diff options
36 files changed, 4173 insertions, 999 deletions
diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt new file mode 100644 index 000000000000..9a599d27bd75 --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt @@ -0,0 +1,13 @@ +* QNAP Power Off + +QNAP NAS devices have a microcontroller controlling the main power +supply. This microcontroller is connected to UART1 of the Kirkwood and +Orion5x SoCs. Sending the charactor 'A', at 19200 baud, tells the +microcontroller to turn the power off. This driver adds a handler to +pm_power_off which is called to turn the power off. + +Required Properties: +- compatible: Should be "qnap,power-off" + +- reg: Address and length of the register set for UART1 +- clocks: tclk clock diff --git a/Documentation/devicetree/bindings/power_supply/restart-poweroff.txt b/Documentation/devicetree/bindings/power_supply/restart-poweroff.txt new file mode 100644 index 000000000000..5776e684afda --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/restart-poweroff.txt @@ -0,0 +1,8 @@ +* Restart Power Off + +Buffalo Linkstation LS-XHL and LS-CHLv2, and other devices power off +by restarting and letting u-boot keep hold of the machine until the +user presses a button. + +Required Properties: +- compatible: Should be "restart-poweroff" diff --git a/MAINTAINERS b/MAINTAINERS index b7013e41b623..b1f98503ebda 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7612,6 +7612,22 @@ F: Documentation/backlight/lp855x-driver.txt F: drivers/video/backlight/lp855x_bl.c F: include/linux/platform_data/lp855x.h +TI LP8727 CHARGER DRIVER +M: Milo Kim <milo.kim@ti.com> +S: Maintained +F: drivers/power/lp8727_charger.c +F: include/linux/platform_data/lp8727.h + +TI LP8788 MFD DRIVER +M: Milo Kim <milo.kim@ti.com> +S: Maintained +F: drivers/iio/adc/lp8788_adc.c +F: drivers/leds/leds-lp8788.c +F: drivers/mfd/lp8788*.c +F: drivers/power/lp8788-charger.c +F: drivers/regulator/lp8788-*.c +F: include/linux/mfd/lp8788*.h + TI TWL4030 SERIES SOC CODEC DRIVER M: Peter Ujfalusi <peter.ujfalusi@ti.com> L: alsa-devel@alsa-project.org (moderated for non-subscribers) diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 4778bb124efe..8b5d685ab980 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -750,6 +750,12 @@ static struct resource ab8500_charger_resources[] = { .end = AB8500_INT_CH_WD_EXP, .flags = IORESOURCE_IRQ, }, + { + .name = "VBUS_CH_DROP_END", + .start = AB8500_INT_VBUS_CH_DROP_END, + .end = AB8500_INT_VBUS_CH_DROP_END, + .flags = IORESOURCE_IRQ, + }, }; static struct resource ab8500_btemp_resources[] = { @@ -1012,40 +1018,32 @@ static struct mfd_cell ab8500_bm_devs[] = { .of_compatible = "stericsson,ab8500-charger", .num_resources = ARRAY_SIZE(ab8500_charger_resources), .resources = ab8500_charger_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-btemp", .of_compatible = "stericsson,ab8500-btemp", .num_resources = ARRAY_SIZE(ab8500_btemp_resources), .resources = ab8500_btemp_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-fg", .of_compatible = "stericsson,ab8500-fg", .num_resources = ARRAY_SIZE(ab8500_fg_resources), .resources = ab8500_fg_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, { .name = "ab8500-chargalg", .of_compatible = "stericsson,ab8500-chargalg", .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), .resources = ab8500_chargalg_resources, -#ifndef CONFIG_OF .platform_data = &ab8500_bm_data, .pdata_size = sizeof(ab8500_bm_data), -#endif }, }; diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c index 8bc80b05c63c..d338c1c4e8c8 100644 --- a/drivers/power/88pm860x_battery.c +++ b/drivers/power/88pm860x_battery.c @@ -915,15 +915,13 @@ static int pm860x_battery_probe(struct platform_device *pdev) info->irq_cc = platform_get_irq(pdev, 0); if (info->irq_cc <= 0) { dev_err(&pdev->dev, "No IRQ resource!\n"); - ret = -EINVAL; - goto out; + return -EINVAL; } info->irq_batt = platform_get_irq(pdev, 1); if (info->irq_batt <= 0) { dev_err(&pdev->dev, "No IRQ resource!\n"); - ret = -EINVAL; - goto out; + return -EINVAL; } info->chip = chip; @@ -957,7 +955,7 @@ static int pm860x_battery_probe(struct platform_device *pdev) ret = power_supply_register(&pdev->dev, &info->battery); if (ret) - goto out; + return ret; info->battery.dev->parent = &pdev->dev; ret = request_threaded_irq(info->irq_cc, NULL, @@ -984,8 +982,6 @@ out_coulomb: free_irq(info->irq_cc, info); out_reg: power_supply_unregister(&info->battery); -out: - kfree(info); return ret; } @@ -993,10 +989,9 @@ static int pm860x_battery_remove(struct platform_device *pdev) { struct pm860x_battery_info *info = platform_get_drvdata(pdev); - power_supply_unregister(&info->battery); free_irq(info->irq_batt, info); free_irq(info->irq_cc, info); - kfree(info); + power_supply_unregister(&info->battery); platform_set_drvdata(pdev, NULL); return 0; } diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 9f45e2f77d53..9e00c389e777 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -346,6 +346,20 @@ config AB8500_BM help Say Y to include support for AB8500 battery management. +config BATTERY_GOLDFISH + tristate "Goldfish battery driver" + depends on GENERIC_HARDIRQS + help + Say Y to enable support for the battery and AC power in the + Goldfish emulator. + +config CHARGER_PM2301 + bool "PM2301 Battery Charger Driver" + depends on AB8500_BM + help + Say Y to include support for PM2301 charger driver. + Depends on AB8500 battery management core. + source "drivers/power/reset/Kconfig" endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 22c8913382c0..3f66436af45c 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o +obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o @@ -38,7 +39,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o -obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o +obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o @@ -46,6 +47,7 @@ obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o +obj-$(CONFIG_CHARGER_PM2301) += pm2301_charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index f034ae43e045..7a96c0650fbb 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -182,206 +182,206 @@ static struct batres_vs_temp temp_to_batres_tbl_9100[] = { }; static struct abx500_battery_type bat_type_thermistor[] = { -[BATTERY_UNKNOWN] = { - /* First element always represent the UNKNOWN battery */ - .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, - .resis_high = 0, - .resis_low = 0, - .battery_resistance = 300, - .charge_full_design = 612, - .nominal_voltage = 3700, - .termination_vol = 4050, - .termination_curr = 200, - .recharge_vol = 3990, - .normal_cur_lvl = 400, - .normal_vol_lvl = 4100, - .maint_a_cur_lvl = 400, - .maint_a_vol_lvl = 4050, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 400, - .maint_b_vol_lvl = 4000, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LIPO, - .resis_high = 53407, - .resis_low = 12500, - .battery_resistance = 300, - .charge_full_design = 900, - .nominal_voltage = 3600, - .termination_vol = 4150, - .termination_curr = 80, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor), - .r_to_t_tbl = temp_tbl_A_thermistor, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor), - .v_to_cap_tbl = cap_tbl_A_thermistor, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, + [BATTERY_UNKNOWN] = { + /* First element always represent the UNKNOWN battery */ + .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, + .resis_high = 0, + .resis_low = 0, + .battery_resistance = 300, + .charge_full_design = 612, + .nominal_voltage = 3700, + .termination_vol = 4050, + .termination_curr = 200, + .recharge_cap = 95, + .normal_cur_lvl = 400, + .normal_vol_lvl = 4100, + .maint_a_cur_lvl = 400, + .maint_a_vol_lvl = 4050, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 400, + .maint_b_vol_lvl = 4000, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 53407, + .resis_low = 12500, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3600, + .termination_vol = 4150, + .termination_curr = 80, + .recharge_cap = 95, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor), + .r_to_t_tbl = temp_tbl_A_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor), + .v_to_cap_tbl = cap_tbl_A_thermistor, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LIPO, - .resis_high = 200000, - .resis_low = 82869, - .battery_resistance = 300, - .charge_full_design = 900, - .nominal_voltage = 3600, - .termination_vol = 4150, - .termination_curr = 80, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor), - .r_to_t_tbl = temp_tbl_B_thermistor, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor), - .v_to_cap_tbl = cap_tbl_B_thermistor, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 200000, + .resis_low = 82869, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3600, + .termination_vol = 4150, + .termination_curr = 80, + .recharge_cap = 95, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor), + .r_to_t_tbl = temp_tbl_B_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor), + .v_to_cap_tbl = cap_tbl_B_thermistor, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, }; static struct abx500_battery_type bat_type_ext_thermistor[] = { -[BATTERY_UNKNOWN] = { - /* First element always represent the UNKNOWN battery */ - .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, - .resis_high = 0, - .resis_low = 0, - .battery_resistance = 300, - .charge_full_design = 612, - .nominal_voltage = 3700, - .termination_vol = 4050, - .termination_curr = 200, - .recharge_vol = 3990, - .normal_cur_lvl = 400, - .normal_vol_lvl = 4100, - .maint_a_cur_lvl = 400, - .maint_a_vol_lvl = 4050, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 400, - .maint_b_vol_lvl = 4000, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, + [BATTERY_UNKNOWN] = { + /* First element always represent the UNKNOWN battery */ + .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN, + .resis_high = 0, + .resis_low = 0, + .battery_resistance = 300, + .charge_full_design = 612, + .nominal_voltage = 3700, + .termination_vol = 4050, + .termination_curr = 200, + .recharge_cap = 95, + .normal_cur_lvl = 400, + .normal_vol_lvl = 4100, + .maint_a_cur_lvl = 400, + .maint_a_vol_lvl = 4050, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 400, + .maint_b_vol_lvl = 4000, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, /* * These are the batteries that doesn't have an internal NTC resistor to measure * its temperature. The temperature in this case is measure with a NTC placed * near the battery but on the PCB. */ -{ - .name = POWER_SUPPLY_TECHNOLOGY_LIPO, - .resis_high = 76000, - .resis_low = 53000, - .battery_resistance = 300, - .charge_full_design = 900, - .nominal_voltage = 3700, - .termination_vol = 4150, - .termination_curr = 100, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LION, - .resis_high = 30000, - .resis_low = 10000, - .battery_resistance = 300, - .charge_full_design = 950, - .nominal_voltage = 3700, - .termination_vol = 4150, - .termination_curr = 100, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, -{ - .name = POWER_SUPPLY_TECHNOLOGY_LION, - .resis_high = 95000, - .resis_low = 76001, - .battery_resistance = 300, - .charge_full_design = 950, - .nominal_voltage = 3700, - .termination_vol = 4150, - .termination_curr = 100, - .recharge_vol = 4130, - .normal_cur_lvl = 700, - .normal_vol_lvl = 4200, - .maint_a_cur_lvl = 600, - .maint_a_vol_lvl = 4150, - .maint_a_chg_timer_h = 60, - .maint_b_cur_lvl = 600, - .maint_b_vol_lvl = 4100, - .maint_b_chg_timer_h = 200, - .low_high_cur_lvl = 300, - .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), - .r_to_t_tbl = temp_tbl, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), - .v_to_cap_tbl = cap_tbl, - .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), - .batres_tbl = temp_to_batres_tbl_thermistor, -}, + { + .name = POWER_SUPPLY_TECHNOLOGY_LIPO, + .resis_high = 76000, + .resis_low = 53000, + .battery_resistance = 300, + .charge_full_design = 900, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_cap = 95, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LION, + .resis_high = 30000, + .resis_low = 10000, + .battery_resistance = 300, + .charge_full_design = 950, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_cap = 95, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, + { + .name = POWER_SUPPLY_TECHNOLOGY_LION, + .resis_high = 95000, + .resis_low = 76001, + .battery_resistance = 300, + .charge_full_design = 950, + .nominal_voltage = 3700, + .termination_vol = 4150, + .termination_curr = 100, + .recharge_cap = 95, + .normal_cur_lvl = 700, + .normal_vol_lvl = 4200, + .maint_a_cur_lvl = 600, + .maint_a_vol_lvl = 4150, + .maint_a_chg_timer_h = 60, + .maint_b_cur_lvl = 600, + .maint_b_vol_lvl = 4100, + .maint_b_chg_timer_h = 200, + .low_high_cur_lvl = 300, + .low_high_vol_lvl = 4000, + .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl), + .r_to_t_tbl = temp_tbl, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl), + .v_to_cap_tbl = cap_tbl, + .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), + .batres_tbl = temp_to_batres_tbl_thermistor, + }, }; static const struct abx500_bm_capacity_levels cap_levels = { @@ -405,8 +405,8 @@ static const struct abx500_fg_parameters fg = { .lowbat_threshold = 3100, .battok_falling_th_sel0 = 2860, .battok_raising_th_sel1 = 2860, + .maint_thres = 95, .user_cap_limit = 15, - .maint_thres = 97, }; static const struct abx500_maxim_parameters maxi_params = { @@ -424,96 +424,84 @@ static const struct abx500_bm_charger_parameters chg = { }; struct abx500_bm_data ab8500_bm_data = { - .temp_under = 3, - .temp_low = 8, - .temp_high = 43, - .temp_over = 48, - .main_safety_tmr_h = 4, - .temp_interval_chg = 20, - .temp_interval_nochg = 120, - .usb_safety_tmr_h = 4, - .bkup_bat_v = BUP_VCH_SEL_2P6V, - .bkup_bat_i = BUP_ICH_SEL_150UA, - .no_maintenance = false, - .adc_therm = ABx500_ADC_THERM_BATCTRL, - .chg_unknown_bat = false, - .enable_overshoot = false, - .fg_res = 100, - .cap_levels = &cap_levels, - .bat_type = bat_type_thermistor, - .n_btypes = 3, - .batt_id = 0, - .interval_charging = 5, - .interval_not_charging = 120, - .temp_hysteresis = 3, - .gnd_lift_resistance = 34, - .maxi = &maxi_params, - .chg_params = &chg, - .fg_params = &fg, + .temp_under = 3, + .temp_low = 8, + .temp_high = 43, + .temp_over = 48, + .main_safety_tmr_h = 4, + .temp_interval_chg = 20, + .temp_interval_nochg = 120, + .usb_safety_tmr_h = 4, + .bkup_bat_v = BUP_VCH_SEL_2P6V, + .bkup_bat_i = BUP_ICH_SEL_150UA, + .no_maintenance = false, + .capacity_scaling = false, + .adc_therm = ABx500_ADC_THERM_BATCTRL, + .chg_unknown_bat = false, + .enable_overshoot = false, + .fg_res = 100, + .cap_levels = &cap_levels, + .bat_type = bat_type_thermistor, + .n_btypes = 3, + .batt_id = 0, + .interval_charging = 5, + .interval_not_charging = 120, + .temp_hysteresis = 3, + .gnd_lift_resistance = 34, + .maxi = &maxi_params, + .chg_params = &chg, + .fg_params = &fg, }; -int bmdevs_of_probe(struct device *dev, struct device_node *np, - struct abx500_bm_data **battery) +int ab8500_bm_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_data *bm) { - struct abx500_battery_type *btype; - struct device_node *np_bat_supply; - struct abx500_bm_data *bat; + struct batres_vs_temp *tmp_batres_tbl; + struct device_node *battery_node; const char *btech; - char bat_tech[8]; - int i, thermistor; - - *battery = &ab8500_bm_data; + int i; /* get phandle to 'battery-info' node */ - np_bat_supply = of_parse_phandle(np, "battery", 0); - if (!np_bat_supply) { - dev_err(dev, "missing property battery\n"); + battery_node = of_parse_phandle(np, "battery", 0); + if (!battery_node) { + dev_err(dev, "battery node or reference missing\n"); return -EINVAL; } - if (of_property_read_bool(np_bat_supply, - "thermistor-on-batctrl")) - thermistor = NTC_INTERNAL; - else - thermistor = NTC_EXTERNAL; - bat = *battery; - if (thermistor == NTC_EXTERNAL) { - bat->n_btypes = 4; - bat->bat_type = bat_type_ext_thermistor; - bat->adc_therm = ABx500_ADC_THERM_BATTEMP; - } - btech = of_get_property(np_bat_supply, - "stericsson,battery-type", NULL); + btech = of_get_property(battery_node, "stericsson,battery-type", NULL); if (!btech) { dev_warn(dev, "missing property battery-name/type\n"); - strcpy(bat_tech, "UNKNOWN"); - } else { - strcpy(bat_tech, btech); + return -EINVAL; } - if (strncmp(bat_tech, "LION", 4) == 0) { - bat->no_maintenance = true; - bat->chg_unknown_bat = true; - bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600; - bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150; - bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130; - bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520; - bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; + if (strncmp(btech, "LION", 4) == 0) { + bm->no_maintenance = true; + bm->chg_unknown_bat = true; + bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600; + bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150; + bm->bat_type[BATTERY_UNKNOWN].recharge_cap = 95; + bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520; + bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200; } - /* select the battery resolution table */ - for (i = 0; i < bat->n_btypes; ++i) { - btype = (bat->bat_type + i); - if (thermistor == NTC_EXTERNAL) { - btype->batres_tbl = - temp_to_batres_tbl_ext_thermistor; - } else if (strncmp(bat_tech, "LION", 4) == 0) { - btype->batres_tbl = - temp_to_batres_tbl_9100; - } else { - btype->batres_tbl = - temp_to_batres_tbl_thermistor; - } + + if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) { + if (strncmp(btech, "LION", 4) == 0) + tmp_batres_tbl = temp_to_batres_tbl_9100; + else + tmp_batres_tbl = temp_to_batres_tbl_thermistor; + } else { + bm->n_btypes = 4; + bm->bat_type = bat_type_ext_thermistor; + bm->adc_therm = ABx500_ADC_THERM_BATTEMP; + tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor; } - of_node_put(np_bat_supply); + + /* select the battery resolution table */ + for (i = 0; i < bm->n_btypes; ++i) + bm->bat_type[i].batres_tbl = tmp_batres_tbl; + + of_node_put(battery_node); + return 0; } diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 20e2a7d3ef43..07689064996e 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -39,6 +39,9 @@ #define BTEMP_BATCTRL_CURR_SRC_7UA 7 #define BTEMP_BATCTRL_CURR_SRC_20UA 20 +#define BTEMP_BATCTRL_CURR_SRC_16UA 16 +#define BTEMP_BATCTRL_CURR_SRC_18UA 18 + #define to_ab8500_btemp_device_info(x) container_of((x), \ struct ab8500_btemp, btemp_psy); @@ -78,12 +81,13 @@ struct ab8500_btemp_ranges { * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc * @fg: Pointer to the struct fg - * @bat: Pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @btemp_psy: Structure for BTEMP specific battery properties * @events: Structure for information about events triggered * @btemp_ranges: Battery temperature range structure * @btemp_wq: Work queue for measuring the temperature periodically * @btemp_periodic_work: Work for measuring the temperature periodically + * @initialized: True if battery id read. */ struct ab8500_btemp { struct device *dev; @@ -94,12 +98,13 @@ struct ab8500_btemp { struct ab8500 *parent; struct ab8500_gpadc *gpadc; struct ab8500_fg *fg; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct power_supply btemp_psy; struct ab8500_btemp_events events; struct ab8500_btemp_ranges btemp_ranges; struct workqueue_struct *btemp_wq; struct delayed_work btemp_periodic_work; + bool initialized; }; /* BTEMP power supply properties */ @@ -147,13 +152,13 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, return (450000 * (v_batctrl)) / (1800 - v_batctrl); } - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) { + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) { /* * If the battery has internal NTC, we use the current * source to calculate the resistance, 7uA or 20uA */ rbs = (v_batctrl * 1000 - - di->bat->gnd_lift_resistance * inst_curr) + - di->bm->gnd_lift_resistance * inst_curr) / di->curr_source; } else { /* @@ -209,11 +214,19 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, return 0; /* Only do this for batteries with internal NTC */ - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { - if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) - curr = BAT_CTRL_7U_ENA; - else - curr = BAT_CTRL_20U_ENA; + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { + + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA) + curr = BAT_CTRL_16U_ENA; + else + curr = BAT_CTRL_18U_ENA; + } else { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) + curr = BAT_CTRL_7U_ENA; + else + curr = BAT_CTRL_20U_ENA; + } dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source); @@ -241,14 +254,25 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, __func__); goto disable_curr_source; } - } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { + } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { dev_dbg(di->dev, "Disable BATCTRL curr source\n"); - /* Write 0 to the curr bits */ - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, - ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA, + ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA)); + } else { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + } + if (ret) { dev_err(di->dev, "%s failed disabling current source\n", __func__); @@ -290,11 +314,20 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, * if we got an error above */ disable_curr_source: - /* Write 0 to the curr bits */ - ret = abx500_mask_and_set_register_interruptible(di->dev, + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA, + ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA)); + } else { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + } + if (ret) { dev_err(di->dev, "%s failed disabling current source\n", __func__); @@ -372,13 +405,10 @@ static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di) return ret; } - /* - * Since there is no interrupt when current measurement is done, - * loop for over 250ms (250ms is one sample conversion time - * with 32.768 Khz RTC clock). Note that a stop time must be set - * since the ab8500_btemp_read_batctrl_voltage call can block and - * take an unknown amount of time to complete. - */ + do { + msleep(20); + } while (!ab8500_fg_inst_curr_started(di->fg)); + i = 0; do { @@ -457,9 +487,9 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) int rbat, rntc, vntc; u8 id; - id = di->bat->batt_id; + id = di->bm->batt_id; - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && id != BATTERY_UNKNOWN) { rbat = ab8500_btemp_get_batctrl_res(di); @@ -474,8 +504,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) } temp = ab8500_btemp_res_to_temp(di, - di->bat->bat_type[id].r_to_t_tbl, - di->bat->bat_type[id].n_temp_tbl_elements, rbat); + di->bm->bat_type[id].r_to_t_tbl, + di->bm->bat_type[id].n_temp_tbl_elements, rbat); } else { vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL); if (vntc < 0) { @@ -491,8 +521,8 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) rntc = 230000 * vntc / (VTVOUT_V - vntc); temp = ab8500_btemp_res_to_temp(di, - di->bat->bat_type[id].r_to_t_tbl, - di->bat->bat_type[id].n_temp_tbl_elements, rntc); + di->bm->bat_type[id].r_to_t_tbl, + di->bm->bat_type[id].n_temp_tbl_elements, rntc); prev = temp; } dev_dbg(di->dev, "Battery temperature is %d\n", temp); @@ -511,9 +541,12 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) { int res; u8 i; + if (is_ab9540(di->parent) || is_ab8505(di->parent)) + di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; + else + di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; - di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; - di->bat->batt_id = BATTERY_UNKNOWN; + di->bm->batt_id = BATTERY_UNKNOWN; res = ab8500_btemp_get_batctrl_res(di); if (res < 0) { @@ -522,23 +555,23 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) } /* BATTERY_UNKNOWN is defined on position 0, skip it! */ - for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) { - if ((res <= di->bat->bat_type[i].resis_high) && - (res >= di->bat->bat_type[i].resis_low)) { + for (i = BATTERY_UNKNOWN + 1; i < di->bm->n_btypes; i++) { + if ((res <= di->bm->bat_type[i].resis_high) && + (res >= di->bm->bat_type[i].resis_low)) { dev_dbg(di->dev, "Battery detected on %s" " low %d < res %d < high: %d" " index: %d\n", - di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ? + di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL ? "BATCTRL" : "BATTEMP", - di->bat->bat_type[i].resis_low, res, - di->bat->bat_type[i].resis_high, i); + di->bm->bat_type[i].resis_low, res, + di->bm->bat_type[i].resis_high, i); - di->bat->batt_id = i; + di->bm->batt_id = i; break; } } - if (di->bat->batt_id == BATTERY_UNKNOWN) { + if (di->bm->batt_id == BATTERY_UNKNOWN) { dev_warn(di->dev, "Battery identified as unknown" ", resistance %d Ohm\n", res); return -ENXIO; @@ -548,13 +581,18 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) * We only have to change current source if the * detected type is Type 1, else we use the 7uA source */ - if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && - di->bat->batt_id == 1) { - dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); - di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; + if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && + di->bm->batt_id == 1) { + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; + } else { + dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; + } } - return di->bat->batt_id; + return di->bm->batt_id; } /** @@ -569,6 +607,13 @@ static void ab8500_btemp_periodic_work(struct work_struct *work) struct ab8500_btemp *di = container_of(work, struct ab8500_btemp, btemp_periodic_work.work); + if (!di->initialized) { + di->initialized = true; + /* Identify the battery */ + if (ab8500_btemp_id(di) < 0) + dev_warn(di->dev, "failed to identify the battery\n"); + } + di->bat_temp = ab8500_btemp_measure_temp(di); if (di->bat_temp != di->prev_bat_temp) { @@ -577,9 +622,9 @@ static void ab8500_btemp_periodic_work(struct work_struct *work) } if (di->events.ac_conn || di->events.usb_conn) - interval = di->bat->temp_interval_chg; + interval = di->bm->temp_interval_chg; else - interval = di->bat->temp_interval_nochg; + interval = di->bm->temp_interval_nochg; /* Schedule a new measurement */ queue_delayed_work(di->btemp_wq, @@ -616,9 +661,9 @@ static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di) { struct ab8500_btemp *di = _di; - if (is_ab8500_2p0_or_earlier(di->parent)) { + if (is_ab8500_3p3_or_earlier(di->parent)) { dev_dbg(di->dev, "Ignore false btemp low irq" - " for ABB cut 1.0, 1.1 and 2.0\n"); + " for ABB cut 1.0, 1.1, 2.0 and 3.3\n"); } else { dev_crit(di->dev, "Battery temperature lower than -10deg c\n"); @@ -732,30 +777,30 @@ static int ab8500_btemp_get_temp(struct ab8500_btemp *di) int temp = 0; /* - * The BTEMP events are not reliabe on AB8500 cut2.0 + * The BTEMP events are not reliabe on AB8500 cut3.3 * and prior versions */ - if (is_ab8500_2p0_or_earlier(di->parent)) { + if (is_ab8500_3p3_or_earlier(di->parent)) { temp = di->bat_temp * 10; } else { if (di->events.btemp_low) { if (temp > di->btemp_ranges.btemp_low_limit) - temp = di->btemp_ranges.btemp_low_limit; + temp = di->btemp_ranges.btemp_low_limit * 10; else temp = di->bat_temp * 10; } else if (di->events.btemp_high) { if (temp < di->btemp_ranges.btemp_high_limit) - temp = di->btemp_ranges.btemp_high_limit; + temp = di->btemp_ranges.btemp_high_limit * 10; else temp = di->bat_temp * 10; } else if (di->events.btemp_lowmed) { if (temp > di->btemp_ranges.btemp_med_limit) - temp = di->btemp_ranges.btemp_med_limit; + temp = di->btemp_ranges.btemp_med_limit * 10; else temp = di->bat_temp * 10; } else if (di->events.btemp_medhigh) { if (temp < di->btemp_ranges.btemp_med_limit) - temp = di->btemp_ranges.btemp_med_limit; + temp = di->btemp_ranges.btemp_med_limit * 10; else temp = di->bat_temp * 10; } else @@ -806,7 +851,7 @@ static int ab8500_btemp_get_property(struct power_supply *psy, val->intval = 1; break; case POWER_SUPPLY_PROP_TECHNOLOGY: - val->intval = di->bat->bat_type[di->bat->batt_id].name; + val->intval = di->bm->bat_type[di->bm->batt_id].name; break; case POWER_SUPPLY_PROP_TEMP: val->intval = ab8500_btemp_get_temp(di); @@ -967,6 +1012,7 @@ static char *supply_interface[] = { static int ab8500_btemp_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct ab8500_btemp *di; int irq, i, ret = 0; u8 val; @@ -976,21 +1022,19 @@ static int ab8500_btemp_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { - if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); } /* get parent data */ @@ -998,6 +1042,8 @@ static int ab8500_btemp_probe(struct platform_device *pdev) di->parent = dev_get_drvdata(pdev->dev.parent); di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + di->initialized = false; + /* BTEMP supply */ di->btemp_psy.name = "ab8500_btemp"; di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY; @@ -1022,10 +1068,6 @@ static int ab8500_btemp_probe(struct platform_device *pdev) INIT_DEFERRABLE_WORK(&di->btemp_periodic_work, ab8500_btemp_periodic_work); - /* Identify the battery */ - if (ab8500_btemp_id(di) < 0) - dev_warn(di->dev, "failed to identify the battery\n"); - /* Set BTEMP thermal limits. Low and Med are fixed */ di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT; di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT; @@ -1123,7 +1165,7 @@ static void __exit ab8500_btemp_exit(void) platform_driver_unregister(&ab8500_btemp_driver); } -subsys_initcall_sync(ab8500_btemp_init); +device_initcall(ab8500_btemp_init); module_exit(ab8500_btemp_exit); MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index 3be9c0ee3fc5..24b30b7ea5ca 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -31,6 +31,7 @@ #include <linux/mfd/abx500/ab8500-gpadc.h> #include <linux/mfd/abx500/ux500_chargalg.h> #include <linux/usb/otg.h> +#include <linux/mutex.h> /* Charger constants */ #define NO_PW_CONN 0 @@ -54,6 +55,7 @@ #define MAIN_CH_INPUT_CURR_SHIFT 4 #define VBUS_IN_CURR_LIM_SHIFT 4 +#define AUTO_VBUS_IN_CURR_LIM_SHIFT 4 #define LED_INDICATOR_PWM_ENA 0x01 #define LED_INDICATOR_PWM_DIS 0x00 @@ -68,6 +70,11 @@ #define MAIN_CH_NOK 0x01 #define VBUS_DET 0x80 +#define MAIN_CH_STATUS2_MAINCHGDROP 0x80 +#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40 +#define USB_CH_VBUSDROP 0x40 +#define USB_CH_VBUSDETDBNC 0x01 + /* UsbLineStatus register bit masks */ #define AB8500_USB_LINK_STATUS 0x78 #define AB8500_STD_HOST_SUSP 0x18 @@ -79,6 +86,17 @@ /* Lowest charger voltage is 3.39V -> 0x4E */ #define LOW_VOLT_REG 0x4E +/* Step up/down delay in us */ +#define STEP_UDELAY 1000 + +#define CHARGER_STATUS_POLL 10 /* in ms */ + +#define CHG_WD_INTERVAL (60 * HZ) + +#define AB8500_SW_CONTROL_FALLBACK 0x03 +/* Wait for enumeration before charing in us */ +#define WAIT_ACA_RID_ENUMERATION (5 * 1000) + /* UsbLineStatus register - usb types */ enum ab8500_charger_link_status { USB_STAT_NOT_CONFIGURED, @@ -97,6 +115,13 @@ enum ab8500_charger_link_status { USB_STAT_HM_IDGND, USB_STAT_RESERVED, USB_STAT_NOT_VALID_LINK, + USB_STAT_PHY_EN, + USB_STAT_SUP_NO_IDGND_VBUS, + USB_STAT_SUP_IDGND_VBUS, + USB_STAT_CHARGER_LINE_1, + USB_STAT_CARKIT_1, + USB_STAT_CARKIT_2, + USB_STAT_ACA_DOCK_CHARGER, }; enum ab8500_usb_state { @@ -149,6 +174,7 @@ struct ab8500_charger_info { int charger_voltage; int cv_active; bool wd_expired; + int charger_current; }; struct ab8500_charger_event_flags { @@ -159,12 +185,14 @@ struct ab8500_charger_event_flags { bool usbchargernotok; bool chgwdexp; bool vbus_collapse; + bool vbus_drop_end; }; struct ab8500_charger_usb_state { - bool usb_changed; int usb_current; + int usb_current_tmp; enum ab8500_usb_state state; + enum ab8500_usb_state state_tmp; spinlock_t usb_lock; }; @@ -182,11 +210,17 @@ struct ab8500_charger_usb_state { * charger is enabled * @vbat Battery voltage * @old_vbat Previously measured battery voltage + * @usb_device_is_unrecognised USB device is unrecognised by the hardware * @autopower Indicate if we should have automatic pwron after pwrloss * @autopower_cfg platform specific power config support for "pwron after pwrloss" + * @invalid_charger_detect_state State when forcing AB to use invalid charger + * @is_usb_host: Indicate if last detected USB type is host + * @is_aca_rid: Incicate if accessory is ACA type + * @current_stepping_sessions: + * Counter for current stepping sessions * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc - * @bat: Pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @flags: Structure for information about events triggered * @usb_state: Structure for usb stack information * @ac_chg: AC charger power supply @@ -195,19 +229,28 @@ struct ab8500_charger_usb_state { * @usb: Structure that holds the USB charger properties * @regu: Pointer to the struct regulator * @charger_wq: Work queue for the IRQs and checking HW state + * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals + * @pm_lock: Lock to prevent system to suspend * @check_vbat_work Work for checking vbat threshold to adjust vbus current * @check_hw_failure_work: Work for checking HW state * @check_usbchgnotok_work: Work for checking USB charger not ok status * @kick_wd_work: Work for kicking the charger watchdog in case * of ABB rev 1.* due to the watchog logic bug + * @ac_charger_attached_work: Work for checking if AC charger is still + * connected + * @usb_charger_attached_work: Work for checking if USB charger is still + * connected * @ac_work: Work for checking AC charger connection * @detect_usb_type_work: Work for detecting the USB type connected * @usb_link_status_work: Work for checking the new USB link status * @usb_state_changed_work: Work for checking USB state + * @attach_work: Work for detecting USB type + * @vbus_drop_end_work: Work for detecting VBUS drop end * @check_main_thermal_prot_work: * Work for checking Main thermal status * @check_usb_thermal_prot_work: * Work for checking USB thermal status + * @charger_attached_mutex: For controlling the wakelock */ struct ab8500_charger { struct device *dev; @@ -219,11 +262,16 @@ struct ab8500_charger { bool vddadc_en_usb; int vbat; int old_vbat; + bool usb_device_is_unrecognised; bool autopower; bool autopower_cfg; + int invalid_charger_detect_state; + bool is_usb_host; + int is_aca_rid; + atomic_t current_stepping_sessions; struct ab8500 *parent; struct ab8500_gpadc *gpadc; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct ab8500_charger_event_flags flags; struct ab8500_charger_usb_state usb_state; struct ux500_charger ac_chg; @@ -232,18 +280,24 @@ struct ab8500_charger { struct ab8500_charger_info usb; struct regulator *regu; struct workqueue_struct *charger_wq; + struct mutex usb_ipt_crnt_lock; struct delayed_work check_vbat_work; struct delayed_work check_hw_failure_work; struct delayed_work check_usbchgnotok_work; struct delayed_work kick_wd_work; + struct delayed_work usb_state_changed_work; + struct delayed_work attach_work; + struct delayed_work ac_charger_attached_work; + struct delayed_work usb_charger_attached_work; + struct delayed_work vbus_drop_end_work; struct work_struct ac_work; struct work_struct detect_usb_type_work; struct work_struct usb_link_status_work; - struct work_struct usb_state_changed_work; struct work_struct check_main_thermal_prot_work; struct work_struct check_usb_thermal_prot_work; struct usb_phy *usb_phy; struct notifier_block nb; + struct mutex charger_attached_mutex; }; /* AC properties */ @@ -267,50 +321,65 @@ static enum power_supply_property ab8500_charger_usb_props[] = { POWER_SUPPLY_PROP_CURRENT_NOW, }; -/** - * ab8500_power_loss_handling - set how we handle powerloss. - * @di: pointer to the ab8500_charger structure - * - * Magic nummbers are from STE HW department. +/* + * Function for enabling and disabling sw fallback mode + * should always be disabled when no charger is connected. */ -static void ab8500_power_loss_handling(struct ab8500_charger *di) +static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di, + bool fallback) { + u8 val; u8 reg; + u8 bank; + u8 bit; int ret; - dev_dbg(di->dev, "Autopower : %d\n", di->autopower); + dev_dbg(di->dev, "SW Fallback: %d\n", fallback); - /* read the autopower register */ - ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, ®); - if (ret) { - dev_err(di->dev, "%d write failed\n", __LINE__); - return; + if (is_ab8500(di->parent)) { + bank = 0x15; + reg = 0x0; + bit = 3; + } else { + bank = AB8500_SYS_CTRL1_BLOCK; + reg = AB8500_SW_CONTROL_FALLBACK; + bit = 0; } - /* enable the OPT emulation registers */ - ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); - if (ret) { - dev_err(di->dev, "%d write failed\n", __LINE__); + /* read the register containing fallback bit */ + ret = abx500_get_register_interruptible(di->dev, bank, reg, &val); + if (ret < 0) { + dev_err(di->dev, "%d read failed\n", __LINE__); return; } - if (di->autopower) - reg |= 0x8; + if (is_ab8500(di->parent)) { + /* enable the OPT emulation registers */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + goto disable_otp; + } + } + + if (fallback) + val |= (1 << bit); else - reg &= ~0x8; + val &= ~(1 << bit); - /* write back the changed value to autopower reg */ - ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg); + /* write back the changed fallback bit value to register */ + ret = abx500_set_register_interruptible(di->dev, bank, reg, val); if (ret) { dev_err(di->dev, "%d write failed\n", __LINE__); - return; } - /* disable the set OTP registers again */ - ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); - if (ret) { - dev_err(di->dev, "%d write failed\n", __LINE__); - return; +disable_otp: + if (is_ab8500(di->parent)) { + /* disable the set OTP registers again */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + } } } @@ -329,12 +398,12 @@ static void ab8500_power_supply_changed(struct ab8500_charger *di, !di->ac.charger_connected && di->autopower) { di->autopower = false; - ab8500_power_loss_handling(di); + ab8500_enable_disable_sw_fallback(di, false); } else if (!di->autopower && (di->ac.charger_connected || di->usb.charger_connected)) { di->autopower = true; - ab8500_power_loss_handling(di); + ab8500_enable_disable_sw_fallback(di, true); } } power_supply_changed(psy); @@ -347,6 +416,19 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, dev_dbg(di->dev, "USB connected:%i\n", connected); di->usb.charger_connected = connected; sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); + + if (connected) { + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + queue_delayed_work(di->charger_wq, + &di->usb_charger_attached_work, + HZ); + } else { + cancel_delayed_work_sync(&di->usb_charger_attached_work); + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + } } } @@ -500,6 +582,7 @@ static int ab8500_charger_usb_cv(struct ab8500_charger *di) /** * ab8500_charger_detect_chargers() - Detect the connected chargers * @di: pointer to the ab8500_charger structure + * @probe: if probe, don't delay and wait for HW * * Returns the type of charger connected. * For USB it will not mean we can actually charge from it @@ -513,7 +596,7 @@ static int ab8500_charger_usb_cv(struct ab8500_charger *di) * USB_PW_CONN if the USB power supply is connected * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected */ -static int ab8500_charger_detect_chargers(struct ab8500_charger *di) +static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe) { int result = NO_PW_CONN; int ret; @@ -531,13 +614,25 @@ static int ab8500_charger_detect_chargers(struct ab8500_charger *di) result = AC_PW_CONN; /* Check for USB charger */ + + if (!probe) { + /* + * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100 + * when disconnecting ACA even though no + * charger was connected. Try waiting a little + * longer than the 100 ms of VBUS_DET_DBNC100... + */ + msleep(110); + } ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, AB8500_CH_USBCH_STAT1_REG, &val); if (ret < 0) { dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } - + dev_dbg(di->dev, + "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__, + val); if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) result |= USB_PW_CONN; @@ -554,31 +649,53 @@ static int ab8500_charger_detect_chargers(struct ab8500_charger *di) * Returns error code in case of failure else 0 on success */ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, - enum ab8500_charger_link_status link_status) + enum ab8500_charger_link_status link_status) { int ret = 0; + di->usb_device_is_unrecognised = false; + + /* + * Platform only supports USB 2.0. + * This means that charging current from USB source + * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_* + * should set USB_CH_IP_CUR_LVL_0P5. + */ + switch (link_status) { case USB_STAT_STD_HOST_NC: case USB_STAT_STD_HOST_C_NS: case USB_STAT_STD_HOST_C_S: dev_dbg(di->dev, "USB Type - Standard host is " "detected through USB driver\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = true; + di->is_aca_rid = 0; break; case USB_STAT_HOST_CHG_HS_CHIRP: di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = true; + di->is_aca_rid = 0; break; case USB_STAT_HOST_CHG_HS: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = true; + di->is_aca_rid = 0; + break; case USB_STAT_ACA_RID_C_HS: di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; + di->is_usb_host = false; + di->is_aca_rid = 0; break; case USB_STAT_ACA_RID_A: /* * Dedicated charger level minus maximum current accessory - * can consume (300mA). Closest level is 1100mA + * can consume (900mA). Closest level is 500mA */ - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1; + dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = false; + di->is_aca_rid = 1; break; case USB_STAT_ACA_RID_B: /* @@ -586,34 +703,68 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, * 100mA for potential accessory). Closest level is 1300mA */ di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, + di->max_usb_in_curr); + di->is_usb_host = false; + di->is_aca_rid = 1; break; - case USB_STAT_DEDICATED_CHG: case USB_STAT_HOST_CHG_NM: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->is_usb_host = true; + di->is_aca_rid = 0; + break; + case USB_STAT_DEDICATED_CHG: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + di->is_usb_host = false; + di->is_aca_rid = 0; + break; case USB_STAT_ACA_RID_C_HS_CHIRP: case USB_STAT_ACA_RID_C_NM: di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + di->is_usb_host = false; + di->is_aca_rid = 1; break; - case USB_STAT_RESERVED: - /* - * This state is used to indicate that VBUS has dropped below - * the detection level 4 times in a row. This is due to the - * charger output current is set to high making the charger - * voltage collapse. This have to be propagated through to - * chargalg. This is done using the property - * POWER_SUPPLY_PROP_CURRENT_AVG = 1 - */ - di->flags.vbus_collapse = true; - dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED " - "VBUS has collapsed\n"); - ret = -1; - break; - case USB_STAT_HM_IDGND: case USB_STAT_NOT_CONFIGURED: - case USB_STAT_NOT_VALID_LINK: + if (di->vbus_detected) { + di->usb_device_is_unrecognised = true; + dev_dbg(di->dev, "USB Type - Legacy charger.\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + break; + } + case USB_STAT_HM_IDGND: dev_err(di->dev, "USB Type - Charging not allowed\n"); di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; ret = -ENXIO; break; + case USB_STAT_RESERVED: + if (is_ab8500(di->parent)) { + di->flags.vbus_collapse = true; + dev_err(di->dev, "USB Type - USB_STAT_RESERVED " + "VBUS has collapsed\n"); + ret = -ENXIO; + break; + } + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + dev_dbg(di->dev, "USB Type - Charging not allowed\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", + link_status, di->max_usb_in_curr); + ret = -ENXIO; + break; + } + break; + case USB_STAT_CARKIT_1: + case USB_STAT_CARKIT_2: + case USB_STAT_ACA_DOCK_CHARGER: + case USB_STAT_CHARGER_LINE_1: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, + di->max_usb_in_curr); + case USB_STAT_NOT_VALID_LINK: + dev_err(di->dev, "USB Type invalid - try charging anyway\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + break; + default: dev_err(di->dev, "USB Type - Unknown\n"); di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; @@ -645,8 +796,14 @@ static int ab8500_charger_read_usb_type(struct ab8500_charger *di) dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } - ret = abx500_get_register_interruptible(di->dev, AB8500_USB, - AB8500_USB_LINE_STAT_REG, &val); + if (is_ab8500(di->parent)) { + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + } else { + if (is_ab9540(di->parent) || is_ab8505(di->parent)) + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); + } if (ret < 0) { dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; @@ -682,16 +839,25 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) ret = abx500_get_register_interruptible(di->dev, AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); + dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n", + __func__, val); if (ret < 0) { dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } - ret = abx500_get_register_interruptible(di->dev, AB8500_USB, - AB8500_USB_LINE_STAT_REG, &val); + + if (is_ab8500(di->parent)) + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_STAT_REG, &val); + else + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); if (ret < 0) { dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } + dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__, + val); /* * Until the IT source register is read the UsbLineStatus * register is not updated, hence doing the same @@ -936,6 +1102,144 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) } /** + * ab8500_charger_set_current() - set charger current + * @di: pointer to the ab8500_charger structure + * @ich: charger current, in mA + * @reg: select what charger register to set + * + * Set charger current. + * There is no state machine in the AB to step up/down the charger + * current to avoid dips and spikes on MAIN, VBUS and VBAT when + * charging is started. Instead we need to implement + * this charger current step-up/down here. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_current(struct ab8500_charger *di, + int ich, int reg) +{ + int ret = 0; + int auto_curr_index, curr_index, prev_curr_index, shift_value, i; + u8 reg_value; + u32 step_udelay; + bool no_stepping = false; + + atomic_inc(&di->current_stepping_sessions); + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + reg, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + goto exit_set_current; + } + + switch (reg) { + case AB8500_MCH_IPT_CURLVL_REG: + shift_value = MAIN_CH_INPUT_CURR_SHIFT; + prev_curr_index = (reg_value >> shift_value); + curr_index = ab8500_current_to_regval(ich); + step_udelay = STEP_UDELAY; + if (!di->ac.charger_connected) + no_stepping = true; + break; + case AB8500_USBCH_IPT_CRNTLVL_REG: + shift_value = VBUS_IN_CURR_LIM_SHIFT; + prev_curr_index = (reg_value >> shift_value); + curr_index = ab8500_vbus_in_curr_to_regval(ich); + step_udelay = STEP_UDELAY * 100; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + goto exit_set_current; + } + auto_curr_index = + reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT; + + dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n", + __func__, + ab8500_charger_vbus_in_curr_map[auto_curr_index]); + + prev_curr_index = min(prev_curr_index, auto_curr_index); + + if (!di->usb.charger_connected) + no_stepping = true; + break; + case AB8500_CH_OPT_CRNTLVL_REG: + shift_value = 0; + prev_curr_index = (reg_value >> shift_value); + curr_index = ab8500_current_to_regval(ich); + step_udelay = STEP_UDELAY; + if (curr_index && (curr_index - prev_curr_index) > 1) + step_udelay *= 100; + + if (!di->usb.charger_connected && !di->ac.charger_connected) + no_stepping = true; + + break; + default: + dev_err(di->dev, "%s current register not valid\n", __func__); + ret = -ENXIO; + goto exit_set_current; + } + + if (curr_index < 0) { + dev_err(di->dev, "requested current limit out-of-range\n"); + ret = -ENXIO; + goto exit_set_current; + } + + /* only update current if it's been changed */ + if (prev_curr_index == curr_index) { + dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n", + __func__, reg); + ret = 0; + goto exit_set_current; + } + + dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", + __func__, ich, reg); + + if (no_stepping) { + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + reg, (u8)curr_index << shift_value); + if (ret) + dev_err(di->dev, "%s write failed\n", __func__); + } else if (prev_curr_index > curr_index) { + for (i = prev_curr_index - 1; i >= curr_index; i--) { + dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n", + (u8) i << shift_value, reg); + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8)i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + goto exit_set_current; + } + if (i != curr_index) + usleep_range(step_udelay, step_udelay * 2); + } + } else { + for (i = prev_curr_index + 1; i <= curr_index; i++) { + dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n", + (u8)i << shift_value, reg); + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8)i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + goto exit_set_current; + } + if (i != curr_index) + usleep_range(step_udelay, step_udelay * 2); + } + } + +exit_set_current: + atomic_dec(&di->current_stepping_sessions); + + return ret; +} + +/** * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit * @di: pointer to the ab8500_charger structure * @ich_in: charger input current limit @@ -946,12 +1250,11 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, int ich_in) { - int ret; - int input_curr_index; int min_value; + int ret; /* We should always use to lowest current limit */ - min_value = min(di->bat->chg_params->usb_curr_max, ich_in); + min_value = min(di->bm->chg_params->usb_curr_max, ich_in); switch (min_value) { case 100: @@ -966,22 +1269,47 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, break; } - input_curr_index = ab8500_vbus_in_curr_to_regval(min_value); - if (input_curr_index < 0) { - dev_err(di->dev, "VBUS input current limit too high\n"); - return -ENXIO; - } + dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value); - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_USBCH_IPT_CRNTLVL_REG, - input_curr_index << VBUS_IN_CURR_LIM_SHIFT); - if (ret) - dev_err(di->dev, "%s write failed\n", __func__); + mutex_lock(&di->usb_ipt_crnt_lock); + ret = ab8500_charger_set_current(di, min_value, + AB8500_USBCH_IPT_CRNTLVL_REG); + mutex_unlock(&di->usb_ipt_crnt_lock); return ret; } /** + * ab8500_charger_set_main_in_curr() - set main charger input current + * @di: pointer to the ab8500_charger structure + * @ich_in: input charger current, in mA + * + * Set main charger input current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, + int ich_in) +{ + return ab8500_charger_set_current(di, ich_in, + AB8500_MCH_IPT_CURLVL_REG); +} + +/** + * ab8500_charger_set_output_curr() - set charger output current + * @di: pointer to the ab8500_charger structure + * @ich_out: output charger current, in mA + * + * Set charger output current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_output_curr(struct ab8500_charger *di, + int ich_out) +{ + return ab8500_charger_set_current(di, ich_out, + AB8500_CH_OPT_CRNTLVL_REG); +} + +/** * ab8500_charger_led_en() - turn on/off chargign led * @di: pointer to the ab8500_charger structure * @on: flag to turn on/off the chargign led @@ -1074,7 +1402,7 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, volt_index = ab8500_voltage_to_regval(vset); curr_index = ab8500_current_to_regval(iset); input_curr_index = ab8500_current_to_regval( - di->bat->chg_params->ac_curr_max); + di->bm->chg_params->ac_curr_max); if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { dev_err(di->dev, "Charger voltage or current too high, " @@ -1090,23 +1418,24 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, return ret; } /* MainChInputCurr: current that can be drawn from the charger*/ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_MCH_IPT_CURLVL_REG, - input_curr_index << MAIN_CH_INPUT_CURR_SHIFT); + ret = ab8500_charger_set_main_in_curr(di, + di->bm->chg_params->ac_curr_max); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s Failed to set MainChInputCurr\n", + __func__); return ret; } /* ChOutputCurentLevel: protected output current */ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, iset); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); return ret; } /* Check if VBAT overshoot control should be enabled */ - if (!di->bat->enable_overshoot) + if (!di->bm->enable_overshoot) overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; /* Enable Main Charger */ @@ -1158,12 +1487,11 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, return ret; } - ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1); + ret = ab8500_charger_set_output_curr(di, 0); if (ret) { - dev_err(di->dev, - "%s write failed\n", __func__); + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); return ret; } } else { @@ -1259,24 +1587,13 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, dev_err(di->dev, "%s write failed\n", __func__); return ret; } - /* USBChInputCurr: current that can be drawn from the usb */ - ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); - if (ret) { - dev_err(di->dev, "setting USBChInputCurr failed\n"); - return ret; - } - /* ChOutputCurentLevel: protected output current */ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); - if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); - return ret; - } /* Check if VBAT overshoot control should be enabled */ - if (!di->bat->enable_overshoot) + if (!di->bm->enable_overshoot) overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; /* Enable USB Charger */ + dev_dbg(di->dev, + "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n"); ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); if (ret) { @@ -1289,11 +1606,29 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, if (ret < 0) dev_err(di->dev, "failed to enable LED\n"); + di->usb.charger_online = 1; + + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + + /* ChOutputCurentLevel: protected output current */ + ret = ab8500_charger_set_output_curr(di, ich_out); + if (ret) { + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); + return ret; + } + queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); - di->usb.charger_online = 1; } else { /* Disable USB charging */ + dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0); @@ -1306,7 +1641,21 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, ret = ab8500_charger_led_en(di, false); if (ret < 0) dev_err(di->dev, "failed to disable LED\n"); + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, 0); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = ab8500_charger_set_output_curr(di, 0); + if (ret) { + dev_err(di->dev, "%s " + "Failed to reset ChOutputCurentLevel\n", + __func__); + return ret; + } di->usb.charger_online = 0; di->usb.wd_expired = false; @@ -1366,7 +1715,6 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger, int ich_out) { int ret; - int curr_index; struct ab8500_charger *di; if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) @@ -1376,18 +1724,11 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger, else return -ENXIO; - curr_index = ab8500_current_to_regval(ich_out); - if (curr_index < 0) { - dev_err(di->dev, - "Charger current too high, " - "charging not started\n"); - return -ENXIO; - } - - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, ich_out); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); return ret; } @@ -1597,7 +1938,7 @@ static void ab8500_charger_ac_work(struct work_struct *work) * synchronously, we have the check if the main charger is * connected by reading the status register */ - ret = ab8500_charger_detect_chargers(di); + ret = ab8500_charger_detect_chargers(di, false); if (ret < 0) return; @@ -1612,6 +1953,84 @@ static void ab8500_charger_ac_work(struct work_struct *work) sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); } +static void ab8500_charger_usb_attached_work(struct work_struct *work) +{ + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, + usb_charger_attached_work.work); + int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC); + int ret, i; + u8 statval; + + for (i = 0; i < 10; i++) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, + &statval); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + goto reschedule; + } + if ((statval & usbch) != usbch) + goto reschedule; + + msleep(CHARGER_STATUS_POLL); + } + + ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0); + + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + return; + +reschedule: + queue_delayed_work(di->charger_wq, + &di->usb_charger_attached_work, + HZ); +} + +static void ab8500_charger_ac_attached_work(struct work_struct *work) +{ + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, + ac_charger_attached_work.work); + int mainch = (MAIN_CH_STATUS2_MAINCHGDROP | + MAIN_CH_STATUS2_MAINCHARGERDETDBNC); + int ret, i; + u8 statval; + + for (i = 0; i < 10; i++) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_STATUS2_REG, + &statval); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + goto reschedule; + } + + if ((statval & mainch) != mainch) + goto reschedule; + + msleep(CHARGER_STATUS_POLL); + } + + ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0); + queue_work(di->charger_wq, &di->ac_work); + + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + return; + +reschedule: + queue_delayed_work(di->charger_wq, + &di->ac_charger_attached_work, + HZ); +} + /** * ab8500_charger_detect_usb_type_work() - work to detect USB type * @work: Pointer to the work_struct structure @@ -1630,16 +2049,18 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work) * synchronously, we have the check if is * connected by reading the status register */ - ret = ab8500_charger_detect_chargers(di); + ret = ab8500_charger_detect_chargers(di, false); if (ret < 0) return; if (!(ret & USB_PW_CONN)) { - di->vbus_detected = 0; + dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__); + di->vbus_detected = false; ab8500_charger_set_usb_connected(di, false); ab8500_power_supply_changed(di, &di->usb_chg.psy); } else { - di->vbus_detected = 1; + dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__); + di->vbus_detected = true; if (is_ab8500_1p1_or_earlier(di->parent)) { ret = ab8500_charger_detect_usb_type(di); @@ -1649,7 +2070,8 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work) &di->usb_chg.psy); } } else { - /* For ABB cut2.0 and onwards we have an IRQ, + /* + * For ABB cut2.0 and onwards we have an IRQ, * USB_LINK_STATUS that will be triggered when the USB * link status changes. The exception is USB connected * during startup. Then we don't get a @@ -1670,6 +2092,29 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work) } /** + * ab8500_charger_usb_link_attach_work() - work to detect USB type + * @work: pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_usb_link_attach_work(struct work_struct *work) +{ + struct ab8500_charger *di = + container_of(work, struct ab8500_charger, attach_work.work); + int ret; + + /* Update maximum input current if USB enumeration is not detected */ + if (!di->usb.charger_online) { + ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + if (ret) + return; + } + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, &di->usb_chg.psy); +} + +/** * ab8500_charger_usb_link_status_work() - work to detect USB type * @work: pointer to the work_struct structure * @@ -1677,7 +2122,9 @@ static void ab8500_charger_detect_usb_type_work(struct work_struct *work) */ static void ab8500_charger_usb_link_status_work(struct work_struct *work) { + int detected_chargers; int ret; + u8 val; struct ab8500_charger *di = container_of(work, struct ab8500_charger, usb_link_status_work); @@ -1687,31 +2134,95 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) * synchronously, we have the check if is * connected by reading the status register */ - ret = ab8500_charger_detect_chargers(di); - if (ret < 0) + detected_chargers = ab8500_charger_detect_chargers(di, false); + if (detected_chargers < 0) return; - if (!(ret & USB_PW_CONN)) { - di->vbus_detected = 0; + /* + * Some chargers that breaks the USB spec is + * identified as invalid by AB8500 and it refuse + * to start the charging process. but by jumping + * thru a few hoops it can be forced to start. + */ + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + if (ret >= 0) + dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val); + else + dev_dbg(di->dev, "Error reading USB link status\n"); + + if (detected_chargers & USB_PW_CONN) { + if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK && + di->invalid_charger_detect_state == 0) { + dev_dbg(di->dev, "Invalid charger detected, state= 0\n"); + /*Enable charger*/ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01); + /*Enable charger detection*/ + abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB, + AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01); + di->invalid_charger_detect_state = 1; + /*exit and wait for new link status interrupt.*/ + return; + + } + if (di->invalid_charger_detect_state == 1) { + dev_dbg(di->dev, "Invalid charger detected, state= 1\n"); + /*Stop charger detection*/ + abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB, + AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00); + /*Check link status*/ + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + dev_dbg(di->dev, "USB link status= 0x%02x\n", + (val & AB8500_USB_LINK_STATUS) >> 3); + di->invalid_charger_detect_state = 2; + } + } else { + di->invalid_charger_detect_state = 0; + } + + if (!(detected_chargers & USB_PW_CONN)) { + di->vbus_detected = false; ab8500_charger_set_usb_connected(di, false); ab8500_power_supply_changed(di, &di->usb_chg.psy); - } else { - di->vbus_detected = 1; - ret = ab8500_charger_read_usb_type(di); - if (!ret) { - /* Update maximum input current */ - ret = ab8500_charger_set_vbus_in_curr(di, - di->max_usb_in_curr); - if (ret) - return; + return; + } - ab8500_charger_set_usb_connected(di, true); - ab8500_power_supply_changed(di, &di->usb_chg.psy); - } else if (ret == -ENXIO) { + dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__); + di->vbus_detected = true; + ret = ab8500_charger_read_usb_type(di); + if (ret) { + if (ret == -ENXIO) { /* No valid charger type detected */ ab8500_charger_set_usb_connected(di, false); ab8500_power_supply_changed(di, &di->usb_chg.psy); } + return; + } + + if (di->usb_device_is_unrecognised) { + dev_dbg(di->dev, + "Potential Legacy Charger device. " + "Delay work for %d msec for USB enum " + "to finish", + WAIT_ACA_RID_ENUMERATION); + queue_delayed_work(di->charger_wq, + &di->attach_work, + msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); + } else if (di->is_aca_rid == 1) { + /* Only wait once */ + di->is_aca_rid++; + dev_dbg(di->dev, + "%s Wait %d msec for USB enum to finish", + __func__, WAIT_ACA_RID_ENUMERATION); + queue_delayed_work(di->charger_wq, + &di->attach_work, + msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); + } else { + queue_delayed_work(di->charger_wq, + &di->attach_work, + 0); } } @@ -1721,24 +2232,20 @@ static void ab8500_charger_usb_state_changed_work(struct work_struct *work) unsigned long flags; struct ab8500_charger *di = container_of(work, - struct ab8500_charger, usb_state_changed_work); + struct ab8500_charger, usb_state_changed_work.work); - if (!di->vbus_detected) + if (!di->vbus_detected) { + dev_dbg(di->dev, + "%s !di->vbus_detected\n", + __func__); return; + } spin_lock_irqsave(&di->usb_state.usb_lock, flags); - di->usb_state.usb_changed = false; + di->usb_state.state = di->usb_state.state_tmp; + di->usb_state.usb_current = di->usb_state.usb_current_tmp; spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); - /* - * wait for some time until you get updates from the usb stack - * and negotiations are completed - */ - msleep(250); - - if (di->usb_state.usb_changed) - return; - dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", __func__, di->usb_state.state, di->usb_state.usb_current); @@ -1892,6 +2399,10 @@ static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) dev_dbg(di->dev, "Main charger unplugged\n"); queue_work(di->charger_wq, &di->ac_work); + cancel_delayed_work_sync(&di->ac_charger_attached_work); + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + return IRQ_HANDLED; } @@ -1909,6 +2420,11 @@ static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) dev_dbg(di->dev, "Main charger plugged\n"); queue_work(di->charger_wq, &di->ac_work); + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + queue_delayed_work(di->charger_wq, + &di->ac_charger_attached_work, + HZ); return IRQ_HANDLED; } @@ -1971,6 +2487,21 @@ static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) return IRQ_HANDLED; } +static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) +{ + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, vbus_drop_end_work.work); + + di->flags.vbus_drop_end = false; + + /* Reset the drop counter */ + abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01); + + if (di->usb.charger_connected) + ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); +} + /** * ab8500_charger_vbusdetf_handler() - VBUS falling detected * @irq: interrupt number @@ -1982,6 +2513,7 @@ static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) { struct ab8500_charger *di = _di; + di->vbus_detected = false; dev_dbg(di->dev, "VBUS falling detected\n"); queue_work(di->charger_wq, &di->detect_usb_type_work); @@ -2001,6 +2533,7 @@ static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) di->vbus_detected = true; dev_dbg(di->dev, "VBUS rising detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); return IRQ_HANDLED; @@ -2109,6 +2642,25 @@ static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) } /** + * ab8500_charger_vbuschdropend_handler() - VBUS drop removed + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS charger drop ended\n"); + di->flags.vbus_drop_end = true; + queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, + round_jiffies(30 * HZ)); + + return IRQ_HANDLED; +} + +/** * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected * @irq: interrupt number * @_di: pointer to the ab8500_charger structure @@ -2148,6 +2700,7 @@ static int ab8500_charger_ac_get_property(struct power_supply *psy, union power_supply_propval *val) { struct ab8500_charger *di; + int ret; di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); @@ -2169,7 +2722,10 @@ static int ab8500_charger_ac_get_property(struct power_supply *psy, val->intval = di->ac.charger_connected; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: - di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di); + ret = ab8500_charger_get_ac_voltage(di); + if (ret >= 0) + di->ac.charger_voltage = ret; + /* On error, use previous value */ val->intval = di->ac.charger_voltage * 1000; break; case POWER_SUPPLY_PROP_VOLTAGE_AVG: @@ -2181,7 +2737,10 @@ static int ab8500_charger_ac_get_property(struct power_supply *psy, val->intval = di->ac.cv_active; break; case POWER_SUPPLY_PROP_CURRENT_NOW: - val->intval = ab8500_charger_get_ac_current(di) * 1000; + ret = ab8500_charger_get_ac_current(di); + if (ret >= 0) + di->ac.charger_current = ret; + val->intval = di->ac.charger_current * 1000; break; default: return -EINVAL; @@ -2208,6 +2767,7 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy, union power_supply_propval *val) { struct ab8500_charger *di; + int ret; di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); @@ -2231,7 +2791,9 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy, val->intval = di->usb.charger_connected; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: - di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di); + ret = ab8500_charger_get_vbus_voltage(di); + if (ret >= 0) + di->usb.charger_voltage = ret; val->intval = di->usb.charger_voltage * 1000; break; case POWER_SUPPLY_PROP_VOLTAGE_AVG: @@ -2243,7 +2805,10 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy, val->intval = di->usb.cv_active; break; case POWER_SUPPLY_PROP_CURRENT_NOW: - val->intval = ab8500_charger_get_usb_current(di) * 1000; + ret = ab8500_charger_get_usb_current(di); + if (ret >= 0) + di->usb.charger_current = ret; + val->intval = di->usb.charger_current * 1000; break; case POWER_SUPPLY_PROP_CURRENT_AVG: /* @@ -2293,13 +2858,23 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) } } - /* VBUS OVV set to 6.3V and enable automatic current limitiation */ - ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, - AB8500_USBCH_CTRL2_REG, - VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); + if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent)) + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL2_REG, + VBUS_AUTO_IN_CURR_LIM_ENA, + VBUS_AUTO_IN_CURR_LIM_ENA); + else + /* + * VBUS OVV set to 6.3V and enable automatic current limitation + */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL2_REG, + VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); if (ret) { - dev_err(di->dev, "failed to set VBUS OVV\n"); + dev_err(di->dev, + "failed to set automatic current limitation\n"); goto out; } @@ -2355,12 +2930,26 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) goto out; } + /* Set charger watchdog timeout */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_WD_TIMER_REG, WD_TIMER); + if (ret) { + dev_err(di->dev, "failed to set charger watchdog timeout\n"); + goto out; + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) { + dev_err(di->dev, "failed to disable LED\n"); + goto out; + } + /* Backup battery voltage and current */ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_BACKUP_CHG_REG, - di->bat->bkup_bat_v | - di->bat->bkup_bat_i); + di->bm->bkup_bat_v | + di->bm->bkup_bat_i); if (ret) { dev_err(di->dev, "failed to setup backup battery charging\n"); goto out; @@ -2394,6 +2983,7 @@ static struct ab8500_charger_interrupts ab8500_charger_irq[] = { {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, {"VBUS_OVV", ab8500_charger_vbusovv_handler}, {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, + {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler}, }; static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, @@ -2404,6 +2994,9 @@ static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, enum ab8500_usb_state bm_usb_state; unsigned mA = *((unsigned *)power); + if (!di) + return NOTIFY_DONE; + if (event != USB_EVENT_VBUS) { dev_dbg(di->dev, "not a standard host, returning\n"); return NOTIFY_DONE; @@ -2427,13 +3020,15 @@ static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, __func__, bm_usb_state, mA); spin_lock(&di->usb_state.usb_lock); - di->usb_state.usb_changed = true; + di->usb_state.state_tmp = bm_usb_state; + di->usb_state.usb_current_tmp = mA; spin_unlock(&di->usb_state.usb_lock); - di->usb_state.state = bm_usb_state; - di->usb_state.usb_current = mA; - - queue_work(di->charger_wq, &di->usb_state_changed_work); + /* + * wait for some time until you get updates from the usb stack + * and negotiations are completed + */ + queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2); return NOTIFY_OK; } @@ -2473,6 +3068,9 @@ static int ab8500_charger_resume(struct platform_device *pdev) &di->check_hw_failure_work, 0); } + if (di->flags.vbus_drop_end) + queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0); + return 0; } @@ -2485,6 +3083,23 @@ static int ab8500_charger_suspend(struct platform_device *pdev, if (delayed_work_pending(&di->check_hw_failure_work)) cancel_delayed_work(&di->check_hw_failure_work); + if (delayed_work_pending(&di->vbus_drop_end_work)) + cancel_delayed_work(&di->vbus_drop_end_work); + + flush_delayed_work(&di->attach_work); + flush_delayed_work(&di->usb_charger_attached_work); + flush_delayed_work(&di->ac_charger_attached_work); + flush_delayed_work(&di->check_usbchgnotok_work); + flush_delayed_work(&di->check_vbat_work); + flush_delayed_work(&di->kick_wd_work); + + flush_work(&di->usb_link_status_work); + flush_work(&di->ac_work); + flush_work(&di->detect_usb_type_work); + + if (atomic_read(&di->current_stepping_sessions)) + return -EAGAIN; + return 0; } #else @@ -2509,9 +3124,6 @@ static int ab8500_charger_remove(struct platform_device *pdev) free_irq(irq, di); } - /* disable the regulator */ - regulator_put(di->regu); - /* Backup battery voltage and current disable */ ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); @@ -2525,8 +3137,12 @@ static int ab8500_charger_remove(struct platform_device *pdev) destroy_workqueue(di->charger_wq); flush_scheduled_work(); - power_supply_unregister(&di->usb_chg.psy); - power_supply_unregister(&di->ac_chg.psy); + if(di->usb_chg.enabled) + power_supply_unregister(&di->usb_chg.psy); +#if !defined(CONFIG_CHARGER_PM2301) + if(di->ac_chg.enabled) + power_supply_unregister(&di->ac_chg.psy); +#endif platform_set_drvdata(pdev, NULL); return 0; @@ -2541,32 +3157,31 @@ static char *supply_interface[] = { static int ab8500_charger_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct ab8500_charger *di; - int irq, i, charger_status, ret = 0; + int irq, i, charger_status, ret = 0, ch_stat; di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); if (!di) { dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { - if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_charger\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); + di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); + } else di->autopower_cfg = false; - } /* get parent data */ di->dev = &pdev->dev; @@ -2575,8 +3190,10 @@ static int ab8500_charger_probe(struct platform_device *pdev) /* initialize lock */ spin_lock_init(&di->usb_state.usb_lock); + mutex_init(&di->usb_ipt_crnt_lock); di->autopower = false; + di->invalid_charger_detect_state = 0; /* AC supply */ /* power_supply base class */ @@ -2595,6 +3212,9 @@ static int ab8500_charger_probe(struct platform_device *pdev) ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; di->ac_chg.max_out_curr = ab8500_charger_current_map[ ARRAY_SIZE(ab8500_charger_current_map) - 1]; + di->ac_chg.wdt_refresh = CHG_WD_INTERVAL; + di->ac_chg.enabled = di->bm->ac_enabled; + di->ac_chg.external = false; /* USB supply */ /* power_supply base class */ @@ -2613,7 +3233,9 @@ static int ab8500_charger_probe(struct platform_device *pdev) ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; di->usb_chg.max_out_curr = ab8500_charger_current_map[ ARRAY_SIZE(ab8500_charger_current_map) - 1]; - + di->usb_chg.wdt_refresh = CHG_WD_INTERVAL; + di->usb_chg.enabled = di->bm->usb_enabled; + di->usb_chg.external = false; /* Create a work queue for the charger */ di->charger_wq = @@ -2623,12 +3245,19 @@ static int ab8500_charger_probe(struct platform_device *pdev) return -ENOMEM; } + mutex_init(&di->charger_attached_mutex); + /* Init work for HW failure check */ INIT_DEFERRABLE_WORK(&di->check_hw_failure_work, ab8500_charger_check_hw_failure_work); INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work, ab8500_charger_check_usbchargernotok_work); + INIT_DELAYED_WORK(&di->ac_charger_attached_work, + ab8500_charger_ac_attached_work); + INIT_DELAYED_WORK(&di->usb_charger_attached_work, + ab8500_charger_usb_attached_work); + /* * For ABB revision 1.0 and 1.1 there is a bug in the watchdog * logic. That means we have to continously kick the charger @@ -2644,6 +3273,15 @@ static int ab8500_charger_probe(struct platform_device *pdev) INIT_DEFERRABLE_WORK(&di->check_vbat_work, ab8500_charger_check_vbat_work); + INIT_DELAYED_WORK(&di->attach_work, + ab8500_charger_usb_link_attach_work); + + INIT_DELAYED_WORK(&di->usb_state_changed_work, + ab8500_charger_usb_state_changed_work); + + INIT_DELAYED_WORK(&di->vbus_drop_end_work, + ab8500_charger_vbus_drop_end_work); + /* Init work for charger detection */ INIT_WORK(&di->usb_link_status_work, ab8500_charger_usb_link_status_work); @@ -2651,9 +3289,6 @@ static int ab8500_charger_probe(struct platform_device *pdev) INIT_WORK(&di->detect_usb_type_work, ab8500_charger_detect_usb_type_work); - INIT_WORK(&di->usb_state_changed_work, - ab8500_charger_usb_state_changed_work); - /* Init work for checking HW status */ INIT_WORK(&di->check_main_thermal_prot_work, ab8500_charger_check_main_thermal_prot_work); @@ -2665,7 +3300,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) * is a charger connected to avoid erroneous BTEMP_HIGH/LOW * interrupts during charging */ - di->regu = regulator_get(di->dev, "vddadc"); + di->regu = devm_regulator_get(di->dev, "vddadc"); if (IS_ERR(di->regu)) { ret = PTR_ERR(di->regu); dev_err(di->dev, "failed to get vddadc regulator\n"); @@ -2677,21 +3312,25 @@ static int ab8500_charger_probe(struct platform_device *pdev) ret = ab8500_charger_init_hw_registers(di); if (ret) { dev_err(di->dev, "failed to initialize ABB registers\n"); - goto free_regulator; + goto free_charger_wq; } /* Register AC charger class */ - ret = power_supply_register(di->dev, &di->ac_chg.psy); - if (ret) { - dev_err(di->dev, "failed to register AC charger\n"); - goto free_regulator; + if(di->ac_chg.enabled) { + ret = power_supply_register(di->dev, &di->ac_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register AC charger\n"); + goto free_charger_wq; + } } /* Register USB charger class */ - ret = power_supply_register(di->dev, &di->usb_chg.psy); - if (ret) { - dev_err(di->dev, "failed to register USB charger\n"); - goto free_ac; + if(di->usb_chg.enabled) { + ret = power_supply_register(di->dev, &di->usb_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register USB charger\n"); + goto free_ac; + } } di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); @@ -2708,7 +3347,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) } /* Identify the connected charger types during startup */ - charger_status = ab8500_charger_detect_chargers(di); + charger_status = ab8500_charger_detect_chargers(di, true); if (charger_status & AC_PW_CONN) { di->ac.charger_connected = 1; di->ac_conn = true; @@ -2717,7 +3356,6 @@ static int ab8500_charger_probe(struct platform_device *pdev) } if (charger_status & USB_PW_CONN) { - dev_dbg(di->dev, "VBUS Detect during startup\n"); di->vbus_detected = true; di->vbus_detected_start = true; queue_work(di->charger_wq, @@ -2742,6 +3380,23 @@ static int ab8500_charger_probe(struct platform_device *pdev) platform_set_drvdata(pdev, di); + mutex_lock(&di->charger_attached_mutex); + + ch_stat = ab8500_charger_detect_chargers(di, false); + + if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) { + queue_delayed_work(di->charger_wq, + &di->ac_charger_attached_work, + HZ); + } + if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) { + queue_delayed_work(di->charger_wq, + &di->usb_charger_attached_work, + HZ); + } + + mutex_unlock(&di->charger_attached_mutex); + return ret; free_irq: @@ -2755,11 +3410,11 @@ free_irq: put_usb_phy: usb_put_phy(di->usb_phy); free_usb: - power_supply_unregister(&di->usb_chg.psy); + if(di->usb_chg.enabled) + power_supply_unregister(&di->usb_chg.psy); free_ac: - power_supply_unregister(&di->ac_chg.psy); -free_regulator: - regulator_put(di->regu); + if(di->ac_chg.enabled) + power_supply_unregister(&di->ac_chg.psy); free_charger_wq: destroy_workqueue(di->charger_wq); return ret; diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index b3bf178c3462..25dae4c4b0ef 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -32,6 +32,7 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/mfd/abx500/ab8500-bm.h> #include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/kernel.h> #define MILLI_TO_MICRO 1000 #define FG_LSB_IN_MA 1627 @@ -42,7 +43,7 @@ #define NBR_AVG_SAMPLES 20 -#define LOW_BAT_CHECK_INTERVAL (2 * HZ) +#define LOW_BAT_CHECK_INTERVAL (HZ / 16) /* 62.5 ms */ #define VALID_CAPACITY_SEC (45 * 60) /* 45 minutes */ #define BATT_OK_MIN 2360 /* mV */ @@ -113,6 +114,13 @@ struct ab8500_fg_avg_cap { int sum; }; +struct ab8500_fg_cap_scaling { + bool enable; + int cap_to_scale[2]; + int disable_cap_level; + int scaled_cap; +}; + struct ab8500_fg_battery_capacity { int max_mah_design; int max_mah; @@ -123,6 +131,7 @@ struct ab8500_fg_battery_capacity { int prev_percent; int prev_level; int user_mah; + struct ab8500_fg_cap_scaling cap_scale; }; struct ab8500_fg_flags { @@ -160,6 +169,8 @@ struct inst_curr_result_list { * @recovery_cnt: Counter for recovery mode * @high_curr_cnt: Counter for high current mode * @init_cnt: Counter for init mode + * @low_bat_cnt Counter for number of consecutive low battery measures + * @nbr_cceoc_irq_cnt Counter for number of CCEOC irqs received since enabled * @recovery_needed: Indicate if recovery is needed * @high_curr_mode: Indicate if we're in high current mode * @init_capacity: Indicate if initial capacity measuring should be done @@ -167,13 +178,14 @@ struct inst_curr_result_list { * @calib_state State during offset calibration * @discharge_state: Current discharge state * @charge_state: Current charge state + * @ab8500_fg_started Completion struct used for the instant current start * @ab8500_fg_complete Completion struct used for the instant current reading * @flags: Structure for information about events triggered * @bat_cap: Structure for battery capacity specific parameters * @avg_cap: Average capacity filter * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc - * @bat: Pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @fg_psy: Structure that holds the FG specific battery properties * @fg_wq: Work queue for running the FG algorithm * @fg_periodic_work: Work to run the FG algorithm periodically @@ -199,6 +211,8 @@ struct ab8500_fg { int recovery_cnt; int high_curr_cnt; int init_cnt; + int low_bat_cnt; + int nbr_cceoc_irq_cnt; bool recovery_needed; bool high_curr_mode; bool init_capacity; @@ -206,13 +220,14 @@ struct ab8500_fg { enum ab8500_fg_calibration_state calib_state; enum ab8500_fg_discharge_state discharge_state; enum ab8500_fg_charge_state charge_state; + struct completion ab8500_fg_started; struct completion ab8500_fg_complete; struct ab8500_fg_flags flags; struct ab8500_fg_battery_capacity bat_cap; struct ab8500_fg_avg_cap avg_cap; struct ab8500 *parent; struct ab8500_gpadc *gpadc; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct power_supply fg_psy; struct workqueue_struct *fg_wq; struct delayed_work fg_periodic_work; @@ -355,7 +370,7 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr) /* * We want to know if we're in low current mode */ - if (curr > -di->bat->fg_params->high_curr_threshold) + if (curr > -di->bm->fg_params->high_curr_threshold) return true; else return false; @@ -484,8 +499,9 @@ static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable) di->flags.fg_enabled = true; } else { /* Clear any pending read requests */ - ret = abx500_set_register_interruptible(di->dev, - AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0); + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, + (RESET_ACCU | READ_REQ), 0); if (ret) goto cc_err; @@ -523,13 +539,14 @@ cc_err: * Note: This is part "one" and has to be called before * ab8500_fg_inst_curr_finalize() */ - int ab8500_fg_inst_curr_start(struct ab8500_fg *di) +int ab8500_fg_inst_curr_start(struct ab8500_fg *di) { u8 reg_val; int ret; mutex_lock(&di->cc_lock); + di->nbr_cceoc_irq_cnt = 0; ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_CC_CONF_REG, ®_val); if (ret < 0) @@ -557,6 +574,7 @@ cc_err: } /* Return and WFI */ + INIT_COMPLETION(di->ab8500_fg_started); INIT_COMPLETION(di->ab8500_fg_complete); enable_irq(di->irq); @@ -568,6 +586,17 @@ fail: } /** + * ab8500_fg_inst_curr_started() - check if fg conversion has started + * @di: pointer to the ab8500_fg structure + * + * Returns 1 if conversion started, 0 if still waiting + */ +int ab8500_fg_inst_curr_started(struct ab8500_fg *di) +{ + return completion_done(&di->ab8500_fg_started); +} + +/** * ab8500_fg_inst_curr_done() - check if fg conversion is done * @di: pointer to the ab8500_fg structure * @@ -595,13 +624,15 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) int timeout; if (!completion_done(&di->ab8500_fg_complete)) { - timeout = wait_for_completion_timeout(&di->ab8500_fg_complete, + timeout = wait_for_completion_timeout( + &di->ab8500_fg_complete, INS_CURR_TIMEOUT); dev_dbg(di->dev, "Finalize time: %d ms\n", ((INS_CURR_TIMEOUT - timeout) * 1000) / HZ); if (!timeout) { ret = -ETIME; disable_irq(di->irq); + di->nbr_cceoc_irq_cnt = 0; dev_err(di->dev, "completion timed out [%d]\n", __LINE__); goto fail; @@ -609,6 +640,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) } disable_irq(di->irq); + di->nbr_cceoc_irq_cnt = 0; ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, @@ -647,7 +679,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / - (1000 * di->bat->fg_res); + (1000 * di->bm->fg_res); if (di->turn_off_fg) { dev_dbg(di->dev, "%s Disable FG\n", __func__); @@ -683,6 +715,7 @@ fail: int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di) { int ret; + int timeout; int res = 0; ret = ab8500_fg_inst_curr_start(di); @@ -691,13 +724,33 @@ int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di) return 0; } + /* Wait for CC to actually start */ + if (!completion_done(&di->ab8500_fg_started)) { + timeout = wait_for_completion_timeout( + &di->ab8500_fg_started, + INS_CURR_TIMEOUT); + dev_dbg(di->dev, "Start time: %d ms\n", + ((INS_CURR_TIMEOUT - timeout) * 1000) / HZ); + if (!timeout) { + ret = -ETIME; + dev_err(di->dev, "completion timed out [%d]\n", + __LINE__); + goto fail; + } + } + ret = ab8500_fg_inst_curr_finalize(di, &res); if (ret) { dev_err(di->dev, "Failed to finalize fg_inst\n"); return 0; } + dev_dbg(di->dev, "%s instant current: %d", __func__, res); return res; +fail: + disable_irq(di->irq); + mutex_unlock(&di->cc_lock); + return ret; } /** @@ -750,19 +803,16 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work) * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) / - (100 * di->bat->fg_res); + (100 * di->bm->fg_res); /* * Convert to unit value in mA - * Full scale input voltage is - * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA - * Given a 250ms conversion cycle time the LSB corresponds - * to 112.9 nAh. Convert to current by dividing by the conversion + * by dividing by the conversion * time in hours (= samples / (3600 * 4)h) - * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + * and multiply with 1000 */ di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) / - (1000 * di->bat->fg_res * (di->fg_samples / 4)); + (1000 * di->bm->fg_res * (di->fg_samples / 4)); di->flags.conv_done = true; @@ -770,6 +820,8 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work) queue_work(di->fg_wq, &di->fg_work); + dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n", + di->bm->fg_res, di->fg_samples, val, di->accu_charge); return; exit: dev_err(di->dev, @@ -814,8 +866,8 @@ static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage) struct abx500_v_to_cap *tbl; int cap = 0; - tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl, - tbl_size = di->bat->bat_type[di->bat->batt_id].n_v_cap_tbl_elements; + tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl, + tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements; for (i = 0; i < tbl_size; ++i) { if (voltage > tbl[i].voltage) @@ -866,8 +918,8 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di) struct batres_vs_temp *tbl; int resist = 0; - tbl = di->bat->bat_type[di->bat->batt_id].batres_tbl; - tbl_size = di->bat->bat_type[di->bat->batt_id].n_batres_tbl_elements; + tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl; + tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements; for (i = 0; i < tbl_size; ++i) { if (di->bat_temp / 10 > tbl[i].temp) @@ -888,11 +940,11 @@ static int ab8500_fg_battery_resistance(struct ab8500_fg *di) dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d" " fg resistance %d, total: %d (mOhm)\n", - __func__, di->bat_temp, resist, di->bat->fg_res / 10, - (di->bat->fg_res / 10) + resist); + __func__, di->bat_temp, resist, di->bm->fg_res / 10, + (di->bm->fg_res / 10) + resist); /* fg_res variable is in 0.1mOhm */ - resist += di->bat->fg_res / 10; + resist += di->bm->fg_res / 10; return resist; } @@ -915,7 +967,7 @@ static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di) do { vbat += ab8500_fg_bat_voltage(di); i++; - msleep(5); + usleep_range(5000, 6000); } while (!ab8500_fg_inst_curr_done(di)); ab8500_fg_inst_curr_finalize(di, &di->inst_curr); @@ -1108,16 +1160,16 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di) { int ret, percent; - percent = di->bat_cap.permille / 10; + percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10); - if (percent <= di->bat->cap_levels->critical || + if (percent <= di->bm->cap_levels->critical || di->flags.low_bat) ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; - else if (percent <= di->bat->cap_levels->low) + else if (percent <= di->bm->cap_levels->low) ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW; - else if (percent <= di->bat->cap_levels->normal) + else if (percent <= di->bm->cap_levels->normal) ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; - else if (percent <= di->bat->cap_levels->high) + else if (percent <= di->bm->cap_levels->high) ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH; else ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL; @@ -1126,6 +1178,99 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di) } /** + * ab8500_fg_calculate_scaled_capacity() - Capacity scaling + * @di: pointer to the ab8500_fg structure + * + * Calculates the capacity to be shown to upper layers. Scales the capacity + * to have 100% as a reference from the actual capacity upon removal of charger + * when charging is in maintenance mode. + */ +static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di) +{ + struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale; + int capacity = di->bat_cap.prev_percent; + + if (!cs->enable) + return capacity; + + /* + * As long as we are in fully charge mode scale the capacity + * to show 100%. + */ + if (di->flags.fully_charged) { + cs->cap_to_scale[0] = 100; + cs->cap_to_scale[1] = + max(capacity, di->bm->fg_params->maint_thres); + dev_dbg(di->dev, "Scale cap with %d/%d\n", + cs->cap_to_scale[0], cs->cap_to_scale[1]); + } + + /* Calculates the scaled capacity. */ + if ((cs->cap_to_scale[0] != cs->cap_to_scale[1]) + && (cs->cap_to_scale[1] > 0)) + capacity = min(100, + DIV_ROUND_CLOSEST(di->bat_cap.prev_percent * + cs->cap_to_scale[0], + cs->cap_to_scale[1])); + + if (di->flags.charging) { + if (capacity < cs->disable_cap_level) { + cs->disable_cap_level = capacity; + dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n", + cs->disable_cap_level); + } else if (!di->flags.fully_charged) { + if (di->bat_cap.prev_percent >= + cs->disable_cap_level) { + dev_dbg(di->dev, "Disabling scaled capacity\n"); + cs->enable = false; + capacity = di->bat_cap.prev_percent; + } else { + dev_dbg(di->dev, + "Waiting in cap to level %d%%\n", + cs->disable_cap_level); + capacity = cs->disable_cap_level; + } + } + } + + return capacity; +} + +/** + * ab8500_fg_update_cap_scalers() - Capacity scaling + * @di: pointer to the ab8500_fg structure + * + * To be called when state change from charge<->discharge to update + * the capacity scalers. + */ +static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di) +{ + struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale; + + if (!cs->enable) + return; + if (di->flags.charging) { + di->bat_cap.cap_scale.disable_cap_level = + di->bat_cap.cap_scale.scaled_cap; + dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n", + di->bat_cap.cap_scale.disable_cap_level); + } else { + if (cs->scaled_cap != 100) { + cs->cap_to_scale[0] = cs->scaled_cap; + cs->cap_to_scale[1] = di->bat_cap.prev_percent; + } else { + cs->cap_to_scale[0] = 100; + cs->cap_to_scale[1] = + max(di->bat_cap.prev_percent, + di->bm->fg_params->maint_thres); + } + + dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n", + cs->cap_to_scale[0], cs->cap_to_scale[1]); + } +} + +/** * ab8500_fg_check_capacity_limits() - Check if capacity has changed * @di: pointer to the ab8500_fg structure * @init: capacity is allowed to go up in init mode @@ -1136,6 +1281,7 @@ static int ab8500_fg_capacity_level(struct ab8500_fg *di) static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) { bool changed = false; + int percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10); di->bat_cap.level = ab8500_fg_capacity_level(di); @@ -1167,33 +1313,41 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) dev_dbg(di->dev, "Battery low, set capacity to 0\n"); di->bat_cap.prev_percent = 0; di->bat_cap.permille = 0; + percent = 0; di->bat_cap.prev_mah = 0; di->bat_cap.mah = 0; changed = true; } else if (di->flags.fully_charged) { /* * We report 100% if algorithm reported fully charged - * unless capacity drops too much + * and show 100% during maintenance charging (scaling). */ if (di->flags.force_full) { - di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_percent = percent; di->bat_cap.prev_mah = di->bat_cap.mah; - } else if (!di->flags.force_full && - di->bat_cap.prev_percent != - (di->bat_cap.permille) / 10 && - (di->bat_cap.permille / 10) < - di->bat->fg_params->maint_thres) { + + changed = true; + + if (!di->bat_cap.cap_scale.enable && + di->bm->capacity_scaling) { + di->bat_cap.cap_scale.enable = true; + di->bat_cap.cap_scale.cap_to_scale[0] = 100; + di->bat_cap.cap_scale.cap_to_scale[1] = + di->bat_cap.prev_percent; + di->bat_cap.cap_scale.disable_cap_level = 100; + } + } else if (di->bat_cap.prev_percent != percent) { dev_dbg(di->dev, "battery reported full " "but capacity dropping: %d\n", - di->bat_cap.permille / 10); - di->bat_cap.prev_percent = di->bat_cap.permille / 10; + percent); + di->bat_cap.prev_percent = percent; di->bat_cap.prev_mah = di->bat_cap.mah; changed = true; } - } else if (di->bat_cap.prev_percent != di->bat_cap.permille / 10) { - if (di->bat_cap.permille / 10 == 0) { + } else if (di->bat_cap.prev_percent != percent) { + if (percent == 0) { /* * We will not report 0% unless we've got * the LOW_BAT IRQ, no matter what the FG @@ -1203,11 +1357,11 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) di->bat_cap.permille = 1; di->bat_cap.prev_mah = 1; di->bat_cap.mah = 1; + percent = 1; changed = true; } else if (!(!di->flags.charging && - (di->bat_cap.permille / 10) > - di->bat_cap.prev_percent) || init) { + percent > di->bat_cap.prev_percent) || init) { /* * We do not allow reported capacity to go up * unless we're charging or if we're in init @@ -1215,9 +1369,9 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) dev_dbg(di->dev, "capacity changed from %d to %d (%d)\n", di->bat_cap.prev_percent, - di->bat_cap.permille / 10, + percent, di->bat_cap.permille); - di->bat_cap.prev_percent = di->bat_cap.permille / 10; + di->bat_cap.prev_percent = percent; di->bat_cap.prev_mah = di->bat_cap.mah; changed = true; @@ -1225,12 +1379,20 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) dev_dbg(di->dev, "capacity not allowed to go up since " "no charger is connected: %d to %d (%d)\n", di->bat_cap.prev_percent, - di->bat_cap.permille / 10, + percent, di->bat_cap.permille); } } if (changed) { + if (di->bm->capacity_scaling) { + di->bat_cap.cap_scale.scaled_cap = + ab8500_fg_calculate_scaled_capacity(di); + + dev_info(di->dev, "capacity=%d (%d)\n", + di->bat_cap.prev_percent, + di->bat_cap.cap_scale.scaled_cap); + } power_supply_changed(&di->fg_psy); if (di->flags.fully_charged && di->flags.force_full) { dev_dbg(di->dev, "Battery full, notifying.\n"); @@ -1284,7 +1446,7 @@ static void ab8500_fg_algorithm_charging(struct ab8500_fg *di) switch (di->charge_state) { case AB8500_FG_CHARGE_INIT: di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_charging); + di->bm->fg_params->accu_charging); ab8500_fg_coulomb_counter(di, true); ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT); @@ -1296,7 +1458,7 @@ static void ab8500_fg_algorithm_charging(struct ab8500_fg *di) * Read the FG and calculate the new capacity */ mutex_lock(&di->cc_lock); - if (!di->flags.conv_done) { + if (!di->flags.conv_done && !di->flags.force_full) { /* Wasn't the CC IRQ that got us here */ mutex_unlock(&di->cc_lock); dev_dbg(di->dev, "%s CC conv not done\n", @@ -1346,8 +1508,8 @@ static bool check_sysfs_capacity(struct ab8500_fg *di) cap_permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.user_mah); - lower = di->bat_cap.permille - di->bat->fg_params->user_cap_limit * 10; - upper = di->bat_cap.permille + di->bat->fg_params->user_cap_limit * 10; + lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10; + upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10; if (lower < 0) lower = 0; @@ -1387,7 +1549,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) case AB8500_FG_DISCHARGE_INIT: /* We use the FG IRQ to work on */ di->init_cnt = 0; - di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INITMEASURING); @@ -1400,18 +1562,17 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) * samples to get an initial capacity. * Then go to READOUT */ - sleep_time = di->bat->fg_params->init_timer; + sleep_time = di->bm->fg_params->init_timer; /* Discard the first [x] seconds */ - if (di->init_cnt > - di->bat->fg_params->init_discard_time) { + if (di->init_cnt > di->bm->fg_params->init_discard_time) { ab8500_fg_calc_cap_discharge_voltage(di, true); ab8500_fg_check_capacity_limits(di, true); } di->init_cnt += sleep_time; - if (di->init_cnt > di->bat->fg_params->init_total_time) + if (di->init_cnt > di->bm->fg_params->init_total_time) ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT_INIT); @@ -1426,7 +1587,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) /* Intentional fallthrough */ case AB8500_FG_DISCHARGE_RECOVERY: - sleep_time = di->bat->fg_params->recovery_sleep_timer; + sleep_time = di->bm->fg_params->recovery_sleep_timer; /* * We should check the power consumption @@ -1438,9 +1599,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) if (ab8500_fg_is_low_curr(di, di->inst_curr)) { if (di->recovery_cnt > - di->bat->fg_params->recovery_total_time) { + di->bm->fg_params->recovery_total_time) { di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1453,7 +1614,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) di->recovery_cnt += sleep_time; } else { di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1462,7 +1623,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) case AB8500_FG_DISCHARGE_READOUT_INIT: di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1480,7 +1641,7 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) if (di->recovery_needed) { ab8500_fg_discharge_state_to(di, - AB8500_FG_DISCHARGE_RECOVERY); + AB8500_FG_DISCHARGE_INIT_RECOVERY); queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); @@ -1509,9 +1670,9 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) } di->high_curr_cnt += - di->bat->fg_params->accu_high_curr; + di->bm->fg_params->accu_high_curr; if (di->high_curr_cnt > - di->bat->fg_params->high_curr_time) + di->bm->fg_params->high_curr_time) di->recovery_needed = true; ab8500_fg_calc_cap_discharge_fg(di); @@ -1523,12 +1684,10 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) case AB8500_FG_DISCHARGE_WAKEUP: ab8500_fg_coulomb_counter(di, true); - di->inst_curr = ab8500_fg_inst_curr_blocking(di); - ab8500_fg_calc_cap_discharge_voltage(di, true); di->fg_samples = SEC_TO_SAMPLE( - di->bat->fg_params->accu_high_curr); + di->bm->fg_params->accu_high_curr); ab8500_fg_coulomb_counter(di, true); ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_READOUT); @@ -1641,8 +1800,6 @@ static void ab8500_fg_periodic_work(struct work_struct *work) fg_periodic_work.work); if (di->init_capacity) { - /* A dummy read that will return 0 */ - di->inst_curr = ab8500_fg_inst_curr_blocking(di); /* Get an initial capacity calculation */ ab8500_fg_calc_cap_discharge_voltage(di, true); ab8500_fg_check_capacity_limits(di, true); @@ -1684,24 +1841,26 @@ static void ab8500_fg_check_hw_failure_work(struct work_struct *work) * If we have had a battery over-voltage situation, * check ovv-bit to see if it should be reset. */ - if (di->flags.bat_ovv) { - ret = abx500_get_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_CH_STAT_REG, - ®_value); - if (ret < 0) { - dev_err(di->dev, "%s ab8500 read failed\n", __func__); - return; - } - if ((reg_value & BATT_OVV) != BATT_OVV) { - dev_dbg(di->dev, "Battery recovered from OVV\n"); - di->flags.bat_ovv = false; + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STAT_REG, + ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if ((reg_value & BATT_OVV) == BATT_OVV) { + if (!di->flags.bat_ovv) { + dev_dbg(di->dev, "Battery OVV\n"); + di->flags.bat_ovv = true; power_supply_changed(&di->fg_psy); - return; } - /* Not yet recovered from ovv, reschedule this test */ queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, - round_jiffies(HZ)); + HZ); + } else { + dev_dbg(di->dev, "Battery recovered from OVV\n"); + di->flags.bat_ovv = false; + power_supply_changed(&di->fg_psy); } } @@ -1721,26 +1880,30 @@ static void ab8500_fg_low_bat_work(struct work_struct *work) vbat = ab8500_fg_bat_voltage(di); /* Check if LOW_BAT still fulfilled */ - if (vbat < di->bat->fg_params->lowbat_threshold) { - di->flags.low_bat = true; - dev_warn(di->dev, "Battery voltage still LOW\n"); - - /* - * We need to re-schedule this check to be able to detect - * if the voltage increases again during charging - */ - queue_delayed_work(di->fg_wq, &di->fg_low_bat_work, - round_jiffies(LOW_BAT_CHECK_INTERVAL)); + if (vbat < di->bm->fg_params->lowbat_threshold) { + /* Is it time to shut down? */ + if (di->low_bat_cnt < 1) { + di->flags.low_bat = true; + dev_warn(di->dev, "Shut down pending...\n"); + } else { + /* + * Else we need to re-schedule this check to be able to detect + * if the voltage increases again during charging or + * due to decreasing load. + */ + di->low_bat_cnt--; + dev_warn(di->dev, "Battery voltage still LOW\n"); + queue_delayed_work(di->fg_wq, &di->fg_low_bat_work, + round_jiffies(LOW_BAT_CHECK_INTERVAL)); + } } else { - di->flags.low_bat = false; + di->flags.low_bat_delay = false; + di->low_bat_cnt = 10; dev_warn(di->dev, "Battery voltage OK again\n"); } /* This is needed to dispatch LOW_BAT */ ab8500_fg_check_capacity_limits(di, false); - - /* Set this flag to check if LOW_BAT IRQ still occurs */ - di->flags.low_bat_delay = false; } /** @@ -1779,8 +1942,8 @@ static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di) int ret; int new_val; - sel0 = di->bat->fg_params->battok_falling_th_sel0; - sel1 = di->bat->fg_params->battok_raising_th_sel1; + sel0 = di->bm->fg_params->battok_falling_th_sel0; + sel1 = di->bm->fg_params->battok_raising_th_sel1; cbp_sel0 = ab8500_fg_battok_calc(di, sel0); cbp_sel1 = ab8500_fg_battok_calc(di, sel1); @@ -1828,7 +1991,13 @@ static void ab8500_fg_instant_work(struct work_struct *work) static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di) { struct ab8500_fg *di = _di; - complete(&di->ab8500_fg_complete); + if (!di->nbr_cceoc_irq_cnt) { + di->nbr_cceoc_irq_cnt++; + complete(&di->ab8500_fg_started); + } else { + di->nbr_cceoc_irq_cnt = 0; + complete(&di->ab8500_fg_complete); + } return IRQ_HANDLED; } @@ -1875,8 +2044,6 @@ static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di) struct ab8500_fg *di = _di; dev_dbg(di->dev, "Battery OVV\n"); - di->flags.bat_ovv = true; - power_supply_changed(&di->fg_psy); /* Schedule a new HW failure check */ queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0); @@ -1895,6 +2062,7 @@ static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di) { struct ab8500_fg *di = _di; + /* Initiate handling in ab8500_fg_low_bat_work() if not already initiated. */ if (!di->flags.low_bat_delay) { dev_warn(di->dev, "Battery voltage is below LOW threshold\n"); di->flags.low_bat_delay = true; @@ -1963,7 +2131,7 @@ static int ab8500_fg_get_property(struct power_supply *psy, di->bat_cap.max_mah); break; case POWER_SUPPLY_PROP_ENERGY_NOW: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = ab8500_fg_convert_mah_to_uwh(di, di->bat_cap.max_mah); @@ -1978,21 +2146,23 @@ static int ab8500_fg_get_property(struct power_supply *psy, val->intval = di->bat_cap.max_mah; break; case POWER_SUPPLY_PROP_CHARGE_NOW: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = di->bat_cap.max_mah; else val->intval = di->bat_cap.prev_mah; break; case POWER_SUPPLY_PROP_CAPACITY: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->bm->capacity_scaling) + val->intval = di->bat_cap.cap_scale.scaled_cap; + else if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = 100; else val->intval = di->bat_cap.prev_percent; break; case POWER_SUPPLY_PROP_CAPACITY_LEVEL: - if (di->flags.batt_unknown && !di->bat->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; else @@ -2049,6 +2219,8 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) break; di->flags.charging = false; di->flags.fully_charged = false; + if (di->bm->capacity_scaling) + ab8500_fg_update_cap_scalers(di); queue_work(di->fg_wq, &di->fg_work); break; case POWER_SUPPLY_STATUS_FULL: @@ -2061,10 +2233,13 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) queue_work(di->fg_wq, &di->fg_work); break; case POWER_SUPPLY_STATUS_CHARGING: - if (di->flags.charging) + if (di->flags.charging && + !di->flags.fully_charged) break; di->flags.charging = true; di->flags.fully_charged = false; + if (di->bm->capacity_scaling) + ab8500_fg_update_cap_scalers(di); queue_work(di->fg_wq, &di->fg_work); break; }; @@ -2075,10 +2250,11 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) case POWER_SUPPLY_PROP_TECHNOLOGY: switch (ext->type) { case POWER_SUPPLY_TYPE_BATTERY: - if (!di->flags.batt_id_received) { + if (!di->flags.batt_id_received && + di->bm->batt_id != BATTERY_UNKNOWN) { const struct abx500_battery_type *b; - b = &(di->bat->bat_type[di->bat->batt_id]); + b = &(di->bm->bat_type[di->bm->batt_id]); di->flags.batt_id_received = true; @@ -2104,8 +2280,8 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) case POWER_SUPPLY_PROP_TEMP: switch (ext->type) { case POWER_SUPPLY_TYPE_BATTERY: - if (di->flags.batt_id_received) - di->bat_temp = ret.intval; + if (di->flags.batt_id_received) + di->bat_temp = ret.intval; break; default: break; @@ -2155,7 +2331,7 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) AB8500_SYS_CTRL2_BLOCK, AB8500_LOW_BAT_REG, ab8500_volt_to_regval( - di->bat->fg_params->lowbat_threshold) << 1 | + di->bm->fg_params->lowbat_threshold) << 1 | LOW_BAT_ENABLE); if (ret) { dev_err(di->dev, "%s write failed\n", __func__); @@ -2395,6 +2571,11 @@ static int ab8500_fg_suspend(struct platform_device *pdev, struct ab8500_fg *di = platform_get_drvdata(pdev); flush_delayed_work(&di->fg_periodic_work); + flush_work(&di->fg_work); + flush_work(&di->fg_acc_cur_work); + flush_delayed_work(&di->fg_reinit_work); + flush_delayed_work(&di->fg_low_bat_work); + flush_delayed_work(&di->fg_check_hw_failure_work); /* * If the FG is enabled we will disable it before going to suspend @@ -2448,6 +2629,7 @@ static char *supply_interface[] = { static int ab8500_fg_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct ab8500_fg *di; int i, irq; int ret = 0; @@ -2457,21 +2639,19 @@ static int ab8500_fg_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { - if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_fg\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); } mutex_init(&di->cc_lock); @@ -2491,11 +2671,11 @@ static int ab8500_fg_probe(struct platform_device *pdev) di->fg_psy.external_power_changed = ab8500_fg_external_power_changed; di->bat_cap.max_mah_design = MILLI_TO_MICRO * - di->bat->bat_type[di->bat->batt_id].charge_full_design; + di->bm->bat_type[di->bm->batt_id].charge_full_design; di->bat_cap.max_mah = di->bat_cap.max_mah_design; - di->vbat_nom = di->bat->bat_type[di->bat->batt_id].nominal_voltage; + di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage; di->init_capacity = true; @@ -2531,6 +2711,12 @@ static int ab8500_fg_probe(struct platform_device *pdev) INIT_DEFERRABLE_WORK(&di->fg_check_hw_failure_work, ab8500_fg_check_hw_failure_work); + /* Reset battery low voltage flag */ + di->flags.low_bat = false; + + /* Initialize low battery counter */ + di->low_bat_cnt = 10; + /* Initialize OVV, and other registers */ ret = ab8500_fg_init_hw_registers(di); if (ret) { @@ -2549,10 +2735,14 @@ static int ab8500_fg_probe(struct platform_device *pdev) goto free_inst_curr_wq; } - di->fg_samples = SEC_TO_SAMPLE(di->bat->fg_params->init_timer); + di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer); ab8500_fg_coulomb_counter(di, true); - /* Initialize completion used to notify completion of inst current */ + /* + * Initialize completion used to notify completion and start + * of inst current + */ + init_completion(&di->ab8500_fg_started); init_completion(&di->ab8500_fg_complete); /* Register interrupts */ @@ -2572,6 +2762,7 @@ static int ab8500_fg_probe(struct platform_device *pdev) } di->irq = platform_get_irq_byname(pdev, "CCEOC"); disable_irq(di->irq); + di->nbr_cceoc_irq_cnt = 0; platform_set_drvdata(pdev, di); diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c index 297089146064..f043c0851a76 100644 --- a/drivers/power/abx500_chargalg.c +++ b/drivers/power/abx500_chargalg.c @@ -33,9 +33,6 @@ /* End-of-charge criteria counter */ #define EOC_COND_CNT 10 -/* Recharge criteria counter */ -#define RCH_COND_CNT 3 - #define to_abx500_chargalg_device_info(x) container_of((x), \ struct abx500_chargalg, chargalg_psy); @@ -196,7 +193,6 @@ enum maxim_ret { * @dev: pointer to the structure device * @charge_status: battery operating status * @eoc_cnt: counter used to determine end-of_charge - * @rch_cnt: counter used to determine start of recharge * @maintenance_chg: indicate if maintenance charge is active * @t_hyst_norm temperature hysteresis when the temperature has been * over or under normal limits @@ -207,7 +203,7 @@ enum maxim_ret { * @chg_info: information about connected charger types * @batt_data: data of the battery * @susp_status: current charger suspension status - * @bat: pointer to the abx500_bm platform data + * @bm: Platform specific battery management information * @chargalg_psy: structure that holds the battery properties exposed by * the charging algorithm * @events: structure for information about events triggered @@ -223,7 +219,6 @@ struct abx500_chargalg { struct device *dev; int charge_status; int eoc_cnt; - int rch_cnt; bool maintenance_chg; int t_hyst_norm; int t_hyst_lowhigh; @@ -232,7 +227,7 @@ struct abx500_chargalg { struct abx500_chargalg_charger_info chg_info; struct abx500_chargalg_battery_data batt_data; struct abx500_chargalg_suspension_status susp_status; - struct abx500_bm_data *bat; + struct abx500_bm_data *bm; struct power_supply chargalg_psy; struct ux500_charger *ac_chg; struct ux500_charger *usb_chg; @@ -367,13 +362,13 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) case AC_CHG: timer_expiration = round_jiffies(jiffies + - (di->bat->main_safety_tmr_h * 3600 * HZ)); + (di->bm->main_safety_tmr_h * 3600 * HZ)); break; case USB_CHG: timer_expiration = round_jiffies(jiffies + - (di->bat->usb_safety_tmr_h * 3600 * HZ)); + (di->bm->usb_safety_tmr_h * 3600 * HZ)); break; default: @@ -450,8 +445,18 @@ static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di) { /* Check if charger exists and kick watchdog if charging */ if (di->ac_chg && di->ac_chg->ops.kick_wd && - di->chg_info.online_chg & AC_CHG) + di->chg_info.online_chg & AC_CHG) { + /* + * If AB charger watchdog expired, pm2xxx charging + * gets disabled. To be safe, kick both AB charger watchdog + * and pm2xxx watchdog. + */ + if (di->ac_chg->external && + di->usb_chg && di->usb_chg->ops.kick_wd) + di->usb_chg->ops.kick_wd(di->usb_chg); + return di->ac_chg->ops.kick_wd(di->ac_chg); + } else if (di->usb_chg && di->usb_chg->ops.kick_wd && di->chg_info.online_chg & USB_CHG) return di->usb_chg->ops.kick_wd(di->usb_chg); @@ -608,6 +613,8 @@ static void abx500_chargalg_hold_charging(struct abx500_chargalg *di) static void abx500_chargalg_start_charging(struct abx500_chargalg *di, int vset, int iset) { + bool start_chargalg_wd = true; + switch (di->chg_info.charger_type) { case AC_CHG: dev_dbg(di->dev, @@ -625,8 +632,12 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di, default: dev_err(di->dev, "Unknown charger to charge from\n"); + start_chargalg_wd = false; break; } + + if (start_chargalg_wd && !delayed_work_pending(&di->chargalg_wd_work)) + queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0); } /** @@ -638,32 +649,32 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di, */ static void abx500_chargalg_check_temp(struct abx500_chargalg *di) { - if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) && - di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) { + if (di->batt_data.temp > (di->bm->temp_low + di->t_hyst_norm) && + di->batt_data.temp < (di->bm->temp_high - di->t_hyst_norm)) { /* Temp OK! */ di->events.btemp_underover = false; di->events.btemp_lowhigh = false; di->t_hyst_norm = 0; di->t_hyst_lowhigh = 0; } else { - if (((di->batt_data.temp >= di->bat->temp_high) && + if (((di->batt_data.temp >= di->bm->temp_high) && (di->batt_data.temp < - (di->bat->temp_over - di->t_hyst_lowhigh))) || + (di->bm->temp_over - di->t_hyst_lowhigh))) || ((di->batt_data.temp > - (di->bat->temp_under + di->t_hyst_lowhigh)) && - (di->batt_data.temp <= di->bat->temp_low))) { + (di->bm->temp_under + di->t_hyst_lowhigh)) && + (di->batt_data.temp <= di->bm->temp_low))) { /* TEMP minor!!!!! */ di->events.btemp_underover = false; di->events.btemp_lowhigh = true; - di->t_hyst_norm = di->bat->temp_hysteresis; + di->t_hyst_norm = di->bm->temp_hysteresis; di->t_hyst_lowhigh = 0; - } else if (di->batt_data.temp <= di->bat->temp_under || - di->batt_data.temp >= di->bat->temp_over) { + } else if (di->batt_data.temp <= di->bm->temp_under || + di->batt_data.temp >= di->bm->temp_over) { /* TEMP major!!!!! */ di->events.btemp_underover = true; di->events.btemp_lowhigh = false; di->t_hyst_norm = 0; - di->t_hyst_lowhigh = di->bat->temp_hysteresis; + di->t_hyst_lowhigh = di->bm->temp_hysteresis; } else { /* Within hysteresis */ dev_dbg(di->dev, "Within hysteresis limit temp: %d " @@ -682,12 +693,12 @@ static void abx500_chargalg_check_temp(struct abx500_chargalg *di) */ static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di) { - if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max) + if (di->chg_info.usb_volt > di->bm->chg_params->usb_volt_max) di->chg_info.usb_chg_ok = false; else di->chg_info.usb_chg_ok = true; - if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max) + if (di->chg_info.ac_volt > di->bm->chg_params->ac_volt_max) di->chg_info.ac_chg_ok = false; else di->chg_info.ac_chg_ok = true; @@ -707,10 +718,10 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && di->charge_state == STATE_NORMAL && !di->maintenance_chg && (di->batt_data.volt >= - di->bat->bat_type[di->bat->batt_id].termination_vol || + di->bm->bat_type[di->bm->batt_id].termination_vol || di->events.usb_cv_active || di->events.ac_cv_active) && di->batt_data.avg_curr < - di->bat->bat_type[di->bat->batt_id].termination_curr && + di->bm->bat_type[di->bm->batt_id].termination_curr && di->batt_data.avg_curr > 0) { if (++di->eoc_cnt >= EOC_COND_CNT) { di->eoc_cnt = 0; @@ -733,12 +744,12 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) static void init_maxim_chg_curr(struct abx500_chargalg *di) { di->ccm.original_iset = - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl; di->ccm.current_iset = - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; - di->ccm.test_delta_i = di->bat->maxi->charger_curr_step; - di->ccm.max_current = di->bat->maxi->chg_curr; - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl; + di->ccm.test_delta_i = di->bm->maxi->charger_curr_step; + di->ccm.max_current = di->bm->maxi->chg_curr; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.level = 0; } @@ -755,7 +766,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) { int delta_i; - if (!di->bat->maxi->ena_maxi) + if (!di->bm->maxi->ena_maxi) return MAXIM_RET_NOACTION; delta_i = di->ccm.original_iset - di->batt_data.inst_curr; @@ -766,7 +777,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) if (di->ccm.wait_cnt == 0) { dev_dbg(di->dev, "lowering current\n"); di->ccm.wait_cnt++; - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.max_current = di->ccm.current_iset - di->ccm.test_delta_i; di->ccm.current_iset = di->ccm.max_current; @@ -791,7 +802,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) if (di->ccm.current_iset == di->ccm.original_iset) return MAXIM_RET_NOACTION; - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.current_iset = di->ccm.original_iset; di->ccm.level = 0; @@ -803,7 +814,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) di->ccm.max_current) { if (di->ccm.condition_cnt-- == 0) { /* Increse the iset with cco.test_delta_i */ - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; di->ccm.current_iset += di->ccm.test_delta_i; di->ccm.level++; dev_dbg(di->dev, " Maximization needed, increase" @@ -818,7 +829,7 @@ static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) return MAXIM_RET_NOACTION; } } else { - di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.condition_cnt = di->bm->maxi->wait_cycles; return MAXIM_RET_NOACTION; } } @@ -838,7 +849,7 @@ static void handle_maxim_chg_curr(struct abx500_chargalg *di) break; case MAXIM_RET_IBAT_TOO_HIGH: result = abx500_chargalg_update_chg_curr(di, - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); if (result) dev_err(di->dev, "failed to set chg curr\n"); break; @@ -858,6 +869,7 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) union power_supply_propval ret; int i, j; bool psy_found = false; + bool capacity_updated = false; psy = (struct power_supply *)data; ext = dev_get_drvdata(dev); @@ -870,6 +882,16 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) if (!psy_found) return 0; + /* + * If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its + * property because of handling that sysfs entry on its own, this is + * the place to get the battery capacity. + */ + if (!ext->get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) { + di->batt_data.percent = ret.intval; + capacity_updated = true; + } + /* Go through all properties for the psy */ for (j = 0; j < ext->num_properties; j++) { enum power_supply_property prop; @@ -1154,7 +1176,8 @@ static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) } break; case POWER_SUPPLY_PROP_CAPACITY: - di->batt_data.percent = ret.intval; + if (!capacity_updated) + di->batt_data.percent = ret.intval; break; default: break; @@ -1210,7 +1233,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) * this way */ if (!charger_status || - (di->events.batt_unknown && !di->bat->chg_unknown_bat)) { + (di->events.batt_unknown && !di->bm->chg_unknown_bat)) { if (di->charge_state != STATE_HANDHELD) { di->events.safety_timer_expired = false; abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); @@ -1394,8 +1417,8 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_NORMAL_INIT: abx500_chargalg_start_charging(di, - di->bat->bat_type[di->bat->batt_id].normal_vol_lvl, - di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + di->bm->bat_type[di->bm->batt_id].normal_vol_lvl, + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); abx500_chargalg_state_to(di, STATE_NORMAL); abx500_chargalg_start_safety_timer(di); abx500_chargalg_stop_maintenance_timer(di); @@ -1411,7 +1434,7 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) handle_maxim_chg_curr(di); if (di->charge_status == POWER_SUPPLY_STATUS_FULL && di->maintenance_chg) { - if (di->bat->no_maintenance) + if (di->bm->no_maintenance) abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE_INIT); else @@ -1424,28 +1447,25 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_WAIT_FOR_RECHARGE_INIT: abx500_chargalg_hold_charging(di); abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE); - di->rch_cnt = RCH_COND_CNT; /* Intentional fallthrough */ case STATE_WAIT_FOR_RECHARGE: - if (di->batt_data.volt <= - di->bat->bat_type[di->bat->batt_id].recharge_vol) { - if (di->rch_cnt-- == 0) - abx500_chargalg_state_to(di, STATE_NORMAL_INIT); - } else - di->rch_cnt = RCH_COND_CNT; + if (di->batt_data.percent <= + di->bm->bat_type[di->bm->batt_id]. + recharge_cap) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); break; case STATE_MAINTENANCE_A_INIT: abx500_chargalg_stop_safety_timer(di); abx500_chargalg_start_maintenance_timer(di, - di->bat->bat_type[ - di->bat->batt_id].maint_a_chg_timer_h); + di->bm->bat_type[ + di->bm->batt_id].maint_a_chg_timer_h); abx500_chargalg_start_charging(di, - di->bat->bat_type[ - di->bat->batt_id].maint_a_vol_lvl, - di->bat->bat_type[ - di->bat->batt_id].maint_a_cur_lvl); + di->bm->bat_type[ + di->bm->batt_id].maint_a_vol_lvl, + di->bm->bat_type[ + di->bm->batt_id].maint_a_cur_lvl); abx500_chargalg_state_to(di, STATE_MAINTENANCE_A); power_supply_changed(&di->chargalg_psy); /* Intentional fallthrough*/ @@ -1459,13 +1479,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_MAINTENANCE_B_INIT: abx500_chargalg_start_maintenance_timer(di, - di->bat->bat_type[ - di->bat->batt_id].maint_b_chg_timer_h); + di->bm->bat_type[ + di->bm->batt_id].maint_b_chg_timer_h); abx500_chargalg_start_charging(di, - di->bat->bat_type[ - di->bat->batt_id].maint_b_vol_lvl, - di->bat->bat_type[ - di->bat->batt_id].maint_b_cur_lvl); + di->bm->bat_type[ + di->bm->batt_id].maint_b_vol_lvl, + di->bm->bat_type[ + di->bm->batt_id].maint_b_cur_lvl); abx500_chargalg_state_to(di, STATE_MAINTENANCE_B); power_supply_changed(&di->chargalg_psy); /* Intentional fallthrough*/ @@ -1479,10 +1499,10 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) case STATE_TEMP_LOWHIGH_INIT: abx500_chargalg_start_charging(di, - di->bat->bat_type[ - di->bat->batt_id].low_high_vol_lvl, - di->bat->bat_type[ - di->bat->batt_id].low_high_cur_lvl); + di->bm->bat_type[ + di->bm->batt_id].low_high_vol_lvl, + di->bm->bat_type[ + di->bm->batt_id].low_high_cur_lvl); abx500_chargalg_stop_maintenance_timer(di); di->charge_status = POWER_SUPPLY_STATUS_CHARGING; abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH); @@ -1543,11 +1563,11 @@ static void abx500_chargalg_periodic_work(struct work_struct *work) if (di->chg_info.conn_chg) queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, - di->bat->interval_charging * HZ); + di->bm->interval_charging * HZ); else queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, - di->bat->interval_not_charging * HZ); + di->bm->interval_not_charging * HZ); } /** @@ -1614,10 +1634,13 @@ static int abx500_chargalg_get_property(struct power_supply *psy, if (di->events.batt_ovv) { val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; } else if (di->events.btemp_underover) { - if (di->batt_data.temp <= di->bat->temp_under) + if (di->batt_data.temp <= di->bm->temp_under) val->intval = POWER_SUPPLY_HEALTH_COLD; else val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + } else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED || + di->charge_state == STATE_SAFETY_TIMER_EXPIRED_INIT) { + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; } else { val->intval = POWER_SUPPLY_HEALTH_GOOD; } @@ -1631,6 +1654,25 @@ static int abx500_chargalg_get_property(struct power_supply *psy, /* Exposure to the sysfs interface */ /** + * abx500_chargalg_sysfs_show() - sysfs show operations + * @kobj: pointer to the struct kobject + * @attr: pointer to the struct attribute + * @buf: buffer that holds the parameter to send to userspace + * + * Returns a buffer to be displayed in user space + */ +static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj, + struct attribute *attr, char *buf) +{ + struct abx500_chargalg *di = container_of(kobj, + struct abx500_chargalg, chargalg_kobject); + + return sprintf(buf, "%d\n", + di->susp_status.ac_suspended && + di->susp_status.usb_suspended); +} + +/** * abx500_chargalg_sysfs_charger() - sysfs store operations * @kobj: pointer to the struct kobject * @attr: pointer to the struct attribute @@ -1698,7 +1740,7 @@ static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj, static struct attribute abx500_chargalg_en_charger = \ { .name = "chargalg", - .mode = S_IWUGO, + .mode = S_IRUGO | S_IWUSR, }; static struct attribute *abx500_chargalg_chg[] = { @@ -1707,6 +1749,7 @@ static struct attribute *abx500_chargalg_chg[] = { }; static const struct sysfs_ops abx500_chargalg_sysfs_ops = { + .show = abx500_chargalg_sysfs_show, .store = abx500_chargalg_sysfs_charger, }; @@ -1806,6 +1849,7 @@ static char *supply_interface[] = { static int abx500_chargalg_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; struct abx500_chargalg *di; int ret = 0; @@ -1814,21 +1858,19 @@ static int abx500_chargalg_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__); return -ENOMEM; } - di->bat = pdev->mfd_cell->platform_data; - if (!di->bat) { - if (np) { - ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); - if (ret) { - dev_err(&pdev->dev, - "failed to get battery information\n"); - return ret; - } - } else { - dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n"); - return -EINVAL; + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; } - } else { - dev_info(&pdev->dev, "falling back to legacy platform data\n"); } /* get device struct */ diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c index ee842b37f462..ca91396fc48e 100644 --- a/drivers/power/bq2415x_charger.c +++ b/drivers/power/bq2415x_charger.c @@ -28,7 +28,6 @@ * http://www.ti.com/product/bq24155 */ -#include <linux/version.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/param.h> @@ -734,12 +733,10 @@ static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode) int charger = 0; int boost = 0; - if (mode == BQ2415X_MODE_HOST_CHARGER || - mode == BQ2415X_MODE_DEDICATED_CHARGER) - charger = 1; - if (mode == BQ2415X_MODE_BOOST) boost = 1; + else if (mode != BQ2415X_MODE_OFF) + charger = 1; if (!charger) ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE); @@ -751,6 +748,10 @@ static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode) return ret; switch (mode) { + case BQ2415X_MODE_OFF: + dev_dbg(bq->dev, "changing mode to: Offline\n"); + ret = bq2415x_set_current_limit(bq, 100); + break; case BQ2415X_MODE_NONE: dev_dbg(bq->dev, "changing mode to: N/A\n"); ret = bq2415x_set_current_limit(bq, 100); @@ -843,7 +844,7 @@ static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg) dev_err(bq->dev, "%s\n", msg); if (bq->automode > 0) bq->automode = 0; - bq2415x_set_mode(bq, BQ2415X_MODE_NONE); + bq2415x_set_mode(bq, BQ2415X_MODE_OFF); bq2415x_set_autotimer(bq, 0); } @@ -1136,6 +1137,10 @@ static ssize_t bq2415x_sysfs_set_mode(struct device *dev, return -ENOSYS; bq->automode = 1; mode = bq->reported_mode; + } else if (strncmp(buf, "off", 3) == 0) { + if (bq->automode > 0) + bq->automode = 0; + mode = BQ2415X_MODE_OFF; } else if (strncmp(buf, "none", 4) == 0) { if (bq->automode > 0) bq->automode = 0; @@ -1183,6 +1188,9 @@ static ssize_t bq2415x_sysfs_show_mode(struct device *dev, ret += sprintf(buf+ret, "auto ("); switch (bq->mode) { + case BQ2415X_MODE_OFF: + ret += sprintf(buf+ret, "off"); + break; case BQ2415X_MODE_NONE: ret += sprintf(buf+ret, "none"); break; @@ -1217,6 +1225,8 @@ static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev, return -EINVAL; switch (bq->reported_mode) { + case BQ2415X_MODE_OFF: + return sprintf(buf, "off\n"); case BQ2415X_MODE_NONE: return sprintf(buf, "none\n"); case BQ2415X_MODE_HOST_CHARGER: @@ -1523,7 +1533,7 @@ static int bq2415x_probe(struct i2c_client *client, goto error_1; } - bq = kzalloc(sizeof(*bq), GFP_KERNEL); + bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL); if (!bq) { dev_err(&client->dev, "failed to allocate device data\n"); ret = -ENOMEM; @@ -1536,8 +1546,8 @@ static int bq2415x_probe(struct i2c_client *client, bq->dev = &client->dev; bq->chip = id->driver_data; bq->name = name; - bq->mode = BQ2415X_MODE_NONE; - bq->reported_mode = BQ2415X_MODE_NONE; + bq->mode = BQ2415X_MODE_OFF; + bq->reported_mode = BQ2415X_MODE_OFF; bq->autotimer = 0; bq->automode = 0; @@ -1549,19 +1559,19 @@ static int bq2415x_probe(struct i2c_client *client, ret = bq2415x_power_supply_init(bq); if (ret) { dev_err(bq->dev, "failed to register power supply: %d\n", ret); - goto error_3; + goto error_2; } ret = bq2415x_sysfs_init(bq); if (ret) { dev_err(bq->dev, "failed to create sysfs entries: %d\n", ret); - goto error_4; + goto error_3; } ret = bq2415x_set_defaults(bq); if (ret) { dev_err(bq->dev, "failed to set default values: %d\n", ret); - goto error_5; + goto error_4; } if (bq->init_data.set_mode_hook) { @@ -1585,12 +1595,10 @@ static int bq2415x_probe(struct i2c_client *client, dev_info(bq->dev, "driver registered\n"); return 0; -error_5: - bq2415x_sysfs_exit(bq); error_4: - bq2415x_power_supply_exit(bq); + bq2415x_sysfs_exit(bq); error_3: - kfree(bq); + bq2415x_power_supply_exit(bq); error_2: kfree(name); error_1: @@ -1622,7 +1630,6 @@ static int bq2415x_remove(struct i2c_client *client) dev_info(bq->dev, "driver unregistered\n"); kfree(bq->name); - kfree(bq); return 0; } @@ -1652,18 +1659,7 @@ static struct i2c_driver bq2415x_driver = { .remove = bq2415x_remove, .id_table = bq2415x_i2c_id_table, }; - -static int __init bq2415x_init(void) -{ - return i2c_add_driver(&bq2415x_driver); -} -module_init(bq2415x_init); - -static void __exit bq2415x_exit(void) -{ - i2c_del_driver(&bq2415x_driver); -} -module_exit(bq2415x_exit); +module_i2c_driver(bq2415x_driver); MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>"); MODULE_DESCRIPTION("bq2415x charger driver"); diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 36b34efdafc9..8ccf5d7d0add 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -299,7 +299,7 @@ static int bq27x00_battery_read_energy(struct bq27x00_device_info *di) } /* - * Return the battery temperature in tenths of degree Celsius + * Return the battery temperature in tenths of degree Kelvin * Or < 0 if something fails. */ static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di) @@ -312,10 +312,8 @@ static int bq27x00_battery_read_temperature(struct bq27x00_device_info *di) return temp; } - if (bq27xxx_is_chip_version_higher(di)) - temp -= 2731; - else - temp = ((temp * 5) - 5463) / 2; + if (!bq27xxx_is_chip_version_higher(di)) + temp = 5 * temp / 2; return temp; } @@ -448,7 +446,6 @@ static void bq27x00_update(struct bq27x00_device_info *di) cache.temperature = bq27x00_battery_read_temperature(di); if (!is_bq27425) cache.cycle_count = bq27x00_battery_read_cyct(di); - cache.cycle_count = bq27x00_battery_read_cyct(di); cache.power_avg = bq27x00_battery_read_pwr_avg(di, BQ27x00_POWER_AVG); @@ -642,6 +639,8 @@ static int bq27x00_battery_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_TEMP: ret = bq27x00_simple_value(di->cache.temperature, val); + if (ret == 0) + val->intval -= 2731; break; case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: ret = bq27x00_simple_value(di->cache.time_to_empty, val); @@ -696,7 +695,6 @@ static int bq27x00_powersupply_init(struct bq27x00_device_info *di) int ret; di->bat.type = POWER_SUPPLY_TYPE_BATTERY; - di->chip = BQ27425; if (di->chip == BQ27425) { di->bat.properties = bq27425_battery_props; di->bat.num_properties = ARRAY_SIZE(bq27425_battery_props); diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c index 6ba047f5ac2c..8acc3f8d303c 100644 --- a/drivers/power/charger-manager.c +++ b/drivers/power/charger-manager.c @@ -669,15 +669,21 @@ static void _setup_polling(struct work_struct *work) WARN(cm_wq == NULL, "charger-manager: workqueue not initialized" ". try it later. %s\n", __func__); + /* + * Use mod_delayed_work() iff the next polling interval should + * occur before the currently scheduled one. If @cm_monitor_work + * isn't active, the end result is the same, so no need to worry + * about stale @next_polling. + */ _next_polling = jiffies + polling_jiffy; - if (!delayed_work_pending(&cm_monitor_work) || - (delayed_work_pending(&cm_monitor_work) && - time_after(next_polling, _next_polling))) { - next_polling = jiffies + polling_jiffy; + if (time_before(_next_polling, next_polling)) { mod_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy); + next_polling = _next_polling; + } else { + if (queue_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy)) + next_polling = _next_polling; } - out: mutex_unlock(&cm_list_mtx); } @@ -751,8 +757,7 @@ static void misc_event_handler(struct charger_manager *cm, if (cm_suspended) device_set_wakeup_capable(cm->dev, true); - if (!delayed_work_pending(&cm_monitor_work) && - is_polling_required(cm) && cm->desc->polling_interval_ms) + if (is_polling_required(cm) && cm->desc->polling_interval_ms) schedule_work(&setup_polling); uevent_notify(cm, default_event_names[type]); } @@ -1170,8 +1175,7 @@ static int charger_extcon_notifier(struct notifier_block *self, * when charger cable is attached. */ if (cable->attached && is_polling_required(cable->cm)) { - if (work_pending(&setup_polling)) - cancel_work_sync(&setup_polling); + cancel_work_sync(&setup_polling); schedule_work(&setup_polling); } @@ -1215,6 +1219,55 @@ static int charger_extcon_init(struct charger_manager *cm, return ret; } +/** + * charger_manager_register_extcon - Register extcon device to recevie state + * of charger cable. + * @cm: the Charger Manager representing the battery. + * + * This function support EXTCON(External Connector) subsystem to detect the + * state of charger cables for enabling or disabling charger(regulator) and + * select the charger cable for charging among a number of external cable + * according to policy of H/W board. + */ +static int charger_manager_register_extcon(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + struct charger_regulator *charger; + int ret = 0; + int i; + int j; + + for (i = 0; i < desc->num_charger_regulators; i++) { + charger = &desc->charger_regulators[i]; + + charger->consumer = regulator_get(cm->dev, + charger->regulator_name); + if (charger->consumer == NULL) { + dev_err(cm->dev, "Cannot find charger(%s)n", + charger->regulator_name); + ret = -EINVAL; + goto err; + } + charger->cm = cm; + + for (j = 0; j < charger->num_cables; j++) { + struct charger_cable *cable = &charger->cables[j]; + + ret = charger_extcon_init(cm, cable); + if (ret < 0) { + dev_err(cm->dev, "Cannot initialize charger(%s)n", + charger->regulator_name); + goto err; + } + cable->charger = charger; + cable->cm = cm; + } + } + +err: + return ret; +} + /* help function of sysfs node to control charger(regulator) */ static ssize_t charger_name_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -1274,7 +1327,7 @@ static ssize_t charger_externally_control_store(struct device *dev, for (i = 0; i < desc->num_charger_regulators; i++) { if (&desc->charger_regulators[i] != charger && - !desc->charger_regulators[i].externally_control) { + !desc->charger_regulators[i].externally_control) { /* * At least, one charger is controlled by * charger-manager @@ -1303,13 +1356,107 @@ static ssize_t charger_externally_control_store(struct device *dev, return count; } +/** + * charger_manager_register_sysfs - Register sysfs entry for each charger + * @cm: the Charger Manager representing the battery. + * + * This function add sysfs entry for charger(regulator) to control charger from + * user-space. If some development board use one more chargers for charging + * but only need one charger on specific case which is dependent on user + * scenario or hardware restrictions, the user enter 1 or 0(zero) to '/sys/ + * class/power_supply/battery/charger.[index]/externally_control'. For example, + * if user enter 1 to 'sys/class/power_supply/battery/charger.[index]/ + * externally_control, this charger isn't controlled from charger-manager and + * always stay off state of regulator. + */ +static int charger_manager_register_sysfs(struct charger_manager *cm) +{ + struct charger_desc *desc = cm->desc; + struct charger_regulator *charger; + int chargers_externally_control = 1; + char buf[11]; + char *str; + int ret = 0; + int i; + + /* Create sysfs entry to control charger(regulator) */ + for (i = 0; i < desc->num_charger_regulators; i++) { + charger = &desc->charger_regulators[i]; + + snprintf(buf, 10, "charger.%d", i); + str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL); + if (!str) { + dev_err(cm->dev, "Cannot allocate memory: %s\n", + charger->regulator_name); + ret = -ENOMEM; + goto err; + } + strcpy(str, buf); + + charger->attrs[0] = &charger->attr_name.attr; + charger->attrs[1] = &charger->attr_state.attr; + charger->attrs[2] = &charger->attr_externally_control.attr; + charger->attrs[3] = NULL; + charger->attr_g.name = str; + charger->attr_g.attrs = charger->attrs; + + sysfs_attr_init(&charger->attr_name.attr); + charger->attr_name.attr.name = "name"; + charger->attr_name.attr.mode = 0444; + charger->attr_name.show = charger_name_show; + + sysfs_attr_init(&charger->attr_state.attr); + charger->attr_state.attr.name = "state"; + charger->attr_state.attr.mode = 0444; + charger->attr_state.show = charger_state_show; + + sysfs_attr_init(&charger->attr_externally_control.attr); + charger->attr_externally_control.attr.name + = "externally_control"; + charger->attr_externally_control.attr.mode = 0644; + charger->attr_externally_control.show + = charger_externally_control_show; + charger->attr_externally_control.store + = charger_externally_control_store; + + if (!desc->charger_regulators[i].externally_control || + !chargers_externally_control) + chargers_externally_control = 0; + + dev_info(cm->dev, "'%s' regulator's externally_control" + "is %d\n", charger->regulator_name, + charger->externally_control); + + ret = sysfs_create_group(&cm->charger_psy.dev->kobj, + &charger->attr_g); + if (ret < 0) { + dev_err(cm->dev, "Cannot create sysfs entry" + "of %s regulator\n", + charger->regulator_name); + ret = -EINVAL; + goto err; + } + } + + if (chargers_externally_control) { + dev_err(cm->dev, "Cannot register regulator because " + "charger-manager must need at least " + "one charger for charging battery\n"); + + ret = -EINVAL; + goto err; + } + +err: + return ret; +} + static int charger_manager_probe(struct platform_device *pdev) { struct charger_desc *desc = dev_get_platdata(&pdev->dev); struct charger_manager *cm; int ret = 0, i = 0; int j = 0; - int chargers_externally_control = 1; union power_supply_propval val; if (g_desc && !rtc_dev && g_desc->rtc_name) { @@ -1440,11 +1587,10 @@ static int charger_manager_probe(struct platform_device *pdev) memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default)); - if (!desc->psy_name) { + if (!desc->psy_name) strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX); - } else { + else strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX); - } cm->charger_psy.name = cm->psy_name_buf; /* Allocate for psy properties because they may vary */ @@ -1496,105 +1642,19 @@ static int charger_manager_probe(struct platform_device *pdev) goto err_register; } - for (i = 0 ; i < desc->num_charger_regulators ; i++) { - struct charger_regulator *charger - = &desc->charger_regulators[i]; - char buf[11]; - char *str; - - charger->consumer = regulator_get(&pdev->dev, - charger->regulator_name); - if (charger->consumer == NULL) { - dev_err(&pdev->dev, "Cannot find charger(%s)n", - charger->regulator_name); - ret = -EINVAL; - goto err_chg_get; - } - charger->cm = cm; - - for (j = 0 ; j < charger->num_cables ; j++) { - struct charger_cable *cable = &charger->cables[j]; - - ret = charger_extcon_init(cm, cable); - if (ret < 0) { - dev_err(&pdev->dev, "Cannot find charger(%s)n", - charger->regulator_name); - goto err_extcon; - } - cable->charger = charger; - cable->cm = cm; - } - - /* Create sysfs entry to control charger(regulator) */ - snprintf(buf, 10, "charger.%d", i); - str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL); - if (!str) { - for (i--; i >= 0; i--) { - charger = &desc->charger_regulators[i]; - kfree(charger->attr_g.name); - } - ret = -ENOMEM; - - goto err_extcon; - } - strcpy(str, buf); - - charger->attrs[0] = &charger->attr_name.attr; - charger->attrs[1] = &charger->attr_state.attr; - charger->attrs[2] = &charger->attr_externally_control.attr; - charger->attrs[3] = NULL; - charger->attr_g.name = str; - charger->attr_g.attrs = charger->attrs; - - sysfs_attr_init(&charger->attr_name.attr); - charger->attr_name.attr.name = "name"; - charger->attr_name.attr.mode = 0444; - charger->attr_name.show = charger_name_show; - - sysfs_attr_init(&charger->attr_state.attr); - charger->attr_state.attr.name = "state"; - charger->attr_state.attr.mode = 0444; - charger->attr_state.show = charger_state_show; - - sysfs_attr_init(&charger->attr_externally_control.attr); - charger->attr_externally_control.attr.name - = "externally_control"; - charger->attr_externally_control.attr.mode = 0644; - charger->attr_externally_control.show - = charger_externally_control_show; - charger->attr_externally_control.store - = charger_externally_control_store; - - if (!desc->charger_regulators[i].externally_control || - !chargers_externally_control) { - chargers_externally_control = 0; - } - dev_info(&pdev->dev, "'%s' regulator's externally_control" - "is %d\n", charger->regulator_name, - charger->externally_control); - - ret = sysfs_create_group(&cm->charger_psy.dev->kobj, - &charger->attr_g); - if (ret < 0) { - dev_info(&pdev->dev, "Cannot create sysfs entry" - "of %s regulator\n", - charger->regulator_name); - } - } - - if (chargers_externally_control) { - dev_err(&pdev->dev, "Cannot register regulator because " - "charger-manager must need at least " - "one charger for charging battery\n"); - - ret = -EINVAL; - goto err_chg_enable; + /* Register extcon device for charger cable */ + ret = charger_manager_register_extcon(cm); + if (ret < 0) { + dev_err(&pdev->dev, "Cannot initialize extcon device\n"); + goto err_reg_extcon; } - ret = try_charger_enable(cm, true); - if (ret) { - dev_err(&pdev->dev, "Cannot enable charger regulators\n"); - goto err_chg_enable; + /* Register sysfs entry for charger(regulator) */ + ret = charger_manager_register_sysfs(cm); + if (ret < 0) { + dev_err(&pdev->dev, + "Cannot initialize sysfs entry of regulator\n"); + goto err_reg_sysfs; } /* Add to the list */ @@ -1613,27 +1673,28 @@ static int charger_manager_probe(struct platform_device *pdev) return 0; -err_chg_enable: +err_reg_sysfs: for (i = 0; i < desc->num_charger_regulators; i++) { struct charger_regulator *charger; charger = &desc->charger_regulators[i]; sysfs_remove_group(&cm->charger_psy.dev->kobj, &charger->attr_g); + kfree(charger->attr_g.name); } -err_extcon: - for (i = 0 ; i < desc->num_charger_regulators ; i++) { - struct charger_regulator *charger - = &desc->charger_regulators[i]; - for (j = 0 ; j < charger->num_cables ; j++) { +err_reg_extcon: + for (i = 0; i < desc->num_charger_regulators; i++) { + struct charger_regulator *charger; + + charger = &desc->charger_regulators[i]; + for (j = 0; j < charger->num_cables; j++) { struct charger_cable *cable = &charger->cables[j]; extcon_unregister_interest(&cable->extcon_dev); } - } -err_chg_get: - for (i = 0 ; i < desc->num_charger_regulators ; i++) + regulator_put(desc->charger_regulators[i].consumer); + } power_supply_unregister(&cm->charger_psy); err_register: @@ -1661,10 +1722,8 @@ static int charger_manager_remove(struct platform_device *pdev) list_del(&cm->entry); mutex_unlock(&cm_list_mtx); - if (work_pending(&setup_polling)) - cancel_work_sync(&setup_polling); - if (delayed_work_pending(&cm_monitor_work)) - cancel_delayed_work_sync(&cm_monitor_work); + cancel_work_sync(&setup_polling); + cancel_delayed_work_sync(&cm_monitor_work); for (i = 0 ; i < desc->num_charger_regulators ; i++) { struct charger_regulator *charger @@ -1733,8 +1792,7 @@ static int cm_suspend_prepare(struct device *dev) cm_suspended = true; } - if (delayed_work_pending(&cm->fullbatt_vchk_work)) - cancel_delayed_work(&cm->fullbatt_vchk_work); + cancel_delayed_work(&cm->fullbatt_vchk_work); cm->status_save_ext_pwr_inserted = is_ext_pwr_online(cm); cm->status_save_batt = is_batt_present(cm); diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c index 94762e67e22b..e8c5a391a498 100644 --- a/drivers/power/da9030_battery.c +++ b/drivers/power/da9030_battery.c @@ -22,6 +22,7 @@ #include <linux/debugfs.h> #include <linux/seq_file.h> +#include <linux/notifier.h> #define DA9030_FAULT_LOG 0x0a #define DA9030_FAULT_LOG_OVER_TEMP (1 << 7) diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c index 3c5c2e459d73..08193feb3b08 100644 --- a/drivers/power/da9052-battery.c +++ b/drivers/power/da9052-battery.c @@ -337,7 +337,7 @@ static unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp) if (adc_temp > vc_tbl_ref[DA9052_VC_TBL_REF_SZ - 1]) return DA9052_VC_TBL_REF_SZ - 1; - for (i = 0; i < DA9052_VC_TBL_REF_SZ; i++) { + for (i = 0; i < DA9052_VC_TBL_REF_SZ - 1; i++) { if ((adc_temp > vc_tbl_ref[i]) && (adc_temp <= DA9052_MEAN(vc_tbl_ref[i], vc_tbl_ref[i + 1]))) return i; diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c index 2fa9b6bf1f3f..e7301b3ed623 100644 --- a/drivers/power/ds2782_battery.c +++ b/drivers/power/ds2782_battery.c @@ -7,6 +7,8 @@ * * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il> * + * UEvent sending added by Evgeny Romanov <romanov@neurosoft.ru> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -19,6 +21,7 @@ #include <linux/errno.h> #include <linux/swab.h> #include <linux/i2c.h> +#include <linux/delay.h> #include <linux/idr.h> #include <linux/power_supply.h> #include <linux/slab.h> @@ -40,6 +43,8 @@ #define DS2786_CURRENT_UNITS 25 +#define DS278x_DELAY 1000 + struct ds278x_info; struct ds278x_battery_ops { @@ -54,8 +59,11 @@ struct ds278x_info { struct i2c_client *client; struct power_supply battery; struct ds278x_battery_ops *ops; + struct delayed_work bat_work; int id; int rsns; + int capacity; + int status; /* State Of Charge */ }; static DEFINE_IDR(battery_id); @@ -220,6 +228,8 @@ static int ds278x_get_status(struct ds278x_info *info, int *status) if (err) return err; + info->capacity = capacity; + if (capacity == 100) *status = POWER_SUPPLY_STATUS_FULL; else if (current_uA == 0) @@ -267,6 +277,27 @@ static int ds278x_battery_get_property(struct power_supply *psy, return ret; } +static void ds278x_bat_update(struct ds278x_info *info) +{ + int old_status = info->status; + int old_capacity = info->capacity; + + ds278x_get_status(info, &info->status); + + if ((old_status != info->status) || (old_capacity != info->capacity)) + power_supply_changed(&info->battery); +} + +static void ds278x_bat_work(struct work_struct *work) +{ + struct ds278x_info *info; + + info = container_of(work, struct ds278x_info, bat_work.work); + ds278x_bat_update(info); + + schedule_delayed_work(&info->bat_work, DS278x_DELAY); +} + static enum power_supply_property ds278x_battery_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_CAPACITY, @@ -295,10 +326,39 @@ static int ds278x_battery_remove(struct i2c_client *client) idr_remove(&battery_id, info->id); mutex_unlock(&battery_lock); + cancel_delayed_work(&info->bat_work); + kfree(info); return 0; } +#ifdef CONFIG_PM + +static int ds278x_suspend(struct i2c_client *client, + pm_message_t state) +{ + struct ds278x_info *info = i2c_get_clientdata(client); + + cancel_delayed_work(&info->bat_work); + return 0; +} + +static int ds278x_resume(struct i2c_client *client) +{ + struct ds278x_info *info = i2c_get_clientdata(client); + + schedule_delayed_work(&info->bat_work, DS278x_DELAY); + return 0; +} + +#else + +#define ds278x_suspend NULL +#define ds278x_resume NULL + +#endif /* CONFIG_PM */ + + enum ds278x_num_id { DS2782 = 0, DS2786, @@ -368,10 +428,17 @@ static int ds278x_battery_probe(struct i2c_client *client, info->ops = &ds278x_ops[id->driver_data]; ds278x_power_supply_init(&info->battery); + info->capacity = 100; + info->status = POWER_SUPPLY_STATUS_FULL; + + INIT_DELAYED_WORK(&info->bat_work, ds278x_bat_work); + ret = power_supply_register(&client->dev, &info->battery); if (ret) { dev_err(&client->dev, "failed to register battery\n"); goto fail_register; + } else { + schedule_delayed_work(&info->bat_work, DS278x_DELAY); } return 0; @@ -401,6 +468,8 @@ static struct i2c_driver ds278x_battery_driver = { }, .probe = ds278x_battery_probe, .remove = ds278x_battery_remove, + .suspend = ds278x_suspend, + .resume = ds278x_resume, .id_table = ds278x_id, }; module_i2c_driver(ds278x_battery_driver); diff --git a/drivers/power/generic-adc-battery.c b/drivers/power/generic-adc-battery.c index 32ce17e235c0..836816b82cbc 100644 --- a/drivers/power/generic-adc-battery.c +++ b/drivers/power/generic-adc-battery.c @@ -263,9 +263,6 @@ static int gab_probe(struct platform_device *pdev) psy->external_power_changed = gab_ext_power_changed; adc_bat->pdata = pdata; - /* calculate the total number of channels */ - chan = ARRAY_SIZE(gab_chan_name); - /* * copying the static properties and allocating extra memory for holding * the extra configurable properties received from platform data. @@ -291,6 +288,7 @@ static int gab_probe(struct platform_device *pdev) gab_chan_name[chan]); if (IS_ERR(adc_bat->channel[chan])) { ret = PTR_ERR(adc_bat->channel[chan]); + adc_bat->channel[chan] = NULL; } else { /* copying properties for supported channels only */ memcpy(properties + sizeof(*(psy->properties)) * index, @@ -344,8 +342,10 @@ err_gpio: gpio_req_fail: power_supply_unregister(psy); err_reg_fail: - for (chan = 0; ARRAY_SIZE(gab_chan_name); chan++) - iio_channel_release(adc_bat->channel[chan]); + for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) { + if (adc_bat->channel[chan]) + iio_channel_release(adc_bat->channel[chan]); + } second_mem_fail: kfree(psy->properties); first_mem_fail: @@ -365,8 +365,10 @@ static int gab_remove(struct platform_device *pdev) gpio_free(pdata->gpio_charge_finished); } - for (chan = 0; ARRAY_SIZE(gab_chan_name); chan++) - iio_channel_release(adc_bat->channel[chan]); + for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) { + if (adc_bat->channel[chan]) + iio_channel_release(adc_bat->channel[chan]); + } kfree(adc_bat->psy.properties); cancel_delayed_work(&adc_bat->bat_work); diff --git a/drivers/power/goldfish_battery.c b/drivers/power/goldfish_battery.c new file mode 100644 index 000000000000..c10f460f986f --- /dev/null +++ b/drivers/power/goldfish_battery.c @@ -0,0 +1,236 @@ +/* + * Power supply driver for the goldfish emulator + * + * Copyright (C) 2008 Google, Inc. + * Copyright (C) 2012 Intel, Inc. + * Copyright (C) 2013 Intel, Inc. + * Author: Mike Lockwood <lockwood@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +struct goldfish_battery_data { + void __iomem *reg_base; + int irq; + spinlock_t lock; + + struct power_supply battery; + struct power_supply ac; +}; + +#define GOLDFISH_BATTERY_READ(data, addr) \ + (readl(data->reg_base + addr)) +#define GOLDFISH_BATTERY_WRITE(data, addr, x) \ + (writel(x, data->reg_base + addr)) + +/* + * Temporary variable used between goldfish_battery_probe() and + * goldfish_battery_open(). + */ +static struct goldfish_battery_data *battery_data; + +enum { + /* status register */ + BATTERY_INT_STATUS = 0x00, + /* set this to enable IRQ */ + BATTERY_INT_ENABLE = 0x04, + + BATTERY_AC_ONLINE = 0x08, + BATTERY_STATUS = 0x0C, + BATTERY_HEALTH = 0x10, + BATTERY_PRESENT = 0x14, + BATTERY_CAPACITY = 0x18, + + BATTERY_STATUS_CHANGED = 1U << 0, + AC_STATUS_CHANGED = 1U << 1, + BATTERY_INT_MASK = BATTERY_STATUS_CHANGED | AC_STATUS_CHANGED, +}; + + +static int goldfish_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct goldfish_battery_data *data = container_of(psy, + struct goldfish_battery_data, ac); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_AC_ONLINE); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int goldfish_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct goldfish_battery_data *data = container_of(psy, + struct goldfish_battery_data, battery); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_STATUS); + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_HEALTH); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_PRESENT); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CAPACITY); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property goldfish_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CAPACITY, +}; + +static enum power_supply_property goldfish_ac_props[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static irqreturn_t goldfish_battery_interrupt(int irq, void *dev_id) +{ + unsigned long irq_flags; + struct goldfish_battery_data *data = dev_id; + uint32_t status; + + spin_lock_irqsave(&data->lock, irq_flags); + + /* read status flags, which will clear the interrupt */ + status = GOLDFISH_BATTERY_READ(data, BATTERY_INT_STATUS); + status &= BATTERY_INT_MASK; + + if (status & BATTERY_STATUS_CHANGED) + power_supply_changed(&data->battery); + if (status & AC_STATUS_CHANGED) + power_supply_changed(&data->ac); + + spin_unlock_irqrestore(&data->lock, irq_flags); + return status ? IRQ_HANDLED : IRQ_NONE; +} + + +static int goldfish_battery_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + struct goldfish_battery_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + spin_lock_init(&data->lock); + + data->battery.properties = goldfish_battery_props; + data->battery.num_properties = ARRAY_SIZE(goldfish_battery_props); + data->battery.get_property = goldfish_battery_get_property; + data->battery.name = "battery"; + data->battery.type = POWER_SUPPLY_TYPE_BATTERY; + + data->ac.properties = goldfish_ac_props; + data->ac.num_properties = ARRAY_SIZE(goldfish_ac_props); + data->ac.get_property = goldfish_ac_get_property; + data->ac.name = "ac"; + data->ac.type = POWER_SUPPLY_TYPE_MAINS; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "platform_get_resource failed\n"); + return -ENODEV; + } + + data->reg_base = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1); + if (data->reg_base == NULL) { + dev_err(&pdev->dev, "unable to remap MMIO\n"); + return -ENOMEM; + } + + data->irq = platform_get_irq(pdev, 0); + if (data->irq < 0) { + dev_err(&pdev->dev, "platform_get_irq failed\n"); + return -ENODEV; + } + + ret = devm_request_irq(&pdev->dev, data->irq, goldfish_battery_interrupt, + IRQF_SHARED, pdev->name, data); + if (ret) + return ret; + + ret = power_supply_register(&pdev->dev, &data->ac); + if (ret) + return ret; + + ret = power_supply_register(&pdev->dev, &data->battery); + if (ret) { + power_supply_unregister(&data->ac); + return ret; + } + + platform_set_drvdata(pdev, data); + battery_data = data; + + GOLDFISH_BATTERY_WRITE(data, BATTERY_INT_ENABLE, BATTERY_INT_MASK); + return 0; +} + +static int goldfish_battery_remove(struct platform_device *pdev) +{ + struct goldfish_battery_data *data = platform_get_drvdata(pdev); + + power_supply_unregister(&data->battery); + power_supply_unregister(&data->ac); + battery_data = NULL; + return 0; +} + +static struct platform_driver goldfish_battery_device = { + .probe = goldfish_battery_probe, + .remove = goldfish_battery_remove, + .driver = { + .name = "goldfish-battery" + } +}; +module_platform_driver(goldfish_battery_device); + +MODULE_AUTHOR("Mike Lockwood lockwood@android.com"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Battery driver for the Goldfish emulator"); diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c index 4ee71a90e248..5ef41b819172 100644 --- a/drivers/power/lp8727_charger.c +++ b/drivers/power/lp8727_charger.c @@ -367,28 +367,28 @@ static int lp8727_battery_get_property(struct power_supply *psy, return -EINVAL; if (pdata->get_batt_present) - val->intval = pchg->pdata->get_batt_present(); + val->intval = pdata->get_batt_present(); break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: if (!pdata) return -EINVAL; if (pdata->get_batt_level) - val->intval = pchg->pdata->get_batt_level(); + val->intval = pdata->get_batt_level(); break; case POWER_SUPPLY_PROP_CAPACITY: if (!pdata) return -EINVAL; if (pdata->get_batt_capacity) - val->intval = pchg->pdata->get_batt_capacity(); + val->intval = pdata->get_batt_capacity(); break; case POWER_SUPPLY_PROP_TEMP: if (!pdata) return -EINVAL; if (pdata->get_batt_temp) - val->intval = pchg->pdata->get_batt_temp(); + val->intval = pdata->get_batt_temp(); break; default: break; diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c index 22b6407c9ca9..e33d6b2a7a56 100644 --- a/drivers/power/lp8788-charger.c +++ b/drivers/power/lp8788-charger.c @@ -367,7 +367,8 @@ static inline bool lp8788_is_valid_charger_register(u8 addr) return addr >= LP8788_CHG_START && addr <= LP8788_CHG_END; } -static int lp8788_update_charger_params(struct lp8788_charger *pchg) +static int lp8788_update_charger_params(struct platform_device *pdev, + struct lp8788_charger *pchg) { struct lp8788 *lp = pchg->lp; struct lp8788_charger_platform_data *pdata = pchg->pdata; @@ -376,7 +377,7 @@ static int lp8788_update_charger_params(struct lp8788_charger *pchg) int ret; if (!pdata || !pdata->chg_params) { - dev_info(lp->dev, "skip updating charger parameters\n"); + dev_info(&pdev->dev, "skip updating charger parameters\n"); return 0; } @@ -537,7 +538,6 @@ err_free_irq: static int lp8788_irq_register(struct platform_device *pdev, struct lp8788_charger *pchg) { - struct lp8788 *lp = pchg->lp; const char *name[] = { LP8788_CHG_IRQ, LP8788_PRSW_IRQ, LP8788_BATT_IRQ }; @@ -550,13 +550,13 @@ static int lp8788_irq_register(struct platform_device *pdev, for (i = 0; i < ARRAY_SIZE(name); i++) { ret = lp8788_set_irqs(pdev, pchg, name[i]); if (ret) { - dev_warn(lp->dev, "irq setup failed: %s\n", name[i]); + dev_warn(&pdev->dev, "irq setup failed: %s\n", name[i]); return ret; } } if (pchg->num_irqs > LP8788_MAX_CHG_IRQS) { - dev_err(lp->dev, "invalid total number of irqs: %d\n", + dev_err(&pdev->dev, "invalid total number of irqs: %d\n", pchg->num_irqs); return -EINVAL; } @@ -690,9 +690,10 @@ static int lp8788_charger_probe(struct platform_device *pdev) { struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); struct lp8788_charger *pchg; + struct device *dev = &pdev->dev; int ret; - pchg = devm_kzalloc(lp->dev, sizeof(struct lp8788_charger), GFP_KERNEL); + pchg = devm_kzalloc(dev, sizeof(struct lp8788_charger), GFP_KERNEL); if (!pchg) return -ENOMEM; @@ -700,7 +701,7 @@ static int lp8788_charger_probe(struct platform_device *pdev) pchg->pdata = lp->pdata ? lp->pdata->chg_pdata : NULL; platform_set_drvdata(pdev, pchg); - ret = lp8788_update_charger_params(pchg); + ret = lp8788_update_charger_params(pdev, pchg); if (ret) return ret; @@ -718,7 +719,7 @@ static int lp8788_charger_probe(struct platform_device *pdev) ret = lp8788_irq_register(pdev, pchg); if (ret) - dev_warn(lp->dev, "failed to register charger irq: %d\n", ret); + dev_warn(dev, "failed to register charger irq: %d\n", ret); return 0; } diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c index 22cfe9cc4727..74a0bd9bc162 100644 --- a/drivers/power/max17040_battery.c +++ b/drivers/power/max17040_battery.c @@ -207,7 +207,7 @@ static int max17040_probe(struct i2c_client *client, if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) return -EIO; - chip = kzalloc(sizeof(*chip), GFP_KERNEL); + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; @@ -225,7 +225,6 @@ static int max17040_probe(struct i2c_client *client, ret = power_supply_register(&client->dev, &chip->battery); if (ret) { dev_err(&client->dev, "failed: power supply register\n"); - kfree(chip); return ret; } @@ -244,7 +243,6 @@ static int max17040_remove(struct i2c_client *client) power_supply_unregister(&chip->battery); cancel_delayed_work(&chip->work); - kfree(chip); return 0; } diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c new file mode 100644 index 000000000000..ed48d75bb786 --- /dev/null +++ b/drivers/power/pm2301_charger.c @@ -0,0 +1,1088 @@ +/* + * Copyright 2012 ST Ericsson. + * + * Power supply driver for ST Ericsson pm2xxx_charger charger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/completion.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/kobject.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/mfd/abx500/ux500_chargalg.h> +#include <linux/pm2301_charger.h> +#include <linux/gpio.h> + +#include "pm2301_charger.h" + +#define to_pm2xxx_charger_ac_device_info(x) container_of((x), \ + struct pm2xxx_charger, ac_chg) + +static int pm2xxx_interrupt_registers[] = { + PM2XXX_REG_INT1, + PM2XXX_REG_INT2, + PM2XXX_REG_INT3, + PM2XXX_REG_INT4, + PM2XXX_REG_INT5, + PM2XXX_REG_INT6, +}; + +static enum power_supply_property pm2xxx_charger_ac_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_AVG, +}; + +static int pm2xxx_charger_voltage_map[] = { + 3500, + 3525, + 3550, + 3575, + 3600, + 3625, + 3650, + 3675, + 3700, + 3725, + 3750, + 3775, + 3800, + 3825, + 3850, + 3875, + 3900, + 3925, + 3950, + 3975, + 4000, + 4025, + 4050, + 4075, + 4100, + 4125, + 4150, + 4175, + 4200, + 4225, + 4250, + 4275, + 4300, +}; + +static int pm2xxx_charger_current_map[] = { + 200, + 200, + 400, + 600, + 800, + 1000, + 1200, + 1400, + 1600, + 1800, + 2000, + 2200, + 2400, + 2600, + 2800, + 3000, +}; + +static const struct i2c_device_id pm2xxx_ident[] = { + { "pm2301", 0 }, + { } +}; + +static void set_lpn_pin(struct pm2xxx_charger *pm2) +{ + if (pm2->ac.charger_connected) + return; + gpio_set_value(pm2->lpn_pin, 1); + + return; +} + +static void clear_lpn_pin(struct pm2xxx_charger *pm2) +{ + if (pm2->ac.charger_connected) + return; + gpio_set_value(pm2->lpn_pin, 0); + + return; +} + +static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val) +{ + int ret; + /* + * When AC adaptor is unplugged, the host + * must put LPN high to be able to + * communicate by I2C with PM2301 + * and receive I2C "acknowledge" from PM2301. + */ + mutex_lock(&pm2->lock); + set_lpn_pin(pm2); + + ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg, + 1, val); + if (ret < 0) + dev_err(pm2->dev, "Error reading register at 0x%x\n", reg); + else + ret = 0; + clear_lpn_pin(pm2); + mutex_unlock(&pm2->lock); + + return ret; +} + +static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val) +{ + int ret; + /* + * When AC adaptor is unplugged, the host + * must put LPN high to be able to + * communicate by I2C with PM2301 + * and receive I2C "acknowledge" from PM2301. + */ + mutex_lock(&pm2->lock); + set_lpn_pin(pm2); + + ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg, + 1, &val); + if (ret < 0) + dev_err(pm2->dev, "Error writing register at 0x%x\n", reg); + else + ret = 0; + clear_lpn_pin(pm2); + mutex_unlock(&pm2->lock); + + return ret; +} + +static int pm2xxx_charging_enable_mngt(struct pm2xxx_charger *pm2) +{ + int ret; + + /* Enable charging */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2, + (PM2XXX_CH_AUTO_RESUME_EN | PM2XXX_CHARGER_ENA)); + + return ret; +} + +static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2) +{ + int ret; + + /* Disable charging */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2, + (PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS)); + + return ret; +} + +static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val) +{ + queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work); + + return 0; +} + + +int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val) +{ + queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work); + + return 0; +} + +static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val) +{ + int ret = 0; + + pm2->failure_input_ovv++; + if (pm2->failure_input_ovv < 4) { + ret = pm2xxx_charging_enable_mngt(pm2); + goto out; + } else { + pm2->failure_input_ovv = 0; + dev_err(pm2->dev, "Overvoltage detected\n"); + pm2->flags.ovv = true; + power_supply_changed(&pm2->ac_chg.psy); + } + +out: + return ret; +} + +static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val) +{ + dev_dbg(pm2->dev , "20 minutes watchdog occured\n"); + + pm2->ac.wd_expired = true; + power_supply_changed(&pm2->ac_chg.psy); + + return 0; +} + +static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val) +{ + switch (val) { + case PM2XXX_INT1_ITVBATLOWR: + dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n"); + break; + + case PM2XXX_INT1_ITVBATLOWF: + dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n"); + break; + + default: + dev_err(pm2->dev, "Unknown VBAT level\n"); + } + + return 0; +} + +static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val) +{ + dev_dbg(pm2->dev, "battery disconnected\n"); + + return 0; +} + +static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val) +{ + int ret; + + ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT2, val); + + if (ret < 0) { + dev_err(pm2->dev, "Charger detection failed\n"); + goto out; + } + + *val &= (PM2XXX_INT2_S_ITVPWR1PLUG | PM2XXX_INT2_S_ITVPWR2PLUG); + +out: + return ret; +} + +static int pm2xxx_charger_itv_pwr_plug_mngt(struct pm2xxx_charger *pm2, int val) +{ + + int ret; + u8 read_val; + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if the main charger is + * connected by reading the interrupt source register. + */ + ret = pm2xxx_charger_detection(pm2, &read_val); + + if ((ret == 0) && read_val) { + pm2->ac.charger_connected = 1; + pm2->ac_conn = true; + queue_work(pm2->charger_wq, &pm2->ac_work); + } + + + return ret; +} + +static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2, + int val) +{ + pm2->ac.charger_connected = 0; + queue_work(pm2->charger_wq, &pm2->ac_work); + + return 0; +} + +static int pm2_int_reg0(void *pm2_data, int val) +{ + struct pm2xxx_charger *pm2 = pm2_data; + int ret = 0; + + if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) { + ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val & + (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)); + } + + if (val & PM2XXX_INT1_ITVBATDISCONNECT) { + ret = pm2xxx_charger_bat_disc_mngt(pm2, + PM2XXX_INT1_ITVBATDISCONNECT); + } + + return ret; +} + +static int pm2_int_reg1(void *pm2_data, int val) +{ + struct pm2xxx_charger *pm2 = pm2_data; + int ret = 0; + + if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) { + dev_dbg(pm2->dev , "Main charger plugged\n"); + ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val & + (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)); + } + + if (val & + (PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) { + dev_dbg(pm2->dev , "Main charger unplugged\n"); + ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val & + (PM2XXX_INT2_ITVPWR1UNPLUG | + PM2XXX_INT2_ITVPWR2UNPLUG)); + } + + return ret; +} + +static int pm2_int_reg2(void *pm2_data, int val) +{ + struct pm2xxx_charger *pm2 = pm2_data; + int ret = 0; + + if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD) + ret = pm2xxx_charger_wd_exp_mngt(pm2, val); + + if (val & (PM2XXX_INT3_ITCHPRECHARGEWD | + PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) { + dev_dbg(pm2->dev, + "Watchdog occured for precharge, CC and CV charge\n"); + } + + return ret; +} + +static int pm2_int_reg3(void *pm2_data, int val) +{ + struct pm2xxx_charger *pm2 = pm2_data; + int ret = 0; + + if (val & (PM2XXX_INT4_ITCHARGINGON)) { + dev_dbg(pm2->dev , + "chargind operation has started\n"); + } + + if (val & (PM2XXX_INT4_ITVRESUME)) { + dev_dbg(pm2->dev, + "battery discharged down to VResume threshold\n"); + } + + if (val & (PM2XXX_INT4_ITBATTFULL)) { + dev_dbg(pm2->dev , "battery fully detected\n"); + } + + if (val & (PM2XXX_INT4_ITCVPHASE)) { + dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n"); + } + + if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) { + pm2->failure_case = VPWR_OVV; + ret = pm2xxx_charger_ovv_mngt(pm2, val & + (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)); + dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n"); + } + + if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD | + PM2XXX_INT4_S_ITBATTEMPHOT)) { + ret = pm2xxx_charger_batt_therm_mngt(pm2, val & + (PM2XXX_INT4_S_ITBATTEMPCOLD | + PM2XXX_INT4_S_ITBATTEMPHOT)); + dev_dbg(pm2->dev, "BTEMP is too Low/High\n"); + } + + return ret; +} + +static int pm2_int_reg4(void *pm2_data, int val) +{ + struct pm2xxx_charger *pm2 = pm2_data; + int ret = 0; + + if (val & PM2XXX_INT5_ITVSYSTEMOVV) { + pm2->failure_case = VSYSTEM_OVV; + ret = pm2xxx_charger_ovv_mngt(pm2, val & + PM2XXX_INT5_ITVSYSTEMOVV); + dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n"); + } + + if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL | + PM2XXX_INT5_ITTHERMALWARNINGRISE | + PM2XXX_INT5_ITTHERMALSHUTDOWNFALL | + PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) { + dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n"); + ret = pm2xxx_charger_die_therm_mngt(pm2, val & + (PM2XXX_INT5_ITTHERMALWARNINGFALL | + PM2XXX_INT5_ITTHERMALWARNINGRISE | + PM2XXX_INT5_ITTHERMALSHUTDOWNFALL | + PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)); + } + + return ret; +} + +static int pm2_int_reg5(void *pm2_data, int val) +{ + struct pm2xxx_charger *pm2 = pm2_data; + int ret = 0; + + + if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) { + dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n"); + } + + if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE | + PM2XXX_INT6_ITVPWR1VALIDRISE | + PM2XXX_INT6_ITVPWR2VALIDFALL | + PM2XXX_INT6_ITVPWR1VALIDFALL)) { + dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n"); + } + + return ret; +} + +static irqreturn_t pm2xxx_irq_int(int irq, void *data) +{ + struct pm2xxx_charger *pm2 = data; + struct pm2xxx_interrupts *interrupt = pm2->pm2_int; + int i; + + for (i = 0; i < PM2XXX_NUM_INT_REG; i++) { + pm2xxx_reg_read(pm2, + pm2xxx_interrupt_registers[i], + &(interrupt->reg[i])); + + if (interrupt->reg[i] > 0) + interrupt->handler[i](pm2, interrupt->reg[i]); + } + + return IRQ_HANDLED; +} + +static int pm2xxx_charger_get_ac_cv(struct pm2xxx_charger *pm2) +{ + int ret = 0; + u8 val; + + if (pm2->ac.charger_connected && pm2->ac.charger_online) { + + ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__); + goto out; + } + + if (val & PM2XXX_INT4_S_ITCVPHASE) + ret = PM2XXX_CONST_VOLT; + else + ret = PM2XXX_CONST_CURR; + } +out: + return ret; +} + +static int pm2xxx_current_to_regval(int curr) +{ + int i; + + if (curr < pm2xxx_charger_current_map[0]) + return 0; + + for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_current_map); i++) { + if (curr < pm2xxx_charger_current_map[i]) + return (i - 1); + } + + i = ARRAY_SIZE(pm2xxx_charger_current_map) - 1; + if (curr == pm2xxx_charger_current_map[i]) + return i; + else + return -EINVAL; +} + +static int pm2xxx_voltage_to_regval(int curr) +{ + int i; + + if (curr < pm2xxx_charger_voltage_map[0]) + return 0; + + for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_voltage_map); i++) { + if (curr < pm2xxx_charger_voltage_map[i]) + return i - 1; + } + + i = ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1; + if (curr == pm2xxx_charger_voltage_map[i]) + return i; + else + return -EINVAL; +} + +static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger, + int ich_out) +{ + int ret; + int curr_index; + struct pm2xxx_charger *pm2; + u8 val; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + pm2 = to_pm2xxx_charger_ac_device_info(charger); + else + return -ENXIO; + + curr_index = pm2xxx_current_to_regval(ich_out); + if (curr_index < 0) { + dev_err(pm2->dev, + "Charger current too high, charging not started\n"); + return -ENXIO; + } + + ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val); + if (ret >= 0) { + val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK; + val |= curr_index; + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val); + if (ret < 0) { + dev_err(pm2->dev, + "%s write failed\n", __func__); + } + } + else + dev_err(pm2->dev, "%s read failed\n", __func__); + + return ret; +} + +static int pm2xxx_charger_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pm2xxx_charger *pm2; + + pm2 = to_pm2xxx_charger_ac_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (pm2->flags.mainextchnotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (pm2->ac.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (pm2->flags.main_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = pm2->ac.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = pm2->ac.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + pm2->ac.cv_active = pm2xxx_charger_get_ac_cv(pm2); + val->intval = pm2->ac.cv_active; + break; + default: + return -EINVAL; + } + return 0; +} + +static int pm2xxx_charging_init(struct pm2xxx_charger *pm2) +{ + int ret = 0; + + /* enable CC and CV watchdog */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG3, + (PM2XXX_CH_WD_CV_PHASE_60MIN | PM2XXX_CH_WD_CC_PHASE_60MIN)); + if( ret < 0) + return ret; + + /* enable precharge watchdog */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4, + PM2XXX_CH_WD_PRECH_PHASE_60MIN); + + /* Disable auto timeout */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5, + PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN); + + /* + * EOC current level = 100mA + * Precharge current level = 100mA + * CC current level = 1000mA + */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, + (PM2XXX_DIR_CH_CC_CURRENT_1000MA | + PM2XXX_CH_PRECH_CURRENT_100MA | + PM2XXX_CH_EOC_CURRENT_100MA)); + + /* + * recharge threshold = 3.8V + * Precharge to CC threshold = 2.9V + */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7, + (PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8)); + + /* float voltage charger level = 4.2V */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, + PM2XXX_CH_VOLT_4_2); + + /* Voltage drop between VBAT and VSYS in HW charging = 300mV */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9, + (PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS | + PM2XXX_CH_CC_REDUCED_CURRENT_IDENT | + PM2XXX_CH_CC_MODEDROP_DIS)); + + /* Input charger level of over voltage = 10V */ + ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2, + PM2XXX_VPWR2_OVV_10); + ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1, + PM2XXX_VPWR1_OVV_10); + + /* Input charger drop */ + ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2, + (PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS | + PM2XXX_VPWR2_DROP_DIS)); + ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1, + (PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS | + PM2XXX_VPWR1_DROP_DIS)); + + /* Disable battery low monitoring */ + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG, + PM2XXX_VBAT_LOW_MONITORING_ENA); + + /* Disable LED */ + ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, + PM2XXX_LED_SELECT_DIS); + + return ret; +} + +static int pm2xxx_charger_ac_en(struct ux500_charger *charger, + int enable, int vset, int iset) +{ + int ret; + int volt_index; + int curr_index; + u8 val; + + struct pm2xxx_charger *pm2 = to_pm2xxx_charger_ac_device_info(charger); + + if (enable) { + if (!pm2->ac.charger_connected) { + dev_dbg(pm2->dev, "AC charger not connected\n"); + return -ENXIO; + } + + dev_dbg(pm2->dev, "Enable AC: %dmV %dmA\n", vset, iset); + if (!pm2->vddadc_en_ac) { + regulator_enable(pm2->regu); + pm2->vddadc_en_ac = true; + } + + ret = pm2xxx_charging_init(pm2); + if (ret < 0) { + dev_err(pm2->dev, "%s charging init failed\n", + __func__); + goto error_occured; + } + + volt_index = pm2xxx_voltage_to_regval(vset); + curr_index = pm2xxx_current_to_regval(iset); + + if (volt_index < 0 || curr_index < 0) { + dev_err(pm2->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG8, &val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__); + goto error_occured; + } + val &= ~PM2XXX_CH_VOLT_MASK; + val |= volt_index; + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__); + goto error_occured; + } + + ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__); + goto error_occured; + } + val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK; + val |= curr_index; + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__); + goto error_occured; + } + + if (!pm2->bat->enable_overshoot) { + ret = pm2xxx_reg_read(pm2, PM2XXX_LED_CTRL_REG, &val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx read failed\n", + __func__); + goto error_occured; + } + val |= PM2XXX_ANTI_OVERSHOOT_EN; + ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx write failed\n", + __func__); + goto error_occured; + } + } + + ret = pm2xxx_charging_enable_mngt(pm2); + if (ret < 0) { + dev_err(pm2->dev, "Failed to enable" + "pm2xxx ac charger\n"); + goto error_occured; + } + + pm2->ac.charger_online = 1; + } else { + pm2->ac.charger_online = 0; + pm2->ac.wd_expired = false; + + /* Disable regulator if enabled */ + if (pm2->vddadc_en_ac) { + regulator_disable(pm2->regu); + pm2->vddadc_en_ac = false; + } + + ret = pm2xxx_charging_disable_mngt(pm2); + if (ret < 0) { + dev_err(pm2->dev, "failed to disable" + "pm2xxx ac charger\n"); + goto error_occured; + } + + dev_dbg(pm2->dev, "PM2301: " "Disabled AC charging\n"); + } + power_supply_changed(&pm2->ac_chg.psy); + +error_occured: + return ret; +} + +static int pm2xxx_charger_watchdog_kick(struct ux500_charger *charger) +{ + int ret; + struct pm2xxx_charger *pm2; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + pm2 = to_pm2xxx_charger_ac_device_info(charger); + else + return -ENXIO; + + ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_WD_KICK, WD_TIMER); + if (ret) + dev_err(pm2->dev, "Failed to kick WD!\n"); + + return ret; +} + +static void pm2xxx_charger_ac_work(struct work_struct *work) +{ + struct pm2xxx_charger *pm2 = container_of(work, + struct pm2xxx_charger, ac_work); + + + power_supply_changed(&pm2->ac_chg.psy); + sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present"); +}; + +static void pm2xxx_charger_check_main_thermal_prot_work( + struct work_struct *work) +{ +}; + +static struct pm2xxx_interrupts pm2xxx_int = { + .handler[0] = pm2_int_reg0, + .handler[1] = pm2_int_reg1, + .handler[2] = pm2_int_reg2, + .handler[3] = pm2_int_reg3, + .handler[4] = pm2_int_reg4, + .handler[5] = pm2_int_reg5, +}; + +static struct pm2xxx_irq pm2xxx_charger_irq[] = { + {"PM2XXX_IRQ_INT", pm2xxx_irq_int}, +}; + +static int pm2xxx_wall_charger_resume(struct i2c_client *i2c_client) +{ + return 0; +} + +static int pm2xxx_wall_charger_suspend(struct i2c_client *i2c_client, + pm_message_t state) +{ + return 0; +} + +static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data; + struct pm2xxx_charger *pm2; + int ret = 0; + u8 val; + + pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL); + if (!pm2) { + dev_err(pm2->dev, "pm2xxx_charger allocation failed\n"); + return -ENOMEM; + } + + /* get parent data */ + pm2->dev = &i2c_client->dev; + pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + pm2->pm2_int = &pm2xxx_int; + + /* get charger spcific platform data */ + if (!pl_data->wall_charger) { + dev_err(pm2->dev, "no charger platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + pm2->pdata = pl_data->wall_charger; + + /* get battery specific platform data */ + if (!pl_data->battery) { + dev_err(pm2->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + pm2->bat = pl_data->battery; + + /*get lpn GPIO from platform data*/ + if (!pm2->pdata->lpn_gpio) { + dev_err(pm2->dev, "no lpn gpio data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + pm2->lpn_pin = pm2->pdata->lpn_gpio; + + if (!i2c_check_functionality(i2c_client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_READ_WORD_DATA)) { + ret = -ENODEV; + dev_info(pm2->dev, "pm2301 i2c_check_functionality failed\n"); + goto free_device_info; + } + + pm2->config.pm2xxx_i2c = i2c_client; + pm2->config.pm2xxx_id = (struct i2c_device_id *) id; + i2c_set_clientdata(i2c_client, pm2); + + /* AC supply */ + /* power_supply base class */ + pm2->ac_chg.psy.name = pm2->pdata->label; + pm2->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS; + pm2->ac_chg.psy.properties = pm2xxx_charger_ac_props; + pm2->ac_chg.psy.num_properties = ARRAY_SIZE(pm2xxx_charger_ac_props); + pm2->ac_chg.psy.get_property = pm2xxx_charger_ac_get_property; + pm2->ac_chg.psy.supplied_to = pm2->pdata->supplied_to; + pm2->ac_chg.psy.num_supplicants = pm2->pdata->num_supplicants; + /* pm2xxx_charger sub-class */ + pm2->ac_chg.ops.enable = &pm2xxx_charger_ac_en; + pm2->ac_chg.ops.kick_wd = &pm2xxx_charger_watchdog_kick; + pm2->ac_chg.ops.update_curr = &pm2xxx_charger_update_charger_current; + pm2->ac_chg.max_out_volt = pm2xxx_charger_voltage_map[ + ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1]; + pm2->ac_chg.max_out_curr = pm2xxx_charger_current_map[ + ARRAY_SIZE(pm2xxx_charger_current_map) - 1]; + pm2->ac_chg.wdt_refresh = WD_KICK_INTERVAL; + pm2->ac_chg.enabled = true; + pm2->ac_chg.external = true; + + /* Create a work queue for the charger */ + pm2->charger_wq = + create_singlethread_workqueue("pm2xxx_charger_wq"); + if (pm2->charger_wq == NULL) { + dev_err(pm2->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for charger detection */ + INIT_WORK(&pm2->ac_work, pm2xxx_charger_ac_work); + + /* Init work for checking HW status */ + INIT_WORK(&pm2->check_main_thermal_prot_work, + pm2xxx_charger_check_main_thermal_prot_work); + + /* + * VDD ADC supply needs to be enabled from this driver when there + * is a charger connected to avoid erroneous BTEMP_HIGH/LOW + * interrupts during charging + */ + pm2->regu = regulator_get(pm2->dev, "vddadc"); + if (IS_ERR(pm2->regu)) { + ret = PTR_ERR(pm2->regu); + dev_err(pm2->dev, "failed to get vddadc regulator\n"); + goto free_charger_wq; + } + + /* Register AC charger class */ + ret = power_supply_register(pm2->dev, &pm2->ac_chg.psy); + if (ret) { + dev_err(pm2->dev, "failed to register AC charger\n"); + goto free_regulator; + } + + /* Register interrupts */ + ret = request_threaded_irq(pm2->pdata->irq_number, NULL, + pm2xxx_charger_irq[0].isr, + pm2->pdata->irq_type, + pm2xxx_charger_irq[0].name, pm2); + + if (ret != 0) { + dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n", + pm2xxx_charger_irq[0].name, pm2->pdata->irq_number, ret); + goto unregister_pm2xxx_charger; + } + + /*Initialize lock*/ + mutex_init(&pm2->lock); + + /* + * Charger detection mechanism requires pulling up the LPN pin + * while i2c communication if Charger is not connected + * LPN pin of PM2301 is GPIO60 of AB9540 + */ + ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio"); + if (ret < 0) { + dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n"); + goto unregister_pm2xxx_charger; + } + ret = gpio_direction_output(pm2->lpn_pin, 0); + if (ret < 0) { + dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n"); + goto free_gpio; + } + + ret = pm2xxx_charger_detection(pm2, &val); + + if ((ret == 0) && val) { + pm2->ac.charger_connected = 1; + pm2->ac_conn = true; + power_supply_changed(&pm2->ac_chg.psy); + sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present"); + } + + return 0; + +free_gpio: + gpio_free(pm2->lpn_pin); +unregister_pm2xxx_charger: + /* unregister power supply */ + power_supply_unregister(&pm2->ac_chg.psy); +free_regulator: + /* disable the regulator */ + regulator_put(pm2->regu); +free_charger_wq: + destroy_workqueue(pm2->charger_wq); +free_device_info: + kfree(pm2); + return ret; +} + +static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client) +{ + struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client); + + /* Disable AC charging */ + pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0); + + /* Disable interrupts */ + free_irq(pm2->pdata->irq_number, pm2); + + /* Delete the work queue */ + destroy_workqueue(pm2->charger_wq); + + flush_scheduled_work(); + + /* disable the regulator */ + regulator_put(pm2->regu); + + power_supply_unregister(&pm2->ac_chg.psy); + + /*Free GPIO60*/ + gpio_free(pm2->lpn_pin); + + kfree(pm2); + + return 0; +} + +static const struct i2c_device_id pm2xxx_id[] = { + { "pm2301", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, pm2xxx_id); + +static struct i2c_driver pm2xxx_charger_driver = { + .probe = pm2xxx_wall_charger_probe, + .remove = __devexit_p(pm2xxx_wall_charger_remove), + .suspend = pm2xxx_wall_charger_suspend, + .resume = pm2xxx_wall_charger_resume, + .driver = { + .name = "pm2xxx-wall_charger", + .owner = THIS_MODULE, + }, + .id_table = pm2xxx_id, +}; + +static int __init pm2xxx_charger_init(void) +{ + return i2c_add_driver(&pm2xxx_charger_driver); +} + +static void __exit pm2xxx_charger_exit(void) +{ + i2c_del_driver(&pm2xxx_charger_driver); +} + +subsys_initcall_sync(pm2xxx_charger_init); +module_exit(pm2xxx_charger_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay"); +MODULE_ALIAS("platform:pm2xxx-charger"); +MODULE_DESCRIPTION("PM2xxx charger management driver"); + diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h new file mode 100644 index 000000000000..e6319cdbc94f --- /dev/null +++ b/drivers/power/pm2301_charger.h @@ -0,0 +1,513 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * PM2301 power supply interface + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef PM2301_CHARGER_H +#define PM2301_CHARGER_H + +#define MAIN_WDOG_ENA 0x01 +#define MAIN_WDOG_KICK 0x02 +#define MAIN_WDOG_DIS 0x00 +#define CHARG_WD_KICK 0x01 +#define MAIN_CH_ENA 0x01 +#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 +#define MAIN_CH_DET 0x01 +#define MAIN_CH_CV_ON 0x04 +#define OTP_ENABLE_WD 0x01 + +#define MAIN_CH_INPUT_CURR_SHIFT 4 + +#define LED_INDICATOR_PWM_ENA 0x01 +#define LED_INDICATOR_PWM_DIS 0x00 +#define LED_IND_CUR_5MA 0x04 +#define LED_INDICATOR_PWM_DUTY_252_256 0xBF + +/* HW failure constants */ +#define MAIN_CH_TH_PROT 0x02 +#define MAIN_CH_NOK 0x01 + +/* Watchdog timeout constant */ +#define WD_TIMER 0x30 /* 4min */ +#define WD_KICK_INTERVAL (30 * HZ) + +#define PM2XXX_NUM_INT_REG 0x6 + +/* Constant voltage/current */ +#define PM2XXX_CONST_CURR 0x0 +#define PM2XXX_CONST_VOLT 0x1 + +/* Lowest charger voltage is 3.39V -> 0x4E */ +#define LOW_VOLT_REG 0x4E + +#define PM2XXX_BATT_CTRL_REG1 0x00 +#define PM2XXX_BATT_CTRL_REG2 0x01 +#define PM2XXX_BATT_CTRL_REG3 0x02 +#define PM2XXX_BATT_CTRL_REG4 0x03 +#define PM2XXX_BATT_CTRL_REG5 0x04 +#define PM2XXX_BATT_CTRL_REG6 0x05 +#define PM2XXX_BATT_CTRL_REG7 0x06 +#define PM2XXX_BATT_CTRL_REG8 0x07 +#define PM2XXX_NTC_CTRL_REG1 0x08 +#define PM2XXX_NTC_CTRL_REG2 0x09 +#define PM2XXX_BATT_CTRL_REG9 0x0A +#define PM2XXX_BATT_STAT_REG1 0x0B +#define PM2XXX_INP_VOLT_VPWR2 0x11 +#define PM2XXX_INP_DROP_VPWR2 0x13 +#define PM2XXX_INP_VOLT_VPWR1 0x15 +#define PM2XXX_INP_DROP_VPWR1 0x17 +#define PM2XXX_INP_MODE_VPWR 0x18 +#define PM2XXX_BATT_WD_KICK 0x70 +#define PM2XXX_DEV_VER_STAT 0x0C +#define PM2XXX_THERM_WARN_CTRL_REG 0x20 +#define PM2XXX_BATT_DISC_REG 0x21 +#define PM2XXX_BATT_LOW_LEV_COMP_REG 0x22 +#define PM2XXX_BATT_LOW_LEV_VAL_REG 0x23 +#define PM2XXX_I2C_PAD_CTRL_REG 0x24 +#define PM2XXX_SW_CTRL_REG 0x26 +#define PM2XXX_LED_CTRL_REG 0x28 + +#define PM2XXX_REG_INT1 0x40 +#define PM2XXX_MASK_REG_INT1 0x50 +#define PM2XXX_SRCE_REG_INT1 0x60 +#define PM2XXX_REG_INT2 0x41 +#define PM2XXX_MASK_REG_INT2 0x51 +#define PM2XXX_SRCE_REG_INT2 0x61 +#define PM2XXX_REG_INT3 0x42 +#define PM2XXX_MASK_REG_INT3 0x52 +#define PM2XXX_SRCE_REG_INT3 0x62 +#define PM2XXX_REG_INT4 0x43 +#define PM2XXX_MASK_REG_INT4 0x53 +#define PM2XXX_SRCE_REG_INT4 0x63 +#define PM2XXX_REG_INT5 0x44 +#define PM2XXX_MASK_REG_INT5 0x54 +#define PM2XXX_SRCE_REG_INT5 0x64 +#define PM2XXX_REG_INT6 0x45 +#define PM2XXX_MASK_REG_INT6 0x55 +#define PM2XXX_SRCE_REG_INT6 0x65 + +#define VPWR_OVV 0x0 +#define VSYSTEM_OVV 0x1 + +/* control Reg 1 */ +#define PM2XXX_CH_RESUME_EN 0x1 +#define PM2XXX_CH_RESUME_DIS 0x0 + +/* control Reg 2 */ +#define PM2XXX_CH_AUTO_RESUME_EN 0X2 +#define PM2XXX_CH_AUTO_RESUME_DIS 0X0 +#define PM2XXX_CHARGER_ENA 0x4 +#define PM2XXX_CHARGER_DIS 0x0 + +/* control Reg 3 */ +#define PM2XXX_CH_WD_CC_PHASE_OFF 0x0 +#define PM2XXX_CH_WD_CC_PHASE_5MIN 0x1 +#define PM2XXX_CH_WD_CC_PHASE_10MIN 0x2 +#define PM2XXX_CH_WD_CC_PHASE_30MIN 0x3 +#define PM2XXX_CH_WD_CC_PHASE_60MIN 0x4 +#define PM2XXX_CH_WD_CC_PHASE_120MIN 0x5 +#define PM2XXX_CH_WD_CC_PHASE_240MIN 0x6 +#define PM2XXX_CH_WD_CC_PHASE_360MIN 0x7 + +#define PM2XXX_CH_WD_CV_PHASE_OFF (0x0<<3) +#define PM2XXX_CH_WD_CV_PHASE_5MIN (0x1<<3) +#define PM2XXX_CH_WD_CV_PHASE_10MIN (0x2<<3) +#define PM2XXX_CH_WD_CV_PHASE_30MIN (0x3<<3) +#define PM2XXX_CH_WD_CV_PHASE_60MIN (0x4<<3) +#define PM2XXX_CH_WD_CV_PHASE_120MIN (0x5<<3) +#define PM2XXX_CH_WD_CV_PHASE_240MIN (0x6<<3) +#define PM2XXX_CH_WD_CV_PHASE_360MIN (0x7<<3) + +/* control Reg 4 */ +#define PM2XXX_CH_WD_PRECH_PHASE_OFF 0x0 +#define PM2XXX_CH_WD_PRECH_PHASE_1MIN 0x1 +#define PM2XXX_CH_WD_PRECH_PHASE_5MIN 0x2 +#define PM2XXX_CH_WD_PRECH_PHASE_10MIN 0x3 +#define PM2XXX_CH_WD_PRECH_PHASE_30MIN 0x4 +#define PM2XXX_CH_WD_PRECH_PHASE_60MIN 0x5 +#define PM2XXX_CH_WD_PRECH_PHASE_120MIN 0x6 +#define PM2XXX_CH_WD_PRECH_PHASE_240MIN 0x7 + +/* control Reg 5 */ +#define PM2XXX_CH_WD_AUTO_TIMEOUT_NONE 0x0 +#define PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN 0x1 + +/* control Reg 6 */ +#define PM2XXX_DIR_CH_CC_CURRENT_MASK 0x0F +#define PM2XXX_DIR_CH_CC_CURRENT_200MA 0x0 +#define PM2XXX_DIR_CH_CC_CURRENT_400MA 0x2 +#define PM2XXX_DIR_CH_CC_CURRENT_600MA 0x3 +#define PM2XXX_DIR_CH_CC_CURRENT_800MA 0x4 +#define PM2XXX_DIR_CH_CC_CURRENT_1000MA 0x5 +#define PM2XXX_DIR_CH_CC_CURRENT_1200MA 0x6 +#define PM2XXX_DIR_CH_CC_CURRENT_1400MA 0x7 +#define PM2XXX_DIR_CH_CC_CURRENT_1600MA 0x8 +#define PM2XXX_DIR_CH_CC_CURRENT_1800MA 0x9 +#define PM2XXX_DIR_CH_CC_CURRENT_2000MA 0xA +#define PM2XXX_DIR_CH_CC_CURRENT_2200MA 0xB +#define PM2XXX_DIR_CH_CC_CURRENT_2400MA 0xC +#define PM2XXX_DIR_CH_CC_CURRENT_2600MA 0xD +#define PM2XXX_DIR_CH_CC_CURRENT_2800MA 0xE +#define PM2XXX_DIR_CH_CC_CURRENT_3000MA 0xF + +#define PM2XXX_CH_PRECH_CURRENT_MASK 0x30 +#define PM2XXX_CH_PRECH_CURRENT_25MA (0x0<<4) +#define PM2XXX_CH_PRECH_CURRENT_50MA (0x1<<4) +#define PM2XXX_CH_PRECH_CURRENT_75MA (0x2<<4) +#define PM2XXX_CH_PRECH_CURRENT_100MA (0x3<<4) + +#define PM2XXX_CH_EOC_CURRENT_MASK 0xC0 +#define PM2XXX_CH_EOC_CURRENT_100MA (0x0<<6) +#define PM2XXX_CH_EOC_CURRENT_150MA (0x1<<6) +#define PM2XXX_CH_EOC_CURRENT_300MA (0x2<<6) +#define PM2XXX_CH_EOC_CURRENT_400MA (0x3<<6) + +/* control Reg 7 */ +#define PM2XXX_CH_PRECH_VOL_2_5 0x0 +#define PM2XXX_CH_PRECH_VOL_2_7 0x1 +#define PM2XXX_CH_PRECH_VOL_2_9 0x2 +#define PM2XXX_CH_PRECH_VOL_3_1 0x3 + +#define PM2XXX_CH_VRESUME_VOL_3_2 (0x0<<2) +#define PM2XXX_CH_VRESUME_VOL_3_4 (0x1<<2) +#define PM2XXX_CH_VRESUME_VOL_3_6 (0x2<<2) +#define PM2XXX_CH_VRESUME_VOL_3_8 (0x3<<2) + +/* control Reg 8 */ +#define PM2XXX_CH_VOLT_MASK 0x3F +#define PM2XXX_CH_VOLT_3_5 0x0 +#define PM2XXX_CH_VOLT_3_5225 0x1 +#define PM2XXX_CH_VOLT_3_6 0x4 +#define PM2XXX_CH_VOLT_3_7 0x8 +#define PM2XXX_CH_VOLT_4_0 0x14 +#define PM2XXX_CH_VOLT_4_175 0x1B +#define PM2XXX_CH_VOLT_4_2 0x1C +#define PM2XXX_CH_VOLT_4_275 0x1F +#define PM2XXX_CH_VOLT_4_3 0x20 + +/*NTC control register 1*/ +#define PM2XXX_BTEMP_HIGH_TH_45 0x0 +#define PM2XXX_BTEMP_HIGH_TH_50 0x1 +#define PM2XXX_BTEMP_HIGH_TH_55 0x2 +#define PM2XXX_BTEMP_HIGH_TH_60 0x3 +#define PM2XXX_BTEMP_HIGH_TH_65 0x4 + +#define PM2XXX_BTEMP_LOW_TH_N5 (0x0<<3) +#define PM2XXX_BTEMP_LOW_TH_0 (0x1<<3) +#define PM2XXX_BTEMP_LOW_TH_5 (0x2<<3) +#define PM2XXX_BTEMP_LOW_TH_10 (0x3<<3) + +/*NTC control register 2*/ +#define PM2XXX_NTC_BETA_COEFF_3477 0x0 +#define PM2XXX_NTC_BETA_COEFF_3964 0x1 + +#define PM2XXX_NTC_RES_10K (0x0<<2) +#define PM2XXX_NTC_RES_47K (0x1<<2) +#define PM2XXX_NTC_RES_100K (0x2<<2) +#define PM2XXX_NTC_RES_NO_NTC (0x3<<2) + +/* control Reg 9 */ +#define PM2XXX_CH_CC_MODEDROP_EN 1 +#define PM2XXX_CH_CC_MODEDROP_DIS 0 + +#define PM2XXX_CH_CC_REDUCED_CURRENT_100MA (0x0<<1) +#define PM2XXX_CH_CC_REDUCED_CURRENT_200MA (0x1<<1) +#define PM2XXX_CH_CC_REDUCED_CURRENT_400MA (0x2<<1) +#define PM2XXX_CH_CC_REDUCED_CURRENT_IDENT (0x3<<1) + +#define PM2XXX_CHARCHING_INFO_DIS (0<<3) +#define PM2XXX_CHARCHING_INFO_EN (1<<3) + +#define PM2XXX_CH_150MV_DROP_300MV (0<<4) +#define PM2XXX_CH_150MV_DROP_150MV (1<<4) + + +/* charger status register */ +#define PM2XXX_CHG_STATUS_OFF 0x0 +#define PM2XXX_CHG_STATUS_ON 0x1 +#define PM2XXX_CHG_STATUS_FULL 0x2 +#define PM2XXX_CHG_STATUS_ERR 0x3 +#define PM2XXX_CHG_STATUS_WAIT 0x4 +#define PM2XXX_CHG_STATUS_NOBAT 0x5 + +/* Input charger voltage VPWR2 */ +#define PM2XXX_VPWR2_OVV_6_0 0x0 +#define PM2XXX_VPWR2_OVV_6_3 0x1 +#define PM2XXX_VPWR2_OVV_10 0x2 +#define PM2XXX_VPWR2_OVV_NONE 0x3 + +/* Input charger drop VPWR2 */ +#define PM2XXX_VPWR2_HW_OPT_EN (0x1<<4) +#define PM2XXX_VPWR2_HW_OPT_DIS (0x0<<4) + +#define PM2XXX_VPWR2_VALID_EN (0x1<<3) +#define PM2XXX_VPWR2_VALID_DIS (0x0<<3) + +#define PM2XXX_VPWR2_DROP_EN (0x1<<2) +#define PM2XXX_VPWR2_DROP_DIS (0x0<<2) + +/* Input charger voltage VPWR1 */ +#define PM2XXX_VPWR1_OVV_6_0 0x0 +#define PM2XXX_VPWR1_OVV_6_3 0x1 +#define PM2XXX_VPWR1_OVV_10 0x2 +#define PM2XXX_VPWR1_OVV_NONE 0x3 + +/* Input charger drop VPWR1 */ +#define PM2XXX_VPWR1_HW_OPT_EN (0x1<<4) +#define PM2XXX_VPWR1_HW_OPT_DIS (0x0<<4) + +#define PM2XXX_VPWR1_VALID_EN (0x1<<3) +#define PM2XXX_VPWR1_VALID_DIS (0x0<<3) + +#define PM2XXX_VPWR1_DROP_EN (0x1<<2) +#define PM2XXX_VPWR1_DROP_DIS (0x0<<2) + +/* Battery low level comparator control register */ +#define PM2XXX_VBAT_LOW_MONITORING_DIS 0x0 +#define PM2XXX_VBAT_LOW_MONITORING_ENA 0x1 + +/* Battery low level value control register */ +#define PM2XXX_VBAT_LOW_LEVEL_2_3 0x0 +#define PM2XXX_VBAT_LOW_LEVEL_2_4 0x1 +#define PM2XXX_VBAT_LOW_LEVEL_2_5 0x2 +#define PM2XXX_VBAT_LOW_LEVEL_2_6 0x3 +#define PM2XXX_VBAT_LOW_LEVEL_2_7 0x4 +#define PM2XXX_VBAT_LOW_LEVEL_2_8 0x5 +#define PM2XXX_VBAT_LOW_LEVEL_2_9 0x6 +#define PM2XXX_VBAT_LOW_LEVEL_3_0 0x7 +#define PM2XXX_VBAT_LOW_LEVEL_3_1 0x8 +#define PM2XXX_VBAT_LOW_LEVEL_3_2 0x9 +#define PM2XXX_VBAT_LOW_LEVEL_3_3 0xA +#define PM2XXX_VBAT_LOW_LEVEL_3_4 0xB +#define PM2XXX_VBAT_LOW_LEVEL_3_5 0xC +#define PM2XXX_VBAT_LOW_LEVEL_3_6 0xD +#define PM2XXX_VBAT_LOW_LEVEL_3_7 0xE +#define PM2XXX_VBAT_LOW_LEVEL_3_8 0xF +#define PM2XXX_VBAT_LOW_LEVEL_3_9 0x10 +#define PM2XXX_VBAT_LOW_LEVEL_4_0 0x11 +#define PM2XXX_VBAT_LOW_LEVEL_4_1 0x12 +#define PM2XXX_VBAT_LOW_LEVEL_4_2 0x13 + +/* SW CTRL */ +#define PM2XXX_SWCTRL_HW 0x0 +#define PM2XXX_SWCTRL_SW 0x1 + + +/* LED Driver Control */ +#define PM2XXX_LED_CURRENT_MASK 0x0C +#define PM2XXX_LED_CURRENT_2_5MA (0X0<<2) +#define PM2XXX_LED_CURRENT_1MA (0X1<<2) +#define PM2XXX_LED_CURRENT_5MA (0X2<<2) +#define PM2XXX_LED_CURRENT_10MA (0X3<<2) + +#define PM2XXX_LED_SELECT_MASK 0x02 +#define PM2XXX_LED_SELECT_EN (0X0<<1) +#define PM2XXX_LED_SELECT_DIS (0X1<<1) + +#define PM2XXX_ANTI_OVERSHOOT_MASK 0x01 +#define PM2XXX_ANTI_OVERSHOOT_DIS 0X0 +#define PM2XXX_ANTI_OVERSHOOT_EN 0X1 + +enum pm2xxx_reg_int1 { + PM2XXX_INT1_ITVBATDISCONNECT = 0x02, + PM2XXX_INT1_ITVBATLOWR = 0x04, + PM2XXX_INT1_ITVBATLOWF = 0x08, +}; + +enum pm2xxx_mask_reg_int1 { + PM2XXX_INT1_M_ITVBATDISCONNECT = 0x02, + PM2XXX_INT1_M_ITVBATLOWR = 0x04, + PM2XXX_INT1_M_ITVBATLOWF = 0x08, +}; + +enum pm2xxx_source_reg_int1 { + PM2XXX_INT1_S_ITVBATDISCONNECT = 0x02, + PM2XXX_INT1_S_ITVBATLOWR = 0x04, + PM2XXX_INT1_S_ITVBATLOWF = 0x08, +}; + +enum pm2xxx_reg_int2 { + PM2XXX_INT2_ITVPWR2PLUG = 0x01, + PM2XXX_INT2_ITVPWR2UNPLUG = 0x02, + PM2XXX_INT2_ITVPWR1PLUG = 0x04, + PM2XXX_INT2_ITVPWR1UNPLUG = 0x08, +}; + +enum pm2xxx_mask_reg_int2 { + PM2XXX_INT2_M_ITVPWR2PLUG = 0x01, + PM2XXX_INT2_M_ITVPWR2UNPLUG = 0x02, + PM2XXX_INT2_M_ITVPWR1PLUG = 0x04, + PM2XXX_INT2_M_ITVPWR1UNPLUG = 0x08, +}; + +enum pm2xxx_source_reg_int2 { + PM2XXX_INT2_S_ITVPWR2PLUG = 0x03, + PM2XXX_INT2_S_ITVPWR1PLUG = 0x0c, +}; + +enum pm2xxx_reg_int3 { + PM2XXX_INT3_ITCHPRECHARGEWD = 0x01, + PM2XXX_INT3_ITCHCCWD = 0x02, + PM2XXX_INT3_ITCHCVWD = 0x04, + PM2XXX_INT3_ITAUTOTIMEOUTWD = 0x08, +}; + +enum pm2xxx_mask_reg_int3 { + PM2XXX_INT3_M_ITCHPRECHARGEWD = 0x01, + PM2XXX_INT3_M_ITCHCCWD = 0x02, + PM2XXX_INT3_M_ITCHCVWD = 0x04, + PM2XXX_INT3_M_ITAUTOTIMEOUTWD = 0x08, +}; + +enum pm2xxx_source_reg_int3 { + PM2XXX_INT3_S_ITCHPRECHARGEWD = 0x01, + PM2XXX_INT3_S_ITCHCCWD = 0x02, + PM2XXX_INT3_S_ITCHCVWD = 0x04, + PM2XXX_INT3_S_ITAUTOTIMEOUTWD = 0x08, +}; + +enum pm2xxx_reg_int4 { + PM2XXX_INT4_ITBATTEMPCOLD = 0x01, + PM2XXX_INT4_ITBATTEMPHOT = 0x02, + PM2XXX_INT4_ITVPWR2OVV = 0x04, + PM2XXX_INT4_ITVPWR1OVV = 0x08, + PM2XXX_INT4_ITCHARGINGON = 0x10, + PM2XXX_INT4_ITVRESUME = 0x20, + PM2XXX_INT4_ITBATTFULL = 0x40, + PM2XXX_INT4_ITCVPHASE = 0x80, +}; + +enum pm2xxx_mask_reg_int4 { + PM2XXX_INT4_M_ITBATTEMPCOLD = 0x01, + PM2XXX_INT4_M_ITBATTEMPHOT = 0x02, + PM2XXX_INT4_M_ITVPWR2OVV = 0x04, + PM2XXX_INT4_M_ITVPWR1OVV = 0x08, + PM2XXX_INT4_M_ITCHARGINGON = 0x10, + PM2XXX_INT4_M_ITVRESUME = 0x20, + PM2XXX_INT4_M_ITBATTFULL = 0x40, + PM2XXX_INT4_M_ITCVPHASE = 0x80, +}; + +enum pm2xxx_source_reg_int4 { + PM2XXX_INT4_S_ITBATTEMPCOLD = 0x01, + PM2XXX_INT4_S_ITBATTEMPHOT = 0x02, + PM2XXX_INT4_S_ITVPWR2OVV = 0x04, + PM2XXX_INT4_S_ITVPWR1OVV = 0x08, + PM2XXX_INT4_S_ITCHARGINGON = 0x10, + PM2XXX_INT4_S_ITVRESUME = 0x20, + PM2XXX_INT4_S_ITBATTFULL = 0x40, + PM2XXX_INT4_S_ITCVPHASE = 0x80, +}; + +enum pm2xxx_reg_int5 { + PM2XXX_INT5_ITTHERMALSHUTDOWNRISE = 0x01, + PM2XXX_INT5_ITTHERMALSHUTDOWNFALL = 0x02, + PM2XXX_INT5_ITTHERMALWARNINGRISE = 0x04, + PM2XXX_INT5_ITTHERMALWARNINGFALL = 0x08, + PM2XXX_INT5_ITVSYSTEMOVV = 0x10, +}; + +enum pm2xxx_mask_reg_int5 { + PM2XXX_INT5_M_ITTHERMALSHUTDOWNRISE = 0x01, + PM2XXX_INT5_M_ITTHERMALSHUTDOWNFALL = 0x02, + PM2XXX_INT5_M_ITTHERMALWARNINGRISE = 0x04, + PM2XXX_INT5_M_ITTHERMALWARNINGFALL = 0x08, + PM2XXX_INT5_M_ITVSYSTEMOVV = 0x10, +}; + +enum pm2xxx_source_reg_int5 { + PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE = 0x01, + PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL = 0x02, + PM2XXX_INT5_S_ITTHERMALWARNINGRISE = 0x04, + PM2XXX_INT5_S_ITTHERMALWARNINGFALL = 0x08, + PM2XXX_INT5_S_ITVSYSTEMOVV = 0x10, +}; + +enum pm2xxx_reg_int6 { + PM2XXX_INT6_ITVPWR2DROP = 0x01, + PM2XXX_INT6_ITVPWR1DROP = 0x02, + PM2XXX_INT6_ITVPWR2VALIDRISE = 0x04, + PM2XXX_INT6_ITVPWR2VALIDFALL = 0x08, + PM2XXX_INT6_ITVPWR1VALIDRISE = 0x10, + PM2XXX_INT6_ITVPWR1VALIDFALL = 0x20, +}; + +enum pm2xxx_mask_reg_int6 { + PM2XXX_INT6_M_ITVPWR2DROP = 0x01, + PM2XXX_INT6_M_ITVPWR1DROP = 0x02, + PM2XXX_INT6_M_ITVPWR2VALIDRISE = 0x04, + PM2XXX_INT6_M_ITVPWR2VALIDFALL = 0x08, + PM2XXX_INT6_M_ITVPWR1VALIDRISE = 0x10, + PM2XXX_INT6_M_ITVPWR1VALIDFALL = 0x20, +}; + +enum pm2xxx_source_reg_int6 { + PM2XXX_INT6_S_ITVPWR2DROP = 0x01, + PM2XXX_INT6_S_ITVPWR1DROP = 0x02, + PM2XXX_INT6_S_ITVPWR2VALIDRISE = 0x04, + PM2XXX_INT6_S_ITVPWR2VALIDFALL = 0x08, + PM2XXX_INT6_S_ITVPWR1VALIDRISE = 0x10, + PM2XXX_INT6_S_ITVPWR1VALIDFALL = 0x20, +}; + +struct pm2xxx_charger_info { + int charger_connected; + int charger_online; + int cv_active; + bool wd_expired; +}; + +struct pm2xxx_charger_event_flags { + bool mainextchnotok; + bool main_thermal_prot; + bool ovv; + bool chgwdexp; +}; + +struct pm2xxx_interrupts { + u8 reg[PM2XXX_NUM_INT_REG]; + int (*handler[PM2XXX_NUM_INT_REG])(void *, int); +}; + +struct pm2xxx_config { + struct i2c_client *pm2xxx_i2c; + struct i2c_device_id *pm2xxx_id; +}; + +struct pm2xxx_irq { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct pm2xxx_charger { + struct device *dev; + u8 chip_id; + bool vddadc_en_ac; + struct pm2xxx_config config; + bool ac_conn; + unsigned int gpio_irq; + int vbat; + int old_vbat; + int failure_case; + int failure_input_ovv; + unsigned int lpn_pin; + struct pm2xxx_interrupts *pm2_int; + struct ab8500_gpadc *gpadc; + struct regulator *regu; + struct pm2xxx_bm_data *bat; + struct mutex lock; + struct ab8500 *parent; + struct pm2xxx_charger_info ac; + struct pm2xxx_charger_platform_data *pdata; + struct workqueue_struct *charger_wq; + struct delayed_work check_vbat_work; + struct work_struct ac_work; + struct work_struct check_main_thermal_prot_work; + struct ux500_charger ac_chg; + struct pm2xxx_charger_event_flags flags; +}; + +#endif /* PM2301_CHARGER_H */ diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 40fa3b7cae54..29178f78d73c 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -55,7 +55,8 @@ static ssize_t power_supply_show_property(struct device *dev, }; static char *health_text[] = { "Unknown", "Good", "Overheat", "Dead", "Over voltage", - "Unspecified failure", "Cold", + "Unspecified failure", "Cold", "Watchdog timer expire", + "Safety timer expire" }; static char *technology_text[] = { "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 6461b489fb09..1ae65b822864 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -13,3 +13,20 @@ config POWER_RESET_GPIO This driver supports turning off your board via a GPIO line. If your board needs a GPIO high/low to power down, say Y and create a binding in your devicetree. + +config POWER_RESET_QNAP + bool "QNAP power-off driver" + depends on OF_GPIO && POWER_RESET && PLAT_ORION + help + This driver supports turning off QNAP NAS devices by sending + commands to the microcontroller which controls the main power. + + Say Y if you have a QNAP NAS. + +config POWER_RESET_RESTART + bool "Restart power-off driver" + depends on ARM + help + Some boards don't actually have the ability to power off. + Instead they restart, and u-boot holds the SoC until the + user presses a key. u-boot then boots into Linux. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 751488a4a0c5..0f317f50c56f 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o +obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o +obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
\ No newline at end of file diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c new file mode 100644 index 000000000000..37f56f7ee926 --- /dev/null +++ b/drivers/power/reset/qnap-poweroff.c @@ -0,0 +1,116 @@ +/* + * QNAP Turbo NAS Board power off + * + * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch> + * + * Based on the code from: + * + * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/serial_reg.h> +#include <linux/kallsyms.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/clk.h> + +#define UART1_REG(x) (base + ((UART_##x) << 2)) + +static void __iomem *base; +static unsigned long tclk; + +static void qnap_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200)); + + pr_err("%s: triggering power-off...\n", __func__); + + /* hijack UART1 and reset into sane state (19200,8n1) */ + writel(0x83, UART1_REG(LCR)); + writel(divisor & 0xff, UART1_REG(DLL)); + writel((divisor >> 8) & 0xff, UART1_REG(DLM)); + writel(0x03, UART1_REG(LCR)); + writel(0x00, UART1_REG(IER)); + writel(0x00, UART1_REG(FCR)); + writel(0x00, UART1_REG(MCR)); + + /* send the power-off command 'A' to PIC */ + writel('A', UART1_REG(TX)); +} + +static int qnap_power_off_probe(struct platform_device *pdev) +{ + struct resource *res; + struct clk *clk; + char symname[KSYM_NAME_LEN]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing resource"); + return -EINVAL; + } + + base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "Unable to map resource"); + return -EINVAL; + } + + /* We need to know tclk in order to calculate the UART divisor */ + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Clk missing"); + return PTR_ERR(clk); + } + + tclk = clk_get_rate(clk); + + /* Check that nothing else has already setup a handler */ + if (pm_power_off) { + lookup_symbol_name((ulong)pm_power_off, symname); + dev_err(&pdev->dev, + "pm_power_off already claimed %p %s", + pm_power_off, symname); + return -EBUSY; + } + pm_power_off = qnap_power_off; + + return 0; +} + +static int qnap_power_off_remove(struct platform_device *pdev) +{ + pm_power_off = NULL; + return 0; +} + +static const struct of_device_id qnap_power_off_of_match_table[] = { + { .compatible = "qnap,power-off", }, + {} +}; +MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); + +static struct platform_driver qnap_power_off_driver = { + .probe = qnap_power_off_probe, + .remove = qnap_power_off_remove, + .driver = { + .owner = THIS_MODULE, + .name = "qnap_power_off", + .of_match_table = of_match_ptr(qnap_power_off_of_match_table), + }, +}; +module_platform_driver(qnap_power_off_driver); + +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); +MODULE_DESCRIPTION("QNAP Power off driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/reset/restart-poweroff.c b/drivers/power/reset/restart-poweroff.c new file mode 100644 index 000000000000..059cd1501e2a --- /dev/null +++ b/drivers/power/reset/restart-poweroff.c @@ -0,0 +1,65 @@ +/* + * Power off by restarting and let u-boot keep hold of the machine + * until the user presses a button for example. + * + * Andrew Lunn <andrew@lunn.ch> + * + * Copyright (C) 2012 Andrew Lunn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/module.h> +#include <asm/system_misc.h> + +static void restart_poweroff_do_poweroff(void) +{ + arm_pm_restart('h', NULL); +} + +static int restart_poweroff_probe(struct platform_device *pdev) +{ + /* If a pm_power_off function has already been added, leave it alone */ + if (pm_power_off != NULL) { + dev_err(&pdev->dev, + "pm_power_off function already registered"); + return -EBUSY; + } + + pm_power_off = &restart_poweroff_do_poweroff; + return 0; +} + +static int restart_poweroff_remove(struct platform_device *pdev) +{ + if (pm_power_off == &restart_poweroff_do_poweroff) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id of_restart_poweroff_match[] = { + { .compatible = "restart-poweroff", }, + {}, +}; + +static struct platform_driver restart_poweroff_driver = { + .probe = restart_poweroff_probe, + .remove = restart_poweroff_remove, + .driver = { + .name = "poweroff-restart", + .owner = THIS_MODULE, + .of_match_table = of_restart_poweroff_match, + }, +}; +module_platform_driver(restart_poweroff_driver); + +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch"); +MODULE_DESCRIPTION("restart poweroff driver"); +MODULE_LICENSE("GPLv2"); +MODULE_ALIAS("platform:poweroff-restart"); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index e53dcfeaee69..80e3b8683a84 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -131,7 +131,7 @@ struct abx500_maxim_parameters { * @nominal_voltage: Nominal voltage of the battery in mV * @termination_vol: max voltage upto which battery can be charged * @termination_curr battery charging termination current in mA - * @recharge_vol battery voltage limit that will trigger a new + * @recharge_cap battery capacity limit that will trigger a new * full charging cycle in the case where maintenan- * -ce charging has been disabled * @normal_cur_lvl: charger current in normal state in mA @@ -160,7 +160,7 @@ struct abx500_battery_type { int nominal_voltage; int termination_vol; int termination_curr; - int recharge_vol; + int recharge_cap; int normal_cur_lvl; int normal_vol_lvl; int maint_a_cur_lvl; @@ -224,6 +224,7 @@ struct abx500_bm_charger_parameters { * @bkup_bat_v voltage which we charge the backup battery with * @bkup_bat_i current which we charge the backup battery with * @no_maintenance indicates that maintenance charging is disabled + * @capacity_scaling indicates whether capacity scaling is to be used * @abx500_adc_therm placement of thermistor, batctrl or battemp adc * @chg_unknown_bat flag to enable charging of unknown batteries * @enable_overshoot flag to enable VBAT overshoot control @@ -253,7 +254,11 @@ struct abx500_bm_data { int usb_safety_tmr_h; int bkup_bat_v; int bkup_bat_i; + bool autopower_cfg; + bool ac_enabled; + bool usb_enabled; bool no_maintenance; + bool capacity_scaling; bool chg_unknown_bat; bool enable_overshoot; bool auto_trig; @@ -277,9 +282,9 @@ enum { NTC_INTERNAL, }; -int bmdevs_of_probe(struct device *dev, - struct device_node *np, - struct abx500_bm_data **battery); +int ab8500_bm_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_data *bm); int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 9bd037df97d9..8d35bfe164c8 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -23,6 +23,7 @@ * Bank : 0x5 */ #define AB8500_USB_LINE_STAT_REG 0x80 +#define AB8500_USB_LINK1_STAT_REG 0x94 /* * Charger / status register offfsets @@ -225,6 +226,8 @@ /* BatCtrl Current Source Constants */ #define BAT_CTRL_7U_ENA 0x01 #define BAT_CTRL_20U_ENA 0x02 +#define BAT_CTRL_18U_ENA 0x01 +#define BAT_CTRL_16U_ENA 0x02 #define BAT_CTRL_CMP_ENA 0x04 #define FORCE_BAT_CTRL_CMP_HIGH 0x08 #define BAT_CTRL_PULL_UP_ENA 0x10 @@ -355,6 +358,7 @@ struct ab8500_bm_charger_parameters { * @bkup_bat_v voltage which we charge the backup battery with * @bkup_bat_i current which we charge the backup battery with * @no_maintenance indicates that maintenance charging is disabled + * @capacity_scaling indicates whether capacity scaling is to be used * @adc_therm placement of thermistor, batctrl or battemp adc * @chg_unknown_bat flag to enable charging of unknown batteries * @enable_overshoot flag to enable VBAT overshoot control @@ -383,6 +387,7 @@ struct ab8500_bm_data { int bkup_bat_v; int bkup_bat_i; bool no_maintenance; + bool capacity_scaling; bool chg_unknown_bat; bool enable_overshoot; enum abx500_adc_therm adc_therm; @@ -399,26 +404,6 @@ struct ab8500_bm_data { const struct ab8500_fg_parameters *fg_params; }; -struct ab8500_charger_platform_data { - char **supplied_to; - size_t num_supplicants; - bool autopower_cfg; -}; - -struct ab8500_btemp_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct ab8500_fg_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct ab8500_chargalg_platform_data { - char **supplied_to; - size_t num_supplicants; -}; struct ab8500_btemp; struct ab8500_gpadc; struct ab8500_fg; @@ -434,20 +419,10 @@ struct ab8500_fg *ab8500_fg_get(void); int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); int ab8500_fg_inst_curr_start(struct ab8500_fg *di); int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); +int ab8500_fg_inst_curr_started(struct ab8500_fg *di); int ab8500_fg_inst_curr_done(struct ab8500_fg *di); #else static struct abx500_bm_data ab8500_bm_data; - -static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di) -{ - return -ENODEV; -} - -static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) -{ - return -ENODEV; -} - #endif #endif /* _AB8500_BM_H */ diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h index 9b07725750c9..d43ac0f35526 100644 --- a/include/linux/mfd/abx500/ux500_chargalg.h +++ b/include/linux/mfd/abx500/ux500_chargalg.h @@ -27,12 +27,17 @@ struct ux500_charger_ops { * @ops ux500 charger operations * @max_out_volt maximum output charger voltage in mV * @max_out_curr maximum output charger current in mA + * @enabled indicates if this charger is used or not + * @external external charger unit (pm2xxx) */ struct ux500_charger { struct power_supply psy; struct ux500_charger_ops ops; int max_out_volt; int max_out_curr; + int wdt_refresh; + bool enabled; + bool external; }; #endif diff --git a/include/linux/pm2301_charger.h b/include/linux/pm2301_charger.h new file mode 100644 index 000000000000..fc3f026922ae --- /dev/null +++ b/include/linux/pm2301_charger.h @@ -0,0 +1,61 @@ +/* + * PM2301 charger driver. + * + * Copyright (C) 2012 ST Ericsson Corporation + * + * Contact: Olivier LAUNAY (olivier.launay@stericsson.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_PM2301_H +#define __LINUX_PM2301_H + +/** + * struct pm2xxx_bm_charger_parameters - Charger specific parameters + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct pm2xxx_bm_charger_parameters { + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct pm2xxx_bm_data - pm2xxx battery management data + * @enable_overshoot flag to enable VBAT overshoot control + * @chg_params charger parameters + */ +struct pm2xxx_bm_data { + bool enable_overshoot; + const struct pm2xxx_bm_charger_parameters *chg_params; +}; + +struct pm2xxx_charger_platform_data { + char **supplied_to; + size_t num_supplicants; + int i2c_bus; + const char *label; + int irq_number; + unsigned int lpn_gpio; + int irq_type; +}; + +struct pm2xxx_platform_data { + struct pm2xxx_charger_platform_data *wall_charger; + struct pm2xxx_bm_data *battery; +}; + +#endif /* __LINUX_PM2301_H */ diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h index 97a1665eaeaf..8dcc0f46fc0a 100644 --- a/include/linux/power/bq2415x_charger.h +++ b/include/linux/power/bq2415x_charger.h @@ -75,7 +75,8 @@ /* Supported modes with maximal current limit */ enum bq2415x_mode { - BQ2415X_MODE_NONE, /* unknown or no charger (100mA) */ + BQ2415X_MODE_OFF, /* offline mode (charger disabled) */ + BQ2415X_MODE_NONE, /* unknown charger (100mA) */ BQ2415X_MODE_HOST_CHARGER, /* usb host/hub charger (500mA) */ BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */ BQ2415X_MODE_BOOST, /* boost mode (charging disabled) */ diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 1f0ab90aff00..25c0982eb9b1 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -54,6 +54,8 @@ enum { POWER_SUPPLY_HEALTH_OVERVOLTAGE, POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, POWER_SUPPLY_HEALTH_COLD, + POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE, + POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE, }; enum { |