diff options
| -rw-r--r-- | arch/x86/kernel/early_printk.c | 715 | ||||
| -rw-r--r-- | drivers/usb/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/early/Makefile | 5 | ||||
| -rw-r--r-- | drivers/usb/early/ehci-dbgp.c | 723 | ||||
| -rw-r--r-- | include/linux/usb/ehci_def.h | 6 |
5 files changed, 735 insertions, 715 deletions
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index b11cab3c323a..519a5e10be53 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -160,721 +160,6 @@ static struct console early_serial_console = { .index = -1, }; -#ifdef CONFIG_EARLY_PRINTK_DBGP - -static struct ehci_caps __iomem *ehci_caps; -static struct ehci_regs __iomem *ehci_regs; -static struct ehci_dbg_port __iomem *ehci_debug; -static unsigned int dbgp_endpoint_out; - -struct ehci_dev { - u32 bus; - u32 slot; - u32 func; -}; - -static struct ehci_dev ehci_dev; - -#define USB_DEBUG_DEVNUM 127 - -#define DBGP_DATA_TOGGLE 0x8800 - -static inline u32 dbgp_pid_update(u32 x, u32 tok) -{ - return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); -} - -static inline u32 dbgp_len_update(u32 x, u32 len) -{ - return (x & ~0x0f) | (len & 0x0f); -} - -/* - * USB Packet IDs (PIDs) - */ - -/* token */ -#define USB_PID_OUT 0xe1 -#define USB_PID_IN 0x69 -#define USB_PID_SOF 0xa5 -#define USB_PID_SETUP 0x2d -/* handshake */ -#define USB_PID_ACK 0xd2 -#define USB_PID_NAK 0x5a -#define USB_PID_STALL 0x1e -#define USB_PID_NYET 0x96 -/* data */ -#define USB_PID_DATA0 0xc3 -#define USB_PID_DATA1 0x4b -#define USB_PID_DATA2 0x87 -#define USB_PID_MDATA 0x0f -/* Special */ -#define USB_PID_PREAMBLE 0x3c -#define USB_PID_ERR 0x3c -#define USB_PID_SPLIT 0x78 -#define USB_PID_PING 0xb4 -#define USB_PID_UNDEF_0 0xf0 - -#define USB_PID_DATA_TOGGLE 0x88 -#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) - -#define PCI_CAP_ID_EHCI_DEBUG 0xa - -#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ -#define HUB_SHORT_RESET_TIME 10 -#define HUB_LONG_RESET_TIME 200 -#define HUB_RESET_TIMEOUT 500 - -#define DBGP_MAX_PACKET 8 - -static int dbgp_wait_until_complete(void) -{ - u32 ctrl; - int loop = 0x100000; - - do { - ctrl = readl(&ehci_debug->control); - /* Stop when the transaction is finished */ - if (ctrl & DBGP_DONE) - break; - } while (--loop > 0); - - if (!loop) - return -1; - - /* - * Now that we have observed the completed transaction, - * clear the done bit. - */ - writel(ctrl | DBGP_DONE, &ehci_debug->control); - return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); -} - -static void __init dbgp_mdelay(int ms) -{ - int i; - - while (ms--) { - for (i = 0; i < 1000; i++) - outb(0x1, 0x80); - } -} - -static void dbgp_breath(void) -{ - /* Sleep to give the debug port a chance to breathe */ -} - -static int dbgp_wait_until_done(unsigned ctrl) -{ - u32 pids, lpid; - int ret; - int loop = 3; - -retry: - writel(ctrl | DBGP_GO, &ehci_debug->control); - ret = dbgp_wait_until_complete(); - pids = readl(&ehci_debug->pids); - lpid = DBGP_PID_GET(pids); - - if (ret < 0) - return ret; - - /* - * If the port is getting full or it has dropped data - * start pacing ourselves, not necessary but it's friendly. - */ - if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) - dbgp_breath(); - - /* If I get a NACK reissue the transmission */ - if (lpid == USB_PID_NAK) { - if (--loop > 0) - goto retry; - } - - return ret; -} - -static void dbgp_set_data(const void *buf, int size) -{ - const unsigned char *bytes = buf; - u32 lo, hi; - int i; - - lo = hi = 0; - for (i = 0; i < 4 && i < size; i++) - lo |= bytes[i] << (8*i); - for (; i < 8 && i < size; i++) - hi |= bytes[i] << (8*(i - 4)); - writel(lo, &ehci_debug->data03); - writel(hi, &ehci_debug->data47); -} - -static void __init dbgp_get_data(void *buf, int size) -{ - unsigned char *bytes = buf; - u32 lo, hi; - int i; - - lo = readl(&ehci_debug->data03); - hi = readl(&ehci_debug->data47); - for (i = 0; i < 4 && i < size; i++) - bytes[i] = (lo >> (8*i)) & 0xff; - for (; i < 8 && i < size; i++) - bytes[i] = (hi >> (8*(i - 4))) & 0xff; -} - -static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, - const char *bytes, int size) -{ - u32 pids, addr, ctrl; - int ret; - - if (size > DBGP_MAX_PACKET) - return -1; - - addr = DBGP_EPADDR(devnum, endpoint); - - pids = readl(&ehci_debug->pids); - pids = dbgp_pid_update(pids, USB_PID_OUT); - - ctrl = readl(&ehci_debug->control); - ctrl = dbgp_len_update(ctrl, size); - ctrl |= DBGP_OUT; - ctrl |= DBGP_GO; - - dbgp_set_data(bytes, size); - writel(addr, &ehci_debug->address); - writel(pids, &ehci_debug->pids); - - ret = dbgp_wait_until_done(ctrl); - if (ret < 0) - return ret; - - return ret; -} - -static int __init dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, - int size) -{ - u32 pids, addr, ctrl; - int ret; - - if (size > DBGP_MAX_PACKET) - return -1; - - addr = DBGP_EPADDR(devnum, endpoint); - - pids = readl(&ehci_debug->pids); - pids = dbgp_pid_update(pids, USB_PID_IN); - - ctrl = readl(&ehci_debug->control); - ctrl = dbgp_len_update(ctrl, size); - ctrl &= ~DBGP_OUT; - ctrl |= DBGP_GO; - - writel(addr, &ehci_debug->address); - writel(pids, &ehci_debug->pids); - ret = dbgp_wait_until_done(ctrl); - if (ret < 0) - return ret; - - if (size > ret) - size = ret; - dbgp_get_data(data, size); - return ret; -} - -static int __init dbgp_control_msg(unsigned devnum, int requesttype, - int request, int value, int index, void *data, int size) -{ - u32 pids, addr, ctrl; - struct usb_ctrlrequest req; - int read; - int ret; - - read = (requesttype & USB_DIR_IN) != 0; - if (size > (read ? DBGP_MAX_PACKET:0)) - return -1; - - /* Compute the control message */ - req.bRequestType = requesttype; - req.bRequest = request; - req.wValue = cpu_to_le16(value); - req.wIndex = cpu_to_le16(index); - req.wLength = cpu_to_le16(size); - - pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); - addr = DBGP_EPADDR(devnum, 0); - - ctrl = readl(&ehci_debug->control); - ctrl = dbgp_len_update(ctrl, sizeof(req)); - ctrl |= DBGP_OUT; - ctrl |= DBGP_GO; - - /* Send the setup message */ - dbgp_set_data(&req, sizeof(req)); - writel(addr, &ehci_debug->address); - writel(pids, &ehci_debug->pids); - ret = dbgp_wait_until_done(ctrl); - if (ret < 0) - return ret; - - /* Read the result */ - return dbgp_bulk_read(devnum, 0, data, size); -} - - -/* Find a PCI capability */ -static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) -{ - u8 pos; - int bytes; - - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & - PCI_STATUS_CAP_LIST)) - return 0; - - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); - for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { - u8 id; - - pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); - if (id == 0xff) - break; - if (id == cap) - return pos; - - pos = read_pci_config_byte(num, slot, func, - pos+PCI_CAP_LIST_NEXT); - } - return 0; -} - -static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) -{ - u32 class; - - class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); - if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) - return 0; - - return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); -} - -static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) -{ - u32 bus, slot, func; - - for (bus = 0; bus < 256; bus++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { - unsigned cap; - - cap = __find_dbgp(bus, slot, func); - - if (!cap) - continue; - if (ehci_num-- != 0) - continue; - *rbus = bus; - *rslot = slot; - *rfunc = func; - return cap; - } - } - } - return 0; -} - -static int __init ehci_reset_port(int port) -{ - u32 portsc; - u32 delay_time, delay; - int loop; - - /* Reset the usb debug port */ - portsc = readl(&ehci_regs->port_status[port - 1]); - portsc &= ~PORT_PE; - portsc |= PORT_RESET; - writel(portsc, &ehci_regs->port_status[port - 1]); - - delay = HUB_ROOT_RESET_TIME; - for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; - delay_time += delay) { - dbgp_mdelay(delay); - - portsc = readl(&ehci_regs->port_status[port - 1]); - if (portsc & PORT_RESET) { - /* force reset to complete */ - loop = 2; - writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), - &ehci_regs->port_status[port - 1]); - do { - portsc = readl(&ehci_regs->port_status[port-1]); - } while ((portsc & PORT_RESET) && (--loop > 0)); - } - - /* Device went away? */ - if (!(portsc & PORT_CONNECT)) - return -ENOTCONN; - - /* bomb out completely if something weird happend */ - if ((portsc & PORT_CSC)) - return -EINVAL; - - /* If we've finished resetting, then break out of the loop */ - if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) - return 0; - } - return -EBUSY; -} - -static int __init ehci_wait_for_port(int port) -{ - u32 status; - int ret, reps; - - for (reps = 0; reps < 3; reps++) { - dbgp_mdelay(100); - status = readl(&ehci_regs->status); - if (status & STS_PCD) { - ret = ehci_reset_port(port); - if (ret == 0) - return 0; - } - } - return -ENOTCONN; -} - -#ifdef DBGP_DEBUG -# define dbgp_printk early_printk -#else -static inline void dbgp_printk(const char *fmt, ...) { } -#endif - -typedef void (*set_debug_port_t)(int port); - -static void __init default_set_debug_port(int port) -{ -} - -static set_debug_port_t __initdata set_debug_port = default_set_debug_port; - -static void __init nvidia_set_debug_port(int port) -{ - u32 dword; - dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, - 0x74); - dword &= ~(0x0f<<12); - dword |= ((port & 0x0f)<<12); - write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, - dword); - dbgp_printk("set debug port to %d\n", port); -} - -static void __init detect_set_debug_port(void) -{ - u32 vendorid; - - vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, - 0x00); - - if ((vendorid & 0xffff) == 0x10de) { - dbgp_printk("using nvidia set_debug_port\n"); - set_debug_port = nvidia_set_debug_port; - } -} - -static int __init ehci_setup(void) -{ - struct usb_debug_descriptor dbgp_desc; - u32 cmd, ctrl, status, portsc, hcs_params; - u32 debug_port, new_debug_port = 0, n_ports; - u32 devnum; - int ret, i; - int loop; - int port_map_tried; - int playtimes = 3; - -try_next_time: - port_map_tried = 0; - -try_next_port: - - hcs_params = readl(&ehci_caps->hcs_params); - debug_port = HCS_DEBUG_PORT(hcs_params); - n_ports = HCS_N_PORTS(hcs_params); - - dbgp_printk("debug_port: %d\n", debug_port); - dbgp_printk("n_ports: %d\n", n_ports); - - for (i = 1; i <= n_ports; i++) { - portsc = readl(&ehci_regs->port_status[i-1]); - dbgp_printk("portstatus%d: %08x\n", i, portsc); - } - - if (port_map_tried && (new_debug_port != debug_port)) { - if (--playtimes) { - set_debug_port(new_debug_port); - goto try_next_time; - } - return -1; - } - - loop = 100000; - /* Reset the EHCI controller */ - cmd = readl(&ehci_regs->command); - cmd |= CMD_RESET; - writel(cmd, &ehci_regs->command); - do { - cmd = readl(&ehci_regs->command); - } while ((cmd & CMD_RESET) && (--loop > 0)); - - if (!loop) { - dbgp_printk("can not reset ehci\n"); - return -1; - } - dbgp_printk("ehci reset done\n"); - - /* Claim ownership, but do not enable yet */ - ctrl = readl(&ehci_debug->control); - ctrl |= DBGP_OWNER; - ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); - writel(ctrl, &ehci_debug->control); - - /* Start the ehci running */ - cmd = readl(&ehci_regs->command); - cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); - cmd |= CMD_RUN; - writel(cmd, &ehci_regs->command); - - /* Ensure everything is routed to the EHCI */ - writel(FLAG_CF, &ehci_regs->configured_flag); - - /* Wait until the controller is no longer halted */ - loop = 10; - do { - status = readl(&ehci_regs->status); - } while ((status & STS_HALT) && (--loop > 0)); - - if (!loop) { - dbgp_printk("ehci can be started\n"); - return -1; - } - dbgp_printk("ehci started\n"); - - /* Wait for a device to show up in the debug port */ - ret = ehci_wait_for_port(debug_port); - if (ret < 0) { - dbgp_printk("No device found in debug port\n"); - goto next_debug_port; - } - dbgp_printk("ehci wait for port done\n"); - - /* Enable the debug port */ - ctrl = readl(&ehci_debug->control); - ctrl |= DBGP_CLAIM; - writel(ctrl, &ehci_debug->control); - ctrl = readl(&ehci_debug->control); - if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { - dbgp_printk("No device in debug port\n"); - writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); - goto err; - } - dbgp_printk("debug ported enabled\n"); - - /* Completely transfer the debug device to the debug controller */ - portsc = readl(&ehci_regs->port_status[debug_port - 1]); - portsc &= ~PORT_PE; - writel(portsc, &ehci_regs->port_status[debug_port - 1]); - - dbgp_mdelay(100); - - /* Find the debug device and make it device number 127 */ - for (devnum = 0; devnum <= 127; devnum++) { - ret = dbgp_control_msg(devnum, - USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, - &dbgp_desc, sizeof(dbgp_desc)); - if (ret > 0) - break; - } - if (devnum > 127) { - dbgp_printk("Could not find attached debug device\n"); - goto err; - } - if (ret < 0) { - dbgp_printk("Attached device is not a debug device\n"); - goto err; - } - dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; - - /* Move the device to 127 if it isn't already there */ - if (devnum != USB_DEBUG_DEVNUM) { - ret = dbgp_control_msg(devnum, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); - if (ret < 0) { - dbgp_printk("Could not move attached device to %d\n", - USB_DEBUG_DEVNUM); - goto err; - } - devnum = USB_DEBUG_DEVNUM; - dbgp_printk("debug device renamed to 127\n"); - } - - /* Enable the debug interface */ - ret = dbgp_control_msg(USB_DEBUG_DEVNUM, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); - if (ret < 0) { - dbgp_printk(" Could not enable the debug device\n"); - goto err; - } - dbgp_printk("debug interface enabled\n"); - - /* Perform a small write to get the even/odd data state in sync - */ - ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); - if (ret < 0) { - dbgp_printk("dbgp_bulk_write failed: %d\n", ret); - goto err; - } - dbgp_printk("small write doned\n"); - - return 0; -err: - /* Things didn't work so remove my claim */ - ctrl = readl(&ehci_debug->control); - ctrl &= ~(DBGP_CLAIM | DBGP_OUT); - writel(ctrl, &ehci_debug->control); - return -1; - -next_debug_port: - port_map_tried |= (1<<(debug_port - 1)); - new_debug_port = ((debug_port-1+1)%n_ports) + 1; - if (port_map_tried != ((1<<n_ports) - 1)) { - set_debug_port(new_debug_port); - goto try_next_port; - } - if (--playtimes) { - set_debug_port(new_debug_port); - goto try_next_time; - } - - return -1; -} - -static int __init early_dbgp_init(char *s) -{ - u32 debug_port, bar, offset; - u32 bus, slot, func, cap; - void __iomem *ehci_bar; - u32 dbgp_num; - u32 bar_val; - char *e; - int ret; - u8 byte; - - if (!early_pci_allowed()) - return -1; - - dbgp_num = 0; - if (*s) - dbgp_num = simple_strtoul(s, &e, 10); - dbgp_printk("dbgp_num: %d\n", dbgp_num); - - cap = find_dbgp(dbgp_num, &bus, &slot, &func); - if (!cap) - return -1; - - dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot, - func); - - debug_port = read_pci_config(bus, slot, func, cap); - bar = (debug_port >> 29) & 0x7; - bar = (bar * 4) + 0xc; - offset = (debug_port >> 16) & 0xfff; - dbgp_printk("bar: %02x offset: %03x\n", bar, offset); - if (bar != PCI_BASE_ADDRESS_0) { - dbgp_printk("only debug ports on bar 1 handled.\n"); - - return -1; - } - - bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); - dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); - if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { - dbgp_printk("only simple 32bit mmio bars supported\n"); - - return -1; - } - - /* double check if the mem space is enabled */ - byte = read_pci_config_byte(bus, slot, func, 0x04); - if (!(byte & 0x2)) { - byte |= 0x02; - write_pci_config_byte(bus, slot, func, 0x04, byte); - dbgp_printk("mmio for ehci enabled\n"); - } - - /* - * FIXME I don't have the bar size so just guess PAGE_SIZE is more - * than enough. 1K is the biggest I have seen. - */ - set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); - ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); - ehci_bar += bar_val & ~PAGE_MASK; - dbgp_printk("ehci_bar: %p\n", ehci_bar); - - ehci_caps = ehci_bar; - ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); - ehci_debug = ehci_bar + offset; - ehci_dev.bus = bus; - ehci_dev.slot = slot; - ehci_dev.func = func; - - detect_set_debug_port(); - - ret = ehci_setup(); - if (ret < 0) { - dbgp_printk("ehci_setup failed\n"); - ehci_debug = NULL; - - return -1; - } - - return 0; -} - -static void early_dbgp_write(struct console *con, const char *str, u32 n) -{ - int chunk, ret; - - if (!ehci_debug) - return; - while (n > 0) { - chunk = n; - if (chunk > DBGP_MAX_PACKET) - chunk = DBGP_MAX_PACKET; - ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, - dbgp_endpoint_out, str, chunk); - str += chunk; - n -= chunk; - } -} - -static struct console early_dbgp_console = { - .name = "earlydbg", - .write = early_dbgp_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; -#endif - /* Direct interface for emergencies */ static struct console *early_console = &early_vga_console; static int __initdata early_console_initialized; diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index dbe4fb694ad2..be3c9b80bc9f 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ +obj-y += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/drivers/usb/early/Makefile b/drivers/usb/early/Makefile new file mode 100644 index 000000000000..dfedee8c45b6 --- /dev/null +++ b/drivers/usb/early/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for early USB devices +# + +obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c new file mode 100644 index 000000000000..821b7b21c29c --- /dev/null +++ b/drivers/usb/early/ehci-dbgp.c @@ -0,0 +1,723 @@ +#include <linux/console.h> +#include <linux/errno.h> +#include <linux/pci_regs.h> +#include <linux/pci_ids.h> +#include <linux/usb/ch9.h> +#include <linux/usb/ehci_def.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/pci-direct.h> +#include <asm/fixmap.h> + +static struct ehci_caps __iomem *ehci_caps; +static struct ehci_regs __iomem *ehci_regs; +static struct ehci_dbg_port __iomem *ehci_debug; +static unsigned int dbgp_endpoint_out; + +struct ehci_dev { + u32 bus; + u32 slot; + u32 func; +}; + +static struct ehci_dev ehci_dev; + +#define USB_DEBUG_DEVNUM 127 + +#define DBGP_DATA_TOGGLE 0x8800 + +static inline u32 dbgp_pid_update(u32 x, u32 tok) +{ + return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); +} + +static inline u32 dbgp_len_update(u32 x, u32 len) +{ + return (x & ~0x0f) | (len & 0x0f); +} + +/* + * USB Packet IDs (PIDs) + */ + +/* token */ +#define USB_PID_OUT 0xe1 +#define USB_PID_IN 0x69 +#define USB_PID_SOF 0xa5 +#define USB_PID_SETUP 0x2d +/* handshake */ +#define USB_PID_ACK 0xd2 +#define USB_PID_NAK 0x5a +#define USB_PID_STALL 0x1e +#define USB_PID_NYET 0x96 +/* data */ +#define USB_PID_DATA0 0xc3 +#define USB_PID_DATA1 0x4b +#define USB_PID_DATA2 0x87 +#define USB_PID_MDATA 0x0f +/* Special */ +#define USB_PID_PREAMBLE 0x3c +#define USB_PID_ERR 0x3c +#define USB_PID_SPLIT 0x78 +#define USB_PID_PING 0xb4 +#define USB_PID_UNDEF_0 0xf0 + +#define USB_PID_DATA_TOGGLE 0x88 +#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) + +#define PCI_CAP_ID_EHCI_DEBUG 0xa + +#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 500 + +#define DBGP_MAX_PACKET 8 + +static int dbgp_wait_until_complete(void) +{ + u32 ctrl; + int loop = 0x100000; + + do { + ctrl = readl(&ehci_debug->control); + /* Stop when the transaction is finished */ + if (ctrl & DBGP_DONE) + break; + } while (--loop > 0); + + if (!loop) + return -1; + + /* + * Now that we have observed the completed transaction, + * clear the done bit. + */ + writel(ctrl | DBGP_DONE, &ehci_debug->control); + return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); +} + +static void __init dbgp_mdelay(int ms) +{ + int i; + + while (ms--) { + for (i = 0; i < 1000; i++) + outb(0x1, 0x80); + } +} + +static void dbgp_breath(void) +{ + /* Sleep to give the debug port a chance to breathe */ +} + +static int dbgp_wait_until_done(unsigned ctrl) +{ + u32 pids, lpid; + int ret; + int loop = 3; + +retry: + writel(ctrl | DBGP_GO, &ehci_debug->control); + ret = dbgp_wait_until_complete(); + pids = readl(&ehci_debug->pids); + lpid = DBGP_PID_GET(pids); + + if (ret < 0) + return ret; + + /* + * If the port is getting full or it has dropped data + * start pacing ourselves, not necessary but it's friendly. + */ + if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) + dbgp_breath(); + + /* If I get a NACK reissue the transmission */ + if (lpid == USB_PID_NAK) { + if (--loop > 0) + goto retry; + } + + return ret; +} + +static void dbgp_set_data(const void *buf, int size) +{ + const unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = hi = 0; + for (i = 0; i < 4 && i < size; i++) + lo |= bytes[i] << (8*i); + for (; i < 8 && i < size; i++) + hi |= bytes[i] << (8*(i - 4)); + writel(lo, &ehci_debug->data03); + writel(hi, &ehci_debug->data47); +} + +static void __init dbgp_get_data(void *buf, int size) +{ + unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = readl(&ehci_debug->data03); + hi = readl(&ehci_debug->data47); + for (i = 0; i < 4 && i < size; i++) + bytes[i] = (lo >> (8*i)) & 0xff; + for (; i < 8 && i < size; i++) + bytes[i] = (hi >> (8*(i - 4))) & 0xff; +} + +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_OUT); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + dbgp_set_data(bytes, size); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + return ret; +} + +static int __init dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, + int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_IN); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl &= ~DBGP_OUT; + ctrl |= DBGP_GO; + + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + if (size > ret) + size = ret; + dbgp_get_data(data, size); + return ret; +} + +static int __init dbgp_control_msg(unsigned devnum, int requesttype, + int request, int value, int index, void *data, int size) +{ + u32 pids, addr, ctrl; + struct usb_ctrlrequest req; + int read; + int ret; + + read = (requesttype & USB_DIR_IN) != 0; + if (size > (read ? DBGP_MAX_PACKET:0)) + return -1; + + /* Compute the control message */ + req.bRequestType = requesttype; + req.bRequest = request; + req.wValue = cpu_to_le16(value); + req.wIndex = cpu_to_le16(index); + req.wLength = cpu_to_le16(size); + + pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); + addr = DBGP_EPADDR(devnum, 0); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, sizeof(req)); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + /* Send the setup message */ + dbgp_set_data(&req, sizeof(req)); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + /* Read the result */ + return dbgp_bulk_read(devnum, 0, data, size); +} + + +/* Find a PCI capability */ +static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) +{ + u8 pos; + int bytes; + + if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + + pos = read_pci_config_byte(num, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + +static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) +{ + u32 class; + + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); + if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) + return 0; + + return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); +} + +static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) +{ + u32 bus, slot, func; + + for (bus = 0; bus < 256; bus++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + unsigned cap; + + cap = __find_dbgp(bus, slot, func); + + if (!cap) + continue; + if (ehci_num-- != 0) + continue; + *rbus = bus; + *rslot = slot; + *rfunc = func; + return cap; + } + } + } + return 0; +} + +static int __init ehci_reset_port(int port) +{ + u32 portsc; + u32 delay_time, delay; + int loop; + + /* Reset the usb debug port */ + portsc = readl(&ehci_regs->port_status[port - 1]); + portsc &= ~PORT_PE; + portsc |= PORT_RESET; + writel(portsc, &ehci_regs->port_status[port - 1]); + + delay = HUB_ROOT_RESET_TIME; + for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; + delay_time += delay) { + dbgp_mdelay(delay); + + portsc = readl(&ehci_regs->port_status[port - 1]); + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 2; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } + + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; + + /* bomb out completely if something weird happend */ + if ((portsc & PORT_CSC)) + return -EINVAL; + + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; + } + return -EBUSY; +} + +static int __init ehci_wait_for_port(int port) +{ + u32 status; + int ret, reps; + + for (reps = 0; reps < 3; reps++) { + dbgp_mdelay(100); + status = readl(&ehci_regs->status); + if (status & STS_PCD) { + ret = ehci_reset_port(port); + if (ret == 0) + return 0; + } + } + return -ENOTCONN; +} + +#ifdef DBGP_DEBUG +# define dbgp_printk early_printk +#else +static inline void dbgp_printk(const char *fmt, ...) { } +#endif + +typedef void (*set_debug_port_t)(int port); + +static void __init default_set_debug_port(int port) +{ +} + +static set_debug_port_t __initdata set_debug_port = default_set_debug_port; + +static void __init nvidia_set_debug_port(int port) +{ + u32 dword; + dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x74); + dword &= ~(0x0f<<12); + dword |= ((port & 0x0f)<<12); + write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, + dword); + dbgp_printk("set debug port to %d\n", port); +} + +static void __init detect_set_debug_port(void) +{ + u32 vendorid; + + vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x00); + + if ((vendorid & 0xffff) == 0x10de) { + dbgp_printk("using nvidia set_debug_port\n"); + set_debug_port = nvidia_set_debug_port; + } +} + +static int __init ehci_setup(void) +{ + struct usb_debug_descriptor dbgp_desc; + u32 cmd, ctrl, status, portsc, hcs_params; + u32 debug_port, new_debug_port = 0, n_ports; + u32 devnum; + int ret, i; + int loop; + int port_map_tried; + int playtimes = 3; + +try_next_time: + port_map_tried = 0; + +try_next_port: + + hcs_params = readl(&ehci_caps->hcs_params); + debug_port = HCS_DEBUG_PORT(hcs_params); + n_ports = HCS_N_PORTS(hcs_params); + + dbgp_printk("debug_port: %d\n", debug_port); + dbgp_printk("n_ports: %d\n", n_ports); + + for (i = 1; i <= n_ports; i++) { + portsc = readl(&ehci_regs->port_status[i-1]); + dbgp_printk("portstatus%d: %08x\n", i, portsc); + } + + if (port_map_tried && (new_debug_port != debug_port)) { + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + return -1; + } + + loop = 100000; + /* Reset the EHCI controller */ + cmd = readl(&ehci_regs->command); + cmd |= CMD_RESET; + writel(cmd, &ehci_regs->command); + do { + cmd = readl(&ehci_regs->command); + } while ((cmd & CMD_RESET) && (--loop > 0)); + + if (!loop) { + dbgp_printk("can not reset ehci\n"); + return -1; + } + dbgp_printk("ehci reset done\n"); + + /* Claim ownership, but do not enable yet */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_OWNER; + ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); + writel(ctrl, &ehci_debug->control); + + /* Start the ehci running */ + cmd = readl(&ehci_regs->command); + cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + + /* Ensure everything is routed to the EHCI */ + writel(FLAG_CF, &ehci_regs->configured_flag); + + /* Wait until the controller is no longer halted */ + loop = 10; + do { + status = readl(&ehci_regs->status); + } while ((status & STS_HALT) && (--loop > 0)); + + if (!loop) { + dbgp_printk("ehci can be started\n"); + return -1; + } + dbgp_printk("ehci started\n"); + + /* Wait for a device to show up in the debug port */ + ret = ehci_wait_for_port(debug_port); + if (ret < 0) { + dbgp_printk("No device found in debug port\n"); + goto next_debug_port; + } + dbgp_printk("ehci wait for port done\n"); + + /* Enable the debug port */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_CLAIM; + writel(ctrl, &ehci_debug->control); + ctrl = readl(&ehci_debug->control); + if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { + dbgp_printk("No device in debug port\n"); + writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); + goto err; + } + dbgp_printk("debug ported enabled\n"); + + /* Completely transfer the debug device to the debug controller */ + portsc = readl(&ehci_regs->port_status[debug_port - 1]); + portsc &= ~PORT_PE; + writel(portsc, &ehci_regs->port_status[debug_port - 1]); + + dbgp_mdelay(100); + + /* Find the debug device and make it device number 127 */ + for (devnum = 0; devnum <= 127; devnum++) { + ret = dbgp_control_msg(devnum, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, + &dbgp_desc, sizeof(dbgp_desc)); + if (ret > 0) + break; + } + if (devnum > 127) { + dbgp_printk("Could not find attached debug device\n"); + goto err; + } + if (ret < 0) { + dbgp_printk("Attached device is not a debug device\n"); + goto err; + } + dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; + + /* Move the device to 127 if it isn't already there */ + if (devnum != USB_DEBUG_DEVNUM) { + ret = dbgp_control_msg(devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); + if (ret < 0) { + dbgp_printk("Could not move attached device to %d\n", + USB_DEBUG_DEVNUM); + goto err; + } + devnum = USB_DEBUG_DEVNUM; + dbgp_printk("debug device renamed to 127\n"); + } + + /* Enable the debug interface */ + ret = dbgp_control_msg(USB_DEBUG_DEVNUM, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); + if (ret < 0) { + dbgp_printk(" Could not enable the debug device\n"); + goto err; + } + dbgp_printk("debug interface enabled\n"); + + /* Perform a small write to get the even/odd data state in sync + */ + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); + if (ret < 0) { + dbgp_printk("dbgp_bulk_write failed: %d\n", ret); + goto err; + } + dbgp_printk("small write doned\n"); + + return 0; +err: + /* Things didn't work so remove my claim */ + ctrl = readl(&ehci_debug->control); + ctrl &= ~(DBGP_CLAIM | DBGP_OUT); + writel(ctrl, &ehci_debug->control); + return -1; + +next_debug_port: + port_map_tried |= (1<<(debug_port - 1)); + new_debug_port = ((debug_port-1+1)%n_ports) + 1; + if (port_map_tried != ((1<<n_ports) - 1)) { + set_debug_port(new_debug_port); + goto try_next_port; + } + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + + return -1; +} + +int __init early_dbgp_init(char *s) +{ + u32 debug_port, bar, offset; + u32 bus, slot, func, cap; + void __iomem *ehci_bar; + u32 dbgp_num; + u32 bar_val; + char *e; + int ret; + u8 byte; + + if (!early_pci_allowed()) + return -1; + + dbgp_num = 0; + if (*s) + dbgp_num = simple_strtoul(s, &e, 10); + dbgp_printk("dbgp_num: %d\n", dbgp_num); + + cap = find_dbgp(dbgp_num, &bus, &slot, &func); + if (!cap) + return -1; + + dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot, + func); + + debug_port = read_pci_config(bus, slot, func, cap); + bar = (debug_port >> 29) & 0x7; + bar = (bar * 4) + 0xc; + offset = (debug_port >> 16) & 0xfff; + dbgp_printk("bar: %02x offset: %03x\n", bar, offset); + if (bar != PCI_BASE_ADDRESS_0) { + dbgp_printk("only debug ports on bar 1 handled.\n"); + + return -1; + } + + bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); + if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { + dbgp_printk("only simple 32bit mmio bars supported\n"); + + return -1; + } + + /* double check if the mem space is enabled */ + byte = read_pci_config_byte(bus, slot, func, 0x04); + if (!(byte & 0x2)) { + byte |= 0x02; + write_pci_config_byte(bus, slot, func, 0x04, byte); + dbgp_printk("mmio for ehci enabled\n"); + } + + /* + * FIXME I don't have the bar size so just guess PAGE_SIZE is more + * than enough. 1K is the biggest I have seen. + */ + set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); + ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); + ehci_bar += bar_val & ~PAGE_MASK; + dbgp_printk("ehci_bar: %p\n", ehci_bar); + + ehci_caps = ehci_bar; + ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); + ehci_debug = ehci_bar + offset; + ehci_dev.bus = bus; + ehci_dev.slot = slot; + ehci_dev.func = func; + + detect_set_debug_port(); + + ret = ehci_setup(); + if (ret < 0) { + dbgp_printk("ehci_setup failed\n"); + ehci_debug = NULL; + + return -1; + } + + return 0; +} + +static void early_dbgp_write(struct console *con, const char *str, u32 n) +{ + int chunk, ret; + + if (!ehci_debug) + return; + while (n > 0) { + chunk = n; + if (chunk > DBGP_MAX_PACKET) + chunk = DBGP_MAX_PACKET; + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, + dbgp_endpoint_out, str, chunk); + str += chunk; + n -= chunk; + } +} + +struct console early_dbgp_console = { + .name = "earlydbg", + .write = early_dbgp_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 4c4b701ff265..1deac2a7b12e 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -170,4 +170,10 @@ struct ehci_dbg_port { #define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) } __attribute__ ((packed)); +#ifdef CONFIG_EARLY_PRINTK_DBGP +#include <linux/init.h> +extern int __init early_dbgp_init(char *s); +extern struct console early_dbgp_console; +#endif /* CONFIG_EARLY_PRINTK_DBGP */ + #endif /* __LINUX_USB_EHCI_DEF_H */ |