diff options
| -rw-r--r-- | arch/mips/Makefile | 3 | ||||
| -rw-r--r-- | arch/mips/configs/generic/board-ocelot.config | 35 | ||||
| -rw-r--r-- | arch/mips/generic/Kconfig | 16 | ||||
| -rw-r--r-- | arch/mips/generic/Makefile | 1 | ||||
| -rw-r--r-- | arch/mips/generic/board-ocelot.c | 78 |
5 files changed, 133 insertions, 0 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 2ed4c8927701..646a2d98012d 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -565,6 +565,9 @@ generic_defconfig: # now that the boards have been converted to use the generic kernel they are # wrappers around the generic rules above. # +legacy_defconfigs += ocelot_defconfig +ocelot_defconfig-y := 32r2el_defconfig BOARDS=ocelot + legacy_defconfigs += sead3_defconfig sead3_defconfig-y := 32r2el_defconfig BOARDS=sead-3 diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config new file mode 100644 index 000000000000..aa815761d85e --- /dev/null +++ b/arch/mips/configs/generic/board-ocelot.config @@ -0,0 +1,35 @@ +# require CONFIG_CPU_MIPS32_R2=y + +CONFIG_LEGACY_BOARD_OCELOT=y + +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_UBI=y + +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y + +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y + +CONFIG_GPIO_SYSFS=y + +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +CONFIG_SPI=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_DESIGNWARE=y +CONFIG_SPI_SPIDEV=y + +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_OCELOT_RESET=y + +CONFIG_MAGIC_SYSRQ=y diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index 2ff3b17bfab1..ba9b2c8cce68 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -27,6 +27,22 @@ config LEGACY_BOARD_SEAD3 Enable this to include support for booting on MIPS SEAD-3 FPGA-based development boards, which boot using a legacy boot protocol. +comment "MSCC Ocelot doesn't work with SEAD3 enabled" + depends on LEGACY_BOARD_SEAD3 + +config LEGACY_BOARD_OCELOT + bool "Support MSCC Ocelot boards" + depends on LEGACY_BOARD_SEAD3=n + select LEGACY_BOARDS + select MSCC_OCELOT + +config MSCC_OCELOT + bool + select GPIOLIB + select MSCC_OCELOT_IRQ + select SYS_HAS_EARLY_PRINTK + select USE_GENERIC_EARLY_PRINTK_8250 + comment "FIT/UHI Boards" config FIT_IMAGE_FDT_BOSTON diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile index 5c31e0c4697d..d03a36f869a4 100644 --- a/arch/mips/generic/Makefile +++ b/arch/mips/generic/Makefile @@ -14,5 +14,6 @@ obj-y += proc.o obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o +obj-$(CONFIG_LEGACY_BOARD_OCELOT) += board-ocelot.o obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_VIRT_BOARD_RANCHU) += board-ranchu.o diff --git a/arch/mips/generic/board-ocelot.c b/arch/mips/generic/board-ocelot.c new file mode 100644 index 000000000000..06d92fb37769 --- /dev/null +++ b/arch/mips/generic/board-ocelot.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Microsemi MIPS SoC support + * + * Copyright (c) 2017 Microsemi Corporation + */ +#include <asm/machine.h> +#include <asm/prom.h> + +#define DEVCPU_GCB_CHIP_REGS_CHIP_ID 0x71070000 +#define CHIP_ID_PART_ID GENMASK(27, 12) + +#define OCELOT_PART_ID (0x7514 << 12) + +#define UART_UART 0x70100000 + +static __init bool ocelot_detect(void) +{ + u32 rev; + int idx; + + /* Look for the TLB entry set up by redboot before trying to use it */ + write_c0_entryhi(DEVCPU_GCB_CHIP_REGS_CHIP_ID); + mtc0_tlbw_hazard(); + tlb_probe(); + tlb_probe_hazard(); + idx = read_c0_index(); + if (idx < 0) + return 0; + + /* A TLB entry exists, lets assume its usable and check the CHIP ID */ + rev = __raw_readl((void __iomem *)DEVCPU_GCB_CHIP_REGS_CHIP_ID); + + if ((rev & CHIP_ID_PART_ID) != OCELOT_PART_ID) + return 0; + + /* Copy command line from bootloader early for Initrd detection */ + if (fw_arg0 < 10 && (fw_arg1 & 0xFFF00000) == 0x80000000) { + unsigned int prom_argc = fw_arg0; + const char **prom_argv = (const char **)fw_arg1; + + if (prom_argc > 1 && strlen(prom_argv[1]) > 0) + /* ignore all built-in args if any f/w args given */ + strcpy(arcs_cmdline, prom_argv[1]); + } + + return 1; +} + +static void __init ocelot_earlyprintk_init(void) +{ + void __iomem *uart_base; + + uart_base = ioremap_nocache(UART_UART, 0x20); + setup_8250_early_printk_port((unsigned long)uart_base, 2, 50000); +} + +static void __init ocelot_late_init(void) +{ + ocelot_earlyprintk_init(); +} + +static __init const void *ocelot_fixup_fdt(const void *fdt, + const void *match_data) +{ + /* This has to be done so late because ioremap needs to work */ + late_time_init = ocelot_late_init; + + return fdt; +} + +extern char __dtb_ocelot_pcb123_begin[]; + +MIPS_MACHINE(ocelot) = { + .fdt = __dtb_ocelot_pcb123_begin, + .fixup_fdt = ocelot_fixup_fdt, + .detect = ocelot_detect, +}; |