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { + imx6qdl-gw52xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -361,6 +354,23 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* PHY Reset */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -406,6 +416,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE_RST# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -436,6 +458,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ >; }; @@ -447,85 +470,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 143f84f7812c..cade1bdc97e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -118,7 +120,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -154,7 +156,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -206,11 +208,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -222,77 +219,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - - pciclkgen: si53156@6b { - compatible = "sil,si53156"; - reg = <0x6b>; - }; - - pciswitch: pex8606@3f { - compatible = "plx,pex8606"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "lltc,ltc3676"; - reg = <0x3c>; - - regulators { - /* VDD_SOC */ - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_ARM */ - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_DDR */ - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_2P5 */ - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_1P8 */ - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - /* VDD_HIGH */ - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; }; &i2c3 { @@ -301,11 +227,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -314,65 +235,110 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; - interrupts = <11 2>; /* gpio1_11 active low */ - wakeup-gpios = <&gpio1 11 0>; + interrupts = <11 2>; + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; +}; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; - imx6qdl-gw53xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */ - MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */ - >; - }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw53xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -399,8 +365,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -446,6 +421,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -476,6 +464,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ >; }; @@ -487,90 +477,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ >; }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 16e7ad3d98ad..cf13239a1619 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -9,21 +9,19 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> + / { /* these are used by bootloader for disabling nodes */ aliases { - can0 = &can1; - ethernet0 = &fec; ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; nand = &gpmi; - sky2 = ð1; ssi0 = &ssi1; usb0 = &usbh1; usb1 = &usbotg; - usdhc2 = &usdhc3; }; chosen { @@ -39,23 +37,25 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; led0: user1 { label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ default-state = "on"; linux,default-trigger = "heartbeat"; }; led1: user2 { label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ default-state = "off"; }; led2: user3 { label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ default-state = "off"; }; }; @@ -66,7 +66,9 @@ pps { compatible = "pps-gpio"; - gpios = <&gpio1 26 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -108,7 +110,7 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -144,7 +146,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -196,11 +198,6 @@ #gpio-cells = <2>; }; - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -311,16 +308,6 @@ }; }; }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; }; &i2c3 { @@ -329,11 +316,6 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -342,59 +324,115 @@ VDDIO-supply = <®_3p3v>; }; - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - touchscreen: egalax_ts@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; + interrupts = <12 2>; + wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; +}; - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; +&ldb { + status = "okay"; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; }; }; -&iomuxc { +&pwm4 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; - imx6qdl-gw54xx { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ - MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ - MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ - MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ - >; - }; +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&ssi2 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; +&iomuxc { + imx6qdl-gw54xx { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ >; }; @@ -421,8 +459,17 @@ pinctrl_flexcan1: flexcan1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 >; }; @@ -468,6 +515,19 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 @@ -498,6 +558,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ >; }; @@ -513,90 +574,3 @@ }; }; }; - -&ldb { - status = "okay"; - - lvds-channel@1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; - }; - }; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&ssi1 { - status = "okay"; -}; - -&ssi2 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi new file mode 100644 index 000000000000..5c6587f6c420 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -0,0 +1,267 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p0v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; }; + +&usbh1 { + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw552x { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi new file mode 100644 index 000000000000..62841e85a91e --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2013,2014 Russell King + */ +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 5 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + /* IMX6 doesn't implement this yet */ + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c1>; + + /* + * Not fitted on Carrier-1 board... yet + status = "okay"; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + */ +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + +&iomuxc { + hummingboard { + pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 + >; + }; + + pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 { + fsl,pins = < + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + >; + }; + + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_hummingboard_spdif: hummingboard-spdif { + fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; + }; + + pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; + }; + + pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { + /* + * Similar to pinctrl_usbotg_2, but we want it + * pulled down for a fixed host connection. + */ + fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + }; + + pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; + }; + + pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + >; + }; + + pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + }; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_spdif>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_hummingboard_usdhc2_aux + &pinctrl_hummingboard_usdhc2 + >; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 4 0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 42ff525ebe13..08218120e770 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -174,6 +174,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -187,6 +192,25 @@ VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; + + rtc: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; }; &iomuxc { @@ -266,6 +290,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 2694aa84e187..0e50bb0a6b94 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -83,7 +83,7 @@ }; pmic@58 { - compatible = "dialog,da9063"; + compatible = "dlg,da9063"; reg = <0x58>; interrupt-parent = <&gpio4>; interrupts = <17 0x8>; /* active-low GPIO4_17 */ diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index ec43dde78525..baf2f00d519a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -54,6 +54,19 @@ gpio = <&gpio4 10 0>; enable-active-high; }; + + reg_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 0>; + regulator-always-on; + enable-active-high; + }; }; gpio-keys { @@ -314,15 +327,15 @@ imx6qdl-sabresd { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 - MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 - MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 >; }; @@ -367,9 +380,9 @@ pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 >; }; @@ -396,7 +409,13 @@ pinctrl_pcie: pciegrp { fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 >; }; @@ -468,7 +487,7 @@ gpio_leds { pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index c701af958006..9596ed5867e6 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -137,7 +137,9 @@ pcie: pcie@0x01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; - reg = <0x01ffc000 0x4000>; /* DBI */ + reg = <0x01ffc000 0x04000>, + <0x01f00000 0x80000>; + reg-names = "dbi", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -273,11 +275,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI1_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>, + <&clks IMX6QDL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -286,11 +291,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI2_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI2_IPG>, + <&clks IMX6QDL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -299,11 +307,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6q-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_SSI3_IPG>; + clocks = <&clks IMX6QDL_CLK_SSI3_IPG>, + <&clks IMX6QDL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -396,8 +407,9 @@ reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_GPT_IPG>, - <&clks IMX6QDL_CLK_GPT_IPG_PER>; - clock-names = "ipg", "per"; + <&clks IMX6QDL_CLK_GPT_IPG_PER>, + <&clks IMX6QDL_CLK_GPT_3M>; + clock-names = "ipg", "per", "osc_per"; }; gpio1: gpio@0209c000 { diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 3f9e041c0252..898d14fd765f 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -20,6 +20,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -74,6 +81,14 @@ regulator-max-microvolt = <4325000>; regulator-boot-on; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 0>; + enable-active-high; + }; }; sound { @@ -329,12 +344,6 @@ >; }; - pinctrl_led: ledgrp { - fsl,pins = < - MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 - >; - }; - pinctrl_kpp: kppgrp { fsl,pins = < MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010 @@ -346,6 +355,51 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0 + MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0 + MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0 + MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0 + MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0 + MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0 + MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0 + MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0 + MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0 + MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0 + MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0 + MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0 + MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0 + MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0 + MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0 + MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0 + MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0 + MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0 + MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0 + MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0 + MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0 + MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0 + MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0 + MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0 + MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0 + MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0 + MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0 + MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059 + >; + }; + + pinctrl_pwm1: pwmgrp { + fsl,pins = < + MX6SL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 @@ -488,6 +542,44 @@ status = "okay"; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c75800ca8b35..dfd83e6d8087 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -226,11 +226,14 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI1>; + clocks = <&clks IMX6SL_CLK_SSI1_IPG>, + <&clks IMX6SL_CLK_SSI1>; + clock-names = "ipg", "baud"; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; @@ -239,11 +242,14 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI2>; + clocks = <&clks IMX6SL_CLK_SSI2_IPG>, + <&clks IMX6SL_CLK_SSI2>; + clock-names = "ipg", "baud"; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; @@ -252,11 +258,14 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_SSI3>; + clocks = <&clks IMX6SL_CLK_SSI3_IPG>, + <&clks IMX6SL_CLK_SSI3>; + clock-names = "ipg", "baud"; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; @@ -529,6 +538,14 @@ }; }; + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; + usbphy1: usbphy@020c9000 { compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; @@ -627,8 +644,14 @@ }; lcdif: lcdif@020f8000 { + compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif"; reg = <0x020f8000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; }; dcp: dcp@020fc000 { @@ -784,7 +807,7 @@ }; ocotp: ocotp@021bc000 { - compatible = "fsl,imx6sl-ocotp"; + compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index a3980d970590..82d6b34527b7 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -24,6 +24,13 @@ reg = <0x80000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -90,6 +97,14 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + reg_lcd_3v3: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; }; sound { @@ -251,6 +266,44 @@ }; }; +&lcdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; @@ -365,6 +418,46 @@ >; }; + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 + MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 + MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 + MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 + MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 + MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 + MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 + MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 + MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 + MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 + MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 + MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 + MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 + MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 + MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 + MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 + MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 + MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 + MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 + MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 + MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 + MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 + MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 + MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 + MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 + MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 + MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 + MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp-1 { + fsl,pins = < + MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 + >; + }; + pinctrl_vcc_sd3: vccsd3grp { fsl,pins = < MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f4b9da65bc0f..888dd767a0b3 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -298,6 +298,7 @@ }; ssi1: ssi@02028000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -311,6 +312,7 @@ }; ssi2: ssi@0202c000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -324,6 +326,7 @@ }; ssi3: ssi@02030000 { + #sound-dai-cells = <0>; compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -418,7 +421,7 @@ reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_GPT_BUS>, - <&clks IMX6SX_CLK_GPT_SERIAL>; + <&clks IMX6SX_CLK_GPT_3M>; clock-names = "ipg", "per"; }; @@ -1062,6 +1065,7 @@ }; lcdif1: lcdif@02220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, @@ -1072,6 +1076,7 @@ }; lcdif2: lcdif@02224000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 03d01909525b..c358b4b9a073 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -67,6 +67,8 @@ clock-names = "usb"; interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; ranges; + dma-coherent; + dma-ranges; status = "disabled"; dwc3@25010000 { @@ -76,5 +78,16 @@ usb-phy = <&usb1_phy>, <&usb1_phy>; }; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; }; }; + +&mdio { + reg = <0x24200f00 0x100>; +}; diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index c73899c73118..d721f4b737f7 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -42,5 +42,61 @@ soc { /include/ "k2hk-clocks.dtsi" + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + + dspgpio1: keystone_dsp_gpio@2620244 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; + + dspgpio2: keystone_dsp_gpio@2620248 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; + + dspgpio3: keystone_dsp_gpio@262024c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; + + dspgpio4: keystone_dsp_gpio@2620250 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x250>; + }; + + dspgpio5: keystone_dsp_gpio@2620254 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x254>; + }; + + dspgpio6: keystone_dsp_gpio@2620258 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x258>; + }; + + dspgpio7: keystone_dsp_gpio@262025c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x25c>; + }; }; }; diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 1f7f479589e1..e32c3baa77b8 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -51,5 +51,51 @@ clocks = <&clkuart3>; interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; + + dspgpio0: keystone_dsp_gpio@02620240 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + + dspgpio1: keystone_dsp_gpio@2620244 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; + + dspgpio2: keystone_dsp_gpio@2620248 { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; + + dspgpio3: keystone_dsp_gpio@262024c { + compatible = "ti,keystone-dsp-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; }; }; + +&spi0 { + ti,davinci-spi-num-cs = <5>; +}; + +&spi1 { + ti,davinci-spi-num-cs = <3>; +}; + +&spi2 { + ti,davinci-spi-num-cs = <5>; + /* Pin muxed. Enabled and configured by Bootloader */ + status = "disabled"; +}; + +&mdio { + reg = <0x26200f00 0x100>; +}; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 9e31fe7d31f8..5d3e83fa2242 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -172,7 +172,7 @@ compatible = "ti,keystone-usbphy"; #address-cells = <1>; #size-cells = <1>; - reg = <0x2620738 32>; + reg = <0x2620738 24>; status = "disabled"; }; @@ -277,5 +277,13 @@ clock-names = "fck"; bus_freq = <2500000>; }; + + kirq0: keystone_irq@26202a0 { + compatible = "ti,keystone-irq"; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <1>; + ti,syscon-dev = <&devctrl 0x2a0>; + }; }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi new file mode 100644 index 000000000000..e6539ea5a711 --- /dev/null +++ b/arch/arm/boot/dts/meson.dtsi @@ -0,0 +1,110 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x14>; + interrupts = <0 10 1>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + wdt: watchdog@c1109900 { + compatible = "amlogic,meson6-wdt"; + reg = <0xc1109900 0x8>; + }; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_A: serial@c81084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81084c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_B: serial@c81084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc81084dc 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + + uart_C: serial@c8108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc8108700 0x14>; + interrupts = <0 90 1>; + clocks = <&clk81>; + status = "disabled"; + }; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts new file mode 100644 index 000000000000..dc2541faf1ec --- /dev/null +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "meson6.dtsi" + +/ { + model = "Geniatech ATV1200"; + compatible = "geniatech,atv1200"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi new file mode 100644 index 000000000000..4ba49127779f --- /dev/null +++ b/arch/arm/boot/dts/meson6.dtsi @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Carlo Caione <carlo@caione.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "meson.dtsi" + +/ { + model = "Amlogic Meson6 SoC"; + compatible = "amlogic,meson6"; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x201>; + }; + }; + + clk81: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts index 443b4467de15..0da047013120 100644 --- a/arch/arm/boot/dts/mt6589-aquaris5.dts +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -18,6 +18,11 @@ / { model = "bq Aquaris5"; + compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; + + chosen { + bootargs = "earlyprintk"; + }; memory { reg = <0x80000000 0x40000000>; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index d0297a051549..e3c7600ddb38 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -81,8 +81,8 @@ clock-names = "system-clk", "rtc-clk"; }; - gic: interrupt-controller@10212000 { - compatible = "arm,cortex-a15-gic"; + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; reg = <0x10211000 0x1000>, diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 9be3c1266378..ae89aad01595 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -159,6 +159,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_iva: iva { + ti,mbox-tx = <2 1 3>; + ti,mbox-rx = <3 1 3>; + }; }; timer1: timer@48028000 { diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 1a00f15d9096..b56d71611026 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -249,6 +249,10 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <6>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; timer1: timer@49018000 { diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 1becefce821b..06a8aec4e6ea 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -174,8 +174,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dtsi index 021311f7964b..fd34f913ace3 100644 --- a/arch/arm/boot/dts/omap3-gta04.dts +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -26,6 +26,10 @@ reg = <0x80000000 0x20000000>; /* 512 MB */ }; + aliases { + display0 = &lcd; + }; + gpio-keys { compatible = "gpio-keys"; @@ -74,9 +78,30 @@ }; }; }; + + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + }; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_pins + >; + + hsusb2_pins: pinmux_hsusb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ @@ -141,12 +166,31 @@ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusb2_2_pins + >; + + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; spi_gpio_pins: spi_gpio_pinmux { - pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */ - 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */ - 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */ - 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */ + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ + OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ + OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */ + OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */ >; }; }; @@ -196,6 +240,9 @@ #size-cells = <0>; reg = <0x45>; + gpio-controller; + #gpio-cells = <2>; + gta04_led0: red_aux@0 { label = "gta04:red:aux"; reg = <0x0>; @@ -216,11 +263,16 @@ label = "gta04:green:power"; reg = <0x4>; }; + + wifi_reset: wifi_reset@6 { + reg = <0x6>; + compatible = "gpio"; + }; }; /* compass aka magnetometer */ hmc5843@1e { - compatible = "honeywell,hmc5843"; + compatible = "honeywell,hmc5883l"; reg = <0x1e>; }; @@ -248,6 +300,14 @@ power = <50>; }; +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -286,11 +346,37 @@ bb_uamp = <150>; }; +/* spare */ +&vaux1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; +}; + +/* sensors */ +&vaux2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +/* camera */ +&vaux3 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; +}; + +/* WLAN/BT */ &vaux4 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3150000>; }; +/* GPS LNA */ +&vsim { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; +}; + /* Needed to power the DPI pins */ &vpll2 { regulator-always-on; @@ -309,3 +395,57 @@ }; }; }; + +&gpmc { + ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts new file mode 100644 index 000000000000..3099a892cf50 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a3.dts @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A3"; +}; + +&i2c2 { + + /* alternate accelerometer that might be installed on some GTA04A3 boards */ + lis302@1d { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x1d>; + interrupt-parent = <&gpio3>; + interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + Vdd-supply = <&vaux2>; + Vdd_IO-supply = <&vaux2>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <8>; + st,click-thresh-y = <8>; + st,click-thresh-z = <10>; + st,click-click-time-limit = <9>; + st,click-latency = <50>; + st,irq1-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <32>; + st,min-limit-y = <3>; + st,min-limit-z = <3>; + st,max-limit-x = <3>; + st,max-limit-y = <32>; + st,max-limit-z = <32>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts new file mode 100644 index 000000000000..c918bb1f0529 --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a4.dts @@ -0,0 +1,13 @@ +/* + * Copyright (C) 2014 Marek Belisko <marek@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A4"; +}; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts new file mode 100644 index 000000000000..52b386f6865b --- /dev/null +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04.dtsi" + +/ { + model = "Goldelico GTA04A5"; + + sound { + ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi new file mode 100644 index 000000000000..bd66545ef954 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-common.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + gpio_poweroff { + pinctrl-names = "default"; + pinctrl-0 = <&poweroff_pins>; + + compatible = "gpio-poweroff"; + gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */ + }; +}; + +&omap3_pmx_core { + sound2_pins: pinmux_sound2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */ + >; + }; + + led_blue_pins: pinmux_led_blue_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */ + >; + }; + + led_green_pins: pinmux_led_green_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */ + >; + }; + + led_red_pins: pinmux_led_red_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */ + >; + }; + + poweroff_pins: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */ + >; + }; + + powerdown_input_pins: pinmux_powerdown_input_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */ + >; + }; + + fpga_boot0_pins: fpga_boot0_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */ + >; + }; + + fpga_boot1_pins: fpga_boot1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts new file mode 100644 index 000000000000..11aa28d73f3a --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + &touchscreen_wake_pins + >; + + touchscreen_irq_pins: pinmux_touchscreen_irq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */ + >; + }; + + touchscreen_wake_pins: pinmux_touchscreen_wake_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4) /* gpio_110, Touchscreen Wake */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <31250000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <86>; + hsync-len = <1>; + vback-porch = <30>; + vfront-porch = <13>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +}; diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts new file mode 100644 index 000000000000..fde325688fb9 --- /dev/null +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-ha-common.dtsi" + +/ { + model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM"; + compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb2_pins + &powerdown_input_pins + &fpga_boot0_pins + &fpga_boot1_pins + &led_blue_pins + &led_green_pins + &led_red_pins + >; +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index af272c156e21..72dca0b7904d 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -159,6 +159,11 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_power: power { + compatible = "ti,twl4030-power-idle"; + ti,use_poweroff; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4361777a08d8..9b0494a8ab45 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -134,24 +134,32 @@ >; }; + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */ + OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ >; }; @@ -578,6 +586,8 @@ &gpmc { ranges = <0 0 0x04000000 0x10000000>; /* 256MB */ + ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */ + <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */ /* gpio-irq for dma: 65 */ @@ -646,6 +656,38 @@ reg = <0x004c0000 0x0fb40000>; }; }; + + ethernet@gpmc { + compatible = "smsc,lan91c94"; + interrupt-parent = <&gpio2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ + reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + bank-width = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <48>; + gpmc,cs-wr-off-ns = <24>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <0>; + gpmc,adv-wr-off-ns = <0>; + gpmc,we-on-ns = <12>; + gpmc,we-off-ns = <18>; + gpmc,oe-on-ns = <12>; + gpmc,oe-off-ns = <48>; + gpmc,page-burst-access-ns = <0>; + gpmc,access-ns = <42>; + gpmc,rd-cycle-ns = <180>; + gpmc,wr-cycle-ns = <180>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <0>; + gpmc,wr-data-mux-bus-ns = <12>; + }; }; &mcspi1 { diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi index 5831bcc52966..520453d95704 100644 --- a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi @@ -36,8 +36,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ >; }; }; @@ -88,6 +88,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi new file mode 100644 index 000000000000..b30f387d3a83 --- /dev/null +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -0,0 +1,337 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap34xx-hs.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + startup-delay-us = <70000>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */ + vcc-supply = <&hsusb2_power>; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + /* McBSP2 is used for onboard sound, same as on beagle */ + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + + /* Regulator to enable/switch the vcc of the Wifi module */ + mmc2_sdio_poweron: regulator-mmc2-sdio-poweron { + compatible = "regulator-fixed"; + regulator-name = "regulator-mmc2-sdio-poweron"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */ + enable-active-low; + startup-delay-us = <10000>; + }; +}; + +&omap3_pmx_core { + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ + OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ + OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + /* wlan GPIO output for WLAN_EN */ + wlan_gpio: pinmux_wlan_gpio { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */ + OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */ + OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */ + OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */ + >; + }; +}; + +/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */ +&mcbsp1 { + status = "disabled"; +}; + +&mcbsp2 { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpha; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + cd-gpios = <&twl_gpio 0 0>; + bus-width = <8>; +}; + +// WiFi (Marvell 88W8686) on MMC2/SDIO +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&mmc2_sdio_poweron>; + non-removable; + bus-width = <4>; + cap-power-off-card; +}; + +&mmc3 { + status = "disabled"; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&mcbsp3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x01000000>; + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */ + ti,nand-ecc-opt = "sw"; + + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts new file mode 100644 index 000000000000..d659515ab9b8 --- /dev/null +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-tao3530.dtsi" + +/ { + model = "TI OMAP3 Thunder baseboard with TAO3530 SOM"; + compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3"; +}; + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; + + lte430_pins: pinmux_lte430_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; +}; + +/* Needed to power the DPI pins */ +&vpll2 { + regulator-always-on; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +/ { + aliases { + display0 = &lcd0; + }; + + lcd0: display@0 { + compatible = "samsung,lte430wq-f0c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <<e430_pins>; + enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */ + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <2>; + vfront-porch = <3>; + vsync-len = <11>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + backlight { + compatible = "gpio-backlight"; + + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */ + + default-on; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 3136ed1a04ba..226f3631c230 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -335,6 +335,10 @@ interrupts = <26>; ti,mbox-num-users = <2>; ti,mbox-num-fifos = <2>; + mbox_dsp: dsp { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 8a944974d72e..878c979203d0 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -663,6 +663,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4a318000 { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 429471aa7a1f..b54b271e153b 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -16,6 +16,12 @@ reg = <0x80000000 0x7F000000>; /* 2048 MB */ }; + aliases { + display0 = &hdmi0; + display1 = &dvi0; + display2 = &lcd0; + }; + vmmcsd_fixed: fixed-regulator-mmcsd { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -45,6 +51,13 @@ enable-active-high; }; + ads7846reg: ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; @@ -66,6 +79,105 @@ default-state = "off"; }; }; + + lcd0: display { + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_conn_pins>; + + hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_dvi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@1 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c2>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; +}; + +&omap5_pmx_wkup { + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + 0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ + >; + }; }; &omap5_pmx_core { @@ -88,6 +200,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */ @@ -127,8 +246,8 @@ wlan_gpios_pins: pinmux_wlan_gpios_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */ - OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */ + OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */ + OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */ >; }; @@ -144,6 +263,104 @@ OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */ + OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */ + OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */ + >; + }; + + lcd_pins: pinmux_lcd_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */ + >; + }; + + hdmi_conn_pins: pinmux_hdmi_conn_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */ + OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */ + OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */ + OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */ + OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */ + OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */ + OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */ + OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */ + OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */ + OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */ + OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */ + OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */ + OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */ + OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */ + OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */ + OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */ + OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */ + OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */ + OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */ + OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */ + OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */ + OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */ + OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */ + OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */ + OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */ + OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */ + OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */ + OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */ + >; + }; + + mcspi2_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */ + OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio1>; + interrupts = <15 0>; /* gpio1_wk15 */ + pendown-gpio = <&gpio1 15 0>; + + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + ti,debounce-max = /bits/ 16 <30>; + ti,debounce-tol = /bits/ 16 <10>; + ti,debounce-rep = /bits/ 16 <1>; + + linux,wakeup; + }; }; &mmc1 { @@ -398,6 +615,13 @@ }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + &usbhshost { port2-mode = "ehci-hsic"; port3-mode = "ehci-hsic"; @@ -407,6 +631,50 @@ phys = <0 &hsusb2_phy &hsusb3_phy>; }; +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_dvi_out: endpoint@0 { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + + dpi_lcd_out: endpoint@1 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&dsi2 { + status = "ok"; + vdd-supply = <&ldo4_reg>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts index aa98fea3f2b3..337bbbc01a35 100644 --- a/arch/arm/boot/dts/omap5-sbc-t54.dts +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -1,11 +1,11 @@ /* - * Suppport for CompuLab SBC-T54 with CM-T54 + * Suppport for CompuLab CM-T54 on SB-T54 baseboard */ #include "omap5-cm-t54.dts" / { - model = "CompuLab SBC-T54 with CM-T54"; + model = "CompuLab CM-T54 on SB-T54"; compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; }; @@ -19,8 +19,8 @@ mmc1_aux_pins: pinmux_mmc1_aux_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */ - OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */ + OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */ + OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */ >; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4a6091d717b5..256b7f69e45b 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -189,18 +189,22 @@ }; omap5_pmx_core: pinmux@4a002840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; omap5_pmx_wkup: pinmux@4ae0c840 { - compatible = "ti,omap4-padconf", "pinctrl-single"; + compatible = "ti,omap5-padconf", "pinctrl-single"; reg = <0x4ae0c840 0x0038>; #address-cells = <1>; #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; @@ -454,7 +458,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -462,7 +466,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -470,7 +474,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -478,7 +482,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -486,7 +490,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -494,7 +498,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -649,6 +653,14 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; }; timer1: timer@4ae18000 { @@ -952,6 +964,15 @@ clock-names = "fck"; }; + rfbi: encoder@58002000 { + compatible = "ti,omap5-rfbi"; + reg = <0x58002000 0x100>; + status = "disabled"; + ti,hwmods = "dss_rfbi"; + clocks = <&dss_dss_clk>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + dsi1: encoder@58004000 { compatible = "ti,omap5-dsi"; reg = <0x58004000 0x200>, diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index a5e90f078aa9..c08f84629aa9 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -113,14 +113,14 @@ }; usb0: ohci@4c000000 { - compatible = "mrvl,pxa-ohci"; + compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; status = "disabled"; }; mmc0: mmc@41100000 { - compatible = "mrvl,pxa-mmc"; + compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; interrupts = <23>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 7c2441d526bc..b396c8311b27 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -5,6 +5,33 @@ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; @@ -12,5 +39,21 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92bf793622c3..b3154c071652 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,7 +2,9 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm APQ8064"; @@ -70,6 +72,34 @@ ranges; compatible = "simple-bus"; + tlmm_pinmux: pinctrl@800000 { + compatible = "qcom,apq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&ps_hold>; + + sdc4_gpios: sdc4-gpios { + pios { + pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; + function = "sdc4"; + }; + }; + + ps_hold: ps_hold { + mux { + pins = "gpio78"; + function = "ps_hold"; + }; + }; + }; + intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -133,6 +163,48 @@ regulator; }; + gsbi1: gsbi@12440000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c1: i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <0 194 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi2: gsbi@12480000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c2: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -166,5 +238,116 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + mmcc: clock-controller@4000000 { + compatible = "qcom,mmcc-apq8064"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <0 98 0>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <0 96 0>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc4bam:dma@121c2000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x121c2000 0x8000>; + interrupts = <0 95 0>; + clocks = <&gcc SDC4_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc4: sdcc@121c0000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x121c0000 0x2000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + vmmc-supply = <&vsdcc_fixed>; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&sdc4_gpios>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index b4dfb01fe6fb..47370494d0f8 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -22,6 +22,13 @@ pinctrl@fd510000 { + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + }; + }; + spi8_default: spi8_default { mosi { pins = "gpio45"; @@ -41,5 +48,19 @@ }; }; }; + + i2c@f9967000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c11_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts new file mode 100644 index 000000000000..c9ff10821ad9 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -0,0 +1,23 @@ +#include "qcom-apq8084.dtsi" + +/ { + model = "Qualcomm APQ8084/IFC6540"; + compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "okay"; + }; + + sdhci@f98a4900 { + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; + bus-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index 9dae3878b71d..8ecec58a9ff6 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -3,4 +3,10 @@ / { model = "Qualcomm APQ 8084-MTP"; compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + + soc { + serial@f995e000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index e3e009a5912b..1f130bc16858 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -2,6 +2,9 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-apq8084.h> +#include <dt-bindings/gpio/gpio.h> + / { model = "Qualcomm APQ 8084"; compatible = "qcom,apq8084"; @@ -175,5 +178,53 @@ compatible = "qcom,pshold"; reg = <0xfc4ab000 0x4>; }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,apq8084-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; + + serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <0 114 0x0>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts new file mode 100644 index 000000000000..95e64955fb8e --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -0,0 +1,85 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/AP148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + + i2c4: i2c@16380000 { + status = "ok"; + + clock-frequency = <200000>; + + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi new file mode 100644 index 000000000000..7093b075e408 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -0,0 +1 @@ +#include "qcom-ipq8064.dtsi" diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi new file mode 100644 index 000000000000..244f857f0e6f --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -0,0 +1,250 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-ipq806x.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 32 0x4>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 0>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 45180adfadf1..e0883c376248 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8660.dtsi" / { @@ -12,5 +14,45 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 53837aaa2f72..0affd6193f56 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -103,6 +104,98 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8058"; + interrupt-parent = <&msmgpio>; + interrupts = <88 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8058-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + }; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; }; }; + }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 8f75cc4c8340..7f70fae90959 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -1,3 +1,5 @@ +#include <dt-bindings/input/input.h> + #include "qcom-msm8960.dtsi" / { @@ -12,5 +14,30 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + }; + }; +}; + +&pmicintc { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 5303e53e34dc..e1b0d5cd9e3c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -143,6 +144,43 @@ compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupt-parent = <&msmgpio>; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + }; }; rng@1a500000 { @@ -151,5 +189,54 @@ clocks = <&gcc PRNG_CLK>; clock-names = "core"; }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 69dca2aca25a..e265ec16a787 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,8 +1,8 @@ /dts-v1/; -#include "skeleton.dtsi" - +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include "skeleton.dtsi" / { model = "Qualcomm MSM8974"; @@ -236,5 +236,16 @@ #interrupt-cells = <2>; interrupts = <0 208 0>; }; + + blsp_i2c11: i2c@f9967000 { + status = "disable"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <0 105 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index d8ec5058c351..ef152e384822 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -51,7 +51,7 @@ }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; @@ -90,7 +90,7 @@ }; irqc1: interrupt-controller@e61c0200 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a73a4", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; @@ -165,7 +165,7 @@ }; thermal@e61f0000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 72891e5f0f1b..7cfba9aa1b41 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -199,7 +199,6 @@ scif0: serial@ffe40000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -209,7 +208,6 @@ scif1: serial@ffe41000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe41000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -219,7 +217,6 @@ scif2: serial@ffe42000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe42000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -229,7 +226,6 @@ scif3: serial@ffe43000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe43000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -239,7 +235,6 @@ scif4: serial@ffe44000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe44000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -249,7 +244,6 @@ scif5: serial@ffe45000 { compatible = "renesas,scif-r8a7779", "renesas,scif"; reg = <0xffe45000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg_clocks R8A7779_CLK_P>; clock-names = "sci_ick"; @@ -262,7 +256,7 @@ }; thermal@ffc48000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; reg = <0xffc48000 0x38>; }; @@ -446,10 +440,10 @@ /* Gate clocks */ mstp0_clks: clocks@ffc80030 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; clocks = <&cpg_clocks R8A7779_CLK_S>, - <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_S>, @@ -483,7 +477,7 @@ }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc80034 4>, <0xffc80044 4>; clocks = <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -512,7 +506,7 @@ }; mstp3_clks: clocks@ffc8003c { compatible = "renesas,r8a7779-mstp-clocks", - "renesas,cpg-mstp-clocks"; + "renesas,cpg-mstp-clocks"; reg = <0xffc8003c 4>; clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 7853c2c15ce6..69098b906b39 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -32,7 +32,7 @@ reg = <0 0x40000000 0 0x40000000>; }; - memory@180000000 { + memory@140000000 { device_type = "memory"; reg = <1 0x40000000 0 0xc0000000>; }; @@ -234,6 +234,11 @@ renesas,groups = "usb2"; renesas,function = "usb2"; }; + + vin1_pins: vin { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -370,6 +375,19 @@ status = "ok"; pinctrl-0 = <&iic2_pins>; pinctrl-names = "default"; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; }; &iic3 { @@ -378,7 +396,7 @@ status = "okay"; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -405,3 +423,21 @@ pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; }; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "ok"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index aa146d2d1022..d0e17733dc1a 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -33,6 +33,10 @@ spi2 = &msiof1; spi3 = &msiof2; spi4 = &msiof3; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; + vin3 = &vin3; }; cpus { @@ -249,6 +253,65 @@ <0 3 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -505,6 +568,38 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -773,33 +868,36 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 + R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 + R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "msiof3", "scifb2"; + "scifb1", "msiof1", "msiof3", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -916,6 +1014,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -924,9 +1024,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -934,9 +1036,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -944,9 +1048,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -954,9 +1060,11 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6c90000 0 0x0064>; + reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>; interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + dmas = <&dmac0 0x45>, <&dmac0 0x46>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1050,7 +1158,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 3a2ef0a2a137..f1b56de10205 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -135,6 +135,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif0 { @@ -191,6 +196,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &qspi { @@ -260,3 +278,20 @@ &pciec { status = "okay"; }; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 740308e09457..07550e775e80 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -284,6 +284,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin1_pins: vin1 { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -411,6 +416,19 @@ status = "okay"; clock-frequency = <400000>; + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>; @@ -423,7 +441,7 @@ clock-frequency = <100000>; vdd_dvfs: regulator@68 { - compatible = "diasemi,da9210"; + compatible = "dlg,da9210"; reg = <0x68>; regulator-min-microvolt = <1000000>; @@ -456,3 +474,20 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; }; + +/* composite video input */ +&vin1 { + status = "ok"; + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index e270f38d827f..e06c11fa8698 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -34,6 +34,9 @@ spi1 = &msiof0; spi2 = &msiof1; spi3 = &msiof2; + vin0 = &vin0; + vin1 = &vin1; + vin2 = &vin2; }; cpus { @@ -238,6 +241,66 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -550,6 +613,30 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN1>; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7791"; + clocks = <&mstp8_clks R8A7791_CLK_VIN2>; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -802,16 +889,16 @@ mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; - clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 + R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = - "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy"; }; mstp2_clks: mstp2_clks@e6150138 { @@ -957,6 +1044,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -965,9 +1054,11 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -975,9 +1066,11 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -985,9 +1078,11 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1061,7 +1156,6 @@ rcar_sound: rcar_sound@0xec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; - interrupt-parent = <&gic>; reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts new file mode 100644 index 000000000000..79d06ef017a0 --- /dev/null +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -0,0 +1,47 @@ +/* + * Device Tree Source for the Alt board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7794.dtsi" + +/ { + model = "Alt"; + compatible = "renesas,alt", "renesas,r8a7794"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&cmt0 { + status = "ok"; +}; + +&scif2 { + status = "ok"; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi new file mode 100644 index 000000000000..d4e8bce1e0b7 --- /dev/null +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -0,0 +1,531 @@ +/* + * Device Tree Source for the r8a7794 SoC + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2014 Ulrich Hecht + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7794-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "renesas,r8a7794"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7794_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_CMT1>; + clock-names = "fck"; + + renesas,channels-mask = <0xff>; + + status = "disabled"; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7794", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7794", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c20000 0 64>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6c30000 0 64>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7794", "renesas,scifb"; + reg = <0 0xe6ce0000 0 64>; + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7794", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7794", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7794-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "z"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7794_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + acp_clk: acp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "acp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7794_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, + <&zs_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 + R8A7794_CLK_CMT0 R8A7794_CLK_TMU0 + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0 + R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1 + R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", + "scifb1", "msiof1", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_CMT1 + >; + clock-output-names = + "cmt1"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5 + R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0 + R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1 + R8A7794_CLK_SCIF0 + >; + clock-output-names = + "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "scif3", "scif2", "scif1", "scif0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_ETHER + >; + clock-output-names = + "ether"; + }; + mstp11_clks: mstp11_clks@e615099c { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5 + >; + clock-output-names = "scifa3", "scifa4", "scifa5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c9d912da6141..d5344510c676 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -152,12 +152,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &mmc1 { /* wifi */ @@ -168,11 +164,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &uart0 { diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 879a818fba51..ad9c2db59670 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -179,6 +179,27 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, @@ -238,6 +259,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, @@ -406,6 +463,16 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 5e4e3c238b2d..39f66e349445 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -65,6 +65,19 @@ pinctrl-0 = <&ir_recv_pin>; }; + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + vcc_sd0: sdmmc-regulator { compatible = "regulator-fixed"; regulator-name = "sdmmc-supply"; @@ -74,12 +87,36 @@ startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; }; &i2c1 { status = "okay"; clock-frequency = <400000>; + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + act8846: act8846@5a { compatible = "active-semi,act8846"; reg = <0x5a>; @@ -149,7 +186,6 @@ regulator-name = "VCC_RMII"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; vccio_wl: REG10 { @@ -183,11 +219,8 @@ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - }; + bus-width = <4>; + disable-wp; }; &pinctrl { @@ -201,11 +234,26 @@ }; }; + hym8563 { + rtc_int: rtc-int { + rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + ir-receiver { ir_recv_pin: ir-recv-pin { rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &uart0 { @@ -224,6 +272,14 @@ status = "okay"; }; +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ee801a9c6b74..82732f5249b2 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -147,6 +147,27 @@ bias-disable; }; + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_rst: emmc-rst { + rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>; + }; + + /* + * The data pins are shared between nandc and emmc and + * not accessible through pinctrl. Also they should've + * been already set correctly by firmware, as + * flash/emmc is the boot-device. + */ + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, @@ -206,6 +227,42 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>; + }; + spi1_cs1: spi1-cs1 { + rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, @@ -381,6 +438,18 @@ pinctrl-0 = <&pwm3_out>; }; +&spi0 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; +}; + +&spi1 { + compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 7d59ff4de408..a76dd44adb53 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -26,7 +26,7 @@ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; + pinctrl-0 = <&pmic_int>; #clock-cells = <0>; clock-output-names = "xin32k"; @@ -124,11 +124,3 @@ }; }; }; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 9a88b6c66396..ff522f8e3df4 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -16,3 +16,135 @@ / { compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4f572093c8b4..cb83cea52fa1 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -10,6 +10,7 @@ * GNU General Public License for more details. */ +#include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" / { @@ -17,6 +18,48 @@ reg = <0x0 0x80000000>; }; + backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -49,6 +92,30 @@ }; }; +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + &i2c0 { status = "okay"; }; @@ -57,6 +124,10 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + &uart0 { status = "okay"; }; @@ -78,12 +149,24 @@ }; &pinctrl { + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + buttons { pwrbtn: pwrbtn { rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; @@ -94,3 +177,7 @@ &usb_host0_ehci { status = "okay"; }; + +&usb_host1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 5950b0a53224..874e66dbb93b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -29,11 +29,18 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + mshc0 = &emmc; + mshc1 = &sdmmc; + mshc2 = &sdio0; + mshc3 = &sdio1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; }; cpus { @@ -62,6 +69,44 @@ }; }; + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff250000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + + dmac_bus_ns: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff600000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac_bus_s: dma-controller@ffb20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffb20000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + }; + }; + xin24m: oscillator { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -78,6 +123,95 @@ clock-frequency = <24000000>; }; + sdmmc: dwmmc@ff0c0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0c0000 0x4000>; + status = "disabled"; + }; + + sdio0: dwmmc@ff0d0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0d0000 0x4000>; + status = "disabled"; + }; + + sdio1: dwmmc@ff0e0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0e0000 0x4000>; + status = "disabled"; + }; + + emmc: dwmmc@ff0f0000 { + compatible = "rockchip,rk3288-dw-mshc"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xff0f0000 0x4000>; + status = "disabled"; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,saradc"; + reg = <0xff100000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@ff110000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; + reg = <0xff110000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff120000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; + reg = <0xff120000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@ff130000 { + compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; + reg = <0xff130000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c1: i2c@ff140000 { compatible = "rockchip,rk3288-i2c"; reg = <0xff140000 0x1000>; @@ -206,6 +340,26 @@ /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + usb_host1: usb@ff540000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff540000 0x40000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST1>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_otg: usb@ff580000 { + compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0xff580000 0x40000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + usb_hsic: usb@ff5c0000 { compatible = "generic-ehci"; reg = <0xff5c0000 0x100>; @@ -241,6 +395,50 @@ status = "disabled"; }; + pwm0: pwm@ff680000 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680000 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm1: pwm@ff680010 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680010 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm2: pwm@ff680020 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680020 0x10>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + + pwm3: pwm@ff680030 { + compatible = "rockchip,rk3288-pwm"; + reg = <0xff680030 0x10>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + status = "disabled"; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -271,6 +469,21 @@ status = "disabled"; }; + i2s: i2s@ff890000 { + compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; + reg = <0xff890000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; + dma-names = "tx", "rx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + gic: interrupt-controller@ffc01000 { compatible = "arm,gic-400"; interrupt-controller; @@ -463,6 +676,17 @@ }; }; + i2s0 { + i2s0_bus: i2s0-bus { + rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>, + <6 1 RK_FUNC_1 &pcfg_pull_none>, + <6 2 RK_FUNC_1 &pcfg_pull_none>, + <6 3 RK_FUNC_1 &pcfg_pull_none>, + <6 4 RK_FUNC_1 &pcfg_pull_none>, + <6 8 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_clk: sdmmc-clk { rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; @@ -488,6 +712,88 @@ }; }; + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>, + <4 21 RK_FUNC_1 &pcfg_pull_up>, + <4 22 RK_FUNC_1 &pcfg_pull_up>, + <4 23 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sdio1 { + sdio1_bus1: sdio1-bus1 { + rockchip,pins = <3 24 4 &pcfg_pull_up>; + }; + + sdio1_bus4: sdio1-bus4 { + rockchip,pins = <3 24 4 &pcfg_pull_up>, + <3 25 4 &pcfg_pull_up>, + <3 26 4 &pcfg_pull_up>, + <3 27 4 &pcfg_pull_up>; + }; + + sdio1_cd: sdio1-cd { + rockchip,pins = <3 28 4 &pcfg_pull_up>; + }; + + sdio1_wp: sdio1-wp { + rockchip,pins = <3 29 4 &pcfg_pull_up>; + }; + + sdio1_bkpwr: sdio1-bkpwr { + rockchip,pins = <3 30 4 &pcfg_pull_up>; + }; + + sdio1_int: sdio1-int { + rockchip,pins = <3 31 4 &pcfg_pull_up>; + }; + + sdio1_cmd: sdio1-cmd { + rockchip,pins = <4 6 4 &pcfg_pull_up>; + }; + + sdio1_clk: sdio1-clk { + rockchip,pins = <4 7 4 &pcfg_pull_none>; + }; + + sdio1_pwr: sdio1-pwr { + rockchip,pins = <4 9 4 &pcfg_pull_up>; + }; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; @@ -524,6 +830,56 @@ }; }; + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs0: spi0-cs0 { + rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_tx: spi0-tx { + rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_rx: spi0-rx { + rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>; + }; + spi0_cs1: spi0-cs1 { + rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_cs0: spi1-cs0 { + rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_rx: spi1-rx { + rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>; + }; + spi1_tx: spi1-tx { + rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spi2 { + spi2_cs1: spi2-cs1 { + rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_clk: spi2-clk { + rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_cs0: spi2-cs0 { + rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_rx: spi2-rx { + rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>; + }; + spi2_tx: spi2-tx { + rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + uart0 { uart0_xfer: uart0-xfer { rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, @@ -591,5 +947,29 @@ rockchip,pins = <5 15 3 &pcfg_pull_none>; }; }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <7 22 3 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <7 23 3 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 8caf85d83901..7332d12eb565 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -26,6 +26,49 @@ i2c2 = &i2c2; i2c3 = &i2c3; i2c4 = &i2c4; + mshc0 = &emmc; + mshc1 = &mmc0; + mshc2 = &mmc1; + spi0 = &spi0; + spi1 = &spi1; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac1_s: dma-controller@20018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20018000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + }; + + dmac1_ns: dma-controller@2001c000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x2001c000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dmac2: dma-controller@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMA2>; + clock-names = "apb_pclk"; + }; }; xin24m: oscillator { @@ -91,12 +134,28 @@ status = "disabled"; }; + usb_otg: usb@10180000 { + compatible = "rockchip,rk3066-usb", "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG0>; + clock-names = "otg"; + status = "disabled"; + }; + + usb_host: usb@101c0000 { + compatible = "snps,dwc2"; + reg = <0x101c0000 0x40000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG1>; + clock-names = "otg"; + status = "disabled"; + }; + mmc0: dwmmc@10214000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; @@ -108,8 +167,6 @@ compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10218000 0x1000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; clock-names = "biu", "ciu"; @@ -117,6 +174,17 @@ status = "disabled"; }; + emmc: dwmmc@1021c000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x1021c000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + pmu: pmu@20004000 { compatible = "rockchip,rk3066-pmu", "syscon"; reg = <0x20004000 0x100>; @@ -135,7 +203,6 @@ #size-cells = <0>; rockchip,grf = <&grf>; - rockchip,bus-index = <0>; clock-names = "i2c"; clocks = <&cru PCLK_I2C0>; @@ -264,4 +331,36 @@ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; status = "disabled"; }; + + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + spi0: spi@20070000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20070000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@20074000 { + compatible = "rockchip,rk3066-spi"; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x20074000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 45013b867c8d..5f4144d1e3a1 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -177,6 +177,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; clocks = <&usart0_clk>; @@ -188,6 +191,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf0020000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; clocks = <&usart1_clk>; @@ -333,6 +339,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; clocks = <&usart2_clk>; @@ -344,6 +353,9 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&usart3_clk>; @@ -402,14 +414,19 @@ }; ramc0: ramc@ffffea00 { - compatible = "atmel,at91sam9g45-ddramc"; + compatible = "atmel,sama5d3-ddramc"; reg = <0xffffea00 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; @@ -428,7 +445,7 @@ pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B C */ @@ -1003,6 +1020,11 @@ reg = <2>; }; + hsmc_clk: hsmc_clk { + #clock-cells = <0>; + reg = <5>; + }; + pioA_clk: pioA_clk { #clock-cells = <0>; reg = <6>; @@ -1170,6 +1192,11 @@ #clock-cells = <0>; reg = <48>; }; + + mpddr_clk: mpddr_clk { + #clock-cells = <0>; + reg = <49>; + }; }; }; @@ -1178,6 +1205,11 @@ reg = <0xfffffe00 0x10>; }; + shutdown-controller@fffffe10 { + compatible = "atmel,at91sam9x5-shdwc"; + reg = <0xfffffe10 0x10>; + }; + pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; @@ -1393,6 +1425,7 @@ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; + clocks = <&hsmc_clk>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi index a0775851cce5..eaf41451ad0c 100644 --- a/arch/arm/boot/dts/sama5d3_can.dtsi +++ b/arch/arm/boot/dts/sama5d3_can.dtsi @@ -40,7 +40,7 @@ atmel,clk-output-range = <0 66000000>; }; - can1_clk: can0_clk { + can1_clk: can1_clk { #clock-cells = <0>; reg = <41>; atmel,clk-output-range = <0 66000000>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f7d8583eef82..962dc28dc37b 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -36,6 +36,36 @@ macb0: ethernet@f0028000 { phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; }; pmc: pmc@fffffc00 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index b8c6f20e780c..49c10d33df30 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -25,6 +25,8 @@ }; spi0: spi@f0004000 { + dmas = <0>, <0>; /* Do not use DMA for spi0 */ + m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; @@ -51,6 +53,7 @@ }; usart1: serial@f0020000 { + dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; @@ -132,6 +135,7 @@ }; dbgu: serial@ffffee00 { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 99659db97e89..30ef97e99dc5 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -66,7 +66,7 @@ }; vmmc_sdhi0: regulator@2 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -75,7 +75,7 @@ }; vmmc_sdhi2: regulator@3 { - compatible = "regulator-fixed"; + compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index d7f52cf31350..030a5920312f 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,sh73a0"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH 0 2 IRQ_TYPE_LEVEL_HIGH 0 3 IRQ_TYPE_LEVEL_HIGH @@ -86,7 +86,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH 0 10 IRQ_TYPE_LEVEL_HIGH 0 11 IRQ_TYPE_LEVEL_HIGH @@ -107,7 +106,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH @@ -127,7 +125,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH 0 26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH @@ -143,7 +140,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH 0 168 IRQ_TYPE_LEVEL_HIGH 0 169 IRQ_TYPE_LEVEL_HIGH @@ -156,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH 0 52 IRQ_TYPE_LEVEL_HIGH 0 53 IRQ_TYPE_LEVEL_HIGH @@ -169,7 +164,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH 0 172 IRQ_TYPE_LEVEL_HIGH 0 173 IRQ_TYPE_LEVEL_HIGH @@ -182,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH 0 184 IRQ_TYPE_LEVEL_HIGH 0 185 IRQ_TYPE_LEVEL_HIGH @@ -195,7 +188,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH 0 188 IRQ_TYPE_LEVEL_HIGH 0 189 IRQ_TYPE_LEVEL_HIGH @@ -206,7 +198,6 @@ mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH 0 141 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; @@ -216,7 +207,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH 0 84 IRQ_TYPE_LEVEL_HIGH 0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -228,7 +218,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH 0 89 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -239,7 +228,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH 0 105 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; @@ -250,7 +238,6 @@ scifa0: serial@e6c40000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c40000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -258,7 +245,6 @@ scifa1: serial@e6c50000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c50000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -266,7 +252,6 @@ scifa2: serial@e6c60000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c60000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -274,7 +259,6 @@ scifa3: serial@e6c70000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c70000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -282,7 +266,6 @@ scifa4: serial@e6c80000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6c80000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -290,7 +273,6 @@ scifa5: serial@e6cb0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cb0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -298,7 +280,6 @@ scifa6: serial@e6cc0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cc0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -306,7 +287,6 @@ scifa7: serial@e6cd0000 { compatible = "renesas,scifa-sh73a0", "renesas,scifa"; reg = <0xe6cd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -314,7 +294,6 @@ scifb8: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -340,7 +319,6 @@ #sound-dai-cells = <1>; compatible = "renesas,sh_fsi2"; reg = <0xec230000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 146 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4d77ad690ed5..45fce2cf6fed 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -607,6 +607,17 @@ }; }; + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffc25000 0x1000>; + }; + + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 12d1c2ccaf5b..03e8268ae219 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -15,6 +15,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -29,13 +31,10 @@ dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; sysmgr@ffd08000 { diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index d532d171e391..27d551c384d0 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -37,13 +37,6 @@ */ ethernet0 = &gmac1; }; - - aliases { - /* this allow the ethaddr uboot environmnet variable contents - * to be added to the gmac1 device tree blob. - */ - ethernet0 = &gmac1; - }; }; &gmac1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index bf511828729f..28c05e7a31c9 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -16,6 +16,8 @@ */ /dts-v1/; +/* First 4KB has trampoline code for secondary cores. */ +/memreserve/ 0x00000000 0x0001000; #include "socfpga.dtsi" / { @@ -28,15 +30,12 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff702000 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 45de1514af0a..d7296a5f750c 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -68,6 +68,10 @@ }; }; +&mmc0 { + cd-gpios = <&gpio1 18 0>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 09792b411110..f9345e02ca49 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -43,13 +43,10 @@ dwmmc0@ff704000 { num-slots = <1>; - supports-highspeed; broken-cd; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; }; ethernet@ff700000 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 459cb6377764..380f914b226d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -339,12 +339,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -356,6 +366,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -451,6 +463,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,6 +504,8 @@ interrupts = <50>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -749,7 +765,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -760,7 +775,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -771,7 +785,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 24b0ad3a7c07..d73a2287b37a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -300,12 +300,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -317,6 +327,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -403,6 +415,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -564,7 +578,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; }; @@ -575,7 +588,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; }; @@ -586,7 +598,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts new file mode 100644 index 000000000000..8b3cd0907b32 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -0,0 +1,130 @@ +/* + * Copyright 2014 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "sun5i-a13.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "HSG H702"; + compatible = "hsg,h702", "allwinner,sun5i-a13"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + /* + * There doesn't seem to be a GPIO for controlling + * usb1 vbus, despite the fex file saying otherwise. + */ + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index bf86e65dd167..c4b5d7825b9f 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -298,12 +298,22 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -315,6 +325,8 @@ interrupts = <11>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -376,6 +388,8 @@ interrupts = <12>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -490,7 +504,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -501,7 +514,6 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -512,7 +524,6 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index e06fbfc55bb7..543f895d18d3 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -657,7 +693,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 6 4>; clocks = <&apb2_gates 0>; - clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; #address-cells = <1>; @@ -669,7 +704,6 @@ reg = <0x01c2b000 0x400>; interrupts = <0 7 4>; clocks = <&apb2_gates 1>; - clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; #address-cells = <1>; @@ -681,7 +715,6 @@ reg = <0x01c2b400 0x400>; interrupts = <0 8 4>; clocks = <&apb2_gates 2>; - clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; #address-cells = <1>; @@ -693,7 +726,6 @@ reg = <0x01c2b800 0x400>; interrupts = <0 9 4>; clocks = <&apb2_gates 3>; - clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; #address-cells = <1>; @@ -787,6 +819,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + nmi_intc: interrupt-controller@01f00c0c { compatible = "allwinner,sun6i-a31-sc-nmi"; interrupt-controller; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts new file mode 100644 index 000000000000..0e4bfa3b2b85 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -0,0 +1,236 @@ +/* + * Copyright 2013 Wills Wang + * + * Wills Wang <wills.wang.open@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Merrii A20 Hummingbird"; + compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_mmc3_vdd>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { + allwinner,pins = "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + uart2: serial@01c28800 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; + }; + + uart3: serial@01c28c00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; + }; + + uart4: serial@01c29000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; + }; + + uart5: serial@01c29400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + + i2c3: i2c@01c2b800 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; + }; + + spi2: spi@01c17000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_vdd>; + /* phy reset config */ + snps,reset-gpio = <&pio 0 17 0>; /* PA17 */ + snps,reset-active-low; + /* wait 1s after reset, otherwise fail to read phy id */ + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; + gpio = <&pio 7 15 0>; /* PH15 */ + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; + gpio = <&pio 7 2 0>; /* PH2 */ + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_mmc3_vdd: mmc3_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>; + regulator-name = "mmc3_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 9 0>; /* PH9 */ + }; + + reg_gmac_vdd: gmac_vdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>; + regulator-name = "gmac_vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + enable-active-high; + gpio = <&pio 7 16 0>; /* PH16 */ + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts new file mode 100644 index 000000000000..1eb8175959a6 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -0,0 +1,137 @@ +/* + * This is based on sun4i-a10-olinuxino-lime.dts + * + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> + * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Olimex A20-OLinuXino-LIME"; + compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; + + green { + label = "a20-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + + reg_ahci_5v: ahci-5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 0>; + status = "okay"; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 4011628c7381..a96b99465069 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -3,12 +3,48 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -423,12 +459,22 @@ interrupts = <0 0 4>; }; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 27 4>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <0 10 4>; clocks = <&ahb_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 27>, <&dma 1 26>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -440,6 +486,8 @@ interrupts = <0 11 4>; clocks = <&ahb_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 9>, <&dma 1 8>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -535,6 +583,8 @@ interrupts = <0 12 4>; clocks = <&ahb_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -574,6 +624,8 @@ interrupts = <0 50 4>; clocks = <&ahb_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 1 31>, <&dma 1 30>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -618,6 +670,27 @@ allwinner,pull = <0>; }; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart6_pins_a: uart6@0 { allwinner,pins = "PI12", "PI13"; allwinner,function = "uart6"; @@ -653,6 +726,13 @@ allwinner,pull = <0>; }; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -718,6 +798,13 @@ allwinner,pull = <0>; }; + spi2_pins_b: spi2@1 { + allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; allwinner,function = "mmc0"; @@ -899,7 +986,6 @@ reg = <0x01c2ac00 0x400>; interrupts = <0 7 4>; clocks = <&apb1_gates 0>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -910,7 +996,6 @@ reg = <0x01c2b000 0x400>; interrupts = <0 8 4>; clocks = <&apb1_gates 1>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -921,7 +1006,6 @@ reg = <0x01c2b400 0x400>; interrupts = <0 9 4>; clocks = <&apb1_gates 2>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -932,7 +1016,6 @@ reg = <0x01c2b800 0x400>; interrupts = <0 88 4>; clocks = <&apb1_gates 3>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -943,7 +1026,6 @@ reg = <0x01c2c000 0x400>; interrupts = <0 89 4>; clocks = <&apb1_gates 15>; - clock-frequency = <100000>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 34002e3eba9d..e9b8cca8dcc1 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun8i-a23.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "Ippo Q8H Dual Core Tablet (v5)"; @@ -23,7 +24,47 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 0>; /* PB4 */ + cd-inverted; + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; + }; + r_uart: serial@01f02800 { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 54ac0787216a..6146ef15efbe 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -3,12 +3,48 @@ * * Chen-Yu Tsai <wens@csie.org> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /include/ "skeleton.dtsi" @@ -179,6 +215,30 @@ "apb2_uart1", "apb2_uart2", "apb2_uart3", "apb2_uart4"; }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc2"; + }; }; soc@01c00000 { @@ -187,6 +247,104 @@ #size-cells = <1>; ranges; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-a23-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <0 60 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <0 61 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <0 62 4>; + status = "disabled"; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun8i-a23-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <0 11 4>, + <0 15 4>, + <0 17 4>; + clocks = <&apb1_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + ahb1_rst: reset@01c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-clock-reset"; @@ -227,6 +385,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -238,6 +398,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -249,6 +411,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -260,6 +424,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -271,9 +437,44 @@ reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 6 4>; + clocks = <&apb2_gates 0>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 7 4>; + clocks = <&apb2_gates 1>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 8 4>; + clocks = <&apb2_gates 2>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, @@ -285,6 +486,12 @@ interrupts = <1 9 0xf04>; }; + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <0 40 4>, <0 41 4>; + }; + prcm@01f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -339,5 +546,25 @@ resets = <&apb0_rst 4>; status = "disabled"; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_uart_pins_a: r_uart@0 { + allwinner,pins = "PL2", "PL3"; + allwinner,function = "s_uart"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 3d021efd1a38..c9c5b10e03eb 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -86,4 +86,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 80b8eddb4105..2ca9c1807f72 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -157,6 +157,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra114-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 624b0fba2d0a..029c9a021541 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -16,6 +16,26 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; + pcie-controller@0,01003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-supply = <&vdd_3v3_lp0>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + vddio-pex-ctl-supply = <&vdd_3v3_lp0>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + host1x@0,50000000 { hdmi@0,54280000 { status = "okay"; @@ -31,10 +51,10 @@ }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; - state_default: pinmux { + state_boot: pinmux { clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; @@ -1231,6 +1251,41 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "pe0"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "pe"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "pe1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; clk3_out_pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; @@ -1515,7 +1570,7 @@ regulator-always-on; }; - ldo0 { + avdd_1v05_run: ldo0 { regulator-name = "+1.05V_RUN_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1619,6 +1674,18 @@ nvidia,sys-clock-req-active-high; }; + /* Serial ATA */ + sata@0,70020000 { + status = "okay"; + + hvdd-supply = <&vdd_3v3_lp0>; + vddio-supply = <&vdd_1v05_run>; + avdd-supply = <&vdd_1v05_run>; + + target-5v-supply = <&vdd_5v0_sata>; + target-12v-supply = <&vdd_12v0_sata>; + }; + padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; @@ -1828,6 +1895,29 @@ enable-active-high; vin-supply = <&vdd_5v0_sys>; }; + + /* Molex power connector */ + vdd_5v0_sata: regulator@13 { + compatible = "regulator-fixed"; + reg = <13>; + regulator-name = "+5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_12v0_sata: regulator@14 { + compatible = "regulator-fixed"; + reg = <14>; + regulator-name = "+12V_SATA"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts new file mode 100644 index 000000000000..7d0784ce4c74 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -0,0 +1,1136 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + model = "Acer Chromebook 13 CB5-311"; + compatible = "google,nyan-big", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + sor@0,54540000 { + status = "okay"; + + nvidia,dpaux = <&dpaux>; + nvidia,panel = <&panel>; + }; + + dpaux@0,545c0000 { + vdd-supply = <&vdd_3v3_panel>; + status = "okay"; + }; + }; + + pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4", + "pg5", + "pg6", + "pi3"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0", + "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5", + "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5", + "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + codec_irq_l { + nvidia,pins = "ph4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_bl_en { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + touch_irq_l { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + tpm_davint_l { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_irq_l { + nvidia,pins = "pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_reset_l { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ts_shdn_l { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_ap { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lid_open { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + en_vdd_sd { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ac_ok { + nvidia,pins = "pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sensor_irq_l { + nvidia,pins = "pi6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + wifi_en { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_bl { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + en_vdd_hdmi { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + soc_warm_reset_l { + nvidia,pins = "pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hp_det_l { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + mic_det_l { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + serial@0,70006000 { + /* Debug connector on the bottom of the board near SD card. */ + status = "okay"; + }; + + pwm@0,7000a000 { + status = "okay"; + }; + + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; + }; + + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; + + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1 { + pins = "gpio1"; + function = "gpio"; + bias-pull-up; + }; + + gpio2_4_7 { + pins = "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + bias-pull-down; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.00V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + vdd_run_cam: ldo4 { + regulator-name = "+3.3V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+2.8V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@0,7000d400 { + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <3000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + power-supplies = <&charger>; + }; + }; + }; + }; + + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + hda@0,70030000 { + status = "okay"; + }; + + sdhci@0,700b0000 { /* WiFi/BT on this bus */ + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-1-8-v; + non-removable; + }; + + sdhci@0,700b0400 { /* SD Card on this bus */ + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-1-8-v; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + sdhci@0,700b0600 { /* eMMC on this bus */ + status = "okay"; + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + usb@0,7d000000 { /* Rear external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d000000 { + status = "okay"; + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb@0,7d004000 { /* Internal webcam. */ + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + vbus-supply = <&vdd_run_cam>; + }; + + usb@0,7d008000 { /* Left external USB port. */ + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_led>; + pwms = <&pwm 1 1000000>; + + default-brightness-level = <224>; + brightness-levels = + < 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255 + 256>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <5>; + linux,code = <KEY_RESERVED>; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <30>; + gpio-key,wakeup; + }; + }; + + panel: panel { + compatible = "auo,b133xtn01"; + + backlight = <&backlight>; + ddc-i2c-bus = <&dpaux>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "+VDD_LED"; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; + + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-nyan-big", + "nvidia,tegra-audio-max98090"; + nvidia,model = "Acer Chromebook 13"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "DMICL", "Int Mic", + "DMICR", "Int Mic", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 70ad91d1a20b..13008858e967 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -36,17 +36,17 @@ nvidia,panel = <&panel>; }; - dpaux: dpaux@0,545c0000 { + dpaux@0,545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; }; pinmux: pinmux@0,70000868 { - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_default>; + pinctrl-names = "boot"; + pinctrl-0 = <&pinmux_boot>; - pinmux_default: common { + pinmux_boot: common { dap_mclk1_pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; @@ -587,7 +587,7 @@ status = "okay"; }; - pwm: pwm@0,7000a000 { + pwm@0,7000a000 { status = "okay"; }; @@ -606,6 +606,14 @@ i2c@0,7000c400 { status = "okay"; clock-frequency = <100000>; + + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>; + linux,gpio-keymap = <0 0 0 BTN_LEFT>; + }; }; i2c@0,7000c500 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 03916efd6fa9..478c555ebd96 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -12,6 +12,72 @@ #address-cells = <2>; #size-cells = <2>; + pcie-controller@0,01003000 { + compatible = "nvidia,tegra124-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA124_CLK_PCIE>, + <&tegra_car TEGRA124_CLK_AFI>, + <&tegra_car TEGRA124_CLK_PLL_E>, + <&tegra_car TEGRA124_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>; + phy-names = "pcie"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + host1x@0,50000000 { compatible = "nvidia,tegra124-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; @@ -78,7 +144,7 @@ status = "disabled"; }; - dpaux@0,545c0000 { + dpaux: dpaux@0,545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -137,6 +203,11 @@ #reset-cells = <1>; }; + flow-controller@0,60007000 { + compatible = "nvidia,tegra124-flowctrl"; + reg = <0x0 0x60007000 0x0 0x1000>; + }; + gpio: gpio@0,6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -267,7 +338,7 @@ status = "disabled"; }; - pwm@0,7000a000 { + pwm: pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -480,6 +551,31 @@ reset-names = "fuse"; }; + sata@0,70020000 { + compatible = "nvidia,tegra124-ahci"; + + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ + <0x0 0x70020000 0x0 0x7000>; /* SATA */ + + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_SATA>, + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "sata", "sata-oob", "cml1", "pll_e"; + + resets = <&tegra_car 124>, + <&tegra_car 123>, + <&tegra_car 129>; + reset-names = "sata", "sata-oob", "sata-cold"; + + phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; + phy-names = "sata-phy"; + + status = "disabled"; + }; + hda@0,70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 1908f6937e53..3b374c49d04d 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -190,6 +190,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 6b35c29278d7..aa6ccea13d30 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -272,6 +272,11 @@ #reset-cells = <1>; }; + flow-controller@60007000 { + compatible = "nvidia,tegra30-flowctrl"; + reg = <0x60007000 0x1000>; + }; + apbdma: dma@6000a000 { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 756c986995a3..2efb2058ba49 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -41,7 +41,7 @@ bank-width = <4>; }; - vram@2,00000000 { + v2m_video_ram: vram@2,00000000 { compatible = "arm,vexpress-vram"; reg = <2 0x00000000 0x00800000>; }; @@ -246,9 +246,41 @@ clcd@1f0000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; }; }; @@ -350,7 +382,7 @@ /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; + freq-range = <23750000 65000000>; #clock-cells = <0>; clock-output-names = "v2m:oscclk1"; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index ba856d604fb7..cb3090f919a7 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -40,7 +40,7 @@ bank-width = <4>; }; - vram@3,00000000 { + v2m_video_ram: vram@3,00000000 { compatible = "arm,vexpress-vram"; reg = <3 0x00000000 0x00800000>; }; @@ -245,9 +245,41 @@ clcd@1f000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&smbclk>; clock-names = "clcdclk", "apb_pclk"; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; }; }; @@ -349,7 +381,7 @@ /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; + freq-range = <23750000 65000000>; #clock-cells = <0>; clock-output-names = "v2m:oscclk1"; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 62d9b225dcce..23662b5a5e9d 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -70,9 +70,40 @@ clcd@10020000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x10020000 0x1000>; + interrupt-names = "combined"; interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; }; memory-controller@100e0000 { diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts new file mode 100644 index 000000000000..7fb306679341 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -0,0 +1,46 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610-colibri.dtsi" + +/ { + model = "Toradex Colibri VF61 on Colibri Evaluation Board"; + compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dtsi index aecc7dbc65e8..0cd83434b073 100644 --- a/arch/arm/boot/dts/vf610-colibri.dts +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -7,16 +7,11 @@ * (at your option) any later version. */ -/dts-v1/; #include "vf610.dtsi" / { model = "Toradex Colibri VF61 COM"; - compatible = "toradex,vf610-colibri", "fsl,vf610"; - - chosen { - bootargs = "console=ttyLP0,115200"; - }; + compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; memory { reg = <0x80000000 0x10000000>; @@ -36,14 +31,12 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; - status = "okay"; }; &fec1 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; }; &L2 { @@ -54,25 +47,32 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; status = "okay"; }; &iomuxc { vf610-colibri { pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index e4bffbae515f..189b6975fe7d 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -220,8 +220,6 @@ VF610_PAD_PTB1__FTM0_CH1 0x1582 VF610_PAD_PTB2__FTM0_CH2 0x1582 VF610_PAD_PTB3__FTM0_CH3 0x1582 - VF610_PAD_PTB6__FTM0_CH6 0x1582 - VF610_PAD_PTB7__FTM0_CH7 0x1582 >; }; @@ -243,6 +241,13 @@ VF610_PAD_PTB5__UART1_RX 0x21a1 >; }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTB6__UART2_TX 0x21a2 + VF610_PAD_PTB7__UART2_RX 0x21a1 + >; + }; }; }; @@ -264,3 +269,19 @@ pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 583dd363c9dc..4d2ec32de96f 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -27,6 +27,8 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + usbphy0 = &usbphy0; + usbphy1 = &usbphy1; }; cpus { @@ -297,9 +299,25 @@ gpio-ranges = <&iomuxc 0 128 7>; }; - anatop@40050000 { - compatible = "fsl,vf610-anatop"; - reg = <0x40050000 0x1000>; + anatop: anatop@40050000 { + compatible = "fsl,vf610-anatop", "syscon"; + reg = <0x40050000 0x400>; + }; + + usbphy0: usbphy@40050800 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050800 0x400>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY0>; + fsl,anatop = <&anatop>; + }; + + usbphy1: usbphy@40050c00 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050c00 0x400>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBPHY1>; + fsl,anatop = <&anatop>; }; i2c0: i2c@40066000 { @@ -321,6 +339,24 @@ reg = <0x4006b000 0x1000>; #clock-cells = <1>; }; + + usbdev0: usb@40034000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x40034000 0x800>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC0>; + fsl,usbphy = <&usbphy0>; + fsl,usbmisc = <&usbmisc0 0>; + dr_mode = "peripheral"; + status = "disabled"; + }; + + usbmisc0: usb@40034800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x40034800 0x200>; + clocks = <&clks VF610_CLK_USBC0>; + }; }; aips1: aips-bus@40080000 { @@ -383,6 +419,24 @@ status = "disabled"; }; + usbh1: usb@400b4000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x400b4000 0x800>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_USBC1>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc1: usb@400b4800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x400b4800 0x200>; + clocks = <&clks VF610_CLK_USBC1>; + }; + ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 587cadcf7001..24036c440440 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -200,6 +200,8 @@ interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; gem1: ethernet@e000c000 { @@ -209,6 +211,8 @@ interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; }; sdhci0: sdhci@e0100000 { @@ -219,7 +223,7 @@ interrupt-parent = <&intc>; interrupts = <0 24 4>; reg = <0xe0100000 0x1000>; - } ; + }; sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; @@ -229,7 +233,7 @@ interrupt-parent = <&intc>; interrupts = <0 47 4>; reg = <0xe0101000 0x1000>; - } ; + }; slcr: slcr@f8000000 { #address-cells = <1>; @@ -261,6 +265,8 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0xf8003000 0x1000>; interrupt-parent = <&intc>; + interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3", + "dma4", "dma5", "dma6", "dma7"; interrupts = <0 13 4>, <0 14 4>, <0 15 4>, <0 16 4>, <0 17 4>, @@ -276,7 +282,7 @@ devcfg: devcfg@f8007000 { compatible = "xlnx,zynq-devcfg-1.0"; reg = <0xf8007000 0x100>; - } ; + }; global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; @@ -308,6 +314,6 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; - } ; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 41afd9da6876..e1f51ca127fe 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -25,7 +25,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -38,8 +38,6 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; - #address-cells = <1>; - #size-cells = <0>; ethernet_phy: ethernet-phy@0 { /* Marvell 88E1318 */ @@ -53,6 +51,29 @@ &i2c0 { status = "okay"; + + isl9305: isl9305@68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + dcd2 { + regulator-name = "1P35V"; + regulator-always-on; + }; + ldo1 { + regulator-name = "VDD_ADJ"; + }; + ldo2 { + regulator-name = "VDD_GPIO"; + regulator-always-on; + }; + }; + }; }; &sdhci1 { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 835c3089c61c..94e2cda6f9b6 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. * * This software is licensed under the terms of the GNU General Public @@ -27,6 +27,15 @@ bootargs = "console=ttyPS0,115200 earlyprintk"; }; + leds { + compatible = "gpio-leds"; + + ds23 { + label = "ds23"; + gpios = <&gpio0 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; }; &can0 { @@ -35,7 +44,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 4cc9913078cd..a8bbdfbc7093 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -21,7 +20,7 @@ memory { device_type = "memory"; - reg = <0 0x40000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 82d7ef1a9a9c..697779a353ed 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -1,7 +1,6 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * Copyright (C) 2013 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -17,11 +16,11 @@ / { model = "Zynq Zed Development Board"; - compatible = "xlnx,zynq-7000"; + compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; memory { device_type = "memory"; - reg = <0 0x20000000>; + reg = <0x0 0x20000000>; }; chosen { @@ -32,7 +31,12 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; }; &sdhci0 { diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 4cc84e8a3289..6a064e53f4d6 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -35,30 +35,8 @@ static void __init sama5_dt_timer_init(void) at91sam926x_pit_init(); } -static int ksz9021rn_phy_fixup(struct phy_device *phy) -{ - int value; - - /* Set delay values */ - value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0xF2F4; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000; - phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value); - value = 0x2222; - phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value); - - return 0; -} - static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d3xcm") && - IS_ENABLED(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index ed1928740b5f..f703d82f08a8 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -46,6 +46,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1", NULL), + OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL), {} }; diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0b311d51425f..69166eed5dba 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -241,6 +241,8 @@ MACHINE_END #ifdef CONFIG_SOC_DRA7XX static const char *const dra74x_boards_compat[] __initconst = { + "ti,am5728", + "ti,am5726", "ti,dra742", "ti,dra7", NULL, @@ -260,6 +262,8 @@ DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") MACHINE_END static const char *const dra72x_boards_compat[] __initconst = { + "ti,am5718", + "ti,am5716", "ti,dra722", NULL, }; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 0a5e6e053b8c..c8ac72604207 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -252,6 +252,14 @@ static void __init nokia_n900_legacy_init(void) platform_device_register(&omap3_rom_rng_device); } + + /* Only on some development boards */ + gpio_request_one(164, GPIOF_OUT_INIT_LOW, "smc91x reset"); +} + +static void __init omap3_tao3530_legacy_init(void) +{ + hsmmc2_internal_input_clk(); } #endif /* CONFIG_ARCH_OMAP3 */ @@ -387,6 +395,7 @@ static struct pdata_init pdata_quirks[] __initdata = { { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, + { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, #endif #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, }, diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index c437a9941726..6d8bbf7d39d8 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -18,6 +18,8 @@ static const char * const qcom_dt_match[] __initconst = { "qcom,apq8064", "qcom,apq8074-dragonboard", "qcom,apq8084", + "qcom,ipq8062", + "qcom,ipq8064", "qcom,msm8660-surf", "qcom,msm8960-cdp", NULL diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index d1686696ca41..ac5803cac98d 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -4,6 +4,7 @@ config ARCH_ROCKCHIP select PINCTRL_ROCKCHIP select ARCH_HAS_RESET_CONTROLLER select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA select ARM_GIC select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER diff --git a/drivers/mfd/da9055-core.c b/drivers/mfd/da9055-core.c index caf8dcffd0ad..b4d920c1ead1 100644 --- a/drivers/mfd/da9055-core.c +++ b/drivers/mfd/da9055-core.c @@ -296,73 +296,73 @@ static struct resource da9055_ld05_6_resource = { static const struct mfd_cell da9055_devs[] = { { - .of_compatible = "dialog,da9055-gpio", + .of_compatible = "dlg,da9055-gpio", .name = "da9055-gpio", }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .id = 1, }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .id = 2, }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .id = 3, }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .id = 4, }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .id = 5, }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .id = 6, }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .id = 7, .resources = &da9055_ld05_6_resource, .num_resources = 1, }, { - .of_compatible = "dialog,da9055-regulator", + .of_compatible = "dlg,da9055-regulator", .name = "da9055-regulator", .resources = &da9055_ld05_6_resource, .num_resources = 1, .id = 8, }, { - .of_compatible = "dialog,da9055-onkey", + .of_compatible = "dlg,da9055-onkey", .name = "da9055-onkey", .resources = &da9055_onkey_resource, .num_resources = 1, }, { - .of_compatible = "dialog,da9055-rtc", + .of_compatible = "dlg,da9055-rtc", .name = "da9055-rtc", .resources = da9055_rtc_resource, .num_resources = ARRAY_SIZE(da9055_rtc_resource), }, { - .of_compatible = "dialog,da9055-hwmon", + .of_compatible = "dlg,da9055-hwmon", .name = "da9055-hwmon", .resources = &da9055_hwmon_resource, .num_resources = 1, }, { - .of_compatible = "dialog,da9055-watchdog", + .of_compatible = "dlg,da9055-watchdog", .name = "da9055-watchdog", }, }; diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index f929a79e6998..8ea7ab0346ad 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -26,6 +26,7 @@ #define R8A7790_CLK_MSIOF0 0 /* MSTP1 */ +#define R8A7790_CLK_JPU 6 #define R8A7790_CLK_TMU1 11 #define R8A7790_CLK_TMU3 21 #define R8A7790_CLK_TMU2 22 diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index f0d4d1049162..58c3f49d068c 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -25,6 +25,7 @@ #define R8A7791_CLK_MSIOF0 0 /* MSTP1 */ +#define R8A7791_CLK_JPU 6 #define R8A7791_CLK_TMU1 11 #define R8A7791_CLK_TMU3 21 #define R8A7791_CLK_TMU2 22 diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h new file mode 100644 index 000000000000..9ac1043e25bc --- /dev/null +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright 2013 Ideas On Board SPRL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_R8A7794_H__ +#define __DT_BINDINGS_CLOCK_R8A7794_H__ + +/* CPG */ +#define R8A7794_CLK_MAIN 0 +#define R8A7794_CLK_PLL0 1 +#define R8A7794_CLK_PLL1 2 +#define R8A7794_CLK_PLL3 3 +#define R8A7794_CLK_LB 4 +#define R8A7794_CLK_QSPI 5 +#define R8A7794_CLK_SDH 6 +#define R8A7794_CLK_SD0 7 +#define R8A7794_CLK_Z 8 + +/* MSTP0 */ +#define R8A7794_CLK_MSIOF0 0 + +/* MSTP1 */ +#define R8A7794_CLK_TMU1 11 +#define R8A7794_CLK_TMU3 21 +#define R8A7794_CLK_TMU2 22 +#define R8A7794_CLK_CMT0 24 +#define R8A7794_CLK_TMU0 25 + +/* MSTP2 */ +#define R8A7794_CLK_SCIFA2 2 +#define R8A7794_CLK_SCIFA1 3 +#define R8A7794_CLK_SCIFA0 4 +#define R8A7794_CLK_MSIOF2 5 +#define R8A7794_CLK_SCIFB0 6 +#define R8A7794_CLK_SCIFB1 7 +#define R8A7794_CLK_MSIOF1 8 +#define R8A7794_CLK_SCIFB2 16 + +/* MSTP3 */ +#define R8A7794_CLK_CMT1 29 + +/* MSTP5 */ +#define R8A7794_CLK_THERMAL 22 +#define R8A7794_CLK_PWM 23 + +/* MSTP7 */ +#define R8A7794_CLK_HSCIF2 13 +#define R8A7794_CLK_SCIF5 14 +#define R8A7794_CLK_SCIF4 15 +#define R8A7794_CLK_HSCIF1 16 +#define R8A7794_CLK_HSCIF0 17 +#define R8A7794_CLK_SCIF3 18 +#define R8A7794_CLK_SCIF2 19 +#define R8A7794_CLK_SCIF1 20 +#define R8A7794_CLK_SCIF0 21 + +/* MSTP8 */ +#define R8A7794_CLK_ETHER 13 + +/* MSTP9 */ +#define R8A7794_CLK_GPIO6 5 +#define R8A7794_CLK_GPIO5 7 +#define R8A7794_CLK_GPIO4 8 +#define R8A7794_CLK_GPIO3 9 +#define R8A7794_CLK_GPIO2 10 +#define R8A7794_CLK_GPIO1 11 +#define R8A7794_CLK_GPIO0 12 + +/* MSTP11 */ +#define R8A7794_CLK_SCIFA3 6 +#define R8A7794_CLK_SCIFA4 7 +#define R8A7794_CLK_SCIFA5 8 + +#endif /* __DT_BINDINGS_CLOCK_R8A7794_H__ */ |