summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/sh/Kconfig.debug15
-rw-r--r--arch/sh/Makefile1
-rw-r--r--arch/sh/boards/se/7751/setup.c148
-rw-r--r--arch/sh/kernel/kgdb_stub.c106
-rw-r--r--arch/sh/kernel/setup.c94
-rw-r--r--drivers/serial/sh-sci.c53
-rw-r--r--include/asm-sh/kgdb.h51
-rw-r--r--include/asm-sh/se7751.h2
8 files changed, 101 insertions, 369 deletions
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 87902e0298e2..6be2385c1ad2 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -77,16 +77,17 @@ config 4KSTACKS
on the VM subsystem for higher order allocations. This option
will also use IRQ stacks to compensate for the reduced stackspace.
-config KGDB
+config SH_KGDB
bool "Include KGDB kernel debugger"
select FRAME_POINTER
+ select DEBUG_INFO
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
Unless you are intending to debug the kernel, say N here.
menu "KGDB configuration options"
- depends on KGDB
+ depends on SH_KGDB
config MORE_COMPILE_OPTIONS
bool "Add any additional compile options"
@@ -109,16 +110,14 @@ config KGDB_THREAD
config SH_KGDB_CONSOLE
bool "Console messages through GDB"
+ depends on !SERIAL_SH_SCI_CONSOLE
+ select SERIAL_CORE_CONSOLE
default n
config KGDB_SYSRQ
bool "Allow SysRq 'G' to enter KGDB"
default y
-config KGDB_KERNEL_ASSERTS
- bool "Include KGDB kernel assertions"
- default n
-
comment "Serial port setup"
config KGDB_DEFPORT
@@ -131,7 +130,7 @@ config KGDB_DEFBAUD
choice
prompt "Parity"
- depends on KGDB
+ depends on SH_KGDB
default KGDB_DEFPARITY_N
config KGDB_DEFPARITY_N
@@ -147,7 +146,7 @@ endchoice
choice
prompt "Data bits"
- depends on KGDB
+ depends on SH_KGDB
default KGDB_DEFBITS_8
config KGDB_DEFBITS_8
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index bd9b1729f8b8..0fadde283368 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -47,7 +47,6 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
cflags-$(CONFIG_SH_DSP) += -Wa,-dsp
-cflags-$(CONFIG_SH_KGDB) += -g
cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index e3feae6ec0bf..770defed9c4a 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -14,153 +14,6 @@
#include <asm/se7751.h>
#include <asm/io.h>
-void init_7751se_IRQ(void);
-
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_uart_setup(void);
-static struct kgdb_sermap kgdb_uart_sermap =
-{ "ttyS", 0, kgdb_uart_setup, NULL };
-#endif
-
-/*
- * Initialize the board
- */
-static void __init sh7751se_setup(char **cmdline_p)
-{
- /* Call init_smsc() replacement to set up SuperIO. */
- /* XXX: RTC setting comes here */
-#ifdef CONFIG_SH_KGDB
- kgdb_register_sermap(&kgdb_uart_sermap);
-#endif
-}
-
-/*********************************************************************
- * Currently a hack (e.g. does not interact well w/serial.c, lots of *
- * hardcoded stuff) but may be useful if SCI/F needs debugging. *
- * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and *
- * arch/i386/lib/kgdb_serial.c). *
- *********************************************************************/
-
-#ifdef CONFIG_SH_KGDB
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#define COM1_PORT 0x3f8 /* Base I/O address */
-#define COM1_IRQ 4 /* IRQ not used yet */
-#define COM2_PORT 0x2f8 /* Base I/O address */
-#define COM2_IRQ 3 /* IRQ not used yet */
-
-#define SB_CLOCK 1843200 /* Serial baud clock */
-#define SB_BASE (SB_CLOCK/16)
-#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
-
-struct uart_port {
- int base;
-};
-#define UART_NPORTS 2
-struct uart_port uart_ports[] = {
- { COM1_PORT },
- { COM2_PORT },
-};
-struct uart_port *kgdb_uart_port;
-
-#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg)
-#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg)
-
-/* Basic read/write functions for the UART */
-#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE)
-static int kgdb_uart_getchar(void)
-{
- int lsr;
- int c = -1;
-
- while (c == -1) {
- lsr = UART_IN(UART_LSR);
- if (lsr & UART_LSR_DR)
- c = UART_IN(UART_RX);
- if ((lsr & UART_LSR_RXCERR))
- c = -1;
- }
- return c;
-}
-
-static void kgdb_uart_putchar(int c)
-{
- while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0)
- ;
- UART_OUT(UART_TX, c);
-}
-
-/*
- * Initialize UART to configured/requested values.
- * (But we don't interrupts yet, or interact w/serial.c)
- */
-static int kgdb_uart_setup(void)
-{
- int port;
- int lcr = 0;
- int bdiv = 0;
-
- if (kgdb_portnum >= UART_NPORTS) {
- KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum);
- return -1;
- }
-
- kgdb_uart_port = &uart_ports[kgdb_portnum];
-
- /* Init sequence from gdb_hook_interrupt */
- UART_IN(UART_RX);
- UART_OUT(UART_IER, 0);
-
- UART_IN(UART_RX); /* Serial driver comments say */
- UART_IN(UART_IIR); /* this clears interrupt regs */
- UART_IN(UART_MSR);
-
- /* Figure basic LCR values */
- switch (kgdb_bits) {
- case '7':
- lcr |= UART_LCR_WLEN7;
- break;
- default: case '8':
- lcr |= UART_LCR_WLEN8;
- break;
- }
- switch (kgdb_parity) {
- case 'O':
- lcr |= UART_LCR_PARITY;
- break;
- case 'E':
- lcr |= (UART_LCR_PARITY | UART_LCR_EPAR);
- break;
- default: break;
- }
-
- /* Figure the baud rate divisor */
- bdiv = (SB_BASE/kgdb_baud);
-
- /* Set the baud rate and LCR values */
- UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB));
- UART_OUT(UART_DLL, (bdiv & 0xff));
- UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff));
- UART_OUT(UART_LCR, lcr);
-
- /* Set the MCR */
- UART_OUT(UART_MCR, SB_MCR);
-
- /* Turn off FIFOs for now */
- UART_OUT(UART_FCR, 0);
-
- /* Setup complete: initialize function pointers */
- kgdb_getchar = kgdb_uart_getchar;
- kgdb_putchar = kgdb_uart_putchar;
-
- return 0;
-}
-#endif /* CONFIG_SH_KGDB */
-
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
@@ -197,7 +50,6 @@ __initcall(se7751_devices_setup);
*/
struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
- .mv_setup = sh7751se_setup,
.mv_nr_irqs = 72,
.mv_inb = sh7751se_inb,
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d8927d85492e..737eadc8ce0f 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -6,11 +6,11 @@
* David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>,
* Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>,
* Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>.
- *
+ *
* This version by Henry Bell <henry.bell@st.com>
* Minor modifications by Jeremy Siegel <jsiegel@mvista.com>
- *
- * Contains low-level support for remote debug using GDB.
+ *
+ * Contains low-level support for remote debug using GDB.
*
* To enable debugger support, two things need to happen. A call to
* set_debug_traps() is necessary in order to allow any breakpoints
@@ -48,7 +48,7 @@
* k kill (Detach GDB)
*
* d Toggle debug flag
- * D Detach GDB
+ * D Detach GDB
*
* Hct Set thread t for operations, OK or ENN
* c = 'c' (step, cont), c = 'g' (other
@@ -58,7 +58,7 @@
* qfThreadInfo Get list of current threads (first) m<id>
* qsThreadInfo " " " " " (subsequent)
* qOffsets Get section offsets Text=x;Data=y;Bss=z
- *
+ *
* TXX Find if thread XX is alive OK or ENN
* ? What was the last sigval ? SNN (signal NN)
* O Output to GDB console
@@ -74,7 +74,7 @@
* '$' or '#'. If <data> starts with two characters followed by
* ':', then the existing stubs interpret this as a sequence number.
*
- * CSUM1 and CSUM2 are ascii hex representation of an 8-bit
+ * CSUM1 and CSUM2 are ascii hex representation of an 8-bit
* checksum of <data>, the most significant nibble is sent first.
* the hex digits 0-9,a-f are used.
*
@@ -86,8 +86,8 @@
* Responses can be run-length encoded to save space. A '*' means that
* the next character is an ASCII encoding giving a repeat count which
* stands for that many repititions of the character preceding the '*'.
- * The encoding is n+29, yielding a printable character where n >=3
- * (which is where RLE starts to win). Don't use an n > 126.
+ * The encoding is n+29, yielding a printable character where n >=3
+ * (which is where RLE starts to win). Don't use an n > 126.
*
* So "0* " means the same as "0000".
*/
@@ -100,12 +100,10 @@
#include <linux/delay.h>
#include <linux/linkage.h>
#include <linux/init.h>
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
#include <linux/console.h>
-#endif
-
+#include <linux/sysrq.h>
#include <asm/system.h>
+#include <asm/cacheflush.h>
#include <asm/current.h>
#include <asm/signal.h>
#include <asm/pgtable.h>
@@ -153,7 +151,6 @@ char kgdb_in_gdb_mode;
char in_nmi; /* Set during NMI to prevent reentry */
int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */
int kgdb_enabled = 1; /* Default to enabled, cmdline can disable */
-int kgdb_halt;
/* Exposed for user access */
struct task_struct *kgdb_current;
@@ -328,7 +325,7 @@ static int hex_to_int(char **ptr, int *int_value)
}
/* Copy the binary array pointed to by buf into mem. Fix $, #,
- and 0x7d escaped with 0x7d. Return a pointer to the character
+ and 0x7d escaped with 0x7d. Return a pointer to the character
after the last byte written. */
static char *ebin_to_mem(const char *buf, char *mem, int count)
{
@@ -452,7 +449,7 @@ static void get_packet(char *buffer, int buflen)
/* Ack successful transfer */
put_debug_char('+');
- /* If a sequence char is present, reply
+ /* If a sequence char is present, reply
the sequence ID */
if (buffer[2] == ':') {
put_debug_char(buffer[0]);
@@ -759,7 +756,7 @@ static short *get_step_address(void)
return (short *) addr;
}
-/* Set up a single-step. Replace the instruction immediately after the
+/* Set up a single-step. Replace the instruction immediately after the
current instruction (i.e. next in the expected flow of control) with a
trap instruction, so that returning will cause only a single instruction
to be executed. Note that this model is slightly broken for instructions
@@ -1002,10 +999,8 @@ void set_thread_msg(void)
char *ptr;
switch (in_buffer[1]) {
-
- /* To select which thread for gG etc messages, i.e. supported */
+ /* To select which thread for gG etc messages, i.e. supported */
case 'g':
-
ptr = &in_buffer[2];
hex_to_int(&ptr, &threadid);
thread = get_thread(threadid);
@@ -1173,6 +1168,7 @@ static void query_msg(void)
}
#endif /* CONFIG_KGDB_THREAD */
+#ifdef CONFIG_SH_KGDB_CONSOLE
/*
* Bring up the ports..
*/
@@ -1185,6 +1181,9 @@ static int kgdb_serial_setup(void)
return 0;
}
+#else
+#define kgdb_serial_setup() 0
+#endif
/* The command loop, read and act on requests */
static void kgdb_command_loop(const int excep_code, const int trapa_value)
@@ -1193,7 +1192,7 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
if (excep_code == NMI_VEC) {
#ifndef CONFIG_KGDB_NMI
- KGDB_PRINTK("Ignoring unexpected NMI?\n");
+ printk(KERN_NOTICE "KGDB: Ignoring unexpected NMI?\n");
return;
#else /* CONFIG_KGDB_NMI */
if (!kgdb_enabled) {
@@ -1216,10 +1215,7 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
/* Enter GDB mode (e.g. after detach) */
if (!kgdb_in_gdb_mode) {
/* Do serial setup, notify user, issue preemptive ack */
- kgdb_serial_setup();
- KGDB_PRINTK("Waiting for GDB (on %s%d at %d baud)\n",
- (kgdb_porttype ? kgdb_porttype->name : ""),
- kgdb_portnum, kgdb_baud);
+ printk(KERN_NOTICE "KGDB: Waiting for GDB\n");
kgdb_in_gdb_mode = 1;
put_debug_char('+');
}
@@ -1233,21 +1229,18 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
will later be replaced by its original one. Do NOT do this for
trap 0xff, since that indicates a compiled-in breakpoint which
will not be replaced (and we would retake the trap forever) */
- if ((excep_code == TRAP_VEC) && (trapa_value != (0xff << 2))) {
+ if ((excep_code == TRAP_VEC) && (trapa_value != (0x3c << 2)))
trap_registers.pc -= 2;
- }
/* Undo any stepping we may have done */
undo_single_step();
while (1) {
-
out_buffer[0] = 0;
get_packet(in_buffer, BUFMAX);
/* Examine first char of buffer to see what we need to do */
switch (in_buffer[0]) {
-
case '?': /* Send which signal we've received */
send_signal_msg(sigval);
break;
@@ -1323,11 +1316,8 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value)
}
/* There has been an exception, most likely a breakpoint. */
-asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7,
- struct pt_regs __regs)
+static void handle_exception(struct pt_regs *regs)
{
- struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
int excep_code, vbr_val;
int count;
int trapa_value = ctrl_inl(TRA);
@@ -1355,7 +1345,7 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
kgdb_trapa_val = trapa_value;
/* Act on the exception */
- kgdb_command_loop(excep_code >> 5, trapa_value);
+ kgdb_command_loop(excep_code, trapa_value);
kgdb_current = NULL;
@@ -1373,14 +1363,12 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
asm("ldc %0, vbr": :"r"(vbr_val));
}
-/* Trigger a breakpoint by function */
-void breakpoint(void)
+asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7,
+ struct pt_regs __regs)
{
- if (!kgdb_enabled) {
- kgdb_enabled = 1;
- kgdb_init();
- }
- BREAKPOINT();
+ struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+ handle_exception(regs);
}
/* Initialise the KGDB data structures and serial configuration */
@@ -1395,24 +1383,16 @@ int kgdb_init(void)
kgdb_in_gdb_mode = 0;
if (kgdb_serial_setup() != 0) {
- KGDB_PRINTK("serial setup error\n");
+ printk(KERN_NOTICE "KGDB: serial setup error\n");
return -1;
}
/* Init ptr to exception handler */
- kgdb_debug_hook = kgdb_handle_exception;
+ kgdb_debug_hook = handle_exception;
kgdb_bus_err_hook = kgdb_handle_bus_error;
/* Enter kgdb now if requested, or just report init done */
- if (kgdb_halt) {
- kgdb_in_gdb_mode = 1;
- put_debug_char('+');
- breakpoint();
- }
- else
- {
- KGDB_PRINTK("stub is initialized.\n");
- }
+ printk(KERN_NOTICE "KGDB: stub is initialized.\n");
return 0;
}
@@ -1437,7 +1417,7 @@ static void kgdb_msg_write(const char *s, unsigned count)
/* Calculate how many this time */
wcount = (count > MAXOUT) ? MAXOUT : count;
-
+
/* Pack in hex chars */
for (i = 0; i < wcount; i++)
bufptr = pack_hex_byte(bufptr, s[i]);
@@ -1467,3 +1447,25 @@ void kgdb_console_write(struct console *co, const char *s, unsigned count)
kgdb_msg_write(s, count);
}
#endif
+
+#ifdef CONFIG_KGDB_SYSRQ
+static void sysrq_handle_gdb(int key, struct tty_struct *tty)
+{
+ printk("Entering GDB stub\n");
+ breakpoint();
+}
+
+static struct sysrq_key_op sysrq_gdb_op = {
+ .handler = sysrq_handle_gdb,
+ .help_msg = "Gdb",
+ .action_msg = "GDB",
+};
+
+static int gdb_register_sysrq(void)
+{
+ printk("Registering GDB sysrq handler\n");
+ register_sysrq_key('g', &sysrq_gdb_op);
+ return 0;
+}
+module_init(gdb_register_sysrq);
+#endif
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 98802ab28211..f96490419768 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -25,11 +25,8 @@
#include <asm/setup.h>
#include <asm/clock.h>
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_parse_options(char *options);
-#endif
extern void * __rd_start, * __rd_end;
+
/*
* Machine setup..
*/
@@ -499,92 +496,3 @@ struct seq_operations cpuinfo_op = {
.show = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */
-
-#ifdef CONFIG_SH_KGDB
-/*
- * Parse command-line kgdb options. By default KGDB is enabled,
- * entered on error (or other action) using default serial info.
- * The command-line option can include a serial port specification
- * and an action to override default or configured behavior.
- */
-struct kgdb_sermap kgdb_sci_sermap =
-{ "ttySC", 5, kgdb_sci_setup, NULL };
-
-struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap;
-struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap;
-
-void kgdb_register_sermap(struct kgdb_sermap *map)
-{
- struct kgdb_sermap *last;
-
- for (last = kgdb_serlist; last->next; last = last->next)
- ;
- last->next = map;
- if (!map->namelen) {
- map->namelen = strlen(map->name);
- }
-}
-
-static int __init kgdb_parse_options(char *options)
-{
- char c;
- int baud;
-
- /* Check for port spec (or use default) */
-
- /* Determine port type and instance */
- if (!memcmp(options, "tty", 3)) {
- struct kgdb_sermap *map = kgdb_serlist;
-
- while (map && memcmp(options, map->name, map->namelen))
- map = map->next;
-
- if (!map) {
- KGDB_PRINTK("unknown port spec in %s\n", options);
- return -1;
- }
-
- kgdb_porttype = map;
- kgdb_serial_setup = map->setup_fn;
- kgdb_portnum = options[map->namelen] - '0';
- options += map->namelen + 1;
-
- options = (*options == ',') ? options+1 : options;
-
- /* Read optional parameters (baud/parity/bits) */
- baud = simple_strtoul(options, &options, 10);
- if (baud != 0) {
- kgdb_baud = baud;
-
- c = toupper(*options);
- if (c == 'E' || c == 'O' || c == 'N') {
- kgdb_parity = c;
- options++;
- }
-
- c = *options;
- if (c == '7' || c == '8') {
- kgdb_bits = c;
- options++;
- }
- options = (*options == ',') ? options+1 : options;
- }
- }
-
- /* Check for action specification */
- if (!memcmp(options, "halt", 4)) {
- kgdb_halt = 1;
- options += 4;
- } else if (!memcmp(options, "disabled", 8)) {
- kgdb_enabled = 0;
- options += 8;
- }
-
- if (*options) {
- KGDB_PRINTK("ignored unknown options: %s\n", options);
- return 0;
- }
- return 1;
-}
-__setup("kgdb=", kgdb_parse_options);
-#endif /* CONFIG_SH_KGDB */
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 46c40bbc4bc6..4b17f845f5cd 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -46,6 +46,7 @@
#endif
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <linux/ctype.h>
#include <asm/clock.h>
#include <asm/sh_bios.h>
#include <asm/kgdb.h>
@@ -163,7 +164,7 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count)
usegdb |= sh_bios_in_gdb_mode();
#endif
#ifdef CONFIG_SH_KGDB
- usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port));
+ usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
#endif
if (usegdb) {
@@ -204,7 +205,7 @@ static int kgdb_sci_getchar(void)
int c;
/* Keep trying to read a character, this could be neater */
- while ((c = get_char(kgdb_sci_port)) < 0)
+ while ((c = get_char(&kgdb_sci_port->port)) < 0)
cpu_relax();
return c;
@@ -212,7 +213,7 @@ static int kgdb_sci_getchar(void)
static inline void kgdb_sci_putchar(int c)
{
- put_char(kgdb_sci_port, c);
+ put_char(&kgdb_sci_port->port, c);
}
#endif /* CONFIG_SH_KGDB */
@@ -738,7 +739,7 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
#ifdef CONFIG_SH_KGDB
/* Break into the debugger if a break is detected */
- BREAKPOINT();
+ breakpoint();
#endif
sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
@@ -971,7 +972,6 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
- unsigned long flags;
int t;
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
@@ -989,12 +989,10 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
#else
t = SCBRR_VALUE(baud);
#endif
- }
break;
+ }
}
- spin_lock_irqsave(&port->lock, flags);
-
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TEND(port)));
@@ -1038,8 +1036,6 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
if ((termios->c_cflag & CREAD) != 0)
sci_start_rx(port,0);
-
- spin_unlock_irqrestore(&port->lock, flags);
}
static const char *sci_type(struct uart_port *port)
@@ -1220,8 +1216,6 @@ static int __init serial_console_setup(struct console *co, char *options)
if (!port->membase || !port->mapbase)
return -ENODEV;
- spin_lock_init(&port->lock);
-
port->type = serial_console_port->type;
if (port->flags & UPF_IOREMAP)
@@ -1247,7 +1241,7 @@ static struct console serial_console = {
.device = uart_console_device,
.write = serial_console_write,
.setup = serial_console_setup,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER,
.index = -1,
.data = &sci_uart_driver,
};
@@ -1292,11 +1286,23 @@ int __init kgdb_console_setup(struct console *co, char *options)
int parity = 'n';
int flow = 'n';
- spin_lock_init(&port->lock);
-
if (co->index != kgdb_portnum)
co->index = kgdb_portnum;
+ kgdb_sci_port = &sci_ports[co->index];
+ port = &kgdb_sci_port->port;
+
+ /*
+ * Also need to check port->type, we don't actually have any
+ * UPIO_PORT ports, but uart_report_port() handily misreports
+ * it anyways if we don't have a port available by the time this is
+ * called.
+ */
+ if (!port->type)
+ return -ENODEV;
+ if (!port->membase || !port->mapbase)
+ return -ENODEV;
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
@@ -1311,11 +1317,12 @@ int __init kgdb_console_setup(struct console *co, char *options)
#ifdef CONFIG_SH_KGDB_CONSOLE
static struct console kgdb_console = {
- .name = "ttySC",
- .write = kgdb_console_write,
- .setup = kgdb_console_setup,
- .flags = CON_PRINTBUFFER | CON_ENABLED,
- .index = -1,
+ .name = "ttySC",
+ .device = uart_console_device,
+ .write = kgdb_console_write,
+ .setup = kgdb_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
.data = &sci_uart_driver,
};
@@ -1386,6 +1393,12 @@ static int __devinit sci_probe(struct platform_device *dev)
uart_add_one_port(&sci_uart_driver, &sciport->port);
}
+#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
+ kgdb_sci_port = &sci_ports[kgdb_portnum];
+ kgdb_getchar = kgdb_sci_getchar;
+ kgdb_putchar = kgdb_sci_putchar;
+#endif
+
#ifdef CONFIG_CPU_FREQ
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
dev_info(&dev->dev, "sci: CPU frequency notifier registered\n");
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
index 0095c665d272..74bd0953e5ce 100644
--- a/include/asm-sh/kgdb.h
+++ b/include/asm-sh/kgdb.h
@@ -17,6 +17,7 @@
#define __KGDB_H
#include <asm/ptrace.h>
+#include <asm/cacheflush.h>
struct console;
@@ -45,35 +46,21 @@ extern int kgdb_portnum;
extern int kgdb_baud;
extern char kgdb_parity;
extern char kgdb_bits;
-extern int kgdb_console_setup(struct console *, char *);
/* Init and interface stuff */
extern int kgdb_init(void);
-extern int (*kgdb_serial_setup)(void);
extern int (*kgdb_getchar)(void);
extern void (*kgdb_putchar)(int);
-struct kgdb_sermap {
- char *name;
- int namelen;
- int (*setup_fn)(struct console *, char *);
- struct kgdb_sermap *next;
-};
-extern void kgdb_register_sermap(struct kgdb_sermap *map);
-extern struct kgdb_sermap *kgdb_porttype;
-
/* Trap functions */
-typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
+typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
typedef void (kgdb_bus_error_hook_t)(void);
extern kgdb_debug_hook_t *kgdb_debug_hook;
extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
-extern void breakpoint(void);
-
/* Console */
-struct console;
void kgdb_console_write(struct console *co, const char *s, unsigned count);
-void kgdb_console_init(void);
+extern int kgdb_console_setup(struct console *, char *);
/* Prototypes for jmp fns */
#define _JBLEN 9
@@ -81,11 +68,8 @@ typedef int jmp_buf[_JBLEN];
extern void longjmp(jmp_buf __jmpb, int __retval);
extern int setjmp(jmp_buf __jmpb);
-/* Variadic macro to print our own message to the console */
-#define KGDB_PRINTK(...) printk("KGDB: " __VA_ARGS__)
-
/* Forced breakpoint */
-#define BREAKPOINT() \
+#define breakpoint() \
do { \
if (kgdb_enabled) \
__asm__ __volatile__("trapa #0x3c"); \
@@ -95,7 +79,6 @@ do { \
#if defined(CONFIG_CPU_SH4)
#define kgdb_flush_icache_range(start, end) \
{ \
- extern void __flush_purge_region(void *, int); \
__flush_purge_region((void*)(start), (int)(end) - (int)(start));\
flush_icache_range((start), (end)); \
}
@@ -103,31 +86,6 @@ do { \
#define kgdb_flush_icache_range(start, end) do { } while (0)
#endif
-/* Kernel assert macros */
-#ifdef CONFIG_KGDB_KERNEL_ASSERTS
-
-/* Predefined conditions */
-#define KA_VALID_ERRNO(errno) ((errno) > 0 && (errno) <= EMEDIUMTYPE)
-#define KA_VALID_PTR_ERR(ptr) KA_VALID_ERRNO(-PTR_ERR(ptr))
-#define KA_VALID_KPTR(ptr) (!(ptr) || \
- ((void *)(ptr) >= (void *)PAGE_OFFSET && \
- (void *)(ptr) < ERR_PTR(-EMEDIUMTYPE)))
-#define KA_VALID_PTRORERR(errptr) \
- (KA_VALID_KPTR(errptr) || KA_VALID_PTR_ERR(errptr))
-#define KA_HELD_GKL() (current->lock_depth >= 0)
-
-/* The actual assert */
-#define KGDB_ASSERT(condition, message) do { \
- if (!(condition) && (kgdb_enabled)) { \
- KGDB_PRINTK("Assertion failed at %s:%d: %s\n", \
- __FILE__, __LINE__, message);\
- BREAKPOINT(); \
- } \
-} while (0)
-#else
-#define KGDB_ASSERT(condition, message)
-#endif
-
/* Taken from sh-stub.c of GDB 4.18 */
static const char hexchars[] = "0123456789abcdef";
@@ -142,5 +100,4 @@ static inline char lowhex(const int x)
{
return hexchars[x & 0xf];
}
-
#endif
diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h
index 88cd379d9084..02ca9347f043 100644
--- a/include/asm-sh/se7751.h
+++ b/include/asm-sh/se7751.h
@@ -65,6 +65,8 @@
#define IRQ_79C973 13
+void init_7751se_IRQ(void);
+
#define __IO_PREFIX sh7751se
#include <asm/io_generic.h>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 22:16:52 +0100