diff options
| -rw-r--r-- | drivers/net/Kconfig | 64 | ||||
| -rw-r--r-- | drivers/net/caif/Kconfig | 36 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fs_enet/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/net/ieee802154/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ar5523/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/Kconfig | 58 | ||||
| -rw-r--r-- | drivers/net/wireless/atmel/Kconfig | 42 | ||||
| -rw-r--r-- | drivers/net/wireless/ralink/rt2x00/Kconfig | 44 | ||||
| -rw-r--r-- | drivers/net/wireless/ti/wl12xx/Kconfig | 8 |
10 files changed, 149 insertions, 149 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index df1c7989e13d..d02f12a5254e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -153,22 +153,22 @@ config IPVLAN_L3S select NET_L3_MASTER_DEV config IPVLAN - tristate "IP-VLAN support" - depends on INET - depends on IPV6 || !IPV6 - ---help--- - This allows one to create virtual devices off of a main interface - and packets will be delivered based on the dest L3 (IPv6/IPv4 addr) - on packets. All interfaces (including the main interface) share L2 - making it transparent to the connected L2 switch. + tristate "IP-VLAN support" + depends on INET + depends on IPV6 || !IPV6 + ---help--- + This allows one to create virtual devices off of a main interface + and packets will be delivered based on the dest L3 (IPv6/IPv4 addr) + on packets. All interfaces (including the main interface) share L2 + making it transparent to the connected L2 switch. - Ipvlan devices can be added using the "ip" command from the - iproute2 package starting with the iproute2-3.19 release: + Ipvlan devices can be added using the "ip" command from the + iproute2 package starting with the iproute2-3.19 release: - "ip link add link <main-dev> [ NAME ] type ipvlan" + "ip link add link <main-dev> [ NAME ] type ipvlan" - To compile this driver as a module, choose M here: the module - will be called ipvlan. + To compile this driver as a module, choose M here: the module + will be called ipvlan. config IPVTAP tristate "IP-VLAN based tap driver" @@ -185,11 +185,11 @@ config IPVTAP will be called ipvtap. config VXLAN - tristate "Virtual eXtensible Local Area Network (VXLAN)" - depends on INET - select NET_UDP_TUNNEL - select GRO_CELLS - ---help--- + tristate "Virtual eXtensible Local Area Network (VXLAN)" + depends on INET + select NET_UDP_TUNNEL + select GRO_CELLS + ---help--- This allows one to create vxlan virtual interfaces that provide Layer 2 Networks over Layer 3 Networks. VXLAN is often used to tunnel virtual network infrastructure in virtualized environments. @@ -200,12 +200,12 @@ config VXLAN will be called vxlan. config GENEVE - tristate "Generic Network Virtualization Encapsulation" - depends on INET - depends on IPV6 || !IPV6 - select NET_UDP_TUNNEL - select GRO_CELLS - ---help--- + tristate "Generic Network Virtualization Encapsulation" + depends on INET + depends on IPV6 || !IPV6 + select NET_UDP_TUNNEL + select GRO_CELLS + ---help--- This allows one to create geneve virtual interfaces that provide Layer 2 Networks over Layer 3 Networks. GENEVE is often used to tunnel virtual network infrastructure in virtualized environments. @@ -244,8 +244,8 @@ config MACSEC config NETCONSOLE tristate "Network console logging support" ---help--- - If you want to log kernel messages over the network, enable this. - See <file:Documentation/networking/netconsole.txt> for details. + If you want to log kernel messages over the network, enable this. + See <file:Documentation/networking/netconsole.txt> for details. config NETCONSOLE_DYNAMIC bool "Dynamic reconfiguration of logging targets" @@ -362,12 +362,12 @@ config NET_VRF support enables VRF devices. config VSOCKMON - tristate "Virtual vsock monitoring device" - depends on VHOST_VSOCK - ---help--- - This option enables a monitoring net device for vsock sockets. It is - mostly intended for developers or support to debug vsock issues. If - unsure, say N. + tristate "Virtual vsock monitoring device" + depends on VHOST_VSOCK + ---help--- + This option enables a monitoring net device for vsock sockets. It is + mostly intended for developers or support to debug vsock issues. If + unsure, say N. endif # NET_CORE diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index 96d7cef3289f..e74e2bb61236 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -16,37 +16,37 @@ config CAIF_TTY depends on CAIF && TTY default n ---help--- - The CAIF TTY transport driver is a Line Discipline (ldisc) - identified as N_CAIF. When this ldisc is opened from user space - it will redirect the TTY's traffic into the CAIF stack. + The CAIF TTY transport driver is a Line Discipline (ldisc) + identified as N_CAIF. When this ldisc is opened from user space + it will redirect the TTY's traffic into the CAIF stack. config CAIF_SPI_SLAVE tristate "CAIF SPI transport driver for slave interface" depends on CAIF && HAS_DMA default n ---help--- - The CAIF Link layer SPI Protocol driver for Slave SPI interface. - This driver implements a platform driver to accommodate for a - platform specific SPI device. A sample CAIF SPI Platform device is - provided in <file:Documentation/networking/caif/spi_porting.txt>. + The CAIF Link layer SPI Protocol driver for Slave SPI interface. + This driver implements a platform driver to accommodate for a + platform specific SPI device. A sample CAIF SPI Platform device is + provided in <file:Documentation/networking/caif/spi_porting.txt>. config CAIF_SPI_SYNC bool "Next command and length in start of frame" depends on CAIF_SPI_SLAVE default n ---help--- - Putting the next command and length in the start of the frame can - help to synchronize to the next transfer in case of over or under-runs. - This option also needs to be enabled on the modem. + Putting the next command and length in the start of the frame can + help to synchronize to the next transfer in case of over or under-runs. + This option also needs to be enabled on the modem. config CAIF_HSI - tristate "CAIF HSI transport driver" - depends on CAIF - default n - ---help--- - The CAIF low level driver for CAIF over HSI. - Be aware that if you enable this then you also need to - enable a low-level HSI driver. + tristate "CAIF HSI transport driver" + depends on CAIF + default n + ---help--- + The CAIF low level driver for CAIF over HSI. + Be aware that if you enable this then you also need to + enable a low-level HSI driver. config CAIF_VIRTIO tristate "CAIF virtio transport driver" @@ -56,7 +56,7 @@ config CAIF_VIRTIO select GENERIC_ALLOCATOR default n ---help--- - The CAIF driver for CAIF over Virtio. + The CAIF driver for CAIF over Virtio. if CAIF_VIRTIO source "drivers/vhost/Kconfig.vringh" diff --git a/drivers/net/ethernet/freescale/fs_enet/Kconfig b/drivers/net/ethernet/freescale/fs_enet/Kconfig index 245d9a68a71f..7f20840fde07 100644 --- a/drivers/net/ethernet/freescale/fs_enet/Kconfig +++ b/drivers/net/ethernet/freescale/fs_enet/Kconfig @@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only config FS_ENET - tristate "Freescale Ethernet Driver" - depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x) - select MII - select PHYLIB + tristate "Freescale Ethernet Driver" + depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x) + select MII + select PHYLIB config FS_ENET_MPC5121_FEC def_bool y if (FS_ENET && PPC_MPC512x) diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig index 8af5b7e9f4ed..c92a62dbf398 100644 --- a/drivers/net/ieee802154/Kconfig +++ b/drivers/net/ieee802154/Kconfig @@ -74,9 +74,9 @@ config IEEE802154_ATUSB The module will be called 'atusb'. config IEEE802154_ADF7242 - tristate "ADF7242 transceiver driver" - depends on IEEE802154_DRIVERS && MAC802154 - depends on SPI + tristate "ADF7242 transceiver driver" + depends on IEEE802154_DRIVERS && MAC802154 + depends on SPI ---help--- Say Y here to enable the ADF7242 SPI 802.15.4 wireless controller. @@ -107,9 +107,9 @@ config IEEE802154_CA8210_DEBUGFS management entities. config IEEE802154_MCR20A - tristate "MCR20A transceiver driver" - depends on IEEE802154_DRIVERS && MAC802154 - depends on SPI + tristate "MCR20A transceiver driver" + depends on IEEE802154_DRIVERS && MAC802154 + depends on SPI ---help--- Say Y here to enable the MCR20A SPI 802.15.4 wireless controller. diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index 56616d988c96..7b90b8546162 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -30,12 +30,12 @@ config ATH_DEBUG Right now only ath9k makes use of this. config ATH_TRACEPOINTS - bool "Atheros wireless tracing" - depends on ATH_DEBUG - depends on EVENT_TRACING - ---help--- - This option enables tracepoints for atheros wireless drivers. - Currently, ath9k makes use of this facility. + bool "Atheros wireless tracing" + depends on ATH_DEBUG + depends on EVENT_TRACING + ---help--- + This option enables tracepoints for atheros wireless drivers. + Currently, ath9k makes use of this facility. config ATH_REG_DYNAMIC_USER_REG_HINTS bool "Atheros dynamic user regulatory hints" diff --git a/drivers/net/wireless/ath/ar5523/Kconfig b/drivers/net/wireless/ath/ar5523/Kconfig index 65b39c7d035d..e82df5f1ea67 100644 --- a/drivers/net/wireless/ath/ar5523/Kconfig +++ b/drivers/net/wireless/ath/ar5523/Kconfig @@ -1,9 +1,9 @@ # SPDX-License-Identifier: ISC config AR5523 - tristate "Atheros AR5523 wireless driver support" - depends on MAC80211 && USB - select ATH_COMMON - select FW_LOADER - ---help--- - This module add support for AR5523 based USB dongles such as D-Link - DWL-G132, Netgear WPN111 and many more. + tristate "Atheros AR5523 wireless driver support" + depends on MAC80211 && USB + select ATH_COMMON + select FW_LOADER + ---help--- + This module add support for AR5523 based USB dongles such as D-Link + DWL-G132, Netgear WPN111 and many more. diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index c99f42284465..78620c6b64a2 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -144,13 +144,13 @@ config ATH9K_RFKILL a platform that can toggle the RF-Kill GPIO. config ATH9K_CHANNEL_CONTEXT - bool "Channel Context support" - depends on ATH9K - default n - ---help--- - This option enables channel context support in ath9k, which is needed - for multi-channel concurrency. Enable this if P2P PowerSave support - is required. + bool "Channel Context support" + depends on ATH9K + default n + ---help--- + This option enables channel context support in ath9k, which is needed + for multi-channel concurrency. Enable this if P2P PowerSave support + is required. config ATH9K_PCOEM bool "Atheros ath9k support for PC OEM cards" if EXPERT @@ -162,32 +162,32 @@ config ATH9K_PCI_NO_EEPROM depends on ATH9K_PCI default n help - This separate driver provides a loader in order to support the - AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have - their initialization data (which contains the real PCI Device ID - that ath9k will need) stored together with the calibration data out - of reach for the ath9k chip. + This separate driver provides a loader in order to support the + AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have + their initialization data (which contains the real PCI Device ID + that ath9k will need) stored together with the calibration data out + of reach for the ath9k chip. - These devices are usually various network appliances, routers or - access Points and such. + These devices are usually various network appliances, routers or + access Points and such. - If unsure say N. + If unsure say N. config ATH9K_HTC - tristate "Atheros HTC based wireless cards support" - depends on USB && MAC80211 - select ATH9K_HW - select MAC80211_LEDS - select LEDS_CLASS - select NEW_LEDS - select ATH9K_COMMON - ---help--- - Support for Atheros HTC based cards. - Chipsets supported: AR9271 - - For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc - - The built module will be ath9k_htc. + tristate "Atheros HTC based wireless cards support" + depends on USB && MAC80211 + select ATH9K_HW + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS + select ATH9K_COMMON + ---help--- + Support for Atheros HTC based cards. + Chipsets supported: AR9271 + + For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc + + The built module will be ath9k_htc. config ATH9K_HTC_DEBUGFS bool "Atheros ath9k_htc debugging" diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig index 4c0556b3a5ba..c2142c70f25d 100644 --- a/drivers/net/wireless/atmel/Kconfig +++ b/drivers/net/wireless/atmel/Kconfig @@ -13,29 +13,29 @@ config WLAN_VENDOR_ATMEL if WLAN_VENDOR_ATMEL config ATMEL - tristate "Atmel at76c50x chipset 802.11b support" - depends on CFG80211 && (PCI || PCMCIA) - select WIRELESS_EXT - select WEXT_PRIV - select FW_LOADER - select CRC32 - ---help--- - A driver 802.11b wireless cards based on the Atmel fast-vnet - chips. This driver supports standard Linux wireless extensions. - - Many cards based on this chipset do not have flash memory - and need their firmware loaded at start-up. If yours is - one of these, you will need to provide a firmware image - to be loaded into the card by the driver. The Atmel - firmware package can be downloaded from - <http://www.thekelleys.org.uk/atmel> + tristate "Atmel at76c50x chipset 802.11b support" + depends on CFG80211 && (PCI || PCMCIA) + select WIRELESS_EXT + select WEXT_PRIV + select FW_LOADER + select CRC32 + ---help--- + A driver 802.11b wireless cards based on the Atmel fast-vnet + chips. This driver supports standard Linux wireless extensions. + + Many cards based on this chipset do not have flash memory + and need their firmware loaded at start-up. If yours is + one of these, you will need to provide a firmware image + to be loaded into the card by the driver. The Atmel + firmware package can be downloaded from + <http://www.thekelleys.org.uk/atmel> config PCI_ATMEL - tristate "Atmel at76c506 PCI cards" - depends on ATMEL && PCI - ---help--- - Enable support for PCI and mini-PCI cards containing the - Atmel at76c506 chip. + tristate "Atmel at76c506 PCI cards" + depends on ATMEL && PCI + ---help--- + Enable support for PCI and mini-PCI cards containing the + Atmel at76c506 chip. config PCMCIA_ATMEL tristate "Atmel at76c502/at76c504 PCMCIA cards" diff --git a/drivers/net/wireless/ralink/rt2x00/Kconfig b/drivers/net/wireless/ralink/rt2x00/Kconfig index f8a9244ce012..d4969d617822 100644 --- a/drivers/net/wireless/ralink/rt2x00/Kconfig +++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -95,20 +95,20 @@ config RT2800PCI_RT35XX config RT2800PCI_RT53XX - bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)" - default y - ---help--- - This adds support for rt53xx wireless chipset family to the - rt2800pci driver. - Supported chips: RT5390 + bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)" + default y + ---help--- + This adds support for rt53xx wireless chipset family to the + rt2800pci driver. + Supported chips: RT5390 config RT2800PCI_RT3290 - bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)" - default y - ---help--- - This adds support for rt3290 wireless chipset family to the - rt2800pci driver. - Supported chips: RT3290 + bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)" + default y + ---help--- + This adds support for rt3290 wireless chipset family to the + rt2800pci driver. + Supported chips: RT3290 endif config RT2500USB @@ -174,18 +174,18 @@ config RT2800USB_RT3573 in the rt2800usb driver. config RT2800USB_RT53XX - bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" - ---help--- - This adds support for rt53xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT5370 + bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" + ---help--- + This adds support for rt53xx wireless chipset family to the + rt2800usb driver. + Supported chips: RT5370 config RT2800USB_RT55XX - bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)" - ---help--- - This adds support for rt55xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT5572 + bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)" + ---help--- + This adds support for rt55xx wireless chipset family to the + rt2800usb driver. + Supported chips: RT5572 config RT2800USB_UNKNOWN bool "rt2800usb - Include support for unknown (USB) devices" diff --git a/drivers/net/wireless/ti/wl12xx/Kconfig b/drivers/net/wireless/ti/wl12xx/Kconfig index e409042ee9a0..9c4511604b67 100644 --- a/drivers/net/wireless/ti/wl12xx/Kconfig +++ b/drivers/net/wireless/ti/wl12xx/Kconfig @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only config WL12XX - tristate "TI wl12xx support" + tristate "TI wl12xx support" depends on MAC80211 - select WLCORE - ---help--- + select WLCORE + ---help--- This module adds support for wireless adapters based on TI wl1271, wl1273, wl1281 and wl1283 chipsets. This module does *not* include support for wl1251. For wl1251 support, use the separate homonymous - driver instead. + driver instead. |