diff options
| -rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 31 |
1 files changed, 17 insertions, 14 deletions
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index a566231a9c79..5b7a8c36e4f7 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -82,6 +82,7 @@ #define OP_WRITE_SECURITY_REVC 0x9A #define OP_WRITE_SECURITY 0x9B /* revision D */ +#define CFI_MFR_ATMEL 0x1F struct dataflash { u8 command[4]; @@ -738,14 +739,15 @@ static struct flash_info dataflash_data[] = { static struct flash_info *jedec_probe(struct spi_device *spi) { - int tmp; - u8 code = OP_READ_ID; - u8 id[3]; - u32 jedec; - struct flash_info *info; + int ret, i; + u8 code = OP_READ_ID; + u8 id[3]; + u32 jedec; + struct flash_info *info; int status; - /* JEDEC also defines an optional "extended device information" + /* + * JEDEC also defines an optional "extended device information" * string for after vendor-specific data, after the three bytes * we use here. Supporting some chips might require using it. * @@ -753,13 +755,14 @@ static struct flash_info *jedec_probe(struct spi_device *spi) * That's not an error; only rev C and newer chips handle it, and * only Atmel sells these chips. */ - tmp = spi_write_then_read(spi, &code, 1, id, 3); - if (tmp < 0) { + ret = spi_write_then_read(spi, &code, 1, id, 3); + if (ret < 0) { pr_debug("%s: error %d reading JEDEC ID\n", - dev_name(&spi->dev), tmp); - return ERR_PTR(tmp); + dev_name(&spi->dev), ret); + return ERR_PTR(ret); } - if (id[0] != 0x1f) + + if (id[0] != CFI_MFR_ATMEL) return NULL; jedec = id[0]; @@ -768,9 +771,9 @@ static struct flash_info *jedec_probe(struct spi_device *spi) jedec = jedec << 8; jedec |= id[2]; - for (tmp = 0, info = dataflash_data; - tmp < ARRAY_SIZE(dataflash_data); - tmp++, info++) { + for (i = 0, info = dataflash_data; + i < ARRAY_SIZE(dataflash_data); + i++, info++) { if (info->jedec_id == jedec) { pr_debug("%s: OTP, sector protect%s\n", dev_name(&spi->dev), |