summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/misc-devices/eeprom.rst (renamed from Documentation/misc-devices/eeprom)43
-rw-r--r--Documentation/misc-devices/ics932s401.rst (renamed from Documentation/misc-devices/ics932s401)7
-rw-r--r--Documentation/misc-devices/index.rst5
-rw-r--r--Documentation/misc-devices/isl29003.rst (renamed from Documentation/misc-devices/isl29003)15
-rw-r--r--Documentation/misc-devices/lis3lv02d.rst (renamed from Documentation/misc-devices/lis3lv02d)20
-rw-r--r--Documentation/misc-devices/max6875.rst (renamed from Documentation/misc-devices/max6875)52
-rw-r--r--MAINTAINERS4
-rw-r--r--drivers/misc/isl29003.c2
-rw-r--r--drivers/platform/x86/Kconfig2
9 files changed, 108 insertions, 42 deletions
diff --git a/Documentation/misc-devices/eeprom b/Documentation/misc-devices/eeprom.rst
index ba692011f221..008249675ccc 100644
--- a/Documentation/misc-devices/eeprom
+++ b/Documentation/misc-devices/eeprom.rst
@@ -1,11 +1,17 @@
+====================
Kernel driver eeprom
====================
Supported chips:
+
* Any EEPROM chip in the designated address range
+
Prefix: 'eeprom'
+
Addresses scanned: I2C 0x50 - 0x57
+
Datasheets: Publicly available from:
+
Atmel (www.atmel.com),
Catalyst (www.catsemi.com),
Fairchild (www.fairchildsemi.com),
@@ -16,7 +22,9 @@ Supported chips:
Xicor (www.xicor.com),
and others.
- Chip Size (bits) Address
+ ========= ============= ============================================
+ Chip Size (bits) Address
+ ========= ============= ============================================
24C01 1K 0x50 (shadows at 0x51 - 0x57)
24C01A 1K 0x50 - 0x57 (Typical device on DIMMs)
24C02 2K 0x50 - 0x57
@@ -24,7 +32,7 @@ Supported chips:
(additional data at 0x51, 0x53, 0x55, 0x57)
24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52,
0x53, 0x55, 0x56, 0x57)
- 24C16 16K 0x50 (additional data at 0x51 - 0x57)
+ 24C16 16K 0x50 (additional data at 0x51 - 0x57)
Sony 2K 0x57
Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37
@@ -33,14 +41,15 @@ Supported chips:
Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37
Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37
ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37
+ ========= ============= ============================================
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Jean Delvare <jdelvare@suse.de>,
- Greg Kroah-Hartman <greg@kroah.com>,
- IBM Corp.
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>,
+ - Jean Delvare <jdelvare@suse.de>,
+ - Greg Kroah-Hartman <greg@kroah.com>,
+ - IBM Corp.
Description
-----------
@@ -74,23 +83,25 @@ this address will write protect the memory array permanently, and the
device will no longer respond at the 0x30-37 address. The eeprom driver
does not support this register.
-Lacking functionality:
+Lacking functionality
+---------------------
* Full support for larger devices (24C04, 24C08, 24C16). These are not
-typically found on a PC. These devices will appear as separate devices at
-multiple addresses.
+ typically found on a PC. These devices will appear as separate devices at
+ multiple addresses.
* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512).
-These devices require two-byte address fields and are not supported.
+ These devices require two-byte address fields and are not supported.
* Enable Writing. Again, no technical reason why not, but making it easy
-to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
-to disable the DIMMs (potentially preventing the computer from booting)
-until the values are restored somehow.
+ to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
+ to disable the DIMMs (potentially preventing the computer from booting)
+ until the values are restored somehow.
-Use:
+Use
+---
After inserting the module (and any other required SMBus/i2c modules), you
-should have some EEPROM directories in /sys/bus/i2c/devices/* of names such
+should have some EEPROM directories in ``/sys/bus/i2c/devices/*`` of names such
as "0-0050". Inside each of these is a series of files, the eeprom file
contains the binary data from EEPROM.
diff --git a/Documentation/misc-devices/ics932s401 b/Documentation/misc-devices/ics932s401.rst
index bdac67ff6e3f..613ee54a9c21 100644
--- a/Documentation/misc-devices/ics932s401
+++ b/Documentation/misc-devices/ics932s401.rst
@@ -1,10 +1,15 @@
+========================
Kernel driver ics932s401
-======================
+========================
Supported chips:
+
* IDT ICS932S401
+
Prefix: 'ics932s401'
+
Addresses scanned: I2C 0x69
+
Datasheet: Publicly available at the IDT website
Author: Darrick J. Wong
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index dfd1f45a3127..a57f92dfe49a 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -14,4 +14,9 @@ fit into other categories.
.. toctree::
:maxdepth: 2
+ eeprom
ibmvmc
+ ics932s401
+ isl29003
+ lis3lv02d
+ max6875
diff --git a/Documentation/misc-devices/isl29003 b/Documentation/misc-devices/isl29003.rst
index 80b952fd32ff..0cc38aed6c00 100644
--- a/Documentation/misc-devices/isl29003
+++ b/Documentation/misc-devices/isl29003.rst
@@ -1,10 +1,15 @@
+======================
Kernel driver isl29003
-=====================
+======================
Supported chips:
+
* Intersil ISL29003
+
Prefix: 'isl29003'
+
Addresses scanned: none
+
Datasheet:
http://www.intersil.com/data/fn/fn7464.pdf
@@ -37,25 +42,33 @@ Sysfs entries
-------------
range:
+ == ===========================
0: 0 lux to 1000 lux (default)
1: 0 lux to 4000 lux
2: 0 lux to 16,000 lux
3: 0 lux to 64,000 lux
+ == ===========================
resolution:
+ == =====================
0: 2^16 cycles (default)
1: 2^12 cycles
2: 2^8 cycles
3: 2^4 cycles
+ == =====================
mode:
+ == =================================================
0: diode1's current (unsigned 16bit) (default)
1: diode1's current (unsigned 16bit)
2: difference between diodes (l1 - l2, signed 15bit)
+ == =================================================
power_state:
+ == =================================================
0: device is disabled (default)
1: device is enabled
+ == =================================================
lux (read only):
returns the value from the last sensor reading
diff --git a/Documentation/misc-devices/lis3lv02d b/Documentation/misc-devices/lis3lv02d.rst
index f89960a0ff95..959bd2b822cf 100644
--- a/Documentation/misc-devices/lis3lv02d
+++ b/Documentation/misc-devices/lis3lv02d.rst
@@ -1,3 +1,4 @@
+=======================
Kernel driver lis3lv02d
=======================
@@ -8,8 +9,8 @@ Supported chips:
LIS331DLH (16 bits)
Authors:
- Yan Burman <burman.yan@gmail.com>
- Eric Piel <eric.piel@tremplin-utc.net>
+ - Yan Burman <burman.yan@gmail.com>
+ - Eric Piel <eric.piel@tremplin-utc.net>
Description
@@ -25,11 +26,15 @@ neverball). The accelerometer data is readable via
to mg values (1/1000th of earth gravity).
Sysfs attributes under /sys/devices/platform/lis3lv02d/:
-position - 3D position that the accelerometer reports. Format: "(x,y,z)"
-rate - read reports the sampling rate of the accelerometer device in HZ.
+
+position
+ - 3D position that the accelerometer reports. Format: "(x,y,z)"
+rate
+ - read reports the sampling rate of the accelerometer device in HZ.
write changes sampling rate of the accelerometer device.
Only values which are supported by HW are accepted.
-selftest - performs selftest for the chip as specified by chip manufacturer.
+selftest
+ - performs selftest for the chip as specified by chip manufacturer.
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick. Joystick device can be
@@ -69,11 +74,12 @@ Axes orientation
For better compatibility between the various laptops. The values reported by
the accelerometer are converted into a "standard" organisation of the axes
(aka "can play neverball out of the box"):
+
* When the laptop is horizontal the position reported is about 0 for X and Y
- and a positive value for Z
+ and a positive value for Z
* If the left side is elevated, X increases (becomes positive)
* If the front side (where the touchpad is) is elevated, Y decreases
- (becomes negative)
+ (becomes negative)
* If the laptop is put upside-down, Z becomes negative
If your laptop model is not recognized (cf "dmesg"), you can send an
diff --git a/Documentation/misc-devices/max6875 b/Documentation/misc-devices/max6875.rst
index 2f2bd0b17b5d..ad419ac22a5b 100644
--- a/Documentation/misc-devices/max6875
+++ b/Documentation/misc-devices/max6875.rst
@@ -1,12 +1,16 @@
+=====================
Kernel driver max6875
=====================
Supported chips:
+
* Maxim MAX6874, MAX6875
+
Prefix: 'max6875'
+
Addresses scanned: None (see below)
- Datasheet:
- http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
+
+ Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
Author: Ben Gardner <bgardner@wabtec.com>
@@ -24,9 +28,13 @@ registers.
The Maxim MAX6874 is a similar, mostly compatible device, with more inputs
and outputs:
- vin gpi vout
+
+=========== === === ====
+- vin gpi vout
+=========== === === ====
MAX6874 6 4 8
MAX6875 4 3 5
+=========== === === ====
See the datasheet for more information.
@@ -41,13 +49,16 @@ General Remarks
---------------
Valid addresses for the MAX6875 are 0x50 and 0x52.
+
Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
+
The driver does not probe any address, so you explicitly instantiate the
devices.
-Example:
-$ modprobe max6875
-$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
+Example::
+
+ $ modprobe max6875
+ $ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
addresses. For example, for address 0x50, it also reserves 0x51.
@@ -58,52 +69,67 @@ Programming the chip using i2c-dev
----------------------------------
Use the i2c-dev interface to access and program the chips.
+
Reads and writes are performed differently depending on the address range.
The configuration registers are at addresses 0x00 - 0x45.
+
Use i2c_smbus_write_byte_data() to write a register and
i2c_smbus_read_byte_data() to read a register.
+
The command is the register number.
Examples:
-To write a 1 to register 0x45:
+
+To write a 1 to register 0x45::
+
i2c_smbus_write_byte_data(fd, 0x45, 1);
-To read register 0x45:
+To read register 0x45::
+
value = i2c_smbus_read_byte_data(fd, 0x45);
The configuration EEPROM is at addresses 0x8000 - 0x8045.
+
The user EEPROM is at addresses 0x8100 - 0x82ff.
Use i2c_smbus_write_word_data() to write a byte to EEPROM.
The command is the upper byte of the address: 0x80, 0x81, or 0x82.
-The data word is the lower part of the address or'd with data << 8.
+The data word is the lower part of the address or'd with data << 8::
+
cmd = address >> 8;
val = (address & 0xff) | (data << 8);
Example:
-To write 0x5a to address 0x8003:
+
+To write 0x5a to address 0x8003::
+
i2c_smbus_write_word_data(fd, 0x80, 0x5a03);
Reading data from the EEPROM is a little more complicated.
+
Use i2c_smbus_write_byte_data() to set the read address and then
i2c_smbus_read_byte() or i2c_smbus_read_i2c_block_data() to read the data.
Example:
-To read data starting at offset 0x8100, first set the address:
+
+To read data starting at offset 0x8100, first set the address::
+
i2c_smbus_write_byte_data(fd, 0x81, 0x00);
-And then read the data
+And then read the data::
+
value = i2c_smbus_read_byte(fd);
- or
+or::
count = i2c_smbus_read_i2c_block_data(fd, 0x84, 16, buffer);
The block read should read 16 bytes.
+
0x84 is the block read command.
See the datasheet for more details.
diff --git a/MAINTAINERS b/MAINTAINERS
index 59e6670c9576..1fc7bafe1d75 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8871,7 +8871,7 @@ F: include/linux/leds.h
LEGACY EEPROM DRIVER
M: Jean Delvare <jdelvare@suse.com>
S: Maintained
-F: Documentation/misc-devices/eeprom
+F: Documentation/misc-devices/eeprom.rst
F: drivers/misc/eeprom/eeprom.c
LEGO MINDSTORMS EV3
@@ -9157,7 +9157,7 @@ F: Documentation/memory-barriers.txt
LIS3LV02D ACCELEROMETER DRIVER
M: Eric Piel <eric.piel@tremplin-utc.net>
S: Maintained
-F: Documentation/misc-devices/lis3lv02d
+F: Documentation/misc-devices/lis3lv02d.rst
F: drivers/misc/lis3lv02d/
F: drivers/platform/x86/hp_accel.c
diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
index 5d0d0c3bad85..c12406f610d5 100644
--- a/drivers/misc/isl29003.c
+++ b/drivers/misc/isl29003.c
@@ -3,7 +3,7 @@
* isl29003.c - Linux kernel module for
* Intersil ISL29003 ambient light sensor
*
- * See file:Documentation/misc-devices/isl29003
+ * See file:Documentation/misc-devices/isl29003.rst
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 5d5cc6111081..efa2ad6635dd 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -341,7 +341,7 @@ config HP_ACCEL
Support for a led indicating disk protection will be provided as
hp::hddprotect. For more information on the feature, refer to
- Documentation/misc-devices/lis3lv02d.
+ Documentation/misc-devices/lis3lv02d.rst.
To compile this driver as a module, choose M here: the module will
be called hp_accel.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 07:11:58 +0100