diff options
5 files changed, 173 insertions, 0 deletions
diff --git a/drivers/platform/x86/intel_speed_select_if/Makefile b/drivers/platform/x86/intel_speed_select_if/Makefile index c12687672fc9..7e94919208d3 100644 --- a/drivers/platform/x86/intel_speed_select_if/Makefile +++ b/drivers/platform/x86/intel_speed_select_if/Makefile @@ -5,3 +5,4 @@ # obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_common.o +obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mmio.o diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c b/drivers/platform/x86/intel_speed_select_if/isst_if_common.c index 72e74d72724b..3f96a3925bc6 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.c @@ -206,6 +206,7 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd, { void __user *argp = (void __user *)arg; struct isst_if_cmd_cb cmd_cb; + struct isst_if_cmd_cb *cb; long ret = -ENOTTY; switch (cmd) { @@ -218,6 +219,11 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd, cmd_cb.cmd_callback = isst_if_proc_phyid_req; ret = isst_if_exec_multi_cmd(argp, &cmd_cb); break; + case ISST_IF_IO_CMD: + cb = &punit_callbacks[ISST_IF_DEV_MMIO]; + if (cb->registered) + ret = isst_if_exec_multi_cmd(argp, cb); + break; default: break; } diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h index dade77c58b22..cdc7d019748a 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h @@ -10,6 +10,8 @@ #ifndef __ISST_IF_COMMON_H #define __ISST_IF_COMMON_H +#define INTEL_RAPL_PRIO_DEVID_0 0x3451 + /* * Validate maximum commands in a single request. * This is enough to handle command to every core in one ioctl, or all diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c new file mode 100644 index 000000000000..1c25a1235b9e --- /dev/null +++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select Interface: MMIO Interface + * Copyright (c) 2019, Intel Corporation. + * All rights reserved. + * + * Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/sched/signal.h> +#include <linux/uaccess.h> +#include <uapi/linux/isst_if.h> + +#include "isst_if_common.h" + +struct isst_if_device { + void __iomem *punit_mmio; + struct mutex mutex; +}; + +static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume) +{ + struct isst_if_device *punit_dev; + struct isst_if_io_reg *io_reg; + struct pci_dev *pdev; + + io_reg = (struct isst_if_io_reg *)cmd_ptr; + if (io_reg->reg < 0x04 || io_reg->reg > 0xD0) + return -EINVAL; + + if (io_reg->read_write && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + pdev = isst_if_get_pci_dev(io_reg->logical_cpu, 0, 0, 1); + if (!pdev) + return -EINVAL; + + punit_dev = pci_get_drvdata(pdev); + if (!punit_dev) + return -EINVAL; + + /* + * Ensure that operation is complete on a PCI device to avoid read + * write race by using per PCI device mutex. + */ + mutex_lock(&punit_dev->mutex); + if (io_reg->read_write) { + writel(io_reg->value, punit_dev->punit_mmio+io_reg->reg); + *write_only = 1; + } else { + io_reg->value = readl(punit_dev->punit_mmio+io_reg->reg); + *write_only = 0; + } + mutex_unlock(&punit_dev->mutex); + + return 0; +} + +static const struct pci_device_id isst_if_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0)}, + { 0 }, +}; +MODULE_DEVICE_TABLE(pci, isst_if_ids); + +static int isst_if_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct isst_if_device *punit_dev; + struct isst_if_cmd_cb cb; + u32 mmio_base, pcu_base; + u64 base_addr; + int ret; + + punit_dev = devm_kzalloc(&pdev->dev, sizeof(*punit_dev), GFP_KERNEL); + if (!punit_dev) + return -ENOMEM; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + ret = pci_read_config_dword(pdev, 0xD0, &mmio_base); + if (ret) + return ret; + + ret = pci_read_config_dword(pdev, 0xFC, &pcu_base); + if (ret) + return ret; + + pcu_base &= GENMASK(10, 0); + base_addr = (u64)mmio_base << 23 | (u64) pcu_base << 12; + punit_dev->punit_mmio = devm_ioremap(&pdev->dev, base_addr, 256); + if (!punit_dev->punit_mmio) + return -ENOMEM; + + mutex_init(&punit_dev->mutex); + pci_set_drvdata(pdev, punit_dev); + + memset(&cb, 0, sizeof(cb)); + cb.cmd_size = sizeof(struct isst_if_io_reg); + cb.offset = offsetof(struct isst_if_io_regs, io_reg); + cb.cmd_callback = isst_if_mmio_rd_wr; + cb.owner = THIS_MODULE; + ret = isst_if_cdev_register(ISST_IF_DEV_MMIO, &cb); + if (ret) + mutex_destroy(&punit_dev->mutex); + + return ret; +} + +static void isst_if_remove(struct pci_dev *pdev) +{ + struct isst_if_device *punit_dev; + + punit_dev = pci_get_drvdata(pdev); + isst_if_cdev_unregister(ISST_IF_DEV_MBOX); + mutex_destroy(&punit_dev->mutex); +} + +static struct pci_driver isst_if_pci_driver = { + .name = "isst_if_pci", + .id_table = isst_if_ids, + .probe = isst_if_probe, + .remove = isst_if_remove, +}; + +module_pci_driver(isst_if_pci_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel speed select interface mmio driver"); diff --git a/include/uapi/linux/isst_if.h b/include/uapi/linux/isst_if.h index 15d1f286a830..fe2492ade078 100644 --- a/include/uapi/linux/isst_if.h +++ b/include/uapi/linux/isst_if.h @@ -63,7 +63,40 @@ struct isst_if_cpu_maps { struct isst_if_cpu_map cpu_map[1]; }; +/** + * struct isst_if_io_reg - Read write PUNIT IO register + * @read_write: Value 0: Read, 1: Write + * @logical_cpu: Logical CPU number to get target PCI device. + * @reg: PUNIT register offset + * @value: For write operation value to write and for + * for read placeholder read value + * + * Structure to specify read/write data to PUNIT registers. + */ +struct isst_if_io_reg { + __u32 read_write; /* Read:0, Write:1 */ + __u32 logical_cpu; + __u32 reg; + __u32 value; +}; + +/** + * struct isst_if_io_regs - structure for IO register commands + * @cmd_count: Number of io reg commands in io_reg[] + * @io_reg[]: Holds one or more io_reg command structure + * + * This structure used with ioctl ISST_IF_IO_CMD to send + * one or more read/write commands to PUNIT. Here IOCTL return value + * indicates number of requests sent or error number if no requests have + * been sent. + */ +struct isst_if_io_regs { + __u32 req_count; + struct isst_if_io_reg io_reg[1]; +}; + #define ISST_IF_MAGIC 0xFE #define ISST_IF_GET_PLATFORM_INFO _IOR(ISST_IF_MAGIC, 0, struct isst_if_platform_info *) #define ISST_IF_GET_PHY_ID _IOWR(ISST_IF_MAGIC, 1, struct isst_if_cpu_map *) +#define ISST_IF_IO_CMD _IOW(ISST_IF_MAGIC, 2, struct isst_if_io_regs *) #endif |