diff options
| -rw-r--r-- | drivers/iio/accel/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/iio/accel/Makefile | 3 | ||||
| -rw-r--r-- | drivers/iio/accel/bmc150-accel-core.c (renamed from drivers/iio/accel/bmc150-accel.c) | 86 | ||||
| -rw-r--r-- | drivers/iio/accel/bmc150-accel-i2c.c | 102 | ||||
| -rw-r--r-- | drivers/iio/accel/bmc150-accel.h | 20 |
5 files changed, 146 insertions, 74 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index dd3e293c619b..bb00770b63bd 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -19,21 +19,22 @@ config BMA180 config BMC150_ACCEL tristate "Bosch BMC150 Accelerometer Driver" - depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER select REGMAP - select REGMAP_I2C + select BMC150_ACCEL_I2C if I2C help Say yes here to build support for the following Bosch accelerometers: BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280. - Currently this only supports the device via an i2c interface. - This is a combo module with both accelerometer and magnetometer. This driver is only implementing accelerometer part, which has its own address and register map. +config BMC150_ACCEL_I2C + tristate + select REGMAP_I2C + config HID_SENSOR_ACCEL_3D depends on HID_SENSOR_HUB select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 020dda0ae508..80764363f7b8 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -4,7 +4,8 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMA180) += bma180.o -obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o +obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o +obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel-core.c index 85b81967dcaa..2d33f1e821db 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -37,6 +37,8 @@ #include <linux/iio/triggered_buffer.h> #include <linux/regmap.h> +#include "bmc150-accel.h" + #define BMC150_ACCEL_DRV_NAME "bmc150_accel" #define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event" @@ -1014,15 +1016,6 @@ static const struct iio_chan_spec bmc150_accel_channels[] = static const struct iio_chan_spec bma280_accel_channels[] = BMC150_ACCEL_CHANNELS(14); -enum { - bmc150, - bmi055, - bma255, - bma250e, - bma222e, - bma280, -}; - static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = { [bmc150] = { .name = "BMC150A", @@ -1553,33 +1546,23 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) return 0; } -static int bmc150_accel_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name, bool block_supported) { struct bmc150_accel_data *data; struct iio_dev *indio_dev; int ret; - const char *name = NULL; - struct device *dev; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); - i2c_set_clientdata(client, indio_dev); - data->dev = &client->dev; - dev = &client->dev; - data->irq = client->irq; - - data->regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf); - if (IS_ERR(data->regmap)) { - dev_err(dev, "Failed to initialize i2c regmap\n"); - return PTR_ERR(data->regmap); - } + dev_set_drvdata(dev, indio_dev); + data->dev = dev; + data->irq = irq; - if (id) - name = id->name; + data->regmap = regmap; ret = bmc150_accel_chip_init(data); if (ret < 0) @@ -1633,9 +1616,7 @@ static int bmc150_accel_probe(struct i2c_client *client, if (ret) goto err_buffer_cleanup; - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) || - i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + if (block_supported) { indio_dev->modes |= INDIO_BUFFER_SOFTWARE; indio_dev->info = &bmc150_accel_info_fifo; indio_dev->buffer->attrs = bmc150_accel_fifo_attributes; @@ -1644,7 +1625,7 @@ static int bmc150_accel_probe(struct i2c_client *client, ret = iio_device_register(indio_dev); if (ret < 0) { - dev_err(data->dev, "Unable to register iio device\n"); + dev_err(dev, "Unable to register iio device\n"); goto err_trigger_unregister; } @@ -1667,10 +1648,11 @@ err_buffer_cleanup: return ret; } +EXPORT_SYMBOL_GPL(bmc150_accel_core_probe); -static int bmc150_accel_remove(struct i2c_client *client) +int bmc150_accel_core_remove(struct device *dev) { - struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmc150_accel_data *data = iio_priv(indio_dev); pm_runtime_disable(data->dev); @@ -1689,6 +1671,7 @@ static int bmc150_accel_remove(struct i2c_client *client) return 0; } +EXPORT_SYMBOL_GPL(bmc150_accel_core_remove); #ifdef CONFIG_PM_SLEEP static int bmc150_accel_suspend(struct device *dev) @@ -1759,47 +1742,12 @@ static int bmc150_accel_runtime_resume(struct device *dev) } #endif -static const struct dev_pm_ops bmc150_accel_pm_ops = { +const struct dev_pm_ops bmc150_accel_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume) SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend, bmc150_accel_runtime_resume, NULL) }; - -static const struct acpi_device_id bmc150_accel_acpi_match[] = { - {"BSBA0150", bmc150}, - {"BMC150A", bmc150}, - {"BMI055A", bmi055}, - {"BMA0255", bma255}, - {"BMA250E", bma250e}, - {"BMA222E", bma222e}, - {"BMA0280", bma280}, - { }, -}; -MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match); - -static const struct i2c_device_id bmc150_accel_id[] = { - {"bmc150_accel", bmc150}, - {"bmi055_accel", bmi055}, - {"bma255", bma255}, - {"bma250e", bma250e}, - {"bma222e", bma222e}, - {"bma280", bma280}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, bmc150_accel_id); - -static struct i2c_driver bmc150_accel_driver = { - .driver = { - .name = BMC150_ACCEL_DRV_NAME, - .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match), - .pm = &bmc150_accel_pm_ops, - }, - .probe = bmc150_accel_probe, - .remove = bmc150_accel_remove, - .id_table = bmc150_accel_id, -}; -module_i2c_driver(bmc150_accel_driver); +EXPORT_SYMBOL_GPL(bmc150_accel_pm_ops); MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c new file mode 100644 index 000000000000..b41404ba32fc --- /dev/null +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -0,0 +1,102 @@ +/* + * 3-axis accelerometer driver supporting following I2C Bosch-Sensortec chips: + * - BMC150 + * - BMI055 + * - BMA255 + * - BMA250E + * - BMA222E + * - BMA280 + * + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/regmap.h> + +#include "bmc150-accel.h" + +static const struct regmap_config bmc150_i2c_regmap_conf = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int bmc150_accel_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + const char *name = NULL; + bool block_supported = + i2c_check_functionality(client->adapter, I2C_FUNC_I2C) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK); + + regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to initialize i2c regmap\n"); + return PTR_ERR(regmap); + } + + if (id) + name = id->name; + + return bmc150_accel_core_probe(&client->dev, regmap, client->irq, name, + block_supported); +} + +static int bmc150_accel_remove(struct i2c_client *client) +{ + return bmc150_accel_core_remove(&client->dev); +} + +static const struct acpi_device_id bmc150_accel_acpi_match[] = { + {"BSBA0150", bmc150}, + {"BMC150A", bmc150}, + {"BMI055A", bmi055}, + {"BMA0255", bma255}, + {"BMA250E", bma250e}, + {"BMA222E", bma222e}, + {"BMA0280", bma280}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match); + +static const struct i2c_device_id bmc150_accel_id[] = { + {"bmc150_accel", bmc150}, + {"bmi055_accel", bmi055}, + {"bma255", bma255}, + {"bma250e", bma250e}, + {"bma222e", bma222e}, + {"bma280", bma280}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, bmc150_accel_id); + +static struct i2c_driver bmc150_accel_driver = { + .driver = { + .name = "bmc150_accel_i2c", + .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match), + .pm = &bmc150_accel_pm_ops, + }, + .probe = bmc150_accel_probe, + .remove = bmc150_accel_remove, + .id_table = bmc150_accel_id, +}; +module_i2c_driver(bmc150_accel_driver); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("BMC150 I2C accelerometer driver"); diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h new file mode 100644 index 000000000000..ba0335987f94 --- /dev/null +++ b/drivers/iio/accel/bmc150-accel.h @@ -0,0 +1,20 @@ +#ifndef _BMC150_ACCEL_H_ +#define _BMC150_ACCEL_H_ + +struct regmap; + +enum { + bmc150, + bmi055, + bma255, + bma250e, + bma222e, + bma280, +}; + +int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name, bool block_supported); +int bmc150_accel_core_remove(struct device *dev); +extern const struct dev_pm_ops bmc150_accel_pm_ops; + +#endif /* _BMC150_ACCEL_H_ */ |