diff options
44 files changed, 3229 insertions, 109 deletions
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt new file mode 100644 index 000000000000..42c6fa6f1c9a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/da9063.txt @@ -0,0 +1,93 @@ +* Dialog DA9063 Power Management Integrated Circuit (PMIC) + +DA9093 consists of a large and varied group of sub-devices (I2C Only): + +Device Supply Names Description +------ ------------ ----------- +da9063-regulator : : LDOs & BUCKs +da9063-rtc : : Real-Time Clock +da9063-watchdog : : Watchdog + +====== + +Required properties: + +- compatible : Should be "dlg,da9063" +- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be + modified to match the chip's OTP settings). +- interrupt-parent : Specifies the reference to the interrupt controller for + the DA9063. +- interrupts : IRQ line information. +- interrupt-controller + +Sub-nodes: + +- regulators : This node defines the settings for the LDOs and BUCKs. The + DA9063 regulators are bound using their names listed below: + + bcore1 : BUCK CORE1 + bcore2 : BUCK CORE2 + bpro : BUCK PRO + bmem : BUCK MEM + bio : BUCK IO + bperi : BUCK PERI + ldo1 : LDO_1 + ldo2 : LDO_2 + ldo3 : LDO_3 + ldo4 : LDO_4 + ldo5 : LDO_5 + ldo6 : LDO_6 + ldo7 : LDO_7 + ldo8 : LDO_8 + ldo9 : LDO_9 + ldo10 : LDO_10 + ldo11 : LDO_11 + + The component follows the standard regulator framework and the bindings + details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +- rtc : This node defines settings for the Real-Time Clock associated with + the DA9063. There are currently no entries in this binding, however + compatible = "dlg,da9063-rtc" should be added if a node is created. + +- watchdog : This node defines settings for the Watchdog timer associated + with the DA9063. There are currently no entries in this binding, however + compatible = "dlg,da9063-watchdog" should be added if a node is created. + + +Example: + + pmic0: da9063@58 { + compatible = "dlg,da9063" + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + + regulators { + DA9063_BCORE1: bcore1 { + regulator-name = "BCORE1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + DA9063_LDO11: ldo11 { + regulator-name = "LDO_11"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt new file mode 100644 index 000000000000..85e31980017a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -0,0 +1,70 @@ +Qualcomm Resource Power Manager (RPM) + +This driver is used to interface with the Resource Power Manager (RPM) found in +various Qualcomm platforms. The RPM allows each component in the system to vote +for state of the system resources, such as clocks, regulators and bus +frequencies. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,rpm-apq8064" + "qcom,rpm-msm8660" + "qcom,rpm-msm8960" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: base address and size of the RPM's message ram + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: three entries specifying the RPM's: + 1. acknowledgement interrupt + 2. error interrupt + 3. wakeup interrupt + +- interrupt-names: + Usage: required + Value type: <string-array> + Definition: must be the three strings "ack", "err" and "wakeup", in order + +- #address-cells: + Usage: required + Value type: <u32> + Definition: must be 1 + +- #size-cells: + Usage: required + Value type: <u32> + Definition: must be 0 + +- qcom,ipc: + Usage: required + Value type: <prop-encoded-array> + + Definition: three entries specifying the outgoing ipc bit used for + signaling the RPM: + - phandle to a syscon node representing the apcs registers + - u32 representing offset to the register within the syscon + - u32 representing the ipc bit within the register + + += EXAMPLE + + #include <dt-bindings/mfd/qcom-rpm.h> + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&apcs 0x8 2>; + + interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupt-names = "ack", "err", "wakeup"; + + #address-cells = <1>; + #size-cells = <0>; + }; + diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 3a2604580164..d2a85cde68da 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -1111,7 +1111,7 @@ static int verify_addr(struct i2c_client *i2c) return 0; } -static struct regmap_config pm860x_regmap_config = { +static const struct regmap_config pm860x_regmap_config = { .reg_bits = 8, .val_bits = 8, }; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2e6b7311fabc..38356e39adba 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -195,6 +195,18 @@ config MFD_DA9063 Additional drivers must be enabled in order to use the functionality of the device. +config MFD_DA9150 + tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + help + This adds support for the DA9150 integrated charger and fuel-gauge + chip. This driver provides common support for accessing the device. + Additional drivers must be enabled in order to use the specific + features of the device. + config MFD_DLN2 tristate "Diolan DLN2 support" select MFD_CORE @@ -417,6 +429,7 @@ config MFD_MAX14577 config MFD_MAX77686 bool "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C=y + depends on OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -589,6 +602,20 @@ config MFD_PM8921_CORE Say M here if you want to include support for PM8921 chip as a module. This will build a module called "pm8921-core". +config MFD_QCOM_RPM + tristate "Qualcomm Resource Power Manager (RPM)" + depends on ARCH_QCOM && OF + help + If you say yes to this option, support will be included for the + Resource Power Manager system found in the Qualcomm 8660, 8960 and + 8064 based devices. + + This is required to access many regulators, clocks and bus + frequencies controlled by the RPM on these devices. + + Say M here if you want to include support for the Qualcomm RPM as a + module. This will build a module called "qcom_rpm". + config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST @@ -623,6 +650,18 @@ config MFD_RTSX_PCI types of memory cards, such as Memory Stick, Memory Stick Pro, Secure Digital and MultiMediaCard. +config MFD_RT5033 + tristate "Richtek RT5033 Power Management IC" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + help + This driver provides for the Richtek RT5033 Power Management IC, + which includes the I2C driver and the Core APIs. This driver provides + common support for accessing the device. The device supports multiple + sub-devices like charger, fuel gauge, flash LED, current source, + LDO and Buck. + config MFD_RTSX_USB tristate "Realtek USB card reader" depends on USB diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 53467e211381..19f3d744e3bd 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -113,7 +113,7 @@ obj-$(CONFIG_MFD_DA9055) += da9055.o da9063-objs := da9063-core.o da9063-irq.o da9063-i2c.o obj-$(CONFIG_MFD_DA9063) += da9063.o - +obj-$(CONFIG_MFD_DA9150) += da9150-core.o obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o @@ -153,6 +153,7 @@ obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o +obj-$(CONFIG_MFD_QCOM_RPM) += qcom_rpm.o obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_TPS65090) += tps65090.o @@ -176,6 +177,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o obj-$(CONFIG_MFD_DLN2) += dln2.o +obj-$(CONFIG_MFD_RT5033) += rt5033.o intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index f38bc98a3c57..facd3610ac77 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -86,6 +86,7 @@ static const struct mfd_cell da9063_devs[] = { }, { .name = DA9063_DRVNAME_WATCHDOG, + .of_compatible = "dlg,da9063-watchdog", }, { .name = DA9063_DRVNAME_HWMON, @@ -101,6 +102,7 @@ static const struct mfd_cell da9063_devs[] = { .name = DA9063_DRVNAME_RTC, .num_resources = ARRAY_SIZE(da9063_rtc_resources), .resources = da9063_rtc_resources, + .of_compatible = "dlg,da9063-rtc", }, { .name = DA9063_DRVNAME_VIBRATION, diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c index 21fd8d9a217b..6f3a7c0001f9 100644 --- a/drivers/mfd/da9063-i2c.c +++ b/drivers/mfd/da9063-i2c.c @@ -25,6 +25,9 @@ #include <linux/mfd/da9063/pdata.h> #include <linux/mfd/da9063/registers.h> +#include <linux/of.h> +#include <linux/regulator/of_regulator.h> + static const struct regmap_range da9063_ad_readable_ranges[] = { { .range_min = DA9063_REG_PAGE_CON, @@ -203,6 +206,11 @@ static struct regmap_config da9063_regmap_config = { .cache_type = REGCACHE_RBTREE, }; +static const struct of_device_id da9063_dt_ids[] = { + { .compatible = "dlg,da9063", }, + { } +}; +MODULE_DEVICE_TABLE(of, da9063_dt_ids); static int da9063_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -257,6 +265,7 @@ static struct i2c_driver da9063_i2c_driver = { .driver = { .name = "da9063", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(da9063_dt_ids), }, .probe = da9063_i2c_probe, .remove = da9063_i2c_remove, diff --git a/drivers/mfd/da9150-core.c b/drivers/mfd/da9150-core.c new file mode 100644 index 000000000000..4d757b97ef9a --- /dev/null +++ b/drivers/mfd/da9150-core.c @@ -0,0 +1,413 @@ +/* + * DA9150 Core MFD Driver + * + * Copyright (c) 2014 Dialog Semiconductor + * + * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/mfd/da9150/core.h> +#include <linux/mfd/da9150/registers.h> + +static bool da9150_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case DA9150_PAGE_CON: + case DA9150_STATUS_A: + case DA9150_STATUS_B: + case DA9150_STATUS_C: + case DA9150_STATUS_D: + case DA9150_STATUS_E: + case DA9150_STATUS_F: + case DA9150_STATUS_G: + case DA9150_STATUS_H: + case DA9150_STATUS_I: + case DA9150_STATUS_J: + case DA9150_STATUS_K: + case DA9150_STATUS_L: + case DA9150_STATUS_N: + case DA9150_FAULT_LOG_A: + case DA9150_FAULT_LOG_B: + case DA9150_EVENT_E: + case DA9150_EVENT_F: + case DA9150_EVENT_G: + case DA9150_EVENT_H: + case DA9150_CONTROL_B: + case DA9150_CONTROL_C: + case DA9150_GPADC_MAN: + case DA9150_GPADC_RES_A: + case DA9150_GPADC_RES_B: + case DA9150_ADETVB_CFG_C: + case DA9150_ADETD_STAT: + case DA9150_ADET_CMPSTAT: + case DA9150_ADET_CTRL_A: + case DA9150_PPR_TCTR_B: + case DA9150_COREBTLD_STAT_A: + case DA9150_CORE_DATA_A: + case DA9150_CORE_DATA_B: + case DA9150_CORE_DATA_C: + case DA9150_CORE_DATA_D: + case DA9150_CORE2WIRE_STAT_A: + case DA9150_FW_CTRL_C: + case DA9150_FG_CTRL_B: + case DA9150_FW_CTRL_B: + case DA9150_GPADC_CMAN: + case DA9150_GPADC_CRES_A: + case DA9150_GPADC_CRES_B: + case DA9150_CC_ICHG_RES_A: + case DA9150_CC_ICHG_RES_B: + case DA9150_CC_IAVG_RES_A: + case DA9150_CC_IAVG_RES_B: + case DA9150_TAUX_CTRL_A: + case DA9150_TAUX_VALUE_H: + case DA9150_TAUX_VALUE_L: + case DA9150_TBAT_RES_A: + case DA9150_TBAT_RES_B: + return true; + default: + return false; + } +} + +static const struct regmap_range_cfg da9150_range_cfg[] = { + { + .range_min = DA9150_PAGE_CON, + .range_max = DA9150_TBAT_RES_B, + .selector_reg = DA9150_PAGE_CON, + .selector_mask = DA9150_I2C_PAGE_MASK, + .selector_shift = DA9150_I2C_PAGE_SHIFT, + .window_start = 0, + .window_len = 256, + }, +}; + +static struct regmap_config da9150_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .ranges = da9150_range_cfg, + .num_ranges = ARRAY_SIZE(da9150_range_cfg), + .max_register = DA9150_TBAT_RES_B, + + .cache_type = REGCACHE_RBTREE, + + .volatile_reg = da9150_volatile_reg, +}; + +u8 da9150_reg_read(struct da9150 *da9150, u16 reg) +{ + int val, ret; + + ret = regmap_read(da9150->regmap, reg, &val); + if (ret) + dev_err(da9150->dev, "Failed to read from reg 0x%x: %d\n", + reg, ret); + + return (u8) val; +} +EXPORT_SYMBOL_GPL(da9150_reg_read); + +void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val) +{ + int ret; + + ret = regmap_write(da9150->regmap, reg, val); + if (ret) + dev_err(da9150->dev, "Failed to write to reg 0x%x: %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_reg_write); + +void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val) +{ + int ret; + + ret = regmap_update_bits(da9150->regmap, reg, mask, val); + if (ret) + dev_err(da9150->dev, "Failed to set bits in reg 0x%x: %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_set_bits); + +void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf) +{ + int ret; + + ret = regmap_bulk_read(da9150->regmap, reg, buf, count); + if (ret) + dev_err(da9150->dev, "Failed to bulk read from reg 0x%x: %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_bulk_read); + +void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf) +{ + int ret; + + ret = regmap_raw_write(da9150->regmap, reg, buf, count); + if (ret) + dev_err(da9150->dev, "Failed to bulk write to reg 0x%x %d\n", + reg, ret); +} +EXPORT_SYMBOL_GPL(da9150_bulk_write); + +static struct regmap_irq da9150_irqs[] = { + [DA9150_IRQ_VBUS] = { + .reg_offset = 0, + .mask = DA9150_E_VBUS_MASK, + }, + [DA9150_IRQ_CHG] = { + .reg_offset = 0, + .mask = DA9150_E_CHG_MASK, + }, + [DA9150_IRQ_TCLASS] = { + .reg_offset = 0, + .mask = DA9150_E_TCLASS_MASK, + }, + [DA9150_IRQ_TJUNC] = { + .reg_offset = 0, + .mask = DA9150_E_TJUNC_MASK, + }, + [DA9150_IRQ_VFAULT] = { + .reg_offset = 0, + .mask = DA9150_E_VFAULT_MASK, + }, + [DA9150_IRQ_CONF] = { + .reg_offset = 1, + .mask = DA9150_E_CONF_MASK, + }, + [DA9150_IRQ_DAT] = { + .reg_offset = 1, + .mask = DA9150_E_DAT_MASK, + }, + [DA9150_IRQ_DTYPE] = { + .reg_offset = 1, + .mask = DA9150_E_DTYPE_MASK, + }, + [DA9150_IRQ_ID] = { + .reg_offset = 1, + .mask = DA9150_E_ID_MASK, + }, + [DA9150_IRQ_ADP] = { + .reg_offset = 1, + .mask = DA9150_E_ADP_MASK, + }, + [DA9150_IRQ_SESS_END] = { + .reg_offset = 1, + .mask = DA9150_E_SESS_END_MASK, + }, + [DA9150_IRQ_SESS_VLD] = { + .reg_offset = 1, + .mask = DA9150_E_SESS_VLD_MASK, + }, + [DA9150_IRQ_FG] = { + .reg_offset = 2, + .mask = DA9150_E_FG_MASK, + }, + [DA9150_IRQ_GP] = { + .reg_offset = 2, + .mask = DA9150_E_GP_MASK, + }, + [DA9150_IRQ_TBAT] = { + .reg_offset = 2, + .mask = DA9150_E_TBAT_MASK, + }, + [DA9150_IRQ_GPIOA] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOA_MASK, + }, + [DA9150_IRQ_GPIOB] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOB_MASK, + }, + [DA9150_IRQ_GPIOC] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOC_MASK, + }, + [DA9150_IRQ_GPIOD] = { + .reg_offset = 2, + .mask = DA9150_E_GPIOD_MASK, + }, + [DA9150_IRQ_GPADC] = { + .reg_offset = 2, + .mask = DA9150_E_GPADC_MASK, + }, + [DA9150_IRQ_WKUP] = { + .reg_offset = 3, + .mask = DA9150_E_WKUP_MASK, + }, +}; + +static struct regmap_irq_chip da9150_regmap_irq_chip = { + .name = "da9150_irq", + .status_base = DA9150_EVENT_E, + .mask_base = DA9150_IRQ_MASK_E, + .ack_base = DA9150_EVENT_E, + .num_regs = DA9150_NUM_IRQ_REGS, + .irqs = da9150_irqs, + .num_irqs = ARRAY_SIZE(da9150_irqs), +}; + +static struct resource da9150_gpadc_resources[] = { + { + .name = "GPADC", + .start = DA9150_IRQ_GPADC, + .end = DA9150_IRQ_GPADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource da9150_charger_resources[] = { + { + .name = "CHG_STATUS", + .start = DA9150_IRQ_CHG, + .end = DA9150_IRQ_CHG, + .flags = IORESOURCE_IRQ, + }, + { + .name = "CHG_TJUNC", + .start = DA9150_IRQ_TJUNC, + .end = DA9150_IRQ_TJUNC, + .flags = IORESOURCE_IRQ, + }, + { + .name = "CHG_VFAULT", + .start = DA9150_IRQ_VFAULT, + .end = DA9150_IRQ_VFAULT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "CHG_VBUS", + .start = DA9150_IRQ_VBUS, + .end = DA9150_IRQ_VBUS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell da9150_devs[] = { + { + .name = "da9150-gpadc", + .of_compatible = "dlg,da9150-gpadc", + .resources = da9150_gpadc_resources, + .num_resources = ARRAY_SIZE(da9150_gpadc_resources), + }, + { + .name = "da9150-charger", + .of_compatible = "dlg,da9150-charger", + .resources = da9150_charger_resources, + .num_resources = ARRAY_SIZE(da9150_charger_resources), + }, +}; + +static int da9150_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct da9150 *da9150; + struct da9150_pdata *pdata = dev_get_platdata(&client->dev); + int ret; + + da9150 = devm_kzalloc(&client->dev, sizeof(*da9150), GFP_KERNEL); + if (!da9150) + return -ENOMEM; + + da9150->dev = &client->dev; + da9150->irq = client->irq; + i2c_set_clientdata(client, da9150); + + da9150->regmap = devm_regmap_init_i2c(client, &da9150_regmap_config); + if (IS_ERR(da9150->regmap)) { + ret = PTR_ERR(da9150->regmap); + dev_err(da9150->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + da9150->irq_base = pdata ? pdata->irq_base : -1; + + ret = regmap_add_irq_chip(da9150->regmap, da9150->irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + da9150->irq_base, &da9150_regmap_irq_chip, + &da9150->regmap_irq_data); + if (ret) + return ret; + + da9150->irq_base = regmap_irq_chip_get_base(da9150->regmap_irq_data); + enable_irq_wake(da9150->irq); + + ret = mfd_add_devices(da9150->dev, -1, da9150_devs, + ARRAY_SIZE(da9150_devs), NULL, + da9150->irq_base, NULL); + if (ret) { + dev_err(da9150->dev, "Failed to add child devices: %d\n", ret); + regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data); + return ret; + } + + return 0; +} + +static int da9150_remove(struct i2c_client *client) +{ + struct da9150 *da9150 = i2c_get_clientdata(client); + + regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data); + mfd_remove_devices(da9150->dev); + + return 0; +} + +static void da9150_shutdown(struct i2c_client *client) +{ + struct da9150 *da9150 = i2c_get_clientdata(client); + + /* Make sure we have a wakup source for the device */ + da9150_set_bits(da9150, DA9150_CONFIG_D, + DA9150_WKUP_PM_EN_MASK, + DA9150_WKUP_PM_EN_MASK); + + /* Set device to DISABLED mode */ + da9150_set_bits(da9150, DA9150_CONTROL_C, + DA9150_DISABLE_MASK, DA9150_DISABLE_MASK); +} + +static const struct i2c_device_id da9150_i2c_id[] = { + { "da9150", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, da9150_i2c_id); + +static const struct of_device_id da9150_of_match[] = { + { .compatible = "dlg,da9150", }, + { } +}; +MODULE_DEVICE_TABLE(of, da9150_of_match); + +static struct i2c_driver da9150_driver = { + .driver = { + .name = "da9150", + .of_match_table = of_match_ptr(da9150_of_match), + }, + .probe = da9150_probe, + .remove = da9150_remove, + .shutdown = da9150_shutdown, + .id_table = da9150_i2c_id, +}; + +module_i2c_driver(da9150_driver); + +MODULE_DESCRIPTION("MFD Core Driver for DA9150"); +MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c index c835e85539b2..9bbc642a7b9d 100644 --- a/drivers/mfd/davinci_voicecodec.c +++ b/drivers/mfd/davinci_voicecodec.c @@ -33,7 +33,7 @@ #include <linux/mfd/davinci_voicecodec.h> -static struct regmap_config davinci_vc_regmap = { +static const struct regmap_config davinci_vc_regmap = { .reg_bits = 32, .val_bits = 32, }; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 16162bf43656..cc1a404328c2 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -675,15 +675,6 @@ bool prcmu_has_arm_maxopp(void) } /** - * prcmu_get_boot_status - PRCMU boot status checking - * Returns: the current PRCMU boot status - */ -int prcmu_get_boot_status(void) -{ - return readb(tcdm_base + PRCM_BOOT_STATUS); -} - -/** * prcmu_set_rc_a2p - This function is used to run few power state sequences * @val: Value to be set, i.e. transition requested * Returns: 0 on success, -EINVAL on invalid argument diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index 6d49685d4ee4..1be9bd1c046d 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -587,12 +587,19 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2) int i; for (i = 0; i < DLN2_MAX_URBS; i++) { - usb_kill_urb(dln2->rx_urb[i]); usb_free_urb(dln2->rx_urb[i]); kfree(dln2->rx_buf[i]); } } +static void dln2_stop_rx_urbs(struct dln2_dev *dln2) +{ + int i; + + for (i = 0; i < DLN2_MAX_URBS; i++) + usb_kill_urb(dln2->rx_urb[i]); +} + static void dln2_free(struct dln2_dev *dln2) { dln2_free_rx_urbs(dln2); @@ -604,9 +611,7 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2, struct usb_host_interface *hostif) { int i; - int ret; const int rx_max_size = DLN2_RX_BUF_SIZE; - struct device *dev = &dln2->interface->dev; for (i = 0; i < DLN2_MAX_URBS; i++) { dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL); @@ -620,8 +625,19 @@ static int dln2_setup_rx_urbs(struct dln2_dev *dln2, usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev, usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in), dln2->rx_buf[i], rx_max_size, dln2_rx, dln2); + } - ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL); + return 0; +} + +static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp) +{ + struct device *dev = &dln2->interface->dev; + int ret; + int i; + + for (i = 0; i < DLN2_MAX_URBS; i++) { + ret = usb_submit_urb(dln2->rx_urb[i], gfp); if (ret < 0) { dev_err(dev, "failed to submit RX URB: %d\n", ret); return ret; @@ -665,9 +681,8 @@ static const struct mfd_cell dln2_devs[] = { }, }; -static void dln2_disconnect(struct usb_interface *interface) +static void dln2_stop(struct dln2_dev *dln2) { - struct dln2_dev *dln2 = usb_get_intfdata(interface); int i, j; /* don't allow starting new transfers */ @@ -696,6 +711,15 @@ static void dln2_disconnect(struct usb_interface *interface) /* wait for transfers to end */ wait_event(dln2->disconnect_wq, !dln2->active_transfers); + dln2_stop_rx_urbs(dln2); +} + +static void dln2_disconnect(struct usb_interface *interface) +{ + struct dln2_dev *dln2 = usb_get_intfdata(interface); + + dln2_stop(dln2); + mfd_remove_devices(&interface->dev); dln2_free(dln2); @@ -738,28 +762,53 @@ static int dln2_probe(struct usb_interface *interface, ret = dln2_setup_rx_urbs(dln2, hostif); if (ret) - goto out_cleanup; + goto out_free; + + ret = dln2_start_rx_urbs(dln2, GFP_KERNEL); + if (ret) + goto out_stop_rx; ret = dln2_hw_init(dln2); if (ret < 0) { dev_err(dev, "failed to initialize hardware\n"); - goto out_cleanup; + goto out_stop_rx; } ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs)); if (ret != 0) { dev_err(dev, "failed to add mfd devices to core\n"); - goto out_cleanup; + goto out_stop_rx; } return 0; -out_cleanup: +out_stop_rx: + dln2_stop_rx_urbs(dln2); + +out_free: dln2_free(dln2); return ret; } +static int dln2_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct dln2_dev *dln2 = usb_get_intfdata(iface); + + dln2_stop(dln2); + + return 0; +} + +static int dln2_resume(struct usb_interface *iface) +{ + struct dln2_dev *dln2 = usb_get_intfdata(iface); + + dln2->disconnect = false; + + return dln2_start_rx_urbs(dln2, GFP_NOIO); +} + static const struct usb_device_id dln2_table[] = { { USB_DEVICE(0xa257, 0x2013) }, { } @@ -772,6 +821,8 @@ static struct usb_driver dln2_driver = { .probe = dln2_probe, .disconnect = dln2_disconnect, .id_table = dln2_table, + .suspend = dln2_suspend, + .resume = dln2_resume, }; module_usb_driver(dln2_driver); diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c index 321a2656fd00..7210ae28bf81 100644 --- a/drivers/mfd/hi6421-pmic-core.c +++ b/drivers/mfd/hi6421-pmic-core.c @@ -35,7 +35,7 @@ static const struct mfd_cell hi6421_devs[] = { { .name = "hi6421-regulator", }, }; -static struct regmap_config hi6421_regmap_config = { +static const struct regmap_config hi6421_regmap_config = { .reg_bits = 32, .reg_stride = 4, .val_bits = 8, diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c index df7b0642a5b4..80cef048b904 100644 --- a/drivers/mfd/intel_soc_pmic_core.c +++ b/drivers/mfd/intel_soc_pmic_core.c @@ -64,6 +64,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c, config = (struct intel_soc_pmic_config *)id->driver_data; pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + dev_set_drvdata(dev, pmic); pmic->regmap = devm_regmap_init_i2c(i2c, config->regmap_config); diff --git a/drivers/mfd/intel_soc_pmic_core.h b/drivers/mfd/intel_soc_pmic_core.h index 33aacd9baddc..9498d6719847 100644 --- a/drivers/mfd/intel_soc_pmic_core.h +++ b/drivers/mfd/intel_soc_pmic_core.h @@ -23,7 +23,7 @@ struct intel_soc_pmic_config { unsigned long irq_flags; struct mfd_cell *cell_dev; int n_cell_devs; - struct regmap_config *regmap_config; + const struct regmap_config *regmap_config; struct regmap_irq_chip *irq_chip; }; diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c index c85e2ecb868a..4cc1b324e971 100644 --- a/drivers/mfd/intel_soc_pmic_crc.c +++ b/drivers/mfd/intel_soc_pmic_crc.c @@ -111,7 +111,7 @@ static struct mfd_cell crystal_cove_dev[] = { }, }; -static struct regmap_config crystal_cove_regmap_config = { +static const struct regmap_config crystal_cove_regmap_config = { .reg_bits = 8, .val_bits = 8, diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c index 8c29f7b27324..d42fbb667d8c 100644 --- a/drivers/mfd/lm3533-core.c +++ b/drivers/mfd/lm3533-core.c @@ -583,7 +583,7 @@ static bool lm3533_precious_register(struct device *dev, unsigned int reg) } } -static struct regmap_config regmap_config = { +static const struct regmap_config regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = LM3533_REG_MAX, diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index 5c38df35a84d..a56e4ba5227b 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -75,6 +75,7 @@ static struct lpc_sch_info sch_chipset_info[] = { [LPC_QUARK_X1000] = { .io_size_gpio = GPIO_IO_SIZE, .irq_gpio = GPIO_IRQ_QUARK_X1000, + .io_size_wdt = WDT_IO_SIZE, }, }; diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index 929795eae9fc..760d08d7923d 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -111,17 +111,17 @@ static bool max77802_is_volatile_reg(struct device *dev, unsigned int reg) max77802_rtc_is_volatile_reg(dev, reg)); } -static struct regmap_config max77686_regmap_config = { +static const struct regmap_config max77686_regmap_config = { .reg_bits = 8, .val_bits = 8, }; -static struct regmap_config max77686_rtc_regmap_config = { +static const struct regmap_config max77686_rtc_regmap_config = { .reg_bits = 8, .val_bits = 8, }; -static struct regmap_config max77802_regmap_config = { +static const struct regmap_config max77802_regmap_config = { .reg_bits = 8, .val_bits = 8, .writeable_reg = max77802_is_accessible_reg, @@ -205,24 +205,10 @@ static const struct of_device_id max77686_pmic_dt_match[] = { { }, }; -static struct max77686_platform_data *max77686_i2c_parse_dt_pdata(struct device - *dev) -{ - struct max77686_platform_data *pd; - - pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); - if (!pd) - return NULL; - - dev->platform_data = pd; - return pd; -} - static int max77686_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct max77686_dev *max77686 = NULL; - struct max77686_platform_data *pdata = dev_get_platdata(&i2c->dev); const struct of_device_id *match; unsigned int data; int ret = 0; @@ -233,14 +219,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c, const struct mfd_cell *cells; int n_devs; - if (IS_ENABLED(CONFIG_OF) && i2c->dev.of_node && !pdata) - pdata = max77686_i2c_parse_dt_pdata(&i2c->dev); - - if (!pdata) { - dev_err(&i2c->dev, "No platform data found.\n"); - return -EINVAL; - } - max77686 = devm_kzalloc(&i2c->dev, sizeof(struct max77686_dev), GFP_KERNEL); if (!max77686) @@ -259,7 +237,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c, max77686->dev = &i2c->dev; max77686->i2c = i2c; - max77686->wakeup = pdata->wakeup; max77686->irq = i2c->irq; if (max77686->type == TYPE_MAX77686) { diff --git a/drivers/mfd/mc13xxx-i2c.c b/drivers/mfd/mc13xxx-i2c.c index ae3addb153a2..68b844811566 100644 --- a/drivers/mfd/mc13xxx-i2c.c +++ b/drivers/mfd/mc13xxx-i2c.c @@ -46,7 +46,7 @@ static const struct of_device_id mc13xxx_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids); -static struct regmap_config mc13xxx_regmap_i2c_config = { +static const struct regmap_config mc13xxx_regmap_i2c_config = { .reg_bits = 8, .val_bits = 24, diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c index 702925e242c9..58a170e45d88 100644 --- a/drivers/mfd/mc13xxx-spi.c +++ b/drivers/mfd/mc13xxx-spi.c @@ -48,7 +48,7 @@ static const struct of_device_id mc13xxx_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, mc13xxx_dt_ids); -static struct regmap_config mc13xxx_regmap_spi_config = { +static const struct regmap_config mc13xxx_regmap_spi_config = { .reg_bits = 7, .pad_bits = 1, .val_bits = 24, diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 04cd54dd507c..1d924d1533c0 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -129,16 +129,6 @@ static inline u32 usbhs_read(void __iomem *base, u32 reg) return readl_relaxed(base + reg); } -static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val) -{ - writeb_relaxed(val, base + reg); -} - -static inline u8 usbhs_readb(void __iomem *base, u8 reg) -{ - return readb_relaxed(base + reg); -} - /*-------------------------------------------------------------------------*/ /** diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 43664eb69c93..6155d123a84e 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -183,7 +183,7 @@ static int pcf50633_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pcf50633_pm, pcf50633_suspend, pcf50633_resume); -static struct regmap_config pcf50633_regmap_config = { +static const struct regmap_config pcf50633_regmap_config = { .reg_bits = 8, .val_bits = 8, }; diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c new file mode 100644 index 000000000000..f696328c2933 --- /dev/null +++ b/drivers/mfd/qcom_rpm.c @@ -0,0 +1,581 @@ +/* + * Copyright (c) 2014, Sony Mobile Communications AB. + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * Author: Bjorn Andersson <bjorn.andersson@sonymobile.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/mfd/qcom_rpm.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> + +#include <dt-bindings/mfd/qcom-rpm.h> + +struct qcom_rpm_resource { + unsigned target_id; + unsigned status_id; + unsigned select_id; + unsigned size; +}; + +struct qcom_rpm_data { + u32 version; + const struct qcom_rpm_resource *resource_table; + unsigned n_resources; +}; + +struct qcom_rpm { + struct device *dev; + struct regmap *ipc_regmap; + unsigned ipc_offset; + unsigned ipc_bit; + + struct completion ack; + struct mutex lock; + + void __iomem *status_regs; + void __iomem *ctrl_regs; + void __iomem *req_regs; + + u32 ack_status; + + const struct qcom_rpm_data *data; +}; + +#define RPM_STATUS_REG(rpm, i) ((rpm)->status_regs + (i) * 4) +#define RPM_CTRL_REG(rpm, i) ((rpm)->ctrl_regs + (i) * 4) +#define RPM_REQ_REG(rpm, i) ((rpm)->req_regs + (i) * 4) + +#define RPM_REQUEST_TIMEOUT (5 * HZ) + +#define RPM_REQUEST_CONTEXT 3 +#define RPM_REQ_SELECT 11 +#define RPM_ACK_CONTEXT 15 +#define RPM_ACK_SELECTOR 23 +#define RPM_SELECT_SIZE 7 + +#define RPM_NOTIFICATION BIT(30) +#define RPM_REJECTED BIT(31) + +#define RPM_SIGNAL BIT(2) + +static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = { + [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 }, + [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 }, + [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 }, + [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 }, + [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 }, + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 }, + [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 }, + [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 }, + [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 }, + [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 }, + [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 }, + [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 }, + [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 }, + [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 }, + [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 }, + [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 }, + [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 }, + [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 30 }, + [QCOM_RPM_MM_FABRIC_HALT] = { 89, 27, 26, 1 }, + [QCOM_RPM_MM_FABRIC_MODE] = { 91, 28, 27, 1 }, + [QCOM_RPM_MM_FABRIC_IOCTL] = { 94, 29, 28, 1 }, + [QCOM_RPM_MM_FABRIC_ARB] = { 95, 30, 29, 21 }, + [QCOM_RPM_PM8921_SMPS1] = { 116, 31, 30, 2 }, + [QCOM_RPM_PM8921_SMPS2] = { 118, 33, 31, 2 }, + [QCOM_RPM_PM8921_SMPS3] = { 120, 35, 32, 2 }, + [QCOM_RPM_PM8921_SMPS4] = { 122, 37, 33, 2 }, + [QCOM_RPM_PM8921_SMPS5] = { 124, 39, 34, 2 }, + [QCOM_RPM_PM8921_SMPS6] = { 126, 41, 35, 2 }, + [QCOM_RPM_PM8921_SMPS7] = { 128, 43, 36, 2 }, + [QCOM_RPM_PM8921_SMPS8] = { 130, 45, 37, 2 }, + [QCOM_RPM_PM8921_LDO1] = { 132, 47, 38, 2 }, + [QCOM_RPM_PM8921_LDO2] = { 134, 49, 39, 2 }, + [QCOM_RPM_PM8921_LDO3] = { 136, 51, 40, 2 }, + [QCOM_RPM_PM8921_LDO4] = { 138, 53, 41, 2 }, + [QCOM_RPM_PM8921_LDO5] = { 140, 55, 42, 2 }, + [QCOM_RPM_PM8921_LDO6] = { 142, 57, 43, 2 }, + [QCOM_RPM_PM8921_LDO7] = { 144, 59, 44, 2 }, + [QCOM_RPM_PM8921_LDO8] = { 146, 61, 45, 2 }, + [QCOM_RPM_PM8921_LDO9] = { 148, 63, 46, 2 }, + [QCOM_RPM_PM8921_LDO10] = { 150, 65, 47, 2 }, + [QCOM_RPM_PM8921_LDO11] = { 152, 67, 48, 2 }, + [QCOM_RPM_PM8921_LDO12] = { 154, 69, 49, 2 }, + [QCOM_RPM_PM8921_LDO13] = { 156, 71, 50, 2 }, + [QCOM_RPM_PM8921_LDO14] = { 158, 73, 51, 2 }, + [QCOM_RPM_PM8921_LDO15] = { 160, 75, 52, 2 }, + [QCOM_RPM_PM8921_LDO16] = { 162, 77, 53, 2 }, + [QCOM_RPM_PM8921_LDO17] = { 164, 79, 54, 2 }, + [QCOM_RPM_PM8921_LDO18] = { 166, 81, 55, 2 }, + [QCOM_RPM_PM8921_LDO19] = { 168, 83, 56, 2 }, + [QCOM_RPM_PM8921_LDO20] = { 170, 85, 57, 2 }, + [QCOM_RPM_PM8921_LDO21] = { 172, 87, 58, 2 }, + [QCOM_RPM_PM8921_LDO22] = { 174, 89, 59, 2 }, + [QCOM_RPM_PM8921_LDO23] = { 176, 91, 60, 2 }, + [QCOM_RPM_PM8921_LDO24] = { 178, 93, 61, 2 }, + [QCOM_RPM_PM8921_LDO25] = { 180, 95, 62, 2 }, + [QCOM_RPM_PM8921_LDO26] = { 182, 97, 63, 2 }, + [QCOM_RPM_PM8921_LDO27] = { 184, 99, 64, 2 }, + [QCOM_RPM_PM8921_LDO28] = { 186, 101, 65, 2 }, + [QCOM_RPM_PM8921_LDO29] = { 188, 103, 66, 2 }, + [QCOM_RPM_PM8921_CLK1] = { 190, 105, 67, 2 }, + [QCOM_RPM_PM8921_CLK2] = { 192, 107, 68, 2 }, + [QCOM_RPM_PM8921_LVS1] = { 194, 109, 69, 1 }, + [QCOM_RPM_PM8921_LVS2] = { 195, 110, 70, 1 }, + [QCOM_RPM_PM8921_LVS3] = { 196, 111, 71, 1 }, + [QCOM_RPM_PM8921_LVS4] = { 197, 112, 72, 1 }, + [QCOM_RPM_PM8921_LVS5] = { 198, 113, 73, 1 }, + [QCOM_RPM_PM8921_LVS6] = { 199, 114, 74, 1 }, + [QCOM_RPM_PM8921_LVS7] = { 200, 115, 75, 1 }, + [QCOM_RPM_PM8821_SMPS1] = { 201, 116, 76, 2 }, + [QCOM_RPM_PM8821_SMPS2] = { 203, 118, 77, 2 }, + [QCOM_RPM_PM8821_LDO1] = { 205, 120, 78, 2 }, + [QCOM_RPM_PM8921_NCP] = { 207, 122, 80, 2 }, + [QCOM_RPM_CXO_BUFFERS] = { 209, 124, 81, 1 }, + [QCOM_RPM_USB_OTG_SWITCH] = { 210, 125, 82, 1 }, + [QCOM_RPM_HDMI_SWITCH] = { 211, 126, 83, 1 }, + [QCOM_RPM_DDR_DMM] = { 212, 127, 84, 2 }, + [QCOM_RPM_VDDMIN_GPIO] = { 215, 131, 89, 1 }, +}; + +static const struct qcom_rpm_data apq8064_template = { + .version = 3, + .resource_table = apq8064_rpm_resource_table, + .n_resources = ARRAY_SIZE(apq8064_rpm_resource_table), +}; + +static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = { + [QCOM_RPM_CXO_CLK] = { 32, 12, 5, 1 }, + [QCOM_RPM_PXO_CLK] = { 33, 13, 6, 1 }, + [QCOM_RPM_PLL_4] = { 34, 14, 7, 1 }, + [QCOM_RPM_APPS_FABRIC_CLK] = { 35, 15, 8, 1 }, + [QCOM_RPM_SYS_FABRIC_CLK] = { 36, 16, 9, 1 }, + [QCOM_RPM_MM_FABRIC_CLK] = { 37, 17, 10, 1 }, + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 38, 18, 11, 1 }, + [QCOM_RPM_SFPB_CLK] = { 39, 19, 12, 1 }, + [QCOM_RPM_CFPB_CLK] = { 40, 20, 13, 1 }, + [QCOM_RPM_MMFPB_CLK] = { 41, 21, 14, 1 }, + [QCOM_RPM_SMI_CLK] = { 42, 22, 15, 1 }, + [QCOM_RPM_EBI1_CLK] = { 43, 23, 16, 1 }, + [QCOM_RPM_APPS_L2_CACHE_CTL] = { 44, 24, 17, 1 }, + [QCOM_RPM_APPS_FABRIC_HALT] = { 45, 25, 18, 2 }, + [QCOM_RPM_APPS_FABRIC_MODE] = { 47, 26, 19, 3 }, + [QCOM_RPM_APPS_FABRIC_ARB] = { 51, 28, 21, 6 }, + [QCOM_RPM_SYS_FABRIC_HALT] = { 63, 29, 22, 2 }, + [QCOM_RPM_SYS_FABRIC_MODE] = { 65, 30, 23, 3 }, + [QCOM_RPM_SYS_FABRIC_ARB] = { 69, 32, 25, 22 }, + [QCOM_RPM_MM_FABRIC_HALT] = { 105, 33, 26, 2 }, + [QCOM_RPM_MM_FABRIC_MODE] = { 107, 34, 27, 3 }, + [QCOM_RPM_MM_FABRIC_ARB] = { 111, 36, 29, 23 }, + [QCOM_RPM_PM8901_SMPS0] = { 134, 37, 30, 2 }, + [QCOM_RPM_PM8901_SMPS1] = { 136, 39, 31, 2 }, + [QCOM_RPM_PM8901_SMPS2] = { 138, 41, 32, 2 }, + [QCOM_RPM_PM8901_SMPS3] = { 140, 43, 33, 2 }, + [QCOM_RPM_PM8901_SMPS4] = { 142, 45, 34, 2 }, + [QCOM_RPM_PM8901_LDO0] = { 144, 47, 35, 2 }, + [QCOM_RPM_PM8901_LDO1] = { 146, 49, 36, 2 }, + [QCOM_RPM_PM8901_LDO2] = { 148, 51, 37, 2 }, + [QCOM_RPM_PM8901_LDO3] = { 150, 53, 38, 2 }, + [QCOM_RPM_PM8901_LDO4] = { 152, 55, 39, 2 }, + [QCOM_RPM_PM8901_LDO5] = { 154, 57, 40, 2 }, + [QCOM_RPM_PM8901_LDO6] = { 156, 59, 41, 2 }, + [QCOM_RPM_PM8901_LVS0] = { 158, 61, 42, 1 }, + [QCOM_RPM_PM8901_LVS1] = { 159, 62, 43, 1 }, + [QCOM_RPM_PM8901_LVS2] = { 160, 63, 44, 1 }, + [QCOM_RPM_PM8901_LVS3] = { 161, 64, 45, 1 }, + [QCOM_RPM_PM8901_MVS] = { 162, 65, 46, 1 }, + [QCOM_RPM_PM8058_SMPS0] = { 163, 66, 47, 2 }, + [QCOM_RPM_PM8058_SMPS1] = { 165, 68, 48, 2 }, + [QCOM_RPM_PM8058_SMPS2] = { 167, 70, 49, 2 }, + [QCOM_RPM_PM8058_SMPS3] = { 169, 72, 50, 2 }, + [QCOM_RPM_PM8058_SMPS4] = { 171, 74, 51, 2 }, + [QCOM_RPM_PM8058_LDO0] = { 173, 76, 52, 2 }, + [QCOM_RPM_PM8058_LDO1] = { 175, 78, 53, 2 }, + [QCOM_RPM_PM8058_LDO2] = { 177, 80, 54, 2 }, + [QCOM_RPM_PM8058_LDO3] = { 179, 82, 55, 2 }, + [QCOM_RPM_PM8058_LDO4] = { 181, 84, 56, 2 }, + [QCOM_RPM_PM8058_LDO5] = { 183, 86, 57, 2 }, + [QCOM_RPM_PM8058_LDO6] = { 185, 88, 58, 2 }, + [QCOM_RPM_PM8058_LDO7] = { 187, 90, 59, 2 }, + [QCOM_RPM_PM8058_LDO8] = { 189, 92, 60, 2 }, + [QCOM_RPM_PM8058_LDO9] = { 191, 94, 61, 2 }, + [QCOM_RPM_PM8058_LDO10] = { 193, 96, 62, 2 }, + [QCOM_RPM_PM8058_LDO11] = { 195, 98, 63, 2 }, + [QCOM_RPM_PM8058_LDO12] = { 197, 100, 64, 2 }, + [QCOM_RPM_PM8058_LDO13] = { 199, 102, 65, 2 }, + [QCOM_RPM_PM8058_LDO14] = { 201, 104, 66, 2 }, + [QCOM_RPM_PM8058_LDO15] = { 203, 106, 67, 2 }, + [QCOM_RPM_PM8058_LDO16] = { 205, 108, 68, 2 }, + [QCOM_RPM_PM8058_LDO17] = { 207, 110, 69, 2 }, + [QCOM_RPM_PM8058_LDO18] = { 209, 112, 70, 2 }, + [QCOM_RPM_PM8058_LDO19] = { 211, 114, 71, 2 }, + [QCOM_RPM_PM8058_LDO20] = { 213, 116, 72, 2 }, + [QCOM_RPM_PM8058_LDO21] = { 215, 118, 73, 2 }, + [QCOM_RPM_PM8058_LDO22] = { 217, 120, 74, 2 }, + [QCOM_RPM_PM8058_LDO23] = { 219, 122, 75, 2 }, + [QCOM_RPM_PM8058_LDO24] = { 221, 124, 76, 2 }, + [QCOM_RPM_PM8058_LDO25] = { 223, 126, 77, 2 }, + [QCOM_RPM_PM8058_LVS0] = { 225, 128, 78, 1 }, + [QCOM_RPM_PM8058_LVS1] = { 226, 129, 79, 1 }, + [QCOM_RPM_PM8058_NCP] = { 227, 130, 80, 2 }, + [QCOM_RPM_CXO_BUFFERS] = { 229, 132, 81, 1 }, +}; + +static const struct qcom_rpm_data msm8660_template = { + .version = 2, + .resource_table = msm8660_rpm_resource_table, + .n_resources = ARRAY_SIZE(msm8660_rpm_resource_table), +}; + +static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = { + [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 }, + [QCOM_RPM_PXO_CLK] = { 26, 10, 6, 1 }, + [QCOM_RPM_APPS_FABRIC_CLK] = { 27, 11, 8, 1 }, + [QCOM_RPM_SYS_FABRIC_CLK] = { 28, 12, 9, 1 }, + [QCOM_RPM_MM_FABRIC_CLK] = { 29, 13, 10, 1 }, + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 30, 14, 11, 1 }, + [QCOM_RPM_SFPB_CLK] = { 31, 15, 12, 1 }, + [QCOM_RPM_CFPB_CLK] = { 32, 16, 13, 1 }, + [QCOM_RPM_MMFPB_CLK] = { 33, 17, 14, 1 }, + [QCOM_RPM_EBI1_CLK] = { 34, 18, 16, 1 }, + [QCOM_RPM_APPS_FABRIC_HALT] = { 35, 19, 18, 1 }, + [QCOM_RPM_APPS_FABRIC_MODE] = { 37, 20, 19, 1 }, + [QCOM_RPM_APPS_FABRIC_IOCTL] = { 40, 21, 20, 1 }, + [QCOM_RPM_APPS_FABRIC_ARB] = { 41, 22, 21, 12 }, + [QCOM_RPM_SYS_FABRIC_HALT] = { 53, 23, 22, 1 }, + [QCOM_RPM_SYS_FABRIC_MODE] = { 55, 24, 23, 1 }, + [QCOM_RPM_SYS_FABRIC_IOCTL] = { 58, 25, 24, 1 }, + [QCOM_RPM_SYS_FABRIC_ARB] = { 59, 26, 25, 29 }, + [QCOM_RPM_MM_FABRIC_HALT] = { 88, 27, 26, 1 }, + [QCOM_RPM_MM_FABRIC_MODE] = { 90, 28, 27, 1 }, + [QCOM_RPM_MM_FABRIC_IOCTL] = { 93, 29, 28, 1 }, + [QCOM_RPM_MM_FABRIC_ARB] = { 94, 30, 29, 23 }, + [QCOM_RPM_PM8921_SMPS1] = { 117, 31, 30, 2 }, + [QCOM_RPM_PM8921_SMPS2] = { 119, 33, 31, 2 }, + [QCOM_RPM_PM8921_SMPS3] = { 121, 35, 32, 2 }, + [QCOM_RPM_PM8921_SMPS4] = { 123, 37, 33, 2 }, + [QCOM_RPM_PM8921_SMPS5] = { 125, 39, 34, 2 }, + [QCOM_RPM_PM8921_SMPS6] = { 127, 41, 35, 2 }, + [QCOM_RPM_PM8921_SMPS7] = { 129, 43, 36, 2 }, + [QCOM_RPM_PM8921_SMPS8] = { 131, 45, 37, 2 }, + [QCOM_RPM_PM8921_LDO1] = { 133, 47, 38, 2 }, + [QCOM_RPM_PM8921_LDO2] = { 135, 49, 39, 2 }, + [QCOM_RPM_PM8921_LDO3] = { 137, 51, 40, 2 }, + [QCOM_RPM_PM8921_LDO4] = { 139, 53, 41, 2 }, + [QCOM_RPM_PM8921_LDO5] = { 141, 55, 42, 2 }, + [QCOM_RPM_PM8921_LDO6] = { 143, 57, 43, 2 }, + [QCOM_RPM_PM8921_LDO7] = { 145, 59, 44, 2 }, + [QCOM_RPM_PM8921_LDO8] = { 147, 61, 45, 2 }, + [QCOM_RPM_PM8921_LDO9] = { 149, 63, 46, 2 }, + [QCOM_RPM_PM8921_LDO10] = { 151, 65, 47, 2 }, + [QCOM_RPM_PM8921_LDO11] = { 153, 67, 48, 2 }, + [QCOM_RPM_PM8921_LDO12] = { 155, 69, 49, 2 }, + [QCOM_RPM_PM8921_LDO13] = { 157, 71, 50, 2 }, + [QCOM_RPM_PM8921_LDO14] = { 159, 73, 51, 2 }, + [QCOM_RPM_PM8921_LDO15] = { 161, 75, 52, 2 }, + [QCOM_RPM_PM8921_LDO16] = { 163, 77, 53, 2 }, + [QCOM_RPM_PM8921_LDO17] = { 165, 79, 54, 2 }, + [QCOM_RPM_PM8921_LDO18] = { 167, 81, 55, 2 }, + [QCOM_RPM_PM8921_LDO19] = { 169, 83, 56, 2 }, + [QCOM_RPM_PM8921_LDO20] = { 171, 85, 57, 2 }, + [QCOM_RPM_PM8921_LDO21] = { 173, 87, 58, 2 }, + [QCOM_RPM_PM8921_LDO22] = { 175, 89, 59, 2 }, + [QCOM_RPM_PM8921_LDO23] = { 177, 91, 60, 2 }, + [QCOM_RPM_PM8921_LDO24] = { 179, 93, 61, 2 }, + [QCOM_RPM_PM8921_LDO25] = { 181, 95, 62, 2 }, + [QCOM_RPM_PM8921_LDO26] = { 183, 97, 63, 2 }, + [QCOM_RPM_PM8921_LDO27] = { 185, 99, 64, 2 }, + [QCOM_RPM_PM8921_LDO28] = { 187, 101, 65, 2 }, + [QCOM_RPM_PM8921_LDO29] = { 189, 103, 66, 2 }, + [QCOM_RPM_PM8921_CLK1] = { 191, 105, 67, 2 }, + [QCOM_RPM_PM8921_CLK2] = { 193, 107, 68, 2 }, + [QCOM_RPM_PM8921_LVS1] = { 195, 109, 69, 1 }, + [QCOM_RPM_PM8921_LVS2] = { 196, 110, 70, 1 }, + [QCOM_RPM_PM8921_LVS3] = { 197, 111, 71, 1 }, + [QCOM_RPM_PM8921_LVS4] = { 198, 112, 72, 1 }, + [QCOM_RPM_PM8921_LVS5] = { 199, 113, 73, 1 }, + [QCOM_RPM_PM8921_LVS6] = { 200, 114, 74, 1 }, + [QCOM_RPM_PM8921_LVS7] = { 201, 115, 75, 1 }, + [QCOM_RPM_PM8921_NCP] = { 202, 116, 80, 2 }, + [QCOM_RPM_CXO_BUFFERS] = { 204, 118, 81, 1 }, + [QCOM_RPM_USB_OTG_SWITCH] = { 205, 119, 82, 1 }, + [QCOM_RPM_HDMI_SWITCH] = { 206, 120, 83, 1 }, + [QCOM_RPM_DDR_DMM] = { 207, 121, 84, 2 }, +}; + +static const struct qcom_rpm_data msm8960_template = { + .version = 3, + .resource_table = msm8960_rpm_resource_table, + .n_resources = ARRAY_SIZE(msm8960_rpm_resource_table), +}; + +static const struct of_device_id qcom_rpm_of_match[] = { + { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template }, + { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template }, + { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_rpm_of_match); + +int qcom_rpm_write(struct qcom_rpm *rpm, + int state, + int resource, + u32 *buf, size_t count) +{ + const struct qcom_rpm_resource *res; + const struct qcom_rpm_data *data = rpm->data; + u32 sel_mask[RPM_SELECT_SIZE] = { 0 }; + int left; + int ret = 0; + int i; + + if (WARN_ON(resource < 0 || resource >= data->n_resources)) + return -EINVAL; + + res = &data->resource_table[resource]; + if (WARN_ON(res->size != count)) + return -EINVAL; + + mutex_lock(&rpm->lock); + + for (i = 0; i < res->size; i++) + writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i)); + + bitmap_set((unsigned long *)sel_mask, res->select_id, 1); + for (i = 0; i < ARRAY_SIZE(sel_mask); i++) { + writel_relaxed(sel_mask[i], + RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i)); + } + + writel_relaxed(BIT(state), RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT)); + + reinit_completion(&rpm->ack); + regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit)); + + left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT); + if (!left) + ret = -ETIMEDOUT; + else if (rpm->ack_status & RPM_REJECTED) + ret = -EIO; + + mutex_unlock(&rpm->lock); + + return ret; +} +EXPORT_SYMBOL(qcom_rpm_write); + +static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev) +{ + struct qcom_rpm *rpm = dev; + u32 ack; + int i; + + ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT)); + for (i = 0; i < RPM_SELECT_SIZE; i++) + writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i)); + writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT)); + + if (ack & RPM_NOTIFICATION) { + dev_warn(rpm->dev, "ignoring notification!\n"); + } else { + rpm->ack_status = ack; + complete(&rpm->ack); + } + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev) +{ + struct qcom_rpm *rpm = dev; + + regmap_write(rpm->ipc_regmap, rpm->ipc_offset, BIT(rpm->ipc_bit)); + dev_err(rpm->dev, "RPM triggered fatal error\n"); + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev) +{ + return IRQ_HANDLED; +} + +static int qcom_rpm_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct device_node *syscon_np; + struct resource *res; + struct qcom_rpm *rpm; + u32 fw_version[3]; + int irq_wakeup; + int irq_ack; + int irq_err; + int ret; + + rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL); + if (!rpm) + return -ENOMEM; + + rpm->dev = &pdev->dev; + mutex_init(&rpm->lock); + init_completion(&rpm->ack); + + irq_ack = platform_get_irq_byname(pdev, "ack"); + if (irq_ack < 0) { + dev_err(&pdev->dev, "required ack interrupt missing\n"); + return irq_ack; + } + + irq_err = platform_get_irq_byname(pdev, "err"); + if (irq_err < 0) { + dev_err(&pdev->dev, "required err interrupt missing\n"); + return irq_err; + } + + irq_wakeup = platform_get_irq_byname(pdev, "wakeup"); + if (irq_wakeup < 0) { + dev_err(&pdev->dev, "required wakeup interrupt missing\n"); + return irq_wakeup; + } + + match = of_match_device(qcom_rpm_of_match, &pdev->dev); + rpm->data = match->data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + rpm->status_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rpm->status_regs)) + return PTR_ERR(rpm->status_regs); + rpm->ctrl_regs = rpm->status_regs + 0x400; + rpm->req_regs = rpm->status_regs + 0x600; + + syscon_np = of_parse_phandle(pdev->dev.of_node, "qcom,ipc", 0); + if (!syscon_np) { + dev_err(&pdev->dev, "no qcom,ipc node\n"); + return -ENODEV; + } + + rpm->ipc_regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(rpm->ipc_regmap)) + return PTR_ERR(rpm->ipc_regmap); + + ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 1, + &rpm->ipc_offset); + if (ret < 0) { + dev_err(&pdev->dev, "no offset in qcom,ipc\n"); + return -EINVAL; + } + + ret = of_property_read_u32_index(pdev->dev.of_node, "qcom,ipc", 2, + &rpm->ipc_bit); + if (ret < 0) { + dev_err(&pdev->dev, "no bit in qcom,ipc\n"); + return -EINVAL; + } + + dev_set_drvdata(&pdev->dev, rpm); + + fw_version[0] = readl(RPM_STATUS_REG(rpm, 0)); + fw_version[1] = readl(RPM_STATUS_REG(rpm, 1)); + fw_version[2] = readl(RPM_STATUS_REG(rpm, 2)); + if (fw_version[0] != rpm->data->version) { + dev_err(&pdev->dev, + "RPM version %u.%u.%u incompatible with driver version %u", + fw_version[0], + fw_version[1], + fw_version[2], + rpm->data->version); + return -EFAULT; + } + + dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0], + fw_version[1], + fw_version[2]); + + ret = devm_request_irq(&pdev->dev, + irq_ack, + qcom_rpm_ack_interrupt, + IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND, + "qcom_rpm_ack", + rpm); + if (ret) { + dev_err(&pdev->dev, "failed to request ack interrupt\n"); + return ret; + } + + ret = irq_set_irq_wake(irq_ack, 1); + if (ret) + dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n"); + + ret = devm_request_irq(&pdev->dev, + irq_err, + qcom_rpm_err_interrupt, + IRQF_TRIGGER_RISING, + "qcom_rpm_err", + rpm); + if (ret) { + dev_err(&pdev->dev, "failed to request err interrupt\n"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, + irq_wakeup, + qcom_rpm_wakeup_interrupt, + IRQF_TRIGGER_RISING, + "qcom_rpm_wakeup", + rpm); + if (ret) { + dev_err(&pdev->dev, "failed to request wakeup interrupt\n"); + return ret; + } + + ret = irq_set_irq_wake(irq_wakeup, 1); + if (ret) + dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n"); + + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); +} + +static int qcom_rpm_remove(struct platform_device *pdev) +{ + of_platform_depopulate(&pdev->dev); + return 0; +} + +static struct platform_driver qcom_rpm_driver = { + .probe = qcom_rpm_probe, + .remove = qcom_rpm_remove, + .driver = { + .name = "qcom_rpm", + .of_match_table = qcom_rpm_of_match, + }, +}; + +static int __init qcom_rpm_init(void) +{ + return platform_driver_register(&qcom_rpm_driver); +} +arch_initcall(qcom_rpm_init); + +static void __exit qcom_rpm_exit(void) +{ + platform_driver_unregister(&qcom_rpm_driver); +} +module_exit(qcom_rpm_exit) + +MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c index 663f8a37aa6b..2d64430c719b 100644 --- a/drivers/mfd/retu-mfd.c +++ b/drivers/mfd/retu-mfd.c @@ -222,7 +222,7 @@ static struct regmap_bus retu_bus = { .val_format_endian_default = REGMAP_ENDIAN_NATIVE, }; -static struct regmap_config retu_config = { +static const struct regmap_config retu_config = { .reg_bits = 8, .val_bits = 16, }; diff --git a/drivers/mfd/rt5033.c b/drivers/mfd/rt5033.c new file mode 100644 index 000000000000..db395a6c52bc --- /dev/null +++ b/drivers/mfd/rt5033.c @@ -0,0 +1,142 @@ +/* + * MFD core driver for the Richtek RT5033. + * + * RT5033 comprises multiple sub-devices switcing charger, fuel gauge, + * flash LED, current source, LDO and BUCK regulators. + * + * Copyright (C) 2014 Samsung Electronics, Co., Ltd. + * Author: Beomho Seo <beomho.seo@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published bythe Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/of_device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/rt5033.h> +#include <linux/mfd/rt5033-private.h> + +static const struct regmap_irq rt5033_irqs[] = { + { .mask = RT5033_PMIC_IRQ_BUCKOCP, }, + { .mask = RT5033_PMIC_IRQ_BUCKLV, }, + { .mask = RT5033_PMIC_IRQ_SAFELDOLV, }, + { .mask = RT5033_PMIC_IRQ_LDOLV, }, + { .mask = RT5033_PMIC_IRQ_OT, }, + { .mask = RT5033_PMIC_IRQ_VDDA_UV, }, +}; + +static const struct regmap_irq_chip rt5033_irq_chip = { + .name = "rt5033", + .status_base = RT5033_REG_PMIC_IRQ_STAT, + .mask_base = RT5033_REG_PMIC_IRQ_CTRL, + .mask_invert = true, + .num_regs = 1, + .irqs = rt5033_irqs, + .num_irqs = ARRAY_SIZE(rt5033_irqs), +}; + +static const struct mfd_cell rt5033_devs[] = { + { .name = "rt5033-regulator", }, + { + .name = "rt5033-charger", + .of_compatible = "richtek,rt5033-charger", + }, { + .name = "rt5033-battery", + .of_compatible = "richtek,rt5033-battery", + }, +}; + +static const struct regmap_config rt5033_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = RT5033_REG_END, +}; + +static int rt5033_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rt5033_dev *rt5033; + unsigned int dev_id; + int ret; + + rt5033 = devm_kzalloc(&i2c->dev, sizeof(*rt5033), GFP_KERNEL); + if (!rt5033) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt5033); + rt5033->dev = &i2c->dev; + rt5033->irq = i2c->irq; + rt5033->wakeup = true; + + rt5033->regmap = devm_regmap_init_i2c(i2c, &rt5033_regmap_config); + if (IS_ERR(rt5033->regmap)) { + dev_err(&i2c->dev, "Failed to allocate register map.\n"); + return PTR_ERR(rt5033->regmap); + } + + ret = regmap_read(rt5033->regmap, RT5033_REG_DEVICE_ID, &dev_id); + if (ret) { + dev_err(&i2c->dev, "Device not found\n"); + return -ENODEV; + } + dev_info(&i2c->dev, "Device found Device ID: %04x\n", dev_id); + + ret = regmap_add_irq_chip(rt5033->regmap, rt5033->irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + 0, &rt5033_irq_chip, &rt5033->irq_data); + if (ret) { + dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n", + rt5033->irq, ret); + return ret; + } + + ret = mfd_add_devices(rt5033->dev, -1, rt5033_devs, + ARRAY_SIZE(rt5033_devs), NULL, 0, + regmap_irq_get_domain(rt5033->irq_data)); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to add RT5033 child devices.\n"); + return ret; + } + + device_init_wakeup(rt5033->dev, rt5033->wakeup); + + return 0; +} + +static int rt5033_i2c_remove(struct i2c_client *i2c) +{ + mfd_remove_devices(&i2c->dev); + + return 0; +} + +static const struct i2c_device_id rt5033_i2c_id[] = { + { "rt5033", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt5033_i2c_id); + +static const struct of_device_id rt5033_dt_match[] = { + { .compatible = "richtek,rt5033", }, + { } +}; + +static struct i2c_driver rt5033_driver = { + .driver = { + .name = "rt5033", + .of_match_table = of_match_ptr(rt5033_dt_match), + }, + .probe = rt5033_i2c_probe, + .remove = rt5033_i2c_remove, + .id_table = rt5033_i2c_id, +}; +module_i2c_driver(rt5033_driver); + +MODULE_ALIAS("i2c:rt5033"); +MODULE_DESCRIPTION("Richtek RT5033 multi-function core driver"); +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c index 210d1f85679e..ede50244f265 100644 --- a/drivers/mfd/rtsx_usb.c +++ b/drivers/mfd/rtsx_usb.c @@ -681,9 +681,27 @@ static void rtsx_usb_disconnect(struct usb_interface *intf) #ifdef CONFIG_PM static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message) { + struct rtsx_ucr *ucr = + (struct rtsx_ucr *)usb_get_intfdata(intf); + u16 val = 0; + dev_dbg(&intf->dev, "%s called with pm message 0x%04x\n", __func__, message.event); + if (PMSG_IS_AUTO(message)) { + if (mutex_trylock(&ucr->dev_mutex)) { + rtsx_usb_get_card_status(ucr, &val); + mutex_unlock(&ucr->dev_mutex); + + /* Defer the autosuspend if card exists */ + if (val & (SD_CD | MS_CD)) + return -EAGAIN; + } else { + /* There is an ongoing operation*/ + return -EAGAIN; + } + } + return 0; } diff --git a/drivers/mfd/smsc-ece1099.c b/drivers/mfd/smsc-ece1099.c index 90112d4cc905..03246880d484 100644 --- a/drivers/mfd/smsc-ece1099.c +++ b/drivers/mfd/smsc-ece1099.c @@ -24,7 +24,7 @@ #include <linux/mfd/smsc.h> #include <linux/of_platform.h> -static struct regmap_config smsc_regmap_config = { +static const struct regmap_config smsc_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = SMSC_VEN_ID_H, diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c index 2f2e9f062571..191173166d65 100644 --- a/drivers/mfd/sun6i-prcm.c +++ b/drivers/mfd/sun6i-prcm.c @@ -41,6 +41,14 @@ static const struct resource sun6i_a31_apb0_gates_clk_res[] = { }, }; +static const struct resource sun6i_a31_ir_clk_res[] = { + { + .start = 0x54, + .end = 0x57, + .flags = IORESOURCE_MEM, + }, +}; + static const struct resource sun6i_a31_apb0_rstc_res[] = { { .start = 0xb0, @@ -69,6 +77,12 @@ static const struct mfd_cell sun6i_a31_prcm_subdevs[] = { .resources = sun6i_a31_apb0_gates_clk_res, }, { + .name = "sun6i-a31-ir-clk", + .of_compatible = "allwinner,sun4i-a10-mod0-clk", + .num_resources = ARRAY_SIZE(sun6i_a31_ir_clk_res), + .resources = sun6i_a31_ir_clk_res, + }, + { .name = "sun6i-a31-apb0-clock-reset", .of_compatible = "allwinner,sun6i-a31-clock-reset", .num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res), diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 80a919a8ca97..7d1cfc1d3ce0 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -145,7 +145,7 @@ int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, } EXPORT_SYMBOL_GPL(tps65217_clear_bits); -static struct regmap_config tps65217_regmap_config = { +static const struct regmap_config tps65217_regmap_config = { .reg_bits = 8, .val_bits = 8, diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c index d6b764349f9d..7af11a8b9753 100644 --- a/drivers/mfd/tps65218.c +++ b/drivers/mfd/tps65218.c @@ -135,7 +135,7 @@ static const struct regmap_access_table tps65218_volatile_table = { .n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges), }; -static struct regmap_config tps65218_regmap_config = { +static const struct regmap_config tps65218_regmap_config = { .reg_bits = 8, .val_bits = 8, .cache_type = REGCACHE_RBTREE, diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index db11b4f40611..489674a2497e 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -207,7 +207,7 @@ static struct twl_mapping twl4030_map[] = { { 2, TWL5031_BASEADD_INTERRUPTS }, }; -static struct reg_default twl4030_49_defaults[] = { +static const struct reg_default twl4030_49_defaults[] = { /* Audio Registers */ { 0x01, 0x00}, /* CODEC_MODE */ { 0x02, 0x00}, /* OPTION */ @@ -306,7 +306,7 @@ static const struct regmap_access_table twl4030_49_volatile_table = { .n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges), }; -static struct regmap_config twl4030_regmap_config[4] = { +static const struct regmap_config twl4030_regmap_config[4] = { { /* Address 0x48 */ .reg_bits = 8, @@ -369,7 +369,7 @@ static struct twl_mapping twl6030_map[] = { { 1, TWL6030_BASEADD_GASGAUGE }, }; -static struct regmap_config twl6030_regmap_config[3] = { +static const struct regmap_config twl6030_regmap_config[3] = { { /* Address 0x48 */ .reg_bits = 8, @@ -1087,7 +1087,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id) struct twl4030_platform_data *pdata = dev_get_platdata(&client->dev); struct device_node *node = client->dev.of_node; struct platform_device *pdev; - struct regmap_config *twl_regmap_config; + const struct regmap_config *twl_regmap_config; int irq_base = 0; int status; unsigned i, num_slaves; diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c index 9687645162ae..f71ee3dbc2a2 100644 --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -44,7 +44,7 @@ #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1) #define TWL6040_NUM_SUPPLIES (2) -static struct reg_default twl6040_defaults[] = { +static const struct reg_default twl6040_defaults[] = { { 0x01, 0x4B }, /* REG_ASICID (ro) */ { 0x02, 0x00 }, /* REG_ASICREV (ro) */ { 0x03, 0x00 }, /* REG_INTID */ @@ -580,7 +580,7 @@ static bool twl6040_writeable_reg(struct device *dev, unsigned int reg) } } -static struct regmap_config twl6040_regmap_config = { +static const struct regmap_config twl6040_regmap_config = { .reg_bits = 8, .val_bits = 8, diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 6ca9d25cc3f0..53ae5af5d6e4 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -36,12 +36,12 @@ static const struct mfd_cell wm8994_regulator_devs[] = { { .name = "wm8994-ldo", - .id = 1, + .id = 0, .pm_runtime_no_callbacks = true, }, { .name = "wm8994-ldo", - .id = 2, + .id = 1, .pm_runtime_no_callbacks = true, }, }; @@ -344,7 +344,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) dev_set_drvdata(wm8994->dev, wm8994); /* Add the on-chip regulators first for bootstrapping */ - ret = mfd_add_devices(wm8994->dev, -1, + ret = mfd_add_devices(wm8994->dev, 0, wm8994_regulator_devs, ARRAY_SIZE(wm8994_regulator_devs), NULL, 0, NULL); diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index e8647f7cf25e..00c5cc3d9546 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -205,6 +205,7 @@ static int rpm_reg_write(struct qcom_rpm_reg *vreg, vreg->val[req->word] |= value << req->shift; return qcom_rpm_write(vreg->rpm, + QCOM_RPM_ACTIVE_STATE, vreg->resource, vreg->val, vreg->parts->request_len); diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h new file mode 100644 index 000000000000..388a6f3d6165 --- /dev/null +++ b/include/dt-bindings/mfd/qcom-rpm.h @@ -0,0 +1,154 @@ +/* + * This header provides constants for the Qualcomm RPM bindings. + */ + +#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H +#define _DT_BINDINGS_MFD_QCOM_RPM_H + +/* + * Constants use to identify individual resources in the RPM. + */ +#define QCOM_RPM_APPS_FABRIC_ARB 1 +#define QCOM_RPM_APPS_FABRIC_CLK 2 +#define QCOM_RPM_APPS_FABRIC_HALT 3 +#define QCOM_RPM_APPS_FABRIC_IOCTL 4 +#define QCOM_RPM_APPS_FABRIC_MODE 5 +#define QCOM_RPM_APPS_L2_CACHE_CTL 6 +#define QCOM_RPM_CFPB_CLK 7 +#define QCOM_RPM_CXO_BUFFERS 8 +#define QCOM_RPM_CXO_CLK 9 +#define QCOM_RPM_DAYTONA_FABRIC_CLK 10 +#define QCOM_RPM_DDR_DMM 11 +#define QCOM_RPM_EBI1_CLK 12 +#define QCOM_RPM_HDMI_SWITCH 13 +#define QCOM_RPM_MMFPB_CLK 14 +#define QCOM_RPM_MM_FABRIC_ARB 15 +#define QCOM_RPM_MM_FABRIC_CLK 16 +#define QCOM_RPM_MM_FABRIC_HALT 17 +#define QCOM_RPM_MM_FABRIC_IOCTL 18 +#define QCOM_RPM_MM_FABRIC_MODE 19 +#define QCOM_RPM_PLL_4 20 +#define QCOM_RPM_PM8058_LDO0 21 +#define QCOM_RPM_PM8058_LDO1 22 +#define QCOM_RPM_PM8058_LDO2 23 +#define QCOM_RPM_PM8058_LDO3 24 +#define QCOM_RPM_PM8058_LDO4 25 +#define QCOM_RPM_PM8058_LDO5 26 +#define QCOM_RPM_PM8058_LDO6 27 +#define QCOM_RPM_PM8058_LDO7 28 +#define QCOM_RPM_PM8058_LDO8 29 +#define QCOM_RPM_PM8058_LDO9 30 +#define QCOM_RPM_PM8058_LDO10 31 +#define QCOM_RPM_PM8058_LDO11 32 +#define QCOM_RPM_PM8058_LDO12 33 +#define QCOM_RPM_PM8058_LDO13 34 +#define QCOM_RPM_PM8058_LDO14 35 +#define QCOM_RPM_PM8058_LDO15 36 +#define QCOM_RPM_PM8058_LDO16 37 +#define QCOM_RPM_PM8058_LDO17 38 +#define QCOM_RPM_PM8058_LDO18 39 +#define QCOM_RPM_PM8058_LDO19 40 +#define QCOM_RPM_PM8058_LDO20 41 +#define QCOM_RPM_PM8058_LDO21 42 +#define QCOM_RPM_PM8058_LDO22 43 +#define QCOM_RPM_PM8058_LDO23 44 +#define QCOM_RPM_PM8058_LDO24 45 +#define QCOM_RPM_PM8058_LDO25 46 +#define QCOM_RPM_PM8058_LVS0 47 +#define QCOM_RPM_PM8058_LVS1 48 +#define QCOM_RPM_PM8058_NCP 49 +#define QCOM_RPM_PM8058_SMPS0 50 +#define QCOM_RPM_PM8058_SMPS1 51 +#define QCOM_RPM_PM8058_SMPS2 52 +#define QCOM_RPM_PM8058_SMPS3 53 +#define QCOM_RPM_PM8058_SMPS4 54 +#define QCOM_RPM_PM8821_LDO1 55 +#define QCOM_RPM_PM8821_SMPS1 56 +#define QCOM_RPM_PM8821_SMPS2 57 +#define QCOM_RPM_PM8901_LDO0 58 +#define QCOM_RPM_PM8901_LDO1 59 +#define QCOM_RPM_PM8901_LDO2 60 +#define QCOM_RPM_PM8901_LDO3 61 +#define QCOM_RPM_PM8901_LDO4 62 +#define QCOM_RPM_PM8901_LDO5 63 +#define QCOM_RPM_PM8901_LDO6 64 +#define QCOM_RPM_PM8901_LVS0 65 +#define QCOM_RPM_PM8901_LVS1 66 +#define QCOM_RPM_PM8901_LVS2 67 +#define QCOM_RPM_PM8901_LVS3 68 +#define QCOM_RPM_PM8901_MVS 69 +#define QCOM_RPM_PM8901_SMPS0 70 +#define QCOM_RPM_PM8901_SMPS1 71 +#define QCOM_RPM_PM8901_SMPS2 72 +#define QCOM_RPM_PM8901_SMPS3 73 +#define QCOM_RPM_PM8901_SMPS4 74 +#define QCOM_RPM_PM8921_CLK1 75 +#define QCOM_RPM_PM8921_CLK2 76 +#define QCOM_RPM_PM8921_LDO1 77 +#define QCOM_RPM_PM8921_LDO2 78 +#define QCOM_RPM_PM8921_LDO3 79 +#define QCOM_RPM_PM8921_LDO4 80 +#define QCOM_RPM_PM8921_LDO5 81 +#define QCOM_RPM_PM8921_LDO6 82 +#define QCOM_RPM_PM8921_LDO7 83 +#define QCOM_RPM_PM8921_LDO8 84 +#define QCOM_RPM_PM8921_LDO9 85 +#define QCOM_RPM_PM8921_LDO10 86 +#define QCOM_RPM_PM8921_LDO11 87 +#define QCOM_RPM_PM8921_LDO12 88 +#define QCOM_RPM_PM8921_LDO13 89 +#define QCOM_RPM_PM8921_LDO14 90 +#define QCOM_RPM_PM8921_LDO15 91 +#define QCOM_RPM_PM8921_LDO16 92 +#define QCOM_RPM_PM8921_LDO17 93 +#define QCOM_RPM_PM8921_LDO18 94 +#define QCOM_RPM_PM8921_LDO19 95 +#define QCOM_RPM_PM8921_LDO20 96 +#define QCOM_RPM_PM8921_LDO21 97 +#define QCOM_RPM_PM8921_LDO22 98 +#define QCOM_RPM_PM8921_LDO23 99 +#define QCOM_RPM_PM8921_LDO24 100 +#define QCOM_RPM_PM8921_LDO25 101 +#define QCOM_RPM_PM8921_LDO26 102 +#define QCOM_RPM_PM8921_LDO27 103 +#define QCOM_RPM_PM8921_LDO28 104 +#define QCOM_RPM_PM8921_LDO29 105 +#define QCOM_RPM_PM8921_LVS1 106 +#define QCOM_RPM_PM8921_LVS2 107 +#define QCOM_RPM_PM8921_LVS3 108 +#define QCOM_RPM_PM8921_LVS4 109 +#define QCOM_RPM_PM8921_LVS5 110 +#define QCOM_RPM_PM8921_LVS6 111 +#define QCOM_RPM_PM8921_LVS7 112 +#define QCOM_RPM_PM8921_MVS 113 +#define QCOM_RPM_PM8921_NCP 114 +#define QCOM_RPM_PM8921_SMPS1 115 +#define QCOM_RPM_PM8921_SMPS2 116 +#define QCOM_RPM_PM8921_SMPS3 117 +#define QCOM_RPM_PM8921_SMPS4 118 +#define QCOM_RPM_PM8921_SMPS5 119 +#define QCOM_RPM_PM8921_SMPS6 120 +#define QCOM_RPM_PM8921_SMPS7 121 +#define QCOM_RPM_PM8921_SMPS8 122 +#define QCOM_RPM_PXO_CLK 123 +#define QCOM_RPM_QDSS_CLK 124 +#define QCOM_RPM_SFPB_CLK 125 +#define QCOM_RPM_SMI_CLK 126 +#define QCOM_RPM_SYS_FABRIC_ARB 127 +#define QCOM_RPM_SYS_FABRIC_CLK 128 +#define QCOM_RPM_SYS_FABRIC_HALT 129 +#define QCOM_RPM_SYS_FABRIC_IOCTL 130 +#define QCOM_RPM_SYS_FABRIC_MODE 131 +#define QCOM_RPM_USB_OTG_SWITCH 132 +#define QCOM_RPM_VDDMIN_GPIO 133 + +/* + * Constants used to select force mode for regulators. + */ +#define QCOM_RPM_FORCE_MODE_NONE 0 +#define QCOM_RPM_FORCE_MODE_LPM 1 +#define QCOM_RPM_FORCE_MODE_HPM 2 +#define QCOM_RPM_FORCE_MODE_AUTO 3 +#define QCOM_RPM_FORCE_MODE_BYPASS 4 + +#endif diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 81589d176ae8..dfabd6db7ddf 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -124,10 +124,27 @@ enum { #define AXP288_PMIC_ADC_H 0x56 #define AXP288_PMIC_ADC_L 0x57 #define AXP288_ADC_TS_PIN_CTRL 0x84 - #define AXP288_PMIC_ADC_EN 0x84 -#define AXP288_FG_TUNE5 0xed +/* Fuel Gauge */ +#define AXP288_FG_RDC1_REG 0xba +#define AXP288_FG_RDC0_REG 0xbb +#define AXP288_FG_OCVH_REG 0xbc +#define AXP288_FG_OCVL_REG 0xbd +#define AXP288_FG_OCV_CURVE_REG 0xc0 +#define AXP288_FG_DES_CAP1_REG 0xe0 +#define AXP288_FG_DES_CAP0_REG 0xe1 +#define AXP288_FG_CC_MTR1_REG 0xe2 +#define AXP288_FG_CC_MTR0_REG 0xe3 +#define AXP288_FG_OCV_CAP_REG 0xe4 +#define AXP288_FG_CC_CAP_REG 0xe5 +#define AXP288_FG_LOW_CAP_REG 0xe6 +#define AXP288_FG_TUNE0 0xe8 +#define AXP288_FG_TUNE1 0xe9 +#define AXP288_FG_TUNE2 0xea +#define AXP288_FG_TUNE3 0xeb +#define AXP288_FG_TUNE4 0xec +#define AXP288_FG_TUNE5 0xed /* Regulators IDs */ enum { @@ -236,4 +253,26 @@ struct axp20x_dev { const struct regmap_irq_chip *regmap_irq_chip; }; +#define BATTID_LEN 64 +#define OCV_CURVE_SIZE 32 +#define MAX_THERM_CURVE_SIZE 25 +#define PD_DEF_MIN_TEMP 0 +#define PD_DEF_MAX_TEMP 55 + +struct axp20x_fg_pdata { + char battid[BATTID_LEN + 1]; + int design_cap; + int min_volt; + int max_volt; + int max_temp; + int min_temp; + int cap1; + int cap0; + int rdc1; + int rdc0; + int ocv_curve[OCV_CURVE_SIZE]; + int tcsz; + int thermistor_curve[MAX_THERM_CURVE_SIZE][2]; +}; + #endif /* __LINUX_MFD_AXP20X_H */ diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h index b92a3262f8f6..79f4d822ba13 100644 --- a/include/linux/mfd/da9063/core.h +++ b/include/linux/mfd/da9063/core.h @@ -36,6 +36,7 @@ enum da9063_models { enum da9063_variant_codes { PMIC_DA9063_AD = 0x3, PMIC_DA9063_BB = 0x5, + PMIC_DA9063_CA = 0x6, }; /* Interrupts */ diff --git a/include/linux/mfd/da9150/core.h b/include/linux/mfd/da9150/core.h new file mode 100644 index 000000000000..76e668933a77 --- /dev/null +++ b/include/linux/mfd/da9150/core.h @@ -0,0 +1,68 @@ +/* + * DA9150 MFD Driver - Core Data + * + * Copyright (c) 2014 Dialog Semiconductor + * + * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __DA9150_CORE_H +#define __DA9150_CORE_H + +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> + +/* I2C address paging */ +#define DA9150_REG_PAGE_SHIFT 8 +#define DA9150_REG_PAGE_MASK 0xFF + +/* IRQs */ +#define DA9150_NUM_IRQ_REGS 4 +#define DA9150_IRQ_VBUS 0 +#define DA9150_IRQ_CHG 1 +#define DA9150_IRQ_TCLASS 2 +#define DA9150_IRQ_TJUNC 3 +#define DA9150_IRQ_VFAULT 4 +#define DA9150_IRQ_CONF 5 +#define DA9150_IRQ_DAT 6 +#define DA9150_IRQ_DTYPE 7 +#define DA9150_IRQ_ID 8 +#define DA9150_IRQ_ADP 9 +#define DA9150_IRQ_SESS_END 10 +#define DA9150_IRQ_SESS_VLD 11 +#define DA9150_IRQ_FG 12 +#define DA9150_IRQ_GP 13 +#define DA9150_IRQ_TBAT 14 +#define DA9150_IRQ_GPIOA 15 +#define DA9150_IRQ_GPIOB 16 +#define DA9150_IRQ_GPIOC 17 +#define DA9150_IRQ_GPIOD 18 +#define DA9150_IRQ_GPADC 19 +#define DA9150_IRQ_WKUP 20 + +struct da9150_pdata { + int irq_base; +}; + +struct da9150 { + struct device *dev; + struct regmap *regmap; + struct regmap_irq_chip_data *regmap_irq_data; + int irq; + int irq_base; +}; + +/* Device I/O */ +u8 da9150_reg_read(struct da9150 *da9150, u16 reg); +void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val); +void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val); + +void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf); +void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf); +#endif /* __DA9150_CORE_H */ diff --git a/include/linux/mfd/da9150/registers.h b/include/linux/mfd/da9150/registers.h new file mode 100644 index 000000000000..27ca6ee4d840 --- /dev/null +++ b/include/linux/mfd/da9150/registers.h @@ -0,0 +1,1155 @@ +/* + * DA9150 MFD Driver - Registers + * + * Copyright (c) 2014 Dialog Semiconductor + * + * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __DA9150_REGISTERS_H +#define __DA9150_REGISTERS_H + +#include <linux/bitops.h> + +/* Registers */ +#define DA9150_PAGE_CON 0x000 +#define DA9150_STATUS_A 0x068 +#define DA9150_STATUS_B 0x069 +#define DA9150_STATUS_C 0x06A +#define DA9150_STATUS_D 0x06B +#define DA9150_STATUS_E 0x06C +#define DA9150_STATUS_F 0x06D +#define DA9150_STATUS_G 0x06E +#define DA9150_STATUS_H 0x06F +#define DA9150_STATUS_I 0x070 +#define DA9150_STATUS_J 0x071 +#define DA9150_STATUS_K 0x072 +#define DA9150_STATUS_L 0x073 +#define DA9150_STATUS_N 0x074 +#define DA9150_FAULT_LOG_A 0x076 +#define DA9150_FAULT_LOG_B 0x077 +#define DA9150_EVENT_E 0x078 +#define DA9150_EVENT_F 0x079 +#define DA9150_EVENT_G 0x07A +#define DA9150_EVENT_H 0x07B +#define DA9150_IRQ_MASK_E 0x07C +#define DA9150_IRQ_MASK_F 0x07D +#define DA9150_IRQ_MASK_G 0x07E +#define DA9150_IRQ_MASK_H 0x07F +#define DA9150_PAGE_CON_1 0x080 +#define DA9150_CONFIG_A 0x0E0 +#define DA9150_CONFIG_B 0x0E1 +#define DA9150_CONFIG_C 0x0E2 +#define DA9150_CONFIG_D 0x0E3 +#define DA9150_CONFIG_E 0x0E4 +#define DA9150_CONTROL_A 0x0E5 +#define DA9150_CONTROL_B 0x0E6 +#define DA9150_CONTROL_C 0x0E7 +#define DA9150_GPIO_A_B 0x0E8 +#define DA9150_GPIO_C_D 0x0E9 +#define DA9150_GPIO_MODE_CONT 0x0EA +#define DA9150_GPIO_CTRL_B 0x0EB +#define DA9150_GPIO_CTRL_A 0x0EC +#define DA9150_GPIO_CTRL_C 0x0ED +#define DA9150_GPIO_CFG_A 0x0EE +#define DA9150_GPIO_CFG_B 0x0EF +#define DA9150_GPIO_CFG_C 0x0F0 +#define DA9150_GPADC_MAN 0x0F2 +#define DA9150_GPADC_RES_A 0x0F4 +#define DA9150_GPADC_RES_B 0x0F5 +#define DA9150_PAGE_CON_2 0x100 +#define DA9150_OTP_CONT_SHARED 0x101 +#define DA9150_INTERFACE_SHARED 0x105 +#define DA9150_CONFIG_A_SHARED 0x106 +#define DA9150_CONFIG_D_SHARED 0x109 +#define DA9150_ADETVB_CFG_C 0x150 +#define DA9150_ADETD_STAT 0x151 +#define DA9150_ADET_CMPSTAT 0x152 +#define DA9150_ADET_CTRL_A 0x153 +#define DA9150_ADETVB_CFG_B 0x154 +#define DA9150_ADETVB_CFG_A 0x155 +#define DA9150_ADETAC_CFG_A 0x156 +#define DA9150_ADDETAC_CFG_B 0x157 +#define DA9150_ADETAC_CFG_C 0x158 +#define DA9150_ADETAC_CFG_D 0x159 +#define DA9150_ADETVB_CFG_D 0x15A +#define DA9150_ADETID_CFG_A 0x15B +#define DA9150_ADET_RID_PT_CHG_H 0x15C +#define DA9150_ADET_RID_PT_CHG_L 0x15D +#define DA9150_PPR_TCTR_B 0x160 +#define DA9150_PPR_BKCTRL_A 0x163 +#define DA9150_PPR_BKCFG_A 0x164 +#define DA9150_PPR_BKCFG_B 0x165 +#define DA9150_PPR_CHGCTRL_A 0x166 +#define DA9150_PPR_CHGCTRL_B 0x167 +#define DA9150_PPR_CHGCTRL_C 0x168 +#define DA9150_PPR_TCTR_A 0x169 +#define DA9150_PPR_CHGCTRL_D 0x16A +#define DA9150_PPR_CHGCTRL_E 0x16B +#define DA9150_PPR_CHGCTRL_F 0x16C +#define DA9150_PPR_CHGCTRL_G 0x16D +#define DA9150_PPR_CHGCTRL_H 0x16E +#define DA9150_PPR_CHGCTRL_I 0x16F +#define DA9150_PPR_CHGCTRL_J 0x170 +#define DA9150_PPR_CHGCTRL_K 0x171 +#define DA9150_PPR_CHGCTRL_L 0x172 +#define DA9150_PPR_CHGCTRL_M 0x173 +#define DA9150_PPR_THYST_A 0x174 +#define DA9150_PPR_THYST_B 0x175 +#define DA9150_PPR_THYST_C 0x176 +#define DA9150_PPR_THYST_D 0x177 +#define DA9150_PPR_THYST_E 0x178 +#define DA9150_PPR_THYST_F 0x179 +#define DA9150_PPR_THYST_G 0x17A +#define DA9150_PAGE_CON_3 0x180 +#define DA9150_PAGE_CON_4 0x200 +#define DA9150_PAGE_CON_5 0x280 +#define DA9150_PAGE_CON_6 0x300 +#define DA9150_COREBTLD_STAT_A 0x302 +#define DA9150_COREBTLD_CTRL_A 0x303 +#define DA9150_CORE_CONFIG_A 0x304 +#define DA9150_CORE_CONFIG_C 0x305 +#define DA9150_CORE_CONFIG_B 0x306 +#define DA9150_CORE_CFG_DATA_A 0x307 +#define DA9150_CORE_CFG_DATA_B 0x308 +#define DA9150_CORE_CMD_A 0x309 +#define DA9150_CORE_DATA_A 0x30A +#define DA9150_CORE_DATA_B 0x30B +#define DA9150_CORE_DATA_C 0x30C +#define DA9150_CORE_DATA_D 0x30D +#define DA9150_CORE2WIRE_STAT_A 0x310 +#define DA9150_CORE2WIRE_CTRL_A 0x311 +#define DA9150_FW_CTRL_A 0x312 +#define DA9150_FW_CTRL_C 0x313 +#define DA9150_FW_CTRL_D 0x314 +#define DA9150_FG_CTRL_A 0x315 +#define DA9150_FG_CTRL_B 0x316 +#define DA9150_FW_CTRL_E 0x317 +#define DA9150_FW_CTRL_B 0x318 +#define DA9150_GPADC_CMAN 0x320 +#define DA9150_GPADC_CRES_A 0x322 +#define DA9150_GPADC_CRES_B 0x323 +#define DA9150_CC_CFG_A 0x328 +#define DA9150_CC_CFG_B 0x329 +#define DA9150_CC_ICHG_RES_A 0x32A +#define DA9150_CC_ICHG_RES_B 0x32B +#define DA9150_CC_IAVG_RES_A 0x32C +#define DA9150_CC_IAVG_RES_B 0x32D +#define DA9150_TAUX_CTRL_A 0x330 +#define DA9150_TAUX_RELOAD_H 0x332 +#define DA9150_TAUX_RELOAD_L 0x333 +#define DA9150_TAUX_VALUE_H 0x334 +#define DA9150_TAUX_VALUE_L 0x335 +#define DA9150_AUX_DATA_0 0x338 +#define DA9150_AUX_DATA_1 0x339 +#define DA9150_AUX_DATA_2 0x33A +#define DA9150_AUX_DATA_3 0x33B +#define DA9150_BIF_CTRL 0x340 +#define DA9150_TBAT_CTRL_A 0x342 +#define DA9150_TBAT_CTRL_B 0x343 +#define DA9150_TBAT_RES_A 0x344 +#define DA9150_TBAT_RES_B 0x345 + +/* DA9150_PAGE_CON = 0x000 */ +#define DA9150_PAGE_SHIFT 0 +#define DA9150_PAGE_MASK (0x3f << 0) +#define DA9150_I2C_PAGE_SHIFT 1 +#define DA9150_I2C_PAGE_MASK (0x1f << 1) +#define DA9150_WRITE_MODE_SHIFT 6 +#define DA9150_WRITE_MODE_MASK BIT(6) +#define DA9150_REVERT_SHIFT 7 +#define DA9150_REVERT_MASK BIT(7) + +/* DA9150_STATUS_A = 0x068 */ +#define DA9150_WKUP_STAT_SHIFT 2 +#define DA9150_WKUP_STAT_MASK (0x0f << 2) +#define DA9150_SLEEP_STAT_SHIFT 6 +#define DA9150_SLEEP_STAT_MASK (0x03 << 6) + +/* DA9150_STATUS_B = 0x069 */ +#define DA9150_VFAULT_STAT_SHIFT 0 +#define DA9150_VFAULT_STAT_MASK BIT(0) +#define DA9150_TFAULT_STAT_SHIFT 1 +#define DA9150_TFAULT_STAT_MASK BIT(1) + +/* DA9150_STATUS_C = 0x06A */ +#define DA9150_VDD33_STAT_SHIFT 0 +#define DA9150_VDD33_STAT_MASK BIT(0) +#define DA9150_VDD33_SLEEP_SHIFT 1 +#define DA9150_VDD33_SLEEP_MASK BIT(1) +#define DA9150_LFOSC_STAT_SHIFT 7 +#define DA9150_LFOSC_STAT_MASK BIT(7) + +/* DA9150_STATUS_D = 0x06B */ +#define DA9150_GPIOA_STAT_SHIFT 0 +#define DA9150_GPIOA_STAT_MASK BIT(0) +#define DA9150_GPIOB_STAT_SHIFT 1 +#define DA9150_GPIOB_STAT_MASK BIT(1) +#define DA9150_GPIOC_STAT_SHIFT 2 +#define DA9150_GPIOC_STAT_MASK BIT(2) +#define DA9150_GPIOD_STAT_SHIFT 3 +#define DA9150_GPIOD_STAT_MASK BIT(3) + +/* DA9150_STATUS_E = 0x06C */ +#define DA9150_DTYPE_SHIFT 0 +#define DA9150_DTYPE_MASK (0x1f << 0) +#define DA9150_DTYPE_DT_NIL (0x00 << 0) +#define DA9150_DTYPE_DT_USB_OTG BIT(0) +#define DA9150_DTYPE_DT_USB_STD (0x02 << 0) +#define DA9150_DTYPE_DT_USB_CHG (0x03 << 0) +#define DA9150_DTYPE_DT_ACA_CHG (0x04 << 0) +#define DA9150_DTYPE_DT_ACA_OTG (0x05 << 0) +#define DA9150_DTYPE_DT_ACA_DOC (0x06 << 0) +#define DA9150_DTYPE_DT_DED_CHG (0x07 << 0) +#define DA9150_DTYPE_DT_CR5_CHG (0x08 << 0) +#define DA9150_DTYPE_DT_CR4_CHG (0x0c << 0) +#define DA9150_DTYPE_DT_PT_CHG (0x11 << 0) +#define DA9150_DTYPE_DT_NN_ACC (0x16 << 0) +#define DA9150_DTYPE_DT_NN_CHG (0x17 << 0) + +/* DA9150_STATUS_F = 0x06D */ +#define DA9150_SESS_VLD_SHIFT 0 +#define DA9150_SESS_VLD_MASK BIT(0) +#define DA9150_ID_ERR_SHIFT 1 +#define DA9150_ID_ERR_MASK BIT(1) +#define DA9150_PT_CHG_SHIFT 2 +#define DA9150_PT_CHG_MASK BIT(2) + +/* DA9150_STATUS_G = 0x06E */ +#define DA9150_RID_SHIFT 0 +#define DA9150_RID_MASK (0xff << 0) + +/* DA9150_STATUS_H = 0x06F */ +#define DA9150_VBUS_STAT_SHIFT 0 +#define DA9150_VBUS_STAT_MASK (0x07 << 0) +#define DA9150_VBUS_STAT_OFF (0x00 << 0) +#define DA9150_VBUS_STAT_WAIT BIT(0) +#define DA9150_VBUS_STAT_CHG (0x02 << 0) +#define DA9150_VBUS_TRED_SHIFT 3 +#define DA9150_VBUS_TRED_MASK BIT(3) +#define DA9150_VBUS_DROP_STAT_SHIFT 4 +#define DA9150_VBUS_DROP_STAT_MASK (0x0f << 4) + +/* DA9150_STATUS_I = 0x070 */ +#define DA9150_VBUS_ISET_STAT_SHIFT 0 +#define DA9150_VBUS_ISET_STAT_MASK (0x1f << 0) +#define DA9150_VBUS_OT_SHIFT 7 +#define DA9150_VBUS_OT_MASK BIT(7) + +/* DA9150_STATUS_J = 0x071 */ +#define DA9150_CHG_STAT_SHIFT 0 +#define DA9150_CHG_STAT_MASK (0x0f << 0) +#define DA9150_CHG_STAT_OFF (0x00 << 0) +#define DA9150_CHG_STAT_SUSP BIT(0) +#define DA9150_CHG_STAT_ACT (0x02 << 0) +#define DA9150_CHG_STAT_PRE (0x03 << 0) +#define DA9150_CHG_STAT_CC (0x04 << 0) +#define DA9150_CHG_STAT_CV (0x05 << 0) +#define DA9150_CHG_STAT_FULL (0x06 << 0) +#define DA9150_CHG_STAT_TEMP (0x07 << 0) +#define DA9150_CHG_STAT_TIME (0x08 << 0) +#define DA9150_CHG_STAT_BAT (0x09 << 0) +#define DA9150_CHG_TEMP_SHIFT 4 +#define DA9150_CHG_TEMP_MASK (0x07 << 4) +#define DA9150_CHG_TEMP_UNDER (0x06 << 4) +#define DA9150_CHG_TEMP_OVER (0x07 << 4) +#define DA9150_CHG_IEND_STAT_SHIFT 7 +#define DA9150_CHG_IEND_STAT_MASK BIT(7) + +/* DA9150_STATUS_K = 0x072 */ +#define DA9150_CHG_IAV_H_SHIFT 0 +#define DA9150_CHG_IAV_H_MASK (0xff << 0) + +/* DA9150_STATUS_L = 0x073 */ +#define DA9150_CHG_IAV_L_SHIFT 5 +#define DA9150_CHG_IAV_L_MASK (0x07 << 5) + +/* DA9150_STATUS_N = 0x074 */ +#define DA9150_CHG_TIME_SHIFT 1 +#define DA9150_CHG_TIME_MASK BIT(1) +#define DA9150_CHG_TRED_SHIFT 2 +#define DA9150_CHG_TRED_MASK BIT(2) +#define DA9150_CHG_TJUNC_CLASS_SHIFT 3 +#define DA9150_CHG_TJUNC_CLASS_MASK (0x07 << 3) +#define DA9150_CHG_TJUNC_CLASS_6 (0x06 << 3) +#define DA9150_EBS_STAT_SHIFT 6 +#define DA9150_EBS_STAT_MASK BIT(6) +#define DA9150_CHG_BAT_REMOVED_SHIFT 7 +#define DA9150_CHG_BAT_REMOVED_MASK BIT(7) + +/* DA9150_FAULT_LOG_A = 0x076 */ +#define DA9150_TEMP_FAULT_SHIFT 0 +#define DA9150_TEMP_FAULT_MASK BIT(0) +#define DA9150_VSYS_FAULT_SHIFT 1 +#define DA9150_VSYS_FAULT_MASK BIT(1) +#define DA9150_START_FAULT_SHIFT 2 +#define DA9150_START_FAULT_MASK BIT(2) +#define DA9150_EXT_FAULT_SHIFT 3 +#define DA9150_EXT_FAULT_MASK BIT(3) +#define DA9150_POR_FAULT_SHIFT 4 +#define DA9150_POR_FAULT_MASK BIT(4) + +/* DA9150_FAULT_LOG_B = 0x077 */ +#define DA9150_VBUS_FAULT_SHIFT 0 +#define DA9150_VBUS_FAULT_MASK BIT(0) +#define DA9150_OTG_FAULT_SHIFT 1 +#define DA9150_OTG_FAULT_MASK BIT(1) + +/* DA9150_EVENT_E = 0x078 */ +#define DA9150_E_VBUS_SHIFT 0 +#define DA9150_E_VBUS_MASK BIT(0) +#define DA9150_E_CHG_SHIFT 1 +#define DA9150_E_CHG_MASK BIT(1) +#define DA9150_E_TCLASS_SHIFT 2 +#define DA9150_E_TCLASS_MASK BIT(2) +#define DA9150_E_TJUNC_SHIFT 3 +#define DA9150_E_TJUNC_MASK BIT(3) +#define DA9150_E_VFAULT_SHIFT 4 +#define DA9150_E_VFAULT_MASK BIT(4) +#define DA9150_EVENTS_H_SHIFT 5 +#define DA9150_EVENTS_H_MASK BIT(5) +#define DA9150_EVENTS_G_SHIFT 6 +#define DA9150_EVENTS_G_MASK BIT(6) +#define DA9150_EVENTS_F_SHIFT 7 +#define DA9150_EVENTS_F_MASK BIT(7) + +/* DA9150_EVENT_F = 0x079 */ +#define DA9150_E_CONF_SHIFT 0 +#define DA9150_E_CONF_MASK BIT(0) +#define DA9150_E_DAT_SHIFT 1 +#define DA9150_E_DAT_MASK BIT(1) +#define DA9150_E_DTYPE_SHIFT 3 +#define DA9150_E_DTYPE_MASK BIT(3) +#define DA9150_E_ID_SHIFT 4 +#define DA9150_E_ID_MASK BIT(4) +#define DA9150_E_ADP_SHIFT 5 +#define DA9150_E_ADP_MASK BIT(5) +#define DA9150_E_SESS_END_SHIFT 6 +#define DA9150_E_SESS_END_MASK BIT(6) +#define DA9150_E_SESS_VLD_SHIFT 7 +#define DA9150_E_SESS_VLD_MASK BIT(7) + +/* DA9150_EVENT_G = 0x07A */ +#define DA9150_E_FG_SHIFT 0 +#define DA9150_E_FG_MASK BIT(0) +#define DA9150_E_GP_SHIFT 1 +#define DA9150_E_GP_MASK BIT(1) +#define DA9150_E_TBAT_SHIFT 2 +#define DA9150_E_TBAT_MASK BIT(2) +#define DA9150_E_GPIOA_SHIFT 3 +#define DA9150_E_GPIOA_MASK BIT(3) +#define DA9150_E_GPIOB_SHIFT 4 +#define DA9150_E_GPIOB_MASK BIT(4) +#define DA9150_E_GPIOC_SHIFT 5 +#define DA9150_E_GPIOC_MASK BIT(5) +#define DA9150_E_GPIOD_SHIFT 6 +#define DA9150_E_GPIOD_MASK BIT(6) +#define DA9150_E_GPADC_SHIFT 7 +#define DA9150_E_GPADC_MASK BIT(7) + +/* DA9150_EVENT_H = 0x07B */ +#define DA9150_E_WKUP_SHIFT 0 +#define DA9150_E_WKUP_MASK BIT(0) + +/* DA9150_IRQ_MASK_E = 0x07C */ +#define DA9150_M_VBUS_SHIFT 0 +#define DA9150_M_VBUS_MASK BIT(0) +#define DA9150_M_CHG_SHIFT 1 +#define DA9150_M_CHG_MASK BIT(1) +#define DA9150_M_TJUNC_SHIFT 3 +#define DA9150_M_TJUNC_MASK BIT(3) +#define DA9150_M_VFAULT_SHIFT 4 +#define DA9150_M_VFAULT_MASK BIT(4) + +/* DA9150_IRQ_MASK_F = 0x07D */ +#define DA9150_M_CONF_SHIFT 0 +#define DA9150_M_CONF_MASK BIT(0) +#define DA9150_M_DAT_SHIFT 1 +#define DA9150_M_DAT_MASK BIT(1) +#define DA9150_M_DTYPE_SHIFT 3 +#define DA9150_M_DTYPE_MASK BIT(3) +#define DA9150_M_ID_SHIFT 4 +#define DA9150_M_ID_MASK BIT(4) +#define DA9150_M_ADP_SHIFT 5 +#define DA9150_M_ADP_MASK BIT(5) +#define DA9150_M_SESS_END_SHIFT 6 +#define DA9150_M_SESS_END_MASK BIT(6) +#define DA9150_M_SESS_VLD_SHIFT 7 +#define DA9150_M_SESS_VLD_MASK BIT(7) + +/* DA9150_IRQ_MASK_G = 0x07E */ +#define DA9150_M_FG_SHIFT 0 +#define DA9150_M_FG_MASK BIT(0) +#define DA9150_M_GP_SHIFT 1 +#define DA9150_M_GP_MASK BIT(1) +#define DA9150_M_TBAT_SHIFT 2 +#define DA9150_M_TBAT_MASK BIT(2) +#define DA9150_M_GPIOA_SHIFT 3 +#define DA9150_M_GPIOA_MASK BIT(3) +#define DA9150_M_GPIOB_SHIFT 4 +#define DA9150_M_GPIOB_MASK BIT(4) +#define DA9150_M_GPIOC_SHIFT 5 +#define DA9150_M_GPIOC_MASK BIT(5) +#define DA9150_M_GPIOD_SHIFT 6 +#define DA9150_M_GPIOD_MASK BIT(6) +#define DA9150_M_GPADC_SHIFT 7 +#define DA9150_M_GPADC_MASK BIT(7) + +/* DA9150_IRQ_MASK_H = 0x07F */ +#define DA9150_M_WKUP_SHIFT 0 +#define DA9150_M_WKUP_MASK BIT(0) + +/* DA9150_PAGE_CON_1 = 0x080 */ +#define DA9150_PAGE_SHIFT 0 +#define DA9150_PAGE_MASK (0x3f << 0) +#define DA9150_WRITE_MODE_SHIFT 6 +#define DA9150_WRITE_MODE_MASK BIT(6) +#define DA9150_REVERT_SHIFT 7 +#define DA9150_REVERT_MASK BIT(7) + +/* DA9150_CONFIG_A = 0x0E0 */ +#define DA9150_RESET_DUR_SHIFT 0 +#define DA9150_RESET_DUR_MASK (0x03 << 0) +#define DA9150_RESET_EXT_SHIFT 2 +#define DA9150_RESET_EXT_MASK (0x03 << 2) +#define DA9150_START_MAX_SHIFT 4 +#define DA9150_START_MAX_MASK (0x03 << 4) +#define DA9150_PS_WAIT_EN_SHIFT 6 +#define DA9150_PS_WAIT_EN_MASK BIT(6) +#define DA9150_PS_DISABLE_DIRECT_SHIFT 7 +#define DA9150_PS_DISABLE_DIRECT_MASK BIT(7) + +/* DA9150_CONFIG_B = 0x0E1 */ +#define DA9150_VFAULT_ADJ_SHIFT 0 +#define DA9150_VFAULT_ADJ_MASK (0x0f << 0) +#define DA9150_VFAULT_HYST_SHIFT 4 +#define DA9150_VFAULT_HYST_MASK (0x07 << 4) +#define DA9150_VFAULT_EN_SHIFT 7 +#define DA9150_VFAULT_EN_MASK BIT(7) + +/* DA9150_CONFIG_C = 0x0E2 */ +#define DA9150_VSYS_MIN_SHIFT 3 +#define DA9150_VSYS_MIN_MASK (0x1f << 3) + +/* DA9150_CONFIG_D = 0x0E3 */ +#define DA9150_LFOSC_EXT_SHIFT 0 +#define DA9150_LFOSC_EXT_MASK BIT(0) +#define DA9150_VDD33_DWN_SHIFT 1 +#define DA9150_VDD33_DWN_MASK BIT(1) +#define DA9150_WKUP_PM_EN_SHIFT 2 +#define DA9150_WKUP_PM_EN_MASK BIT(2) +#define DA9150_WKUP_CE_SEL_SHIFT 3 +#define DA9150_WKUP_CE_SEL_MASK (0x03 << 3) +#define DA9150_WKUP_CLK32K_EN_SHIFT 5 +#define DA9150_WKUP_CLK32K_EN_MASK BIT(5) +#define DA9150_DISABLE_DEL_SHIFT 7 +#define DA9150_DISABLE_DEL_MASK BIT(7) + +/* DA9150_CONFIG_E = 0x0E4 */ +#define DA9150_PM_SPKSUP_DIS_SHIFT 0 +#define DA9150_PM_SPKSUP_DIS_MASK BIT(0) +#define DA9150_PM_MERGE_SHIFT 1 +#define DA9150_PM_MERGE_MASK BIT(1) +#define DA9150_PM_SR_OFF_SHIFT 2 +#define DA9150_PM_SR_OFF_MASK BIT(2) +#define DA9150_PM_TIMEOUT_EN_SHIFT 3 +#define DA9150_PM_TIMEOUT_EN_MASK BIT(3) +#define DA9150_PM_DLY_SEL_SHIFT 4 +#define DA9150_PM_DLY_SEL_MASK (0x07 << 4) +#define DA9150_PM_OUT_DLY_SEL_SHIFT 7 +#define DA9150_PM_OUT_DLY_SEL_MASK BIT(7) + +/* DA9150_CONTROL_A = 0x0E5 */ +#define DA9150_VDD33_SL_SHIFT 0 +#define DA9150_VDD33_SL_MASK BIT(0) +#define DA9150_VDD33_LPM_SHIFT 1 +#define DA9150_VDD33_LPM_MASK (0x03 << 1) +#define DA9150_VDD33_EN_SHIFT 3 +#define DA9150_VDD33_EN_MASK BIT(3) +#define DA9150_GPI_LPM_SHIFT 6 +#define DA9150_GPI_LPM_MASK BIT(6) +#define DA9150_PM_IF_LPM_SHIFT 7 +#define DA9150_PM_IF_LPM_MASK BIT(7) + +/* DA9150_CONTROL_B = 0x0E6 */ +#define DA9150_LPM_SHIFT 0 +#define DA9150_LPM_MASK BIT(0) +#define DA9150_RESET_SHIFT 1 +#define DA9150_RESET_MASK BIT(1) +#define DA9150_RESET_USRCONF_EN_SHIFT 2 +#define DA9150_RESET_USRCONF_EN_MASK BIT(2) + +/* DA9150_CONTROL_C = 0x0E7 */ +#define DA9150_DISABLE_SHIFT 0 +#define DA9150_DISABLE_MASK BIT(0) + +/* DA9150_GPIO_A_B = 0x0E8 */ +#define DA9150_GPIOA_PIN_SHIFT 0 +#define DA9150_GPIOA_PIN_MASK (0x07 << 0) +#define DA9150_GPIOA_PIN_GPI (0x00 << 0) +#define DA9150_GPIOA_PIN_GPO_OD BIT(0) +#define DA9150_GPIOA_TYPE_SHIFT 3 +#define DA9150_GPIOA_TYPE_MASK BIT(3) +#define DA9150_GPIOB_PIN_SHIFT 4 +#define DA9150_GPIOB_PIN_MASK (0x07 << 4) +#define DA9150_GPIOB_PIN_GPI (0x00 << 4) +#define DA9150_GPIOB_PIN_GPO_OD BIT(4) +#define DA9150_GPIOB_TYPE_SHIFT 7 +#define DA9150_GPIOB_TYPE_MASK BIT(7) + +/* DA9150_GPIO_C_D = 0x0E9 */ +#define DA9150_GPIOC_PIN_SHIFT 0 +#define DA9150_GPIOC_PIN_MASK (0x07 << 0) +#define DA9150_GPIOC_PIN_GPI (0x00 << 0) +#define DA9150_GPIOC_PIN_GPO_OD BIT(0) +#define DA9150_GPIOC_TYPE_SHIFT 3 +#define DA9150_GPIOC_TYPE_MASK BIT(3) +#define DA9150_GPIOD_PIN_SHIFT 4 +#define DA9150_GPIOD_PIN_MASK (0x07 << 4) +#define DA9150_GPIOD_PIN_GPI (0x00 << 4) +#define DA9150_GPIOD_PIN_GPO_OD BIT(4) +#define DA9150_GPIOD_TYPE_SHIFT 7 +#define DA9150_GPIOD_TYPE_MASK BIT(7) + +/* DA9150_GPIO_MODE_CONT = 0x0EA */ +#define DA9150_GPIOA_MODE_SHIFT 0 +#define DA9150_GPIOA_MODE_MASK BIT(0) +#define DA9150_GPIOB_MODE_SHIFT 1 +#define DA9150_GPIOB_MODE_MASK BIT(1) +#define DA9150_GPIOC_MODE_SHIFT 2 +#define DA9150_GPIOC_MODE_MASK BIT(2) +#define DA9150_GPIOD_MODE_SHIFT 3 +#define DA9150_GPIOD_MODE_MASK BIT(3) +#define DA9150_GPIOA_CONT_SHIFT 4 +#define DA9150_GPIOA_CONT_MASK BIT(4) +#define DA9150_GPIOB_CONT_SHIFT 5 +#define DA9150_GPIOB_CONT_MASK BIT(5) +#define DA9150_GPIOC_CONT_SHIFT 6 +#define DA9150_GPIOC_CONT_MASK BIT(6) +#define DA9150_GPIOD_CONT_SHIFT 7 +#define DA9150_GPIOD_CONT_MASK BIT(7) + +/* DA9150_GPIO_CTRL_B = 0x0EB */ +#define DA9150_WAKE_PIN_SHIFT 0 +#define DA9150_WAKE_PIN_MASK (0x03 << 0) +#define DA9150_WAKE_MODE_SHIFT 2 +#define DA9150_WAKE_MODE_MASK BIT(2) +#define DA9150_WAKE_CONT_SHIFT 3 +#define DA9150_WAKE_CONT_MASK BIT(3) +#define DA9150_WAKE_DLY_SHIFT 4 +#define DA9150_WAKE_DLY_MASK BIT(4) + +/* DA9150_GPIO_CTRL_A = 0x0EC */ +#define DA9150_GPIOA_ANAEN_SHIFT 0 +#define DA9150_GPIOA_ANAEN_MASK BIT(0) +#define DA9150_GPIOB_ANAEN_SHIFT 1 +#define DA9150_GPIOB_ANAEN_MASK BIT(1) +#define DA9150_GPIOC_ANAEN_SHIFT 2 +#define DA9150_GPIOC_ANAEN_MASK BIT(2) +#define DA9150_GPIOD_ANAEN_SHIFT 3 +#define DA9150_GPIOD_ANAEN_MASK BIT(3) +#define DA9150_GPIO_ANAEN 0x01 +#define DA9150_GPIO_ANAEN_MASK 0x0F +#define DA9150_CHGLED_PIN_SHIFT 5 +#define DA9150_CHGLED_PIN_MASK (0x07 << 5) + +/* DA9150_GPIO_CTRL_C = 0x0ED */ +#define DA9150_CHGBL_DUR_SHIFT 0 +#define DA9150_CHGBL_DUR_MASK (0x03 << 0) +#define DA9150_CHGBL_DBL_SHIFT 2 +#define DA9150_CHGBL_DBL_MASK BIT(2) +#define DA9150_CHGBL_FRQ_SHIFT 3 +#define DA9150_CHGBL_FRQ_MASK (0x03 << 3) +#define DA9150_CHGBL_FLKR_SHIFT 5 +#define DA9150_CHGBL_FLKR_MASK BIT(5) + +/* DA9150_GPIO_CFG_A = 0x0EE */ +#define DA9150_CE_LPM_DEB_SHIFT 0 +#define DA9150_CE_LPM_DEB_MASK (0x07 << 0) + +/* DA9150_GPIO_CFG_B = 0x0EF */ +#define DA9150_GPIOA_PUPD_SHIFT 0 +#define DA9150_GPIOA_PUPD_MASK BIT(0) +#define DA9150_GPIOB_PUPD_SHIFT 1 +#define DA9150_GPIOB_PUPD_MASK BIT(1) +#define DA9150_GPIOC_PUPD_SHIFT 2 +#define DA9150_GPIOC_PUPD_MASK BIT(2) +#define DA9150_GPIOD_PUPD_SHIFT 3 +#define DA9150_GPIOD_PUPD_MASK BIT(3) +#define DA9150_GPIO_PUPD_MASK (0xF << 0) +#define DA9150_GPI_DEB_SHIFT 4 +#define DA9150_GPI_DEB_MASK (0x07 << 4) +#define DA9150_LPM_EN_SHIFT 7 +#define DA9150_LPM_EN_MASK BIT(7) + +/* DA9150_GPIO_CFG_C = 0x0F0 */ +#define DA9150_GPI_V_SHIFT 0 +#define DA9150_GPI_V_MASK BIT(0) +#define DA9150_VDDIO_INT_SHIFT 1 +#define DA9150_VDDIO_INT_MASK BIT(1) +#define DA9150_FAULT_PIN_SHIFT 3 +#define DA9150_FAULT_PIN_MASK (0x07 << 3) +#define DA9150_FAULT_TYPE_SHIFT 6 +#define DA9150_FAULT_TYPE_MASK BIT(6) +#define DA9150_NIRQ_PUPD_SHIFT 7 +#define DA9150_NIRQ_PUPD_MASK BIT(7) + +/* DA9150_GPADC_MAN = 0x0F2 */ +#define DA9150_GPADC_EN_SHIFT 0 +#define DA9150_GPADC_EN_MASK BIT(0) +#define DA9150_GPADC_MUX_SHIFT 1 +#define DA9150_GPADC_MUX_MASK (0x1f << 1) + +/* DA9150_GPADC_RES_A = 0x0F4 */ +#define DA9150_GPADC_RES_H_SHIFT 0 +#define DA9150_GPADC_RES_H_MASK (0xff << 0) + +/* DA9150_GPADC_RES_B = 0x0F5 */ +#define DA9150_GPADC_RUN_SHIFT 0 +#define DA9150_GPADC_RUN_MASK BIT(0) +#define DA9150_GPADC_RES_L_SHIFT 6 +#define DA9150_GPADC_RES_L_MASK (0x03 << 6) +#define DA9150_GPADC_RES_L_BITS 2 + +/* DA9150_PAGE_CON_2 = 0x100 */ +#define DA9150_PAGE_SHIFT 0 +#define DA9150_PAGE_MASK (0x3f << 0) +#define DA9150_WRITE_MODE_SHIFT 6 +#define DA9150_WRITE_MODE_MASK BIT(6) +#define DA9150_REVERT_SHIFT 7 +#define DA9150_REVERT_MASK BIT(7) + +/* DA9150_OTP_CONT_SHARED = 0x101 */ +#define DA9150_PC_DONE_SHIFT 3 +#define DA9150_PC_DONE_MASK BIT(3) + +/* DA9150_INTERFACE_SHARED = 0x105 */ +#define DA9150_IF_BASE_ADDR_SHIFT 4 +#define DA9150_IF_BASE_ADDR_MASK (0x0f << 4) + +/* DA9150_CONFIG_A_SHARED = 0x106 */ +#define DA9150_NIRQ_VDD_SHIFT 1 +#define DA9150_NIRQ_VDD_MASK BIT(1) +#define DA9150_NIRQ_PIN_SHIFT 2 +#define DA9150_NIRQ_PIN_MASK BIT(2) +#define DA9150_NIRQ_TYPE_SHIFT 3 +#define DA9150_NIRQ_TYPE_MASK BIT(3) +#define DA9150_PM_IF_V_SHIFT 4 +#define DA9150_PM_IF_V_MASK BIT(4) +#define DA9150_PM_IF_FMP_SHIFT 5 +#define DA9150_PM_IF_FMP_MASK BIT(5) +#define DA9150_PM_IF_HSM_SHIFT 6 +#define DA9150_PM_IF_HSM_MASK BIT(6) + +/* DA9150_CONFIG_D_SHARED = 0x109 */ +#define DA9150_NIRQ_MODE_SHIFT 1 +#define DA9150_NIRQ_MODE_MASK BIT(1) + +/* DA9150_ADETVB_CFG_C = 0x150 */ +#define DA9150_TADP_RISE_SHIFT 0 +#define DA9150_TADP_RISE_MASK (0xff << 0) + +/* DA9150_ADETD_STAT = 0x151 */ +#define DA9150_DCD_STAT_SHIFT 0 +#define DA9150_DCD_STAT_MASK BIT(0) +#define DA9150_PCD_STAT_SHIFT 1 +#define DA9150_PCD_STAT_MASK (0x03 << 1) +#define DA9150_SCD_STAT_SHIFT 3 +#define DA9150_SCD_STAT_MASK (0x03 << 3) +#define DA9150_DP_STAT_SHIFT 5 +#define DA9150_DP_STAT_MASK BIT(5) +#define DA9150_DM_STAT_SHIFT 6 +#define DA9150_DM_STAT_MASK BIT(6) + +/* DA9150_ADET_CMPSTAT = 0x152 */ +#define DA9150_DP_COMP_SHIFT 1 +#define DA9150_DP_COMP_MASK BIT(1) +#define DA9150_DM_COMP_SHIFT 2 +#define DA9150_DM_COMP_MASK BIT(2) +#define DA9150_ADP_SNS_COMP_SHIFT 3 +#define DA9150_ADP_SNS_COMP_MASK BIT(3) +#define DA9150_ADP_PRB_COMP_SHIFT 4 +#define DA9150_ADP_PRB_COMP_MASK BIT(4) +#define DA9150_ID_COMP_SHIFT 5 +#define DA9150_ID_COMP_MASK BIT(5) + +/* DA9150_ADET_CTRL_A = 0x153 */ +#define DA9150_AID_DAT_SHIFT 0 +#define DA9150_AID_DAT_MASK BIT(0) +#define DA9150_AID_ID_SHIFT 1 +#define DA9150_AID_ID_MASK BIT(1) +#define DA9150_AID_TRIG_SHIFT 2 +#define DA9150_AID_TRIG_MASK BIT(2) + +/* DA9150_ADETVB_CFG_B = 0x154 */ +#define DA9150_VB_MODE_SHIFT 0 +#define DA9150_VB_MODE_MASK (0x03 << 0) +#define DA9150_VB_MODE_VB_SESS BIT(0) + +#define DA9150_TADP_PRB_SHIFT 2 +#define DA9150_TADP_PRB_MASK BIT(2) +#define DA9150_DAT_RPD_EXT_SHIFT 5 +#define DA9150_DAT_RPD_EXT_MASK BIT(5) +#define DA9150_CONF_RPD_SHIFT 6 +#define DA9150_CONF_RPD_MASK BIT(6) +#define DA9150_CONF_SRP_SHIFT 7 +#define DA9150_CONF_SRP_MASK BIT(7) + +/* DA9150_ADETVB_CFG_A = 0x155 */ +#define DA9150_AID_MODE_SHIFT 0 +#define DA9150_AID_MODE_MASK (0x03 << 0) +#define DA9150_AID_EXT_POL_SHIFT 2 +#define DA9150_AID_EXT_POL_MASK BIT(2) + +/* DA9150_ADETAC_CFG_A = 0x156 */ +#define DA9150_ISET_CDP_SHIFT 0 +#define DA9150_ISET_CDP_MASK (0x1f << 0) +#define DA9150_CONF_DBP_SHIFT 5 +#define DA9150_CONF_DBP_MASK BIT(5) + +/* DA9150_ADDETAC_CFG_B = 0x157 */ +#define DA9150_ISET_DCHG_SHIFT 0 +#define DA9150_ISET_DCHG_MASK (0x1f << 0) +#define DA9150_CONF_GPIOA_SHIFT 5 +#define DA9150_CONF_GPIOA_MASK BIT(5) +#define DA9150_CONF_GPIOB_SHIFT 6 +#define DA9150_CONF_GPIOB_MASK BIT(6) +#define DA9150_AID_VB_SHIFT 7 +#define DA9150_AID_VB_MASK BIT(7) + +/* DA9150_ADETAC_CFG_C = 0x158 */ +#define DA9150_ISET_DEF_SHIFT 0 +#define DA9150_ISET_DEF_MASK (0x1f << 0) +#define DA9150_CONF_MODE_SHIFT 5 +#define DA9150_CONF_MODE_MASK (0x03 << 5) +#define DA9150_AID_CR_DIS_SHIFT 7 +#define DA9150_AID_CR_DIS_MASK BIT(7) + +/* DA9150_ADETAC_CFG_D = 0x159 */ +#define DA9150_ISET_UNIT_SHIFT 0 +#define DA9150_ISET_UNIT_MASK (0x1f << 0) +#define DA9150_AID_UNCLAMP_SHIFT 5 +#define DA9150_AID_UNCLAMP_MASK BIT(5) + +/* DA9150_ADETVB_CFG_D = 0x15A */ +#define DA9150_ID_MODE_SHIFT 0 +#define DA9150_ID_MODE_MASK (0x03 << 0) +#define DA9150_DAT_MODE_SHIFT 2 +#define DA9150_DAT_MODE_MASK (0x0f << 2) +#define DA9150_DAT_SWP_SHIFT 6 +#define DA9150_DAT_SWP_MASK BIT(6) +#define DA9150_DAT_CLAMP_EXT_SHIFT 7 +#define DA9150_DAT_CLAMP_EXT_MASK BIT(7) + +/* DA9150_ADETID_CFG_A = 0x15B */ +#define DA9150_TID_POLL_SHIFT 0 +#define DA9150_TID_POLL_MASK (0x07 << 0) +#define DA9150_RID_CONV_SHIFT 3 +#define DA9150_RID_CONV_MASK BIT(3) + +/* DA9150_ADET_RID_PT_CHG_H = 0x15C */ +#define DA9150_RID_PT_CHG_H_SHIFT 0 +#define DA9150_RID_PT_CHG_H_MASK (0xff << 0) + +/* DA9150_ADET_RID_PT_CHG_L = 0x15D */ +#define DA9150_RID_PT_CHG_L_SHIFT 6 +#define DA9150_RID_PT_CHG_L_MASK (0x03 << 6) + +/* DA9150_PPR_TCTR_B = 0x160 */ +#define DA9150_CHG_TCTR_VAL_SHIFT 0 +#define DA9150_CHG_TCTR_VAL_MASK (0xff << 0) + +/* DA9150_PPR_BKCTRL_A = 0x163 */ +#define DA9150_VBUS_MODE_SHIFT 0 +#define DA9150_VBUS_MODE_MASK (0x03 << 0) +#define DA9150_VBUS_MODE_CHG BIT(0) +#define DA9150_VBUS_MODE_OTG (0x02 << 0) +#define DA9150_VBUS_LPM_SHIFT 2 +#define DA9150_VBUS_LPM_MASK (0x03 << 2) +#define DA9150_VBUS_SUSP_SHIFT 4 +#define DA9150_VBUS_SUSP_MASK BIT(4) +#define DA9150_VBUS_PWM_SHIFT 5 +#define DA9150_VBUS_PWM_MASK BIT(5) +#define DA9150_VBUS_ISO_SHIFT 6 +#define DA9150_VBUS_ISO_MASK BIT(6) +#define DA9150_VBUS_LDO_SHIFT 7 +#define DA9150_VBUS_LDO_MASK BIT(7) + +/* DA9150_PPR_BKCFG_A = 0x164 */ +#define DA9150_VBUS_ISET_SHIFT 0 +#define DA9150_VBUS_ISET_MASK (0x1f << 0) +#define DA9150_VBUS_IMAX_SHIFT 5 +#define DA9150_VBUS_IMAX_MASK BIT(5) +#define DA9150_VBUS_IOTG_SHIFT 6 +#define DA9150_VBUS_IOTG_MASK (0x03 << 6) + +/* DA9150_PPR_BKCFG_B = 0x165 */ +#define DA9150_VBUS_DROP_SHIFT 0 +#define DA9150_VBUS_DROP_MASK (0x0f << 0) +#define DA9150_VBUS_FAULT_DIS_SHIFT 6 +#define DA9150_VBUS_FAULT_DIS_MASK BIT(6) +#define DA9150_OTG_FAULT_DIS_SHIFT 7 +#define DA9150_OTG_FAULT_DIS_MASK BIT(7) + +/* DA9150_PPR_CHGCTRL_A = 0x166 */ +#define DA9150_CHG_EN_SHIFT 0 +#define DA9150_CHG_EN_MASK BIT(0) + +/* DA9150_PPR_CHGCTRL_B = 0x167 */ +#define DA9150_CHG_VBAT_SHIFT 0 +#define DA9150_CHG_VBAT_MASK (0x1f << 0) +#define DA9150_CHG_VDROP_SHIFT 6 +#define DA9150_CHG_VDROP_MASK (0x03 << 6) + +/* DA9150_PPR_CHGCTRL_C = 0x168 */ +#define DA9150_CHG_VFAULT_SHIFT 0 +#define DA9150_CHG_VFAULT_MASK (0x0f << 0) +#define DA9150_CHG_IPRE_SHIFT 4 +#define DA9150_CHG_IPRE_MASK (0x03 << 4) + +/* DA9150_PPR_TCTR_A = 0x169 */ +#define DA9150_CHG_TCTR_SHIFT 0 +#define DA9150_CHG_TCTR_MASK (0x07 << 0) +#define DA9150_CHG_TCTR_MODE_SHIFT 4 +#define DA9150_CHG_TCTR_MODE_MASK BIT(4) + +/* DA9150_PPR_CHGCTRL_D = 0x16A */ +#define DA9150_CHG_IBAT_SHIFT 0 +#define DA9150_CHG_IBAT_MASK (0xff << 0) + +/* DA9150_PPR_CHGCTRL_E = 0x16B */ +#define DA9150_CHG_IEND_SHIFT 0 +#define DA9150_CHG_IEND_MASK (0xff << 0) + +/* DA9150_PPR_CHGCTRL_F = 0x16C */ +#define DA9150_CHG_VCOLD_SHIFT 0 +#define DA9150_CHG_VCOLD_MASK (0x1f << 0) +#define DA9150_TBAT_TQA_EN_SHIFT 6 +#define DA9150_TBAT_TQA_EN_MASK BIT(6) +#define DA9150_TBAT_TDP_EN_SHIFT 7 +#define DA9150_TBAT_TDP_EN_MASK BIT(7) + +/* DA9150_PPR_CHGCTRL_G = 0x16D */ +#define DA9150_CHG_VWARM_SHIFT 0 +#define DA9150_CHG_VWARM_MASK (0x1f << 0) + +/* DA9150_PPR_CHGCTRL_H = 0x16E */ +#define DA9150_CHG_VHOT_SHIFT 0 +#define DA9150_CHG_VHOT_MASK (0x1f << 0) + +/* DA9150_PPR_CHGCTRL_I = 0x16F */ +#define DA9150_CHG_ICOLD_SHIFT 0 +#define DA9150_CHG_ICOLD_MASK (0xff << 0) + +/* DA9150_PPR_CHGCTRL_J = 0x170 */ +#define DA9150_CHG_IWARM_SHIFT 0 +#define DA9150_CHG_IWARM_MASK (0xff << 0) + +/* DA9150_PPR_CHGCTRL_K = 0x171 */ +#define DA9150_CHG_IHOT_SHIFT 0 +#define DA9150_CHG_IHOT_MASK (0xff << 0) + +/* DA9150_PPR_CHGCTRL_L = 0x172 */ +#define DA9150_CHG_IBAT_TRED_SHIFT 0 +#define DA9150_CHG_IBAT_TRED_MASK (0xff << 0) + +/* DA9150_PPR_CHGCTRL_M = 0x173 */ +#define DA9150_CHG_VFLOAT_SHIFT 0 +#define DA9150_CHG_VFLOAT_MASK (0x0f << 0) +#define DA9150_CHG_LPM_SHIFT 5 +#define DA9150_CHG_LPM_MASK BIT(5) +#define DA9150_CHG_NBLO_SHIFT 6 +#define DA9150_CHG_NBLO_MASK BIT(6) +#define DA9150_EBS_EN_SHIFT 7 +#define DA9150_EBS_EN_MASK BIT(7) + +/* DA9150_PPR_THYST_A = 0x174 */ +#define DA9150_TBAT_T1_SHIFT 0 +#define DA9150_TBAT_T1_MASK (0xff << 0) + +/* DA9150_PPR_THYST_B = 0x175 */ +#define DA9150_TBAT_T2_SHIFT 0 +#define DA9150_TBAT_T2_MASK (0xff << 0) + +/* DA9150_PPR_THYST_C = 0x176 */ +#define DA9150_TBAT_T3_SHIFT 0 +#define DA9150_TBAT_T3_MASK (0xff << 0) + +/* DA9150_PPR_THYST_D = 0x177 */ +#define DA9150_TBAT_T4_SHIFT 0 +#define DA9150_TBAT_T4_MASK (0xff << 0) + +/* DA9150_PPR_THYST_E = 0x178 */ +#define DA9150_TBAT_T5_SHIFT 0 +#define DA9150_TBAT_T5_MASK (0xff << 0) + +/* DA9150_PPR_THYST_F = 0x179 */ +#define DA9150_TBAT_H1_SHIFT 0 +#define DA9150_TBAT_H1_MASK (0xff << 0) + +/* DA9150_PPR_THYST_G = 0x17A */ +#define DA9150_TBAT_H5_SHIFT 0 +#define DA9150_TBAT_H5_MASK (0xff << 0) + +/* DA9150_PAGE_CON_3 = 0x180 */ +#define DA9150_PAGE_SHIFT 0 +#define DA9150_PAGE_MASK (0x3f << 0) +#define DA9150_WRITE_MODE_SHIFT 6 +#define DA9150_WRITE_MODE_MASK BIT(6) +#define DA9150_REVERT_SHIFT 7 +#define DA9150_REVERT_MASK BIT(7) + +/* DA9150_PAGE_CON_4 = 0x200 */ +#define DA9150_PAGE_SHIFT 0 +#define DA9150_PAGE_MASK (0x3f << 0) +#define DA9150_WRITE_MODE_SHIFT 6 +#define DA9150_WRITE_MODE_MASK BIT(6) +#define DA9150_REVERT_SHIFT 7 +#define DA9150_REVERT_MASK BIT(7) + +/* DA9150_PAGE_CON_5 = 0x280 */ +#define DA9150_PAGE_SHIFT 0 +#define DA9150_PAGE_MASK (0x3f << 0) +#define DA9150_WRITE_MODE_SHIFT 6 +#define DA9150_WRITE_MODE_MASK BIT(6) +#define DA9150_REVERT_SHIFT 7 +#define DA9150_REVERT_MASK BIT(7) + +/* DA9150_PAGE_CON_6 = 0x300 */ +#define DA9150_PAGE_SHIFT 0 +#define DA9150_PAGE_MASK (0x3f << 0) +#define DA9150_WRITE_MODE_SHIFT 6 +#define DA9150_WRITE_MODE_MASK BIT(6) +#define DA9150_REVERT_SHIFT 7 +#define DA9150_REVERT_MASK BIT(7) + +/* DA9150_COREBTLD_STAT_A = 0x302 */ +#define DA9150_BOOTLD_STAT_SHIFT 0 +#define DA9150_BOOTLD_STAT_MASK (0x03 << 0) +#define DA9150_CORE_LOCKUP_SHIFT 2 +#define DA9150_CORE_LOCKUP_MASK BIT(2) + +/* DA9150_COREBTLD_CTRL_A = 0x303 */ +#define DA9150_CORE_RESET_SHIFT 0 +#define DA9150_CORE_RESET_MASK BIT(0) +#define DA9150_CORE_STOP_SHIFT 1 +#define DA9150_CORE_STOP_MASK BIT(1) + +/* DA9150_CORE_CONFIG_A = 0x304 */ +#define DA9150_CORE_MEMMUX_SHIFT 0 +#define DA9150_CORE_MEMMUX_MASK (0x03 << 0) +#define DA9150_WDT_AUTO_START_SHIFT 2 +#define DA9150_WDT_AUTO_START_MASK BIT(2) +#define DA9150_WDT_AUTO_LOCK_SHIFT 3 +#define DA9150_WDT_AUTO_LOCK_MASK BIT(3) +#define DA9150_WDT_HLT_NO_CLK_SHIFT 4 +#define DA9150_WDT_HLT_NO_CLK_MASK BIT(4) + +/* DA9150_CORE_CONFIG_C = 0x305 */ +#define DA9150_CORE_SW_SIZE_SHIFT 0 +#define DA9150_CORE_SW_SIZE_MASK (0xff << 0) + +/* DA9150_CORE_CONFIG_B = 0x306 */ +#define DA9150_BOOTLD_EN_SHIFT 0 +#define DA9150_BOOTLD_EN_MASK BIT(0) +#define DA9150_CORE_EN_SHIFT 2 +#define DA9150_CORE_EN_MASK BIT(2) +#define DA9150_CORE_SW_SRC_SHIFT 3 +#define DA9150_CORE_SW_SRC_MASK (0x07 << 3) +#define DA9150_DEEP_SLEEP_EN_SHIFT 7 +#define DA9150_DEEP_SLEEP_EN_MASK BIT(7) + +/* DA9150_CORE_CFG_DATA_A = 0x307 */ +#define DA9150_CORE_CFG_DT_A_SHIFT 0 +#define DA9150_CORE_CFG_DT_A_MASK (0xff << 0) + +/* DA9150_CORE_CFG_DATA_B = 0x308 */ +#define DA9150_CORE_CFG_DT_B_SHIFT 0 +#define DA9150_CORE_CFG_DT_B_MASK (0xff << 0) + +/* DA9150_CORE_CMD_A = 0x309 */ +#define DA9150_CORE_CMD_SHIFT 0 +#define DA9150_CORE_CMD_MASK (0xff << 0) + +/* DA9150_CORE_DATA_A = 0x30A */ +#define DA9150_CORE_DATA_0_SHIFT 0 +#define DA9150_CORE_DATA_0_MASK (0xff << 0) + +/* DA9150_CORE_DATA_B = 0x30B */ +#define DA9150_CORE_DATA_1_SHIFT 0 +#define DA9150_CORE_DATA_1_MASK (0xff << 0) + +/* DA9150_CORE_DATA_C = 0x30C */ +#define DA9150_CORE_DATA_2_SHIFT 0 +#define DA9150_CORE_DATA_2_MASK (0xff << 0) + +/* DA9150_CORE_DATA_D = 0x30D */ +#define DA9150_CORE_DATA_3_SHIFT 0 +#define DA9150_CORE_DATA_3_MASK (0xff << 0) + +/* DA9150_CORE2WIRE_STAT_A = 0x310 */ +#define DA9150_FW_FWDL_ERR_SHIFT 7 +#define DA9150_FW_FWDL_ERR_MASK BIT(7) + +/* DA9150_CORE2WIRE_CTRL_A = 0x311 */ +#define DA9150_FW_FWDL_EN_SHIFT 0 +#define DA9150_FW_FWDL_EN_MASK BIT(0) +#define DA9150_FG_QIF_EN_SHIFT 1 +#define DA9150_FG_QIF_EN_MASK BIT(1) +#define DA9150_CORE_BASE_ADDR_SHIFT 4 +#define DA9150_CORE_BASE_ADDR_MASK (0x0f << 4) + +/* DA9150_FW_CTRL_A = 0x312 */ +#define DA9150_FW_SEAL_SHIFT 0 +#define DA9150_FW_SEAL_MASK (0xff << 0) + +/* DA9150_FW_CTRL_C = 0x313 */ +#define DA9150_FW_FWDL_CRC_SHIFT 0 +#define DA9150_FW_FWDL_CRC_MASK (0xff << 0) + +/* DA9150_FW_CTRL_D = 0x314 */ +#define DA9150_FW_FWDL_BASE_SHIFT 0 +#define DA9150_FW_FWDL_BASE_MASK (0x0f << 0) + +/* DA9150_FG_CTRL_A = 0x315 */ +#define DA9150_FG_QIF_CODE_SHIFT 0 +#define DA9150_FG_QIF_CODE_MASK (0xff << 0) + +/* DA9150_FG_CTRL_B = 0x316 */ +#define DA9150_FG_QIF_VALUE_SHIFT 0 +#define DA9150_FG_QIF_VALUE_MASK (0xff << 0) + +/* DA9150_FW_CTRL_E = 0x317 */ +#define DA9150_FW_FWDL_SEG_SHIFT 0 +#define DA9150_FW_FWDL_SEG_MASK (0xff << 0) + +/* DA9150_FW_CTRL_B = 0x318 */ +#define DA9150_FW_FWDL_VALUE_SHIFT 0 +#define DA9150_FW_FWDL_VALUE_MASK (0xff << 0) + +/* DA9150_GPADC_CMAN = 0x320 */ +#define DA9150_GPADC_CEN_SHIFT 0 +#define DA9150_GPADC_CEN_MASK BIT(0) +#define DA9150_GPADC_CMUX_SHIFT 1 +#define DA9150_GPADC_CMUX_MASK (0x1f << 1) + +/* DA9150_GPADC_CRES_A = 0x322 */ +#define DA9150_GPADC_CRES_H_SHIFT 0 +#define DA9150_GPADC_CRES_H_MASK (0xff << 0) + +/* DA9150_GPADC_CRES_B = 0x323 */ +#define DA9150_GPADC_CRUN_SHIFT 0 +#define DA9150_GPADC_CRUN_MASK BIT(0) +#define DA9150_GPADC_CRES_L_SHIFT 6 +#define DA9150_GPADC_CRES_L_MASK (0x03 << 6) + +/* DA9150_CC_CFG_A = 0x328 */ +#define DA9150_CC_EN_SHIFT 0 +#define DA9150_CC_EN_MASK BIT(0) +#define DA9150_CC_TIMEBASE_SHIFT 1 +#define DA9150_CC_TIMEBASE_MASK (0x03 << 1) +#define DA9150_CC_CFG_SHIFT 5 +#define DA9150_CC_CFG_MASK (0x03 << 5) +#define DA9150_CC_ENDLESS_MODE_SHIFT 7 +#define DA9150_CC_ENDLESS_MODE_MASK BIT(7) + +/* DA9150_CC_CFG_B = 0x329 */ +#define DA9150_CC_OPT_SHIFT 0 +#define DA9150_CC_OPT_MASK (0x03 << 0) +#define DA9150_CC_PREAMP_SHIFT 2 +#define DA9150_CC_PREAMP_MASK (0x03 << 2) + +/* DA9150_CC_ICHG_RES_A = 0x32A */ +#define DA9150_CC_ICHG_RES_H_SHIFT 0 +#define DA9150_CC_ICHG_RES_H_MASK (0xff << 0) + +/* DA9150_CC_ICHG_RES_B = 0x32B */ +#define DA9150_CC_ICHG_RES_L_SHIFT 3 +#define DA9150_CC_ICHG_RES_L_MASK (0x1f << 3) + +/* DA9150_CC_IAVG_RES_A = 0x32C */ +#define DA9150_CC_IAVG_RES_H_SHIFT 0 +#define DA9150_CC_IAVG_RES_H_MASK (0xff << 0) + +/* DA9150_CC_IAVG_RES_B = 0x32D */ +#define DA9150_CC_IAVG_RES_L_SHIFT 0 +#define DA9150_CC_IAVG_RES_L_MASK (0xff << 0) + +/* DA9150_TAUX_CTRL_A = 0x330 */ +#define DA9150_TAUX_EN_SHIFT 0 +#define DA9150_TAUX_EN_MASK BIT(0) +#define DA9150_TAUX_MOD_SHIFT 1 +#define DA9150_TAUX_MOD_MASK BIT(1) +#define DA9150_TAUX_UPDATE_SHIFT 2 +#define DA9150_TAUX_UPDATE_MASK BIT(2) + +/* DA9150_TAUX_RELOAD_H = 0x332 */ +#define DA9150_TAUX_RLD_H_SHIFT 0 +#define DA9150_TAUX_RLD_H_MASK (0xff << 0) + +/* DA9150_TAUX_RELOAD_L = 0x333 */ +#define DA9150_TAUX_RLD_L_SHIFT 3 +#define DA9150_TAUX_RLD_L_MASK (0x1f << 3) + +/* DA9150_TAUX_VALUE_H = 0x334 */ +#define DA9150_TAUX_VAL_H_SHIFT 0 +#define DA9150_TAUX_VAL_H_MASK (0xff << 0) + +/* DA9150_TAUX_VALUE_L = 0x335 */ +#define DA9150_TAUX_VAL_L_SHIFT 3 +#define DA9150_TAUX_VAL_L_MASK (0x1f << 3) + +/* DA9150_AUX_DATA_0 = 0x338 */ +#define DA9150_AUX_DAT_0_SHIFT 0 +#define DA9150_AUX_DAT_0_MASK (0xff << 0) + +/* DA9150_AUX_DATA_1 = 0x339 */ +#define DA9150_AUX_DAT_1_SHIFT 0 +#define DA9150_AUX_DAT_1_MASK (0xff << 0) + +/* DA9150_AUX_DATA_2 = 0x33A */ +#define DA9150_AUX_DAT_2_SHIFT 0 +#define DA9150_AUX_DAT_2_MASK (0xff << 0) + +/* DA9150_AUX_DATA_3 = 0x33B */ +#define DA9150_AUX_DAT_3_SHIFT 0 +#define DA9150_AUX_DAT_3_MASK (0xff << 0) + +/* DA9150_BIF_CTRL = 0x340 */ +#define DA9150_BIF_ISRC_EN_SHIFT 0 +#define DA9150_BIF_ISRC_EN_MASK BIT(0) + +/* DA9150_TBAT_CTRL_A = 0x342 */ +#define DA9150_TBAT_EN_SHIFT 0 +#define DA9150_TBAT_EN_MASK BIT(0) +#define DA9150_TBAT_SW1_SHIFT 1 +#define DA9150_TBAT_SW1_MASK BIT(1) +#define DA9150_TBAT_SW2_SHIFT 2 +#define DA9150_TBAT_SW2_MASK BIT(2) + +/* DA9150_TBAT_CTRL_B = 0x343 */ +#define DA9150_TBAT_SW_FRC_SHIFT 0 +#define DA9150_TBAT_SW_FRC_MASK BIT(0) +#define DA9150_TBAT_STAT_SW1_SHIFT 1 +#define DA9150_TBAT_STAT_SW1_MASK BIT(1) +#define DA9150_TBAT_STAT_SW2_SHIFT 2 +#define DA9150_TBAT_STAT_SW2_MASK BIT(2) +#define DA9150_TBAT_HIGH_CURR_SHIFT 3 +#define DA9150_TBAT_HIGH_CURR_MASK BIT(3) + +/* DA9150_TBAT_RES_A = 0x344 */ +#define DA9150_TBAT_RES_H_SHIFT 0 +#define DA9150_TBAT_RES_H_MASK (0xff << 0) + +/* DA9150_TBAT_RES_B = 0x345 */ +#define DA9150_TBAT_RES_DIS_SHIFT 0 +#define DA9150_TBAT_RES_DIS_MASK BIT(0) +#define DA9150_TBAT_RES_L_SHIFT 6 +#define DA9150_TBAT_RES_L_MASK (0x03 << 6) + +#endif /* __DA9150_REGISTERS_H */ diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index 960b92ad450d..f5043490d67c 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -447,7 +447,6 @@ struct max77686_dev { struct regmap_irq_chip_data *rtc_irq_data; int irq; - bool wakeup; struct mutex irqlock; int irq_masks_cur[MAX77686_IRQ_GROUP_NR]; int irq_masks_cache[MAX77686_IRQ_GROUP_NR]; diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index 553f7d09258a..bb995ab9a575 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -119,12 +119,6 @@ enum max77802_regulators { MAX77802_REG_MAX, }; -struct max77686_regulator_data { - int id; - struct regulator_init_data *initdata; - struct device_node *of_node; -}; - enum max77686_opmode { MAX77686_OPMODE_NORMAL, MAX77686_OPMODE_LP, @@ -136,26 +130,4 @@ struct max77686_opmode_data { int mode; }; -struct max77686_platform_data { - int ono; - int wakeup; - - /* ---- PMIC ---- */ - struct max77686_regulator_data *regulators; - int num_regulators; - - struct max77686_opmode_data *opmode_data; - - /* - * GPIO-DVS feature is not enabled with the current version of - * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default - * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW. - */ - int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */ - int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */ - unsigned int buck2_voltage[8]; /* buckx_voltage in uV */ - unsigned int buck3_voltage[8]; - unsigned int buck4_voltage[8]; -}; - #endif /* __LINUX_MFD_MAX77686_H */ diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h new file mode 100644 index 000000000000..742ebf1b76ca --- /dev/null +++ b/include/linux/mfd/qcom_rpm.h @@ -0,0 +1,13 @@ +#ifndef __QCOM_RPM_H__ +#define __QCOM_RPM_H__ + +#include <linux/types.h> + +struct qcom_rpm; + +#define QCOM_RPM_ACTIVE_STATE 0 +#define QCOM_RPM_SLEEP_STATE 1 + +int qcom_rpm_write(struct qcom_rpm *rpm, int state, int resource, u32 *buf, size_t count); + +#endif diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h new file mode 100644 index 000000000000..1b63fc2f42d1 --- /dev/null +++ b/include/linux/mfd/rt5033-private.h @@ -0,0 +1,260 @@ +/* + * MFD core driver for Richtek RT5033 + * + * Copyright (C) 2014 Samsung Electronics, Co., Ltd. + * Author: Beomho Seo <beomho.seo@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published bythe Free Software Foundation. + */ + +#ifndef __RT5033_PRIVATE_H__ +#define __RT5033_PRIVATE_H__ + +enum rt5033_reg { + RT5033_REG_CHG_STAT = 0x00, + RT5033_REG_CHG_CTRL1 = 0x01, + RT5033_REG_CHG_CTRL2 = 0x02, + RT5033_REG_DEVICE_ID = 0x03, + RT5033_REG_CHG_CTRL3 = 0x04, + RT5033_REG_CHG_CTRL4 = 0x05, + RT5033_REG_CHG_CTRL5 = 0x06, + RT5033_REG_RT_CTRL0 = 0x07, + RT5033_REG_CHG_RESET = 0x08, + /* Reserved 0x09~0x18 */ + RT5033_REG_RT_CTRL1 = 0x19, + /* Reserved 0x1A~0x20 */ + RT5033_REG_FLED_FUNCTION1 = 0x21, + RT5033_REG_FLED_FUNCTION2 = 0x22, + RT5033_REG_FLED_STROBE_CTRL1 = 0x23, + RT5033_REG_FLED_STROBE_CTRL2 = 0x24, + RT5033_REG_FLED_CTRL1 = 0x25, + RT5033_REG_FLED_CTRL2 = 0x26, + RT5033_REG_FLED_CTRL3 = 0x27, + RT5033_REG_FLED_CTRL4 = 0x28, + RT5033_REG_FLED_CTRL5 = 0x29, + /* Reserved 0x2A~0x40 */ + RT5033_REG_CTRL = 0x41, + RT5033_REG_BUCK_CTRL = 0x42, + RT5033_REG_LDO_CTRL = 0x43, + /* Reserved 0x44~0x46 */ + RT5033_REG_MANUAL_RESET_CTRL = 0x47, + /* Reserved 0x48~0x5F */ + RT5033_REG_CHG_IRQ1 = 0x60, + RT5033_REG_CHG_IRQ2 = 0x61, + RT5033_REG_CHG_IRQ3 = 0x62, + RT5033_REG_CHG_IRQ1_CTRL = 0x63, + RT5033_REG_CHG_IRQ2_CTRL = 0x64, + RT5033_REG_CHG_IRQ3_CTRL = 0x65, + RT5033_REG_LED_IRQ_STAT = 0x66, + RT5033_REG_LED_IRQ_CTRL = 0x67, + RT5033_REG_PMIC_IRQ_STAT = 0x68, + RT5033_REG_PMIC_IRQ_CTRL = 0x69, + RT5033_REG_SHDN_CTRL = 0x6A, + RT5033_REG_OFF_EVENT = 0x6B, + + RT5033_REG_END, +}; + +/* RT5033 Charger state register */ +#define RT5033_CHG_STAT_MASK 0x20 +#define RT5033_CHG_STAT_DISCHARGING 0x00 +#define RT5033_CHG_STAT_FULL 0x10 +#define RT5033_CHG_STAT_CHARGING 0x20 +#define RT5033_CHG_STAT_NOT_CHARGING 0x30 +#define RT5033_CHG_STAT_TYPE_MASK 0x60 +#define RT5033_CHG_STAT_TYPE_PRE 0x20 +#define RT5033_CHG_STAT_TYPE_FAST 0x60 + +/* RT5033 CHGCTRL1 register */ +#define RT5033_CHGCTRL1_IAICR_MASK 0xe0 +#define RT5033_CHGCTRL1_MODE_MASK 0x01 + +/* RT5033 CHGCTRL2 register */ +#define RT5033_CHGCTRL2_CV_MASK 0xfc + +/* RT5033 CHGCTRL3 register */ +#define RT5033_CHGCTRL3_CFO_EN_MASK 0x40 +#define RT5033_CHGCTRL3_TIMER_MASK 0x38 +#define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01 + +/* RT5033 CHGCTRL4 register */ +#define RT5033_CHGCTRL4_EOC_MASK 0x07 +#define RT5033_CHGCTRL4_IPREC_MASK 0x18 + +/* RT5033 CHGCTRL5 register */ +#define RT5033_CHGCTRL5_VPREC_MASK 0x0f +#define RT5033_CHGCTRL5_ICHG_MASK 0xf0 +#define RT5033_CHGCTRL5_ICHG_SHIFT 0x04 +#define RT5033_CHG_MAX_CURRENT 0x0d + +/* RT5033 RT CTRL1 register */ +#define RT5033_RT_CTRL1_UUG_MASK 0x02 +#define RT5033_RT_HZ_MASK 0x01 + +/* RT5033 control register */ +#define RT5033_CTRL_FCCM_BUCK_MASK 0x00 +#define RT5033_CTRL_BUCKOMS_MASK 0x01 +#define RT5033_CTRL_LDOOMS_MASK 0x02 +#define RT5033_CTRL_SLDOOMS_MASK 0x03 +#define RT5033_CTRL_EN_BUCK_MASK 0x04 +#define RT5033_CTRL_EN_LDO_MASK 0x05 +#define RT5033_CTRL_EN_SAFE_LDO_MASK 0x06 +#define RT5033_CTRL_LDO_SLEEP_MASK 0x07 + +/* RT5033 BUCK control register */ +#define RT5033_BUCK_CTRL_MASK 0x1f + +/* RT5033 LDO control register */ +#define RT5033_LDO_CTRL_MASK 0x1f + +/* RT5033 charger property - model, manufacturer */ + +#define RT5033_CHARGER_MODEL "RT5033WSC Charger" +#define RT5033_MANUFACTURER "Richtek Technology Corporation" + +/* + * RT5033 charger fast-charge current lmits (as in CHGCTRL1 register), + * AICR mode limits the input current for example, + * the AIRC 100 mode limits the input current to 100 mA. + */ +#define RT5033_AICR_100_MODE 0x20 +#define RT5033_AICR_500_MODE 0x40 +#define RT5033_AICR_700_MODE 0x60 +#define RT5033_AICR_900_MODE 0x80 +#define RT5033_AICR_1500_MODE 0xc0 +#define RT5033_AICR_2000_MODE 0xe0 +#define RT5033_AICR_MODE_MASK 0xe0 + +/* RT5033 use internal timer need to set time */ +#define RT5033_FAST_CHARGE_TIMER4 0x00 +#define RT5033_FAST_CHARGE_TIMER6 0x01 +#define RT5033_FAST_CHARGE_TIMER8 0x02 +#define RT5033_FAST_CHARGE_TIMER9 0x03 +#define RT5033_FAST_CHARGE_TIMER12 0x04 +#define RT5033_FAST_CHARGE_TIMER14 0x05 +#define RT5033_FAST_CHARGE_TIMER16 0x06 + +#define RT5033_INT_TIMER_ENABLE 0x01 + +/* RT5033 charger termination enable mask */ +#define RT5033_TE_ENABLE_MASK 0x08 + +/* + * RT5033 charger opa mode. RT50300 have two opa mode charger mode + * and boost mode for OTG + */ + +#define RT5033_CHARGER_MODE 0x00 +#define RT5033_BOOST_MODE 0x01 + +/* RT5033 charger termination enable */ +#define RT5033_TE_ENABLE 0x08 + +/* RT5033 charger CFO enable */ +#define RT5033_CFO_ENABLE 0x40 + +/* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */ +#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U +#define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U +#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U + +/* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */ +#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U +#define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U +#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U + +/* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */ +#define RT5033_CHARGER_FAST_CURRENT_MIN 700000U +#define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U +#define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U + +/* + * RT5033 charger const-charge end of charger current ( + * as in CHGCTRL4 register), uA + */ +#define RT5033_CHARGER_EOC_MIN 150000U +#define RT5033_CHARGER_EOC_REF 300000U +#define RT5033_CHARGER_EOC_STEP_NUM1 50000U +#define RT5033_CHARGER_EOC_STEP_NUM2 100000U +#define RT5033_CHARGER_EOC_MAX 600000U + +/* + * RT5033 charger pre-charge threshold volt limits + * (as in CHGCTRL5 register), uV + */ + +#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN 2300000U +#define RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM 100000U +#define RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX 3800000U + +/* + * RT5033 charger enable UUG, If UUG enable MOS auto control by H/W charger + * circuit. + */ +#define RT5033_CHARGER_UUG_ENABLE 0x02 + +/* RT5033 charger High impedance mode */ +#define RT5033_CHARGER_HZ_DISABLE 0x00 +#define RT5033_CHARGER_HZ_ENABLE 0x01 + +/* RT5033 regulator BUCK output voltage uV */ +#define RT5033_REGULATOR_BUCK_VOLTAGE_MIN 1000000U +#define RT5033_REGULATOR_BUCK_VOLTAGE_MAX 3000000U +#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP 100000U +#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM 32 + +/* RT5033 regulator LDO output voltage uV */ +#define RT5033_REGULATOR_LDO_VOLTAGE_MIN 1200000U +#define RT5033_REGULATOR_LDO_VOLTAGE_MAX 3000000U +#define RT5033_REGULATOR_LDO_VOLTAGE_STEP 100000U +#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM 32 + +/* RT5033 regulator SAFE LDO output voltage uV */ +#define RT5033_REGULATOR_SAFE_LDO_VOLTAGE 4900000U + +enum rt5033_fuel_reg { + RT5033_FUEL_REG_OCV_H = 0x00, + RT5033_FUEL_REG_OCV_L = 0x01, + RT5033_FUEL_REG_VBAT_H = 0x02, + RT5033_FUEL_REG_VBAT_L = 0x03, + RT5033_FUEL_REG_SOC_H = 0x04, + RT5033_FUEL_REG_SOC_L = 0x05, + RT5033_FUEL_REG_CTRL_H = 0x06, + RT5033_FUEL_REG_CTRL_L = 0x07, + RT5033_FUEL_REG_CRATE = 0x08, + RT5033_FUEL_REG_DEVICE_ID = 0x09, + RT5033_FUEL_REG_AVG_VOLT_H = 0x0A, + RT5033_FUEL_REG_AVG_VOLT_L = 0x0B, + RT5033_FUEL_REG_CONFIG_H = 0x0C, + RT5033_FUEL_REG_CONFIG_L = 0x0D, + /* Reserved 0x0E~0x0F */ + RT5033_FUEL_REG_IRQ_CTRL = 0x10, + RT5033_FUEL_REG_IRQ_FLAG = 0x11, + RT5033_FUEL_VMIN = 0x12, + RT5033_FUEL_SMIN = 0x13, + /* Reserved 0x14~0x1F */ + RT5033_FUEL_VGCOMP1 = 0x20, + RT5033_FUEL_VGCOMP2 = 0x21, + RT5033_FUEL_VGCOMP3 = 0x22, + RT5033_FUEL_VGCOMP4 = 0x23, + /* Reserved 0x24~0xFD */ + RT5033_FUEL_MFA_H = 0xFE, + RT5033_FUEL_MFA_L = 0xFF, + + RT5033_FUEL_REG_END, +}; + +/* RT5033 fuel gauge battery present property */ +#define RT5033_FUEL_BAT_PRESENT 0x02 + +/* RT5033 PMIC interrupts */ +#define RT5033_PMIC_IRQ_BUCKOCP 2 +#define RT5033_PMIC_IRQ_BUCKLV 3 +#define RT5033_PMIC_IRQ_SAFELDOLV 4 +#define RT5033_PMIC_IRQ_LDOLV 5 +#define RT5033_PMIC_IRQ_OT 6 +#define RT5033_PMIC_IRQ_VDDA_UV 7 + +#endif /* __RT5033_PRIVATE_H__ */ diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h new file mode 100644 index 000000000000..010cff49a98e --- /dev/null +++ b/include/linux/mfd/rt5033.h @@ -0,0 +1,62 @@ +/* + * MFD core driver for the RT5033 + * + * Copyright (C) 2014 Samsung Electronics + * Author: Beomho Seo <beomho.seo@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published bythe Free Software Foundation. + */ + +#ifndef __RT5033_H__ +#define __RT5033_H__ + +#include <linux/regulator/consumer.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/power_supply.h> + +/* RT5033 regulator IDs */ +enum rt5033_regulators { + RT5033_BUCK = 0, + RT5033_LDO, + RT5033_SAFE_LDO, + + RT5033_REGULATOR_NUM, +}; + +struct rt5033_dev { + struct device *dev; + + struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; + int irq; + bool wakeup; +}; + +struct rt5033_battery { + struct i2c_client *client; + struct rt5033_dev *rt5033; + struct regmap *regmap; + struct power_supply psy; +}; + +/* RT5033 charger platform data */ +struct rt5033_charger_data { + unsigned int pre_uamp; + unsigned int pre_uvolt; + unsigned int const_uvolt; + unsigned int eoc_uamp; + unsigned int fast_uamp; +}; + +struct rt5033_charger { + struct device *dev; + struct rt5033_dev *rt5033; + struct power_supply psy; + + struct rt5033_charger_data *chg; +}; + +#endif /* __RT5033_H__ */ |