diff options
| -rw-r--r-- | arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/versatile-ab.dts | 10 | ||||
| -rw-r--r-- | arch/arm/boot/dts/versatile-pb.dts | 20 | ||||
| -rw-r--r-- | arch/arm/boot/dts/wm8650.dtsi | 9 | ||||
| -rw-r--r-- | arch/arm/configs/multi_v7_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/configs/sunxi_defconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/gpmc-onenand.c | 14 |
7 files changed, 49 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 314f59c12162..d0c743853318 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -25,9 +25,9 @@ cache-sets = <512>; cache-line-size = <32>; /* At full speed latency must be >=2 */ - arm,tag-latency = <2>; - arm,data-latency = <2 2>; - arm,dirty-latency = <2>; + arm,tag-latency = <8>; + arm,data-latency = <8 8>; + arm,dirty-latency = <8>; }; mtu0: mtu@101e2000 { diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 01f40197ea13..3279bf1a17a1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -110,7 +110,11 @@ interrupt-parent = <&vic>; interrupts = <31>; /* Cascaded to vic */ clear-mask = <0xffffffff>; - valid-mask = <0xffc203f8>; + /* + * Valid interrupt lines mask according to + * table 4-36 page 4-50 of ARM DUI 0225D + */ + valid-mask = <0x0760031b>; }; dma@10130000 { @@ -266,8 +270,8 @@ }; mmc@5000 { compatible = "arm,pl180", "arm,primecell"; - reg = < 0x5000 0x1000>; - interrupts-extended = <&vic 22 &sic 2>; + reg = <0x5000 0x1000>; + interrupts-extended = <&vic 22 &sic 1>; clocks = <&xtal24mhz>, <&pclk>; clock-names = "mclk", "apb_pclk"; }; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index b83137f66034..33a8eb28374e 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -5,6 +5,16 @@ compatible = "arm,versatile-pb"; amba { + /* The Versatile PB is using more SIC IRQ lines than the AB */ + sic: intc@10003000 { + clear-mask = <0xffffffff>; + /* + * Valid interrupt lines mask according to + * figure 3-30 page 3-74 of ARM DUI 0224B + */ + valid-mask = <0x7fe003ff>; + }; + gpio2: gpio@101e6000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x101e6000 0x1000>; @@ -67,6 +77,13 @@ }; fpga { + mmc@5000 { + /* + * Overrides the interrupt assignment from + * the Versatile AB board file. + */ + interrupts-extended = <&sic 22 &sic 23>; + }; uart@9000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x9000 0x1000>; @@ -86,7 +103,8 @@ mmc@b000 { compatible = "arm,pl180", "arm,primecell"; reg = <0xb000 0x1000>; - interrupts-extended = <&vic 23 &sic 2>; + interrupt-parent = <&sic>; + interrupts = <1>, <2>; clocks = <&xtal24mhz>, <&pclk>; clock-names = "mclk", "apb_pclk"; }; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index b1c59a766a13..e12213d16693 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -187,6 +187,15 @@ interrupts = <43>; }; + sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x400>; + interrupts = <20>, <21>; + clocks = <&clksdhc>; + bus-width = <4>; + sdon-inverted; + }; + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 69a22fdb52a5..cd7b198fc79e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -366,6 +366,7 @@ CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_TPS65090=y +CONFIG_AXP20X_POWER=m CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 3c36e16fcacf..b503a89441bf 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -84,6 +84,7 @@ CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y +CONFIG_AXP20X_POWER=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 17a6f752a436..7b76ce01c21d 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -149,8 +149,8 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, freq = 104; break; default: - freq = 54; - break; + pr_err("onenand rate not detected, bad GPMC async timings?\n"); + freq = 0; } return freq; @@ -271,6 +271,11 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; + /* + * Note that we need to keep sync_write set for the call to + * omap2_onenand_set_async_mode() to work to detect the onenand + * supported clock rate for the sync timings. + */ if (gpmc_onenand_data->of_node) { gpmc_read_settings_dt(gpmc_onenand_data->of_node, &onenand_async); @@ -281,12 +286,9 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) else gpmc_onenand_data->flags |= ONENAND_SYNC_READ; onenand_async.sync_read = false; - onenand_async.sync_write = false; } } - omap2_onenand_set_async_mode(onenand_base); - omap2_onenand_calc_async_timings(&t); ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); @@ -310,6 +312,8 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) if (!freq) { /* Very first call freq is not known */ freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); + if (!freq) + return -ENODEV; set_onenand_cfg(onenand_base); } |