diff options
| -rw-r--r-- | drivers/net/wan/cycx_drv.c | 81 | ||||
| -rw-r--r-- | drivers/net/wan/cycx_main.c | 31 | ||||
| -rw-r--r-- | drivers/net/wan/cycx_x25.c | 177 |
3 files changed, 133 insertions, 156 deletions
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c index 164c3624ba89..2a3ecae67a90 100644 --- a/drivers/net/wan/cycx_drv.c +++ b/drivers/net/wan/cycx_drv.c @@ -48,6 +48,8 @@ * Aug 8, 1998 acme Initial version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> /* __init */ #include <linux/module.h> #include <linux/kernel.h> /* printk(), and other useful stuff */ @@ -81,10 +83,9 @@ static u16 checksum(u8 *buf, u32 len); /* Global Data */ /* private data */ -static const char modname[] = "cycx_drv"; static const char fullname[] = "Cyclom 2X Support Module"; -static const char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " - "<acme@conectiva.com.br>"; +static const char copyright[] = + "(c) 1998-2003 Arnaldo Carvalho de Melo <acme@conectiva.com.br>"; /* Hardware configuration options. * These are arrays of configuration options used by verification routines. @@ -110,8 +111,8 @@ static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; static int __init cycx_drv_init(void) { - printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE, - copyright); + pr_info("%s v%u.%u %s\n", + fullname, MOD_VERSION, MOD_RELEASE, copyright); return 0; } @@ -139,18 +140,16 @@ int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase) /* Verify IRQ configuration options */ if (!get_option_index(cycx_2x_irq_options, hw->irq)) { - printk(KERN_ERR "%s: IRQ %d is invalid!\n", modname, hw->irq); + pr_err("IRQ %d is invalid!\n", hw->irq); return -EINVAL; } /* Setup adapter dual-port memory window and test memory */ if (!dpmbase) { - printk(KERN_ERR "%s: you must specify the dpm address!\n", - modname); + pr_err("you must specify the dpm address!\n"); return -EINVAL; } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) { - printk(KERN_ERR "%s: memory address 0x%lX is invalid!\n", - modname, dpmbase); + pr_err("memory address 0x%lX is invalid!\n", dpmbase); return -EINVAL; } @@ -158,13 +157,12 @@ int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase) hw->dpmsize = CYCX_WINDOWSIZE; if (!detect_cyc2x(hw->dpmbase)) { - printk(KERN_ERR "%s: adapter Cyclom 2X not found at " - "address 0x%lX!\n", modname, dpmbase); + pr_err("adapter Cyclom 2X not found at address 0x%lX!\n", + dpmbase); return -EINVAL; } - printk(KERN_INFO "%s: found Cyclom 2X card at address 0x%lX.\n", - modname, dpmbase); + pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase); /* Load firmware. If loader fails then shut down adapter */ err = load_cyc2x(hw, cfm, len); @@ -339,7 +337,7 @@ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) if (buffer_load(addr, code + i, min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) { - printk(KERN_ERR "%s: Error !!\n", modname); + pr_err("Error !!\n"); return -1; } @@ -370,7 +368,7 @@ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) if (buffer_load(addr, code + i, min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) { - printk(KERN_ERR "%s: Error !!\n", modname); + pr_err("Error !!\n"); return -1; } @@ -391,23 +389,20 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) u16 cksum; /* Announce */ - printk(KERN_INFO "%s: firmware signature=\"%s\"\n", modname, - cfm->signature); + pr_info("firmware signature=\"%s\"\n", cfm->signature); /* Verify firmware signature */ if (strcmp(cfm->signature, CFM_SIGNATURE)) { - printk(KERN_ERR "%s:load_cyc2x: not Cyclom-2X firmware!\n", - modname); + pr_err("load_cyc2x: not Cyclom-2X firmware!\n"); return -EINVAL; } - printk(KERN_INFO "%s: firmware version=%u\n", modname, cfm->version); + pr_info("firmware version=%u\n", cfm->version); /* Verify firmware module format version */ if (cfm->version != CFM_VERSION) { - printk(KERN_ERR "%s:%s: firmware format %u rejected! " - "Expecting %u.\n", - modname, __func__, cfm->version, CFM_VERSION); + pr_err("%s: firmware format %u rejected! Expecting %u.\n", + __func__, cfm->version, CFM_VERSION); return -EINVAL; } @@ -419,23 +414,22 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) || */ if (cksum != cfm->checksum) { - printk(KERN_ERR "%s:%s: firmware corrupted!\n", - modname, __func__); - printk(KERN_ERR " cdsize = 0x%x (expected 0x%lx)\n", - len - (int)sizeof(struct cycx_firmware) - 1, - cfm->info.codesize); - printk(KERN_ERR " chksum = 0x%x (expected 0x%x)\n", - cksum, cfm->checksum); + pr_err("%s: firmware corrupted!\n", __func__); + pr_err(" cdsize = 0x%x (expected 0x%lx)\n", + len - (int)sizeof(struct cycx_firmware) - 1, + cfm->info.codesize); + pr_err(" chksum = 0x%x (expected 0x%x)\n", + cksum, cfm->checksum); return -EINVAL; } /* If everything is ok, set reset, data and code pointers */ img_hdr = (struct cycx_fw_header *)&cfm->image; #ifdef FIRMWARE_DEBUG - printk(KERN_INFO "%s:%s: image sizes\n", __func__, modname); - printk(KERN_INFO " reset=%lu\n", img_hdr->reset_size); - printk(KERN_INFO " data=%lu\n", img_hdr->data_size); - printk(KERN_INFO " code=%lu\n", img_hdr->code_size); + pr_info("%s: image sizes\n", __func__); + pr_info(" reset=%lu\n", img_hdr->reset_size); + pr_info(" data=%lu\n", img_hdr->data_size); + pr_info(" code=%lu\n", img_hdr->code_size); #endif reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header); data_image = reset_image + img_hdr->reset_size; @@ -443,15 +437,14 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) /*---- Start load ----*/ /* Announce */ - printk(KERN_INFO "%s: loading firmware %s (ID=%u)...\n", modname, - cfm->descr[0] ? cfm->descr : "unknown firmware", - cfm->info.codeid); + pr_info("loading firmware %s (ID=%u)...\n", + cfm->descr[0] ? cfm->descr : "unknown firmware", + cfm->info.codeid); for (i = 0 ; i < 5 ; i++) { /* Reset Cyclom hardware */ if (!reset_cyc2x(hw->dpmbase)) { - printk(KERN_ERR "%s: dpm problem or board not found\n", - modname); + pr_err("dpm problem or board not found\n"); return -EINVAL; } @@ -468,19 +461,19 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) msleep_interruptible(1 * 1000); } - printk(KERN_ERR "%s: reset not started.\n", modname); + pr_err("reset not started\n"); return -EINVAL; reset_loaded: /* Load data.bin */ if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) { - printk(KERN_ERR "%s: cannot load data file.\n", modname); + pr_err("cannot load data file\n"); return -EINVAL; } /* Load code.bin */ if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) { - printk(KERN_ERR "%s: cannot load code file.\n", modname); + pr_err("cannot load code file\n"); return -EINVAL; } @@ -493,7 +486,7 @@ reset_loaded: /* Arthur Ganzert's tip: wait a while after the firmware loading... seg abr 26 17:17:12 EST 1999 - acme */ msleep_interruptible(7 * 1000); - printk(KERN_INFO "%s: firmware loaded!\n", modname); + pr_info("firmware loaded!\n"); /* enable interrupts */ cycx_inten(hw); diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c index a0976d1f97c6..81fbbad406be 100644 --- a/drivers/net/wan/cycx_main.c +++ b/drivers/net/wan/cycx_main.c @@ -40,6 +40,8 @@ * 1998/08/08 acme Initial version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/stddef.h> /* offsetof(), etc. */ #include <linux/errno.h> /* return codes */ #include <linux/string.h> /* inline memset(), etc. */ @@ -107,7 +109,7 @@ static int __init cycx_init(void) { int cnt, err = -ENOMEM; - printk(KERN_INFO "%s v%u.%u %s\n", + pr_info("%s v%u.%u %s\n", cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE, cycx_copyright); @@ -133,9 +135,8 @@ static int __init cycx_init(void) err = register_wan_device(wandev); if (err) { - printk(KERN_ERR "%s: %s registration failed with " - "error %d!\n", - cycx_drvname, card->devname, err); + pr_err("%s registration failed with error %d!\n", + card->devname, err); break; } } @@ -198,14 +199,13 @@ static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf) rc = -EINVAL; if (!conf->data_size || !conf->data) { - printk(KERN_ERR "%s: firmware not found in configuration " - "data!\n", wandev->name); + pr_err("%s: firmware not found in configuration data!\n", + wandev->name); goto out; } if (conf->irq <= 0) { - printk(KERN_ERR "%s: can't configure without IRQ!\n", - wandev->name); + pr_err("%s: can't configure without IRQ!\n", wandev->name); goto out; } @@ -213,8 +213,7 @@ static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf) irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */ if (request_irq(irq, cycx_isr, 0, wandev->name, card)) { - printk(KERN_ERR "%s: can't reserve IRQ %d!\n", - wandev->name, irq); + pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq); goto out; } @@ -246,8 +245,7 @@ static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf) break; #endif default: - printk(KERN_ERR "%s: this firmware is not supported!\n", - wandev->name); + pr_err("%s: this firmware is not supported!\n", wandev->name); rc = -EINVAL; } @@ -288,8 +286,7 @@ static int cycx_wan_shutdown(struct wan_device *wandev) card = wandev->private; wandev->state = WAN_UNCONFIGURED; cycx_down(&card->hw); - printk(KERN_INFO "%s: irq %d being freed!\n", wandev->name, - wandev->irq); + pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq); free_irq(wandev->irq, card); out: return ret; } @@ -308,8 +305,8 @@ static irqreturn_t cycx_isr(int irq, void *dev_id) goto out; if (card->in_isr) { - printk(KERN_WARNING "%s: interrupt re-entrancy on IRQ %d!\n", - card->devname, card->wandev.irq); + pr_warn("%s: interrupt re-entrancy on IRQ %d!\n", + card->devname, card->wandev.irq); goto out; } @@ -337,7 +334,7 @@ void cycx_set_state(struct cycx_device *card, int state) string_state = "disconnected!"; break; } - printk(KERN_INFO "%s: link %s\n", card->devname, string_state); + pr_info("%s: link %s\n", card->devname, string_state); card->wandev.state = state; } diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c index cf9e15fd8d91..06f3f6309e4b 100644 --- a/drivers/net/wan/cycx_x25.c +++ b/drivers/net/wan/cycx_x25.c @@ -76,6 +76,8 @@ * 1998/08/08 acme Initial version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define CYCLOMX_X25_DEBUG 1 #include <linux/ctype.h> /* isdigit() */ @@ -230,8 +232,8 @@ int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf) /* Verify configuration ID */ if (conf->config_id != WANCONFIG_X25) { - printk(KERN_INFO "%s: invalid configuration ID %u!\n", - card->devname, conf->config_id); + pr_info("%s: invalid configuration ID %u!\n", + card->devname, conf->config_id); return -EINVAL; } @@ -374,8 +376,7 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, int err = 0; if (!conf->name[0] || strlen(conf->name) > WAN_IFNAME_SZ) { - printk(KERN_INFO "%s: invalid interface name!\n", - card->devname); + pr_info("%s: invalid interface name!\n", card->devname); return -EINVAL; } @@ -398,8 +399,8 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, if (len) { if (len > WAN_ADDRESS_SZ) { - printk(KERN_ERR "%s: %s local addr too long!\n", - wandev->name, chan->name); + pr_err("%s: %s local addr too long!\n", + wandev->name, chan->name); err = -EINVAL; goto error; } else { @@ -429,15 +430,14 @@ static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc) chan->lcn = lcn; else { - printk(KERN_ERR - "%s: PVC %u is out of range on interface %s!\n", - wandev->name, lcn, chan->name); + pr_err("%s: PVC %u is out of range on interface %s!\n", + wandev->name, lcn, chan->name); err = -EINVAL; goto error; } } else { - printk(KERN_ERR "%s: invalid media address on interface %s!\n", - wandev->name, chan->name); + pr_err("%s: invalid media address on interface %s!\n", + wandev->name, chan->name); err = -EINVAL; goto error; } @@ -607,9 +607,8 @@ static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, ++chan->ifstats.tx_dropped; else if (chan->svc && chan->protocol && chan->protocol != ntohs(skb->protocol)) { - printk(KERN_INFO - "%s: unsupported Ethertype 0x%04X on interface %s!\n", - card->devname, ntohs(skb->protocol), dev->name); + pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n", + card->devname, ntohs(skb->protocol), dev->name); ++chan->ifstats.tx_errors; } else if (chan->protocol == ETH_P_IP) { switch (chan->state) { @@ -643,9 +642,8 @@ static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, cycx_x25_chan_disconnect(dev); goto free_packet; default: - printk(KERN_INFO - "%s: unknown %d x25-iface request on %s!\n", - card->devname, skb->data[0], dev->name); + pr_info("%s: unknown %d x25-iface request on %s!\n", + card->devname, skb->data[0], dev->name); ++chan->ifstats.tx_errors; goto free_packet; } @@ -746,8 +744,7 @@ static void cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd) card->buff_int_mode_unbusy = 1; netif_wake_queue(dev); } else - printk(KERN_ERR "%s:ackvc for inexistent lcn %d\n", - card->devname, lcn); + pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn); } /* Receive interrupt handler. @@ -780,8 +777,8 @@ static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd) dev = cycx_x25_get_dev_by_lcn(wandev, lcn); if (!dev) { /* Invalid channel, discard packet */ - printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n", - card->devname, lcn); + pr_info("%s: receiving on orphaned LCN %d!\n", + card->devname, lcn); return; } @@ -802,8 +799,8 @@ static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd) if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) + bufsize + dev->hard_header_len)) == NULL) { - printk(KERN_INFO "%s: no socket buffers available!\n", - card->devname); + pr_info("%s: no socket buffers available!\n", + card->devname); chan->drop_sequence = 1; ++chan->ifstats.rx_dropped; return; @@ -826,8 +823,8 @@ static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd) if (bitm) chan->drop_sequence = 1; - printk(KERN_INFO "%s: unexpectedly long packet sequence " - "on interface %s!\n", card->devname, dev->name); + pr_info("%s: unexpectedly long packet sequence on interface %s!\n", + card->devname, dev->name); ++chan->ifstats.rx_length_errors; return; } @@ -880,8 +877,8 @@ static void cycx_x25_irq_connect(struct cycx_device *card, dev = cycx_x25_get_dev_by_dte_addr(wandev, rem); if (!dev) { /* Invalid channel, discard packet */ - printk(KERN_INFO "%s: connect not expected: remote %s!\n", - card->devname, rem); + pr_info("%s: connect not expected: remote %s!\n", + card->devname, rem); return; } @@ -909,8 +906,8 @@ static void cycx_x25_irq_connect_confirm(struct cycx_device *card, if (!dev) { /* Invalid channel, discard packet */ clear_bit(--key, (void*)&card->u.x.connection_keys); - printk(KERN_INFO "%s: connect confirm not expected: lcn %d, " - "key=%d!\n", card->devname, lcn, key); + pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n", + card->devname, lcn, key); return; } @@ -934,8 +931,8 @@ static void cycx_x25_irq_disconnect_confirm(struct cycx_device *card, dev = cycx_x25_get_dev_by_lcn(wandev, lcn); if (!dev) { /* Invalid channel, discard packet */ - printk(KERN_INFO "%s:disconnect confirm not expected!:lcn %d\n", - card->devname, lcn); + pr_info("%s:disconnect confirm not expected!:lcn %d\n", + card->devname, lcn); return; } @@ -980,13 +977,13 @@ static void cycx_x25_irq_log(struct cycx_device *card, struct cycx_x25_cmd *cmd) cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1); cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1); - printk(KERN_INFO "cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n"); - printk(KERN_INFO "cmd->buf=0x%X\n", cmd->buf); - printk(KERN_INFO "Log message code=0x%X\n", msg_code); - printk(KERN_INFO "Link=%d\n", link); - printk(KERN_INFO "log code=0x%X\n", code); - printk(KERN_INFO "log routine=0x%X\n", routine); - printk(KERN_INFO "Message size=%d\n", size); + pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n"); + pr_info("cmd->buf=0x%X\n", cmd->buf); + pr_info("Log message code=0x%X\n", msg_code); + pr_info("Link=%d\n", link); + pr_info("log code=0x%X\n", code); + pr_info("log routine=0x%X\n", routine); + pr_info("Message size=%d\n", size); hex_dump("Message", bf, toread); #endif } @@ -1009,24 +1006,14 @@ static void cycx_x25_irq_stat(struct cycx_device *card, static void cycx_x25_irq_spurious(struct cycx_device *card, struct cycx_x25_cmd *cmd) { - printk(KERN_INFO "%s: spurious interrupt (0x%X)!\n", - card->devname, cmd->command); + pr_info("%s: spurious interrupt (0x%X)!\n", + card->devname, cmd->command); } #ifdef CYCLOMX_X25_DEBUG static void hex_dump(char *msg, unsigned char *p, int len) { - unsigned char hex[1024], - * phex = hex; - - if (len >= (sizeof(hex) / 2)) - len = (sizeof(hex) / 2) - 1; - - while (len--) { - sprintf(phex, "%02x", *p++); - phex += 2; - } - - printk(KERN_INFO "%s: %s\n", msg, hex); + print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1, + p, len, true); } #endif @@ -1203,8 +1190,8 @@ static int x25_place_call(struct cycx_device *card, u8 key; if (card->u.x.connection_keys == ~0U) { - printk(KERN_INFO "%s: too many simultaneous connection " - "requests!\n", card->devname); + pr_info("%s: too many simultaneous connection requests!\n", + card->devname); return -EAGAIN; } @@ -1381,8 +1368,8 @@ static void cycx_x25_chan_timer(unsigned long d) if (chan->state == WAN_CONNECTED) cycx_x25_chan_disconnect(dev); else - printk(KERN_ERR "%s: %s for svc (%s) not connected!\n", - chan->card->devname, __func__, dev->name); + pr_err("%s: %s for svc (%s) not connected!\n", + chan->card->devname, __func__, dev->name); } /* Set logical channel state. */ @@ -1433,8 +1420,8 @@ static void cycx_x25_set_chan_state(struct net_device *dev, u8 state) break; } - printk(KERN_INFO "%s: interface %s %s\n", card->devname, - dev->name, string_state); + pr_info("%s: interface %s %s\n", + card->devname, dev->name, string_state); chan->state = state; } @@ -1488,7 +1475,7 @@ static void cycx_x25_chan_send_event(struct net_device *dev, u8 event) unsigned char *ptr; if ((skb = dev_alloc_skb(1)) == NULL) { - printk(KERN_ERR "%s: out of memory\n", __func__); + pr_err("%s: out of memory\n", __func__); return; } @@ -1557,56 +1544,56 @@ static void reset_timer(struct net_device *dev) #ifdef CYCLOMX_X25_DEBUG static void cycx_x25_dump_config(struct cycx_x25_config *conf) { - printk(KERN_INFO "X.25 configuration\n"); - printk(KERN_INFO "-----------------\n"); - printk(KERN_INFO "link number=%d\n", conf->link); - printk(KERN_INFO "line speed=%d\n", conf->speed); - printk(KERN_INFO "clock=%sternal\n", conf->clock == 8 ? "Ex" : "In"); - printk(KERN_INFO "# level 2 retransm.=%d\n", conf->n2); - printk(KERN_INFO "level 2 window=%d\n", conf->n2win); - printk(KERN_INFO "level 3 window=%d\n", conf->n3win); - printk(KERN_INFO "# logical channels=%d\n", conf->nvc); - printk(KERN_INFO "level 3 pkt len=%d\n", conf->pktlen); - printk(KERN_INFO "my address=%d\n", conf->locaddr); - printk(KERN_INFO "remote address=%d\n", conf->remaddr); - printk(KERN_INFO "t1=%d seconds\n", conf->t1); - printk(KERN_INFO "t2=%d seconds\n", conf->t2); - printk(KERN_INFO "t21=%d seconds\n", conf->t21); - printk(KERN_INFO "# PVCs=%d\n", conf->npvc); - printk(KERN_INFO "t23=%d seconds\n", conf->t23); - printk(KERN_INFO "flags=0x%x\n", conf->flags); + pr_info("X.25 configuration\n"); + pr_info("-----------------\n"); + pr_info("link number=%d\n", conf->link); + pr_info("line speed=%d\n", conf->speed); + pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In"); + pr_info("# level 2 retransm.=%d\n", conf->n2); + pr_info("level 2 window=%d\n", conf->n2win); + pr_info("level 3 window=%d\n", conf->n3win); + pr_info("# logical channels=%d\n", conf->nvc); + pr_info("level 3 pkt len=%d\n", conf->pktlen); + pr_info("my address=%d\n", conf->locaddr); + pr_info("remote address=%d\n", conf->remaddr); + pr_info("t1=%d seconds\n", conf->t1); + pr_info("t2=%d seconds\n", conf->t2); + pr_info("t21=%d seconds\n", conf->t21); + pr_info("# PVCs=%d\n", conf->npvc); + pr_info("t23=%d seconds\n", conf->t23); + pr_info("flags=0x%x\n", conf->flags); } static void cycx_x25_dump_stats(struct cycx_x25_stats *stats) { - printk(KERN_INFO "X.25 statistics\n"); - printk(KERN_INFO "--------------\n"); - printk(KERN_INFO "rx_crc_errors=%d\n", stats->rx_crc_errors); - printk(KERN_INFO "rx_over_errors=%d\n", stats->rx_over_errors); - printk(KERN_INFO "n2_tx_frames=%d\n", stats->n2_tx_frames); - printk(KERN_INFO "n2_rx_frames=%d\n", stats->n2_rx_frames); - printk(KERN_INFO "tx_timeouts=%d\n", stats->tx_timeouts); - printk(KERN_INFO "rx_timeouts=%d\n", stats->rx_timeouts); - printk(KERN_INFO "n3_tx_packets=%d\n", stats->n3_tx_packets); - printk(KERN_INFO "n3_rx_packets=%d\n", stats->n3_rx_packets); - printk(KERN_INFO "tx_aborts=%d\n", stats->tx_aborts); - printk(KERN_INFO "rx_aborts=%d\n", stats->rx_aborts); + pr_info("X.25 statistics\n"); + pr_info("--------------\n"); + pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors); + pr_info("rx_over_errors=%d\n", stats->rx_over_errors); + pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames); + pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames); + pr_info("tx_timeouts=%d\n", stats->tx_timeouts); + pr_info("rx_timeouts=%d\n", stats->rx_timeouts); + pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets); + pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets); + pr_info("tx_aborts=%d\n", stats->tx_aborts); + pr_info("rx_aborts=%d\n", stats->rx_aborts); } static void cycx_x25_dump_devs(struct wan_device *wandev) { struct net_device *dev = wandev->dev; - printk(KERN_INFO "X.25 dev states\n"); - printk(KERN_INFO "name: addr: txoff: protocol:\n"); - printk(KERN_INFO "---------------------------------------\n"); + pr_info("X.25 dev states\n"); + pr_info("name: addr: txoff: protocol:\n"); + pr_info("---------------------------------------\n"); while(dev) { struct cycx_x25_channel *chan = netdev_priv(dev); - printk(KERN_INFO "%-5.5s %-15.15s %d ETH_P_%s\n", - chan->name, chan->addr, netif_queue_stopped(dev), - chan->protocol == ETH_P_IP ? "IP" : "X25"); + pr_info("%-5.5s %-15.15s %d ETH_P_%s\n", + chan->name, chan->addr, netif_queue_stopped(dev), + chan->protocol == ETH_P_IP ? "IP" : "X25"); dev = chan->slave; } } |