diff options
| -rw-r--r-- | drivers/phy/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/phy-qcom-ufs-i.h | 118 | ||||
| -rw-r--r-- | drivers/phy/phy-qcom-ufs.c | 745 |
4 files changed, 871 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index ccad8809ecb1..26a7623e551e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -277,4 +277,11 @@ config PHY_STIH41X_USB Enable this to support the USB transceiver that is part of STMicroelectronics STiH41x SoC series. +config PHY_QCOM_UFS + tristate "Qualcomm UFS PHY driver" + depends on OF && ARCH_MSM + select GENERIC_PHY + help + Support for UFS PHY on QCOM chipsets. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index aa74f961e44e..335965d3a9b7 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -34,3 +34,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h new file mode 100644 index 000000000000..dac200f4d639 --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-i.h @@ -0,0 +1,118 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_I_H_ +#define UFS_QCOM_PHY_I_H_ + +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/delay.h> + +#define UFS_QCOM_PHY_NAME_LEN 30 + +struct ufs_qcom_phy_calibration { + u32 reg_offset; + u32 cfg_value; +}; + +struct ufs_qcom_phy_vreg { + const char *name; + struct regulator *reg; + int max_uA; + int min_uV; + int max_uV; + bool enabled; + bool is_always_on; +}; + +struct ufs_qcom_phy { + struct list_head list; + struct device *dev; + void __iomem *mmio; + void __iomem *dev_ref_clk_ctrl_mmio; + struct clk *tx_iface_clk; + struct clk *rx_iface_clk; + bool is_iface_clk_enabled; + struct clk *ref_clk_src; + struct clk *ref_clk_parent; + struct clk *ref_clk; + bool is_ref_clk_enabled; + bool is_dev_ref_clk_enabled; + struct ufs_qcom_phy_vreg vdda_pll; + struct ufs_qcom_phy_vreg vdda_phy; + struct ufs_qcom_phy_vreg vddp_ref_clk; + unsigned int quirks; + + /* + * If UFS link is put into Hibern8 and if UFS PHY analog hardware is + * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8 + * exit might fail even after powering on UFS PHY analog hardware. + * Enabling this quirk will help to solve above issue by doing + * custom PHY settings just before PHY analog power collapse. + */ + #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0) + + u8 host_ctrl_rev_major; + u16 host_ctrl_rev_minor; + u16 host_ctrl_rev_step; + + char name[UFS_QCOM_PHY_NAME_LEN]; + struct ufs_qcom_phy_calibration *cached_regs; + int cached_regs_table_size; + bool is_powered_on; + struct ufs_qcom_phy_specific_ops *phy_spec_ops; +}; + +/** + * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a + * specific implementation per phy. Each UFS phy, should implement + * those functions according to its spec and requirements + * @calibrate_phy: pointer to a function that calibrate the phy + * @start_serdes: pointer to a function that starts the serdes + * @is_physical_coding_sublayer_ready: pointer to a function that + * checks pcs readiness. returns 0 for success and non-zero for error. + * @set_tx_lane_enable: pointer to a function that enable tx lanes + * @power_control: pointer to a function that controls analog rail of phy + * and writes to QSERDES_RX_SIGDET_CNTRL attribute + */ +struct ufs_qcom_phy_specific_ops { + int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B); + void (*start_serdes)(struct ufs_qcom_phy *phy); + int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy); + void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val); + void (*power_control)(struct ufs_qcom_phy *phy, bool val); +}; + +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy); +int ufs_qcom_phy_power_on(struct phy *generic_phy); +int ufs_qcom_phy_power_off(struct phy *generic_phy); +int ufs_qcom_phy_exit(struct phy *generic_phy); +int ufs_qcom_phy_init_clks(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_init_vregulators(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_remove(struct phy *generic_phy, + struct ufs_qcom_phy *ufs_qcom_phy); +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, + struct ufs_qcom_phy *common_cfg, + struct phy_ops *ufs_qcom_phy_gen_ops, + struct ufs_qcom_phy_specific_ops *phy_spec_ops); +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A, + struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B, + bool is_rate_B); +#endif diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c new file mode 100644 index 000000000000..44ee983d57fe --- /dev/null +++ b/drivers/phy/phy-qcom-ufs.c @@ -0,0 +1,745 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-i.h" + +#define MAX_PROP_NAME 32 +#define VDDA_PHY_MIN_UV 1000000 +#define VDDA_PHY_MAX_UV 1000000 +#define VDDA_PLL_MIN_UV 1800000 +#define VDDA_PLL_MAX_UV 1800000 +#define VDDP_REF_CLK_MIN_UV 1200000 +#define VDDP_REF_CLK_MAX_UV 1200000 + +static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, + const char *, bool); +static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, + const char *); +static int ufs_qcom_phy_base_init(struct platform_device *pdev, + struct ufs_qcom_phy *phy_common); + +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + struct ufs_qcom_phy_calibration *tbl_A, + int tbl_size_A, + struct ufs_qcom_phy_calibration *tbl_B, + int tbl_size_B, bool is_rate_B) +{ + int i; + int ret = 0; + + if (!tbl_A) { + dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); + ret = EINVAL; + goto out; + } + + for (i = 0; i < tbl_size_A; i++) + writel_relaxed(tbl_A[i].cfg_value, + ufs_qcom_phy->mmio + tbl_A[i].reg_offset); + + /* + * In case we would like to work in rate B, we need + * to override a registers that were configured in rate A table + * with registers of rate B table. + * table. + */ + if (is_rate_B) { + if (!tbl_B) { + dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", + __func__); + ret = EINVAL; + goto out; + } + + for (i = 0; i < tbl_size_B; i++) + writel_relaxed(tbl_B[i].cfg_value, + ufs_qcom_phy->mmio + tbl_B[i].reg_offset); + } + + /* flush buffered writes */ + mb(); + +out: + return ret; +} + +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, + struct ufs_qcom_phy *common_cfg, + struct phy_ops *ufs_qcom_phy_gen_ops, + struct ufs_qcom_phy_specific_ops *phy_spec_ops) +{ + int err; + struct device *dev = &pdev->dev; + struct phy *generic_phy = NULL; + struct phy_provider *phy_provider; + + err = ufs_qcom_phy_base_init(pdev, common_cfg); + if (err) { + dev_err(dev, "%s: phy base init failed %d\n", __func__, err); + goto out; + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + err = PTR_ERR(phy_provider); + dev_err(dev, "%s: failed to register phy %d\n", __func__, err); + goto out; + } + + generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); + if (IS_ERR(generic_phy)) { + err = PTR_ERR(generic_phy); + dev_err(dev, "%s: failed to create phy %d\n", __func__, err); + goto out; + } + + common_cfg->phy_spec_ops = phy_spec_ops; + common_cfg->dev = dev; + +out: + return generic_phy; +} + +/* + * This assumes the embedded phy structure inside generic_phy is of type + * struct ufs_qcom_phy. In order to function properly it's crucial + * to keep the embedded struct "struct ufs_qcom_phy common_cfg" + * as the first inside generic_phy. + */ +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) +{ + return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); +} + +static +int ufs_qcom_phy_base_init(struct platform_device *pdev, + struct ufs_qcom_phy *phy_common) +{ + struct device *dev = &pdev->dev; + struct resource *res; + int err = 0; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); + if (!res) { + dev_err(dev, "%s: phy_mem resource not found\n", __func__); + err = -ENOMEM; + goto out; + } + + phy_common->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR((void const *)phy_common->mmio)) { + err = PTR_ERR((void const *)phy_common->mmio); + phy_common->mmio = NULL; + dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", + __func__, err); + goto out; + } + + /* "dev_ref_clk_ctrl_mem" is optional resource */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "dev_ref_clk_ctrl_mem"); + if (!res) { + dev_dbg(dev, "%s: dev_ref_clk_ctrl_mem resource not found\n", + __func__); + goto out; + } + + phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); + if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) { + err = PTR_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio); + phy_common->dev_ref_clk_ctrl_mmio = NULL; + dev_err(dev, "%s: ioremap for dev_ref_clk_ctrl_mem resource failed %d\n", + __func__, err); + } + +out: + return err; +} + +static int __ufs_qcom_phy_clk_get(struct phy *phy, + const char *name, struct clk **clk_out, bool err_print) +{ + struct clk *clk; + int err = 0; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + if (err_print) + dev_err(dev, "failed to get %s err %d", name, err); + } else { + *clk_out = clk; + } + + return err; +} + +static +int ufs_qcom_phy_clk_get(struct phy *phy, + const char *name, struct clk **clk_out) +{ + return __ufs_qcom_phy_clk_get(phy, name, clk_out, true); +} + +int +ufs_qcom_phy_init_clks(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common) +{ + int err; + + err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk", + &phy_common->tx_iface_clk); + if (err) + goto out; + + err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk", + &phy_common->rx_iface_clk); + if (err) + goto out; + + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src", + &phy_common->ref_clk_src); + if (err) + goto out; + + /* + * "ref_clk_parent" is optional hence don't abort init if it's not + * found. + */ + __ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent", + &phy_common->ref_clk_parent, false); + + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk", + &phy_common->ref_clk); + +out: + return err; +} + +int +ufs_qcom_phy_init_vregulators(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common) +{ + int err; + + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll, + "vdda-pll"); + if (err) + goto out; + + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy, + "vdda-phy"); + + if (err) + goto out; + + /* vddp-ref-clk-* properties are optional */ + __ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk, + "vddp-ref-clk", true); +out: + return err; +} + +static int __ufs_qcom_phy_init_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional) +{ + int err = 0; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + char prop_name[MAX_PROP_NAME]; + + vreg->name = kstrdup(name, GFP_KERNEL); + if (!vreg->name) { + err = -ENOMEM; + goto out; + } + + vreg->reg = devm_regulator_get(dev, name); + if (IS_ERR(vreg->reg)) { + err = PTR_ERR(vreg->reg); + vreg->reg = NULL; + if (!optional) + dev_err(dev, "failed to get %s, %d\n", name, err); + goto out; + } + + if (dev->of_node) { + snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); + err = of_property_read_u32(dev->of_node, + prop_name, &vreg->max_uA); + if (err && err != -EINVAL) { + dev_err(dev, "%s: failed to read %s\n", + __func__, prop_name); + goto out; + } else if (err == -EINVAL || !vreg->max_uA) { + if (regulator_count_voltages(vreg->reg) > 0) { + dev_err(dev, "%s: %s is mandatory\n", + __func__, prop_name); + goto out; + } + err = 0; + } + snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name); + if (of_get_property(dev->of_node, prop_name, NULL)) + vreg->is_always_on = true; + else + vreg->is_always_on = false; + } + + if (!strcmp(name, "vdda-pll")) { + vreg->max_uV = VDDA_PLL_MAX_UV; + vreg->min_uV = VDDA_PLL_MIN_UV; + } else if (!strcmp(name, "vdda-phy")) { + vreg->max_uV = VDDA_PHY_MAX_UV; + vreg->min_uV = VDDA_PHY_MIN_UV; + } else if (!strcmp(name, "vddp-ref-clk")) { + vreg->max_uV = VDDP_REF_CLK_MAX_UV; + vreg->min_uV = VDDP_REF_CLK_MIN_UV; + } + +out: + if (err) + kfree(vreg->name); + return err; +} + +static int ufs_qcom_phy_init_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, const char *name) +{ + return __ufs_qcom_phy_init_vreg(phy, vreg, name, false); +} + +static +int ufs_qcom_phy_cfg_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, bool on) +{ + int ret = 0; + struct regulator *reg = vreg->reg; + const char *name = vreg->name; + int min_uV; + int uA_load; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + BUG_ON(!vreg); + + if (regulator_count_voltages(reg) > 0) { + min_uV = on ? vreg->min_uV : 0; + ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); + if (ret) { + dev_err(dev, "%s: %s set voltage failed, err=%d\n", + __func__, name, ret); + goto out; + } + uA_load = on ? vreg->max_uA : 0; + ret = regulator_set_optimum_mode(reg, uA_load); + if (ret >= 0) { + /* + * regulator_set_optimum_mode() returns new regulator + * mode upon success. + */ + ret = 0; + } else { + dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", + __func__, name, uA_load, ret); + goto out; + } + } +out: + return ret; +} + +static +int ufs_qcom_phy_enable_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + int ret = 0; + + if (!vreg || vreg->enabled) + goto out; + + ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true); + if (ret) { + dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", + __func__, ret); + goto out; + } + + ret = regulator_enable(vreg->reg); + if (ret) { + dev_err(dev, "%s: enable failed, err=%d\n", + __func__, ret); + goto out; + } + + vreg->enabled = true; +out: + return ret; +} + +int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy) +{ + int ret = 0; + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_ref_clk_enabled) + goto out; + + /* + * reference clock is propagated in a daisy-chained manner from + * source to phy, so ungate them at each stage. + */ + ret = clk_prepare_enable(phy->ref_clk_src); + if (ret) { + dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", + __func__, ret); + goto out; + } + + /* + * "ref_clk_parent" is optional clock hence make sure that clk reference + * is available before trying to enable the clock. + */ + if (phy->ref_clk_parent) { + ret = clk_prepare_enable(phy->ref_clk_parent); + if (ret) { + dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", + __func__, ret); + goto out_disable_src; + } + } + + ret = clk_prepare_enable(phy->ref_clk); + if (ret) { + dev_err(phy->dev, "%s: ref_clk enable failed %d\n", + __func__, ret); + goto out_disable_parent; + } + + phy->is_ref_clk_enabled = true; + goto out; + +out_disable_parent: + if (phy->ref_clk_parent) + clk_disable_unprepare(phy->ref_clk_parent); +out_disable_src: + clk_disable_unprepare(phy->ref_clk_src); +out: + return ret; +} + +static +int ufs_qcom_phy_disable_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + int ret = 0; + + if (!vreg || !vreg->enabled || vreg->is_always_on) + goto out; + + ret = regulator_disable(vreg->reg); + + if (!ret) { + /* ignore errors on applying disable config */ + ufs_qcom_phy_cfg_vreg(phy, vreg, false); + vreg->enabled = false; + } else { + dev_err(dev, "%s: %s disable failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_ref_clk_enabled) { + clk_disable_unprepare(phy->ref_clk); + /* + * "ref_clk_parent" is optional clock hence make sure that clk + * reference is available before trying to disable the clock. + */ + if (phy->ref_clk_parent) + clk_disable_unprepare(phy->ref_clk_parent); + clk_disable_unprepare(phy->ref_clk_src); + phy->is_ref_clk_enabled = false; + } +} + +#define UFS_REF_CLK_EN (1 << 5) + +static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->dev_ref_clk_ctrl_mmio && + (enable ^ phy->is_dev_ref_clk_enabled)) { + u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio); + + if (enable) + temp |= UFS_REF_CLK_EN; + else + temp &= ~UFS_REF_CLK_EN; + + /* + * If we are here to disable this clock immediately after + * entering into hibern8, we need to make sure that device + * ref_clk is active atleast 1us after the hibern8 enter. + */ + if (!enable) + udelay(1); + + writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio); + /* ensure that ref_clk is enabled/disabled before we return */ + wmb(); + /* + * If we call hibern8 exit after this, we need to make sure that + * device ref_clk is stable for atleast 1us before the hibern8 + * exit command. + */ + if (enable) + udelay(1); + + phy->is_dev_ref_clk_enabled = enable; + } +} + +void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy) +{ + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true); +} + +void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy) +{ + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false); +} + +/* Turn ON M-PHY RMMI interface clocks */ +int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (phy->is_iface_clk_enabled) + goto out; + + ret = clk_prepare_enable(phy->tx_iface_clk); + if (ret) { + dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", + __func__, ret); + goto out; + } + ret = clk_prepare_enable(phy->rx_iface_clk); + if (ret) { + clk_disable_unprepare(phy->tx_iface_clk); + dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", + __func__, ret); + goto out; + } + phy->is_iface_clk_enabled = true; + +out: + return ret; +} + +/* Turn OFF M-PHY RMMI interface clocks */ +void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_iface_clk_enabled) { + clk_disable_unprepare(phy->tx_iface_clk); + clk_disable_unprepare(phy->rx_iface_clk); + phy->is_iface_clk_enabled = false; + } +} + +int ufs_qcom_phy_start_serdes(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { + dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); + } + + return ret; +} + +int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) { + dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, + tx_lanes); + } + + return ret; +} + +void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, + u8 major, u16 minor, u16 step) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + ufs_qcom_phy->host_ctrl_rev_major = major; + ufs_qcom_phy->host_ctrl_rev_minor = minor; + ufs_qcom_phy->host_ctrl_rev_step = step; +} + +int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) { + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ret = ufs_qcom_phy->phy_spec_ops-> + calibrate_phy(ufs_qcom_phy, is_rate_B); + if (ret) + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n", + __func__, ret); + } + + return ret; +} + +int ufs_qcom_phy_remove(struct phy *generic_phy, + struct ufs_qcom_phy *ufs_qcom_phy) +{ + phy_power_off(generic_phy); + + kfree(ufs_qcom_phy->vdda_pll.name); + kfree(ufs_qcom_phy->vdda_phy.name); + + return 0; +} + +int ufs_qcom_phy_exit(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + if (ufs_qcom_phy->is_powered_on) + phy_power_off(generic_phy); + + return 0; +} + +int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { + dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", + __func__); + return -ENOTSUPP; + } + + return ufs_qcom_phy->phy_spec_ops-> + is_physical_coding_sublayer_ready(ufs_qcom_phy); +} + +int ufs_qcom_phy_power_on(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); + struct device *dev = phy_common->dev; + int err; + + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy); + if (err) { + dev_err(dev, "%s enable vdda_phy failed, err=%d\n", + __func__, err); + goto out; + } + + phy_common->phy_spec_ops->power_control(phy_common, true); + + /* vdda_pll also enables ref clock LDOs so enable it first */ + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll); + if (err) { + dev_err(dev, "%s enable vdda_pll failed, err=%d\n", + __func__, err); + goto out_disable_phy; + } + + err = ufs_qcom_phy_enable_ref_clk(generic_phy); + if (err) { + dev_err(dev, "%s enable phy ref clock failed, err=%d\n", + __func__, err); + goto out_disable_pll; + } + + /* enable device PHY ref_clk pad rail */ + if (phy_common->vddp_ref_clk.reg) { + err = ufs_qcom_phy_enable_vreg(generic_phy, + &phy_common->vddp_ref_clk); + if (err) { + dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", + __func__, err); + goto out_disable_ref_clk; + } + } + + phy_common->is_powered_on = true; + goto out; + +out_disable_ref_clk: + ufs_qcom_phy_disable_ref_clk(generic_phy); +out_disable_pll: + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); +out_disable_phy: + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); +out: + return err; +} + +int ufs_qcom_phy_power_off(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); + + phy_common->phy_spec_ops->power_control(phy_common, false); + + if (phy_common->vddp_ref_clk.reg) + ufs_qcom_phy_disable_vreg(generic_phy, + &phy_common->vddp_ref_clk); + ufs_qcom_phy_disable_ref_clk(generic_phy); + + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); + phy_common->is_powered_on = false; + + return 0; +} |