diff options
| -rw-r--r-- | Documentation/gpu/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/gpu/tve200.rst | 6 | ||||
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/tve200/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/gpu/drm/tve200/Makefile | 5 | ||||
| -rw-r--r-- | drivers/gpu/drm/tve200/tve200_connector.c | 125 | ||||
| -rw-r--r-- | drivers/gpu/drm/tve200/tve200_display.c | 344 | ||||
| -rw-r--r-- | drivers/gpu/drm/tve200/tve200_drm.h | 129 | ||||
| -rw-r--r-- | drivers/gpu/drm/tve200/tve200_drv.c | 278 |
11 files changed, 912 insertions, 0 deletions
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index 35d673bf9b56..c36586dad29d 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -15,6 +15,7 @@ Linux GPU Driver Developer's Guide pl111 tegra tinydrm + tve200 vc4 vga-switcheroo vgaarbiter diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst new file mode 100644 index 000000000000..69b17b324e12 --- /dev/null +++ b/Documentation/gpu/tve200.rst @@ -0,0 +1,6 @@ +================================== + drm/tve200 Faraday TV Encoder 200 +================================== + +.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c + :doc: Faraday TV Encoder 200 diff --git a/MAINTAINERS b/MAINTAINERS index b4a4acc07dd8..a23b69e24814 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4300,6 +4300,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/bochs/ +DRM DRIVER FOR FARADAY TVE200 TV ENCODER +M: Linus Walleij <linus.walleij@linaro.org> +T: git git://anongit.freedesktop.org/drm/drm-misc +S: Maintained +F: drivers/gpu/drm/tve200/ + DRM DRIVER FOR INTEL I810 VIDEO CARDS S: Orphan / Obsolete F: drivers/gpu/drm/i810/ diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 83cb2a88c204..c5e1a8409285 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -278,6 +278,8 @@ source "drivers/gpu/drm/tinydrm/Kconfig" source "drivers/gpu/drm/pl111/Kconfig" +source "drivers/gpu/drm/tve200/Kconfig" + # Keep legacy drivers last menuconfig DRM_LEGACY diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index a8acc197dec3..c5900cc88d7a 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -100,3 +100,4 @@ obj-$(CONFIG_DRM_ZTE) += zte/ obj-$(CONFIG_DRM_MXSFB) += mxsfb/ obj-$(CONFIG_DRM_TINYDRM) += tinydrm/ obj-$(CONFIG_DRM_PL111) += pl111/ +obj-$(CONFIG_DRM_TVE200) += tve200/ diff --git a/drivers/gpu/drm/tve200/Kconfig b/drivers/gpu/drm/tve200/Kconfig new file mode 100644 index 000000000000..21d9841ddb88 --- /dev/null +++ b/drivers/gpu/drm/tve200/Kconfig @@ -0,0 +1,15 @@ +config DRM_TVE200 + tristate "DRM Support for Faraday TV Encoder TVE200" + depends on DRM + depends on CMA + depends on ARM || COMPILE_TEST + depends on OF + select DRM_PANEL + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_GEM_CMA_HELPER + select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE + help + Choose this option for DRM support for the Faraday TV Encoder + TVE200 Controller. + If M is selected the module will be called tve200_drm. diff --git a/drivers/gpu/drm/tve200/Makefile b/drivers/gpu/drm/tve200/Makefile new file mode 100644 index 000000000000..a9dba54f7ee5 --- /dev/null +++ b/drivers/gpu/drm/tve200/Makefile @@ -0,0 +1,5 @@ +tve200_drm-y += tve200_connector.o \ + tve200_display.o \ + tve200_drv.o + +obj-$(CONFIG_DRM_TVE200) += tve200_drm.o diff --git a/drivers/gpu/drm/tve200/tve200_connector.c b/drivers/gpu/drm/tve200/tve200_connector.c new file mode 100644 index 000000000000..5e6c20b57d6d --- /dev/null +++ b/drivers/gpu/drm/tve200/tve200_connector.c @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Parts of this file were based on sources as follows: + * + * Copyright (C) 2006-2008 Intel Corporation + * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com> + * Copyright (C) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2017 Eric Anholt + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + */ + +/** + * tve200_drm_connector.c + * Implementation of the connector functions for the Faraday TV Encoder + */ +#include <linux/version.h> +#include <linux/shmem_fs.h> +#include <linux/dma-buf.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> + +#include "tve200_drm.h" + +static void tve200_connector_destroy(struct drm_connector *connector) +{ + struct tve200_drm_connector *tve200con = + to_tve200_connector(connector); + + if (tve200con->panel) + drm_panel_detach(tve200con->panel); + + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +static enum drm_connector_status tve200_connector_detect(struct drm_connector + *connector, bool force) +{ + struct tve200_drm_connector *tve200con = + to_tve200_connector(connector); + + return (tve200con->panel ? + connector_status_connected : + connector_status_disconnected); +} + +static int tve200_connector_helper_get_modes(struct drm_connector *connector) +{ + struct tve200_drm_connector *tve200con = + to_tve200_connector(connector); + + if (!tve200con->panel) + return 0; + + return drm_panel_get_modes(tve200con->panel); +} + +static const struct drm_connector_funcs connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = tve200_connector_destroy, + .detect = tve200_connector_detect, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static const struct drm_connector_helper_funcs connector_helper_funcs = { + .get_modes = tve200_connector_helper_get_modes, +}; + +/* + * Walks the OF graph to find the panel node and then asks DRM to look + * up the panel. + */ +static struct drm_panel *tve200_get_panel(struct device *dev) +{ + struct device_node *endpoint, *panel_node; + struct device_node *np = dev->of_node; + struct drm_panel *panel; + + endpoint = of_graph_get_next_endpoint(np, NULL); + if (!endpoint) { + dev_err(dev, "no endpoint to fetch panel\n"); + return NULL; + } + + /* Don't proceed if we have an endpoint but no panel_node tied to it */ + panel_node = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + if (!panel_node) { + dev_err(dev, "no valid panel node\n"); + return NULL; + } + + panel = of_drm_find_panel(panel_node); + of_node_put(panel_node); + + return panel; +} + +int tve200_connector_init(struct drm_device *dev) +{ + struct tve200_drm_dev_private *priv = dev->dev_private; + struct tve200_drm_connector *tve200con = &priv->connector; + struct drm_connector *connector = &tve200con->connector; + + drm_connector_init(dev, connector, &connector_funcs, + DRM_MODE_CONNECTOR_DPI); + drm_connector_helper_add(connector, &connector_helper_funcs); + + tve200con->panel = tve200_get_panel(dev->dev); + if (tve200con->panel) + drm_panel_attach(tve200con->panel, connector); + + return 0; +} diff --git a/drivers/gpu/drm/tve200/tve200_display.c b/drivers/gpu/drm/tve200/tve200_display.c new file mode 100644 index 000000000000..37fb333331f3 --- /dev/null +++ b/drivers/gpu/drm/tve200/tve200_display.c @@ -0,0 +1,344 @@ +/* + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Parts of this file were based on sources as follows: + * + * Copyright (C) 2006-2008 Intel Corporation + * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com> + * Copyright (C) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2017 Eric Anholt + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + */ +#include <linux/clk.h> +#include <linux/version.h> +#include <linux/dma-buf.h> +#include <linux/of_graph.h> + +#include <drm/drmP.h> +#include <drm/drm_panel.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_fb_cma_helper.h> + +#include "tve200_drm.h" + +irqreturn_t tve200_irq(int irq, void *data) +{ + struct tve200_drm_dev_private *priv = data; + u32 stat; + u32 val; + + stat = readl(priv->regs + TVE200_INT_STAT); + + if (!stat) + return IRQ_NONE; + + /* + * Vblank IRQ + * + * The hardware is a bit tilted: the line stays high after clearing + * the vblank IRQ, firing many more interrupts. We counter this + * by toggling the IRQ back and forth from firing at vblank and + * firing at start of active image, which works around the problem + * since those occur strictly in sequence, and we get two IRQs for each + * frame, one at start of Vblank (that we make call into the CRTC) and + * another one at the start of the image (that we discard). + */ + if (stat & TVE200_INT_V_STATUS) { + val = readl(priv->regs + TVE200_CTRL); + /* We have an actual start of vsync */ + if (!(val & TVE200_VSTSTYPE_BITS)) { + drm_crtc_handle_vblank(&priv->pipe.crtc); + /* Toggle trigger to start of active image */ + val |= TVE200_VSTSTYPE_VAI; + } else { + /* Toggle trigger back to start of vsync */ + val &= ~TVE200_VSTSTYPE_BITS; + } + writel(val, priv->regs + TVE200_CTRL); + } else + dev_err(priv->drm->dev, "stray IRQ %08x\n", stat); + + /* Clear the interrupt once done */ + writel(stat, priv->regs + TVE200_INT_CLR); + + return IRQ_HANDLED; +} + +static int tve200_display_check(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *pstate, + struct drm_crtc_state *cstate) +{ + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *old_fb = pipe->plane.state->fb; + struct drm_framebuffer *fb = pstate->fb; + + /* + * We support these specific resolutions and nothing else. + */ + if (!(mode->hdisplay == 352 && mode->vdisplay == 240) && /* SIF(525) */ + !(mode->hdisplay == 352 && mode->vdisplay == 288) && /* CIF(625) */ + !(mode->hdisplay == 640 && mode->vdisplay == 480) && /* VGA */ + !(mode->hdisplay == 720 && mode->vdisplay == 480) && /* D1 */ + !(mode->hdisplay == 720 && mode->vdisplay == 576)) { /* D1 */ + DRM_DEBUG_KMS("unsupported display mode (%u x %u)\n", + mode->hdisplay, mode->vdisplay); + return -EINVAL; + } + + if (fb) { + u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0); + + /* FB base address must be dword aligned. */ + if (offset & 3) { + DRM_DEBUG_KMS("FB not 32-bit aligned\n"); + return -EINVAL; + } + + /* + * There's no pitch register, the mode's hdisplay + * controls this. + */ + if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) { + DRM_DEBUG_KMS("can't handle pitches\n"); + return -EINVAL; + } + + /* + * We can't change the FB format in a flicker-free + * manner (and only update it during CRTC enable). + */ + if (old_fb && old_fb->format != fb->format) + cstate->mode_changed = true; + } + + return 0; +} + +static void tve200_display_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *cstate) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_plane *plane = &pipe->plane; + struct drm_device *drm = crtc->dev; + struct tve200_drm_dev_private *priv = drm->dev_private; + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *fb = plane->state->fb; + struct drm_connector *connector = &priv->connector.connector; + u32 format = fb->format->format; + u32 ctrl1 = 0; + + clk_prepare_enable(priv->clk); + + /* Function 1 */ + ctrl1 |= TVE200_CTRL_CSMODE; + /* Interlace mode for CCIR656: parameterize? */ + ctrl1 |= TVE200_CTRL_NONINTERLACE; + /* 32 words per burst */ + ctrl1 |= TVE200_CTRL_BURST_32_WORDS; + /* 16 retries */ + ctrl1 |= TVE200_CTRL_RETRYCNT_16; + /* NTSC mode: parametrize? */ + ctrl1 |= TVE200_CTRL_NTSC; + + /* Vsync IRQ at start of Vsync at first */ + ctrl1 |= TVE200_VSTSTYPE_VSYNC; + + if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) + ctrl1 |= TVE200_CTRL_TVCLKP; + + if ((mode->hdisplay == 352 && mode->vdisplay == 240) || /* SIF(525) */ + (mode->hdisplay == 352 && mode->vdisplay == 288)) { /* CIF(625) */ + ctrl1 |= TVE200_CTRL_IPRESOL_CIF; + dev_info(drm->dev, "CIF mode\n"); + } else if (mode->hdisplay == 640 && mode->vdisplay == 480) { + ctrl1 |= TVE200_CTRL_IPRESOL_VGA; + dev_info(drm->dev, "VGA mode\n"); + } else if ((mode->hdisplay == 720 && mode->vdisplay == 480) || + (mode->hdisplay == 720 && mode->vdisplay == 576)) { + ctrl1 |= TVE200_CTRL_IPRESOL_D1; + dev_info(drm->dev, "D1 mode\n"); + } + + if (format & DRM_FORMAT_BIG_ENDIAN) { + ctrl1 |= TVE200_CTRL_BBBP; + format &= ~DRM_FORMAT_BIG_ENDIAN; + } + + switch (format) { + case DRM_FORMAT_XRGB8888: + ctrl1 |= TVE200_IPDMOD_RGB888; + break; + case DRM_FORMAT_RGB565: + ctrl1 |= TVE200_IPDMOD_RGB565; + break; + case DRM_FORMAT_XRGB1555: + ctrl1 |= TVE200_IPDMOD_RGB555; + break; + case DRM_FORMAT_XBGR8888: + ctrl1 |= TVE200_IPDMOD_RGB888 | TVE200_BGR; + break; + case DRM_FORMAT_BGR565: + ctrl1 |= TVE200_IPDMOD_RGB565 | TVE200_BGR; + break; + case DRM_FORMAT_XBGR1555: + ctrl1 |= TVE200_IPDMOD_RGB555 | TVE200_BGR; + break; + case DRM_FORMAT_YUYV: + ctrl1 |= TVE200_IPDMOD_YUV422; + ctrl1 |= TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0; + break; + case DRM_FORMAT_YVYU: + ctrl1 |= TVE200_IPDMOD_YUV422; + ctrl1 |= TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0; + break; + case DRM_FORMAT_UYVY: + ctrl1 |= TVE200_IPDMOD_YUV422; + ctrl1 |= TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0; + break; + case DRM_FORMAT_VYUY: + ctrl1 |= TVE200_IPDMOD_YUV422; + ctrl1 |= TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0; + break; + case DRM_FORMAT_YUV420: + ctrl1 |= TVE200_CTRL_YUV420; + ctrl1 |= TVE200_IPDMOD_YUV420; + break; + default: + dev_err(drm->dev, "Unknown FB format 0x%08x\n", + fb->format->format); + break; + } + + ctrl1 |= TVE200_TVEEN; + + drm_panel_prepare(priv->connector.panel); + + /* Turn it on */ + writel(ctrl1, priv->regs + TVE200_CTRL); + + drm_panel_enable(priv->connector.panel); + + drm_crtc_vblank_on(crtc); +} + +void tve200_display_disable(struct drm_simple_display_pipe *pipe) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct tve200_drm_dev_private *priv = drm->dev_private; + + drm_crtc_vblank_off(crtc); + + drm_panel_disable(priv->connector.panel); + + /* Disable and Power Down */ + writel(0, priv->regs + TVE200_CTRL); + + drm_panel_unprepare(priv->connector.panel); + + clk_disable_unprepare(priv->clk); +} + +static void tve200_display_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_pstate) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct tve200_drm_dev_private *priv = drm->dev_private; + struct drm_pending_vblank_event *event = crtc->state->event; + struct drm_plane *plane = &pipe->plane; + struct drm_plane_state *pstate = plane->state; + struct drm_framebuffer *fb = pstate->fb; + + if (fb) { + /* For RGB, the Y component is used as base address */ + writel(drm_fb_cma_get_gem_addr(fb, pstate, 0), + priv->regs + TVE200_Y_FRAME_BASE_ADDR); + + /* For three plane YUV we need two more addresses */ + if (fb->format->format == DRM_FORMAT_YUV420) { + writel(drm_fb_cma_get_gem_addr(fb, pstate, 1), + priv->regs + TVE200_U_FRAME_BASE_ADDR); + writel(drm_fb_cma_get_gem_addr(fb, pstate, 2), + priv->regs + TVE200_V_FRAME_BASE_ADDR); + } + } + + if (event) { + crtc->state->event = NULL; + + spin_lock_irq(&crtc->dev->event_lock); + if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0) + drm_crtc_arm_vblank_event(crtc, event); + else + drm_crtc_send_vblank_event(crtc, event); + spin_unlock_irq(&crtc->dev->event_lock); + } +} + +int tve200_enable_vblank(struct drm_device *drm, unsigned int crtc) +{ + struct tve200_drm_dev_private *priv = drm->dev_private; + + writel(TVE200_INT_V_STATUS, priv->regs + TVE200_INT_EN); + return 0; +} + +void tve200_disable_vblank(struct drm_device *drm, unsigned int crtc) +{ + struct tve200_drm_dev_private *priv = drm->dev_private; + + writel(0, priv->regs + TVE200_INT_EN); +} + +static int tve200_display_prepare_fb(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state) +{ + return drm_fb_cma_prepare_fb(&pipe->plane, plane_state); +} + +const struct drm_simple_display_pipe_funcs tve200_display_funcs = { + .check = tve200_display_check, + .enable = tve200_display_enable, + .disable = tve200_display_disable, + .update = tve200_display_update, + .prepare_fb = tve200_display_prepare_fb, +}; + +int tve200_display_init(struct drm_device *drm) +{ + struct tve200_drm_dev_private *priv = drm->dev_private; + int ret; + static const u32 formats[] = { + DRM_FORMAT_XRGB8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_RGB565, + DRM_FORMAT_BGR565, + DRM_FORMAT_XRGB1555, + DRM_FORMAT_XBGR1555, + /* + * The controller actually supports any YCbCr ordering, + * for packed YCbCr. This just lists the orderings that + * DRM supports. + */ + DRM_FORMAT_YUYV, + DRM_FORMAT_YVYU, + DRM_FORMAT_UYVY, + DRM_FORMAT_VYUY, + /* This uses three planes */ + DRM_FORMAT_YUV420, + }; + + ret = drm_simple_display_pipe_init(drm, &priv->pipe, + &tve200_display_funcs, + formats, ARRAY_SIZE(formats), + &priv->connector.connector); + if (ret) + return ret; + + return 0; +} diff --git a/drivers/gpu/drm/tve200/tve200_drm.h b/drivers/gpu/drm/tve200/tve200_drm.h new file mode 100644 index 000000000000..f00fc47a6bd1 --- /dev/null +++ b/drivers/gpu/drm/tve200/tve200_drm.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Parts of this file were based on sources as follows: + * + * Copyright (C) 2006-2008 Intel Corporation + * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com> + * Copyright (C) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2017 Eric Anholt + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + */ + +#ifndef _TVE200_DRM_H_ +#define _TVE200_DRM_H_ + +/* Bits 2-31 are valid physical base addresses */ +#define TVE200_Y_FRAME_BASE_ADDR 0x00 +#define TVE200_U_FRAME_BASE_ADDR 0x04 +#define TVE200_V_FRAME_BASE_ADDR 0x08 + +#define TVE200_INT_EN 0x0C +#define TVE200_INT_CLR 0x10 +#define TVE200_INT_STAT 0x14 +#define TVE200_INT_BUS_ERR BIT(7) +#define TVE200_INT_V_STATUS BIT(6) /* vertical blank */ +#define TVE200_INT_V_NEXT_FRAME BIT(5) +#define TVE200_INT_U_NEXT_FRAME BIT(4) +#define TVE200_INT_Y_NEXT_FRAME BIT(3) +#define TVE200_INT_V_FIFO_UNDERRUN BIT(2) +#define TVE200_INT_U_FIFO_UNDERRUN BIT(1) +#define TVE200_INT_Y_FIFO_UNDERRUN BIT(0) +#define TVE200_FIFO_UNDERRUNS (TVE200_INT_V_FIFO_UNDERRUN | \ + TVE200_INT_U_FIFO_UNDERRUN | \ + TVE200_INT_Y_FIFO_UNDERRUN) + +#define TVE200_CTRL 0x18 +#define TVE200_CTRL_YUV420 BIT(31) +#define TVE200_CTRL_CSMODE BIT(30) +#define TVE200_CTRL_NONINTERLACE BIT(28) /* 0 = non-interlace CCIR656 */ +#define TVE200_CTRL_TVCLKP BIT(27) /* Inverted clock phase */ +/* Bits 24..26 define the burst size after arbitration on the bus */ +#define TVE200_CTRL_BURST_4_WORDS (0 << 24) +#define TVE200_CTRL_BURST_8_WORDS (1 << 24) +#define TVE200_CTRL_BURST_16_WORDS (2 << 24) +#define TVE200_CTRL_BURST_32_WORDS (3 << 24) +#define TVE200_CTRL_BURST_64_WORDS (4 << 24) +#define TVE200_CTRL_BURST_128_WORDS (5 << 24) +#define TVE200_CTRL_BURST_256_WORDS (6 << 24) +#define TVE200_CTRL_BURST_0_WORDS (7 << 24) /* ? */ +/* + * Bits 16..23 is the retry count*16 before issueing a new AHB transfer + * on the AHB bus. + */ +#define TVE200_CTRL_RETRYCNT_MASK GENMASK(23, 16) +#define TVE200_CTRL_RETRYCNT_16 (1 << 16) +#define TVE200_CTRL_BBBP BIT(15) /* 0 = little-endian */ +/* Bits 12..14 define the YCbCr ordering */ +#define TVE200_CTRL_YCBCRODR_CB0Y0CR0Y1 (0 << 12) +#define TVE200_CTRL_YCBCRODR_Y0CB0Y1CR0 (1 << 12) +#define TVE200_CTRL_YCBCRODR_CR0Y0CB0Y1 (2 << 12) +#define TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0 (3 << 12) +#define TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0 (4 << 12) +#define TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0 (5 << 12) +#define TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0 (6 << 12) +#define TVE200_CTRL_YCBCRODR_Y0CR0Y1CB0 (7 << 12) +/* Bits 10..11 define the input resolution (framebuffer size) */ +#define TVE200_CTRL_IPRESOL_CIF (0 << 10) +#define TVE200_CTRL_IPRESOL_VGA (1 << 10) +#define TVE200_CTRL_IPRESOL_D1 (2 << 10) +#define TVE200_CTRL_NTSC BIT(9) /* 0 = PAL, 1 = NTSC */ +#define TVE200_CTRL_INTERLACE BIT(8) /* 1 = interlace, only for D1 */ +#define TVE200_IPDMOD_RGB555 (0 << 6) /* TVE200_CTRL_YUV420 = 0 */ +#define TVE200_IPDMOD_RGB565 (1 << 6) +#define TVE200_IPDMOD_RGB888 (2 << 6) +#define TVE200_IPDMOD_YUV420 (2 << 6) /* TVE200_CTRL_YUV420 = 1 */ +#define TVE200_IPDMOD_YUV422 (3 << 6) +/* Bits 4 & 5 define when to fire the vblank IRQ */ +#define TVE200_VSTSTYPE_VSYNC (0 << 4) /* start of vsync */ +#define TVE200_VSTSTYPE_VBP (1 << 4) /* start of v back porch */ +#define TVE200_VSTSTYPE_VAI (2 << 4) /* start of v active image */ +#define TVE200_VSTSTYPE_VFP (3 << 4) /* start of v front porch */ +#define TVE200_VSTSTYPE_BITS (BIT(4) | BIT(5)) +#define TVE200_BGR BIT(1) /* 0 = RGB, 1 = BGR */ +#define TVE200_TVEEN BIT(0) /* Enable TVE block */ + +#define TVE200_CTRL_2 0x1c +#define TVE200_CTRL_3 0x20 + +#define TVE200_CTRL_4 0x24 +#define TVE200_CTRL_4_RESET BIT(0) /* triggers reset of TVE200 */ + +#include <drm/drm_gem.h> +#include <drm/drm_simple_kms_helper.h> + +struct tve200_drm_connector { + struct drm_connector connector; + struct drm_panel *panel; +}; + +struct tve200_drm_dev_private { + struct drm_device *drm; + + struct tve200_drm_connector connector; + struct drm_simple_display_pipe pipe; + struct drm_fbdev_cma *fbdev; + + void *regs; + struct clk *pclk; + struct clk *clk; +}; + +#define to_tve200_connector(x) \ + container_of(x, struct tve200_drm_connector, connector) + +int tve200_display_init(struct drm_device *dev); +int tve200_enable_vblank(struct drm_device *drm, unsigned int crtc); +void tve200_disable_vblank(struct drm_device *drm, unsigned int crtc); +irqreturn_t tve200_irq(int irq, void *data); +int tve200_connector_init(struct drm_device *dev); +int tve200_encoder_init(struct drm_device *dev); +int tve200_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif /* _TVE200_DRM_H_ */ diff --git a/drivers/gpu/drm/tve200/tve200_drv.c b/drivers/gpu/drm/tve200/tve200_drv.c new file mode 100644 index 000000000000..fe742106db4e --- /dev/null +++ b/drivers/gpu/drm/tve200/tve200_drv.c @@ -0,0 +1,278 @@ +/* + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Parts of this file were based on sources as follows: + * + * Copyright (C) 2006-2008 Intel Corporation + * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com> + * Copyright (C) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2017 Eric Anholt + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + */ + +/** + * DOC: Faraday TV Encoder TVE200 DRM Driver + * + * The Faraday TV Encoder TVE200 is also known as the Gemini TV Interface + * Controller (TVC) and is found in the Gemini Chipset from Storlink + * Semiconductor (later Storm Semiconductor, later Cortina Systems) + * but also in the Grain Media GM8180 chipset. On the Gemini the module + * is connected to 8 data lines and a single clock line, comprising an + * 8-bit BT.656 interface. + * + * This is a very basic YUV display driver. The datasheet specifies that + * it supports the ITU BT.656 standard. It requires a 27 MHz clock which is + * the hallmark of any TV encoder supporting both PAL and NTSC. + * + * This driver exposes a standard KMS interface for this TV encoder. + */ + +#include <linux/clk.h> +#include <linux/dma-buf.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/shmem_fs.h> +#include <linux/slab.h> +#include <linux/version.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_fb_cma_helper.h> +#include <drm/drm_panel.h> + +#include "tve200_drm.h" + +#define DRIVER_DESC "DRM module for Faraday TVE200" + +static const struct drm_mode_config_funcs mode_config_funcs = { + .fb_create = drm_fb_cma_create, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +static int tve200_modeset_init(struct drm_device *dev) +{ + struct drm_mode_config *mode_config; + struct tve200_drm_dev_private *priv = dev->dev_private; + int ret = 0; + + drm_mode_config_init(dev); + mode_config = &dev->mode_config; + mode_config->funcs = &mode_config_funcs; + mode_config->min_width = 352; + mode_config->max_width = 720; + mode_config->min_height = 240; + mode_config->max_height = 576; + + ret = tve200_connector_init(dev); + if (ret) { + dev_err(dev->dev, "Failed to create tve200_drm_connector\n"); + goto out_config; + } + + /* + * Don't actually attach if we didn't find a drm_panel + * attached to us. + */ + if (!priv->connector.panel) { + dev_info(dev->dev, + "deferring due to lack of DRM panel device\n"); + ret = -EPROBE_DEFER; + goto out_config; + } + dev_info(dev->dev, "attached to panel %s\n", + dev_name(priv->connector.panel->dev)); + + ret = tve200_display_init(dev); + if (ret) { + dev_err(dev->dev, "failed to init display\n"); + goto out_config; + } + + ret = drm_vblank_init(dev, 1); + if (ret) { + dev_err(dev->dev, "failed to init vblank\n"); + goto out_config; + } + + drm_mode_config_reset(dev); + + /* + * Passing in 16 here will make the RGB656 mode the default + * Passing in 32 will use XRGB8888 mode + */ + priv->fbdev = drm_fbdev_cma_init(dev, 16, + dev->mode_config.num_connector); + drm_kms_helper_poll_init(dev); + + goto finish; + +out_config: + drm_mode_config_cleanup(dev); +finish: + return ret; +} + +DEFINE_DRM_GEM_CMA_FOPS(drm_fops); + +static void tve200_lastclose(struct drm_device *dev) +{ + struct tve200_drm_dev_private *priv = dev->dev_private; + + drm_fbdev_cma_restore_mode(priv->fbdev); +} + +static struct drm_driver tve200_drm_driver = { + .driver_features = + DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | DRIVER_ATOMIC, + .lastclose = tve200_lastclose, + .ioctls = NULL, + .fops = &drm_fops, + .name = "tve200", + .desc = DRIVER_DESC, + .date = "20170703", + .major = 1, + .minor = 0, + .patchlevel = 0, + .dumb_create = drm_gem_cma_dumb_create, + .gem_free_object_unlocked = drm_gem_cma_free_object, + .gem_vm_ops = &drm_gem_cma_vm_ops, + + .enable_vblank = tve200_enable_vblank, + .disable_vblank = tve200_disable_vblank, + + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_import = drm_gem_prime_import, + .gem_prime_export = drm_gem_prime_export, + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, + .gem_prime_vmap = drm_gem_cma_prime_vmap, + .gem_prime_vunmap = drm_gem_cma_prime_vunmap, + .gem_prime_mmap = drm_gem_cma_prime_mmap, +}; + +static int tve200_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct tve200_drm_dev_private *priv; + struct drm_device *drm; + struct resource *res; + int irq; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + drm = drm_dev_alloc(&tve200_drm_driver, dev); + if (IS_ERR(drm)) + return PTR_ERR(drm); + platform_set_drvdata(pdev, drm); + priv->drm = drm; + drm->dev_private = priv; + + /* Clock the silicon so we can access the registers */ + priv->pclk = devm_clk_get(dev, "PCLK"); + if (IS_ERR(priv->pclk)) { + dev_err(dev, "unable to get PCLK\n"); + ret = PTR_ERR(priv->pclk); + goto dev_unref; + } + ret = clk_prepare_enable(priv->pclk); + if (ret) { + dev_err(dev, "failed to enable PCLK\n"); + goto dev_unref; + } + + /* This clock is for the pixels (27MHz) */ + priv->clk = devm_clk_get(dev, "TVE"); + if (IS_ERR(priv->clk)) { + dev_err(dev, "unable to get TVE clock\n"); + ret = PTR_ERR(priv->clk); + goto clk_disable; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(dev, res); + if (!priv->regs) { + dev_err(dev, "%s failed mmio\n", __func__); + ret = -EINVAL; + goto clk_disable; + } + + irq = platform_get_irq(pdev, 0); + if (!irq) { + ret = -EINVAL; + goto clk_disable; + } + + /* turn off interrupts before requesting the irq */ + writel(0, priv->regs + TVE200_INT_EN); + + ret = devm_request_irq(dev, irq, tve200_irq, 0, "tve200", priv); + if (ret) { + dev_err(dev, "failed to request irq %d\n", ret); + goto clk_disable; + } + + ret = tve200_modeset_init(drm); + if (ret) + goto clk_disable; + + ret = drm_dev_register(drm, 0); + if (ret < 0) + goto clk_disable; + + return 0; + +clk_disable: + clk_disable_unprepare(priv->pclk); +dev_unref: + drm_dev_unref(drm); + return ret; +} + +static int tve200_remove(struct platform_device *pdev) +{ + struct drm_device *drm = platform_get_drvdata(pdev); + struct tve200_drm_dev_private *priv = drm->dev_private; + + drm_dev_unregister(drm); + if (priv->fbdev) + drm_fbdev_cma_fini(priv->fbdev); + drm_mode_config_cleanup(drm); + clk_disable_unprepare(priv->pclk); + drm_dev_unref(drm); + + return 0; +} + +static const struct of_device_id tve200_of_match[] = { + { + .compatible = "faraday,tve200", + }, + {}, +}; + +static struct platform_driver tve200_driver = { + .driver = { + .name = "tve200", + .of_match_table = of_match_ptr(tve200_of_match), + }, + .probe = tve200_probe, + .remove = tve200_remove, +}; +module_platform_driver(tve200_driver); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_LICENSE("GPL"); |