diff options
| -rw-r--r-- | Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt | 42 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/timer/csky,mptimer.txt | 42 | ||||
| -rw-r--r-- | drivers/clocksource/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 2 | ||||
| -rw-r--r-- | drivers/clocksource/timer-gx6605s.c | 154 | ||||
| -rw-r--r-- | drivers/clocksource/timer-mp-csky.c | 173 | ||||
| -rw-r--r-- | include/linux/cpuhotplug.h | 1 |
7 files changed, 432 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt b/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt new file mode 100644 index 000000000000..6b04344f4bea --- /dev/null +++ b/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt @@ -0,0 +1,42 @@ +================= +gx6605s SOC Timer +================= + +The timer is used in gx6605s soc as system timer and the driver +contain clk event and clk source. + +============================== +timer node bindings definition +============================== + + Description: Describes gx6605s SOC timer + + PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: must be "csky,gx6605s-timer" + - reg + Usage: required + Value type: <u32 u32> + Definition: <phyaddr size> in soc from cpu view + - clocks + Usage: required + Value type: phandle + clock specifier cells + Definition: must be input clk node + - interrupt + Usage: required + Value type: <u32> + Definition: must be timer irq num defined by soc + +Examples: +--------- + + timer0: timer@20a000 { + compatible = "csky,gx6605s-timer"; + reg = <0x0020a000 0x400>; + clocks = <&dummy_apb_clk>; + interrupts = <10>; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt new file mode 100644 index 000000000000..15cfec08fbb8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt @@ -0,0 +1,42 @@ +============================ +C-SKY Multi-processors Timer +============================ + +C-SKY multi-processors timer is designed for C-SKY SMP system and the +regs is accessed by cpu co-processor 4 registers with mtcr/mfcr. + + - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer. + - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg. + - PTIM_CCVR "cr<3, 14>" Current counter value reg. + - PTIM_LVR "cr<6, 14>" Window value reg to triger next event. + +============================== +timer node bindings definition +============================== + + Description: Describes SMP timer + + PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: must be "csky,mptimer" + - clocks + Usage: required + Value type: <node> + Definition: must be input clk node + - interrupts + Usage: required + Value type: <u32> + Definition: must be timer irq num defined by soc + +Examples: +--------- + + timer: timer { + compatible = "csky,mptimer"; + clocks = <&dummy_apb_clk>; + interrupts = <16>; + interrupt-parent = <&intc>; + }; diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index a11f4ba98b05..55c77e44bb2d 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -620,4 +620,22 @@ config RISCV_TIMER is accessed via both the SBI and the rdcycle instruction. This is required for all RISC-V systems. +config CSKY_MP_TIMER + bool "SMP Timer for the C-SKY platform" if COMPILE_TEST + depends on CSKY + select TIMER_OF + help + Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP + system. + csky,mptimer is not only used in SMP system, it also could be used + single core system. It's not a mmio reg and it use mtcr/mfcr instruction. + +config GX6605S_TIMER + bool "Gx6605s SOC system timer driver" if COMPILE_TEST + depends on CSKY + select CLKSRC_MMIO + select TIMER_OF + help + This option enables support for gx6605s SOC's timer. + endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index db51b2427e8a..919633133271 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -79,3 +79,5 @@ obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o +obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o +obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o diff --git a/drivers/clocksource/timer-gx6605s.c b/drivers/clocksource/timer-gx6605s.c new file mode 100644 index 000000000000..80d0939d040b --- /dev/null +++ b/drivers/clocksource/timer-gx6605s.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/sched_clock.h> + +#include "timer-of.h" + +#define CLKSRC_OFFSET 0x40 + +#define TIMER_STATUS 0x00 +#define TIMER_VALUE 0x04 +#define TIMER_CONTRL 0x10 +#define TIMER_CONFIG 0x20 +#define TIMER_DIV 0x24 +#define TIMER_INI 0x28 + +#define GX6605S_STATUS_CLR BIT(0) +#define GX6605S_CONTRL_RST BIT(0) +#define GX6605S_CONTRL_START BIT(1) +#define GX6605S_CONFIG_EN BIT(0) +#define GX6605S_CONFIG_IRQ_EN BIT(1) + +static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev) +{ + struct clock_event_device *ce = dev; + void __iomem *base = timer_of_base(to_timer_of(ce)); + + writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS); + + ce->event_handler(ce); + + return IRQ_HANDLED; +} + +static int gx6605s_timer_set_oneshot(struct clock_event_device *ce) +{ + void __iomem *base = timer_of_base(to_timer_of(ce)); + + /* reset and stop counter */ + writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL); + + /* enable with irq and start */ + writel_relaxed(GX6605S_CONFIG_EN | GX6605S_CONFIG_IRQ_EN, + base + TIMER_CONFIG); + + return 0; +} + +static int gx6605s_timer_set_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + void __iomem *base = timer_of_base(to_timer_of(ce)); + + /* use reset to pause timer */ + writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL); + + /* config next timeout value */ + writel_relaxed(ULONG_MAX - delta, base + TIMER_INI); + writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL); + + return 0; +} + +static int gx6605s_timer_shutdown(struct clock_event_device *ce) +{ + void __iomem *base = timer_of_base(to_timer_of(ce)); + + writel_relaxed(0, base + TIMER_CONTRL); + writel_relaxed(0, base + TIMER_CONFIG); + + return 0; +} + +static struct timer_of to = { + .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK, + .clkevt = { + .rating = 300, + .features = CLOCK_EVT_FEAT_DYNIRQ | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = gx6605s_timer_shutdown, + .set_state_oneshot = gx6605s_timer_set_oneshot, + .set_next_event = gx6605s_timer_set_next_event, + .cpumask = cpu_possible_mask, + }, + .of_irq = { + .handler = gx6605s_timer_interrupt, + .flags = IRQF_TIMER | IRQF_IRQPOLL, + }, +}; + +static u64 notrace gx6605s_sched_clock_read(void) +{ + void __iomem *base; + + base = timer_of_base(&to) + CLKSRC_OFFSET; + + return (u64)readl_relaxed(base + TIMER_VALUE); +} + +static void gx6605s_clkevt_init(void __iomem *base) +{ + writel_relaxed(0, base + TIMER_DIV); + writel_relaxed(0, base + TIMER_CONFIG); + + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), 2, + ULONG_MAX); +} + +static int gx6605s_clksrc_init(void __iomem *base) +{ + writel_relaxed(0, base + TIMER_DIV); + writel_relaxed(0, base + TIMER_INI); + + writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL); + + writel_relaxed(GX6605S_CONFIG_EN, base + TIMER_CONFIG); + + writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL); + + sched_clock_register(gx6605s_sched_clock_read, 32, timer_of_rate(&to)); + + return clocksource_mmio_init(base + TIMER_VALUE, "gx6605s", + timer_of_rate(&to), 200, 32, clocksource_mmio_readl_up); +} + +static int __init gx6605s_timer_init(struct device_node *np) +{ + int ret; + + /* + * The timer driver is for nationalchip gx6605s SOC and there are two + * same timer in gx6605s. We use one for clkevt and another for clksrc. + * + * The timer is mmio map to access, so we need give mmio address in dts. + * + * It provides a 32bit countup timer and interrupt will be caused by + * count-overflow. + * So we need set-next-event by ULONG_MAX - delta in TIMER_INI reg. + * + * The counter at 0x0 offset is clock event. + * The counter at 0x40 offset is clock source. + * They are the same in hardware, just different used by driver. + */ + ret = timer_of_init(np, &to); + if (ret) + return ret; + + gx6605s_clkevt_init(timer_of_base(&to)); + + return gx6605s_clksrc_init(timer_of_base(&to) + CLKSRC_OFFSET); +} +TIMER_OF_DECLARE(csky_gx6605s_timer, "csky,gx6605s-timer", gx6605s_timer_init); diff --git a/drivers/clocksource/timer-mp-csky.c b/drivers/clocksource/timer-mp-csky.c new file mode 100644 index 000000000000..a8acc431a774 --- /dev/null +++ b/drivers/clocksource/timer-mp-csky.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/sched_clock.h> +#include <linux/cpu.h> +#include <linux/of_irq.h> +#include <asm/reg_ops.h> + +#include "timer-of.h" + +#define PTIM_CCVR "cr<3, 14>" +#define PTIM_CTLR "cr<0, 14>" +#define PTIM_LVR "cr<6, 14>" +#define PTIM_TSR "cr<1, 14>" + +static int csky_mptimer_irq; + +static int csky_mptimer_set_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + mtcr(PTIM_LVR, delta); + + return 0; +} + +static int csky_mptimer_shutdown(struct clock_event_device *ce) +{ + mtcr(PTIM_CTLR, 0); + + return 0; +} + +static int csky_mptimer_oneshot(struct clock_event_device *ce) +{ + mtcr(PTIM_CTLR, 1); + + return 0; +} + +static int csky_mptimer_oneshot_stopped(struct clock_event_device *ce) +{ + mtcr(PTIM_CTLR, 0); + + return 0; +} + +static DEFINE_PER_CPU(struct timer_of, csky_to) = { + .flags = TIMER_OF_CLOCK, + .clkevt = { + .rating = 300, + .features = CLOCK_EVT_FEAT_PERCPU | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = csky_mptimer_shutdown, + .set_state_oneshot = csky_mptimer_oneshot, + .set_state_oneshot_stopped = csky_mptimer_oneshot_stopped, + .set_next_event = csky_mptimer_set_next_event, + }, +}; + +static irqreturn_t csky_timer_interrupt(int irq, void *dev) +{ + struct timer_of *to = this_cpu_ptr(&csky_to); + + mtcr(PTIM_TSR, 0); + + to->clkevt.event_handler(&to->clkevt); + + return IRQ_HANDLED; +} + +/* + * clock event for percpu + */ +static int csky_mptimer_starting_cpu(unsigned int cpu) +{ + struct timer_of *to = per_cpu_ptr(&csky_to, cpu); + + to->clkevt.cpumask = cpumask_of(cpu); + + clockevents_config_and_register(&to->clkevt, timer_of_rate(to), + 2, ULONG_MAX); + + enable_percpu_irq(csky_mptimer_irq, 0); + + return 0; +} + +static int csky_mptimer_dying_cpu(unsigned int cpu) +{ + disable_percpu_irq(csky_mptimer_irq); + + return 0; +} + +/* + * clock source + */ +static u64 sched_clock_read(void) +{ + return (u64)mfcr(PTIM_CCVR); +} + +static u64 clksrc_read(struct clocksource *c) +{ + return (u64)mfcr(PTIM_CCVR); +} + +struct clocksource csky_clocksource = { + .name = "csky", + .rating = 400, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = clksrc_read, +}; + +static int __init csky_mptimer_init(struct device_node *np) +{ + int ret, cpu, cpu_rollback; + struct timer_of *to = NULL; + + /* + * Csky_mptimer is designed for C-SKY SMP multi-processors and + * every core has it's own private irq and regs for clkevt and + * clksrc. + * + * The regs is accessed by cpu instruction: mfcr/mtcr instead of + * mmio map style. So we needn't mmio-address in dts, but we still + * need to give clk and irq number. + * + * We use private irq for the mptimer and irq number is the same + * for every core. So we use request_percpu_irq() in timer_of_init. + */ + csky_mptimer_irq = irq_of_parse_and_map(np, 0); + if (csky_mptimer_irq <= 0) + return -EINVAL; + + ret = request_percpu_irq(csky_mptimer_irq, csky_timer_interrupt, + "csky_mp_timer", &csky_to); + if (ret) + return -EINVAL; + + for_each_possible_cpu(cpu) { + to = per_cpu_ptr(&csky_to, cpu); + ret = timer_of_init(np, to); + if (ret) + goto rollback; + } + + clocksource_register_hz(&csky_clocksource, timer_of_rate(to)); + sched_clock_register(sched_clock_read, 32, timer_of_rate(to)); + + ret = cpuhp_setup_state(CPUHP_AP_CSKY_TIMER_STARTING, + "clockevents/csky/timer:starting", + csky_mptimer_starting_cpu, + csky_mptimer_dying_cpu); + if (ret) + return -EINVAL; + + return 0; + +rollback: + for_each_possible_cpu(cpu_rollback) { + if (cpu_rollback == cpu) + break; + + to = per_cpu_ptr(&csky_to, cpu_rollback); + timer_of_cleanup(to); + } + return -EINVAL; +} +TIMER_OF_DECLARE(csky_mptimer, "csky,mptimer", csky_mptimer_init); diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index caf40ad0bbc6..e0cd2baa8380 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -126,6 +126,7 @@ enum cpuhp_state { CPUHP_AP_MIPS_GIC_TIMER_STARTING, CPUHP_AP_ARC_TIMER_STARTING, CPUHP_AP_RISCV_TIMER_STARTING, + CPUHP_AP_CSKY_TIMER_STARTING, CPUHP_AP_KVM_STARTING, CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING, CPUHP_AP_KVM_ARM_VGIC_STARTING, |