diff options
442 files changed, 17066 insertions, 6603 deletions
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt index 5fe9372abb37..26ca25b6d264 100644 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -3,7 +3,8 @@ G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. Required properties: -- compatible: should be "samsung,exynos5-gsc" +- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and + 5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433) - reg: should contain G-Scaler physical address location and length. - interrupts: should contain G-Scaler interrupt number diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt index 8337f75c75da..9cbd92eb5d05 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt @@ -34,6 +34,7 @@ The digital output port node must contain at least one endpoint. Optional Properties: - reset-gpios: Reference to the GPIO connected to the device's reset pin. + - default-input: Select which input is selected after reset. Optional Endpoint Properties: @@ -47,8 +48,6 @@ Optional Endpoint Properties: If none of hsync-active, vsync-active and pclk-sample is specified the endpoint will use embedded BT.656 synchronization. - - default-input: Select which input is selected after reset. - Example: hdmi_receiver@4c { diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt new file mode 100644 index 000000000000..4182063a54db --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt @@ -0,0 +1,109 @@ +* Mediatek Media Data Path + +Media Data Path is used for scaling and color space conversion. + +Required properties (controller (parent) node): +- compatible: "mediatek,mt8173-mdp" +- mediatek,vpu: the node of video processor unit, see + Documentation/devicetree/bindings/media/mediatek-vpu.txt for details. + +Required properties (all function blocks, child node): +- compatible: Should be one of + "mediatek,mt8173-mdp-rdma" - read DMA + "mediatek,mt8173-mdp-rsz" - resizer + "mediatek,mt8173-mdp-wdma" - write DMA + "mediatek,mt8173-mdp-wrot" - write DMA with rotation +- reg: Physical base address and length of the function block register space +- clocks: device clocks, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- power-domains: a phandle to the power domain, see + Documentation/devicetree/bindings/power/power_domain.txt for details. + +Required properties (DMA function blocks, child node): +- compatible: Should be one of + "mediatek,mt8173-mdp-rdma" + "mediatek,mt8173-mdp-wdma" + "mediatek,mt8173-mdp-wrot" +- iommus: should point to the respective IOMMU block with master port as + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. +- mediatek,larb: must contain the local arbiters in the current Socs, see + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + for details. + +Example: +mdp { + compatible = "mediatek,mt8173-mdp"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + mediatek,vpu = <&vpu>; + + mdp_rdma0: rdma@14001000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mediatek,larb = <&larb0>; + }; + + mdp_rdma1: rdma@14002000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA1>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA1>; + mediatek,larb = <&larb4>; + }; + + mdp_rsz0: rsz@14003000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz1: rsz@14004000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz2: rsz@14005000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_wdma0: wdma@14006000 { + compatible = "mediatek,mt8173-mdp-wdma"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WDMA>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WDMA>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot0: wrot@14007000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot1: wrot@14008000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14008000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT1>; + mediatek,larb = <&larb4>; + }; +}; diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 59a47a5b924b..46c15c54175d 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -1,25 +1,74 @@ Mediatek Video Codec Mediatek Video Codec is the video codec hw present in Mediatek SoCs which -supports high resolution encoding functionalities. +supports high resolution encoding and decoding functionalities. Required properties: - compatible : "mediatek,mt8173-vcodec-enc" for encoder + "mediatek,mt8173-vcodec-dec" for decoder. - reg : Physical base address of the video codec registers and length of memory mapped region. - interrupts : interrupt number to the cpu. - mediatek,larb : must contain the local arbiters in the current Socs. - clocks : list of clock specifiers, corresponding to entries in the clock-names property. -- clock-names: encoder must contain "venc_sel_src", "venc_sel", -- "venc_lt_sel_src", "venc_lt_sel". +- clock-names: encoder must contain "venc_sel_src", "venc_sel",, + "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll", + "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", + "venc_lt_sel", "vdec_bus_clk_src". - iommus : should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. - mediatek,vpu : the node of video processor unit + Example: -vcodec_enc: vcodec@0x18002000 { + +vcodec_dec: vcodec@16000000 { + compatible = "mediatek,mt8173-vcodec-dec"; + reg = <0 0x16000000 0 0x100>, /*VDEC_SYS*/ + <0 0x16020000 0 0x1000>, /*VDEC_MISC*/ + <0 0x16021000 0 0x800>, /*VDEC_LD*/ + <0 0x16021800 0 0x800>, /*VDEC_TOP*/ + <0 0x16022000 0 0x1000>, /*VDEC_CM*/ + <0 0x16023000 0 0x1000>, /*VDEC_AD*/ + <0 0x16024000 0 0x1000>, /*VDEC_AV*/ + <0 0x16025000 0 0x1000>, /*VDEC_PP*/ + <0 0x16026800 0 0x800>, /*VP8_VD*/ + <0 0x16027000 0 0x800>, /*VP6_VD*/ + <0 0x16027800 0 0x800>, /*VP8_VL*/ + <0 0x16028400 0 0x400>; /*VP9_VD*/ + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + mediatek,larb = <&larb1>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; + mediatek,vpu = <&vpu>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&topckgen CLK_TOP_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>, + <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; + clock-names = "vcodecpll", + "univpll_d2", + "clk_cci400_sel", + "vdec_sel", + "vdecpll", + "vencpll", + "venc_lt_sel", + "vdec_bus_clk_src"; + }; + + vcodec_enc: vcodec@0x18002000 { compatible = "mediatek,mt8173-vcodec-enc"; reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/ <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/ diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt new file mode 100644 index 000000000000..8dd1007bb573 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,fdp1.txt @@ -0,0 +1,37 @@ +Renesas R-Car Fine Display Processor (FDP1) +------------------------------------------- + +The FDP1 is a de-interlacing module which converts interlaced video to +progressive video. It is capable of performing pixel format conversion between +YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as +an input to the module. + +Required properties: + + - compatible: must be "renesas,fdp1" + - reg: the register base and size for the device registers + - interrupts : interrupt specifier for the FDP1 instance + - clocks: reference to the functional clock + +Optional properties: + + - power-domains: reference to the power domain that the FDP1 belongs to, if + any. + - renesas,fcp: a phandle referencing the FCP that handles memory accesses + for the FDP1. Not needed on Gen2, mandatory on Gen3. + +Please refer to the binding documentation for the clock and/or power domain +providers for more details. + + +Device node example +------------------- + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7795_PD_A3VP>; + renesas,fcp = <&fcpf0>; + }; diff --git a/Documentation/media/Makefile b/Documentation/media/Makefile index a7fb35291f6c..61afa052c501 100644 --- a/Documentation/media/Makefile +++ b/Documentation/media/Makefile @@ -51,7 +51,7 @@ $(BUILDDIR)/videodev2.h.rst: ${UAPI}/videodev2.h ${PARSER} $(SRC_DIR)/videodev2. $(BUILDDIR)/media.h.rst: ${UAPI}/media.h ${PARSER} $(SRC_DIR)/media.h.rst.exceptions @$($(quiet)gen_rst) -$(BUILDDIR)/cec.h.rst: ${KAPI}/cec.h ${PARSER} $(SRC_DIR)/cec.h.rst.exceptions +$(BUILDDIR)/cec.h.rst: ${UAPI}/cec.h ${PARSER} $(SRC_DIR)/cec.h.rst.exceptions @$($(quiet)gen_rst) $(BUILDDIR)/lirc.h.rst: ${UAPI}/lirc.h ${PARSER} $(SRC_DIR)/lirc.h.rst.exceptions diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst index 88c33b53ec13..8a88dd4ce3d4 100644 --- a/Documentation/media/kapi/cec-core.rst +++ b/Documentation/media/kapi/cec-core.rst @@ -106,13 +106,13 @@ your driver: int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg); - void (\*adap_log_status)(struct cec_adapter *adap); + void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); /* High-level callbacks */ ... }; -The three low-level ops deal with various aspects of controlling the CEC adapter +The five low-level ops deal with various aspects of controlling the CEC adapter hardware: @@ -238,6 +238,18 @@ When a CEC message was received: Speaks for itself. +Implementing the interrupt handler +---------------------------------- + +Typically the CEC hardware provides interrupts that signal when a transmit +finished and whether it was successful or not, and it provides and interrupt +when a CEC message was received. + +The CEC driver should always process the transmit interrupts first before +handling the receive interrupt. The framework expects to see the cec_transmit_done +call before the cec_received_msg call, otherwise it can get confused if the +received message was in reply to the transmitted message. + Implementing the High-Level CEC Adapter --------------------------------------- @@ -247,11 +259,11 @@ CEC protocol driven. The following high-level callbacks are available: .. code-block:: none struct cec_adap_ops { - /\* Low-level callbacks \*/ + /* Low-level callbacks */ ... - /\* High-level CEC message callback \*/ - int (\*received)(struct cec_adapter \*adap, struct cec_msg \*msg); + /* High-level CEC message callback */ + int (*received)(struct cec_adapter *adap, struct cec_msg *msg); }; The received() callback allows the driver to optionally handle a newly @@ -263,7 +275,7 @@ received CEC message If the driver wants to process a CEC message, then it can implement this callback. If it doesn't want to handle this message, then it should return -ENOMSG, otherwise the CEC framework assumes it processed this message and -it will not no anything with it. +it will not do anything with it. CEC framework functions diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst index a35dca281178..2b0ddb14b280 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst @@ -48,41 +48,21 @@ returns the information to the application. The ioctl never fails. :stub-columns: 0 :widths: 1 1 16 - - - .. row 1 - - - char - - - ``driver[32]`` - - - The name of the cec adapter driver. - - - .. row 2 - - - char - - - ``name[32]`` - - - The name of this CEC adapter. The combination ``driver`` and - ``name`` must be unique. - - - .. row 3 - - - __u32 - - - ``capabilities`` - - - The capabilities of the CEC adapter, see - :ref:`cec-capabilities`. - - - .. row 4 - - - __u32 - - - ``version`` - - - CEC Framework API version, formatted with the ``KERNEL_VERSION()`` - macro. + * - char + - ``driver[32]`` + - The name of the cec adapter driver. + * - char + - ``name[32]`` + - The name of this CEC adapter. The combination ``driver`` and + ``name`` must be unique. + * - __u32 + - ``capabilities`` + - The capabilities of the CEC adapter, see + :ref:`cec-capabilities`. + * - __u32 + - ``version`` + - CEC Framework API version, formatted with the ``KERNEL_VERSION()`` + macro. .. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}| @@ -94,68 +74,50 @@ returns the information to the application. The ioctl never fails. :stub-columns: 0 :widths: 3 1 8 - - - .. _`CEC-CAP-PHYS-ADDR`: - - - ``CEC_CAP_PHYS_ADDR`` - - - 0x00000001 - - - Userspace has to configure the physical address by calling - :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If - this capability isn't set, then setting the physical address is - handled by the kernel whenever the EDID is set (for an HDMI - receiver) or read (for an HDMI transmitter). - - - .. _`CEC-CAP-LOG-ADDRS`: - - - ``CEC_CAP_LOG_ADDRS`` - - - 0x00000002 - - - Userspace has to configure the logical addresses by calling - :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If - this capability isn't set, then the kernel will have configured - this. - - - .. _`CEC-CAP-TRANSMIT`: - - - ``CEC_CAP_TRANSMIT`` - - - 0x00000004 - - - Userspace can transmit CEC messages by calling - :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that - userspace can be a follower as well, since being able to transmit - messages is a prerequisite of becoming a follower. If this - capability isn't set, then the kernel will handle all CEC - transmits and process all CEC messages it receives. - - - .. _`CEC-CAP-PASSTHROUGH`: - - - ``CEC_CAP_PASSTHROUGH`` - - - 0x00000008 - - - Userspace can use the passthrough mode by calling - :ref:`ioctl CEC_S_MODE <CEC_S_MODE>`. - - - .. _`CEC-CAP-RC`: - - - ``CEC_CAP_RC`` - - - 0x00000010 - - - This adapter supports the remote control protocol. - - - .. _`CEC-CAP-MONITOR-ALL`: - - - ``CEC_CAP_MONITOR_ALL`` - - - 0x00000020 - - - The CEC hardware can monitor all messages, not just directed and - broadcast messages. + * .. _`CEC-CAP-PHYS-ADDR`: + + - ``CEC_CAP_PHYS_ADDR`` + - 0x00000001 + - Userspace has to configure the physical address by calling + :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`. If + this capability isn't set, then setting the physical address is + handled by the kernel whenever the EDID is set (for an HDMI + receiver) or read (for an HDMI transmitter). + * .. _`CEC-CAP-LOG-ADDRS`: + + - ``CEC_CAP_LOG_ADDRS`` + - 0x00000002 + - Userspace has to configure the logical addresses by calling + :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. If + this capability isn't set, then the kernel will have configured + this. + * .. _`CEC-CAP-TRANSMIT`: + + - ``CEC_CAP_TRANSMIT`` + - 0x00000004 + - Userspace can transmit CEC messages by calling + :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. This implies that + userspace can be a follower as well, since being able to transmit + messages is a prerequisite of becoming a follower. If this + capability isn't set, then the kernel will handle all CEC + transmits and process all CEC messages it receives. + * .. _`CEC-CAP-PASSTHROUGH`: + + - ``CEC_CAP_PASSTHROUGH`` + - 0x00000008 + - Userspace can use the passthrough mode by calling + :ref:`ioctl CEC_S_MODE <CEC_S_MODE>`. + * .. _`CEC-CAP-RC`: + + - ``CEC_CAP_RC`` + - 0x00000010 + - This adapter supports the remote control protocol. + * .. _`CEC-CAP-MONITOR-ALL`: + + - ``CEC_CAP_MONITOR_ALL`` + - 0x00000020 + - The CEC hardware can monitor all messages, not just directed and + broadcast messages. diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index 940a16d8d55e..b878637e91b3 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -77,134 +77,79 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 1 1 16 - - - .. row 1 - - - __u8 - - - ``log_addr[CEC_MAX_LOG_ADDRS]`` - - - The actual logical addresses that were claimed. This is set by the - driver. If no logical address could be claimed, then it is set to - ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then - ``log_addr[0]`` is set to 0xf and all others to - ``CEC_LOG_ADDR_INVALID``. - - - .. row 2 - - - __u16 - - - ``log_addr_mask`` - - - The bitmask of all logical addresses this adapter has claimed. If - this adapter is Unregistered then ``log_addr_mask`` sets bit 15 - and clears all other bits. If this adapter is not configured at - all, then ``log_addr_mask`` is set to 0. Set by the driver. - - - .. row 3 - - - __u8 - - - ``cec_version`` - - - The CEC version that this adapter shall use. See - :ref:`cec-versions`. Used to implement the - ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages. - Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC - framework. - - - .. row 4 - - - __u8 - - - ``num_log_addrs`` - - - Number of logical addresses to set up. Must be ≤ - ``available_log_addrs`` as returned by - :ref:`CEC_ADAP_G_CAPS`. All arrays in - this structure are only filled up to index - ``available_log_addrs``-1. The remaining array elements will be - ignored. Note that the CEC 2.0 standard allows for a maximum of 2 - logical addresses, although some hardware has support for more. - ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual - number of logical addresses it could claim, which may be less than - what was requested. If this field is set to 0, then the CEC - adapter shall clear all claimed logical addresses and all other - fields will be ignored. - - - .. row 5 - - - __u32 - - - ``vendor_id`` - - - The vendor ID is a 24-bit number that identifies the specific - vendor or entity. Based on this ID vendor specific commands may be - defined. If you do not want a vendor ID then set it to - ``CEC_VENDOR_ID_NONE``. - - - .. row 6 - - - __u32 - - - ``flags`` - - - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags. - - - .. row 7 - - - char - - - ``osd_name[15]`` - - - The On-Screen Display name as is returned by the - ``CEC_MSG_SET_OSD_NAME`` message. - - - .. row 8 - - - __u8 - - - ``primary_device_type[CEC_MAX_LOG_ADDRS]`` - - - Primary device type for each logical address. See - :ref:`cec-prim-dev-types` for possible types. - - - .. row 9 - - - __u8 - - - ``log_addr_type[CEC_MAX_LOG_ADDRS]`` - - - Logical address types. See :ref:`cec-log-addr-types` for - possible types. The driver will update this with the actual - logical address type that it claimed (e.g. it may have to fallback - to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`). - - - .. row 10 - - - __u8 - - - ``all_device_types[CEC_MAX_LOG_ADDRS]`` - - - CEC 2.0 specific: the bit mask of all device types. See - :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0 - ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave - this field to 0, or fill it in according to the CEC 2.0 guidelines to - give the CEC framework more information about the device type, even - though the framework won't use it directly in the CEC message. - - - .. row 11 - - - __u8 - - - ``features[CEC_MAX_LOG_ADDRS][12]`` - - - Features for each logical address. It is used in the CEC 2.0 - ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the - RC Profile and the Device Features. For CEC 1.4 you can either leave - this field to all 0, or fill it in according to the CEC 2.0 guidelines to - give the CEC framework more information about the device type, even - though the framework won't use it directly in the CEC message. + * - __u8 + - ``log_addr[CEC_MAX_LOG_ADDRS]`` + - The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then + ``log_addr[0]`` is set to 0xf and all others to + ``CEC_LOG_ADDR_INVALID``. + * - __u16 + - ``log_addr_mask`` + - The bitmask of all logical addresses this adapter has claimed. If + this adapter is Unregistered then ``log_addr_mask`` sets bit 15 + and clears all other bits. If this adapter is not configured at + all, then ``log_addr_mask`` is set to 0. Set by the driver. + * - __u8 + - ``cec_version`` + - The CEC version that this adapter shall use. See + :ref:`cec-versions`. Used to implement the + ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages. + Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC + framework. + * - __u8 + - ``num_log_addrs`` + - Number of logical addresses to set up. Must be ≤ + ``available_log_addrs`` as returned by + :ref:`CEC_ADAP_G_CAPS`. All arrays in + this structure are only filled up to index + ``available_log_addrs``-1. The remaining array elements will be + ignored. Note that the CEC 2.0 standard allows for a maximum of 2 + logical addresses, although some hardware has support for more. + ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual + number of logical addresses it could claim, which may be less than + what was requested. If this field is set to 0, then the CEC + adapter shall clear all claimed logical addresses and all other + fields will be ignored. + * - __u32 + - ``vendor_id`` + - The vendor ID is a 24-bit number that identifies the specific + vendor or entity. Based on this ID vendor specific commands may be + defined. If you do not want a vendor ID then set it to + ``CEC_VENDOR_ID_NONE``. + * - __u32 + - ``flags`` + - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags. + * - char + - ``osd_name[15]`` + - The On-Screen Display name as is returned by the + ``CEC_MSG_SET_OSD_NAME`` message. + * - __u8 + - ``primary_device_type[CEC_MAX_LOG_ADDRS]`` + - Primary device type for each logical address. See + :ref:`cec-prim-dev-types` for possible types. + * - __u8 + - ``log_addr_type[CEC_MAX_LOG_ADDRS]`` + - Logical address types. See :ref:`cec-log-addr-types` for + possible types. The driver will update this with the actual + logical address type that it claimed (e.g. it may have to fallback + to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`). + * - __u8 + - ``all_device_types[CEC_MAX_LOG_ADDRS]`` + - CEC 2.0 specific: the bit mask of all device types. See + :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0 + ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave + this field to 0, or fill it in according to the CEC 2.0 guidelines to + give the CEC framework more information about the device type, even + though the framework won't use it directly in the CEC message. + * - __u8 + - ``features[CEC_MAX_LOG_ADDRS][12]`` + - Features for each logical address. It is used in the CEC 2.0 + ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the + RC Profile and the Device Features. For CEC 1.4 you can either leave + this field to all 0, or fill it in according to the CEC 2.0 guidelines to + give the CEC framework more information about the device type, even + though the framework won't use it directly in the CEC message. .. _cec-log-addrs-flags: @@ -213,17 +158,33 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`: + + - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK`` + - 1 + - By default if no logical address of the requested type can be claimed, then + it will go back to the unconfigured state. If this flag is set, then it will + fallback to the Unregistered logical address. Note that if the Unregistered + logical address was explicitly requested, then this flag has no effect. + * .. _`CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU`: - - .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`: + - ``CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU`` + - 2 + - By default the ``CEC_MSG_USER_CONTROL_PRESSED`` and ``CEC_MSG_USER_CONTROL_RELEASED`` + messages are only passed on to the follower(s), if any. If this flag is set, + then these messages are also passed on to the remote control input subsystem + and will appear as keystrokes. This features needs to be enabled explicitly. + If CEC is used to enter e.g. passwords, then you may not want to enable this + to avoid trivial snooping of the keystrokes. + * .. _`CEC-LOG-ADDRS-FL-CDC-ONLY`: - - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK`` + - `CEC_LOG_ADDRS_FL_CDC_ONLY` + - 4 + - If this flag is set, then the device is CDC-Only. CDC-Only CEC devices + are CEC devices that can only handle CDC messages. - - 1 + All other messages are ignored. - - By default if no logical address of the requested type can be claimed, then - it will go back to the unconfigured state. If this flag is set, then it will - fallback to the Unregistered logical address. Note that if the Unregistered - logical address was explicitly requested, then this flag has no effect. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -234,30 +195,21 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-OP-CEC-VERSION-1-3A`: - - .. _`CEC-OP-CEC-VERSION-1-3A`: - - - ``CEC_OP_CEC_VERSION_1_3A`` - - - 4 - - - CEC version according to the HDMI 1.3a standard. - - - .. _`CEC-OP-CEC-VERSION-1-4B`: - - - ``CEC_OP_CEC_VERSION_1_4B`` + - ``CEC_OP_CEC_VERSION_1_3A`` + - 4 + - CEC version according to the HDMI 1.3a standard. + * .. _`CEC-OP-CEC-VERSION-1-4B`: - - 5 + - ``CEC_OP_CEC_VERSION_1_4B`` + - 5 + - CEC version according to the HDMI 1.4b standard. + * .. _`CEC-OP-CEC-VERSION-2-0`: - - CEC version according to the HDMI 1.4b standard. - - - .. _`CEC-OP-CEC-VERSION-2-0`: - - - ``CEC_OP_CEC_VERSION_2_0`` - - - 6 - - - CEC version according to the HDMI 2.0 standard. + - ``CEC_OP_CEC_VERSION_2_0`` + - 6 + - CEC version according to the HDMI 2.0 standard. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -269,62 +221,41 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-OP-PRIM-DEVTYPE-TV`: - - .. _`CEC-OP-PRIM-DEVTYPE-TV`: - - - ``CEC_OP_PRIM_DEVTYPE_TV`` - - - 0 - - - Use for a TV. + - ``CEC_OP_PRIM_DEVTYPE_TV`` + - 0 + - Use for a TV. + * .. _`CEC-OP-PRIM-DEVTYPE-RECORD`: - - .. _`CEC-OP-PRIM-DEVTYPE-RECORD`: + - ``CEC_OP_PRIM_DEVTYPE_RECORD`` + - 1 + - Use for a recording device. + * .. _`CEC-OP-PRIM-DEVTYPE-TUNER`: - - ``CEC_OP_PRIM_DEVTYPE_RECORD`` + - ``CEC_OP_PRIM_DEVTYPE_TUNER`` + - 3 + - Use for a device with a tuner. + * .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`: - - 1 + - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK`` + - 4 + - Use for a playback device. + * .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`: - - Use for a recording device. + - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM`` + - 5 + - Use for an audio system (e.g. an audio/video receiver). + * .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`: - - .. _`CEC-OP-PRIM-DEVTYPE-TUNER`: + - ``CEC_OP_PRIM_DEVTYPE_SWITCH`` + - 6 + - Use for a CEC switch. + * .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`: - - ``CEC_OP_PRIM_DEVTYPE_TUNER`` - - - 3 - - - Use for a device with a tuner. - - - .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`: - - - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK`` - - - 4 - - - Use for a playback device. - - - .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`: - - - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM`` - - - 5 - - - Use for an audio system (e.g. an audio/video receiver). - - - .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`: - - - ``CEC_OP_PRIM_DEVTYPE_SWITCH`` - - - 6 - - - Use for a CEC switch. - - - .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`: - - - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC`` - - - 7 - - - Use for a video processor device. + - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC`` + - 7 + - Use for a video processor device. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| @@ -336,64 +267,43 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 16 + * .. _`CEC-LOG-ADDR-TYPE-TV`: - - .. _`CEC-LOG-ADDR-TYPE-TV`: - - - ``CEC_LOG_ADDR_TYPE_TV`` - - - 0 - - - Use for a TV. - - - .. _`CEC-LOG-ADDR-TYPE-RECORD`: - - - ``CEC_LOG_ADDR_TYPE_RECORD`` - - - 1 - - - Use for a recording device. - - - .. _`CEC-LOG-ADDR-TYPE-TUNER`: - - - ``CEC_LOG_ADDR_TYPE_TUNER`` - - - 2 - - - Use for a tuner device. + - ``CEC_LOG_ADDR_TYPE_TV`` + - 0 + - Use for a TV. + * .. _`CEC-LOG-ADDR-TYPE-RECORD`: - - .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`: + - ``CEC_LOG_ADDR_TYPE_RECORD`` + - 1 + - Use for a recording device. + * .. _`CEC-LOG-ADDR-TYPE-TUNER`: - - ``CEC_LOG_ADDR_TYPE_PLAYBACK`` + - ``CEC_LOG_ADDR_TYPE_TUNER`` + - 2 + - Use for a tuner device. + * .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`: - - 3 + - ``CEC_LOG_ADDR_TYPE_PLAYBACK`` + - 3 + - Use for a playback device. + * .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`: - - Use for a playback device. + - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM`` + - 4 + - Use for an audio system device. + * .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`: - - .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`: + - ``CEC_LOG_ADDR_TYPE_SPECIFIC`` + - 5 + - Use for a second TV or for a video processor device. + * .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`: - - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM`` - - - 4 - - - Use for an audio system device. - - - .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`: - - - ``CEC_LOG_ADDR_TYPE_SPECIFIC`` - - - 5 - - - Use for a second TV or for a video processor device. - - - .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`: - - - ``CEC_LOG_ADDR_TYPE_UNREGISTERED`` - - - 6 - - - Use this if you just want to remain unregistered. Used for pure - CEC switches or CDC-only devices (CDC: Capability Discovery and - Control). + - ``CEC_LOG_ADDR_TYPE_UNREGISTERED`` + - 6 + - Use this if you just want to remain unregistered. Used for pure + CEC switches or CDC-only devices (CDC: Capability Discovery and + Control). @@ -406,54 +316,36 @@ logical address types are already defined will return with error ``EBUSY``. :stub-columns: 0 :widths: 3 1 4 + * .. _`CEC-OP-ALL-DEVTYPE-TV`: - - .. _`CEC-OP-ALL-DEVTYPE-TV`: - - - ``CEC_OP_ALL_DEVTYPE_TV`` - - - 0x80 - - - This supports the TV type. - - - .. _`CEC-OP-ALL-DEVTYPE-RECORD`: - - - ``CEC_OP_ALL_DEVTYPE_RECORD`` - - - 0x40 - - - This supports the Recording type. - - - .. _`CEC-OP-ALL-DEVTYPE-TUNER`: - - - ``CEC_OP_ALL_DEVTYPE_TUNER`` - - - 0x20 - - - This supports the Tuner type. - - - .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`: - - - ``CEC_OP_ALL_DEVTYPE_PLAYBACK`` - - - 0x10 - - - This supports the Playback type. - - - .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`: - - - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM`` - - - 0x08 + - ``CEC_OP_ALL_DEVTYPE_TV`` + - 0x80 + - This supports the TV type. + * .. _`CEC-OP-ALL-DEVTYPE-RECORD`: - - This supports the Audio System type. + - ``CEC_OP_ALL_DEVTYPE_RECORD`` + - 0x40 + - This supports the Recording type. + * .. _`CEC-OP-ALL-DEVTYPE-TUNER`: - - .. _`CEC-OP-ALL-DEVTYPE-SWITCH`: + - ``CEC_OP_ALL_DEVTYPE_TUNER`` + - 0x20 + - This supports the Tuner type. + * .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`: - - ``CEC_OP_ALL_DEVTYPE_SWITCH`` + - ``CEC_OP_ALL_DEVTYPE_PLAYBACK`` + - 0x10 + - This supports the Playback type. + * .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`: - - 0x04 + - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM`` + - 0x08 + - This supports the Audio System type. + * .. _`CEC-OP-ALL-DEVTYPE-SWITCH`: - - This supports the CEC Switch or Video Processing type. + - ``CEC_OP_ALL_DEVTYPE_SWITCH`` + - 0x04 + - This supports the CEC Switch or Video Processing type. diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst index e283588a830b..e256c6605de7 100644 --- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst +++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst @@ -58,26 +58,16 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 1 1 8 - - - .. row 1 - - - __u16 - - - ``phys_addr`` - - - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no + * - __u16 + - ``phys_addr`` + - The current physical address. This is ``CEC_PHYS_ADDR_INVALID`` if no valid physical address is set. - - - .. row 2 - - - __u16 - - - ``log_addr_mask`` - - - The current set of claimed logical addresses. This is 0 if no logical - addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``. - If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device - has the unregistered logical address. In that case all other bits are 0. + * - __u16 + - ``log_addr_mask`` + - The current set of claimed logical addresses. This is 0 if no logical + addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``. + If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device + has the unregistered logical address. In that case all other bits are 0. .. c:type:: cec_event_lost_msgs @@ -89,22 +79,17 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 1 1 16 - - - .. row 1 - - - __u32 - - - ``lost_msgs`` - - - Set to the number of lost messages since the filehandle was opened - or since the last time this event was dequeued for this - filehandle. The messages lost are the oldest messages. So when a - new message arrives and there is no more room, then the oldest - message is discarded to make room for the new one. The internal - size of the message queue guarantees that all messages received in - the last two seconds will be stored. Since messages should be - replied to within a second according to the CEC specification, - this is more than enough. + * - __u32 + - ``lost_msgs`` + - Set to the number of lost messages since the filehandle was opened + or since the last time this event was dequeued for this + filehandle. The messages lost are the oldest messages. So when a + new message arrives and there is no more room, then the oldest + message is discarded to make room for the new one. The internal + size of the message queue guarantees that all messages received in + the last two seconds will be stored. Since messages should be + replied to within a second according to the CEC specification, + this is more than enough. .. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{2.5cm}|p{8.8cm}| @@ -116,62 +101,32 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 1 1 1 8 - - - .. row 1 - - - __u64 - - - ``ts`` - - - :cspan:`1` Timestamp of the event in ns. - - The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access - the same clock from userspace use :c:func:`clock_gettime`. - - - .. row 2 - - - __u32 - - - ``event`` - - - :cspan:`1` The CEC event type, see :ref:`cec-events`. - - - .. row 3 - - - __u32 - - - ``flags`` - - - :cspan:`1` Event flags, see :ref:`cec-event-flags`. - - - .. row 4 - - - union - - - (anonymous) - - - - - - - - .. row 5 - - - - - struct cec_event_state_change - - - ``state_change`` - - - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` - event. - - - .. row 6 - - - - - struct cec_event_lost_msgs - - - ``lost_msgs`` - - - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>` - event. + * - __u64 + - ``ts`` + - :cspan:`1` Timestamp of the event in ns. + + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access + the same clock from userspace use :c:func:`clock_gettime`. + * - __u32 + - ``event`` + - :cspan:`1` The CEC event type, see :ref:`cec-events`. + * - __u32 + - ``flags`` + - :cspan:`1` Event flags, see :ref:`cec-event-flags`. + * - union + - (anonymous) + - + - + * - + - struct cec_event_state_change + - ``state_change`` + - The new adapter state as sent by the :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` + event. + * - + - struct cec_event_lost_msgs + - ``lost_msgs`` + - The number of lost messages as sent by the :ref:`CEC_EVENT_LOST_MSGS <CEC-EVENT-LOST-MSGS>` + event. .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| @@ -183,25 +138,19 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 3 1 16 + * .. _`CEC-EVENT-STATE-CHANGE`: - - .. _`CEC-EVENT-STATE-CHANGE`: - - - ``CEC_EVENT_STATE_CHANGE`` - - - 1 - - - Generated when the CEC Adapter's state changes. When open() is - called an initial event will be generated for that filehandle with - the CEC Adapter's state at that time. - - - .. _`CEC-EVENT-LOST-MSGS`: + - ``CEC_EVENT_STATE_CHANGE`` + - 1 + - Generated when the CEC Adapter's state changes. When open() is + called an initial event will be generated for that filehandle with + the CEC Adapter's state at that time. + * .. _`CEC-EVENT-LOST-MSGS`: - - ``CEC_EVENT_LOST_MSGS`` - - - 2 - - - Generated if one or more CEC messages were lost because the - application didn't dequeue CEC messages fast enough. + - ``CEC_EVENT_LOST_MSGS`` + - 2 + - Generated if one or more CEC messages were lost because the + application didn't dequeue CEC messages fast enough. .. tabularcolumns:: |p{6.0cm}|p{0.6cm}|p{10.9cm}| @@ -213,17 +162,14 @@ it is guaranteed that the state did change in between the two events. :stub-columns: 0 :widths: 3 1 8 + * .. _`CEC-EVENT-FL-INITIAL-VALUE`: - - .. _`CEC-EVENT-FL-INITIAL-VALUE`: - - - ``CEC_EVENT_FL_INITIAL_VALUE`` - - - 1 - - - Set for the initial events that are generated when the device is - opened. See the table above for which events do this. This allows - applications to learn the initial state of the CEC adapter at - open() time. + - ``CEC_EVENT_FL_INITIAL_VALUE`` + - 1 + - Set for the initial events that are generated when the device is + opened. See the table above for which events do this. This allows + applications to learn the initial state of the CEC adapter at + open() time. diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst index 70a41902ab58..4f5818b9d277 100644 --- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst +++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst @@ -83,37 +83,28 @@ Available initiator modes are: :stub-columns: 0 :widths: 3 1 16 - - - .. _`CEC-MODE-NO-INITIATOR`: - - - ``CEC_MODE_NO_INITIATOR`` - - - 0x0 - - - This is not an initiator, i.e. it cannot transmit CEC messages or - make any other changes to the CEC adapter. - - - .. _`CEC-MODE-INITIATOR`: - - - ``CEC_MODE_INITIATOR`` - - - 0x1 - - - This is an initiator (the default when the device is opened) and - it can transmit CEC messages and make changes to the CEC adapter, - unless there is an exclusive initiator. - - - .. _`CEC-MODE-EXCL-INITIATOR`: - - - ``CEC_MODE_EXCL_INITIATOR`` - - - 0x2 - - - This is an exclusive initiator and this file descriptor is the - only one that can transmit CEC messages and make changes to the - CEC adapter. If someone else is already the exclusive initiator - then an attempt to become one will return the ``EBUSY`` error code - error. + * .. _`CEC-MODE-NO-INITIATOR`: + + - ``CEC_MODE_NO_INITIATOR`` + - 0x0 + - This is not an initiator, i.e. it cannot transmit CEC messages or + make any other changes to the CEC adapter. + * .. _`CEC-MODE-INITIATOR`: + + - ``CEC_MODE_INITIATOR`` + - 0x1 + - This is an initiator (the default when the device is opened) and + it can transmit CEC messages and make changes to the CEC adapter, + unless there is an exclusive initiator. + * .. _`CEC-MODE-EXCL-INITIATOR`: + + - ``CEC_MODE_EXCL_INITIATOR`` + - 0x2 + - This is an exclusive initiator and this file descriptor is the + only one that can transmit CEC messages and make changes to the + CEC adapter. If someone else is already the exclusive initiator + then an attempt to become one will return the ``EBUSY`` error code + error. Available follower modes are: @@ -127,86 +118,68 @@ Available follower modes are: :stub-columns: 0 :widths: 3 1 16 - - - .. _`CEC-MODE-NO-FOLLOWER`: - - - ``CEC_MODE_NO_FOLLOWER`` - - - 0x00 - - - This is not a follower (the default when the device is opened). - - - .. _`CEC-MODE-FOLLOWER`: - - - ``CEC_MODE_FOLLOWER`` - - - 0x10 - - - This is a follower and it will receive CEC messages unless there - is an exclusive follower. You cannot become a follower if - :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` - was specified, the ``EINVAL`` error code is returned in that case. - - - .. _`CEC-MODE-EXCL-FOLLOWER`: - - - ``CEC_MODE_EXCL_FOLLOWER`` - - - 0x20 - - - This is an exclusive follower and only this file descriptor will - receive CEC messages for processing. If someone else is already - the exclusive follower then an attempt to become one will return - the ``EBUSY`` error code. You cannot become a follower if - :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` - was specified, the ``EINVAL`` error code is returned in that case. - - - .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`: - - - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU`` - - - 0x30 - - - This is an exclusive follower and only this file descriptor will - receive CEC messages for processing. In addition it will put the - CEC device into passthrough mode, allowing the exclusive follower - to handle most core messages instead of relying on the CEC - framework for that. If someone else is already the exclusive - follower then an attempt to become one will return the ``EBUSY`` error - code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` - is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` was specified, - the ``EINVAL`` error code is returned in that case. - - - .. _`CEC-MODE-MONITOR`: - - - ``CEC_MODE_MONITOR`` - - - 0xe0 - - - Put the file descriptor into monitor mode. Can only be used in - combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise EINVAL error - code will be returned. In monitor mode all messages this CEC - device transmits and all messages it receives (both broadcast - messages and directed messages for one its logical addresses) will - be reported. This is very useful for debugging. This is only - allowed if the process has the ``CAP_NET_ADMIN`` capability. If - that is not set, then the ``EPERM`` error code is returned. - - - .. _`CEC-MODE-MONITOR-ALL`: - - - ``CEC_MODE_MONITOR_ALL`` - - - 0xf0 - - - Put the file descriptor into 'monitor all' mode. Can only be used - in combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise - the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages - this CEC device transmits and all messages it receives, including - directed messages for other CEC devices will be reported. This is - very useful for debugging, but not all devices support this. This - mode requires that the :ref:`CEC_CAP_MONITOR_ALL <CEC-CAP-MONITOR-ALL>` capability is set, - otherwise the ``EINVAL`` error code is returned. This is only allowed if - the process has the ``CAP_NET_ADMIN`` capability. If that is not - set, then the ``EPERM`` error code is returned. + * .. _`CEC-MODE-NO-FOLLOWER`: + + - ``CEC_MODE_NO_FOLLOWER`` + - 0x00 + - This is not a follower (the default when the device is opened). + * .. _`CEC-MODE-FOLLOWER`: + + - ``CEC_MODE_FOLLOWER`` + - 0x10 + - This is a follower and it will receive CEC messages unless there + is an exclusive follower. You cannot become a follower if + :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` + was specified, the ``EINVAL`` error code is returned in that case. + * .. _`CEC-MODE-EXCL-FOLLOWER`: + + - ``CEC_MODE_EXCL_FOLLOWER`` + - 0x20 + - This is an exclusive follower and only this file descriptor will + receive CEC messages for processing. If someone else is already + the exclusive follower then an attempt to become one will return + the ``EBUSY`` error code. You cannot become a follower if + :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` + was specified, the ``EINVAL`` error code is returned in that case. + * .. _`CEC-MODE-EXCL-FOLLOWER-PASSTHRU`: + + - ``CEC_MODE_EXCL_FOLLOWER_PASSTHRU`` + - 0x30 + - This is an exclusive follower and only this file descriptor will + receive CEC messages for processing. In addition it will put the + CEC device into passthrough mode, allowing the exclusive follower + to handle most core messages instead of relying on the CEC + framework for that. If someone else is already the exclusive + follower then an attempt to become one will return the ``EBUSY`` error + code. You cannot become a follower if :ref:`CEC_CAP_TRANSMIT <CEC-CAP-TRANSMIT>` + is not set or if :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>` was specified, + the ``EINVAL`` error code is returned in that case. + * .. _`CEC-MODE-MONITOR`: + + - ``CEC_MODE_MONITOR`` + - 0xe0 + - Put the file descriptor into monitor mode. Can only be used in + combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise EINVAL error + code will be returned. In monitor mode all messages this CEC + device transmits and all messages it receives (both broadcast + messages and directed messages for one its logical addresses) will + be reported. This is very useful for debugging. This is only + allowed if the process has the ``CAP_NET_ADMIN`` capability. If + that is not set, then the ``EPERM`` error code is returned. + * .. _`CEC-MODE-MONITOR-ALL`: + + - ``CEC_MODE_MONITOR_ALL`` + - 0xf0 + - Put the file descriptor into 'monitor all' mode. Can only be used + in combination with :ref:`CEC_MODE_NO_INITIATOR <CEC-MODE-NO-INITIATOR>`, otherwise + the ``EINVAL`` error code will be returned. In 'monitor all' mode all messages + this CEC device transmits and all messages it receives, including + directed messages for other CEC devices will be reported. This is + very useful for debugging, but not all devices support this. This + mode requires that the :ref:`CEC_CAP_MONITOR_ALL <CEC-CAP-MONITOR-ALL>` capability is set, + otherwise the ``EINVAL`` error code is returned. This is only allowed if + the process has the ``CAP_NET_ADMIN`` capability. If that is not + set, then the ``EPERM`` error code is returned. Core message processing details: @@ -220,76 +193,58 @@ Core message processing details: :stub-columns: 0 :widths: 1 8 - - - .. _`CEC-MSG-GET-CEC-VERSION`: - - - ``CEC_MSG_GET_CEC_VERSION`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return the CEC version that was - set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. - - - .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`: - - - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return the vendor ID that was - set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. - - - .. _`CEC-MSG-ABORT`: - - - ``CEC_MSG_ABORT`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will return a feature refused - message as per the specification. - - - .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`: - - - ``CEC_MSG_GIVE_PHYSICAL_ADDR`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current physical - address. - - - .. _`CEC-MSG-GIVE-OSD-NAME`: - - - ``CEC_MSG_GIVE_OSD_NAME`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current OSD name as - was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. - - - .. _`CEC-MSG-GIVE-FEATURES`: - - - ``CEC_MSG_GIVE_FEATURES`` - - - When in passthrough mode this message has to be handled by - userspace, otherwise the core will report the current features as - was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` - or the message is ignored if the CEC version was older than 2.0. - - - .. _`CEC-MSG-USER-CONTROL-PRESSED`: - - - ``CEC_MSG_USER_CONTROL_PRESSED`` - - - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key - press. This message is always passed on to userspace. - - - .. _`CEC-MSG-USER-CONTROL-RELEASED`: - - - ``CEC_MSG_USER_CONTROL_RELEASED`` - - - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key - release. This message is always passed on to userspace. - - - .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`: - - - ``CEC_MSG_REPORT_PHYSICAL_ADDR`` - - - The CEC framework will make note of the reported physical address - and then just pass the message on to userspace. + * .. _`CEC-MSG-GET-CEC-VERSION`: + + - ``CEC_MSG_GET_CEC_VERSION`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will return the CEC version that was + set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. + * .. _`CEC-MSG-GIVE-DEVICE-VENDOR-ID`: + + - ``CEC_MSG_GIVE_DEVICE_VENDOR_ID`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will return the vendor ID that was + set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. + * .. _`CEC-MSG-ABORT`: + + - ``CEC_MSG_ABORT`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will return a feature refused + message as per the specification. + * .. _`CEC-MSG-GIVE-PHYSICAL-ADDR`: + + - ``CEC_MSG_GIVE_PHYSICAL_ADDR`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will report the current physical + address. + * .. _`CEC-MSG-GIVE-OSD-NAME`: + + - ``CEC_MSG_GIVE_OSD_NAME`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will report the current OSD name as + was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>`. + * .. _`CEC-MSG-GIVE-FEATURES`: + + - ``CEC_MSG_GIVE_FEATURES`` + - When in passthrough mode this message has to be handled by + userspace, otherwise the core will report the current features as + was set with :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` + or the message is ignored if the CEC version was older than 2.0. + * .. _`CEC-MSG-USER-CONTROL-PRESSED`: + + - ``CEC_MSG_USER_CONTROL_PRESSED`` + - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key + press. This message is always passed on to userspace. + * .. _`CEC-MSG-USER-CONTROL-RELEASED`: + + - ``CEC_MSG_USER_CONTROL_RELEASED`` + - If :ref:`CEC_CAP_RC <CEC-CAP-RC>` is set, then generate a remote control key + release. This message is always passed on to userspace. + * .. _`CEC-MSG-REPORT-PHYSICAL-ADDR`: + + - ``CEC_MSG_REPORT_PHYSICAL_ADDR`` + - The CEC framework will make note of the reported physical address + and then just pass the message on to userspace. diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index d585b1bba6ac..bdf015b1d1dc 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -86,173 +86,126 @@ result. :stub-columns: 0 :widths: 1 1 16 + * - __u64 + - ``tx_ts`` + - Timestamp in ns of when the last byte of the message was transmitted. + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access + the same clock from userspace use :c:func:`clock_gettime`. + * - __u64 + - ``rx_ts`` + - Timestamp in ns of when the last byte of the message was received. + The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access + the same clock from userspace use :c:func:`clock_gettime`. + * - __u32 + - ``len`` + - The length of the message. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in + by the application. The driver will fill this in for + :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be + filled in by the driver with the length of the reply message if ``reply`` was set. + * - __u32 + - ``timeout`` + - The timeout in milliseconds. This is the time the device will wait + for a message to be received before timing out. If it is set to 0, + then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. + If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`, + then it will be replaced by 1000 if the ``reply`` is non-zero or + ignored if ``reply`` is 0. + * - __u32 + - ``sequence`` + - A non-zero sequence number is automatically assigned by the CEC framework + for all transmitted messages. It is used by the CEC framework when it queues + the transmit result (when transmit was called in non-blocking mode). This + allows the application to associate the received message with the original + transmit. + * - __u32 + - ``flags`` + - Flags. See :ref:`cec-msg-flags` for a list of available flags. + * - __u8 + - ``tx_status`` + - The status bits of the transmitted message. See + :ref:`cec-tx-status` for the possible status values. It is 0 if + this messages was received, not transmitted. + * - __u8 + - ``msg[16]`` + - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the + application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. + For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be filled in by the driver with + the payload of the reply message if ``timeout`` was set. + * - __u8 + - ``reply`` + - Wait until this message is replied. If ``reply`` is 0 and the + ``timeout`` is 0, then don't wait for a reply but return after + transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. + The case where ``reply`` is 0 (this is the opcode for the Feature Abort + message) and ``timeout`` is non-zero is specifically allowed to make it + possible to send a message and wait up to ``timeout`` milliseconds for a + Feature Abort reply. In this case ``rx_status`` will either be set + to :ref:`CEC_RX_STATUS_TIMEOUT <CEC-RX-STATUS-TIMEOUT>` or + :ref:`CEC_RX_STATUS_FEATURE_ABORT <CEC-RX-STATUS-FEATURE-ABORT>`. + + If the transmitter message is ``CEC_MSG_INITIATE_ARC`` then the ``reply`` + values ``CEC_MSG_REPORT_ARC_INITIATED`` and ``CEC_MSG_REPORT_ARC_TERMINATED`` + are processed differently: either value will match both possible replies. + The reason is that the ``CEC_MSG_INITIATE_ARC`` message is the only CEC + message that has two possible replies other than Feature Abort. The + ``reply`` field will be updated with the actual reply so that it is + synchronized with the contents of the received message. + * - __u8 + - ``rx_status`` + - The status bits of the received message. See + :ref:`cec-rx-status` for the possible status values. It is 0 if + this message was transmitted, not received, unless this is the + reply to a transmitted message. In that case both ``rx_status`` + and ``tx_status`` are set. + * - __u8 + - ``tx_status`` + - The status bits of the transmitted message. See + :ref:`cec-tx-status` for the possible status values. It is 0 if + this messages was received, not transmitted. + * - __u8 + - ``tx_arb_lost_cnt`` + - A counter of the number of transmit attempts that resulted in the + Arbitration Lost error. This is only set if the hardware supports + this, otherwise it is always 0. This counter is only valid if the + :ref:`CEC_TX_STATUS_ARB_LOST <CEC-TX-STATUS-ARB-LOST>` status bit is set. + * - __u8 + - ``tx_nack_cnt`` + - A counter of the number of transmit attempts that resulted in the + Not Acknowledged error. This is only set if the hardware supports + this, otherwise it is always 0. This counter is only valid if the + :ref:`CEC_TX_STATUS_NACK <CEC-TX-STATUS-NACK>` status bit is set. + * - __u8 + - ``tx_low_drive_cnt`` + - A counter of the number of transmit attempts that resulted in the + Arbitration Lost error. This is only set if the hardware supports + this, otherwise it is always 0. This counter is only valid if the + :ref:`CEC_TX_STATUS_LOW_DRIVE <CEC-TX-STATUS-LOW-DRIVE>` status bit is set. + * - __u8 + - ``tx_error_cnt`` + - A counter of the number of transmit errors other than Arbitration + Lost or Not Acknowledged. This is only set if the hardware + supports this, otherwise it is always 0. This counter is only + valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set. + + +.. _cec-msg-flags: + +.. flat-table:: Flags for struct cec_msg + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 - - .. row 1 - - - __u64 - - - ``tx_ts`` - - - Timestamp in ns of when the last byte of the message was transmitted. - The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access - the same clock from userspace use :c:func:`clock_gettime`. - - - .. row 2 - - - __u64 - - - ``rx_ts`` - - - Timestamp in ns of when the last byte of the message was received. - The timestamp has been taken from the ``CLOCK_MONOTONIC`` clock. To access - the same clock from userspace use :c:func:`clock_gettime`. - - - .. row 3 - - - __u32 - - - ``len`` - - - The length of the message. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in - by the application. The driver will fill this in for - :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be - filled in by the driver with the length of the reply message if ``reply`` was set. - - - .. row 4 - - - __u32 - - - ``timeout`` - - - The timeout in milliseconds. This is the time the device will wait - for a message to be received before timing out. If it is set to 0, - then it will wait indefinitely when it is called by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. - If it is 0 and it is called by :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`, - then it will be replaced by 1000 if the ``reply`` is non-zero or - ignored if ``reply`` is 0. - - - .. row 5 - - - __u32 - - - ``sequence`` - - - A non-zero sequence number is automatically assigned by the CEC framework - for all transmitted messages. It is used by the CEC framework when it queues - the transmit result (when transmit was called in non-blocking mode). This - allows the application to associate the received message with the original - transmit. - - - .. row 6 - - - __u32 - - - ``flags`` - - - Flags. No flags are defined yet, so set this to 0. - - - .. row 7 - - - __u8 - - - ``tx_status`` - - - The status bits of the transmitted message. See - :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. - - - .. row 8 - - - __u8 - - - ``msg[16]`` - - - The message payload. For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` this is filled in by the - application. The driver will fill this in for :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. - For :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` it will be filled in by the driver with - the payload of the reply message if ``timeout`` was set. - - - .. row 8 - - - __u8 - - - ``reply`` - - - Wait until this message is replied. If ``reply`` is 0 and the - ``timeout`` is 0, then don't wait for a reply but return after - transmitting the message. Ignored by :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. - The case where ``reply`` is 0 (this is the opcode for the Feature Abort - message) and ``timeout`` is non-zero is specifically allowed to make it - possible to send a message and wait up to ``timeout`` milliseconds for a - Feature Abort reply. In this case ``rx_status`` will either be set - to :ref:`CEC_RX_STATUS_TIMEOUT <CEC-RX-STATUS-TIMEOUT>` or - :ref:`CEC_RX_STATUS_FEATURE_ABORT <CEC-RX-STATUS-FEATURE-ABORT>`. - - - .. row 9 - - - __u8 - - - ``rx_status`` - - - The status bits of the received message. See - :ref:`cec-rx-status` for the possible status values. It is 0 if - this message was transmitted, not received, unless this is the - reply to a transmitted message. In that case both ``rx_status`` - and ``tx_status`` are set. - - - .. row 10 - - - __u8 - - - ``tx_status`` - - - The status bits of the transmitted message. See - :ref:`cec-tx-status` for the possible status values. It is 0 if - this messages was received, not transmitted. - - - .. row 11 - - - __u8 - - - ``tx_arb_lost_cnt`` - - - A counter of the number of transmit attempts that resulted in the - Arbitration Lost error. This is only set if the hardware supports - this, otherwise it is always 0. This counter is only valid if the - :ref:`CEC_TX_STATUS_ARB_LOST <CEC-TX-STATUS-ARB-LOST>` status bit is set. - - - .. row 12 - - - __u8 - - - ``tx_nack_cnt`` - - - A counter of the number of transmit attempts that resulted in the - Not Acknowledged error. This is only set if the hardware supports - this, otherwise it is always 0. This counter is only valid if the - :ref:`CEC_TX_STATUS_NACK <CEC-TX-STATUS-NACK>` status bit is set. - - - .. row 13 - - - __u8 - - - ``tx_low_drive_cnt`` - - - A counter of the number of transmit attempts that resulted in the - Arbitration Lost error. This is only set if the hardware supports - this, otherwise it is always 0. This counter is only valid if the - :ref:`CEC_TX_STATUS_LOW_DRIVE <CEC-TX-STATUS-LOW-DRIVE>` status bit is set. - - - .. row 14 - - - __u8 - - - ``tx_error_cnt`` + * .. _`CEC-MSG-FL-REPLY-TO-FOLLOWERS`: - - A counter of the number of transmit errors other than Arbitration - Lost or Not Acknowledged. This is only set if the hardware - supports this, otherwise it is always 0. This counter is only - valid if the :ref:`CEC_TX_STATUS_ERROR <CEC-TX-STATUS-ERROR>` status bit is set. + - ``CEC_MSG_FL_REPLY_TO_FOLLOWERS`` + - 1 + - If a CEC transmit expects a reply, then by default that reply is only sent to + the filehandle that called :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`. If this + flag is set, then the reply is also sent to all followers, if any. If the + filehandle that called :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>` is also a + follower, then that filehandle will receive the reply twice: once as the + result of the :ref:`ioctl CEC_TRANSMIT <CEC_TRANSMIT>`, and once via + :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`. .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| @@ -264,64 +217,46 @@ result. :stub-columns: 0 :widths: 3 1 16 - - - .. _`CEC-TX-STATUS-OK`: - - - ``CEC_TX_STATUS_OK`` - - - 0x01 - - - The message was transmitted successfully. This is mutually - exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`. Other bits can still - be set if earlier attempts met with failure before the transmit - was eventually successful. - - - .. _`CEC-TX-STATUS-ARB-LOST`: - - - ``CEC_TX_STATUS_ARB_LOST`` - - - 0x02 - - - CEC line arbitration was lost. - - - .. _`CEC-TX-STATUS-NACK`: - - - ``CEC_TX_STATUS_NACK`` - - - 0x04 - - - Message was not acknowledged. - - - .. _`CEC-TX-STATUS-LOW-DRIVE`: - - - ``CEC_TX_STATUS_LOW_DRIVE`` - - - 0x08 - - - Low drive was detected on the CEC bus. This indicates that a - follower detected an error on the bus and requests a - retransmission. - - - .. _`CEC-TX-STATUS-ERROR`: - - - ``CEC_TX_STATUS_ERROR`` - - - 0x10 - - - Some error occurred. This is used for any errors that do not fit - the previous two, either because the hardware could not tell which - error occurred, or because the hardware tested for other - conditions besides those two. - - - .. _`CEC-TX-STATUS-MAX-RETRIES`: - - - ``CEC_TX_STATUS_MAX_RETRIES`` - - - 0x20 - - - The transmit failed after one or more retries. This status bit is - mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`. Other bits can still - be set to explain which failures were seen. + * .. _`CEC-TX-STATUS-OK`: + + - ``CEC_TX_STATUS_OK`` + - 0x01 + - The message was transmitted successfully. This is mutually + exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`. Other bits can still + be set if earlier attempts met with failure before the transmit + was eventually successful. + * .. _`CEC-TX-STATUS-ARB-LOST`: + + - ``CEC_TX_STATUS_ARB_LOST`` + - 0x02 + - CEC line arbitration was lost. + * .. _`CEC-TX-STATUS-NACK`: + + - ``CEC_TX_STATUS_NACK`` + - 0x04 + - Message was not acknowledged. + * .. _`CEC-TX-STATUS-LOW-DRIVE`: + + - ``CEC_TX_STATUS_LOW_DRIVE`` + - 0x08 + - Low drive was detected on the CEC bus. This indicates that a + follower detected an error on the bus and requests a + retransmission. + * .. _`CEC-TX-STATUS-ERROR`: + + - ``CEC_TX_STATUS_ERROR`` + - 0x10 + - Some error occurred. This is used for any errors that do not fit + the previous two, either because the hardware could not tell which + error occurred, or because the hardware tested for other + conditions besides those two. + * .. _`CEC-TX-STATUS-MAX-RETRIES`: + + - ``CEC_TX_STATUS_MAX_RETRIES`` + - 0x20 + - The transmit failed after one or more retries. This status bit is + mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`. Other bits can still + be set to explain which failures were seen. .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| @@ -333,32 +268,23 @@ result. :stub-columns: 0 :widths: 3 1 16 + * .. _`CEC-RX-STATUS-OK`: - - .. _`CEC-RX-STATUS-OK`: - - - ``CEC_RX_STATUS_OK`` - - - 0x01 - - - The message was received successfully. - - - .. _`CEC-RX-STATUS-TIMEOUT`: - - - ``CEC_RX_STATUS_TIMEOUT`` - - - 0x02 - - - The reply to an earlier transmitted message timed out. - - - .. _`CEC-RX-STATUS-FEATURE-ABORT`: - - - ``CEC_RX_STATUS_FEATURE_ABORT`` + - ``CEC_RX_STATUS_OK`` + - 0x01 + - The message was received successfully. + * .. _`CEC-RX-STATUS-TIMEOUT`: - - 0x04 + - ``CEC_RX_STATUS_TIMEOUT`` + - 0x02 + - The reply to an earlier transmitted message timed out. + * .. _`CEC-RX-STATUS-FEATURE-ABORT`: - - The message was received successfully but the reply was - ``CEC_MSG_FEATURE_ABORT``. This status is only set if this message - was the reply to an earlier transmitted message. + - ``CEC_RX_STATUS_FEATURE_ABORT`` + - 0x04 + - The message was received successfully but the reply was + ``CEC_MSG_FEATURE_ABORT``. This status is only set if this message + was the reply to an earlier transmitted message. diff --git a/Documentation/media/uapi/v4l/control.rst b/Documentation/media/uapi/v4l/control.rst index d3f1450c4b08..51112badb804 100644 --- a/Documentation/media/uapi/v4l/control.rst +++ b/Documentation/media/uapi/v4l/control.rst @@ -312,21 +312,20 @@ more menu type controls. .. _enum_all_controls: -Example: Enumerating all user controls -====================================== +Example: Enumerating all controls +================================= .. code-block:: c - struct v4l2_queryctrl queryctrl; struct v4l2_querymenu querymenu; - static void enumerate_menu(void) + static void enumerate_menu(__u32 id) { printf(" Menu items:\\n"); memset(&querymenu, 0, sizeof(querymenu)); - querymenu.id = queryctrl.id; + querymenu.id = id; for (querymenu.index = queryctrl.minimum; querymenu.index <= queryctrl.maximum; @@ -339,6 +338,55 @@ Example: Enumerating all user controls memset(&queryctrl, 0, sizeof(queryctrl)); + queryctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL; + while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) { + if (!(queryctrl.flags & V4L2_CTRL_FLAG_DISABLED)) { + printf("Control %s\\n", queryctrl.name); + + if (queryctrl.type == V4L2_CTRL_TYPE_MENU) + enumerate_menu(queryctrl.id); + } + + queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; + } + if (errno != EINVAL) { + perror("VIDIOC_QUERYCTRL"); + exit(EXIT_FAILURE); + } + +Example: Enumerating all controls including compound controls +============================================================= + +.. code-block:: c + + struct v4l2_query_ext_ctrl query_ext_ctrl; + + memset(&query_ext_ctrl, 0, sizeof(query_ext_ctrl)); + + query_ext_ctrl.id = V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND; + while (0 == ioctl(fd, VIDIOC_QUERY_EXT_CTRL, &query_ext_ctrl)) { + if (!(query_ext_ctrl.flags & V4L2_CTRL_FLAG_DISABLED)) { + printf("Control %s\\n", query_ext_ctrl.name); + + if (query_ext_ctrl.type == V4L2_CTRL_TYPE_MENU) + enumerate_menu(query_ext_ctrl.id); + } + + query_ext_ctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND; + } + if (errno != EINVAL) { + perror("VIDIOC_QUERY_EXT_CTRL"); + exit(EXIT_FAILURE); + } + +Example: Enumerating all user controls (old style) +================================================== + +.. code-block:: c + + + memset(&queryctrl, 0, sizeof(queryctrl)); + for (queryctrl.id = V4L2_CID_BASE; queryctrl.id < V4L2_CID_LASTP1; queryctrl.id++) { @@ -349,7 +397,7 @@ Example: Enumerating all user controls printf("Control %s\\n", queryctrl.name); if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu(); + enumerate_menu(queryctrl.id); } else { if (errno == EINVAL) continue; @@ -368,7 +416,7 @@ Example: Enumerating all user controls printf("Control %s\\n", queryctrl.name); if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu(); + enumerate_menu(queryctrl.id); } else { if (errno == EINVAL) break; @@ -379,32 +427,6 @@ Example: Enumerating all user controls } -Example: Enumerating all user controls (alternative) -==================================================== - -.. code-block:: c - - memset(&queryctrl, 0, sizeof(queryctrl)); - - queryctrl.id = V4L2_CTRL_CLASS_USER | V4L2_CTRL_FLAG_NEXT_CTRL; - while (0 == ioctl(fd, VIDIOC_QUERYCTRL, &queryctrl)) { - if (V4L2_CTRL_ID2CLASS(queryctrl.id) != V4L2_CTRL_CLASS_USER) - break; - if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) - continue; - - printf("Control %s\\n", queryctrl.name); - - if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu(); - - queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; - } - if (errno != EINVAL) { - perror("VIDIOC_QUERYCTRL"); - exit(EXIT_FAILURE); - } - Example: Changing controls ========================== diff --git a/Documentation/media/uapi/v4l/dev-codec.rst b/Documentation/media/uapi/v4l/dev-codec.rst index d9f218449ddd..c61e938bd8dc 100644 --- a/Documentation/media/uapi/v4l/dev-codec.rst +++ b/Documentation/media/uapi/v4l/dev-codec.rst @@ -26,7 +26,7 @@ parameters The MPEG controls actually support many more codecs than just MPEG. See :ref:`mpeg-controls`. -Memory-to-memory devices can often be used as a shared resource: you can +Memory-to-memory devices function as a shared resource: you can open the video node multiple times, each application setting up their own codec properties that are local to the file handle, and each can use it independently from the others. The driver will arbitrate access to diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 7725c33d8b69..40071ea5d90e 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -3017,6 +3017,10 @@ Image Process Control IDs test pattern images. These hardware specific test patterns can be used to test if a device is working properly. +``V4L2_CID_DEINTERLACING_MODE (menu)`` + The video deinterlacing mode (such as Bob, Weave, ...). The menu items are + driver specific and are documented in :ref:`v4l-drivers`. + .. _dv-controls: diff --git a/Documentation/media/uapi/v4l/hsv-formats.rst b/Documentation/media/uapi/v4l/hsv-formats.rst new file mode 100644 index 000000000000..f0f2615eaa95 --- /dev/null +++ b/Documentation/media/uapi/v4l/hsv-formats.rst @@ -0,0 +1,19 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _hsv-formats: + +*********** +HSV Formats +*********** + +These formats store the color information of the image +in a geometrical representation. The colors are mapped into a +cylinder, where the angle is the HUE, the height is the VALUE +and the distance to the center is the SATURATION. This is a very +useful format for image segmentation algorithms. + + +.. toctree:: + :maxdepth: 1 + + pixfmt-packed-hsv diff --git a/Documentation/media/uapi/v4l/pixfmt-002.rst b/Documentation/media/uapi/v4l/pixfmt-002.rst index 0d9e697f5d4e..2ee164c25637 100644 --- a/Documentation/media/uapi/v4l/pixfmt-002.rst +++ b/Documentation/media/uapi/v4l/pixfmt-002.rst @@ -121,6 +121,11 @@ Single-planar format structure - This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output streams, see :ref:`colorspaces`. + * - enum :c:type:`v4l2_hsv_encoding` + - ``hsv_enc`` + - This information supplements the ``colorspace`` and must be set by + the driver for capture streams and by the application for output + streams, see :ref:`colorspaces`. * - enum :c:type:`v4l2_quantization` - ``quantization`` - This information supplements the ``colorspace`` and must be set by diff --git a/Documentation/media/uapi/v4l/pixfmt-003.rst b/Documentation/media/uapi/v4l/pixfmt-003.rst index ae9ea7a791de..337e8188caf1 100644 --- a/Documentation/media/uapi/v4l/pixfmt-003.rst +++ b/Documentation/media/uapi/v4l/pixfmt-003.rst @@ -78,6 +78,11 @@ describing all planes of that format. - This information supplements the ``colorspace`` and must be set by the driver for capture streams and by the application for output streams, see :ref:`colorspaces`. + * - enum :c:type:`v4l2_hsv_encoding` + - ``hsv_enc`` + - This information supplements the ``colorspace`` and must be set by + the driver for capture streams and by the application for output + streams, see :ref:`colorspaces`. * - enum :c:type:`v4l2_quantization` - ``quantization`` - This information supplements the ``colorspace`` and must be set by diff --git a/Documentation/media/uapi/v4l/pixfmt-006.rst b/Documentation/media/uapi/v4l/pixfmt-006.rst index a9890ff6038b..7ae7dcf73f63 100644 --- a/Documentation/media/uapi/v4l/pixfmt-006.rst +++ b/Documentation/media/uapi/v4l/pixfmt-006.rst @@ -19,9 +19,16 @@ colorspace field of struct :c:type:`v4l2_pix_format` or struct :c:type:`v4l2_pix_format_mplane` needs to be filled in. -.. note:: +.. _hsv-colorspace: - The default R'G'B' quantization is full range for all +On :ref:`HSV formats <hsv-formats>` the *Hue* is defined as the angle on +the cylindrical color representation. Usually this angle is measured in +degrees, i.e. 0-360. When we map this angle value into 8 bits, there are +two basic ways to do it: Divide the angular value by 2 (0-179), or use the +whole range, 0-255, dividing the angular value by 1.41. The enum +:c:type:`v4l2_hsv_encoding` specifies which encoding is used. + +.. note:: The default R'G'B' quantization is full range for all colorspaces except for BT.2020 which uses limited range R'G'B' quantization. @@ -123,6 +130,24 @@ needs to be filled in. +.. c:type:: v4l2_hsv_encoding + +.. tabularcolumns:: |p{6.5cm}|p{11.0cm}| + +.. flat-table:: V4L2 HSV Encodings + :header-rows: 1 + :stub-columns: 0 + + * - Identifier + - Details + * - ``V4L2_HSV_ENC_180`` + - For the Hue, each LSB is two degrees. + * - ``V4L2_HSV_ENC_256`` + - For the Hue, the 360 degrees are mapped into 8 bits, i.e. each + LSB is roughly 1.41 degrees. + + + .. c:type:: v4l2_quantization .. tabularcolumns:: |p{6.5cm}|p{11.0cm}| @@ -136,7 +161,7 @@ needs to be filled in. * - ``V4L2_QUANTIZATION_DEFAULT`` - Use the default quantization encoding as defined by the colorspace. This is always full range for R'G'B' (except for the - BT.2020 colorspace) and usually limited range for Y'CbCr. + BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr. * - ``V4L2_QUANTIZATION_FULL_RANGE`` - Use the full range quantization encoding. I.e. the range [0…1] is mapped to [0…255] (with possible clipping to [1…254] to avoid the diff --git a/Documentation/media/uapi/v4l/pixfmt-013.rst b/Documentation/media/uapi/v4l/pixfmt-013.rst index 542c087152e3..728d7ede10fa 100644 --- a/Documentation/media/uapi/v4l/pixfmt-013.rst +++ b/Documentation/media/uapi/v4l/pixfmt-013.rst @@ -85,3 +85,8 @@ Compressed Formats - ``V4L2_PIX_FMT_VP8`` - 'VP80' - VP8 video elementary stream. + * .. _V4L2-PIX-FMT-VP9: + + - ``V4L2_PIX_FMT_VP9`` + - 'VP90' + - VP9 video elementary stream. diff --git a/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst new file mode 100644 index 000000000000..3fdb34ce2f09 --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-packed-hsv.rst @@ -0,0 +1,157 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _packed-hsv: + +****************** +Packed HSV formats +****************** + +Description +=========== + +The *hue* (h) is measured in degrees, the equivalence between degrees and LSBs +depends on the hsv-encoding used, see :ref:`colorspaces`. +The *saturation* (s) and the *value* (v) are measured in percentage of the +cylinder: 0 being the smallest value and 255 the maximum. + + +The values are packed in 24 or 32 bit formats. + +.. raw:: latex + + \newline\begin{adjustbox}{width=\columnwidth} + +.. tabularcolumns:: |p{4.2cm}|p{1.0cm}|p{0.7cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.2cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{0.4cm}|p{1.7cm}| + +.. _packed-hsv-formats: + +.. flat-table:: Packed HSV Image Formats + :header-rows: 2 + :stub-columns: 0 + + * - Identifier + - Code + - + - :cspan:`7` Byte 0 in memory + - + - :cspan:`7` Byte 1 + - + - :cspan:`7` Byte 2 + - + - :cspan:`7` Byte 3 + * - + - + - Bit + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + - + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + - + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + - + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + * .. _V4L2-PIX-FMT-HSV32: + + - ``V4L2_PIX_FMT_HSV32`` + - 'HSV4' + - + - + - + - + - + - + - + - + - + - + - h\ :sub:`7` + - h\ :sub:`6` + - h\ :sub:`5` + - h\ :sub:`4` + - h\ :sub:`3` + - h\ :sub:`2` + - h\ :sub:`1` + - h\ :sub:`0` + - + - s\ :sub:`7` + - s\ :sub:`6` + - s\ :sub:`5` + - s\ :sub:`4` + - s\ :sub:`3` + - s\ :sub:`2` + - s\ :sub:`1` + - s\ :sub:`0` + - + - v\ :sub:`7` + - v\ :sub:`6` + - v\ :sub:`5` + - v\ :sub:`4` + - v\ :sub:`3` + - v\ :sub:`2` + - v\ :sub:`1` + - v\ :sub:`0` + * .. _V4L2-PIX-FMT-HSV24: + + - ``V4L2_PIX_FMT_HSV24`` + - 'HSV3' + - + - h\ :sub:`7` + - h\ :sub:`6` + - h\ :sub:`5` + - h\ :sub:`4` + - h\ :sub:`3` + - h\ :sub:`2` + - h\ :sub:`1` + - h\ :sub:`0` + - + - s\ :sub:`7` + - s\ :sub:`6` + - s\ :sub:`5` + - s\ :sub:`4` + - s\ :sub:`3` + - s\ :sub:`2` + - s\ :sub:`1` + - s\ :sub:`0` + - + - v\ :sub:`7` + - v\ :sub:`6` + - v\ :sub:`5` + - v\ :sub:`4` + - v\ :sub:`3` + - v\ :sub:`2` + - v\ :sub:`1` + - v\ :sub:`0` + - + - +.. raw:: latex + + \end{adjustbox}\newline\newline + +Bit 7 is the most significant bit. diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst index bd7bf3dae6af..521adb795535 100644 --- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst +++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst @@ -234,7 +234,15 @@ please make a proposal on the linux-media mailing list. repeated for each line, i.e. the number of entries in the pointer array. Anything what's in between the UYVY lines is JPEG data and should be concatenated to form the JPEG stream. - + * .. _V4L2-PIX-FMT-MT21C: + + - ``V4L2_PIX_FMT_MT21C`` + - 'MT21' + - Compressed two-planar YVU420 format used by Mediatek MT8173. + The compression is lossless. + It is an opaque intermediate format and the MDP hardware must be + used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``, + ``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| diff --git a/Documentation/media/uapi/v4l/pixfmt.rst b/Documentation/media/uapi/v4l/pixfmt.rst index 4d297f6eb5f1..4f184c7aedab 100644 --- a/Documentation/media/uapi/v4l/pixfmt.rst +++ b/Documentation/media/uapi/v4l/pixfmt.rst @@ -29,6 +29,7 @@ see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.) pixfmt-indexed pixfmt-rgb yuv-formats + hsv-formats depth-formats pixfmt-013 sdr-formats diff --git a/Documentation/media/uapi/v4l/v4l2.rst b/Documentation/media/uapi/v4l/v4l2.rst index 55b959dda07e..f52a11c949d3 100644 --- a/Documentation/media/uapi/v4l/v4l2.rst +++ b/Documentation/media/uapi/v4l/v4l2.rst @@ -68,6 +68,10 @@ Authors, in alphabetical order: - SDR API. +- Ribalda, Ricardo + + - Introduce HSV formats and other minor changes. + - Rubli, Martin - Designed and documented the VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS ioctls. @@ -89,6 +93,11 @@ part can be used and distributed without restrictions. Revision History **************** +:revision: 4.10 / 2016-07-15 (*rr*) + +Introduce HSV formats. + + :revision: 4.5 / 2015-10-29 (*rr*) Extend VIDIOC_G_EXT_CTRLS;. Replace ctrl_class with a new union with diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index 7dd943ff14cd..aea276502f5e 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -270,3 +270,14 @@ EBUSY - Some formats like SMPTE-125M have an interlaced signal with a odd total height. For these formats, if this flag is set, the first field has the extra line. Else, it is the second field. + * - ``V4L2_DV_FL_HAS_PICTURE_ASPECT`` + - If set, then the picture_aspect field is valid. Otherwise assume that + the pixels are square, so the picture aspect ratio is the same as the + width to height ratio. + * - ``V4L2_DV_FL_HAS_CEA861_VIC`` + - If set, then the cea861_vic field is valid and contains the Video + Identification Code as per the CEA-861 standard. + * - ``V4L2_DV_FL_HAS_HDMI_VIC`` + - If set, then the hdmi_vic field is valid and contains the Video + Identification Code as per the HDMI standard (HDMI Vendor Specific + InfoFrame). diff --git a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst index e8aa8cd7065f..57c79fa43866 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-tuner.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-tuner.rst @@ -201,10 +201,10 @@ To change the radio frequency the * - ``V4L2_TUNER_SDR`` - 4 - Tuner controls the A/D and/or D/A block of a - Sofware Digital Radio (SDR) + Software Digital Radio (SDR) * - ``V4L2_TUNER_RF`` - 5 - - Tuner controls the RF part of a Sofware Digital Radio (SDR) + - Tuner controls the RF part of a Software Digital Radio (SDR) .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| diff --git a/Documentation/media/v4l-drivers/au0828-cardlist.rst b/Documentation/media/v4l-drivers/au0828-cardlist.rst index aed51b4ffb46..82d2567bc7c1 100644 --- a/Documentation/media/v4l-drivers/au0828-cardlist.rst +++ b/Documentation/media/v4l-drivers/au0828-cardlist.rst @@ -1,11 +1,13 @@ AU0828 cards list ================= -.. code-block:: none - - 0 -> Unknown board (au0828) - 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008,2040:7260,2040:7213,2040:7270] - 2 -> Hauppauge HVR850 (au0828) [2040:7240] - 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] - 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] - 5 -> Hauppauge Woodbury (au0828) [05e1:0480,2040:8200] +=========== ========================== ======================================================================================================================= +Card number Card name USB IDs +=========== ========================== ======================================================================================================================= +0 Unknown board +1 Hauppauge HVR950Q 2040:7200, 2040:7210, 2040:7217, 2040:721b, 2040:721e, 2040:721f, 2040:7280, 0fd9:0008, 2040:7260, 2040:7213, 2040:7270 +2 Hauppauge HVR850 2040:7240 +3 DViCO FusionHDTV USB 0fe9:d620 +4 Hauppauge HVR950Q rev xxF8 2040:7201, 2040:7211, 2040:7281 +5 Hauppauge Woodbury 05e1:0480, 2040:8200 +=========== ========================== ======================================================================================================================= diff --git a/Documentation/media/v4l-drivers/bttv-cardlist.rst b/Documentation/media/v4l-drivers/bttv-cardlist.rst index 97a966e7f9c4..28a01cd6cf2e 100644 --- a/Documentation/media/v4l-drivers/bttv-cardlist.rst +++ b/Documentation/media/v4l-drivers/bttv-cardlist.rst @@ -1,172 +1,174 @@ BTTV cards list =============== -.. code-block:: none - - 0 -> *** UNKNOWN/GENERIC *** - 1 -> MIRO PCTV - 2 -> Hauppauge (bt848) - 3 -> STB, Gateway P/N 6000699 (bt848) - 4 -> Intel Create and Share PCI/ Smart Video Recorder III - 5 -> Diamond DTV2000 - 6 -> AVerMedia TVPhone - 7 -> MATRIX-Vision MV-Delta - 8 -> Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 - 9 -> IMS/IXmicro TurboTV - 10 -> Hauppauge (bt878) [0070:13eb,0070:3900,2636:10b4] - 11 -> MIRO PCTV pro - 12 -> ADS Technologies Channel Surfer TV (bt848) - 13 -> AVerMedia TVCapture 98 [1461:0002,1461:0004,1461:0300] - 14 -> Aimslab Video Highway Xtreme (VHX) - 15 -> Zoltrix TV-Max [a1a0:a0fc] - 16 -> Prolink Pixelview PlayTV (bt878) - 17 -> Leadtek WinView 601 - 18 -> AVEC Intercapture - 19 -> Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only) - 20 -> CEI Raffles Card - 21 -> Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 - 22 -> Askey CPH050/ Phoebe Tv Master + FM [14ff:3002] - 23 -> Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 [14c7:0101] - 24 -> Askey CPH05X/06X (bt878) [many vendors] [144f:3002,144f:3005,144f:5000,14ff:3000] - 25 -> Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar - 26 -> Hauppauge WinCam newer (bt878) - 27 -> Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 - 28 -> Terratec TerraTV+ Version 1.1 (bt878) [153b:1127,1852:1852] - 29 -> Imagenation PXC200 [1295:200a] - 30 -> Lifeview FlyVideo 98 LR50 [1f7f:1850] - 31 -> Formac iProTV, Formac ProTV I (bt848) - 32 -> Intel Create and Share PCI/ Smart Video Recorder III - 33 -> Terratec TerraTValue Version Bt878 [153b:1117,153b:1118,153b:1119,153b:111a,153b:1134,153b:5018] - 34 -> Leadtek WinFast 2000/ WinFast 2000 XP [107d:6606,107d:6609,6606:217d,f6ff:fff6] - 35 -> Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II [1851:1850,1851:a050] - 36 -> Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner [1852:1852] - 37 -> Prolink PixelView PlayTV pro - 38 -> Askey CPH06X TView99 [144f:3000,144f:a005,a04f:a0fc] - 39 -> Pinnacle PCTV Studio/Rave [11bd:0012,bd11:1200,bd11:ff00,11bd:ff12] - 40 -> STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 [10b4:2636,10b4:2645,121a:3060] - 41 -> AVerMedia TVPhone 98 [1461:0001,1461:0003] - 42 -> ProVideo PV951 [aa0c:146c] - 43 -> Little OnAir TV - 44 -> Sigma TVII-FM - 45 -> MATRIX-Vision MV-Delta 2 - 46 -> Zoltrix Genie TV/FM [15b0:4000,15b0:400a,15b0:400d,15b0:4010,15b0:4016] - 47 -> Terratec TV/Radio+ [153b:1123] - 48 -> Askey CPH03x/ Dynalink Magic TView - 49 -> IODATA GV-BCTV3/PCI [10fc:4020] - 50 -> Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP - 51 -> Eagle Wireless Capricorn2 (bt878A) - 52 -> Pinnacle PCTV Studio Pro - 53 -> Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS - 54 -> Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] - 55 -> Askey CPH031/ BESTBUY Easy TV - 56 -> Lifeview FlyVideo 98FM LR50 [a051:41a0] - 57 -> GrandTec 'Grand Video Capture' (Bt848) [4344:4142] - 58 -> Askey CPH060/ Phoebe TV Master Only (No FM) - 59 -> Askey CPH03x TV Capturer - 60 -> Modular Technology MM100PCTV - 61 -> AG Electronics GMV1 [15cb:0101] - 62 -> Askey CPH061/ BESTBUY Easy TV (bt878) - 63 -> ATI TV-Wonder [1002:0001] - 64 -> ATI TV-Wonder VE [1002:0003] - 65 -> Lifeview FlyVideo 2000S LR90 - 66 -> Terratec TValueRadio [153b:1135,153b:ff3b] - 67 -> IODATA GV-BCTV4/PCI [10fc:4050] - 68 -> 3Dfx VoodooTV FM (Euro) [10b4:2637] - 69 -> Active Imaging AIMMS - 70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E) - 71 -> Lifeview FlyVideo 98EZ (capture only) LR51 [1851:1851] - 72 -> Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [1554:4011] - 73 -> Sensoray 311/611 [6000:0311,6000:0611] - 74 -> RemoteVision MX (RV605) - 75 -> Powercolor MTV878/ MTV878R/ MTV878F - 76 -> Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) [0e11:0079] - 77 -> GrandTec Multi Capture Card (Bt878) - 78 -> Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF [0a01:17de] - 79 -> DSP Design TCVIDEO - 80 -> Hauppauge WinTV PVR [0070:4500] - 81 -> IODATA GV-BCTV5/PCI [10fc:4070,10fc:d018] - 82 -> Osprey 100/150 (878) [0070:ff00] - 83 -> Osprey 100/150 (848) - 84 -> Osprey 101 (848) - 85 -> Osprey 101/151 - 86 -> Osprey 101/151 w/ svid - 87 -> Osprey 200/201/250/251 - 88 -> Osprey 200/250 [0070:ff01] - 89 -> Osprey 210/220/230 - 90 -> Osprey 500 [0070:ff02] - 91 -> Osprey 540 [0070:ff04] - 92 -> Osprey 2000 [0070:ff03] - 93 -> IDS Eagle - 94 -> Pinnacle PCTV Sat [11bd:001c] - 95 -> Formac ProTV II (bt878) - 96 -> MachTV - 97 -> Euresys Picolo - 98 -> ProVideo PV150 [aa00:1460,aa01:1461,aa02:1462,aa03:1463,aa04:1464,aa05:1465,aa06:1466,aa07:1467] - 99 -> AD-TVK503 - 100 -> Hercules Smart TV Stereo - 101 -> Pace TV & Radio Card - 102 -> IVC-200 [0000:a155,0001:a155,0002:a155,0003:a155,0100:a155,0101:a155,0102:a155,0103:a155,0800:a155,0801:a155,0802:a155,0803:a155] - 103 -> Grand X-Guard / Trust 814PCI [0304:0102] - 104 -> Nebula Electronics DigiTV [0071:0101] - 105 -> ProVideo PV143 [aa00:1430,aa00:1431,aa00:1432,aa00:1433,aa03:1433] - 106 -> PHYTEC VD-009-X1 VD-011 MiniDIN (bt878) - 107 -> PHYTEC VD-009-X1 VD-011 Combi (bt878) - 108 -> PHYTEC VD-009 MiniDIN (bt878) - 109 -> PHYTEC VD-009 Combi (bt878) - 110 -> IVC-100 [ff00:a132] - 111 -> IVC-120G [ff00:a182,ff01:a182,ff02:a182,ff03:a182,ff04:a182,ff05:a182,ff06:a182,ff07:a182,ff08:a182,ff09:a182,ff0a:a182,ff0b:a182,ff0c:a182,ff0d:a182,ff0e:a182,ff0f:a182] - 112 -> pcHDTV HD-2000 TV [7063:2000] - 113 -> Twinhan DST + clones [11bd:0026,1822:0001,270f:fc00,1822:0026] - 114 -> Winfast VC100 [107d:6607] - 115 -> Teppro TEV-560/InterVision IV-560 - 116 -> SIMUS GVC1100 [aa6a:82b2] - 117 -> NGS NGSTV+ - 118 -> LMLBT4 - 119 -> Tekram M205 PRO - 120 -> Conceptronic CONTVFMi - 121 -> Euresys Picolo Tetra [1805:0105,1805:0106,1805:0107,1805:0108] - 122 -> Spirit TV Tuner - 123 -> AVerMedia AVerTV DVB-T 771 [1461:0771] - 124 -> AverMedia AverTV DVB-T 761 [1461:0761] - 125 -> MATRIX Vision Sigma-SQ - 126 -> MATRIX Vision Sigma-SLC - 127 -> APAC Viewcomp 878(AMAX) - 128 -> DViCO FusionHDTV DVB-T Lite [18ac:db10,18ac:db11] - 129 -> V-Gear MyVCD - 130 -> Super TV Tuner - 131 -> Tibet Systems 'Progress DVR' CS16 - 132 -> Kodicom 4400R (master) - 133 -> Kodicom 4400R (slave) - 134 -> Adlink RTV24 - 135 -> DViCO FusionHDTV 5 Lite [18ac:d500] - 136 -> Acorp Y878F [9511:1540] - 137 -> Conceptronic CTVFMi v2 [036e:109e] - 138 -> Prolink Pixelview PV-BT878P+ (Rev.2E) - 139 -> Prolink PixelView PlayTV MPEG2 PV-M4900 - 140 -> Osprey 440 [0070:ff07] - 141 -> Asound Skyeye PCTV - 142 -> Sabrent TV-FM (bttv version) - 143 -> Hauppauge ImpactVCB (bt878) [0070:13eb] - 144 -> MagicTV - 145 -> SSAI Security Video Interface [4149:5353] - 146 -> SSAI Ultrasound Video Interface [414a:5353] - 147 -> VoodooTV 200 (USA) [121a:3000] - 148 -> DViCO FusionHDTV 2 [dbc0:d200] - 149 -> Typhoon TV-Tuner PCI (50684) - 150 -> Geovision GV-600 [008a:763c] - 151 -> Kozumi KTV-01C - 152 -> Encore ENL TV-FM-2 [1000:1801] - 153 -> PHYTEC VD-012 (bt878) - 154 -> PHYTEC VD-012-X1 (bt878) - 155 -> PHYTEC VD-012-X2 (bt878) - 156 -> IVCE-8784 [0000:f050,0001:f050,0002:f050,0003:f050] - 157 -> Geovision GV-800(S) (master) [800a:763d] - 158 -> Geovision GV-800(S) (slave) [800b:763d,800c:763d,800d:763d] - 159 -> ProVideo PV183 [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540] - 160 -> Tongwei Video Technology TD-3116 [f200:3116] - 161 -> Aposonic W-DVR [0279:0228] - 162 -> Adlink MPG24 - 163 -> Bt848 Capture 14MHz - 164 -> CyberVision CV06 (SV) - 165 -> Kworld V-Stream Xpert TV PVR878 - 166 -> PCI-8604PW +=========== ================================================================================= ============================================================================================================================================================================== +Card number Card name PCI IDs +=========== ================================================================================= ============================================================================================================================================================================== +0 *** UNKNOWN/GENERIC *** +1 MIRO PCTV +2 Hauppauge (bt848) +3 STB, Gateway P/N 6000699 (bt848) +4 Intel Create and Share PCI/ Smart Video Recorder III +5 Diamond DTV2000 +6 AVerMedia TVPhone +7 MATRIX-Vision MV-Delta +8 Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 +9 IMS/IXmicro TurboTV +10 Hauppauge (bt878) 0070:13eb, 0070:3900, 2636:10b4 +11 MIRO PCTV pro +12 ADS Technologies Channel Surfer TV (bt848) +13 AVerMedia TVCapture 98 1461:0002, 1461:0004, 1461:0300 +14 Aimslab Video Highway Xtreme (VHX) +15 Zoltrix TV-Max a1a0:a0fc +16 Prolink Pixelview PlayTV (bt878) +17 Leadtek WinView 601 +18 AVEC Intercapture +19 Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only) +20 CEI Raffles Card +21 Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 +22 Askey CPH050/ Phoebe Tv Master + FM 14ff:3002 +23 Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878 14c7:0101 +24 Askey CPH05X/06X (bt878) [many vendors] 144f:3002, 144f:3005, 144f:5000, 14ff:3000 +25 Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar +26 Hauppauge WinCam newer (bt878) +27 Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 +28 Terratec TerraTV+ Version 1.1 (bt878) 153b:1127, 1852:1852 +29 Imagenation PXC200 1295:200a +30 Lifeview FlyVideo 98 LR50 1f7f:1850 +31 Formac iProTV, Formac ProTV I (bt848) +32 Intel Create and Share PCI/ Smart Video Recorder III +33 Terratec TerraTValue Version Bt878 153b:1117, 153b:1118, 153b:1119, 153b:111a, 153b:1134, 153b:5018 +34 Leadtek WinFast 2000/ WinFast 2000 XP 107d:6606, 107d:6609, 6606:217d, f6ff:fff6 +35 Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II 1851:1850, 1851:a050 +36 Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner 1852:1852 +37 Prolink PixelView PlayTV pro +38 Askey CPH06X TView99 144f:3000, 144f:a005, a04f:a0fc +39 Pinnacle PCTV Studio/Rave 11bd:0012, bd11:1200, bd11:ff00, 11bd:ff12 +40 STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100 10b4:2636, 10b4:2645, 121a:3060 +41 AVerMedia TVPhone 98 1461:0001, 1461:0003 +42 ProVideo PV951 aa0c:146c +43 Little OnAir TV +44 Sigma TVII-FM +45 MATRIX-Vision MV-Delta 2 +46 Zoltrix Genie TV/FM 15b0:4000, 15b0:400a, 15b0:400d, 15b0:4010, 15b0:4016 +47 Terratec TV/Radio+ 153b:1123 +48 Askey CPH03x/ Dynalink Magic TView +49 IODATA GV-BCTV3/PCI 10fc:4020 +50 Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP +51 Eagle Wireless Capricorn2 (bt878A) +52 Pinnacle PCTV Studio Pro +53 Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS +54 Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] +55 Askey CPH031/ BESTBUY Easy TV +56 Lifeview FlyVideo 98FM LR50 a051:41a0 +57 GrandTec 'Grand Video Capture' (Bt848) 4344:4142 +58 Askey CPH060/ Phoebe TV Master Only (No FM) +59 Askey CPH03x TV Capturer +60 Modular Technology MM100PCTV +61 AG Electronics GMV1 15cb:0101 +62 Askey CPH061/ BESTBUY Easy TV (bt878) +63 ATI TV-Wonder 1002:0001 +64 ATI TV-Wonder VE 1002:0003 +65 Lifeview FlyVideo 2000S LR90 +66 Terratec TValueRadio 153b:1135, 153b:ff3b +67 IODATA GV-BCTV4/PCI 10fc:4050 +68 3Dfx VoodooTV FM (Euro) 10b4:2637 +69 Active Imaging AIMMS +70 Prolink Pixelview PV-BT878P+ (Rev.4C,8E) +71 Lifeview FlyVideo 98EZ (capture only) LR51 1851:1851 +72 Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) 1554:4011 +73 Sensoray 311/611 6000:0311, 6000:0611 +74 RemoteVision MX (RV605) +75 Powercolor MTV878/ MTV878R/ MTV878F +76 Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) 0e11:0079 +77 GrandTec Multi Capture Card (Bt878) +78 Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF 0a01:17de +79 DSP Design TCVIDEO +80 Hauppauge WinTV PVR 0070:4500 +81 IODATA GV-BCTV5/PCI 10fc:4070, 10fc:d018 +82 Osprey 100/150 (878) 0070:ff00 +83 Osprey 100/150 (848) +84 Osprey 101 (848) +85 Osprey 101/151 +86 Osprey 101/151 w/ svid +87 Osprey 200/201/250/251 +88 Osprey 200/250 0070:ff01 +89 Osprey 210/220/230 +90 Osprey 500 0070:ff02 +91 Osprey 540 0070:ff04 +92 Osprey 2000 0070:ff03 +93 IDS Eagle +94 Pinnacle PCTV Sat 11bd:001c +95 Formac ProTV II (bt878) +96 MachTV +97 Euresys Picolo +98 ProVideo PV150 aa00:1460, aa01:1461, aa02:1462, aa03:1463, aa04:1464, aa05:1465, aa06:1466, aa07:1467 +99 AD-TVK503 +100 Hercules Smart TV Stereo +101 Pace TV & Radio Card +102 IVC-200 0000:a155, 0001:a155, 0002:a155, 0003:a155, 0100:a155, 0101:a155, 0102:a155, 0103:a155, 0800:a155, 0801:a155, 0802:a155, 0803:a155 +103 Grand X-Guard / Trust 814PCI 0304:0102 +104 Nebula Electronics DigiTV 0071:0101 +105 ProVideo PV143 aa00:1430, aa00:1431, aa00:1432, aa00:1433, aa03:1433 +106 PHYTEC VD-009-X1 VD-011 MiniDIN (bt878) +107 PHYTEC VD-009-X1 VD-011 Combi (bt878) +108 PHYTEC VD-009 MiniDIN (bt878) +109 PHYTEC VD-009 Combi (bt878) +110 IVC-100 ff00:a132 +111 IVC-120G ff00:a182, ff01:a182, ff02:a182, ff03:a182, ff04:a182, ff05:a182, ff06:a182, ff07:a182, ff08:a182, ff09:a182, ff0a:a182, ff0b:a182, ff0c:a182, ff0d:a182, ff0e:a182, ff0f:a182 +112 pcHDTV HD-2000 TV 7063:2000 +113 Twinhan DST + clones 11bd:0026, 1822:0001, 270f:fc00, 1822:0026 +114 Winfast VC100 107d:6607 +115 Teppro TEV-560/InterVision IV-560 +116 SIMUS GVC1100 aa6a:82b2 +117 NGS NGSTV+ +118 LMLBT4 +119 Tekram M205 PRO +120 Conceptronic CONTVFMi +121 Euresys Picolo Tetra 1805:0105, 1805:0106, 1805:0107, 1805:0108 +122 Spirit TV Tuner +123 AVerMedia AVerTV DVB-T 771 1461:0771 +124 AverMedia AverTV DVB-T 761 1461:0761 +125 MATRIX Vision Sigma-SQ +126 MATRIX Vision Sigma-SLC +127 APAC Viewcomp 878(AMAX) +128 DViCO FusionHDTV DVB-T Lite 18ac:db10, 18ac:db11 +129 V-Gear MyVCD +130 Super TV Tuner +131 Tibet Systems 'Progress DVR' CS16 +132 Kodicom 4400R (master) +133 Kodicom 4400R (slave) +134 Adlink RTV24 +135 DViCO FusionHDTV 5 Lite 18ac:d500 +136 Acorp Y878F 9511:1540 +137 Conceptronic CTVFMi v2 036e:109e +138 Prolink Pixelview PV-BT878P+ (Rev.2E) +139 Prolink PixelView PlayTV MPEG2 PV-M4900 +140 Osprey 440 0070:ff07 +141 Asound Skyeye PCTV +142 Sabrent TV-FM (bttv version) +143 Hauppauge ImpactVCB (bt878) 0070:13eb +144 MagicTV +145 SSAI Security Video Interface 4149:5353 +146 SSAI Ultrasound Video Interface 414a:5353 +147 VoodooTV 200 (USA) 121a:3000 +148 DViCO FusionHDTV 2 dbc0:d200 +149 Typhoon TV-Tuner PCI (50684) +150 Geovision GV-600 008a:763c +151 Kozumi KTV-01C +152 Encore ENL TV-FM-2 1000:1801 +153 PHYTEC VD-012 (bt878) +154 PHYTEC VD-012-X1 (bt878) +155 PHYTEC VD-012-X2 (bt878) +156 IVCE-8784 0000:f050, 0001:f050, 0002:f050, 0003:f050 +157 Geovision GV-800(S) (master) 800a:763d +158 Geovision GV-800(S) (slave) 800b:763d, 800c:763d, 800d:763d +159 ProVideo PV183 1830:1540, 1831:1540, 1832:1540, 1833:1540, 1834:1540, 1835:1540, 1836:1540, 1837:1540 +160 Tongwei Video Technology TD-3116 f200:3116 +161 Aposonic W-DVR 0279:0228 +162 Adlink MPG24 +163 Bt848 Capture 14MHz +164 CyberVision CV06 (SV) +165 Kworld V-Stream Xpert TV PVR878 +166 PCI-8604PW +=========== ================================================================================= ============================================================================================================================================================================== diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst b/Documentation/media/v4l-drivers/cx23885-cardlist.rst index f38003255b9a..fd20b50d2c1d 100644 --- a/Documentation/media/v4l-drivers/cx23885-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx23885-cardlist.rst @@ -1,63 +1,65 @@ cx23885 cards list ================== -.. code-block:: none - - 0 -> UNKNOWN/GENERIC [0070:3400] - 1 -> Hauppauge WinTV-HVR1800lp [0070:7600] - 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801,0070:7809] - 3 -> Hauppauge WinTV-HVR1250 [0070:7911] - 4 -> DViCO FusionHDTV5 Express [18ac:d500] - 5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797] - 6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717] - 7 -> Hauppauge WinTV-HVR1200 [0070:71d1,0070:71d3] - 8 -> Hauppauge WinTV-HVR1700 [0070:8101] - 9 -> Hauppauge WinTV-HVR1400 [0070:8010] - 10 -> DViCO FusionHDTV7 Dual Express [18ac:d618] - 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78] - 12 -> Leadtek Winfast PxDVR3200 H [107d:6681] - 13 -> Compro VideoMate E650F [185b:e800] - 14 -> TurboSight TBS 6920 [6920:8888] - 15 -> TeVii S470 [d470:9022] - 16 -> DVBWorld DVB-S2 2005 [0001:2005] - 17 -> NetUP Dual DVB-S2 CI [1b55:2a2c] - 18 -> Hauppauge WinTV-HVR1270 [0070:2211] - 19 -> Hauppauge WinTV-HVR1275 [0070:2215,0070:221d,0070:22f2] - 20 -> Hauppauge WinTV-HVR1255 [0070:2251,0070:22f1] - 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295,0070:2299,0070:229d,0070:22f0,0070:22f3,0070:22f4,0070:22f5] - 22 -> Mygica X8506 DMB-TH [14f1:8651] - 23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657] - 24 -> Hauppauge WinTV-HVR1850 [0070:8541] - 25 -> Compro VideoMate E800 [1858:e800] - 26 -> Hauppauge WinTV-HVR1290 [0070:8551] - 27 -> Mygica X8558 PRO DMB-TH [14f1:8578] - 28 -> LEADTEK WinFast PxTV1200 [107d:6f22] - 29 -> GoTView X5 3D Hybrid [5654:2390] - 30 -> NetUP Dual DVB-T/C-CI RF [1b55:e2e4] - 31 -> Leadtek Winfast PxDVR3200 H XC4000 [107d:6f39] - 32 -> MPX-885 - 33 -> Mygica X8502/X8507 ISDB-T [14f1:8502] - 34 -> TerraTec Cinergy T PCIe Dual [153b:117e] - 35 -> TeVii S471 [d471:9022] - 36 -> Hauppauge WinTV-HVR1255 [0070:2259] - 37 -> Prof Revolution DVB-S2 8000 [8000:3034] - 38 -> Hauppauge WinTV-HVR4400/HVR5500 [0070:c108,0070:c138,0070:c1f8] - 39 -> AVerTV Hybrid Express Slim HC81R [1461:d939] - 40 -> TurboSight TBS 6981 [6981:8888] - 41 -> TurboSight TBS 6980 [6980:8888] - 42 -> Leadtek Winfast PxPVR2200 [107d:6f21] - 43 -> Hauppauge ImpactVCB-e [0070:7133] - 44 -> DViCO FusionHDTV DVB-T Dual Express2 [18ac:db98] - 45 -> DVBSky T9580 [4254:9580] - 46 -> DVBSky T980C [4254:980c] - 47 -> DVBSky S950C [4254:950c] - 48 -> Technotrend TT-budget CT2-4500 CI [13c2:3013] - 49 -> DVBSky S950 [4254:0950] - 50 -> DVBSky S952 [4254:0952] - 51 -> DVBSky T982 [4254:0982] - 52 -> Hauppauge WinTV-HVR5525 [0070:f038] - 53 -> Hauppauge WinTV Starburst [0070:c12a] - 54 -> ViewCast 260e [1576:0260] - 55 -> ViewCast 460e [1576:0460] - 56 -> Hauppauge WinTV-QuadHD-DVB [0070:6a28,0070:6b28] - 57 -> Hauppauge WinTV-QuadHD-ATSC [0070:6a18,0070:6b18] +=========== ==================================== ====================================================================================== +Card number Card name PCI IDs +=========== ==================================== ====================================================================================== +0 UNKNOWN/GENERIC 0070:3400 +1 Hauppauge WinTV-HVR1800lp 0070:7600 +2 Hauppauge WinTV-HVR1800 0070:7800, 0070:7801, 0070:7809 +3 Hauppauge WinTV-HVR1250 0070:7911 +4 DViCO FusionHDTV5 Express 18ac:d500 +5 Hauppauge WinTV-HVR1500Q 0070:7790, 0070:7797 +6 Hauppauge WinTV-HVR1500 0070:7710, 0070:7717 +7 Hauppauge WinTV-HVR1200 0070:71d1, 0070:71d3 +8 Hauppauge WinTV-HVR1700 0070:8101 +9 Hauppauge WinTV-HVR1400 0070:8010 +10 DViCO FusionHDTV7 Dual Express 18ac:d618 +11 DViCO FusionHDTV DVB-T Dual Express 18ac:db78 +12 Leadtek Winfast PxDVR3200 H 107d:6681 +13 Compro VideoMate E650F 185b:e800 +14 TurboSight TBS 6920 6920:8888 +15 TeVii S470 d470:9022 +16 DVBWorld DVB-S2 2005 0001:2005 +17 NetUP Dual DVB-S2 CI 1b55:2a2c +18 Hauppauge WinTV-HVR1270 0070:2211 +19 Hauppauge WinTV-HVR1275 0070:2215, 0070:221d, 0070:22f2 +20 Hauppauge WinTV-HVR1255 0070:2251, 0070:22f1 +21 Hauppauge WinTV-HVR1210 0070:2291, 0070:2295, 0070:2299, 0070:229d, 0070:22f0, 0070:22f3, 0070:22f4, 0070:22f5 +22 Mygica X8506 DMB-TH 14f1:8651 +23 Magic-Pro ProHDTV Extreme 2 14f1:8657 +24 Hauppauge WinTV-HVR1850 0070:8541 +25 Compro VideoMate E800 1858:e800 +26 Hauppauge WinTV-HVR1290 0070:8551 +27 Mygica X8558 PRO DMB-TH 14f1:8578 +28 LEADTEK WinFast PxTV1200 107d:6f22 +29 GoTView X5 3D Hybrid 5654:2390 +30 NetUP Dual DVB-T/C-CI RF 1b55:e2e4 +31 Leadtek Winfast PxDVR3200 H XC4000 107d:6f39 +32 MPX-885 +33 Mygica X8502/X8507 ISDB-T 14f1:8502 +34 TerraTec Cinergy T PCIe Dual 153b:117e +35 TeVii S471 d471:9022 +36 Hauppauge WinTV-HVR1255 0070:2259 +37 Prof Revolution DVB-S2 8000 8000:3034 +38 Hauppauge WinTV-HVR4400/HVR5500 0070:c108, 0070:c138, 0070:c1f8 +39 AVerTV Hybrid Express Slim HC81R 1461:d939 +40 TurboSight TBS 6981 6981:8888 +41 TurboSight TBS 6980 6980:8888 +42 Leadtek Winfast PxPVR2200 107d:6f21 +43 Hauppauge ImpactVCB-e 0070:7133 +44 DViCO FusionHDTV DVB-T Dual Express2 18ac:db98 +45 DVBSky T9580 4254:9580 +46 DVBSky T980C 4254:980c +47 DVBSky S950C 4254:950c +48 Technotrend TT-budget CT2-4500 CI 13c2:3013 +49 DVBSky S950 4254:0950 +50 DVBSky S952 4254:0952 +51 DVBSky T982 4254:0982 +52 Hauppauge WinTV-HVR5525 0070:f038 +53 Hauppauge WinTV Starburst 0070:c12a +54 ViewCast 260e 1576:0260 +55 ViewCast 460e 1576:0460 +56 Hauppauge WinTV-QuadHD-DVB 0070:6a28, 0070:6b28 +57 Hauppauge WinTV-QuadHD-ATSC 0070:6a18, 0070:6b18 +=========== ==================================== ====================================================================================== diff --git a/Documentation/media/v4l-drivers/cx88-cardlist.rst b/Documentation/media/v4l-drivers/cx88-cardlist.rst index 01128341e1ea..8cc1cea17035 100644 --- a/Documentation/media/v4l-drivers/cx88-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx88-cardlist.rst @@ -1,96 +1,98 @@ CX88 cards list =============== -.. code-block:: none - - 0 -> UNKNOWN/GENERIC - 1 -> Hauppauge WinTV 34xxx models [0070:3400,0070:3401] - 2 -> GDI Black Gold [14c7:0106,14c7:0107] - 3 -> PixelView [1554:4811] - 4 -> ATI TV Wonder Pro [1002:00f8,1002:00f9] - 5 -> Leadtek Winfast 2000XP Expert [107d:6611,107d:6613] - 6 -> AverTV Studio 303 (M126) [1461:000b] - 7 -> MSI TV-@nywhere Master [1462:8606] - 8 -> Leadtek Winfast DV2000 [107d:6620,107d:6621] - 9 -> Leadtek PVR 2000 [107d:663b,107d:663c,107d:6632,107d:6630,107d:6638,107d:6631,107d:6637,107d:663d] - 10 -> IODATA GV-VCP3/PCI [10fc:d003] - 11 -> Prolink PlayTV PVR - 12 -> ASUS PVR-416 [1043:4823,1461:c111] - 13 -> MSI TV-@nywhere - 14 -> KWorld/VStream XPert DVB-T [17de:08a6] - 15 -> DViCO FusionHDTV DVB-T1 [18ac:db00] - 16 -> KWorld LTV883RF - 17 -> DViCO FusionHDTV 3 Gold-Q [18ac:d810,18ac:d800] - 18 -> Hauppauge Nova-T DVB-T [0070:9002,0070:9001,0070:9000] - 19 -> Conexant DVB-T reference design [14f1:0187] - 20 -> Provideo PV259 [1540:2580] - 21 -> DViCO FusionHDTV DVB-T Plus [18ac:db10,18ac:db11] - 22 -> pcHDTV HD3000 HDTV [7063:3000] - 23 -> digitalnow DNTV Live! DVB-T [17de:a8a6] - 24 -> Hauppauge WinTV 28xxx (Roslyn) models [0070:2801] - 25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) [14f1:0342] - 26 -> IODATA GV/BCTV7E [10fc:d035] - 27 -> PixelView PlayTV Ultra Pro (Stereo) - 28 -> DViCO FusionHDTV 3 Gold-T [18ac:d820] - 29 -> ADS Tech Instant TV DVB-T PCI [1421:0334] - 30 -> TerraTec Cinergy 1400 DVB-T [153b:1166] - 31 -> DViCO FusionHDTV 5 Gold [18ac:d500] - 32 -> AverMedia UltraTV Media Center PCI 550 [1461:8011] - 33 -> Kworld V-Stream Xpert DVD - 34 -> ATI HDTV Wonder [1002:a101] - 35 -> WinFast DTV1000-T [107d:665f] - 36 -> AVerTV 303 (M126) [1461:000a] - 37 -> Hauppauge Nova-S-Plus DVB-S [0070:9201,0070:9202] - 38 -> Hauppauge Nova-SE2 DVB-S [0070:9200] - 39 -> KWorld DVB-S 100 [17de:08b2,1421:0341] - 40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid [0070:9400,0070:9402] - 41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) [0070:9800,0070:9802] - 42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025,1822:0019] - 43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1,12ab:2300] - 44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54] - 45 -> KWorld HardwareMpegTV XPert [17de:0840,1421:0305] - 46 -> DViCO FusionHDTV DVB-T Hybrid [18ac:db40,18ac:db44] - 47 -> pcHDTV HD5500 HDTV [7063:5500] - 48 -> Kworld MCE 200 Deluxe [17de:0841] - 49 -> PixelView PlayTV P7000 [1554:4813] - 50 -> NPG Tech Real TV FM Top 10 [14f1:0842] - 51 -> WinFast DTV2000 H [107d:665e] - 52 -> Geniatech DVB-S [14f1:0084] - 53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [0070:1404,0070:1400,0070:1401,0070:1402] - 54 -> Norwood Micro TV Tuner - 55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980] - 56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602] - 57 -> ADS Tech Instant Video PCI [1421:0390] - 58 -> Pinnacle PCTV HD 800i [11bd:0051] - 59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530] - 60 -> Pinnacle Hybrid PCTV [12ab:1788] - 61 -> Leadtek TV2000 XP Global [107d:6f18,107d:6618,107d:6619] - 62 -> PowerColor RA330 [14f1:ea3d] - 63 -> Geniatech X8000-MT DVBT [14f1:8852] - 64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30] - 65 -> DViCO FusionHDTV 7 Gold [18ac:d610] - 66 -> Prolink Pixelview MPEG 8000GT [1554:4935] - 67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1] - 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902] - 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906] - 70 -> TeVii S460 DVB-S/S2 [d460:9022] - 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011] - 72 -> TBS 8920 DVB-S/S2 [8920:8888] - 73 -> TeVii S420 DVB-S [d420:9022] - 74 -> Prolink Pixelview Global Extreme [1554:4976] - 75 -> PROF 7300 DVB-S/S2 [B033:3033] - 76 -> SATTRADE ST4200 DVB-S/S2 [b200:4200] - 77 -> TBS 8910 DVB-S [8910:8888] - 78 -> Prof 6200 DVB-S [b022:3022] - 79 -> Terratec Cinergy HT PCI MKII [153b:1177] - 80 -> Hauppauge WinTV-IR Only [0070:9290] - 81 -> Leadtek WinFast DTV1800 Hybrid [107d:6654] - 82 -> WinFast DTV2000 H rev. J [107d:6f2b] - 83 -> Prof 7301 DVB-S/S2 [b034:3034] - 84 -> Samsung SMT 7020 DVB-S [18ac:dc00,18ac:dccd] - 85 -> Twinhan VP-1027 DVB-S [1822:0023] - 86 -> TeVii S464 DVB-S/S2 [d464:9022] - 87 -> Leadtek WinFast DTV2000 H PLUS [107d:6f42] - 88 -> Leadtek WinFast DTV1800 H (XC4000) [107d:6f38] - 89 -> Leadtek TV2000 XP Global (SC4100) [107d:6f36] - 90 -> Leadtek TV2000 XP Global (XC4100) [107d:6f43] +=========== =================================================== ====================================================================================== +Card number Card name PCI IDs +=========== =================================================== ====================================================================================== +0 UNKNOWN/GENERIC +1 Hauppauge WinTV 34xxx models 0070:3400, 0070:3401 +2 GDI Black Gold 14c7:0106, 14c7:0107 +3 PixelView 1554:4811 +4 ATI TV Wonder Pro 1002:00f8, 1002:00f9 +5 Leadtek Winfast 2000XP Expert 107d:6611, 107d:6613 +6 AverTV Studio 303 (M126) 1461:000b +7 MSI TV-@nywhere Master 1462:8606 +8 Leadtek Winfast DV2000 107d:6620, 107d:6621 +9 Leadtek PVR 2000 107d:663b, 107d:663c, 107d:6632, 107d:6630, 107d:6638, 107d:6631, 107d:6637, 107d:663d +10 IODATA GV-VCP3/PCI 10fc:d003 +11 Prolink PlayTV PVR +12 ASUS PVR-416 1043:4823, 1461:c111 +13 MSI TV-@nywhere +14 KWorld/VStream XPert DVB-T 17de:08a6 +15 DViCO FusionHDTV DVB-T1 18ac:db00 +16 KWorld LTV883RF +17 DViCO FusionHDTV 3 Gold-Q 18ac:d810, 18ac:d800 +18 Hauppauge Nova-T DVB-T 0070:9002, 0070:9001, 0070:9000 +19 Conexant DVB-T reference design 14f1:0187 +20 Provideo PV259 1540:2580 +21 DViCO FusionHDTV DVB-T Plus 18ac:db10, 18ac:db11 +22 pcHDTV HD3000 HDTV 7063:3000 +23 digitalnow DNTV Live! DVB-T 17de:a8a6 +24 Hauppauge WinTV 28xxx (Roslyn) models 0070:2801 +25 Digital-Logic MICROSPACE Entertainment Center (MEC) 14f1:0342 +26 IODATA GV/BCTV7E 10fc:d035 +27 PixelView PlayTV Ultra Pro (Stereo) +28 DViCO FusionHDTV 3 Gold-T 18ac:d820 +29 ADS Tech Instant TV DVB-T PCI 1421:0334 +30 TerraTec Cinergy 1400 DVB-T 153b:1166 +31 DViCO FusionHDTV 5 Gold 18ac:d500 +32 AverMedia UltraTV Media Center PCI 550 1461:8011 +33 Kworld V-Stream Xpert DVD +34 ATI HDTV Wonder 1002:a101 +35 WinFast DTV1000-T 107d:665f +36 AVerTV 303 (M126) 1461:000a +37 Hauppauge Nova-S-Plus DVB-S 0070:9201, 0070:9202 +38 Hauppauge Nova-SE2 DVB-S 0070:9200 +39 KWorld DVB-S 100 17de:08b2, 1421:0341 +40 Hauppauge WinTV-HVR1100 DVB-T/Hybrid 0070:9400, 0070:9402 +41 Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) 0070:9800, 0070:9802 +42 digitalnow DNTV Live! DVB-T Pro 1822:0025, 1822:0019 +43 KWorld/VStream XPert DVB-T with cx22702 17de:08a1, 12ab:2300 +44 DViCO FusionHDTV DVB-T Dual Digital 18ac:db50, 18ac:db54 +45 KWorld HardwareMpegTV XPert 17de:0840, 1421:0305 +46 DViCO FusionHDTV DVB-T Hybrid 18ac:db40, 18ac:db44 +47 pcHDTV HD5500 HDTV 7063:5500 +48 Kworld MCE 200 Deluxe 17de:0841 +49 PixelView PlayTV P7000 1554:4813 +50 NPG Tech Real TV FM Top 10 14f1:0842 +51 WinFast DTV2000 H 107d:665e +52 Geniatech DVB-S 14f1:0084 +53 Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T 0070:1404, 0070:1400, 0070:1401, 0070:1402 +54 Norwood Micro TV Tuner +55 Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM c180:c980 +56 Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder 0070:9600, 0070:9601, 0070:9602 +57 ADS Tech Instant Video PCI 1421:0390 +58 Pinnacle PCTV HD 800i 11bd:0051 +59 DViCO FusionHDTV 5 PCI nano 18ac:d530 +60 Pinnacle Hybrid PCTV 12ab:1788 +61 Leadtek TV2000 XP Global 107d:6f18, 107d:6618, 107d:6619 +62 PowerColor RA330 14f1:ea3d +63 Geniatech X8000-MT DVBT 14f1:8852 +64 DViCO FusionHDTV DVB-T PRO 18ac:db30 +65 DViCO FusionHDTV 7 Gold 18ac:d610 +66 Prolink Pixelview MPEG 8000GT 1554:4935 +67 Kworld PlusTV HD PCI 120 (ATSC 120) 17de:08c1 +68 Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid 0070:6900, 0070:6904, 0070:6902 +69 Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 0070:6905, 0070:6906 +70 TeVii S460 DVB-S/S2 d460:9022 +71 Omicom SS4 DVB-S/S2 PCI A044:2011 +72 TBS 8920 DVB-S/S2 8920:8888 +73 TeVii S420 DVB-S d420:9022 +74 Prolink Pixelview Global Extreme 1554:4976 +75 PROF 7300 DVB-S/S2 B033:3033 +76 SATTRADE ST4200 DVB-S/S2 b200:4200 +77 TBS 8910 DVB-S 8910:8888 +78 Prof 6200 DVB-S b022:3022 +79 Terratec Cinergy HT PCI MKII 153b:1177 +80 Hauppauge WinTV-IR Only 0070:9290 +81 Leadtek WinFast DTV1800 Hybrid 107d:6654 +82 WinFast DTV2000 H rev. J 107d:6f2b +83 Prof 7301 DVB-S/S2 b034:3034 +84 Samsung SMT 7020 DVB-S 18ac:dc00, 18ac:dccd +85 Twinhan VP-1027 DVB-S 1822:0023 +86 TeVii S464 DVB-S/S2 d464:9022 +87 Leadtek WinFast DTV2000 H PLUS 107d:6f42 +88 Leadtek WinFast DTV1800 H (XC4000) 107d:6f38 +89 Leadtek TV2000 XP Global (SC4100) 107d:6f36 +90 Leadtek TV2000 XP Global (XC4100) 107d:6f43 +=========== =================================================== ====================================================================================== diff --git a/Documentation/media/v4l-drivers/em28xx-cardlist.rst b/Documentation/media/v4l-drivers/em28xx-cardlist.rst index e72f2e5c0898..76b1d301754c 100644 --- a/Documentation/media/v4l-drivers/em28xx-cardlist.rst +++ b/Documentation/media/v4l-drivers/em28xx-cardlist.rst @@ -1,105 +1,107 @@ EM28xx cards list ================= -.. code-block:: none - - 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2863,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868,eb1a:2875] - 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] - 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] - 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] - 5 -> MSI VOX USB 2.0 (em2820/em2840) - 6 -> Terratec Cinergy 200 USB (em2800) - 7 -> Leadtek Winfast USB II (em2800) [0413:6023] - 8 -> Kworld USB2800 (em2800) - 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a,093b:a003] - 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] - 11 -> Terratec Hybrid XS (em2880) - 12 -> Kworld PVR TV 2800 RF (em2820/em2840) - 13 -> Terratec Prodigy XS (em2880) - 14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) - 15 -> V-Gear PocketTV (em2800) - 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b] - 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] - 18 -> Hauppauge WinTV HVR 900 (R2) (em2880) [2040:6502] - 19 -> EM2860/SAA711X Reference Design (em2860) - 20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002] - 21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801] - 22 -> EM2710/EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751] - 23 -> Huaqi DLCW-130 (em2750) - 24 -> D-Link DUB-T210 TV Tuner (em2820/em2840) [2001:f112] - 25 -> Gadmei UTV310 (em2820/em2840) - 26 -> Hercules Smart TV USB 2.0 (em2820/em2840) - 27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) (em2820/em2840) - 28 -> Leadtek Winfast USB II Deluxe (em2820/em2840) - 29 -> EM2860/TVP5150 Reference Design (em2860) - 30 -> Videology 20K14XUSB USB2.0 (em2820/em2840) - 31 -> Usbgear VD204v9 (em2821) - 32 -> Supercomp USB 2.0 TV (em2821) - 33 -> Elgato Video Capture (em2860) [0fd9:0033] - 34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f] - 35 -> Typhoon DVD Maker (em2860) - 36 -> NetGMBH Cam (em2860) - 37 -> Gadmei UTV330 (em2860) [eb1a:50a6] - 38 -> Yakumo MovieMixer (em2861) - 39 -> KWorld PVRTV 300U (em2861) [eb1a:e300] - 40 -> Plextor ConvertX PX-TV100U (em2861) [093b:a005] - 41 -> Kworld 350 U DVB-T (em2870) [eb1a:e350] - 42 -> Kworld 355 U DVB-T (em2870) [eb1a:e355,eb1a:e357,eb1a:e359] - 43 -> Terratec Cinergy T XS (em2870) - 44 -> Terratec Cinergy T XS (MT2060) (em2870) [0ccd:0043] - 45 -> Pinnacle PCTV DVB-T (em2870) - 46 -> Compro, VideoMate U3 (em2870) [185b:2870] - 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] - 48 -> KWorld DVB-T 310U (em2880) - 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] - 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] - 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] - 52 -> DNT DA2 Hybrid (em2881) - 53 -> Pinnacle Hybrid Pro (em2881) - 54 -> Kworld VS-DVB-T 323UR (em2882) [eb1a:e323] - 55 -> Terratec Cinnergy Hybrid T USB XS (em2882) (em2882) [0ccd:005e,0ccd:0042] - 56 -> Pinnacle Hybrid Pro (330e) (em2882) [2304:0226] - 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] - 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] - 59 -> Pinnacle PCTV HD Mini (em2874) [2304:023f] - 60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f] - 61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840) - 62 -> Gadmei TVR200 (em2820/em2840) - 63 -> Kaiomy TVnPC U2 (em2860) [eb1a:e303] - 64 -> Easy Cap Capture DC-60 (em2860) [1b80:e309] - 65 -> IO-DATA GV-MVP/SZ (em2820/em2840) [04bb:0515] - 66 -> Empire dual TV (em2880) - 67 -> Terratec Grabby (em2860) [0ccd:0096,0ccd:10AF] - 68 -> Terratec AV350 (em2860) [0ccd:0084] - 69 -> KWorld ATSC 315U HDTV TV Box (em2882) [eb1a:a313] - 70 -> Evga inDtube (em2882) - 71 -> Silvercrest Webcam 1.3mpix (em2820/em2840) - 72 -> Gadmei UTV330+ (em2861) - 73 -> Reddo DVB-C USB TV Box (em2870) - 74 -> Actionmaster/LinXcel/Digitus VC211A (em2800) - 75 -> Dikom DK300 (em2882) - 76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340] - 77 -> EM2874 Leadership ISDBT (em2874) - 78 -> PCTV nanoStick T2 290e (em28174) [2013:024f] - 79 -> Terratec Cinergy H5 (em2884) [eb1a:2885,0ccd:10a2,0ccd:10ad,0ccd:10b6] - 80 -> PCTV DVB-S2 Stick (460e) (em28174) [2013:024c] - 81 -> Hauppauge WinTV HVR 930C (em2884) [2040:1605] - 82 -> Terratec Cinergy HTC Stick (em2884) [0ccd:00b2] - 83 -> Honestech Vidbox NW03 (em2860) [eb1a:5006] - 84 -> MaxMedia UB425-TC (em2874) [1b80:e425] - 85 -> PCTV QuatroStick (510e) (em2884) [2304:0242] - 86 -> PCTV QuatroStick nano (520e) (em2884) [2013:0251] - 87 -> Terratec Cinergy HTC USB XS (em2884) [0ccd:008e,0ccd:00ac] - 88 -> C3 Tech Digital Duo HDTV/SDTV USB (em2884) [1b80:e755] - 89 -> Delock 61959 (em2874) [1b80:e1cc] - 90 -> KWorld USB ATSC TV Stick UB435-Q V2 (em2874) [1b80:e346] - 91 -> SpeedLink Vicious And Devine Laplace webcam (em2765) [1ae7:9003,1ae7:9004] - 92 -> PCTV DVB-S2 Stick (461e) (em28178) [2013:0258] - 93 -> KWorld USB ATSC TV Stick UB435-Q V3 (em2874) [1b80:e34c] - 94 -> PCTV tripleStick (292e) (em28178) [2013:025f,2040:0264] - 95 -> Leadtek VC100 (em2861) [0413:6f07] - 96 -> Terratec Cinergy T2 Stick HD (em28178) [eb1a:8179] - 97 -> Elgato EyeTV Hybrid 2008 INT (em2884) [0fd9:0018] - 98 -> PLEX PX-BCUD (em28178) [3275:0085] - 99 -> Hauppauge WinTV-dualHD DVB (em28174) [2040:0265] +=========== ==================================================================== ================ ================================================================================================================================== +Card number Card name Empia Chip USB IDs +=========== ==================================================================== ================ ================================================================================================================================== +0 Unknown EM2800 video grabber em2800 eb1a:2800 +1 Unknown EM2750/28xx video grabber em2820 or em2840 eb1a:2710, eb1a:2820, eb1a:2821, eb1a:2860, eb1a:2861, eb1a:2862, eb1a:2863, eb1a:2870, eb1a:2881, eb1a:2883, eb1a:2868, eb1a:2875 +2 Terratec Cinergy 250 USB em2820 or em2840 0ccd:0036 +3 Pinnacle PCTV USB 2 em2820 or em2840 2304:0208 +4 Hauppauge WinTV USB 2 em2820 or em2840 2040:4200, 2040:4201 +5 MSI VOX USB 2.0 em2820 or em2840 +6 Terratec Cinergy 200 USB em2800 +7 Leadtek Winfast USB II em2800 0413:6023 +8 Kworld USB2800 em2800 +9 Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker em2820 or em2840 1b80:e302, 1b80:e304, 2304:0207, 2304:021a, 093b:a003 +10 Hauppauge WinTV HVR 900 em2880 2040:6500 +11 Terratec Hybrid XS em2880 +12 Kworld PVR TV 2800 RF em2820 or em2840 +13 Terratec Prodigy XS em2880 +14 SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 em2820 or em2840 +15 V-Gear PocketTV em2800 +16 Hauppauge WinTV HVR 950 em2883 2040:6513, 2040:6517, 2040:651b +17 Pinnacle PCTV HD Pro Stick em2880 2304:0227 +18 Hauppauge WinTV HVR 900 (R2) em2880 2040:6502 +19 EM2860/SAA711X Reference Design em2860 +20 AMD ATI TV Wonder HD 600 em2880 0438:b002 +21 eMPIA Technology, Inc. GrabBeeX+ Video Encoder em2800 eb1a:2801 +22 EM2710/EM2750/EM2751 webcam grabber em2750 eb1a:2750, eb1a:2751 +23 Huaqi DLCW-130 em2750 +24 D-Link DUB-T210 TV Tuner em2820 or em2840 2001:f112 +25 Gadmei UTV310 em2820 or em2840 +26 Hercules Smart TV USB 2.0 em2820 or em2840 +27 Pinnacle PCTV USB 2 (Philips FM1216ME) em2820 or em2840 +28 Leadtek Winfast USB II Deluxe em2820 or em2840 +29 EM2860/TVP5150 Reference Design em2860 +30 Videology 20K14XUSB USB2.0 em2820 or em2840 +31 Usbgear VD204v9 em2821 +32 Supercomp USB 2.0 TV em2821 +33 Elgato Video Capture em2860 0fd9:0033 +34 Terratec Cinergy A Hybrid XS em2860 0ccd:004f +35 Typhoon DVD Maker em2860 +36 NetGMBH Cam em2860 +37 Gadmei UTV330 em2860 eb1a:50a6 +38 Yakumo MovieMixer em2861 +39 KWorld PVRTV 300U em2861 eb1a:e300 +40 Plextor ConvertX PX-TV100U em2861 093b:a005 +41 Kworld 350 U DVB-T em2870 eb1a:e350 +42 Kworld 355 U DVB-T em2870 eb1a:e355, eb1a:e357, eb1a:e359 +43 Terratec Cinergy T XS em2870 +44 Terratec Cinergy T XS (MT2060) em2870 0ccd:0043 +45 Pinnacle PCTV DVB-T em2870 +46 Compro, VideoMate U3 em2870 185b:2870 +47 KWorld DVB-T 305U em2880 eb1a:e305 +48 KWorld DVB-T 310U em2880 +49 MSI DigiVox A/D em2880 eb1a:e310 +50 MSI DigiVox A/D II em2880 eb1a:e320 +51 Terratec Hybrid XS Secam em2880 0ccd:004c +52 DNT DA2 Hybrid em2881 +53 Pinnacle Hybrid Pro em2881 +54 Kworld VS-DVB-T 323UR em2882 eb1a:e323 +55 Terratec Cinnergy Hybrid T USB XS (em2882) em2882 0ccd:005e, 0ccd:0042 +56 Pinnacle Hybrid Pro (330e) em2882 2304:0226 +57 Kworld PlusTV HD Hybrid 330 em2883 eb1a:a316 +58 Compro VideoMate ForYou/Stereo em2820 or em2840 185b:2041 +59 Pinnacle PCTV HD Mini em2874 2304:023f +60 Hauppauge WinTV HVR 850 em2883 2040:651f +61 Pixelview PlayTV Box 4 USB 2.0 em2820 or em2840 +62 Gadmei TVR200 em2820 or em2840 +63 Kaiomy TVnPC U2 em2860 eb1a:e303 +64 Easy Cap Capture DC-60 em2860 1b80:e309 +65 IO-DATA GV-MVP/SZ em2820 or em2840 04bb:0515 +66 Empire dual TV em2880 +67 Terratec Grabby em2860 0ccd:0096, 0ccd:10AF +68 Terratec AV350 em2860 0ccd:0084 +69 KWorld ATSC 315U HDTV TV Box em2882 eb1a:a313 +70 Evga inDtube em2882 +71 Silvercrest Webcam 1.3mpix em2820 or em2840 +72 Gadmei UTV330+ em2861 +73 Reddo DVB-C USB TV Box em2870 +74 Actionmaster/LinXcel/Digitus VC211A em2800 +75 Dikom DK300 em2882 +76 KWorld PlusTV 340U or UB435-Q (ATSC) em2870 1b80:a340 +77 EM2874 Leadership ISDBT em2874 +78 PCTV nanoStick T2 290e em28174 2013:024f +79 Terratec Cinergy H5 em2884 eb1a:2885, 0ccd:10a2, 0ccd:10ad, 0ccd:10b6 +80 PCTV DVB-S2 Stick (460e) em28174 2013:024c +81 Hauppauge WinTV HVR 930C em2884 2040:1605 +82 Terratec Cinergy HTC Stick em2884 0ccd:00b2 +83 Honestech Vidbox NW03 em2860 eb1a:5006 +84 MaxMedia UB425-TC em2874 1b80:e425 +85 PCTV QuatroStick (510e) em2884 2304:0242 +86 PCTV QuatroStick nano (520e) em2884 2013:0251 +87 Terratec Cinergy HTC USB XS em2884 0ccd:008e, 0ccd:00ac +88 C3 Tech Digital Duo HDTV/SDTV USB em2884 1b80:e755 +89 Delock 61959 em2874 1b80:e1cc +90 KWorld USB ATSC TV Stick UB435-Q V2 em2874 1b80:e346 +91 SpeedLink Vicious And Devine Laplace webcam em2765 1ae7:9003, 1ae7:9004 +92 PCTV DVB-S2 Stick (461e) em28178 2013:0258 +93 KWorld USB ATSC TV Stick UB435-Q V3 em2874 1b80:e34c +94 PCTV tripleStick (292e) em28178 2013:025f, 2040:0264 +95 Leadtek VC100 em2861 0413:6f07 +96 Terratec Cinergy T2 Stick HD em28178 eb1a:8179 +97 Elgato EyeTV Hybrid 2008 INT em2884 0fd9:0018 +98 PLEX PX-BCUD em28178 3275:0085 +99 Hauppauge WinTV-dualHD DVB em28174 2040:0265 +=========== ==================================================================== ================ ================================================================================================================================== diff --git a/Documentation/media/v4l-drivers/gspca-cardlist.rst b/Documentation/media/v4l-drivers/gspca-cardlist.rst index 33a8ac7d73ab..e18d87e80d78 100644 --- a/Documentation/media/v4l-drivers/gspca-cardlist.rst +++ b/Documentation/media/v4l-drivers/gspca-cardlist.rst @@ -6,407 +6,444 @@ The modules for the gspca webcam drivers are: - gspca_main: main driver - gspca\_\ *driver*: subdriver module with *driver* as follows -========= ========= ==================================================================== +========= ========= =================================================================== *driver* vend:prod Device -========= ========= ==================================================================== -spca501 0000:0000 MystFromOri Unknown Camera -spca508 0130:0130 Clone Digital Webcam 11043 -zc3xx 03f0:1b07 HP Premium Starter Cam -m5602 0402:5602 ALi Video Camera Controller -spca501 040a:0002 Kodak DVC-325 -spca500 040a:0300 Kodak EZ200 -zc3xx 041e:041e Creative WebCam Live! -ov519 041e:4003 Video Blaster WebCam Go Plus -spca500 041e:400a Creative PC-CAM 300 -sunplus 041e:400b Creative PC-CAM 600 -sunplus 041e:4012 PC-Cam350 -sunplus 041e:4013 Creative Pccam750 -zc3xx 041e:4017 Creative Webcam Mobile PD1090 -spca508 041e:4018 Creative Webcam Vista (PD1100) -spca561 041e:401a Creative Webcam Vista (PD1100) -zc3xx 041e:401c Creative NX -spca505 041e:401d Creative Webcam NX ULTRA -zc3xx 041e:401e Creative Nx Pro -zc3xx 041e:401f Creative Webcam Notebook PD1171 -pac207 041e:4028 Creative Webcam Vista Plus -zc3xx 041e:4029 Creative WebCam Vista Pro -zc3xx 041e:4034 Creative Instant P0620 -zc3xx 041e:4035 Creative Instant P0620D -zc3xx 041e:4036 Creative Live ! -sq930x 041e:4038 Creative Joy-IT -zc3xx 041e:403a Creative Nx Pro 2 -spca561 041e:403b Creative Webcam Vista (VF0010) -sq930x 041e:403c Creative Live! Ultra -sq930x 041e:403d Creative Live! Ultra for Notebooks -sq930x 041e:4041 Creative Live! Motion -zc3xx 041e:4051 Creative Live!Cam Notebook Pro (VF0250) -ov519 041e:4052 Creative Live! VISTA IM -zc3xx 041e:4053 Creative Live!Cam Video IM -vc032x 041e:405b Creative Live! Cam Notebook Ultra (VC0130) -ov519 041e:405f Creative Live! VISTA VF0330 -ov519 041e:4060 Creative Live! VISTA VF0350 -ov519 041e:4061 Creative Live! VISTA VF0400 -ov519 041e:4064 Creative Live! VISTA VF0420 -ov519 041e:4067 Creative Live! Cam Video IM (VF0350) -ov519 041e:4068 Creative Live! VISTA VF0470 -spca561 0458:7004 Genius VideoCAM Express V2 -sn9c2028 0458:7005 Genius Smart 300, version 2 -sunplus 0458:7006 Genius Dsc 1.3 Smart -zc3xx 0458:7007 Genius VideoCam V2 -zc3xx 0458:700c Genius VideoCam V3 -zc3xx 0458:700f Genius VideoCam Web V2 -sonixj 0458:7025 Genius Eye 311Q -sn9c20x 0458:7029 Genius Look 320s -sonixj 0458:702e Genius Slim 310 NB -sn9c20x 0458:7045 Genius Look 1320 V2 -sn9c20x 0458:704a Genius Slim 1320 -sn9c20x 0458:704c Genius i-Look 1321 -sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650) -sonixj 045e:00f5 MicroSoft VX3000 -sonixj 045e:00f7 MicroSoft VX1000 -ov519 045e:028c Micro$oft xbox cam -spca508 0461:0815 Micro Innovation IC200 -sunplus 0461:0821 Fujifilm MV-1 -zc3xx 0461:0a00 MicroInnovation WebCam320 -stv06xx 046d:0840 QuickCam Express -stv06xx 046d:0850 LEGO cam / QuickCam Web -stv06xx 046d:0870 Dexxa WebCam USB -spca500 046d:0890 Logitech QuickCam traveler -vc032x 046d:0892 Logitech Orbicam -vc032x 046d:0896 Logitech Orbicam -vc032x 046d:0897 Logitech QuickCam for Dell notebooks -zc3xx 046d:089d Logitech QuickCam E2500 -zc3xx 046d:08a0 Logitech QC IM -zc3xx 046d:08a1 Logitech QC IM 0x08A1 +sound -zc3xx 046d:08a2 Labtec Webcam Pro -zc3xx 046d:08a3 Logitech QC Chat -zc3xx 046d:08a6 Logitech QCim -zc3xx 046d:08a7 Logitech QuickCam Image -zc3xx 046d:08a9 Logitech Notebook Deluxe -zc3xx 046d:08aa Labtec Webcam Notebook -zc3xx 046d:08ac Logitech QuickCam Cool -zc3xx 046d:08ad Logitech QCCommunicate STX -zc3xx 046d:08ae Logitech QuickCam for Notebooks -zc3xx 046d:08af Logitech QuickCam Cool -zc3xx 046d:08b9 Logitech QuickCam Express -zc3xx 046d:08d7 Logitech QCam STX -zc3xx 046d:08d9 Logitech QuickCam IM/Connect -zc3xx 046d:08d8 Logitech Notebook Deluxe -zc3xx 046d:08da Logitech QuickCam Messenger -zc3xx 046d:08dd Logitech QuickCam for Notebooks -spca500 046d:0900 Logitech Inc. ClickSmart 310 -spca500 046d:0901 Logitech Inc. ClickSmart 510 -sunplus 046d:0905 Logitech ClickSmart 820 -tv8532 046d:0920 Logitech QuickCam Express -tv8532 046d:0921 Labtec Webcam -spca561 046d:0928 Logitech QC Express Etch2 -spca561 046d:0929 Labtec Webcam Elch2 -spca561 046d:092a Logitech QC for Notebook -spca561 046d:092b Labtec Webcam Plus -spca561 046d:092c Logitech QC chat Elch2 -spca561 046d:092d Logitech QC Elch2 -spca561 046d:092e Logitech QC Elch2 -spca561 046d:092f Logitech QuickCam Express Plus -sunplus 046d:0960 Logitech ClickSmart 420 -nw80x 046d:d001 Logitech QuickCam Pro (dark focus ring) -sunplus 0471:0322 Philips DMVC1300K -zc3xx 0471:0325 Philips SPC 200 NC -zc3xx 0471:0326 Philips SPC 300 NC -sonixj 0471:0327 Philips SPC 600 NC -sonixj 0471:0328 Philips SPC 700 NC -zc3xx 0471:032d Philips SPC 210 NC -zc3xx 0471:032e Philips SPC 315 NC -sonixj 0471:0330 Philips SPC 710 NC -spca501 0497:c001 Smile International -sunplus 04a5:3003 Benq DC 1300 -sunplus 04a5:3008 Benq DC 1500 -sunplus 04a5:300a Benq DC 3410 -spca500 04a5:300c Benq DC 1016 -benq 04a5:3035 Benq DC E300 -finepix 04cb:0104 Fujifilm FinePix 4800 -finepix 04cb:0109 Fujifilm FinePix A202 -finepix 04cb:010b Fujifilm FinePix A203 -finepix 04cb:010f Fujifilm FinePix A204 -finepix 04cb:0111 Fujifilm FinePix A205 -finepix 04cb:0113 Fujifilm FinePix A210 -finepix 04cb:0115 Fujifilm FinePix A303 -finepix 04cb:0117 Fujifilm FinePix A310 -finepix 04cb:0119 Fujifilm FinePix F401 -finepix 04cb:011b Fujifilm FinePix F402 -finepix 04cb:011d Fujifilm FinePix F410 -finepix 04cb:0121 Fujifilm FinePix F601 -finepix 04cb:0123 Fujifilm FinePix F700 -finepix 04cb:0125 Fujifilm FinePix M603 -finepix 04cb:0127 Fujifilm FinePix S300 -finepix 04cb:0129 Fujifilm FinePix S304 -finepix 04cb:012b Fujifilm FinePix S500 -finepix 04cb:012d Fujifilm FinePix S602 -finepix 04cb:012f Fujifilm FinePix S700 -finepix 04cb:0131 Fujifilm FinePix unknown model -finepix 04cb:013b Fujifilm FinePix unknown model -finepix 04cb:013d Fujifilm FinePix unknown model -finepix 04cb:013f Fujifilm FinePix F420 -sunplus 04f1:1001 JVC GC A50 -spca561 04fc:0561 Flexcam 100 -spca1528 04fc:1528 Sunplus MD80 clone -sunplus 04fc:500c Sunplus CA500C -sunplus 04fc:504a Aiptek Mini PenCam 1.3 -sunplus 04fc:504b Maxell MaxPocket LE 1.3 -sunplus 04fc:5330 Digitrex 2110 -sunplus 04fc:5360 Sunplus Generic -spca500 04fc:7333 PalmPixDC85 -sunplus 04fc:ffff Pure DigitalDakota -nw80x 0502:d001 DVC V6 -spca501 0506:00df 3Com HomeConnect Lite -sunplus 052b:1507 Megapixel 5 Pretec DC-1007 -sunplus 052b:1513 Megapix V4 -sunplus 052b:1803 MegaImage VI -nw80x 052b:d001 EZCam Pro p35u -tv8532 0545:808b Veo Stingray -tv8532 0545:8333 Veo Stingray -sunplus 0546:3155 Polaroid PDC3070 -sunplus 0546:3191 Polaroid Ion 80 -sunplus 0546:3273 Polaroid PDC2030 -ov519 054c:0154 Sonny toy4 -ov519 054c:0155 Sonny toy5 -cpia1 0553:0002 CPIA CPiA (version1) based cameras -zc3xx 055f:c005 Mustek Wcam300A -spca500 055f:c200 Mustek Gsmart 300 -sunplus 055f:c211 Kowa Bs888e Microcamera -spca500 055f:c220 Gsmart Mini -sunplus 055f:c230 Mustek Digicam 330K -sunplus 055f:c232 Mustek MDC3500 -sunplus 055f:c360 Mustek DV4000 Mpeg4 -sunplus 055f:c420 Mustek gSmart Mini 2 -sunplus 055f:c430 Mustek Gsmart LCD 2 -sunplus 055f:c440 Mustek DV 3000 -sunplus 055f:c520 Mustek gSmart Mini 3 -sunplus 055f:c530 Mustek Gsmart LCD 3 -sunplus 055f:c540 Gsmart D30 -sunplus 055f:c630 Mustek MDC4000 -sunplus 055f:c650 Mustek MDC5500Z -nw80x 055f:d001 Mustek Wcam 300 mini -zc3xx 055f:d003 Mustek WCam300A -zc3xx 055f:d004 Mustek WCam300 AN -conex 0572:0041 Creative Notebook cx11646 -ov519 05a9:0511 Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera -ov519 05a9:0518 Creative WebCam -ov519 05a9:0519 OV519 Microphone -ov519 05a9:0530 OmniVision -ov534_9 05a9:1550 OmniVision VEHO Filmscanner -ov519 05a9:2800 OmniVision SuperCAM -ov519 05a9:4519 Webcam Classic -ov534_9 05a9:8065 OmniVision test kit ov538+ov9712 -ov519 05a9:8519 OmniVision -ov519 05a9:a511 D-Link USB Digital Video Camera -ov519 05a9:a518 D-Link DSB-C310 Webcam -sunplus 05da:1018 Digital Dream Enigma 1.3 -stk014 05e1:0893 Syntek DV4000 -gl860 05e3:0503 Genesys Logic PC Camera -gl860 05e3:f191 Genesys Logic PC Camera -spca561 060b:a001 Maxell Compact Pc PM3 -zc3xx 0698:2003 CTX M730V built in -topro 06a2:0003 TP6800 PC Camera, CmoX CX0342 webcam -topro 06a2:6810 Creative Qmax -nw80x 06a5:0000 Typhoon Webcam 100 USB -nw80x 06a5:d001 Divio based webcams -nw80x 06a5:d800 Divio Chicony TwinkleCam, Trust SpaceCam -spca500 06bd:0404 Agfa CL20 -spca500 06be:0800 Optimedia -nw80x 06be:d001 EZCam Pro p35u -sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom -spca506 06e1:a190 ADS Instant VCD -ov534 06f8:3002 Hercules Blog Webcam -ov534_9 06f8:3003 Hercules Dualpix HD Weblog -sonixj 06f8:3004 Hercules Classic Silver -sonixj 06f8:3008 Hercules Deluxe Optical Glass -pac7302 06f8:3009 Hercules Classic Link -pac7302 06f8:301b Hercules Link -nw80x 0728:d001 AVerMedia Camguard -spca508 0733:0110 ViewQuest VQ110 -spca501 0733:0401 Intel Create and Share -spca501 0733:0402 ViewQuest M318B -spca505 0733:0430 Intel PC Camera Pro -sunplus 0733:1311 Digital Dream Epsilon 1.3 -sunplus 0733:1314 Mercury 2.1MEG Deluxe Classic Cam -sunplus 0733:2211 Jenoptik jdc 21 LCD -sunplus 0733:2221 Mercury Digital Pro 3.1p -sunplus 0733:3261 Concord 3045 spca536a -sunplus 0733:3281 Cyberpix S550V -spca506 0734:043b 3DeMon USB Capture aka -cpia1 0813:0001 QX3 camera -ov519 0813:0002 Dual Mode USB Camera Plus -spca500 084d:0003 D-Link DSC-350 -spca500 08ca:0103 Aiptek PocketDV -sunplus 08ca:0104 Aiptek PocketDVII 1.3 -sunplus 08ca:0106 Aiptek Pocket DV3100+ -mr97310a 08ca:0110 Trust Spyc@m 100 -mr97310a 08ca:0111 Aiptek PenCam VGA+ -sunplus 08ca:2008 Aiptek Mini PenCam 2 M -sunplus 08ca:2010 Aiptek PocketCam 3M -sunplus 08ca:2016 Aiptek PocketCam 2 Mega -sunplus 08ca:2018 Aiptek Pencam SD 2M -sunplus 08ca:2020 Aiptek Slim 3000F -sunplus 08ca:2022 Aiptek Slim 3200 -sunplus 08ca:2024 Aiptek DV3500 Mpeg4 -sunplus 08ca:2028 Aiptek PocketCam4M -sunplus 08ca:2040 Aiptek PocketDV4100M -sunplus 08ca:2042 Aiptek PocketDV5100 -sunplus 08ca:2050 Medion MD 41437 -sunplus 08ca:2060 Aiptek PocketDV5300 -tv8532 0923:010f ICM532 cams -mars 093a:050f Mars-Semi Pc-Camera -mr97310a 093a:010e All known CIF cams with this ID -mr97310a 093a:010f All known VGA cams with this ID -pac207 093a:2460 Qtec Webcam 100 -pac207 093a:2461 HP Webcam -pac207 093a:2463 Philips SPC 220 NC -pac207 093a:2464 Labtec Webcam 1200 -pac207 093a:2468 Webcam WB-1400T -pac207 093a:2470 Genius GF112 -pac207 093a:2471 Genius VideoCam ge111 -pac207 093a:2472 Genius VideoCam ge110 -pac207 093a:2474 Genius iLook 111 -pac207 093a:2476 Genius e-Messenger 112 -pac7311 093a:2600 PAC7311 Typhoon -pac7311 093a:2601 Philips SPC 610 NC -pac7311 093a:2603 Philips SPC 500 NC -pac7311 093a:2608 Trust WB-3300p -pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 -pac7311 093a:260f SnakeCam -pac7302 093a:2620 Apollo AC-905 -pac7302 093a:2621 PAC731x -pac7302 093a:2622 Genius Eye 312 -pac7302 093a:2624 PAC7302 -pac7302 093a:2625 Genius iSlim 310 -pac7302 093a:2626 Labtec 2200 -pac7302 093a:2627 Genius FaceCam 300 -pac7302 093a:2628 Genius iLook 300 -pac7302 093a:2629 Genious iSlim 300 -pac7302 093a:262a Webcam 300k -pac7302 093a:262c Philips SPC 230 NC -jl2005bcd 0979:0227 Various brands, 19 known cameras supported -jeilinj 0979:0280 Sakar 57379 -jeilinj 0979:0280 Sportscam DV15 -zc3xx 0ac8:0302 Z-star Vimicro zc0302 -vc032x 0ac8:0321 Vimicro generic vc0321 -vc032x 0ac8:0323 Vimicro Vc0323 -vc032x 0ac8:0328 A4Tech PK-130MG -zc3xx 0ac8:301b Z-Star zc301b -zc3xx 0ac8:303b Vimicro 0x303b -zc3xx 0ac8:305b Z-star Vimicro zc0305b -zc3xx 0ac8:307b PC Camera (ZS0211) -vc032x 0ac8:c001 Sony embedded vimicro -vc032x 0ac8:c002 Sony embedded vimicro -vc032x 0ac8:c301 Samsung Q1 Ultra Premium -spca508 0af9:0010 Hama USB Sightcam 100 -spca508 0af9:0011 Hama USB Sightcam 100 -ov519 0b62:0059 iBOT2 Webcam -sonixb 0c45:6001 Genius VideoCAM NB -sonixb 0c45:6005 Microdia Sweex Mini Webcam -sonixb 0c45:6007 Sonix sn9c101 + Tas5110D -sonixb 0c45:6009 spcaCam@120 -sonixb 0c45:600d spcaCam@120 -sonixb 0c45:6011 Microdia PC Camera (SN9C102) -sonixb 0c45:6019 Generic Sonix OV7630 -sonixb 0c45:6024 Generic Sonix Tas5130c -sonixb 0c45:6025 Xcam Shanga -sonixb 0c45:6028 Sonix Btc Pc380 -sonixb 0c45:6029 spcaCam@150 -sonixb 0c45:602c Generic Sonix OV7630 -sonixb 0c45:602d LIC-200 LG -sonixb 0c45:602e Genius VideoCam Messenger -sonixj 0c45:6040 Speed NVC 350K -sonixj 0c45:607c Sonix sn9c102p Hv7131R -sonixj 0c45:60c0 Sangha Sn535 -sonixj 0c45:60ce USB-PC-Camera-168 (TALK-5067) -sonixj 0c45:60ec SN9C105+MO4000 -sonixj 0c45:60fb Surfer NoName -sonixj 0c45:60fc LG-LIC300 -sonixj 0c45:60fe Microdia Audio -sonixj 0c45:6100 PC Camera (SN9C128) -sonixj 0c45:6102 PC Camera (SN9C128) -sonixj 0c45:610a PC Camera (SN9C128) -sonixj 0c45:610b PC Camera (SN9C128) -sonixj 0c45:610c PC Camera (SN9C128) -sonixj 0c45:610e PC Camera (SN9C128) -sonixj 0c45:6128 Microdia/Sonix SNP325 -sonixj 0c45:612a Avant Camera -sonixj 0c45:612b Speed-Link REFLECT2 -sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix -sonixj 0c45:6130 Sonix Pccam -sonixj 0c45:6138 Sn9c120 Mo4000 -sonixj 0c45:613a Microdia Sonix PC Camera -sonixj 0c45:613b Surfer SN-206 -sonixj 0c45:613c Sonix Pccam168 -sonixj 0c45:6142 Hama PC-Webcam AC-150 -sonixj 0c45:6143 Sonix Pccam168 -sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia -sonixj 0c45:614a Frontech E-Ccam (JIL-2225) -sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001) -sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111) -sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655) -sn9c20x 0c45:624c PC Camera (SN9C201 + MT9M112) -sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968) -sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650) -sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650) -sn9c20x 0c45:6253 PC Camera (SN9C201 + OV9650) -sn9c20x 0c45:6260 PC Camera (SN9C201 + OV7670) -sn9c20x 0c45:6270 PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112) -sn9c20x 0c45:627b PC Camera (SN9C201 + OV7660) -sn9c20x 0c45:627c PC Camera (SN9C201 + HV7131R) -sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650) -sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001) -sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111) -sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655) -sn9c20x 0c45:628c PC Camera (SN9C201 + MT9M112) -sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968) -sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650) -sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670) -sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112) -sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655) -sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660) -sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R) -sn9c2028 0c45:8001 Wild Planet Digital Spy Camera -sn9c2028 0c45:8003 Sakar #11199, #6637x, #67480 keychain cams -sn9c2028 0c45:8008 Mini-Shotz ms-350 -sn9c2028 0c45:800a Vivitar Vivicam 3350B -sunplus 0d64:0303 Sunplus FashionCam DXG -ov519 0e96:c001 TRUST 380 USB2 SPACEC@M -etoms 102c:6151 Qcam Sangha CIF -etoms 102c:6251 Qcam xxxxxx VGA -ov519 1046:9967 W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go -zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 -spca561 10fd:7e50 FlyCam Usb 100 -zc3xx 10fd:8050 Typhoon Webshot II USB 300k -ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201) -pac207 145f:013a Trust WB-1300N -sn9c20x 145f:013d Trust WB-3600R -vc032x 15b8:6001 HP 2.0 Megapixel -vc032x 15b8:6002 HP 2.0 Megapixel rz406aa -spca501 1776:501c Arowana 300K CMOS Camera -t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops -vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC -pac207 2001:f115 D-Link DSB-C120 -sq905c 2770:9050 Disney pix micro (CIF) -sq905c 2770:9051 Lego Bionicle -sq905c 2770:9052 Disney pix micro 2 (VGA) -sq905c 2770:905c All 11 known cameras with this ID -sq905 2770:9120 All 24 known cameras with this ID -sq905c 2770:913d All 4 known cameras with this ID -sq930x 2770:930b Sweex Motion Tracking / I-Tec iCam Tracer -sq930x 2770:930c Trust WB-3500T / NSG Robbie 2.0 -spca500 2899:012c Toptro Industrial -ov519 8020:ef04 ov519 -spca508 8086:0110 Intel Easy PC Camera -spca500 8086:0630 Intel Pocket PC Camera -spca506 99fa:8988 Grandtec V.cap -sn9c20x a168:0610 Dino-Lite Digital Microscope (SN9C201 + HV7131R) -sn9c20x a168:0611 Dino-Lite Digital Microscope (SN9C201 + HV7131R) -sn9c20x a168:0613 Dino-Lite Digital Microscope (SN9C201 + HV7131R) -sn9c20x a168:0618 Dino-Lite Digital Microscope (SN9C201 + HV7131R) -sn9c20x a168:0614 Dino-Lite Digital Microscope (SN9C201 + MT9M111) -sn9c20x a168:0615 Dino-Lite Digital Microscope (SN9C201 + MT9M111) -sn9c20x a168:0617 Dino-Lite Digital Microscope (SN9C201 + MT9M111) -spca561 abcd:cdee Petcam -========= ========= ==================================================================== +========= ========= =================================================================== +spca501 0000:0000 MystFromOri Unknown Camera +spca508 0130:0130 Clone Digital Webcam 11043 +se401 03e8:0004 Endpoints/AoxSE401 +zc3xx 03f0:1b07 HP Premium Starter Cam +m5602 0402:5602 ALi Video Camera Controller +spca501 040a:0002 Kodak DVC-325 +spca500 040a:0300 Kodak EZ200 +zc3xx 041e:041e Creative WebCam Live! +ov519 041e:4003 Video Blaster WebCam Go Plus +stv0680 041e:4007 Go Mini +spca500 041e:400a Creative PC-CAM 300 +sunplus 041e:400b Creative PC-CAM 600 +sunplus 041e:4012 PC-Cam350 +sunplus 041e:4013 Creative Pccam750 +zc3xx 041e:4017 Creative Webcam Mobile PD1090 +spca508 041e:4018 Creative Webcam Vista (PD1100) +spca561 041e:401a Creative Webcam Vista (PD1100) +zc3xx 041e:401c Creative NX +spca505 041e:401d Creative Webcam NX ULTRA +zc3xx 041e:401e Creative Nx Pro +zc3xx 041e:401f Creative Webcam Notebook PD1171 +zc3xx 041e:4022 Webcam NX Pro +pac207 041e:4028 Creative Webcam Vista Plus +zc3xx 041e:4029 Creative WebCam Vista Pro +zc3xx 041e:4034 Creative Instant P0620 +zc3xx 041e:4035 Creative Instant P0620D +zc3xx 041e:4036 Creative Live ! +sq930x 041e:4038 Creative Joy-IT +zc3xx 041e:403a Creative Nx Pro 2 +spca561 041e:403b Creative Webcam Vista (VF0010) +sq930x 041e:403c Creative Live! Ultra +sq930x 041e:403d Creative Live! Ultra for Notebooks +sq930x 041e:4041 Creative Live! Motion +zc3xx 041e:4051 Creative Live!Cam Notebook Pro (VF0250) +ov519 041e:4052 Creative Live! VISTA IM +zc3xx 041e:4053 Creative Live!Cam Video IM +vc032x 041e:405b Creative Live! Cam Notebook Ultra (VC0130) +ov519 041e:405f Creative Live! VISTA VF0330 +ov519 041e:4060 Creative Live! VISTA VF0350 +ov519 041e:4061 Creative Live! VISTA VF0400 +ov519 041e:4064 Creative Live! VISTA VF0420 +ov519 041e:4067 Creative Live! Cam Video IM (VF0350) +ov519 041e:4068 Creative Live! VISTA VF0470 +sn9c2028 0458:7003 GeniusVideocam Live v2 +spca561 0458:7004 Genius VideoCAM Express V2 +sn9c2028 0458:7005 Genius Smart 300, version 2 +sunplus 0458:7006 Genius Dsc 1.3 Smart +zc3xx 0458:7007 Genius VideoCam V2 +zc3xx 0458:700c Genius VideoCam V3 +zc3xx 0458:700f Genius VideoCam Web V2 +sonixj 0458:7025 Genius Eye 311Q +sn9c20x 0458:7029 Genius Look 320s +sonixj 0458:702e Genius Slim 310 NB +sn9c20x 0458:7045 Genius Look 1320 V2 +sn9c20x 0458:704a Genius Slim 1320 +sn9c20x 0458:704c Genius i-Look 1321 +sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650) +sonixj 045e:00f5 MicroSoft VX3000 +sonixj 045e:00f7 MicroSoft VX1000 +ov519 045e:028c Micro$oft xbox cam +kinect 045e:02ae Xbox NUI Camera +kinect 045e:02bf Kinect for Windows NUI Camera +spca561 0461:0815 Micro Innovations IC200 Webcam +sunplus 0461:0821 Fujifilm MV-1 +zc3xx 0461:0a00 MicroInnovation WebCam320 +stv06xx 046D:08F0 QuickCamMessenger +stv06xx 046D:08F5 QuickCamCommunicate +stv06xx 046D:08F6 QuickCamMessenger (new) +stv06xx 046d:0840 QuickCamExpress +stv06xx 046d:0850 LEGOcam / QuickCam Web +stv06xx 046d:0870 DexxaWebCam USB +spca500 046d:0890 Logitech QuickCam traveler +vc032x 046d:0892 Logitech Orbicam +vc032x 046d:0896 Logitech Orbicam +vc032x 046d:0897 Logitech QuickCam for Dell notebooks +zc3xx 046d:089d Logitech QuickCam E2500 +zc3xx 046d:08a0 Logitech QC IM +zc3xx 046d:08a1 Logitech QC IM 0x08A1 +sound +zc3xx 046d:08a2 Labtec Webcam Pro +zc3xx 046d:08a3 Logitech QC Chat +zc3xx 046d:08a6 Logitech QCim +zc3xx 046d:08a7 Logitech QuickCam Image +zc3xx 046d:08a9 Logitech Notebook Deluxe +zc3xx 046d:08aa Labtec Webcam Notebook +zc3xx 046d:08ac Logitech QuickCam Cool +zc3xx 046d:08ad Logitech QCCommunicate STX +zc3xx 046d:08ae Logitech QuickCam for Notebooks +zc3xx 046d:08af Logitech QuickCam Cool +zc3xx 046d:08b9 Logitech QuickCam Express +zc3xx 046d:08d7 Logitech QCam STX +zc3xx 046d:08d8 Logitech Notebook Deluxe +zc3xx 046d:08d9 Logitech QuickCam IM/Connect +zc3xx 046d:08da Logitech QuickCam Messenger +zc3xx 046d:08dd Logitech QuickCam for Notebooks +spca500 046d:0900 Logitech Inc. ClickSmart 310 +spca500 046d:0901 Logitech Inc. ClickSmart 510 +sunplus 046d:0905 Logitech ClickSmart 820 +tv8532 046d:0920 Logitech QuickCam Express +tv8532 046d:0921 Labtec Webcam +spca561 046d:0928 Logitech QC Express Etch2 +spca561 046d:0929 Labtec Webcam Elch2 +spca561 046d:092a Logitech QC for Notebook +spca561 046d:092b Labtec Webcam Plus +spca561 046d:092c Logitech QC chat Elch2 +spca561 046d:092d Logitech QC Elch2 +spca561 046d:092e Logitech QC Elch2 +spca561 046d:092f Logitech QuickCam Express Plus +sunplus 046d:0960 Logitech ClickSmart 420 +nw80x 046d:d001 Logitech QuickCam Pro (dark focus ring) +se401 0471:030b PhilipsPCVC665K +sunplus 0471:0322 Philips DMVC1300K +zc3xx 0471:0325 Philips SPC 200 NC +zc3xx 0471:0326 Philips SPC 300 NC +sonixj 0471:0327 Philips SPC 600 NC +sonixj 0471:0328 Philips SPC 700 NC +zc3xx 0471:032d Philips SPC 210 NC +zc3xx 0471:032e Philips SPC 315 NC +sonixj 0471:0330 Philips SPC 710 NC +se401 047d:5001 Kensington67014 +se401 047d:5002 Kensington6701(5/7) +se401 047d:5003 Kensington67016 +spca501 0497:c001 Smile International +sunplus 04a5:3003 Benq DC 1300 +sunplus 04a5:3008 Benq DC 1500 +sunplus 04a5:300a Benq DC 3410 +spca500 04a5:300c Benq DC 1016 +benq 04a5:3035 Benq DC E300 +vicam 04c1:009d HomeConnect Webcam [vicam] +konica 04c8:0720 IntelYC 76 +finepix 04cb:0104 Fujifilm FinePix 4800 +finepix 04cb:0109 Fujifilm FinePix A202 +finepix 04cb:010b Fujifilm FinePix A203 +finepix 04cb:010f Fujifilm FinePix A204 +finepix 04cb:0111 Fujifilm FinePix A205 +finepix 04cb:0113 Fujifilm FinePix A210 +finepix 04cb:0115 Fujifilm FinePix A303 +finepix 04cb:0117 Fujifilm FinePix A310 +finepix 04cb:0119 Fujifilm FinePix F401 +finepix 04cb:011b Fujifilm FinePix F402 +finepix 04cb:011d Fujifilm FinePix F410 +finepix 04cb:0121 Fujifilm FinePix F601 +finepix 04cb:0123 Fujifilm FinePix F700 +finepix 04cb:0125 Fujifilm FinePix M603 +finepix 04cb:0127 Fujifilm FinePix S300 +finepix 04cb:0129 Fujifilm FinePix S304 +finepix 04cb:012b Fujifilm FinePix S500 +finepix 04cb:012d Fujifilm FinePix S602 +finepix 04cb:012f Fujifilm FinePix S700 +finepix 04cb:0131 Fujifilm FinePix unknown model +finepix 04cb:013b Fujifilm FinePix unknown model +finepix 04cb:013d Fujifilm FinePix unknown model +finepix 04cb:013f Fujifilm FinePix F420 +sunplus 04f1:1001 JVC GC A50 +spca561 04fc:0561 Flexcam 100 +spca1528 04fc:1528 Sunplus MD80 clone +sunplus 04fc:500c Sunplus CA500C +sunplus 04fc:504a Aiptek Mini PenCam 1.3 +sunplus 04fc:504b Maxell MaxPocket LE 1.3 +sunplus 04fc:5330 Digitrex 2110 +sunplus 04fc:5360 Sunplus Generic +spca500 04fc:7333 PalmPixDC85 +sunplus 04fc:ffff Pure DigitalDakota +nw80x 0502:d001 DVC V6 +spca501 0506:00df 3Com HomeConnect Lite +sunplus 052b:1507 Megapixel 5 Pretec DC-1007 +sunplus 052b:1513 Megapix V4 +sunplus 052b:1803 MegaImage VI +nw80x 052b:d001 EZCam Pro p35u +tv8532 0545:808b Veo Stingray +tv8532 0545:8333 Veo Stingray +sunplus 0546:3155 Polaroid PDC3070 +sunplus 0546:3191 Polaroid Ion 80 +sunplus 0546:3273 Polaroid PDC2030 +touptek 0547:6801 TTUCMOS08000KPB, AS MU800 +dtcs033 0547:7303 Anchor Chips, Inc +ov519 054c:0154 Sonny toy4 +ov519 054c:0155 Sonny toy5 +cpia1 0553:0002 CPIA CPiA (version1) based cameras +stv0680 0553:0202 STV0680 Camera +zc3xx 055f:c005 Mustek Wcam300A +spca500 055f:c200 Mustek Gsmart 300 +sunplus 055f:c211 Kowa Bs888e Microcamera +spca500 055f:c220 Gsmart Mini +sunplus 055f:c230 Mustek Digicam 330K +sunplus 055f:c232 Mustek MDC3500 +sunplus 055f:c360 Mustek DV4000 Mpeg4 +sunplus 055f:c420 Mustek gSmart Mini 2 +sunplus 055f:c430 Mustek Gsmart LCD 2 +sunplus 055f:c440 Mustek DV 3000 +sunplus 055f:c520 Mustek gSmart Mini 3 +sunplus 055f:c530 Mustek Gsmart LCD 3 +sunplus 055f:c540 Gsmart D30 +sunplus 055f:c630 Mustek MDC4000 +sunplus 055f:c650 Mustek MDC5500Z +nw80x 055f:d001 Mustek Wcam 300 mini +zc3xx 055f:d003 Mustek WCam300A +zc3xx 055f:d004 Mustek WCam300 AN +conex 0572:0041 Creative Notebook cx11646 +ov519 05a9:0511 Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera +ov519 05a9:0518 Creative WebCam +ov519 05a9:0519 OV519 Microphone +ov519 05a9:0530 OmniVision +ov534_9 05a9:1550 OmniVision VEHO Filmscanner +ov519 05a9:2800 OmniVision SuperCAM +ov519 05a9:4519 Webcam Classic +ov534_9 05a9:8065 OmniVision test kit ov538+ov9712 +ov519 05a9:8519 OmniVision +ov519 05a9:a511 D-Link USB Digital Video Camera +ov519 05a9:a518 D-Link DSB-C310 Webcam +sunplus 05da:1018 Digital Dream Enigma 1.3 +stk014 05e1:0893 Syntek DV4000 +gl860 05e3:0503 Genesys Logic PC Camera +gl860 05e3:f191 Genesys Logic PC Camera +vicam 0602:1001 ViCam Webcam +spca561 060b:a001 Maxell Compact Pc PM3 +zc3xx 0698:2003 CTX M730V built in +topro 06a2:0003 TP6800 PC Camera, CmoX CX0342 webcam +topro 06a2:6810 Creative Qmax +nw80x 06a5:0000 Typhoon Webcam 100 USB +nw80x 06a5:d001 Divio based webcams +nw80x 06a5:d800 Divio Chicony TwinkleCam, Trust SpaceCam +spca500 06bd:0404 Agfa CL20 +spca500 06be:0800 Optimedia +nw80x 06be:d001 EZCam Pro p35u +sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom +sunplus 06d6:0041 Aashima Technology B.V. +spca506 06e1:a190 ADS Instant VCD +ov534 06f8:3002 Hercules Blog Webcam +ov534_9 06f8:3003 Hercules Dualpix HD Weblog +sonixj 06f8:3004 Hercules Classic Silver +sonixj 06f8:3008 Hercules Deluxe Optical Glass +pac7302 06f8:3009 Hercules Classic Link +pac7302 06f8:301b Hercules Link +nw80x 0728:d001 AVerMedia Camguard +spca508 0733:0110 ViewQuest VQ110 +spca501 0733:0401 Intel Create and Share +spca501 0733:0402 ViewQuest M318B +spca505 0733:0430 Intel PC Camera Pro +sunplus 0733:1311 Digital Dream Epsilon 1.3 +sunplus 0733:1314 Mercury 2.1MEG Deluxe Classic Cam +sunplus 0733:2211 Jenoptik jdc 21 LCD +sunplus 0733:2221 Mercury Digital Pro 3.1p +sunplus 0733:3261 Concord 3045 spca536a +sunplus 0733:3281 Cyberpix S550V +spca506 0734:043b 3DeMon USB Capture aka +cpia1 0813:0001 QX3 camera +ov519 0813:0002 Dual Mode USB Camera Plus +spca500 084d:0003 D-Link DSC-350 +spca500 08ca:0103 Aiptek PocketDV +sunplus 08ca:0104 Aiptek PocketDVII 1.3 +sunplus 08ca:0106 Aiptek Pocket DV3100+ +mr97310a 08ca:0110 Trust Spyc@m 100 +mr97310a 08ca:0111 Aiptek PenCam VGA+ +sunplus 08ca:2008 Aiptek Mini PenCam 2 M +sunplus 08ca:2010 Aiptek PocketCam 3M +sunplus 08ca:2016 Aiptek PocketCam 2 Mega +sunplus 08ca:2018 Aiptek Pencam SD 2M +sunplus 08ca:2020 Aiptek Slim 3000F +sunplus 08ca:2022 Aiptek Slim 3200 +sunplus 08ca:2024 Aiptek DV3500 Mpeg4 +sunplus 08ca:2028 Aiptek PocketCam4M +sunplus 08ca:2040 Aiptek PocketDV4100M +sunplus 08ca:2042 Aiptek PocketDV5100 +sunplus 08ca:2050 Medion MD 41437 +sunplus 08ca:2060 Aiptek PocketDV5300 +tv8532 0923:010f ICM532 cams +mr97310a 093a:010e All known CIF cams with this ID +mr97310a 093a:010f All known VGA cams with this ID +mars 093a:050f Mars-Semi Pc-Camera +pac207 093a:2460 Qtec Webcam 100 +pac207 093a:2461 HP Webcam +pac207 093a:2463 Philips SPC 220 NC +pac207 093a:2464 Labtec Webcam 1200 +pac207 093a:2468 Webcam WB-1400T +pac207 093a:2470 Genius GF112 +pac207 093a:2471 Genius VideoCam ge111 +pac207 093a:2472 Genius VideoCam ge110 +pac207 093a:2474 Genius iLook 111 +pac207 093a:2476 Genius e-Messenger 112 +pac7311 093a:2600 PAC7311 Typhoon +pac7311 093a:2601 Philips SPC 610 NC +pac7311 093a:2603 Philips SPC 500 NC +pac7311 093a:2608 Trust WB-3300p +pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 +pac7311 093a:260f SnakeCam +pac7302 093a:2620 Apollo AC-905 +pac7302 093a:2621 PAC731x +pac7302 093a:2622 Genius Eye 312 +pac7302 093a:2623 Pixart Imaging, Inc. +pac7302 093a:2624 PAC7302 +pac7302 093a:2625 Genius iSlim 310 +pac7302 093a:2626 Labtec 2200 +pac7302 093a:2627 Genius FaceCam 300 +pac7302 093a:2628 Genius iLook 300 +pac7302 093a:2629 Genious iSlim 300 +pac7302 093a:262a Webcam 300k +pac7302 093a:262c Philips SPC 230 NC +jl2005bcd 0979:0227 Various brands, 19 known cameras supported +jeilinj 0979:0270 Sakar 57379 +jeilinj 0979:0280 Sportscam DV15, Sakar 57379 +zc3xx 0ac8:0301 Web Camera +zc3xx 0ac8:0302 Z-star Vimicro zc0302 +vc032x 0ac8:0321 Vimicro generic vc0321 +vc032x 0ac8:0323 Vimicro Vc0323 +vc032x 0ac8:0328 A4Tech PK-130MG +zc3xx 0ac8:301b Z-Star zc301b +zc3xx 0ac8:303b Vimicro 0x303b +zc3xx 0ac8:305b Z-star Vimicro zc0305b +zc3xx 0ac8:307b PC Camera (ZS0211) +vc032x 0ac8:c001 Sony embedded vimicro +vc032x 0ac8:c002 Sony embedded vimicro +vc032x 0ac8:c301 Samsung Q1 Ultra Premium +spca508 0af9:0010 Hama USB Sightcam 100 +spca508 0af9:0011 Hama USB Sightcam 100 +ov519 0b62:0059 iBOT2 Webcam +sonixb 0c45:6001 Genius VideoCAM NB +sonixb 0c45:6005 Microdia Sweex Mini Webcam +sonixb 0c45:6007 Sonix sn9c101 + Tas5110D +sonixb 0c45:6009 spcaCam@120 +sonixb 0c45:600d spcaCam@120 +sonixb 0c45:6011 Microdia PC Camera (SN9C102) +sonixb 0c45:6019 Generic Sonix OV7630 +sonixb 0c45:6024 Generic Sonix Tas5130c +sonixb 0c45:6025 Xcam Shanga +sonixb 0c45:6027 GeniusEye 310 +sonixb 0c45:6028 Sonix Btc Pc380 +sonixb 0c45:6029 spcaCam@150 +sonixb 0c45:602a Meade ETX-105EC Camera +sonixb 0c45:602c Generic Sonix OV7630 +sonixb 0c45:602d LIC-200 LG +sonixb 0c45:602e Genius VideoCam Messenger +sonixj 0c45:6040 Speed NVC 350K +sonixj 0c45:607c Sonix sn9c102p Hv7131R +sonixb 0c45:6083 VideoCAM Look +sonixb 0c45:608c VideoCAM Look +sonixb 0c45:608f PC Camera (SN9C103 + OV7630) +sonixb 0c45:60a8 VideoCAM Look +sonixb 0c45:60aa VideoCAM Look +sonixb 0c45:60af VideoCAM Look +sonixb 0c45:60b0 Genius VideoCam Look +sonixj 0c45:60c0 Sangha Sn535 +sonixj 0c45:60ce USB-PC-Camera-168 (TALK-5067) +sonixj 0c45:60ec SN9C105+MO4000 +sonixj 0c45:60fb Surfer NoName +sonixj 0c45:60fc LG-LIC300 +sonixj 0c45:60fe Microdia Audio +sonixj 0c45:6100 PC Camera (SN9C128) +sonixj 0c45:6102 PC Camera (SN9C128) +sonixj 0c45:610a PC Camera (SN9C128) +sonixj 0c45:610b PC Camera (SN9C128) +sonixj 0c45:610c PC Camera (SN9C128) +sonixj 0c45:610e PC Camera (SN9C128) +sonixj 0c45:6128 Microdia/Sonix SNP325 +sonixj 0c45:612a Avant Camera +sonixj 0c45:612b Speed-Link REFLECT2 +sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix +sonixj 0c45:612e PC Camera (SN9C110) +sonixj 0c45:6130 Sonix Pccam +sonixj 0c45:6138 Sn9c120 Mo4000 +sonixj 0c45:613a Microdia Sonix PC Camera +sonixj 0c45:613b Surfer SN-206 +sonixj 0c45:613c Sonix Pccam168 +sonixj 0c45:613e PC Camera (SN9C120) +sonixj 0c45:6142 Hama PC-Webcam AC-150 +sonixj 0c45:6143 Sonix Pccam168 +sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia +sonixj 0c45:614a Frontech E-Ccam (JIL-2225) +sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001) +sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111) +sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655) +sn9c20x 0c45:624c PC Camera (SN9C201 + MT9M112) +sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968) +sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6253 PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6260 PC Camera (SN9C201 + OV7670) +sn9c20x 0c45:6270 PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112) +sn9c20x 0c45:627b PC Camera (SN9C201 + OV7660) +sn9c20x 0c45:627c PC Camera (SN9C201 + HV7131R) +sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650) +sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001) +sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111) +sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655) +sn9c20x 0c45:628c PC Camera (SN9C201 + MT9M112) +sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968) +sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650) +sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670) +sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112) +sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655) +sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660) +sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R) +sn9c2028 0c45:8001 Wild Planet Digital Spy Camera +sn9c2028 0c45:8003 Sakar #11199, #6637x, #67480 keychain cams +sn9c2028 0c45:8008 Mini-Shotz ms-350 +sn9c2028 0c45:800a Vivitar Vivicam 3350B +sunplus 0d64:0303 Sunplus FashionCam DXG +ov519 0e96:c001 TRUST 380 USB2 SPACEC@M +etoms 102c:6151 Qcam Sangha CIF +etoms 102c:6251 Qcam xxxxxx VGA +ov519 1046:9967 W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go +zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 +spca561 10fd:7e50 FlyCam Usb 100 +zc3xx 10fd:804d Typhoon Webshot II Webcam [zc0301] +zc3xx 10fd:8050 Typhoon Webshot II USB 300k +ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201) +pac207 145f:013a Trust WB-1300N +pac7302 145f:013c Trust +sn9c20x 145f:013d Trust WB-3600R +vc032x 15b8:6001 HP 2.0 Megapixel +vc032x 15b8:6002 HP 2.0 Megapixel rz406aa +stk1135 174f:6a31 ASUSlaptop, MT9M112 sensor +spca501 1776:501c Arowana 300K CMOS Camera +t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops +vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC +pac7302 1ae7:2001 SpeedLinkSnappy Mic SL-6825-SBK +pac207 2001:f115 D-Link DSB-C120 +sq905c 2770:9050 Disney pix micro (CIF) +sq905c 2770:9051 Lego Bionicle +sq905c 2770:9052 Disney pix micro 2 (VGA) +sq905c 2770:905c All 11 known cameras with this ID +sq905 2770:9120 All 24 known cameras with this ID +sq905c 2770:913d All 4 known cameras with this ID +sq930x 2770:930b Sweex Motion Tracking / I-Tec iCam Tracer +sq930x 2770:930c Trust WB-3500T / NSG Robbie 2.0 +spca500 2899:012c Toptro Industrial +ov519 8020:ef04 ov519 +spca508 8086:0110 Intel Easy PC Camera +spca500 8086:0630 Intel Pocket PC Camera +spca506 99fa:8988 Grandtec V.cap +sn9c20x a168:0610 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0611 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0613 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +sn9c20x a168:0614 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0615 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0617 Dino-Lite Digital Microscope (SN9C201 + MT9M111) +sn9c20x a168:0618 Dino-Lite Digital Microscope (SN9C201 + HV7131R) +spca561 abcd:cdee Petcam +========= ========= =================================================================== diff --git a/Documentation/media/v4l-drivers/index.rst b/Documentation/media/v4l-drivers/index.rst index aac566f88833..a606d1cdac13 100644 --- a/Documentation/media/v4l-drivers/index.rst +++ b/Documentation/media/v4l-drivers/index.rst @@ -2,6 +2,8 @@ .. include:: <isonum.txt> +.. _v4l-drivers: + ################################################ Video4Linux (V4L) driver-specific documentation ################################################ @@ -46,6 +48,7 @@ For more details see the file COPYING in the source distribution of Linux. pvrusb2 pxa_camera radiotrack + rcar-fdp1 saa7134 sh_mobile_ceu_camera si470x diff --git a/Documentation/media/v4l-drivers/ivtv-cardlist.rst b/Documentation/media/v4l-drivers/ivtv-cardlist.rst index cd7e79d2963e..754ffa820b4c 100644 --- a/Documentation/media/v4l-drivers/ivtv-cardlist.rst +++ b/Documentation/media/v4l-drivers/ivtv-cardlist.rst @@ -1,29 +1,38 @@ IVTV cards list =============== -.. code-block:: none - - 1 -> Hauppauge WinTV PVR-250 - 2 -> Hauppauge WinTV PVR-350 - 3 -> Hauppauge WinTV PVR-150 or PVR-500 - 4 -> AVerMedia M179 [1461:a3ce,1461:a3cf] - 5 -> Yuan MPG600/Kuroutoshikou iTVC16-STVLP [12ab:fff3,12ab:ffff] - 6 -> Yuan MPG160/Kuroutoshikou iTVC15-STVLP [12ab:0000,10fc:40a0] - 7 -> Yuan PG600/DiamondMM PVR-550 [ff92:0070,ffab:0600] - 8 -> Adaptec AVC-2410 [9005:0093] - 9 -> Adaptec AVC-2010 [9005:0092] - 10 -> NAGASE TRANSGEAR 5000TV [1461:bfff] - 11 -> AOpen VA2000MAX-STN6 [0000:ff5f] - 12 -> YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP [12ab:0600,fbab:0600,1154:0523] - 13 -> I/O Data GV-MVP/RX [10fc:d01e,10fc:d038,10fc:d039] - 14 -> I/O Data GV-MVP/RX2E [10fc:d025] - 15 -> GOTVIEW PCI DVD (partial support only) [12ab:0600] - 16 -> GOTVIEW PCI DVD2 Deluxe [ffac:0600] - 17 -> Yuan MPC622 [ff01:d998] - 18 -> Digital Cowboy DCT-MTVP1 [1461:bfff] - 19 -> Yuan PG600V2/GotView PCI DVD Lite [ffab:0600,ffad:0600] - 20 -> Club3D ZAP-TV1x01 [ffab:0600] - 21 -> AverTV MCE 116 Plus [1461:c439] - 22 -> ASUS Falcon2 [1043:4b66,1043:462e,1043:4b2e] - 23 -> AverMedia PVR-150 Plus [1461:c035] - 24 -> AverMedia EZMaker PCI Deluxe [1461:c03f] +=========== ============================================================= ==================================================== +Card number Card name PCI IDs +=========== ============================================================= ==================================================== +0 Hauppauge WinTV PVR-250 IVTV16 104d:813d +1 Hauppauge WinTV PVR-350 IVTV16 104d:813d +2 Hauppauge WinTV PVR-150 IVTV16 104d:813d +3 AVerMedia M179 IVTV15 1461:a3cf, IVTV15 1461:a3ce +4 Yuan MPG600, Kuroutoshikou ITVC16-STVLP IVTV16 12ab:fff3, IVTV16 12ab:ffff +5 YUAN MPG160, Kuroutoshikou ITVC15-STVLP, I/O Data GV-M2TV/PCI IVTV15 10fc:40a0 +6 Yuan PG600, Diamond PVR-550 IVTV16 ff92:0070, IVTV16 ffab:0600 +7 Adaptec VideOh! AVC-2410 IVTV16 9005:0093 +8 Adaptec VideOh! AVC-2010 IVTV16 9005:0092 +9 Nagase Transgear 5000TV IVTV16 1461:bfff +10 AOpen VA2000MAX-SNT6 IVTV16 0000:ff5f +11 Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP IVTV16 12ab:0600, IVTV16 fbab:0600, IVTV16 1154:0523 +12 I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) IVTV16 10fc:d01e, IVTV16 10fc:d038, IVTV16 10fc:d039 +13 I/O Data GV-MVP/RX2E IVTV16 10fc:d025 +14 GotView PCI DVD IVTV16 12ab:0600 +15 GotView PCI DVD2 Deluxe IVTV16 ffac:0600 +16 Yuan MPC622 IVTV16 ff01:d998 +17 Digital Cowboy DCT-MTVP1 IVTV16 1461:bfff +18 Yuan PG600-2, GotView PCI DVD Lite IVTV16 ffab:0600, IVTV16 ffad:0600 +19 Club3D ZAP-TV1x01 IVTV16 ffab:0600 +20 AVerTV MCE 116 Plus IVTV16 1461:c439 +21 ASUS Falcon2 IVTV16 1043:4b66, IVTV16 1043:462e, IVTV16 1043:4b2e +22 AVerMedia PVR-150 Plus / AVerTV M113 Partsnic (Daewoo) Tuner IVTV16 1461:c034, IVTV16 1461:c035 +23 AVerMedia EZMaker PCI Deluxe IVTV16 1461:c03f +24 AVerMedia M104 IVTV16 1461:c136 +25 Buffalo PC-MV5L/PCI IVTV16 1154:052b +26 AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner IVTV16 1461:c019, IVTV16 1461:c01b +27 Sony VAIO Giga Pocket (ENX Kikyou) IVTV16 104d:813d +28 Hauppauge WinTV PVR-350 (V1) IVTV16 104d:813d +29 Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR) IVTV16 104d:813d +30 Yuan MPG600GR, Kuroutoshikou CX23416GYC-STVLP (no GR/YCS) IVTV16 104d:813d +=========== ============================================================= ==================================================== diff --git a/Documentation/media/v4l-drivers/rcar-fdp1.rst b/Documentation/media/v4l-drivers/rcar-fdp1.rst new file mode 100644 index 000000000000..a59b1e8e3e9c --- /dev/null +++ b/Documentation/media/v4l-drivers/rcar-fdp1.rst @@ -0,0 +1,37 @@ +Renesas R-Car Fine Display Processor (FDP1) Driver +================================================== + +The R-Car FDP1 driver implements driver-specific controls as follows. + +``V4L2_CID_DEINTERLACING_MODE (menu)`` + The video deinterlacing mode (such as Bob, Weave, ...). The R-Car FDP1 + driver implements the following modes. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 4 + + * - ``"Progressive" (0)`` + - The input image video stream is progressive (not interlaced). No + deinterlacing is performed. Apart from (optional) format and encoding + conversion output frames are identical to the input frames. + * - ``"Adaptive 2D/3D" (1)`` + - Motion adaptive version of 2D and 3D deinterlacing. Use 3D deinterlacing + in the presence of fast motion and 2D deinterlacing with diagonal + interpolation otherwise. + * - ``"Fixed 2D" (2)`` + - The current field is scaled vertically by averaging adjacent lines to + recover missing lines. This method is also known as blending or Line + Averaging (LAV). + * - ``"Fixed 3D" (3)`` + - The previous and next fields are averaged to recover lines missing from + the current field. This method is also known as Field Averaging (FAV). + * - ``"Previous field" (4)`` + - The current field is weaved with the previous field, i.e. the previous + field is used to fill missing lines from the current field. This method + is also known as weave deinterlacing. + * - ``"Next field" (5)`` + - The current field is weaved with the next field, i.e. the next field is + used to fill missing lines from the current field. This method is also + known as weave deinterlacing. diff --git a/Documentation/media/v4l-drivers/saa7134-cardlist.rst b/Documentation/media/v4l-drivers/saa7134-cardlist.rst index 22c1510d9fa6..a5efa8f4b8e4 100644 --- a/Documentation/media/v4l-drivers/saa7134-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7134-cardlist.rst @@ -1,202 +1,204 @@ SAA7134 cards list ================== -.. code-block:: none - - 0 -> UNKNOWN/GENERIC - 1 -> Proteus Pro [philips reference design] [1131:2001,1131:2001] - 2 -> LifeView FlyVIDEO3000 [5168:0138,4e42:0138] - 3 -> LifeView/Typhoon FlyVIDEO2000 [5168:0138,4e42:0138] - 4 -> EMPRESS [1131:6752] - 5 -> SKNet Monster TV [1131:4e85] - 6 -> Tevion MD 9717 - 7 -> KNC One TV-Station RDS / Typhoon TV Tuner RDS [1131:fe01,1894:fe01] - 8 -> Terratec Cinergy 400 TV [153b:1142] - 9 -> Medion 5044 - 10 -> Kworld/KuroutoShikou SAA7130-TVPCI - 11 -> Terratec Cinergy 600 TV [153b:1143] - 12 -> Medion 7134 [16be:0003,16be:5000] - 13 -> Typhoon TV+Radio 90031 - 14 -> ELSA EX-VISION 300TV [1048:226b] - 15 -> ELSA EX-VISION 500TV [1048:226a] - 16 -> ASUS TV-FM 7134 [1043:4842,1043:4830,1043:4840] - 17 -> AOPEN VA1000 POWER [1131:7133] - 18 -> BMK MPEX No Tuner - 19 -> Compro VideoMate TV [185b:c100] - 20 -> Matrox CronosPlus [102B:48d0] - 21 -> 10MOONS PCI TV CAPTURE CARD [1131:2001] - 22 -> AverMedia M156 / Medion 2819 [1461:a70b] - 23 -> BMK MPEX Tuner - 24 -> KNC One TV-Station DVR [1894:a006] - 25 -> ASUS TV-FM 7133 [1043:4843] - 26 -> Pinnacle PCTV Stereo (saa7134) [11bd:002b] - 27 -> Manli MuchTV M-TV002 - 28 -> Manli MuchTV M-TV001 - 29 -> Nagase Sangyo TransGear 3000TV [1461:050c] - 30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM) [1019:4cb4] - 31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM) [1019:4cb5] - 32 -> AVACS SmartTV - 33 -> AVerMedia DVD EZMaker [1461:10ff] - 34 -> Noval Prime TV 7133 - 35 -> AverMedia AverTV Studio 305 [1461:2115] - 36 -> UPMOST PURPLE TV [12ab:0800] - 37 -> Items MuchTV Plus / IT-005 - 38 -> Terratec Cinergy 200 TV [153b:1152] - 39 -> LifeView FlyTV Platinum Mini [5168:0212,4e42:0212,5169:1502] - 40 -> Compro VideoMate TV PVR/FM [185b:c100] - 41 -> Compro VideoMate TV Gold+ [185b:c100] - 42 -> Sabrent SBT-TVFM (saa7130) - 43 -> :Zolid Xpert TV7134 - 44 -> Empire PCI TV-Radio LE - 45 -> Avermedia AVerTV Studio 307 [1461:9715] - 46 -> AVerMedia Cardbus TV/Radio (E500) [1461:d6ee] - 47 -> Terratec Cinergy 400 mobile [153b:1162] - 48 -> Terratec Cinergy 600 TV MK3 [153b:1158] - 49 -> Compro VideoMate Gold+ Pal [185b:c200] - 50 -> Pinnacle PCTV 300i DVB-T + PAL [11bd:002d] - 51 -> ProVideo PV952 [1540:9524] - 52 -> AverMedia AverTV/305 [1461:2108] - 53 -> ASUS TV-FM 7135 [1043:4845] - 54 -> LifeView FlyTV Platinum FM / Gold [5168:0214,5168:5214,1489:0214,5168:0304] - 55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere Duo [5168:0306,4E42:0306] - 56 -> Avermedia AVerTV 307 [1461:a70a] - 57 -> Avermedia AVerTV GO 007 FM [1461:f31f] - 58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0351,1421:0370,1421:1370] - 59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 - 60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus [5168:0502,4e42:0502,1489:0502] - 61 -> Philips TOUGH DVB-T reference design [1131:2004] - 62 -> Compro VideoMate TV Gold+II - 63 -> Kworld Xpert TV PVR7134 - 64 -> FlyTV mini Asus Digimatrix [1043:0210] - 65 -> V-Stream Studio TV Terminator - 66 -> Yuan TUN-900 (saa7135) - 67 -> Beholder BeholdTV 409 FM [0000:4091] - 68 -> GoTView 7135 PCI [5456:7135] - 69 -> Philips EUROPA V3 reference design [1131:2004] - 70 -> Compro Videomate DVB-T300 [185b:c900] - 71 -> Compro Videomate DVB-T200 [185b:c901] - 72 -> RTD Embedded Technologies VFG7350 [1435:7350] - 73 -> RTD Embedded Technologies VFG7330 [1435:7330] - 74 -> LifeView FlyTV Platinum Mini2 [14c0:1212] - 75 -> AVerMedia AVerTVHD MCE A180 [1461:1044] - 76 -> SKNet MonsterTV Mobile [1131:4ee9] - 77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e] - 78 -> ASUSTeK P7131 Dual [1043:4862] - 79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) - 80 -> ASUS Digimatrix TV [1043:0210] - 81 -> Philips Tiger reference design [1131:2018] - 82 -> MSI TV@Anywhere plus [1462:6231,1462:8624] - 83 -> Terratec Cinergy 250 PCI TV [153b:1160] - 84 -> LifeView FlyDVB Trio [5168:0319] - 85 -> AverTV DVB-T 777 [1461:2c05,1461:2c05] - 86 -> LifeView FlyDVB-T / Genius VideoWonder DVB-T [5168:0301,1489:0301] - 87 -> ADS Instant TV Duo Cardbus PTV331 [0331:1421] - 88 -> Tevion/KWorld DVB-T 220RF [17de:7201] - 89 -> ELSA EX-VISION 700TV [1048:226c] - 90 -> Kworld ATSC110/115 [17de:7350,17de:7352] - 91 -> AVerMedia A169 B [1461:7360] - 92 -> AVerMedia A169 B1 [1461:6360] - 93 -> Medion 7134 Bridge #2 [16be:0005] - 94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [5168:3306,5168:3502,5168:3307,4e42:3502] - 95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138] - 96 -> Medion Md8800 Quadro [16be:0007,16be:0008,16be:000d] - 97 -> LifeView FlyDVB-S /Acorp TV134DS [5168:0300,4e42:0300] - 98 -> Proteus Pro 2309 [0919:2003] - 99 -> AVerMedia TV Hybrid A16AR [1461:2c00] - 100 -> Asus Europa2 OEM [1043:4860] - 101 -> Pinnacle PCTV 310i [11bd:002f] - 102 -> Avermedia AVerTV Studio 507 [1461:9715] - 103 -> Compro Videomate DVB-T200A - 104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid [0070:6700,0070:6701,0070:6702,0070:6703,0070:6704,0070:6705] - 105 -> Terratec Cinergy HT PCMCIA [153b:1172] - 106 -> Encore ENLTV [1131:2342,1131:2341,3016:2344] - 107 -> Encore ENLTV-FM [1131:230f] - 108 -> Terratec Cinergy HT PCI [153b:1175] - 109 -> Philips Tiger - S Reference design - 110 -> Avermedia M102 [1461:f31e] - 111 -> ASUS P7131 4871 [1043:4871] - 112 -> ASUSTeK P7131 Hybrid [1043:4876] - 113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) [1019:4cb6] - 114 -> KWorld DVB-T 210 [17de:7250] - 115 -> Sabrent PCMCIA TV-PCB05 [0919:2003] - 116 -> 10MOONS TM300 TV Card [1131:2304] - 117 -> Avermedia Super 007 [1461:f01d] - 118 -> Beholder BeholdTV 401 [0000:4016] - 119 -> Beholder BeholdTV 403 [0000:4036] - 120 -> Beholder BeholdTV 403 FM [0000:4037] - 121 -> Beholder BeholdTV 405 [0000:4050] - 122 -> Beholder BeholdTV 405 FM [0000:4051] - 123 -> Beholder BeholdTV 407 [0000:4070] - 124 -> Beholder BeholdTV 407 FM [0000:4071] - 125 -> Beholder BeholdTV 409 [0000:4090] - 126 -> Beholder BeholdTV 505 FM [5ace:5050] - 127 -> Beholder BeholdTV 507 FM / BeholdTV 509 FM [5ace:5070,5ace:5090] - 128 -> Beholder BeholdTV Columbus TV/FM [0000:5201] - 129 -> Beholder BeholdTV 607 FM [5ace:6070] - 130 -> Beholder BeholdTV M6 [5ace:6190] - 131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022] - 132 -> Genius TVGO AM11MCE - 133 -> NXP Snake DVB-S reference design - 134 -> Medion/Creatix CTX953 Hybrid [16be:0010] - 135 -> MSI TV@nywhere A/D v1.1 [1462:8625] - 136 -> AVerMedia Cardbus TV/Radio (E506R) [1461:f436] - 137 -> AVerMedia Hybrid TV/Radio (A16D) [1461:f936] - 138 -> Avermedia M115 [1461:a836] - 139 -> Compro VideoMate T750 [185b:c900] - 140 -> Avermedia DVB-S Pro A700 [1461:a7a1] - 141 -> Avermedia DVB-S Hybrid+FM A700 [1461:a7a2] - 142 -> Beholder BeholdTV H6 [5ace:6290] - 143 -> Beholder BeholdTV M63 [5ace:6191] - 144 -> Beholder BeholdTV M6 Extra [5ace:6193] - 145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636,1461:f736] - 146 -> ASUSTeK P7131 Analog - 147 -> Asus Tiger 3in1 [1043:4878] - 148 -> Encore ENLTV-FM v5.3 [1a7f:2008] - 149 -> Avermedia PCI pure analog (M135A) [1461:f11d] - 150 -> Zogis Real Angel 220 - 151 -> ADS Tech Instant HDTV [1421:0380] - 152 -> Asus Tiger Rev:1.00 [1043:4857] - 153 -> Kworld Plus TV Analog Lite PCI [17de:7128] - 154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d] - 155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid [0070:6706,0070:6708] - 156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a] - 157 -> Avermedia AVerTV Studio 507UA [1461:a11b] - 158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9] - 159 -> Beholder BeholdTV 505 RDS [0000:505B] - 160 -> Beholder BeholdTV 507 RDS [0000:5071] - 161 -> Beholder BeholdTV 507 RDS [0000:507B] - 162 -> Beholder BeholdTV 607 FM [5ace:6071] - 163 -> Beholder BeholdTV 609 FM [5ace:6090] - 164 -> Beholder BeholdTV 609 FM [5ace:6091] - 165 -> Beholder BeholdTV 607 RDS [5ace:6072] - 166 -> Beholder BeholdTV 607 RDS [5ace:6073] - 167 -> Beholder BeholdTV 609 RDS [5ace:6092] - 168 -> Beholder BeholdTV 609 RDS [5ace:6093] - 169 -> Compro VideoMate S350/S300 [185b:c900] - 170 -> AverMedia AverTV Studio 505 [1461:a115] - 171 -> Beholder BeholdTV X7 [5ace:7595] - 172 -> RoverMedia TV Link Pro FM [19d1:0138] - 173 -> Zolid Hybrid TV Tuner PCI [1131:2004] - 174 -> Asus Europa Hybrid OEM [1043:4847] - 175 -> Leadtek Winfast DTV1000S [107d:6655] - 176 -> Beholder BeholdTV 505 RDS [0000:5051] - 177 -> Hawell HW-404M7 - 178 -> Beholder BeholdTV H7 [5ace:7190] - 179 -> Beholder BeholdTV A7 [5ace:7090] - 180 -> Avermedia PCI M733A [1461:4155,1461:4255] - 181 -> TechoTrend TT-budget T-3000 [13c2:2804] - 182 -> Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid [17de:b136] - 183 -> Compro VideoMate Vista M1F [185b:c900] - 184 -> Encore ENLTV-FM 3 [1a7f:2108] - 185 -> MagicPro ProHDTV Pro2 DMB-TH/Hybrid [17de:d136] - 186 -> Beholder BeholdTV 501 [5ace:5010] - 187 -> Beholder BeholdTV 503 FM [5ace:5030] - 188 -> Sensoray 811/911 [6000:0811,6000:0911] - 189 -> Kworld PC150-U [17de:a134] - 190 -> Asus My Cinema PS3-100 [1043:48cd] - 191 -> Hawell HW-9004V1 - 192 -> AverMedia AverTV Satellite Hybrid+FM A706 [1461:2055] - 193 -> WIS Voyager or compatible [1905:7007] - 194 -> AverMedia AverTV/505 [1461:a10a] - 195 -> Leadtek Winfast TV2100 FM [107d:6f3a] - 196 -> SnaZio* TVPVR PRO [1779:13cf] +=========== ======================================================= ================================================================ +Card number Card name PCI IDs +=========== ======================================================= ================================================================ +0 UNKNOWN/GENERIC +1 Proteus Pro [philips reference design] 1131:2001, 1131:2001 +2 LifeView FlyVIDEO3000 5168:0138, 4e42:0138 +3 LifeView/Typhoon FlyVIDEO2000 5168:0138, 4e42:0138 +4 EMPRESS 1131:6752 +5 SKNet Monster TV 1131:4e85 +6 Tevion MD 9717 +7 KNC One TV-Station RDS / Typhoon TV Tuner RDS 1131:fe01, 1894:fe01 +8 Terratec Cinergy 400 TV 153b:1142 +9 Medion 5044 +10 Kworld/KuroutoShikou SAA7130-TVPCI +11 Terratec Cinergy 600 TV 153b:1143 +12 Medion 7134 16be:0003, 16be:5000 +13 Typhoon TV+Radio 90031 +14 ELSA EX-VISION 300TV 1048:226b +15 ELSA EX-VISION 500TV 1048:226a +16 ASUS TV-FM 7134 1043:4842, 1043:4830, 1043:4840 +17 AOPEN VA1000 POWER 1131:7133 +18 BMK MPEX No Tuner +19 Compro VideoMate TV 185b:c100 +20 Matrox CronosPlus 102B:48d0 +21 10MOONS PCI TV CAPTURE CARD 1131:2001 +22 AverMedia M156 / Medion 2819 1461:a70b +23 BMK MPEX Tuner +24 KNC One TV-Station DVR 1894:a006 +25 ASUS TV-FM 7133 1043:4843 +26 Pinnacle PCTV Stereo (saa7134) 11bd:002b +27 Manli MuchTV M-TV002 +28 Manli MuchTV M-TV001 +29 Nagase Sangyo TransGear 3000TV 1461:050c +30 Elitegroup ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM) 1019:4cb4 +31 Elitegroup ECS TVP3XP FM1236 Tuner Card (NTSC,FM) 1019:4cb5 +32 AVACS SmartTV +33 AVerMedia DVD EZMaker 1461:10ff +34 Noval Prime TV 7133 +35 AverMedia AverTV Studio 305 1461:2115 +36 UPMOST PURPLE TV 12ab:0800 +37 Items MuchTV Plus / IT-005 +38 Terratec Cinergy 200 TV 153b:1152 +39 LifeView FlyTV Platinum Mini 5168:0212, 4e42:0212, 5169:1502 +40 Compro VideoMate TV PVR/FM 185b:c100 +41 Compro VideoMate TV Gold+ 185b:c100 +42 Sabrent SBT-TVFM (saa7130) +43 :Zolid Xpert TV7134 +44 Empire PCI TV-Radio LE +45 Avermedia AVerTV Studio 307 1461:9715 +46 AVerMedia Cardbus TV/Radio (E500) 1461:d6ee +47 Terratec Cinergy 400 mobile 153b:1162 +48 Terratec Cinergy 600 TV MK3 153b:1158 +49 Compro VideoMate Gold+ Pal 185b:c200 +50 Pinnacle PCTV 300i DVB-T + PAL 11bd:002d +51 ProVideo PV952 1540:9524 +52 AverMedia AverTV/305 1461:2108 +53 ASUS TV-FM 7135 1043:4845 +54 LifeView FlyTV Platinum FM / Gold 5168:0214, 5168:5214, 1489:0214, 5168:0304 +55 LifeView FlyDVB-T DUO / MSI TV@nywhere Duo 5168:0306, 4E42:0306 +56 Avermedia AVerTV 307 1461:a70a +57 Avermedia AVerTV GO 007 FM 1461:f31f +58 ADS Tech Instant TV (saa7135) 1421:0350, 1421:0351, 1421:0370, 1421:1370 +59 Kworld/Tevion V-Stream Xpert TV PVR7134 +60 LifeView/Typhoon/Genius FlyDVB-T Duo Cardbus 5168:0502, 4e42:0502, 1489:0502 +61 Philips TOUGH DVB-T reference design 1131:2004 +62 Compro VideoMate TV Gold+II +63 Kworld Xpert TV PVR7134 +64 FlyTV mini Asus Digimatrix 1043:0210 +65 V-Stream Studio TV Terminator +66 Yuan TUN-900 (saa7135) +67 Beholder BeholdTV 409 FM 0000:4091 +68 GoTView 7135 PCI 5456:7135 +69 Philips EUROPA V3 reference design 1131:2004 +70 Compro Videomate DVB-T300 185b:c900 +71 Compro Videomate DVB-T200 185b:c901 +72 RTD Embedded Technologies VFG7350 1435:7350 +73 RTD Embedded Technologies VFG7330 1435:7330 +74 LifeView FlyTV Platinum Mini2 14c0:1212 +75 AVerMedia AVerTVHD MCE A180 1461:1044 +76 SKNet MonsterTV Mobile 1131:4ee9 +77 Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e +78 ASUSTeK P7131 Dual 1043:4862 +79 Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) +80 ASUS Digimatrix TV 1043:0210 +81 Philips Tiger reference design 1131:2018 +82 MSI TV@Anywhere plus 1462:6231, 1462:8624 +83 Terratec Cinergy 250 PCI TV 153b:1160 +84 LifeView FlyDVB Trio 5168:0319 +85 AverTV DVB-T 777 1461:2c05, 1461:2c05 +86 LifeView FlyDVB-T / Genius VideoWonder DVB-T 5168:0301, 1489:0301 +87 ADS Instant TV Duo Cardbus PTV331 0331:1421 +88 Tevion/KWorld DVB-T 220RF 17de:7201 +89 ELSA EX-VISION 700TV 1048:226c +90 Kworld ATSC110/115 17de:7350, 17de:7352 +91 AVerMedia A169 B 1461:7360 +92 AVerMedia A169 B1 1461:6360 +93 Medion 7134 Bridge #2 16be:0005 +94 LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB 5168:3306, 5168:3502, 5168:3307, 4e42:3502 +95 LifeView FlyVIDEO3000 (NTSC) 5169:0138 +96 Medion Md8800 Quadro 16be:0007, 16be:0008, 16be:000d +97 LifeView FlyDVB-S /Acorp TV134DS 5168:0300, 4e42:0300 +98 Proteus Pro 2309 0919:2003 +99 AVerMedia TV Hybrid A16AR 1461:2c00 +100 Asus Europa2 OEM 1043:4860 +101 Pinnacle PCTV 310i 11bd:002f +102 Avermedia AVerTV Studio 507 1461:9715 +103 Compro Videomate DVB-T200A +104 Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700, 0070:6701, 0070:6702, 0070:6703, 0070:6704, 0070:6705 +105 Terratec Cinergy HT PCMCIA 153b:1172 +106 Encore ENLTV 1131:2342, 1131:2341, 3016:2344 +107 Encore ENLTV-FM 1131:230f +108 Terratec Cinergy HT PCI 153b:1175 +109 Philips Tiger - S Reference design +110 Avermedia M102 1461:f31e +111 ASUS P7131 4871 1043:4871 +112 ASUSTeK P7131 Hybrid 1043:4876 +113 Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) 1019:4cb6 +114 KWorld DVB-T 210 17de:7250 +115 Sabrent PCMCIA TV-PCB05 0919:2003 +116 10MOONS TM300 TV Card 1131:2304 +117 Avermedia Super 007 1461:f01d +118 Beholder BeholdTV 401 0000:4016 +119 Beholder BeholdTV 403 0000:4036 +120 Beholder BeholdTV 403 FM 0000:4037 +121 Beholder BeholdTV 405 0000:4050 +122 Beholder BeholdTV 405 FM 0000:4051 +123 Beholder BeholdTV 407 0000:4070 +124 Beholder BeholdTV 407 FM 0000:4071 +125 Beholder BeholdTV 409 0000:4090 +126 Beholder BeholdTV 505 FM 5ace:5050 +127 Beholder BeholdTV 507 FM / BeholdTV 509 FM 5ace:5070, 5ace:5090 +128 Beholder BeholdTV Columbus TV/FM 0000:5201 +129 Beholder BeholdTV 607 FM 5ace:6070 +130 Beholder BeholdTV M6 5ace:6190 +131 Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 +132 Genius TVGO AM11MCE +133 NXP Snake DVB-S reference design +134 Medion/Creatix CTX953 Hybrid 16be:0010 +135 MSI TV@nywhere A/D v1.1 1462:8625 +136 AVerMedia Cardbus TV/Radio (E506R) 1461:f436 +137 AVerMedia Hybrid TV/Radio (A16D) 1461:f936 +138 Avermedia M115 1461:a836 +139 Compro VideoMate T750 185b:c900 +140 Avermedia DVB-S Pro A700 1461:a7a1 +141 Avermedia DVB-S Hybrid+FM A700 1461:a7a2 +142 Beholder BeholdTV H6 5ace:6290 +143 Beholder BeholdTV M63 5ace:6191 +144 Beholder BeholdTV M6 Extra 5ace:6193 +145 AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636, 1461:f736 +146 ASUSTeK P7131 Analog +147 Asus Tiger 3in1 1043:4878 +148 Encore ENLTV-FM v5.3 1a7f:2008 +149 Avermedia PCI pure analog (M135A) 1461:f11d +150 Zogis Real Angel 220 +151 ADS Tech Instant HDTV 1421:0380 +152 Asus Tiger Rev:1.00 1043:4857 +153 Kworld Plus TV Analog Lite PCI 17de:7128 +154 Avermedia AVerTV GO 007 FM Plus 1461:f31d +155 Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706, 0070:6708 +156 Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707, 0070:6709, 0070:670a +157 Avermedia AVerTV Studio 507UA 1461:a11b +158 AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 +159 Beholder BeholdTV 505 RDS 0000:505B +160 Beholder BeholdTV 507 RDS 0000:5071 +161 Beholder BeholdTV 507 RDS 0000:507B +162 Beholder BeholdTV 607 FM 5ace:6071 +163 Beholder BeholdTV 609 FM 5ace:6090 +164 Beholder BeholdTV 609 FM 5ace:6091 +165 Beholder BeholdTV 607 RDS 5ace:6072 +166 Beholder BeholdTV 607 RDS 5ace:6073 +167 Beholder BeholdTV 609 RDS 5ace:6092 +168 Beholder BeholdTV 609 RDS 5ace:6093 +169 Compro VideoMate S350/S300 185b:c900 +170 AverMedia AverTV Studio 505 1461:a115 +171 Beholder BeholdTV X7 5ace:7595 +172 RoverMedia TV Link Pro FM 19d1:0138 +173 Zolid Hybrid TV Tuner PCI 1131:2004 +174 Asus Europa Hybrid OEM 1043:4847 +175 Leadtek Winfast DTV1000S 107d:6655 +176 Beholder BeholdTV 505 RDS 0000:5051 +177 Hawell HW-404M7 +178 Beholder BeholdTV H7 5ace:7190 +179 Beholder BeholdTV A7 5ace:7090 +180 Avermedia PCI M733A 1461:4155, 1461:4255 +181 TechoTrend TT-budget T-3000 13c2:2804 +182 Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid 17de:b136 +183 Compro VideoMate Vista M1F 185b:c900 +184 Encore ENLTV-FM 3 1a7f:2108 +185 MagicPro ProHDTV Pro2 DMB-TH/Hybrid 17de:d136 +186 Beholder BeholdTV 501 5ace:5010 +187 Beholder BeholdTV 503 FM 5ace:5030 +188 Sensoray 811/911 6000:0811, 6000:0911 +189 Kworld PC150-U 17de:a134 +190 Asus My Cinema PS3-100 1043:48cd +191 Hawell HW-9004V1 +192 AverMedia AverTV Satellite Hybrid+FM A706 1461:2055 +193 WIS Voyager or compatible 1905:7007 +194 AverMedia AverTV/505 1461:a10a +195 Leadtek Winfast TV2100 FM 107d:6f3a +196 SnaZio* TVPVR PRO 1779:13cf +=========== ======================================================= ================================================================ diff --git a/Documentation/media/v4l-drivers/saa7164-cardlist.rst b/Documentation/media/v4l-drivers/saa7164-cardlist.rst index b937836cd54c..7d17d38df3bc 100644 --- a/Documentation/media/v4l-drivers/saa7164-cardlist.rst +++ b/Documentation/media/v4l-drivers/saa7164-cardlist.rst @@ -1,19 +1,21 @@ -SAA7134 cards list +SAA7164 cards list ================== -.. code-block:: none - - 0 -> Unknown - 1 -> Generic Rev2 - 2 -> Generic Rev3 - 3 -> Hauppauge WinTV-HVR2250 [0070:8880,0070:8810] - 4 -> Hauppauge WinTV-HVR2200 [0070:8980] - 5 -> Hauppauge WinTV-HVR2200 [0070:8900] - 6 -> Hauppauge WinTV-HVR2200 [0070:8901] - 7 -> Hauppauge WinTV-HVR2250 [0070:8891,0070:8851] - 8 -> Hauppauge WinTV-HVR2250 [0070:88A1] - 9 -> Hauppauge WinTV-HVR2200 [0070:8940] - 10 -> Hauppauge WinTV-HVR2200 [0070:8953] - 11 -> Hauppauge WinTV-HVR2255(proto) - 12 -> Hauppauge WinTV-HVR2255 [0070:f111] - 13 -> Hauppauge WinTV-HVR2205 [0070:f123,0070:f120] +=========== ==================================== ==================== +Card number Card name PCI IDs +=========== ==================================== ==================== +0 Unknown +1 Generic Rev2 +2 Generic Rev3 +3 Hauppauge WinTV-HVR2250 0070:8880, 0070:8810 +4 Hauppauge WinTV-HVR2200 0070:8980 +5 Hauppauge WinTV-HVR2200 0070:8900 +6 Hauppauge WinTV-HVR2200 0070:8901 +7 Hauppauge WinTV-HVR2250 0070:8891, 0070:8851 +8 Hauppauge WinTV-HVR2250 0070:88A1 +9 Hauppauge WinTV-HVR2200 0070:8940 +10 Hauppauge WinTV-HVR2200 0070:8953 +11 Hauppauge WinTV-HVR2255(proto) 0070:f111 +12 Hauppauge WinTV-HVR2255 0070:f111 +13 Hauppauge WinTV-HVR2205 0070:f123, 0070:f120 +=========== ==================================== ==================== diff --git a/Documentation/media/v4l-drivers/tm6000-cardlist.rst b/Documentation/media/v4l-drivers/tm6000-cardlist.rst index 2fbd3886b5f0..ae2952683ccf 100644 --- a/Documentation/media/v4l-drivers/tm6000-cardlist.rst +++ b/Documentation/media/v4l-drivers/tm6000-cardlist.rst @@ -1,21 +1,24 @@ TM6000 cards list ================= -.. code-block:: none - - 1 -> Generic tm5600 board (tm5600) [6000:0001] - 2 -> Generic tm6000 board (tm6000) [6000:0001] - 3 -> Generic tm6010 board (tm6010) [6000:0002] - 4 -> 10Moons UT821 (tm5600) [6000:0001] - 5 -> 10Moons UT330 (tm5600) - 6 -> ADSTech Dual TV (tm6000) [06e1:f332] - 7 -> FreeCom and similar (tm6000) [14aa:0620] - 8 -> ADSTech Mini Dual TV (tm6000) [06e1:b339] - 9 -> Hauppauge WinTV HVR-900H/USB2 Stick (tm6010) [2040:6600,2040:6601,2040:6610,2040:6611] - 10 -> Beholder Wander (tm6010) [6000:dec0] - 11 -> Beholder Voyager (tm6010) [6000:dec1] - 12 -> TerraTec Cinergy Hybrid XE/Cinergy Hybrid Stick (tm6010) [0ccd:0086,0ccd:00a5] - 13 -> TwinHan TU501 (tm6010) [13d3:3240,13d3:3241,13d3:3243,13d3:3264] - 14 -> Beholder Wander Lite (tm6010) [6000:dec2] - 15 -> Beholder Voyager Lite (tm6010) [6000:dec3] - +=========== ================================================= ========================================== +Card number Card name USB IDs +=========== ================================================= ========================================== +0 Unknown tm6000 video grabber +1 Generic tm5600 board 6000:0001 +2 Generic tm6000 board +3 Generic tm6010 board 6000:0002 +4 10Moons UT 821 +5 10Moons UT 330 +6 ADSTECH Dual TV USB 06e1:f332 +7 Freecom Hybrid Stick / Moka DVB-T Receiver Dual 14aa:0620 +8 ADSTECH Mini Dual TV USB 06e1:b339 +9 Hauppauge WinTV HVR-900H / WinTV USB2-Stick 2040:6600, 2040:6601, 2040:6610, 2040:6611 +10 Beholder Wander DVB-T/TV/FM USB2.0 6000:dec0 +11 Beholder Voyager TV/FM USB2.0 6000:dec1 +12 Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick 0ccd:0086, 0ccd:00A5 +13 Twinhan TU501(704D1) 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264 +14 Beholder Wander Lite DVB-T/TV/FM USB2.0 6000:dec2 +15 Beholder Voyager Lite TV/FM USB2.0 6000:dec3 +16 Terratec Grabster AV 150/250 MX 0ccd:0079 +=========== ================================================= ========================================== diff --git a/Documentation/media/v4l-drivers/tuner-cardlist.rst b/Documentation/media/v4l-drivers/tuner-cardlist.rst index 2f1e1029c04e..276dd90e0c59 100644 --- a/Documentation/media/v4l-drivers/tuner-cardlist.rst +++ b/Documentation/media/v4l-drivers/tuner-cardlist.rst @@ -1,96 +1,98 @@ Tuner cards list ================ -.. code-block:: none - - tuner=0 - Temic PAL (4002 FH5) - tuner=1 - Philips PAL_I (FI1246 and compatibles) - tuner=2 - Philips NTSC (FI1236,FM1236 and compatibles) - tuner=3 - Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF) - tuner=4 - NoTuner - tuner=5 - Philips PAL_BG (FI1216 and compatibles) - tuner=6 - Temic NTSC (4032 FY5) - tuner=7 - Temic PAL_I (4062 FY5) - tuner=8 - Temic NTSC (4036 FY5) - tuner=9 - Alps HSBH1 - tuner=10 - Alps TSBE1 - tuner=11 - Alps TSBB5 - tuner=12 - Alps TSBE5 - tuner=13 - Alps TSBC5 - tuner=14 - Temic PAL_BG (4006FH5) - tuner=15 - Alps TSCH6 - tuner=16 - Temic PAL_DK (4016 FY5) - tuner=17 - Philips NTSC_M (MK2) - tuner=18 - Temic PAL_I (4066 FY5) - tuner=19 - Temic PAL* auto (4006 FN5) - tuner=20 - Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5) - tuner=21 - Temic NTSC (4039 FR5) - tuner=22 - Temic PAL/SECAM multi (4046 FM5) - tuner=23 - Philips PAL_DK (FI1256 and compatibles) - tuner=24 - Philips PAL/SECAM multi (FQ1216ME) - tuner=25 - LG PAL_I+FM (TAPC-I001D) - tuner=26 - LG PAL_I (TAPC-I701D) - tuner=27 - LG NTSC+FM (TPI8NSR01F) - tuner=28 - LG PAL_BG+FM (TPI8PSB01D) - tuner=29 - LG PAL_BG (TPI8PSB11D) - tuner=30 - Temic PAL* auto + FM (4009 FN5) - tuner=31 - SHARP NTSC_JP (2U5JF5540) - tuner=32 - Samsung PAL TCPM9091PD27 - tuner=33 - MT20xx universal - tuner=34 - Temic PAL_BG (4106 FH5) - tuner=35 - Temic PAL_DK/SECAM_L (4012 FY5) - tuner=36 - Temic NTSC (4136 FY5) - tuner=37 - LG PAL (newer TAPC series) - tuner=38 - Philips PAL/SECAM multi (FM1216ME MK3) - tuner=39 - LG NTSC (newer TAPC series) - tuner=40 - HITACHI V7-J180AT - tuner=41 - Philips PAL_MK (FI1216 MK) - tuner=42 - Philips FCV1236D ATSC/NTSC dual in - tuner=43 - Philips NTSC MK3 (FM1236MK3 or FM1236/F) - tuner=44 - Philips 4 in 1 (ATI TV Wonder Pro/Conexant) - tuner=45 - Microtune 4049 FM5 - tuner=46 - Panasonic VP27s/ENGE4324D - tuner=47 - LG NTSC (TAPE series) - tuner=48 - Tenna TNF 8831 BGFF) - tuner=49 - Microtune 4042 FI5 ATSC/NTSC dual in - tuner=50 - TCL 2002N - tuner=51 - Philips PAL/SECAM_D (FM 1256 I-H3) - tuner=52 - Thomson DTT 7610 (ATSC/NTSC) - tuner=53 - Philips FQ1286 - tuner=54 - Philips/NXP TDA 8290/8295 + 8275/8275A/18271 - tuner=55 - TCL 2002MB - tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4) - tuner=57 - Philips FQ1236A MK4 - tuner=58 - Ymec TVision TVF-8531MF/8831MF/8731MF - tuner=59 - Ymec TVision TVF-5533MF - tuner=60 - Thomson DTT 761X (ATSC/NTSC) - tuner=61 - Tena TNF9533-D/IF/TNF9533-B/DF - tuner=62 - Philips TEA5767HN FM Radio - tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner - tuner=64 - LG TDVS-H06xF - tuner=65 - Ymec TVF66T5-B/DFF - tuner=66 - LG TALN series - tuner=67 - Philips TD1316 Hybrid Tuner - tuner=68 - Philips TUV1236D ATSC/NTSC dual in - tuner=69 - Tena TNF 5335 and similar models - tuner=70 - Samsung TCPN 2121P30A - tuner=71 - Xceive xc2028/xc3028 tuner - tuner=72 - Thomson FE6600 - tuner=73 - Samsung TCPG 6121P30A - tuner=75 - Philips TEA5761 FM Radio - tuner=76 - Xceive 5000 tuner - tuner=77 - TCL tuner MF02GIP-5N-E - tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner - tuner=79 - Philips PAL/SECAM multi (FM1216 MK5) - tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough - tuner=81 - Partsnic (Daewoo) PTI-5NF05 - tuner=82 - Philips CU1216L - tuner=83 - NXP TDA18271 - tuner=84 - Sony BTF-Pxn01Z - tuner=85 - Philips FQ1236 MK5 - tuner=86 - Tena TNF5337 MFD - tuner=87 - Xceive 4000 tuner - tuner=88 - Xceive 5000C tuner - tuner=89 - Sony BTF-PG472Z PAL/SECAM - tuner=90 - Sony BTF-PK467Z NTSC-M-JP - tuner=91 - Sony BTF-PB463Z NTSC-M +============ ===================================================== +Tuner number Card name +============ ===================================================== +0 Temic PAL (4002 FH5) +1 Philips PAL_I (FI1246 and compatibles) +2 Philips NTSC (FI1236,FM1236 and compatibles) +3 Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF) +4 NoTuner +5 Philips PAL_BG (FI1216 and compatibles) +6 Temic NTSC (4032 FY5) +7 Temic PAL_I (4062 FY5) +8 Temic NTSC (4036 FY5) +9 Alps HSBH1 +10 Alps TSBE1 +11 Alps TSBB5 +12 Alps TSBE5 +13 Alps TSBC5 +14 Temic PAL_BG (4006FH5) +15 Alps TSCH6 +16 Temic PAL_DK (4016 FY5) +17 Philips NTSC_M (MK2) +18 Temic PAL_I (4066 FY5) +19 Temic PAL* auto (4006 FN5) +20 Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5) +21 Temic NTSC (4039 FR5) +22 Temic PAL/SECAM multi (4046 FM5) +23 Philips PAL_DK (FI1256 and compatibles) +24 Philips PAL/SECAM multi (FQ1216ME) +25 LG PAL_I+FM (TAPC-I001D) +26 LG PAL_I (TAPC-I701D) +27 LG NTSC+FM (TPI8NSR01F) +28 LG PAL_BG+FM (TPI8PSB01D) +29 LG PAL_BG (TPI8PSB11D) +30 Temic PAL* auto + FM (4009 FN5) +31 SHARP NTSC_JP (2U5JF5540) +32 Samsung PAL TCPM9091PD27 +33 MT20xx universal +34 Temic PAL_BG (4106 FH5) +35 Temic PAL_DK/SECAM_L (4012 FY5) +36 Temic NTSC (4136 FY5) +37 LG PAL (newer TAPC series) +38 Philips PAL/SECAM multi (FM1216ME MK3) +39 LG NTSC (newer TAPC series) +40 HITACHI V7-J180AT +41 Philips PAL_MK (FI1216 MK) +42 Philips FCV1236D ATSC/NTSC dual in +43 Philips NTSC MK3 (FM1236MK3 or FM1236/F) +44 Philips 4 in 1 (ATI TV Wonder Pro/Conexant) +45 Microtune 4049 FM5 +46 Panasonic VP27s/ENGE4324D +47 LG NTSC (TAPE series) +48 Tenna TNF 8831 BGFF) +49 Microtune 4042 FI5 ATSC/NTSC dual in +50 TCL 2002N +51 Philips PAL/SECAM_D (FM 1256 I-H3) +52 Thomson DTT 7610 (ATSC/NTSC) +53 Philips FQ1286 +54 Philips/NXP TDA 8290/8295 + 8275/8275A/18271 +55 TCL 2002MB +56 Philips PAL/SECAM multi (FQ1216AME MK4) +57 Philips FQ1236A MK4 +58 Ymec TVision TVF-8531MF/8831MF/8731MF +59 Ymec TVision TVF-5533MF +60 Thomson DTT 761X (ATSC/NTSC) +61 Tena TNF9533-D/IF/TNF9533-B/DF +62 Philips TEA5767HN FM Radio +63 Philips FMD1216ME MK3 Hybrid Tuner +64 LG TDVS-H06xF +65 Ymec TVF66T5-B/DFF +66 LG TALN series +67 Philips TD1316 Hybrid Tuner +68 Philips TUV1236D ATSC/NTSC dual in +69 Tena TNF 5335 and similar models +70 Samsung TCPN 2121P30A +71 Xceive xc2028/xc3028 tuner +72 Thomson FE6600 +73 Samsung TCPG 6121P30A +75 Philips TEA5761 FM Radio +76 Xceive 5000 tuner +77 TCL tuner MF02GIP-5N-E +78 Philips FMD1216MEX MK3 Hybrid Tuner +79 Philips PAL/SECAM multi (FM1216 MK5) +80 Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough +81 Partsnic (Daewoo) PTI-5NF05 +82 Philips CU1216L +83 NXP TDA18271 +84 Sony BTF-Pxn01Z +85 Philips FQ1236 MK5 +86 Tena TNF5337 MFD +87 Xceive 4000 tuner +88 Xceive 5000C tuner +89 Sony BTF-PG472Z PAL/SECAM +90 Sony BTF-PK467Z NTSC-M-JP +91 Sony BTF-PB463Z NTSC-M +============ ===================================================== diff --git a/Documentation/media/v4l-drivers/usbvision-cardlist.rst b/Documentation/media/v4l-drivers/usbvision-cardlist.rst index 3d8be9cb1b5a..44d53dff0984 100644 --- a/Documentation/media/v4l-drivers/usbvision-cardlist.rst +++ b/Documentation/media/v4l-drivers/usbvision-cardlist.rst @@ -1,72 +1,74 @@ -Usbvision cards list +USBvision cards list ==================== -.. code-block:: none - - 0 -> Xanboo [0a6f:0400] - 1 -> Belkin USB VideoBus II Adapter [050d:0106] - 2 -> Belkin Components USB VideoBus [050d:0207] - 3 -> Belkin USB VideoBus II [050d:0208] - 4 -> echoFX InterView Lite [0571:0002] - 5 -> USBGear USBG-V1 resp. HAMA USB [0573:0003] - 6 -> D-Link V100 [0573:0400] - 7 -> X10 USB Camera [0573:2000] - 8 -> Hauppauge WinTV USB Live (PAL B/G) [0573:2d00] - 9 -> Hauppauge WinTV USB Live Pro (NTSC M/N) [0573:2d01] - 10 -> Zoran Co. PMD (Nogatech) AV-grabber Manhattan [0573:2101] - 11 -> Nogatech USB-TV (NTSC) FM [0573:4100] - 12 -> PNY USB-TV (NTSC) FM [0573:4110] - 13 -> PixelView PlayTv-USB PRO (PAL) FM [0573:4450] - 14 -> ZTV ZT-721 2.4GHz USB A/V Receiver [0573:4550] - 15 -> Hauppauge WinTV USB (NTSC M/N) [0573:4d00] - 16 -> Hauppauge WinTV USB (PAL B/G) [0573:4d01] - 17 -> Hauppauge WinTV USB (PAL I) [0573:4d02] - 18 -> Hauppauge WinTV USB (PAL/SECAM L) [0573:4d03] - 19 -> Hauppauge WinTV USB (PAL D/K) [0573:4d04] - 20 -> Hauppauge WinTV USB (NTSC FM) [0573:4d10] - 21 -> Hauppauge WinTV USB (PAL B/G FM) [0573:4d11] - 22 -> Hauppauge WinTV USB (PAL I FM) [0573:4d12] - 23 -> Hauppauge WinTV USB (PAL D/K FM) [0573:4d14] - 24 -> Hauppauge WinTV USB Pro (NTSC M/N) [0573:4d2a] - 25 -> Hauppauge WinTV USB Pro (NTSC M/N) V2 [0573:4d2b] - 26 -> Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L) [0573:4d2c] - 27 -> Hauppauge WinTV USB Pro (NTSC M/N) V3 [0573:4d20] - 28 -> Hauppauge WinTV USB Pro (PAL B/G) [0573:4d21] - 29 -> Hauppauge WinTV USB Pro (PAL I) [0573:4d22] - 30 -> Hauppauge WinTV USB Pro (PAL/SECAM L) [0573:4d23] - 31 -> Hauppauge WinTV USB Pro (PAL D/K) [0573:4d24] - 32 -> Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) [0573:4d25] - 33 -> Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2 [0573:4d26] - 34 -> Hauppauge WinTV USB Pro (PAL B/G) V2 [0573:4d27] - 35 -> Hauppauge WinTV USB Pro (PAL B/G,D/K) [0573:4d28] - 36 -> Hauppauge WinTV USB Pro (PAL I,D/K) [0573:4d29] - 37 -> Hauppauge WinTV USB Pro (NTSC M/N FM) [0573:4d30] - 38 -> Hauppauge WinTV USB Pro (PAL B/G FM) [0573:4d31] - 39 -> Hauppauge WinTV USB Pro (PAL I FM) [0573:4d32] - 40 -> Hauppauge WinTV USB Pro (PAL D/K FM) [0573:4d34] - 41 -> Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM) [0573:4d35] - 42 -> Hauppauge WinTV USB Pro (Temic PAL B/G FM) [0573:4d36] - 43 -> Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM) [0573:4d37] - 44 -> Hauppauge WinTV USB Pro (NTSC M/N FM) V2 [0573:4d38] - 45 -> Camtel Technology USB TV Genie Pro FM Model TVB330 [0768:0006] - 46 -> Digital Video Creator I [07d0:0001] - 47 -> Global Village GV-007 (NTSC) [07d0:0002] - 48 -> Dazzle Fusion Model DVC-50 Rev 1 (NTSC) [07d0:0003] - 49 -> Dazzle Fusion Model DVC-80 Rev 1 (PAL) [07d0:0004] - 50 -> Dazzle Fusion Model DVC-90 Rev 1 (SECAM) [07d0:0005] - 51 -> Eskape Labs MyTV2Go [07f8:9104] - 52 -> Pinnacle Studio PCTV USB (PAL) [2304:010d] - 53 -> Pinnacle Studio PCTV USB (SECAM) [2304:0109] - 54 -> Pinnacle Studio PCTV USB (PAL) FM [2304:0110] - 55 -> Miro PCTV USB [2304:0111] - 56 -> Pinnacle Studio PCTV USB (NTSC) FM [2304:0112] - 57 -> Pinnacle Studio PCTV USB (PAL) FM V2 [2304:0210] - 58 -> Pinnacle Studio PCTV USB (NTSC) FM V2 [2304:0212] - 59 -> Pinnacle Studio PCTV USB (PAL) FM V3 [2304:0214] - 60 -> Pinnacle Studio Linx Video input cable (NTSC) [2304:0300] - 61 -> Pinnacle Studio Linx Video input cable (PAL) [2304:0301] - 62 -> Pinnacle PCTV Bungee USB (PAL) FM [2304:0419] - 63 -> Hauppauge WinTv-USB [2400:4200] - 64 -> Pinnacle Studio PCTV USB (NTSC) FM V3 [2304:0113] - 65 -> Nogatech USB MicroCam NTSC (NV3000N) [0573:3000] - 66 -> Nogatech USB MicroCam PAL (NV3001P) [0573:3001] +=========== ======================================================== ========= +Card number Card name USB IDs +=========== ======================================================== ========= +0 Xanboo 0a6f:0400 +1 Belkin USB VideoBus II Adapter 050d:0106 +2 Belkin Components USB VideoBus 050d:0207 +3 Belkin USB VideoBus II 050d:0208 +4 echoFX InterView Lite 0571:0002 +5 USBGear USBG-V1 resp. HAMA USB 0573:0003 +6 D-Link V100 0573:0400 +7 X10 USB Camera 0573:2000 +8 Hauppauge WinTV USB Live (PAL B/G) 0573:2d00 +9 Hauppauge WinTV USB Live Pro (NTSC M/N) 0573:2d01 +10 Zoran Co. PMD (Nogatech) AV-grabber Manhattan 0573:2101 +11 Nogatech USB-TV (NTSC) FM 0573:4100 +12 PNY USB-TV (NTSC) FM 0573:4110 +13 PixelView PlayTv-USB PRO (PAL) FM 0573:4450 +14 ZTV ZT-721 2.4GHz USB A/V Receiver 0573:4550 +15 Hauppauge WinTV USB (NTSC M/N) 0573:4d00 +16 Hauppauge WinTV USB (PAL B/G) 0573:4d01 +17 Hauppauge WinTV USB (PAL I) 0573:4d02 +18 Hauppauge WinTV USB (PAL/SECAM L) 0573:4d03 +19 Hauppauge WinTV USB (PAL D/K) 0573:4d04 +20 Hauppauge WinTV USB (NTSC FM) 0573:4d10 +21 Hauppauge WinTV USB (PAL B/G FM) 0573:4d11 +22 Hauppauge WinTV USB (PAL I FM) 0573:4d12 +23 Hauppauge WinTV USB (PAL D/K FM) 0573:4d14 +24 Hauppauge WinTV USB Pro (NTSC M/N) 0573:4d2a +25 Hauppauge WinTV USB Pro (NTSC M/N) V2 0573:4d2b +26 Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L) 0573:4d2c +27 Hauppauge WinTV USB Pro (NTSC M/N) V3 0573:4d20 +28 Hauppauge WinTV USB Pro (PAL B/G) 0573:4d21 +29 Hauppauge WinTV USB Pro (PAL I) 0573:4d22 +30 Hauppauge WinTV USB Pro (PAL/SECAM L) 0573:4d23 +31 Hauppauge WinTV USB Pro (PAL D/K) 0573:4d24 +32 Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) 0573:4d25 +33 Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2 0573:4d26 +34 Hauppauge WinTV USB Pro (PAL B/G) V2 0573:4d27 +35 Hauppauge WinTV USB Pro (PAL B/G,D/K) 0573:4d28 +36 Hauppauge WinTV USB Pro (PAL I,D/K) 0573:4d29 +37 Hauppauge WinTV USB Pro (NTSC M/N FM) 0573:4d30 +38 Hauppauge WinTV USB Pro (PAL B/G FM) 0573:4d31 +39 Hauppauge WinTV USB Pro (PAL I FM) 0573:4d32 +40 Hauppauge WinTV USB Pro (PAL D/K FM) 0573:4d34 +41 Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM) 0573:4d35 +42 Hauppauge WinTV USB Pro (Temic PAL B/G FM) 0573:4d36 +43 Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM) 0573:4d37 +44 Hauppauge WinTV USB Pro (NTSC M/N FM) V2 0573:4d38 +45 Camtel Technology USB TV Genie Pro FM Model TVB330 0768:0006 +46 Digital Video Creator I 07d0:0001 +47 Global Village GV-007 (NTSC) 07d0:0002 +48 Dazzle Fusion Model DVC-50 Rev 1 (NTSC) 07d0:0003 +49 Dazzle Fusion Model DVC-80 Rev 1 (PAL) 07d0:0004 +50 Dazzle Fusion Model DVC-90 Rev 1 (SECAM) 07d0:0005 +51 Eskape Labs MyTV2Go 07f8:9104 +52 Pinnacle Studio PCTV USB (PAL) 2304:010d +53 Pinnacle Studio PCTV USB (SECAM) 2304:0109 +54 Pinnacle Studio PCTV USB (PAL) FM 2304:0110 +55 Miro PCTV USB 2304:0111 +56 Pinnacle Studio PCTV USB (NTSC) FM 2304:0112 +57 Pinnacle Studio PCTV USB (PAL) FM V2 2304:0210 +58 Pinnacle Studio PCTV USB (NTSC) FM V2 2304:0212 +59 Pinnacle Studio PCTV USB (PAL) FM V3 2304:0214 +60 Pinnacle Studio Linx Video input cable (NTSC) 2304:0300 +61 Pinnacle Studio Linx Video input cable (PAL) 2304:0301 +62 Pinnacle PCTV Bungee USB (PAL) FM 2304:0419 +63 Hauppauge WinTv-USB 2400:4200 +64 Pinnacle Studio PCTV USB (NTSC) FM V3 2304:0113 +65 Nogatech USB MicroCam NTSC (NV3000N) 0573:3000 +66 Nogatech USB MicroCam PAL (NV3001P) 0573:3001 +=========== ======================================================== ========= diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions index 1d3f27d922b2..e11a0d0a8931 100644 --- a/Documentation/media/videodev2.h.rst.exceptions +++ b/Documentation/media/videodev2.h.rst.exceptions @@ -87,6 +87,10 @@ replace symbol V4L2_YCBCR_ENC_XV601 :c:type:`v4l2_ycbcr_encoding` replace symbol V4L2_YCBCR_ENC_XV709 :c:type:`v4l2_ycbcr_encoding` replace symbol V4L2_YCBCR_ENC_SMPTE240M :c:type:`v4l2_ycbcr_encoding` +# Documented enum v4l2_hsv_encoding +replace symbol V4L2_HSV_ENC_180 :c:type:`v4l2_hsv_encoding` +replace symbol V4L2_HSV_ENC_256 :c:type:`v4l2_hsv_encoding` + # Documented enum v4l2_quantization replace symbol V4L2_QUANTIZATION_DEFAULT :c:type:`v4l2_quantization` replace symbol V4L2_QUANTIZATION_FULL_RANGE :c:type:`v4l2_quantization` @@ -276,6 +280,9 @@ replace define V4L2_DV_FL_REDUCED_FPS dv-bt-standards replace define V4L2_DV_FL_HALF_LINE dv-bt-standards replace define V4L2_DV_FL_IS_CE_VIDEO dv-bt-standards replace define V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE dv-bt-standards +replace define V4L2_DV_FL_HAS_PICTURE_ASPECT dv-bt-standards +replace define V4L2_DV_FL_HAS_CEA861_VIC dv-bt-standards +replace define V4L2_DV_FL_HAS_HDMI_VIC dv-bt-standards replace define V4L2_DV_BT_656_1120 dv-timing-types diff --git a/MAINTAINERS b/MAINTAINERS index 851b89b9edcb..7db3f7ae6558 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2964,15 +2964,15 @@ L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git W: http://linuxtv.org S: Supported -F: Documentation/cec.txt +F: Documentation/media/kapi/cec-core.rst F: Documentation/media/uapi/cec -F: drivers/staging/media/cec/ +F: drivers/media/cec/ F: drivers/media/cec-edid.c F: drivers/media/rc/keymaps/rc-cec.c F: include/media/cec.h F: include/media/cec-edid.h -F: include/linux/cec.h -F: include/linux/cec-funcs.h +F: include/uapi/linux/cec.h +F: include/uapi/linux/cec-funcs.h CELL BROADBAND ENGINE ARCHITECTURE M: Arnd Bergmann <arnd@arndb.de> @@ -7725,6 +7725,15 @@ F: Documentation/devicetree/bindings/media/renesas,fcp.txt F: drivers/media/platform/rcar-fcp.c F: include/media/rcar-fcp.h +MEDIA DRIVERS FOR RENESAS - FDP1 +M: Kieran Bingham <kieran@bingham.xyz> +L: linux-media@vger.kernel.org +L: linux-renesas-soc@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +S: Supported +F: Documentation/devicetree/bindings/media/renesas,fdp1.txt +F: drivers/media/platform/rcar_fdp1.c + MEDIA DRIVERS FOR RENESAS - VIN M: Niklas Söderlund <niklas.soderlund@ragnatech.se> L: linux-media@vger.kernel.org @@ -7831,6 +7840,24 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/mediatek/ +MEDIATEK MEDIA DRIVER +M: Tiffany Lin <tiffany.lin@mediatek.com> +M: Andrew-CT Chen <andrew-ct.chen@mediatek.com> +S: Supported +F: drivers/media/platform/mtk-vcodec/ +F: drivers/media/platform/mtk-vpu/ +F: Documentation/devicetree/bindings/media/mediatek-vcodec.txt +F: Documentation/devicetree/bindings/media/mediatek-vpu.txt + +MEDIATEK MDP DRIVER +M: Minghsiu Tsai <minghsiu.tsai@mediatek.com> +M: Houlong Wei <houlong.wei@mediatek.com> +M: Andrew-CT Chen <andrew-ct.chen@mediatek.com> +S: Supported +F: drivers/media/platform/mtk-mdp/ +F: drivers/media/platform/mtk-vpu/ +F: Documentation/devicetree/bindings/media/mediatek-mdp.txt + MEDIATEK MT7601U WIRELESS LAN DRIVER M: Jakub Kicinski <kubakici@wp.pl> L: linux-wireless@vger.kernel.org @@ -9782,7 +9809,7 @@ M: Hans Verkuil <hverkuil@xs4all.nl> L: linux-media@vger.kernel.org T: git git://linuxtv.org/media_tree.git S: Maintained -F: drivers/staging/media/pulse8-cec +F: drivers/media/usb/pulse8-cec/* PVRUSB2 VIDEO4LINUX DRIVER M: Mike Isely <isely@pobox.com> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 1c71e256601d..6689abf99367 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -41,6 +41,14 @@ dpi0 = &dpi0; dsi0 = &dsi0; dsi1 = &dsi1; + mdp_rdma0 = &mdp_rdma0; + mdp_rdma1 = &mdp_rdma1; + mdp_rsz0 = &mdp_rsz0; + mdp_rsz1 = &mdp_rsz1; + mdp_rsz2 = &mdp_rsz2; + mdp_wdma0 = &mdp_wdma0; + mdp_wrot0 = &mdp_wrot0; + mdp_wrot1 = &mdp_wrot1; }; cpus { @@ -755,6 +763,82 @@ #clock-cells = <1>; }; + mdp { + compatible = "mediatek,mt8173-mdp"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + mediatek,vpu = <&vpu>; + + mdp_rdma0: rdma@14001000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mediatek,larb = <&larb0>; + }; + + mdp_rdma1: rdma@14002000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA1>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA1>; + mediatek,larb = <&larb4>; + }; + + mdp_rsz0: rsz@14003000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz1: rsz@14004000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz2: rsz@14005000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_wdma0: wdma@14006000 { + compatible = "mediatek,mt8173-mdp-wdma"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WDMA>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WDMA>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot0: wrot@14007000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot1: wrot@14008000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14008000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT1>; + mediatek,larb = <&larb4>; + }; + }; + ovl0: ovl@1400c000 { compatible = "mediatek,mt8173-disp-ovl"; reg = <0 0x1400c000 0 0x1000>; @@ -1051,6 +1135,50 @@ #clock-cells = <1>; }; + vcodec_dec: vcodec@16000000 { + compatible = "mediatek,mt8173-vcodec-dec"; + reg = <0 0x16000000 0 0x100>, /* VDEC_SYS */ + <0 0x16020000 0 0x1000>, /* VDEC_MISC */ + <0 0x16021000 0 0x800>, /* VDEC_LD */ + <0 0x16021800 0 0x800>, /* VDEC_TOP */ + <0 0x16022000 0 0x1000>, /* VDEC_CM */ + <0 0x16023000 0 0x1000>, /* VDEC_AD */ + <0 0x16024000 0 0x1000>, /* VDEC_AV */ + <0 0x16025000 0 0x1000>, /* VDEC_PP */ + <0 0x16026800 0 0x800>, /* VDEC_HWD */ + <0 0x16027000 0 0x800>, /* VDEC_HWQ */ + <0 0x16027800 0 0x800>, /* VDEC_HWB */ + <0 0x16028400 0 0x400>; /* VDEC_HWG */ + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + mediatek,larb = <&larb1>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; + mediatek,vpu = <&vpu>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&topckgen CLK_TOP_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>, + <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; + clock-names = "vcodecpll", + "univpll_d2", + "clk_cci400_sel", + "vdec_sel", + "vdecpll", + "vencpll", + "venc_lt_sel", + "vdec_bus_clk_src"; + }; + larb1: larb@16010000 { compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x16010000 0 0x1000>; diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 7b8540291217..bc643cbf813e 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -80,6 +80,22 @@ config MEDIA_RC_SUPPORT Say Y when you have a TV or an IR device. +config MEDIA_CEC_SUPPORT + bool "HDMI CEC support" + select MEDIA_CEC_EDID + ---help--- + Enable support for HDMI CEC (Consumer Electronics Control), + which is an optional HDMI feature. + + Say Y when you have an HDMI receiver, transmitter or a USB CEC + adapter that supports HDMI CEC. + +config MEDIA_CEC_DEBUG + bool "HDMI CEC debugfs interface" + depends on MEDIA_CEC_SUPPORT && DEBUG_FS + ---help--- + Turns on the DebugFS interface for CEC devices. + config MEDIA_CEC_EDID bool diff --git a/drivers/media/Makefile b/drivers/media/Makefile index 0deaa93efdee..d87ccb8eeabe 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -6,6 +6,10 @@ ifeq ($(CONFIG_MEDIA_CEC_EDID),y) obj-$(CONFIG_MEDIA_SUPPORT) += cec-edid.o endif +ifeq ($(CONFIG_MEDIA_CEC_SUPPORT),y) + obj-$(CONFIG_MEDIA_SUPPORT) += cec/ +endif + media-objs := media-device.o media-devnode.o media-entity.o # diff --git a/drivers/staging/media/cec/Makefile b/drivers/media/cec/Makefile index bd7f3c593468..d6686337275f 100644 --- a/drivers/staging/media/cec/Makefile +++ b/drivers/media/cec/Makefile @@ -1,5 +1,5 @@ cec-objs := cec-core.o cec-adap.o cec-api.o -ifeq ($(CONFIG_MEDIA_CEC),y) +ifeq ($(CONFIG_MEDIA_CEC_SUPPORT),y) obj-$(CONFIG_MEDIA_SUPPORT) += cec.o endif diff --git a/drivers/staging/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index 611e07b78bfe..d9c6f2c1c6fa 100644 --- a/drivers/staging/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -587,7 +587,6 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, msg->tx_nack_cnt = 0; msg->tx_low_drive_cnt = 0; msg->tx_error_cnt = 0; - msg->flags = 0; msg->sequence = ++adap->sequence; if (!msg->sequence) msg->sequence = ++adap->sequence; @@ -596,6 +595,10 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, /* Make sure the timeout isn't 0. */ msg->timeout = 1000; } + if (msg->timeout) + msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS; + else + msg->flags = 0; /* Sanity checks */ if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) { @@ -763,14 +766,105 @@ EXPORT_SYMBOL_GPL(cec_transmit_msg); static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, bool is_reply); +#define DIRECTED 0x80 +#define BCAST1_4 0x40 +#define BCAST2_0 0x20 /* broadcast only allowed for >= 2.0 */ +#define BCAST (BCAST1_4 | BCAST2_0) +#define BOTH (BCAST | DIRECTED) + +/* + * Specify minimum length and whether the message is directed, broadcast + * or both. Messages that do not match the criteria are ignored as per + * the CEC specification. + */ +static const u8 cec_msg_size[256] = { + [CEC_MSG_ACTIVE_SOURCE] = 4 | BCAST, + [CEC_MSG_IMAGE_VIEW_ON] = 2 | DIRECTED, + [CEC_MSG_TEXT_VIEW_ON] = 2 | DIRECTED, + [CEC_MSG_INACTIVE_SOURCE] = 4 | DIRECTED, + [CEC_MSG_REQUEST_ACTIVE_SOURCE] = 2 | BCAST, + [CEC_MSG_ROUTING_CHANGE] = 6 | BCAST, + [CEC_MSG_ROUTING_INFORMATION] = 4 | BCAST, + [CEC_MSG_SET_STREAM_PATH] = 4 | BCAST, + [CEC_MSG_STANDBY] = 2 | BOTH, + [CEC_MSG_RECORD_OFF] = 2 | DIRECTED, + [CEC_MSG_RECORD_ON] = 3 | DIRECTED, + [CEC_MSG_RECORD_STATUS] = 3 | DIRECTED, + [CEC_MSG_RECORD_TV_SCREEN] = 2 | DIRECTED, + [CEC_MSG_CLEAR_ANALOGUE_TIMER] = 13 | DIRECTED, + [CEC_MSG_CLEAR_DIGITAL_TIMER] = 16 | DIRECTED, + [CEC_MSG_CLEAR_EXT_TIMER] = 13 | DIRECTED, + [CEC_MSG_SET_ANALOGUE_TIMER] = 13 | DIRECTED, + [CEC_MSG_SET_DIGITAL_TIMER] = 16 | DIRECTED, + [CEC_MSG_SET_EXT_TIMER] = 13 | DIRECTED, + [CEC_MSG_SET_TIMER_PROGRAM_TITLE] = 2 | DIRECTED, + [CEC_MSG_TIMER_CLEARED_STATUS] = 3 | DIRECTED, + [CEC_MSG_TIMER_STATUS] = 3 | DIRECTED, + [CEC_MSG_CEC_VERSION] = 3 | DIRECTED, + [CEC_MSG_GET_CEC_VERSION] = 2 | DIRECTED, + [CEC_MSG_GIVE_PHYSICAL_ADDR] = 2 | DIRECTED, + [CEC_MSG_GET_MENU_LANGUAGE] = 2 | DIRECTED, + [CEC_MSG_REPORT_PHYSICAL_ADDR] = 5 | BCAST, + [CEC_MSG_SET_MENU_LANGUAGE] = 5 | BCAST, + [CEC_MSG_REPORT_FEATURES] = 6 | BCAST, + [CEC_MSG_GIVE_FEATURES] = 2 | DIRECTED, + [CEC_MSG_DECK_CONTROL] = 3 | DIRECTED, + [CEC_MSG_DECK_STATUS] = 3 | DIRECTED, + [CEC_MSG_GIVE_DECK_STATUS] = 3 | DIRECTED, + [CEC_MSG_PLAY] = 3 | DIRECTED, + [CEC_MSG_GIVE_TUNER_DEVICE_STATUS] = 3 | DIRECTED, + [CEC_MSG_SELECT_ANALOGUE_SERVICE] = 6 | DIRECTED, + [CEC_MSG_SELECT_DIGITAL_SERVICE] = 9 | DIRECTED, + [CEC_MSG_TUNER_DEVICE_STATUS] = 7 | DIRECTED, + [CEC_MSG_TUNER_STEP_DECREMENT] = 2 | DIRECTED, + [CEC_MSG_TUNER_STEP_INCREMENT] = 2 | DIRECTED, + [CEC_MSG_DEVICE_VENDOR_ID] = 5 | BCAST, + [CEC_MSG_GIVE_DEVICE_VENDOR_ID] = 2 | DIRECTED, + [CEC_MSG_VENDOR_COMMAND] = 2 | DIRECTED, + [CEC_MSG_VENDOR_COMMAND_WITH_ID] = 5 | BOTH, + [CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN] = 2 | BOTH, + [CEC_MSG_VENDOR_REMOTE_BUTTON_UP] = 2 | BOTH, + [CEC_MSG_SET_OSD_STRING] = 3 | DIRECTED, + [CEC_MSG_GIVE_OSD_NAME] = 2 | DIRECTED, + [CEC_MSG_SET_OSD_NAME] = 2 | DIRECTED, + [CEC_MSG_MENU_REQUEST] = 3 | DIRECTED, + [CEC_MSG_MENU_STATUS] = 3 | DIRECTED, + [CEC_MSG_USER_CONTROL_PRESSED] = 3 | DIRECTED, + [CEC_MSG_USER_CONTROL_RELEASED] = 2 | DIRECTED, + [CEC_MSG_GIVE_DEVICE_POWER_STATUS] = 2 | DIRECTED, + [CEC_MSG_REPORT_POWER_STATUS] = 3 | DIRECTED | BCAST2_0, + [CEC_MSG_FEATURE_ABORT] = 4 | DIRECTED, + [CEC_MSG_ABORT] = 2 | DIRECTED, + [CEC_MSG_GIVE_AUDIO_STATUS] = 2 | DIRECTED, + [CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS] = 2 | DIRECTED, + [CEC_MSG_REPORT_AUDIO_STATUS] = 3 | DIRECTED, + [CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED, + [CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED, + [CEC_MSG_SET_SYSTEM_AUDIO_MODE] = 3 | BOTH, + [CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST] = 2 | DIRECTED, + [CEC_MSG_SYSTEM_AUDIO_MODE_STATUS] = 3 | DIRECTED, + [CEC_MSG_SET_AUDIO_RATE] = 3 | DIRECTED, + [CEC_MSG_INITIATE_ARC] = 2 | DIRECTED, + [CEC_MSG_REPORT_ARC_INITIATED] = 2 | DIRECTED, + [CEC_MSG_REPORT_ARC_TERMINATED] = 2 | DIRECTED, + [CEC_MSG_REQUEST_ARC_INITIATION] = 2 | DIRECTED, + [CEC_MSG_REQUEST_ARC_TERMINATION] = 2 | DIRECTED, + [CEC_MSG_TERMINATE_ARC] = 2 | DIRECTED, + [CEC_MSG_REQUEST_CURRENT_LATENCY] = 4 | BCAST, + [CEC_MSG_REPORT_CURRENT_LATENCY] = 7 | BCAST, + [CEC_MSG_CDC_MESSAGE] = 2 | BCAST, +}; + /* Called by the CEC adapter if a message is received */ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg) { struct cec_data *data; u8 msg_init = cec_msg_initiator(msg); u8 msg_dest = cec_msg_destination(msg); + u8 cmd = msg->msg[1]; bool is_reply = false; bool valid_la = true; + u8 min_len = 0; if (WARN_ON(!msg->len || msg->len > CEC_MAX_MSG_SIZE)) return; @@ -780,6 +874,10 @@ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg) msg->sequence = msg->reply = msg->timeout = 0; msg->tx_status = 0; msg->tx_ts = 0; + msg->tx_arb_lost_cnt = 0; + msg->tx_nack_cnt = 0; + msg->tx_low_drive_cnt = 0; + msg->tx_error_cnt = 0; msg->flags = 0; memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len); @@ -790,9 +888,71 @@ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg) if (!cec_msg_is_broadcast(msg)) valid_la = cec_has_log_addr(adap, msg_dest); + /* + * Check if the length is not too short or if the message is a + * broadcast message where a directed message was expected or + * vice versa. If so, then the message has to be ignored (according + * to section CEC 7.3 and CEC 12.2). + */ + if (valid_la && msg->len > 1 && cec_msg_size[cmd]) { + u8 dir_fl = cec_msg_size[cmd] & BOTH; + + min_len = cec_msg_size[cmd] & 0x1f; + if (msg->len < min_len) + valid_la = false; + else if (!cec_msg_is_broadcast(msg) && !(dir_fl & DIRECTED)) + valid_la = false; + else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST1_4)) + valid_la = false; + else if (cec_msg_is_broadcast(msg) && + adap->log_addrs.cec_version >= CEC_OP_CEC_VERSION_2_0 && + !(dir_fl & BCAST2_0)) + valid_la = false; + } + if (valid_la && min_len) { + /* These messages have special length requirements */ + switch (cmd) { + case CEC_MSG_TIMER_STATUS: + if (msg->msg[2] & 0x10) { + switch (msg->msg[2] & 0xf) { + case CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE: + case CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE: + if (msg->len < 5) + valid_la = false; + break; + } + } else if ((msg->msg[2] & 0xf) == CEC_OP_PROG_ERROR_DUPLICATE) { + if (msg->len < 5) + valid_la = false; + } + break; + case CEC_MSG_RECORD_ON: + switch (msg->msg[2]) { + case CEC_OP_RECORD_SRC_OWN: + break; + case CEC_OP_RECORD_SRC_DIGITAL: + if (msg->len < 10) + valid_la = false; + break; + case CEC_OP_RECORD_SRC_ANALOG: + if (msg->len < 7) + valid_la = false; + break; + case CEC_OP_RECORD_SRC_EXT_PLUG: + if (msg->len < 4) + valid_la = false; + break; + case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR: + if (msg->len < 5) + valid_la = false; + break; + } + break; + } + } + /* It's a valid message and not a poll or CDC message */ - if (valid_la && msg->len > 1 && msg->msg[1] != CEC_MSG_CDC_MESSAGE) { - u8 cmd = msg->msg[1]; + if (valid_la && msg->len > 1 && cmd != CEC_MSG_CDC_MESSAGE) { bool abort = cmd == CEC_MSG_FEATURE_ABORT; /* The aborted command is in msg[2] */ @@ -806,6 +966,18 @@ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg) list_for_each_entry(data, &adap->wait_queue, list) { struct cec_msg *dst = &data->msg; + /* + * The *only* CEC message that has two possible replies + * is CEC_MSG_INITIATE_ARC. + * In this case allow either of the two replies. + */ + if (!abort && dst->msg[1] == CEC_MSG_INITIATE_ARC && + (cmd == CEC_MSG_REPORT_ARC_INITIATED || + cmd == CEC_MSG_REPORT_ARC_TERMINATED) && + (dst->reply == CEC_MSG_REPORT_ARC_INITIATED || + dst->reply == CEC_MSG_REPORT_ARC_TERMINATED)) + dst->reply = cmd; + /* Does the command match? */ if ((abort && cmd != dst->msg[1]) || (!abort && cmd != dst->reply)) @@ -823,6 +995,7 @@ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg) dst->rx_status = msg->rx_status; if (abort) dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT; + msg->flags = dst->flags; /* Remove it from the wait_queue */ list_del_init(&data->list); @@ -1068,7 +1241,8 @@ configured: mutex_unlock(&adap->lock); for (i = 0; i < las->num_log_addrs; i++) { - if (las->log_addr[i] == CEC_LOG_ADDR_INVALID) + if (las->log_addr[i] == CEC_LOG_ADDR_INVALID || + (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY)) continue; /* @@ -1190,6 +1364,29 @@ int __cec_s_log_addrs(struct cec_adapter *adap, return 0; } + if (log_addrs->flags & CEC_LOG_ADDRS_FL_CDC_ONLY) { + /* + * Sanitize log_addrs fields if a CDC-Only device is + * requested. + */ + log_addrs->num_log_addrs = 1; + log_addrs->osd_name[0] = '\0'; + log_addrs->vendor_id = CEC_VENDOR_ID_NONE; + log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED; + /* + * This is just an internal convention since a CDC-Only device + * doesn't have to be a switch. But switches already use + * unregistered, so it makes some kind of sense to pick this + * as the primary device. Since a CDC-Only device never sends + * any 'normal' CEC messages this primary device type is never + * sent over the CEC bus. + */ + log_addrs->primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_SWITCH; + log_addrs->all_device_types[0] = 0; + log_addrs->features[0][0] = 0; + log_addrs->features[0][1] = 0; + } + /* Ensure the osd name is 0-terminated */ log_addrs->osd_name[sizeof(log_addrs->osd_name) - 1] = '\0'; @@ -1223,6 +1420,7 @@ int __cec_s_log_addrs(struct cec_adapter *adap, const u8 feature_sz = ARRAY_SIZE(log_addrs->features[0]); u8 *features = log_addrs->features[i]; bool op_is_dev_features = false; + unsigned j; log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID; if (type_mask & (1 << log_addrs->log_addr_type[i])) { @@ -1249,19 +1447,19 @@ int __cec_s_log_addrs(struct cec_adapter *adap, dprintk(1, "unknown logical address type\n"); return -EINVAL; } - for (i = 0; i < feature_sz; i++) { - if ((features[i] & 0x80) == 0) { + for (j = 0; j < feature_sz; j++) { + if ((features[j] & 0x80) == 0) { if (op_is_dev_features) break; op_is_dev_features = true; } } - if (!op_is_dev_features || i == feature_sz) { + if (!op_is_dev_features || j == feature_sz) { dprintk(1, "malformed features\n"); return -EINVAL; } /* Zero unused part of the feature array */ - memset(features + i + 1, 0, feature_sz - i - 1); + memset(features + j + 1, 0, feature_sz - j - 1); } if (log_addrs->cec_version >= CEC_OP_CEC_VERSION_2_0) { @@ -1410,6 +1608,11 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, dprintk(1, "cec_receive_notify: %*ph\n", msg->len, msg->msg); + /* If this is a CDC-Only device, then ignore any non-CDC messages */ + if (cec_is_cdc_only(&adap->log_addrs) && + msg->msg[1] != CEC_MSG_CDC_MESSAGE) + return 0; + if (adap->ops->received) { /* Allow drivers to process the message first */ if (adap->ops->received(adap, msg) != -ENOMSG) @@ -1478,7 +1681,8 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, } case CEC_MSG_USER_CONTROL_PRESSED: - if (!(adap->capabilities & CEC_CAP_RC)) + if (!(adap->capabilities & CEC_CAP_RC) || + !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU)) break; #if IS_REACHABLE(CONFIG_RC_CORE) @@ -1515,7 +1719,8 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, break; case CEC_MSG_USER_CONTROL_RELEASED: - if (!(adap->capabilities & CEC_CAP_RC)) + if (!(adap->capabilities & CEC_CAP_RC) || + !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU)) break; #if IS_REACHABLE(CONFIG_RC_CORE) rc_keyup(adap->rc); @@ -1573,8 +1778,8 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, } skip_processing: - /* If this was a reply, then we're done */ - if (is_reply) + /* If this was a reply, then we're done, unless otherwise specified */ + if (is_reply && !(msg->flags & CEC_MSG_FL_REPLY_TO_FOLLOWERS)) return 0; /* diff --git a/drivers/staging/media/cec/cec-api.c b/drivers/media/cec/cec-api.c index e274e2f22398..597fbb62d829 100644 --- a/drivers/staging/media/cec/cec-api.c +++ b/drivers/media/cec/cec-api.c @@ -162,7 +162,9 @@ static long cec_adap_s_log_addrs(struct cec_adapter *adap, struct cec_fh *fh, return -ENOTTY; if (copy_from_user(&log_addrs, parg, sizeof(log_addrs))) return -EFAULT; - log_addrs.flags &= CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK; + log_addrs.flags &= CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK | + CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU | + CEC_LOG_ADDRS_FL_CDC_ONLY; mutex_lock(&adap->lock); if (!adap->is_configuring && (!log_addrs.num_log_addrs || !adap->is_configured) && @@ -189,6 +191,12 @@ static long cec_transmit(struct cec_adapter *adap, struct cec_fh *fh, return -ENOTTY; if (copy_from_user(&msg, parg, sizeof(msg))) return -EFAULT; + + /* A CDC-Only device can only send CDC messages */ + if ((adap->log_addrs.flags & CEC_LOG_ADDRS_FL_CDC_ONLY) && + (msg.len == 1 || msg.msg[1] != CEC_MSG_CDC_MESSAGE)) + return -EINVAL; + mutex_lock(&adap->lock); if (!adap->is_configured) err = -ENONET; @@ -273,6 +281,7 @@ static long cec_receive(struct cec_adapter *adap, struct cec_fh *fh, err = cec_receive_msg(fh, &msg, block); if (err) return err; + msg.flags = 0; if (copy_to_user(parg, &msg, sizeof(msg))) return -EFAULT; return 0; diff --git a/drivers/staging/media/cec/cec-core.c b/drivers/media/cec/cec-core.c index b0137e247dc9..b0137e247dc9 100644 --- a/drivers/staging/media/cec/cec-core.c +++ b/drivers/media/cec/cec-core.c diff --git a/drivers/staging/media/cec/cec-priv.h b/drivers/media/cec/cec-priv.h index 70767a7900f2..70767a7900f2 100644 --- a/drivers/staging/media/cec/cec-priv.h +++ b/drivers/media/cec/cec-priv.h diff --git a/drivers/media/common/b2c2/flexcop-common.h b/drivers/media/common/b2c2/flexcop-common.h index 2b2460e9e6b4..2533574c0cf4 100644 --- a/drivers/media/common/b2c2/flexcop-common.h +++ b/drivers/media/common/b2c2/flexcop-common.h @@ -14,7 +14,6 @@ #include "dmxdev.h" #include "dvb_demux.h" -#include "dvb_filter.h" #include "dvb_net.h" #include "dvb_frontend.h" diff --git a/drivers/media/common/b2c2/flexcop-eeprom.c b/drivers/media/common/b2c2/flexcop-eeprom.c index a25373a9bd84..844c7836c2a6 100644 --- a/drivers/media/common/b2c2/flexcop-eeprom.c +++ b/drivers/media/common/b2c2/flexcop-eeprom.c @@ -136,8 +136,7 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended) if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) { if (extended != 0) { - err("TODO: extended (EUI64) MAC addresses aren't " - "completely supported yet"); + err("TODO: extended (EUI64) MAC addresses aren't completely supported yet"); ret = -EINVAL; } else memcpy(fc->dvb_adapter.proposed_mac,buf,6); diff --git a/drivers/media/common/b2c2/flexcop-i2c.c b/drivers/media/common/b2c2/flexcop-i2c.c index 965d5eb33752..58d39a59fc09 100644 --- a/drivers/media/common/b2c2/flexcop-i2c.c +++ b/drivers/media/common/b2c2/flexcop-i2c.c @@ -33,8 +33,8 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, return -EREMOTEIO; } } - deb_i2c("tried %d times i2c operation, " - "never finished or too many ack errors.\n", i); + deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n", + i); return -EREMOTEIO; } @@ -124,10 +124,10 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, #ifdef DUMP_I2C_MESSAGES printk(KERN_DEBUG "%d ", i2c->port); if (op == FC_READ) - printk("rd("); + printk(KERN_CONT "rd("); else - printk("wr("); - printk("%02x): %02x ", chipaddr, addr); + printk(KERN_CONT "wr("); + printk(KERN_CONT "%02x): %02x ", chipaddr, addr); #endif /* in that case addr is the only value -> @@ -151,7 +151,7 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, #ifdef DUMP_I2C_MESSAGES for (i = 0; i < bytes_to_transfer; i++) - printk("%02x ", buf[i]); + printk(KERN_CONT "%02x ", buf[i]); #endif if (ret < 0) @@ -163,7 +163,7 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, } #ifdef DUMP_I2C_MESSAGES - printk("\n"); + printk(KERN_CONT "\n"); #endif return 0; diff --git a/drivers/media/common/b2c2/flexcop-misc.c b/drivers/media/common/b2c2/flexcop-misc.c index b8eff235367d..bb0d95fe64f9 100644 --- a/drivers/media/common/b2c2/flexcop-misc.c +++ b/drivers/media/common/b2c2/flexcop-misc.c @@ -23,18 +23,15 @@ void flexcop_determine_revision(struct flexcop_device *fc) fc->rev = FLEXCOP_III; break; default: - err("unknown FlexCop Revision: %x. Please report this to " - "linux-dvb@linuxtv.org.", + err("unknown FlexCop Revision: %x. Please report this to linux-dvb@linuxtv.org.", v.misc_204.Rev_N_sig_revision_hi); break; } if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps)) - deb_info("this FlexCop has " - "the additional 32 hardware pid filter.\n"); + deb_info("this FlexCop has the additional 32 hardware pid filter.\n"); else - deb_info("this FlexCop has " - "the 6 basic main hardware pid filter.\n"); + deb_info("this FlexCop has the 6 basic main hardware pid filter.\n"); /* bus parts have to decide if hw pid filtering is used or not. */ } diff --git a/drivers/media/common/b2c2/flexcop.c b/drivers/media/common/b2c2/flexcop.c index 0f5114d406f8..4338ab0043b4 100644 --- a/drivers/media/common/b2c2/flexcop.c +++ b/drivers/media/common/b2c2/flexcop.c @@ -46,8 +46,7 @@ int b2c2_flexcop_debug; EXPORT_SYMBOL_GPL(b2c2_flexcop_debug); module_param_named(debug, b2c2_flexcop_debug, int, 0644); MODULE_PARM_DESC(debug, - "set debug level (1=info,2=tuner,4=i2c,8=ts," - "16=sram,32=reg (|-able))." + "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS); #undef DEBSTATUS diff --git a/drivers/media/common/cx2341x.c b/drivers/media/common/cx2341x.c index 5e4afa0131e6..2725702eda7b 100644 --- a/drivers/media/common/cx2341x.c +++ b/drivers/media/common/cx2341x.c @@ -1190,8 +1190,8 @@ void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix) prefix, cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_TYPE)); if (p->stream_insert_nav_packets) - printk(" (with navigation packets)"); - printk("\n"); + printk(KERN_CONT " (with navigation packets)"); + printk(KERN_CONT "\n"); printk(KERN_INFO "%s: VBI Format: %s\n", prefix, cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_VBI_FMT)); @@ -1209,8 +1209,8 @@ void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix) cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_BITRATE_MODE), p->video_bitrate); if (p->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) - printk(", Peak %d", p->video_bitrate_peak); - printk("\n"); + printk(KERN_CONT ", Peak %d", p->video_bitrate_peak); + printk(KERN_CONT "\n"); printk(KERN_INFO "%s: Video: GOP Size %d, %d B-Frames, %sGOP Closure\n", prefix, @@ -1232,9 +1232,9 @@ void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix) cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_MODE), p->audio_mute ? " (muted)" : ""); if (p->audio_mode == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) - printk(", %s", cx2341x_menu_item(p, + printk(KERN_CONT ", %s", cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_MODE_EXTENSION)); - printk(", %s, %s\n", + printk(KERN_CONT ", %s, %s\n", cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_EMPHASIS), cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_CRC)); diff --git a/drivers/media/common/tveeprom.c b/drivers/media/common/tveeprom.c index 47da0378cad8..e7d0d86f19aa 100644 --- a/drivers/media/common/tveeprom.c +++ b/drivers/media/common/tveeprom.c @@ -28,7 +28,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - #include <linux/module.h> #include <linux/errno.h> #include <linux/kernel.h> @@ -45,22 +44,9 @@ MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver"); MODULE_AUTHOR("John Klar"); MODULE_LICENSE("GPL"); -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debug level (0-1)"); - #define STRM(array, i) \ (i < sizeof(array) / sizeof(char *) ? array[i] : "unknown") -#define tveeprom_info(fmt, arg...) \ - v4l_printk(KERN_INFO, "tveeprom", c->adapter, c->addr, fmt , ## arg) -#define tveeprom_warn(fmt, arg...) \ - v4l_printk(KERN_WARNING, "tveeprom", c->adapter, c->addr, fmt , ## arg) -#define tveeprom_dbg(fmt, arg...) do { \ - if (debug) \ - v4l_printk(KERN_DEBUG, "tveeprom", \ - c->adapter, c->addr, fmt , ## arg); \ - } while (0) /* * The Hauppauge eeprom uses an 8bit field to determine which @@ -510,19 +496,13 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, len = eeprom_data[i] & 0x07; ++i; } else { - tveeprom_warn("Encountered bad packet header [%02x]. " - "Corrupt or not a Hauppauge eeprom.\n", + dev_warn(&c->dev, "Encountered bad packet header [%02x]. Corrupt or not a Hauppauge eeprom.\n", eeprom_data[i]); return; } - if (debug) { - tveeprom_info("Tag [%02x] + %d bytes:", - eeprom_data[i], len - 1); - for (j = 1; j < len; j++) - printk(KERN_CONT " %02x", eeprom_data[i + j]); - printk(KERN_CONT "\n"); - } + dev_dbg(&c->dev, "Tag [%02x] + %d bytes: %*ph\n", + eeprom_data[i], len - 1, len, &eeprom_data[i]); /* process by tag */ tag = eeprom_data[i]; @@ -662,14 +642,14 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, /* case 0x12: tag 'InfoBits' */ default: - tveeprom_dbg("Not sure what to do with tag [%02x]\n", + dev_dbg(&c->dev, "Not sure what to do with tag [%02x]\n", tag); /* dump the rest of the packet? */ } } if (!done) { - tveeprom_warn("Ran out of data!\n"); + dev_warn(&c->dev, "Ran out of data!\n"); return; } @@ -682,8 +662,8 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, } if (hasRadioTuner(tuner1) && !tvee->has_radio) { - tveeprom_info("The eeprom says no radio is present, but the tuner type\n"); - tveeprom_info("indicates otherwise. I will assume that radio is present.\n"); + dev_info(&c->dev, "The eeprom says no radio is present, but the tuner type\n"); + dev_info(&c->dev, "indicates otherwise. I will assume that radio is present.\n"); tvee->has_radio = 1; } @@ -718,46 +698,46 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, } } - tveeprom_info("Hauppauge model %d, rev %s, serial# %u\n", + dev_info(&c->dev, "Hauppauge model %d, rev %s, serial# %u\n", tvee->model, tvee->rev_str, tvee->serial_number); if (tvee->has_MAC_address == 1) - tveeprom_info("MAC address is %pM\n", tvee->MAC_address); - tveeprom_info("tuner model is %s (idx %d, type %d)\n", + dev_info(&c->dev, "MAC address is %pM\n", tvee->MAC_address); + dev_info(&c->dev, "tuner model is %s (idx %d, type %d)\n", t_name1, tuner1, tvee->tuner_type); - tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", + dev_info(&c->dev, "TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2], t_fmt_name1[3], t_fmt_name1[4], t_fmt_name1[5], t_fmt_name1[6], t_fmt_name1[7], t_format1); if (tuner2) - tveeprom_info("second tuner model is %s (idx %d, type %d)\n", + dev_info(&c->dev, "second tuner model is %s (idx %d, type %d)\n", t_name2, tuner2, tvee->tuner2_type); if (t_format2) - tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", + dev_info(&c->dev, "TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2], t_fmt_name2[3], t_fmt_name2[4], t_fmt_name2[5], t_fmt_name2[6], t_fmt_name2[7], t_format2); if (audioic < 0) { - tveeprom_info("audio processor is unknown (no idx)\n"); + dev_info(&c->dev, "audio processor is unknown (no idx)\n"); tvee->audio_processor = TVEEPROM_AUDPROC_OTHER; } else { if (audioic < ARRAY_SIZE(audio_ic)) - tveeprom_info("audio processor is %s (idx %d)\n", + dev_info(&c->dev, "audio processor is %s (idx %d)\n", audio_ic[audioic].name, audioic); else - tveeprom_info("audio processor is unknown (idx %d)\n", + dev_info(&c->dev, "audio processor is unknown (idx %d)\n", audioic); } if (tvee->decoder_processor) - tveeprom_info("decoder processor is %s (idx %d)\n", + dev_info(&c->dev, "decoder processor is %s (idx %d)\n", STRM(decoderIC, tvee->decoder_processor), tvee->decoder_processor); if (tvee->has_ir) - tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n", + dev_info(&c->dev, "has %sradio, has %sIR receiver, has %sIR transmitter\n", tvee->has_radio ? "" : "no ", (tvee->has_ir & 2) ? "" : "no ", (tvee->has_ir & 4) ? "" : "no "); else - tveeprom_info("has %sradio\n", + dev_info(&c->dev, "has %sradio\n", tvee->has_radio ? "" : "no "); } EXPORT_SYMBOL(tveeprom_hauppauge_analog); @@ -773,26 +753,17 @@ int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len) buf = 0; err = i2c_master_send(c, &buf, 1); if (err != 1) { - tveeprom_info("Huh, no eeprom present (err=%d)?\n", err); + dev_info(&c->dev, "Huh, no eeprom present (err=%d)?\n", err); return -1; } err = i2c_master_recv(c, eedata, len); if (err != len) { - tveeprom_warn("i2c eeprom read error (err=%d)\n", err); + dev_warn(&c->dev, "i2c eeprom read error (err=%d)\n", err); return -1; } - if (debug) { - int i; - - tveeprom_info("full 256-byte eeprom dump:\n"); - for (i = 0; i < len; i++) { - if (0 == (i % 16)) - tveeprom_info("%02x:", i); - printk(KERN_CONT " %02x", eedata[i]); - if (15 == (i % 16)) - printk(KERN_CONT "\n"); - } - } + + print_hex_dump_debug("full 256-byte eeprom dump:", DUMP_PREFIX_NONE, + 16, 1, eedata, len, true); return 0; } EXPORT_SYMBOL(tveeprom_read); diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c index 1684810cab83..28d7b072d867 100644 --- a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c +++ b/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c @@ -234,16 +234,18 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) case V4L2_PIX_FMT_XBGR32: case V4L2_PIX_FMT_ARGB32: case V4L2_PIX_FMT_ABGR32: + tpg->color_enc = TGP_COLOR_ENC_RGB; + break; case V4L2_PIX_FMT_GREY: case V4L2_PIX_FMT_Y16: case V4L2_PIX_FMT_Y16_BE: - tpg->is_yuv = false; + tpg->color_enc = TGP_COLOR_ENC_LUMA; break; case V4L2_PIX_FMT_YUV444: case V4L2_PIX_FMT_YUV555: case V4L2_PIX_FMT_YUV565: case V4L2_PIX_FMT_YUV32: - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; break; case V4L2_PIX_FMT_YUV420M: case V4L2_PIX_FMT_YVU420M: @@ -256,7 +258,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) tpg->hdownsampling[1] = 2; tpg->hdownsampling[2] = 2; tpg->planes = 3; - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; break; case V4L2_PIX_FMT_YUV422M: case V4L2_PIX_FMT_YVU422M: @@ -268,7 +270,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) tpg->hdownsampling[1] = 2; tpg->hdownsampling[2] = 2; tpg->planes = 3; - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; break; case V4L2_PIX_FMT_NV16M: case V4L2_PIX_FMT_NV61M: @@ -280,7 +282,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) tpg->hdownsampling[1] = 1; tpg->hmask[1] = ~1; tpg->planes = 2; - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; break; case V4L2_PIX_FMT_NV12M: case V4L2_PIX_FMT_NV21M: @@ -292,7 +294,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) tpg->hdownsampling[1] = 1; tpg->hmask[1] = ~1; tpg->planes = 2; - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; break; case V4L2_PIX_FMT_YUV444M: case V4L2_PIX_FMT_YVU444M: @@ -302,21 +304,25 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) tpg->vdownsampling[2] = 1; tpg->hdownsampling[1] = 1; tpg->hdownsampling[2] = 1; - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; break; case V4L2_PIX_FMT_NV24: case V4L2_PIX_FMT_NV42: tpg->vdownsampling[1] = 1; tpg->hdownsampling[1] = 1; tpg->planes = 2; - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; break; case V4L2_PIX_FMT_YUYV: case V4L2_PIX_FMT_UYVY: case V4L2_PIX_FMT_YVYU: case V4L2_PIX_FMT_VYUY: tpg->hmask[0] = ~1; - tpg->is_yuv = true; + tpg->color_enc = TGP_COLOR_ENC_YCBCR; + break; + case V4L2_PIX_FMT_HSV24: + case V4L2_PIX_FMT_HSV32: + tpg->color_enc = TGP_COLOR_ENC_HSV; break; default: return false; @@ -351,6 +357,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) break; case V4L2_PIX_FMT_RGB24: case V4L2_PIX_FMT_BGR24: + case V4L2_PIX_FMT_HSV24: tpg->twopixelsize[0] = 2 * 3; break; case V4L2_PIX_FMT_BGR666: @@ -361,6 +368,7 @@ bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc) case V4L2_PIX_FMT_ARGB32: case V4L2_PIX_FMT_ABGR32: case V4L2_PIX_FMT_YUV32: + case V4L2_PIX_FMT_HSV32: tpg->twopixelsize[0] = 2 * 4; break; case V4L2_PIX_FMT_NV12: @@ -490,6 +498,71 @@ static inline int linear_to_rec709(int v) return tpg_linear_to_rec709[v]; } +static void color_to_hsv(struct tpg_data *tpg, int r, int g, int b, + int *h, int *s, int *v) +{ + int max_rgb, min_rgb, diff_rgb; + int aux; + int third; + int third_size; + + r >>= 4; + g >>= 4; + b >>= 4; + + /* Value */ + max_rgb = max3(r, g, b); + *v = max_rgb; + if (!max_rgb) { + *h = 0; + *s = 0; + return; + } + + /* Saturation */ + min_rgb = min3(r, g, b); + diff_rgb = max_rgb - min_rgb; + aux = 255 * diff_rgb; + aux += max_rgb / 2; + aux /= max_rgb; + *s = aux; + if (!aux) { + *h = 0; + return; + } + + third_size = (tpg->real_hsv_enc == V4L2_HSV_ENC_180) ? 60 : 85; + + /* Hue */ + if (max_rgb == r) { + aux = g - b; + third = 0; + } else if (max_rgb == g) { + aux = b - r; + third = third_size; + } else { + aux = r - g; + third = third_size * 2; + } + + aux *= third_size / 2; + aux += diff_rgb / 2; + aux /= diff_rgb; + aux += third; + + /* Clamp Hue */ + if (tpg->real_hsv_enc == V4L2_HSV_ENC_180) { + if (aux < 0) + aux += 180; + else if (aux > 180) + aux -= 180; + } else { + aux = aux & 0xff; + } + + *h = aux; +} + static void rgb2ycbcr(const int m[3][3], int r, int g, int b, int y_offset, int *y, int *cb, int *cr) { @@ -729,6 +802,8 @@ static void precalculate_color(struct tpg_data *tpg, int k) int r = tpg_colors[col].r; int g = tpg_colors[col].g; int b = tpg_colors[col].b; + int y, cb, cr; + bool ycbcr_valid = false; if (k == TPG_COLOR_TEXTBG) { col = tpg_get_textbg_color(tpg); @@ -759,9 +834,9 @@ static void precalculate_color(struct tpg_data *tpg, int k) g <<= 4; b <<= 4; } - if (tpg->qual == TPG_QUAL_GRAY || tpg->fourcc == V4L2_PIX_FMT_GREY || - tpg->fourcc == V4L2_PIX_FMT_Y16 || - tpg->fourcc == V4L2_PIX_FMT_Y16_BE) { + + if (tpg->qual == TPG_QUAL_GRAY || + tpg->color_enc == TGP_COLOR_ENC_LUMA) { /* Rec. 709 Luma function */ /* (0.2126, 0.7152, 0.0722) * (255 * 256) */ r = g = b = (13879 * r + 46688 * g + 4713 * b) >> 16; @@ -775,7 +850,8 @@ static void precalculate_color(struct tpg_data *tpg, int k) * Remember that r, g and b are still in the 0 - 0xff0 range. */ if (tpg->real_rgb_range == V4L2_DV_RGB_RANGE_LIMITED && - tpg->rgb_range == V4L2_DV_RGB_RANGE_FULL && !tpg->is_yuv) { + tpg->rgb_range == V4L2_DV_RGB_RANGE_FULL && + tpg->color_enc == TGP_COLOR_ENC_RGB) { /* * Convert from full range (which is what r, g and b are) * to limited range (which is the 'real' RGB range), which @@ -785,7 +861,9 @@ static void precalculate_color(struct tpg_data *tpg, int k) g = (g * 219) / 255 + (16 << 4); b = (b * 219) / 255 + (16 << 4); } else if (tpg->real_rgb_range != V4L2_DV_RGB_RANGE_LIMITED && - tpg->rgb_range == V4L2_DV_RGB_RANGE_LIMITED && !tpg->is_yuv) { + tpg->rgb_range == V4L2_DV_RGB_RANGE_LIMITED && + tpg->color_enc == TGP_COLOR_ENC_RGB) { + /* * Clamp r, g and b to the limited range and convert to full * range since that's what we deliver. @@ -798,10 +876,10 @@ static void precalculate_color(struct tpg_data *tpg, int k) b = (b - (16 << 4)) * 255 / 219; } - if (tpg->brightness != 128 || tpg->contrast != 128 || - tpg->saturation != 128 || tpg->hue) { + if ((tpg->brightness != 128 || tpg->contrast != 128 || + tpg->saturation != 128 || tpg->hue) && + tpg->color_enc != TGP_COLOR_ENC_LUMA) { /* Implement these operations */ - int y, cb, cr; int tmp_cb, tmp_cr; /* First convert to YCbCr */ @@ -818,29 +896,45 @@ static void precalculate_color(struct tpg_data *tpg, int k) cb = (128 << 4) + (tmp_cb * tpg->contrast * tpg->saturation) / (128 * 128); cr = (128 << 4) + (tmp_cr * tpg->contrast * tpg->saturation) / (128 * 128); - if (tpg->is_yuv) { - tpg->colors[k][0] = clamp(y >> 4, 1, 254); - tpg->colors[k][1] = clamp(cb >> 4, 1, 254); - tpg->colors[k][2] = clamp(cr >> 4, 1, 254); - return; - } - ycbcr_to_color(tpg, y, cb, cr, &r, &g, &b); + if (tpg->color_enc == TGP_COLOR_ENC_YCBCR) + ycbcr_valid = true; + else + ycbcr_to_color(tpg, y, cb, cr, &r, &g, &b); + } else if ((tpg->brightness != 128 || tpg->contrast != 128) && + tpg->color_enc == TGP_COLOR_ENC_LUMA) { + r = (16 << 4) + ((r - (16 << 4)) * tpg->contrast) / 128; + r += (tpg->brightness << 4) - (128 << 4); } - if (tpg->is_yuv) { - /* Convert to YCbCr */ - int y, cb, cr; + switch (tpg->color_enc) { + case TGP_COLOR_ENC_HSV: + { + int h, s, v; - color_to_ycbcr(tpg, r, g, b, &y, &cb, &cr); + color_to_hsv(tpg, r, g, b, &h, &s, &v); + tpg->colors[k][0] = h; + tpg->colors[k][1] = s; + tpg->colors[k][2] = v; + break; + } + case TGP_COLOR_ENC_YCBCR: + { + /* Convert to YCbCr */ + if (!ycbcr_valid) + color_to_ycbcr(tpg, r, g, b, &y, &cb, &cr); + y >>= 4; + cb >>= 4; + cr >>= 4; if (tpg->real_quantization == V4L2_QUANTIZATION_LIM_RANGE) { - y = clamp(y, 16 << 4, 235 << 4); - cb = clamp(cb, 16 << 4, 240 << 4); - cr = clamp(cr, 16 << 4, 240 << 4); + y = clamp(y, 16, 235); + cb = clamp(cb, 16, 240); + cr = clamp(cr, 16, 240); + } else { + y = clamp(y, 1, 254); + cb = clamp(cb, 1, 254); + cr = clamp(cr, 1, 254); } - y = clamp(y >> 4, 1, 254); - cb = clamp(cb >> 4, 1, 254); - cr = clamp(cr >> 4, 1, 254); switch (tpg->fourcc) { case V4L2_PIX_FMT_YUV444: y >>= 4; @@ -861,7 +955,15 @@ static void precalculate_color(struct tpg_data *tpg, int k) tpg->colors[k][0] = y; tpg->colors[k][1] = cb; tpg->colors[k][2] = cr; - } else { + break; + } + case TGP_COLOR_ENC_LUMA: + { + tpg->colors[k][0] = r >> 4; + break; + } + case TGP_COLOR_ENC_RGB: + { if (tpg->real_quantization == V4L2_QUANTIZATION_LIM_RANGE) { r = (r * 219) / 255 + (16 << 4); g = (g * 219) / 255 + (16 << 4); @@ -911,6 +1013,8 @@ static void precalculate_color(struct tpg_data *tpg, int k) tpg->colors[k][0] = r; tpg->colors[k][1] = g; tpg->colors[k][2] = b; + break; + } } } @@ -928,7 +1032,7 @@ static void gen_twopix(struct tpg_data *tpg, { unsigned offset = odd * tpg->twopixelsize[0] / 2; u8 alpha = tpg->alpha_component; - u8 r_y, g_u, b_v; + u8 r_y_h, g_u_s, b_v; if (tpg->alpha_red_only && color != TPG_COLOR_CSC_RED && color != TPG_COLOR_100_RED && @@ -936,161 +1040,161 @@ static void gen_twopix(struct tpg_data *tpg, alpha = 0; if (color == TPG_COLOR_RANDOM) precalculate_color(tpg, color); - r_y = tpg->colors[color][0]; /* R or precalculated Y */ - g_u = tpg->colors[color][1]; /* G or precalculated U */ + r_y_h = tpg->colors[color][0]; /* R or precalculated Y, H */ + g_u_s = tpg->colors[color][1]; /* G or precalculated U, V */ b_v = tpg->colors[color][2]; /* B or precalculated V */ switch (tpg->fourcc) { case V4L2_PIX_FMT_GREY: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; break; case V4L2_PIX_FMT_Y16: /* - * Ideally both bytes should be set to r_y, but then you won't + * Ideally both bytes should be set to r_y_h, but then you won't * be able to detect endian problems. So keep it 0 except for - * the corner case where r_y is 0xff so white really will be + * the corner case where r_y_h is 0xff so white really will be * white (0xffff). */ - buf[0][offset] = r_y == 0xff ? r_y : 0; - buf[0][offset+1] = r_y; + buf[0][offset] = r_y_h == 0xff ? r_y_h : 0; + buf[0][offset+1] = r_y_h; break; case V4L2_PIX_FMT_Y16_BE: /* See comment for V4L2_PIX_FMT_Y16 above */ - buf[0][offset] = r_y; - buf[0][offset+1] = r_y == 0xff ? r_y : 0; + buf[0][offset] = r_y_h; + buf[0][offset+1] = r_y_h == 0xff ? r_y_h : 0; break; case V4L2_PIX_FMT_YUV422M: case V4L2_PIX_FMT_YUV422P: case V4L2_PIX_FMT_YUV420: case V4L2_PIX_FMT_YUV420M: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; if (odd) { - buf[1][0] = (buf[1][0] + g_u) / 2; + buf[1][0] = (buf[1][0] + g_u_s) / 2; buf[2][0] = (buf[2][0] + b_v) / 2; buf[1][1] = buf[1][0]; buf[2][1] = buf[2][0]; break; } - buf[1][0] = g_u; + buf[1][0] = g_u_s; buf[2][0] = b_v; break; case V4L2_PIX_FMT_YVU422M: case V4L2_PIX_FMT_YVU420: case V4L2_PIX_FMT_YVU420M: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; if (odd) { buf[1][0] = (buf[1][0] + b_v) / 2; - buf[2][0] = (buf[2][0] + g_u) / 2; + buf[2][0] = (buf[2][0] + g_u_s) / 2; buf[1][1] = buf[1][0]; buf[2][1] = buf[2][0]; break; } buf[1][0] = b_v; - buf[2][0] = g_u; + buf[2][0] = g_u_s; break; case V4L2_PIX_FMT_NV12: case V4L2_PIX_FMT_NV12M: case V4L2_PIX_FMT_NV16: case V4L2_PIX_FMT_NV16M: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; if (odd) { - buf[1][0] = (buf[1][0] + g_u) / 2; + buf[1][0] = (buf[1][0] + g_u_s) / 2; buf[1][1] = (buf[1][1] + b_v) / 2; break; } - buf[1][0] = g_u; + buf[1][0] = g_u_s; buf[1][1] = b_v; break; case V4L2_PIX_FMT_NV21: case V4L2_PIX_FMT_NV21M: case V4L2_PIX_FMT_NV61: case V4L2_PIX_FMT_NV61M: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; if (odd) { buf[1][0] = (buf[1][0] + b_v) / 2; - buf[1][1] = (buf[1][1] + g_u) / 2; + buf[1][1] = (buf[1][1] + g_u_s) / 2; break; } buf[1][0] = b_v; - buf[1][1] = g_u; + buf[1][1] = g_u_s; break; case V4L2_PIX_FMT_YUV444M: - buf[0][offset] = r_y; - buf[1][offset] = g_u; + buf[0][offset] = r_y_h; + buf[1][offset] = g_u_s; buf[2][offset] = b_v; break; case V4L2_PIX_FMT_YVU444M: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; buf[1][offset] = b_v; - buf[2][offset] = g_u; + buf[2][offset] = g_u_s; break; case V4L2_PIX_FMT_NV24: - buf[0][offset] = r_y; - buf[1][2 * offset] = g_u; + buf[0][offset] = r_y_h; + buf[1][2 * offset] = g_u_s; buf[1][2 * offset + 1] = b_v; break; case V4L2_PIX_FMT_NV42: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; buf[1][2 * offset] = b_v; - buf[1][2 * offset + 1] = g_u; + buf[1][2 * offset + 1] = g_u_s; break; case V4L2_PIX_FMT_YUYV: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; if (odd) { - buf[0][1] = (buf[0][1] + g_u) / 2; + buf[0][1] = (buf[0][1] + g_u_s) / 2; buf[0][3] = (buf[0][3] + b_v) / 2; break; } - buf[0][1] = g_u; + buf[0][1] = g_u_s; buf[0][3] = b_v; break; case V4L2_PIX_FMT_UYVY: - buf[0][offset + 1] = r_y; + buf[0][offset + 1] = r_y_h; if (odd) { - buf[0][0] = (buf[0][0] + g_u) / 2; + buf[0][0] = (buf[0][0] + g_u_s) / 2; buf[0][2] = (buf[0][2] + b_v) / 2; break; } - buf[0][0] = g_u; + buf[0][0] = g_u_s; buf[0][2] = b_v; break; case V4L2_PIX_FMT_YVYU: - buf[0][offset] = r_y; + buf[0][offset] = r_y_h; if (odd) { buf[0][1] = (buf[0][1] + b_v) / 2; - buf[0][3] = (buf[0][3] + g_u) / 2; + buf[0][3] = (buf[0][3] + g_u_s) / 2; break; } buf[0][1] = b_v; - buf[0][3] = g_u; + buf[0][3] = g_u_s; break; case V4L2_PIX_FMT_VYUY: - buf[0][offset + 1] = r_y; + buf[0][offset + 1] = r_y_h; if (odd) { buf[0][0] = (buf[0][0] + b_v) / 2; - buf[0][2] = (buf[0][2] + g_u) / 2; + buf[0][2] = (buf[0][2] + g_u_s) / 2; break; } buf[0][0] = b_v; - buf[0][2] = g_u; + buf[0][2] = g_u_s; break; case V4L2_PIX_FMT_RGB332: - buf[0][offset] = (r_y << 5) | (g_u << 2) | b_v; + buf[0][offset] = (r_y_h << 5) | (g_u_s << 2) | b_v; break; case V4L2_PIX_FMT_YUV565: case V4L2_PIX_FMT_RGB565: - buf[0][offset] = (g_u << 5) | b_v; - buf[0][offset + 1] = (r_y << 3) | (g_u >> 3); + buf[0][offset] = (g_u_s << 5) | b_v; + buf[0][offset + 1] = (r_y_h << 3) | (g_u_s >> 3); break; case V4L2_PIX_FMT_RGB565X: - buf[0][offset] = (r_y << 3) | (g_u >> 3); - buf[0][offset + 1] = (g_u << 5) | b_v; + buf[0][offset] = (r_y_h << 3) | (g_u_s >> 3); + buf[0][offset + 1] = (g_u_s << 5) | b_v; break; case V4L2_PIX_FMT_RGB444: case V4L2_PIX_FMT_XRGB444: @@ -1098,8 +1202,8 @@ static void gen_twopix(struct tpg_data *tpg, /* fall through */ case V4L2_PIX_FMT_YUV444: case V4L2_PIX_FMT_ARGB444: - buf[0][offset] = (g_u << 4) | b_v; - buf[0][offset + 1] = (alpha & 0xf0) | r_y; + buf[0][offset] = (g_u_s << 4) | b_v; + buf[0][offset + 1] = (alpha & 0xf0) | r_y_h; break; case V4L2_PIX_FMT_RGB555: case V4L2_PIX_FMT_XRGB555: @@ -1107,42 +1211,45 @@ static void gen_twopix(struct tpg_data *tpg, /* fall through */ case V4L2_PIX_FMT_YUV555: case V4L2_PIX_FMT_ARGB555: - buf[0][offset] = (g_u << 5) | b_v; - buf[0][offset + 1] = (alpha & 0x80) | (r_y << 2) | (g_u >> 3); + buf[0][offset] = (g_u_s << 5) | b_v; + buf[0][offset + 1] = (alpha & 0x80) | (r_y_h << 2) + | (g_u_s >> 3); break; case V4L2_PIX_FMT_RGB555X: case V4L2_PIX_FMT_XRGB555X: alpha = 0; /* fall through */ case V4L2_PIX_FMT_ARGB555X: - buf[0][offset] = (alpha & 0x80) | (r_y << 2) | (g_u >> 3); - buf[0][offset + 1] = (g_u << 5) | b_v; + buf[0][offset] = (alpha & 0x80) | (r_y_h << 2) | (g_u_s >> 3); + buf[0][offset + 1] = (g_u_s << 5) | b_v; break; case V4L2_PIX_FMT_RGB24: - buf[0][offset] = r_y; - buf[0][offset + 1] = g_u; + case V4L2_PIX_FMT_HSV24: + buf[0][offset] = r_y_h; + buf[0][offset + 1] = g_u_s; buf[0][offset + 2] = b_v; break; case V4L2_PIX_FMT_BGR24: buf[0][offset] = b_v; - buf[0][offset + 1] = g_u; - buf[0][offset + 2] = r_y; + buf[0][offset + 1] = g_u_s; + buf[0][offset + 2] = r_y_h; break; case V4L2_PIX_FMT_BGR666: - buf[0][offset] = (b_v << 2) | (g_u >> 4); - buf[0][offset + 1] = (g_u << 4) | (r_y >> 2); - buf[0][offset + 2] = r_y << 6; + buf[0][offset] = (b_v << 2) | (g_u_s >> 4); + buf[0][offset + 1] = (g_u_s << 4) | (r_y_h >> 2); + buf[0][offset + 2] = r_y_h << 6; buf[0][offset + 3] = 0; break; case V4L2_PIX_FMT_RGB32: case V4L2_PIX_FMT_XRGB32: + case V4L2_PIX_FMT_HSV32: alpha = 0; /* fall through */ case V4L2_PIX_FMT_YUV32: case V4L2_PIX_FMT_ARGB32: buf[0][offset] = alpha; - buf[0][offset + 1] = r_y; - buf[0][offset + 2] = g_u; + buf[0][offset + 1] = r_y_h; + buf[0][offset + 2] = g_u_s; buf[0][offset + 3] = b_v; break; case V4L2_PIX_FMT_BGR32: @@ -1151,87 +1258,87 @@ static void gen_twopix(struct tpg_data *tpg, /* fall through */ case V4L2_PIX_FMT_ABGR32: buf[0][offset] = b_v; - buf[0][offset + 1] = g_u; - buf[0][offset + 2] = r_y; + buf[0][offset + 1] = g_u_s; + buf[0][offset + 2] = r_y_h; buf[0][offset + 3] = alpha; break; case V4L2_PIX_FMT_SBGGR8: - buf[0][offset] = odd ? g_u : b_v; - buf[1][offset] = odd ? r_y : g_u; + buf[0][offset] = odd ? g_u_s : b_v; + buf[1][offset] = odd ? r_y_h : g_u_s; break; case V4L2_PIX_FMT_SGBRG8: - buf[0][offset] = odd ? b_v : g_u; - buf[1][offset] = odd ? g_u : r_y; + buf[0][offset] = odd ? b_v : g_u_s; + buf[1][offset] = odd ? g_u_s : r_y_h; break; case V4L2_PIX_FMT_SGRBG8: - buf[0][offset] = odd ? r_y : g_u; - buf[1][offset] = odd ? g_u : b_v; + buf[0][offset] = odd ? r_y_h : g_u_s; + buf[1][offset] = odd ? g_u_s : b_v; break; case V4L2_PIX_FMT_SRGGB8: - buf[0][offset] = odd ? g_u : r_y; - buf[1][offset] = odd ? b_v : g_u; + buf[0][offset] = odd ? g_u_s : r_y_h; + buf[1][offset] = odd ? b_v : g_u_s; break; case V4L2_PIX_FMT_SBGGR10: - buf[0][offset] = odd ? g_u << 2 : b_v << 2; - buf[0][offset + 1] = odd ? g_u >> 6 : b_v >> 6; - buf[1][offset] = odd ? r_y << 2 : g_u << 2; - buf[1][offset + 1] = odd ? r_y >> 6 : g_u >> 6; + buf[0][offset] = odd ? g_u_s << 2 : b_v << 2; + buf[0][offset + 1] = odd ? g_u_s >> 6 : b_v >> 6; + buf[1][offset] = odd ? r_y_h << 2 : g_u_s << 2; + buf[1][offset + 1] = odd ? r_y_h >> 6 : g_u_s >> 6; buf[0][offset] |= (buf[0][offset] >> 2) & 3; buf[1][offset] |= (buf[1][offset] >> 2) & 3; break; case V4L2_PIX_FMT_SGBRG10: - buf[0][offset] = odd ? b_v << 2 : g_u << 2; - buf[0][offset + 1] = odd ? b_v >> 6 : g_u >> 6; - buf[1][offset] = odd ? g_u << 2 : r_y << 2; - buf[1][offset + 1] = odd ? g_u >> 6 : r_y >> 6; + buf[0][offset] = odd ? b_v << 2 : g_u_s << 2; + buf[0][offset + 1] = odd ? b_v >> 6 : g_u_s >> 6; + buf[1][offset] = odd ? g_u_s << 2 : r_y_h << 2; + buf[1][offset + 1] = odd ? g_u_s >> 6 : r_y_h >> 6; buf[0][offset] |= (buf[0][offset] >> 2) & 3; buf[1][offset] |= (buf[1][offset] >> 2) & 3; break; case V4L2_PIX_FMT_SGRBG10: - buf[0][offset] = odd ? r_y << 2 : g_u << 2; - buf[0][offset + 1] = odd ? r_y >> 6 : g_u >> 6; - buf[1][offset] = odd ? g_u << 2 : b_v << 2; - buf[1][offset + 1] = odd ? g_u >> 6 : b_v >> 6; + buf[0][offset] = odd ? r_y_h << 2 : g_u_s << 2; + buf[0][offset + 1] = odd ? r_y_h >> 6 : g_u_s >> 6; + buf[1][offset] = odd ? g_u_s << 2 : b_v << 2; + buf[1][offset + 1] = odd ? g_u_s >> 6 : b_v >> 6; buf[0][offset] |= (buf[0][offset] >> 2) & 3; buf[1][offset] |= (buf[1][offset] >> 2) & 3; break; case V4L2_PIX_FMT_SRGGB10: - buf[0][offset] = odd ? g_u << 2 : r_y << 2; - buf[0][offset + 1] = odd ? g_u >> 6 : r_y >> 6; - buf[1][offset] = odd ? b_v << 2 : g_u << 2; - buf[1][offset + 1] = odd ? b_v >> 6 : g_u >> 6; + buf[0][offset] = odd ? g_u_s << 2 : r_y_h << 2; + buf[0][offset + 1] = odd ? g_u_s >> 6 : r_y_h >> 6; + buf[1][offset] = odd ? b_v << 2 : g_u_s << 2; + buf[1][offset + 1] = odd ? b_v >> 6 : g_u_s >> 6; buf[0][offset] |= (buf[0][offset] >> 2) & 3; buf[1][offset] |= (buf[1][offset] >> 2) & 3; break; case V4L2_PIX_FMT_SBGGR12: - buf[0][offset] = odd ? g_u << 4 : b_v << 4; - buf[0][offset + 1] = odd ? g_u >> 4 : b_v >> 4; - buf[1][offset] = odd ? r_y << 4 : g_u << 4; - buf[1][offset + 1] = odd ? r_y >> 4 : g_u >> 4; + buf[0][offset] = odd ? g_u_s << 4 : b_v << 4; + buf[0][offset + 1] = odd ? g_u_s >> 4 : b_v >> 4; + buf[1][offset] = odd ? r_y_h << 4 : g_u_s << 4; + buf[1][offset + 1] = odd ? r_y_h >> 4 : g_u_s >> 4; buf[0][offset] |= (buf[0][offset] >> 4) & 0xf; buf[1][offset] |= (buf[1][offset] >> 4) & 0xf; break; case V4L2_PIX_FMT_SGBRG12: - buf[0][offset] = odd ? b_v << 4 : g_u << 4; - buf[0][offset + 1] = odd ? b_v >> 4 : g_u >> 4; - buf[1][offset] = odd ? g_u << 4 : r_y << 4; - buf[1][offset + 1] = odd ? g_u >> 4 : r_y >> 4; + buf[0][offset] = odd ? b_v << 4 : g_u_s << 4; + buf[0][offset + 1] = odd ? b_v >> 4 : g_u_s >> 4; + buf[1][offset] = odd ? g_u_s << 4 : r_y_h << 4; + buf[1][offset + 1] = odd ? g_u_s >> 4 : r_y_h >> 4; buf[0][offset] |= (buf[0][offset] >> 4) & 0xf; buf[1][offset] |= (buf[1][offset] >> 4) & 0xf; break; case V4L2_PIX_FMT_SGRBG12: - buf[0][offset] = odd ? r_y << 4 : g_u << 4; - buf[0][offset + 1] = odd ? r_y >> 4 : g_u >> 4; - buf[1][offset] = odd ? g_u << 4 : b_v << 4; - buf[1][offset + 1] = odd ? g_u >> 4 : b_v >> 4; + buf[0][offset] = odd ? r_y_h << 4 : g_u_s << 4; + buf[0][offset + 1] = odd ? r_y_h >> 4 : g_u_s >> 4; + buf[1][offset] = odd ? g_u_s << 4 : b_v << 4; + buf[1][offset + 1] = odd ? g_u_s >> 4 : b_v >> 4; buf[0][offset] |= (buf[0][offset] >> 4) & 0xf; buf[1][offset] |= (buf[1][offset] >> 4) & 0xf; break; case V4L2_PIX_FMT_SRGGB12: - buf[0][offset] = odd ? g_u << 4 : r_y << 4; - buf[0][offset + 1] = odd ? g_u >> 4 : r_y >> 4; - buf[1][offset] = odd ? b_v << 4 : g_u << 4; - buf[1][offset + 1] = odd ? b_v >> 4 : g_u >> 4; + buf[0][offset] = odd ? g_u_s << 4 : r_y_h << 4; + buf[0][offset + 1] = odd ? g_u_s >> 4 : r_y_h >> 4; + buf[1][offset] = odd ? b_v << 4 : g_u_s << 4; + buf[1][offset + 1] = odd ? b_v >> 4 : g_u_s >> 4; buf[0][offset] |= (buf[0][offset] >> 4) & 0xf; buf[1][offset] |= (buf[1][offset] >> 4) & 0xf; break; @@ -1828,6 +1935,7 @@ static void tpg_recalc(struct tpg_data *tpg) tpg->recalc_lines = true; tpg->real_xfer_func = tpg->xfer_func; tpg->real_ycbcr_enc = tpg->ycbcr_enc; + tpg->real_hsv_enc = tpg->hsv_enc; tpg->real_quantization = tpg->quantization; if (tpg->xfer_func == V4L2_XFER_FUNC_DEFAULT) @@ -1840,7 +1948,8 @@ static void tpg_recalc(struct tpg_data *tpg) if (tpg->quantization == V4L2_QUANTIZATION_DEFAULT) tpg->real_quantization = - V4L2_MAP_QUANTIZATION_DEFAULT(!tpg->is_yuv, + V4L2_MAP_QUANTIZATION_DEFAULT( + tpg->color_enc != TGP_COLOR_ENC_YCBCR, tpg->colorspace, tpg->real_ycbcr_enc); tpg_precalculate_colors(tpg); @@ -1887,11 +1996,28 @@ static int tpg_pattern_avg(const struct tpg_data *tpg, return -1; } +static const char *tpg_color_enc_str(enum tgp_color_enc + color_enc) +{ + switch (color_enc) { + case TGP_COLOR_ENC_HSV: + return "HSV"; + case TGP_COLOR_ENC_YCBCR: + return "Y'CbCr"; + case TGP_COLOR_ENC_LUMA: + return "Luma"; + case TGP_COLOR_ENC_RGB: + default: + return "R'G'B"; + + } +} + void tpg_log_status(struct tpg_data *tpg) { pr_info("tpg source WxH: %ux%u (%s)\n", - tpg->src_width, tpg->src_height, - tpg->is_yuv ? "YCbCr" : "RGB"); + tpg->src_width, tpg->src_height, + tpg_color_enc_str(tpg->color_enc)); pr_info("tpg field: %u\n", tpg->field); pr_info("tpg crop: %ux%u@%dx%d\n", tpg->crop.width, tpg->crop.height, tpg->crop.left, tpg->crop.top); @@ -1900,6 +2026,7 @@ void tpg_log_status(struct tpg_data *tpg) pr_info("tpg colorspace: %d\n", tpg->colorspace); pr_info("tpg transfer function: %d/%d\n", tpg->xfer_func, tpg->real_xfer_func); pr_info("tpg Y'CbCr encoding: %d/%d\n", tpg->ycbcr_enc, tpg->real_ycbcr_enc); + pr_info("tpg HSV encoding: %d/%d\n", tpg->hsv_enc, tpg->real_hsv_enc); pr_info("tpg quantization: %d/%d\n", tpg->quantization, tpg->real_quantization); pr_info("tpg RGB range: %d/%d\n", tpg->rgb_range, tpg->real_rgb_range); } diff --git a/drivers/media/dvb-core/Kconfig b/drivers/media/dvb-core/Kconfig index fa7a2490ed5f..8964f1d3cf57 100644 --- a/drivers/media/dvb-core/Kconfig +++ b/drivers/media/dvb-core/Kconfig @@ -27,3 +27,16 @@ config DVB_DYNAMIC_MINORS will be required to manage the device nodes. If you are unsure about this, say N here. + +config DVB_DEMUX_SECTION_LOSS_LOG + bool "Enable DVB demux section packet loss log" + depends on DVB_CORE + default n + help + Enable extra log messages meant to detect packet loss + inside the Kernel. + + Should not be enabled on normal cases, as logs can + be very verbose. + + If you are unsure about this, say N here. diff --git a/drivers/media/dvb-core/Makefile b/drivers/media/dvb-core/Makefile index 8f22bcd7c1f9..281bc89576e6 100644 --- a/drivers/media/dvb-core/Makefile +++ b/drivers/media/dvb-core/Makefile @@ -4,7 +4,7 @@ dvb-net-$(CONFIG_DVB_NET) := dvb_net.o -dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ +dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o \ dvb_ca_en50221.o dvb_frontend.o \ $(dvb-net-y) dvb_ringbuffer.o dvb_math.o diff --git a/drivers/media/dvb-core/demux.h b/drivers/media/dvb-core/demux.h index aeda2b64931c..f8adf4506a45 100644 --- a/drivers/media/dvb-core/demux.h +++ b/drivers/media/dvb-core/demux.h @@ -103,7 +103,6 @@ struct dmx_ts_feed { u16 pid, int type, enum dmx_ts_pes pes_type, - size_t circular_buffer_size, ktime_t timeout); int (*start_filtering)(struct dmx_ts_feed *feed); int (*stop_filtering)(struct dmx_ts_feed *feed); @@ -181,7 +180,6 @@ struct dmx_section_feed { /* public: */ int (*set)(struct dmx_section_feed *feed, u16 pid, - size_t circular_buffer_size, int check_crc); int (*allocate_filter)(struct dmx_section_feed *feed, struct dmx_section_filter **filter); @@ -206,8 +204,7 @@ struct dmx_section_feed { * the &dmx_demux. * Any TS packets that match the filter settings are copied to a circular * buffer. The filtered TS packets are delivered to the client using this - * callback function. The size of the circular buffer is controlled by the - * circular_buffer_size parameter of the &dmx_ts_feed.@set function. + * callback function. * It is expected that the @buffer1 and @buffer2 callback parameters point to * addresses within the circular buffer, but other implementations are also * possible. Note that the called party should not try to free the memory diff --git a/drivers/media/dvb-core/dmxdev.c b/drivers/media/dvb-core/dmxdev.c index 7b67e1dd97fd..efe55a3e80d0 100644 --- a/drivers/media/dvb-core/dmxdev.c +++ b/drivers/media/dvb-core/dmxdev.c @@ -20,6 +20,8 @@ * */ +#define pr_fmt(fmt) "dmxdev: " fmt + #include <linux/sched.h> #include <linux/spinlock.h> #include <linux/slab.h> @@ -36,7 +38,11 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); -#define dprintk if (debug) printk +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) static int dvb_dmxdev_buffer_write(struct dvb_ringbuffer *buf, const u8 *src, size_t len) @@ -50,7 +56,7 @@ static int dvb_dmxdev_buffer_write(struct dvb_ringbuffer *buf, free = dvb_ringbuffer_free(buf); if (len > free) { - dprintk("dmxdev: buffer overflow\n"); + dprintk("buffer overflow\n"); return -EOVERFLOW; } @@ -126,7 +132,7 @@ static int dvb_dvr_open(struct inode *inode, struct file *file) struct dmxdev *dmxdev = dvbdev->priv; struct dmx_frontend *front; - dprintk("function : %s\n", __func__); + dprintk("%s\n", __func__); if (mutex_lock_interruptible(&dmxdev->mutex)) return -ERESTARTSYS; @@ -258,7 +264,7 @@ static int dvb_dvr_set_buffer_size(struct dmxdev *dmxdev, void *newmem; void *oldmem; - dprintk("function : %s\n", __func__); + dprintk("%s\n", __func__); if (buf->size == size) return 0; @@ -367,7 +373,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, return 0; } del_timer(&dmxdevfilter->timer); - dprintk("dmxdev: section callback %*ph\n", 6, buffer1); + dprintk("section callback %*ph\n", 6, buffer1); ret = dvb_dmxdev_buffer_write(&dmxdevfilter->buffer, buffer1, buffer1_len); if (ret == buffer1_len) { @@ -589,7 +595,7 @@ static int dvb_dmxdev_start_feed(struct dmxdev *dmxdev, tsfeed = feed->ts; tsfeed->priv = filter; - ret = tsfeed->set(tsfeed, feed->pid, ts_type, ts_pes, 32768, timeout); + ret = tsfeed->set(tsfeed, feed->pid, ts_type, ts_pes, timeout); if (ret < 0) { dmxdev->demux->release_ts_feed(dmxdev->demux, tsfeed); return ret; @@ -655,15 +661,15 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) secfeed, dvb_dmxdev_section_callback); if (ret < 0) { - printk("DVB (%s): could not alloc feed\n", + pr_err("DVB (%s): could not alloc feed\n", __func__); return ret; } - ret = (*secfeed)->set(*secfeed, para->pid, 32768, + ret = (*secfeed)->set(*secfeed, para->pid, (para->flags & DMX_CHECK_CRC) ? 1 : 0); if (ret < 0) { - printk("DVB (%s): could not set feed\n", + pr_err("DVB (%s): could not set feed\n", __func__); dvb_dmxdev_feed_restart(filter); return ret; @@ -844,7 +850,7 @@ static int dvb_dmxdev_filter_set(struct dmxdev *dmxdev, struct dmxdev_filter *dmxdevfilter, struct dmx_sct_filter_params *params) { - dprintk("function : %s, PID=0x%04x, flags=%02x, timeout=%d\n", + dprintk("%s: PID=0x%04x, flags=%02x, timeout=%d\n", __func__, params->pid, params->flags, params->timeout); dvb_dmxdev_filter_stop(dmxdevfilter); @@ -1184,7 +1190,7 @@ static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait) struct dmxdev *dmxdev = dvbdev->priv; unsigned int mask = 0; - dprintk("function : %s\n", __func__); + dprintk("%s\n", __func__); if (dmxdev->exit) return POLLERR; diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h index a7a4674ccc40..779f4224b63e 100644 --- a/drivers/media/dvb-core/dvb-usb-ids.h +++ b/drivers/media/dvb-core/dvb-usb-ids.h @@ -262,6 +262,7 @@ #define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI 0x3012 #define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI_2 0x3015 #define USB_PID_TECHNOTREND_TVSTICK_CT2_4400 0x3014 +#define USB_PID_TECHNOTREND_CONNECT_S2_4650_CI 0x3017 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 @@ -411,4 +412,5 @@ #define USB_PID_SVEON_STV27 0xd3af #define USB_PID_TURBOX_DTT_2000 0xd3a4 #define USB_PID_WINTV_SOLOHD 0x0264 +#define USB_PID_EVOLVEO_XTRATV_STICK 0xa115 #endif diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c index b5b5b195ea7f..262a492e7c08 100644 --- a/drivers/media/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb-core/dvb_ca_en50221.c @@ -28,6 +28,8 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html */ +#define pr_fmt(fmt) "dvb_ca_en50221: " fmt + #include <linux/errno.h> #include <linux/slab.h> #include <linux/list.h> @@ -46,7 +48,10 @@ static int dvb_ca_en50221_debug; module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644); MODULE_PARM_DESC(cam_debug, "enable verbose debug messages"); -#define dprintk if (dvb_ca_en50221_debug) printk +#define dprintk(fmt, arg...) do { \ + if (dvb_ca_en50221_debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg);\ +} while (0) #define INIT_TIMEOUT_SECS 10 @@ -298,7 +303,8 @@ static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, /* if we got the flags, it was successful! */ if (res & waitfor) { - dprintk("%s succeeded timeout:%lu\n", __func__, jiffies - start); + dprintk("%s succeeded timeout:%lu\n", + __func__, jiffies - start); return 0; } @@ -519,8 +525,9 @@ static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot) /* is it a version we support? */ if (strncmp(dvb_str + 8, "1.00", 4)) { - printk("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n", - ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], dvb_str[10], dvb_str[11]); + pr_err("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n", + ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], + dvb_str[10], dvb_str[11]); return -EINVAL; } @@ -557,8 +564,8 @@ static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot) break; default: /* Unknown tuple type - just skip this tuple and move to the next one */ - dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", tupleType, - tupleLength); + dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", + tupleType, tupleLength); break; } } @@ -567,7 +574,8 @@ static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot) return -EINVAL; dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n", - manfid, devid, ca->slot_info[slot].config_base, ca->slot_info[slot].config_option); + manfid, devid, ca->slot_info[slot].config_base, + ca->slot_info[slot].config_option); // success! return 0; @@ -661,14 +669,15 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * eb /* check it will fit */ if (ebuf == NULL) { if (bytes_read > ca->slot_info[slot].link_buf_size) { - printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n", - ca->dvbdev->adapter->num, bytes_read, ca->slot_info[slot].link_buf_size); + pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n", + ca->dvbdev->adapter->num, bytes_read, + ca->slot_info[slot].link_buf_size); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; status = -EIO; goto exit; } if (bytes_read < 2) { - printk("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n", + pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; status = -EIO; @@ -676,7 +685,7 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * eb } } else { if (bytes_read > ecount) { - printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n", + pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n", ca->dvbdev->adapter->num); status = -EIO; goto exit; @@ -1062,7 +1071,7 @@ static int dvb_ca_en50221_thread(void *data) case DVB_CA_SLOTSTATE_WAITREADY: if (time_after(jiffies, ca->slot_info[slot].timeout)) { - printk("dvb_ca adaptor %d: PC card did not respond :(\n", + pr_err("dvb_ca adaptor %d: PC card did not respond :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); @@ -1084,14 +1093,14 @@ static int dvb_ca_en50221_thread(void *data) } } - printk("dvb_ca adapter %d: Invalid PC card inserted :(\n", + pr_err("dvb_ca adapter %d: Invalid PC card inserted :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } if (dvb_ca_en50221_set_configoption(ca, slot) != 0) { - printk("dvb_ca adapter %d: Unable to initialise CAM :(\n", + pr_err("dvb_ca adapter %d: Unable to initialise CAM :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); @@ -1099,7 +1108,7 @@ static int dvb_ca_en50221_thread(void *data) } if (ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, CMDREG_RS) != 0) { - printk("dvb_ca adapter %d: Unable to reset CAM IF\n", + pr_err("dvb_ca adapter %d: Unable to reset CAM IF\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); @@ -1114,7 +1123,7 @@ static int dvb_ca_en50221_thread(void *data) case DVB_CA_SLOTSTATE_WAITFR: if (time_after(jiffies, ca->slot_info[slot].timeout)) { - printk("dvb_ca adapter %d: DVB CAM did not respond :(\n", + pr_err("dvb_ca adapter %d: DVB CAM did not respond :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); @@ -1141,7 +1150,8 @@ static int dvb_ca_en50221_thread(void *data) } } - printk("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", ca->dvbdev->adapter->num); + pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", + ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; @@ -1150,7 +1160,8 @@ static int dvb_ca_en50221_thread(void *data) if (ca->slot_info[slot].rx_buffer.data == NULL) { rxbuf = vmalloc(RX_BUFFER_SIZE); if (rxbuf == NULL) { - printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num); + pr_err("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", + ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; @@ -1161,7 +1172,8 @@ static int dvb_ca_en50221_thread(void *data) ca->pub->slot_ts_enable(ca->pub, slot); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING; dvb_ca_en50221_thread_update_delay(ca); - printk("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", ca->dvbdev->adapter->num); + pr_err("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", + ca->dvbdev->adapter->num); break; case DVB_CA_SLOTSTATE_RUNNING: @@ -1497,7 +1509,8 @@ static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf, pktlen = 2; do { if (idx == -1) { - printk("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", ca->dvbdev->adapter->num); + pr_err("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", + ca->dvbdev->adapter->num); status = -EIO; goto exit; } @@ -1755,8 +1768,8 @@ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, ca->dvbdev->adapter->num, ca->dvbdev->id); if (IS_ERR(ca->thread)) { ret = PTR_ERR(ca->thread); - printk("dvb_ca_init: failed to start kernel_thread (%d)\n", - ret); + pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n", + ret); goto unregister_device; } return 0; diff --git a/drivers/media/dvb-core/dvb_demux.c b/drivers/media/dvb-core/dvb_demux.c index a0cf7b0d03e8..3ad0b2cd26b1 100644 --- a/drivers/media/dvb-core/dvb_demux.c +++ b/drivers/media/dvb-core/dvb_demux.c @@ -21,6 +21,8 @@ * */ +#define pr_fmt(fmt) "dvb_demux: " fmt + #include <linux/sched.h> #include <linux/spinlock.h> #include <linux/slab.h> @@ -34,12 +36,6 @@ #include "dvb_demux.h" -#define NOBUFS -/* -** #define DVB_DEMUX_SECTION_LOSS_LOG to monitor payload loss in the syslog -*/ -// #define DVB_DEMUX_SECTION_LOSS_LOG - static int dvb_demux_tscheck; module_param(dvb_demux_tscheck, int, 0644); MODULE_PARM_DESC(dvb_demux_tscheck, @@ -55,10 +51,13 @@ module_param(dvb_demux_feed_err_pkts, int, 0644); MODULE_PARM_DESC(dvb_demux_feed_err_pkts, "when set to 0, drop packets with the TEI bit set (1 by default)"); -#define dprintk_tscheck(x...) do { \ - if (dvb_demux_tscheck && printk_ratelimit()) \ - printk(x); \ - } while (0) +#define dprintk(fmt, arg...) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg) + +#define dprintk_tscheck(x...) do { \ + if (dvb_demux_tscheck && printk_ratelimit()) \ + dprintk(x); \ +} while (0) /****************************************************************************** * static inlined helper functions @@ -109,21 +108,23 @@ static inline int dvb_dmx_swfilter_payload(struct dvb_demux_feed *feed, { int count = payload(buf); int p; - //int ccok; - //u8 cc; +#ifdef CONFIG_DVB_DEMUX_SECTION_LOSS_LOG + int ccok; + u8 cc; +#endif if (count == 0) return -1; p = 188 - count; - /* +#ifdef CONFIG_DVB_DEMUX_SECTION_LOSS_LOG cc = buf[3] & 0x0f; ccok = ((feed->cc + 1) & 0x0f) == cc; feed->cc = cc; if (!ccok) - printk("missed packet!\n"); - */ + dprintk("missed packet!\n"); +#endif if (buf[1] & 0x40) // PUSI ? feed->peslen = 0xfffa; @@ -189,7 +190,7 @@ static void dvb_dmx_swfilter_section_new(struct dvb_demux_feed *feed) { struct dmx_section_feed *sec = &feed->feed.sec; -#ifdef DVB_DEMUX_SECTION_LOSS_LOG +#ifdef CONFIG_DVB_DEMUX_SECTION_LOSS_LOG if (sec->secbufp < sec->tsfeedp) { int i, n = sec->tsfeedp - sec->secbufp; @@ -199,12 +200,12 @@ static void dvb_dmx_swfilter_section_new(struct dvb_demux_feed *feed) * but just first and last. */ if (sec->secbuf[0] != 0xff || sec->secbuf[n - 1] != 0xff) { - printk("dvb_demux.c section ts padding loss: %d/%d\n", + dprintk("dvb_demux.c section ts padding loss: %d/%d\n", n, sec->tsfeedp); - printk("dvb_demux.c pad data:"); + dprintk("dvb_demux.c pad data:"); for (i = 0; i < n; i++) - printk(" %02x", sec->secbuf[i]); - printk("\n"); + pr_cont(" %02x", sec->secbuf[i]); + pr_cont("\n"); } } #endif @@ -242,8 +243,8 @@ static int dvb_dmx_swfilter_section_copy_dump(struct dvb_demux_feed *feed, return 0; if (sec->tsfeedp + len > DMX_MAX_SECFEED_SIZE) { -#ifdef DVB_DEMUX_SECTION_LOSS_LOG - printk("dvb_demux.c section buffer full loss: %d/%d\n", +#ifdef CONFIG_DVB_DEMUX_SECTION_LOSS_LOG + dprintk("dvb_demux.c section buffer full loss: %d/%d\n", sec->tsfeedp + len - DMX_MAX_SECFEED_SIZE, DMX_MAX_SECFEED_SIZE); #endif @@ -276,9 +277,9 @@ static int dvb_dmx_swfilter_section_copy_dump(struct dvb_demux_feed *feed, /* dump [secbuf .. secbuf+seclen) */ if (feed->pusi_seen) dvb_dmx_swfilter_section_feed(feed); -#ifdef DVB_DEMUX_SECTION_LOSS_LOG +#ifdef CONFIG_DVB_DEMUX_SECTION_LOSS_LOG else - printk("dvb_demux.c pusi not seen, discarding section data\n"); + dprintk("dvb_demux.c pusi not seen, discarding section data\n"); #endif sec->secbufp += seclen; /* secbufp and secbuf moving together is */ sec->secbuf += seclen; /* redundant but saves pointer arithmetic */ @@ -312,9 +313,9 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed, } if (!ccok || dc_i) { -#ifdef DVB_DEMUX_SECTION_LOSS_LOG - printk("dvb_demux.c discontinuity detected %d bytes lost\n", - count); +#ifdef CONFIG_DVB_DEMUX_SECTION_LOSS_LOG + dprintk("dvb_demux.c discontinuity detected %d bytes lost\n", + count); /* * those bytes under sume circumstances will again be reported * in the following dvb_dmx_swfilter_section_new @@ -344,9 +345,10 @@ static int dvb_dmx_swfilter_section_packet(struct dvb_demux_feed *feed, dvb_dmx_swfilter_section_copy_dump(feed, after, after_len); } -#ifdef DVB_DEMUX_SECTION_LOSS_LOG +#ifdef CONFIG_DVB_DEMUX_SECTION_LOSS_LOG else if (count > 0) - printk("dvb_demux.c PUSI=1 but %d bytes lost\n", count); + dprintk("dvb_demux.c PUSI=1 but %d bytes lost\n", + count); #endif } else { /* PUSI=0 (is not set), no section boundary */ @@ -415,9 +417,9 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) 1024); speed_timedelta = ktime_ms_delta(cur_time, demux->speed_last_time); - printk(KERN_INFO "TS speed %llu Kbits/sec \n", - div64_u64(speed_bytes, - speed_timedelta)); + dprintk("TS speed %llu Kbits/sec \n", + div64_u64(speed_bytes, + speed_timedelta)); } demux->speed_last_time = cur_time; @@ -426,8 +428,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) } if (buf[1] & 0x80) { - dprintk_tscheck("TEI detected. " - "PID=0x%x data1=0x%x\n", + dprintk_tscheck("TEI detected. PID=0x%x data1=0x%x\n", pid, buf[1]); /* data in this packet can't be trusted - drop it unless * module option dvb_demux_feed_err_pkts is set */ @@ -635,7 +636,7 @@ static void dvb_demux_feed_add(struct dvb_demux_feed *feed) { spin_lock_irq(&feed->demux->lock); if (dvb_demux_feed_find(feed)) { - printk(KERN_ERR "%s: feed already in list (type=%x state=%x pid=%x)\n", + pr_err("%s: feed already in list (type=%x state=%x pid=%x)\n", __func__, feed->type, feed->state, feed->pid); goto out; } @@ -649,7 +650,7 @@ static void dvb_demux_feed_del(struct dvb_demux_feed *feed) { spin_lock_irq(&feed->demux->lock); if (!(dvb_demux_feed_find(feed))) { - printk(KERN_ERR "%s: feed not in list (type=%x state=%x pid=%x)\n", + pr_err("%s: feed not in list (type=%x state=%x pid=%x)\n", __func__, feed->type, feed->state, feed->pid); goto out; } @@ -660,8 +661,7 @@ out: } static int dmx_ts_feed_set(struct dmx_ts_feed *ts_feed, u16 pid, int ts_type, - enum dmx_ts_pes pes_type, - size_t circular_buffer_size, ktime_t timeout) + enum dmx_ts_pes pes_type, ktime_t timeout) { struct dvb_demux_feed *feed = (struct dvb_demux_feed *)ts_feed; struct dvb_demux *demux = feed->demux; @@ -691,23 +691,10 @@ static int dmx_ts_feed_set(struct dmx_ts_feed *ts_feed, u16 pid, int ts_type, dvb_demux_feed_add(feed); feed->pid = pid; - feed->buffer_size = circular_buffer_size; feed->timeout = timeout; feed->ts_type = ts_type; feed->pes_type = pes_type; - if (feed->buffer_size) { -#ifdef NOBUFS - feed->buffer = NULL; -#else - feed->buffer = vmalloc(feed->buffer_size); - if (!feed->buffer) { - mutex_unlock(&demux->mutex); - return -ENOMEM; - } -#endif - } - feed->state = DMX_STATE_READY; mutex_unlock(&demux->mutex); @@ -796,7 +783,6 @@ static int dvbdmx_allocate_ts_feed(struct dmx_demux *dmx, feed->demux = demux; feed->pid = 0xffff; feed->peslen = 0xfffa; - feed->buffer = NULL; (*ts_feed) = &feed->feed.ts; (*ts_feed)->parent = dmx; @@ -833,10 +819,6 @@ static int dvbdmx_release_ts_feed(struct dmx_demux *dmx, mutex_unlock(&demux->mutex); return -EINVAL; } -#ifndef NOBUFS - vfree(feed->buffer); - feed->buffer = NULL; -#endif feed->state = DMX_STATE_FREE; feed->filter->state = DMX_STATE_FREE; @@ -888,8 +870,7 @@ static int dmx_section_feed_allocate_filter(struct dmx_section_feed *feed, } static int dmx_section_feed_set(struct dmx_section_feed *feed, - u16 pid, size_t circular_buffer_size, - int check_crc) + u16 pid, int check_crc) { struct dvb_demux_feed *dvbdmxfeed = (struct dvb_demux_feed *)feed; struct dvb_demux *dvbdmx = dvbdmxfeed->demux; @@ -903,19 +884,8 @@ static int dmx_section_feed_set(struct dmx_section_feed *feed, dvb_demux_feed_add(dvbdmxfeed); dvbdmxfeed->pid = pid; - dvbdmxfeed->buffer_size = circular_buffer_size; dvbdmxfeed->feed.sec.check_crc = check_crc; -#ifdef NOBUFS - dvbdmxfeed->buffer = NULL; -#else - dvbdmxfeed->buffer = vmalloc(dvbdmxfeed->buffer_size); - if (!dvbdmxfeed->buffer) { - mutex_unlock(&dvbdmx->mutex); - return -ENOMEM; - } -#endif - dvbdmxfeed->state = DMX_STATE_READY; mutex_unlock(&dvbdmx->mutex); return 0; @@ -1074,7 +1044,6 @@ static int dvbdmx_allocate_section_feed(struct dmx_demux *demux, dvbdmxfeed->feed.sec.secbufp = dvbdmxfeed->feed.sec.seclen = 0; dvbdmxfeed->feed.sec.tsfeedp = 0; dvbdmxfeed->filter = NULL; - dvbdmxfeed->buffer = NULL; (*feed) = &dvbdmxfeed->feed.sec; (*feed)->is_filtering = 0; @@ -1103,10 +1072,6 @@ static int dvbdmx_release_section_feed(struct dmx_demux *demux, mutex_unlock(&dvbdmx->mutex); return -EINVAL; } -#ifndef NOBUFS - vfree(dvbdmxfeed->buffer); - dvbdmxfeed->buffer = NULL; -#endif dvbdmxfeed->state = DMX_STATE_FREE; dvb_demux_feed_del(dvbdmxfeed); @@ -1268,7 +1233,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux) dvbdemux->cnt_storage = vmalloc(MAX_PID + 1); if (!dvbdemux->cnt_storage) - printk(KERN_WARNING "Couldn't allocate memory for TS/TEI check. Disabling it\n"); + pr_warn("Couldn't allocate memory for TS/TEI check. Disabling it\n"); INIT_LIST_HEAD(&dvbdemux->frontend_list); diff --git a/drivers/media/dvb-core/dvb_demux.h b/drivers/media/dvb-core/dvb_demux.h index 5ed3cab4ad28..9235b008ea0a 100644 --- a/drivers/media/dvb-core/dvb_demux.h +++ b/drivers/media/dvb-core/dvb_demux.h @@ -80,8 +80,6 @@ struct dvb_demux_feed { int type; int state; u16 pid; - u8 *buffer; - int buffer_size; ktime_t timeout; struct dvb_demux_filter *filter; diff --git a/drivers/media/dvb-core/dvb_filter.c b/drivers/media/dvb-core/dvb_filter.c deleted file mode 100644 index 772003fb1821..000000000000 --- a/drivers/media/dvb-core/dvb_filter.c +++ /dev/null @@ -1,603 +0,0 @@ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/string.h> -#include "dvb_filter.h" - -#if 0 -static unsigned int bitrates[3][16] = -{{0,32,64,96,128,160,192,224,256,288,320,352,384,416,448,0}, - {0,32,48,56,64,80,96,112,128,160,192,224,256,320,384,0}, - {0,32,40,48,56,64,80,96,112,128,160,192,224,256,320,0}}; -#endif - -static u32 freq[4] = {480, 441, 320, 0}; - -static unsigned int ac3_bitrates[32] = - {32,40,48,56,64,80,96,112,128,160,192,224,256,320,384,448,512,576,640, - 0,0,0,0,0,0,0,0,0,0,0,0,0}; - -static u32 ac3_frames[3][32] = - {{64,80,96,112,128,160,192,224,256,320,384,448,512,640,768,896,1024, - 1152,1280,0,0,0,0,0,0,0,0,0,0,0,0,0}, - {69,87,104,121,139,174,208,243,278,348,417,487,557,696,835,975,1114, - 1253,1393,0,0,0,0,0,0,0,0,0,0,0,0,0}, - {96,120,144,168,192,240,288,336,384,480,576,672,768,960,1152,1344, - 1536,1728,1920,0,0,0,0,0,0,0,0,0,0,0,0,0}}; - - - -#if 0 -static void setup_ts2pes(ipack *pa, ipack *pv, u16 *pida, u16 *pidv, - void (*pes_write)(u8 *buf, int count, void *data), - void *priv) -{ - dvb_filter_ipack_init(pa, IPACKS, pes_write); - dvb_filter_ipack_init(pv, IPACKS, pes_write); - pa->pid = pida; - pv->pid = pidv; - pa->data = priv; - pv->data = priv; -} -#endif - -#if 0 -static void ts_to_pes(ipack *p, u8 *buf) // don't need count (=188) -{ - u8 off = 0; - - if (!buf || !p ){ - printk("NULL POINTER IDIOT\n"); - return; - } - if (buf[1]&PAY_START) { - if (p->plength == MMAX_PLENGTH-6 && p->found>6){ - p->plength = p->found-6; - p->found = 0; - send_ipack(p); - dvb_filter_ipack_reset(p); - } - } - if (buf[3] & ADAPT_FIELD) { // adaptation field? - off = buf[4] + 1; - if (off+4 > 187) return; - } - dvb_filter_instant_repack(buf+4+off, TS_SIZE-4-off, p); -} -#endif - -#if 0 -/* needs 5 byte input, returns picture coding type*/ -static int read_picture_header(u8 *headr, struct mpg_picture *pic, int field, int pr) -{ - u8 pct; - - if (pr) printk( "Pic header: "); - pic->temporal_reference[field] = (( headr[0] << 2 ) | - (headr[1] & 0x03) )& 0x03ff; - if (pr) printk( " temp ref: 0x%04x", pic->temporal_reference[field]); - - pct = ( headr[1] >> 2 ) & 0x07; - pic->picture_coding_type[field] = pct; - if (pr) { - switch(pct){ - case I_FRAME: - printk( " I-FRAME"); - break; - case B_FRAME: - printk( " B-FRAME"); - break; - case P_FRAME: - printk( " P-FRAME"); - break; - } - } - - - pic->vinfo.vbv_delay = (( headr[1] >> 5 ) | ( headr[2] << 3) | - ( (headr[3] & 0x1F) << 11) ) & 0xffff; - - if (pr) printk( " vbv delay: 0x%04x", pic->vinfo.vbv_delay); - - pic->picture_header_parameter = ( headr[3] & 0xe0 ) | - ((headr[4] & 0x80) >> 3); - - if ( pct == B_FRAME ){ - pic->picture_header_parameter |= ( headr[4] >> 3 ) & 0x0f; - } - if (pr) printk( " pic head param: 0x%x", - pic->picture_header_parameter); - - return pct; -} -#endif - -#if 0 -/* needs 4 byte input */ -static int read_gop_header(u8 *headr, struct mpg_picture *pic, int pr) -{ - if (pr) printk("GOP header: "); - - pic->time_code = (( headr[0] << 17 ) | ( headr[1] << 9) | - ( headr[2] << 1 ) | (headr[3] &0x01)) & 0x1ffffff; - - if (pr) printk(" time: %d:%d.%d ", (headr[0]>>2)& 0x1F, - ((headr[0]<<4)& 0x30)| ((headr[1]>>4)& 0x0F), - ((headr[1]<<3)& 0x38)| ((headr[2]>>5)& 0x0F)); - - if ( ( headr[3] & 0x40 ) != 0 ){ - pic->closed_gop = 1; - } else { - pic->closed_gop = 0; - } - if (pr) printk("closed: %d", pic->closed_gop); - - if ( ( headr[3] & 0x20 ) != 0 ){ - pic->broken_link = 1; - } else { - pic->broken_link = 0; - } - if (pr) printk(" broken: %d\n", pic->broken_link); - - return 0; -} -#endif - -#if 0 -/* needs 8 byte input */ -static int read_sequence_header(u8 *headr, struct dvb_video_info *vi, int pr) -{ - int sw; - int form = -1; - - if (pr) printk("Reading sequence header\n"); - - vi->horizontal_size = ((headr[1] &0xF0) >> 4) | (headr[0] << 4); - vi->vertical_size = ((headr[1] &0x0F) << 8) | (headr[2]); - - sw = (int)((headr[3]&0xF0) >> 4) ; - - switch( sw ){ - case 1: - if (pr) - printk("Videostream: ASPECT: 1:1"); - vi->aspect_ratio = 100; - break; - case 2: - if (pr) - printk("Videostream: ASPECT: 4:3"); - vi->aspect_ratio = 133; - break; - case 3: - if (pr) - printk("Videostream: ASPECT: 16:9"); - vi->aspect_ratio = 177; - break; - case 4: - if (pr) - printk("Videostream: ASPECT: 2.21:1"); - vi->aspect_ratio = 221; - break; - - case 5 ... 15: - if (pr) - printk("Videostream: ASPECT: reserved"); - vi->aspect_ratio = 0; - break; - - default: - vi->aspect_ratio = 0; - return -1; - } - - if (pr) - printk(" Size = %dx%d",vi->horizontal_size,vi->vertical_size); - - sw = (int)(headr[3]&0x0F); - - switch ( sw ) { - case 1: - if (pr) - printk(" FRate: 23.976 fps"); - vi->framerate = 23976; - form = -1; - break; - case 2: - if (pr) - printk(" FRate: 24 fps"); - vi->framerate = 24000; - form = -1; - break; - case 3: - if (pr) - printk(" FRate: 25 fps"); - vi->framerate = 25000; - form = VIDEO_MODE_PAL; - break; - case 4: - if (pr) - printk(" FRate: 29.97 fps"); - vi->framerate = 29970; - form = VIDEO_MODE_NTSC; - break; - case 5: - if (pr) - printk(" FRate: 30 fps"); - vi->framerate = 30000; - form = VIDEO_MODE_NTSC; - break; - case 6: - if (pr) - printk(" FRate: 50 fps"); - vi->framerate = 50000; - form = VIDEO_MODE_PAL; - break; - case 7: - if (pr) - printk(" FRate: 60 fps"); - vi->framerate = 60000; - form = VIDEO_MODE_NTSC; - break; - } - - vi->bit_rate = (headr[4] << 10) | (headr[5] << 2) | (headr[6] & 0x03); - - vi->vbv_buffer_size - = (( headr[6] & 0xF8) >> 3 ) | (( headr[7] & 0x1F )<< 5); - - if (pr){ - printk(" BRate: %d Mbit/s",4*(vi->bit_rate)/10000); - printk(" vbvbuffer %d",16*1024*(vi->vbv_buffer_size)); - printk("\n"); - } - - vi->video_format = form; - - return 0; -} -#endif - - -#if 0 -static int get_vinfo(u8 *mbuf, int count, struct dvb_video_info *vi, int pr) -{ - u8 *headr; - int found = 0; - int c = 0; - - while (found < 4 && c+4 < count){ - u8 *b; - - b = mbuf+c; - if ( b[0] == 0x00 && b[1] == 0x00 && b[2] == 0x01 - && b[3] == 0xb3) found = 4; - else { - c++; - } - } - - if (! found) return -1; - c += 4; - if (c+12 >= count) return -1; - headr = mbuf+c; - if (read_sequence_header(headr, vi, pr) < 0) return -1; - vi->off = c-4; - return 0; -} -#endif - - -#if 0 -static int get_ainfo(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr) -{ - u8 *headr; - int found = 0; - int c = 0; - int fr = 0; - - while (found < 2 && c < count){ - u8 b[2]; - memcpy( b, mbuf+c, 2); - - if ( b[0] == 0xff && (b[1] & 0xf8) == 0xf8) - found = 2; - else { - c++; - } - } - - if (!found) return -1; - - if (c+3 >= count) return -1; - headr = mbuf+c; - - ai->layer = (headr[1] & 0x06) >> 1; - - if (pr) - printk("Audiostream: Layer: %d", 4-ai->layer); - - - ai->bit_rate = bitrates[(3-ai->layer)][(headr[2] >> 4 )]*1000; - - if (pr){ - if (ai->bit_rate == 0) - printk(" Bit rate: free"); - else if (ai->bit_rate == 0xf) - printk(" BRate: reserved"); - else - printk(" BRate: %d kb/s", ai->bit_rate/1000); - } - - fr = (headr[2] & 0x0c ) >> 2; - ai->frequency = freq[fr]*100; - if (pr){ - if (ai->frequency == 3) - printk(" Freq: reserved\n"); - else - printk(" Freq: %d kHz\n",ai->frequency); - - } - ai->off = c; - return 0; -} -#endif - - -int dvb_filter_get_ac3info(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr) -{ - u8 *headr; - int found = 0; - int c = 0; - u8 frame = 0; - int fr = 0; - - while ( !found && c < count){ - u8 *b = mbuf+c; - - if ( b[0] == 0x0b && b[1] == 0x77 ) - found = 1; - else { - c++; - } - } - - if (!found) return -1; - if (pr) - printk("Audiostream: AC3"); - - ai->off = c; - if (c+5 >= count) return -1; - - ai->layer = 0; // 0 for AC3 - headr = mbuf+c+2; - - frame = (headr[2]&0x3f); - ai->bit_rate = ac3_bitrates[frame >> 1]*1000; - - if (pr) - printk(" BRate: %d kb/s", (int) ai->bit_rate/1000); - - ai->frequency = (headr[2] & 0xc0 ) >> 6; - fr = (headr[2] & 0xc0 ) >> 6; - ai->frequency = freq[fr]*100; - if (pr) printk (" Freq: %d Hz\n", (int) ai->frequency); - - - ai->framesize = ac3_frames[fr][frame >> 1]; - if ((frame & 1) && (fr == 1)) ai->framesize++; - ai->framesize = ai->framesize << 1; - if (pr) printk (" Framesize %d\n",(int) ai->framesize); - - - return 0; -} -EXPORT_SYMBOL(dvb_filter_get_ac3info); - - -#if 0 -static u8 *skip_pes_header(u8 **bufp) -{ - u8 *inbuf = *bufp; - u8 *buf = inbuf; - u8 *pts = NULL; - int skip = 0; - - static const int mpeg1_skip_table[16] = { - 1, 0xffff, 5, 10, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff - }; - - - if ((inbuf[6] & 0xc0) == 0x80){ /* mpeg2 */ - if (buf[7] & PTS_ONLY) - pts = buf+9; - else pts = NULL; - buf = inbuf + 9 + inbuf[8]; - } else { /* mpeg1 */ - for (buf = inbuf + 6; *buf == 0xff; buf++) - if (buf == inbuf + 6 + 16) { - break; - } - if ((*buf & 0xc0) == 0x40) - buf += 2; - skip = mpeg1_skip_table [*buf >> 4]; - if (skip == 5 || skip == 10) pts = buf; - else pts = NULL; - - buf += mpeg1_skip_table [*buf >> 4]; - } - - *bufp = buf; - return pts; -} -#endif - -#if 0 -static void initialize_quant_matrix( u32 *matrix ) -{ - int i; - - matrix[0] = 0x08101013; - matrix[1] = 0x10131616; - matrix[2] = 0x16161616; - matrix[3] = 0x1a181a1b; - matrix[4] = 0x1b1b1a1a; - matrix[5] = 0x1a1a1b1b; - matrix[6] = 0x1b1d1d1d; - matrix[7] = 0x2222221d; - matrix[8] = 0x1d1d1b1b; - matrix[9] = 0x1d1d2020; - matrix[10] = 0x22222526; - matrix[11] = 0x25232322; - matrix[12] = 0x23262628; - matrix[13] = 0x28283030; - matrix[14] = 0x2e2e3838; - matrix[15] = 0x3a454553; - - for ( i = 16 ; i < 32 ; i++ ) - matrix[i] = 0x10101010; -} -#endif - -#if 0 -static void initialize_mpg_picture(struct mpg_picture *pic) -{ - int i; - - /* set MPEG1 */ - pic->mpeg1_flag = 1; - pic->profile_and_level = 0x4A ; /* MP@LL */ - pic->progressive_sequence = 1; - pic->low_delay = 0; - - pic->sequence_display_extension_flag = 0; - for ( i = 0 ; i < 4 ; i++ ){ - pic->frame_centre_horizontal_offset[i] = 0; - pic->frame_centre_vertical_offset[i] = 0; - } - pic->last_frame_centre_horizontal_offset = 0; - pic->last_frame_centre_vertical_offset = 0; - - pic->picture_display_extension_flag[0] = 0; - pic->picture_display_extension_flag[1] = 0; - pic->sequence_header_flag = 0; - pic->gop_flag = 0; - pic->sequence_end_flag = 0; -} -#endif - -#if 0 -static void mpg_set_picture_parameter( int32_t field_type, struct mpg_picture *pic ) -{ - int16_t last_h_offset; - int16_t last_v_offset; - - int16_t *p_h_offset; - int16_t *p_v_offset; - - if ( pic->mpeg1_flag ){ - pic->picture_structure[field_type] = VIDEO_FRAME_PICTURE; - pic->top_field_first = 0; - pic->repeat_first_field = 0; - pic->progressive_frame = 1; - pic->picture_coding_parameter = 0x000010; - } - - /* Reset flag */ - pic->picture_display_extension_flag[field_type] = 0; - - last_h_offset = pic->last_frame_centre_horizontal_offset; - last_v_offset = pic->last_frame_centre_vertical_offset; - if ( field_type == FIRST_FIELD ){ - p_h_offset = pic->frame_centre_horizontal_offset; - p_v_offset = pic->frame_centre_vertical_offset; - *p_h_offset = last_h_offset; - *(p_h_offset + 1) = last_h_offset; - *(p_h_offset + 2) = last_h_offset; - *p_v_offset = last_v_offset; - *(p_v_offset + 1) = last_v_offset; - *(p_v_offset + 2) = last_v_offset; - } else { - pic->frame_centre_horizontal_offset[3] = last_h_offset; - pic->frame_centre_vertical_offset[3] = last_v_offset; - } -} -#endif - -#if 0 -static void init_mpg_picture( struct mpg_picture *pic, int chan, int32_t field_type) -{ - pic->picture_header = 0; - pic->sequence_header_data - = ( INIT_HORIZONTAL_SIZE << 20 ) - | ( INIT_VERTICAL_SIZE << 8 ) - | ( INIT_ASPECT_RATIO << 4 ) - | ( INIT_FRAME_RATE ); - pic->mpeg1_flag = 0; - pic->vinfo.horizontal_size - = INIT_DISP_HORIZONTAL_SIZE; - pic->vinfo.vertical_size - = INIT_DISP_VERTICAL_SIZE; - pic->picture_display_extension_flag[field_type] - = 0; - pic->pts_flag[field_type] = 0; - - pic->sequence_gop_header = 0; - pic->picture_header = 0; - pic->sequence_header_flag = 0; - pic->gop_flag = 0; - pic->sequence_end_flag = 0; - pic->sequence_display_extension_flag = 0; - pic->last_frame_centre_horizontal_offset = 0; - pic->last_frame_centre_vertical_offset = 0; - pic->channel = chan; -} -#endif - -void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, unsigned short pid, - dvb_filter_pes2ts_cb_t *cb, void *priv) -{ - unsigned char *buf=p2ts->buf; - - buf[0]=0x47; - buf[1]=(pid>>8); - buf[2]=pid&0xff; - p2ts->cc=0; - p2ts->cb=cb; - p2ts->priv=priv; -} -EXPORT_SYMBOL(dvb_filter_pes2ts_init); - -int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes, - int len, int payload_start) -{ - unsigned char *buf=p2ts->buf; - int ret=0, rest; - - //len=6+((pes[4]<<8)|pes[5]); - - if (payload_start) - buf[1]|=0x40; - else - buf[1]&=~0x40; - while (len>=184) { - buf[3]=0x10|((p2ts->cc++)&0x0f); - memcpy(buf+4, pes, 184); - if ((ret=p2ts->cb(p2ts->priv, buf))) - return ret; - len-=184; pes+=184; - buf[1]&=~0x40; - } - if (!len) - return 0; - buf[3]=0x30|((p2ts->cc++)&0x0f); - rest=183-len; - if (rest) { - buf[5]=0x00; - if (rest-1) - memset(buf+6, 0xff, rest-1); - } - buf[4]=rest; - memcpy(buf+5+rest, pes, len); - return p2ts->cb(p2ts->priv, buf); -} -EXPORT_SYMBOL(dvb_filter_pes2ts); diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index 01511e5a5566..cdb7048874c5 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -28,6 +28,8 @@ /* Enables DVBv3 compatibility bits at the headers */ #define __DVB_CORE__ +#define pr_fmt(fmt) "dvb_frontend: " fmt + #include <linux/string.h> #include <linux/kernel.h> #include <linux/sched.h> @@ -67,6 +69,9 @@ MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB volt module_param(dvb_mfe_wait_time, int, 0644); MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to <mfe_wait_time> seconds on open() for multi-frontend to become available (default:5 seconds)"); +#define dprintk(fmt, arg...) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg) + #define FESTATE_IDLE 1 #define FESTATE_RETUNE 2 #define FESTATE_TUNING_FAST 4 @@ -1515,12 +1520,8 @@ static int dtv_set_frontend(struct dvb_frontend *fe); static bool is_dvbv3_delsys(u32 delsys) { - bool status; - - status = (delsys == SYS_DVBT) || (delsys == SYS_DVBC_ANNEX_A) || - (delsys == SYS_DVBS) || (delsys == SYS_ATSC); - - return status; + return (delsys == SYS_DVBT) || (delsys == SYS_DVBC_ANNEX_A) || + (delsys == SYS_DVBS) || (delsys == SYS_ATSC); } /** @@ -2356,7 +2357,8 @@ static int dvb_frontend_ioctl_legacy(struct file *file, int i; u8 last = 1; if (dvb_frontend_debug) - printk("%s switch command: 0x%04lx\n", __func__, swcmd); + dprintk("%s switch command: 0x%04lx\n", + __func__, swcmd); nexttime = ktime_get_boottime(); if (dvb_frontend_debug) tv[0] = nexttime; @@ -2379,10 +2381,10 @@ static int dvb_frontend_ioctl_legacy(struct file *file, dvb_frontend_sleep_until(&nexttime, 8000); } if (dvb_frontend_debug) { - printk("%s(%d): switch delay (should be 32k followed by all 8k\n", + dprintk("%s(%d): switch delay (should be 32k followed by all 8k)\n", __func__, fe->dvb->num); for (i = 1; i < 10; i++) - printk("%d: %d\n", i, + pr_info("%d: %d\n", i, (int) ktime_us_delta(tv[i], tv[i-1])); } err = 0; diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c index 9914f69a4a02..b9a46d5a1bb5 100644 --- a/drivers/media/dvb-core/dvb_net.c +++ b/drivers/media/dvb-core/dvb_net.c @@ -54,6 +54,8 @@ * */ +#define pr_fmt(fmt) "dvb_net: " fmt + #include <linux/module.h> #include <linux/kernel.h> #include <linux/netdevice.h> @@ -344,7 +346,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Check TS error conditions: sync_byte, transport_error_indicator, scrambling_control . */ if ((ts[0] != TS_SYNC) || (ts[1] & TS_TEI) || ((ts[3] & TS_SC) != 0)) { - printk(KERN_WARNING "%lu: Invalid TS cell: SYNC %#x, TEI %u, SC %#x.\n", + pr_warn("%lu: Invalid TS cell: SYNC %#x, TEI %u, SC %#x.\n", priv->ts_count, ts[0], (ts[1] & TS_TEI) >> 7, (ts[3] & TS_SC) >> 6); @@ -376,8 +378,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) priv->tscc = ts[3] & 0x0F; /* There is a pointer field here. */ if (ts[4] > ts_remain) { - printk(KERN_ERR "%lu: Invalid ULE packet " - "(pointer field %d)\n", priv->ts_count, ts[4]); + pr_err("%lu: Invalid ULE packet (pointer field %d)\n", + priv->ts_count, ts[4]); ts += TS_SZ; priv->ts_count++; continue; @@ -400,8 +402,9 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) priv->tscc = (priv->tscc + 1) & 0x0F; else { /* TS discontinuity handling: */ - printk(KERN_WARNING "%lu: TS discontinuity: got %#x, " - "expected %#x.\n", priv->ts_count, ts[3] & 0x0F, priv->tscc); + pr_warn("%lu: TS discontinuity: got %#x, expected %#x.\n", + priv->ts_count, ts[3] & 0x0F, + priv->tscc); /* Drop partly decoded SNDU, reset state, resync on PUSI. */ if (priv->ule_skb) { dev_kfree_skb( priv->ule_skb ); @@ -423,8 +426,9 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) if (! priv->need_pusi) { if (!(*from_where < (ts_remain-1)) || *from_where != priv->ule_sndu_remain) { /* Pointer field is invalid. Drop this TS cell and any started ULE SNDU. */ - printk(KERN_WARNING "%lu: Invalid pointer " - "field: %u.\n", priv->ts_count, *from_where); + pr_warn("%lu: Invalid pointer field: %u.\n", + priv->ts_count, + *from_where); /* Drop partly decoded SNDU, reset state, resync on PUSI. */ if (priv->ule_skb) { @@ -454,9 +458,10 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) * current TS cell. */ dev->stats.rx_errors++; dev->stats.rx_length_errors++; - printk(KERN_WARNING "%lu: Expected %d more SNDU bytes, but " - "got PUSI (pf %d, ts_remain %d). Flushing incomplete payload.\n", - priv->ts_count, priv->ule_sndu_remain, ts[4], ts_remain); + pr_warn("%lu: Expected %d more SNDU bytes, but got PUSI (pf %d, ts_remain %d). Flushing incomplete payload.\n", + priv->ts_count, + priv->ule_sndu_remain, + ts[4], ts_remain); dev_kfree_skb(priv->ule_skb); /* Prepare for next SNDU. */ reset_ule(priv); @@ -475,8 +480,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) * TS. * Check ts_remain has to be >= 2 here. */ if (ts_remain < 2) { - printk(KERN_WARNING "Invalid payload packing: only %d " - "bytes left in TS. Resyncing.\n", ts_remain); + pr_warn("Invalid payload packing: only %d bytes left in TS. Resyncing.\n", + ts_remain); priv->ule_sndu_len = 0; priv->need_pusi = 1; ts += TS_SZ; @@ -494,8 +499,9 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) priv->ule_dbit = 0; if (priv->ule_sndu_len < 5) { - printk(KERN_WARNING "%lu: Invalid ULE SNDU length %u. " - "Resyncing.\n", priv->ts_count, priv->ule_sndu_len); + pr_warn("%lu: Invalid ULE SNDU length %u. Resyncing.\n", + priv->ts_count, + priv->ule_sndu_len); dev->stats.rx_errors++; dev->stats.rx_length_errors++; priv->ule_sndu_len = 0; @@ -550,8 +556,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) * prepare for the largest case: bridged SNDU with MAC address (dbit = 0). */ priv->ule_skb = dev_alloc_skb( priv->ule_sndu_len + ETH_HLEN + ETH_ALEN ); if (priv->ule_skb == NULL) { - printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", - dev->name); + pr_notice("%s: Memory squeeze, dropping packet.\n", + dev->name); dev->stats.rx_dropped++; return; } @@ -595,8 +601,11 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) *(tail - 2) << 8 | *(tail - 1); if (ule_crc != expected_crc) { - printk(KERN_WARNING "%lu: CRC32 check FAILED: %08x / %08x, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n", - priv->ts_count, ule_crc, expected_crc, priv->ule_sndu_len, priv->ule_sndu_type, ts_remain, ts_remain > 2 ? *(unsigned short *)from_where : 0); + pr_warn("%lu: CRC32 check FAILED: %08x / %08x, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n", + priv->ts_count, ule_crc, expected_crc, + priv->ule_sndu_len, priv->ule_sndu_type, + ts_remain, + ts_remain > 2 ? *(unsigned short *)from_where : 0); #ifdef ULE_DEBUG hexdump( iov[0].iov_base, iov[0].iov_len ); @@ -687,7 +696,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) int l = handle_ule_extensions(priv); if (l < 0) { /* Mandatory extension header unknown or TEST SNDU. Drop it. */ - // printk( KERN_WARNING "Dropping SNDU, extension headers.\n" ); + // pr_warn("Dropping SNDU, extension headers.\n" ); dev_kfree_skb(priv->ule_skb); goto sndu_done; } @@ -741,10 +750,10 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) priv->ule_skb = NULL; priv->ule_sndu_type_1 = 0; priv->ule_sndu_len = 0; - // printk(KERN_WARNING "More data in current TS: [%#x %#x %#x %#x]\n", + // pr_warn("More data in current TS: [%#x %#x %#x %#x]\n", // *(from_where + 0), *(from_where + 1), // *(from_where + 2), *(from_where + 3)); - // printk(KERN_WARNING "ts @ %p, stopped @ %p:\n", ts, from_where + 0); + // pr_warn("ts @ %p, stopped @ %p:\n", ts, from_where + 0); // hexdump(ts, 188); } else { new_ts = 1; @@ -766,10 +775,10 @@ static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len, struct net_device *dev = feed->priv; if (buffer2) - printk(KERN_WARNING "buffer2 not NULL: %p.\n", buffer2); + pr_warn("buffer2 not NULL: %p.\n", buffer2); if (buffer1_len > 32768) - printk(KERN_WARNING "length > 32k: %zu.\n", buffer1_len); - /* printk("TS callback: %u bytes, %u TS cells @ %p.\n", + pr_warn("length > 32k: %zu.\n", buffer1_len); + /* pr_info("TS callback: %u bytes, %u TS cells @ %p.\n", buffer1_len, buffer1_len / TS_SZ, buffer1); */ dvb_net_ule(dev, buffer1, buffer1_len); return 0; @@ -786,7 +795,7 @@ static void dvb_net_sec(struct net_device *dev, /* note: pkt_len includes a 32bit checksum */ if (pkt_len < 16) { - printk("%s: IP/MPE packet length = %d too small.\n", + pr_warn("%s: IP/MPE packet length = %d too small.\n", dev->name, pkt_len); stats->rx_errors++; stats->rx_length_errors++; @@ -824,7 +833,7 @@ static void dvb_net_sec(struct net_device *dev, * 12 byte MPE header; 4 byte checksum; + 2 byte alignment, 8 byte LLC/SNAP */ if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2 - snap))) { - //printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); + //pr_notice("%s: Memory squeeze, dropping packet.\n", dev->name); stats->rx_dropped++; return; } @@ -903,7 +912,7 @@ static int dvb_net_filter_sec_set(struct net_device *dev, *secfilter=NULL; ret = priv->secfeed->allocate_filter(priv->secfeed, secfilter); if (ret<0) { - printk("%s: could not get filter\n", dev->name); + pr_err("%s: could not get filter\n", dev->name); return ret; } @@ -944,7 +953,7 @@ static int dvb_net_feed_start(struct net_device *dev) netdev_dbg(dev, "rx_mode %i\n", priv->rx_mode); mutex_lock(&priv->mutex); if (priv->tsfeed || priv->secfeed || priv->secfilter || priv->multi_secfilter[0]) - printk("%s: BUG %d\n", __func__, __LINE__); + pr_err("%s: BUG %d\n", __func__, __LINE__); priv->secfeed=NULL; priv->secfilter=NULL; @@ -955,14 +964,15 @@ static int dvb_net_feed_start(struct net_device *dev) ret=demux->allocate_section_feed(demux, &priv->secfeed, dvb_net_sec_callback); if (ret<0) { - printk("%s: could not allocate section feed\n", dev->name); + pr_err("%s: could not allocate section feed\n", + dev->name); goto error; } - ret = priv->secfeed->set(priv->secfeed, priv->pid, 32768, 1); + ret = priv->secfeed->set(priv->secfeed, priv->pid, 1); if (ret<0) { - printk("%s: could not set section feed\n", dev->name); + pr_err("%s: could not set section feed\n", dev->name); priv->demux->release_section_feed(priv->demux, priv->secfeed); priv->secfeed=NULL; goto error; @@ -1003,7 +1013,7 @@ static int dvb_net_feed_start(struct net_device *dev) netdev_dbg(dev, "alloc tsfeed\n"); ret = demux->allocate_ts_feed(demux, &priv->tsfeed, dvb_net_ts_callback); if (ret < 0) { - printk("%s: could not allocate ts feed\n", dev->name); + pr_err("%s: could not allocate ts feed\n", dev->name); goto error; } @@ -1013,12 +1023,11 @@ static int dvb_net_feed_start(struct net_device *dev) priv->pid, /* pid */ TS_PACKET, /* type */ DMX_PES_OTHER, /* pes type */ - 32768, /* circular buffer size */ timeout /* timeout */ ); if (ret < 0) { - printk("%s: could not set ts feed\n", dev->name); + pr_err("%s: could not set ts feed\n", dev->name); priv->demux->release_ts_feed(priv->demux, priv->tsfeed); priv->tsfeed = NULL; goto error; @@ -1067,7 +1076,7 @@ static int dvb_net_feed_stop(struct net_device *dev) priv->demux->release_section_feed(priv->demux, priv->secfeed); priv->secfeed = NULL; } else - printk("%s: no feed to stop\n", dev->name); + pr_err("%s: no feed to stop\n", dev->name); } else if (priv->feedtype == DVB_NET_FEEDTYPE_ULE) { if (priv->tsfeed) { if (priv->tsfeed->is_filtering) { @@ -1078,7 +1087,7 @@ static int dvb_net_feed_stop(struct net_device *dev) priv->tsfeed = NULL; } else - printk("%s: no ts feed to stop\n", dev->name); + pr_err("%s: no ts feed to stop\n", dev->name); } else ret = -EINVAL; mutex_unlock(&priv->mutex); @@ -1279,7 +1288,7 @@ static int dvb_net_add_if(struct dvb_net *dvbnet, u16 pid, u8 feedtype) free_netdev(net); return result; } - printk("dvb_net: created network interface %s\n", net->name); + pr_info("created network interface %s\n", net->name); return if_num; } @@ -1298,7 +1307,7 @@ static int dvb_net_remove_if(struct dvb_net *dvbnet, unsigned long num) dvb_net_stop(net); flush_work(&priv->set_multicast_list_wq); flush_work(&priv->restart_net_feed_wq); - printk("dvb_net: removed network interface %s\n", net->name); + pr_info("removed network interface %s\n", net->name); unregister_netdev(net); dvbnet->state[num]=0; dvbnet->device[num] = NULL; diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c index 75a3f4b57fd4..0694d1d53c67 100644 --- a/drivers/media/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -21,6 +21,8 @@ * */ +#define pr_fmt(fmt) "dvbdev: " fmt + #include <linux/types.h> #include <linux/errno.h> #include <linux/string.h> @@ -43,7 +45,11 @@ static int dvbdev_debug; module_param(dvbdev_debug, int, 0644); MODULE_PARM_DESC(dvbdev_debug, "Turn on/off device debugging (default:off)."); -#define dprintk if (dvbdev_debug) printk +#define dprintk(fmt, arg...) do { \ + if (dvbdev_debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) static LIST_HEAD(dvb_adapter_list); static DEFINE_MUTEX(dvbdev_register_lock); @@ -354,7 +360,7 @@ static int dvb_create_media_entity(struct dvb_device *dvbdev, if (ret) return ret; - printk(KERN_DEBUG "%s: media entity '%s' registered.\n", + pr_info("%s: media entity '%s' registered.\n", __func__, dvbdev->entity->name); return 0; @@ -438,7 +444,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, if ((id = dvbdev_get_free_id (adap, type)) < 0){ mutex_unlock(&dvbdev_register_lock); *pdvbdev = NULL; - printk(KERN_ERR "%s: couldn't find free device id\n", __func__); + pr_err("%s: couldn't find free device id\n", __func__); return -ENFILE; } @@ -493,8 +499,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, ret = dvb_register_media_device(dvbdev, type, minor, demux_sink_pads); if (ret) { - printk(KERN_ERR - "%s: dvb_register_media_device failed to create the mediagraph\n", + pr_err("%s: dvb_register_media_device failed to create the mediagraph\n", __func__); dvb_media_device_free(dvbdev); @@ -511,11 +516,11 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, MKDEV(DVB_MAJOR, minor), dvbdev, "dvb%d.%s%d", adap->num, dnames[type], id); if (IS_ERR(clsdev)) { - printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n", + pr_err("%s: failed to create device dvb%d.%s%d (%ld)\n", __func__, adap->num, dnames[type], id, PTR_ERR(clsdev)); return PTR_ERR(clsdev); } - dprintk(KERN_DEBUG "DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n", + dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n", adap->num, dnames[type], id, minor, minor); return 0; @@ -808,7 +813,7 @@ int dvb_register_adapter(struct dvb_adapter *adap, const char *name, memset (adap, 0, sizeof(struct dvb_adapter)); INIT_LIST_HEAD (&adap->device_list); - printk(KERN_INFO "DVB: registering new adapter (%s)\n", name); + pr_info("DVB: registering new adapter (%s)\n", name); adap->num = num; adap->name = name; @@ -926,13 +931,13 @@ static int __init init_dvbdev(void) dev_t dev = MKDEV(DVB_MAJOR, 0); if ((retval = register_chrdev_region(dev, MAX_DVB_MINORS, "DVB")) != 0) { - printk(KERN_ERR "dvb-core: unable to get major %d\n", DVB_MAJOR); + pr_err("dvb-core: unable to get major %d\n", DVB_MAJOR); return retval; } cdev_init(&dvb_device_cdev, &dvb_device_fops); if ((retval = cdev_add(&dvb_device_cdev, dev, MAX_DVB_MINORS)) != 0) { - printk(KERN_ERR "dvb-core: unable register character device\n"); + pr_err("dvb-core: unable register character device\n"); goto error; } diff --git a/drivers/media/dvb-frontends/au8522_common.c b/drivers/media/dvb-frontends/au8522_common.c index f135126bc373..cf4ac240a01f 100644 --- a/drivers/media/dvb-frontends/au8522_common.c +++ b/drivers/media/dvb-frontends/au8522_common.c @@ -50,8 +50,8 @@ int au8522_writereg(struct au8522_state *state, u16 reg, u8 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, " - "ret == %i)\n", __func__, reg, data, ret); + printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } diff --git a/drivers/media/dvb-frontends/cx24110.c b/drivers/media/dvb-frontends/cx24110.c index 6cb81ec12847..92a08c7bf794 100644 --- a/drivers/media/dvb-frontends/cx24110.c +++ b/drivers/media/dvb-frontends/cx24110.c @@ -120,8 +120,8 @@ static int cx24110_writereg (struct cx24110_state* state, int reg, int data) int err; if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - dprintk ("%s: writereg error (err == %i, reg == 0x%02x," - " data == 0x%02x)\n", __func__, err, reg, data); + dprintk("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", + __func__, err, reg, data); return -EREMOTEIO; } diff --git a/drivers/media/dvb-frontends/cx24113.c b/drivers/media/dvb-frontends/cx24113.c index 3883c3b31aef..3812ef8cac08 100644 --- a/drivers/media/dvb-frontends/cx24113.c +++ b/drivers/media/dvb-frontends/cx24113.c @@ -108,8 +108,8 @@ static int cx24113_writereg(struct cx24113_state *state, int reg, int data) .flags = 0, .buf = buf, .len = 2 }; int err = i2c_transfer(state->i2c, &msg, 1); if (err != 1) { - printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x," - " data == 0x%02x)\n", __func__, err, reg, data); + printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n", + __func__, err, reg, data); return err; } diff --git a/drivers/media/dvb-frontends/cx24116.c b/drivers/media/dvb-frontends/cx24116.c index 8814f36d53fb..ae5a7f9f5a72 100644 --- a/drivers/media/dvb-frontends/cx24116.c +++ b/drivers/media/dvb-frontends/cx24116.c @@ -209,8 +209,8 @@ static int cx24116_writereg(struct cx24116_state *state, int reg, int data) err = i2c_transfer(state->i2c, &msg, 1); if (err != 1) { - printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x," - " value == 0x%02x)\n", __func__, err, reg, data); + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n", + __func__, err, reg, data); return -EREMOTEIO; } @@ -498,8 +498,8 @@ static int cx24116_firmware_ondemand(struct dvb_frontend *fe) printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__); if (ret) { - printk(KERN_ERR "%s: No firmware uploaded " - "(timeout or file not found?)\n", __func__); + printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", + __func__); return ret; } diff --git a/drivers/media/dvb-frontends/cx24117.c b/drivers/media/dvb-frontends/cx24117.c index a3f7eb4e609d..bc3cd698303f 100644 --- a/drivers/media/dvb-frontends/cx24117.c +++ b/drivers/media/dvb-frontends/cx24117.c @@ -474,8 +474,8 @@ static int cx24117_firmware_ondemand(struct dvb_frontend *fe) "%s: Waiting for firmware upload(2)...\n", __func__); if (ret) { dev_err(&state->priv->i2c->dev, - "%s: No firmware uploaded " - "(timeout or file not found?)\n", __func__); + "%s: No firmware uploaded (timeout or file not found?)\n", +__func__); return ret; } diff --git a/drivers/media/dvb-frontends/cx24120.c b/drivers/media/dvb-frontends/cx24120.c index 066ee387bf25..3112a3206d46 100644 --- a/drivers/media/dvb-frontends/cx24120.c +++ b/drivers/media/dvb-frontends/cx24120.c @@ -1154,8 +1154,7 @@ static int cx24120_set_frontend(struct dvb_frontend *fe) dev_dbg(&state->i2c->dev, "delivery system(%d) not supported\n", c->delivery_system); - ret = -EINVAL; - break; + return -EINVAL; } state->dnxt.delsys = c->delivery_system; diff --git a/drivers/media/dvb-frontends/cx24123.c b/drivers/media/dvb-frontends/cx24123.c index 113b0949408a..b1287de98e86 100644 --- a/drivers/media/dvb-frontends/cx24123.c +++ b/drivers/media/dvb-frontends/cx24123.c @@ -255,8 +255,8 @@ static int cx24123_i2c_writereg(struct cx24123_state *state, err = i2c_transfer(state->i2c, &msg, 1); if (err != 1) { - printk("%s: writereg error(err == %i, reg == 0x%02x," - " data == 0x%02x)\n", __func__, err, reg, data); + printk("%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n", + __func__, err, reg, data); return err; } diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c index 447b518e287a..6dc79d4528c2 100644 --- a/drivers/media/dvb-frontends/ds3000.c +++ b/drivers/media/dvb-frontends/ds3000.c @@ -248,8 +248,8 @@ static int ds3000_writereg(struct ds3000_state *state, int reg, int data) err = i2c_transfer(state->i2c, &msg, 1); if (err != 1) { - printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x," - " value == 0x%02x)\n", __func__, err, reg, data); + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n", + __func__, err, reg, data); return -EREMOTEIO; } @@ -296,8 +296,8 @@ static int ds3000_writeFW(struct ds3000_state *state, int reg, ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) { - printk(KERN_ERR "%s: write error(err == %i, " - "reg == 0x%02x\n", __func__, ret, reg); + printk(KERN_ERR "%s: write error(err == %i, reg == 0x%02x\n", + __func__, ret, reg); ret = -EREMOTEIO; goto error; } @@ -364,8 +364,8 @@ static int ds3000_firmware_ondemand(struct dvb_frontend *fe) state->i2c->dev.parent); printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__); if (ret) { - printk(KERN_ERR "%s: No firmware uploaded (timeout or file not " - "found?)\n", __func__); + printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n", + __func__); return ret; } @@ -1144,8 +1144,7 @@ static struct dvb_frontend_ops ds3000_ops = { module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); -MODULE_DESCRIPTION("DVB Frontend module for Montage Technology " - "DS3000 hardware"); +MODULE_DESCRIPTION("DVB Frontend module for Montage Technology DS3000 hardware"); MODULE_AUTHOR("Konstantin Dimitrov <kosio.dimitrov@gmail.com>"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(DS3000_DEFAULT_FIRMWARE); diff --git a/drivers/media/dvb-frontends/dvb-pll.c b/drivers/media/dvb-frontends/dvb-pll.c index 735a96662022..b6d199196b83 100644 --- a/drivers/media/dvb-frontends/dvb-pll.c +++ b/drivers/media/dvb-frontends/dvb-pll.c @@ -18,6 +18,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/slab.h> #include <linux/module.h> #include <linux/dvb/frontend.h> @@ -25,6 +27,9 @@ #include "dvb-pll.h" +#define dprintk(fmt, arg...) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg) + struct dvb_pll_priv { /* pll number */ int nr; @@ -362,7 +367,7 @@ static void opera1_bw(struct dvb_frontend *fe, u8 *buf) result = i2c_transfer(priv->i2c, &msg, 1); if (result != 1) - printk(KERN_ERR "%s: i2c_transfer failed:%d", + pr_err("%s: i2c_transfer failed:%d", __func__, result); if (b_w <= 10000) @@ -432,7 +437,7 @@ static void samsung_dtos403ih102a_set(struct dvb_frontend *fe, u8 *buf) result = i2c_transfer(priv->i2c, &msg, 1); if (result != 1) - printk(KERN_ERR "%s: i2c_transfer failed:%d", + pr_err("%s: i2c_transfer failed:%d", __func__, result); buf[2] = 0x9e; @@ -578,7 +583,7 @@ static int dvb_pll_configure(struct dvb_frontend *fe, u8 *buf, } if (debug) - printk("pll: %s: freq=%d | i=%d/%d\n", desc->name, + dprintk("pll: %s: freq=%d | i=%d/%d\n", desc->name, frequency, i, desc->count); if (i == desc->count) return -EINVAL; @@ -594,7 +599,7 @@ static int dvb_pll_configure(struct dvb_frontend *fe, u8 *buf, desc->set(fe, buf); if (debug) - printk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n", + dprintk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n", desc->name, div, buf[0], buf[1], buf[2], buf[3]); // calculate the frequency we set it to @@ -803,10 +808,10 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, fe->tuner_priv = priv; if ((debug) || (id[priv->nr] == pll_desc_id)) { - printk("dvb-pll[%d]", priv->nr); + dprintk("dvb-pll[%d]", priv->nr); if (i2c != NULL) - printk(" %d-%04x", i2c_adapter_id(i2c), pll_addr); - printk(": id# %d (%s) attached, %s\n", pll_desc_id, desc->name, + pr_cont(" %d-%04x", i2c_adapter_id(i2c), pll_addr); + pr_cont(": id# %d (%s) attached, %s\n", pll_desc_id, desc->name, id[priv->nr] == pll_desc_id ? "insmod option" : "autodetected"); } diff --git a/drivers/media/dvb-frontends/lgdt330x.c b/drivers/media/dvb-frontends/lgdt330x.c index 96bf254da21e..8cb6c56d220a 100644 --- a/drivers/media/dvb-frontends/lgdt330x.c +++ b/drivers/media/dvb-frontends/lgdt330x.c @@ -405,8 +405,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend *fe) return -1; } if (err < 0) - printk(KERN_WARNING "lgdt330x: %s: error blasting " - "bytes to lgdt3303 for modulation type(%d)\n", + printk(KERN_WARNING "lgdt330x: %s: error blasting bytes to lgdt3303 for modulation type(%d)\n", __func__, p->modulation); /* diff --git a/drivers/media/dvb-frontends/m88rs2000.c b/drivers/media/dvb-frontends/m88rs2000.c index ef79a4ec31e2..3669c906ba01 100644 --- a/drivers/media/dvb-frontends/m88rs2000.c +++ b/drivers/media/dvb-frontends/m88rs2000.c @@ -75,8 +75,8 @@ static int m88rs2000_writereg(struct m88rs2000_state *state, ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, " - "ret == %i)\n", __func__, reg, data, ret); + deb_info("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -EREMOTEIO : 0; } @@ -618,10 +618,9 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe) state->no_lock_count = 0; if (c->delivery_system != SYS_DVBS) { - deb_info("%s: unsupported delivery " - "system selected (%d)\n", - __func__, c->delivery_system); - return -EOPNOTSUPP; + deb_info("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; } /* Set Tuner */ diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c index fe79358b035e..27f425137ce6 100644 --- a/drivers/media/dvb-frontends/mb86a20s.c +++ b/drivers/media/dvb-frontends/mb86a20s.c @@ -1967,6 +1967,7 @@ static int mb86a20s_read_status_and_stats(struct dvb_frontend *fe, if (status_nr < 0) { dev_err(&state->i2c->dev, "%s: Can't read frontend lock status\n", __func__); + rc = status_nr; goto error; } diff --git a/drivers/media/dvb-frontends/mt312.c b/drivers/media/dvb-frontends/mt312.c index fc08429c99b7..fdee75b1b99a 100644 --- a/drivers/media/dvb-frontends/mt312.c +++ b/drivers/media/dvb-frontends/mt312.c @@ -457,8 +457,8 @@ static int mt312_read_status(struct dvb_frontend *fe, enum fe_status *s) if (ret < 0) return ret; - dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x," - " FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]); + dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n", + status[0], status[1], status[2]); if (status[0] & 0xc0) *s |= FE_HAS_SIGNAL; /* signal noise ratio */ @@ -827,8 +827,7 @@ struct dvb_frontend *mt312_attach(const struct mt312_config *config, state->freq_mult = 9; break; default: - printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313" - " are supported chips.\n"); + printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313 are supported chips.\n"); goto error; } diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c index 79c3040912ab..7c23f0499f23 100644 --- a/drivers/media/dvb-frontends/nxt200x.c +++ b/drivers/media/dvb-frontends/nxt200x.c @@ -289,8 +289,7 @@ static void nxt200x_microcontroller_stop (struct nxt200x_state* state) counter++; } - pr_warn("Timeout waiting for nxt200x to stop. This is ok after " - "firmware upload.\n"); + pr_warn("Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n"); return; } @@ -893,8 +892,8 @@ static int nxt2002_init(struct dvb_frontend* fe) state->i2c->dev.parent); pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); if (ret) { - pr_err("%s: No firmware uploaded (timeout or file not found?)" - "\n", __func__); + pr_err("%s: No firmware uploaded (timeout or file not found?)\n", + __func__); return ret; } @@ -960,8 +959,8 @@ static int nxt2004_init(struct dvb_frontend* fe) state->i2c->dev.parent); pr_debug("%s: Waiting for firmware upload(2)...\n", __func__); if (ret) { - pr_err("%s: No firmware uploaded (timeout or file not found?)" - "\n", __func__); + pr_err("%s: No firmware uploaded (timeout or file not found?)\n", + __func__); return ret; } diff --git a/drivers/media/dvb-frontends/nxt6000.c b/drivers/media/dvb-frontends/nxt6000.c index 73f9505367ac..1545d898b125 100644 --- a/drivers/media/dvb-frontends/nxt6000.c +++ b/drivers/media/dvb-frontends/nxt6000.c @@ -19,6 +19,8 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> @@ -39,7 +41,11 @@ struct nxt6000_state { }; static int debug; -#define dprintk if (debug) printk +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data) { @@ -215,119 +221,129 @@ static void nxt6000_dump_status(struct nxt6000_state *state) { u8 val; -/* - printk("RS_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, RS_COR_STAT)); - printk("VIT_SYNC_STATUS: 0x%02X\n", nxt6000_readreg(fe, VIT_SYNC_STATUS)); - printk("OFDM_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_COR_STAT)); - printk("OFDM_SYR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_SYR_STAT)); - printk("OFDM_TPS_RCVD_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_1)); - printk("OFDM_TPS_RCVD_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_2)); - printk("OFDM_TPS_RCVD_3: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_3)); - printk("OFDM_TPS_RCVD_4: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_4)); - printk("OFDM_TPS_RESERVED_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_1)); - printk("OFDM_TPS_RESERVED_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_2)); -*/ - printk("NXT6000 status:"); +#if 0 + pr_info("RS_COR_STAT: 0x%02X\n", + nxt6000_readreg(fe, RS_COR_STAT)); + pr_info("VIT_SYNC_STATUS: 0x%02X\n", + nxt6000_readreg(fe, VIT_SYNC_STATUS)); + pr_info("OFDM_COR_STAT: 0x%02X\n", + nxt6000_readreg(fe, OFDM_COR_STAT)); + pr_info("OFDM_SYR_STAT: 0x%02X\n", + nxt6000_readreg(fe, OFDM_SYR_STAT)); + pr_info("OFDM_TPS_RCVD_1: 0x%02X\n", + nxt6000_readreg(fe, OFDM_TPS_RCVD_1)); + pr_info("OFDM_TPS_RCVD_2: 0x%02X\n", + nxt6000_readreg(fe, OFDM_TPS_RCVD_2)); + pr_info("OFDM_TPS_RCVD_3: 0x%02X\n", + nxt6000_readreg(fe, OFDM_TPS_RCVD_3)); + pr_info("OFDM_TPS_RCVD_4: 0x%02X\n", + nxt6000_readreg(fe, OFDM_TPS_RCVD_4)); + pr_info("OFDM_TPS_RESERVED_1: 0x%02X\n", + nxt6000_readreg(fe, OFDM_TPS_RESERVED_1)); + pr_info("OFDM_TPS_RESERVED_2: 0x%02X\n", + nxt6000_readreg(fe, OFDM_TPS_RESERVED_2)); +#endif + pr_info("NXT6000 status:"); val = nxt6000_readreg(state, RS_COR_STAT); - printk(" DATA DESCR LOCK: %d,", val & 0x01); - printk(" DATA SYNC LOCK: %d,", (val >> 1) & 0x01); + pr_cont(" DATA DESCR LOCK: %d,", val & 0x01); + pr_cont(" DATA SYNC LOCK: %d,", (val >> 1) & 0x01); val = nxt6000_readreg(state, VIT_SYNC_STATUS); - printk(" VITERBI LOCK: %d,", (val >> 7) & 0x01); + pr_cont(" VITERBI LOCK: %d,", (val >> 7) & 0x01); switch ((val >> 4) & 0x07) { case 0x00: - printk(" VITERBI CODERATE: 1/2,"); + pr_cont(" VITERBI CODERATE: 1/2,"); break; case 0x01: - printk(" VITERBI CODERATE: 2/3,"); + pr_cont(" VITERBI CODERATE: 2/3,"); break; case 0x02: - printk(" VITERBI CODERATE: 3/4,"); + pr_cont(" VITERBI CODERATE: 3/4,"); break; case 0x03: - printk(" VITERBI CODERATE: 5/6,"); + pr_cont(" VITERBI CODERATE: 5/6,"); break; case 0x04: - printk(" VITERBI CODERATE: 7/8,"); + pr_cont(" VITERBI CODERATE: 7/8,"); break; default: - printk(" VITERBI CODERATE: Reserved,"); + pr_cont(" VITERBI CODERATE: Reserved,"); } val = nxt6000_readreg(state, OFDM_COR_STAT); - printk(" CHCTrack: %d,", (val >> 7) & 0x01); - printk(" TPSLock: %d,", (val >> 6) & 0x01); - printk(" SYRLock: %d,", (val >> 5) & 0x01); - printk(" AGCLock: %d,", (val >> 4) & 0x01); + pr_cont(" CHCTrack: %d,", (val >> 7) & 0x01); + pr_cont(" TPSLock: %d,", (val >> 6) & 0x01); + pr_cont(" SYRLock: %d,", (val >> 5) & 0x01); + pr_cont(" AGCLock: %d,", (val >> 4) & 0x01); switch (val & 0x0F) { case 0x00: - printk(" CoreState: IDLE,"); + pr_cont(" CoreState: IDLE,"); break; case 0x02: - printk(" CoreState: WAIT_AGC,"); + pr_cont(" CoreState: WAIT_AGC,"); break; case 0x03: - printk(" CoreState: WAIT_SYR,"); + pr_cont(" CoreState: WAIT_SYR,"); break; case 0x04: - printk(" CoreState: WAIT_PPM,"); + pr_cont(" CoreState: WAIT_PPM,"); break; case 0x01: - printk(" CoreState: WAIT_TRL,"); + pr_cont(" CoreState: WAIT_TRL,"); break; case 0x05: - printk(" CoreState: WAIT_TPS,"); + pr_cont(" CoreState: WAIT_TPS,"); break; case 0x06: - printk(" CoreState: MONITOR_TPS,"); + pr_cont(" CoreState: MONITOR_TPS,"); break; default: - printk(" CoreState: Reserved,"); + pr_cont(" CoreState: Reserved,"); } val = nxt6000_readreg(state, OFDM_SYR_STAT); - printk(" SYRLock: %d,", (val >> 4) & 0x01); - printk(" SYRMode: %s,", (val >> 2) & 0x01 ? "8K" : "2K"); + pr_cont(" SYRLock: %d,", (val >> 4) & 0x01); + pr_cont(" SYRMode: %s,", (val >> 2) & 0x01 ? "8K" : "2K"); switch ((val >> 4) & 0x03) { case 0x00: - printk(" SYRGuard: 1/32,"); + pr_cont(" SYRGuard: 1/32,"); break; case 0x01: - printk(" SYRGuard: 1/16,"); + pr_cont(" SYRGuard: 1/16,"); break; case 0x02: - printk(" SYRGuard: 1/8,"); + pr_cont(" SYRGuard: 1/8,"); break; case 0x03: - printk(" SYRGuard: 1/4,"); + pr_cont(" SYRGuard: 1/4,"); break; } @@ -336,77 +352,77 @@ static void nxt6000_dump_status(struct nxt6000_state *state) switch ((val >> 4) & 0x07) { case 0x00: - printk(" TPSLP: 1/2,"); + pr_cont(" TPSLP: 1/2,"); break; case 0x01: - printk(" TPSLP: 2/3,"); + pr_cont(" TPSLP: 2/3,"); break; case 0x02: - printk(" TPSLP: 3/4,"); + pr_cont(" TPSLP: 3/4,"); break; case 0x03: - printk(" TPSLP: 5/6,"); + pr_cont(" TPSLP: 5/6,"); break; case 0x04: - printk(" TPSLP: 7/8,"); + pr_cont(" TPSLP: 7/8,"); break; default: - printk(" TPSLP: Reserved,"); + pr_cont(" TPSLP: Reserved,"); } switch (val & 0x07) { case 0x00: - printk(" TPSHP: 1/2,"); + pr_cont(" TPSHP: 1/2,"); break; case 0x01: - printk(" TPSHP: 2/3,"); + pr_cont(" TPSHP: 2/3,"); break; case 0x02: - printk(" TPSHP: 3/4,"); + pr_cont(" TPSHP: 3/4,"); break; case 0x03: - printk(" TPSHP: 5/6,"); + pr_cont(" TPSHP: 5/6,"); break; case 0x04: - printk(" TPSHP: 7/8,"); + pr_cont(" TPSHP: 7/8,"); break; default: - printk(" TPSHP: Reserved,"); + pr_cont(" TPSHP: Reserved,"); } val = nxt6000_readreg(state, OFDM_TPS_RCVD_4); - printk(" TPSMode: %s,", val & 0x01 ? "8K" : "2K"); + pr_cont(" TPSMode: %s,", val & 0x01 ? "8K" : "2K"); switch ((val >> 4) & 0x03) { case 0x00: - printk(" TPSGuard: 1/32,"); + pr_cont(" TPSGuard: 1/32,"); break; case 0x01: - printk(" TPSGuard: 1/16,"); + pr_cont(" TPSGuard: 1/16,"); break; case 0x02: - printk(" TPSGuard: 1/8,"); + pr_cont(" TPSGuard: 1/8,"); break; case 0x03: - printk(" TPSGuard: 1/4,"); + pr_cont(" TPSGuard: 1/4,"); break; } @@ -416,8 +432,8 @@ static void nxt6000_dump_status(struct nxt6000_state *state) val = nxt6000_readreg(state, RF_AGC_STATUS); val = nxt6000_readreg(state, RF_AGC_STATUS); - printk(" RF AGC LOCK: %d,", (val >> 4) & 0x01); - printk("\n"); + pr_cont(" RF AGC LOCK: %d,", (val >> 4) & 0x01); + pr_cont("\n"); } static int nxt6000_read_status(struct dvb_frontend *fe, enum fe_status *status) diff --git a/drivers/media/dvb-frontends/or51132.c b/drivers/media/dvb-frontends/or51132.c index a165af990672..bacea20822ea 100644 --- a/drivers/media/dvb-frontends/or51132.c +++ b/drivers/media/dvb-frontends/or51132.c @@ -342,15 +342,13 @@ static int or51132_set_parameters(struct dvb_frontend *fe) fwname); ret = request_firmware(&fw, fwname, state->i2c->dev.parent); if (ret) { - printk(KERN_WARNING "or51132: No firmware up" - "loaded(timeout or file not found?)\n"); + printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n"); return ret; } ret = or51132_load_firmware(fe, fw); release_firmware(fw); if (ret) { - printk(KERN_WARNING "or51132: Writing firmware to " - "device failed!\n"); + printk(KERN_WARNING "or51132: Writing firmware to device failed!\n"); return ret; } printk("or51132: Firmware upload complete.\n"); diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index e82413b975e6..839479eab3b3 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -377,8 +377,7 @@ static int or51211_init(struct dvb_frontend* fe) OR51211_DEFAULT_FIRMWARE); pr_info("Got Hotplug firmware\n"); if (ret) { - pr_warn("No firmware uploaded " - "(timeout or file not found?)\n"); + pr_warn("No firmware uploaded (timeout or file not found?)\n"); return ret; } diff --git a/drivers/media/dvb-frontends/s5h1409.c b/drivers/media/dvb-frontends/s5h1409.c index c68965ad97c0..56c3fb442d6c 100644 --- a/drivers/media/dvb-frontends/s5h1409.c +++ b/drivers/media/dvb-frontends/s5h1409.c @@ -321,8 +321,8 @@ static int s5h1409_writereg(struct s5h1409_state *state, u8 reg, u16 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, " - "ret == %i)\n", __func__, reg, data, ret); + printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } diff --git a/drivers/media/dvb-frontends/s5h1411.c b/drivers/media/dvb-frontends/s5h1411.c index 90f86e82b087..a861854981b7 100644 --- a/drivers/media/dvb-frontends/s5h1411.c +++ b/drivers/media/dvb-frontends/s5h1411.c @@ -350,8 +350,8 @@ static int s5h1411_writereg(struct s5h1411_state *state, ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, " - "ret == %i)\n", __func__, addr, reg, data, ret); + printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n", + __func__, addr, reg, data, ret); return (ret != 1) ? -1 : 0; } diff --git a/drivers/media/dvb-frontends/s5h1432.c b/drivers/media/dvb-frontends/s5h1432.c index 4215652f8eb7..5de79739cf63 100644 --- a/drivers/media/dvb-frontends/s5h1432.c +++ b/drivers/media/dvb-frontends/s5h1432.c @@ -63,8 +63,8 @@ static int s5h1432_writereg(struct s5h1432_state *state, ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, " - "ret == %i)\n", __func__, addr, reg, data, ret); + printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n", + __func__, addr, reg, data, ret); return (ret != 1) ? -1 : 0; } diff --git a/drivers/media/dvb-frontends/s921.c b/drivers/media/dvb-frontends/s921.c index b5e3d90eba5e..98cceb149b91 100644 --- a/drivers/media/dvb-frontends/s921.c +++ b/drivers/media/dvb-frontends/s921.c @@ -214,8 +214,8 @@ static int s921_i2c_writereg(struct s921_state *state, rc = i2c_transfer(state->i2c, &msg, 1); if (rc != 1) { - printk("%s: writereg rcor(rc == %i, reg == 0x%02x," - " data == 0x%02x)\n", __func__, rc, reg, data); + printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n", + __func__, rc, reg, data); return rc; } diff --git a/drivers/media/dvb-frontends/si21xx.c b/drivers/media/dvb-frontends/si21xx.c index 62ad7a7be9f8..32ebfb78bfdd 100644 --- a/drivers/media/dvb-frontends/si21xx.c +++ b/drivers/media/dvb-frontends/si21xx.c @@ -245,8 +245,8 @@ static int si21_writeregs(struct si21xx_state *state, u8 reg1, ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, " - "ret == %i)\n", __func__, reg1, data[0], ret); + dprintk("%s: writereg error (reg1 == 0x%02x, data == 0x%02x, ret == %i)\n", + __func__, reg1, data[0], ret); return (ret != 1) ? -EREMOTEIO : 0; } @@ -265,8 +265,8 @@ static int si21_writereg(struct si21xx_state *state, u8 reg, u8 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, " - "ret == %i)\n", __func__, reg, data, ret); + dprintk("%s: writereg error (reg == 0x%02x, data == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -EREMOTEIO : 0; } diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c index 4378fe1b978e..f9194b7b7fec 100644 --- a/drivers/media/dvb-frontends/sp887x.c +++ b/drivers/media/dvb-frontends/sp887x.c @@ -63,8 +63,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data) if (!(reg == 0xf1a && data == 0x000 && (ret == -EREMOTEIO || ret == -EFAULT))) { - printk("%s: writereg error " - "(reg %03x, data %03x, ret == %i)\n", + printk("%s: writereg error (reg %03x, data %03x, ret == %i)\n", __func__, reg & 0xffff, data & 0xffff, ret); return ret; } diff --git a/drivers/media/dvb-frontends/stv0288.c b/drivers/media/dvb-frontends/stv0288.c index c93d9a45f7f7..12f6a4205e3e 100644 --- a/drivers/media/dvb-frontends/stv0288.c +++ b/drivers/media/dvb-frontends/stv0288.c @@ -74,8 +74,8 @@ static int stv0288_writeregI(struct stv0288_state *state, u8 reg, u8 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " - "ret == %i)\n", __func__, reg, data, ret); + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -EREMOTEIO : 0; } @@ -465,10 +465,9 @@ static int stv0288_set_frontend(struct dvb_frontend *fe) dprintk("%s : FE_SET_FRONTEND\n", __func__); if (c->delivery_system != SYS_DVBS) { - dprintk("%s: unsupported delivery " - "system selected (%d)\n", - __func__, c->delivery_system); - return -EOPNOTSUPP; + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; } if (state->config->set_ts_params) diff --git a/drivers/media/dvb-frontends/stv0297.c b/drivers/media/dvb-frontends/stv0297.c index 81b27b7c0c96..73b4d4243b74 100644 --- a/drivers/media/dvb-frontends/stv0297.c +++ b/drivers/media/dvb-frontends/stv0297.c @@ -57,8 +57,8 @@ static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " - "ret == %i)\n", __func__, reg, data, ret); + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } diff --git a/drivers/media/dvb-frontends/stv0299.c b/drivers/media/dvb-frontends/stv0299.c index 7927fa925f2f..a9b28ceb80d8 100644 --- a/drivers/media/dvb-frontends/stv0299.c +++ b/drivers/media/dvb-frontends/stv0299.c @@ -88,8 +88,8 @@ static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data) ret = i2c_transfer (state->i2c, &msg, 1); if (ret != 1) - dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " - "ret == %i)\n", __func__, reg, data, ret); + dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -EREMOTEIO : 0; } @@ -761,8 +761,7 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); MODULE_DESCRIPTION("ST STV0299 DVB Demodulator driver"); -MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, " - "Andreas Oberritter, Andrew de Quincey, Kenneth Aafly"); +MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Peter Schildmann, Felix Domke, Andreas Oberritter, Andrew de Quincey, Kenneth Aafly"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(stv0299_attach); diff --git a/drivers/media/dvb-frontends/stv0900_sw.c b/drivers/media/dvb-frontends/stv0900_sw.c index fa63a9e929ce..bded82774f4b 100644 --- a/drivers/media/dvb-frontends/stv0900_sw.c +++ b/drivers/media/dvb-frontends/stv0900_sw.c @@ -1485,8 +1485,7 @@ static u32 stv0900_search_srate_coarse(struct dvb_frontend *fe) current_step++; direction *= -1; - dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started." - " tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n", + dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started. tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n", tuner_freq, agc2_integr, coarse_srate, timingcpt); if ((timingcpt >= 5) && diff --git a/drivers/media/dvb-frontends/tc90522.c b/drivers/media/dvb-frontends/tc90522.c index 31cd32532387..4687e1546af2 100644 --- a/drivers/media/dvb-frontends/tc90522.c +++ b/drivers/media/dvb-frontends/tc90522.c @@ -656,7 +656,7 @@ tc90522_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) for (i = 0; i < num; i++) if (msgs[i].flags & I2C_M_RD) rd_num++; - new_msgs = kmalloc(sizeof(*new_msgs) * (num + rd_num), GFP_KERNEL); + new_msgs = kmalloc_array(num + rd_num, sizeof(*new_msgs), GFP_KERNEL); if (!new_msgs) return -ENOMEM; @@ -794,14 +794,13 @@ static int tc90522_probe(struct i2c_client *client, i2c_set_adapdata(adap, state); ret = i2c_add_adapter(adap); if (ret < 0) - goto err; + goto free_state; cfg->tuner_i2c = state->cfg.tuner_i2c = adap; i2c_set_clientdata(client, &state->cfg); dev_info(&client->dev, "Toshiba TC90522 attached.\n"); return 0; - -err: +free_state: kfree(state); return ret; } diff --git a/drivers/media/dvb-frontends/tda10021.c b/drivers/media/dvb-frontends/tda10021.c index 806c56691ca5..4c514e6bffda 100644 --- a/drivers/media/dvb-frontends/tda10021.c +++ b/drivers/media/dvb-frontends/tda10021.c @@ -77,8 +77,7 @@ static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data) ret = i2c_transfer (state->i2c, &msg, 1); if (ret != 1) - printk("DVB: TDA10021(%d): %s, writereg error " - "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", + printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", state->frontend.dvb->num, __func__, reg, data, ret); msleep(10); diff --git a/drivers/media/dvb-frontends/tda10023.c b/drivers/media/dvb-frontends/tda10023.c index 3b8c7e499d0d..0c416be76d65 100644 --- a/drivers/media/dvb-frontends/tda10023.c +++ b/drivers/media/dvb-frontends/tda10023.c @@ -72,8 +72,7 @@ static u8 tda10023_readreg (struct tda10023_state* state, u8 reg) ret = i2c_transfer (state->i2c, msg, 2); if (ret != 2) { int num = state->frontend.dvb ? state->frontend.dvb->num : -1; - printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error " - "(reg == 0x%02x, ret == %i)\n", + printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error (reg == 0x%02x, ret == %i)\n", num, __func__, reg, ret); } return b1[0]; @@ -88,8 +87,7 @@ static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data) ret = i2c_transfer (state->i2c, &msg, 1); if (ret != 1) { int num = state->frontend.dvb ? state->frontend.dvb->num : -1; - printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error " - "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", + printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", num, __func__, reg, data, ret); } return (ret != 1) ? -EREMOTEIO : 0; diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c index c2bf89d0b0b0..7cb23f89a03b 100644 --- a/drivers/media/dvb-frontends/tda10048.c +++ b/drivers/media/dvb-frontends/tda10048.c @@ -1063,32 +1063,28 @@ static void tda10048_establish_defaults(struct dvb_frontend *fe) /* Validate/default the config */ if (config->dtv6_if_freq_khz == 0) { config->dtv6_if_freq_khz = TDA10048_IF_4300; - printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz " - "is not set (defaulting to %d)\n", + printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz is not set (defaulting to %d)\n", __func__, config->dtv6_if_freq_khz); } if (config->dtv7_if_freq_khz == 0) { config->dtv7_if_freq_khz = TDA10048_IF_4300; - printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz " - "is not set (defaulting to %d)\n", + printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz is not set (defaulting to %d)\n", __func__, config->dtv7_if_freq_khz); } if (config->dtv8_if_freq_khz == 0) { config->dtv8_if_freq_khz = TDA10048_IF_4300; - printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz " - "is not set (defaulting to %d)\n", + printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz is not set (defaulting to %d)\n", __func__, config->dtv8_if_freq_khz); } if (config->clk_freq_khz == 0) { config->clk_freq_khz = TDA10048_CLK_16000; - printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz " - "is not set (defaulting to %d)\n", + printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz is not set (defaulting to %d)\n", __func__, config->clk_freq_khz); } diff --git a/drivers/media/dvb-frontends/ves1820.c b/drivers/media/dvb-frontends/ves1820.c index b09fe88c40f8..24ac54b3b967 100644 --- a/drivers/media/dvb-frontends/ves1820.c +++ b/drivers/media/dvb-frontends/ves1820.c @@ -65,8 +65,8 @@ static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk("ves1820: %s(): writereg error (reg == 0x%02x, " - "val == 0x%02x, ret == %i)\n", __func__, reg, data, ret); + printk("ves1820: %s(): writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + __func__, reg, data, ret); return (ret != 1) ? -EREMOTEIO : 0; } @@ -84,8 +84,8 @@ static u8 ves1820_readreg(struct ves1820_state *state, u8 reg) ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) - printk("ves1820: %s(): readreg error (reg == 0x%02x, " - "ret == %i)\n", __func__, reg, ret); + printk("ves1820: %s(): readreg error (reg == 0x%02x, ret == %i)\n", + __func__, reg, ret); return b1[0]; } diff --git a/drivers/media/dvb-frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c index 7ed81315965f..df5d0fe24687 100644 --- a/drivers/media/dvb-frontends/zl10036.c +++ b/drivers/media/dvb-frontends/zl10036.c @@ -85,8 +85,8 @@ static int zl10036_read_status_reg(struct zl10036_state *state) deb_i2c("R(status): %02x [FL=%d]\n", status, (status & STATUS_FL) ? 1 : 0); if (status & STATUS_POR) - deb_info("%s: Power-On-Reset bit enabled - " - "need to initialize the tuner\n", __func__); + deb_info("%s: Power-On-Reset bit enabled - need to initialize the tuner\n", + __func__); return status; } diff --git a/drivers/media/dvb-frontends/zl10039.c b/drivers/media/dvb-frontends/zl10039.c index f8c271be196c..d6ded11fee49 100644 --- a/drivers/media/dvb-frontends/zl10039.c +++ b/drivers/media/dvb-frontends/zl10039.c @@ -152,8 +152,7 @@ static int zl10039_init(struct dvb_frontend *fe) /* Reset logic */ ret = zl10039_writereg(state, GENERAL, 0x40); if (ret < 0) { - dprintk("Note: i2c write error normal when resetting the " - "tuner\n"); + dprintk("Note: i2c write error normal when resetting the tuner\n"); } /* Wake up */ ret = zl10039_writereg(state, GENERAL, 0x01); diff --git a/drivers/media/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c index 251a556112a9..5bde6c209cd7 100644 --- a/drivers/media/firewire/firedtv-avc.c +++ b/drivers/media/firewire/firedtv-avc.c @@ -1181,8 +1181,8 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) if (es_info_length > 0) { pmt_cmd_id = msg[read_pos++]; if (pmt_cmd_id != 1 && pmt_cmd_id != 4) - dev_err(fdtv->device, "invalid pmt_cmd_id %d " - "at stream level\n", pmt_cmd_id); + dev_err(fdtv->device, "invalid pmt_cmd_id %d at stream level\n", + pmt_cmd_id); if (es_info_length > sizeof(c->operand) - 4 - write_pos) { diff --git a/drivers/media/firewire/firedtv-rc.c b/drivers/media/firewire/firedtv-rc.c index f82d4a93feb3..04dea2aac583 100644 --- a/drivers/media/firewire/firedtv-rc.c +++ b/drivers/media/firewire/firedtv-rc.c @@ -184,8 +184,9 @@ void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) else if (code >= 0x4540 && code <= 0x4542) code = oldtable[code - 0x4521]; else { - printk(KERN_DEBUG "firedtv: invalid key code 0x%04x " - "from remote control\n", code); + dev_dbg(fdtv->device, + "invalid key code 0x%04x from remote control\n", + code); return; } diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 2669b4bad910..b31fa6fae009 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -221,7 +221,7 @@ config VIDEO_ADV7604 config VIDEO_ADV7604_CEC bool "Enable Analog Devices ADV7604 CEC support" - depends on VIDEO_ADV7604 && MEDIA_CEC + depends on VIDEO_ADV7604 && MEDIA_CEC_SUPPORT ---help--- When selected the adv7604 will support the optional HDMI CEC feature. @@ -242,7 +242,7 @@ config VIDEO_ADV7842 config VIDEO_ADV7842_CEC bool "Enable Analog Devices ADV7842 CEC support" - depends on VIDEO_ADV7842 && MEDIA_CEC + depends on VIDEO_ADV7842 && MEDIA_CEC_SUPPORT ---help--- When selected the adv7842 will support the optional HDMI CEC feature. @@ -481,7 +481,7 @@ config VIDEO_ADV7511 config VIDEO_ADV7511_CEC bool "Enable Analog Devices ADV7511 CEC support" - depends on VIDEO_ADV7511 && MEDIA_CEC + depends on VIDEO_ADV7511 && MEDIA_CEC_SUPPORT ---help--- When selected the adv7511 will support the optional HDMI CEC feature. diff --git a/drivers/media/i2c/ad5820.c b/drivers/media/i2c/ad5820.c index beab2f381b81..a9026a91855e 100644 --- a/drivers/media/i2c/ad5820.c +++ b/drivers/media/i2c/ad5820.c @@ -65,16 +65,17 @@ static int ad5820_write(struct ad5820_device *coil, u16 data) { struct i2c_client *client = v4l2_get_subdevdata(&coil->subdev); struct i2c_msg msg; + __be16 be_data; int r; if (!client->adapter) return -ENODEV; - data = cpu_to_be16(data); + be_data = cpu_to_be16(data); msg.addr = client->addr; msg.flags = 0; msg.len = 2; - msg.buf = (u8 *)&data; + msg.buf = (u8 *)&be_data; r = i2c_transfer(client->adapter, &msg, 1); if (r < 0) { diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 4003831de712..5630eb22daaa 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -1566,10 +1566,24 @@ static int adv76xx_query_dv_timings(struct v4l2_subdev *sd, V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE; if (is_digital_input(sd)) { + bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80; + u8 vic = 0; + u32 w, h; + + w = hdmi_read16(sd, 0x07, info->linewidth_mask); + h = hdmi_read16(sd, 0x09, info->field0_height_mask); + + if (hdmi_signal && (io_read(sd, 0x60) & 1)) + vic = infoframe_read(sd, 0x04); + + if (vic && v4l2_find_dv_timings_cea861_vic(timings, vic) && + bt->width == w && bt->height == h) + goto found; + timings->type = V4L2_DV_BT_656_1120; - bt->width = hdmi_read16(sd, 0x07, info->linewidth_mask); - bt->height = hdmi_read16(sd, 0x09, info->field0_height_mask); + bt->width = w; + bt->height = h; bt->pixelclock = info->read_hdmi_pixelclock(sd); bt->hfrontporch = hdmi_read16(sd, 0x20, info->hfrontporch_mask); bt->hsync = hdmi_read16(sd, 0x22, info->hsync_mask); @@ -3074,13 +3088,13 @@ static int adv76xx_parse_dt(struct adv76xx_state *state) return ret; } - if (!of_property_read_u32(endpoint, "default-input", &v)) + of_node_put(endpoint); + + if (!of_property_read_u32(np, "default-input", &v)) state->pdata.default_input = v; else state->pdata.default_input = -1; - of_node_put(endpoint); - flags = bus_cfg.bus.parallel.flags; if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index 142ae28803bb..0dcf450052ac 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -873,10 +873,7 @@ void cx25840_std_setup(struct i2c_client *client) "Chroma sub-carrier freq = %d.%06d MHz\n", fsc / 1000000, fsc % 1000000); - v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, " - "vblank %i, vactive %i, vblank656 %i, src_dec %i, " - "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, " - "sc 0x%06x\n", + v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n", hblank, hactive, vblank, vactive, vblank656, src_decimation, burst, luma_lpf, uv_lpf, comb, sc); } @@ -5169,11 +5166,9 @@ static int cx25840_probe(struct i2c_client *client, id = CX2310X_AV; } else if ((device_id & 0xff) == (device_id >> 8)) { v4l_err(client, - "likely a confused/unresponsive cx2388[578] A/V decoder" - " found @ 0x%x (%s)\n", + "likely a confused/unresponsive cx2388[578] A/V decoder found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); - v4l_err(client, "A method to reset it from the cx25840 driver" - " software is not known at this time\n"); + v4l_err(client, "A method to reset it from the cx25840 driver software is not known at this time\n"); return -ENODEV; } else { v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n"); diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c index 4b782012cadc..15fbd9607cee 100644 --- a/drivers/media/i2c/cx25840/cx25840-ir.c +++ b/drivers/media/i2c/cx25840/cx25840-ir.c @@ -1113,8 +1113,8 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd) j = 0; break; } - v4l2_info(sd, "\tNext carrier edge window: 16 clocks " - "-%1d/+%1d, %u to %u Hz\n", i, j, + v4l2_info(sd, "\tNext carrier edge window: 16 clocks -%1d/+%1d, %u to %u Hz\n", + i, j, clock_divider_to_freq(rxclk, 16 + j), clock_divider_to_freq(rxclk, 16 - i)); } @@ -1124,8 +1124,7 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd) v4l2_info(sd, "\tLow pass filter: %s\n", filtr ? "enabled" : "disabled"); if (filtr) - v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, " - "%u ns\n", + v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, %u ns\n", lpf_count_to_us(filtr), lpf_count_to_ns(filtr)); v4l2_info(sd, "\tPulse width timer timed-out: %s\n", diff --git a/drivers/media/i2c/smiapp-pll.c b/drivers/media/i2c/smiapp-pll.c index e3348db56c46..771db56332b2 100644 --- a/drivers/media/i2c/smiapp-pll.c +++ b/drivers/media/i2c/smiapp-pll.c @@ -479,7 +479,8 @@ int smiapp_pll_calculate(struct device *dev, return 0; } - dev_info(dev, "unable to compute pre_pll divisor\n"); + dev_dbg(dev, "unable to compute pre_pll divisor\n"); + return rval; } EXPORT_SYMBOL_GPL(smiapp_pll_calculate); diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index 44f8c7e10a35..59872b31f832 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -26,6 +26,7 @@ #include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/module.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/smiapp.h> @@ -68,10 +69,9 @@ static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor) struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc; unsigned int i; - int rval; + int pixel_count = 0; int line_count = 0; - int embedded_start = -1, embedded_end = -1; - int image_start = 0; + int rval; rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE, &fmt_model_type); @@ -101,12 +101,11 @@ static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor) u32 pixels; char *which; char *what; + u32 reg; if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) { - rval = smiapp_read( - sensor, - SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i), - &desc); + reg = SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i); + rval = smiapp_read(sensor, reg, &desc); if (rval) return rval; @@ -117,10 +116,8 @@ static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor) pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK; } else if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) { - rval = smiapp_read( - sensor, - SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i), - &desc); + reg = SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i); + rval = smiapp_read(sensor, reg, &desc); if (rval) return rval; @@ -159,40 +156,47 @@ static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor) break; default: what = "invalid"; - dev_dbg(&client->dev, "pixelcode %d\n", pixelcode); break; } - dev_dbg(&client->dev, "%s pixels: %d %s\n", - what, pixels, which); - - if (i < ncol_desc) + dev_dbg(&client->dev, + "0x%8.8x %s pixels: %d %s (pixelcode %u)\n", reg, + what, pixels, which, pixelcode); + + if (i < ncol_desc) { + if (pixelcode == + SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE) + sensor->visible_pixel_start = pixel_count; + pixel_count += pixels; continue; + } /* Handle row descriptors */ - if (pixelcode - == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) { - embedded_start = line_count; - } else { - if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE - || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2) - image_start = line_count; - if (embedded_start != -1 && embedded_end == -1) - embedded_end = line_count; + switch (pixelcode) { + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED: + if (sensor->embedded_end) + break; + sensor->embedded_start = line_count; + sensor->embedded_end = line_count + pixels; + break; + case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE: + sensor->image_start = line_count; + break; } line_count += pixels; } - if (embedded_start == -1 || embedded_end == -1) { - embedded_start = 0; - embedded_end = 0; + if (sensor->embedded_end > sensor->image_start) { + dev_dbg(&client->dev, + "adjusting image start line to %u (was %u)\n", + sensor->embedded_end, sensor->image_start); + sensor->image_start = sensor->embedded_end; } - sensor->image_start = image_start; - dev_dbg(&client->dev, "embedded data from lines %d to %d\n", - embedded_start, embedded_end); - dev_dbg(&client->dev, "image data starts at line %d\n", image_start); + sensor->embedded_start, sensor->embedded_end); + dev_dbg(&client->dev, "image data starts at line %d\n", + sensor->image_start); return 0; } @@ -443,8 +447,7 @@ static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl) orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP; orient ^= sensor->hvflip_inv_mask; - rval = smiapp_write(sensor, - SMIAPP_REG_U8_IMAGE_ORIENTATION, + rval = smiapp_write(sensor, SMIAPP_REG_U8_IMAGE_ORIENTATION, orient); if (rval < 0) return rval; @@ -459,10 +462,8 @@ static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl) __smiapp_update_exposure_limits(sensor); if (exposure > sensor->exposure->maximum) { - sensor->exposure->val = - sensor->exposure->maximum; - rval = smiapp_set_ctrl( - sensor->exposure); + sensor->exposure->val = sensor->exposure->maximum; + rval = smiapp_set_ctrl(sensor->exposure); if (rval < 0) return rval; } @@ -621,7 +622,7 @@ static int smiapp_init_controls(struct smiapp_sensor *sensor) static int smiapp_init_late_controls(struct smiapp_sensor *sensor) { unsigned long *valid_link_freqs = &sensor->valid_link_freqs[ - sensor->csi_format->compressed - SMIAPP_COMPRESSED_BASE]; + sensor->csi_format->compressed - sensor->compressed_min_bpp]; unsigned int max, i; for (i = 0; i < ARRAY_SIZE(sensor->test_data); i++) { @@ -754,6 +755,7 @@ static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); struct smiapp_pll *pll = &sensor->pll; + u8 compressed_max_bpp = 0; unsigned int type, n; unsigned int i, pixel_order; int rval; @@ -826,16 +828,27 @@ static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor) pll->scale_m = sensor->scale_m; for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { + sensor->compressed_min_bpp = + min(smiapp_csi_data_formats[i].compressed, + sensor->compressed_min_bpp); + compressed_max_bpp = + max(smiapp_csi_data_formats[i].compressed, + compressed_max_bpp); + } + + sensor->valid_link_freqs = devm_kcalloc( + &client->dev, + compressed_max_bpp - sensor->compressed_min_bpp + 1, + sizeof(*sensor->valid_link_freqs), GFP_KERNEL); + + for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { const struct smiapp_csi_data_format *f = &smiapp_csi_data_formats[i]; unsigned long *valid_link_freqs = &sensor->valid_link_freqs[ - f->compressed - SMIAPP_COMPRESSED_BASE]; + f->compressed - sensor->compressed_min_bpp]; unsigned int j; - BUG_ON(f->compressed < SMIAPP_COMPRESSED_BASE); - BUG_ON(f->compressed > SMIAPP_COMPRESSED_MAX); - if (!(sensor->default_mbus_frame_fmts & 1 << i)) continue; @@ -914,12 +927,6 @@ static int smiapp_update_mode(struct smiapp_sensor *sensor) unsigned int binning_mode; int rval; - dev_dbg(&client->dev, "frame size: %dx%d\n", - sensor->src->crop[SMIAPP_PAD_SRC].width, - sensor->src->crop[SMIAPP_PAD_SRC].height); - dev_dbg(&client->dev, "csi format width: %d\n", - sensor->csi_format->width); - /* Binning has to be set up here; it affects limits */ if (sensor->binning_horizontal == 1 && sensor->binning_vertical == 1) { @@ -1196,9 +1203,17 @@ out: * Power management */ -static int smiapp_power_on(struct smiapp_sensor *sensor) +static int smiapp_power_on(struct device *dev) { - struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + /* + * The sub-device related to the I2C device is always the + * source one, i.e. ssds[0]. + */ + struct smiapp_sensor *sensor = + container_of(ssd, struct smiapp_sensor, ssds[0]); unsigned int sleep; int rval; @@ -1307,8 +1322,7 @@ static int smiapp_power_on(struct smiapp_sensor *sensor) if (!sensor->pixel_array) return 0; - rval = v4l2_ctrl_handler_setup( - &sensor->pixel_array->ctrl_handler); + rval = v4l2_ctrl_handler_setup(&sensor->pixel_array->ctrl_handler); if (rval) goto out_cci_addr_fail; @@ -1325,16 +1339,24 @@ static int smiapp_power_on(struct smiapp_sensor *sensor) return 0; out_cci_addr_fail: + gpiod_set_value(sensor->xshutdown, 0); clk_disable_unprepare(sensor->ext_clk); out_xclk_fail: regulator_disable(sensor->vana); + return rval; } -static void smiapp_power_off(struct smiapp_sensor *sensor) +static int smiapp_power_off(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); + struct smiapp_sensor *sensor = + container_of(ssd, struct smiapp_sensor, ssds[0]); + /* * Currently power/clock to lens are enable/disabled separately * but they are essentially the same signals. So if the sensor is @@ -1352,31 +1374,31 @@ static void smiapp_power_off(struct smiapp_sensor *sensor) usleep_range(5000, 5000); regulator_disable(sensor->vana); sensor->streaming = false; + + return 0; } static int smiapp_set_power(struct v4l2_subdev *subdev, int on) { - struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); - int ret = 0; + int rval; - mutex_lock(&sensor->power_mutex); + if (!on) { + pm_runtime_mark_last_busy(subdev->dev); + pm_runtime_put_autosuspend(subdev->dev); - if (on && !sensor->power_count) { - /* Power on and perform initialisation. */ - ret = smiapp_power_on(sensor); - if (ret < 0) - goto out; - } else if (!on && sensor->power_count == 1) { - smiapp_power_off(sensor); + return 0; } - /* Update the power count. */ - sensor->power_count += on ? 1 : -1; - WARN_ON(sensor->power_count < 0); + rval = pm_runtime_get_sync(subdev->dev); + if (rval >= 0) + return 0; -out: - mutex_unlock(&sensor->power_mutex); - return ret; + if (rval != -EBUSY && rval != -EAGAIN) + pm_runtime_set_active(subdev->dev); + + pm_runtime_put(subdev->dev); + + return rval; } /* ----------------------------------------------------------------------------- @@ -1614,7 +1636,8 @@ static int __smiapp_get_format(struct v4l2_subdev *subdev, struct smiapp_subdev *ssd = to_smiapp_subdev(subdev); if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { - fmt->format = *v4l2_subdev_get_try_format(subdev, cfg, fmt->pad); + fmt->format = *v4l2_subdev_get_try_format(subdev, cfg, + fmt->pad); } else { struct v4l2_rect *r; @@ -1714,7 +1737,6 @@ static void smiapp_propagate(struct v4l2_subdev *subdev, static const struct smiapp_csi_data_format *smiapp_validate_csi_data_format(struct smiapp_sensor *sensor, u32 code) { - const struct smiapp_csi_data_format *csi_format = sensor->csi_format; unsigned int i; for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) { @@ -1723,7 +1745,7 @@ static const struct smiapp_csi_data_format return &smiapp_csi_data_formats[i]; } - return csi_format; + return sensor->csi_format; } static int smiapp_set_format_source(struct v4l2_subdev *subdev, @@ -1769,7 +1791,7 @@ static int smiapp_set_format_source(struct v4l2_subdev *subdev, valid_link_freqs = &sensor->valid_link_freqs[sensor->csi_format->compressed - - SMIAPP_COMPRESSED_BASE]; + - sensor->compressed_min_bpp]; __v4l2_ctrl_modify_range( sensor->link_freq, 0, @@ -2057,8 +2079,7 @@ static int smiapp_set_compose(struct v4l2_subdev *subdev, smiapp_set_compose_scaler(subdev, cfg, sel, crops, comp); *comp = sel->r; - smiapp_propagate(subdev, cfg, sel->which, - V4L2_SEL_TGT_COMPOSE); + smiapp_propagate(subdev, cfg, sel->which, V4L2_SEL_TGT_COMPOSE); if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) return smiapp_update_mode(sensor); @@ -2135,9 +2156,8 @@ static int smiapp_set_crop(struct v4l2_subdev *subdev, ->height; src_size = &_r; } else { - src_size = - v4l2_subdev_get_try_compose( - subdev, cfg, ssd->sink_pad); + src_size = v4l2_subdev_get_try_compose( + subdev, cfg, ssd->sink_pad); } } @@ -2161,6 +2181,15 @@ static int smiapp_set_crop(struct v4l2_subdev *subdev, return 0; } +static void smiapp_get_native_size(struct smiapp_subdev *ssd, + struct v4l2_rect *r) +{ + r->top = 0; + r->left = 0; + r->width = ssd->sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; + r->height = ssd->sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; +} + static int __smiapp_get_selection(struct v4l2_subdev *subdev, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_selection *sel) @@ -2192,17 +2221,12 @@ static int __smiapp_get_selection(struct v4l2_subdev *subdev, switch (sel->target) { case V4L2_SEL_TGT_CROP_BOUNDS: case V4L2_SEL_TGT_NATIVE_SIZE: - if (ssd == sensor->pixel_array) { - sel->r.left = sel->r.top = 0; - sel->r.width = - sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; - sel->r.height = - sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; - } else if (sel->pad == ssd->sink_pad) { + if (ssd == sensor->pixel_array) + smiapp_get_native_size(ssd, &sel->r); + else if (sel->pad == ssd->sink_pad) sel->r = sink_fmt; - } else { + else sel->r = *comp; - } break; case V4L2_SEL_TGT_CROP: case V4L2_SEL_TGT_COMPOSE_BOUNDS: @@ -2303,15 +2327,26 @@ smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr, return -EBUSY; if (!sensor->nvm_size) { + int rval; + /* NVM not read yet - read it now */ sensor->nvm_size = sensor->hwcfg->nvm_size; - if (smiapp_set_power(subdev, 1) < 0) + + rval = pm_runtime_get_sync(&client->dev); + if (rval < 0) { + if (rval != -EBUSY && rval != -EAGAIN) + pm_runtime_set_active(&client->dev); + pm_runtime_put(&client->dev); return -ENODEV; + } + if (smiapp_read_nvm(sensor, sensor->nvm)) { dev_err(&client->dev, "nvm read failed\n"); return -ENODEV; } - smiapp_set_power(subdev, 0); + + pm_runtime_mark_last_busy(&client->dev); + pm_runtime_put_autosuspend(&client->dev); } /* * NVM is still way below a PAGE_SIZE, so we can safely @@ -2475,383 +2510,160 @@ static const struct v4l2_subdev_ops smiapp_ops; static const struct v4l2_subdev_internal_ops smiapp_internal_ops; static const struct media_entity_operations smiapp_entity_ops; -static int smiapp_register_subdevs(struct smiapp_sensor *sensor) +static int smiapp_register_subdev(struct smiapp_sensor *sensor, + struct smiapp_subdev *ssd, + struct smiapp_subdev *sink_ssd, + u16 source_pad, u16 sink_pad, u32 link_flags) { struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); - struct smiapp_subdev *ssds[] = { - sensor->scaler, - sensor->binner, - sensor->pixel_array, - }; - unsigned int i; int rval; - for (i = 0; i < SMIAPP_SUBDEVS - 1; i++) { - struct smiapp_subdev *this = ssds[i + 1]; - struct smiapp_subdev *last = ssds[i]; - - if (!last) - continue; + if (!sink_ssd) + return 0; - rval = media_entity_pads_init(&this->sd.entity, - this->npads, this->pads); - if (rval) { - dev_err(&client->dev, - "media_entity_pads_init failed\n"); - return rval; - } + rval = media_entity_pads_init(&ssd->sd.entity, + ssd->npads, ssd->pads); + if (rval) { + dev_err(&client->dev, + "media_entity_pads_init failed\n"); + return rval; + } - rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev, - &this->sd); - if (rval) { - dev_err(&client->dev, - "v4l2_device_register_subdev failed\n"); - return rval; - } + rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev, + &ssd->sd); + if (rval) { + dev_err(&client->dev, + "v4l2_device_register_subdev failed\n"); + return rval; + } - rval = media_create_pad_link(&this->sd.entity, - this->source_pad, - &last->sd.entity, - last->sink_pad, - MEDIA_LNK_FL_ENABLED | - MEDIA_LNK_FL_IMMUTABLE); - if (rval) { - dev_err(&client->dev, - "media_create_pad_link failed\n"); - return rval; - } + rval = media_create_pad_link(&ssd->sd.entity, source_pad, + &sink_ssd->sd.entity, sink_pad, + link_flags); + if (rval) { + dev_err(&client->dev, + "media_create_pad_link failed\n"); + v4l2_device_unregister_subdev(&ssd->sd); + return rval; } return 0; } -static void smiapp_cleanup(struct smiapp_sensor *sensor) +static void smiapp_unregistered(struct v4l2_subdev *subdev) { - struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); - - device_remove_file(&client->dev, &dev_attr_nvm); - device_remove_file(&client->dev, &dev_attr_ident); + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); + unsigned int i; - smiapp_free_controls(sensor); + for (i = 1; i < sensor->ssds_used; i++) + v4l2_device_unregister_subdev(&sensor->ssds[i].sd); } -static int smiapp_init(struct smiapp_sensor *sensor) +static int smiapp_registered(struct v4l2_subdev *subdev) { - struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); - struct smiapp_pll *pll = &sensor->pll; - struct smiapp_subdev *last = NULL; - unsigned int i; + struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); int rval; - sensor->vana = devm_regulator_get(&client->dev, "vana"); - if (IS_ERR(sensor->vana)) { - dev_err(&client->dev, "could not get regulator for vana\n"); - return PTR_ERR(sensor->vana); - } - - sensor->ext_clk = devm_clk_get(&client->dev, NULL); - if (IS_ERR(sensor->ext_clk)) { - dev_err(&client->dev, "could not get clock (%ld)\n", - PTR_ERR(sensor->ext_clk)); - return -EPROBE_DEFER; - } - - rval = clk_set_rate(sensor->ext_clk, - sensor->hwcfg->ext_clk); - if (rval < 0) { - dev_err(&client->dev, - "unable to set clock freq to %u\n", - sensor->hwcfg->ext_clk); - return rval; + if (sensor->scaler) { + rval = smiapp_register_subdev( + sensor, sensor->binner, sensor->scaler, + SMIAPP_PAD_SRC, SMIAPP_PAD_SINK, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (rval < 0) + return rval; } - sensor->xshutdown = devm_gpiod_get_optional(&client->dev, "xshutdown", - GPIOD_OUT_LOW); - if (IS_ERR(sensor->xshutdown)) - return PTR_ERR(sensor->xshutdown); - - rval = smiapp_power_on(sensor); + rval = smiapp_register_subdev( + sensor, sensor->pixel_array, sensor->binner, + SMIAPP_PA_PAD_SRC, SMIAPP_PAD_SINK, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (rval) - return -ENODEV; - - rval = smiapp_identify_module(sensor); - if (rval) { - rval = -ENODEV; - goto out_power_off; - } - - rval = smiapp_get_all_limits(sensor); - if (rval) { - rval = -ENODEV; - goto out_power_off; - } - - /* - * Handle Sensor Module orientation on the board. - * - * The application of H-FLIP and V-FLIP on the sensor is modified by - * the sensor orientation on the board. - * - * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set - * both H-FLIP and V-FLIP for normal operation which also implies - * that a set/unset operation for user space HFLIP and VFLIP v4l2 - * controls will need to be internally inverted. - * - * Rotation also changes the bayer pattern. - */ - if (sensor->hwcfg->module_board_orient == - SMIAPP_MODULE_BOARD_ORIENT_180) - sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP | - SMIAPP_IMAGE_ORIENTATION_VFLIP; - - rval = smiapp_call_quirk(sensor, limits); - if (rval) { - dev_err(&client->dev, "limits quirks failed\n"); - goto out_power_off; - } - - if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) { - u32 val; - - rval = smiapp_read(sensor, - SMIAPP_REG_U8_BINNING_SUBTYPES, &val); - if (rval < 0) { - rval = -ENODEV; - goto out_power_off; - } - sensor->nbinning_subtypes = min_t(u8, val, - SMIAPP_BINNING_SUBTYPES); - - for (i = 0; i < sensor->nbinning_subtypes; i++) { - rval = smiapp_read( - sensor, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val); - if (rval < 0) { - rval = -ENODEV; - goto out_power_off; - } - sensor->binning_subtypes[i] = - *(struct smiapp_binning_subtype *)&val; + goto out_err; - dev_dbg(&client->dev, "binning %xx%x\n", - sensor->binning_subtypes[i].horizontal, - sensor->binning_subtypes[i].vertical); - } - } - sensor->binning_horizontal = 1; - sensor->binning_vertical = 1; + return 0; - if (device_create_file(&client->dev, &dev_attr_ident) != 0) { - dev_err(&client->dev, "sysfs ident entry creation failed\n"); - rval = -ENOENT; - goto out_power_off; - } - /* SMIA++ NVM initialization - it will be read from the sensor - * when it is first requested by userspace. - */ - if (sensor->minfo.smiapp_version && sensor->hwcfg->nvm_size) { - sensor->nvm = devm_kzalloc(&client->dev, - sensor->hwcfg->nvm_size, GFP_KERNEL); - if (sensor->nvm == NULL) { - dev_err(&client->dev, "nvm buf allocation failed\n"); - rval = -ENOMEM; - goto out_cleanup; - } +out_err: + smiapp_unregistered(subdev); - if (device_create_file(&client->dev, &dev_attr_nvm) != 0) { - dev_err(&client->dev, "sysfs nvm entry failed\n"); - rval = -EBUSY; - goto out_cleanup; - } - } + return rval; +} - /* We consider this as profile 0 sensor if any of these are zero. */ - if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] || - !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] || - !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] || - !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) { - sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0; - } else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] - != SMIAPP_SCALING_CAPABILITY_NONE) { - if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] - == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) - sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1; - else - sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2; - sensor->scaler = &sensor->ssds[sensor->ssds_used]; - sensor->ssds_used++; - } else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] - == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { - sensor->scaler = &sensor->ssds[sensor->ssds_used]; - sensor->ssds_used++; - } - sensor->binner = &sensor->ssds[sensor->ssds_used]; - sensor->ssds_used++; - sensor->pixel_array = &sensor->ssds[sensor->ssds_used]; - sensor->ssds_used++; +static void smiapp_cleanup(struct smiapp_sensor *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); - sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + device_remove_file(&client->dev, &dev_attr_nvm); + device_remove_file(&client->dev, &dev_attr_ident); - /* prepare PLL configuration input values */ - pll->bus_type = SMIAPP_PLL_BUS_TYPE_CSI2; - pll->csi2.lanes = sensor->hwcfg->lanes; - pll->ext_clk_freq_hz = sensor->hwcfg->ext_clk; - pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; - /* Profile 0 sensors have no separate OP clock branch. */ - if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) - pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS; - - for (i = 0; i < SMIAPP_SUBDEVS; i++) { - struct { - struct smiapp_subdev *ssd; - char *name; - } const __this[] = { - { sensor->scaler, "scaler", }, - { sensor->binner, "binner", }, - { sensor->pixel_array, "pixel array", }, - }, *_this = &__this[i]; - struct smiapp_subdev *this = _this->ssd; - - if (!this) - continue; + smiapp_free_controls(sensor); +} - if (this != sensor->src) - v4l2_subdev_init(&this->sd, &smiapp_ops); +static void smiapp_create_subdev(struct smiapp_sensor *sensor, + struct smiapp_subdev *ssd, const char *name, + unsigned short num_pads) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd); - this->sensor = sensor; + if (!ssd) + return; - if (this == sensor->pixel_array) { - this->npads = 1; - } else { - this->npads = 2; - this->source_pad = 1; - } + if (ssd != sensor->src) + v4l2_subdev_init(&ssd->sd, &smiapp_ops); - snprintf(this->sd.name, - sizeof(this->sd.name), "%s %s %d-%4.4x", - sensor->minfo.name, _this->name, - i2c_adapter_id(client->adapter), client->addr); - - this->sink_fmt.width = - sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; - this->sink_fmt.height = - sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; - this->compose.width = this->sink_fmt.width; - this->compose.height = this->sink_fmt.height; - this->crop[this->source_pad] = this->compose; - this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE; - if (this != sensor->pixel_array) { - this->crop[this->sink_pad] = this->compose; - this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK; - } + ssd->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + ssd->sensor = sensor; - this->sd.entity.ops = &smiapp_entity_ops; + ssd->npads = num_pads; + ssd->source_pad = num_pads - 1; - if (last == NULL) { - last = this; - continue; - } + snprintf(ssd->sd.name, + sizeof(ssd->sd.name), "%s %s %d-%4.4x", sensor->minfo.name, + name, i2c_adapter_id(client->adapter), client->addr); - this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; - this->sd.internal_ops = &smiapp_internal_ops; - this->sd.owner = THIS_MODULE; - v4l2_set_subdevdata(&this->sd, client); + smiapp_get_native_size(ssd, &ssd->sink_fmt); - last = this; + ssd->compose.width = ssd->sink_fmt.width; + ssd->compose.height = ssd->sink_fmt.height; + ssd->crop[ssd->source_pad] = ssd->compose; + ssd->pads[ssd->source_pad].flags = MEDIA_PAD_FL_SOURCE; + if (ssd != sensor->pixel_array) { + ssd->crop[ssd->sink_pad] = ssd->compose; + ssd->pads[ssd->sink_pad].flags = MEDIA_PAD_FL_SINK; } - dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile); + ssd->sd.entity.ops = &smiapp_entity_ops; - sensor->pixel_array->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; - - /* final steps */ - smiapp_read_frame_fmt(sensor); - rval = smiapp_init_controls(sensor); - if (rval < 0) - goto out_cleanup; - - rval = smiapp_call_quirk(sensor, init); - if (rval) - goto out_cleanup; + if (ssd == sensor->src) + return; - rval = smiapp_get_mbus_formats(sensor); - if (rval) { - rval = -ENODEV; - goto out_cleanup; - } - - rval = smiapp_init_late_controls(sensor); - if (rval) { - rval = -ENODEV; - goto out_cleanup; - } - - mutex_lock(&sensor->mutex); - rval = smiapp_update_mode(sensor); - mutex_unlock(&sensor->mutex); - if (rval) { - dev_err(&client->dev, "update mode failed\n"); - goto out_cleanup; - } - - sensor->streaming = false; - sensor->dev_init_done = true; - - smiapp_power_off(sensor); - - return 0; - -out_cleanup: - smiapp_cleanup(sensor); - -out_power_off: - smiapp_power_off(sensor); - return rval; -} - -static int smiapp_registered(struct v4l2_subdev *subdev) -{ - struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); - struct i2c_client *client = v4l2_get_subdevdata(subdev); - int rval; - - if (!client->dev.of_node) { - rval = smiapp_init(sensor); - if (rval) - return rval; - } - - rval = smiapp_register_subdevs(sensor); - if (rval) - smiapp_cleanup(sensor); - - return rval; + ssd->sd.internal_ops = &smiapp_internal_ops; + ssd->sd.owner = THIS_MODULE; + ssd->sd.dev = &client->dev; + v4l2_set_subdevdata(&ssd->sd, client); } static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) { struct smiapp_subdev *ssd = to_smiapp_subdev(sd); struct smiapp_sensor *sensor = ssd->sensor; - u32 mbus_code = - smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code; unsigned int i; + int rval; mutex_lock(&sensor->mutex); for (i = 0; i < ssd->npads; i++) { struct v4l2_mbus_framefmt *try_fmt = v4l2_subdev_get_try_format(sd, fh->pad, i); - struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(sd, fh->pad, i); + struct v4l2_rect *try_crop = + v4l2_subdev_get_try_crop(sd, fh->pad, i); struct v4l2_rect *try_comp; - try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1; - try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1; - try_fmt->code = mbus_code; - try_fmt->field = V4L2_FIELD_NONE; + smiapp_get_native_size(ssd, try_crop); - try_crop->top = 0; - try_crop->left = 0; - try_crop->width = try_fmt->width; - try_crop->height = try_fmt->height; + try_fmt->width = try_crop->width; + try_fmt->height = try_crop->height; + try_fmt->code = sensor->internal_csi_format->code; + try_fmt->field = V4L2_FIELD_NONE; if (ssd != sensor->pixel_array) continue; @@ -2862,12 +2674,23 @@ static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) mutex_unlock(&sensor->mutex); - return smiapp_set_power(sd, 1); + rval = pm_runtime_get_sync(sd->dev); + if (rval >= 0) + return 0; + + if (rval != -EBUSY && rval != -EAGAIN) + pm_runtime_set_active(sd->dev); + pm_runtime_put(sd->dev); + + return rval; } static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) { - return smiapp_set_power(sd, 0); + pm_runtime_mark_last_busy(sd->dev); + pm_runtime_put_autosuspend(sd->dev); + + return 0; } static const struct v4l2_subdev_video_ops smiapp_video_ops = { @@ -2904,6 +2727,7 @@ static const struct media_entity_operations smiapp_entity_ops = { static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = { .registered = smiapp_registered, + .unregistered = smiapp_unregistered, .open = smiapp_open, .close = smiapp_close, }; @@ -2924,20 +2748,20 @@ static int smiapp_suspend(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); - bool streaming; - - BUG_ON(mutex_is_locked(&sensor->mutex)); + bool streaming = sensor->streaming; + int rval; - if (sensor->power_count == 0) - return 0; + rval = pm_runtime_get_sync(dev); + if (rval < 0) { + if (rval != -EBUSY && rval != -EAGAIN) + pm_runtime_set_active(&client->dev); + pm_runtime_put(dev); + return -EAGAIN; + } if (sensor->streaming) smiapp_stop_streaming(sensor); - streaming = sensor->streaming; - - smiapp_power_off(sensor); - /* save state for resume */ sensor->streaming = streaming; @@ -2949,14 +2773,9 @@ static int smiapp_resume(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *subdev = i2c_get_clientdata(client); struct smiapp_sensor *sensor = to_smiapp_sensor(subdev); - int rval; - - if (sensor->power_count == 0) - return 0; + int rval = 0; - rval = smiapp_power_on(sensor); - if (rval) - return rval; + pm_runtime_put(dev); if (sensor->streaming) rval = smiapp_start_streaming(sensor); @@ -3051,6 +2870,7 @@ static int smiapp_probe(struct i2c_client *client, { struct smiapp_sensor *sensor; struct smiapp_hwconfig *hwcfg = smiapp_get_hwconfig(&client->dev); + unsigned int i; int rval; if (hwcfg == NULL) @@ -3062,35 +2882,240 @@ static int smiapp_probe(struct i2c_client *client, sensor->hwcfg = hwcfg; mutex_init(&sensor->mutex); - mutex_init(&sensor->power_mutex); sensor->src = &sensor->ssds[sensor->ssds_used]; v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops); sensor->src->sd.internal_ops = &smiapp_internal_src_ops; - sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; - sensor->src->sensor = sensor; - sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE; - rval = media_entity_pads_init(&sensor->src->sd.entity, 2, - sensor->src->pads); - if (rval < 0) + sensor->vana = devm_regulator_get(&client->dev, "vana"); + if (IS_ERR(sensor->vana)) { + dev_err(&client->dev, "could not get regulator for vana\n"); + return PTR_ERR(sensor->vana); + } + + sensor->ext_clk = devm_clk_get(&client->dev, NULL); + if (IS_ERR(sensor->ext_clk)) { + dev_err(&client->dev, "could not get clock (%ld)\n", + PTR_ERR(sensor->ext_clk)); + return -EPROBE_DEFER; + } + + rval = clk_set_rate(sensor->ext_clk, sensor->hwcfg->ext_clk); + if (rval < 0) { + dev_err(&client->dev, + "unable to set clock freq to %u\n", + sensor->hwcfg->ext_clk); return rval; + } - if (client->dev.of_node) { - rval = smiapp_init(sensor); - if (rval) - goto out_media_entity_cleanup; + sensor->xshutdown = devm_gpiod_get_optional(&client->dev, "xshutdown", + GPIOD_OUT_LOW); + if (IS_ERR(sensor->xshutdown)) + return PTR_ERR(sensor->xshutdown); + + pm_runtime_enable(&client->dev); + + rval = pm_runtime_get_sync(&client->dev); + if (rval < 0) { + rval = -ENODEV; + goto out_power_off; + } + + rval = smiapp_identify_module(sensor); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + rval = smiapp_get_all_limits(sensor); + if (rval) { + rval = -ENODEV; + goto out_power_off; } + rval = smiapp_read_frame_fmt(sensor); + if (rval) { + rval = -ENODEV; + goto out_power_off; + } + + /* + * Handle Sensor Module orientation on the board. + * + * The application of H-FLIP and V-FLIP on the sensor is modified by + * the sensor orientation on the board. + * + * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set + * both H-FLIP and V-FLIP for normal operation which also implies + * that a set/unset operation for user space HFLIP and VFLIP v4l2 + * controls will need to be internally inverted. + * + * Rotation also changes the bayer pattern. + */ + if (sensor->hwcfg->module_board_orient == + SMIAPP_MODULE_BOARD_ORIENT_180) + sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP | + SMIAPP_IMAGE_ORIENTATION_VFLIP; + + rval = smiapp_call_quirk(sensor, limits); + if (rval) { + dev_err(&client->dev, "limits quirks failed\n"); + goto out_power_off; + } + + if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) { + u32 val; + + rval = smiapp_read(sensor, + SMIAPP_REG_U8_BINNING_SUBTYPES, &val); + if (rval < 0) { + rval = -ENODEV; + goto out_power_off; + } + sensor->nbinning_subtypes = min_t(u8, val, + SMIAPP_BINNING_SUBTYPES); + + for (i = 0; i < sensor->nbinning_subtypes; i++) { + rval = smiapp_read( + sensor, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val); + if (rval < 0) { + rval = -ENODEV; + goto out_power_off; + } + sensor->binning_subtypes[i] = + *(struct smiapp_binning_subtype *)&val; + + dev_dbg(&client->dev, "binning %xx%x\n", + sensor->binning_subtypes[i].horizontal, + sensor->binning_subtypes[i].vertical); + } + } + sensor->binning_horizontal = 1; + sensor->binning_vertical = 1; + + if (device_create_file(&client->dev, &dev_attr_ident) != 0) { + dev_err(&client->dev, "sysfs ident entry creation failed\n"); + rval = -ENOENT; + goto out_power_off; + } + /* SMIA++ NVM initialization - it will be read from the sensor + * when it is first requested by userspace. + */ + if (sensor->minfo.smiapp_version && sensor->hwcfg->nvm_size) { + sensor->nvm = devm_kzalloc(&client->dev, + sensor->hwcfg->nvm_size, GFP_KERNEL); + if (sensor->nvm == NULL) { + rval = -ENOMEM; + goto out_cleanup; + } + + if (device_create_file(&client->dev, &dev_attr_nvm) != 0) { + dev_err(&client->dev, "sysfs nvm entry failed\n"); + rval = -EBUSY; + goto out_cleanup; + } + } + + /* We consider this as profile 0 sensor if any of these are zero. */ + if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] || + !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) { + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0; + } else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + != SMIAPP_SCALING_CAPABILITY_NONE) { + if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY] + == SMIAPP_SCALING_CAPABILITY_HORIZONTAL) + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1; + else + sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2; + sensor->scaler = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + } else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY] + == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) { + sensor->scaler = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + } + sensor->binner = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + sensor->pixel_array = &sensor->ssds[sensor->ssds_used]; + sensor->ssds_used++; + + sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + + /* prepare PLL configuration input values */ + sensor->pll.bus_type = SMIAPP_PLL_BUS_TYPE_CSI2; + sensor->pll.csi2.lanes = sensor->hwcfg->lanes; + sensor->pll.ext_clk_freq_hz = sensor->hwcfg->ext_clk; + sensor->pll.scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]; + /* Profile 0 sensors have no separate OP clock branch. */ + if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) + sensor->pll.flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS; + + smiapp_create_subdev(sensor, sensor->scaler, "scaler", 2); + smiapp_create_subdev(sensor, sensor->binner, "binner", 2); + smiapp_create_subdev(sensor, sensor->pixel_array, "pixel_array", 1); + + dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile); + + sensor->pixel_array->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + + rval = smiapp_init_controls(sensor); + if (rval < 0) + goto out_cleanup; + + rval = smiapp_call_quirk(sensor, init); + if (rval) + goto out_cleanup; + + rval = smiapp_get_mbus_formats(sensor); + if (rval) { + rval = -ENODEV; + goto out_cleanup; + } + + rval = smiapp_init_late_controls(sensor); + if (rval) { + rval = -ENODEV; + goto out_cleanup; + } + + mutex_lock(&sensor->mutex); + rval = smiapp_update_mode(sensor); + mutex_unlock(&sensor->mutex); + if (rval) { + dev_err(&client->dev, "update mode failed\n"); + goto out_cleanup; + } + + sensor->streaming = false; + sensor->dev_init_done = true; + + rval = media_entity_pads_init(&sensor->src->sd.entity, 2, + sensor->src->pads); + if (rval < 0) + goto out_media_entity_cleanup; + rval = v4l2_async_register_subdev(&sensor->src->sd); if (rval < 0) goto out_media_entity_cleanup; + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put_autosuspend(&client->dev); + return 0; out_media_entity_cleanup: media_entity_cleanup(&sensor->src->sd.entity); +out_cleanup: + smiapp_cleanup(sensor); + +out_power_off: + pm_runtime_put(&client->dev); + pm_runtime_disable(&client->dev); + return rval; } @@ -3102,11 +3127,8 @@ static int smiapp_remove(struct i2c_client *client) v4l2_async_unregister_subdev(subdev); - if (sensor->power_count) { - gpiod_set_value(sensor->xshutdown, 0); - clk_disable_unprepare(sensor->ext_clk); - sensor->power_count = 0; - } + pm_runtime_suspend(&client->dev); + pm_runtime_disable(&client->dev); for (i = 0; i < sensor->ssds_used; i++) { v4l2_device_unregister_subdev(&sensor->ssds[i].sd); @@ -3130,8 +3152,8 @@ static const struct i2c_device_id smiapp_id_table[] = { MODULE_DEVICE_TABLE(i2c, smiapp_id_table); static const struct dev_pm_ops smiapp_pm_ops = { - .suspend = smiapp_suspend, - .resume = smiapp_resume, + SET_SYSTEM_SLEEP_PM_OPS(smiapp_suspend, smiapp_resume) + SET_RUNTIME_PM_OPS(smiapp_power_off, smiapp_power_on, NULL) }; static struct i2c_driver smiapp_i2c_driver = { diff --git a/drivers/media/i2c/smiapp/smiapp-regs.c b/drivers/media/i2c/smiapp/smiapp-regs.c index 1e501c06d18c..d6779e35d36f 100644 --- a/drivers/media/i2c/smiapp/smiapp-regs.c +++ b/drivers/media/i2c/smiapp/smiapp-regs.c @@ -268,8 +268,8 @@ int smiapp_write_no_quirk(struct smiapp_sensor *sensor, u32 reg, u32 val) if (r == 1) { if (retries) dev_err(&client->dev, - "sensor i2c stall encountered. " - "retries: %d\n", retries); + "sensor i2c stall encountered. retries: %d\n", + retries); return 0; } diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h index aae72bc87bf7..f74d695018b9 100644 --- a/drivers/media/i2c/smiapp/smiapp.h +++ b/drivers/media/i2c/smiapp/smiapp.h @@ -150,11 +150,6 @@ struct smiapp_csi_data_format { #define SMIAPP_PAD_SRC 1 #define SMIAPP_PADS 2 -#define SMIAPP_COMPRESSED_BASE 8 -#define SMIAPP_COMPRESSED_MAX 16 -#define SMIAPP_NR_OF_COMPRESSED (SMIAPP_COMPRESSED_MAX - \ - SMIAPP_COMPRESSED_BASE + 1) - struct smiapp_binning_subtype { u8 horizontal:4; u8 vertical:4; @@ -162,9 +157,9 @@ struct smiapp_binning_subtype { struct smiapp_subdev { struct v4l2_subdev sd; - struct media_pad pads[2]; + struct media_pad pads[SMIAPP_PADS]; struct v4l2_rect sink_fmt; - struct v4l2_rect crop[2]; + struct v4l2_rect crop[SMIAPP_PADS]; struct v4l2_rect compose; /* compose on sink */ unsigned short sink_pad; unsigned short source_pad; @@ -181,16 +176,9 @@ struct smiapp_sensor { * "mutex" is used to serialise access to all fields here * except v4l2_ctrls at the end of the struct. "mutex" is also * used to serialise access to file handle specific - * information. The exception to this rule is the power_mutex - * below. + * information. */ struct mutex mutex; - /* - * power_mutex is used to serialise power management related - * activities. Acquiring "mutex" at that time isn't necessary - * since there are no other users anyway. - */ - struct mutex power_mutex; struct smiapp_subdev ssds[SMIAPP_SUBDEVS]; u32 ssds_used; struct smiapp_subdev *src; @@ -218,12 +206,14 @@ struct smiapp_sensor { u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */ u8 frame_skip; - u16 image_start; /* Offset to first line after metadata lines */ - - int power_count; + u16 embedded_start; /* embedded data start line */ + u16 embedded_end; + u16 image_start; /* image data start line */ + u16 visible_pixel_start; /* start pixel of the visible image */ bool streaming; bool dev_init_done; + u8 compressed_min_bpp; u8 *nvm; /* nvm memory buffer */ unsigned int nvm_size; /* bytes */ @@ -233,7 +223,7 @@ struct smiapp_sensor { struct smiapp_pll pll; /* Is a default format supported for a given BPP? */ - unsigned long valid_link_freqs[SMIAPP_NR_OF_COMPRESSED]; + unsigned long *valid_link_freqs; /* Pixel array controls */ struct v4l2_ctrl *analog_gain; diff --git a/drivers/media/i2c/soc_camera/ov772x.c b/drivers/media/i2c/soc_camera/ov772x.c index 7e68762b3a4b..985a3672b243 100644 --- a/drivers/media/i2c/soc_camera/ov772x.c +++ b/drivers/media/i2c/soc_camera/ov772x.c @@ -1064,8 +1064,7 @@ static int ov772x_probe(struct i2c_client *client, if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { dev_err(&adapter->dev, - "I2C-Adapter doesn't support " - "I2C_FUNC_SMBUS_BYTE_DATA\n"); + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n"); return -EIO; } diff --git a/drivers/media/i2c/soc_camera/ov9740.c b/drivers/media/i2c/soc_camera/ov9740.c index 0da632d7d33a..f11f76cdacad 100644 --- a/drivers/media/i2c/soc_camera/ov9740.c +++ b/drivers/media/i2c/soc_camera/ov9740.c @@ -881,8 +881,7 @@ static int ov9740_video_probe(struct i2c_client *client) goto done; } - dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, " - "Manufacturer 0x%02x, SMIA Version 0x%02x\n", + dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, Manufacturer 0x%02x, SMIA Version 0x%02x\n", priv->model, priv->revision, priv->manid, priv->smiaver); ret = v4l2_ctrl_handler_setup(&priv->hdl); diff --git a/drivers/media/i2c/soc_camera/tw9910.c b/drivers/media/i2c/soc_camera/tw9910.c index 4002c07f3857..c9c49ed707b8 100644 --- a/drivers/media/i2c/soc_camera/tw9910.c +++ b/drivers/media/i2c/soc_camera/tw9910.c @@ -947,8 +947,7 @@ static int tw9910_probe(struct i2c_client *client, if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { dev_err(&client->dev, - "I2C-Adapter doesn't support " - "I2C_FUNC_SMBUS_BYTE_DATA\n"); + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n"); return -EIO; } diff --git a/drivers/media/i2c/tvaudio.c b/drivers/media/i2c/tvaudio.c index 42d1e26e581c..ce86534450ac 100644 --- a/drivers/media/i2c/tvaudio.c +++ b/drivers/media/i2c/tvaudio.c @@ -1894,8 +1894,9 @@ static int tvaudio_probe(struct i2c_client *client, const struct i2c_device_id * printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n"); printk(KERN_INFO "tvaudio: known chips: "); for (desc = chiplist; desc->name != NULL; desc++) - printk("%s%s", (desc == chiplist) ? "" : ", ", desc->name); - printk("\n"); + printk(KERN_CONT "%s%s", + (desc == chiplist) ? "" : ", ", desc->name); + printk(KERN_CONT "\n"); } chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c index d5c9347f4c6d..0c62899c3667 100644 --- a/drivers/media/i2c/tvp514x.c +++ b/drivers/media/i2c/tvp514x.c @@ -894,7 +894,7 @@ static int tvp514x_enum_mbus_code(struct v4l2_subdev *sd, if (index != 0) return -EINVAL; - code->code = MEDIA_BUS_FMT_YUYV8_2X8; + code->code = MEDIA_BUS_FMT_UYVY8_2X8; return 0; } @@ -922,7 +922,7 @@ static int tvp514x_get_pad_format(struct v4l2_subdev *sd, return 0; } - format->format.code = MEDIA_BUS_FMT_YUYV8_2X8; + format->format.code = MEDIA_BUS_FMT_UYVY8_2X8; format->format.width = tvp514x_std_list[decoder->current_std].width; format->format.height = tvp514x_std_list[decoder->current_std].height; format->format.colorspace = V4L2_COLORSPACE_SMPTE170M; @@ -946,7 +946,7 @@ static int tvp514x_set_pad_format(struct v4l2_subdev *sd, struct tvp514x_decoder *decoder = to_decoder(sd); if (fmt->format.field != V4L2_FIELD_INTERLACED || - fmt->format.code != MEDIA_BUS_FMT_YUYV8_2X8 || + fmt->format.code != MEDIA_BUS_FMT_UYVY8_2X8 || fmt->format.colorspace != V4L2_COLORSPACE_SMPTE170M || fmt->format.width != tvp514x_std_list[decoder->current_std].width || fmt->format.height != tvp514x_std_list[decoder->current_std].height) diff --git a/drivers/media/pci/b2c2/flexcop-dma.c b/drivers/media/pci/b2c2/flexcop-dma.c index 2881e0d956ad..913dc97f8b49 100644 --- a/drivers/media/pci/b2c2/flexcop-dma.c +++ b/drivers/media/pci/b2c2/flexcop-dma.c @@ -57,8 +57,7 @@ int flexcop_dma_config(struct flexcop_device *fc, fc->write_ibi_reg(fc,dma2_014,v0x4); fc->write_ibi_reg(fc,dma2_01c,v0xc); } else { - err("either DMA1 or DMA2 can be configured within one " - "flexcop_dma_config call."); + err("either DMA1 or DMA2 can be configured within one flexcop_dma_config call."); return -EINVAL; } @@ -82,8 +81,7 @@ int flexcop_dma_xfer_control(struct flexcop_device *fc, r0x0 = dma2_010; r0xc = dma2_01c; } else { - err("either transfer DMA1 or DMA2 can be started within one " - "flexcop_dma_xfer_control call."); + err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call."); return -EINVAL; } diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c index 4cac1fc233f2..99ce28442a75 100644 --- a/drivers/media/pci/b2c2/flexcop-pci.c +++ b/drivers/media/pci/b2c2/flexcop-pci.c @@ -185,8 +185,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id) fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2; u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0; - deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, " - "last_cur_pos: %08x ", + deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ", jiffies_to_usecs(jiffies - fc_pci->last_irq), v.raw, (unsigned long long)cur_addr, cur_pos, fc_pci->last_dma1_cur_pos); @@ -220,8 +219,8 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id) fc_pci->last_dma1_cur_pos = cur_pos; fc_pci->count++; } else { - deb_irq("isr for flexcop called, " - "apparently without reason (%08x)\n", v.raw); + deb_irq("isr for flexcop called, apparently without reason (%08x)\n", + v.raw); ret = IRQ_NONE; } diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c index 8a17cc0bfa07..a1b0f3193bc0 100644 --- a/drivers/media/pci/bt8xx/bttv-cards.c +++ b/drivers/media/pci/bt8xx/bttv-cards.c @@ -125,10 +125,8 @@ module_param_array(remote, int, NULL, 0444); module_param_array(audiodev, int, NULL, 0444); module_param_array(audiomux, int, NULL, 0444); -MODULE_PARM_DESC(triton1,"set ETBF pci config bit " - "[enable bug compatibility for triton1 + others]"); -MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " - "[yet another chipset flaw workaround]"); +MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]"); +MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]"); MODULE_PARM_DESC(latency,"pci latency timer"); MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)"); @@ -141,8 +139,7 @@ MODULE_PARM_DESC(audiodev, "specify audio device:\n" "\t\t 2 = tda7432\n" "\t\t 3 = tvaudio"); MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); -MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" - " [some VIA/SIS chipsets are known to have problem with overlay]"); +MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]"); /* ----------------------------------------------------------------------- */ /* list of card IDs for bt878+ cards */ diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c index 97b91a9f9fa9..fb4aefbcc8f8 100644 --- a/drivers/media/pci/bt8xx/bttv-driver.c +++ b/drivers/media/pci/bt8xx/bttv-driver.c @@ -148,8 +148,7 @@ MODULE_PARM_DESC(irq_debug, "irq handler debug messages, default is 0 (no)"); MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); MODULE_PARM_DESC(gbuffers, "number of capture buffers. range 2-32, default 8"); MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 0x208000"); -MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default " - "is 1 (yes) for compatibility with older applications"); +MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default is 1 (yes) for compatibility with older applications"); MODULE_PARM_DESC(automute, "mute audio on bad/missing video signal, default is 1 (yes)"); MODULE_PARM_DESC(chroma_agc, "enables the AGC of chroma signal, default is 0 (no)"); MODULE_PARM_DESC(agc_crush, "enables the luminance AGC crush, default is 1 (yes)"); @@ -3506,8 +3505,7 @@ static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc) (unsigned long)rc); if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) { - pr_notice("%d: Oh, there (temporarily?) is no input signal. " - "Ok, then this is harmless, don't worry ;)\n", + pr_notice("%d: Oh, there (temporarily?) is no input signal. Ok, then this is harmless, don't worry ;)\n", btv->c.nr); return; } diff --git a/drivers/media/pci/bt8xx/bttv-i2c.c b/drivers/media/pci/bt8xx/bttv-i2c.c index d43911deb617..274fd036b306 100644 --- a/drivers/media/pci/bt8xx/bttv-i2c.c +++ b/drivers/media/pci/bt8xx/bttv-i2c.c @@ -44,15 +44,13 @@ static int i2c_scan; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug, "configure i2c debug level"); module_param(i2c_hw, int, 0444); -MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, " - "instead of software bitbang"); +MODULE_PARM_DESC(i2c_hw, "force use of hardware i2c support, instead of software bitbang"); module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); static unsigned int i2c_udelay = 5; module_param(i2c_udelay, int, 0444); -MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs " - "(should be 5 or higher). Lower value means higher bus speed."); +MODULE_PARM_DESC(i2c_udelay, "soft i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed."); /* ----------------------------------------------------------------------- */ /* I2C functions - bitbanging adapter (software i2c) */ diff --git a/drivers/media/pci/bt8xx/bttv-input.c b/drivers/media/pci/bt8xx/bttv-input.c index a75c53da224a..4da720e4867e 100644 --- a/drivers/media/pci/bt8xx/bttv-input.c +++ b/drivers/media/pci/bt8xx/bttv-input.c @@ -185,8 +185,8 @@ static u32 bttv_rc5_decode(unsigned int code) return 0; } } - dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, " - "instr=%x\n", rc5, org_code, RC5_START(rc5), + dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, instr=%x\n", + rc5, org_code, RC5_START(rc5), RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5)); return rc5; } diff --git a/drivers/media/pci/cobalt/cobalt-v4l2.c b/drivers/media/pci/cobalt/cobalt-v4l2.c index 5c76637900d0..def4a3b37084 100644 --- a/drivers/media/pci/cobalt/cobalt-v4l2.c +++ b/drivers/media/pci/cobalt/cobalt-v4l2.c @@ -527,7 +527,7 @@ static void cobalt_video_input_status_show(struct cobalt_stream *s) cvi_ctrl = ioread32(&cvi->control); cvi_stat = ioread32(&cvi->status); vmr_ctrl = ioread32(&vmr->control); - vmr_stat = ioread32(&vmr->control); + vmr_stat = ioread32(&vmr->status); cobalt_info("rx%d: cvi resolution: %dx%d\n", rx, ioread32(&cvi->frame_width), ioread32(&cvi->frame_height)); cobalt_info("rx%d: cvi control: %s%s%s\n", rx, @@ -1084,12 +1084,33 @@ static int cobalt_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) return 0; } +static int cobalt_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cc) +{ + struct cobalt_stream *s = video_drvdata(file); + struct v4l2_dv_timings timings; + int err = 0; + + if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (s->input == 1) + timings = cea1080p60; + else + err = v4l2_subdev_call(s->sd, video, g_dv_timings, &timings); + if (!err) { + cc->bounds.width = cc->defrect.width = timings.bt.width; + cc->bounds.height = cc->defrect.height = timings.bt.height; + cc->pixelaspect = v4l2_dv_timings_aspect_ratio(&timings); + } + return err; +} + static const struct v4l2_ioctl_ops cobalt_ioctl_ops = { .vidioc_querycap = cobalt_querycap, .vidioc_g_parm = cobalt_g_parm, .vidioc_log_status = cobalt_log_status, .vidioc_streamon = vb2_ioctl_streamon, .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_cropcap = cobalt_cropcap, .vidioc_enum_input = cobalt_enum_input, .vidioc_g_input = cobalt_g_input, .vidioc_s_input = cobalt_s_input, diff --git a/drivers/media/pci/cx18/cx18-alsa-main.c b/drivers/media/pci/cx18/cx18-alsa-main.c index 0b0e8015ad34..9fb7f5978c8b 100644 --- a/drivers/media/pci/cx18/cx18-alsa-main.c +++ b/drivers/media/pci/cx18/cx18-alsa-main.c @@ -217,8 +217,8 @@ static int cx18_alsa_load(struct cx18 *cx) s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM]; if (s->video_dev.v4l2_dev == NULL) { - CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - " - "skipping\n", __func__); + CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n", + __func__); return 0; } @@ -232,8 +232,8 @@ static int cx18_alsa_load(struct cx18 *cx) CX18_ALSA_ERR("%s: failed to create struct snd_cx18_card\n", __func__); } else { - CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance " - "\n", __func__); + CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance\n", + __func__); } return 0; } diff --git a/drivers/media/pci/cx18/cx18-av-core.c b/drivers/media/pci/cx18/cx18-av-core.c index 30bbe8d1ea55..7f7306fd9a7f 100644 --- a/drivers/media/pci/cx18/cx18-av-core.c +++ b/drivers/media/pci/cx18/cx18-av-core.c @@ -468,21 +468,19 @@ void cx18_av_std_setup(struct cx18 *cx) CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n", pll / 8000000, (pll / 8) % 1000000); - CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio " - "= %d.%03d\n", src_decimation / 256, + CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio = %d.%03d\n", + src_decimation / 256, ((src_decimation % 256) * 1000) / 256); tmp = 28636360 * (u64) sc; do_div(tmp, src_decimation); fsc = tmp >> 13; CX18_DEBUG_INFO_DEV(sd, - "Chroma sub-carrier initial freq = %d.%06d " - "MHz\n", fsc / 1000000, fsc % 1000000); + "Chroma sub-carrier initial freq = %d.%06d MHz\n", + fsc / 1000000, fsc % 1000000); - CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, " - "vactive %i, vblank656 %i, src_dec %i, " - "burst 0x%02x, luma_lpf %i, uv_lpf %i, " - "comb 0x%02x, sc 0x%06x\n", + CX18_DEBUG_INFO_DEV(sd, + "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n", hblank, hactive, vblank, vactive, vblank656, src_decimation, burst, luma_lpf, uv_lpf, comb, sc); @@ -1069,8 +1067,7 @@ static void log_video_status(struct cx18 *cx) CX18_INFO_DEV(sd, "Specified video input: Composite %d\n", vid_input - CX18_AV_COMPOSITE1 + 1); } else { - CX18_INFO_DEV(sd, "Specified video input: " - "S-Video (Luma In%d, Chroma In%d)\n", + CX18_INFO_DEV(sd, "Specified video input: S-Video (Luma In%d, Chroma In%d)\n", (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8); } diff --git a/drivers/media/pci/cx18/cx18-av-firmware.c b/drivers/media/pci/cx18/cx18-av-firmware.c index a34fd082b76e..160e2e53383f 100644 --- a/drivers/media/pci/cx18/cx18-av-firmware.c +++ b/drivers/media/pci/cx18/cx18-av-firmware.c @@ -61,8 +61,7 @@ static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw) dl_control &= 0xffff3fff; /* ignore top 2 bits of address */ expected = 0x0f000000 | ((u32)data[addr] << 16) | addr; if (expected != dl_control) { - CX18_ERR_DEV(sd, "verification of %s firmware load " - "failed: expected %#010x got %#010x\n", + CX18_ERR_DEV(sd, "verification of %s firmware load failed: expected %#010x got %#010x\n", FWFILE, expected, dl_control); ret = -EIO; break; diff --git a/drivers/media/pci/cx18/cx18-controls.c b/drivers/media/pci/cx18/cx18-controls.c index adb5a8c72c06..812a2507945a 100644 --- a/drivers/media/pci/cx18/cx18-controls.c +++ b/drivers/media/pci/cx18/cx18-controls.c @@ -44,8 +44,7 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) { /* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */ cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE; - CX18_DEBUG_INFO("disabled insertion of sliced VBI data into " - "the MPEG stream\n"); + CX18_DEBUG_INFO("disabled insertion of sliced VBI data into the MPEG stream\n"); return 0; } @@ -63,16 +62,14 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) } cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE; - CX18_WARN("Unable to allocate buffers for " - "sliced VBI data insertion\n"); + CX18_WARN("Unable to allocate buffers for sliced VBI data insertion\n"); return -ENOMEM; } } } cx->vbi.insert_mpeg = fmt; - CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS," - "when sliced VBI is enabled\n"); + CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,when sliced VBI is enabled\n"); /* * If our current settings have no lines set for capture, store a valid, diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c index 2f23b26b16c0..b8eedbe51c8f 100644 --- a/drivers/media/pci/cx18/cx18-driver.c +++ b/drivers/media/pci/cx18/cx18-driver.c @@ -405,8 +405,8 @@ static void cx18_process_eeprom(struct cx18 *cx) CX18_ERR("Invalid EEPROM\n"); return; default: - CX18_ERR("Unknown model %d, defaulting to original HVR-1600 " - "(cardtype=1)\n", tv.model); + CX18_ERR("Unknown model %d, defaulting to original HVR-1600 (cardtype=1)\n", + tv.model); cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT); break; } @@ -635,8 +635,8 @@ static void cx18_process_options(struct cx18 *cx) /* convert from kB to bytes */ cx->stream_buf_size[i] *= 1024; } - CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, " - "%d bytes\n", i, cx->options.megabytes[i], + CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, %d bytes\n", + i, cx->options.megabytes[i], cx->stream_buffers[i], cx->stream_buf_size[i]); } @@ -838,14 +838,13 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev, pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency); if (pci_latency < 64 && cx18_pci_latency) { - CX18_INFO("Unreasonably low latency timer, " - "setting to 64 (was %d)\n", pci_latency); + CX18_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n", + pci_latency); pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency); } - CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, " - "irq: %d, latency: %d, memory: 0x%llx\n", + CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n", cx->pci_dev->device, cx->card_rev, pci_dev->bus->number, PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn), cx->pci_dev->irq, pci_latency, (u64)cx->base_addr); @@ -910,8 +909,8 @@ static int cx18_probe(struct pci_dev *pci_dev, /* FIXME - module parameter arrays constrain max instances */ i = atomic_inc_return(&cx18_instance) - 1; if (i >= CX18_MAX_CARDS) { - printk(KERN_ERR "cx18: cannot manage card %d, driver has a " - "limit of 0 - %d\n", i, CX18_MAX_CARDS - 1); + printk(KERN_ERR "cx18: cannot manage card %d, driver has a limit of 0 - %d\n", + i, CX18_MAX_CARDS - 1); return -ENOMEM; } @@ -926,8 +925,8 @@ static int cx18_probe(struct pci_dev *pci_dev, retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev); if (retval) { - printk(KERN_ERR "cx18: v4l2_device_register of card %d failed" - "\n", cx->instance); + printk(KERN_ERR "cx18: v4l2_device_register of card %d failed\n", + cx->instance); kfree(cx); return retval; } @@ -958,13 +957,10 @@ static int cx18_probe(struct pci_dev *pci_dev, cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE); if (!cx->enc_mem) { - CX18_ERR("ioremap failed. Can't get a window into CX23418 " - "memory and register space\n"); - CX18_ERR("Each capture card with a CX23418 needs 64 MB of " - "vmalloc address space for the window\n"); + CX18_ERR("ioremap failed. Can't get a window into CX23418 memory and register space\n"); + CX18_ERR("Each capture card with a CX23418 needs 64 MB of vmalloc address space for the window\n"); CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); - CX18_ERR("Use the vmalloc= kernel command line option to set " - "VmallocTotal to a larger value\n"); + CX18_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n"); retval = -ENOMEM; goto free_mem; } @@ -1000,8 +996,7 @@ static int cx18_probe(struct pci_dev *pci_dev, /* Initialize GPIO Reset Controller to do chip resets during i2c init */ if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) { if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0) - CX18_WARN("Could not register GPIO reset controller" - "subdevice; proceeding anyway.\n"); + CX18_WARN("Could not register GPIO reset controllersubdevice; proceeding anyway.\n"); else cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL; } diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c index 3eac59c51231..03d0478170a7 100644 --- a/drivers/media/pci/cx18/cx18-dvb.c +++ b/drivers/media/pci/cx18/cx18-dvb.c @@ -155,10 +155,8 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, } if (ret) { - CX18_ERR("The MPC718 board variant with the MT352 DVB-T" - "demodualtor will not work without it\n"); - CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware " - "mpc718' if you need the firmware\n"); + CX18_ERR("The MPC718 board variant with the MT352 DVB-Tdemodualtor will not work without it\n"); + CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware mpc718' if you need the firmware\n"); } return ret; } diff --git a/drivers/media/pci/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c index df837408efd5..78b399b8613e 100644 --- a/drivers/media/pci/cx18/cx18-fileops.c +++ b/drivers/media/pci/cx18/cx18-fileops.c @@ -49,8 +49,7 @@ int cx18_claim_stream(struct cx18_open_id *id, int type) /* Nothing should ever try to directly claim the IDX stream */ if (type == CX18_ENC_STREAM_TYPE_IDX) { - CX18_WARN("MPEG Index stream cannot be claimed " - "directly, but something tried.\n"); + CX18_WARN("MPEG Index stream cannot be claimed directly, but something tried.\n"); return -EINVAL; } @@ -728,8 +727,7 @@ void cx18_stop_capture(struct cx18_open_id *id, int gop_end) /* Stop internal use associated VBI and IDX streams */ if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) && !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) { - CX18_DEBUG_INFO("close stopping embedded VBI " - "capture\n"); + CX18_DEBUG_INFO("close stopping embedded VBI capture\n"); cx18_stop_v4l2_encode_stream(s_vbi, 0); } if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) { diff --git a/drivers/media/pci/cx18/cx18-ioctl.c b/drivers/media/pci/cx18/cx18-ioctl.c index fecca2a63891..0faeb979ceb9 100644 --- a/drivers/media/pci/cx18/cx18-ioctl.c +++ b/drivers/media/pci/cx18/cx18-ioctl.c @@ -951,8 +951,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return 0; h = cx18_find_handle(cx); if (h == CX18_INVALID_TASK_HANDLE) { - CX18_ERR("Can't find valid task handle for " - "V4L2_ENC_CMD_PAUSE\n"); + CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_PAUSE\n"); return -EBADFD; } cx18_mute(cx); @@ -968,8 +967,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh, return 0; h = cx18_find_handle(cx); if (h == CX18_INVALID_TASK_HANDLE) { - CX18_ERR("Can't find valid task handle for " - "V4L2_ENC_CMD_RESUME\n"); + CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_RESUME\n"); return -EBADFD; } cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h); diff --git a/drivers/media/pci/cx18/cx18-irq.c b/drivers/media/pci/cx18/cx18-irq.c index 80edfe93a3d8..361426485e98 100644 --- a/drivers/media/pci/cx18/cx18-irq.c +++ b/drivers/media/pci/cx18/cx18-irq.c @@ -59,8 +59,8 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2); if (sw1 || sw2 || hw2) - CX18_DEBUG_HI_IRQ("received interrupts " - "SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); + CX18_DEBUG_HI_IRQ("received interrupts SW1: %x SW2: %x HW2: %x\n", + sw1, sw2, hw2); /* * SW1 responses have to happen first. The sending XPU times out the diff --git a/drivers/media/pci/cx18/cx18-mailbox.c b/drivers/media/pci/cx18/cx18-mailbox.c index 1f8aa9a749a1..d3cf3588879f 100644 --- a/drivers/media/pci/cx18/cx18-mailbox.c +++ b/drivers/media/pci/cx18/cx18-mailbox.c @@ -123,8 +123,8 @@ static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name) if (!(cx18_debug & CX18_DBGFLG_API)) return; - CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s" - "\n", name, mb->request, mb->ack, mb->cmd, mb->error, + CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s\n", + name, mb->request, mb->ack, mb->cmd, mb->error, u32arr2hex(mb->args, MAX_MB_ARGUMENTS, argstr)); } @@ -255,8 +255,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order) s = cx18_handle_to_stream(cx, handle); if (s == NULL) { - CX18_WARN("Got DMA done notification for unknown/inactive" - " handle %d, %s mailbox seq no %d\n", handle, + CX18_WARN("Got DMA done notification for unknown/inactive handle %d, %s mailbox seq no %d\n", + handle, (order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ? "stale" : "good", mb->request); return; @@ -290,9 +290,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order) if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) && !(id >= s->mdl_base_idx && id < (s->mdl_base_idx + s->buffers))) { - CX18_WARN("Fell behind! Ignoring stale mailbox with " - " inconsistent data. Lost MDL for mailbox " - "seq no %d\n", mb->request); + CX18_WARN("Fell behind! Ignoring stale mailbox with inconsistent data. Lost MDL for mailbox seq no %d\n", + mb->request); break; } mdl = cx18_queue_get_mdl(s, id, mdl_ack->data_used); @@ -418,9 +417,7 @@ static void mb_ack_irq(struct cx18 *cx, struct cx18_in_work_order *order) /* Don't ack if the RPU has gotten impatient and timed us out */ if (req != cx18_readl(cx, &ack_mb->request) || req == cx18_readl(cx, &ack_mb->ack)) { - CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " - "incoming %s to EPU mailbox (sequence no. %u) " - "while processing\n", + CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u) while processing\n", rpu_str[order->rpu], rpu_str[order->rpu], req); order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC; return; @@ -555,8 +552,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu) order = alloc_in_work_order_irq(cx); if (order == NULL) { - CX18_WARN("Unable to find blank work order form to schedule " - "incoming mailbox command processing\n"); + CX18_WARN("Unable to find blank work order form to schedule incoming mailbox command processing\n"); return; } @@ -573,9 +569,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu) (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i); if (order_mb->request == order_mb->ack) { - CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our " - "incoming %s to EPU mailbox (sequence no. %u)" - "\n", + CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u)\n", rpu_str[rpu], rpu_str[rpu], order_mb->request); if (cx18_debug & CX18_DBGFLG_WARN) dump_mb(cx, order_mb, "incoming"); @@ -663,8 +657,8 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) if (req != ack) { /* waited long enough, make the mbox "not busy" from our end */ cx18_writel(cx, req, &mb->ack); - CX18_ERR("mbox was found stuck busy when setting up for %s; " - "clearing busy and trying to proceed\n", info->name); + CX18_ERR("mbox was found stuck busy when setting up for %s; clearing busy and trying to proceed\n", + info->name); } else if (ret != timeout) CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n", jiffies_to_msecs(timeout-ret)); @@ -707,14 +701,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) mutex_unlock(mb_lock); if (ret >= timeout) { /* Timed out */ - CX18_DEBUG_WARN("sending %s timed out waiting %d msecs " - "for RPU acknowledgement\n", + CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU acknowledgment\n", info->name, jiffies_to_msecs(ret)); } else { - CX18_DEBUG_WARN("woken up before mailbox ack was ready " - "after submitting %s to RPU. only " - "waited %d msecs on req %u but awakened" - " with unmatched ack %u\n", + CX18_DEBUG_WARN("woken up before mailbox ack was ready after submitting %s to RPU. only waited %d msecs on req %u but awakened with unmatched ack %u\n", info->name, jiffies_to_msecs(ret), req, ack); @@ -723,8 +713,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (ret >= timeout) - CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment " - "sending %s; timed out waiting %d msecs\n", + CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment sending %s; timed out waiting %d msecs\n", info->name, jiffies_to_msecs(ret)); else CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n", diff --git a/drivers/media/pci/cx18/cx18-queue.c b/drivers/media/pci/cx18/cx18-queue.c index 2a247d264b87..13e96d6055eb 100644 --- a/drivers/media/pci/cx18/cx18-queue.c +++ b/drivers/media/pci/cx18/cx18-queue.c @@ -164,9 +164,8 @@ struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id, mdl->skipped++; if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) { /* mdl must have fallen out of rotation */ - CX18_WARN("Skipped %s, MDL %d, %d " - "times - it must have dropped out of " - "rotation\n", s->name, mdl->id, + CX18_WARN("Skipped %s, MDL %d, %d times - it must have dropped out of rotation\n", + s->name, mdl->id, mdl->skipped); /* Sweep it up to put it back into rotation */ list_move_tail(&mdl->list, &sweep_up); @@ -352,8 +351,7 @@ int cx18_stream_alloc(struct cx18_stream *s) if (s->buffers == 0) return 0; - CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers " - "(%d.%02d kB total)\n", + CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%d.%02d kB total)\n", s->name, s->buffers, s->buf_size, s->buffers * s->buf_size / 1024, (s->buffers * s->buf_size * 100 / 1024) % 100); diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c index f3802ec1b383..7f699f0ee76c 100644 --- a/drivers/media/pci/cx18/cx18-streams.c +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -353,8 +353,8 @@ static int cx18_prep_dev(struct cx18 *cx, int type) if (cx->card->hw_all & CX18_HW_DVB) { s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL); if (s->dvb == NULL) { - CX18_ERR("Couldn't allocate cx18_dvb structure" - " for %s\n", s->name); + CX18_ERR("Couldn't allocate cx18_dvb structure for %s\n", + s->name); return -ENOMEM; } } else { @@ -462,8 +462,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type) case VFL_TYPE_VBI: if (cx->stream_buffers[type]) - CX18_INFO("Registered device %s for %s " - "(%d x %d bytes)\n", + CX18_INFO("Registered device %s for %s (%d x %d bytes)\n", name, s->name, cx->stream_buffers[type], cx->stream_buf_size[type]); else diff --git a/drivers/media/pci/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c index 631e4f24aea6..d644c65622e2 100644 --- a/drivers/media/pci/cx23885/cimax2.c +++ b/drivers/media/pci/cx23885/cimax2.c @@ -365,11 +365,8 @@ static void netup_read_ci_status(struct work_struct *work) if (ret != 0) return; - ci_dbg_print("%s: Slot Status Addr=[0x%04x], " - "Reg=[0x%02x], data=%02x, " - "TS config = %02x\n", __func__, - state->ci_i2c_addr, 0, buf[0], - buf[0]); + ci_dbg_print("%s: Slot Status Addr=[0x%04x], Reg=[0x%02x], data=%02x, TS config = %02x\n", + __func__, state->ci_i2c_addr, 0, buf[0], buf[0]); if (buf[0] & 1) diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c index da892f3e3c29..0c122585a1f0 100644 --- a/drivers/media/pci/cx23885/cx23885-417.c +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -770,9 +770,8 @@ static int cx23885_mbox_func(void *priv, mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value); if (value != 0x12345678) { printk(KERN_ERR - "Firmware and/or mailbox pointer not initialized " - "or corrupted, signature = 0x%x, cmd = %s\n", value, - cmd_to_str(command)); + "Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x%x, cmd = %s\n", + value, cmd_to_str(command)); return -1; } @@ -781,8 +780,8 @@ static int cx23885_mbox_func(void *priv, */ mc417_memory_read(dev, dev->cx23417_mailbox, &flag); if (flag) { - printk(KERN_ERR "ERROR: Mailbox appears to be in use " - "(%x), cmd = %s\n", flag, cmd_to_str(command)); + printk(KERN_ERR "ERROR: Mailbox appears to be in use (%x), cmd = %s\n", + flag, cmd_to_str(command)); return -1; } @@ -935,14 +934,12 @@ static int cx23885_load_firmware(struct cx23885_dev *dev) printk(KERN_ERR "ERROR: Hotplug firmware request failed (%s).\n", CX23885_FIRM_IMAGE_NAME); - printk(KERN_ERR "Please fix your hotplug setup, the board will " - "not work without firmware loaded!\n"); + printk(KERN_ERR "Please fix your hotplug setup, the board will not work without firmware loaded!\n"); return -1; } if (firmware->size != CX23885_FIRM_IMAGE_SIZE) { - printk(KERN_ERR "ERROR: Firmware size mismatch " - "(have %zu, expected %d)\n", + printk(KERN_ERR "ERROR: Firmware size mismatch (have %zu, expected %d)\n", firmware->size, CX23885_FIRM_IMAGE_SIZE); release_firmware(firmware); return -1; @@ -1077,8 +1074,7 @@ static int cx23885_initialize_codec(struct cx23885_dev *dev, int startencoder) retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, &version); if (retval < 0) { - printk(KERN_ERR "ERROR: cx23417 firmware get encoder :" - "version failed!\n"); + printk(KERN_ERR "ERROR: cx23417 firmware get encoder :version failed!\n"); return -1; } dprintk(1, "cx23417 firmware version is 0x%08x\n", version); diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c index 6115d4e148ba..9d2a4e2dc54f 100644 --- a/drivers/media/pci/cx23885/cx23885-alsa.c +++ b/drivers/media/pci/cx23885/cx23885-alsa.c @@ -186,8 +186,8 @@ static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip) cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); atomic_set(&chip->count, 0); - dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d " - "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1, + dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n", + buf->bpl, cx_read(audio_ch->cmds_start+12)>>1, chip->num_periods, buf->bpl * chip->num_periods); /* Enables corresponding bits at AUD_INT_STAT */ @@ -327,8 +327,7 @@ static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream) int err; if (!chip) { - printk(KERN_ERR "BUG: cx23885 can't find device struct." - " Can't proceed with open\n"); + printk(KERN_ERR "BUG: cx23885 can't find device struct. Can't proceed with open\n"); return -ENODEV; } @@ -555,8 +554,8 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev) return NULL; if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) { - printk(KERN_WARNING "%s(): Missing SRAM channel configuration " - "for analog TV Audio\n", __func__); + printk(KERN_WARNING "%s(): Missing SRAM channel configuration for analog TV Audio\n", + __func__); return NULL; } @@ -590,8 +589,8 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev) error: snd_card_free(card); - printk(KERN_ERR "%s(): Failed to register analog " - "audio adapter\n", __func__); + printk(KERN_ERR "%s(): Failed to register analog audio adapter\n", + __func__); return NULL; } diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 99ba8d6328f0..e2c4edbfbdb7 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -1304,8 +1304,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) */ break; default: - printk(KERN_WARNING "%s: warning: " - "unknown hauppauge model #%d\n", + printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model); break; } @@ -2342,9 +2341,8 @@ void cx23885_card_setup(struct cx23885_dev *dev) ret = request_firmware(&fw, filename, &dev->pci->dev); if (ret != 0) - printk(KERN_ERR "did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details " - "on firmware-problems.", filename); + printk(KERN_ERR "did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.", + filename); else altera_init(&netup_config, fw); diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c index c86b1093ab99..5020a60a4f1f 100644 --- a/drivers/media/pci/cx23885/cx23885-core.c +++ b/drivers/media/pci/cx23885/cx23885-core.c @@ -915,8 +915,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_init_tsport(dev, &dev->ts2, 2); if (get_resources(dev) < 0) { - printk(KERN_ERR "CORE %s No more PCIe resources for " - "subsystem: %04x:%04x\n", + printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n", dev->name, dev->pci->subsystem_vendor, dev->pci->subsystem_device); @@ -980,8 +979,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { if (cx23885_video_register(dev) < 0) { - printk(KERN_ERR "%s() Failed to register analog " - "video adapters on VID_A\n", __func__); + printk(KERN_ERR "%s() Failed to register analog video adapters on VID_A\n", + __func__); } } @@ -1579,8 +1578,8 @@ int cx23885_irq_417(struct cx23885_dev *dev, u32 status) (status & VID_B_MSK_VBI_SYNC) || (status & VID_B_MSK_OF) || (status & VID_B_MSK_VBI_OF)) { - printk(KERN_ERR "%s: V4L mpeg risc op code error, status " - "= 0x%x\n", dev->name, status); + printk(KERN_ERR "%s: V4L mpeg risc op code error, status = 0x%x\n", + dev->name, status); if (status & VID_B_MSK_BAD_PKT) dprintk(1, " VID_B_MSK_BAD_PKT\n"); if (status & VID_B_MSK_OPC_ERR) @@ -1995,8 +1994,8 @@ static int cx23885_initdev(struct pci_dev *pci_dev, /* print pci info */ dev->pci_rev = pci_dev->revision; pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); - printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " - "latency: %d, mmio: 0x%llx\n", dev->name, + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, dev->pci_lat, (unsigned long long)pci_resource_start(pci_dev, 0)); diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 818f3c2fc98d..42413fa423b4 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -2482,8 +2482,7 @@ static int dvb_register(struct cx23885_tsport *port) break; default: - printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " - " isn't supported yet\n", + printk(KERN_INFO "%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); break; } diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c index 33d168ef278d..92ff452e5886 100644 --- a/drivers/media/pci/cx23885/cx23885-video.c +++ b/drivers/media/pci/cx23885/cx23885-video.c @@ -1065,8 +1065,7 @@ int cx23885_video_irq(struct cx23885_dev *dev, u32 status) } if (status & VID_BC_MSK_SYNC) - dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) " - "video lines miss-match\n", + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) video lines miss-match\n", VID_BC_MSK_SYNC); if (status & VID_BC_MSK_OF) diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c index c1aa888af705..3115cfddab95 100644 --- a/drivers/media/pci/cx23885/cx23888-ir.c +++ b/drivers/media/pci/cx23885/cx23888-ir.c @@ -1015,8 +1015,8 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd) j = 0; break; } - v4l2_info(sd, "\tNext carrier edge window: 16 clocks " - "-%1d/+%1d, %u to %u Hz\n", i, j, + v4l2_info(sd, "\tNext carrier edge window: 16 clocks -%1d/+%1d, %u to %u Hz\n", + i, j, clock_divider_to_freq(rxclk, 16 + j), clock_divider_to_freq(rxclk, 16 - i)); } @@ -1026,8 +1026,7 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd) v4l2_info(sd, "\tLow pass filter: %s\n", filtr ? "enabled" : "disabled"); if (filtr) - v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, " - "%u ns\n", + v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, %u ns\n", lpf_count_to_us(filtr), lpf_count_to_ns(filtr)); v4l2_info(sd, "\tPulse width timer timed-out: %s\n", diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c index 723f06462104..495f9a0569e0 100644 --- a/drivers/media/pci/cx88/cx88-alsa.c +++ b/drivers/media/pci/cx88/cx88-alsa.c @@ -120,9 +120,7 @@ MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); MODULE_LICENSE("GPL"); MODULE_VERSION(CX88_VERSION); -MODULE_SUPPORTED_DEVICE("{{Conexant,23881}," - "{{Conexant,23882}," - "{{Conexant,23883}"); +MODULE_SUPPORTED_DEVICE("{{Conexant,23881},{{Conexant,23882},{{Conexant,23883}"); static unsigned int debug; module_param(debug,int,0644); MODULE_PARM_DESC(debug,"enable debug messages"); @@ -154,8 +152,8 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip) cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET); atomic_set(&chip->count, 0); - dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d " - "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1, + dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n", + buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1, chip->num_periods, buf->bpl * chip->num_periods); /* Enables corresponding bits at AUD_INT_STAT */ @@ -425,8 +423,7 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream) int err; if (!chip) { - printk(KERN_ERR "BUG: cx88 can't find device struct." - " Can't proceed with open\n"); + printk(KERN_ERR "BUG: cx88 can't find device struct. Can't proceed with open\n"); return -ENODEV; } @@ -914,8 +911,8 @@ static int snd_cx88_create(struct snd_card *card, struct pci_dev *pci, /* print pci info */ pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat); - dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, " - "latency: %d, mmio: 0x%llx\n", core->name, devno, + dprintk(1, "ALSA %s/%i: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + core->name, devno, pci_name(pci), pci->revision, pci->irq, pci_lat, (unsigned long long)pci_resource_start(pci,0)); diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c index 8f2556ec3971..31295b36dafc 100644 --- a/drivers/media/pci/cx88/cx88-cards.c +++ b/drivers/media/pci/cx88/cx88-cards.c @@ -2847,8 +2847,7 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data) break; } - info_printk(core, "Leadtek Winfast 2000XP Expert config: " - "tuner=%d, eeprom[0]=0x%02x\n", + info_printk(core, "Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n", core->board.tuner_type, eeprom_data[0]); } @@ -3107,8 +3106,8 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core) msg.len = (i != 12 ? 5 : 2); err = i2c_transfer(&core->i2c_adap, &msg, 1); if (err != 1) { - warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d " - "failed (err = %d)!\n", i, err); + warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n", + i, err); return; } } @@ -3284,8 +3283,7 @@ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci) "%s: version might help as well.\n", core->name,core->name,core->name,core->name); } - err_printk(core, "Here is a list of valid choices for the card=<n> " - "insmod option:\n"); + err_printk(core, "Here is a list of valid choices for the card=<n> insmod option:\n"); for (i = 0; i < ARRAY_SIZE(cx88_boards); i++) printk(KERN_ERR "%s: card=%d -> %s\n", core->name, i, cx88_boards[i].name); @@ -3510,8 +3508,8 @@ static void cx88_card_setup(struct cx88_core *core) for (i = 0; i < ARRAY_SIZE(buffer); i++) if (2 != i2c_master_send(&core->i2c_client, buffer[i],2)) - warn_printk(core, "Unable to enable " - "tuner(%i).\n", i); + warn_printk(core, "Unable to enable tuner(%i).\n", + i); } break; case CX88_BOARD_MSI_TVANYWHERE_MASTER: diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c index a9907265ff66..33f3c58f8197 100644 --- a/drivers/media/pci/cx88/cx88-dsp.c +++ b/drivers/media/pci/cx88/cx88-dsp.c @@ -31,7 +31,7 @@ #define INT_PI ((s32)(3.141592653589 * 32768.0)) #define compat_remainder(a, b) \ - ((float)(((s32)((a)*100))%((s32)((b)*100)))/100.0) + ((float)(((s32)((a) * 100)) % ((s32)((b) * 100))) / 100.0) #define baseband_freq(carrier, srate, tone) ((s32)( \ (compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI)) @@ -82,15 +82,15 @@ static s32 int_cos(u32 x) if (period % 2) return -int_cos(x - INT_PI); x = x % INT_PI; - if (x > INT_PI/2) - return -int_cos(INT_PI/2 - (x % (INT_PI/2))); + if (x > INT_PI / 2) + return -int_cos(INT_PI / 2 - (x % (INT_PI / 2))); /* Now x is between 0 and INT_PI/2. * To calculate cos(x) we use it's Taylor polinom. */ - t2 = x*x/32768/2; - t4 = t2*x/32768*x/32768/3/4; - t6 = t4*x/32768*x/32768/5/6; - t8 = t6*x/32768*x/32768/7/8; - ret = 32768-t2+t4-t6+t8; + t2 = x * x / 32768 / 2; + t4 = t2 * x / 32768 * x / 32768 / 3 / 4; + t6 = t4 * x / 32768 * x / 32768 / 5 / 6; + t8 = t6 * x / 32768 * x / 32768 / 7 / 8; + ret = 32768 - t2 + t4 - t6 + t8; return ret; } @@ -100,14 +100,14 @@ static u32 int_goertzel(s16 x[], u32 N, u32 freq) * given frequency in the signal */ s32 s_prev = 0; s32 s_prev2 = 0; - s32 coeff = 2*int_cos(freq); + s32 coeff = 2 * int_cos(freq); u32 i; u64 tmp; u32 divisor; for (i = 0; i < N; i++) { - s32 s = x[i] + ((s64)coeff*s_prev/32768) - s_prev2; + s32 s = x[i] + ((s64)coeff * s_prev / 32768) - s_prev2; s_prev2 = s_prev; s_prev = s; } @@ -138,7 +138,7 @@ static u32 noise_magnitude(s16 x[], u32 N, u32 freq_start, u32 freq_end) if (N > 192) { /* The last 192 samples are enough for noise detection */ - x += (N-192); + x += (N - 192); N = 192; } @@ -186,8 +186,8 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N) dual = freq_magnitude(x, N, dual_freq); noise = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END); - dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, " - "noise=%d\n", carrier, stereo, dual, noise); + dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, noise=%d\n", + carrier, stereo, dual, noise); if (stereo > dual) ret = V4L2_TUNER_SUB_STEREO; @@ -196,8 +196,8 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N) if (core->tvaudio == WW_EIAJ) { /* EIAJ checks may need adjustments */ - if ((carrier > max(stereo, dual)*2) && - (carrier < max(stereo, dual)*6) && + if ((carrier > max(stereo, dual) * 2) && + (carrier < max(stereo, dual) * 6) && (carrier > 20 && carrier < 200) && (max(stereo, dual) > min(stereo, dual))) { /* For EIAJ the carrier is always present, @@ -205,11 +205,11 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N) return ret; } } else { - if ((carrier > max(stereo, dual)*2) && - (carrier < max(stereo, dual)*8) && + if ((carrier > max(stereo, dual) * 2) && + (carrier < max(stereo, dual) * 8) && (carrier > 20 && carrier < 200) && (noise < 10) && - (max(stereo, dual) > min(stereo, dual)*2)) { + (max(stereo, dual) > min(stereo, dual) * 2)) { return ret; } } @@ -222,8 +222,8 @@ static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N) s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP); s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF); s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL); - dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d" - "\n", dual_ref, dual, sap_ref, sap); + dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d\n", + dual_ref, dual, sap_ref, sap); /* FIXME: Currently not supported */ return UNSET; } @@ -234,26 +234,25 @@ static s16 *read_rds_samples(struct cx88_core *core, u32 *N) s16 *samples; unsigned int i; - unsigned int bpl = srch->fifo_size/AUD_RDS_LINES; - unsigned int spl = bpl/4; - unsigned int sample_count = spl*(AUD_RDS_LINES-1); + unsigned int bpl = srch->fifo_size / AUD_RDS_LINES; + unsigned int spl = bpl / 4; + unsigned int sample_count = spl * (AUD_RDS_LINES - 1); u32 current_address = cx_read(srch->ptr1_reg); u32 offset = (current_address - srch->fifo_start + bpl); - dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), " - "sample_count=%d, aud_intstat=%08x\n", current_address, + dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), sample_count=%d, aud_intstat=%08x\n", + current_address, current_address - srch->fifo_start, sample_count, cx_read(MO_AUD_INTSTAT)); - - samples = kmalloc(sizeof(s16)*sample_count, GFP_KERNEL); + samples = kmalloc_array(sample_count, sizeof(*samples), GFP_KERNEL); if (!samples) return NULL; *N = sample_count; for (i = 0; i < sample_count; i++) { - offset = offset % (AUD_RDS_LINES*bpl); + offset = offset % (AUD_RDS_LINES * bpl); samples[i] = cx_read(srch->fifo_start + offset); offset += 4; } diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c index ac2392d8887a..157bc14874eb 100644 --- a/drivers/media/pci/cx88/cx88-dvb.c +++ b/drivers/media/pci/cx88/cx88-dvb.c @@ -625,8 +625,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) return -EINVAL; if (!fe0->dvb.frontend) { - printk(KERN_ERR "%s/2: dvb frontend not attached. " - "Can't attach xc3028\n", + printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc3028\n", dev->core->name); return -EINVAL; } @@ -665,8 +664,7 @@ static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg) return -EINVAL; if (!fe0->dvb.frontend) { - printk(KERN_ERR "%s/2: dvb frontend not attached. " - "Can't attach xc4000\n", + printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc4000\n", dev->core->name); return -EINVAL; } @@ -1771,7 +1769,6 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) if (err) goto fail_core; - err = -ENODEV; for (i = 1; i <= core->board.num_frontends; i++) { struct vb2_queue *q; @@ -1779,6 +1776,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) if (fe == NULL) { printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i); + err = -ENODEV; goto fail_probe; } q = &fe->dvb.dvbq; diff --git a/drivers/media/pci/cx88/cx88-i2c.c b/drivers/media/pci/cx88/cx88-i2c.c index cf2d69615838..804f7417d19f 100644 --- a/drivers/media/pci/cx88/cx88-i2c.c +++ b/drivers/media/pci/cx88/cx88-i2c.c @@ -45,8 +45,7 @@ MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); static unsigned int i2c_udelay = 5; module_param(i2c_udelay, int, 0644); -MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs " - "(should be 5 or higher). Lower value means higher bus speed."); +MODULE_PARM_DESC(i2c_udelay, "i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed."); #define dprintk(level,fmt, arg...) if (i2c_debug >= level) \ printk(KERN_DEBUG "%s: " fmt, core->name , ## arg) diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c index 245357adbc25..86b46b62d985 100644 --- a/drivers/media/pci/cx88/cx88-mpeg.c +++ b/drivers/media/pci/cx88/cx88-mpeg.c @@ -401,8 +401,8 @@ static int cx8802_init_common(struct cx8802_dev *dev) dev->pci_rev = dev->pci->revision; pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat); - printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, " - "latency: %d, mmio: 0x%llx\n", dev->core->name, + printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + dev->core->name, pci_name(dev->pci), dev->pci_rev, dev->pci->irq, dev->pci_lat,(unsigned long long)pci_resource_start(dev->pci,0)); @@ -690,8 +690,8 @@ int cx8802_unregister_driver(struct cx8802_driver *drv) list_del(&d->drvlist); kfree(d); } else - printk(KERN_ERR "%s/2: cx8802 driver remove " - "failed (%d)\n", dev->core->name, err); + printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n", + dev->core->name, err); } mutex_unlock(&dev->core->lock); @@ -768,8 +768,7 @@ static void cx8802_remove(struct pci_dev *pci_dev) struct cx8802_driver *drv, *tmp; int err; - printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver " - "while cx8802 sub-drivers still loaded?!\n", + printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n", dev->core->name); list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) { @@ -777,8 +776,8 @@ static void cx8802_remove(struct pci_dev *pci_dev) if (err == 0) { list_del(&drv->drvlist); } else - printk(KERN_ERR "%s/2: cx8802 driver remove " - "failed (%d)\n", dev->core->name, err); + printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n", + dev->core->name, err); kfree(drv); } } diff --git a/drivers/media/pci/cx88/cx88-tvaudio.c b/drivers/media/pci/cx88/cx88-tvaudio.c index 6bbce6ad6295..dd8e6f324204 100644 --- a/drivers/media/pci/cx88/cx88-tvaudio.c +++ b/drivers/media/pci/cx88/cx88-tvaudio.c @@ -62,8 +62,7 @@ MODULE_PARM_DESC(always_analog,"force analog audio out"); static unsigned int radio_deemphasis; module_param(radio_deemphasis,int,0644); -MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, " - "0=None, 1=50us (elsewhere), 2=75us (USA)"); +MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, 0=None, 1=50us (elsewhere), 2=75us (USA)"); #define dprintk(fmt, arg...) if (audio_debug) \ printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg) @@ -976,8 +975,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) } if (UNSET != ctl) { - dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x " - "[status=0x%x,ctl=0x%x,vol=0x%x]\n", + dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x [status=0x%x,ctl=0x%x,vol=0x%x]\n", mask, ctl, cx_read(AUD_STATUS), cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL)); cx_andor(AUD_CTL, mask, ctl); diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c index d83eb3b10f54..418e2db40b39 100644 --- a/drivers/media/pci/cx88/cx88-video.c +++ b/drivers/media/pci/cx88/cx88-video.c @@ -1307,8 +1307,8 @@ static int cx8800_initdev(struct pci_dev *pci_dev, /* print pci info */ dev->pci_rev = pci_dev->revision; pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); - printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " - "latency: %d, mmio: 0x%llx\n", core->name, + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + core->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0)); diff --git a/drivers/media/pci/ddbridge/ddbridge-core.c b/drivers/media/pci/ddbridge/ddbridge-core.c index 18e3a4deee64..a6c9fe235974 100644 --- a/drivers/media/pci/ddbridge/ddbridge-core.c +++ b/drivers/media/pci/ddbridge/ddbridge-core.c @@ -824,8 +824,7 @@ static int dvb_input_attach(struct ddb_input *input) &input->port->dev->pdev->dev, adapter_nr); if (ret < 0) { - printk(KERN_ERR "ddbridge: Could not register adapter." - "Check if you enabled enough adapters in dvb-core!\n"); + printk(KERN_ERR "ddbridge: Could not register adapter.Check if you enabled enough adapters in dvb-core!\n"); return ret; } input->attached = 1; @@ -1730,8 +1729,7 @@ static __init int module_init_ddbridge(void) { int ret; - printk(KERN_INFO "Digital Devices PCIE bridge driver, " - "Copyright (C) 2010-11 Digital Devices GmbH\n"); + printk(KERN_INFO "Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n"); ret = ddb_class_create(); if (ret < 0) diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index 5dd504741b12..a589aa78d1d9 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -315,8 +315,7 @@ static void dm1105_card_list(struct pci_dev *pci) "dm1105: Updating to the latest version might help\n" "dm1105: as well.\n"); } - printk(KERN_ERR "Here is a list of valid choices for the card=<n> " - "insmod option:\n"); + printk(KERN_ERR "Here is a list of valid choices for the card=<n> insmod option:\n"); for (i = 0; i < ARRAY_SIZE(dm1105_boards); i++) printk(KERN_ERR "dm1105: card=%d -> %s\n", i, dm1105_boards[i].name); diff --git a/drivers/media/pci/ivtv/ivtv-alsa-main.c b/drivers/media/pci/ivtv/ivtv-alsa-main.c index 8a86b61a896d..374f45f81ab3 100644 --- a/drivers/media/pci/ivtv/ivtv-alsa-main.c +++ b/drivers/media/pci/ivtv/ivtv-alsa-main.c @@ -177,8 +177,8 @@ static int snd_ivtv_init(struct v4l2_device *v4l2_dev) #if 0 ret = snd_ivtv_mixer_create(itvsc); if (ret) { - IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d:" - " proceeding anyway\n", __func__, ret); + IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d: proceeding anyway\n", + __func__, ret); } #endif @@ -235,8 +235,8 @@ static int ivtv_alsa_load(struct ivtv *itv) s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM]; if (s->vdev.v4l2_dev == NULL) { - IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - " - "skipping\n", __func__); + IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n", + __func__); return 0; } @@ -250,8 +250,8 @@ static int ivtv_alsa_load(struct ivtv *itv) IVTV_ALSA_ERR("%s: failed to create struct snd_ivtv_card\n", __func__); } else { - IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance " - "\n", __func__); + IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance \n", + __func__); } return 0; } diff --git a/drivers/media/pci/ivtv/ivtv-driver.c b/drivers/media/pci/ivtv/ivtv-driver.c index ee48c3e09de4..0a3b80a4bd69 100644 --- a/drivers/media/pci/ivtv/ivtv-driver.c +++ b/drivers/media/pci/ivtv/ivtv-driver.c @@ -885,8 +885,8 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev, pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); if (pci_latency < 64 && ivtv_pci_latency) { - IVTV_INFO("Unreasonably low latency timer, " - "setting to 64 (was %d)\n", pci_latency); + IVTV_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n", + pci_latency); pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); } @@ -896,8 +896,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev, these problems. */ pci_write_config_dword(pdev, 0x40, 0xffff); - IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, " - "irq: %d, latency: %d, memory: 0x%llx\n", + IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n", pdev->device, pdev->revision, pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), pdev->irq, pci_latency, (u64)itv->base_addr); @@ -1047,13 +1046,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); if (!itv->enc_mem) { - IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 " - "encoder memory\n"); - IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of " - "vmalloc address space for this window\n"); + IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 encoder memory\n"); + IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of vmalloc address space for this window\n"); IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); - IVTV_ERR("Use the vmalloc= kernel command line option to set " - "VmallocTotal to a larger value\n"); + IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n"); retval = -ENOMEM; goto free_mem; } @@ -1064,14 +1060,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); if (!itv->dec_mem) { - IVTV_ERR("ioremap failed. Can't get a window into " - "CX23415 decoder memory\n"); - IVTV_ERR("Each capture card with a CX23415 needs 8 MB " - "of vmalloc address space for this window\n"); - IVTV_ERR("Check the output of 'grep Vmalloc " - "/proc/meminfo'\n"); - IVTV_ERR("Use the vmalloc= kernel command line option " - "to set VmallocTotal to a larger value\n"); + IVTV_ERR("ioremap failed. Can't get a window into CX23415 decoder memory\n"); + IVTV_ERR("Each capture card with a CX23415 needs 8 MB of vmalloc address space for this window\n"); + IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); + IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n"); retval = -ENOMEM; goto free_mem; } @@ -1086,13 +1078,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) itv->reg_mem = ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); if (!itv->reg_mem) { - IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 " - "register space\n"); - IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of " - "vmalloc address space for this window\n"); + IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 register space\n"); + IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of vmalloc address space for this window\n"); IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); - IVTV_ERR("Use the vmalloc= kernel command line option to set " - "VmallocTotal to a larger value\n"); + IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n"); retval = -ENOMEM; goto free_io; } diff --git a/drivers/media/pci/ivtv/ivtv-firmware.c b/drivers/media/pci/ivtv/ivtv-firmware.c index 5b3095f65dce..ba279fdb3df8 100644 --- a/drivers/media/pci/ivtv/ivtv-firmware.c +++ b/drivers/media/pci/ivtv/ivtv-firmware.c @@ -376,8 +376,8 @@ int ivtv_firmware_check(struct ivtv *itv, char *where) /* If something failed & currently idle, try to reload */ if (res && !atomic_read(&itv->capturing) && !atomic_read(&itv->decoding)) { - IVTV_INFO("Detected in %s that firmware had failed - " - "Reloading\n", where); + IVTV_INFO("Detected in %s that firmware had failed - Reloading\n", + where); res = ivtv_firmware_restart(itv); /* * Even if restarted ok, still signal a problem had occurred. diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c index f7299d3d8244..44936d6d7c39 100644 --- a/drivers/media/pci/ivtv/ivtv-yuv.c +++ b/drivers/media/pci/ivtv/ivtv-yuv.c @@ -89,8 +89,8 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, if (y_pages == y_dma.page_count) { IVTV_DEBUG_WARN - ("failed to map uv user pages, returned %d " - "expecting %d\n", uv_pages, uv_dma.page_count); + ("failed to map uv user pages, returned %d expecting %d\n", + uv_pages, uv_dma.page_count); if (uv_pages >= 0) { for (i = 0; i < uv_pages; i++) @@ -101,8 +101,8 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, } } else { IVTV_DEBUG_WARN - ("failed to map y user pages, returned %d " - "expecting %d\n", y_pages, y_dma.page_count); + ("failed to map y user pages, returned %d expecting %d\n", + y_pages, y_dma.page_count); } if (y_pages >= 0) { for (i = 0; i < y_pages; i++) diff --git a/drivers/media/pci/ivtv/ivtvfb.c b/drivers/media/pci/ivtv/ivtvfb.c index 8b95eefb610b..612a8402cf4d 100644 --- a/drivers/media/pci/ivtv/ivtvfb.c +++ b/drivers/media/pci/ivtv/ivtvfb.c @@ -293,8 +293,7 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, /* Map User DMA */ if (ivtv_udma_setup(itv, ivtv_dest_addr, userbuf, size_in_bytes) <= 0) { mutex_unlock(&itv->udma.lock); - IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, " - "Error with get_user_pages: %d bytes, %d pages returned\n", + IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, Error with get_user_pages: %d bytes, %d pages returned\n", size_in_bytes, itv->udma.page_count); /* get_user_pages must have failed completely */ diff --git a/drivers/media/pci/meye/meye.c b/drivers/media/pci/meye/meye.c index ba887e8e1b17..e825bc93ea7a 100644 --- a/drivers/media/pci/meye/meye.c +++ b/drivers/media/pci/meye/meye.c @@ -60,8 +60,7 @@ MODULE_PARM_DESC(gbuffers, "number of capture buffers, default is 2 (32 max)"); /* size of a grab buffer */ static unsigned int gbufsize = MEYE_MAX_BUFSIZE; module_param(gbufsize, int, 0444); -MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400" - " (will be rounded up to a page multiple)"); +MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400 (will be rounded up to a page multiple)"); /* /dev/videoX registration number */ static int video_nr = -1; @@ -587,10 +586,7 @@ static void mchip_hic_stop(void) /* get the next ready frame from the dma engine */ static u32 mchip_get_frame(void) { - u32 v; - - v = mchip_read(MCHIP_MM_FIR(meye.mchip_fnum)); - return v; + return mchip_read(MCHIP_MM_FIR(meye.mchip_fnum)); } /* frees the current frame from the dma engine */ @@ -1261,8 +1257,7 @@ static int vidioc_reqbufs(struct file *file, void *fh, meye.grab_fbuffer = rvmalloc(gbuffers * gbufsize); if (!meye.grab_fbuffer) { - printk(KERN_ERR "meye: v4l framebuffer allocation" - " failed\n"); + printk(KERN_ERR "meye: v4l framebuffer allocation failed\n"); mutex_unlock(&meye.lock); return -ENOMEM; } @@ -1659,8 +1654,7 @@ static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) ret = -EIO; if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) { v4l2_err(v4l2_dev, "meye: unable to power on the camera\n"); - v4l2_err(v4l2_dev, "meye: did you enable the camera in " - "sonypi using the module options ?\n"); + v4l2_err(v4l2_dev, "meye: did you enable the camera in sonypi using the module options ?\n"); goto outsonypienable; } @@ -1834,8 +1828,7 @@ static int __init meye_init(void) if (gbufsize > MEYE_MAX_BUFSIZE) gbufsize = MEYE_MAX_BUFSIZE; gbufsize = PAGE_ALIGN(gbufsize); - printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) " - "for capture\n", + printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) for capture\n", gbuffers, gbufsize / 1024, gbuffers * gbufsize / 1024); return pci_register_driver(&meye_driver); diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c index e7e4428109c3..d5ee82aee9e8 100644 --- a/drivers/media/pci/pt1/pt1.c +++ b/drivers/media/pci/pt1/pt1.c @@ -282,13 +282,12 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) continue; if (upacket >> 24 & 1) - printk_ratelimited(KERN_INFO "earth-pt1: device " - "buffer overflowing. table[%d] buf[%d]\n", + printk_ratelimited(KERN_INFO "earth-pt1: device buffer overflowing. table[%d] buf[%d]\n", pt1->table_index, pt1->buf_index); sc = upacket >> 26 & 0x7; if (adap->st_count != -1 && sc != ((adap->st_count + 1) & 0x7)) - printk_ratelimited(KERN_INFO "earth-pt1: data loss" - " in streamID(adapter)[%d]\n", index); + printk_ratelimited(KERN_INFO "earth-pt1: data loss in streamID(adapter)[%d]\n", + index); adap->st_count = sc; buf = adap->buf; diff --git a/drivers/media/pci/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c index dc0e2fc5f68b..8a35ecfb75e3 100644 --- a/drivers/media/pci/saa7134/saa7134-alsa.c +++ b/drivers/media/pci/saa7134/saa7134-alsa.c @@ -813,8 +813,7 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) int amux, err; if (!saa7134) { - pr_err("BUG: saa7134 can't find device struct." - " Can't proceed with open\n"); + pr_err("BUG: saa7134 can't find device struct. Can't proceed with open\n"); return -ENODEV; } dev = saa7134->dev; diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c index c480a7e87593..2b60af493de4 100644 --- a/drivers/media/pci/saa7134/saa7134-cards.c +++ b/drivers/media/pci/saa7134/saa7134-cards.c @@ -7341,8 +7341,8 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data) case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ break; default: - pr_warn("%s: warning: " - "unknown hauppauge model #%d\n", dev->name, tv.model); + pr_warn("%s: warning: unknown hauppauge model #%d\n", + dev->name, tv.model); break; } @@ -7920,8 +7920,8 @@ int saa7134_board_init2(struct saa7134_dev *dev) msg.addr = 0x0b; msg.len = 1; if (1 != i2c_transfer(&dev->i2c_adap, &msg, 1)) { - pr_warn("%s: send wake up byte to pic16C505" - "(IR chip) failed\n", dev->name); + pr_warn("%s: send wake up byte to pic16C505(IR chip) failed\n", + dev->name); } else { msg.flags = I2C_M_RD; rc = i2c_transfer(&dev->i2c_adap, &msg, 1); diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c index ffb66a9ae23e..7d6bb5c9343f 100644 --- a/drivers/media/pci/saa7134/saa7134-core.c +++ b/drivers/media/pci/saa7134/saa7134-core.c @@ -66,8 +66,7 @@ MODULE_PARM_DESC(latency,"pci latency timer"); int saa7134_no_overlay=-1; module_param_named(no_overlay, saa7134_no_overlay, int, 0444); -MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" - " [some VIA/SIS chipsets are known to have problem with overlay]"); +MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]"); bool saa7134_userptr; module_param(saa7134_userptr, bool, 0644); @@ -619,25 +618,25 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id) print_irqstatus(dev,loop,report,status); if (report & SAA7134_IRQ_REPORT_PE) { /* disable all parity error */ - pr_warn("%s/irq: looping -- " - "clearing PE (parity error!) enable bit\n",dev->name); + pr_warn("%s/irq: looping -- clearing PE (parity error!) enable bit\n", + dev->name); saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE); } else if (report & SAA7134_IRQ_REPORT_GPIO16) { /* disable gpio16 IRQ */ - pr_warn("%s/irq: looping -- " - "clearing GPIO16 enable bit\n",dev->name); + pr_warn("%s/irq: looping -- clearing GPIO16 enable bit\n", + dev->name); saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P); saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N); } else if (report & SAA7134_IRQ_REPORT_GPIO18) { /* disable gpio18 IRQs */ - pr_warn("%s/irq: looping -- " - "clearing GPIO18 enable bit\n",dev->name); + pr_warn("%s/irq: looping -- clearing GPIO18 enable bit\n", + dev->name); saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P); saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N); } else { /* disable all irqs */ - pr_warn("%s/irq: looping -- " - "clearing all enable bits\n",dev->name); + pr_warn("%s/irq: looping -- clearing all enable bits\n", + dev->name); saa_writel(SAA7134_IRQ1,0); saa_writel(SAA7134_IRQ2,0); } @@ -1081,18 +1080,14 @@ static int saa7134_initdev(struct pci_dev *pci_dev, } #endif if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) { - pr_info("%s: quirk: this driver and your " - "chipset may not work together" - " in overlay mode.\n",dev->name); + pr_info("%s: quirk: this driver and your chipset may not work together in overlay mode.\n", + dev->name); if (!saa7134_no_overlay) { - pr_info("%s: quirk: overlay " - "mode will be disabled.\n", + pr_info("%s: quirk: overlay mode will be disabled.\n", dev->name); saa7134_no_overlay = 1; } else { - pr_info("%s: quirk: overlay " - "mode will be forced. Use this" - " option at your own risk.\n", + pr_info("%s: quirk: overlay mode will be forced. Use this option at your own risk.\n", dev->name); } } @@ -1106,10 +1101,10 @@ static int saa7134_initdev(struct pci_dev *pci_dev, /* print pci info */ dev->pci_rev = pci_dev->revision; pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); - pr_info("%s: found at %s, rev: %d, irq: %d, " - "latency: %d, mmio: 0x%llx\n", dev->name, - pci_name(pci_dev), dev->pci_rev, pci_dev->irq, - dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0)); + pr_info("%s: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, + (unsigned long long)pci_resource_start(pci_dev, 0)); pci_set_master(pci_dev); err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)); if (err) { diff --git a/drivers/media/pci/saa7134/saa7134-dvb.c b/drivers/media/pci/saa7134/saa7134-dvb.c index 59a4b5f7724e..598b8bbfe726 100644 --- a/drivers/media/pci/saa7134/saa7134-dvb.c +++ b/drivers/media/pci/saa7134/saa7134-dvb.c @@ -1449,8 +1449,8 @@ static int dvb_init(struct saa7134_dev *dev) if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { - pr_warn("%s: Medion Quadro, no tda826x " - "found !\n", __func__); + pr_warn("%s: Medion Quadro, no tda826x found !\n", + __func__); goto detach_frontend; } if (dev_id != 0x08) { @@ -1458,8 +1458,8 @@ static int dvb_init(struct saa7134_dev *dev) fe->ops.i2c_gate_ctrl(fe, 1); if (dvb_attach(isl6405_attach, fe, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - pr_warn("%s: Medion Quadro, no ISL6405 " - "found !\n", __func__); + pr_warn("%s: Medion Quadro, no ISL6405 found !\n", + __func__); goto detach_frontend; } if (dev_id == 0x07) { @@ -1629,8 +1629,8 @@ static int dvb_init(struct saa7134_dev *dev) struct dvb_frontend *fe; if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { - pr_warn("%s: MD7134 DVB-S, no SD1878 " - "found !\n", __func__); + pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n", + __func__); goto detach_frontend; } /* we need to open the i2c gate (we know it exists) */ @@ -1638,8 +1638,8 @@ static int dvb_init(struct saa7134_dev *dev) fe->ops.i2c_gate_ctrl(fe, 1); if (dvb_attach(isl6405_attach, fe, &dev->i2c_adap, 0x08, 0, 0) == NULL) { - pr_warn("%s: MD7134 DVB-S, no ISL6405 " - "found !\n", __func__); + pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n", + __func__); goto detach_frontend; } fe->ops.i2c_gate_ctrl(fe, 0); @@ -1670,14 +1670,14 @@ static int dvb_init(struct saa7134_dev *dev) if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { - pr_warn("%s: Asus Tiger 3in1, no " - "tda826x found!\n", __func__); + pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n", + __func__); goto detach_frontend; } if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, &dev->i2c_adap, 0, 0) == NULL) { - pr_warn("%s: Asus Tiger 3in1, no lnbp21" - " found!\n", __func__); + pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n", + __func__); goto detach_frontend; } } @@ -1695,14 +1695,14 @@ static int dvb_init(struct saa7134_dev *dev) if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { - pr_warn("%s: Asus My Cinema PS3-100, no " - "tda826x found!\n", __func__); + pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n", + __func__); goto detach_frontend; } if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, &dev->i2c_adap, 0, 0) == NULL) { - pr_warn("%s: Asus My Cinema PS3-100, no lnbp21" - " found!\n", __func__); + pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n", + __func__); goto detach_frontend; } } diff --git a/drivers/media/pci/saa7134/saa7134-input.c b/drivers/media/pci/saa7134/saa7134-input.c index eff52bbbfd66..823b75ed47e1 100644 --- a/drivers/media/pci/saa7134/saa7134-input.c +++ b/drivers/media/pci/saa7134/saa7134-input.c @@ -123,8 +123,7 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol, struct saa7134_dev *dev = ir->c->adapter->algo_data; if (dev == NULL) { - ir_dbg(ir, "get_key_flydvb_trio: " - "ir->c->adapter->algo_data is NULL!\n"); + ir_dbg(ir, "get_key_flydvb_trio: ir->c->adapter->algo_data is NULL!\n"); return -EIO; } @@ -150,8 +149,8 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol, msleep(10); continue; } - ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)" - "failed %dx\n", attempt); + ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)failed %dx\n", + attempt); return -EIO; } if (1 != i2c_master_recv(ir->c, &b, 1)) { @@ -174,8 +173,7 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, enum rc_type *protocol /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ struct saa7134_dev *dev = ir->c->adapter->algo_data; if (dev == NULL) { - ir_dbg(ir, "get_key_msi_tvanywhere_plus: " - "ir->c->adapter->algo_data is NULL!\n"); + ir_dbg(ir, "get_key_msi_tvanywhere_plus: ir->c->adapter->algo_data is NULL!\n"); return -EIO; } @@ -223,8 +221,7 @@ static int get_key_kworld_pc150u(struct IR_i2c *ir, enum rc_type *protocol, /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ struct saa7134_dev *dev = ir->c->adapter->algo_data; if (dev == NULL) { - ir_dbg(ir, "get_key_kworld_pc150u: " - "ir->c->adapter->algo_data is NULL!\n"); + ir_dbg(ir, "get_key_kworld_pc150u: ir->c->adapter->algo_data is NULL!\n"); return -EIO; } diff --git a/drivers/media/pci/saa7164/saa7164-buffer.c b/drivers/media/pci/saa7164/saa7164-buffer.c index f30758e24f5d..62c34504199d 100644 --- a/drivers/media/pci/saa7164/saa7164-buffer.c +++ b/drivers/media/pci/saa7164/saa7164-buffer.c @@ -218,8 +218,7 @@ int saa7164_buffer_activate(struct saa7164_buffer *buf, int i) saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), buf->pt_dma); saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0); - dprintk(DBGLVL_BUF, " buf[%d] offset 0x%llx (0x%x) " - "buf 0x%llx/%llx (0x%x/%x) nr=%d\n", + dprintk(DBGLVL_BUF, " buf[%d] offset 0x%llx (0x%x) buf 0x%llx/%llx (0x%x/%x) nr=%d\n", buf->idx, (u64)port->bufoffset + (i * sizeof(u32)), saa7164_readl(port->bufoffset + (sizeof(u32) * i)), diff --git a/drivers/media/pci/saa7164/saa7164-bus.c b/drivers/media/pci/saa7164/saa7164-bus.c index a18fe5d47238..e305c02f9dc9 100644 --- a/drivers/media/pci/saa7164/saa7164-bus.c +++ b/drivers/media/pci/saa7164/saa7164-bus.c @@ -427,8 +427,8 @@ int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp; if (bytes_to_read > write_distance) { - printk(KERN_ERR "%s() Invalid bus state, missing msg " - "or mangled ring, faulty H/W / bad code?\n", __func__); + printk(KERN_ERR "%s() Invalid bus state, missing msg or mangled ring, faulty H/W / bad code?\n", + __func__); ret = SAA_ERR_INVALID_COMMAND; goto out; } diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c index c2b738227f58..15a98c638c55 100644 --- a/drivers/media/pci/saa7164/saa7164-cards.c +++ b/drivers/media/pci/saa7164/saa7164-cards.c @@ -726,8 +726,8 @@ void saa7164_card_list(struct saa7164_dev *dev) dev->name, dev->name, dev->name, dev->name); } - printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod " - "option:\n", dev->name); + printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n", + dev->name); for (i = 0; i < saa7164_bcount; i++) printk(KERN_ERR "%s: card=%d -> %s\n", diff --git a/drivers/media/pci/saa7164/saa7164-cmd.c b/drivers/media/pci/saa7164/saa7164-cmd.c index 3285c37b4583..45951b3cc251 100644 --- a/drivers/media/pci/saa7164/saa7164-cmd.c +++ b/drivers/media/pci/saa7164/saa7164-cmd.c @@ -301,8 +301,8 @@ static int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno) else saa7164_cmd_timeout_seqno(dev, seqno); - dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d " - "(signalled=%d)\n", __func__, seqno, r, + dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d (signalled=%d)\n", + __func__, seqno, r, dev->cmds[seqno].signalled); } else ret = SAA_OK; @@ -353,8 +353,8 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command, int ret; int safety = 0; - dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, " - "sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id, + dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, sel = 0x%x)\n", + __func__, saa7164_unitid_name(dev, id), id, command, controlselector); if ((size == 0) || (buf == NULL)) { @@ -452,9 +452,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command, if (presponse_t->seqno != pcommand_t->seqno) { dprintk(DBGLVL_CMD, - "wrong event: seqno = %d, " - "expected seqno = %d, " - "will dequeue regardless\n", + "wrong event: seqno = %d, expected seqno = %d, will dequeue regardless\n", presponse_t->seqno, pcommand_t->seqno); ret = saa7164_cmd_dequeue(dev); diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index 8bbd092fbe1d..03a1511a92be 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -710,9 +710,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id) } else { /* Find the function */ dprintk(DBGLVL_IRQ, - "%s() unhandled interrupt " - "reg 0x%x bit 0x%x " - "intid = 0x%x\n", + "%s() unhandled interrupt reg 0x%x bit 0x%x intid = 0x%x\n", __func__, i, bit, intid); } } @@ -767,13 +765,11 @@ void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr) { int i; - dprintk(1, "--------------------> " - "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + dprintk(1, "--------------------> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); for (i = 0; i < 0x100; i += 16) - dprintk(1, "region0[0x%08x] = " - "%02x %02x %02x %02x %02x %02x %02x %02x" - " %02x %02x %02x %02x %02x %02x %02x %02x\n", i, + dprintk(1, "region0[0x%08x] = %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + i, (u8)saa7164_readb(addr + i + 0), (u8)saa7164_readb(addr + i + 1), (u8)saa7164_readb(addr + i + 2), @@ -825,8 +821,7 @@ static void saa7164_dump_hwdesc(struct saa7164_dev *dev) static void saa7164_dump_intfdesc(struct saa7164_dev *dev) { - dprintk(1, "@0x%p intfdesc " - "sizeof(struct tmComResInterfaceDescr) = %d bytes\n", + dprintk(1, "@0x%p intfdesc sizeof(struct tmComResInterfaceDescr) = %d bytes\n", &dev->intfdesc, (u32)sizeof(struct tmComResInterfaceDescr)); dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength); @@ -1011,8 +1006,7 @@ static int saa7164_dev_setup(struct saa7164_dev *dev) saa7164_port_init(dev, SAA7164_PORT_VBI2); if (get_resources(dev) < 0) { - printk(KERN_ERR "CORE %s No more PCIe resources for " - "subsystem: %04x:%04x\n", + printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n", dev->name, dev->pci->subsystem_vendor, dev->pci->subsystem_device); @@ -1204,8 +1198,8 @@ static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev) err = pci_enable_msi(pci_dev); if (err) { - printk(KERN_ERR "%s() Failed to enable MSI interrupt." - " Falling back to a shared IRQ\n", __func__); + printk(KERN_ERR "%s() Failed to enable MSI interrupt. Falling back to a shared IRQ\n", + __func__); return false; } @@ -1215,8 +1209,8 @@ static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev) if (err) { /* fall back to legacy interrupt */ - printk(KERN_ERR "%s() Failed to get an MSI interrupt." - " Falling back to a shared IRQ\n", __func__); + printk(KERN_ERR "%s() Failed to get an MSI interrupt. Falling back to a shared IRQ\n", + __func__); pci_disable_msi(pci_dev); return false; } @@ -1256,8 +1250,8 @@ static int saa7164_initdev(struct pci_dev *pci_dev, /* print pci info */ dev->pci_rev = pci_dev->revision; pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); - printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " - "latency: %d, mmio: 0x%llx\n", dev->name, + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n", + dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, dev->pci_lat, (unsigned long long)pci_resource_start(pci_dev, 0)); @@ -1307,8 +1301,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev, err = saa7164_downloadfirmware(dev); if (err < 0) { printk(KERN_ERR - "Failed to boot firmware, no features " - "registered\n"); + "Failed to boot firmware, no features registered\n"); goto fail_fw; } @@ -1327,8 +1320,7 @@ static int saa7164_initdev(struct pci_dev *pci_dev, */ version = 0; if (saa7164_api_get_fw_version(dev, &version) == SAA_OK) - dprintk(1, "Bus is operating correctly using " - "version %d.%d.%d.%d (0x%x)\n", + dprintk(1, "Bus is operating correctly using version %d.%d.%d.%d (0x%x)\n", (version & 0x0000fc00) >> 10, (version & 0x000003e0) >> 5, (version & 0x0000001f), @@ -1356,45 +1348,43 @@ static int saa7164_initdev(struct pci_dev *pci_dev, /* Begin to create the video sub-systems and register funcs */ if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) { if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS1]) < 0) { - printk(KERN_ERR "%s() Failed to register " - "dvb adapters on porta\n", + printk(KERN_ERR "%s() Failed to register dvb adapters on porta\n", __func__); } } if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) { if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS2]) < 0) { - printk(KERN_ERR"%s() Failed to register " - "dvb adapters on portb\n", + printk(KERN_ERR"%s() Failed to register dvb adapters on portb\n", __func__); } } if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER) { if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC1]) < 0) { - printk(KERN_ERR"%s() Failed to register " - "mpeg encoder\n", __func__); + printk(KERN_ERR"%s() Failed to register mpeg encoder\n", + __func__); } } if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER) { if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC2]) < 0) { - printk(KERN_ERR"%s() Failed to register " - "mpeg encoder\n", __func__); + printk(KERN_ERR"%s() Failed to register mpeg encoder\n", + __func__); } } if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI) { if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI1]) < 0) { - printk(KERN_ERR"%s() Failed to register " - "vbi device\n", __func__); + printk(KERN_ERR"%s() Failed to register vbi device\n", + __func__); } } if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI) { if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI2]) < 0) { - printk(KERN_ERR"%s() Failed to register " - "vbi device\n", __func__); + printk(KERN_ERR"%s() Failed to register vbi device\n", + __func__); } } saa7164_api_set_debug(dev, fw_debug); @@ -1404,15 +1394,15 @@ static int saa7164_initdev(struct pci_dev *pci_dev, "saa7164 debug"); if (IS_ERR(dev->kthread)) { dev->kthread = NULL; - printk(KERN_ERR "%s() Failed to create " - "debug kernel thread\n", __func__); + printk(KERN_ERR "%s() Failed to create debug kernel thread\n", + __func__); } } } /* != BOARD_UNKNOWN */ else - printk(KERN_ERR "%s() Unsupported board detected, " - "registering without firmware\n", __func__); + printk(KERN_ERR "%s() Unsupported board detected, registering without firmware\n", + __func__); dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug); dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs); diff --git a/drivers/media/pci/saa7164/saa7164-dvb.c b/drivers/media/pci/saa7164/saa7164-dvb.c index e9a783b71b45..cd3eeda5250b 100644 --- a/drivers/media/pci/saa7164/saa7164-dvb.c +++ b/drivers/media/pci/saa7164/saa7164-dvb.c @@ -244,8 +244,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port) /* Stop the hardware, regardless */ result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { - printk(KERN_ERR "%s() acquire/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; goto out; @@ -261,8 +261,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port) /* Stop the hardware, regardless */ result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { - printk(KERN_ERR "%s() pause/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; @@ -279,8 +279,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port) /* Stop the hardware, regardless */ result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { - printk(KERN_ERR "%s() run/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; @@ -357,8 +357,7 @@ static int dvb_register(struct saa7164_port *port) /* Sanity check that the PCI configuration space is active */ if (port->hwcfg.BARLocation == 0) { result = -ENOMEM; - printk(KERN_ERR "%s: dvb_register_adapter failed " - "(errno = %d), NO PCI configuration\n", + printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), NO PCI configuration\n", DRIVER_NAME, result); goto fail_adapter; } @@ -386,8 +385,7 @@ static int dvb_register(struct saa7164_port *port) if (!buf) { result = -ENOMEM; - printk(KERN_ERR "%s: dvb_register_adapter failed " - "(errno = %d), unable to allocate buffers\n", + printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), unable to allocate buffers\n", DRIVER_NAME, result); goto fail_adapter; } @@ -401,8 +399,8 @@ static int dvb_register(struct saa7164_port *port) result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE, &dev->pci->dev, adapter_nr); if (result < 0) { - printk(KERN_ERR "%s: dvb_register_adapter failed " - "(errno = %d)\n", DRIVER_NAME, result); + printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d)\n", + DRIVER_NAME, result); goto fail_adapter; } dvb->adapter.priv = port; @@ -410,8 +408,8 @@ static int dvb_register(struct saa7164_port *port) /* register frontend */ result = dvb_register_frontend(&dvb->adapter, dvb->frontend); if (result < 0) { - printk(KERN_ERR "%s: dvb_register_frontend failed " - "(errno = %d)\n", DRIVER_NAME, result); + printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n", + DRIVER_NAME, result); goto fail_frontend; } @@ -444,16 +442,16 @@ static int dvb_register(struct saa7164_port *port) dvb->fe_hw.source = DMX_FRONTEND_0; result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); if (result < 0) { - printk(KERN_ERR "%s: add_frontend failed " - "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result); + printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", + DRIVER_NAME, result); goto fail_fe_hw; } dvb->fe_mem.source = DMX_MEMORY_FE; result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); if (result < 0) { - printk(KERN_ERR "%s: add_frontend failed " - "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result); + printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", + DRIVER_NAME, result); goto fail_fe_mem; } diff --git a/drivers/media/pci/saa7164/saa7164-encoder.c b/drivers/media/pci/saa7164/saa7164-encoder.c index 32a353d162e7..68124ce7ebc3 100644 --- a/drivers/media/pci/saa7164/saa7164-encoder.c +++ b/drivers/media/pci/saa7164/saa7164-encoder.c @@ -157,8 +157,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port) params->pitch); if (!buf) { - printk(KERN_ERR "%s() failed " - "(errno = %d), unable to allocate buffer\n", + printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n", __func__, result); result = -ENOMEM; goto failed; @@ -681,8 +680,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port) /* Stop the hardware, regardless */ result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { - printk(KERN_ERR "%s() acquire/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; goto out; @@ -698,8 +697,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port) /* Stop the hardware, regardless */ result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { - printk(KERN_ERR "%s() pause/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; @@ -716,8 +715,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port) /* Stop the hardware, regardless */ result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { - printk(KERN_ERR "%s() run/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; @@ -1026,8 +1025,7 @@ int saa7164_encoder_register(struct saa7164_port *port) /* Sanity check that the PCI configuration space is active */ if (port->hwcfg.BARLocation == 0) { - printk(KERN_ERR "%s() failed " - "(errno = %d), NO PCI configuration\n", + printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n", __func__, result); result = -ENOMEM; goto failed; diff --git a/drivers/media/pci/saa7164/saa7164-fw.c b/drivers/media/pci/saa7164/saa7164-fw.c index 269e0782c7b6..8568adfd7ece 100644 --- a/drivers/media/pci/saa7164/saa7164-fw.c +++ b/drivers/media/pci/saa7164/saa7164-fw.c @@ -421,8 +421,8 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev) ret = request_firmware(&fw, fwname, &dev->pci->dev); if (ret) { - printk(KERN_ERR "%s() Upload failed. " - "(file not found?)\n", __func__); + printk(KERN_ERR "%s() Upload failed. (file not found?)\n", + __func__); return -ENOMEM; } @@ -478,15 +478,13 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev) 0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK) == 0x00) && (version == 0x00)) { - dprintk(DBGLVL_FW, "BootLoader version in " - "rom %d.%d.%d.%d\n", + dprintk(DBGLVL_FW, "BootLoader version in rom %d.%d.%d.%d\n", (bootloaderversion & 0x0000fc00) >> 10, (bootloaderversion & 0x000003e0) >> 5, (bootloaderversion & 0x0000001f), (bootloaderversion & 0xffff0000) >> 16 ); - dprintk(DBGLVL_FW, "BootLoader version " - "in file %d.%d.%d.%d\n", + dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n", (boothdr->version & 0x0000fc00) >> 10, (boothdr->version & 0x000003e0) >> 5, (boothdr->version & 0x0000001f), diff --git a/drivers/media/pci/saa7164/saa7164-vbi.c b/drivers/media/pci/saa7164/saa7164-vbi.c index ee54491459a6..e5dcb81029d3 100644 --- a/drivers/media/pci/saa7164/saa7164-vbi.c +++ b/drivers/media/pci/saa7164/saa7164-vbi.c @@ -110,8 +110,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port) params->pitch); if (!buf) { - printk(KERN_ERR "%s() failed " - "(errno = %d), unable to allocate buffer\n", + printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n", __func__, result); result = -ENOMEM; goto failed; @@ -384,8 +383,8 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port) /* Stop the hardware, regardless */ result = saa7164_vbi_stop_port(port); if (result != SAA_OK) { - printk(KERN_ERR "%s() pause/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; @@ -403,8 +402,8 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port) result = saa7164_vbi_acquire_port(port); result = saa7164_vbi_stop_port(port); if (result != SAA_OK) { - printk(KERN_ERR "%s() run/forced stop transition " - "failed, res = 0x%x\n", __func__, result); + printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", + __func__, result); } ret = -EIO; @@ -728,8 +727,7 @@ int saa7164_vbi_register(struct saa7164_port *port) /* Sanity check that the PCI configuration space is active */ if (port->hwcfg.BARLocation == 0) { - printk(KERN_ERR "%s() failed " - "(errno = %d), NO PCI configuration\n", + printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n", __func__, result); result = -ENOMEM; goto failed; diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2.c b/drivers/media/pci/solo6x10/solo6x10-v4l2.c index b4be47969b6b..896bec6627aa 100644 --- a/drivers/media/pci/solo6x10/solo6x10-v4l2.c +++ b/drivers/media/pci/solo6x10/solo6x10-v4l2.c @@ -702,8 +702,8 @@ int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr) snprintf(solo_dev->vfd->name, sizeof(solo_dev->vfd->name), "%s (%i)", SOLO6X10_NAME, solo_dev->vfd->num); - dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with " - "%d inputs (%d extended)\n", solo_dev->vfd->num, + dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with %d inputs (%d extended)\n", + solo_dev->vfd->num, solo_dev->nr_chans, solo_dev->nr_ext); return 0; diff --git a/drivers/media/pci/solo6x10/solo6x10.h b/drivers/media/pci/solo6x10/solo6x10.h index 5bd498735a66..3f8da5e8c430 100644 --- a/drivers/media/pci/solo6x10/solo6x10.h +++ b/drivers/media/pci/solo6x10/solo6x10.h @@ -284,7 +284,10 @@ static inline u32 solo_reg_read(struct solo_dev *solo_dev, int reg) static inline void solo_reg_write(struct solo_dev *solo_dev, int reg, u32 data) { + u16 val; + writel(data, solo_dev->reg_base + reg); + pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val); } static inline void solo_irq_on(struct solo_dev *dev, u32 mask) diff --git a/drivers/media/pci/ttpci/Makefile b/drivers/media/pci/ttpci/Makefile index 49f71b1eaf14..3cf617737f7c 100644 --- a/drivers/media/pci/ttpci/Makefile +++ b/drivers/media/pci/ttpci/Makefile @@ -3,7 +3,7 @@ # and the AV7110 DVB device driver # -dvb-ttpci-objs := av7110_hw.o av7110_v4l.o av7110_av.o av7110_ca.o av7110.o av7110_ipack.o +dvb-ttpci-objs := av7110_hw.o av7110_v4l.o av7110_av.o av7110_ca.o av7110.o av7110_ipack.o dvb_filter.o ifdef CONFIG_DVB_AV7110_IR dvb-ttpci-objs += av7110_ir.o diff --git a/drivers/media/pci/ttpci/av7110.c b/drivers/media/pci/ttpci/av7110.c index 382caf200ba1..37e7e6684e3c 100644 --- a/drivers/media/pci/ttpci/av7110.c +++ b/drivers/media/pci/ttpci/av7110.c @@ -100,8 +100,7 @@ MODULE_PARM_DESC(adac,"audio DAC type: 0 TI, 1 CRYSTAL, 2 MSP (use if autodetect module_param(hw_sections, int, 0444); MODULE_PARM_DESC(hw_sections, "0 use software section filter, 1 use hardware"); module_param(rgb_on, int, 0444); -MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control" - " signal on SCART pin 16 to switch SCART video mode from CVBS to RGB"); +MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control signal on SCART pin 16 to switch SCART video mode from CVBS to RGB"); module_param(volume, int, 0444); MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)"); module_param(budgetpatch, int, 0444); @@ -833,8 +832,7 @@ static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter) ret = av7110_fw_request(av7110, buf, 20, &handle, 1); if (ret != 0 || handle >= 32) { - printk("dvb-ttpci: %s error buf %04x %04x %04x %04x " - "ret %d handle %04x\n", + printk(KERN_ERR "dvb-ttpci: %s error buf %04x %04x %04x %04x ret %d handle %04x\n", __func__, buf[0], buf[1], buf[2], buf[3], ret, handle); dvbdmxfilter->hw_handle = 0xffff; @@ -876,8 +874,7 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) buf[2] = handle; ret = av7110_fw_request(av7110, buf, 3, answ, 2); if (ret != 0 || answ[1] != handle) { - printk("dvb-ttpci: %s error cmd %04x %04x %04x ret %x " - "resp %04x %04x pid %d\n", + printk(KERN_ERR "dvb-ttpci: %s error cmd %04x %04x %04x ret %x resp %04x %04x pid %d\n", __func__, buf[0], buf[1], buf[2], ret, answ[0], answ[1], dvbdmxfilter->feed->pid); if (!ret) @@ -1532,15 +1529,12 @@ static int get_firmware(struct av7110* av7110) ret = request_firmware(&fw, "dvb-ttpci-01.fw", &av7110->dev->pci->dev); if (ret) { if (ret == -ENOENT) { - printk(KERN_ERR "dvb-ttpci: could not load firmware," - " file not found: dvb-ttpci-01.fw\n"); - printk(KERN_ERR "dvb-ttpci: usually this should be in " - "/usr/lib/hotplug/firmware or /lib/firmware\n"); - printk(KERN_ERR "dvb-ttpci: and can be downloaded from" - " https://linuxtv.org/download/dvb/firmware/\n"); + printk(KERN_ERR "dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw\n"); + printk(KERN_ERR "dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware\n"); + printk(KERN_ERR "dvb-ttpci: and can be downloaded from https://linuxtv.org/download/dvb/firmware/\n"); } else - printk(KERN_ERR "dvb-ttpci: cannot request firmware" - " (error %i)\n", ret); + printk(KERN_ERR "dvb-ttpci: cannot request firmware (error %i)\n", + ret); return -EINVAL; } @@ -2700,8 +2694,9 @@ static int av7110_attach(struct saa7146_dev* dev, goto err_stop_arm_9; if (FW_VERSION(av7110->arm_app)<0x2501) - printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. " - "System might be unstable!\n", FW_VERSION(av7110->arm_app)); + printk(KERN_WARNING + "dvb-ttpci: Warning, firmware version 0x%04x is too old. System might be unstable!\n", + FW_VERSION(av7110->arm_app)); thread = kthread_run(arm_thread, (void *) av7110, "arm_mon"); if (IS_ERR(thread)) { @@ -2930,9 +2925,7 @@ static struct saa7146_extension av7110_extension_driver = { static int __init av7110_init(void) { - int retval; - retval = saa7146_register_extension(&av7110_extension_driver); - return retval; + return saa7146_register_extension(&av7110_extension_driver); } @@ -2944,7 +2937,6 @@ static void __exit av7110_exit(void) module_init(av7110_init); module_exit(av7110_exit); -MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by " - "Siemens, Technotrend, Hauppauge"); +MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by Siemens, Technotrend, Hauppauge"); MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/pci/ttpci/av7110_hw.c b/drivers/media/pci/ttpci/av7110_hw.c index 0583d56ef5ef..520414cbe087 100644 --- a/drivers/media/pci/ttpci/av7110_hw.c +++ b/drivers/media/pci/ttpci/av7110_hw.c @@ -235,8 +235,7 @@ int av7110_bootarm(struct av7110 *av7110) iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4); if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) { - printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: " - "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n", + printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: %08x != %08x (check your BIOS 'Plug&Play OS' settings)\n", ret, 0x10325476); return -1; } @@ -262,8 +261,7 @@ int av7110_bootarm(struct av7110 *av7110) iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2); if (saa7146_wait_for_debi_done(av7110->dev, 1)) { - printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " - "saa7146_wait_for_debi_done() timed out\n"); + printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out\n"); return -ETIMEDOUT; } saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI); @@ -271,8 +269,7 @@ int av7110_bootarm(struct av7110 *av7110) dprintk(1, "load dram code\n"); if (load_dram(av7110, (u32 *)av7110->bin_root, av7110->size_root) < 0) { - printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " - "load_dram() failed\n"); + printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): load_dram() failed\n"); return -1; } @@ -283,8 +280,7 @@ int av7110_bootarm(struct av7110 *av7110) mwdebi(av7110, DEBISWAB, DPRAM_BASE, av7110->bin_dpram, av7110->size_dpram); if (saa7146_wait_for_debi_done(av7110->dev, 1)) { - printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " - "saa7146_wait_for_debi_done() timed out after loading DRAM\n"); + printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out after loading DRAM\n"); return -ETIMEDOUT; } saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI); diff --git a/drivers/media/pci/ttpci/budget-av.c b/drivers/media/pci/ttpci/budget-av.c index 6f0d0161970e..896c66d4b3ae 100644 --- a/drivers/media/pci/ttpci/budget-av.c +++ b/drivers/media/pci/ttpci/budget-av.c @@ -1636,5 +1636,4 @@ module_exit(budget_av_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called " - "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); diff --git a/drivers/media/pci/ttpci/budget-ci.c b/drivers/media/pci/ttpci/budget-ci.c index 7b27af4d9658..20ad93bf0f54 100644 --- a/drivers/media/pci/ttpci/budget-ci.c +++ b/drivers/media/pci/ttpci/budget-ci.c @@ -1586,6 +1586,4 @@ module_exit(budget_ci_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called " - "budget PCI DVB cards w/ CI-module produced by " - "Siemens, Technotrend, Hauppauge"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/ttpci/budget-patch.c b/drivers/media/pci/ttpci/budget-patch.c index 591dbdfa2a13..f152eda0123a 100644 --- a/drivers/media/pci/ttpci/budget-patch.c +++ b/drivers/media/pci/ttpci/budget-patch.c @@ -679,5 +679,4 @@ module_exit(budget_patch_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others"); -MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 " - "based so-called Budget Patch cards"); +MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 based so-called Budget Patch cards"); diff --git a/drivers/media/pci/ttpci/budget.c b/drivers/media/pci/ttpci/budget.c index fb8ede5a1531..3091b480ce22 100644 --- a/drivers/media/pci/ttpci/budget.c +++ b/drivers/media/pci/ttpci/budget.c @@ -897,5 +897,4 @@ module_exit(budget_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called " - "budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); +MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/ttpci/dvb_filter.c b/drivers/media/pci/ttpci/dvb_filter.c new file mode 100644 index 000000000000..b67127b67d4e --- /dev/null +++ b/drivers/media/pci/ttpci/dvb_filter.c @@ -0,0 +1,114 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include "dvb_filter.h" + +static u32 freq[4] = {480, 441, 320, 0}; + +static unsigned int ac3_bitrates[32] = + {32,40,48,56,64,80,96,112,128,160,192,224,256,320,384,448,512,576,640, + 0,0,0,0,0,0,0,0,0,0,0,0,0}; + +static u32 ac3_frames[3][32] = + {{64,80,96,112,128,160,192,224,256,320,384,448,512,640,768,896,1024, + 1152,1280,0,0,0,0,0,0,0,0,0,0,0,0,0}, + {69,87,104,121,139,174,208,243,278,348,417,487,557,696,835,975,1114, + 1253,1393,0,0,0,0,0,0,0,0,0,0,0,0,0}, + {96,120,144,168,192,240,288,336,384,480,576,672,768,960,1152,1344, + 1536,1728,1920,0,0,0,0,0,0,0,0,0,0,0,0,0}}; + +int dvb_filter_get_ac3info(u8 *mbuf, int count, struct dvb_audio_info *ai, int pr) +{ + u8 *headr; + int found = 0; + int c = 0; + u8 frame = 0; + int fr = 0; + + while ( !found && c < count){ + u8 *b = mbuf+c; + + if ( b[0] == 0x0b && b[1] == 0x77 ) + found = 1; + else { + c++; + } + } + + if (!found) return -1; + if (pr) + printk(KERN_DEBUG "Audiostream: AC3"); + + ai->off = c; + if (c+5 >= count) return -1; + + ai->layer = 0; // 0 for AC3 + headr = mbuf+c+2; + + frame = (headr[2]&0x3f); + ai->bit_rate = ac3_bitrates[frame >> 1]*1000; + + if (pr) + printk(KERN_CONT " BRate: %d kb/s", (int) ai->bit_rate/1000); + + ai->frequency = (headr[2] & 0xc0 ) >> 6; + fr = (headr[2] & 0xc0 ) >> 6; + ai->frequency = freq[fr]*100; + if (pr) + printk(KERN_CONT " Freq: %d Hz\n", (int) ai->frequency); + + ai->framesize = ac3_frames[fr][frame >> 1]; + if ((frame & 1) && (fr == 1)) ai->framesize++; + ai->framesize = ai->framesize << 1; + if (pr) + printk(KERN_DEBUG " Framesize %d\n", (int) ai->framesize); + + return 0; +} + +void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, unsigned short pid, + dvb_filter_pes2ts_cb_t *cb, void *priv) +{ + unsigned char *buf=p2ts->buf; + + buf[0]=0x47; + buf[1]=(pid>>8); + buf[2]=pid&0xff; + p2ts->cc=0; + p2ts->cb=cb; + p2ts->priv=priv; +} + +int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes, + int len, int payload_start) +{ + unsigned char *buf=p2ts->buf; + int ret=0, rest; + + //len=6+((pes[4]<<8)|pes[5]); + + if (payload_start) + buf[1]|=0x40; + else + buf[1]&=~0x40; + while (len>=184) { + buf[3]=0x10|((p2ts->cc++)&0x0f); + memcpy(buf+4, pes, 184); + if ((ret=p2ts->cb(p2ts->priv, buf))) + return ret; + len-=184; pes+=184; + buf[1]&=~0x40; + } + if (!len) + return 0; + buf[3]=0x30|((p2ts->cc++)&0x0f); + rest=183-len; + if (rest) { + buf[5]=0x00; + if (rest-1) + memset(buf+6, 0xff, rest-1); + } + buf[4]=rest; + memcpy(buf+5+rest, pes, len); + return p2ts->cb(p2ts->priv, buf); +} diff --git a/drivers/media/dvb-core/dvb_filter.h b/drivers/media/pci/ttpci/dvb_filter.h index 375e3be184b1..375e3be184b1 100644 --- a/drivers/media/dvb-core/dvb_filter.h +++ b/drivers/media/pci/ttpci/dvb_filter.h diff --git a/drivers/media/pci/ttpci/ttpci-eeprom.c b/drivers/media/pci/ttpci/ttpci-eeprom.c index 079ee098b7e3..9534f29c1ffd 100644 --- a/drivers/media/pci/ttpci/ttpci-eeprom.c +++ b/drivers/media/pci/ttpci/ttpci-eeprom.c @@ -171,5 +171,4 @@ EXPORT_SYMBOL(ttpci_eeprom_parse_mac); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others"); -MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards " - "made by Siemens, Technotrend, Hauppauge"); +MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards made by Siemens, Technotrend, Hauppauge"); diff --git a/drivers/media/pci/tw5864/tw5864-reg.h b/drivers/media/pci/tw5864/tw5864-reg.h index 92a1b077ef8a..30ac14210e91 100644 --- a/drivers/media/pci/tw5864/tw5864-reg.h +++ b/drivers/media/pci/tw5864/tw5864-reg.h @@ -1879,6 +1879,14 @@ #define TW5864_INDIR_IN_PIC_HEIGHT(channel) (0x201 + 4 * channel) #define TW5864_INDIR_OUT_PIC_WIDTH(channel) (0x202 + 4 * channel) #define TW5864_INDIR_OUT_PIC_HEIGHT(channel) (0x203 + 4 * channel) + +/* Some registers skipped */ + +#define TW5864_INDIR_CROP_ETC 0x260 +/* Define controls in register TW5864_INDIR_CROP_ETC */ +/* Enable cropping from 720 to 704 */ +#define TW5864_INDIR_CROP_ETC_CROP_EN 0x4 + /* * Interrupt status register from the front-end. Write "1" to each bit to clear * the interrupt diff --git a/drivers/media/pci/tw5864/tw5864-video.c b/drivers/media/pci/tw5864/tw5864-video.c index 652a059b2e0a..9421216bb942 100644 --- a/drivers/media/pci/tw5864/tw5864-video.c +++ b/drivers/media/pci/tw5864/tw5864-video.c @@ -330,6 +330,15 @@ static int tw5864_enable_input(struct tw5864_input *input) tw_indir_writeb(TW5864_INDIR_OUT_PIC_WIDTH(nr), input->width / 4); tw_indir_writeb(TW5864_INDIR_OUT_PIC_HEIGHT(nr), input->height / 4); + /* + * Crop width from 720 to 704. + * Above register settings need value 720 involved. + */ + input->width = 704; + tw_indir_writeb(TW5864_INDIR_CROP_ETC, + tw_indir_readb(TW5864_INDIR_CROP_ETC) | + TW5864_INDIR_CROP_ETC_CROP_EN); + tw_writel(TW5864_DSP_PIC_MAX_MB, ((input->width / 16) << 8) | (input->height / 16)); @@ -532,7 +541,7 @@ static int tw5864_fmt_vid_cap(struct file *file, void *priv, { struct tw5864_input *input = video_drvdata(file); - f->fmt.pix.width = 720; + f->fmt.pix.width = 704; switch (input->std) { default: WARN_ON_ONCE(1); @@ -738,7 +747,7 @@ static int tw5864_enum_framesizes(struct file *file, void *priv, return -EINVAL; fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; - fsize->discrete.width = 720; + fsize->discrete.width = 704; fsize->discrete.height = input->std == STD_NTSC ? 480 : 576; return 0; diff --git a/drivers/media/pci/tw68/tw68-video.c b/drivers/media/pci/tw68/tw68-video.c index a45e02367321..58c4dd75bfa1 100644 --- a/drivers/media/pci/tw68/tw68-video.c +++ b/drivers/media/pci/tw68/tw68-video.c @@ -279,9 +279,8 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width, height /= 2; /* we must set for 1-frame */ pr_debug("%s: width=%d, height=%d, both=%d\n" - " tvnorm h_delay=%d, h_start=%d, h_stop=%d, " - "v_delay=%d, v_start=%d, v_stop=%d\n" , __func__, - width, height, V4L2_FIELD_HAS_BOTH(field), + " tvnorm h_delay=%d, h_start=%d, h_stop=%d, v_delay=%d, v_start=%d, v_stop=%d\n", + __func__, width, height, V4L2_FIELD_HAS_BOTH(field), norm->h_delay, norm->h_start, norm->h_stop, norm->v_delay, norm->video_v_start, norm->video_v_stop); @@ -309,16 +308,15 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width, V4L2_FIELD_HAS_TOP(field) ? "T" : "", V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "", v4l2_norm_to_name(dev->tvnorm->id)); - pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; " - "vactive=%d, vdelay=%d, vscale=%d\n", __func__, + pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; vactive=%d, vdelay=%d, vscale=%d\n", + __func__, hactive, hdelay, hscale, vactive, vdelay, vscale); comb = ((vdelay & 0x300) >> 2) | ((vactive & 0x300) >> 4) | ((hdelay & 0x300) >> 6) | ((hactive & 0x300) >> 8); - pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, " - "VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n", + pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n", __func__, comb, vdelay, vactive, hdelay, hactive); tw_writeb(TW68_CROP_HI, comb); tw_writeb(TW68_VDELAY_LO, vdelay & 0xff); @@ -327,8 +325,8 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width, tw_writeb(TW68_HACTIVE_LO, hactive & 0xff); comb = ((vscale & 0xf00) >> 4) | ((hscale & 0xf00) >> 8); - pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, " - "HSCALE_LO=%02x\n", __func__, comb, vscale, hscale); + pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, HSCALE_LO=%02x\n", + __func__, comb, vscale, hscale); tw_writeb(TW68_SCALE_HI, comb); tw_writeb(TW68_VSCALE_LO, vscale); tw_writeb(TW68_HSCALE_LO, hscale); diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index ce4a96fccc43..3c5a0b6b23a9 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -93,7 +93,7 @@ config VIDEO_OMAP3_DEBUG config VIDEO_PXA27x tristate "PXA27x Quick Capture Interface driver" - depends on VIDEO_DEV && HAS_DMA + depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on PXA27x || COMPILE_TEST select VIDEOBUF2_DMA_SG select SG_SPLIT @@ -175,6 +175,23 @@ config VIDEO_MEDIATEK_VPU To compile this driver as a module, choose M here: the module will be called mtk-vpu. +config VIDEO_MEDIATEK_MDP + tristate "Mediatek MDP driver" + depends on MTK_IOMMU || COMPILE_TEST + depends on VIDEO_DEV && VIDEO_V4L2 + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_DMA + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + select VIDEO_MEDIATEK_VPU + default n + ---help--- + It is a v4l2 driver and present in Mediatek MT8173 SoCs. + The driver supports for scaling and color space conversion. + + To compile this driver as a module, choose M here: the + module will be called mtk-mdp. + config VIDEO_MEDIATEK_VCODEC tristate "Mediatek Video Codec driver" depends on MTK_IOMMU || COMPILE_TEST @@ -249,7 +266,7 @@ config VIDEO_MX2_EMMAPRP config VIDEO_SAMSUNG_EXYNOS_GSC tristate "Samsung Exynos G-Scaler driver" depends on VIDEO_DEV && VIDEO_V4L2 - depends on ARCH_EXYNOS5 || COMPILE_TEST + depends on ARCH_EXYNOS || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV @@ -290,6 +307,19 @@ config VIDEO_SH_VEU Support for the Video Engine Unit (VEU) on SuperH and SH-Mobile SoCs. +config VIDEO_RENESAS_FDP1 + tristate "Renesas Fine Display Processor" + depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA + depends on ARCH_SHMOBILE || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + This is a V4L2 driver for the Renesas Fine Display Processor + providing colour space conversion, and de-interlacing features. + + To compile this driver as a module, choose M here: the module + will be called rcar_fdp1. + config VIDEO_RENESAS_JPU tristate "Renesas JPEG Processing Unit" depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 40b18d12726e..5b3cb271d2b8 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o obj-$(CONFIG_SOC_CAMERA) += soc_camera/ obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o +obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/ @@ -66,3 +67,5 @@ ccflags-y += -I$(srctree)/drivers/media/i2c obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/ obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec/ + +obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp/ diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c index ccfe13b7d3f8..8e25d3f56438 100644 --- a/drivers/media/platform/atmel/atmel-isc.c +++ b/drivers/media/platform/atmel/atmel-isc.c @@ -617,7 +617,13 @@ static void isc_buffer_queue(struct vb2_buffer *vb) unsigned long flags; spin_lock_irqsave(&isc->dma_queue_lock, flags); - list_add_tail(&buf->list, &isc->dma_queue); + if (!isc->cur_frm && list_empty(&isc->dma_queue) && + vb2_is_streaming(vb->vb2_queue)) { + isc->cur_frm = buf; + isc_start_dma(isc->regmap, isc->cur_frm, + isc->current_fmt->reg_dctrl_dview); + } else + list_add_tail(&buf->list, &isc->dma_queue); spin_unlock_irqrestore(&isc->dma_queue_lock, flags); } diff --git a/drivers/media/platform/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c index 8eb03397d736..2e6edc09b58f 100644 --- a/drivers/media/platform/blackfin/bfin_capture.c +++ b/drivers/media/platform/blackfin/bfin_capture.c @@ -169,7 +169,7 @@ static int bcap_init_sensor_formats(struct bcap_device *bcap_dev) if (!num_formats) return -ENXIO; - sf = kzalloc(num_formats * sizeof(*sf), GFP_KERNEL); + sf = kcalloc(num_formats, sizeof(*sf), GFP_KERNEL); if (!sf) return -ENOMEM; @@ -802,10 +802,8 @@ static int bcap_probe(struct platform_device *pdev) } bcap_dev = kzalloc(sizeof(*bcap_dev), GFP_KERNEL); - if (!bcap_dev) { - v4l2_err(pdev->dev.driver, "Unable to alloc bcap_dev\n"); + if (!bcap_dev) return -ENOMEM; - } bcap_dev->cfg = config; diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c index c39718a63e5e..9e6bdafa16f5 100644 --- a/drivers/media/platform/coda/coda-common.c +++ b/drivers/media/platform/coda/coda-common.c @@ -2295,8 +2295,13 @@ static int coda_probe(struct platform_device *pdev) pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); - return coda_firmware_request(dev); + ret = coda_firmware_request(dev); + if (ret) + goto err_alloc_workqueue; + return 0; +err_alloc_workqueue: + destroy_workqueue(dev->workqueue); err_v4l2_register: v4l2_device_unregister(&dev->v4l2_dev); return ret; diff --git a/drivers/media/platform/coda/coda-h264.c b/drivers/media/platform/coda/coda-h264.c index 456773af1f1d..09dfcca7cc50 100644 --- a/drivers/media/platform/coda/coda-h264.c +++ b/drivers/media/platform/coda/coda-h264.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/string.h> +#include <coda.h> static const u8 coda_filler_nal[14] = { 0x00, 0x00, 0x00, 0x01, 0x0c, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x80 }; diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c index c90b9a4f0c24..65c2973167c6 100644 --- a/drivers/media/platform/davinci/dm355_ccdc.c +++ b/drivers/media/platform/davinci/dm355_ccdc.c @@ -334,8 +334,8 @@ static int ccdc_set_params(void __user *params) x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); if (x) { - dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc" - "params, %d\n", x); + dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdcparams, %d\n", + x); return -EFAULT; } diff --git a/drivers/media/platform/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c index 6fba32bec974..c7523a7e0594 100644 --- a/drivers/media/platform/davinci/dm644x_ccdc.c +++ b/drivers/media/platform/davinci/dm644x_ccdc.c @@ -354,8 +354,8 @@ static int ccdc_set_params(void __user *params) x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); if (x) { - dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying" - "ccdc params, %d\n", x); + dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copyingccdc params, %d\n", + x); return -EFAULT; } diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c index 9a6c2cc38acb..8c8cbeb7d90f 100644 --- a/drivers/media/platform/davinci/vpbe.c +++ b/drivers/media/platform/davinci/vpbe.c @@ -107,7 +107,7 @@ static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg, static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev, struct v4l2_cropcap *cropcap) { - if (NULL == cropcap) + if (!cropcap) return -EINVAL; cropcap->bounds.left = 0; cropcap->bounds.top = 0; @@ -149,7 +149,7 @@ static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode, int curr_output = output_index; int i; - if (NULL == mode) + if (!mode) return -EINVAL; for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) { @@ -166,7 +166,7 @@ static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode, static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev, struct vpbe_enc_mode_info *mode_info) { - if (NULL == mode_info) + if (!mode_info) return -EINVAL; *mode_info = vpbe_dev->current_timings; @@ -227,10 +227,9 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) vpbe_current_encoder_info(vpbe_dev); struct vpbe_config *cfg = vpbe_dev->cfg; struct venc_platform_data *venc_device = vpbe_dev->venc_device; - u32 if_params; int enc_out_index; int sd_index; - int ret = 0; + int ret; if (index >= cfg->num_outputs) return -EINVAL; @@ -254,20 +253,19 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) sd_index = vpbe_find_encoder_sd_index(cfg, index); if (sd_index < 0) { ret = -EINVAL; - goto out; + goto unlock; } - if_params = cfg->outputs[index].if_params; - venc_device->setup_if_config(if_params); + ret = venc_device->setup_if_config(cfg->outputs[index].if_params); if (ret) - goto out; + goto unlock; } /* Set output at the encoder */ ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, s_routing, 0, enc_out_index, 0); if (ret) - goto out; + goto unlock; /* * It is assumed that venc or extenal encoder will set a default @@ -289,7 +287,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) vpbe_dev->current_sd_index = sd_index; vpbe_dev->current_out_index = index; } -out: +unlock: mutex_unlock(&vpbe_dev->lock); return ret; } @@ -297,19 +295,19 @@ out: static int vpbe_set_default_output(struct vpbe_device *vpbe_dev) { struct vpbe_config *cfg = vpbe_dev->cfg; - int ret = 0; int i; for (i = 0; i < cfg->num_outputs; i++) { if (!strcmp(def_output, cfg->outputs[i].output.name)) { - ret = vpbe_set_output(vpbe_dev, i); + int ret = vpbe_set_output(vpbe_dev, i); + if (!ret) vpbe_dev->current_out_index = i; return ret; } } - return ret; + return 0; } /** @@ -356,7 +354,7 @@ static int vpbe_s_dv_timings(struct vpbe_device *vpbe_dev, ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, s_dv_timings, dv_timings); - if (!ret && (vpbe_dev->amp != NULL)) { + if (!ret && vpbe_dev->amp) { /* Call amplifier subdevice */ ret = v4l2_subdev_call(vpbe_dev->amp, video, s_dv_timings, dv_timings); @@ -509,10 +507,9 @@ static int vpbe_set_mode(struct vpbe_device *vpbe_dev, struct v4l2_dv_timings dv_timings; struct osd_state *osd_device; int out_index = vpbe_dev->current_out_index; - int ret = 0; int i; - if ((NULL == mode_info) || (NULL == mode_info->name)) + if (!mode_info || !mode_info->name) return -EINVAL; for (i = 0; i < cfg->outputs[out_index].num_modes; i++) { @@ -536,7 +533,7 @@ static int vpbe_set_mode(struct vpbe_device *vpbe_dev, } /* Only custom timing should reach here */ - if (preset_mode == NULL) + if (!preset_mode) return -EINVAL; mutex_lock(&vpbe_dev->lock); @@ -549,8 +546,7 @@ static int vpbe_set_mode(struct vpbe_device *vpbe_dev, vpbe_dev->current_timings.upper_margin); mutex_unlock(&vpbe_dev->lock); - - return ret; + return 0; } static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev) @@ -570,9 +566,9 @@ static int platform_device_get(struct device *dev, void *data) struct platform_device *pdev = to_platform_device(dev); struct vpbe_device *vpbe_dev = data; - if (strstr(pdev->name, "vpbe-osd") != NULL) + if (strstr(pdev->name, "vpbe-osd")) vpbe_dev->osd_device = platform_get_drvdata(pdev); - if (strstr(pdev->name, "vpbe-venc") != NULL) + if (strstr(pdev->name, "vpbe-venc")) vpbe_dev->venc_device = dev_get_platdata(&pdev->dev); return 0; @@ -606,7 +602,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) * from the platform device by iteration of platform drivers and * matching with device name */ - if (NULL == vpbe_dev || NULL == dev) { + if (!vpbe_dev || !dev) { printk(KERN_ERR "Null device pointers.\n"); return -ENODEV; } @@ -652,7 +648,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev, vpbe_dev->cfg->venc.module_name); /* register venc sub device */ - if (vpbe_dev->venc == NULL) { + if (!vpbe_dev->venc) { v4l2_err(&vpbe_dev->v4l2_dev, "vpbe unable to init venc sub device\n"); ret = -ENODEV; @@ -660,8 +656,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) } /* initialize osd device */ osd_device = vpbe_dev->osd_device; - - if (NULL != osd_device->ops.initialize) { + if (osd_device->ops.initialize) { err = osd_device->ops.initialize(osd_device); if (err) { v4l2_err(&vpbe_dev->v4l2_dev, @@ -676,12 +671,10 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) * store venc sd index. */ num_encoders = vpbe_dev->cfg->num_ext_encoders + 1; - vpbe_dev->encoders = kmalloc( - sizeof(struct v4l2_subdev *)*num_encoders, - GFP_KERNEL); - if (NULL == vpbe_dev->encoders) { - v4l2_err(&vpbe_dev->v4l2_dev, - "unable to allocate memory for encoders sub devices"); + vpbe_dev->encoders = kmalloc_array(num_encoders, + sizeof(*vpbe_dev->encoders), + GFP_KERNEL); + if (!vpbe_dev->encoders) { ret = -ENOMEM; goto fail_dev_unregister; } @@ -705,19 +698,17 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) "v4l2 sub device %s registered\n", enc_info->module_name); else { - v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s" - " failed to register", + v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s failed to register", enc_info->module_name); ret = -ENODEV; goto fail_kfree_encoders; } } else - v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders" - " currently not supported"); + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders currently not supported"); } /* Add amplifier subdevice for dm365 */ if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) && - vpbe_dev->cfg->amp != NULL) { + vpbe_dev->cfg->amp) { amp_info = vpbe_dev->cfg->amp; if (amp_info->is_i2c) { vpbe_dev->amp = v4l2_i2c_new_subdev_board( @@ -735,8 +726,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) amp_info->module_name); } else { vpbe_dev->amp = NULL; - v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers" - " currently not supported"); + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers currently not supported"); } } else { vpbe_dev->amp = NULL; @@ -824,9 +814,8 @@ static int vpbe_probe(struct platform_device *pdev) { struct vpbe_device *vpbe_dev; struct vpbe_config *cfg; - int ret = -EINVAL; - if (pdev->dev.platform_data == NULL) { + if (!pdev->dev.platform_data) { v4l2_err(pdev->dev.driver, "No platform data\n"); return -ENODEV; } @@ -835,17 +824,14 @@ static int vpbe_probe(struct platform_device *pdev) if (!cfg->module_name[0] || !cfg->osd.module_name[0] || !cfg->venc.module_name[0]) { - v4l2_err(pdev->dev.driver, "vpbe display module names not" - " defined\n"); - return ret; + v4l2_err(pdev->dev.driver, "vpbe display module names not defined\n"); + return -EINVAL; } vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL); - if (vpbe_dev == NULL) { - v4l2_err(pdev->dev.driver, "Unable to allocate memory" - " for vpbe_device\n"); + if (!vpbe_dev) return -ENOMEM; - } + vpbe_dev->cfg = cfg; vpbe_dev->ops = vpbe_dev_ops; vpbe_dev->pdev = &pdev->dev; diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index 6efb2f1631c4..6c41782b3ba0 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -229,7 +229,7 @@ int vpfe_register_ccdc_device(struct ccdc_hw_device *dev) BUG_ON(!dev->hw_ops.getfid); mutex_lock(&ccdc_lock); - if (NULL == ccdc_cfg) { + if (!ccdc_cfg) { /* * TODO. Will this ever happen? if so, we need to fix it. * Proabably we need to add the request to a linked list and @@ -265,7 +265,7 @@ EXPORT_SYMBOL(vpfe_register_ccdc_device); */ void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) { - if (NULL == dev) { + if (!dev) { printk(KERN_ERR "invalid ccdc device ptr\n"); return; } @@ -281,7 +281,6 @@ void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev) mutex_lock(&ccdc_lock); ccdc_dev = NULL; mutex_unlock(&ccdc_lock); - return; } EXPORT_SYMBOL(vpfe_unregister_ccdc_device); @@ -384,7 +383,7 @@ static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, }; struct v4l2_mbus_framefmt *mbus_fmt = &fmt.format; struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix; - int i, ret = 0; + int i, ret; for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) { if (vpfe_standards[i].std_id & std_id) { @@ -453,7 +452,7 @@ static int vpfe_config_image_format(struct vpfe_device *vpfe_dev, static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) { - int ret = 0; + int ret; /* set first input of current subdevice as the current input */ vpfe_dev->current_input = 0; @@ -469,7 +468,7 @@ static int vpfe_initialize_device(struct vpfe_device *vpfe_dev) /* now open the ccdc device to initialize it */ mutex_lock(&ccdc_lock); - if (NULL == ccdc_dev) { + if (!ccdc_dev) { v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n"); ret = -ENODEV; goto unlock; @@ -511,12 +510,10 @@ static int vpfe_open(struct file *file) } /* Allocate memory for the file handle object */ - fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL); - if (NULL == fh) { - v4l2_err(&vpfe_dev->v4l2_dev, - "unable to allocate memory for file handle object\n"); + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) return -ENOMEM; - } + /* store pointer to fh in private_data member of file */ file->private_data = fh; fh->vpfe_dev = vpfe_dev; @@ -584,7 +581,7 @@ static irqreturn_t vpfe_isr(int irq, void *dev_id) goto clear_intr; /* only for 6446 this will be applicable */ - if (NULL != ccdc_dev->hw_ops.reset) + if (ccdc_dev->hw_ops.reset) ccdc_dev->hw_ops.reset(); if (field == V4L2_FIELD_NONE) { @@ -617,9 +614,8 @@ static irqreturn_t vpfe_isr(int irq, void *dev_id) * interleavely or separately in memory, reconfigure * the CCDC memory address */ - if (field == V4L2_FIELD_SEQ_TB) { + if (field == V4L2_FIELD_SEQ_TB) vpfe_schedule_bottom_field(vpfe_dev); - } goto clear_intr; } /* @@ -824,7 +820,7 @@ static const struct vpfe_pixel_format * int temp, found; vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat); - if (NULL == vpfe_pix_fmt) { + if (!vpfe_pix_fmt) { /* * use current pixel format in the vpfe device. We * will find this pix format in the table @@ -919,8 +915,7 @@ static const struct vpfe_pixel_format * else pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; - v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height =" - " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", + v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n", pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp, pixfmt->bytesperline, pixfmt->sizeimage); return vpfe_pix_fmt; @@ -967,7 +962,7 @@ static int vpfe_enum_fmt_vid_cap(struct file *file, void *priv, /* Fill in the information about format */ pix_fmt = vpfe_lookup_pix_format(pix); - if (NULL != pix_fmt) { + if (pix_fmt) { temp_index = fmt->index; *fmt = pix_fmt->fmtdesc; fmt->index = temp_index; @@ -981,7 +976,7 @@ static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, { struct vpfe_device *vpfe_dev = video_drvdata(file); const struct vpfe_pixel_format *pix_fmts; - int ret = 0; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n"); @@ -993,8 +988,7 @@ static int vpfe_s_fmt_vid_cap(struct file *file, void *priv, /* Check for valid frame format */ pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix); - - if (NULL == pix_fmts) + if (!pix_fmts) return -EINVAL; /* store the pixel format in the device object */ @@ -1020,7 +1014,7 @@ static int vpfe_try_fmt_vid_cap(struct file *file, void *priv, v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n"); pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix); - if (NULL == pix_fmts) + if (!pix_fmts) return -EINVAL; return 0; } @@ -1088,12 +1082,11 @@ static int vpfe_enum_input(struct file *file, void *priv, &subdev, &index, inp->index) < 0) { - v4l2_err(&vpfe_dev->v4l2_dev, "input information not found" - " for the subdev\n"); + v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n"); return -EINVAL; } sdinfo = &vpfe_dev->cfg->sub_devs[subdev]; - memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); + *inp = sdinfo->inputs[index]; return 0; } @@ -1114,8 +1107,8 @@ static int vpfe_s_input(struct file *file, void *priv, unsigned int index) struct vpfe_subdev_info *sdinfo; int subdev_index, inp_index; struct vpfe_route *route; - u32 input = 0, output = 0; - int ret = -EINVAL; + u32 input, output; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n"); @@ -1147,6 +1140,9 @@ static int vpfe_s_input(struct file *file, void *priv, unsigned int index) if (route && sdinfo->can_route) { input = route->input; output = route->output; + } else { + input = 0; + output = 0; } if (sd) @@ -1181,7 +1177,7 @@ static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id) { struct vpfe_device *vpfe_dev = video_drvdata(file); struct vpfe_subdev_info *sdinfo; - int ret = 0; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n"); @@ -1200,7 +1196,7 @@ static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id) { struct vpfe_device *vpfe_dev = video_drvdata(file); struct vpfe_subdev_info *sdinfo; - int ret = 0; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n"); @@ -1349,7 +1345,7 @@ static int vpfe_reqbufs(struct file *file, void *priv, { struct vpfe_device *vpfe_dev = video_drvdata(file); struct vpfe_fh *fh = file->private_data; - int ret = 0; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n"); @@ -1481,7 +1477,7 @@ static int vpfe_streamon(struct file *file, void *priv, struct vpfe_fh *fh = file->private_data; struct vpfe_subdev_info *sdinfo; unsigned long addr; - int ret = 0; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n"); @@ -1564,7 +1560,7 @@ static int vpfe_streamoff(struct file *file, void *priv, struct vpfe_device *vpfe_dev = video_drvdata(file); struct vpfe_fh *fh = file->private_data; struct vpfe_subdev_info *sdinfo; - int ret = 0; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n"); @@ -1650,7 +1646,7 @@ static int vpfe_s_selection(struct file *file, void *priv, { struct vpfe_device *vpfe_dev = video_drvdata(file); struct v4l2_rect rect = sel->r; - int ret = 0; + int ret; v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_selection\n"); @@ -1708,7 +1704,7 @@ static long vpfe_param_handler(struct file *file, void *priv, bool valid_prio, unsigned int cmd, void *param) { struct vpfe_device *vpfe_dev = video_drvdata(file); - int ret = 0; + int ret; v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n"); @@ -1821,7 +1817,7 @@ static int vpfe_probe(struct platform_device *pdev) struct vpfe_device *vpfe_dev; struct i2c_adapter *i2c_adap; struct video_device *vfd; - int ret = -ENOMEM, i, j; + int ret, i, j; int num_subdevs = 0; /* Get the pointer to the device object */ @@ -1830,12 +1826,12 @@ static int vpfe_probe(struct platform_device *pdev) if (!vpfe_dev) { v4l2_err(pdev->dev.driver, "Failed to allocate memory for vpfe_dev\n"); - return ret; + return -ENOMEM; } vpfe_dev->pdev = &pdev->dev; - if (NULL == pdev->dev.platform_data) { + if (!pdev->dev.platform_data) { v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n"); ret = -ENODEV; goto probe_free_dev_mem; @@ -1843,21 +1839,16 @@ static int vpfe_probe(struct platform_device *pdev) vpfe_cfg = pdev->dev.platform_data; vpfe_dev->cfg = vpfe_cfg; - if (NULL == vpfe_cfg->ccdc || - NULL == vpfe_cfg->card_name || - NULL == vpfe_cfg->sub_devs) { + if (!vpfe_cfg->ccdc || !vpfe_cfg->card_name || !vpfe_cfg->sub_devs) { v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n"); ret = -ENOENT; goto probe_free_dev_mem; } /* Allocate memory for ccdc configuration */ - ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL); - if (NULL == ccdc_cfg) { - v4l2_err(pdev->dev.driver, - "Memory allocation failed for ccdc_cfg\n"); + ccdc_cfg = kmalloc(sizeof(*ccdc_cfg), GFP_KERNEL); + if (!ccdc_cfg) goto probe_free_dev_mem; - } mutex_lock(&ccdc_lock); @@ -1940,11 +1931,10 @@ static int vpfe_probe(struct platform_device *pdev) video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev); i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id); num_subdevs = vpfe_cfg->num_subdevs; - vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs, - GFP_KERNEL); - if (NULL == vpfe_dev->sd) { - v4l2_err(&vpfe_dev->v4l2_dev, - "unable to allocate memory for subdevice pointers\n"); + vpfe_dev->sd = kmalloc_array(num_subdevs, + sizeof(*vpfe_dev->sd), + GFP_KERNEL); + if (!vpfe_dev->sd) { ret = -ENOMEM; goto probe_out_video_unregister; } diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c index 5104cc0ee40e..f791f5c402bf 100644 --- a/drivers/media/platform/davinci/vpif_capture.c +++ b/drivers/media/platform/davinci/vpif_capture.c @@ -291,10 +291,10 @@ static void vpif_stop_streaming(struct vb2_queue *vq) vb2_buffer_done(&common->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); } else { - if (common->cur_frm != NULL) + if (common->cur_frm) vb2_buffer_done(&common->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); - if (common->next_frm != NULL) + if (common->next_frm) vb2_buffer_done(&common->next_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); } @@ -375,7 +375,7 @@ static irqreturn_t vpif_channel_isr(int irq, void *dev_id) struct vpif_device *dev = &vpif_obj; struct common_obj *common; struct channel_obj *ch; - int channel_id = 0; + int channel_id; int fid = -1, i; channel_id = *(int *)(dev_id); @@ -648,7 +648,7 @@ static int vpif_input_to_subdev( vpif_dbg(2, debug, "vpif_input_to_subdev\n"); subdev_name = chan_cfg->inputs[input_index].subdev_name; - if (subdev_name == NULL) + if (!subdev_name) return -1; /* loop through the sub device list to get the sub device info */ @@ -731,7 +731,7 @@ static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id) { struct video_device *vdev = video_devdata(file); struct channel_obj *ch = video_get_drvdata(vdev); - int ret = 0; + int ret; vpif_dbg(2, debug, "vpif_querystd\n"); @@ -764,7 +764,7 @@ static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) vpif_dbg(2, debug, "vpif_g_std\n"); - if (config->chan_config[ch->channel_id].inputs == NULL) + if (!config->chan_config[ch->channel_id].inputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -794,7 +794,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id std_id) vpif_dbg(2, debug, "vpif_s_std\n"); - if (config->chan_config[ch->channel_id].inputs == NULL) + if (!config->chan_config[ch->channel_id].inputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -1050,7 +1050,7 @@ vpif_enum_dv_timings(struct file *file, void *priv, struct v4l2_input input; int ret; - if (config->chan_config[ch->channel_id].inputs == NULL) + if (!config->chan_config[ch->channel_id].inputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -1084,7 +1084,7 @@ vpif_query_dv_timings(struct file *file, void *priv, struct v4l2_input input; int ret; - if (config->chan_config[ch->channel_id].inputs == NULL) + if (!config->chan_config[ch->channel_id].inputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -1120,7 +1120,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, struct v4l2_input input; int ret; - if (config->chan_config[ch->channel_id].inputs == NULL) + if (!config->chan_config[ch->channel_id].inputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -1152,11 +1152,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, timings->bt.vfrontporch && (timings->bt.vbackporch || timings->bt.vsync))) { - vpif_dbg(2, debug, "Timings for width, height, " - "horizontal back porch, horizontal sync, " - "horizontal front porch, vertical back porch, " - "vertical sync and vertical back porch " - "must be defined\n"); + vpif_dbg(2, debug, "Timings for width, height, horizontal back porch, horizontal sync, horizontal front porch, vertical back porch, vertical sync and vertical back porch must be defined\n"); return -EINVAL; } @@ -1181,8 +1177,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, std_info->l11 = std_info->vsize - (bt->il_vfrontporch - 1); } else { - vpif_dbg(2, debug, "Required timing values for " - "interlaced BT format missing\n"); + vpif_dbg(2, debug, "Required timing values for interlaced BT format missing\n"); return -EINVAL; } } else { @@ -1218,7 +1213,7 @@ static int vpif_g_dv_timings(struct file *file, void *priv, struct vpif_capture_chan_config *chan_cfg; struct v4l2_input input; - if (config->chan_config[ch->channel_id].inputs == NULL) + if (!config->chan_config[ch->channel_id].inputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -1464,10 +1459,8 @@ static __init int vpif_probe(struct platform_device *pdev) vpif_obj.config = pdev->dev.platform_data; subdev_count = vpif_obj.config->subdev_count; - vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, - GFP_KERNEL); - if (vpif_obj.sd == NULL) { - vpif_err("unable to allocate memory for subdevice pointers\n"); + vpif_obj.sd = kcalloc(subdev_count, sizeof(*vpif_obj.sd), GFP_KERNEL); + if (!vpif_obj.sd) { err = -ENOMEM; goto vpif_unregister; } diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c index 75b27233ec2f..e5f18448dbf7 100644 --- a/drivers/media/platform/davinci/vpif_display.c +++ b/drivers/media/platform/davinci/vpif_display.c @@ -271,10 +271,10 @@ static void vpif_stop_streaming(struct vb2_queue *vq) vb2_buffer_done(&common->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); } else { - if (common->cur_frm != NULL) + if (common->cur_frm) vb2_buffer_done(&common->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); - if (common->next_frm != NULL) + if (common->next_frm) vb2_buffer_done(&common->next_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR); } @@ -301,7 +301,7 @@ static struct vb2_ops video_qops = { static void process_progressive_mode(struct common_obj *common) { - unsigned long addr = 0; + unsigned long addr; spin_lock(&common->irqlock); /* Get the next buffer from buffer queue */ @@ -363,7 +363,7 @@ static irqreturn_t vpif_channel_isr(int irq, void *dev_id) struct channel_obj *ch; struct common_obj *common; int fid = -1, i; - int channel_id = 0; + int channel_id; channel_id = *(int *)(dev_id); if (!vpif_intr_status(channel_id + 2)) @@ -686,7 +686,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id std_id) struct v4l2_output output; int ret; - if (config->chan_config[ch->channel_id].outputs == NULL) + if (!config->chan_config[ch->channel_id].outputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -732,7 +732,7 @@ static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std) struct vpif_display_chan_config *chan_cfg; struct v4l2_output output; - if (config->chan_config[ch->channel_id].outputs == NULL) + if (!config->chan_config[ch->channel_id].outputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -783,11 +783,11 @@ vpif_output_to_subdev(struct vpif_display_config *vpif_cfg, vpif_dbg(2, debug, "vpif_output_to_subdev\n"); - if (chan_cfg->outputs == NULL) + if (!chan_cfg->outputs) return -1; subdev_name = chan_cfg->outputs[index].subdev_name; - if (subdev_name == NULL) + if (!subdev_name) return -1; /* loop through the sub device list to get the sub device info */ @@ -833,7 +833,7 @@ static int vpif_set_output(struct vpif_display_config *vpif_cfg, } ch->output_idx = index; ch->sd = sd; - if (chan_cfg->outputs != NULL) + if (chan_cfg->outputs) /* update tvnorms from the sub device output info */ ch->video_dev.tvnorms = chan_cfg->outputs[index].output.std; return 0; @@ -885,7 +885,7 @@ vpif_enum_dv_timings(struct file *file, void *priv, struct v4l2_output output; int ret; - if (config->chan_config[ch->channel_id].outputs == NULL) + if (!config->chan_config[ch->channel_id].outputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -922,7 +922,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, struct v4l2_output output; int ret; - if (config->chan_config[ch->channel_id].outputs == NULL) + if (!config->chan_config[ch->channel_id].outputs) return -ENODATA; chan_cfg = &config->chan_config[ch->channel_id]; @@ -954,11 +954,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, timings->bt.vfrontporch && (timings->bt.vbackporch || timings->bt.vsync))) { - vpif_dbg(2, debug, "Timings for width, height, " - "horizontal back porch, horizontal sync, " - "horizontal front porch, vertical back porch, " - "vertical sync and vertical back porch " - "must be defined\n"); + vpif_dbg(2, debug, "Timings for width, height, horizontal back porch, horizontal sync, horizontal front porch, vertical back porch, vertical sync and vertical back porch must be defined\n"); return -EINVAL; } @@ -983,8 +979,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv, std_info->l11 = std_info->vsize - (bt->il_vfrontporch - 1); } else { - vpif_dbg(2, debug, "Required timing values for " - "interlaced BT format missing\n"); + vpif_dbg(2, debug, "Required timing values for interlaced BT format missing\n"); return -EINVAL; } } else { @@ -1021,7 +1016,7 @@ static int vpif_g_dv_timings(struct file *file, void *priv, struct video_obj *vid_ch = &ch->video; struct v4l2_output output; - if (config->chan_config[ch->channel_id].outputs == NULL) + if (!config->chan_config[ch->channel_id].outputs) goto error; chan_cfg = &config->chan_config[ch->channel_id]; @@ -1279,10 +1274,8 @@ static __init int vpif_probe(struct platform_device *pdev) vpif_obj.config = pdev->dev.platform_data; subdev_count = vpif_obj.config->subdev_count; subdevdata = vpif_obj.config->subdevinfo; - vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count, - GFP_KERNEL); - if (vpif_obj.sd == NULL) { - vpif_err("unable to allocate memory for subdevice pointers\n"); + vpif_obj.sd = kcalloc(subdev_count, sizeof(*vpif_obj.sd), GFP_KERNEL); + if (!vpif_obj.sd) { err = -ENOMEM; goto vpif_unregister; } diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c index fce86f17dffc..373b796132f2 100644 --- a/drivers/media/platform/davinci/vpss.c +++ b/drivers/media/platform/davinci/vpss.c @@ -261,8 +261,8 @@ static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en) shift = 6; break; default: - printk(KERN_ERR "dm355_enable_clock:" - " Invalid selector: %d\n", clock_sel); + printk(KERN_ERR "dm355_enable_clock: Invalid selector: %d\n", + clock_sel); return -EINVAL; } @@ -421,8 +421,7 @@ static int vpss_probe(struct platform_device *pdev) else if (!strcmp(platform_name, "dm644x_vpss")) oper_cfg.platform = DM644X; else { - dev_err(&pdev->dev, "vpss driver not supported on" - " this platform\n"); + dev_err(&pdev->dev, "vpss driver not supported on this platform\n"); return -ENODEV; } diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c index 787bd16c19e5..cbf75b6194b4 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.c +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -24,12 +24,11 @@ #include <linux/slab.h> #include <linux/clk.h> #include <linux/of.h> +#include <linux/of_device.h> #include <media/v4l2-ioctl.h> #include "gsc-core.h" -#define GSC_CLOCK_GATE_NAME "gscl" - static const struct gsc_fmt gsc_formats[] = { { .name = "RGB565", @@ -39,8 +38,8 @@ static const struct gsc_fmt gsc_formats[] = { .num_planes = 1, .num_comp = 1, }, { - .name = "XRGB-8-8-8-8, 32 bpp", - .pixelformat = V4L2_PIX_FMT_RGB32, + .name = "BGRX-8-8-8-8, 32 bpp", + .pixelformat = V4L2_PIX_FMT_BGR32, .depth = { 32 }, .color = GSC_RGB, .num_planes = 1, @@ -441,7 +440,7 @@ int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) v4l_bound_align_image(&pix_mp->width, min_w, max_w, mod_x, &pix_mp->height, min_h, max_h, mod_y, 0); if (tmp_w != pix_mp->width || tmp_h != pix_mp->height) - pr_info("Image size has been modified from %dx%d to %dx%d", + pr_debug("Image size has been modified from %dx%d to %dx%d\n", tmp_w, tmp_h, pix_mp->width, pix_mp->height); pix_mp->num_planes = fmt->num_planes; @@ -451,12 +450,25 @@ int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f) else /* SD */ pix_mp->colorspace = V4L2_COLORSPACE_SMPTE170M; - for (i = 0; i < pix_mp->num_planes; ++i) { - int bpl = (pix_mp->width * fmt->depth[i]) >> 3; - pix_mp->plane_fmt[i].bytesperline = bpl; - pix_mp->plane_fmt[i].sizeimage = bpl * pix_mp->height; + struct v4l2_plane_pix_format *plane_fmt = &pix_mp->plane_fmt[i]; + u32 bpl = plane_fmt->bytesperline; + + if (fmt->num_comp == 1 && /* Packed */ + (bpl == 0 || (bpl * 8 / fmt->depth[i]) < pix_mp->width)) + bpl = pix_mp->width * fmt->depth[i] / 8; + + if (fmt->num_comp > 1 && /* Planar */ + (bpl == 0 || bpl < pix_mp->width)) + bpl = pix_mp->width; + + if (i != 0 && fmt->num_comp == 3) + bpl /= 2; + plane_fmt->bytesperline = bpl; + plane_fmt->sizeimage = max(pix_mp->width * pix_mp->height * + fmt->depth[i] / 8, + plane_fmt->sizeimage); pr_debug("[%d]: bpl: %d, sizeimage: %d", i, bpl, pix_mp->plane_fmt[i].sizeimage); } @@ -964,7 +976,19 @@ static struct gsc_driverdata gsc_v_100_drvdata = { [3] = &gsc_v_100_variant, }, .num_entities = 4, - .lclk_frequency = 266000000UL, + .clk_names = { "gscl" }, + .num_clocks = 1, +}; + +static struct gsc_driverdata gsc_5433_drvdata = { + .variant = { + [0] = &gsc_v_100_variant, + [1] = &gsc_v_100_variant, + [2] = &gsc_v_100_variant, + }, + .num_entities = 3, + .clk_names = { "pclk", "aclk", "aclk_xiu", "aclk_gsclbend" }, + .num_clocks = 4, }; static const struct of_device_id exynos_gsc_match[] = { @@ -972,98 +996,22 @@ static const struct of_device_id exynos_gsc_match[] = { .compatible = "samsung,exynos5-gsc", .data = &gsc_v_100_drvdata, }, + { + .compatible = "samsung,exynos5433-gsc", + .data = &gsc_5433_drvdata, + }, {}, }; MODULE_DEVICE_TABLE(of, exynos_gsc_match); -static void *gsc_get_drv_data(struct platform_device *pdev) -{ - struct gsc_driverdata *driver_data = NULL; - const struct of_device_id *match; - - match = of_match_node(exynos_gsc_match, pdev->dev.of_node); - if (match) - driver_data = (struct gsc_driverdata *)match->data; - - return driver_data; -} - -static void gsc_clk_put(struct gsc_dev *gsc) -{ - if (!IS_ERR(gsc->clock)) - clk_unprepare(gsc->clock); -} - -static int gsc_clk_get(struct gsc_dev *gsc) -{ - int ret; - - dev_dbg(&gsc->pdev->dev, "gsc_clk_get Called\n"); - - gsc->clock = devm_clk_get(&gsc->pdev->dev, GSC_CLOCK_GATE_NAME); - if (IS_ERR(gsc->clock)) { - dev_err(&gsc->pdev->dev, "failed to get clock~~~: %s\n", - GSC_CLOCK_GATE_NAME); - return PTR_ERR(gsc->clock); - } - - ret = clk_prepare(gsc->clock); - if (ret < 0) { - dev_err(&gsc->pdev->dev, "clock prepare failed for clock: %s\n", - GSC_CLOCK_GATE_NAME); - gsc->clock = ERR_PTR(-EINVAL); - return ret; - } - - return 0; -} - -static int gsc_m2m_suspend(struct gsc_dev *gsc) -{ - unsigned long flags; - int timeout; - - spin_lock_irqsave(&gsc->slock, flags); - if (!gsc_m2m_pending(gsc)) { - spin_unlock_irqrestore(&gsc->slock, flags); - return 0; - } - clear_bit(ST_M2M_SUSPENDED, &gsc->state); - set_bit(ST_M2M_SUSPENDING, &gsc->state); - spin_unlock_irqrestore(&gsc->slock, flags); - - timeout = wait_event_timeout(gsc->irq_queue, - test_bit(ST_M2M_SUSPENDED, &gsc->state), - GSC_SHUTDOWN_TIMEOUT); - - clear_bit(ST_M2M_SUSPENDING, &gsc->state); - return timeout == 0 ? -EAGAIN : 0; -} - -static int gsc_m2m_resume(struct gsc_dev *gsc) -{ - struct gsc_ctx *ctx; - unsigned long flags; - - spin_lock_irqsave(&gsc->slock, flags); - /* Clear for full H/W setup in first run after resume */ - ctx = gsc->m2m.ctx; - gsc->m2m.ctx = NULL; - spin_unlock_irqrestore(&gsc->slock, flags); - - if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state)) - gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); - - return 0; -} - static int gsc_probe(struct platform_device *pdev) { struct gsc_dev *gsc; struct resource *res; - struct gsc_driverdata *drv_data = gsc_get_drv_data(pdev); struct device *dev = &pdev->dev; + const struct gsc_driverdata *drv_data = of_device_get_match_data(dev); int ret; + int i; gsc = devm_kzalloc(dev, sizeof(struct gsc_dev), GFP_KERNEL); if (!gsc) @@ -1079,13 +1027,13 @@ static int gsc_probe(struct platform_device *pdev) return -EINVAL; } + gsc->num_clocks = drv_data->num_clocks; gsc->variant = drv_data->variant[gsc->id]; gsc->pdev = pdev; init_waitqueue_head(&gsc->irq_queue); spin_lock_init(&gsc->slock); mutex_init(&gsc->lock); - gsc->clock = ERR_PTR(-EINVAL); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); gsc->regs = devm_ioremap_resource(dev, res); @@ -1098,9 +1046,25 @@ static int gsc_probe(struct platform_device *pdev) return -ENXIO; } - ret = gsc_clk_get(gsc); - if (ret) - return ret; + for (i = 0; i < gsc->num_clocks; i++) { + gsc->clock[i] = devm_clk_get(dev, drv_data->clk_names[i]); + if (IS_ERR(gsc->clock[i])) { + dev_err(dev, "failed to get clock: %s\n", + drv_data->clk_names[i]); + return PTR_ERR(gsc->clock[i]); + } + } + + for (i = 0; i < gsc->num_clocks; i++) { + ret = clk_prepare_enable(gsc->clock[i]); + if (ret) { + dev_err(dev, "clock prepare failed for clock: %s\n", + drv_data->clk_names[i]); + while (--i >= 0) + clk_disable_unprepare(gsc->clock[i]); + return ret; + } + } ret = devm_request_irq(dev, res->start, gsc_irq_handler, 0, pdev->name, gsc); @@ -1118,114 +1082,131 @@ static int gsc_probe(struct platform_device *pdev) goto err_v4l2; platform_set_drvdata(pdev, gsc); - pm_runtime_enable(dev); - ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) - goto err_m2m; + + gsc_hw_set_sw_reset(gsc); + gsc_wait_reset(gsc); vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); dev_dbg(dev, "gsc-%d registered successfully\n", gsc->id); - pm_runtime_put(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; -err_m2m: - gsc_unregister_m2m_device(gsc); err_v4l2: v4l2_device_unregister(&gsc->v4l2_dev); err_clk: - gsc_clk_put(gsc); + for (i = gsc->num_clocks - 1; i >= 0; i--) + clk_disable_unprepare(gsc->clock[i]); return ret; } static int gsc_remove(struct platform_device *pdev) { struct gsc_dev *gsc = platform_get_drvdata(pdev); + int i; + + pm_runtime_get_sync(&pdev->dev); gsc_unregister_m2m_device(gsc); v4l2_device_unregister(&gsc->v4l2_dev); vb2_dma_contig_clear_max_seg_size(&pdev->dev); - pm_runtime_disable(&pdev->dev); - gsc_clk_put(gsc); + for (i = 0; i < gsc->num_clocks; i++) + clk_disable_unprepare(gsc->clock[i]); + + pm_runtime_put_noidle(&pdev->dev); dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name); return 0; } -static int gsc_runtime_resume(struct device *dev) +#ifdef CONFIG_PM +static int gsc_m2m_suspend(struct gsc_dev *gsc) { - struct gsc_dev *gsc = dev_get_drvdata(dev); - int ret = 0; - - pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + unsigned long flags; + int timeout; - ret = clk_enable(gsc->clock); - if (ret) - return ret; + spin_lock_irqsave(&gsc->slock, flags); + if (!gsc_m2m_pending(gsc)) { + spin_unlock_irqrestore(&gsc->slock, flags); + return 0; + } + clear_bit(ST_M2M_SUSPENDED, &gsc->state); + set_bit(ST_M2M_SUSPENDING, &gsc->state); + spin_unlock_irqrestore(&gsc->slock, flags); - gsc_hw_set_sw_reset(gsc); - gsc_wait_reset(gsc); + timeout = wait_event_timeout(gsc->irq_queue, + test_bit(ST_M2M_SUSPENDED, &gsc->state), + GSC_SHUTDOWN_TIMEOUT); - return gsc_m2m_resume(gsc); + clear_bit(ST_M2M_SUSPENDING, &gsc->state); + return timeout == 0 ? -EAGAIN : 0; } -static int gsc_runtime_suspend(struct device *dev) +static void gsc_m2m_resume(struct gsc_dev *gsc) { - struct gsc_dev *gsc = dev_get_drvdata(dev); - int ret = 0; + struct gsc_ctx *ctx; + unsigned long flags; - ret = gsc_m2m_suspend(gsc); - if (!ret) - clk_disable(gsc->clock); + spin_lock_irqsave(&gsc->slock, flags); + /* Clear for full H/W setup in first run after resume */ + ctx = gsc->m2m.ctx; + gsc->m2m.ctx = NULL; + spin_unlock_irqrestore(&gsc->slock, flags); - pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); - return ret; + if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state)) + gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); } -static int gsc_resume(struct device *dev) +static int gsc_runtime_resume(struct device *dev) { struct gsc_dev *gsc = dev_get_drvdata(dev); - unsigned long flags; + int ret = 0; + int i; - pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); + pr_debug("gsc%d: state: 0x%lx\n", gsc->id, gsc->state); - /* Do not resume if the device was idle before system suspend */ - spin_lock_irqsave(&gsc->slock, flags); - if (!test_and_clear_bit(ST_SUSPEND, &gsc->state) || - !gsc_m2m_opened(gsc)) { - spin_unlock_irqrestore(&gsc->slock, flags); - return 0; + for (i = 0; i < gsc->num_clocks; i++) { + ret = clk_prepare_enable(gsc->clock[i]); + if (ret) { + while (--i >= 0) + clk_disable_unprepare(gsc->clock[i]); + return ret; + } } - spin_unlock_irqrestore(&gsc->slock, flags); - if (!pm_runtime_suspended(dev)) - return gsc_runtime_resume(dev); + gsc_hw_set_sw_reset(gsc); + gsc_wait_reset(gsc); + gsc_m2m_resume(gsc); return 0; } -static int gsc_suspend(struct device *dev) +static int gsc_runtime_suspend(struct device *dev) { struct gsc_dev *gsc = dev_get_drvdata(dev); + int ret = 0; + int i; - pr_debug("gsc%d: state: 0x%lx", gsc->id, gsc->state); - - if (test_and_set_bit(ST_SUSPEND, &gsc->state)) - return 0; + ret = gsc_m2m_suspend(gsc); + if (ret) + return ret; - if (!pm_runtime_suspended(dev)) - return gsc_runtime_suspend(dev); + for (i = gsc->num_clocks - 1; i >= 0; i--) + clk_disable_unprepare(gsc->clock[i]); - return 0; + pr_debug("gsc%d: state: 0x%lx\n", gsc->id, gsc->state); + return ret; } +#endif static const struct dev_pm_ops gsc_pm_ops = { - .suspend = gsc_suspend, - .resume = gsc_resume, - .runtime_suspend = gsc_runtime_suspend, - .runtime_resume = gsc_runtime_resume, + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(gsc_runtime_suspend, gsc_runtime_resume, NULL) }; static struct platform_driver gsc_driver = { diff --git a/drivers/media/platform/exynos-gsc/gsc-core.h b/drivers/media/platform/exynos-gsc/gsc-core.h index 7ad7b9dc2243..696217e9af66 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.h +++ b/drivers/media/platform/exynos-gsc/gsc-core.h @@ -33,6 +33,7 @@ #define GSC_SHUTDOWN_TIMEOUT ((100*HZ)/1000) #define GSC_MAX_DEVS 4 +#define GSC_MAX_CLOCKS 4 #define GSC_M2M_BUF_NUM 0 #define GSC_MAX_CTRL_NUM 10 #define GSC_SC_ALIGN_4 4 @@ -48,9 +49,6 @@ #define GSC_CTX_ABORT (1 << 7) enum gsc_dev_flags { - /* for global */ - ST_SUSPEND, - /* for m2m node */ ST_M2M_OPEN, ST_M2M_RUN, @@ -306,12 +304,12 @@ struct gsc_variant { * struct gsc_driverdata - per device type driver data for init time. * * @variant: the variant information for this driver. - * @lclk_frequency: G-Scaler clock frequency * @num_entities: the number of g-scalers */ struct gsc_driverdata { struct gsc_variant *variant[GSC_MAX_DEVS]; - unsigned long lclk_frequency; + const char *clk_names[GSC_MAX_CLOCKS]; + int num_clocks; int num_entities; }; @@ -335,7 +333,8 @@ struct gsc_dev { struct platform_device *pdev; struct gsc_variant *variant; u16 id; - struct clk *clock; + int num_clocks; + struct clk *clock[GSC_MAX_CLOCKS]; void __iomem *regs; wait_queue_head_t irq_queue; struct gsc_m2m_device m2m; diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c index 9f03b791b711..f49f24b4462a 100644 --- a/drivers/media/platform/exynos-gsc/gsc-m2m.c +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c @@ -66,12 +66,29 @@ static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count) return ret > 0 ? 0 : ret; } +static void __gsc_m2m_cleanup_queue(struct gsc_ctx *ctx) +{ + struct vb2_v4l2_buffer *src_vb, *dst_vb; + + while (v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) > 0) { + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_ERROR); + } + + while (v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx) > 0) { + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_ERROR); + } +} + static void gsc_m2m_stop_streaming(struct vb2_queue *q) { struct gsc_ctx *ctx = q->drv_priv; __gsc_m2m_job_abort(ctx); + __gsc_m2m_cleanup_queue(ctx); + pm_runtime_put(&ctx->gsc_dev->pdev->dev); } @@ -365,14 +382,8 @@ static int gsc_m2m_reqbufs(struct file *file, void *fh, max_cnt = (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) ? gsc->variant->in_buf_cnt : gsc->variant->out_buf_cnt; - if (reqbufs->count > max_cnt) { + if (reqbufs->count > max_cnt) return -EINVAL; - } else if (reqbufs->count == 0) { - if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) - gsc_ctx_state_lock_clear(GSC_SRC_FMT, ctx); - else - gsc_ctx_state_lock_clear(GSC_DST_FMT, ctx); - } return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); } @@ -766,30 +777,29 @@ int gsc_register_m2m_device(struct gsc_dev *gsc) gsc->m2m.m2m_dev = v4l2_m2m_init(&gsc_m2m_ops); if (IS_ERR(gsc->m2m.m2m_dev)) { dev_err(&pdev->dev, "failed to initialize v4l2-m2m device\n"); - ret = PTR_ERR(gsc->m2m.m2m_dev); - goto err_m2m_r1; + return PTR_ERR(gsc->m2m.m2m_dev); } ret = video_register_device(&gsc->vdev, VFL_TYPE_GRABBER, -1); if (ret) { dev_err(&pdev->dev, "%s(): failed to register video device\n", __func__); - goto err_m2m_r2; + goto err_m2m_release; } pr_debug("gsc m2m driver registered as /dev/video%d", gsc->vdev.num); return 0; -err_m2m_r2: +err_m2m_release: v4l2_m2m_release(gsc->m2m.m2m_dev); -err_m2m_r1: - video_device_release(gsc->m2m.vfd); return ret; } void gsc_unregister_m2m_device(struct gsc_dev *gsc) { - if (gsc) + if (gsc) { v4l2_m2m_release(gsc->m2m.m2m_dev); + video_unregister_device(&gsc->vdev); + } } diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c index 8f89ca21b631..099c735a39b7 100644 --- a/drivers/media/platform/exynos4-is/fimc-core.c +++ b/drivers/media/platform/exynos4-is/fimc-core.c @@ -736,6 +736,7 @@ void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height, for (i = 0; i < pix->num_planes; ++i) { struct v4l2_plane_pix_format *plane_fmt = &pix->plane_fmt[i]; u32 bpl = plane_fmt->bytesperline; + u32 sizeimage; if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width)) bpl = pix->width; /* Planar */ @@ -755,8 +756,17 @@ void fimc_adjust_mplane_format(struct fimc_fmt *fmt, u32 width, u32 height, bytesperline /= 2; plane_fmt->bytesperline = bytesperline; - plane_fmt->sizeimage = max((pix->width * pix->height * - fmt->depth[i]) / 8, plane_fmt->sizeimage); + sizeimage = pix->width * pix->height * fmt->depth[i] / 8; + + /* Ensure full last row for tiled formats */ + if (tiled_fmt(fmt)) { + /* 64 * 32 * plane_fmt->bytesperline / 64 */ + u32 row_size = plane_fmt->bytesperline * 32; + + sizeimage = roundup(sizeimage, row_size); + } + + plane_fmt->sizeimage = max(sizeimage, plane_fmt->sizeimage); } } diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index 1a1154a9dfa4..e3a8709138fa 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -938,8 +938,7 @@ static int fimc_md_create_links(struct fimc_md *fmd) csis = fmd->csis[pdata->mux_id].sd; if (WARN(csis == NULL, - "MIPI-CSI interface specified " - "but s5p-csis module is not loaded!\n")) + "MIPI-CSI interface specified but s5p-csis module is not loaded!\n")) return -EINVAL; pad = sensor->entity.num_pads - 1; diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c index af59bf4dca2d..a8bda6679422 100644 --- a/drivers/media/platform/marvell-ccic/mcam-core.c +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -49,24 +49,17 @@ static bool alloc_bufs_at_read; module_param(alloc_bufs_at_read, bool, 0444); MODULE_PARM_DESC(alloc_bufs_at_read, - "Non-zero value causes DMA buffers to be allocated when the " - "video capture device is read, rather than at module load " - "time. This saves memory, but decreases the chances of " - "successfully getting those buffers. This parameter is " - "only used in the vmalloc buffer mode"); + "Non-zero value causes DMA buffers to be allocated when the video capture device is read, rather than at module load time. This saves memory, but decreases the chances of successfully getting those buffers. This parameter is only used in the vmalloc buffer mode"); static int n_dma_bufs = 3; module_param(n_dma_bufs, uint, 0644); MODULE_PARM_DESC(n_dma_bufs, - "The number of DMA buffers to allocate. Can be either two " - "(saves memory, makes timing tighter) or three."); + "The number of DMA buffers to allocate. Can be either two (saves memory, makes timing tighter) or three."); static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */ module_param(dma_buf_size, uint, 0444); MODULE_PARM_DESC(dma_buf_size, - "The size of the allocated DMA buffers. If actual operating " - "parameters require larger buffers, an attempt to reallocate " - "will be made."); + "The size of the allocated DMA buffers. If actual operating parameters require larger buffers, an attempt to reallocate will be made."); #else /* MCAM_MODE_VMALLOC */ static const bool alloc_bufs_at_read; static const int n_dma_bufs = 3; /* Used by S/G_PARM */ @@ -75,15 +68,12 @@ static const int n_dma_bufs = 3; /* Used by S/G_PARM */ static bool flip; module_param(flip, bool, 0444); MODULE_PARM_DESC(flip, - "If set, the sensor will be instructed to flip the image " - "vertically."); + "If set, the sensor will be instructed to flip the image vertically."); static int buffer_mode = -1; module_param(buffer_mode, int, 0444); MODULE_PARM_DESC(buffer_mode, - "Set the buffer mode to be used; default is to go with what " - "the platform driver asks for. Set to 0 for vmalloc, 1 for " - "DMA contiguous."); + "Set the buffer mode to be used; default is to go with what the platform driver asks for. Set to 0 for vmalloc, 1 for DMA contiguous."); /* * Status flags. Always manipulated with bit operations. @@ -1759,8 +1749,7 @@ int mccic_register(struct mcam_camera *cam) cam->buffer_mode = buffer_mode; if (cam->buffer_mode == B_DMA_sg && cam->chip_id == MCAM_CAFE) { - printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, " - "attempting vmalloc mode instead\n"); + printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n"); cam->buffer_mode = B_vmalloc; } if (!mcam_buffer_mode_supported(cam->buffer_mode)) { @@ -1828,8 +1817,7 @@ int mccic_register(struct mcam_camera *cam) */ if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) { if (mcam_alloc_dma_bufs(cam, 1)) - cam_warn(cam, "Unable to alloc DMA buffers at load" - " will try again later."); + cam_warn(cam, "Unable to alloc DMA buffers at load will try again later."); } mutex_unlock(&cam->s_mutex); diff --git a/drivers/media/platform/mtk-mdp/Makefile b/drivers/media/platform/mtk-mdp/Makefile new file mode 100644 index 000000000000..f8025699af99 --- /dev/null +++ b/drivers/media/platform/mtk-mdp/Makefile @@ -0,0 +1,9 @@ +mtk-mdp-y += mtk_mdp_core.o +mtk-mdp-y += mtk_mdp_comp.o +mtk-mdp-y += mtk_mdp_m2m.o +mtk-mdp-y += mtk_mdp_regs.o +mtk-mdp-y += mtk_mdp_vpu.o + +obj-$(CONFIG_VIDEO_MEDIATEK_MDP) += mtk-mdp.o + +ccflags-y += -I$(srctree)/drivers/media/platform/mtk-vpu diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c new file mode 100644 index 000000000000..aa8f9fd1f1a2 --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.c @@ -0,0 +1,159 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <soc/mediatek/smi.h> + +#include "mtk_mdp_comp.h" + + +static const char * const mtk_mdp_comp_stem[MTK_MDP_COMP_TYPE_MAX] = { + "mdp_rdma", + "mdp_rsz", + "mdp_wdma", + "mdp_wrot", +}; + +struct mtk_mdp_comp_match { + enum mtk_mdp_comp_type type; + int alias_id; +}; + +static const struct mtk_mdp_comp_match mtk_mdp_matches[MTK_MDP_COMP_ID_MAX] = { + { MTK_MDP_RDMA, 0 }, + { MTK_MDP_RDMA, 1 }, + { MTK_MDP_RSZ, 0 }, + { MTK_MDP_RSZ, 1 }, + { MTK_MDP_RSZ, 2 }, + { MTK_MDP_WDMA, 0 }, + { MTK_MDP_WROT, 0 }, + { MTK_MDP_WROT, 1 }, +}; + +int mtk_mdp_comp_get_id(struct device *dev, struct device_node *node, + enum mtk_mdp_comp_type comp_type) +{ + int id = of_alias_get_id(node, mtk_mdp_comp_stem[comp_type]); + int i; + + for (i = 0; i < ARRAY_SIZE(mtk_mdp_matches); i++) { + if (comp_type == mtk_mdp_matches[i].type && + id == mtk_mdp_matches[i].alias_id) + return i; + } + + dev_err(dev, "Failed to get id. type: %d, id: %d\n", comp_type, id); + + return -EINVAL; +} + +void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp) +{ + int i, err; + + if (comp->larb_dev) { + err = mtk_smi_larb_get(comp->larb_dev); + if (err) + dev_err(dev, + "failed to get larb, err %d. type:%d id:%d\n", + err, comp->type, comp->id); + } + + for (i = 0; i < ARRAY_SIZE(comp->clk); i++) { + if (!comp->clk[i]) + continue; + err = clk_prepare_enable(comp->clk[i]); + if (err) + dev_err(dev, + "failed to enable clock, err %d. type:%d id:%d i:%d\n", + err, comp->type, comp->id, i); + } +} + +void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(comp->clk); i++) { + if (!comp->clk[i]) + continue; + clk_disable_unprepare(comp->clk[i]); + } + + if (comp->larb_dev) + mtk_smi_larb_put(comp->larb_dev); +} + +int mtk_mdp_comp_init(struct device *dev, struct device_node *node, + struct mtk_mdp_comp *comp, enum mtk_mdp_comp_id comp_id) +{ + struct device_node *larb_node; + struct platform_device *larb_pdev; + int i; + + if (comp_id < 0 || comp_id >= MTK_MDP_COMP_ID_MAX) { + dev_err(dev, "Invalid comp_id %d\n", comp_id); + return -EINVAL; + } + + comp->dev_node = of_node_get(node); + comp->id = comp_id; + comp->type = mtk_mdp_matches[comp_id].type; + comp->regs = of_iomap(node, 0); + + for (i = 0; i < ARRAY_SIZE(comp->clk); i++) { + comp->clk[i] = of_clk_get(node, i); + + /* Only RDMA needs two clocks */ + if (comp->type != MTK_MDP_RDMA) + break; + } + + /* Only DMA capable components need the LARB property */ + comp->larb_dev = NULL; + if (comp->type != MTK_MDP_RDMA && + comp->type != MTK_MDP_WDMA && + comp->type != MTK_MDP_WROT) + return 0; + + larb_node = of_parse_phandle(node, "mediatek,larb", 0); + if (!larb_node) { + dev_err(dev, + "Missing mediadek,larb phandle in %s node\n", + node->full_name); + return -EINVAL; + } + + larb_pdev = of_find_device_by_node(larb_node); + if (!larb_pdev) { + dev_warn(dev, "Waiting for larb device %s\n", + larb_node->full_name); + of_node_put(larb_node); + return -EPROBE_DEFER; + } + of_node_put(larb_node); + + comp->larb_dev = &larb_pdev->dev; + + return 0; +} + +void mtk_mdp_comp_deinit(struct device *dev, struct mtk_mdp_comp *comp) +{ + of_node_put(comp->dev_node); +} diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h new file mode 100644 index 000000000000..63b3983ef1a4 --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_comp.h @@ -0,0 +1,72 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MTK_MDP_COMP_H__ +#define __MTK_MDP_COMP_H__ + +/** + * enum mtk_mdp_comp_type - the MDP component + * @MTK_MDP_RDMA: Read DMA + * @MTK_MDP_RSZ: Riszer + * @MTK_MDP_WDMA: Write DMA + * @MTK_MDP_WROT: Write DMA with rotation + */ +enum mtk_mdp_comp_type { + MTK_MDP_RDMA, + MTK_MDP_RSZ, + MTK_MDP_WDMA, + MTK_MDP_WROT, + MTK_MDP_COMP_TYPE_MAX, +}; + +enum mtk_mdp_comp_id { + MTK_MDP_COMP_RDMA0, + MTK_MDP_COMP_RDMA1, + MTK_MDP_COMP_RSZ0, + MTK_MDP_COMP_RSZ1, + MTK_MDP_COMP_RSZ2, + MTK_MDP_COMP_WDMA, + MTK_MDP_COMP_WROT0, + MTK_MDP_COMP_WROT1, + MTK_MDP_COMP_ID_MAX, +}; + +/** + * struct mtk_mdp_comp - the MDP's function component data + * @dev_node: component device node + * @clk: clocks required for component + * @regs: Mapped address of component registers. + * @larb_dev: SMI device required for component + * @type: component type + * @id: component ID + */ +struct mtk_mdp_comp { + struct device_node *dev_node; + struct clk *clk[2]; + void __iomem *regs; + struct device *larb_dev; + enum mtk_mdp_comp_type type; + enum mtk_mdp_comp_id id; +}; + +int mtk_mdp_comp_init(struct device *dev, struct device_node *node, + struct mtk_mdp_comp *comp, enum mtk_mdp_comp_id comp_id); +void mtk_mdp_comp_deinit(struct device *dev, struct mtk_mdp_comp *comp); +int mtk_mdp_comp_get_id(struct device *dev, struct device_node *node, + enum mtk_mdp_comp_type comp_type); +void mtk_mdp_comp_clock_on(struct device *dev, struct mtk_mdp_comp *comp); +void mtk_mdp_comp_clock_off(struct device *dev, struct mtk_mdp_comp *comp); + + +#endif /* __MTK_MDP_COMP_H__ */ diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c new file mode 100644 index 000000000000..51f2b50e406f --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c @@ -0,0 +1,294 @@ +/* + * Copyright (c) 2015-2016 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/workqueue.h> +#include <soc/mediatek/smi.h> + +#include "mtk_mdp_core.h" +#include "mtk_mdp_m2m.h" +#include "mtk_vpu.h" + +/* MDP debug log level (0-3). 3 shows all the logs. */ +int mtk_mdp_dbg_level; +EXPORT_SYMBOL(mtk_mdp_dbg_level); + +module_param(mtk_mdp_dbg_level, int, 0644); + +static const struct of_device_id mtk_mdp_comp_dt_ids[] = { + { + .compatible = "mediatek,mt8173-mdp-rdma", + .data = (void *)MTK_MDP_RDMA + }, { + .compatible = "mediatek,mt8173-mdp-rsz", + .data = (void *)MTK_MDP_RSZ + }, { + .compatible = "mediatek,mt8173-mdp-wdma", + .data = (void *)MTK_MDP_WDMA + }, { + .compatible = "mediatek,mt8173-mdp-wrot", + .data = (void *)MTK_MDP_WROT + }, + { }, +}; + +static const struct of_device_id mtk_mdp_of_ids[] = { + { .compatible = "mediatek,mt8173-mdp", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mtk_mdp_of_ids); + +static void mtk_mdp_clock_on(struct mtk_mdp_dev *mdp) +{ + struct device *dev = &mdp->pdev->dev; + int i; + + for (i = 0; i < ARRAY_SIZE(mdp->comp); i++) + mtk_mdp_comp_clock_on(dev, mdp->comp[i]); +} + +static void mtk_mdp_clock_off(struct mtk_mdp_dev *mdp) +{ + struct device *dev = &mdp->pdev->dev; + int i; + + for (i = 0; i < ARRAY_SIZE(mdp->comp); i++) + mtk_mdp_comp_clock_off(dev, mdp->comp[i]); +} + +static void mtk_mdp_wdt_worker(struct work_struct *work) +{ + struct mtk_mdp_dev *mdp = + container_of(work, struct mtk_mdp_dev, wdt_work); + struct mtk_mdp_ctx *ctx; + + mtk_mdp_err("Watchdog timeout"); + + list_for_each_entry(ctx, &mdp->ctx_list, list) { + mtk_mdp_dbg(0, "[%d] Change as state error", ctx->id); + mtk_mdp_ctx_state_lock_set(ctx, MTK_MDP_CTX_ERROR); + } +} + +static void mtk_mdp_reset_handler(void *priv) +{ + struct mtk_mdp_dev *mdp = priv; + + queue_work(mdp->wdt_wq, &mdp->wdt_work); +} + +static int mtk_mdp_probe(struct platform_device *pdev) +{ + struct mtk_mdp_dev *mdp; + struct device *dev = &pdev->dev; + struct device_node *node; + int i, ret = 0; + + mdp = devm_kzalloc(dev, sizeof(*mdp), GFP_KERNEL); + if (!mdp) + return -ENOMEM; + + mdp->id = pdev->id; + mdp->pdev = pdev; + INIT_LIST_HEAD(&mdp->ctx_list); + + mutex_init(&mdp->lock); + mutex_init(&mdp->vpulock); + + /* Iterate over sibling MDP function blocks */ + for_each_child_of_node(dev->of_node, node) { + const struct of_device_id *of_id; + enum mtk_mdp_comp_type comp_type; + int comp_id; + struct mtk_mdp_comp *comp; + + of_id = of_match_node(mtk_mdp_comp_dt_ids, node); + if (!of_id) + continue; + + if (!of_device_is_available(node)) { + dev_err(dev, "Skipping disabled component %s\n", + node->full_name); + continue; + } + + comp_type = (enum mtk_mdp_comp_type)of_id->data; + comp_id = mtk_mdp_comp_get_id(dev, node, comp_type); + if (comp_id < 0) { + dev_warn(dev, "Skipping unknown component %s\n", + node->full_name); + continue; + } + + comp = devm_kzalloc(dev, sizeof(*comp), GFP_KERNEL); + if (!comp) { + ret = -ENOMEM; + goto err_comp; + } + mdp->comp[comp_id] = comp; + + ret = mtk_mdp_comp_init(dev, node, comp, comp_id); + if (ret) + goto err_comp; + } + + mdp->job_wq = create_singlethread_workqueue(MTK_MDP_MODULE_NAME); + if (!mdp->job_wq) { + dev_err(&pdev->dev, "unable to alloc job workqueue\n"); + ret = -ENOMEM; + goto err_alloc_job_wq; + } + + mdp->wdt_wq = create_singlethread_workqueue("mdp_wdt_wq"); + if (!mdp->wdt_wq) { + dev_err(&pdev->dev, "unable to alloc wdt workqueue\n"); + ret = -ENOMEM; + goto err_alloc_wdt_wq; + } + INIT_WORK(&mdp->wdt_work, mtk_mdp_wdt_worker); + + ret = v4l2_device_register(dev, &mdp->v4l2_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to register v4l2 device\n"); + ret = -EINVAL; + goto err_dev_register; + } + + ret = mtk_mdp_register_m2m_device(mdp); + if (ret) { + v4l2_err(&mdp->v4l2_dev, "Failed to init mem2mem device\n"); + goto err_m2m_register; + } + + mdp->vpu_dev = vpu_get_plat_device(pdev); + vpu_wdt_reg_handler(mdp->vpu_dev, mtk_mdp_reset_handler, mdp, + VPU_RST_MDP); + + platform_set_drvdata(pdev, mdp); + + vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); + + pm_runtime_enable(dev); + dev_dbg(dev, "mdp-%d registered successfully\n", mdp->id); + + return 0; + +err_m2m_register: + v4l2_device_unregister(&mdp->v4l2_dev); + +err_dev_register: + destroy_workqueue(mdp->wdt_wq); + +err_alloc_wdt_wq: + destroy_workqueue(mdp->job_wq); + +err_alloc_job_wq: + +err_comp: + for (i = 0; i < ARRAY_SIZE(mdp->comp); i++) + mtk_mdp_comp_deinit(dev, mdp->comp[i]); + + dev_dbg(dev, "err %d\n", ret); + return ret; +} + +static int mtk_mdp_remove(struct platform_device *pdev) +{ + struct mtk_mdp_dev *mdp = platform_get_drvdata(pdev); + int i; + + pm_runtime_disable(&pdev->dev); + vb2_dma_contig_clear_max_seg_size(&pdev->dev); + mtk_mdp_unregister_m2m_device(mdp); + v4l2_device_unregister(&mdp->v4l2_dev); + + flush_workqueue(mdp->job_wq); + destroy_workqueue(mdp->job_wq); + + for (i = 0; i < ARRAY_SIZE(mdp->comp); i++) + mtk_mdp_comp_deinit(&pdev->dev, mdp->comp[i]); + + dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name); + return 0; +} + +#ifdef CONFIG_PM +static int mtk_mdp_pm_suspend(struct device *dev) +{ + struct mtk_mdp_dev *mdp = dev_get_drvdata(dev); + + mtk_mdp_clock_off(mdp); + + return 0; +} + +static int mtk_mdp_pm_resume(struct device *dev) +{ + struct mtk_mdp_dev *mdp = dev_get_drvdata(dev); + + mtk_mdp_clock_on(mdp); + + return 0; +} +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_SLEEP +static int mtk_mdp_suspend(struct device *dev) +{ + if (pm_runtime_suspended(dev)) + return 0; + + return mtk_mdp_pm_suspend(dev); +} + +static int mtk_mdp_resume(struct device *dev) +{ + if (pm_runtime_suspended(dev)) + return 0; + + return mtk_mdp_pm_resume(dev); +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops mtk_mdp_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mtk_mdp_suspend, mtk_mdp_resume) + SET_RUNTIME_PM_OPS(mtk_mdp_pm_suspend, mtk_mdp_pm_resume, NULL) +}; + +static struct platform_driver mtk_mdp_driver = { + .probe = mtk_mdp_probe, + .remove = mtk_mdp_remove, + .driver = { + .name = MTK_MDP_MODULE_NAME, + .pm = &mtk_mdp_pm_ops, + .of_match_table = mtk_mdp_of_ids, + } +}; + +module_platform_driver(mtk_mdp_driver); + +MODULE_AUTHOR("Houlong Wei <houlong.wei@mediatek.com>"); +MODULE_DESCRIPTION("Mediatek image processor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h new file mode 100644 index 000000000000..848569d4ab90 --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h @@ -0,0 +1,260 @@ +/* + * Copyright (c) 2015-2016 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MTK_MDP_CORE_H__ +#define __MTK_MDP_CORE_H__ + +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mem2mem.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> + +#include "mtk_mdp_vpu.h" +#include "mtk_mdp_comp.h" + + +#define MTK_MDP_MODULE_NAME "mtk-mdp" + +#define MTK_MDP_SHUTDOWN_TIMEOUT ((100*HZ)/1000) /* 100ms */ +#define MTK_MDP_MAX_CTRL_NUM 10 + +#define MTK_MDP_FMT_FLAG_OUTPUT BIT(0) +#define MTK_MDP_FMT_FLAG_CAPTURE BIT(1) + +#define MTK_MDP_VPU_INIT BIT(0) +#define MTK_MDP_SRC_FMT BIT(1) +#define MTK_MDP_DST_FMT BIT(2) +#define MTK_MDP_CTX_ERROR BIT(5) + +/** + * struct mtk_mdp_pix_align - alignement of image + * @org_w: source alignment of width + * @org_h: source alignment of height + * @target_w: dst alignment of width + * @target_h: dst alignment of height + */ +struct mtk_mdp_pix_align { + u16 org_w; + u16 org_h; + u16 target_w; + u16 target_h; +}; + +/** + * struct mtk_mdp_fmt - the driver's internal color format data + * @pixelformat: the fourcc code for this format, 0 if not applicable + * @num_planes: number of physically non-contiguous data planes + * @num_comp: number of logical data planes + * @depth: per plane driver's private 'number of bits per pixel' + * @row_depth: per plane driver's private 'number of bits per pixel per row' + * @flags: flags indicating which operation mode format applies to + MTK_MDP_FMT_FLAG_OUTPUT is used in OUTPUT stream + MTK_MDP_FMT_FLAG_CAPTURE is used in CAPTURE stream + * @align: pointer to a pixel alignment struct, NULL if using default value + */ +struct mtk_mdp_fmt { + u32 pixelformat; + u16 num_planes; + u16 num_comp; + u8 depth[VIDEO_MAX_PLANES]; + u8 row_depth[VIDEO_MAX_PLANES]; + u32 flags; + struct mtk_mdp_pix_align *align; +}; + +/** + * struct mtk_mdp_addr - the image processor physical address set + * @addr: address of planes + */ +struct mtk_mdp_addr { + dma_addr_t addr[MTK_MDP_MAX_NUM_PLANE]; +}; + +/* struct mtk_mdp_ctrls - the image processor control set + * @rotate: rotation degree + * @hflip: horizontal flip + * @vflip: vertical flip + * @global_alpha: the alpha value of current frame + */ +struct mtk_mdp_ctrls { + struct v4l2_ctrl *rotate; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *global_alpha; +}; + +/** + * struct mtk_mdp_frame - source/target frame properties + * @width: SRC : SRCIMG_WIDTH, DST : OUTPUTDMA_WHOLE_IMG_WIDTH + * @height: SRC : SRCIMG_HEIGHT, DST : OUTPUTDMA_WHOLE_IMG_HEIGHT + * @crop: cropped(source)/scaled(destination) size + * @payload: image size in bytes (w x h x bpp) + * @pitch: bytes per line of image in memory + * @addr: image frame buffer physical addresses + * @fmt: color format pointer + * @alpha: frame's alpha value + */ +struct mtk_mdp_frame { + u32 width; + u32 height; + struct v4l2_rect crop; + unsigned long payload[VIDEO_MAX_PLANES]; + unsigned int pitch[VIDEO_MAX_PLANES]; + struct mtk_mdp_addr addr; + const struct mtk_mdp_fmt *fmt; + u8 alpha; +}; + +/** + * struct mtk_mdp_variant - image processor variant information + * @pix_max: maximum limit of image size + * @pix_min: minimun limit of image size + * @pix_align: alignement of image + * @h_scale_up_max: maximum scale-up in horizontal + * @v_scale_up_max: maximum scale-up in vertical + * @h_scale_down_max: maximum scale-down in horizontal + * @v_scale_down_max: maximum scale-down in vertical + */ +struct mtk_mdp_variant { + struct mtk_mdp_pix_limit *pix_max; + struct mtk_mdp_pix_limit *pix_min; + struct mtk_mdp_pix_align *pix_align; + u16 h_scale_up_max; + u16 v_scale_up_max; + u16 h_scale_down_max; + u16 v_scale_down_max; +}; + +/** + * struct mtk_mdp_dev - abstraction for image processor entity + * @lock: the mutex protecting this data structure + * @vpulock: the mutex protecting the communication with VPU + * @pdev: pointer to the image processor platform device + * @variant: the IP variant information + * @id: image processor device index (0..MTK_MDP_MAX_DEVS) + * @comp: MDP function components + * @m2m_dev: v4l2 memory-to-memory device data + * @ctx_list: list of struct mtk_mdp_ctx + * @vdev: video device for image processor driver + * @v4l2_dev: V4L2 device to register video devices for. + * @job_wq: processor work queue + * @vpu_dev: VPU platform device + * @ctx_num: counter of active MTK MDP context + * @id_counter: An integer id given to the next opened context + * @wdt_wq: work queue for VPU watchdog + * @wdt_work: worker for VPU watchdog + */ +struct mtk_mdp_dev { + struct mutex lock; + struct mutex vpulock; + struct platform_device *pdev; + struct mtk_mdp_variant *variant; + u16 id; + struct mtk_mdp_comp *comp[MTK_MDP_COMP_ID_MAX]; + struct v4l2_m2m_dev *m2m_dev; + struct list_head ctx_list; + struct video_device vdev; + struct v4l2_device v4l2_dev; + struct workqueue_struct *job_wq; + struct platform_device *vpu_dev; + int ctx_num; + unsigned long id_counter; + struct workqueue_struct *wdt_wq; + struct work_struct wdt_work; +}; + +/** + * mtk_mdp_ctx - the device context data + * @list: link to ctx_list of mtk_mdp_dev + * @s_frame: source frame properties + * @d_frame: destination frame properties + * @id: index of the context that this structure describes + * @flags: additional flags for image conversion + * @state: flags to keep track of user configuration + Protected by slock + * @rotation: rotates the image by specified angle + * @hflip: mirror the picture horizontally + * @vflip: mirror the picture vertically + * @mdp_dev: the image processor device this context applies to + * @m2m_ctx: memory-to-memory device context + * @fh: v4l2 file handle + * @ctrl_handler: v4l2 controls handler + * @ctrls image processor control set + * @ctrls_rdy: true if the control handler is initialized + * @colorspace: enum v4l2_colorspace; supplemental to pixelformat + * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + * @quant: enum v4l2_quantization, colorspace quantization + * @vpu: VPU instance + * @slock: the mutex protecting mtp_mdp_ctx.state + * @work: worker for image processing + */ +struct mtk_mdp_ctx { + struct list_head list; + struct mtk_mdp_frame s_frame; + struct mtk_mdp_frame d_frame; + u32 flags; + u32 state; + int id; + int rotation; + u32 hflip:1; + u32 vflip:1; + struct mtk_mdp_dev *mdp_dev; + struct v4l2_m2m_ctx *m2m_ctx; + struct v4l2_fh fh; + struct v4l2_ctrl_handler ctrl_handler; + struct mtk_mdp_ctrls ctrls; + bool ctrls_rdy; + enum v4l2_colorspace colorspace; + enum v4l2_ycbcr_encoding ycbcr_enc; + enum v4l2_xfer_func xfer_func; + enum v4l2_quantization quant; + + struct mtk_mdp_vpu vpu; + struct mutex slock; + struct work_struct work; +}; + +extern int mtk_mdp_dbg_level; + +#if defined(DEBUG) + +#define mtk_mdp_dbg(level, fmt, args...) \ + do { \ + if (mtk_mdp_dbg_level >= level) \ + pr_info("[MTK_MDP] level=%d %s(),%d: " fmt "\n", \ + level, __func__, __LINE__, ##args); \ + } while (0) + +#define mtk_mdp_err(fmt, args...) \ + pr_err("[MTK_MDP][ERROR] %s:%d: " fmt "\n", __func__, __LINE__, \ + ##args) + + +#define mtk_mdp_dbg_enter() mtk_mdp_dbg(3, "+") +#define mtk_mdp_dbg_leave() mtk_mdp_dbg(3, "-") + +#else + +#define mtk_mdp_dbg(level, fmt, args...) {} +#define mtk_mdp_err(fmt, args...) +#define mtk_mdp_dbg_enter() +#define mtk_mdp_dbg_leave() + +#endif + +#endif /* __MTK_MDP_CORE_H__ */ diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_ipi.h b/drivers/media/platform/mtk-mdp/mtk_mdp_ipi.h new file mode 100644 index 000000000000..78e2cc0dead1 --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_ipi.h @@ -0,0 +1,126 @@ +/* + * Copyright (c) 2015-2016 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MTK_MDP_IPI_H__ +#define __MTK_MDP_IPI_H__ + +#define MTK_MDP_MAX_NUM_PLANE 3 + +enum mdp_ipi_msgid { + AP_MDP_INIT = 0xd000, + AP_MDP_DEINIT = 0xd001, + AP_MDP_PROCESS = 0xd002, + + VPU_MDP_INIT_ACK = 0xe000, + VPU_MDP_DEINIT_ACK = 0xe001, + VPU_MDP_PROCESS_ACK = 0xe002 +}; + +#pragma pack(push, 4) + +/** + * struct mdp_ipi_init - for AP_MDP_INIT + * @msg_id : AP_MDP_INIT + * @ipi_id : IPI_MDP + * @ap_inst : AP mtk_mdp_vpu address + */ +struct mdp_ipi_init { + uint32_t msg_id; + uint32_t ipi_id; + uint64_t ap_inst; +}; + +/** + * struct mdp_ipi_comm - for AP_MDP_PROCESS, AP_MDP_DEINIT + * @msg_id : AP_MDP_PROCESS, AP_MDP_DEINIT + * @ipi_id : IPI_MDP + * @ap_inst : AP mtk_mdp_vpu address + * @vpu_inst_addr : VPU MDP instance address + */ +struct mdp_ipi_comm { + uint32_t msg_id; + uint32_t ipi_id; + uint64_t ap_inst; + uint32_t vpu_inst_addr; +}; + +/** + * struct mdp_ipi_comm_ack - for VPU_MDP_DEINIT_ACK, VPU_MDP_PROCESS_ACK + * @msg_id : VPU_MDP_DEINIT_ACK, VPU_MDP_PROCESS_ACK + * @ipi_id : IPI_MDP + * @ap_inst : AP mtk_mdp_vpu address + * @vpu_inst_addr : VPU MDP instance address + * @status : VPU exeuction result + */ +struct mdp_ipi_comm_ack { + uint32_t msg_id; + uint32_t ipi_id; + uint64_t ap_inst; + uint32_t vpu_inst_addr; + int32_t status; +}; + +/** + * struct mdp_config - configured for source/destination image + * @x : left + * @y : top + * @w : width + * @h : height + * @w_stride : bytes in horizontal + * @h_stride : bytes in vertical + * @crop_x : cropped left + * @crop_y : cropped top + * @crop_w : cropped width + * @crop_h : cropped height + * @format : color format + */ +struct mdp_config { + int32_t x; + int32_t y; + int32_t w; + int32_t h; + int32_t w_stride; + int32_t h_stride; + int32_t crop_x; + int32_t crop_y; + int32_t crop_w; + int32_t crop_h; + int32_t format; +}; + +struct mdp_buffer { + uint64_t addr_mva[MTK_MDP_MAX_NUM_PLANE]; + int32_t plane_size[MTK_MDP_MAX_NUM_PLANE]; + int32_t plane_num; +}; + +struct mdp_config_misc { + int32_t orientation; /* 0, 90, 180, 270 */ + int32_t hflip; /* 1 will enable the flip */ + int32_t vflip; /* 1 will enable the flip */ + int32_t alpha; /* global alpha */ +}; + +struct mdp_process_vsi { + struct mdp_config src_config; + struct mdp_buffer src_buffer; + struct mdp_config dst_config; + struct mdp_buffer dst_buffer; + struct mdp_config_misc misc; +}; + +#pragma pack(pop) + +#endif /* __MTK_MDP_IPI_H__ */ diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c new file mode 100644 index 000000000000..9a747e7321cc --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c @@ -0,0 +1,1279 @@ +/* + * Copyright (c) 2015-2016 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <media/v4l2-event.h> +#include <media/v4l2-ioctl.h> + +#include "mtk_mdp_core.h" +#include "mtk_mdp_m2m.h" +#include "mtk_mdp_regs.h" +#include "mtk_vpu.h" + + +/** + * struct mtk_mdp_pix_limit - image pixel size limits + * @org_w: source pixel width + * @org_h: source pixel height + * @target_rot_dis_w: pixel dst scaled width with the rotator is off + * @target_rot_dis_h: pixel dst scaled height with the rotator is off + * @target_rot_en_w: pixel dst scaled width with the rotator is on + * @target_rot_en_h: pixel dst scaled height with the rotator is on + */ +struct mtk_mdp_pix_limit { + u16 org_w; + u16 org_h; + u16 target_rot_dis_w; + u16 target_rot_dis_h; + u16 target_rot_en_w; + u16 target_rot_en_h; +}; + +static struct mtk_mdp_pix_align mtk_mdp_size_align = { + .org_w = 16, + .org_h = 16, + .target_w = 2, + .target_h = 2, +}; + +static const struct mtk_mdp_fmt mtk_mdp_formats[] = { + { + .pixelformat = V4L2_PIX_FMT_MT21C, + .depth = { 8, 4 }, + .row_depth = { 8, 8 }, + .num_planes = 2, + .num_comp = 2, + .align = &mtk_mdp_size_align, + .flags = MTK_MDP_FMT_FLAG_OUTPUT, + }, { + .pixelformat = V4L2_PIX_FMT_NV12M, + .depth = { 8, 4 }, + .row_depth = { 8, 8 }, + .num_planes = 2, + .num_comp = 2, + .flags = MTK_MDP_FMT_FLAG_OUTPUT | + MTK_MDP_FMT_FLAG_CAPTURE, + }, { + .pixelformat = V4L2_PIX_FMT_YUV420M, + .depth = { 8, 2, 2 }, + .row_depth = { 8, 4, 4 }, + .num_planes = 3, + .num_comp = 3, + .flags = MTK_MDP_FMT_FLAG_OUTPUT | + MTK_MDP_FMT_FLAG_CAPTURE, + }, { + .pixelformat = V4L2_PIX_FMT_YVU420, + .depth = { 12 }, + .row_depth = { 8 }, + .num_planes = 1, + .num_comp = 3, + .flags = MTK_MDP_FMT_FLAG_OUTPUT | + MTK_MDP_FMT_FLAG_CAPTURE, + } +}; + +static struct mtk_mdp_pix_limit mtk_mdp_size_max = { + .target_rot_dis_w = 4096, + .target_rot_dis_h = 4096, + .target_rot_en_w = 4096, + .target_rot_en_h = 4096, +}; + +static struct mtk_mdp_pix_limit mtk_mdp_size_min = { + .org_w = 16, + .org_h = 16, + .target_rot_dis_w = 16, + .target_rot_dis_h = 16, + .target_rot_en_w = 16, + .target_rot_en_h = 16, +}; + +/* align size for normal raster scan pixel format */ +static struct mtk_mdp_pix_align mtk_mdp_rs_align = { + .org_w = 2, + .org_h = 2, + .target_w = 2, + .target_h = 2, +}; + +static struct mtk_mdp_variant mtk_mdp_default_variant = { + .pix_max = &mtk_mdp_size_max, + .pix_min = &mtk_mdp_size_min, + .pix_align = &mtk_mdp_rs_align, + .h_scale_up_max = 32, + .v_scale_up_max = 32, + .h_scale_down_max = 32, + .v_scale_down_max = 128, +}; + +static const struct mtk_mdp_fmt *mtk_mdp_find_fmt(u32 pixelformat, u32 type) +{ + u32 i, flag; + + flag = V4L2_TYPE_IS_OUTPUT(type) ? MTK_MDP_FMT_FLAG_OUTPUT : + MTK_MDP_FMT_FLAG_CAPTURE; + + for (i = 0; i < ARRAY_SIZE(mtk_mdp_formats); ++i) { + if (!(mtk_mdp_formats[i].flags & flag)) + continue; + if (mtk_mdp_formats[i].pixelformat == pixelformat) + return &mtk_mdp_formats[i]; + } + return NULL; +} + +static const struct mtk_mdp_fmt *mtk_mdp_find_fmt_by_index(u32 index, u32 type) +{ + u32 i, flag, num = 0; + + flag = V4L2_TYPE_IS_OUTPUT(type) ? MTK_MDP_FMT_FLAG_OUTPUT : + MTK_MDP_FMT_FLAG_CAPTURE; + + for (i = 0; i < ARRAY_SIZE(mtk_mdp_formats); ++i) { + if (!(mtk_mdp_formats[i].flags & flag)) + continue; + if (index == num) + return &mtk_mdp_formats[i]; + num++; + } + return NULL; +} + +static void mtk_mdp_bound_align_image(u32 *w, unsigned int wmin, + unsigned int wmax, unsigned int align_w, + u32 *h, unsigned int hmin, + unsigned int hmax, unsigned int align_h) +{ + int org_w, org_h, step_w, step_h; + int walign, halign; + + org_w = *w; + org_h = *h; + walign = ffs(align_w) - 1; + halign = ffs(align_h) - 1; + v4l_bound_align_image(w, wmin, wmax, walign, h, hmin, hmax, halign, 0); + + step_w = 1 << walign; + step_h = 1 << halign; + if (*w < org_w && (*w + step_w) <= wmax) + *w += step_w; + if (*h < org_h && (*h + step_h) <= hmax) + *h += step_h; +} + +static const struct mtk_mdp_fmt *mtk_mdp_try_fmt_mplane(struct mtk_mdp_ctx *ctx, + struct v4l2_format *f) +{ + struct mtk_mdp_dev *mdp = ctx->mdp_dev; + struct mtk_mdp_variant *variant = mdp->variant; + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + const struct mtk_mdp_fmt *fmt; + u32 max_w, max_h, align_w, align_h; + u32 min_w, min_h, org_w, org_h; + int i; + + fmt = mtk_mdp_find_fmt(pix_mp->pixelformat, f->type); + if (!fmt) + fmt = mtk_mdp_find_fmt_by_index(0, f->type); + if (!fmt) { + dev_dbg(&ctx->mdp_dev->pdev->dev, + "pixelformat format 0x%X invalid\n", + pix_mp->pixelformat); + return NULL; + } + + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->pixelformat = fmt->pixelformat; + if (!V4L2_TYPE_IS_OUTPUT(f->type)) { + pix_mp->colorspace = ctx->colorspace; + pix_mp->xfer_func = ctx->xfer_func; + pix_mp->ycbcr_enc = ctx->ycbcr_enc; + pix_mp->quantization = ctx->quant; + } + memset(pix_mp->reserved, 0, sizeof(pix_mp->reserved)); + + max_w = variant->pix_max->target_rot_dis_w; + max_h = variant->pix_max->target_rot_dis_h; + + if (fmt->align == NULL) { + /* use default alignment */ + align_w = variant->pix_align->org_w; + align_h = variant->pix_align->org_h; + } else { + align_w = fmt->align->org_w; + align_h = fmt->align->org_h; + } + + if (V4L2_TYPE_IS_OUTPUT(f->type)) { + min_w = variant->pix_min->org_w; + min_h = variant->pix_min->org_h; + } else { + min_w = variant->pix_min->target_rot_dis_w; + min_h = variant->pix_min->target_rot_dis_h; + } + + mtk_mdp_dbg(2, "[%d] type:%d, wxh:%ux%u, align:%ux%u, max:%ux%u", + ctx->id, f->type, pix_mp->width, pix_mp->height, + align_w, align_h, max_w, max_h); + /* + * To check if image size is modified to adjust parameter against + * hardware abilities + */ + org_w = pix_mp->width; + org_h = pix_mp->height; + + mtk_mdp_bound_align_image(&pix_mp->width, min_w, max_w, align_w, + &pix_mp->height, min_h, max_h, align_h); + + if (org_w != pix_mp->width || org_h != pix_mp->height) + mtk_mdp_dbg(1, "[%d] size change:%ux%u to %ux%u", ctx->id, + org_w, org_h, pix_mp->width, pix_mp->height); + pix_mp->num_planes = fmt->num_planes; + + for (i = 0; i < pix_mp->num_planes; ++i) { + int bpl = (pix_mp->width * fmt->row_depth[i]) / 8; + int sizeimage = (pix_mp->width * pix_mp->height * + fmt->depth[i]) / 8; + + pix_mp->plane_fmt[i].bytesperline = bpl; + if (pix_mp->plane_fmt[i].sizeimage < sizeimage) + pix_mp->plane_fmt[i].sizeimage = sizeimage; + memset(pix_mp->plane_fmt[i].reserved, 0, + sizeof(pix_mp->plane_fmt[i].reserved)); + mtk_mdp_dbg(2, "[%d] p%d, bpl:%d, sizeimage:%u (%u)", ctx->id, + i, bpl, pix_mp->plane_fmt[i].sizeimage, sizeimage); + } + + return fmt; +} + +static struct mtk_mdp_frame *mtk_mdp_ctx_get_frame(struct mtk_mdp_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return &ctx->s_frame; + return &ctx->d_frame; +} + +static void mtk_mdp_check_crop_change(u32 new_w, u32 new_h, u32 *w, u32 *h) +{ + if (new_w != *w || new_h != *h) { + mtk_mdp_dbg(1, "size change:%dx%d to %dx%d", + *w, *h, new_w, new_h); + + *w = new_w; + *h = new_h; + } +} + +static int mtk_mdp_try_crop(struct mtk_mdp_ctx *ctx, u32 type, + struct v4l2_rect *r) +{ + struct mtk_mdp_frame *frame; + struct mtk_mdp_dev *mdp = ctx->mdp_dev; + struct mtk_mdp_variant *variant = mdp->variant; + u32 align_w, align_h, new_w, new_h; + u32 min_w, min_h, max_w, max_h; + + if (r->top < 0 || r->left < 0) { + dev_err(&ctx->mdp_dev->pdev->dev, + "doesn't support negative values for top & left\n"); + return -EINVAL; + } + + mtk_mdp_dbg(2, "[%d] type:%d, set wxh:%dx%d", ctx->id, type, + r->width, r->height); + + frame = mtk_mdp_ctx_get_frame(ctx, type); + max_w = frame->width; + max_h = frame->height; + new_w = r->width; + new_h = r->height; + + if (V4L2_TYPE_IS_OUTPUT(type)) { + align_w = 1; + align_h = 1; + min_w = 64; + min_h = 32; + } else { + align_w = variant->pix_align->target_w; + align_h = variant->pix_align->target_h; + if (ctx->ctrls.rotate->val == 90 || + ctx->ctrls.rotate->val == 270) { + max_w = frame->height; + max_h = frame->width; + min_w = variant->pix_min->target_rot_en_w; + min_h = variant->pix_min->target_rot_en_h; + new_w = r->height; + new_h = r->width; + } else { + min_w = variant->pix_min->target_rot_dis_w; + min_h = variant->pix_min->target_rot_dis_h; + } + } + + mtk_mdp_dbg(2, "[%d] align:%dx%d, min:%dx%d, new:%dx%d", ctx->id, + align_w, align_h, min_w, min_h, new_w, new_h); + + mtk_mdp_bound_align_image(&new_w, min_w, max_w, align_w, + &new_h, min_h, max_h, align_h); + + if (!V4L2_TYPE_IS_OUTPUT(type) && + (ctx->ctrls.rotate->val == 90 || + ctx->ctrls.rotate->val == 270)) + mtk_mdp_check_crop_change(new_h, new_w, + &r->width, &r->height); + else + mtk_mdp_check_crop_change(new_w, new_h, + &r->width, &r->height); + + /* adjust left/top if cropping rectangle is out of bounds */ + /* Need to add code to algin left value with 2's multiple */ + if (r->left + new_w > max_w) + r->left = max_w - new_w; + if (r->top + new_h > max_h) + r->top = max_h - new_h; + + if (r->left & 1) + r->left -= 1; + + mtk_mdp_dbg(2, "[%d] crop l,t,w,h:%d,%d,%d,%d, max:%dx%d", ctx->id, + r->left, r->top, r->width, + r->height, max_w, max_h); + return 0; +} + +static inline struct mtk_mdp_ctx *fh_to_ctx(struct v4l2_fh *fh) +{ + return container_of(fh, struct mtk_mdp_ctx, fh); +} + +static inline struct mtk_mdp_ctx *ctrl_to_ctx(struct v4l2_ctrl *ctrl) +{ + return container_of(ctrl->handler, struct mtk_mdp_ctx, ctrl_handler); +} + +void mtk_mdp_ctx_state_lock_set(struct mtk_mdp_ctx *ctx, u32 state) +{ + mutex_lock(&ctx->slock); + ctx->state |= state; + mutex_unlock(&ctx->slock); +} + +static void mtk_mdp_ctx_state_lock_clear(struct mtk_mdp_ctx *ctx, u32 state) +{ + mutex_lock(&ctx->slock); + ctx->state &= ~state; + mutex_unlock(&ctx->slock); +} + +static bool mtk_mdp_ctx_state_is_set(struct mtk_mdp_ctx *ctx, u32 mask) +{ + bool ret; + + mutex_lock(&ctx->slock); + ret = (ctx->state & mask) == mask; + mutex_unlock(&ctx->slock); + return ret; +} + +static void mtk_mdp_ctx_lock(struct vb2_queue *vq) +{ + struct mtk_mdp_ctx *ctx = vb2_get_drv_priv(vq); + + mutex_lock(&ctx->mdp_dev->lock); +} + +static void mtk_mdp_ctx_unlock(struct vb2_queue *vq) +{ + struct mtk_mdp_ctx *ctx = vb2_get_drv_priv(vq); + + mutex_unlock(&ctx->mdp_dev->lock); +} + +static void mtk_mdp_set_frame_size(struct mtk_mdp_frame *frame, int width, + int height) +{ + frame->width = width; + frame->height = height; + frame->crop.width = width; + frame->crop.height = height; + frame->crop.left = 0; + frame->crop.top = 0; +} + +static int mtk_mdp_m2m_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct mtk_mdp_ctx *ctx = q->drv_priv; + int ret; + + ret = pm_runtime_get_sync(&ctx->mdp_dev->pdev->dev); + if (ret < 0) + mtk_mdp_dbg(1, "[%d] pm_runtime_get_sync failed:%d", + ctx->id, ret); + + return 0; +} + +static void *mtk_mdp_m2m_buf_remove(struct mtk_mdp_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + else + return v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); +} + +static void mtk_mdp_m2m_stop_streaming(struct vb2_queue *q) +{ + struct mtk_mdp_ctx *ctx = q->drv_priv; + struct vb2_buffer *vb; + + vb = mtk_mdp_m2m_buf_remove(ctx, q->type); + while (vb != NULL) { + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(vb), VB2_BUF_STATE_ERROR); + vb = mtk_mdp_m2m_buf_remove(ctx, q->type); + } + + pm_runtime_put(&ctx->mdp_dev->pdev->dev); +} + +static void mtk_mdp_m2m_job_abort(void *priv) +{ +} + +/* The color format (num_planes) must be already configured. */ +static void mtk_mdp_prepare_addr(struct mtk_mdp_ctx *ctx, + struct vb2_buffer *vb, + struct mtk_mdp_frame *frame, + struct mtk_mdp_addr *addr) +{ + u32 pix_size, planes, i; + + pix_size = frame->width * frame->height; + planes = min_t(u32, frame->fmt->num_planes, ARRAY_SIZE(addr->addr)); + for (i = 0; i < planes; i++) + addr->addr[i] = vb2_dma_contig_plane_dma_addr(vb, i); + + if (planes == 1) { + if (frame->fmt->pixelformat == V4L2_PIX_FMT_YVU420) { + addr->addr[1] = (dma_addr_t)(addr->addr[0] + pix_size); + addr->addr[2] = (dma_addr_t)(addr->addr[1] + + (pix_size >> 2)); + } else { + dev_err(&ctx->mdp_dev->pdev->dev, + "Invalid pixelformat:0x%x\n", + frame->fmt->pixelformat); + } + } + mtk_mdp_dbg(3, "[%d] planes:%d, size:%d, addr:%p,%p,%p", + ctx->id, planes, pix_size, (void *)addr->addr[0], + (void *)addr->addr[1], (void *)addr->addr[2]); +} + +static void mtk_mdp_m2m_get_bufs(struct mtk_mdp_ctx *ctx) +{ + struct mtk_mdp_frame *s_frame, *d_frame; + struct vb2_buffer *src_vb, *dst_vb; + struct vb2_v4l2_buffer *src_vbuf, *dst_vbuf; + + s_frame = &ctx->s_frame; + d_frame = &ctx->d_frame; + + src_vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + mtk_mdp_prepare_addr(ctx, src_vb, s_frame, &s_frame->addr); + + dst_vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + mtk_mdp_prepare_addr(ctx, dst_vb, d_frame, &d_frame->addr); + + src_vbuf = to_vb2_v4l2_buffer(src_vb); + dst_vbuf = to_vb2_v4l2_buffer(dst_vb); + dst_vbuf->vb2_buf.timestamp = src_vbuf->vb2_buf.timestamp; +} + +static void mtk_mdp_process_done(void *priv, int vb_state) +{ + struct mtk_mdp_dev *mdp = priv; + struct mtk_mdp_ctx *ctx; + struct vb2_buffer *src_vb, *dst_vb; + struct vb2_v4l2_buffer *src_vbuf = NULL, *dst_vbuf = NULL; + + ctx = v4l2_m2m_get_curr_priv(mdp->m2m_dev); + if (!ctx) + return; + + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + src_vbuf = to_vb2_v4l2_buffer(src_vb); + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + dst_vbuf = to_vb2_v4l2_buffer(dst_vb); + + dst_vbuf->vb2_buf.timestamp = src_vbuf->vb2_buf.timestamp; + dst_vbuf->timecode = src_vbuf->timecode; + dst_vbuf->flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK; + dst_vbuf->flags |= src_vbuf->flags & V4L2_BUF_FLAG_TSTAMP_SRC_MASK; + + v4l2_m2m_buf_done(src_vbuf, vb_state); + v4l2_m2m_buf_done(dst_vbuf, vb_state); + v4l2_m2m_job_finish(ctx->mdp_dev->m2m_dev, ctx->m2m_ctx); +} + +static void mtk_mdp_m2m_worker(struct work_struct *work) +{ + struct mtk_mdp_ctx *ctx = + container_of(work, struct mtk_mdp_ctx, work); + struct mtk_mdp_dev *mdp = ctx->mdp_dev; + enum vb2_buffer_state buf_state = VB2_BUF_STATE_ERROR; + int ret; + + if (mtk_mdp_ctx_state_is_set(ctx, MTK_MDP_CTX_ERROR)) { + dev_err(&mdp->pdev->dev, "ctx is in error state"); + goto worker_end; + } + + mtk_mdp_m2m_get_bufs(ctx); + + mtk_mdp_hw_set_input_addr(ctx, &ctx->s_frame.addr); + mtk_mdp_hw_set_output_addr(ctx, &ctx->d_frame.addr); + + mtk_mdp_hw_set_in_size(ctx); + mtk_mdp_hw_set_in_image_format(ctx); + + mtk_mdp_hw_set_out_size(ctx); + mtk_mdp_hw_set_out_image_format(ctx); + + mtk_mdp_hw_set_rotation(ctx); + mtk_mdp_hw_set_global_alpha(ctx); + + ret = mtk_mdp_vpu_process(&ctx->vpu); + if (ret) { + dev_err(&mdp->pdev->dev, "processing failed: %d", ret); + goto worker_end; + } + + buf_state = VB2_BUF_STATE_DONE; + +worker_end: + mtk_mdp_process_done(mdp, buf_state); +} + +static void mtk_mdp_m2m_device_run(void *priv) +{ + struct mtk_mdp_ctx *ctx = priv; + + queue_work(ctx->mdp_dev->job_wq, &ctx->work); +} + +static int mtk_mdp_m2m_queue_setup(struct vb2_queue *vq, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], struct device *alloc_devs[]) +{ + struct mtk_mdp_ctx *ctx = vb2_get_drv_priv(vq); + struct mtk_mdp_frame *frame; + int i; + + frame = mtk_mdp_ctx_get_frame(ctx, vq->type); + *num_planes = frame->fmt->num_planes; + for (i = 0; i < frame->fmt->num_planes; i++) + sizes[i] = frame->payload[i]; + mtk_mdp_dbg(2, "[%d] type:%d, planes:%d, buffers:%d, size:%u,%u", + ctx->id, vq->type, *num_planes, *num_buffers, + sizes[0], sizes[1]); + return 0; +} + +static int mtk_mdp_m2m_buf_prepare(struct vb2_buffer *vb) +{ + struct mtk_mdp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_mdp_frame *frame; + int i; + + frame = mtk_mdp_ctx_get_frame(ctx, vb->vb2_queue->type); + + if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { + for (i = 0; i < frame->fmt->num_planes; i++) + vb2_set_plane_payload(vb, i, frame->payload[i]); + } + + return 0; +} + +static void mtk_mdp_m2m_buf_queue(struct vb2_buffer *vb) +{ + struct mtk_mdp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + v4l2_m2m_buf_queue(ctx->m2m_ctx, to_vb2_v4l2_buffer(vb)); +} + +static struct vb2_ops mtk_mdp_m2m_qops = { + .queue_setup = mtk_mdp_m2m_queue_setup, + .buf_prepare = mtk_mdp_m2m_buf_prepare, + .buf_queue = mtk_mdp_m2m_buf_queue, + .wait_prepare = mtk_mdp_ctx_unlock, + .wait_finish = mtk_mdp_ctx_lock, + .stop_streaming = mtk_mdp_m2m_stop_streaming, + .start_streaming = mtk_mdp_m2m_start_streaming, +}; + +static int mtk_mdp_m2m_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + struct mtk_mdp_dev *mdp = ctx->mdp_dev; + + strlcpy(cap->driver, MTK_MDP_MODULE_NAME, sizeof(cap->driver)); + strlcpy(cap->card, mdp->pdev->name, sizeof(cap->card)); + strlcpy(cap->bus_info, "platform:mt8173", sizeof(cap->bus_info)); + + return 0; +} + +static int mtk_mdp_enum_fmt_mplane(struct v4l2_fmtdesc *f, u32 type) +{ + const struct mtk_mdp_fmt *fmt; + + fmt = mtk_mdp_find_fmt_by_index(f->index, type); + if (!fmt) + return -EINVAL; + + f->pixelformat = fmt->pixelformat; + + return 0; +} + +static int mtk_mdp_m2m_enum_fmt_mplane_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return mtk_mdp_enum_fmt_mplane(f, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); +} + +static int mtk_mdp_m2m_enum_fmt_mplane_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return mtk_mdp_enum_fmt_mplane(f, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); +} + +static int mtk_mdp_m2m_g_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + struct mtk_mdp_frame *frame; + struct v4l2_pix_format_mplane *pix_mp; + int i; + + mtk_mdp_dbg(2, "[%d] type:%d", ctx->id, f->type); + + frame = mtk_mdp_ctx_get_frame(ctx, f->type); + pix_mp = &f->fmt.pix_mp; + + pix_mp->width = frame->width; + pix_mp->height = frame->height; + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->pixelformat = frame->fmt->pixelformat; + pix_mp->num_planes = frame->fmt->num_planes; + pix_mp->colorspace = ctx->colorspace; + pix_mp->xfer_func = ctx->xfer_func; + pix_mp->ycbcr_enc = ctx->ycbcr_enc; + pix_mp->quantization = ctx->quant; + mtk_mdp_dbg(2, "[%d] wxh:%dx%d", ctx->id, + pix_mp->width, pix_mp->height); + + for (i = 0; i < pix_mp->num_planes; ++i) { + pix_mp->plane_fmt[i].bytesperline = (frame->width * + frame->fmt->row_depth[i]) / 8; + pix_mp->plane_fmt[i].sizeimage = (frame->width * + frame->height * frame->fmt->depth[i]) / 8; + + mtk_mdp_dbg(2, "[%d] p%d, bpl:%d, sizeimage:%d", ctx->id, i, + pix_mp->plane_fmt[i].bytesperline, + pix_mp->plane_fmt[i].sizeimage); + } + + return 0; +} + +static int mtk_mdp_m2m_try_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + + if (!mtk_mdp_try_fmt_mplane(ctx, f)) + return -EINVAL; + return 0; +} + +static int mtk_mdp_m2m_s_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + struct vb2_queue *vq; + struct mtk_mdp_frame *frame; + struct v4l2_pix_format_mplane *pix_mp; + const struct mtk_mdp_fmt *fmt; + int i; + + mtk_mdp_dbg(2, "[%d] type:%d", ctx->id, f->type); + + frame = mtk_mdp_ctx_get_frame(ctx, f->type); + fmt = mtk_mdp_try_fmt_mplane(ctx, f); + if (!fmt) { + mtk_mdp_err("[%d] try_fmt failed, type:%d", ctx->id, f->type); + return -EINVAL; + } + frame->fmt = fmt; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (vb2_is_streaming(vq)) { + dev_info(&ctx->mdp_dev->pdev->dev, "queue %d busy", f->type); + return -EBUSY; + } + + pix_mp = &f->fmt.pix_mp; + for (i = 0; i < frame->fmt->num_planes; i++) { + frame->payload[i] = pix_mp->plane_fmt[i].sizeimage; + frame->pitch[i] = pix_mp->plane_fmt[i].bytesperline; + } + + mtk_mdp_set_frame_size(frame, pix_mp->width, pix_mp->height); + if (V4L2_TYPE_IS_OUTPUT(f->type)) { + ctx->colorspace = pix_mp->colorspace; + ctx->xfer_func = pix_mp->xfer_func; + ctx->ycbcr_enc = pix_mp->ycbcr_enc; + ctx->quant = pix_mp->quantization; + } + + if (V4L2_TYPE_IS_OUTPUT(f->type)) + mtk_mdp_ctx_state_lock_set(ctx, MTK_MDP_SRC_FMT); + else + mtk_mdp_ctx_state_lock_set(ctx, MTK_MDP_DST_FMT); + + mtk_mdp_dbg(2, "[%d] type:%d, frame:%dx%d", ctx->id, f->type, + frame->width, frame->height); + + return 0; +} + +static int mtk_mdp_m2m_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *reqbufs) +{ + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + + if (reqbufs->count == 0) { + if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + mtk_mdp_ctx_state_lock_clear(ctx, MTK_MDP_SRC_FMT); + else + mtk_mdp_ctx_state_lock_clear(ctx, MTK_MDP_DST_FMT); + } + + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int mtk_mdp_m2m_streamon(struct file *file, void *fh, + enum v4l2_buf_type type) +{ + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + int ret; + + /* The source and target color format need to be set */ + if (V4L2_TYPE_IS_OUTPUT(type)) { + if (!mtk_mdp_ctx_state_is_set(ctx, MTK_MDP_SRC_FMT)) + return -EINVAL; + } else if (!mtk_mdp_ctx_state_is_set(ctx, MTK_MDP_DST_FMT)) { + return -EINVAL; + } + + if (!mtk_mdp_ctx_state_is_set(ctx, MTK_MDP_VPU_INIT)) { + ret = mtk_mdp_vpu_init(&ctx->vpu); + if (ret < 0) { + dev_err(&ctx->mdp_dev->pdev->dev, + "vpu init failed %d\n", + ret); + return -EINVAL; + } + mtk_mdp_ctx_state_lock_set(ctx, MTK_MDP_VPU_INIT); + } + + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static inline bool mtk_mdp_is_target_compose(u32 target) +{ + if (target == V4L2_SEL_TGT_COMPOSE_DEFAULT + || target == V4L2_SEL_TGT_COMPOSE_BOUNDS + || target == V4L2_SEL_TGT_COMPOSE) + return true; + return false; +} + +static inline bool mtk_mdp_is_target_crop(u32 target) +{ + if (target == V4L2_SEL_TGT_CROP_DEFAULT + || target == V4L2_SEL_TGT_CROP_BOUNDS + || target == V4L2_SEL_TGT_CROP) + return true; + return false; +} + +static int mtk_mdp_m2m_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct mtk_mdp_frame *frame; + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + bool valid = false; + + if (s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (mtk_mdp_is_target_compose(s->target)) + valid = true; + } else if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + if (mtk_mdp_is_target_crop(s->target)) + valid = true; + } + if (!valid) { + mtk_mdp_dbg(1, "[%d] invalid type:%d,%u", ctx->id, s->type, + s->target); + return -EINVAL; + } + + frame = mtk_mdp_ctx_get_frame(ctx, s->type); + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = 0; + s->r.top = 0; + s->r.width = frame->width; + s->r.height = frame->height; + return 0; + + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_CROP: + s->r.left = frame->crop.left; + s->r.top = frame->crop.top; + s->r.width = frame->crop.width; + s->r.height = frame->crop.height; + return 0; + } + + return -EINVAL; +} + +static int mtk_mdp_check_scaler_ratio(struct mtk_mdp_variant *var, int src_w, + int src_h, int dst_w, int dst_h, int rot) +{ + int tmp_w, tmp_h; + + if (rot == 90 || rot == 270) { + tmp_w = dst_h; + tmp_h = dst_w; + } else { + tmp_w = dst_w; + tmp_h = dst_h; + } + + if ((src_w / tmp_w) > var->h_scale_down_max || + (src_h / tmp_h) > var->v_scale_down_max || + (tmp_w / src_w) > var->h_scale_up_max || + (tmp_h / src_h) > var->v_scale_up_max) + return -EINVAL; + + return 0; +} + +static int mtk_mdp_m2m_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct mtk_mdp_frame *frame; + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh); + struct v4l2_rect new_r; + struct mtk_mdp_variant *variant = ctx->mdp_dev->variant; + int ret; + bool valid = false; + + if (s->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (s->target == V4L2_SEL_TGT_COMPOSE) + valid = true; + } else if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + if (s->target == V4L2_SEL_TGT_CROP) + valid = true; + } + if (!valid) { + mtk_mdp_dbg(1, "[%d] invalid type:%d,%u", ctx->id, s->type, + s->target); + return -EINVAL; + } + + new_r = s->r; + ret = mtk_mdp_try_crop(ctx, s->type, &new_r); + if (ret) + return ret; + + if (mtk_mdp_is_target_crop(s->target)) + frame = &ctx->s_frame; + else + frame = &ctx->d_frame; + + /* Check to see if scaling ratio is within supported range */ + if (mtk_mdp_ctx_state_is_set(ctx, MTK_MDP_DST_FMT | MTK_MDP_SRC_FMT)) { + if (V4L2_TYPE_IS_OUTPUT(s->type)) { + ret = mtk_mdp_check_scaler_ratio(variant, new_r.width, + new_r.height, ctx->d_frame.crop.width, + ctx->d_frame.crop.height, + ctx->ctrls.rotate->val); + } else { + ret = mtk_mdp_check_scaler_ratio(variant, + ctx->s_frame.crop.width, + ctx->s_frame.crop.height, new_r.width, + new_r.height, ctx->ctrls.rotate->val); + } + + if (ret) { + dev_info(&ctx->mdp_dev->pdev->dev, + "Out of scaler range"); + return -EINVAL; + } + } + + s->r = new_r; + frame->crop = new_r; + + return 0; +} + +static const struct v4l2_ioctl_ops mtk_mdp_m2m_ioctl_ops = { + .vidioc_querycap = mtk_mdp_m2m_querycap, + .vidioc_enum_fmt_vid_cap_mplane = mtk_mdp_m2m_enum_fmt_mplane_vid_cap, + .vidioc_enum_fmt_vid_out_mplane = mtk_mdp_m2m_enum_fmt_mplane_vid_out, + .vidioc_g_fmt_vid_cap_mplane = mtk_mdp_m2m_g_fmt_mplane, + .vidioc_g_fmt_vid_out_mplane = mtk_mdp_m2m_g_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = mtk_mdp_m2m_try_fmt_mplane, + .vidioc_try_fmt_vid_out_mplane = mtk_mdp_m2m_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = mtk_mdp_m2m_s_fmt_mplane, + .vidioc_s_fmt_vid_out_mplane = mtk_mdp_m2m_s_fmt_mplane, + .vidioc_reqbufs = mtk_mdp_m2m_reqbufs, + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf, + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, + .vidioc_streamon = mtk_mdp_m2m_streamon, + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, + .vidioc_g_selection = mtk_mdp_m2m_g_selection, + .vidioc_s_selection = mtk_mdp_m2m_s_selection +}; + +static int mtk_mdp_m2m_queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct mtk_mdp_ctx *ctx = priv; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->ops = &mtk_mdp_m2m_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + src_vq->dev = &ctx->mdp_dev->pdev->dev; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->ops = &mtk_mdp_m2m_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + dst_vq->dev = &ctx->mdp_dev->pdev->dev; + + return vb2_queue_init(dst_vq); +} + +static int mtk_mdp_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mtk_mdp_ctx *ctx = ctrl_to_ctx(ctrl); + struct mtk_mdp_dev *mdp = ctx->mdp_dev; + struct mtk_mdp_variant *variant = mdp->variant; + u32 state = MTK_MDP_DST_FMT | MTK_MDP_SRC_FMT; + int ret = 0; + + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) + return 0; + + switch (ctrl->id) { + case V4L2_CID_HFLIP: + ctx->hflip = ctrl->val; + break; + case V4L2_CID_VFLIP: + ctx->vflip = ctrl->val; + break; + case V4L2_CID_ROTATE: + if (mtk_mdp_ctx_state_is_set(ctx, state)) { + ret = mtk_mdp_check_scaler_ratio(variant, + ctx->s_frame.crop.width, + ctx->s_frame.crop.height, + ctx->d_frame.crop.width, + ctx->d_frame.crop.height, + ctx->ctrls.rotate->val); + + if (ret) + return -EINVAL; + } + + ctx->rotation = ctrl->val; + break; + case V4L2_CID_ALPHA_COMPONENT: + ctx->d_frame.alpha = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops mtk_mdp_ctrl_ops = { + .s_ctrl = mtk_mdp_s_ctrl, +}; + +static int mtk_mdp_ctrls_create(struct mtk_mdp_ctx *ctx) +{ + v4l2_ctrl_handler_init(&ctx->ctrl_handler, MTK_MDP_MAX_CTRL_NUM); + + ctx->ctrls.rotate = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &mtk_mdp_ctrl_ops, V4L2_CID_ROTATE, 0, 270, 90, 0); + ctx->ctrls.hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &mtk_mdp_ctrl_ops, + V4L2_CID_HFLIP, + 0, 1, 1, 0); + ctx->ctrls.vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &mtk_mdp_ctrl_ops, + V4L2_CID_VFLIP, + 0, 1, 1, 0); + ctx->ctrls.global_alpha = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &mtk_mdp_ctrl_ops, + V4L2_CID_ALPHA_COMPONENT, + 0, 255, 1, 0); + ctx->ctrls_rdy = ctx->ctrl_handler.error == 0; + + if (ctx->ctrl_handler.error) { + int err = ctx->ctrl_handler.error; + + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + dev_err(&ctx->mdp_dev->pdev->dev, + "Failed to create control handlers\n"); + return err; + } + + return 0; +} + +static void mtk_mdp_set_default_params(struct mtk_mdp_ctx *ctx) +{ + struct mtk_mdp_dev *mdp = ctx->mdp_dev; + struct mtk_mdp_frame *frame; + + frame = mtk_mdp_ctx_get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + frame->fmt = mtk_mdp_find_fmt_by_index(0, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + frame->width = mdp->variant->pix_min->org_w; + frame->height = mdp->variant->pix_min->org_h; + frame->payload[0] = frame->width * frame->height; + frame->payload[1] = frame->payload[0] / 2; + + frame = mtk_mdp_ctx_get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); + frame->fmt = mtk_mdp_find_fmt_by_index(0, + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); + frame->width = mdp->variant->pix_min->target_rot_dis_w; + frame->height = mdp->variant->pix_min->target_rot_dis_h; + frame->payload[0] = frame->width * frame->height; + frame->payload[1] = frame->payload[0] / 2; + +} + +static int mtk_mdp_m2m_open(struct file *file) +{ + struct mtk_mdp_dev *mdp = video_drvdata(file); + struct video_device *vfd = video_devdata(file); + struct mtk_mdp_ctx *ctx = NULL; + int ret; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + if (mutex_lock_interruptible(&mdp->lock)) { + ret = -ERESTARTSYS; + goto err_lock; + } + + mutex_init(&ctx->slock); + ctx->id = mdp->id_counter++; + v4l2_fh_init(&ctx->fh, vfd); + file->private_data = &ctx->fh; + ret = mtk_mdp_ctrls_create(ctx); + if (ret) + goto error_ctrls; + + /* Use separate control handler per file handle */ + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + v4l2_fh_add(&ctx->fh); + INIT_LIST_HEAD(&ctx->list); + + ctx->mdp_dev = mdp; + mtk_mdp_set_default_params(ctx); + + INIT_WORK(&ctx->work, mtk_mdp_m2m_worker); + ctx->m2m_ctx = v4l2_m2m_ctx_init(mdp->m2m_dev, ctx, + mtk_mdp_m2m_queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + dev_err(&mdp->pdev->dev, "Failed to initialize m2m context"); + ret = PTR_ERR(ctx->m2m_ctx); + goto error_m2m_ctx; + } + ctx->fh.m2m_ctx = ctx->m2m_ctx; + if (mdp->ctx_num++ == 0) { + ret = vpu_load_firmware(mdp->vpu_dev); + if (ret < 0) { + dev_err(&mdp->pdev->dev, + "vpu_load_firmware failed %d\n", ret); + goto err_load_vpu; + } + + ret = mtk_mdp_vpu_register(mdp->pdev); + if (ret < 0) { + dev_err(&mdp->pdev->dev, + "mdp_vpu register failed %d\n", ret); + goto err_load_vpu; + } + } + + list_add(&ctx->list, &mdp->ctx_list); + mutex_unlock(&mdp->lock); + + mtk_mdp_dbg(0, "%s [%d]", dev_name(&mdp->pdev->dev), ctx->id); + + return 0; + +err_load_vpu: + mdp->ctx_num--; + v4l2_m2m_ctx_release(ctx->m2m_ctx); +error_m2m_ctx: + v4l2_ctrl_handler_free(&ctx->ctrl_handler); +error_ctrls: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + mutex_unlock(&mdp->lock); +err_lock: + kfree(ctx); + + return ret; +} + +static int mtk_mdp_m2m_release(struct file *file) +{ + struct mtk_mdp_ctx *ctx = fh_to_ctx(file->private_data); + struct mtk_mdp_dev *mdp = ctx->mdp_dev; + + flush_workqueue(mdp->job_wq); + mutex_lock(&mdp->lock); + v4l2_m2m_ctx_release(ctx->m2m_ctx); + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + mtk_mdp_vpu_deinit(&ctx->vpu); + mdp->ctx_num--; + list_del_init(&ctx->list); + + mtk_mdp_dbg(0, "%s [%d]", dev_name(&mdp->pdev->dev), ctx->id); + + mutex_unlock(&mdp->lock); + kfree(ctx); + + return 0; +} + +static const struct v4l2_file_operations mtk_mdp_m2m_fops = { + .owner = THIS_MODULE, + .open = mtk_mdp_m2m_open, + .release = mtk_mdp_m2m_release, + .poll = v4l2_m2m_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = v4l2_m2m_fop_mmap, +}; + +static struct v4l2_m2m_ops mtk_mdp_m2m_ops = { + .device_run = mtk_mdp_m2m_device_run, + .job_abort = mtk_mdp_m2m_job_abort, +}; + +int mtk_mdp_register_m2m_device(struct mtk_mdp_dev *mdp) +{ + struct device *dev = &mdp->pdev->dev; + int ret; + + mdp->variant = &mtk_mdp_default_variant; + mdp->vdev.device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING; + mdp->vdev.fops = &mtk_mdp_m2m_fops; + mdp->vdev.ioctl_ops = &mtk_mdp_m2m_ioctl_ops; + mdp->vdev.release = video_device_release_empty; + mdp->vdev.lock = &mdp->lock; + mdp->vdev.vfl_dir = VFL_DIR_M2M; + mdp->vdev.v4l2_dev = &mdp->v4l2_dev; + snprintf(mdp->vdev.name, sizeof(mdp->vdev.name), "%s:m2m", + MTK_MDP_MODULE_NAME); + video_set_drvdata(&mdp->vdev, mdp); + + mdp->m2m_dev = v4l2_m2m_init(&mtk_mdp_m2m_ops); + if (IS_ERR(mdp->m2m_dev)) { + dev_err(dev, "failed to initialize v4l2-m2m device\n"); + ret = PTR_ERR(mdp->m2m_dev); + goto err_m2m_init; + } + + ret = video_register_device(&mdp->vdev, VFL_TYPE_GRABBER, 2); + if (ret) { + dev_err(dev, "failed to register video device\n"); + goto err_vdev_register; + } + + v4l2_info(&mdp->v4l2_dev, "driver registered as /dev/video%d", + mdp->vdev.num); + return 0; + +err_vdev_register: + v4l2_m2m_release(mdp->m2m_dev); +err_m2m_init: + video_device_release(&mdp->vdev); + + return ret; +} + +void mtk_mdp_unregister_m2m_device(struct mtk_mdp_dev *mdp) +{ + video_device_release(&mdp->vdev); + v4l2_m2m_release(mdp->m2m_dev); +} diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.h b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.h new file mode 100644 index 000000000000..45afd3655817 --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.h @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MTK_MDP_M2M_H__ +#define __MTK_MDP_M2M_H__ + +void mtk_mdp_ctx_state_lock_set(struct mtk_mdp_ctx *ctx, u32 state); +int mtk_mdp_register_m2m_device(struct mtk_mdp_dev *mdp); +void mtk_mdp_unregister_m2m_device(struct mtk_mdp_dev *mdp); + +#endif /* __MTK_MDP_M2M_H__ */ diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_regs.c b/drivers/media/platform/mtk-mdp/mtk_mdp_regs.c new file mode 100644 index 000000000000..86d57f380c97 --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_regs.c @@ -0,0 +1,156 @@ +/* + * Copyright (c) 2015-2016 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> + +#include "mtk_mdp_core.h" +#include "mtk_mdp_regs.h" + + +#define MDP_COLORFMT_PACK(VIDEO, PLANE, COPLANE, HF, VF, BITS, GROUP, SWAP, ID)\ + (((VIDEO) << 27) | ((PLANE) << 24) | ((COPLANE) << 22) |\ + ((HF) << 20) | ((VF) << 18) | ((BITS) << 8) | ((GROUP) << 6) |\ + ((SWAP) << 5) | ((ID) << 0)) + +enum MDP_COLOR_ENUM { + MDP_COLOR_UNKNOWN = 0, + MDP_COLOR_NV12 = MDP_COLORFMT_PACK(0, 2, 1, 1, 1, 8, 1, 0, 12), + MDP_COLOR_I420 = MDP_COLORFMT_PACK(0, 3, 0, 1, 1, 8, 1, 0, 8), + MDP_COLOR_YV12 = MDP_COLORFMT_PACK(0, 3, 0, 1, 1, 8, 1, 1, 8), + /* Mediatek proprietary format */ + MDP_COLOR_420_MT21 = MDP_COLORFMT_PACK(5, 2, 1, 1, 1, 256, 1, 0, 12), +}; + +static int32_t mtk_mdp_map_color_format(int v4l2_format) +{ + switch (v4l2_format) { + case V4L2_PIX_FMT_NV12M: + case V4L2_PIX_FMT_NV12: + return MDP_COLOR_NV12; + case V4L2_PIX_FMT_MT21C: + return MDP_COLOR_420_MT21; + case V4L2_PIX_FMT_YUV420M: + case V4L2_PIX_FMT_YUV420: + return MDP_COLOR_I420; + case V4L2_PIX_FMT_YVU420: + return MDP_COLOR_YV12; + } + + mtk_mdp_err("Unknown format 0x%x", v4l2_format); + + return MDP_COLOR_UNKNOWN; +} + +void mtk_mdp_hw_set_input_addr(struct mtk_mdp_ctx *ctx, + struct mtk_mdp_addr *addr) +{ + struct mdp_buffer *src_buf = &ctx->vpu.vsi->src_buffer; + int i; + + for (i = 0; i < ARRAY_SIZE(addr->addr); i++) + src_buf->addr_mva[i] = (uint64_t)addr->addr[i]; +} + +void mtk_mdp_hw_set_output_addr(struct mtk_mdp_ctx *ctx, + struct mtk_mdp_addr *addr) +{ + struct mdp_buffer *dst_buf = &ctx->vpu.vsi->dst_buffer; + int i; + + for (i = 0; i < ARRAY_SIZE(addr->addr); i++) + dst_buf->addr_mva[i] = (uint64_t)addr->addr[i]; +} + +void mtk_mdp_hw_set_in_size(struct mtk_mdp_ctx *ctx) +{ + struct mtk_mdp_frame *frame = &ctx->s_frame; + struct mdp_config *config = &ctx->vpu.vsi->src_config; + + /* Set input pixel offset */ + config->crop_x = frame->crop.left; + config->crop_y = frame->crop.top; + + /* Set input cropped size */ + config->crop_w = frame->crop.width; + config->crop_h = frame->crop.height; + + /* Set input original size */ + config->x = 0; + config->y = 0; + config->w = frame->width; + config->h = frame->height; +} + +void mtk_mdp_hw_set_in_image_format(struct mtk_mdp_ctx *ctx) +{ + unsigned int i; + struct mtk_mdp_frame *frame = &ctx->s_frame; + struct mdp_config *config = &ctx->vpu.vsi->src_config; + struct mdp_buffer *src_buf = &ctx->vpu.vsi->src_buffer; + + src_buf->plane_num = frame->fmt->num_comp; + config->format = mtk_mdp_map_color_format(frame->fmt->pixelformat); + config->w_stride = 0; /* MDP will calculate it by color format. */ + config->h_stride = 0; /* MDP will calculate it by color format. */ + + for (i = 0; i < src_buf->plane_num; i++) + src_buf->plane_size[i] = frame->payload[i]; +} + +void mtk_mdp_hw_set_out_size(struct mtk_mdp_ctx *ctx) +{ + struct mtk_mdp_frame *frame = &ctx->d_frame; + struct mdp_config *config = &ctx->vpu.vsi->dst_config; + + config->crop_x = frame->crop.left; + config->crop_y = frame->crop.top; + config->crop_w = frame->crop.width; + config->crop_h = frame->crop.height; + config->x = 0; + config->y = 0; + config->w = frame->width; + config->h = frame->height; +} + +void mtk_mdp_hw_set_out_image_format(struct mtk_mdp_ctx *ctx) +{ + unsigned int i; + struct mtk_mdp_frame *frame = &ctx->d_frame; + struct mdp_config *config = &ctx->vpu.vsi->dst_config; + struct mdp_buffer *dst_buf = &ctx->vpu.vsi->dst_buffer; + + dst_buf->plane_num = frame->fmt->num_comp; + config->format = mtk_mdp_map_color_format(frame->fmt->pixelformat); + config->w_stride = 0; /* MDP will calculate it by color format. */ + config->h_stride = 0; /* MDP will calculate it by color format. */ + for (i = 0; i < dst_buf->plane_num; i++) + dst_buf->plane_size[i] = frame->payload[i]; +} + +void mtk_mdp_hw_set_rotation(struct mtk_mdp_ctx *ctx) +{ + struct mdp_config_misc *misc = &ctx->vpu.vsi->misc; + + misc->orientation = ctx->ctrls.rotate->val; + misc->hflip = ctx->ctrls.hflip->val; + misc->vflip = ctx->ctrls.vflip->val; +} + +void mtk_mdp_hw_set_global_alpha(struct mtk_mdp_ctx *ctx) +{ + struct mdp_config_misc *misc = &ctx->vpu.vsi->misc; + + misc->alpha = ctx->ctrls.global_alpha->val; +} diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_regs.h b/drivers/media/platform/mtk-mdp/mtk_mdp_regs.h new file mode 100644 index 000000000000..42bd057e76cc --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_regs.h @@ -0,0 +1,31 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MTK_MDP_REGS_H__ +#define __MTK_MDP_REGS_H__ + + +void mtk_mdp_hw_set_input_addr(struct mtk_mdp_ctx *ctx, + struct mtk_mdp_addr *addr); +void mtk_mdp_hw_set_output_addr(struct mtk_mdp_ctx *ctx, + struct mtk_mdp_addr *addr); +void mtk_mdp_hw_set_in_size(struct mtk_mdp_ctx *ctx); +void mtk_mdp_hw_set_in_image_format(struct mtk_mdp_ctx *ctx); +void mtk_mdp_hw_set_out_size(struct mtk_mdp_ctx *ctx); +void mtk_mdp_hw_set_out_image_format(struct mtk_mdp_ctx *ctx); +void mtk_mdp_hw_set_rotation(struct mtk_mdp_ctx *ctx); +void mtk_mdp_hw_set_global_alpha(struct mtk_mdp_ctx *ctx); + + +#endif /* __MTK_MDP_REGS_H__ */ diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c b/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c new file mode 100644 index 000000000000..4893825aa5dd --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c @@ -0,0 +1,145 @@ +/* + * Copyright (c) 2015-2016 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mtk_mdp_core.h" +#include "mtk_mdp_vpu.h" +#include "mtk_vpu.h" + + +static inline struct mtk_mdp_ctx *vpu_to_ctx(struct mtk_mdp_vpu *vpu) +{ + return container_of(vpu, struct mtk_mdp_ctx, vpu); +} + +static void mtk_mdp_vpu_handle_init_ack(struct mdp_ipi_comm_ack *msg) +{ + struct mtk_mdp_vpu *vpu = (struct mtk_mdp_vpu *) + (unsigned long)msg->ap_inst; + + /* mapping VPU address to kernel virtual address */ + vpu->vsi = (struct mdp_process_vsi *) + vpu_mapping_dm_addr(vpu->pdev, msg->vpu_inst_addr); + vpu->inst_addr = msg->vpu_inst_addr; +} + +static void mtk_mdp_vpu_ipi_handler(void *data, unsigned int len, void *priv) +{ + unsigned int msg_id = *(unsigned int *)data; + struct mdp_ipi_comm_ack *msg = (struct mdp_ipi_comm_ack *)data; + struct mtk_mdp_vpu *vpu = (struct mtk_mdp_vpu *) + (unsigned long)msg->ap_inst; + struct mtk_mdp_ctx *ctx; + + vpu->failure = msg->status; + if (!vpu->failure) { + switch (msg_id) { + case VPU_MDP_INIT_ACK: + mtk_mdp_vpu_handle_init_ack(data); + break; + case VPU_MDP_DEINIT_ACK: + case VPU_MDP_PROCESS_ACK: + break; + default: + ctx = vpu_to_ctx(vpu); + dev_err(&ctx->mdp_dev->pdev->dev, + "handle unknown ipi msg:0x%x\n", + msg_id); + break; + } + } else { + ctx = vpu_to_ctx(vpu); + mtk_mdp_dbg(0, "[%d]:msg 0x%x, failure:%d", ctx->id, + msg_id, vpu->failure); + } +} + +int mtk_mdp_vpu_register(struct platform_device *pdev) +{ + struct mtk_mdp_dev *mdp = platform_get_drvdata(pdev); + int err; + + err = vpu_ipi_register(mdp->vpu_dev, IPI_MDP, + mtk_mdp_vpu_ipi_handler, "mdp_vpu", NULL); + if (err) + dev_err(&mdp->pdev->dev, + "vpu_ipi_registration fail status=%d\n", err); + + return err; +} + +static int mtk_mdp_vpu_send_msg(void *msg, int len, struct mtk_mdp_vpu *vpu, + int id) +{ + struct mtk_mdp_ctx *ctx = vpu_to_ctx(vpu); + int err; + + if (!vpu->pdev) { + mtk_mdp_dbg(1, "[%d]:vpu pdev is NULL", ctx->id); + return -EINVAL; + } + + mutex_lock(&ctx->mdp_dev->vpulock); + err = vpu_ipi_send(vpu->pdev, (enum ipi_id)id, msg, len); + if (err) + dev_err(&ctx->mdp_dev->pdev->dev, + "vpu_ipi_send fail status %d\n", err); + mutex_unlock(&ctx->mdp_dev->vpulock); + + return err; +} + +static int mtk_mdp_vpu_send_ap_ipi(struct mtk_mdp_vpu *vpu, uint32_t msg_id) +{ + int err; + struct mdp_ipi_comm msg; + + msg.msg_id = msg_id; + msg.ipi_id = IPI_MDP; + msg.vpu_inst_addr = vpu->inst_addr; + msg.ap_inst = (unsigned long)vpu; + err = mtk_mdp_vpu_send_msg((void *)&msg, sizeof(msg), vpu, IPI_MDP); + if (!err && vpu->failure) + err = -EINVAL; + + return err; +} + +int mtk_mdp_vpu_init(struct mtk_mdp_vpu *vpu) +{ + int err; + struct mdp_ipi_init msg; + struct mtk_mdp_ctx *ctx = vpu_to_ctx(vpu); + + vpu->pdev = ctx->mdp_dev->vpu_dev; + + msg.msg_id = AP_MDP_INIT; + msg.ipi_id = IPI_MDP; + msg.ap_inst = (unsigned long)vpu; + err = mtk_mdp_vpu_send_msg((void *)&msg, sizeof(msg), vpu, IPI_MDP); + if (!err && vpu->failure) + err = -EINVAL; + + return err; +} + +int mtk_mdp_vpu_deinit(struct mtk_mdp_vpu *vpu) +{ + return mtk_mdp_vpu_send_ap_ipi(vpu, AP_MDP_DEINIT); +} + +int mtk_mdp_vpu_process(struct mtk_mdp_vpu *vpu) +{ + return mtk_mdp_vpu_send_ap_ipi(vpu, AP_MDP_PROCESS); +} diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.h b/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.h new file mode 100644 index 000000000000..df4bddaa438e --- /dev/null +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_vpu.h @@ -0,0 +1,41 @@ +/* + * Copyright (c) 2015-2016 MediaTek Inc. + * Author: Houlong Wei <houlong.wei@mediatek.com> + * Ming Hsiu Tsai <minghsiu.tsai@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MTK_MDP_VPU_H__ +#define __MTK_MDP_VPU_H__ + +#include "mtk_mdp_ipi.h" + + +/** + * struct mtk_mdp_vpu - VPU instance for MDP + * @pdev : pointer to the VPU platform device + * @inst_addr : VPU MDP instance address + * @failure : VPU execution result status + * @vsi : VPU shared information + */ +struct mtk_mdp_vpu { + struct platform_device *pdev; + uint32_t inst_addr; + int32_t failure; + struct mdp_process_vsi *vsi; +}; + +int mtk_mdp_vpu_register(struct platform_device *pdev); +int mtk_mdp_vpu_init(struct mtk_mdp_vpu *vpu); +int mtk_mdp_vpu_deinit(struct mtk_mdp_vpu *vpu); +int mtk_mdp_vpu_process(struct mtk_mdp_vpu *vpu); + +#endif /* __MTK_MDP_VPU_H__ */ diff --git a/drivers/media/platform/mtk-vcodec/Makefile b/drivers/media/platform/mtk-vcodec/Makefile index dc5cb006d600..852d9697ccfa 100644 --- a/drivers/media/platform/mtk-vcodec/Makefile +++ b/drivers/media/platform/mtk-vcodec/Makefile @@ -1,7 +1,16 @@ - -obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec-enc.o mtk-vcodec-common.o - +obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec-dec.o \ + mtk-vcodec-enc.o \ + mtk-vcodec-common.o + +mtk-vcodec-dec-y := vdec/vdec_h264_if.o \ + vdec/vdec_vp8_if.o \ + vdec/vdec_vp9_if.o \ + mtk_vcodec_dec_drv.o \ + vdec_drv_if.o \ + vdec_vpu_if.o \ + mtk_vcodec_dec.o \ + mtk_vcodec_dec_pm.o \ mtk-vcodec-enc-y := venc/venc_vp8_if.o \ diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c new file mode 100644 index 000000000000..074659227864 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c @@ -0,0 +1,1451 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <media/v4l2-event.h> +#include <media/v4l2-mem2mem.h> +#include <media/videobuf2-dma-contig.h> + +#include "mtk_vcodec_drv.h" +#include "mtk_vcodec_dec.h" +#include "mtk_vcodec_intr.h" +#include "mtk_vcodec_util.h" +#include "vdec_drv_if.h" +#include "mtk_vcodec_dec_pm.h" + +#define OUT_FMT_IDX 0 +#define CAP_FMT_IDX 3 + +#define MTK_VDEC_MIN_W 64U +#define MTK_VDEC_MIN_H 64U +#define DFT_CFG_WIDTH MTK_VDEC_MIN_W +#define DFT_CFG_HEIGHT MTK_VDEC_MIN_H + +static struct mtk_video_fmt mtk_video_formats[] = { + { + .fourcc = V4L2_PIX_FMT_H264, + .type = MTK_FMT_DEC, + .num_planes = 1, + }, + { + .fourcc = V4L2_PIX_FMT_VP8, + .type = MTK_FMT_DEC, + .num_planes = 1, + }, + { + .fourcc = V4L2_PIX_FMT_VP9, + .type = MTK_FMT_DEC, + .num_planes = 1, + }, + { + .fourcc = V4L2_PIX_FMT_MT21C, + .type = MTK_FMT_FRAME, + .num_planes = 2, + }, +}; + +static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = { + { + .fourcc = V4L2_PIX_FMT_H264, + .stepwise = { MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16, + MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 }, + }, + { + .fourcc = V4L2_PIX_FMT_VP8, + .stepwise = { MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16, + MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 }, + }, + { + .fourcc = V4L2_PIX_FMT_VP9, + .stepwise = { MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16, + MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16 }, + }, +}; + +#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes) +#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats) + +static struct mtk_video_fmt *mtk_vdec_find_format(struct v4l2_format *f) +{ + struct mtk_video_fmt *fmt; + unsigned int k; + + for (k = 0; k < NUM_FORMATS; k++) { + fmt = &mtk_video_formats[k]; + if (fmt->fourcc == f->fmt.pix_mp.pixelformat) + return fmt; + } + + return NULL; +} + +static struct mtk_q_data *mtk_vdec_get_q_data(struct mtk_vcodec_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return &ctx->q_data[MTK_Q_DATA_SRC]; + + return &ctx->q_data[MTK_Q_DATA_DST]; +} + +/* + * This function tries to clean all display buffers, the buffers will return + * in display order. + * Note the buffers returned from codec driver may still be in driver's + * reference list. + */ +static struct vb2_buffer *get_display_buffer(struct mtk_vcodec_ctx *ctx) +{ + struct vdec_fb *disp_frame_buffer = NULL; + struct mtk_video_dec_buf *dstbuf; + + mtk_v4l2_debug(3, "[%d]", ctx->id); + if (vdec_if_get_param(ctx, + GET_PARAM_DISP_FRAME_BUFFER, + &disp_frame_buffer)) { + mtk_v4l2_err("[%d]Cannot get param : GET_PARAM_DISP_FRAME_BUFFER", + ctx->id); + return NULL; + } + + if (disp_frame_buffer == NULL) { + mtk_v4l2_debug(3, "No display frame buffer"); + return NULL; + } + + dstbuf = container_of(disp_frame_buffer, struct mtk_video_dec_buf, + frame_buffer); + mutex_lock(&ctx->lock); + if (dstbuf->used) { + vb2_set_plane_payload(&dstbuf->vb.vb2_buf, 0, + ctx->picinfo.y_bs_sz); + vb2_set_plane_payload(&dstbuf->vb.vb2_buf, 1, + ctx->picinfo.c_bs_sz); + + dstbuf->ready_to_display = true; + + mtk_v4l2_debug(2, + "[%d]status=%x queue id=%d to done_list %d", + ctx->id, disp_frame_buffer->status, + dstbuf->vb.vb2_buf.index, + dstbuf->queued_in_vb2); + + v4l2_m2m_buf_done(&dstbuf->vb, VB2_BUF_STATE_DONE); + ctx->decoded_frame_cnt++; + } + mutex_unlock(&ctx->lock); + return &dstbuf->vb.vb2_buf; +} + +/* + * This function tries to clean all capture buffers that are not used as + * reference buffers by codec driver any more + * In this case, we need re-queue buffer to vb2 buffer if user space + * already returns this buffer to v4l2 or this buffer is just the output of + * previous sps/pps/resolution change decode, or do nothing if user + * space still owns this buffer + */ +static struct vb2_buffer *get_free_buffer(struct mtk_vcodec_ctx *ctx) +{ + struct mtk_video_dec_buf *dstbuf; + struct vdec_fb *free_frame_buffer = NULL; + + if (vdec_if_get_param(ctx, + GET_PARAM_FREE_FRAME_BUFFER, + &free_frame_buffer)) { + mtk_v4l2_err("[%d] Error!! Cannot get param", ctx->id); + return NULL; + } + if (free_frame_buffer == NULL) { + mtk_v4l2_debug(3, " No free frame buffer"); + return NULL; + } + + mtk_v4l2_debug(3, "[%d] tmp_frame_addr = 0x%p", + ctx->id, free_frame_buffer); + + dstbuf = container_of(free_frame_buffer, struct mtk_video_dec_buf, + frame_buffer); + + mutex_lock(&ctx->lock); + if (dstbuf->used) { + if ((dstbuf->queued_in_vb2) && + (dstbuf->queued_in_v4l2) && + (free_frame_buffer->status == FB_ST_FREE)) { + /* + * After decode sps/pps or non-display buffer, we don't + * need to return capture buffer to user space, but + * just re-queue this capture buffer to vb2 queue. + * This reduce overheads that dq/q unused capture + * buffer. In this case, queued_in_vb2 = true. + */ + mtk_v4l2_debug(2, + "[%d]status=%x queue id=%d to rdy_queue %d", + ctx->id, free_frame_buffer->status, + dstbuf->vb.vb2_buf.index, + dstbuf->queued_in_vb2); + v4l2_m2m_buf_queue(ctx->m2m_ctx, &dstbuf->vb); + } else if ((dstbuf->queued_in_vb2 == false) && + (dstbuf->queued_in_v4l2 == true)) { + /* + * If buffer in v4l2 driver but not in vb2 queue yet, + * and we get this buffer from free_list, it means + * that codec driver do not use this buffer as + * reference buffer anymore. We should q buffer to vb2 + * queue, so later work thread could get this buffer + * for decode. In this case, queued_in_vb2 = false + * means this buffer is not from previous decode + * output. + */ + mtk_v4l2_debug(2, + "[%d]status=%x queue id=%d to rdy_queue", + ctx->id, free_frame_buffer->status, + dstbuf->vb.vb2_buf.index); + v4l2_m2m_buf_queue(ctx->m2m_ctx, &dstbuf->vb); + dstbuf->queued_in_vb2 = true; + } else { + /* + * Codec driver do not need to reference this capture + * buffer and this buffer is not in v4l2 driver. + * Then we don't need to do any thing, just add log when + * we need to debug buffer flow. + * When this buffer q from user space, it could + * directly q to vb2 buffer + */ + mtk_v4l2_debug(3, "[%d]status=%x err queue id=%d %d %d", + ctx->id, free_frame_buffer->status, + dstbuf->vb.vb2_buf.index, + dstbuf->queued_in_vb2, + dstbuf->queued_in_v4l2); + } + dstbuf->used = false; + } + mutex_unlock(&ctx->lock); + return &dstbuf->vb.vb2_buf; +} + +static void clean_display_buffer(struct mtk_vcodec_ctx *ctx) +{ + struct vb2_buffer *framptr; + + do { + framptr = get_display_buffer(ctx); + } while (framptr); +} + +static void clean_free_buffer(struct mtk_vcodec_ctx *ctx) +{ + struct vb2_buffer *framptr; + + do { + framptr = get_free_buffer(ctx); + } while (framptr); +} + +static void mtk_vdec_queue_res_chg_event(struct mtk_vcodec_ctx *ctx) +{ + static const struct v4l2_event ev_src_ch = { + .type = V4L2_EVENT_SOURCE_CHANGE, + .u.src_change.changes = + V4L2_EVENT_SRC_CH_RESOLUTION, + }; + + mtk_v4l2_debug(1, "[%d]", ctx->id); + v4l2_event_queue_fh(&ctx->fh, &ev_src_ch); +} + +static void mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx) +{ + bool res_chg; + int ret = 0; + + ret = vdec_if_decode(ctx, NULL, NULL, &res_chg); + if (ret) + mtk_v4l2_err("DecodeFinal failed, ret=%d", ret); + + clean_display_buffer(ctx); + clean_free_buffer(ctx); +} + +static void mtk_vdec_pic_info_update(struct mtk_vcodec_ctx *ctx) +{ + unsigned int dpbsize = 0; + int ret; + + if (vdec_if_get_param(ctx, + GET_PARAM_PIC_INFO, + &ctx->last_decoded_picinfo)) { + mtk_v4l2_err("[%d]Error!! Cannot get param : GET_PARAM_PICTURE_INFO ERR", + ctx->id); + return; + } + + if (ctx->last_decoded_picinfo.pic_w == 0 || + ctx->last_decoded_picinfo.pic_h == 0 || + ctx->last_decoded_picinfo.buf_w == 0 || + ctx->last_decoded_picinfo.buf_h == 0) { + mtk_v4l2_err("Cannot get correct pic info"); + return; + } + + if ((ctx->last_decoded_picinfo.pic_w == ctx->picinfo.pic_w) || + (ctx->last_decoded_picinfo.pic_h == ctx->picinfo.pic_h)) + return; + + mtk_v4l2_debug(1, + "[%d]-> new(%d,%d), old(%d,%d), real(%d,%d)", + ctx->id, ctx->last_decoded_picinfo.pic_w, + ctx->last_decoded_picinfo.pic_h, + ctx->picinfo.pic_w, ctx->picinfo.pic_h, + ctx->last_decoded_picinfo.buf_w, + ctx->last_decoded_picinfo.buf_h); + + ret = vdec_if_get_param(ctx, GET_PARAM_DPB_SIZE, &dpbsize); + if (dpbsize == 0) + mtk_v4l2_err("Incorrect dpb size, ret=%d", ret); + + ctx->dpb_size = dpbsize; +} + +static void mtk_vdec_worker(struct work_struct *work) +{ + struct mtk_vcodec_ctx *ctx = container_of(work, struct mtk_vcodec_ctx, + decode_work); + struct mtk_vcodec_dev *dev = ctx->dev; + struct vb2_buffer *src_buf, *dst_buf; + struct mtk_vcodec_mem buf; + struct vdec_fb *pfb; + bool res_chg = false; + int ret; + struct mtk_video_dec_buf *dst_buf_info, *src_buf_info; + struct vb2_v4l2_buffer *dst_vb2_v4l2, *src_vb2_v4l2; + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + if (src_buf == NULL) { + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); + mtk_v4l2_debug(1, "[%d] src_buf empty!!", ctx->id); + return; + } + + dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + if (dst_buf == NULL) { + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); + mtk_v4l2_debug(1, "[%d] dst_buf empty!!", ctx->id); + return; + } + + src_vb2_v4l2 = container_of(src_buf, struct vb2_v4l2_buffer, vb2_buf); + src_buf_info = container_of(src_vb2_v4l2, struct mtk_video_dec_buf, vb); + + dst_vb2_v4l2 = container_of(dst_buf, struct vb2_v4l2_buffer, vb2_buf); + dst_buf_info = container_of(dst_vb2_v4l2, struct mtk_video_dec_buf, vb); + + buf.va = vb2_plane_vaddr(src_buf, 0); + buf.dma_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0); + buf.size = (size_t)src_buf->planes[0].bytesused; + if (!buf.va) { + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); + mtk_v4l2_err("[%d] id=%d src_addr is NULL!!", + ctx->id, src_buf->index); + return; + } + + pfb = &dst_buf_info->frame_buffer; + pfb->base_y.va = vb2_plane_vaddr(dst_buf, 0); + pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0); + pfb->base_y.size = ctx->picinfo.y_bs_sz + ctx->picinfo.y_len_sz; + + pfb->base_c.va = vb2_plane_vaddr(dst_buf, 1); + pfb->base_c.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 1); + pfb->base_c.size = ctx->picinfo.c_bs_sz + ctx->picinfo.c_len_sz; + pfb->status = 0; + mtk_v4l2_debug(3, "===>[%d] vdec_if_decode() ===>", ctx->id); + mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p", + ctx->id, buf.va, &buf.dma_addr, buf.size, src_buf); + + mtk_v4l2_debug(3, + "id=%d Framebuf pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx", + dst_buf->index, pfb, + pfb->base_y.va, &pfb->base_y.dma_addr, + &pfb->base_c.dma_addr, pfb->base_y.size); + + if (src_buf_info->lastframe) { + /* update src buf status */ + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + src_buf_info->lastframe = false; + v4l2_m2m_buf_done(&src_buf_info->vb, VB2_BUF_STATE_DONE); + + /* update dst buf status */ + dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + dst_buf_info->used = false; + + vdec_if_decode(ctx, NULL, NULL, &res_chg); + clean_display_buffer(ctx); + vb2_set_plane_payload(&dst_buf_info->vb.vb2_buf, 0, 0); + vb2_set_plane_payload(&dst_buf_info->vb.vb2_buf, 1, 0); + v4l2_m2m_buf_done(&dst_buf_info->vb, VB2_BUF_STATE_DONE); + clean_free_buffer(ctx); + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); + return; + } + dst_buf_info->vb.vb2_buf.timestamp + = src_buf_info->vb.vb2_buf.timestamp; + dst_buf_info->vb.timecode + = src_buf_info->vb.timecode; + mutex_lock(&ctx->lock); + dst_buf_info->used = true; + mutex_unlock(&ctx->lock); + src_buf_info->used = true; + + ret = vdec_if_decode(ctx, &buf, pfb, &res_chg); + + if (ret) { + mtk_v4l2_err( + " <===[%d], src_buf[%d]%d sz=0x%zx pts=%llu dst_buf[%d] vdec_if_decode() ret=%d res_chg=%d===>", + ctx->id, + src_buf->index, + src_buf_info->lastframe, + buf.size, + src_buf_info->vb.vb2_buf.timestamp, + dst_buf->index, + ret, res_chg); + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + v4l2_m2m_buf_done(&src_buf_info->vb, VB2_BUF_STATE_ERROR); + } else if (res_chg == false) { + /* + * we only return src buffer with VB2_BUF_STATE_DONE + * when decode success without resolution change + */ + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + v4l2_m2m_buf_done(&src_buf_info->vb, VB2_BUF_STATE_DONE); + } + + dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + clean_display_buffer(ctx); + clean_free_buffer(ctx); + + if (!ret && res_chg) { + mtk_vdec_pic_info_update(ctx); + /* + * On encountering a resolution change in the stream. + * The driver must first process and decode all + * remaining buffers from before the resolution change + * point, so call flush decode here + */ + mtk_vdec_flush_decoder(ctx); + /* + * After all buffers containing decoded frames from + * before the resolution change point ready to be + * dequeued on the CAPTURE queue, the driver sends a + * V4L2_EVENT_SOURCE_CHANGE event for source change + * type V4L2_EVENT_SRC_CH_RESOLUTION + */ + mtk_vdec_queue_res_chg_event(ctx); + } + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); +} + +void mtk_vdec_unlock(struct mtk_vcodec_ctx *ctx) +{ + mutex_unlock(&ctx->dev->dec_mutex); +} + +void mtk_vdec_lock(struct mtk_vcodec_ctx *ctx) +{ + mutex_lock(&ctx->dev->dec_mutex); +} + +void mtk_vcodec_dec_release(struct mtk_vcodec_ctx *ctx) +{ + vdec_if_deinit(ctx); + ctx->state = MTK_STATE_FREE; +} + +void mtk_vcodec_dec_set_default_params(struct mtk_vcodec_ctx *ctx) +{ + struct mtk_q_data *q_data; + + ctx->m2m_ctx->q_lock = &ctx->dev->dev_mutex; + ctx->fh.m2m_ctx = ctx->m2m_ctx; + ctx->fh.ctrl_handler = &ctx->ctrl_hdl; + INIT_WORK(&ctx->decode_work, mtk_vdec_worker); + ctx->colorspace = V4L2_COLORSPACE_REC709; + ctx->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + ctx->quantization = V4L2_QUANTIZATION_DEFAULT; + ctx->xfer_func = V4L2_XFER_FUNC_DEFAULT; + + q_data = &ctx->q_data[MTK_Q_DATA_SRC]; + memset(q_data, 0, sizeof(struct mtk_q_data)); + q_data->visible_width = DFT_CFG_WIDTH; + q_data->visible_height = DFT_CFG_HEIGHT; + q_data->fmt = &mtk_video_formats[OUT_FMT_IDX]; + q_data->field = V4L2_FIELD_NONE; + + q_data->sizeimage[0] = DFT_CFG_WIDTH * DFT_CFG_HEIGHT; + q_data->bytesperline[0] = 0; + + q_data = &ctx->q_data[MTK_Q_DATA_DST]; + memset(q_data, 0, sizeof(struct mtk_q_data)); + q_data->visible_width = DFT_CFG_WIDTH; + q_data->visible_height = DFT_CFG_HEIGHT; + q_data->coded_width = DFT_CFG_WIDTH; + q_data->coded_height = DFT_CFG_HEIGHT; + q_data->fmt = &mtk_video_formats[CAP_FMT_IDX]; + q_data->field = V4L2_FIELD_NONE; + + v4l_bound_align_image(&q_data->coded_width, + MTK_VDEC_MIN_W, + MTK_VDEC_MAX_W, 4, + &q_data->coded_height, + MTK_VDEC_MIN_H, + MTK_VDEC_MAX_H, 5, 6); + + q_data->sizeimage[0] = q_data->coded_width * q_data->coded_height; + q_data->bytesperline[0] = q_data->coded_width; + q_data->sizeimage[1] = q_data->sizeimage[0] / 2; + q_data->bytesperline[1] = q_data->coded_width; +} + +static int vidioc_vdec_qbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv); + struct vb2_queue *vq; + struct vb2_buffer *vb; + struct mtk_video_dec_buf *mtkbuf; + struct vb2_v4l2_buffer *vb2_v4l2; + + if (ctx->state == MTK_STATE_ABORT) { + mtk_v4l2_err("[%d] Call on QBUF after unrecoverable error", + ctx->id); + return -EIO; + } + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, buf->type); + if (buf->index >= vq->num_buffers) { + mtk_v4l2_debug(1, "buffer index %d out of range", buf->index); + return -EINVAL; + } + vb = vq->bufs[buf->index]; + vb2_v4l2 = container_of(vb, struct vb2_v4l2_buffer, vb2_buf); + mtkbuf = container_of(vb2_v4l2, struct mtk_video_dec_buf, vb); + + if ((buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) && + (buf->m.planes[0].bytesused == 0)) { + mtkbuf->lastframe = true; + mtk_v4l2_debug(1, "[%d] (%d) id=%d lastframe=%d (%d,%d, %d) vb=%p", + ctx->id, buf->type, buf->index, + mtkbuf->lastframe, buf->bytesused, + buf->m.planes[0].bytesused, buf->length, + vb); + } + + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_vdec_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv); + + if (ctx->state == MTK_STATE_ABORT) { + mtk_v4l2_err("[%d] Call on DQBUF after unrecoverable error", + ctx->id); + return -EIO; + } + + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_vdec_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, MTK_VCODEC_DEC_NAME, sizeof(cap->driver)); + strlcpy(cap->bus_info, MTK_PLATFORM_STR, sizeof(cap->bus_info)); + strlcpy(cap->card, MTK_PLATFORM_STR, sizeof(cap->card)); + + return 0; +} + +static int vidioc_vdec_subscribe_evt(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_EOS: + return v4l2_event_subscribe(fh, sub, 2, NULL); + case V4L2_EVENT_SOURCE_CHANGE: + return v4l2_src_change_event_subscribe(fh, sub); + default: + return v4l2_ctrl_subscribe_event(fh, sub); + } +} + +static int vidioc_try_fmt(struct v4l2_format *f, struct mtk_video_fmt *fmt) +{ + struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; + int i; + + pix_fmt_mp->field = V4L2_FIELD_NONE; + + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + pix_fmt_mp->num_planes = 1; + pix_fmt_mp->plane_fmt[0].bytesperline = 0; + } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + int tmp_w, tmp_h; + + pix_fmt_mp->height = clamp(pix_fmt_mp->height, + MTK_VDEC_MIN_H, + MTK_VDEC_MAX_H); + pix_fmt_mp->width = clamp(pix_fmt_mp->width, + MTK_VDEC_MIN_W, + MTK_VDEC_MAX_W); + + /* + * Find next closer width align 64, heign align 64, size align + * 64 rectangle + * Note: This only get default value, the real HW needed value + * only available when ctx in MTK_STATE_HEADER state + */ + tmp_w = pix_fmt_mp->width; + tmp_h = pix_fmt_mp->height; + v4l_bound_align_image(&pix_fmt_mp->width, + MTK_VDEC_MIN_W, + MTK_VDEC_MAX_W, 6, + &pix_fmt_mp->height, + MTK_VDEC_MIN_H, + MTK_VDEC_MAX_H, 6, 9); + + if (pix_fmt_mp->width < tmp_w && + (pix_fmt_mp->width + 64) <= MTK_VDEC_MAX_W) + pix_fmt_mp->width += 64; + if (pix_fmt_mp->height < tmp_h && + (pix_fmt_mp->height + 64) <= MTK_VDEC_MAX_H) + pix_fmt_mp->height += 64; + + mtk_v4l2_debug(0, + "before resize width=%d, height=%d, after resize width=%d, height=%d, sizeimage=%d", + tmp_w, tmp_h, pix_fmt_mp->width, + pix_fmt_mp->height, + pix_fmt_mp->width * pix_fmt_mp->height); + + pix_fmt_mp->num_planes = fmt->num_planes; + pix_fmt_mp->plane_fmt[0].sizeimage = + pix_fmt_mp->width * pix_fmt_mp->height; + pix_fmt_mp->plane_fmt[0].bytesperline = pix_fmt_mp->width; + + if (pix_fmt_mp->num_planes == 2) { + pix_fmt_mp->plane_fmt[1].sizeimage = + (pix_fmt_mp->width * pix_fmt_mp->height) / 2; + pix_fmt_mp->plane_fmt[1].bytesperline = + pix_fmt_mp->width; + } + } + + for (i = 0; i < pix_fmt_mp->num_planes; i++) + memset(&(pix_fmt_mp->plane_fmt[i].reserved[0]), 0x0, + sizeof(pix_fmt_mp->plane_fmt[0].reserved)); + + pix_fmt_mp->flags = 0; + memset(&pix_fmt_mp->reserved, 0x0, sizeof(pix_fmt_mp->reserved)); + return 0; +} + +static int vidioc_try_fmt_vid_cap_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct mtk_video_fmt *fmt; + + fmt = mtk_vdec_find_format(f); + if (!fmt) { + f->fmt.pix.pixelformat = mtk_video_formats[CAP_FMT_IDX].fourcc; + fmt = mtk_vdec_find_format(f); + } + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_try_fmt_vid_out_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; + struct mtk_video_fmt *fmt; + + fmt = mtk_vdec_find_format(f); + if (!fmt) { + f->fmt.pix.pixelformat = mtk_video_formats[OUT_FMT_IDX].fourcc; + fmt = mtk_vdec_find_format(f); + } + + if (pix_fmt_mp->plane_fmt[0].sizeimage == 0) { + mtk_v4l2_err("sizeimage of output format must be given"); + return -EINVAL; + } + + return vidioc_try_fmt(f, fmt); +} + +static int vidioc_vdec_g_selection(struct file *file, void *priv, + struct v4l2_selection *s) +{ + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv); + struct mtk_q_data *q_data; + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + q_data = &ctx->q_data[MTK_Q_DATA_DST]; + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + s->r.left = 0; + s->r.top = 0; + s->r.width = ctx->picinfo.pic_w; + s->r.height = ctx->picinfo.pic_h; + break; + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + s->r.left = 0; + s->r.top = 0; + s->r.width = ctx->picinfo.buf_w; + s->r.height = ctx->picinfo.buf_h; + break; + case V4L2_SEL_TGT_COMPOSE: + if (vdec_if_get_param(ctx, GET_PARAM_CROP_INFO, &(s->r))) { + /* set to default value if header info not ready yet*/ + s->r.left = 0; + s->r.top = 0; + s->r.width = q_data->visible_width; + s->r.height = q_data->visible_height; + } + break; + default: + return -EINVAL; + } + + if (ctx->state < MTK_STATE_HEADER) { + /* set to default value if header info not ready yet*/ + s->r.left = 0; + s->r.top = 0; + s->r.width = q_data->visible_width; + s->r.height = q_data->visible_height; + return 0; + } + + return 0; +} + +static int vidioc_vdec_s_selection(struct file *file, void *priv, + struct v4l2_selection *s) +{ + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv); + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + switch (s->target) { + case V4L2_SEL_TGT_COMPOSE: + s->r.left = 0; + s->r.top = 0; + s->r.width = ctx->picinfo.pic_w; + s->r.height = ctx->picinfo.pic_h; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vidioc_vdec_s_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv); + struct v4l2_pix_format_mplane *pix_mp; + struct mtk_q_data *q_data; + int ret = 0; + struct mtk_video_fmt *fmt; + + mtk_v4l2_debug(3, "[%d]", ctx->id); + + q_data = mtk_vdec_get_q_data(ctx, f->type); + if (!q_data) + return -EINVAL; + + pix_mp = &f->fmt.pix_mp; + if ((f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) && + vb2_is_busy(&ctx->m2m_ctx->out_q_ctx.q)) { + mtk_v4l2_err("out_q_ctx buffers already requested"); + ret = -EBUSY; + } + + if ((f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && + vb2_is_busy(&ctx->m2m_ctx->cap_q_ctx.q)) { + mtk_v4l2_err("cap_q_ctx buffers already requested"); + ret = -EBUSY; + } + + fmt = mtk_vdec_find_format(f); + if (fmt == NULL) { + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + f->fmt.pix.pixelformat = + mtk_video_formats[OUT_FMT_IDX].fourcc; + fmt = mtk_vdec_find_format(f); + } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + f->fmt.pix.pixelformat = + mtk_video_formats[CAP_FMT_IDX].fourcc; + fmt = mtk_vdec_find_format(f); + } + } + + q_data->fmt = fmt; + vidioc_try_fmt(f, q_data->fmt); + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + q_data->sizeimage[0] = pix_mp->plane_fmt[0].sizeimage; + q_data->coded_width = pix_mp->width; + q_data->coded_height = pix_mp->height; + + ctx->colorspace = f->fmt.pix_mp.colorspace; + ctx->ycbcr_enc = f->fmt.pix_mp.ycbcr_enc; + ctx->quantization = f->fmt.pix_mp.quantization; + ctx->xfer_func = f->fmt.pix_mp.xfer_func; + + if (ctx->state == MTK_STATE_FREE) { + ret = vdec_if_init(ctx, q_data->fmt->fourcc); + if (ret) { + mtk_v4l2_err("[%d]: vdec_if_init() fail ret=%d", + ctx->id, ret); + return -EINVAL; + } + ctx->state = MTK_STATE_INIT; + } + } + + return 0; +} + +static int vidioc_enum_framesizes(struct file *file, void *priv, + struct v4l2_frmsizeenum *fsize) +{ + int i = 0; + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv); + + if (fsize->index != 0) + return -EINVAL; + + for (i = 0; i < NUM_SUPPORTED_FRAMESIZE; ++i) { + if (fsize->pixel_format != mtk_vdec_framesizes[i].fourcc) + continue; + + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; + fsize->stepwise = mtk_vdec_framesizes[i].stepwise; + if (!(ctx->dev->dec_capability & + VCODEC_CAPABILITY_4K_DISABLED)) { + mtk_v4l2_debug(3, "4K is enabled"); + fsize->stepwise.max_width = + VCODEC_DEC_4K_CODED_WIDTH; + fsize->stepwise.max_height = + VCODEC_DEC_4K_CODED_HEIGHT; + } + mtk_v4l2_debug(1, "%x, %d %d %d %d %d %d", + ctx->dev->dec_capability, + fsize->stepwise.min_width, + fsize->stepwise.max_width, + fsize->stepwise.step_width, + fsize->stepwise.min_height, + fsize->stepwise.max_height, + fsize->stepwise.step_height); + return 0; + } + + return -EINVAL; +} + +static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool output_queue) +{ + struct mtk_video_fmt *fmt; + int i, j = 0; + + for (i = 0; i < NUM_FORMATS; i++) { + if (output_queue && (mtk_video_formats[i].type != MTK_FMT_DEC)) + continue; + if (!output_queue && + (mtk_video_formats[i].type != MTK_FMT_FRAME)) + continue; + + if (j == f->index) + break; + ++j; + } + + if (i == NUM_FORMATS) + return -EINVAL; + + fmt = &mtk_video_formats[i]; + f->pixelformat = fmt->fourcc; + + return 0; +} + +static int vidioc_vdec_enum_fmt_vid_cap_mplane(struct file *file, void *pirv, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, false); +} + +static int vidioc_vdec_enum_fmt_vid_out_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, true); +} + +static int vidioc_vdec_g_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv); + struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp; + struct vb2_queue *vq; + struct mtk_q_data *q_data; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) { + mtk_v4l2_err("no vb2 queue for type=%d", f->type); + return -EINVAL; + } + + q_data = mtk_vdec_get_q_data(ctx, f->type); + + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->colorspace = ctx->colorspace; + pix_mp->ycbcr_enc = ctx->ycbcr_enc; + pix_mp->quantization = ctx->quantization; + pix_mp->xfer_func = ctx->xfer_func; + + if ((f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && + (ctx->state >= MTK_STATE_HEADER)) { + /* Until STREAMOFF is called on the CAPTURE queue + * (acknowledging the event), the driver operates as if + * the resolution hasn't changed yet. + * So we just return picinfo yet, and update picinfo in + * stop_streaming hook function + */ + q_data->sizeimage[0] = ctx->picinfo.y_bs_sz + + ctx->picinfo.y_len_sz; + q_data->sizeimage[1] = ctx->picinfo.c_bs_sz + + ctx->picinfo.c_len_sz; + q_data->bytesperline[0] = ctx->last_decoded_picinfo.buf_w; + q_data->bytesperline[1] = ctx->last_decoded_picinfo.buf_w; + q_data->coded_width = ctx->picinfo.buf_w; + q_data->coded_height = ctx->picinfo.buf_h; + + /* + * Width and height are set to the dimensions + * of the movie, the buffer is bigger and + * further processing stages should crop to this + * rectangle. + */ + pix_mp->width = q_data->coded_width; + pix_mp->height = q_data->coded_height; + + /* + * Set pixelformat to the format in which mt vcodec + * outputs the decoded frame + */ + pix_mp->num_planes = q_data->fmt->num_planes; + pix_mp->pixelformat = q_data->fmt->fourcc; + pix_mp->plane_fmt[0].bytesperline = q_data->bytesperline[0]; + pix_mp->plane_fmt[0].sizeimage = q_data->sizeimage[0]; + pix_mp->plane_fmt[1].bytesperline = q_data->bytesperline[1]; + pix_mp->plane_fmt[1].sizeimage = q_data->sizeimage[1]; + + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + /* + * This is run on OUTPUT + * The buffer contains compressed image + * so width and height have no meaning. + * Assign value here to pass v4l2-compliance test + */ + pix_mp->width = q_data->visible_width; + pix_mp->height = q_data->visible_height; + pix_mp->plane_fmt[0].bytesperline = q_data->bytesperline[0]; + pix_mp->plane_fmt[0].sizeimage = q_data->sizeimage[0]; + pix_mp->pixelformat = q_data->fmt->fourcc; + pix_mp->num_planes = q_data->fmt->num_planes; + } else { + pix_mp->width = q_data->coded_width; + pix_mp->height = q_data->coded_height; + pix_mp->num_planes = q_data->fmt->num_planes; + pix_mp->pixelformat = q_data->fmt->fourcc; + pix_mp->plane_fmt[0].bytesperline = q_data->bytesperline[0]; + pix_mp->plane_fmt[0].sizeimage = q_data->sizeimage[0]; + pix_mp->plane_fmt[1].bytesperline = q_data->bytesperline[1]; + pix_mp->plane_fmt[1].sizeimage = q_data->sizeimage[1]; + + mtk_v4l2_debug(1, "[%d] type=%d state=%d Format information could not be read, not ready yet!", + ctx->id, f->type, ctx->state); + } + + return 0; +} + +static int vb2ops_vdec_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, + unsigned int *nplanes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vq); + struct mtk_q_data *q_data; + unsigned int i; + + q_data = mtk_vdec_get_q_data(ctx, vq->type); + + if (q_data == NULL) { + mtk_v4l2_err("vq->type=%d err\n", vq->type); + return -EINVAL; + } + + if (*nplanes) { + for (i = 0; i < *nplanes; i++) { + if (sizes[i] < q_data->sizeimage[i]) + return -EINVAL; + } + } else { + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + *nplanes = 2; + else + *nplanes = 1; + + for (i = 0; i < *nplanes; i++) + sizes[i] = q_data->sizeimage[i]; + } + + mtk_v4l2_debug(1, + "[%d]\t type = %d, get %d plane(s), %d buffer(s) of size 0x%x 0x%x ", + ctx->id, vq->type, *nplanes, *nbuffers, + sizes[0], sizes[1]); + + return 0; +} + +static int vb2ops_vdec_buf_prepare(struct vb2_buffer *vb) +{ + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_q_data *q_data; + int i; + + mtk_v4l2_debug(3, "[%d] (%d) id=%d", + ctx->id, vb->vb2_queue->type, vb->index); + + q_data = mtk_vdec_get_q_data(ctx, vb->vb2_queue->type); + + for (i = 0; i < q_data->fmt->num_planes; i++) { + if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) { + mtk_v4l2_err("data will not fit into plane %d (%lu < %d)", + i, vb2_plane_size(vb, i), + q_data->sizeimage[i]); + } + } + + return 0; +} + +static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_buffer *src_buf; + struct mtk_vcodec_mem src_mem; + bool res_chg = false; + int ret = 0; + unsigned int dpbsize = 1; + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vb2_v4l2 = container_of(vb, + struct vb2_v4l2_buffer, vb2_buf); + struct mtk_video_dec_buf *buf = container_of(vb2_v4l2, + struct mtk_video_dec_buf, vb); + + mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p", + ctx->id, vb->vb2_queue->type, + vb->index, vb); + /* + * check if this buffer is ready to be used after decode + */ + if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + mutex_lock(&ctx->lock); + if (buf->used == false) { + v4l2_m2m_buf_queue(ctx->m2m_ctx, + to_vb2_v4l2_buffer(vb)); + buf->queued_in_vb2 = true; + buf->queued_in_v4l2 = true; + buf->ready_to_display = false; + } else { + buf->queued_in_vb2 = false; + buf->queued_in_v4l2 = true; + buf->ready_to_display = false; + } + mutex_unlock(&ctx->lock); + return; + } + + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2); + + if (ctx->state != MTK_STATE_INIT) { + mtk_v4l2_debug(3, "[%d] already init driver %d", + ctx->id, ctx->state); + return; + } + + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + if (!src_buf) { + mtk_v4l2_err("No src buffer"); + return; + } + + src_mem.va = vb2_plane_vaddr(src_buf, 0); + src_mem.dma_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0); + src_mem.size = (size_t)src_buf->planes[0].bytesused; + mtk_v4l2_debug(2, + "[%d] buf id=%d va=%p dma=%pad size=%zx", + ctx->id, src_buf->index, + src_mem.va, &src_mem.dma_addr, + src_mem.size); + + ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg); + if (ret || !res_chg) { + /* + * fb == NULL menas to parse SPS/PPS header or + * resolution info in src_mem. Decode can fail + * if there is no SPS header or picture info + * in bs + */ + int log_level = ret ? 0 : 1; + + src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), + VB2_BUF_STATE_DONE); + mtk_v4l2_debug(log_level, + "[%d] vdec_if_decode() src_buf=%d, size=%zu, fail=%d, res_chg=%d", + ctx->id, src_buf->index, + src_mem.size, ret, res_chg); + return; + } + + if (vdec_if_get_param(ctx, GET_PARAM_PIC_INFO, &ctx->picinfo)) { + mtk_v4l2_err("[%d]Error!! Cannot get param : GET_PARAM_PICTURE_INFO ERR", + ctx->id); + return; + } + + ctx->last_decoded_picinfo = ctx->picinfo; + ctx->q_data[MTK_Q_DATA_DST].sizeimage[0] = + ctx->picinfo.y_bs_sz + + ctx->picinfo.y_len_sz; + ctx->q_data[MTK_Q_DATA_DST].bytesperline[0] = + ctx->picinfo.buf_w; + ctx->q_data[MTK_Q_DATA_DST].sizeimage[1] = + ctx->picinfo.c_bs_sz + + ctx->picinfo.c_len_sz; + ctx->q_data[MTK_Q_DATA_DST].bytesperline[1] = ctx->picinfo.buf_w; + mtk_v4l2_debug(2, "[%d] vdec_if_init() OK wxh=%dx%d pic wxh=%dx%d sz[0]=0x%x sz[1]=0x%x", + ctx->id, + ctx->picinfo.buf_w, ctx->picinfo.buf_h, + ctx->picinfo.pic_w, ctx->picinfo.pic_h, + ctx->q_data[MTK_Q_DATA_DST].sizeimage[0], + ctx->q_data[MTK_Q_DATA_DST].sizeimage[1]); + + ret = vdec_if_get_param(ctx, GET_PARAM_DPB_SIZE, &dpbsize); + if (dpbsize == 0) + mtk_v4l2_err("[%d] GET_PARAM_DPB_SIZE fail=%d", ctx->id, ret); + + ctx->dpb_size = dpbsize; + ctx->state = MTK_STATE_HEADER; + mtk_v4l2_debug(1, "[%d] dpbsize=%d", ctx->id, ctx->dpb_size); +} + +static void vb2ops_vdec_buf_finish(struct vb2_buffer *vb) +{ + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vb2_v4l2; + struct mtk_video_dec_buf *buf; + + if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return; + + vb2_v4l2 = container_of(vb, struct vb2_v4l2_buffer, vb2_buf); + buf = container_of(vb2_v4l2, struct mtk_video_dec_buf, vb); + mutex_lock(&ctx->lock); + buf->queued_in_v4l2 = false; + buf->queued_in_vb2 = false; + mutex_unlock(&ctx->lock); +} + +static int vb2ops_vdec_buf_init(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vb2_v4l2 = container_of(vb, + struct vb2_v4l2_buffer, vb2_buf); + struct mtk_video_dec_buf *buf = container_of(vb2_v4l2, + struct mtk_video_dec_buf, vb); + + if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + buf->used = false; + buf->ready_to_display = false; + buf->queued_in_v4l2 = false; + } else { + buf->lastframe = false; + } + + return 0; +} + +static int vb2ops_vdec_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(q); + + if (ctx->state == MTK_STATE_FLUSH) + ctx->state = MTK_STATE_HEADER; + + return 0; +} + +static void vb2ops_vdec_stop_streaming(struct vb2_queue *q) +{ + struct vb2_buffer *src_buf = NULL, *dst_buf = NULL; + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(q); + + mtk_v4l2_debug(3, "[%d] (%d) state=(%x) ctx->decoded_frame_cnt=%d", + ctx->id, q->type, ctx->state, ctx->decoded_frame_cnt); + + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), + VB2_BUF_STATE_ERROR); + return; + } + + if (ctx->state >= MTK_STATE_HEADER) { + + /* Until STREAMOFF is called on the CAPTURE queue + * (acknowledging the event), the driver operates + * as if the resolution hasn't changed yet, i.e. + * VIDIOC_G_FMT< etc. return previous resolution. + * So we update picinfo here + */ + ctx->picinfo = ctx->last_decoded_picinfo; + + mtk_v4l2_debug(2, + "[%d]-> new(%d,%d), old(%d,%d), real(%d,%d)", + ctx->id, ctx->last_decoded_picinfo.pic_w, + ctx->last_decoded_picinfo.pic_h, + ctx->picinfo.pic_w, ctx->picinfo.pic_h, + ctx->last_decoded_picinfo.buf_w, + ctx->last_decoded_picinfo.buf_h); + + mtk_vdec_flush_decoder(ctx); + } + ctx->state = MTK_STATE_FLUSH; + + while ((dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx))) { + vb2_set_plane_payload(dst_buf, 0, 0); + vb2_set_plane_payload(dst_buf, 1, 0); + v4l2_m2m_buf_done(to_vb2_v4l2_buffer(dst_buf), + VB2_BUF_STATE_ERROR); + } + +} + +static void m2mops_vdec_device_run(void *priv) +{ + struct mtk_vcodec_ctx *ctx = priv; + struct mtk_vcodec_dev *dev = ctx->dev; + + queue_work(dev->decode_workqueue, &ctx->decode_work); +} + +static int m2mops_vdec_job_ready(void *m2m_priv) +{ + struct mtk_vcodec_ctx *ctx = m2m_priv; + + mtk_v4l2_debug(3, "[%d]", ctx->id); + + if (ctx->state == MTK_STATE_ABORT) + return 0; + + if ((ctx->last_decoded_picinfo.pic_w != ctx->picinfo.pic_w) || + (ctx->last_decoded_picinfo.pic_h != ctx->picinfo.pic_h)) + return 0; + + if (ctx->state != MTK_STATE_HEADER) + return 0; + + return 1; +} + +static void m2mops_vdec_job_abort(void *priv) +{ + struct mtk_vcodec_ctx *ctx = priv; + + ctx->state = MTK_STATE_ABORT; +} + +static int mtk_vdec_g_v_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mtk_vcodec_ctx *ctx = ctrl_to_ctx(ctrl); + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: + if (ctx->state >= MTK_STATE_HEADER) { + ctrl->val = ctx->dpb_size; + } else { + mtk_v4l2_debug(0, "Seqinfo not ready"); + ctrl->val = 0; + } + break; + default: + ret = -EINVAL; + } + return ret; +} + +static const struct v4l2_ctrl_ops mtk_vcodec_dec_ctrl_ops = { + .g_volatile_ctrl = mtk_vdec_g_v_ctrl, +}; + +int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx) +{ + struct v4l2_ctrl *ctrl; + + v4l2_ctrl_handler_init(&ctx->ctrl_hdl, 1); + + ctrl = v4l2_ctrl_new_std(&ctx->ctrl_hdl, + &mtk_vcodec_dec_ctrl_ops, + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE, + 0, 32, 1, 1); + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + if (ctx->ctrl_hdl.error) { + mtk_v4l2_err("Adding control failed %d", + ctx->ctrl_hdl.error); + return ctx->ctrl_hdl.error; + } + + v4l2_ctrl_handler_setup(&ctx->ctrl_hdl); + return 0; +} + +static void m2mops_vdec_lock(void *m2m_priv) +{ + struct mtk_vcodec_ctx *ctx = m2m_priv; + + mtk_v4l2_debug(3, "[%d]", ctx->id); + mutex_lock(&ctx->dev->dev_mutex); +} + +static void m2mops_vdec_unlock(void *m2m_priv) +{ + struct mtk_vcodec_ctx *ctx = m2m_priv; + + mtk_v4l2_debug(3, "[%d]", ctx->id); + mutex_unlock(&ctx->dev->dev_mutex); +} + +const struct v4l2_m2m_ops mtk_vdec_m2m_ops = { + .device_run = m2mops_vdec_device_run, + .job_ready = m2mops_vdec_job_ready, + .job_abort = m2mops_vdec_job_abort, + .lock = m2mops_vdec_lock, + .unlock = m2mops_vdec_unlock, +}; + +static const struct vb2_ops mtk_vdec_vb2_ops = { + .queue_setup = vb2ops_vdec_queue_setup, + .buf_prepare = vb2ops_vdec_buf_prepare, + .buf_queue = vb2ops_vdec_buf_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .buf_init = vb2ops_vdec_buf_init, + .buf_finish = vb2ops_vdec_buf_finish, + .start_streaming = vb2ops_vdec_start_streaming, + .stop_streaming = vb2ops_vdec_stop_streaming, +}; + +const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops = { + .vidioc_streamon = v4l2_m2m_ioctl_streamon, + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, + + .vidioc_qbuf = vidioc_vdec_qbuf, + .vidioc_dqbuf = vidioc_vdec_dqbuf, + + .vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt_vid_cap_mplane, + .vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt_vid_out_mplane, + + .vidioc_s_fmt_vid_cap_mplane = vidioc_vdec_s_fmt, + .vidioc_s_fmt_vid_out_mplane = vidioc_vdec_s_fmt, + .vidioc_g_fmt_vid_cap_mplane = vidioc_vdec_g_fmt, + .vidioc_g_fmt_vid_out_mplane = vidioc_vdec_g_fmt, + + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, + + .vidioc_enum_fmt_vid_cap_mplane = vidioc_vdec_enum_fmt_vid_cap_mplane, + .vidioc_enum_fmt_vid_out_mplane = vidioc_vdec_enum_fmt_vid_out_mplane, + .vidioc_enum_framesizes = vidioc_enum_framesizes, + + .vidioc_querycap = vidioc_vdec_querycap, + .vidioc_subscribe_event = vidioc_vdec_subscribe_evt, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_g_selection = vidioc_vdec_g_selection, + .vidioc_s_selection = vidioc_vdec_s_selection, +}; + +int mtk_vcodec_dec_queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct mtk_vcodec_ctx *ctx = priv; + int ret = 0; + + mtk_v4l2_debug(3, "[%d]", ctx->id); + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_DMABUF | VB2_MMAP; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct mtk_video_dec_buf); + src_vq->ops = &mtk_vdec_vb2_ops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + src_vq->lock = &ctx->dev->dev_mutex; + src_vq->dev = &ctx->dev->plat_dev->dev; + + ret = vb2_queue_init(src_vq); + if (ret) { + mtk_v4l2_err("Failed to initialize videobuf2 queue(output)"); + return ret; + } + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_DMABUF | VB2_MMAP; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct mtk_video_dec_buf); + dst_vq->ops = &mtk_vdec_vb2_ops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + dst_vq->lock = &ctx->dev->dev_mutex; + dst_vq->dev = &ctx->dev->plat_dev->dev; + + ret = vb2_queue_init(dst_vq); + if (ret) { + vb2_queue_release(src_vq); + mtk_v4l2_err("Failed to initialize videobuf2 queue(capture)"); + } + + return ret; +} diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h new file mode 100644 index 000000000000..362f5a85762e --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h @@ -0,0 +1,88 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MTK_VCODEC_DEC_H_ +#define _MTK_VCODEC_DEC_H_ + +#include <media/videobuf2-core.h> +#include <media/videobuf2-v4l2.h> + +#define VCODEC_CAPABILITY_4K_DISABLED 0x10 +#define VCODEC_DEC_4K_CODED_WIDTH 4096U +#define VCODEC_DEC_4K_CODED_HEIGHT 2304U +#define MTK_VDEC_MAX_W 2048U +#define MTK_VDEC_MAX_H 1088U + +#define MTK_VDEC_IRQ_STATUS_DEC_SUCCESS 0x10000 + +/** + * struct vdec_fb - decoder frame buffer + * @base_y : Y plane memory info + * @base_c : C plane memory info + * @status : frame buffer status (vdec_fb_status) + */ +struct vdec_fb { + struct mtk_vcodec_mem base_y; + struct mtk_vcodec_mem base_c; + unsigned int status; +}; + +/** + * struct mtk_video_dec_buf - Private data related to each VB2 buffer. + * @b: VB2 buffer + * @list: link list + * @used: Capture buffer contain decoded frame data and keep in + * codec data structure + * @ready_to_display: Capture buffer not display yet + * @queued_in_vb2: Capture buffer is queue in vb2 + * @queued_in_v4l2: Capture buffer is in v4l2 driver, but not in vb2 + * queue yet + * @lastframe: Intput buffer is last buffer - EOS + * @frame_buffer: Decode status, and buffer information of Capture buffer + * + * Note : These status information help us track and debug buffer state + */ +struct mtk_video_dec_buf { + struct vb2_v4l2_buffer vb; + struct list_head list; + + bool used; + bool ready_to_display; + bool queued_in_vb2; + bool queued_in_v4l2; + bool lastframe; + struct vdec_fb frame_buffer; +}; + +extern const struct v4l2_ioctl_ops mtk_vdec_ioctl_ops; +extern const struct v4l2_m2m_ops mtk_vdec_m2m_ops; + + +/* + * mtk_vdec_lock/mtk_vdec_unlock are for ctx instance to + * get/release lock before/after access decoder hw. + * mtk_vdec_lock get decoder hw lock and set curr_ctx + * to ctx instance that get lock + */ +void mtk_vdec_unlock(struct mtk_vcodec_ctx *ctx); +void mtk_vdec_lock(struct mtk_vcodec_ctx *ctx); +int mtk_vcodec_dec_queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq); +void mtk_vcodec_dec_set_default_params(struct mtk_vcodec_ctx *ctx); +void mtk_vcodec_dec_release(struct mtk_vcodec_ctx *ctx); +int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx); + + +#endif /* _MTK_VCODEC_DEC_H_ */ diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c new file mode 100644 index 000000000000..d48287c727f4 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c @@ -0,0 +1,394 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <media/v4l2-event.h> +#include <media/v4l2-mem2mem.h> +#include <media/videobuf2-dma-contig.h> + +#include "mtk_vcodec_drv.h" +#include "mtk_vcodec_dec.h" +#include "mtk_vcodec_dec_pm.h" +#include "mtk_vcodec_intr.h" +#include "mtk_vcodec_util.h" +#include "mtk_vpu.h" + +#define VDEC_HW_ACTIVE 0x10 +#define VDEC_IRQ_CFG 0x11 +#define VDEC_IRQ_CLR 0x10 +#define VDEC_IRQ_CFG_REG 0xa4 + +module_param(mtk_v4l2_dbg_level, int, 0644); +module_param(mtk_vcodec_dbg, bool, 0644); + +/* Wake up context wait_queue */ +static void wake_up_ctx(struct mtk_vcodec_ctx *ctx) +{ + ctx->int_cond = 1; + wake_up_interruptible(&ctx->queue); +} + +static irqreturn_t mtk_vcodec_dec_irq_handler(int irq, void *priv) +{ + struct mtk_vcodec_dev *dev = priv; + struct mtk_vcodec_ctx *ctx; + u32 cg_status = 0; + unsigned int dec_done_status = 0; + void __iomem *vdec_misc_addr = dev->reg_base[VDEC_MISC] + + VDEC_IRQ_CFG_REG; + + ctx = mtk_vcodec_get_curr_ctx(dev); + + /* check if HW active or not */ + cg_status = readl(dev->reg_base[0]); + if ((cg_status & VDEC_HW_ACTIVE) != 0) { + mtk_v4l2_err("DEC ISR, VDEC active is not 0x0 (0x%08x)", + cg_status); + return IRQ_HANDLED; + } + + dec_done_status = readl(vdec_misc_addr); + ctx->irq_status = dec_done_status; + if ((dec_done_status & MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) != + MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) + return IRQ_HANDLED; + + /* clear interrupt */ + writel((readl(vdec_misc_addr) | VDEC_IRQ_CFG), + dev->reg_base[VDEC_MISC] + VDEC_IRQ_CFG_REG); + writel((readl(vdec_misc_addr) & ~VDEC_IRQ_CLR), + dev->reg_base[VDEC_MISC] + VDEC_IRQ_CFG_REG); + + wake_up_ctx(ctx); + + mtk_v4l2_debug(3, + "mtk_vcodec_dec_irq_handler :wake up ctx %d, dec_done_status=%x", + ctx->id, dec_done_status); + + return IRQ_HANDLED; +} + +static void mtk_vcodec_dec_reset_handler(void *priv) +{ + struct mtk_vcodec_dev *dev = priv; + struct mtk_vcodec_ctx *ctx; + + mtk_v4l2_err("Watchdog timeout!!"); + + mutex_lock(&dev->dev_mutex); + list_for_each_entry(ctx, &dev->ctx_list, list) { + ctx->state = MTK_STATE_ABORT; + mtk_v4l2_debug(0, "[%d] Change to state MTK_STATE_ERROR", + ctx->id); + } + mutex_unlock(&dev->dev_mutex); +} + +static int fops_vcodec_open(struct file *file) +{ + struct mtk_vcodec_dev *dev = video_drvdata(file); + struct mtk_vcodec_ctx *ctx = NULL; + int ret = 0; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + mutex_lock(&dev->dev_mutex); + ctx->id = dev->id_counter++; + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + INIT_LIST_HEAD(&ctx->list); + ctx->dev = dev; + init_waitqueue_head(&ctx->queue); + mutex_init(&ctx->lock); + + ctx->type = MTK_INST_DECODER; + ret = mtk_vcodec_dec_ctrls_setup(ctx); + if (ret) { + mtk_v4l2_err("Failed to setup mt vcodec controls"); + goto err_ctrls_setup; + } + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev_dec, ctx, + &mtk_vcodec_dec_queue_init); + if (IS_ERR((__force void *)ctx->m2m_ctx)) { + ret = PTR_ERR((__force void *)ctx->m2m_ctx); + mtk_v4l2_err("Failed to v4l2_m2m_ctx_init() (%d)", + ret); + goto err_m2m_ctx_init; + } + mtk_vcodec_dec_set_default_params(ctx); + + if (v4l2_fh_is_singular(&ctx->fh)) { + mtk_vcodec_dec_pw_on(&dev->pm); + /* + * vpu_load_firmware checks if it was loaded already and + * does nothing in that case + */ + ret = vpu_load_firmware(dev->vpu_plat_dev); + if (ret < 0) { + /* + * Return 0 if downloading firmware successfully, + * otherwise it is failed + */ + mtk_v4l2_err("vpu_load_firmware failed!"); + goto err_load_fw; + } + + dev->dec_capability = + vpu_get_vdec_hw_capa(dev->vpu_plat_dev); + mtk_v4l2_debug(0, "decoder capability %x", dev->dec_capability); + } + + list_add(&ctx->list, &dev->ctx_list); + + mutex_unlock(&dev->dev_mutex); + mtk_v4l2_debug(0, "%s decoder [%d]", dev_name(&dev->plat_dev->dev), + ctx->id); + return ret; + + /* Deinit when failure occurred */ +err_load_fw: + v4l2_m2m_ctx_release(ctx->m2m_ctx); +err_m2m_ctx_init: + v4l2_ctrl_handler_free(&ctx->ctrl_hdl); +err_ctrls_setup: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + mutex_unlock(&dev->dev_mutex); + + return ret; +} + +static int fops_vcodec_release(struct file *file) +{ + struct mtk_vcodec_dev *dev = video_drvdata(file); + struct mtk_vcodec_ctx *ctx = fh_to_ctx(file->private_data); + + mtk_v4l2_debug(0, "[%d] decoder", ctx->id); + mutex_lock(&dev->dev_mutex); + + /* + * Call v4l2_m2m_ctx_release before mtk_vcodec_dec_release. First, it + * makes sure the worker thread is not running after vdec_if_deinit. + * Second, the decoder will be flushed and all the buffers will be + * returned in stop_streaming. + */ + v4l2_m2m_ctx_release(ctx->m2m_ctx); + mtk_vcodec_dec_release(ctx); + + if (v4l2_fh_is_singular(&ctx->fh)) + mtk_vcodec_dec_pw_off(&dev->pm); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + v4l2_ctrl_handler_free(&ctx->ctrl_hdl); + + list_del_init(&ctx->list); + kfree(ctx); + mutex_unlock(&dev->dev_mutex); + return 0; +} + +static const struct v4l2_file_operations mtk_vcodec_fops = { + .owner = THIS_MODULE, + .open = fops_vcodec_open, + .release = fops_vcodec_release, + .poll = v4l2_m2m_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = v4l2_m2m_fop_mmap, +}; + +static int mtk_vcodec_probe(struct platform_device *pdev) +{ + struct mtk_vcodec_dev *dev; + struct video_device *vfd_dec; + struct resource *res; + int i, ret; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + INIT_LIST_HEAD(&dev->ctx_list); + dev->plat_dev = pdev; + + dev->vpu_plat_dev = vpu_get_plat_device(dev->plat_dev); + if (dev->vpu_plat_dev == NULL) { + mtk_v4l2_err("[VPU] vpu device in not ready"); + return -EPROBE_DEFER; + } + + vpu_wdt_reg_handler(dev->vpu_plat_dev, mtk_vcodec_dec_reset_handler, + dev, VPU_RST_DEC); + + ret = mtk_vcodec_init_dec_pm(dev); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get mt vcodec clock source"); + return ret; + } + + for (i = 0; i < NUM_MAX_VDEC_REG_BASE; i++) { + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + if (res == NULL) { + dev_err(&pdev->dev, "get memory resource failed."); + ret = -ENXIO; + goto err_res; + } + dev->reg_base[i] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR((__force void *)dev->reg_base[i])) { + ret = PTR_ERR((__force void *)dev->reg_base[i]); + goto err_res; + } + mtk_v4l2_debug(2, "reg[%d] base=%p", i, dev->reg_base[i]); + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get irq resource"); + ret = -ENOENT; + goto err_res; + } + + dev->dec_irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(&pdev->dev, dev->dec_irq, + mtk_vcodec_dec_irq_handler, 0, pdev->name, dev); + if (ret) { + dev_err(&pdev->dev, "Failed to install dev->dec_irq %d (%d)", + dev->dec_irq, + ret); + goto err_res; + } + + disable_irq(dev->dec_irq); + mutex_init(&dev->dec_mutex); + mutex_init(&dev->dev_mutex); + spin_lock_init(&dev->irqlock); + + snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), "%s", + "[/MTK_V4L2_VDEC]"); + + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); + if (ret) { + mtk_v4l2_err("v4l2_device_register err=%d", ret); + goto err_res; + } + + init_waitqueue_head(&dev->queue); + + vfd_dec = video_device_alloc(); + if (!vfd_dec) { + mtk_v4l2_err("Failed to allocate video device"); + ret = -ENOMEM; + goto err_dec_alloc; + } + vfd_dec->fops = &mtk_vcodec_fops; + vfd_dec->ioctl_ops = &mtk_vdec_ioctl_ops; + vfd_dec->release = video_device_release; + vfd_dec->lock = &dev->dev_mutex; + vfd_dec->v4l2_dev = &dev->v4l2_dev; + vfd_dec->vfl_dir = VFL_DIR_M2M; + vfd_dec->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | + V4L2_CAP_STREAMING; + + snprintf(vfd_dec->name, sizeof(vfd_dec->name), "%s", + MTK_VCODEC_DEC_NAME); + video_set_drvdata(vfd_dec, dev); + dev->vfd_dec = vfd_dec; + platform_set_drvdata(pdev, dev); + + dev->m2m_dev_dec = v4l2_m2m_init(&mtk_vdec_m2m_ops); + if (IS_ERR((__force void *)dev->m2m_dev_dec)) { + mtk_v4l2_err("Failed to init mem2mem dec device"); + ret = PTR_ERR((__force void *)dev->m2m_dev_dec); + goto err_dec_mem_init; + } + + dev->decode_workqueue = + alloc_ordered_workqueue(MTK_VCODEC_DEC_NAME, + WQ_MEM_RECLAIM | WQ_FREEZABLE); + if (!dev->decode_workqueue) { + mtk_v4l2_err("Failed to create decode workqueue"); + ret = -EINVAL; + goto err_event_workq; + } + + ret = video_register_device(vfd_dec, VFL_TYPE_GRABBER, 0); + if (ret) { + mtk_v4l2_err("Failed to register video device"); + goto err_dec_reg; + } + + mtk_v4l2_debug(0, "decoder registered as /dev/video%d", + vfd_dec->num); + + return 0; + +err_dec_reg: + destroy_workqueue(dev->decode_workqueue); +err_event_workq: + v4l2_m2m_release(dev->m2m_dev_dec); +err_dec_mem_init: + video_unregister_device(vfd_dec); +err_dec_alloc: + v4l2_device_unregister(&dev->v4l2_dev); +err_res: + mtk_vcodec_release_dec_pm(dev); + return ret; +} + +static const struct of_device_id mtk_vcodec_match[] = { + {.compatible = "mediatek,mt8173-vcodec-dec",}, + {}, +}; + +MODULE_DEVICE_TABLE(of, mtk_vcodec_match); + +static int mtk_vcodec_dec_remove(struct platform_device *pdev) +{ + struct mtk_vcodec_dev *dev = platform_get_drvdata(pdev); + + flush_workqueue(dev->decode_workqueue); + destroy_workqueue(dev->decode_workqueue); + if (dev->m2m_dev_dec) + v4l2_m2m_release(dev->m2m_dev_dec); + + if (dev->vfd_dec) + video_unregister_device(dev->vfd_dec); + + v4l2_device_unregister(&dev->v4l2_dev); + mtk_vcodec_release_dec_pm(dev); + return 0; +} + +static struct platform_driver mtk_vcodec_dec_driver = { + .probe = mtk_vcodec_probe, + .remove = mtk_vcodec_dec_remove, + .driver = { + .name = MTK_VCODEC_DEC_NAME, + .of_match_table = mtk_vcodec_match, + }, +}; + +module_platform_driver(mtk_vcodec_dec_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Mediatek video codec V4L2 decoder driver"); diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c new file mode 100644 index 000000000000..79ca03ac449c --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c @@ -0,0 +1,202 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/pm_runtime.h> +#include <soc/mediatek/smi.h> + +#include "mtk_vcodec_dec_pm.h" +#include "mtk_vcodec_util.h" +#include "mtk_vpu.h" + +int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *mtkdev) +{ + struct device_node *node; + struct platform_device *pdev; + struct mtk_vcodec_pm *pm; + int ret = 0; + + pdev = mtkdev->plat_dev; + pm = &mtkdev->pm; + pm->mtkdev = mtkdev; + node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0); + if (!node) { + mtk_v4l2_err("of_parse_phandle mediatek,larb fail!"); + return -1; + } + + pdev = of_find_device_by_node(node); + if (WARN_ON(!pdev)) { + of_node_put(node); + return -1; + } + pm->larbvdec = &pdev->dev; + pdev = mtkdev->plat_dev; + pm->dev = &pdev->dev; + + pm->vcodecpll = devm_clk_get(&pdev->dev, "vcodecpll"); + if (IS_ERR(pm->vcodecpll)) { + mtk_v4l2_err("devm_clk_get vcodecpll fail"); + ret = PTR_ERR(pm->vcodecpll); + } + + pm->univpll_d2 = devm_clk_get(&pdev->dev, "univpll_d2"); + if (IS_ERR(pm->univpll_d2)) { + mtk_v4l2_err("devm_clk_get univpll_d2 fail"); + ret = PTR_ERR(pm->univpll_d2); + } + + pm->clk_cci400_sel = devm_clk_get(&pdev->dev, "clk_cci400_sel"); + if (IS_ERR(pm->clk_cci400_sel)) { + mtk_v4l2_err("devm_clk_get clk_cci400_sel fail"); + ret = PTR_ERR(pm->clk_cci400_sel); + } + + pm->vdec_sel = devm_clk_get(&pdev->dev, "vdec_sel"); + if (IS_ERR(pm->vdec_sel)) { + mtk_v4l2_err("devm_clk_get vdec_sel fail"); + ret = PTR_ERR(pm->vdec_sel); + } + + pm->vdecpll = devm_clk_get(&pdev->dev, "vdecpll"); + if (IS_ERR(pm->vdecpll)) { + mtk_v4l2_err("devm_clk_get vdecpll fail"); + ret = PTR_ERR(pm->vdecpll); + } + + pm->vencpll = devm_clk_get(&pdev->dev, "vencpll"); + if (IS_ERR(pm->vencpll)) { + mtk_v4l2_err("devm_clk_get vencpll fail"); + ret = PTR_ERR(pm->vencpll); + } + + pm->venc_lt_sel = devm_clk_get(&pdev->dev, "venc_lt_sel"); + if (IS_ERR(pm->venc_lt_sel)) { + mtk_v4l2_err("devm_clk_get venc_lt_sel fail"); + ret = PTR_ERR(pm->venc_lt_sel); + } + + pm->vdec_bus_clk_src = devm_clk_get(&pdev->dev, "vdec_bus_clk_src"); + if (IS_ERR(pm->vdec_bus_clk_src)) { + mtk_v4l2_err("devm_clk_get vdec_bus_clk_src"); + ret = PTR_ERR(pm->vdec_bus_clk_src); + } + + pm_runtime_enable(&pdev->dev); + + return ret; +} + +void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev) +{ + pm_runtime_disable(dev->pm.dev); +} + +void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm) +{ + int ret; + + ret = pm_runtime_get_sync(pm->dev); + if (ret) + mtk_v4l2_err("pm_runtime_get_sync fail %d", ret); +} + +void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm) +{ + int ret; + + ret = pm_runtime_put_sync(pm->dev); + if (ret) + mtk_v4l2_err("pm_runtime_put_sync fail %d", ret); +} + +void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm) +{ + int ret; + + ret = clk_set_rate(pm->vcodecpll, 1482 * 1000000); + if (ret) + mtk_v4l2_err("clk_set_rate vcodecpll fail %d", ret); + + ret = clk_set_rate(pm->vencpll, 800 * 1000000); + if (ret) + mtk_v4l2_err("clk_set_rate vencpll fail %d", ret); + + ret = clk_prepare_enable(pm->vcodecpll); + if (ret) + mtk_v4l2_err("clk_prepare_enable vcodecpll fail %d", ret); + + ret = clk_prepare_enable(pm->vencpll); + if (ret) + mtk_v4l2_err("clk_prepare_enable vencpll fail %d", ret); + + ret = clk_prepare_enable(pm->vdec_bus_clk_src); + if (ret) + mtk_v4l2_err("clk_prepare_enable vdec_bus_clk_src fail %d", + ret); + + ret = clk_prepare_enable(pm->venc_lt_sel); + if (ret) + mtk_v4l2_err("clk_prepare_enable venc_lt_sel fail %d", ret); + + ret = clk_set_parent(pm->venc_lt_sel, pm->vdec_bus_clk_src); + if (ret) + mtk_v4l2_err("clk_set_parent venc_lt_sel vdec_bus_clk_src fail %d", + ret); + + ret = clk_prepare_enable(pm->univpll_d2); + if (ret) + mtk_v4l2_err("clk_prepare_enable univpll_d2 fail %d", ret); + + ret = clk_prepare_enable(pm->clk_cci400_sel); + if (ret) + mtk_v4l2_err("clk_prepare_enable clk_cci400_sel fail %d", ret); + + ret = clk_set_parent(pm->clk_cci400_sel, pm->univpll_d2); + if (ret) + mtk_v4l2_err("clk_set_parent clk_cci400_sel univpll_d2 fail %d", + ret); + + ret = clk_prepare_enable(pm->vdecpll); + if (ret) + mtk_v4l2_err("clk_prepare_enable vdecpll fail %d", ret); + + ret = clk_prepare_enable(pm->vdec_sel); + if (ret) + mtk_v4l2_err("clk_prepare_enable vdec_sel fail %d", ret); + + ret = clk_set_parent(pm->vdec_sel, pm->vdecpll); + if (ret) + mtk_v4l2_err("clk_set_parent vdec_sel vdecpll fail %d", ret); + + ret = mtk_smi_larb_get(pm->larbvdec); + if (ret) + mtk_v4l2_err("mtk_smi_larb_get larbvdec fail %d", ret); + +} + +void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm) +{ + mtk_smi_larb_put(pm->larbvdec); + clk_disable_unprepare(pm->vdec_sel); + clk_disable_unprepare(pm->vdecpll); + clk_disable_unprepare(pm->univpll_d2); + clk_disable_unprepare(pm->clk_cci400_sel); + clk_disable_unprepare(pm->venc_lt_sel); + clk_disable_unprepare(pm->vdec_bus_clk_src); + clk_disable_unprepare(pm->vencpll); + clk_disable_unprepare(pm->vcodecpll); +} diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h new file mode 100644 index 000000000000..86a7825353e3 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h @@ -0,0 +1,28 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MTK_VCODEC_DEC_PM_H_ +#define _MTK_VCODEC_DEC_PM_H_ + +#include "mtk_vcodec_drv.h" + +int mtk_vcodec_init_dec_pm(struct mtk_vcodec_dev *dev); +void mtk_vcodec_release_dec_pm(struct mtk_vcodec_dev *dev); + +void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm); +void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm); +void mtk_vcodec_dec_clock_on(struct mtk_vcodec_pm *pm); +void mtk_vcodec_dec_clock_off(struct mtk_vcodec_pm *pm); + +#endif /* _MTK_VCODEC_DEC_PM_H_ */ diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h index c8eaa41c00e6..d7eb8ef855d2 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h @@ -22,13 +22,13 @@ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <media/videobuf2-core.h> - +#include "mtk_vcodec_util.h" #define MTK_VCODEC_DRV_NAME "mtk_vcodec_drv" +#define MTK_VCODEC_DEC_NAME "mtk-vcodec-dec" #define MTK_VCODEC_ENC_NAME "mtk-vcodec-enc" #define MTK_PLATFORM_STR "platform:mt8173" - #define MTK_VCODEC_MAX_PLANES 3 #define MTK_V4L2_BENCHMARK 0 #define WAIT_INTR_TIMEOUT_MS 1000 @@ -179,6 +179,9 @@ struct mtk_enc_params { * struct mtk_vcodec_pm - Power management data structure */ struct mtk_vcodec_pm { + struct clk *vdec_bus_clk_src; + struct clk *vencpll; + struct clk *vcodecpll; struct clk *univpll_d2; struct clk *clk_cci400_sel; @@ -196,6 +199,32 @@ struct mtk_vcodec_pm { }; /** + * struct vdec_pic_info - picture size information + * @pic_w: picture width + * @pic_h: picture height + * @buf_w: picture buffer width (64 aligned up from pic_w) + * @buf_h: picture buffer heiht (64 aligned up from pic_h) + * @y_bs_sz: Y bitstream size + * @c_bs_sz: CbCr bitstream size + * @y_len_sz: additional size required to store decompress information for y + * plane + * @c_len_sz: additional size required to store decompress information for cbcr + * plane + * E.g. suppose picture size is 176x144, + * buffer size will be aligned to 176x160. + */ +struct vdec_pic_info { + unsigned int pic_w; + unsigned int pic_h; + unsigned int buf_w; + unsigned int buf_h; + unsigned int y_bs_sz; + unsigned int c_bs_sz; + unsigned int y_len_sz; + unsigned int c_len_sz; +}; + +/** * struct mtk_vcodec_ctx - Context (instance) private data. * * @type: type of the instance - decoder or encoder @@ -209,9 +238,12 @@ struct mtk_vcodec_pm { * @state: state of the context * @param_change: indicate encode parameter type * @enc_params: encoding parameters + * @dec_if: hooked decoder driver interface * @enc_if: hoooked encoder driver interface * @drv_handle: driver handle for specific decode/encode instance * + * @picinfo: store picture info after header parsing + * @dpb_size: store dpb count after header parsing * @int_cond: variable used by the waitqueue * @int_type: type of the last interrupt * @queue: waitqueue that can be used to wait for this context to @@ -219,12 +251,16 @@ struct mtk_vcodec_pm { * @irq_status: irq status * * @ctrl_hdl: handler for v4l2 framework + * @decode_work: worker for the decoding * @encode_work: worker for the encoding + * @last_decoded_picinfo: pic information get from latest decode * * @colorspace: enum v4l2_colorspace; supplemental to pixelformat * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding * @quantization: enum v4l2_quantization, colorspace quantization * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + * @lock: protect variables accessed by V4L2 threads and worker thread such as + * mtk_video_dec_buf. */ struct mtk_vcodec_ctx { enum mtk_instance_type type; @@ -239,28 +275,40 @@ struct mtk_vcodec_ctx { enum mtk_encode_param param_change; struct mtk_enc_params enc_params; + const struct vdec_common_if *dec_if; const struct venc_common_if *enc_if; unsigned long drv_handle; + struct vdec_pic_info picinfo; + int dpb_size; + int int_cond; int int_type; wait_queue_head_t queue; unsigned int irq_status; struct v4l2_ctrl_handler ctrl_hdl; + struct work_struct decode_work; struct work_struct encode_work; + struct vdec_pic_info last_decoded_picinfo; enum v4l2_colorspace colorspace; enum v4l2_ycbcr_encoding ycbcr_enc; enum v4l2_quantization quantization; enum v4l2_xfer_func xfer_func; + + int decoded_frame_cnt; + struct mutex lock; + }; /** * struct mtk_vcodec_dev - driver data * @v4l2_dev: V4L2 device to register video devices for. + * @vfd_dec: Video device for decoder * @vfd_enc: Video device for encoder. * + * @m2m_dev_dec: m2m device for decoder * @m2m_dev_enc: m2m device for encoder. * @plat_dev: platform device * @vpu_plat_dev: mtk vpu platform device @@ -271,7 +319,6 @@ struct mtk_vcodec_ctx { * @reg_base: Mapped address of MTK Vcodec registers. * * @id_counter: used to identify current opened instance - * @num_instances: counter of active MTK Vcodec instances * * @encode_workqueue: encode work queue * @@ -280,9 +327,11 @@ struct mtk_vcodec_ctx { * @dev_mutex: video_device lock * @queue: waitqueue for waiting for completion of device commands * + * @dec_irq: decoder irq resource * @enc_irq: h264 encoder irq resource * @enc_lt_irq: vp8 encoder irq resource * + * @dec_mutex: decoder hardware lock * @enc_mutex: encoder hardware lock. * * @pm: power management control @@ -291,8 +340,10 @@ struct mtk_vcodec_ctx { */ struct mtk_vcodec_dev { struct v4l2_device v4l2_dev; + struct video_device *vfd_dec; struct video_device *vfd_enc; + struct v4l2_m2m_dev *m2m_dev_dec; struct v4l2_m2m_dev *m2m_dev_enc; struct platform_device *plat_dev; struct platform_device *vpu_plat_dev; @@ -302,18 +353,19 @@ struct mtk_vcodec_dev { void __iomem *reg_base[NUM_MAX_VCODEC_REG_BASE]; unsigned long id_counter; - int num_instances; + struct workqueue_struct *decode_workqueue; struct workqueue_struct *encode_workqueue; - int int_cond; int int_type; struct mutex dev_mutex; wait_queue_head_t queue; + int dec_irq; int enc_irq; int enc_lt_irq; + struct mutex dec_mutex; struct mutex enc_mutex; struct mtk_vcodec_pm pm; diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c index 5cd2151431bf..aa81f3ce9463 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c @@ -188,7 +188,6 @@ static int fops_vcodec_open(struct file *file) mtk_v4l2_debug(2, "Create instance [%d]@%p m2m_ctx=%p ", ctx->id, ctx, ctx->m2m_ctx); - dev->num_instances++; list_add(&ctx->list, &dev->ctx_list); mutex_unlock(&dev->dev_mutex); @@ -218,18 +217,13 @@ static int fops_vcodec_release(struct file *file) mtk_v4l2_debug(1, "[%d] encoder", ctx->id); mutex_lock(&dev->dev_mutex); - /* - * Call v4l2_m2m_ctx_release to make sure the worker thread is not - * running after venc_if_deinit. - */ - v4l2_m2m_ctx_release(ctx->m2m_ctx); mtk_vcodec_enc_release(ctx); v4l2_fh_del(&ctx->fh); v4l2_fh_exit(&ctx->fh); v4l2_ctrl_handler_free(&ctx->ctrl_hdl); + v4l2_m2m_ctx_release(ctx->m2m_ctx); list_del_init(&ctx->list); - dev->num_instances--; kfree(ctx); mutex_unlock(&dev->dev_mutex); return 0; diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c index 52e7e5c9afa0..113b2097f061 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c @@ -30,8 +30,7 @@ int mtk_vcodec_wait_for_done_ctx(struct mtk_vcodec_ctx *ctx, int command, timeout_jiff = msecs_to_jiffies(timeout_ms); ret = wait_event_interruptible_timeout(*waitqueue, - (ctx->int_cond && - (ctx->int_type == command)), + ctx->int_cond, timeout_jiff); if (!ret) { diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c index 5e3651372a3c..46768c056193 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c @@ -81,14 +81,37 @@ void mtk_vcodec_mem_free(struct mtk_vcodec_ctx *data, return; } - dma_free_coherent(dev, size, mem->va, mem->dma_addr); - mem->va = NULL; - mem->dma_addr = 0; - mem->size = 0; - mtk_v4l2_debug(3, "[%d] - va = %p", ctx->id, mem->va); mtk_v4l2_debug(3, "[%d] - dma = 0x%lx", ctx->id, (unsigned long)mem->dma_addr); mtk_v4l2_debug(3, "[%d] size = 0x%lx", ctx->id, size); + + dma_free_coherent(dev, size, mem->va, mem->dma_addr); + mem->va = NULL; + mem->dma_addr = 0; + mem->size = 0; } EXPORT_SYMBOL(mtk_vcodec_mem_free); + +void mtk_vcodec_set_curr_ctx(struct mtk_vcodec_dev *dev, + struct mtk_vcodec_ctx *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->irqlock, flags); + dev->curr_ctx = ctx; + spin_unlock_irqrestore(&dev->irqlock, flags); +} +EXPORT_SYMBOL(mtk_vcodec_set_curr_ctx); + +struct mtk_vcodec_ctx *mtk_vcodec_get_curr_ctx(struct mtk_vcodec_dev *dev) +{ + unsigned long flags; + struct mtk_vcodec_ctx *ctx; + + spin_lock_irqsave(&dev->irqlock, flags); + ctx = dev->curr_ctx; + spin_unlock_irqrestore(&dev->irqlock, flags); + return ctx; +} +EXPORT_SYMBOL(mtk_vcodec_get_curr_ctx); diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h index d6345fc04840..7d55975d3185 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h @@ -26,6 +26,7 @@ struct mtk_vcodec_mem { }; struct mtk_vcodec_ctx; +struct mtk_vcodec_dev; extern int mtk_v4l2_dbg_level; extern bool mtk_vcodec_dbg; @@ -84,4 +85,8 @@ int mtk_vcodec_mem_alloc(struct mtk_vcodec_ctx *data, struct mtk_vcodec_mem *mem); void mtk_vcodec_mem_free(struct mtk_vcodec_ctx *data, struct mtk_vcodec_mem *mem); +void mtk_vcodec_set_curr_ctx(struct mtk_vcodec_dev *dev, + struct mtk_vcodec_ctx *ctx); +struct mtk_vcodec_ctx *mtk_vcodec_get_curr_ctx(struct mtk_vcodec_dev *dev); + #endif /* _MTK_VCODEC_UTIL_H_ */ diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c new file mode 100644 index 000000000000..57a842ff3097 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c @@ -0,0 +1,507 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/slab.h> + +#include "../vdec_drv_if.h" +#include "../mtk_vcodec_util.h" +#include "../mtk_vcodec_dec.h" +#include "../mtk_vcodec_intr.h" +#include "../vdec_vpu_if.h" +#include "../vdec_drv_base.h" + +#define NAL_NON_IDR_SLICE 0x01 +#define NAL_IDR_SLICE 0x05 +#define NAL_H264_PPS 0x08 +#define NAL_TYPE(value) ((value) & 0x1F) + +#define BUF_PREDICTION_SZ (32 * 1024) + +#define MB_UNIT_LEN 16 + +/* motion vector size (bytes) for every macro block */ +#define HW_MB_STORE_SZ 64 + +#define H264_MAX_FB_NUM 17 +#define HDR_PARSING_BUF_SZ 1024 + +/** + * struct h264_fb - h264 decode frame buffer information + * @vdec_fb_va : virtual address of struct vdec_fb + * @y_fb_dma : dma address of Y frame buffer (luma) + * @c_fb_dma : dma address of C frame buffer (chroma) + * @poc : picture order count of frame buffer + * @reserved : for 8 bytes alignment + */ +struct h264_fb { + uint64_t vdec_fb_va; + uint64_t y_fb_dma; + uint64_t c_fb_dma; + int32_t poc; + uint32_t reserved; +}; + +/** + * struct h264_ring_fb_list - ring frame buffer list + * @fb_list : frame buffer arrary + * @read_idx : read index + * @write_idx : write index + * @count : buffer count in list + */ +struct h264_ring_fb_list { + struct h264_fb fb_list[H264_MAX_FB_NUM]; + unsigned int read_idx; + unsigned int write_idx; + unsigned int count; + unsigned int reserved; +}; + +/** + * struct vdec_h264_dec_info - decode information + * @dpb_sz : decoding picture buffer size + * @resolution_changed : resoltion change happen + * @realloc_mv_buf : flag to notify driver to re-allocate mv buffer + * @reserved : for 8 bytes alignment + * @bs_dma : Input bit-stream buffer dma address + * @y_fb_dma : Y frame buffer dma address + * @c_fb_dma : C frame buffer dma address + * @vdec_fb_va : VDEC frame buffer struct virtual address + */ +struct vdec_h264_dec_info { + uint32_t dpb_sz; + uint32_t resolution_changed; + uint32_t realloc_mv_buf; + uint32_t reserved; + uint64_t bs_dma; + uint64_t y_fb_dma; + uint64_t c_fb_dma; + uint64_t vdec_fb_va; +}; + +/** + * struct vdec_h264_vsi - shared memory for decode information exchange + * between VPU and Host. + * The memory is allocated by VPU then mapping to Host + * in vpu_dec_init() and freed in vpu_dec_deinit() + * by VPU. + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item + * @hdr_buf : Header parsing buffer (AP-W, VPU-R) + * @pred_buf_dma : HW working predication buffer dma address (AP-W, VPU-R) + * @mv_buf_dma : HW working motion vector buffer dma address (AP-W, VPU-R) + * @list_free : free frame buffer ring list (AP-W/R, VPU-W) + * @list_disp : display frame buffer ring list (AP-R, VPU-W) + * @dec : decode information (AP-R, VPU-W) + * @pic : picture information (AP-R, VPU-W) + * @crop : crop information (AP-R, VPU-W) + */ +struct vdec_h264_vsi { + unsigned char hdr_buf[HDR_PARSING_BUF_SZ]; + uint64_t pred_buf_dma; + uint64_t mv_buf_dma[H264_MAX_FB_NUM]; + struct h264_ring_fb_list list_free; + struct h264_ring_fb_list list_disp; + struct vdec_h264_dec_info dec; + struct vdec_pic_info pic; + struct v4l2_rect crop; +}; + +/** + * struct vdec_h264_inst - h264 decoder instance + * @num_nalu : how many nalus be decoded + * @ctx : point to mtk_vcodec_ctx + * @pred_buf : HW working predication buffer + * @mv_buf : HW working motion vector buffer + * @vpu : VPU instance + * @vsi : VPU shared information + */ +struct vdec_h264_inst { + unsigned int num_nalu; + struct mtk_vcodec_ctx *ctx; + struct mtk_vcodec_mem pred_buf; + struct mtk_vcodec_mem mv_buf[H264_MAX_FB_NUM]; + struct vdec_vpu_inst vpu; + struct vdec_h264_vsi *vsi; +}; + +static unsigned int get_mv_buf_size(unsigned int width, unsigned int height) +{ + return HW_MB_STORE_SZ * (width/MB_UNIT_LEN) * (height/MB_UNIT_LEN); +} + +static int allocate_predication_buf(struct vdec_h264_inst *inst) +{ + int err = 0; + + inst->pred_buf.size = BUF_PREDICTION_SZ; + err = mtk_vcodec_mem_alloc(inst->ctx, &inst->pred_buf); + if (err) { + mtk_vcodec_err(inst, "failed to allocate ppl buf"); + return err; + } + + inst->vsi->pred_buf_dma = inst->pred_buf.dma_addr; + return 0; +} + +static void free_predication_buf(struct vdec_h264_inst *inst) +{ + struct mtk_vcodec_mem *mem = NULL; + + mtk_vcodec_debug_enter(inst); + + inst->vsi->pred_buf_dma = 0; + mem = &inst->pred_buf; + if (mem->va) + mtk_vcodec_mem_free(inst->ctx, mem); +} + +static int alloc_mv_buf(struct vdec_h264_inst *inst, struct vdec_pic_info *pic) +{ + int i; + int err; + struct mtk_vcodec_mem *mem = NULL; + unsigned int buf_sz = get_mv_buf_size(pic->buf_w, pic->buf_h); + + for (i = 0; i < H264_MAX_FB_NUM; i++) { + mem = &inst->mv_buf[i]; + if (mem->va) + mtk_vcodec_mem_free(inst->ctx, mem); + mem->size = buf_sz; + err = mtk_vcodec_mem_alloc(inst->ctx, mem); + if (err) { + mtk_vcodec_err(inst, "failed to allocate mv buf"); + return err; + } + inst->vsi->mv_buf_dma[i] = mem->dma_addr; + } + + return 0; +} + +static void free_mv_buf(struct vdec_h264_inst *inst) +{ + int i; + struct mtk_vcodec_mem *mem = NULL; + + for (i = 0; i < H264_MAX_FB_NUM; i++) { + inst->vsi->mv_buf_dma[i] = 0; + mem = &inst->mv_buf[i]; + if (mem->va) + mtk_vcodec_mem_free(inst->ctx, mem); + } +} + +static int check_list_validity(struct vdec_h264_inst *inst, bool disp_list) +{ + struct h264_ring_fb_list *list; + + list = disp_list ? &inst->vsi->list_disp : &inst->vsi->list_free; + + if (list->count > H264_MAX_FB_NUM || + list->read_idx >= H264_MAX_FB_NUM || + list->write_idx >= H264_MAX_FB_NUM) { + mtk_vcodec_err(inst, "%s list err: cnt=%d r_idx=%d w_idx=%d", + disp_list ? "disp" : "free", list->count, + list->read_idx, list->write_idx); + return -EINVAL; + } + + return 0; +} + +static void put_fb_to_free(struct vdec_h264_inst *inst, struct vdec_fb *fb) +{ + struct h264_ring_fb_list *list; + + if (fb) { + if (check_list_validity(inst, false)) + return; + + list = &inst->vsi->list_free; + if (list->count == H264_MAX_FB_NUM) { + mtk_vcodec_err(inst, "[FB] put fb free_list full"); + return; + } + + mtk_vcodec_debug(inst, "[FB] put fb into free_list @(%p, %llx)", + fb->base_y.va, (u64)fb->base_y.dma_addr); + + list->fb_list[list->write_idx].vdec_fb_va = (u64)(uintptr_t)fb; + list->write_idx = (list->write_idx == H264_MAX_FB_NUM - 1) ? + 0 : list->write_idx + 1; + list->count++; + } +} + +static void get_pic_info(struct vdec_h264_inst *inst, + struct vdec_pic_info *pic) +{ + *pic = inst->vsi->pic; + mtk_vcodec_debug(inst, "pic(%d, %d), buf(%d, %d)", + pic->pic_w, pic->pic_h, pic->buf_w, pic->buf_h); + mtk_vcodec_debug(inst, "Y(%d, %d), C(%d, %d)", pic->y_bs_sz, + pic->y_len_sz, pic->c_bs_sz, pic->c_len_sz); +} + +static void get_crop_info(struct vdec_h264_inst *inst, struct v4l2_rect *cr) +{ + cr->left = inst->vsi->crop.left; + cr->top = inst->vsi->crop.top; + cr->width = inst->vsi->crop.width; + cr->height = inst->vsi->crop.height; + + mtk_vcodec_debug(inst, "l=%d, t=%d, w=%d, h=%d", + cr->left, cr->top, cr->width, cr->height); +} + +static void get_dpb_size(struct vdec_h264_inst *inst, unsigned int *dpb_sz) +{ + *dpb_sz = inst->vsi->dec.dpb_sz; + mtk_vcodec_debug(inst, "sz=%d", *dpb_sz); +} + +static int vdec_h264_init(struct mtk_vcodec_ctx *ctx, unsigned long *h_vdec) +{ + struct vdec_h264_inst *inst = NULL; + int err; + + inst = kzalloc(sizeof(*inst), GFP_KERNEL); + if (!inst) + return -ENOMEM; + + inst->ctx = ctx; + + inst->vpu.id = IPI_VDEC_H264; + inst->vpu.dev = ctx->dev->vpu_plat_dev; + inst->vpu.ctx = ctx; + inst->vpu.handler = vpu_dec_ipi_handler; + + err = vpu_dec_init(&inst->vpu); + if (err) { + mtk_vcodec_err(inst, "vdec_h264 init err=%d", err); + goto error_free_inst; + } + + inst->vsi = (struct vdec_h264_vsi *)inst->vpu.vsi; + err = allocate_predication_buf(inst); + if (err) + goto error_deinit; + + mtk_vcodec_debug(inst, "H264 Instance >> %p", inst); + + *h_vdec = (unsigned long)inst; + return 0; + +error_deinit: + vpu_dec_deinit(&inst->vpu); + +error_free_inst: + kfree(inst); + return err; +} + +static void vdec_h264_deinit(unsigned long h_vdec) +{ + struct vdec_h264_inst *inst = (struct vdec_h264_inst *)h_vdec; + + mtk_vcodec_debug_enter(inst); + + vpu_dec_deinit(&inst->vpu); + free_predication_buf(inst); + free_mv_buf(inst); + + kfree(inst); +} + +static int find_start_code(unsigned char *data, unsigned int data_sz) +{ + if (data_sz > 3 && data[0] == 0 && data[1] == 0 && data[2] == 1) + return 3; + + if (data_sz > 4 && data[0] == 0 && data[1] == 0 && data[2] == 0 && + data[3] == 1) + return 4; + + return -1; +} + +static int vdec_h264_decode(unsigned long h_vdec, struct mtk_vcodec_mem *bs, + struct vdec_fb *fb, bool *res_chg) +{ + struct vdec_h264_inst *inst = (struct vdec_h264_inst *)h_vdec; + struct vdec_vpu_inst *vpu = &inst->vpu; + int nal_start_idx = 0; + int err = 0; + unsigned int nal_start; + unsigned int nal_type; + unsigned char *buf; + unsigned int buf_sz; + unsigned int data[2]; + uint64_t vdec_fb_va = (u64)(uintptr_t)fb; + uint64_t y_fb_dma = fb ? (u64)fb->base_y.dma_addr : 0; + uint64_t c_fb_dma = fb ? (u64)fb->base_c.dma_addr : 0; + + mtk_vcodec_debug(inst, "+ [%d] FB y_dma=%llx c_dma=%llx va=%p", + ++inst->num_nalu, y_fb_dma, c_fb_dma, fb); + + /* bs NULL means flush decoder */ + if (bs == NULL) + return vpu_dec_reset(vpu); + + buf = (unsigned char *)bs->va; + buf_sz = bs->size; + nal_start_idx = find_start_code(buf, buf_sz); + if (nal_start_idx < 0) + goto err_free_fb_out; + + nal_start = buf[nal_start_idx]; + nal_type = NAL_TYPE(buf[nal_start_idx]); + mtk_vcodec_debug(inst, "\n + NALU[%d] type %d +\n", inst->num_nalu, + nal_type); + + if (nal_type == NAL_H264_PPS) { + buf_sz -= nal_start_idx; + if (buf_sz > HDR_PARSING_BUF_SZ) { + err = -EILSEQ; + goto err_free_fb_out; + } + memcpy(inst->vsi->hdr_buf, buf + nal_start_idx, buf_sz); + } + + inst->vsi->dec.bs_dma = (uint64_t)bs->dma_addr; + inst->vsi->dec.y_fb_dma = y_fb_dma; + inst->vsi->dec.c_fb_dma = c_fb_dma; + inst->vsi->dec.vdec_fb_va = vdec_fb_va; + + data[0] = buf_sz; + data[1] = nal_start; + err = vpu_dec_start(vpu, data, 2); + if (err) + goto err_free_fb_out; + + *res_chg = inst->vsi->dec.resolution_changed; + if (*res_chg) { + struct vdec_pic_info pic; + + mtk_vcodec_debug(inst, "- resolution changed -"); + get_pic_info(inst, &pic); + + if (inst->vsi->dec.realloc_mv_buf) { + err = alloc_mv_buf(inst, &pic); + if (err) + goto err_free_fb_out; + } + } + + if (nal_type == NAL_NON_IDR_SLICE || nal_type == NAL_IDR_SLICE) { + /* wait decoder done interrupt */ + err = mtk_vcodec_wait_for_done_ctx(inst->ctx, + MTK_INST_IRQ_RECEIVED, + WAIT_INTR_TIMEOUT_MS); + if (err) + goto err_free_fb_out; + + vpu_dec_end(vpu); + } + + mtk_vcodec_debug(inst, "\n - NALU[%d] type=%d -\n", inst->num_nalu, + nal_type); + return 0; + +err_free_fb_out: + put_fb_to_free(inst, fb); + mtk_vcodec_err(inst, "\n - NALU[%d] err=%d -\n", inst->num_nalu, err); + return err; +} + +static void vdec_h264_get_fb(struct vdec_h264_inst *inst, + struct h264_ring_fb_list *list, + bool disp_list, struct vdec_fb **out_fb) +{ + struct vdec_fb *fb; + + if (check_list_validity(inst, disp_list)) + return; + + if (list->count == 0) { + mtk_vcodec_debug(inst, "[FB] there is no %s fb", + disp_list ? "disp" : "free"); + *out_fb = NULL; + return; + } + + fb = (struct vdec_fb *) + (uintptr_t)list->fb_list[list->read_idx].vdec_fb_va; + fb->status |= (disp_list ? FB_ST_DISPLAY : FB_ST_FREE); + + *out_fb = fb; + mtk_vcodec_debug(inst, "[FB] get %s fb st=%d poc=%d %llx", + disp_list ? "disp" : "free", + fb->status, list->fb_list[list->read_idx].poc, + list->fb_list[list->read_idx].vdec_fb_va); + + list->read_idx = (list->read_idx == H264_MAX_FB_NUM - 1) ? + 0 : list->read_idx + 1; + list->count--; +} + +static int vdec_h264_get_param(unsigned long h_vdec, + enum vdec_get_param_type type, void *out) +{ + struct vdec_h264_inst *inst = (struct vdec_h264_inst *)h_vdec; + + switch (type) { + case GET_PARAM_DISP_FRAME_BUFFER: + vdec_h264_get_fb(inst, &inst->vsi->list_disp, true, out); + break; + + case GET_PARAM_FREE_FRAME_BUFFER: + vdec_h264_get_fb(inst, &inst->vsi->list_free, false, out); + break; + + case GET_PARAM_PIC_INFO: + get_pic_info(inst, out); + break; + + case GET_PARAM_DPB_SIZE: + get_dpb_size(inst, out); + break; + + case GET_PARAM_CROP_INFO: + get_crop_info(inst, out); + break; + + default: + mtk_vcodec_err(inst, "invalid get parameter type=%d", type); + return -EINVAL; + } + + return 0; +} + +static struct vdec_common_if vdec_h264_if = { + vdec_h264_init, + vdec_h264_decode, + vdec_h264_get_param, + vdec_h264_deinit, +}; + +struct vdec_common_if *get_h264_dec_comm_if(void); + +struct vdec_common_if *get_h264_dec_comm_if(void) +{ + return &vdec_h264_if; +} diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c new file mode 100644 index 000000000000..6e7a62ae0842 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c @@ -0,0 +1,634 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Jungchang Tsao <jungchang.tsao@mediatek.com> + * PC Chen <pc.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/slab.h> +#include "../vdec_drv_if.h" +#include "../mtk_vcodec_util.h" +#include "../mtk_vcodec_dec.h" +#include "../mtk_vcodec_intr.h" +#include "../vdec_vpu_if.h" +#include "../vdec_drv_base.h" + +/* Decoding picture buffer size (3 reference frames plus current frame) */ +#define VP8_DPB_SIZE 4 + +/* HW working buffer size (bytes) */ +#define VP8_WORKING_BUF_SZ (45 * 4096) + +/* HW control register address */ +#define VP8_SEGID_DRAM_ADDR 0x3c +#define VP8_HW_VLD_ADDR 0x93C +#define VP8_HW_VLD_VALUE 0x940 +#define VP8_BSASET 0x100 +#define VP8_BSDSET 0x104 +#define VP8_RW_CKEN_SET 0x0 +#define VP8_RW_DCM_CON 0x18 +#define VP8_WO_VLD_SRST 0x108 +#define VP8_RW_MISC_SYS_SEL 0x84 +#define VP8_RW_MISC_SPEC_CON 0xC8 +#define VP8_WO_VLD_SRST 0x108 +#define VP8_RW_VP8_CTRL 0xA4 +#define VP8_RW_MISC_DCM_CON 0xEC +#define VP8_RW_MISC_SRST 0xF4 +#define VP8_RW_MISC_FUNC_CON 0xCC + +#define VP8_MAX_FRM_BUF_NUM 5 +#define VP8_MAX_FRM_BUF_NODE_NUM (VP8_MAX_FRM_BUF_NUM * 2) + +/* required buffer size (bytes) to store decode information */ +#define VP8_HW_SEGMENT_DATA_SZ 272 +#define VP8_HW_SEGMENT_UINT 4 + +#define VP8_DEC_TABLE_PROC_LOOP 96 +#define VP8_DEC_TABLE_UNIT 3 +#define VP8_DEC_TABLE_SZ 300 +#define VP8_DEC_TABLE_OFFSET 2 +#define VP8_DEC_TABLE_RW_UNIT 4 + +/** + * struct vdec_vp8_dec_info - decode misc information + * @working_buf_dma : working buffer dma address + * @prev_y_dma : previous decoded frame buffer Y plane address + * @cur_y_fb_dma : current plane Y frame buffer dma address + * @cur_c_fb_dma : current plane C frame buffer dma address + * @bs_dma : bitstream dma address + * @bs_sz : bitstream size + * @resolution_changed: resolution change flag 1 - changed, 0 - not change + * @show_frame : display this frame or not + * @wait_key_frame : wait key frame coming + */ +struct vdec_vp8_dec_info { + uint64_t working_buf_dma; + uint64_t prev_y_dma; + uint64_t cur_y_fb_dma; + uint64_t cur_c_fb_dma; + uint64_t bs_dma; + uint32_t bs_sz; + uint32_t resolution_changed; + uint32_t show_frame; + uint32_t wait_key_frame; +}; + +/** + * struct vdec_vp8_vsi - VPU shared information + * @dec : decoding information + * @pic : picture information + * @dec_table : decoder coefficient table + * @segment_buf : segmentation buffer + * @load_data : flag to indicate reload decode data + */ +struct vdec_vp8_vsi { + struct vdec_vp8_dec_info dec; + struct vdec_pic_info pic; + uint32_t dec_table[VP8_DEC_TABLE_SZ]; + uint32_t segment_buf[VP8_HW_SEGMENT_DATA_SZ][VP8_HW_SEGMENT_UINT]; + uint32_t load_data; +}; + +/** + * struct vdec_vp8_hw_reg_base - HW register base + * @sys : base address for sys + * @misc : base address for misc + * @ld : base address for ld + * @top : base address for top + * @cm : base address for cm + * @hwd : base address for hwd + * @hwb : base address for hwb + */ +struct vdec_vp8_hw_reg_base { + void __iomem *sys; + void __iomem *misc; + void __iomem *ld; + void __iomem *top; + void __iomem *cm; + void __iomem *hwd; + void __iomem *hwb; +}; + +/** + * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode + * @wq_hd : Wait queue to wait VPU message ack + * @signaled : 1 - Host has received ack message from VPU, 0 - not recevie + * @failure : VPU execution result status 0 - success, others - fail + * @inst_addr : VPU decoder instance address + */ +struct vdec_vp8_vpu_inst { + wait_queue_head_t wq_hd; + int signaled; + int failure; + uint32_t inst_addr; +}; + +/* frame buffer (fb) list + * [available_fb_node_list] - decode fb are initialized to 0 and populated in + * [fb_use_list] - fb is set after decode and is moved to this list + * [fb_free_list] - fb is not needed for reference will be moved from + * [fb_use_list] to [fb_free_list] and + * once user remove fb from [fb_free_list], + * it is circulated back to [available_fb_node_list] + * [fb_disp_list] - fb is set after decode and is moved to this list + * once user remove fb from [fb_disp_list] it is + * circulated back to [available_fb_node_list] + */ + +/** + * struct vdec_vp8_inst - VP8 decoder instance + * @cur_fb : current frame buffer + * @dec_fb : decode frame buffer node + * @available_fb_node_list : list to store available frame buffer node + * @fb_use_list : list to store frame buffer in use + * @fb_free_list : list to store free frame buffer + * @fb_disp_list : list to store display ready frame buffer + * @working_buf : HW decoder working buffer + * @reg_base : HW register base address + * @frm_cnt : decode frame count + * @ctx : V4L2 context + * @dev : platform device + * @vpu : VPU instance for decoder + * @vsi : VPU share information + */ +struct vdec_vp8_inst { + struct vdec_fb *cur_fb; + struct vdec_fb_node dec_fb[VP8_MAX_FRM_BUF_NODE_NUM]; + struct list_head available_fb_node_list; + struct list_head fb_use_list; + struct list_head fb_free_list; + struct list_head fb_disp_list; + struct mtk_vcodec_mem working_buf; + struct vdec_vp8_hw_reg_base reg_base; + unsigned int frm_cnt; + struct mtk_vcodec_ctx *ctx; + struct vdec_vpu_inst vpu; + struct vdec_vp8_vsi *vsi; +}; + +static void get_hw_reg_base(struct vdec_vp8_inst *inst) +{ + inst->reg_base.top = mtk_vcodec_get_reg_addr(inst->ctx, VDEC_TOP); + inst->reg_base.cm = mtk_vcodec_get_reg_addr(inst->ctx, VDEC_CM); + inst->reg_base.hwd = mtk_vcodec_get_reg_addr(inst->ctx, VDEC_HWD); + inst->reg_base.sys = mtk_vcodec_get_reg_addr(inst->ctx, VDEC_SYS); + inst->reg_base.misc = mtk_vcodec_get_reg_addr(inst->ctx, VDEC_MISC); + inst->reg_base.ld = mtk_vcodec_get_reg_addr(inst->ctx, VDEC_LD); + inst->reg_base.hwb = mtk_vcodec_get_reg_addr(inst->ctx, VDEC_HWB); +} + +static void write_hw_segmentation_data(struct vdec_vp8_inst *inst) +{ + int i, j; + u32 seg_id_addr; + u32 val; + void __iomem *cm = inst->reg_base.cm; + struct vdec_vp8_vsi *vsi = inst->vsi; + + seg_id_addr = readl(inst->reg_base.top + VP8_SEGID_DRAM_ADDR) >> 4; + + for (i = 0; i < ARRAY_SIZE(vsi->segment_buf); i++) { + for (j = ARRAY_SIZE(vsi->segment_buf[i]) - 1; j >= 0; j--) { + val = (1 << 16) + ((seg_id_addr + i) << 2) + j; + writel(val, cm + VP8_HW_VLD_ADDR); + + val = vsi->segment_buf[i][j]; + writel(val, cm + VP8_HW_VLD_VALUE); + } + } +} + +static void read_hw_segmentation_data(struct vdec_vp8_inst *inst) +{ + int i, j; + u32 seg_id_addr; + u32 val; + void __iomem *cm = inst->reg_base.cm; + struct vdec_vp8_vsi *vsi = inst->vsi; + + seg_id_addr = readl(inst->reg_base.top + VP8_SEGID_DRAM_ADDR) >> 4; + + for (i = 0; i < ARRAY_SIZE(vsi->segment_buf); i++) { + for (j = ARRAY_SIZE(vsi->segment_buf[i]) - 1; j >= 0; j--) { + val = ((seg_id_addr + i) << 2) + j; + writel(val, cm + VP8_HW_VLD_ADDR); + + val = readl(cm + VP8_HW_VLD_VALUE); + vsi->segment_buf[i][j] = val; + } + } +} + +/* reset HW and enable HW read/write data function */ +static void enable_hw_rw_function(struct vdec_vp8_inst *inst) +{ + u32 val = 0; + void __iomem *sys = inst->reg_base.sys; + void __iomem *misc = inst->reg_base.misc; + void __iomem *ld = inst->reg_base.ld; + void __iomem *hwb = inst->reg_base.hwb; + void __iomem *hwd = inst->reg_base.hwd; + + writel(0x1, sys + VP8_RW_CKEN_SET); + writel(0x101, ld + VP8_WO_VLD_SRST); + writel(0x101, hwb + VP8_WO_VLD_SRST); + + writel(1, sys); + val = readl(misc + VP8_RW_MISC_SRST); + writel((val & 0xFFFFFFFE), misc + VP8_RW_MISC_SRST); + + writel(0x1, misc + VP8_RW_MISC_SYS_SEL); + writel(0x17F, misc + VP8_RW_MISC_SPEC_CON); + writel(0x71201100, misc + VP8_RW_MISC_FUNC_CON); + writel(0x0, ld + VP8_WO_VLD_SRST); + writel(0x0, hwb + VP8_WO_VLD_SRST); + writel(0x1, sys + VP8_RW_DCM_CON); + writel(0x1, misc + VP8_RW_MISC_DCM_CON); + writel(0x1, hwd + VP8_RW_VP8_CTRL); +} + +static void store_dec_table(struct vdec_vp8_inst *inst) +{ + int i, j; + u32 addr = 0, val = 0; + void __iomem *hwd = inst->reg_base.hwd; + u32 *p = &inst->vsi->dec_table[VP8_DEC_TABLE_OFFSET]; + + for (i = 0; i < VP8_DEC_TABLE_PROC_LOOP; i++) { + writel(addr, hwd + VP8_BSASET); + for (j = 0; j < VP8_DEC_TABLE_UNIT ; j++) { + val = *p++; + writel(val, hwd + VP8_BSDSET); + } + addr += VP8_DEC_TABLE_RW_UNIT; + } +} + +static void load_dec_table(struct vdec_vp8_inst *inst) +{ + int i; + u32 addr = 0; + u32 *p = &inst->vsi->dec_table[VP8_DEC_TABLE_OFFSET]; + void __iomem *hwd = inst->reg_base.hwd; + + for (i = 0; i < VP8_DEC_TABLE_PROC_LOOP; i++) { + writel(addr, hwd + VP8_BSASET); + /* read total 11 bytes */ + *p++ = readl(hwd + VP8_BSDSET); + *p++ = readl(hwd + VP8_BSDSET); + *p++ = readl(hwd + VP8_BSDSET) & 0xFFFFFF; + addr += VP8_DEC_TABLE_RW_UNIT; + } +} + +static void get_pic_info(struct vdec_vp8_inst *inst, struct vdec_pic_info *pic) +{ + *pic = inst->vsi->pic; + + mtk_vcodec_debug(inst, "pic(%d, %d), buf(%d, %d)", + pic->pic_w, pic->pic_h, pic->buf_w, pic->buf_h); + mtk_vcodec_debug(inst, "Y(%d, %d), C(%d, %d)", pic->y_bs_sz, + pic->y_len_sz, pic->c_bs_sz, pic->c_len_sz); +} + +static void vp8_dec_finish(struct vdec_vp8_inst *inst) +{ + struct vdec_fb_node *node; + uint64_t prev_y_dma = inst->vsi->dec.prev_y_dma; + + mtk_vcodec_debug(inst, "prev fb base dma=%llx", prev_y_dma); + + /* put last decode ok frame to fb_free_list */ + if (prev_y_dma != 0) { + list_for_each_entry(node, &inst->fb_use_list, list) { + struct vdec_fb *fb = (struct vdec_fb *)node->fb; + + if (prev_y_dma == (uint64_t)fb->base_y.dma_addr) { + list_move_tail(&node->list, + &inst->fb_free_list); + break; + } + } + } + + /* available_fb_node_list -> fb_use_list */ + node = list_first_entry(&inst->available_fb_node_list, + struct vdec_fb_node, list); + node->fb = inst->cur_fb; + list_move_tail(&node->list, &inst->fb_use_list); + + /* available_fb_node_list -> fb_disp_list */ + if (inst->vsi->dec.show_frame) { + node = list_first_entry(&inst->available_fb_node_list, + struct vdec_fb_node, list); + node->fb = inst->cur_fb; + list_move_tail(&node->list, &inst->fb_disp_list); + } +} + +static void move_fb_list_use_to_free(struct vdec_vp8_inst *inst) +{ + struct vdec_fb_node *node, *tmp; + + list_for_each_entry_safe(node, tmp, &inst->fb_use_list, list) + list_move_tail(&node->list, &inst->fb_free_list); +} + +static void init_list(struct vdec_vp8_inst *inst) +{ + int i; + + INIT_LIST_HEAD(&inst->available_fb_node_list); + INIT_LIST_HEAD(&inst->fb_use_list); + INIT_LIST_HEAD(&inst->fb_free_list); + INIT_LIST_HEAD(&inst->fb_disp_list); + + for (i = 0; i < ARRAY_SIZE(inst->dec_fb); i++) { + INIT_LIST_HEAD(&inst->dec_fb[i].list); + inst->dec_fb[i].fb = NULL; + list_add_tail(&inst->dec_fb[i].list, + &inst->available_fb_node_list); + } +} + +static void add_fb_to_free_list(struct vdec_vp8_inst *inst, void *fb) +{ + struct vdec_fb_node *node; + + if (fb) { + node = list_first_entry(&inst->available_fb_node_list, + struct vdec_fb_node, list); + node->fb = fb; + list_move_tail(&node->list, &inst->fb_free_list); + } +} + +static int alloc_working_buf(struct vdec_vp8_inst *inst) +{ + int err; + struct mtk_vcodec_mem *mem = &inst->working_buf; + + mem->size = VP8_WORKING_BUF_SZ; + err = mtk_vcodec_mem_alloc(inst->ctx, mem); + if (err) { + mtk_vcodec_err(inst, "Cannot allocate working buffer"); + return err; + } + + inst->vsi->dec.working_buf_dma = (uint64_t)mem->dma_addr; + return 0; +} + +static void free_working_buf(struct vdec_vp8_inst *inst) +{ + struct mtk_vcodec_mem *mem = &inst->working_buf; + + if (mem->va) + mtk_vcodec_mem_free(inst->ctx, mem); + + inst->vsi->dec.working_buf_dma = 0; +} + +static int vdec_vp8_init(struct mtk_vcodec_ctx *ctx, unsigned long *h_vdec) +{ + struct vdec_vp8_inst *inst; + int err; + + inst = kzalloc(sizeof(*inst), GFP_KERNEL); + if (!inst) + return -ENOMEM; + + inst->ctx = ctx; + + inst->vpu.id = IPI_VDEC_VP8; + inst->vpu.dev = ctx->dev->vpu_plat_dev; + inst->vpu.ctx = ctx; + inst->vpu.handler = vpu_dec_ipi_handler; + + err = vpu_dec_init(&inst->vpu); + if (err) { + mtk_vcodec_err(inst, "vdec_vp8 init err=%d", err); + goto error_free_inst; + } + + inst->vsi = (struct vdec_vp8_vsi *)inst->vpu.vsi; + init_list(inst); + err = alloc_working_buf(inst); + if (err) + goto error_deinit; + + get_hw_reg_base(inst); + mtk_vcodec_debug(inst, "VP8 Instance >> %p", inst); + + *h_vdec = (unsigned long)inst; + return 0; + +error_deinit: + vpu_dec_deinit(&inst->vpu); +error_free_inst: + kfree(inst); + return err; +} + +static int vdec_vp8_decode(unsigned long h_vdec, struct mtk_vcodec_mem *bs, + struct vdec_fb *fb, bool *res_chg) +{ + struct vdec_vp8_inst *inst = (struct vdec_vp8_inst *)h_vdec; + struct vdec_vp8_dec_info *dec = &inst->vsi->dec; + struct vdec_vpu_inst *vpu = &inst->vpu; + unsigned char *bs_va; + unsigned int data; + int err = 0; + uint64_t y_fb_dma; + uint64_t c_fb_dma; + + /* bs NULL means flush decoder */ + if (bs == NULL) { + move_fb_list_use_to_free(inst); + return vpu_dec_reset(vpu); + } + + y_fb_dma = fb ? (u64)fb->base_y.dma_addr : 0; + c_fb_dma = fb ? (u64)fb->base_c.dma_addr : 0; + + mtk_vcodec_debug(inst, "+ [%d] FB y_dma=%llx c_dma=%llx fb=%p", + inst->frm_cnt, y_fb_dma, c_fb_dma, fb); + + inst->cur_fb = fb; + dec->bs_dma = (unsigned long)bs->dma_addr; + dec->bs_sz = bs->size; + dec->cur_y_fb_dma = y_fb_dma; + dec->cur_c_fb_dma = c_fb_dma; + + mtk_vcodec_debug(inst, "\n + FRAME[%d] +\n", inst->frm_cnt); + + write_hw_segmentation_data(inst); + enable_hw_rw_function(inst); + store_dec_table(inst); + + bs_va = (unsigned char *)bs->va; + + /* retrieve width/hight and scale info from header */ + data = (*(bs_va + 9) << 24) | (*(bs_va + 8) << 16) | + (*(bs_va + 7) << 8) | *(bs_va + 6); + err = vpu_dec_start(vpu, &data, 1); + if (err) { + add_fb_to_free_list(inst, fb); + if (dec->wait_key_frame) { + mtk_vcodec_debug(inst, "wait key frame !"); + return 0; + } + + goto error; + } + + if (dec->resolution_changed) { + mtk_vcodec_debug(inst, "- resolution_changed -"); + *res_chg = true; + add_fb_to_free_list(inst, fb); + return 0; + } + + /* wait decoder done interrupt */ + mtk_vcodec_wait_for_done_ctx(inst->ctx, MTK_INST_IRQ_RECEIVED, + WAIT_INTR_TIMEOUT_MS); + + if (inst->vsi->load_data) + load_dec_table(inst); + + vp8_dec_finish(inst); + read_hw_segmentation_data(inst); + + err = vpu_dec_end(vpu); + if (err) + goto error; + + mtk_vcodec_debug(inst, "\n - FRAME[%d] - show=%d\n", inst->frm_cnt, + dec->show_frame); + inst->frm_cnt++; + *res_chg = false; + return 0; + +error: + mtk_vcodec_err(inst, "\n - FRAME[%d] - err=%d\n", inst->frm_cnt, err); + return err; +} + +static void get_disp_fb(struct vdec_vp8_inst *inst, struct vdec_fb **out_fb) +{ + struct vdec_fb_node *node; + struct vdec_fb *fb; + + node = list_first_entry_or_null(&inst->fb_disp_list, + struct vdec_fb_node, list); + if (node) { + list_move_tail(&node->list, &inst->available_fb_node_list); + fb = (struct vdec_fb *)node->fb; + fb->status |= FB_ST_DISPLAY; + mtk_vcodec_debug(inst, "[FB] get disp fb %p st=%d", + node->fb, fb->status); + } else { + fb = NULL; + mtk_vcodec_debug(inst, "[FB] there is no disp fb"); + } + + *out_fb = fb; +} + +static void get_free_fb(struct vdec_vp8_inst *inst, struct vdec_fb **out_fb) +{ + struct vdec_fb_node *node; + struct vdec_fb *fb; + + node = list_first_entry_or_null(&inst->fb_free_list, + struct vdec_fb_node, list); + if (node) { + list_move_tail(&node->list, &inst->available_fb_node_list); + fb = (struct vdec_fb *)node->fb; + fb->status |= FB_ST_FREE; + mtk_vcodec_debug(inst, "[FB] get free fb %p st=%d", + node->fb, fb->status); + } else { + fb = NULL; + mtk_vcodec_debug(inst, "[FB] there is no free fb"); + } + + *out_fb = fb; +} + +static void get_crop_info(struct vdec_vp8_inst *inst, struct v4l2_rect *cr) +{ + cr->left = 0; + cr->top = 0; + cr->width = inst->vsi->pic.pic_w; + cr->height = inst->vsi->pic.pic_h; + mtk_vcodec_debug(inst, "get crop info l=%d, t=%d, w=%d, h=%d", + cr->left, cr->top, cr->width, cr->height); +} + +static int vdec_vp8_get_param(unsigned long h_vdec, + enum vdec_get_param_type type, void *out) +{ + struct vdec_vp8_inst *inst = (struct vdec_vp8_inst *)h_vdec; + + switch (type) { + case GET_PARAM_DISP_FRAME_BUFFER: + get_disp_fb(inst, out); + break; + + case GET_PARAM_FREE_FRAME_BUFFER: + get_free_fb(inst, out); + break; + + case GET_PARAM_PIC_INFO: + get_pic_info(inst, out); + break; + + case GET_PARAM_CROP_INFO: + get_crop_info(inst, out); + break; + + case GET_PARAM_DPB_SIZE: + *((unsigned int *)out) = VP8_DPB_SIZE; + break; + + default: + mtk_vcodec_err(inst, "invalid get parameter type=%d", type); + return -EINVAL; + } + + return 0; +} + +static void vdec_vp8_deinit(unsigned long h_vdec) +{ + struct vdec_vp8_inst *inst = (struct vdec_vp8_inst *)h_vdec; + + mtk_vcodec_debug_enter(inst); + + vpu_dec_deinit(&inst->vpu); + free_working_buf(inst); + kfree(inst); +} + +static struct vdec_common_if vdec_vp8_if = { + vdec_vp8_init, + vdec_vp8_decode, + vdec_vp8_get_param, + vdec_vp8_deinit, +}; + +struct vdec_common_if *get_vp8_dec_comm_if(void); + +struct vdec_common_if *get_vp8_dec_comm_if(void) +{ + return &vdec_vp8_if; +} diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c new file mode 100644 index 000000000000..e91a3b425b0c --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c @@ -0,0 +1,967 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Daniel Hsiao <daniel.hsiao@mediatek.com> + * Kai-Sean Yang <kai-sean.yang@mediatek.com> + * Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/fs.h> +#include <linux/slab.h> +#include <linux/syscalls.h> +#include <linux/delay.h> +#include <linux/time.h> + +#include "../mtk_vcodec_intr.h" +#include "../vdec_drv_base.h" +#include "../vdec_vpu_if.h" + +#define VP9_SUPER_FRAME_BS_SZ 64 +#define MAX_VP9_DPB_SIZE 9 + +#define REFS_PER_FRAME 3 +#define MAX_NUM_REF_FRAMES 8 +#define VP9_MAX_FRM_BUF_NUM 9 +#define VP9_MAX_FRM_BUF_NODE_NUM (VP9_MAX_FRM_BUF_NUM * 2) + +/** + * struct vp9_dram_buf - contains buffer info for vpu + * @va : cpu address + * @pa : iova address + * @sz : buffer size + * @padding : for 64 bytes alignment + */ +struct vp9_dram_buf { + unsigned long va; + unsigned long pa; + unsigned int sz; + unsigned int padding; +}; + +/** + * struct vp9_fb_info - contains frame buffer info + * @fb : frmae buffer + * @reserved : reserved field used by vpu + */ +struct vp9_fb_info { + struct vdec_fb *fb; + unsigned int reserved[32]; +}; + +/** + * struct vp9_ref_cnt_buf - contains reference buffer information + * @buf : referenced frame buffer + * @ref_cnt : referenced frame buffer's reference count. + * When reference count=0, remove it from reference list + */ +struct vp9_ref_cnt_buf { + struct vp9_fb_info buf; + unsigned int ref_cnt; +}; + +/** + * struct vp9_fb_info - contains current frame's reference buffer information + * @buf : reference buffer + * @idx : reference buffer index to frm_bufs + * @reserved : reserved field used by vpu + */ +struct vp9_ref_buf { + struct vp9_fb_info *buf; + unsigned int idx; + unsigned int reserved[6]; +}; + +/** + * struct vp9_fb_info - contains frame buffer info + * @fb : super frame reference frame buffer + * @used : this reference frame info entry is used + * @padding : for 64 bytes size align + */ +struct vp9_sf_ref_fb { + struct vdec_fb fb; + int used; + int padding; +}; + +/* + * struct vdec_vp9_vsi - shared buffer between host and VPU firmware + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item + * @sf_bs_buf : super frame backup buffer (AP-W, VPU-R) + * @sf_ref_fb : record supoer frame reference buffer information + * (AP-R/W, VPU-R/W) + * @sf_next_ref_fb_idx : next available super frame (AP-W, VPU-R) + * @sf_frm_cnt : super frame count, filled by vpu (AP-R, VPU-W) + * @sf_frm_offset : super frame offset, filled by vpu (AP-R, VPU-W) + * @sf_frm_sz : super frame size, filled by vpu (AP-R, VPU-W) + * @sf_frm_idx : current super frame (AP-R, VPU-W) + * @sf_init : inform super frame info already parsed by vpu (AP-R, VPU-W) + * @fb : capture buffer (AP-W, VPU-R) + * @bs : bs buffer (AP-W, VPU-R) + * @cur_fb : current show capture buffer (AP-R/W, VPU-R/W) + * @pic_w : picture width (AP-R, VPU-W) + * @pic_h : picture height (AP-R, VPU-W) + * @buf_w : codec width (AP-R, VPU-W) + * @buf_h : coded height (AP-R, VPU-W) + * @buf_sz_y_bs : ufo compressed y plane size (AP-R, VPU-W) + * @buf_sz_c_bs : ufo compressed cbcr plane size (AP-R, VPU-W) + * @buf_len_sz_y : size used to store y plane ufo info (AP-R, VPU-W) + * @buf_len_sz_c : size used to store cbcr plane ufo info (AP-R, VPU-W) + + * @profile : profile sparsed from vpu (AP-R, VPU-W) + * @show_frame : display this frame or not (AP-R, VPU-W) + * @show_existing_frame : inform this frame is show existing frame + * (AP-R, VPU-W) + * @frm_to_show_idx : index to show frame (AP-R, VPU-W) + + * @refresh_frm_flags : indicate when frame need to refine reference count + * (AP-R, VPU-W) + * @resolution_changed : resolution change in this frame (AP-R, VPU-W) + + * @frm_bufs : maintain reference buffer info (AP-R/W, VPU-R/W) + * @ref_frm_map : maintain reference buffer map info (AP-R/W, VPU-R/W) + * @new_fb_idx : index to frm_bufs array (AP-R, VPU-W) + * @frm_num : decoded frame number, include sub-frame count (AP-R, VPU-W) + * @mv_buf : motion vector working buffer (AP-W, VPU-R) + * @frm_refs : maintain three reference buffer info (AP-R/W, VPU-R/W) + */ +struct vdec_vp9_vsi { + unsigned char sf_bs_buf[VP9_SUPER_FRAME_BS_SZ]; + struct vp9_sf_ref_fb sf_ref_fb[VP9_MAX_FRM_BUF_NUM-1]; + int sf_next_ref_fb_idx; + unsigned int sf_frm_cnt; + unsigned int sf_frm_offset[VP9_MAX_FRM_BUF_NUM-1]; + unsigned int sf_frm_sz[VP9_MAX_FRM_BUF_NUM-1]; + unsigned int sf_frm_idx; + unsigned int sf_init; + struct vdec_fb fb; + struct mtk_vcodec_mem bs; + struct vdec_fb cur_fb; + unsigned int pic_w; + unsigned int pic_h; + unsigned int buf_w; + unsigned int buf_h; + unsigned int buf_sz_y_bs; + unsigned int buf_sz_c_bs; + unsigned int buf_len_sz_y; + unsigned int buf_len_sz_c; + unsigned int profile; + unsigned int show_frame; + unsigned int show_existing_frame; + unsigned int frm_to_show_idx; + unsigned int refresh_frm_flags; + unsigned int resolution_changed; + + struct vp9_ref_cnt_buf frm_bufs[VP9_MAX_FRM_BUF_NUM]; + int ref_frm_map[MAX_NUM_REF_FRAMES]; + unsigned int new_fb_idx; + unsigned int frm_num; + struct vp9_dram_buf mv_buf; + + struct vp9_ref_buf frm_refs[REFS_PER_FRAME]; +}; + +/* + * struct vdec_vp9_inst - vp9 decode instance + * @mv_buf : working buffer for mv + * @dec_fb : vdec_fb node to link fb to different fb_xxx_list + * @available_fb_node_list : current available vdec_fb node + * @fb_use_list : current used or referenced vdec_fb + * @fb_free_list : current available to free vdec_fb + * @fb_disp_list : current available to display vdec_fb + * @cur_fb : current frame buffer + * @ctx : current decode context + * @vpu : vpu instance information + * @vsi : shared buffer between host and VPU firmware + * @total_frm_cnt : total frame count, it do not include sub-frames in super + * frame + * @mem : instance memory information + */ +struct vdec_vp9_inst { + struct mtk_vcodec_mem mv_buf; + + struct vdec_fb_node dec_fb[VP9_MAX_FRM_BUF_NODE_NUM]; + struct list_head available_fb_node_list; + struct list_head fb_use_list; + struct list_head fb_free_list; + struct list_head fb_disp_list; + struct vdec_fb *cur_fb; + struct mtk_vcodec_ctx *ctx; + struct vdec_vpu_inst vpu; + struct vdec_vp9_vsi *vsi; + unsigned int total_frm_cnt; + struct mtk_vcodec_mem mem; +}; + +static bool vp9_is_sf_ref_fb(struct vdec_vp9_inst *inst, struct vdec_fb *fb) +{ + int i; + struct vdec_vp9_vsi *vsi = inst->vsi; + + for (i = 0; i < ARRAY_SIZE(vsi->sf_ref_fb); i++) { + if (fb == &vsi->sf_ref_fb[i].fb) + return true; + } + return false; +} + +static struct vdec_fb *vp9_rm_from_fb_use_list(struct vdec_vp9_inst + *inst, void *addr) +{ + struct vdec_fb *fb = NULL; + struct vdec_fb_node *node; + + list_for_each_entry(node, &inst->fb_use_list, list) { + fb = (struct vdec_fb *)node->fb; + if (fb->base_y.va == addr) { + list_move_tail(&node->list, + &inst->available_fb_node_list); + break; + } + } + return fb; +} + +static void vp9_add_to_fb_free_list(struct vdec_vp9_inst *inst, + struct vdec_fb *fb) +{ + struct vdec_fb_node *node; + + if (fb) { + node = list_first_entry_or_null(&inst->available_fb_node_list, + struct vdec_fb_node, list); + + if (node) { + node->fb = fb; + list_move_tail(&node->list, &inst->fb_free_list); + } + } else { + mtk_vcodec_debug(inst, "No free fb node"); + } +} + +static void vp9_free_sf_ref_fb(struct vdec_fb *fb) +{ + struct vp9_sf_ref_fb *sf_ref_fb = + container_of(fb, struct vp9_sf_ref_fb, fb); + + sf_ref_fb->used = 0; +} + +static void vp9_ref_cnt_fb(struct vdec_vp9_inst *inst, int *idx, + int new_idx) +{ + struct vdec_vp9_vsi *vsi = inst->vsi; + int ref_idx = *idx; + + if (ref_idx >= 0 && vsi->frm_bufs[ref_idx].ref_cnt > 0) { + vsi->frm_bufs[ref_idx].ref_cnt--; + + if (vsi->frm_bufs[ref_idx].ref_cnt == 0) { + if (!vp9_is_sf_ref_fb(inst, + vsi->frm_bufs[ref_idx].buf.fb)) { + struct vdec_fb *fb; + + fb = vp9_rm_from_fb_use_list(inst, + vsi->frm_bufs[ref_idx].buf.fb->base_y.va); + vp9_add_to_fb_free_list(inst, fb); + } else + vp9_free_sf_ref_fb( + vsi->frm_bufs[ref_idx].buf.fb); + } + } + + *idx = new_idx; + vsi->frm_bufs[new_idx].ref_cnt++; +} + +static void vp9_free_all_sf_ref_fb(struct vdec_vp9_inst *inst) +{ + int i; + struct vdec_vp9_vsi *vsi = inst->vsi; + + for (i = 0; i < ARRAY_SIZE(vsi->sf_ref_fb); i++) { + if (vsi->sf_ref_fb[i].fb.base_y.va) { + mtk_vcodec_mem_free(inst->ctx, + &vsi->sf_ref_fb[i].fb.base_y); + mtk_vcodec_mem_free(inst->ctx, + &vsi->sf_ref_fb[i].fb.base_c); + vsi->sf_ref_fb[i].used = 0; + } + } +} + +/* For each sub-frame except the last one, the driver will dynamically + * allocate reference buffer by calling vp9_get_sf_ref_fb() + * The last sub-frame will use the original fb provided by the + * vp9_dec_decode() interface + */ +static int vp9_get_sf_ref_fb(struct vdec_vp9_inst *inst) +{ + int idx; + struct mtk_vcodec_mem *mem_basy_y; + struct mtk_vcodec_mem *mem_basy_c; + struct vdec_vp9_vsi *vsi = inst->vsi; + + for (idx = 0; + idx < ARRAY_SIZE(vsi->sf_ref_fb); + idx++) { + if (vsi->sf_ref_fb[idx].fb.base_y.va && + vsi->sf_ref_fb[idx].used == 0) { + return idx; + } + } + + for (idx = 0; + idx < ARRAY_SIZE(vsi->sf_ref_fb); + idx++) { + if (vsi->sf_ref_fb[idx].fb.base_y.va == NULL) + break; + } + + if (idx == ARRAY_SIZE(vsi->sf_ref_fb)) { + mtk_vcodec_err(inst, "List Full"); + return -1; + } + + mem_basy_y = &vsi->sf_ref_fb[idx].fb.base_y; + mem_basy_y->size = vsi->buf_sz_y_bs + + vsi->buf_len_sz_y; + + if (mtk_vcodec_mem_alloc(inst->ctx, mem_basy_y)) { + mtk_vcodec_err(inst, "Cannot allocate sf_ref_buf y_buf"); + return -1; + } + + mem_basy_c = &vsi->sf_ref_fb[idx].fb.base_c; + mem_basy_c->size = vsi->buf_sz_c_bs + + vsi->buf_len_sz_c; + + if (mtk_vcodec_mem_alloc(inst->ctx, mem_basy_c)) { + mtk_vcodec_err(inst, "Cannot allocate sf_ref_fb c_buf"); + return -1; + } + vsi->sf_ref_fb[idx].used = 0; + + return idx; +} + +static bool vp9_alloc_work_buf(struct vdec_vp9_inst *inst) +{ + struct vdec_vp9_vsi *vsi = inst->vsi; + int result; + struct mtk_vcodec_mem *mem; + + unsigned int max_pic_w; + unsigned int max_pic_h; + + + if (!(inst->ctx->dev->dec_capability & + VCODEC_CAPABILITY_4K_DISABLED)) { + max_pic_w = VCODEC_DEC_4K_CODED_WIDTH; + max_pic_h = VCODEC_DEC_4K_CODED_HEIGHT; + } else { + max_pic_w = MTK_VDEC_MAX_W; + max_pic_h = MTK_VDEC_MAX_H; + } + + if ((vsi->pic_w > max_pic_w) || + (vsi->pic_h > max_pic_h)) { + mtk_vcodec_err(inst, "Invalid w/h %d/%d", + vsi->pic_w, vsi->pic_h); + return false; + } + + mtk_vcodec_debug(inst, "BUF CHG(%d): w/h/sb_w/sb_h=%d/%d/%d/%d", + vsi->resolution_changed, + vsi->pic_w, + vsi->pic_h, + vsi->buf_w, + vsi->buf_h); + + mem = &inst->mv_buf; + + if (mem->va) + mtk_vcodec_mem_free(inst->ctx, mem); + + mem->size = ((vsi->buf_w / 64) * + (vsi->buf_h / 64) + 2) * 36 * 16; + + result = mtk_vcodec_mem_alloc(inst->ctx, mem); + if (result) { + mem->size = 0; + mtk_vcodec_err(inst, "Cannot allocate mv_buf"); + return false; + } + /* Set the va again */ + vsi->mv_buf.va = (unsigned long)mem->va; + vsi->mv_buf.pa = (unsigned long)mem->dma_addr; + vsi->mv_buf.sz = (unsigned int)mem->size; + + vp9_free_all_sf_ref_fb(inst); + vsi->sf_next_ref_fb_idx = vp9_get_sf_ref_fb(inst); + + return true; +} + +static bool vp9_add_to_fb_disp_list(struct vdec_vp9_inst *inst, + struct vdec_fb *fb) +{ + struct vdec_fb_node *node; + + if (!fb) { + mtk_vcodec_err(inst, "fb == NULL"); + return false; + } + + node = list_first_entry_or_null(&inst->available_fb_node_list, + struct vdec_fb_node, list); + if (node) { + node->fb = fb; + list_move_tail(&node->list, &inst->fb_disp_list); + } else { + mtk_vcodec_err(inst, "No available fb node"); + return false; + } + + return true; +} + +/* If any buffer updating is signaled it should be done here. */ +static void vp9_swap_frm_bufs(struct vdec_vp9_inst *inst) +{ + struct vdec_vp9_vsi *vsi = inst->vsi; + struct vp9_fb_info *frm_to_show; + int ref_index = 0, mask; + + for (mask = vsi->refresh_frm_flags; mask; mask >>= 1) { + if (mask & 1) + vp9_ref_cnt_fb(inst, &vsi->ref_frm_map[ref_index], + vsi->new_fb_idx); + ++ref_index; + } + + frm_to_show = &vsi->frm_bufs[vsi->new_fb_idx].buf; + vsi->frm_bufs[vsi->new_fb_idx].ref_cnt--; + + if (frm_to_show->fb != inst->cur_fb) { + /* This frame is show exist frame and no decode output + * copy frame data from frm_to_show to current CAPTURE + * buffer + */ + if ((frm_to_show->fb != NULL) && + (inst->cur_fb->base_y.size >= + frm_to_show->fb->base_y.size)) { + memcpy((void *)inst->cur_fb->base_y.va, + (void *)frm_to_show->fb->base_y.va, + vsi->buf_w * + vsi->buf_h); + memcpy((void *)inst->cur_fb->base_c.va, + (void *)frm_to_show->fb->base_c.va, + vsi->buf_w * + vsi->buf_h / 2); + } else { + /* After resolution change case, current CAPTURE buffer + * may have less buffer size than frm_to_show buffer + * size + */ + if (frm_to_show->fb != NULL) + mtk_vcodec_err(inst, + "inst->cur_fb->base_y.size=%zu, frm_to_show->fb.base_y.size=%zu", + inst->cur_fb->base_y.size, + frm_to_show->fb->base_y.size); + } + if (!vp9_is_sf_ref_fb(inst, inst->cur_fb)) { + if (vsi->show_frame) + vp9_add_to_fb_disp_list(inst, inst->cur_fb); + } + } else { + if (!vp9_is_sf_ref_fb(inst, inst->cur_fb)) { + if (vsi->show_frame) + vp9_add_to_fb_disp_list(inst, frm_to_show->fb); + } + } + + /* when ref_cnt ==0, move this fb to fb_free_list. v4l2 driver will + * clean fb_free_list + */ + if (vsi->frm_bufs[vsi->new_fb_idx].ref_cnt == 0) { + if (!vp9_is_sf_ref_fb( + inst, vsi->frm_bufs[vsi->new_fb_idx].buf.fb)) { + struct vdec_fb *fb; + + fb = vp9_rm_from_fb_use_list(inst, + vsi->frm_bufs[vsi->new_fb_idx].buf.fb->base_y.va); + + vp9_add_to_fb_free_list(inst, fb); + } else { + vp9_free_sf_ref_fb( + vsi->frm_bufs[vsi->new_fb_idx].buf.fb); + } + } + + /* if this super frame and it is not last sub-frame, get next fb for + * sub-frame decode + */ + if (vsi->sf_frm_cnt > 0 && vsi->sf_frm_idx != vsi->sf_frm_cnt - 1) + vsi->sf_next_ref_fb_idx = vp9_get_sf_ref_fb(inst); +} + +static bool vp9_wait_dec_end(struct vdec_vp9_inst *inst) +{ + struct mtk_vcodec_ctx *ctx = inst->ctx; + + mtk_vcodec_wait_for_done_ctx(inst->ctx, + MTK_INST_IRQ_RECEIVED, + WAIT_INTR_TIMEOUT_MS); + + if (ctx->irq_status & MTK_VDEC_IRQ_STATUS_DEC_SUCCESS) + return true; + else + return false; +} + +static struct vdec_vp9_inst *vp9_alloc_inst(struct mtk_vcodec_ctx *ctx) +{ + int result; + struct mtk_vcodec_mem mem; + struct vdec_vp9_inst *inst; + + memset(&mem, 0, sizeof(mem)); + mem.size = sizeof(struct vdec_vp9_inst); + result = mtk_vcodec_mem_alloc(ctx, &mem); + if (result) + return NULL; + + inst = mem.va; + inst->mem = mem; + + return inst; +} + +static void vp9_free_inst(struct vdec_vp9_inst *inst) +{ + struct mtk_vcodec_mem mem; + + mem = inst->mem; + if (mem.va) + mtk_vcodec_mem_free(inst->ctx, &mem); +} + +static bool vp9_decode_end_proc(struct vdec_vp9_inst *inst) +{ + struct vdec_vp9_vsi *vsi = inst->vsi; + bool ret = false; + + if (!vsi->show_existing_frame) { + ret = vp9_wait_dec_end(inst); + if (!ret) { + mtk_vcodec_err(inst, "Decode failed, Decode Timeout @[%d]", + vsi->frm_num); + return false; + } + + if (vpu_dec_end(&inst->vpu)) { + mtk_vcodec_err(inst, "vp9_dec_vpu_end failed"); + return false; + } + mtk_vcodec_debug(inst, "Decode Ok @%d (%d/%d)", vsi->frm_num, + vsi->pic_w, vsi->pic_h); + } else { + mtk_vcodec_debug(inst, "Decode Ok @%d (show_existing_frame)", + vsi->frm_num); + } + + vp9_swap_frm_bufs(inst); + vsi->frm_num++; + return true; +} + +static bool vp9_is_last_sub_frm(struct vdec_vp9_inst *inst) +{ + struct vdec_vp9_vsi *vsi = inst->vsi; + + if (vsi->sf_frm_cnt <= 0 || vsi->sf_frm_idx == vsi->sf_frm_cnt) + return true; + + return false; +} + +static struct vdec_fb *vp9_rm_from_fb_disp_list(struct vdec_vp9_inst *inst) +{ + struct vdec_fb_node *node; + struct vdec_fb *fb = NULL; + + node = list_first_entry_or_null(&inst->fb_disp_list, + struct vdec_fb_node, list); + if (node) { + fb = (struct vdec_fb *)node->fb; + fb->status |= FB_ST_DISPLAY; + list_move_tail(&node->list, &inst->available_fb_node_list); + mtk_vcodec_debug(inst, "[FB] get disp fb %p st=%d", + node->fb, fb->status); + } else + mtk_vcodec_debug(inst, "[FB] there is no disp fb"); + + return fb; +} + +static bool vp9_add_to_fb_use_list(struct vdec_vp9_inst *inst, + struct vdec_fb *fb) +{ + struct vdec_fb_node *node; + + if (!fb) { + mtk_vcodec_debug(inst, "fb == NULL"); + return false; + } + + node = list_first_entry_or_null(&inst->available_fb_node_list, + struct vdec_fb_node, list); + if (node) { + node->fb = fb; + list_move_tail(&node->list, &inst->fb_use_list); + } else { + mtk_vcodec_err(inst, "No free fb node"); + return false; + } + return true; +} + +static void vp9_reset(struct vdec_vp9_inst *inst) +{ + struct vdec_fb_node *node, *tmp; + + list_for_each_entry_safe(node, tmp, &inst->fb_use_list, list) + list_move_tail(&node->list, &inst->fb_free_list); + + vp9_free_all_sf_ref_fb(inst); + inst->vsi->sf_next_ref_fb_idx = vp9_get_sf_ref_fb(inst); + + if (vpu_dec_reset(&inst->vpu)) + mtk_vcodec_err(inst, "vp9_dec_vpu_reset failed"); + + /* Set the va again, since vpu_dec_reset will clear mv_buf in vpu */ + inst->vsi->mv_buf.va = (unsigned long)inst->mv_buf.va; + inst->vsi->mv_buf.pa = (unsigned long)inst->mv_buf.dma_addr; + inst->vsi->mv_buf.sz = (unsigned long)inst->mv_buf.size; +} + +static void init_all_fb_lists(struct vdec_vp9_inst *inst) +{ + int i; + + INIT_LIST_HEAD(&inst->available_fb_node_list); + INIT_LIST_HEAD(&inst->fb_use_list); + INIT_LIST_HEAD(&inst->fb_free_list); + INIT_LIST_HEAD(&inst->fb_disp_list); + + for (i = 0; i < ARRAY_SIZE(inst->dec_fb); i++) { + INIT_LIST_HEAD(&inst->dec_fb[i].list); + inst->dec_fb[i].fb = NULL; + list_add_tail(&inst->dec_fb[i].list, + &inst->available_fb_node_list); + } +} + +static void get_pic_info(struct vdec_vp9_inst *inst, struct vdec_pic_info *pic) +{ + pic->y_bs_sz = inst->vsi->buf_sz_y_bs; + pic->c_bs_sz = inst->vsi->buf_sz_c_bs; + pic->y_len_sz = inst->vsi->buf_len_sz_y; + pic->c_len_sz = inst->vsi->buf_len_sz_c; + + pic->pic_w = inst->vsi->pic_w; + pic->pic_h = inst->vsi->pic_h; + pic->buf_w = inst->vsi->buf_w; + pic->buf_h = inst->vsi->buf_h; + + mtk_vcodec_debug(inst, "pic(%d, %d), buf(%d, %d)", + pic->pic_w, pic->pic_h, pic->buf_w, pic->buf_h); + mtk_vcodec_debug(inst, "Y(%d, %d), C(%d, %d)", pic->y_bs_sz, + pic->y_len_sz, pic->c_bs_sz, pic->c_len_sz); +} + +static void get_disp_fb(struct vdec_vp9_inst *inst, struct vdec_fb **out_fb) +{ + + *out_fb = vp9_rm_from_fb_disp_list(inst); + if (*out_fb) + (*out_fb)->status |= FB_ST_DISPLAY; +} + +static void get_free_fb(struct vdec_vp9_inst *inst, struct vdec_fb **out_fb) +{ + struct vdec_fb_node *node; + struct vdec_fb *fb = NULL; + + node = list_first_entry_or_null(&inst->fb_free_list, + struct vdec_fb_node, list); + if (node) { + list_move_tail(&node->list, &inst->available_fb_node_list); + fb = (struct vdec_fb *)node->fb; + fb->status |= FB_ST_FREE; + mtk_vcodec_debug(inst, "[FB] get free fb %p st=%d", + node->fb, fb->status); + } else { + mtk_vcodec_debug(inst, "[FB] there is no free fb"); + } + + *out_fb = fb; +} + +static void vdec_vp9_deinit(unsigned long h_vdec) +{ + struct vdec_vp9_inst *inst = (struct vdec_vp9_inst *)h_vdec; + struct mtk_vcodec_mem *mem; + int ret = 0; + + ret = vpu_dec_deinit(&inst->vpu); + if (ret) + mtk_vcodec_err(inst, "vpu_dec_deinit failed"); + + mem = &inst->mv_buf; + if (mem->va) + mtk_vcodec_mem_free(inst->ctx, mem); + + vp9_free_all_sf_ref_fb(inst); + vp9_free_inst(inst); +} + +static int vdec_vp9_init(struct mtk_vcodec_ctx *ctx, unsigned long *h_vdec) +{ + struct vdec_vp9_inst *inst; + + inst = vp9_alloc_inst(ctx); + if (!inst) + return -ENOMEM; + + inst->total_frm_cnt = 0; + inst->ctx = ctx; + + inst->vpu.id = IPI_VDEC_VP9; + inst->vpu.dev = ctx->dev->vpu_plat_dev; + inst->vpu.ctx = ctx; + inst->vpu.handler = vpu_dec_ipi_handler; + + if (vpu_dec_init(&inst->vpu)) { + mtk_vcodec_err(inst, "vp9_dec_vpu_init failed"); + goto err_deinit_inst; + } + + inst->vsi = (struct vdec_vp9_vsi *)inst->vpu.vsi; + init_all_fb_lists(inst); + + (*h_vdec) = (unsigned long)inst; + return 0; + +err_deinit_inst: + vp9_free_inst(inst); + + return -EINVAL; +} + +static int vdec_vp9_decode(unsigned long h_vdec, struct mtk_vcodec_mem *bs, + struct vdec_fb *fb, bool *res_chg) +{ + int ret = 0; + struct vdec_vp9_inst *inst = (struct vdec_vp9_inst *)h_vdec; + struct vdec_vp9_vsi *vsi = inst->vsi; + u32 data[3]; + int i; + + *res_chg = false; + + if ((bs == NULL) && (fb == NULL)) { + mtk_vcodec_debug(inst, "[EOS]"); + vp9_reset(inst); + return ret; + } + + if (bs == NULL) { + mtk_vcodec_err(inst, "bs == NULL"); + return -EINVAL; + } + + mtk_vcodec_debug(inst, "Input BS Size = %zu", bs->size); + + while (1) { + struct vdec_fb *cur_fb = NULL; + + data[0] = *((unsigned int *)bs->va); + data[1] = *((unsigned int *)(bs->va + 4)); + data[2] = *((unsigned int *)(bs->va + 8)); + + vsi->bs = *bs; + + if (fb) + vsi->fb = *fb; + + if (!vsi->sf_init) { + unsigned int sf_bs_sz; + unsigned int sf_bs_off; + unsigned char *sf_bs_src; + unsigned char *sf_bs_dst; + + sf_bs_sz = bs->size > VP9_SUPER_FRAME_BS_SZ ? + VP9_SUPER_FRAME_BS_SZ : bs->size; + sf_bs_off = VP9_SUPER_FRAME_BS_SZ - sf_bs_sz; + sf_bs_src = bs->va + bs->size - sf_bs_sz; + sf_bs_dst = vsi->sf_bs_buf + sf_bs_off; + memcpy(sf_bs_dst, sf_bs_src, sf_bs_sz); + } else { + if ((vsi->sf_frm_cnt > 0) && + (vsi->sf_frm_idx < vsi->sf_frm_cnt)) { + unsigned int idx = vsi->sf_frm_idx; + + memcpy((void *)bs->va, + (void *)(bs->va + + vsi->sf_frm_offset[idx]), + vsi->sf_frm_sz[idx]); + } + } + ret = vpu_dec_start(&inst->vpu, data, 3); + if (ret) { + mtk_vcodec_err(inst, "vpu_dec_start failed"); + goto DECODE_ERROR; + } + + if (vsi->resolution_changed) { + if (!vp9_alloc_work_buf(inst)) { + ret = -EINVAL; + goto DECODE_ERROR; + } + } + + if (vsi->sf_frm_cnt > 0) { + cur_fb = &vsi->sf_ref_fb[vsi->sf_next_ref_fb_idx].fb; + + if (vsi->sf_frm_idx < vsi->sf_frm_cnt) + inst->cur_fb = cur_fb; + else + inst->cur_fb = fb; + } else { + inst->cur_fb = fb; + } + + vsi->frm_bufs[vsi->new_fb_idx].buf.fb = inst->cur_fb; + if (!vp9_is_sf_ref_fb(inst, inst->cur_fb)) + vp9_add_to_fb_use_list(inst, inst->cur_fb); + + mtk_vcodec_debug(inst, "[#pic %d]", vsi->frm_num); + + if (vsi->show_existing_frame) + mtk_vcodec_debug(inst, + "drv->new_fb_idx=%d, drv->frm_to_show_idx=%d", + vsi->new_fb_idx, vsi->frm_to_show_idx); + + if (vsi->show_existing_frame && (vsi->frm_to_show_idx < + VP9_MAX_FRM_BUF_NUM)) { + mtk_vcodec_err(inst, + "Skip Decode drv->new_fb_idx=%d, drv->frm_to_show_idx=%d", + vsi->new_fb_idx, vsi->frm_to_show_idx); + + vp9_ref_cnt_fb(inst, &vsi->new_fb_idx, + vsi->frm_to_show_idx); + ret = -EINVAL; + goto DECODE_ERROR; + } + + /* VPU assign the buffer pointer in its address space, + * reassign here + */ + for (i = 0; i < ARRAY_SIZE(vsi->frm_refs); i++) { + unsigned int idx = vsi->frm_refs[i].idx; + + vsi->frm_refs[i].buf = &vsi->frm_bufs[idx].buf; + } + + if (vsi->resolution_changed) { + *res_chg = true; + mtk_vcodec_debug(inst, "VDEC_ST_RESOLUTION_CHANGED"); + + ret = 0; + goto DECODE_ERROR; + } + + if (vp9_decode_end_proc(inst) != true) { + mtk_vcodec_err(inst, "vp9_decode_end_proc"); + ret = -EINVAL; + goto DECODE_ERROR; + } + + if (vp9_is_last_sub_frm(inst)) + break; + + } + inst->total_frm_cnt++; + +DECODE_ERROR: + if (ret < 0) + vp9_add_to_fb_free_list(inst, fb); + + return ret; +} + +static void get_crop_info(struct vdec_vp9_inst *inst, struct v4l2_rect *cr) +{ + cr->left = 0; + cr->top = 0; + cr->width = inst->vsi->pic_w; + cr->height = inst->vsi->pic_h; + mtk_vcodec_debug(inst, "get crop info l=%d, t=%d, w=%d, h=%d\n", + cr->left, cr->top, cr->width, cr->height); +} + +static int vdec_vp9_get_param(unsigned long h_vdec, + enum vdec_get_param_type type, void *out) +{ + struct vdec_vp9_inst *inst = (struct vdec_vp9_inst *)h_vdec; + int ret = 0; + + switch (type) { + case GET_PARAM_DISP_FRAME_BUFFER: + get_disp_fb(inst, out); + break; + case GET_PARAM_FREE_FRAME_BUFFER: + get_free_fb(inst, out); + break; + case GET_PARAM_PIC_INFO: + get_pic_info(inst, out); + break; + case GET_PARAM_DPB_SIZE: + *((unsigned int *)out) = MAX_VP9_DPB_SIZE; + break; + case GET_PARAM_CROP_INFO: + get_crop_info(inst, out); + break; + default: + mtk_vcodec_err(inst, "not supported param type %d", type); + ret = -EINVAL; + break; + } + + return ret; +} + +static struct vdec_common_if vdec_vp9_if = { + vdec_vp9_init, + vdec_vp9_decode, + vdec_vp9_get_param, + vdec_vp9_deinit, +}; + +struct vdec_common_if *get_vp9_dec_comm_if(void); + +struct vdec_common_if *get_vp9_dec_comm_if(void) +{ + return &vdec_vp9_if; +} diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_base.h b/drivers/media/platform/mtk-vcodec/vdec_drv_base.h new file mode 100644 index 000000000000..7e4c1a92bbd8 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_base.h @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _VDEC_DRV_BASE_ +#define _VDEC_DRV_BASE_ + +#include "mtk_vcodec_drv.h" + +#include "vdec_drv_if.h" + +struct vdec_common_if { + /** + * (*init)() - initialize decode driver + * @ctx : [in] mtk v4l2 context + * @h_vdec : [out] driver handle + */ + int (*init)(struct mtk_vcodec_ctx *ctx, unsigned long *h_vdec); + + /** + * (*decode)() - trigger decode + * @h_vdec : [in] driver handle + * @bs : [in] input bitstream + * @fb : [in] frame buffer to store decoded frame + * @res_chg : [out] resolution change happen + */ + int (*decode)(unsigned long h_vdec, struct mtk_vcodec_mem *bs, + struct vdec_fb *fb, bool *res_chg); + + /** + * (*get_param)() - get driver's parameter + * @h_vdec : [in] driver handle + * @type : [in] input parameter type + * @out : [out] buffer to store query result + */ + int (*get_param)(unsigned long h_vdec, enum vdec_get_param_type type, + void *out); + + /** + * (*deinit)() - deinitialize driver. + * @h_vdec : [in] driver handle to be deinit + */ + void (*deinit)(unsigned long h_vdec); +}; + +#endif diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.c b/drivers/media/platform/mtk-vcodec/vdec_drv_if.c new file mode 100644 index 000000000000..5ffc468dd910 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.c @@ -0,0 +1,122 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/slab.h> + +#include "vdec_drv_if.h" +#include "mtk_vcodec_dec.h" +#include "vdec_drv_base.h" +#include "mtk_vcodec_dec_pm.h" +#include "mtk_vpu.h" + +const struct vdec_common_if *get_h264_dec_comm_if(void); +const struct vdec_common_if *get_vp8_dec_comm_if(void); +const struct vdec_common_if *get_vp9_dec_comm_if(void); + +int vdec_if_init(struct mtk_vcodec_ctx *ctx, unsigned int fourcc) +{ + int ret = 0; + + switch (fourcc) { + case V4L2_PIX_FMT_H264: + ctx->dec_if = get_h264_dec_comm_if(); + break; + case V4L2_PIX_FMT_VP8: + ctx->dec_if = get_vp8_dec_comm_if(); + break; + case V4L2_PIX_FMT_VP9: + ctx->dec_if = get_vp9_dec_comm_if(); + break; + default: + return -EINVAL; + } + + mtk_vdec_lock(ctx); + mtk_vcodec_dec_clock_on(&ctx->dev->pm); + ret = ctx->dec_if->init(ctx, &ctx->drv_handle); + mtk_vcodec_dec_clock_off(&ctx->dev->pm); + mtk_vdec_unlock(ctx); + + return ret; +} + +int vdec_if_decode(struct mtk_vcodec_ctx *ctx, struct mtk_vcodec_mem *bs, + struct vdec_fb *fb, bool *res_chg) +{ + int ret = 0; + + if (bs) { + if ((bs->dma_addr & 63) != 0) { + mtk_v4l2_err("bs dma_addr should 64 byte align"); + return -EINVAL; + } + } + + if (fb) { + if (((fb->base_y.dma_addr & 511) != 0) || + ((fb->base_c.dma_addr & 511) != 0)) { + mtk_v4l2_err("frame buffer dma_addr should 512 byte align"); + return -EINVAL; + } + } + + if (ctx->drv_handle == 0) + return -EIO; + + mtk_vdec_lock(ctx); + + mtk_vcodec_set_curr_ctx(ctx->dev, ctx); + mtk_vcodec_dec_clock_on(&ctx->dev->pm); + enable_irq(ctx->dev->dec_irq); + ret = ctx->dec_if->decode(ctx->drv_handle, bs, fb, res_chg); + disable_irq(ctx->dev->dec_irq); + mtk_vcodec_dec_clock_off(&ctx->dev->pm); + mtk_vcodec_set_curr_ctx(ctx->dev, NULL); + + mtk_vdec_unlock(ctx); + + return ret; +} + +int vdec_if_get_param(struct mtk_vcodec_ctx *ctx, enum vdec_get_param_type type, + void *out) +{ + int ret = 0; + + if (ctx->drv_handle == 0) + return -EIO; + + mtk_vdec_lock(ctx); + ret = ctx->dec_if->get_param(ctx->drv_handle, type, out); + mtk_vdec_unlock(ctx); + + return ret; +} + +void vdec_if_deinit(struct mtk_vcodec_ctx *ctx) +{ + if (ctx->drv_handle == 0) + return; + + mtk_vdec_lock(ctx); + mtk_vcodec_dec_clock_on(&ctx->dev->pm); + ctx->dec_if->deinit(ctx->drv_handle); + mtk_vcodec_dec_clock_off(&ctx->dev->pm); + mtk_vdec_unlock(ctx); + + ctx->drv_handle = 0; +} diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h new file mode 100644 index 000000000000..db6b5205ffb1 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * Tiffany Lin <tiffany.lin@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _VDEC_DRV_IF_H_ +#define _VDEC_DRV_IF_H_ + +#include "mtk_vcodec_drv.h" +#include "mtk_vcodec_dec.h" +#include "mtk_vcodec_util.h" + + +/** + * struct vdec_fb_status - decoder frame buffer status + * @FB_ST_NORMAL : initial state + * @FB_ST_DISPLAY : frmae buffer is ready to be displayed + * @FB_ST_FREE : frame buffer is not used by decoder any more + */ +enum vdec_fb_status { + FB_ST_NORMAL = 0, + FB_ST_DISPLAY = (1 << 0), + FB_ST_FREE = (1 << 1) +}; + +/* For GET_PARAM_DISP_FRAME_BUFFER and GET_PARAM_FREE_FRAME_BUFFER, + * the caller does not own the returned buffer. The buffer will not be + * released before vdec_if_deinit. + * GET_PARAM_DISP_FRAME_BUFFER : get next displayable frame buffer, + * struct vdec_fb** + * GET_PARAM_FREE_FRAME_BUFFER : get non-referenced framebuffer, vdec_fb** + * GET_PARAM_PIC_INFO : get picture info, struct vdec_pic_info* + * GET_PARAM_CROP_INFO : get crop info, struct v4l2_crop* + * GET_PARAM_DPB_SIZE : get dpb size, unsigned int* + */ +enum vdec_get_param_type { + GET_PARAM_DISP_FRAME_BUFFER, + GET_PARAM_FREE_FRAME_BUFFER, + GET_PARAM_PIC_INFO, + GET_PARAM_CROP_INFO, + GET_PARAM_DPB_SIZE +}; + +/** + * struct vdec_fb_node - decoder frame buffer node + * @list : list to hold this node + * @fb : point to frame buffer (vdec_fb), fb could point to frame buffer and + * working buffer this is for maintain buffers in different state + */ +struct vdec_fb_node { + struct list_head list; + struct vdec_fb *fb; +}; + +/** + * vdec_if_init() - initialize decode driver + * @ctx : [in] v4l2 context + * @fourcc : [in] video format fourcc, V4L2_PIX_FMT_H264/VP8/VP9.. + */ +int vdec_if_init(struct mtk_vcodec_ctx *ctx, unsigned int fourcc); + +/** + * vdec_if_deinit() - deinitialize decode driver + * @ctx : [in] v4l2 context + * + */ +void vdec_if_deinit(struct mtk_vcodec_ctx *ctx); + +/** + * vdec_if_decode() - trigger decode + * @ctx : [in] v4l2 context + * @bs : [in] input bitstream + * @fb : [in] frame buffer to store decoded frame, when null menas parse + * header only + * @res_chg : [out] resolution change happens if current bs have different + * picture width/height + * Note: To flush the decoder when reaching EOF, set input bitstream as NULL. + */ +int vdec_if_decode(struct mtk_vcodec_ctx *ctx, struct mtk_vcodec_mem *bs, + struct vdec_fb *fb, bool *res_chg); + +/** + * vdec_if_get_param() - get driver's parameter + * @ctx : [in] v4l2 context + * @type : [in] input parameter type + * @out : [out] buffer to store query result + */ +int vdec_if_get_param(struct mtk_vcodec_ctx *ctx, enum vdec_get_param_type type, + void *out); + +#endif diff --git a/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h b/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h new file mode 100644 index 000000000000..5a8a629f4ac9 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h @@ -0,0 +1,103 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or + * modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _VDEC_IPI_MSG_H_ +#define _VDEC_IPI_MSG_H_ + +/** + * enum vdec_ipi_msgid - message id between AP and VPU + * @AP_IPIMSG_XXX : AP to VPU cmd message id + * @VPU_IPIMSG_XXX_ACK : VPU ack AP cmd message id + */ +enum vdec_ipi_msgid { + AP_IPIMSG_DEC_INIT = 0xA000, + AP_IPIMSG_DEC_START = 0xA001, + AP_IPIMSG_DEC_END = 0xA002, + AP_IPIMSG_DEC_DEINIT = 0xA003, + AP_IPIMSG_DEC_RESET = 0xA004, + + VPU_IPIMSG_DEC_INIT_ACK = 0xB000, + VPU_IPIMSG_DEC_START_ACK = 0xB001, + VPU_IPIMSG_DEC_END_ACK = 0xB002, + VPU_IPIMSG_DEC_DEINIT_ACK = 0xB003, + VPU_IPIMSG_DEC_RESET_ACK = 0xB004, +}; + +/** + * struct vdec_ap_ipi_cmd - generic AP to VPU ipi command format + * @msg_id : vdec_ipi_msgid + * @vpu_inst_addr : VPU decoder instance address + */ +struct vdec_ap_ipi_cmd { + uint32_t msg_id; + uint32_t vpu_inst_addr; +}; + +/** + * struct vdec_vpu_ipi_ack - generic VPU to AP ipi command format + * @msg_id : vdec_ipi_msgid + * @status : VPU exeuction result + * @ap_inst_addr : AP video decoder instance address + */ +struct vdec_vpu_ipi_ack { + uint32_t msg_id; + int32_t status; + uint64_t ap_inst_addr; +}; + +/** + * struct vdec_ap_ipi_init - for AP_IPIMSG_DEC_INIT + * @msg_id : AP_IPIMSG_DEC_INIT + * @reserved : Reserved field + * @ap_inst_addr : AP video decoder instance address + */ +struct vdec_ap_ipi_init { + uint32_t msg_id; + uint32_t reserved; + uint64_t ap_inst_addr; +}; + +/** + * struct vdec_ap_ipi_dec_start - for AP_IPIMSG_DEC_START + * @msg_id : AP_IPIMSG_DEC_START + * @vpu_inst_addr : VPU decoder instance address + * @data : Header info + * H264 decoder [0]:buf_sz [1]:nal_start + * VP8 decoder [0]:width/height + * VP9 decoder [0]:profile, [1][2] width/height + * @reserved : Reserved field + */ +struct vdec_ap_ipi_dec_start { + uint32_t msg_id; + uint32_t vpu_inst_addr; + uint32_t data[3]; + uint32_t reserved; +}; + +/** + * struct vdec_vpu_ipi_init_ack - for VPU_IPIMSG_DEC_INIT_ACK + * @msg_id : VPU_IPIMSG_DEC_INIT_ACK + * @status : VPU exeuction result + * @ap_inst_addr : AP vcodec_vpu_inst instance address + * @vpu_inst_addr : VPU decoder instance address + */ +struct vdec_vpu_ipi_init_ack { + uint32_t msg_id; + int32_t status; + uint64_t ap_inst_addr; + uint32_t vpu_inst_addr; +}; + +#endif diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c new file mode 100644 index 000000000000..5a24c51aebb7 --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.c @@ -0,0 +1,170 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mtk_vcodec_drv.h" +#include "mtk_vcodec_util.h" +#include "vdec_ipi_msg.h" +#include "vdec_vpu_if.h" + +static void handle_init_ack_msg(struct vdec_vpu_ipi_init_ack *msg) +{ + struct vdec_vpu_inst *vpu = (struct vdec_vpu_inst *) + (unsigned long)msg->ap_inst_addr; + + mtk_vcodec_debug(vpu, "+ ap_inst_addr = 0x%llx", msg->ap_inst_addr); + + /* mapping VPU address to kernel virtual address */ + /* the content in vsi is initialized to 0 in VPU */ + vpu->vsi = vpu_mapping_dm_addr(vpu->dev, msg->vpu_inst_addr); + vpu->inst_addr = msg->vpu_inst_addr; + + mtk_vcodec_debug(vpu, "- vpu_inst_addr = 0x%x", vpu->inst_addr); +} + +/* + * This function runs in interrupt context and it means there's an IPI MSG + * from VPU. + */ +void vpu_dec_ipi_handler(void *data, unsigned int len, void *priv) +{ + struct vdec_vpu_ipi_ack *msg = data; + struct vdec_vpu_inst *vpu = (struct vdec_vpu_inst *) + (unsigned long)msg->ap_inst_addr; + + mtk_vcodec_debug(vpu, "+ id=%X", msg->msg_id); + + if (msg->status == 0) { + switch (msg->msg_id) { + case VPU_IPIMSG_DEC_INIT_ACK: + handle_init_ack_msg(data); + break; + + case VPU_IPIMSG_DEC_START_ACK: + case VPU_IPIMSG_DEC_END_ACK: + case VPU_IPIMSG_DEC_DEINIT_ACK: + case VPU_IPIMSG_DEC_RESET_ACK: + break; + + default: + mtk_vcodec_err(vpu, "invalid msg=%X", msg->msg_id); + break; + } + } + + mtk_vcodec_debug(vpu, "- id=%X", msg->msg_id); + vpu->failure = msg->status; + vpu->signaled = 1; +} + +static int vcodec_vpu_send_msg(struct vdec_vpu_inst *vpu, void *msg, int len) +{ + int err; + uint32_t msg_id = *(uint32_t *)msg; + + mtk_vcodec_debug(vpu, "id=%X", msg_id); + + vpu->failure = 0; + vpu->signaled = 0; + + err = vpu_ipi_send(vpu->dev, vpu->id, msg, len); + if (err) { + mtk_vcodec_err(vpu, "send fail vpu_id=%d msg_id=%X status=%d", + vpu->id, msg_id, err); + return err; + } + + return vpu->failure; +} + +static int vcodec_send_ap_ipi(struct vdec_vpu_inst *vpu, unsigned int msg_id) +{ + struct vdec_ap_ipi_cmd msg; + int err = 0; + + mtk_vcodec_debug(vpu, "+ id=%X", msg_id); + + memset(&msg, 0, sizeof(msg)); + msg.msg_id = msg_id; + msg.vpu_inst_addr = vpu->inst_addr; + + err = vcodec_vpu_send_msg(vpu, &msg, sizeof(msg)); + mtk_vcodec_debug(vpu, "- id=%X ret=%d", msg_id, err); + return err; +} + +int vpu_dec_init(struct vdec_vpu_inst *vpu) +{ + struct vdec_ap_ipi_init msg; + int err; + + mtk_vcodec_debug_enter(vpu); + + init_waitqueue_head(&vpu->wq); + + err = vpu_ipi_register(vpu->dev, vpu->id, vpu->handler, "vdec", NULL); + if (err != 0) { + mtk_vcodec_err(vpu, "vpu_ipi_register fail status=%d", err); + return err; + } + + memset(&msg, 0, sizeof(msg)); + msg.msg_id = AP_IPIMSG_DEC_INIT; + msg.ap_inst_addr = (unsigned long)vpu; + + mtk_vcodec_debug(vpu, "vdec_inst=%p", vpu); + + err = vcodec_vpu_send_msg(vpu, (void *)&msg, sizeof(msg)); + mtk_vcodec_debug(vpu, "- ret=%d", err); + return err; +} + +int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len) +{ + struct vdec_ap_ipi_dec_start msg; + int i; + int err = 0; + + mtk_vcodec_debug_enter(vpu); + + if (len > ARRAY_SIZE(msg.data)) { + mtk_vcodec_err(vpu, "invalid len = %d\n", len); + return -EINVAL; + } + + memset(&msg, 0, sizeof(msg)); + msg.msg_id = AP_IPIMSG_DEC_START; + msg.vpu_inst_addr = vpu->inst_addr; + + for (i = 0; i < len; i++) + msg.data[i] = data[i]; + + err = vcodec_vpu_send_msg(vpu, (void *)&msg, sizeof(msg)); + mtk_vcodec_debug(vpu, "- ret=%d", err); + return err; +} + +int vpu_dec_end(struct vdec_vpu_inst *vpu) +{ + return vcodec_send_ap_ipi(vpu, AP_IPIMSG_DEC_END); +} + +int vpu_dec_deinit(struct vdec_vpu_inst *vpu) +{ + return vcodec_send_ap_ipi(vpu, AP_IPIMSG_DEC_DEINIT); +} + +int vpu_dec_reset(struct vdec_vpu_inst *vpu) +{ + return vcodec_send_ap_ipi(vpu, AP_IPIMSG_DEC_RESET); +} diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h new file mode 100644 index 000000000000..0dc9ed01fffe --- /dev/null +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: PC Chen <pc.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _VDEC_VPU_IF_H_ +#define _VDEC_VPU_IF_H_ + +#include "mtk_vpu.h" + +/** + * struct vdec_vpu_inst - VPU instance for video codec + * @ipi_id : ipi id for each decoder + * @vsi : driver structure allocated by VPU side and shared to AP side + * for control and info share + * @failure : VPU execution result status, 0: success, others: fail + * @inst_addr : VPU decoder instance address + * @signaled : 1 - Host has received ack message from VPU, 0 - not received + * @ctx : context for v4l2 layer integration + * @dev : platform device of VPU + * @wq : wait queue to wait VPU message ack + * @handler : ipi handler for each decoder + */ +struct vdec_vpu_inst { + enum ipi_id id; + void *vsi; + int32_t failure; + uint32_t inst_addr; + unsigned int signaled; + struct mtk_vcodec_ctx *ctx; + struct platform_device *dev; + wait_queue_head_t wq; + ipi_handler_t handler; +}; + +/** + * vpu_dec_init - init decoder instance and allocate required resource in VPU. + * + * @vpu: instance for vdec_vpu_inst + */ +int vpu_dec_init(struct vdec_vpu_inst *vpu); + +/** + * vpu_dec_start - start decoding, basically the function will be invoked once + * every frame. + * + * @vpu : instance for vdec_vpu_inst + * @data: meta data to pass bitstream info to VPU decoder + * @len : meta data length + */ +int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len); + +/** + * vpu_dec_end - end decoding, basically the function will be invoked once + * when HW decoding done interrupt received successfully. The + * decoder in VPU will continute to do referene frame management + * and check if there is a new decoded frame available to display. + * + * @vpu : instance for vdec_vpu_inst + */ +int vpu_dec_end(struct vdec_vpu_inst *vpu); + +/** + * vpu_dec_deinit - deinit decoder instance and resource freed in VPU. + * + * @vpu: instance for vdec_vpu_inst + */ +int vpu_dec_deinit(struct vdec_vpu_inst *vpu); + +/** + * vpu_dec_reset - reset decoder, use for flush decoder when end of stream or + * seek. Remainig non displayed frame will be pushed to display. + * + * @vpu: instance for vdec_vpu_inst + */ +int vpu_dec_reset(struct vdec_vpu_inst *vpu); + +/** + * vpu_dec_ipi_handler - Handler for VPU ipi message. + * + * @data: ipi message + * @len : length of ipi message + * @priv: callback private data which is passed by decoder when register. + */ +void vpu_dec_ipi_handler(void *data, unsigned int len, void *priv); + +#endif diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c index c9bf58c97878..463b69c934be 100644 --- a/drivers/media/platform/mtk-vpu/mtk_vpu.c +++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c @@ -134,6 +134,8 @@ struct vpu_wdt { * * @signaled: the signal of vpu initialization completed * @fw_ver: VPU firmware version + * @dec_capability: decoder capability which is not used for now and + * the value is reserved for future use * @enc_capability: encoder capability which is not used for now and * the value is reserved for future use * @wq: wait queue for VPU initialization status @@ -141,6 +143,7 @@ struct vpu_wdt { struct vpu_run { u32 signaled; char fw_ver[VPU_FW_VER_LEN]; + unsigned int dec_capability; unsigned int enc_capability; wait_queue_head_t wq; }; @@ -415,6 +418,14 @@ int vpu_wdt_reg_handler(struct platform_device *pdev, } EXPORT_SYMBOL_GPL(vpu_wdt_reg_handler); +unsigned int vpu_get_vdec_hw_capa(struct platform_device *pdev) +{ + struct mtk_vpu *vpu = platform_get_drvdata(pdev); + + return vpu->run.dec_capability; +} +EXPORT_SYMBOL_GPL(vpu_get_vdec_hw_capa); + unsigned int vpu_get_venc_hw_capa(struct platform_device *pdev) { struct mtk_vpu *vpu = platform_get_drvdata(pdev); @@ -523,9 +534,9 @@ static int load_requested_vpu(struct mtk_vpu *vpu, int vpu_load_firmware(struct platform_device *pdev) { - struct mtk_vpu *vpu = platform_get_drvdata(pdev); + struct mtk_vpu *vpu; struct device *dev = &pdev->dev; - struct vpu_run *run = &vpu->run; + struct vpu_run *run; const struct firmware *vpu_fw = NULL; int ret; @@ -534,6 +545,9 @@ int vpu_load_firmware(struct platform_device *pdev) return -EINVAL; } + vpu = platform_get_drvdata(pdev); + run = &vpu->run; + mutex_lock(&vpu->vpu_mutex); if (vpu->fw_loaded) { mutex_unlock(&vpu->vpu_mutex); @@ -600,6 +614,7 @@ static void vpu_init_ipi_handler(void *data, unsigned int len, void *priv) vpu->run.signaled = run->signaled; strncpy(vpu->run.fw_ver, run->fw_ver, VPU_FW_VER_LEN); + vpu->run.dec_capability = run->dec_capability; vpu->run.enc_capability = run->enc_capability; wake_up_interruptible(&vpu->run.wq); } @@ -674,7 +689,7 @@ static int vpu_alloc_ext_mem(struct mtk_vpu *vpu, u32 fw_type) GFP_KERNEL); if (!vpu->extmem[fw_type].va) { dev_err(dev, "Failed to allocate the extended program memory\n"); - return PTR_ERR(vpu->extmem[fw_type].va); + return -ENOMEM; } /* Disable extend0. Enable extend1 */ diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.h b/drivers/media/platform/mtk-vpu/mtk_vpu.h index 5ab37f04bdfd..aec0268be3d0 100644 --- a/drivers/media/platform/mtk-vpu/mtk_vpu.h +++ b/drivers/media/platform/mtk-vpu/mtk_vpu.h @@ -31,23 +31,41 @@ typedef void (*ipi_handler_t) (void *data, * enum ipi_id - the id of inter-processor interrupt * * @IPI_VPU_INIT: The interrupt from vpu is to notfiy kernel - VPU initialization completed. - IPI_VPU_INIT is sent from VPU when firmware is - loaded. AP doesn't need to send IPI_VPU_INIT - command to VPU. - For other IPI below, AP should send the request - to VPU to trigger the interrupt. + * VPU initialization completed. + * IPI_VPU_INIT is sent from VPU when firmware is + * loaded. AP doesn't need to send IPI_VPU_INIT + * command to VPU. + * For other IPI below, AP should send the request + * to VPU to trigger the interrupt. + * @IPI_VDEC_H264: The interrupt from vpu is to notify kernel to + * handle H264 vidoe decoder job, and vice versa. + * Decode output format is always MT21 no matter what + * the input format is. + * @IPI_VDEC_VP8: The interrupt from is to notify kernel to + * handle VP8 video decoder job, and vice versa. + * Decode output format is always MT21 no matter what + * the input format is. + * @IPI_VDEC_VP9: The interrupt from vpu is to notify kernel to + * handle VP9 video decoder job, and vice versa. + * Decode output format is always MT21 no matter what + * the input format is. * @IPI_VENC_H264: The interrupt from vpu is to notify kernel to - handle H264 video encoder job, and vice versa. + * handle H264 video encoder job, and vice versa. * @IPI_VENC_VP8: The interrupt fro vpu is to notify kernel to - handle VP8 video encoder job,, and vice versa. + * handle VP8 video encoder job,, and vice versa. + * @IPI_MDP: The interrupt from vpu is to notify kernel to + * handle MDP (Media Data Path) job, and vice versa. * @IPI_MAX: The maximum IPI number */ enum ipi_id { IPI_VPU_INIT = 0, + IPI_VDEC_H264, + IPI_VDEC_VP8, + IPI_VDEC_VP9, IPI_VENC_H264, IPI_VENC_VP8, + IPI_MDP, IPI_MAX, }; @@ -55,10 +73,14 @@ enum ipi_id { * enum rst_id - reset id to register reset function for VPU watchdog timeout * * @VPU_RST_ENC: encoder reset id + * @VPU_RST_DEC: decoder reset id + * @VPU_RST_MDP: MDP (Media Data Path) reset id * @VPU_RST_MAX: maximum reset id */ enum rst_id { VPU_RST_ENC, + VPU_RST_DEC, + VPU_RST_MDP, VPU_RST_MAX, }; @@ -125,6 +147,16 @@ struct platform_device *vpu_get_plat_device(struct platform_device *pdev); int vpu_wdt_reg_handler(struct platform_device *pdev, void vpu_wdt_reset_func(void *), void *priv, enum rst_id id); + +/** + * vpu_get_vdec_hw_capa - get video decoder hardware capability + * + * @pdev: VPU platform device + * + * Return: video decoder hardware capability + **/ +unsigned int vpu_get_vdec_hw_capa(struct platform_device *pdev); + /** * vpu_get_venc_hw_capa - get video encoder hardware capability * diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c index e68d271b10af..03e47e0f778d 100644 --- a/drivers/media/platform/mx2_emmaprp.c +++ b/drivers/media/platform/mx2_emmaprp.c @@ -724,10 +724,10 @@ static int emmaprp_buf_prepare(struct vb2_buffer *vb) q_data = get_q_data(ctx, vb->vb2_queue->type); if (vb2_plane_size(vb, 0) < q_data->sizeimage) { - dprintk(ctx->dev, "%s data will not fit into plane" - "(%lu < %lu)\n", __func__, - vb2_plane_size(vb, 0), - (long)q_data->sizeimage); + dprintk(ctx->dev, + "%s data will not fit into plane(%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), + (long)q_data->sizeimage); return -EINVAL; } @@ -937,7 +937,7 @@ static int emmaprp_probe(struct platform_device *pdev) snprintf(vfd->name, sizeof(vfd->name), "%s", emmaprp_videodev.name); pcdev->vfd = vfd; v4l2_info(&pcdev->v4l2_dev, EMMAPRP_MODULE_NAME - " Device registered as /dev/video%d\n", vfd->num); + " Device registered as /dev/video%d\n", vfd->num); platform_set_drvdata(pdev, pcdev); diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index a31b95cb3b09..4d29860d27b4 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -408,8 +408,8 @@ static int omapvid_setup_overlay(struct omap_vout_device *vout, v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "%s enable=%d addr=%pad width=%d\n height=%d color_mode=%d\n" "rotation=%d mirror=%d posx=%d posy=%d out_width = %d \n" - "out_height=%d rotation_type=%d screen_width=%d\n", - __func__, ovl->is_enabled(ovl), &info.paddr, info.width, info.height, + "out_height=%d rotation_type=%d screen_width=%d\n", __func__, + ovl->is_enabled(ovl), &info.paddr, info.width, info.height, info.color_mode, info.rotation, info.mirror, info.pos_x, info.pos_y, info.out_width, info.out_height, info.rotation_type, info.screen_width); @@ -791,7 +791,8 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q, dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr, size, DMA_TO_DEVICE); if (dma_mapping_error(vout->vid_dev->v4l2_dev.dev, dma_addr)) - v4l2_err(&vout->vid_dev->v4l2_dev, "dma_map_single failed\n"); + v4l2_err(&vout->vid_dev->v4l2_dev, + "dma_map_single failed\n"); vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i]; } @@ -1657,8 +1658,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) /* Turn of the pipeline */ ret = omapvid_apply_changes(vout); if (ret) - v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode in" - " streamoff\n"); + v4l2_err(&vout->vid_dev->v4l2_dev, + "failed to change mode in streamoff\n"); INIT_LIST_HEAD(&vout->dma_queue); ret = videobuf_streamoff(&vout->vbq); @@ -1858,8 +1859,8 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout) vfd = vout->vfd = video_device_alloc(); if (!vfd) { - printk(KERN_ERR VOUT_NAME ": could not allocate" - " video device struct\n"); + printk(KERN_ERR VOUT_NAME + ": could not allocate video device struct\n"); v4l2_ctrl_handler_free(hdl); return -ENOMEM; } @@ -1984,16 +1985,17 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev) */ vfd = vout->vfd; if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) { - dev_err(&pdev->dev, ": Could not register " - "Video for Linux device\n"); + dev_err(&pdev->dev, + ": Could not register Video for Linux device\n"); vfd->minor = -1; ret = -ENODEV; goto error2; } video_set_drvdata(vfd, vout); - dev_info(&pdev->dev, ": registered and initialized" - " video device %d\n", vfd->minor); + dev_info(&pdev->dev, + ": registered and initialized video device %d\n", + vfd->minor); if (k == (pdev->num_resources - 1)) return 0; diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c index b8638e4e1627..92c4e1826356 100644 --- a/drivers/media/platform/omap/omap_vout_vrfb.c +++ b/drivers/media/platform/omap/omap_vout_vrfb.c @@ -139,8 +139,9 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch); if (ret < 0) { vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; - dev_info(&pdev->dev, ": failed to allocate DMA Channel for" - " video%d\n", vfd->minor); + dev_info(&pdev->dev, + ": failed to allocate DMA Channel for video%d\n", + vfd->minor); } init_waitqueue_head(&vout->vrfb_dma_tx.wait); diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index 0321d84addc7..084ecf4aa9a4 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -480,8 +480,8 @@ void omap3isp_hist_dma_done(struct isp_device *isp) omap3isp_stat_pcr_busy(&isp->isp_hist)) { /* Histogram cannot be enabled in this frame anymore */ atomic_set(&isp->isp_hist.buf_err, 1); - dev_dbg(isp->dev, "hist: Out of synchronization with " - "CCDC. Ignoring next buffer.\n"); + dev_dbg(isp->dev, + "hist: Out of synchronization with CCDC. Ignoring next buffer.\n"); } } @@ -2117,23 +2117,18 @@ static int isp_of_parse_nodes(struct device *dev, struct isp_async_subdev *isd; isd = devm_kzalloc(dev, sizeof(*isd), GFP_KERNEL); - if (!isd) { - of_node_put(node); - return -ENOMEM; - } + if (!isd) + goto error; notifier->subdevs[notifier->num_subdevs] = &isd->asd; - if (isp_of_parse_node(dev, node, isd)) { - of_node_put(node); - return -EINVAL; - } + if (isp_of_parse_node(dev, node, isd)) + goto error; isd->asd.match.of.node = of_graph_get_remote_port_parent(node); - of_node_put(node); if (!isd->asd.match.of.node) { dev_warn(dev, "bad remote port parent\n"); - return -EINVAL; + goto error; } isd->asd.match_type = V4L2_ASYNC_MATCH_OF; @@ -2141,6 +2136,10 @@ static int isp_of_parse_nodes(struct device *dev, } return notifier->num_subdevs; + +error: + of_node_put(node); + return -EINVAL; } static int isp_subdev_notifier_bound(struct v4l2_async_notifier *async, diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index 882310eb45cc..7207558d722c 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -151,8 +151,8 @@ static int ccdc_lsc_validate_config(struct isp_ccdc_device *ccdc, } if (lsc_cfg->offset & 3) { - dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of " - "4\n"); + dev_dbg(isp->dev, + "CCDC: LSC: Offset must be a multiple of 4\n"); return -EINVAL; } @@ -416,8 +416,9 @@ static int ccdc_lsc_config(struct isp_ccdc_device *ccdc, return 0; if (update != (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC)) { - dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table " - "need to be supplied\n", __func__); + dev_dbg(to_device(ccdc), + "%s: Both LSC configuration and table need to be supplied\n", + __func__); return -EINVAL; } diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c index f75a1be29d84..7dae2fe0d42d 100644 --- a/drivers/media/platform/omap3isp/ispcsi2.c +++ b/drivers/media/platform/omap3isp/ispcsi2.c @@ -753,8 +753,8 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2) ISPCSI2_PHY_IRQSTATUS); isp_reg_writel(isp, cpxio1_irqstatus, csi2->regs1, ISPCSI2_PHY_IRQSTATUS); - dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ " - "%x\n", cpxio1_irqstatus); + dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ %x\n", + cpxio1_irqstatus); pipe->error = true; } @@ -763,13 +763,8 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2) ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) { - dev_dbg(isp->dev, "CSI2 Err:" - " OCP:%d," - " Short_pack:%d," - " ECC:%d," - " CPXIO2:%d," - " FIFO_OVF:%d," - "\n", + dev_dbg(isp->dev, + "CSI2 Err: OCP:%d, Short_pack:%d, ECC:%d, CPXIO2:%d, FIFO_OVF:%d,\n", (csi2_irqstatus & ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0, (csi2_irqstatus & diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c b/drivers/media/platform/omap3isp/ispcsiphy.c index 495447d66cfd..871d4fe09c7f 100644 --- a/drivers/media/platform/omap3isp/ispcsiphy.c +++ b/drivers/media/platform/omap3isp/ispcsiphy.c @@ -267,8 +267,8 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy) int rval; if (phy->vdd == NULL) { - dev_err(phy->isp->dev, "Power regulator for CSI PHY not " - "available\n"); + dev_err(phy->isp->dev, + "Power regulator for CSI PHY not available\n"); return -ENODEV; } diff --git a/drivers/media/platform/omap3isp/isph3a_aewb.c b/drivers/media/platform/omap3isp/isph3a_aewb.c index ccaf92f39236..d44626f20ac6 100644 --- a/drivers/media/platform/omap3isp/isph3a_aewb.c +++ b/drivers/media/platform/omap3isp/isph3a_aewb.c @@ -304,8 +304,8 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp) aewb_recover_cfg = devm_kzalloc(isp->dev, sizeof(*aewb_recover_cfg), GFP_KERNEL); if (!aewb_recover_cfg) { - dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for " - "recover configuration.\n"); + dev_err(aewb->isp->dev, + "AEWB: cannot allocate memory for recover configuration.\n"); return -ENOMEM; } @@ -321,8 +321,8 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp) aewb_recover_cfg->subsample_hor_inc = OMAP3ISP_AEWB_MIN_SUB_INC; if (h3a_aewb_validate_params(aewb, aewb_recover_cfg)) { - dev_err(aewb->isp->dev, "AEWB: recover configuration is " - "invalid.\n"); + dev_err(aewb->isp->dev, + "AEWB: recover configuration is invalid.\n"); return -EINVAL; } diff --git a/drivers/media/platform/omap3isp/isph3a_af.c b/drivers/media/platform/omap3isp/isph3a_af.c index 92937f7eecef..99bd6cc21d86 100644 --- a/drivers/media/platform/omap3isp/isph3a_af.c +++ b/drivers/media/platform/omap3isp/isph3a_af.c @@ -367,8 +367,8 @@ int omap3isp_h3a_af_init(struct isp_device *isp) af_recover_cfg = devm_kzalloc(isp->dev, sizeof(*af_recover_cfg), GFP_KERNEL); if (!af_recover_cfg) { - dev_err(af->isp->dev, "AF: cannot allocate memory for recover " - "configuration.\n"); + dev_err(af->isp->dev, + "AF: cannot allocate memory for recover configuration.\n"); return -ENOMEM; } @@ -379,8 +379,8 @@ int omap3isp_h3a_af_init(struct isp_device *isp) af_recover_cfg->paxel.v_cnt = OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN; af_recover_cfg->paxel.line_inc = OMAP3ISP_AF_PAXEL_INCREMENT_MIN; if (h3a_af_validate_params(af, af_recover_cfg)) { - dev_err(af->isp->dev, "AF: recover configuration is " - "invalid.\n"); + dev_err(af->isp->dev, + "AF: recover configuration is invalid.\n"); return -EINVAL; } diff --git a/drivers/media/platform/omap3isp/isphist.c b/drivers/media/platform/omap3isp/isphist.c index 7138b043a4aa..a4ed5d140d48 100644 --- a/drivers/media/platform/omap3isp/isphist.c +++ b/drivers/media/platform/omap3isp/isphist.c @@ -18,7 +18,6 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/dmaengine.h> -#include <linux/omap-dmaengine.h> #include <linux/slab.h> #include <linux/uaccess.h> @@ -486,27 +485,30 @@ int omap3isp_hist_init(struct isp_device *isp) hist->isp = isp; if (HIST_CONFIG_DMA) { - struct platform_device *pdev = to_platform_device(isp->dev); - struct resource *res; - unsigned int sig = 0; dma_cap_mask_t mask; + /* + * We need slave capable channel without DMA request line for + * reading out the data. + * For this we can use dma_request_chan_by_mask() as we are + * happy with any channel as long as it is capable of slave + * configuration. + */ dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); + hist->dma_ch = dma_request_chan_by_mask(&mask); + if (IS_ERR(hist->dma_ch)) { + ret = PTR_ERR(hist->dma_ch); + if (ret == -EPROBE_DEFER) + return ret; - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, - "hist"); - if (res) - sig = res->start; - - hist->dma_ch = dma_request_slave_channel_compat(mask, - omap_dma_filter_fn, &sig, isp->dev, "hist"); - if (!hist->dma_ch) + hist->dma_ch = NULL; dev_warn(isp->dev, "hist: DMA channel request failed, using PIO\n"); - else + } else { dev_dbg(isp->dev, "hist: using DMA channel %s\n", dma_chan_name(hist->dma_ch)); + } } hist->ops = &hist_ops; diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c index 1b9217d3b1b6..47cbc7e3d825 100644 --- a/drivers/media/platform/omap3isp/ispstat.c +++ b/drivers/media/platform/omap3isp/ispstat.c @@ -113,8 +113,9 @@ static int isp_stat_buf_check_magic(struct ispstat *stat, ret = 0; if (ret) { - dev_dbg(stat->isp->dev, "%s: beginning magic check does not " - "match.\n", stat->subdev.name); + dev_dbg(stat->isp->dev, + "%s: beginning magic check does not match.\n", + stat->subdev.name); return ret; } @@ -122,8 +123,9 @@ static int isp_stat_buf_check_magic(struct ispstat *stat, for (w = buf->virt_addr + buf_size, end = w + MAGIC_SIZE; w < end; w++) { if (unlikely(*w != MAGIC_NUM)) { - dev_dbg(stat->isp->dev, "%s: ending magic check does " - "not match.\n", stat->subdev.name); + dev_dbg(stat->isp->dev, + "%s: ending magic check does not match.\n", + stat->subdev.name); return -EINVAL; } } @@ -256,9 +258,9 @@ static void isp_stat_buf_next(struct ispstat *stat) { if (unlikely(stat->active_buf)) /* Overwriting unused active buffer */ - dev_dbg(stat->isp->dev, "%s: new buffer requested without " - "queuing active one.\n", - stat->subdev.name); + dev_dbg(stat->isp->dev, + "%s: new buffer requested without queuing active one.\n", + stat->subdev.name); else stat->active_buf = isp_stat_buf_find_oldest_or_empty(stat); } @@ -292,8 +294,9 @@ static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat, return ERR_PTR(-EBUSY); } if (isp_stat_buf_check_magic(stat, buf)) { - dev_dbg(stat->isp->dev, "%s: current buffer has " - "corrupted data\n.", stat->subdev.name); + dev_dbg(stat->isp->dev, + "%s: current buffer has corrupted data\n.", + stat->subdev.name); /* Mark empty because it doesn't have valid data. */ buf->empty = 1; } else { @@ -307,8 +310,9 @@ static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat, spin_unlock_irqrestore(&stat->isp->stat_lock, flags); if (buf->buf_size > data->buf_size) { - dev_warn(stat->isp->dev, "%s: userspace's buffer size is " - "not enough.\n", stat->subdev.name); + dev_warn(stat->isp->dev, + "%s: userspace's buffer size is not enough.\n", + stat->subdev.name); isp_stat_buf_release(stat); return ERR_PTR(-EINVAL); } @@ -531,20 +535,22 @@ int omap3isp_stat_config(struct ispstat *stat, void *new_conf) mutex_lock(&stat->ioctl_lock); - dev_dbg(stat->isp->dev, "%s: configuring module with buffer " - "size=0x%08lx\n", stat->subdev.name, (unsigned long)buf_size); + dev_dbg(stat->isp->dev, + "%s: configuring module with buffer size=0x%08lx\n", + stat->subdev.name, (unsigned long)buf_size); ret = stat->ops->validate_params(stat, new_conf); if (ret) { mutex_unlock(&stat->ioctl_lock); - dev_dbg(stat->isp->dev, "%s: configuration values are " - "invalid.\n", stat->subdev.name); + dev_dbg(stat->isp->dev, "%s: configuration values are invalid.\n", + stat->subdev.name); return ret; } if (buf_size != user_cfg->buf_size) - dev_dbg(stat->isp->dev, "%s: driver has corrected buffer size " - "request to 0x%08lx\n", stat->subdev.name, + dev_dbg(stat->isp->dev, + "%s: driver has corrected buffer size request to 0x%08lx\n", + stat->subdev.name, (unsigned long)user_cfg->buf_size); /* @@ -595,8 +601,9 @@ int omap3isp_stat_config(struct ispstat *stat, void *new_conf) /* Module has a valid configuration. */ stat->configured = 1; - dev_dbg(stat->isp->dev, "%s: module has been successfully " - "configured.\n", stat->subdev.name); + dev_dbg(stat->isp->dev, + "%s: module has been successfully configured.\n", + stat->subdev.name); mutex_unlock(&stat->ioctl_lock); @@ -762,8 +769,8 @@ int omap3isp_stat_enable(struct ispstat *stat, u8 enable) if (!stat->configured && enable) { spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); mutex_unlock(&stat->ioctl_lock); - dev_dbg(stat->isp->dev, "%s: cannot enable module as it's " - "never been successfully configured so far.\n", + dev_dbg(stat->isp->dev, + "%s: cannot enable module as it's never been successfully configured so far.\n", stat->subdev.name); return -EINVAL; } @@ -859,8 +866,8 @@ static void __stat_isr(struct ispstat *stat, int from_dma) if (stat->state == ISPSTAT_ENABLED) { spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); dev_err(stat->isp->dev, - "%s: interrupt occurred when module was still " - "processing a buffer.\n", stat->subdev.name); + "%s: interrupt occurred when module was still processing a buffer.\n", + stat->subdev.name); ret = STAT_NO_BUF; goto out; } else { @@ -964,8 +971,9 @@ static void __stat_isr(struct ispstat *stat, int from_dma) atomic_set(&stat->buf_err, 1); ret = STAT_NO_BUF; - dev_dbg(stat->isp->dev, "%s: cannot process buffer, " - "device is busy.\n", stat->subdev.name); + dev_dbg(stat->isp->dev, + "%s: cannot process buffer, device is busy.\n", + stat->subdev.name); } out: diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c index c12209c701d3..929006f65cc7 100644 --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -2125,17 +2125,22 @@ static int pxa_camera_sensor_bound(struct v4l2_async_notifier *notifier, pix->bytesperline, pix->height); pix->pixelformat = pcdev->current_fmt->host_fmt->fourcc; v4l2_fill_mbus_format(mf, pix, pcdev->current_fmt->code); - err = sensor_call(pcdev, pad, set_fmt, NULL, &format); + + err = sensor_call(pcdev, core, s_power, 1); if (err) goto out; + err = sensor_call(pcdev, pad, set_fmt, NULL, &format); + if (err) + goto out_sensor_poweroff; + v4l2_fill_pix_format(pix, mf); pr_info("%s(): colorspace=0x%x pixfmt=0x%x\n", __func__, pix->colorspace, pix->pixelformat); err = pxa_camera_init_videobuf2(pcdev); if (err) - goto out; + goto out_sensor_poweroff; err = video_register_device(&pcdev->vdev, VFL_TYPE_GRABBER, -1); if (err) { @@ -2146,6 +2151,9 @@ static int pxa_camera_sensor_bound(struct v4l2_async_notifier *notifier, "PXA Camera driver attached to camera %s\n", subdev->name); } + +out_sensor_poweroff: + err = sensor_call(pcdev, core, s_power, 0); out: mutex_unlock(&pcdev->mlock); return err; @@ -2347,8 +2355,7 @@ static int pxa_camera_probe(struct platform_device *pdev) * Platform hasn't set available data widths. This is bad. * Warn and use a default. */ - dev_warn(&pdev->dev, "WARNING! Platform hasn't set available " - "data widths, using default 10 bit\n"); + dev_warn(&pdev->dev, "WARNING! Platform hasn't set available data widths, using default 10 bit\n"); pcdev->platform_flags |= PXA_CAMERA_DATAWIDTH_10; } if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8) @@ -2359,8 +2366,7 @@ static int pxa_camera_probe(struct platform_device *pdev) pcdev->width_flags |= 1 << 9; if (!pcdev->mclk) { dev_warn(&pdev->dev, - "mclk == 0! Please, fix your platform data. " - "Using default 20MHz\n"); + "mclk == 0! Please, fix your platform data. Using default 20MHz\n"); pcdev->mclk = 20000000; } diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c index f3a3f31cdfa9..7146fc5ef168 100644 --- a/drivers/media/platform/rcar-fcp.c +++ b/drivers/media/platform/rcar-fcp.c @@ -169,6 +169,7 @@ static const struct of_device_id rcar_fcp_of_match[] = { { .compatible = "renesas,fcpv" }, { }, }; +MODULE_DEVICE_TABLE(of, rcar_fcp_of_match); static struct platform_driver rcar_fcp_platform_driver = { .probe = rcar_fcp_probe, diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c new file mode 100644 index 000000000000..dd1a6ea17f22 --- /dev/null +++ b/drivers/media/platform/rcar_fdp1.c @@ -0,0 +1,2445 @@ +/* + * Renesas RCar Fine Display Processor + * + * Video format converter and frame deinterlacer device. + * + * Author: Kieran Bingham, <kieran@bingham.xyz> + * Copyright (c) 2016 Renesas Electronics Corporation. + * + * This code is developed and inspired from the vim2m, rcar_jpu, + * m2m-deinterlace, and vsp1 drivers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <media/rcar-fcp.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-mem2mem.h> +#include <media/videobuf2-dma-contig.h> + +static unsigned int debug; +module_param(debug, uint, 0644); +MODULE_PARM_DESC(debug, "activate debug info"); + +/* Minimum and maximum frame width/height */ +#define FDP1_MIN_W 80U +#define FDP1_MIN_H 80U + +#define FDP1_MAX_W 3840U +#define FDP1_MAX_H 2160U + +#define FDP1_MAX_PLANES 3U +#define FDP1_MAX_STRIDE 8190U + +/* Flags that indicate a format can be used for capture/output */ +#define FDP1_CAPTURE BIT(0) +#define FDP1_OUTPUT BIT(1) + +#define DRIVER_NAME "rcar_fdp1" + +/* Number of Job's to have available on the processing queue */ +#define FDP1_NUMBER_JOBS 8 + +#define dprintk(fdp1, fmt, arg...) \ + v4l2_dbg(1, debug, &fdp1->v4l2_dev, "%s: " fmt, __func__, ## arg) + +/* + * FDP1 registers and bits + */ + +/* FDP1 start register - Imm */ +#define FD1_CTL_CMD 0x0000 +#define FD1_CTL_CMD_STRCMD BIT(0) + +/* Sync generator register - Imm */ +#define FD1_CTL_SGCMD 0x0004 +#define FD1_CTL_SGCMD_SGEN BIT(0) + +/* Register set end register - Imm */ +#define FD1_CTL_REGEND 0x0008 +#define FD1_CTL_REGEND_REGEND BIT(0) + +/* Channel activation register - Vupdt */ +#define FD1_CTL_CHACT 0x000c +#define FD1_CTL_CHACT_SMW BIT(9) +#define FD1_CTL_CHACT_WR BIT(8) +#define FD1_CTL_CHACT_SMR BIT(3) +#define FD1_CTL_CHACT_RD2 BIT(2) +#define FD1_CTL_CHACT_RD1 BIT(1) +#define FD1_CTL_CHACT_RD0 BIT(0) + +/* Operation Mode Register - Vupdt */ +#define FD1_CTL_OPMODE 0x0010 +#define FD1_CTL_OPMODE_PRG BIT(4) +#define FD1_CTL_OPMODE_VIMD_INTERRUPT (0 << 0) +#define FD1_CTL_OPMODE_VIMD_BESTEFFORT (1 << 0) +#define FD1_CTL_OPMODE_VIMD_NOINTERRUPT (2 << 0) + +#define FD1_CTL_VPERIOD 0x0014 +#define FD1_CTL_CLKCTRL 0x0018 +#define FD1_CTL_CLKCTRL_CSTP_N BIT(0) + +/* Software reset register */ +#define FD1_CTL_SRESET 0x001c +#define FD1_CTL_SRESET_SRST BIT(0) + +/* Control status register (V-update-status) */ +#define FD1_CTL_STATUS 0x0024 +#define FD1_CTL_STATUS_VINT_CNT_MASK GENMASK(31, 16) +#define FD1_CTL_STATUS_VINT_CNT_SHIFT 16 +#define FD1_CTL_STATUS_SGREGSET BIT(10) +#define FD1_CTL_STATUS_SGVERR BIT(9) +#define FD1_CTL_STATUS_SGFREND BIT(8) +#define FD1_CTL_STATUS_BSY BIT(0) + +#define FD1_CTL_VCYCLE_STAT 0x0028 + +/* Interrupt enable register */ +#define FD1_CTL_IRQENB 0x0038 +/* Interrupt status register */ +#define FD1_CTL_IRQSTA 0x003c +/* Interrupt control register */ +#define FD1_CTL_IRQFSET 0x0040 + +/* Common IRQ Bit settings */ +#define FD1_CTL_IRQ_VERE BIT(16) +#define FD1_CTL_IRQ_VINTE BIT(4) +#define FD1_CTL_IRQ_FREE BIT(0) +#define FD1_CTL_IRQ_MASK (FD1_CTL_IRQ_VERE | \ + FD1_CTL_IRQ_VINTE | \ + FD1_CTL_IRQ_FREE) + +/* RPF */ +#define FD1_RPF_SIZE 0x0060 +#define FD1_RPF_SIZE_MASK GENMASK(12, 0) +#define FD1_RPF_SIZE_H_SHIFT 16 +#define FD1_RPF_SIZE_V_SHIFT 0 + +#define FD1_RPF_FORMAT 0x0064 +#define FD1_RPF_FORMAT_CIPM BIT(16) +#define FD1_RPF_FORMAT_RSPYCS BIT(13) +#define FD1_RPF_FORMAT_RSPUVS BIT(12) +#define FD1_RPF_FORMAT_CF BIT(8) + +#define FD1_RPF_PSTRIDE 0x0068 +#define FD1_RPF_PSTRIDE_Y_SHIFT 16 +#define FD1_RPF_PSTRIDE_C_SHIFT 0 + +/* RPF0 Source Component Y Address register */ +#define FD1_RPF0_ADDR_Y 0x006c + +/* RPF1 Current Picture Registers */ +#define FD1_RPF1_ADDR_Y 0x0078 +#define FD1_RPF1_ADDR_C0 0x007c +#define FD1_RPF1_ADDR_C1 0x0080 + +/* RPF2 next picture register */ +#define FD1_RPF2_ADDR_Y 0x0084 + +#define FD1_RPF_SMSK_ADDR 0x0090 +#define FD1_RPF_SWAP 0x0094 + +/* WPF */ +#define FD1_WPF_FORMAT 0x00c0 +#define FD1_WPF_FORMAT_PDV_SHIFT 24 +#define FD1_WPF_FORMAT_FCNL BIT(20) +#define FD1_WPF_FORMAT_WSPYCS BIT(15) +#define FD1_WPF_FORMAT_WSPUVS BIT(14) +#define FD1_WPF_FORMAT_WRTM_601_16 (0 << 9) +#define FD1_WPF_FORMAT_WRTM_601_0 (1 << 9) +#define FD1_WPF_FORMAT_WRTM_709_16 (2 << 9) +#define FD1_WPF_FORMAT_CSC BIT(8) + +#define FD1_WPF_RNDCTL 0x00c4 +#define FD1_WPF_RNDCTL_CBRM BIT(28) +#define FD1_WPF_RNDCTL_CLMD_NOCLIP (0 << 12) +#define FD1_WPF_RNDCTL_CLMD_CLIP_16_235 (1 << 12) +#define FD1_WPF_RNDCTL_CLMD_CLIP_1_254 (2 << 12) + +#define FD1_WPF_PSTRIDE 0x00c8 +#define FD1_WPF_PSTRIDE_Y_SHIFT 16 +#define FD1_WPF_PSTRIDE_C_SHIFT 0 + +/* WPF Destination picture */ +#define FD1_WPF_ADDR_Y 0x00cc +#define FD1_WPF_ADDR_C0 0x00d0 +#define FD1_WPF_ADDR_C1 0x00d4 +#define FD1_WPF_SWAP 0x00d8 +#define FD1_WPF_SWAP_OSWAP_SHIFT 0 +#define FD1_WPF_SWAP_SSWAP_SHIFT 4 + +/* WPF/RPF Common */ +#define FD1_RWPF_SWAP_BYTE BIT(0) +#define FD1_RWPF_SWAP_WORD BIT(1) +#define FD1_RWPF_SWAP_LWRD BIT(2) +#define FD1_RWPF_SWAP_LLWD BIT(3) + +/* IPC */ +#define FD1_IPC_MODE 0x0100 +#define FD1_IPC_MODE_DLI BIT(8) +#define FD1_IPC_MODE_DIM_ADAPT2D3D (0 << 0) +#define FD1_IPC_MODE_DIM_FIXED2D (1 << 0) +#define FD1_IPC_MODE_DIM_FIXED3D (2 << 0) +#define FD1_IPC_MODE_DIM_PREVFIELD (3 << 0) +#define FD1_IPC_MODE_DIM_NEXTFIELD (4 << 0) + +#define FD1_IPC_SMSK_THRESH 0x0104 +#define FD1_IPC_SMSK_THRESH_CONST 0x00010002 + +#define FD1_IPC_COMB_DET 0x0108 +#define FD1_IPC_COMB_DET_CONST 0x00200040 + +#define FD1_IPC_MOTDEC 0x010c +#define FD1_IPC_MOTDEC_CONST 0x00008020 + +/* DLI registers */ +#define FD1_IPC_DLI_BLEND 0x0120 +#define FD1_IPC_DLI_BLEND_CONST 0x0080ff02 + +#define FD1_IPC_DLI_HGAIN 0x0124 +#define FD1_IPC_DLI_HGAIN_CONST 0x001000ff + +#define FD1_IPC_DLI_SPRS 0x0128 +#define FD1_IPC_DLI_SPRS_CONST 0x009004ff + +#define FD1_IPC_DLI_ANGLE 0x012c +#define FD1_IPC_DLI_ANGLE_CONST 0x0004080c + +#define FD1_IPC_DLI_ISOPIX0 0x0130 +#define FD1_IPC_DLI_ISOPIX0_CONST 0xff10ff10 + +#define FD1_IPC_DLI_ISOPIX1 0x0134 +#define FD1_IPC_DLI_ISOPIX1_CONST 0x0000ff10 + +/* Sensor registers */ +#define FD1_IPC_SENSOR_TH0 0x0140 +#define FD1_IPC_SENSOR_TH0_CONST 0x20208080 + +#define FD1_IPC_SENSOR_TH1 0x0144 +#define FD1_IPC_SENSOR_TH1_CONST 0 + +#define FD1_IPC_SENSOR_CTL0 0x0170 +#define FD1_IPC_SENSOR_CTL0_CONST 0x00002201 + +#define FD1_IPC_SENSOR_CTL1 0x0174 +#define FD1_IPC_SENSOR_CTL1_CONST 0 + +#define FD1_IPC_SENSOR_CTL2 0x0178 +#define FD1_IPC_SENSOR_CTL2_X_SHIFT 16 +#define FD1_IPC_SENSOR_CTL2_Y_SHIFT 0 + +#define FD1_IPC_SENSOR_CTL3 0x017c +#define FD1_IPC_SENSOR_CTL3_0_SHIFT 16 +#define FD1_IPC_SENSOR_CTL3_1_SHIFT 0 + +/* Line memory pixel number register */ +#define FD1_IPC_LMEM 0x01e0 +#define FD1_IPC_LMEM_LINEAR 1024 +#define FD1_IPC_LMEM_TILE 960 + +/* Internal Data (HW Version) */ +#define FD1_IP_INTDATA 0x0800 +#define FD1_IP_H3 0x02010101 +#define FD1_IP_M3W 0x02010202 + +/* LUTs */ +#define FD1_LUT_DIF_ADJ 0x1000 +#define FD1_LUT_SAD_ADJ 0x1400 +#define FD1_LUT_BLD_GAIN 0x1800 +#define FD1_LUT_DIF_GAIN 0x1c00 +#define FD1_LUT_MDET 0x2000 + +/** + * struct fdp1_fmt - The FDP1 internal format data + * @fourcc: the fourcc code, to match the V4L2 API + * @bpp: bits per pixel per plane + * @num_planes: number of planes + * @hsub: horizontal subsampling factor + * @vsub: vertical subsampling factor + * @fmt: 7-bit format code for the fdp1 hardware + * @swap_yc: the Y and C components are swapped (Y comes before C) + * @swap_uv: the U and V components are swapped (V comes before U) + * @swap: swap register control + * @types: types of queue this format is applicable to + */ +struct fdp1_fmt { + u32 fourcc; + u8 bpp[3]; + u8 num_planes; + u8 hsub; + u8 vsub; + u8 fmt; + bool swap_yc; + bool swap_uv; + u8 swap; + u8 types; +}; + +static const struct fdp1_fmt fdp1_formats[] = { + /* RGB formats are only supported by the Write Pixel Formatter */ + + { V4L2_PIX_FMT_RGB332, { 8, 0, 0 }, 1, 1, 1, 0x00, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XRGB444, { 16, 0, 0 }, 1, 1, 1, 0x01, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XRGB555, { 16, 0, 0 }, 1, 1, 1, 0x04, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_RGB565, { 16, 0, 0 }, 1, 1, 1, 0x06, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ABGR32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XBGR32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ARGB32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XRGB32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_RGB24, { 24, 0, 0 }, 1, 1, 1, 0x15, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_BGR24, { 24, 0, 0 }, 1, 1, 1, 0x18, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ARGB444, { 16, 0, 0 }, 1, 1, 1, 0x19, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ARGB555, { 16, 0, 0 }, 1, 1, 1, 0x1b, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + + /* YUV Formats are supported by Read and Write Pixel Formatters */ + + { V4L2_PIX_FMT_NV16M, { 8, 16, 0 }, 2, 2, 1, 0x41, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_NV61M, { 8, 16, 0 }, 2, 2, 1, 0x41, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_NV12M, { 8, 16, 0 }, 2, 2, 2, 0x42, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_NV21M, { 8, 16, 0 }, 2, 2, 2, 0x42, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_UYVY, { 16, 0, 0 }, 1, 2, 1, 0x47, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_VYUY, { 16, 0, 0 }, 1, 2, 1, 0x47, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUYV, { 16, 0, 0 }, 1, 2, 1, 0x47, true, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVYU, { 16, 0, 0 }, 1, 2, 1, 0x47, true, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUV444M, { 8, 8, 8 }, 3, 1, 1, 0x4a, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVU444M, { 8, 8, 8 }, 3, 1, 1, 0x4a, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUV422M, { 8, 8, 8 }, 3, 2, 1, 0x4b, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVU422M, { 8, 8, 8 }, 3, 2, 1, 0x4b, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUV420M, { 8, 8, 8 }, 3, 2, 2, 0x4c, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVU420M, { 8, 8, 8 }, 3, 2, 2, 0x4c, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, +}; + +static int fdp1_fmt_is_rgb(const struct fdp1_fmt *fmt) +{ + return fmt->fmt <= 0x1b; /* Last RGB code */ +} + +/* + * FDP1 Lookup tables range from 0...255 only + * + * Each table must be less than 256 entries, and all tables + * are padded out to 256 entries by duplicating the last value. + */ +static const u8 fdp1_diff_adj[] = { + 0x00, 0x24, 0x43, 0x5e, 0x76, 0x8c, 0x9e, 0xaf, + 0xbd, 0xc9, 0xd4, 0xdd, 0xe4, 0xea, 0xef, 0xf3, + 0xf6, 0xf9, 0xfb, 0xfc, 0xfd, 0xfe, 0xfe, 0xff, +}; + +static const u8 fdp1_sad_adj[] = { + 0x00, 0x24, 0x43, 0x5e, 0x76, 0x8c, 0x9e, 0xaf, + 0xbd, 0xc9, 0xd4, 0xdd, 0xe4, 0xea, 0xef, 0xf3, + 0xf6, 0xf9, 0xfb, 0xfc, 0xfd, 0xfe, 0xfe, 0xff, +}; + +static const u8 fdp1_bld_gain[] = { + 0x80, +}; + +static const u8 fdp1_dif_gain[] = { + 0x80, +}; + +static const u8 fdp1_mdet[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, + 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, + 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, + 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, + 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, + 0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, + 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, + 0xd8, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, + 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, + 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, + 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, + 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff +}; + +/* Per-queue, driver-specific private data */ +struct fdp1_q_data { + const struct fdp1_fmt *fmt; + struct v4l2_pix_format_mplane format; + + unsigned int vsize; + unsigned int stride_y; + unsigned int stride_c; +}; + +static const struct fdp1_fmt *fdp1_find_format(u32 pixelformat) +{ + const struct fdp1_fmt *fmt; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(fdp1_formats); i++) { + fmt = &fdp1_formats[i]; + if (fmt->fourcc == pixelformat) + return fmt; + } + + return NULL; +} + +enum fdp1_deint_mode { + FDP1_PROGRESSIVE = 0, /* Must be zero when !deinterlacing */ + FDP1_ADAPT2D3D, + FDP1_FIXED2D, + FDP1_FIXED3D, + FDP1_PREVFIELD, + FDP1_NEXTFIELD, +}; + +#define FDP1_DEINT_MODE_USES_NEXT(mode) \ + (mode == FDP1_ADAPT2D3D || \ + mode == FDP1_FIXED3D || \ + mode == FDP1_NEXTFIELD) + +#define FDP1_DEINT_MODE_USES_PREV(mode) \ + (mode == FDP1_ADAPT2D3D || \ + mode == FDP1_FIXED3D || \ + mode == FDP1_PREVFIELD) + +/* + * FDP1 operates on potentially 3 fields, which are tracked + * from the VB buffers using this context structure. + * Will always be a field or a full frame, never two fields. + */ +struct fdp1_field_buffer { + struct vb2_v4l2_buffer *vb; + dma_addr_t addrs[3]; + + /* Should be NONE:TOP:BOTTOM only */ + enum v4l2_field field; + + /* Flag to indicate this is the last field in the vb */ + bool last_field; + + /* Buffer queue lists */ + struct list_head list; +}; + +struct fdp1_buffer { + struct v4l2_m2m_buffer m2m_buf; + struct fdp1_field_buffer fields[2]; + unsigned int num_fields; +}; + +static inline struct fdp1_buffer *to_fdp1_buffer(struct vb2_v4l2_buffer *vb) +{ + return container_of(vb, struct fdp1_buffer, m2m_buf.vb); +} + +struct fdp1_job { + struct fdp1_field_buffer *previous; + struct fdp1_field_buffer *active; + struct fdp1_field_buffer *next; + struct fdp1_field_buffer *dst; + + /* A job can only be on one list at a time */ + struct list_head list; +}; + +struct fdp1_dev { + struct v4l2_device v4l2_dev; + struct video_device vfd; + + struct mutex dev_mutex; + spinlock_t irqlock; + spinlock_t device_process_lock; + + void __iomem *regs; + unsigned int irq; + struct device *dev; + + /* Job Queues */ + struct fdp1_job jobs[FDP1_NUMBER_JOBS]; + struct list_head free_job_list; + struct list_head queued_job_list; + struct list_head hw_job_list; + + unsigned int clk_rate; + + struct rcar_fcp_device *fcp; + struct v4l2_m2m_dev *m2m_dev; +}; + +struct fdp1_ctx { + struct v4l2_fh fh; + struct fdp1_dev *fdp1; + + struct v4l2_ctrl_handler hdl; + unsigned int sequence; + + /* Processed buffers in this transaction */ + u8 num_processed; + + /* Transaction length (i.e. how many buffers per transaction) */ + u32 translen; + + /* Abort requested by m2m */ + int aborting; + + /* Deinterlace processing mode */ + enum fdp1_deint_mode deint_mode; + + /* + * Adaptive 2D/3D mode uses a shared mask + * This is allocated at streamon, if the ADAPT2D3D mode + * is requested + */ + unsigned int smsk_size; + dma_addr_t smsk_addr[2]; + void *smsk_cpu; + + /* Capture pipeline, can specify an alpha value + * for supported formats. 0-255 only + */ + unsigned char alpha; + + /* Source and destination queue data */ + struct fdp1_q_data out_q; /* HW Source */ + struct fdp1_q_data cap_q; /* HW Destination */ + + /* + * Field Queues + * Interlaced fields are used on 3 occasions, and tracked in this list. + * + * V4L2 Buffers are tracked inside the fdp1_buffer + * and released when the last 'field' completes + */ + struct list_head fields_queue; + unsigned int buffers_queued; + + /* + * For de-interlacing we need to track our previous buffer + * while preparing our job lists. + */ + struct fdp1_field_buffer *previous; +}; + +static inline struct fdp1_ctx *fh_to_ctx(struct v4l2_fh *fh) +{ + return container_of(fh, struct fdp1_ctx, fh); +} + +static struct fdp1_q_data *get_q_data(struct fdp1_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return &ctx->out_q; + else + return &ctx->cap_q; +} + +/* + * list_remove_job: Take the first item off the specified job list + * + * Returns: pointer to a job, or NULL if the list is empty. + */ +static struct fdp1_job *list_remove_job(struct fdp1_dev *fdp1, + struct list_head *list) +{ + struct fdp1_job *job; + unsigned long flags; + + spin_lock_irqsave(&fdp1->irqlock, flags); + job = list_first_entry_or_null(list, struct fdp1_job, list); + if (job) + list_del(&job->list); + spin_unlock_irqrestore(&fdp1->irqlock, flags); + + return job; +} + +/* + * list_add_job: Add a job to the specified job list + * + * Returns: void - always succeeds + */ +static void list_add_job(struct fdp1_dev *fdp1, + struct list_head *list, + struct fdp1_job *job) +{ + unsigned long flags; + + spin_lock_irqsave(&fdp1->irqlock, flags); + list_add_tail(&job->list, list); + spin_unlock_irqrestore(&fdp1->irqlock, flags); +} + +static struct fdp1_job *fdp1_job_alloc(struct fdp1_dev *fdp1) +{ + return list_remove_job(fdp1, &fdp1->free_job_list); +} + +static void fdp1_job_free(struct fdp1_dev *fdp1, struct fdp1_job *job) +{ + /* Ensure that all residue from previous jobs is gone */ + memset(job, 0, sizeof(struct fdp1_job)); + + list_add_job(fdp1, &fdp1->free_job_list, job); +} + +static void queue_job(struct fdp1_dev *fdp1, struct fdp1_job *job) +{ + list_add_job(fdp1, &fdp1->queued_job_list, job); +} + +static struct fdp1_job *get_queued_job(struct fdp1_dev *fdp1) +{ + return list_remove_job(fdp1, &fdp1->queued_job_list); +} + +static void queue_hw_job(struct fdp1_dev *fdp1, struct fdp1_job *job) +{ + list_add_job(fdp1, &fdp1->hw_job_list, job); +} + +static struct fdp1_job *get_hw_queued_job(struct fdp1_dev *fdp1) +{ + return list_remove_job(fdp1, &fdp1->hw_job_list); +} + +/* + * Buffer lists handling + */ +static void fdp1_field_complete(struct fdp1_ctx *ctx, + struct fdp1_field_buffer *fbuf) +{ + /* job->previous may be on the first field */ + if (!fbuf) + return; + + if (fbuf->last_field) + v4l2_m2m_buf_done(fbuf->vb, VB2_BUF_STATE_DONE); +} + +static void fdp1_queue_field(struct fdp1_ctx *ctx, + struct fdp1_field_buffer *fbuf) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + list_add_tail(&fbuf->list, &ctx->fields_queue); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + + ctx->buffers_queued++; +} + +static struct fdp1_field_buffer *fdp1_dequeue_field(struct fdp1_ctx *ctx) +{ + struct fdp1_field_buffer *fbuf; + unsigned long flags; + + ctx->buffers_queued--; + + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + fbuf = list_first_entry_or_null(&ctx->fields_queue, + struct fdp1_field_buffer, list); + if (fbuf) + list_del(&fbuf->list); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + + return fbuf; +} + +/* + * Return the next field in the queue - or NULL, + * without removing the item from the list + */ +static struct fdp1_field_buffer *fdp1_peek_queued_field(struct fdp1_ctx *ctx) +{ + struct fdp1_field_buffer *fbuf; + unsigned long flags; + + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + fbuf = list_first_entry_or_null(&ctx->fields_queue, + struct fdp1_field_buffer, list); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + + return fbuf; +} + +static u32 fdp1_read(struct fdp1_dev *fdp1, unsigned int reg) +{ + u32 value = ioread32(fdp1->regs + reg); + + if (debug >= 2) + dprintk(fdp1, "Read 0x%08x from 0x%04x\n", value, reg); + + return value; +} + +static void fdp1_write(struct fdp1_dev *fdp1, u32 val, unsigned int reg) +{ + if (debug >= 2) + dprintk(fdp1, "Write 0x%08x to 0x%04x\n", val, reg); + + iowrite32(val, fdp1->regs + reg); +} + +/* IPC registers are to be programmed with constant values */ +static void fdp1_set_ipc_dli(struct fdp1_ctx *ctx) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + + fdp1_write(fdp1, FD1_IPC_SMSK_THRESH_CONST, FD1_IPC_SMSK_THRESH); + fdp1_write(fdp1, FD1_IPC_COMB_DET_CONST, FD1_IPC_COMB_DET); + fdp1_write(fdp1, FD1_IPC_MOTDEC_CONST, FD1_IPC_MOTDEC); + + fdp1_write(fdp1, FD1_IPC_DLI_BLEND_CONST, FD1_IPC_DLI_BLEND); + fdp1_write(fdp1, FD1_IPC_DLI_HGAIN_CONST, FD1_IPC_DLI_HGAIN); + fdp1_write(fdp1, FD1_IPC_DLI_SPRS_CONST, FD1_IPC_DLI_SPRS); + fdp1_write(fdp1, FD1_IPC_DLI_ANGLE_CONST, FD1_IPC_DLI_ANGLE); + fdp1_write(fdp1, FD1_IPC_DLI_ISOPIX0_CONST, FD1_IPC_DLI_ISOPIX0); + fdp1_write(fdp1, FD1_IPC_DLI_ISOPIX1_CONST, FD1_IPC_DLI_ISOPIX1); +} + + +static void fdp1_set_ipc_sensor(struct fdp1_ctx *ctx) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_q_data *src_q_data = &ctx->out_q; + unsigned int x0, x1; + unsigned int hsize = src_q_data->format.width; + unsigned int vsize = src_q_data->format.height; + + x0 = hsize / 3; + x1 = 2 * hsize / 3; + + fdp1_write(fdp1, FD1_IPC_SENSOR_TH0_CONST, FD1_IPC_SENSOR_TH0); + fdp1_write(fdp1, FD1_IPC_SENSOR_TH1_CONST, FD1_IPC_SENSOR_TH1); + fdp1_write(fdp1, FD1_IPC_SENSOR_CTL0_CONST, FD1_IPC_SENSOR_CTL0); + fdp1_write(fdp1, FD1_IPC_SENSOR_CTL1_CONST, FD1_IPC_SENSOR_CTL1); + + fdp1_write(fdp1, ((hsize - 1) << FD1_IPC_SENSOR_CTL2_X_SHIFT) | + ((vsize - 1) << FD1_IPC_SENSOR_CTL2_Y_SHIFT), + FD1_IPC_SENSOR_CTL2); + + fdp1_write(fdp1, (x0 << FD1_IPC_SENSOR_CTL3_0_SHIFT) | + (x1 << FD1_IPC_SENSOR_CTL3_1_SHIFT), + FD1_IPC_SENSOR_CTL3); +} + +/* + * fdp1_write_lut: Write a padded LUT to the hw + * + * FDP1 uses constant data for de-interlacing processing, + * with large tables. These hardware tables are all 256 bytes + * long, however they often contain repeated data at the end. + * + * The last byte of the table is written to all remaining entries. + */ +static void fdp1_write_lut(struct fdp1_dev *fdp1, const u8 *lut, + unsigned int len, unsigned int base) +{ + unsigned int i; + u8 pad; + + /* Tables larger than the hw are clipped */ + len = min(len, 256u); + + for (i = 0; i < len; i++) + fdp1_write(fdp1, lut[i], base + (i*4)); + + /* Tables are padded with the last entry */ + pad = lut[i-1]; + + for (; i < 256; i++) + fdp1_write(fdp1, pad, base + (i*4)); +} + +static void fdp1_set_lut(struct fdp1_dev *fdp1) +{ + fdp1_write_lut(fdp1, fdp1_diff_adj, ARRAY_SIZE(fdp1_diff_adj), + FD1_LUT_DIF_ADJ); + fdp1_write_lut(fdp1, fdp1_sad_adj, ARRAY_SIZE(fdp1_sad_adj), + FD1_LUT_SAD_ADJ); + fdp1_write_lut(fdp1, fdp1_bld_gain, ARRAY_SIZE(fdp1_bld_gain), + FD1_LUT_BLD_GAIN); + fdp1_write_lut(fdp1, fdp1_dif_gain, ARRAY_SIZE(fdp1_dif_gain), + FD1_LUT_DIF_GAIN); + fdp1_write_lut(fdp1, fdp1_mdet, ARRAY_SIZE(fdp1_mdet), + FD1_LUT_MDET); +} + +static void fdp1_configure_rpf(struct fdp1_ctx *ctx, + struct fdp1_job *job) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + u32 picture_size; + u32 pstride; + u32 format; + u32 smsk_addr; + + struct fdp1_q_data *q_data = &ctx->out_q; + + /* Picture size is common to Source and Destination frames */ + picture_size = (q_data->format.width << FD1_RPF_SIZE_H_SHIFT) + | (q_data->vsize << FD1_RPF_SIZE_V_SHIFT); + + /* Strides */ + pstride = q_data->stride_y << FD1_RPF_PSTRIDE_Y_SHIFT; + if (q_data->format.num_planes > 1) + pstride |= q_data->stride_c << FD1_RPF_PSTRIDE_C_SHIFT; + + /* Format control */ + format = q_data->fmt->fmt; + if (q_data->fmt->swap_yc) + format |= FD1_RPF_FORMAT_RSPYCS; + + if (q_data->fmt->swap_uv) + format |= FD1_RPF_FORMAT_RSPUVS; + + if (job->active->field == V4L2_FIELD_BOTTOM) { + format |= FD1_RPF_FORMAT_CF; /* Set for Bottom field */ + smsk_addr = ctx->smsk_addr[0]; + } else { + smsk_addr = ctx->smsk_addr[1]; + } + + /* Deint mode is non-zero when deinterlacing */ + if (ctx->deint_mode) + format |= FD1_RPF_FORMAT_CIPM; + + fdp1_write(fdp1, format, FD1_RPF_FORMAT); + fdp1_write(fdp1, q_data->fmt->swap, FD1_RPF_SWAP); + fdp1_write(fdp1, picture_size, FD1_RPF_SIZE); + fdp1_write(fdp1, pstride, FD1_RPF_PSTRIDE); + fdp1_write(fdp1, smsk_addr, FD1_RPF_SMSK_ADDR); + + /* Previous Field Channel (CH0) */ + if (job->previous) + fdp1_write(fdp1, job->previous->addrs[0], FD1_RPF0_ADDR_Y); + + /* Current Field Channel (CH1) */ + fdp1_write(fdp1, job->active->addrs[0], FD1_RPF1_ADDR_Y); + fdp1_write(fdp1, job->active->addrs[1], FD1_RPF1_ADDR_C0); + fdp1_write(fdp1, job->active->addrs[2], FD1_RPF1_ADDR_C1); + + /* Next Field Channel (CH2) */ + if (job->next) + fdp1_write(fdp1, job->next->addrs[0], FD1_RPF2_ADDR_Y); +} + +static void fdp1_configure_wpf(struct fdp1_ctx *ctx, + struct fdp1_job *job) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_q_data *src_q_data = &ctx->out_q; + struct fdp1_q_data *q_data = &ctx->cap_q; + u32 pstride; + u32 format; + u32 swap; + u32 rndctl; + + pstride = q_data->format.plane_fmt[0].bytesperline + << FD1_WPF_PSTRIDE_Y_SHIFT; + + if (q_data->format.num_planes > 1) + pstride |= q_data->format.plane_fmt[1].bytesperline + << FD1_WPF_PSTRIDE_C_SHIFT; + + format = q_data->fmt->fmt; /* Output Format Code */ + + if (q_data->fmt->swap_yc) + format |= FD1_WPF_FORMAT_WSPYCS; + + if (q_data->fmt->swap_uv) + format |= FD1_WPF_FORMAT_WSPUVS; + + if (fdp1_fmt_is_rgb(q_data->fmt)) { + /* Enable Colour Space conversion */ + format |= FD1_WPF_FORMAT_CSC; + + /* Set WRTM */ + if (src_q_data->format.ycbcr_enc == V4L2_YCBCR_ENC_709) + format |= FD1_WPF_FORMAT_WRTM_709_16; + else if (src_q_data->format.quantization == + V4L2_QUANTIZATION_FULL_RANGE) + format |= FD1_WPF_FORMAT_WRTM_601_0; + else + format |= FD1_WPF_FORMAT_WRTM_601_16; + } + + /* Set an alpha value into the Pad Value */ + format |= ctx->alpha << FD1_WPF_FORMAT_PDV_SHIFT; + + /* Determine picture rounding and clipping */ + rndctl = FD1_WPF_RNDCTL_CBRM; /* Rounding Off */ + rndctl |= FD1_WPF_RNDCTL_CLMD_NOCLIP; + + /* WPF Swap needs both ISWAP and OSWAP setting */ + swap = q_data->fmt->swap << FD1_WPF_SWAP_OSWAP_SHIFT; + swap |= src_q_data->fmt->swap << FD1_WPF_SWAP_SSWAP_SHIFT; + + fdp1_write(fdp1, format, FD1_WPF_FORMAT); + fdp1_write(fdp1, rndctl, FD1_WPF_RNDCTL); + fdp1_write(fdp1, swap, FD1_WPF_SWAP); + fdp1_write(fdp1, pstride, FD1_WPF_PSTRIDE); + + fdp1_write(fdp1, job->dst->addrs[0], FD1_WPF_ADDR_Y); + fdp1_write(fdp1, job->dst->addrs[1], FD1_WPF_ADDR_C0); + fdp1_write(fdp1, job->dst->addrs[2], FD1_WPF_ADDR_C1); +} + +static void fdp1_configure_deint_mode(struct fdp1_ctx *ctx, + struct fdp1_job *job) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + u32 opmode = FD1_CTL_OPMODE_VIMD_NOINTERRUPT; + u32 ipcmode = FD1_IPC_MODE_DLI; /* Always set */ + u32 channels = FD1_CTL_CHACT_WR | FD1_CTL_CHACT_RD1; /* Always on */ + + /* De-interlacing Mode */ + switch (ctx->deint_mode) { + default: + case FDP1_PROGRESSIVE: + dprintk(fdp1, "Progressive Mode\n"); + opmode |= FD1_CTL_OPMODE_PRG; + ipcmode |= FD1_IPC_MODE_DIM_FIXED2D; + break; + case FDP1_ADAPT2D3D: + dprintk(fdp1, "Adapt2D3D Mode\n"); + if (ctx->sequence == 0 || ctx->aborting) + ipcmode |= FD1_IPC_MODE_DIM_FIXED2D; + else + ipcmode |= FD1_IPC_MODE_DIM_ADAPT2D3D; + + if (ctx->sequence > 1) { + channels |= FD1_CTL_CHACT_SMW; + channels |= FD1_CTL_CHACT_RD0 | FD1_CTL_CHACT_RD2; + } + + if (ctx->sequence > 2) + channels |= FD1_CTL_CHACT_SMR; + + break; + case FDP1_FIXED3D: + dprintk(fdp1, "Fixed 3D Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_FIXED3D; + /* Except for first and last frame, enable all channels */ + if (!(ctx->sequence == 0 || ctx->aborting)) + channels |= FD1_CTL_CHACT_RD0 | FD1_CTL_CHACT_RD2; + break; + case FDP1_FIXED2D: + dprintk(fdp1, "Fixed 2D Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_FIXED2D; + /* No extra channels enabled */ + break; + case FDP1_PREVFIELD: + dprintk(fdp1, "Previous Field Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_PREVFIELD; + channels |= FD1_CTL_CHACT_RD0; /* Previous */ + break; + case FDP1_NEXTFIELD: + dprintk(fdp1, "Next Field Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_NEXTFIELD; + channels |= FD1_CTL_CHACT_RD2; /* Next */ + break; + } + + fdp1_write(fdp1, channels, FD1_CTL_CHACT); + fdp1_write(fdp1, opmode, FD1_CTL_OPMODE); + fdp1_write(fdp1, ipcmode, FD1_IPC_MODE); +} + +/* + * fdp1_device_process() - Run the hardware + * + * Configure and start the hardware to generate a single frame + * of output given our input parameters. + */ +static int fdp1_device_process(struct fdp1_ctx *ctx) + +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_job *job; + unsigned long flags; + + spin_lock_irqsave(&fdp1->device_process_lock, flags); + + /* Get a job to process */ + job = get_queued_job(fdp1); + if (!job) { + /* + * VINT can call us to see if we can queue another job. + * If we have no work to do, we simply return. + */ + spin_unlock_irqrestore(&fdp1->device_process_lock, flags); + return 0; + } + + /* First Frame only? ... */ + fdp1_write(fdp1, FD1_CTL_CLKCTRL_CSTP_N, FD1_CTL_CLKCTRL); + + /* Set the mode, and configuration */ + fdp1_configure_deint_mode(ctx, job); + + /* DLI Static Configuration */ + fdp1_set_ipc_dli(ctx); + + /* Sensor Configuration */ + fdp1_set_ipc_sensor(ctx); + + /* Setup the source picture */ + fdp1_configure_rpf(ctx, job); + + /* Setup the destination picture */ + fdp1_configure_wpf(ctx, job); + + /* Line Memory Pixel Number Register for linear access */ + fdp1_write(fdp1, FD1_IPC_LMEM_LINEAR, FD1_IPC_LMEM); + + /* Enable Interrupts */ + fdp1_write(fdp1, FD1_CTL_IRQ_MASK, FD1_CTL_IRQENB); + + /* Finally, the Immediate Registers */ + + /* This job is now in the HW queue */ + queue_hw_job(fdp1, job); + + /* Start the command */ + fdp1_write(fdp1, FD1_CTL_CMD_STRCMD, FD1_CTL_CMD); + + /* Registers will update to HW at next VINT */ + fdp1_write(fdp1, FD1_CTL_REGEND_REGEND, FD1_CTL_REGEND); + + /* Enable VINT Generator */ + fdp1_write(fdp1, FD1_CTL_SGCMD_SGEN, FD1_CTL_SGCMD); + + spin_unlock_irqrestore(&fdp1->device_process_lock, flags); + + return 0; +} + +/* + * mem2mem callbacks + */ + +/** + * job_ready() - check whether an instance is ready to be scheduled to run + */ +static int fdp1_m2m_job_ready(void *priv) +{ + struct fdp1_ctx *ctx = priv; + struct fdp1_q_data *src_q_data = &ctx->out_q; + int srcbufs = 1; + int dstbufs = 1; + + dprintk(ctx->fdp1, "+ Src: %d : Dst: %d\n", + v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx), + v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx)); + + /* One output buffer is required for each field */ + if (V4L2_FIELD_HAS_BOTH(src_q_data->format.field)) + dstbufs = 2; + + if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) < srcbufs + || v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) < dstbufs) { + dprintk(ctx->fdp1, "Not enough buffers available\n"); + return 0; + } + + return 1; +} + +static void fdp1_m2m_job_abort(void *priv) +{ + struct fdp1_ctx *ctx = priv; + + dprintk(ctx->fdp1, "+\n"); + + /* Will cancel the transaction in the next interrupt handler */ + ctx->aborting = 1; + + /* Immediate abort sequence */ + fdp1_write(ctx->fdp1, 0, FD1_CTL_SGCMD); + fdp1_write(ctx->fdp1, FD1_CTL_SRESET_SRST, FD1_CTL_SRESET); +} + +/* + * fdp1_prepare_job: Prepare and queue a new job for a single action of work + * + * Prepare the next field, (or frame in progressive) and an output + * buffer for the hardware to perform a single operation. + */ +static struct fdp1_job *fdp1_prepare_job(struct fdp1_ctx *ctx) +{ + struct vb2_v4l2_buffer *vbuf; + struct fdp1_buffer *fbuf; + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_job *job; + unsigned int buffers_required = 1; + + dprintk(fdp1, "+\n"); + + if (FDP1_DEINT_MODE_USES_NEXT(ctx->deint_mode)) + buffers_required = 2; + + if (ctx->buffers_queued < buffers_required) + return NULL; + + job = fdp1_job_alloc(fdp1); + if (!job) { + dprintk(fdp1, "No free jobs currently available\n"); + return NULL; + } + + job->active = fdp1_dequeue_field(ctx); + if (!job->active) { + /* Buffer check should prevent this ever happening */ + dprintk(fdp1, "No input buffers currently available\n"); + + fdp1_job_free(fdp1, job); + return NULL; + } + + dprintk(fdp1, "+ Buffer en-route...\n"); + + /* Source buffers have been prepared on our buffer_queue + * Prepare our Output buffer + */ + vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + fbuf = to_fdp1_buffer(vbuf); + job->dst = &fbuf->fields[0]; + + job->active->vb->sequence = ctx->sequence; + job->dst->vb->sequence = ctx->sequence; + ctx->sequence++; + + if (FDP1_DEINT_MODE_USES_PREV(ctx->deint_mode)) { + job->previous = ctx->previous; + + /* Active buffer becomes the next job's previous buffer */ + ctx->previous = job->active; + } + + if (FDP1_DEINT_MODE_USES_NEXT(ctx->deint_mode)) { + /* Must be called after 'active' is dequeued */ + job->next = fdp1_peek_queued_field(ctx); + } + + /* Transfer timestamps and flags from src->dst */ + + job->dst->vb->vb2_buf.timestamp = job->active->vb->vb2_buf.timestamp; + + job->dst->vb->flags = job->active->vb->flags & + V4L2_BUF_FLAG_TSTAMP_SRC_MASK; + + /* Ideally, the frame-end function will just 'check' to see + * if there are more jobs instead + */ + ctx->translen++; + + /* Finally, Put this job on the processing queue */ + queue_job(fdp1, job); + + dprintk(fdp1, "Job Queued translen = %d\n", ctx->translen); + + return job; +} + +/* fdp1_m2m_device_run() - prepares and starts the device for an M2M task + * + * A single input buffer is taken and serialised into our fdp1_buffer + * queue. The queue is then processed to create as many jobs as possible + * from our available input. + */ +static void fdp1_m2m_device_run(void *priv) +{ + struct fdp1_ctx *ctx = priv; + struct fdp1_dev *fdp1 = ctx->fdp1; + struct vb2_v4l2_buffer *src_vb; + struct fdp1_buffer *buf; + unsigned int i; + + dprintk(fdp1, "+\n"); + + ctx->translen = 0; + + /* Get our incoming buffer of either one or two fields, or one frame */ + src_vb = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + buf = to_fdp1_buffer(src_vb); + + for (i = 0; i < buf->num_fields; i++) { + struct fdp1_field_buffer *fbuf = &buf->fields[i]; + + fdp1_queue_field(ctx, fbuf); + dprintk(fdp1, "Queued Buffer [%d] last_field:%d\n", + i, fbuf->last_field); + } + + /* Queue as many jobs as our data provides for */ + while (fdp1_prepare_job(ctx)) + ; + + if (ctx->translen == 0) { + dprintk(fdp1, "No jobs were processed. M2M action complete\n"); + v4l2_m2m_job_finish(fdp1->m2m_dev, ctx->fh.m2m_ctx); + return; + } + + /* Kick the job processing action */ + fdp1_device_process(ctx); +} + +/* + * device_frame_end: + * + * Handles the M2M level after a buffer completion event. + */ +static void device_frame_end(struct fdp1_dev *fdp1, + enum vb2_buffer_state state) +{ + struct fdp1_ctx *ctx; + unsigned long flags; + struct fdp1_job *job = get_hw_queued_job(fdp1); + + dprintk(fdp1, "+\n"); + + ctx = v4l2_m2m_get_curr_priv(fdp1->m2m_dev); + + if (ctx == NULL) { + v4l2_err(&fdp1->v4l2_dev, + "Instance released before the end of transaction\n"); + return; + } + + ctx->num_processed++; + + /* + * fdp1_field_complete will call buf_done only when the last vb2_buffer + * reference is complete + */ + if (FDP1_DEINT_MODE_USES_PREV(ctx->deint_mode)) + fdp1_field_complete(ctx, job->previous); + else + fdp1_field_complete(ctx, job->active); + + spin_lock_irqsave(&fdp1->irqlock, flags); + v4l2_m2m_buf_done(job->dst->vb, state); + job->dst = NULL; + spin_unlock_irqrestore(&fdp1->irqlock, flags); + + /* Move this job back to the free job list */ + fdp1_job_free(fdp1, job); + + dprintk(fdp1, "curr_ctx->num_processed %d curr_ctx->translen %d\n", + ctx->num_processed, ctx->translen); + + if (ctx->num_processed == ctx->translen || + ctx->aborting) { + dprintk(ctx->fdp1, "Finishing transaction\n"); + ctx->num_processed = 0; + v4l2_m2m_job_finish(fdp1->m2m_dev, ctx->fh.m2m_ctx); + } else { + /* + * For pipelined performance support, this would + * be called from a VINT handler + */ + fdp1_device_process(ctx); + } +} + +/* + * video ioctls + */ +static int fdp1_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, DRIVER_NAME, sizeof(cap->driver)); + strlcpy(cap->card, DRIVER_NAME, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", DRIVER_NAME); + return 0; +} + +static int fdp1_enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + unsigned int i, num; + + num = 0; + + for (i = 0; i < ARRAY_SIZE(fdp1_formats); ++i) { + if (fdp1_formats[i].types & type) { + if (num == f->index) + break; + ++num; + } + } + + /* Format not found */ + if (i >= ARRAY_SIZE(fdp1_formats)) + return -EINVAL; + + /* Format found */ + f->pixelformat = fdp1_formats[i].fourcc; + + return 0; +} + +static int fdp1_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return fdp1_enum_fmt(f, FDP1_CAPTURE); +} + +static int fdp1_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return fdp1_enum_fmt(f, FDP1_OUTPUT); +} + +static int fdp1_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct fdp1_q_data *q_data; + struct fdp1_ctx *ctx = fh_to_ctx(priv); + + if (!v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type)) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + f->fmt.pix_mp = q_data->format; + + return 0; +} + +static void fdp1_compute_stride(struct v4l2_pix_format_mplane *pix, + const struct fdp1_fmt *fmt) +{ + unsigned int i; + + /* Compute and clamp the stride and image size. */ + for (i = 0; i < min_t(unsigned int, fmt->num_planes, 2U); ++i) { + unsigned int hsub = i > 0 ? fmt->hsub : 1; + unsigned int vsub = i > 0 ? fmt->vsub : 1; + /* From VSP : TODO: Confirm alignment limits for FDP1 */ + unsigned int align = 128; + unsigned int bpl; + + bpl = clamp_t(unsigned int, pix->plane_fmt[i].bytesperline, + pix->width / hsub * fmt->bpp[i] / 8, + round_down(FDP1_MAX_STRIDE, align)); + + pix->plane_fmt[i].bytesperline = round_up(bpl, align); + pix->plane_fmt[i].sizeimage = pix->plane_fmt[i].bytesperline + * pix->height / vsub; + + memset(pix->plane_fmt[i].reserved, 0, + sizeof(pix->plane_fmt[i].reserved)); + } + + if (fmt->num_planes == 3) { + /* The two chroma planes must have the same stride. */ + pix->plane_fmt[2].bytesperline = pix->plane_fmt[1].bytesperline; + pix->plane_fmt[2].sizeimage = pix->plane_fmt[1].sizeimage; + + memset(pix->plane_fmt[2].reserved, 0, + sizeof(pix->plane_fmt[2].reserved)); + } +} + +static void fdp1_try_fmt_output(struct fdp1_ctx *ctx, + const struct fdp1_fmt **fmtinfo, + struct v4l2_pix_format_mplane *pix) +{ + const struct fdp1_fmt *fmt; + unsigned int width; + unsigned int height; + + /* Validate the pixel format to ensure the output queue supports it. */ + fmt = fdp1_find_format(pix->pixelformat); + if (!fmt || !(fmt->types & FDP1_OUTPUT)) + fmt = fdp1_find_format(V4L2_PIX_FMT_YUYV); + + if (fmtinfo) + *fmtinfo = fmt; + + pix->pixelformat = fmt->fourcc; + pix->num_planes = fmt->num_planes; + + /* + * Progressive video and all interlaced field orders are acceptable. + * Default to V4L2_FIELD_INTERLACED. + */ + if (pix->field != V4L2_FIELD_NONE && + pix->field != V4L2_FIELD_ALTERNATE && + !V4L2_FIELD_HAS_BOTH(pix->field)) + pix->field = V4L2_FIELD_INTERLACED; + + /* + * The deinterlacer doesn't care about the colorspace, accept all values + * and default to V4L2_COLORSPACE_SMPTE170M. The YUV to RGB conversion + * at the output of the deinterlacer supports a subset of encodings and + * quantization methods and will only be available when the colorspace + * allows it. + */ + if (pix->colorspace == V4L2_COLORSPACE_DEFAULT) + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + + /* + * Align the width and height for YUV 4:2:2 and 4:2:0 formats and clamp + * them to the supported frame size range. The height boundary are + * related to the full frame, divide them by two when the format passes + * fields in separate buffers. + */ + width = round_down(pix->width, fmt->hsub); + pix->width = clamp(width, FDP1_MIN_W, FDP1_MAX_W); + + height = round_down(pix->height, fmt->vsub); + if (pix->field == V4L2_FIELD_ALTERNATE) + pix->height = clamp(height, FDP1_MIN_H / 2, FDP1_MAX_H / 2); + else + pix->height = clamp(height, FDP1_MIN_H, FDP1_MAX_H); + + fdp1_compute_stride(pix, fmt); +} + +static void fdp1_try_fmt_capture(struct fdp1_ctx *ctx, + const struct fdp1_fmt **fmtinfo, + struct v4l2_pix_format_mplane *pix) +{ + struct fdp1_q_data *src_data = &ctx->out_q; + enum v4l2_colorspace colorspace; + enum v4l2_ycbcr_encoding ycbcr_enc; + enum v4l2_quantization quantization; + const struct fdp1_fmt *fmt; + bool allow_rgb; + + /* + * Validate the pixel format. We can only accept RGB output formats if + * the input encoding and quantization are compatible with the format + * conversions supported by the hardware. The supported combinations are + * + * V4L2_YCBCR_ENC_601 + V4L2_QUANTIZATION_LIM_RANGE + * V4L2_YCBCR_ENC_601 + V4L2_QUANTIZATION_FULL_RANGE + * V4L2_YCBCR_ENC_709 + V4L2_QUANTIZATION_LIM_RANGE + */ + colorspace = src_data->format.colorspace; + + ycbcr_enc = src_data->format.ycbcr_enc; + if (ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT) + ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(colorspace); + + quantization = src_data->format.quantization; + if (quantization == V4L2_QUANTIZATION_DEFAULT) + quantization = V4L2_MAP_QUANTIZATION_DEFAULT(false, colorspace, + ycbcr_enc); + + allow_rgb = ycbcr_enc == V4L2_YCBCR_ENC_601 || + (ycbcr_enc == V4L2_YCBCR_ENC_709 && + quantization == V4L2_QUANTIZATION_LIM_RANGE); + + fmt = fdp1_find_format(pix->pixelformat); + if (!fmt || (!allow_rgb && fdp1_fmt_is_rgb(fmt))) + fmt = fdp1_find_format(V4L2_PIX_FMT_YUYV); + + if (fmtinfo) + *fmtinfo = fmt; + + pix->pixelformat = fmt->fourcc; + pix->num_planes = fmt->num_planes; + pix->field = V4L2_FIELD_NONE; + + /* + * The colorspace on the capture queue is copied from the output queue + * as the hardware can't change the colorspace. It can convert YCbCr to + * RGB though, in which case the encoding and quantization are set to + * default values as anything else wouldn't make sense. + */ + pix->colorspace = src_data->format.colorspace; + pix->xfer_func = src_data->format.xfer_func; + + if (fdp1_fmt_is_rgb(fmt)) { + pix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + pix->quantization = V4L2_QUANTIZATION_DEFAULT; + } else { + pix->ycbcr_enc = src_data->format.ycbcr_enc; + pix->quantization = src_data->format.quantization; + } + + /* + * The frame width is identical to the output queue, and the height is + * either doubled or identical depending on whether the output queue + * field order contains one or two fields per frame. + */ + pix->width = src_data->format.width; + if (src_data->format.field == V4L2_FIELD_ALTERNATE) + pix->height = 2 * src_data->format.height; + else + pix->height = src_data->format.height; + + fdp1_compute_stride(pix, fmt); +} + +static int fdp1_try_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct fdp1_ctx *ctx = fh_to_ctx(priv); + + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + fdp1_try_fmt_output(ctx, NULL, &f->fmt.pix_mp); + else + fdp1_try_fmt_capture(ctx, NULL, &f->fmt.pix_mp); + + dprintk(ctx->fdp1, "Try %s format: %4s (0x%08x) %ux%u field %u\n", + V4L2_TYPE_IS_OUTPUT(f->type) ? "output" : "capture", + (char *)&f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.pixelformat, + f->fmt.pix_mp.width, f->fmt.pix_mp.height, f->fmt.pix_mp.field); + + return 0; +} + +static void fdp1_set_format(struct fdp1_ctx *ctx, + struct v4l2_pix_format_mplane *pix, + enum v4l2_buf_type type) +{ + struct fdp1_q_data *q_data = get_q_data(ctx, type); + const struct fdp1_fmt *fmtinfo; + + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + fdp1_try_fmt_output(ctx, &fmtinfo, pix); + else + fdp1_try_fmt_capture(ctx, &fmtinfo, pix); + + q_data->fmt = fmtinfo; + q_data->format = *pix; + + q_data->vsize = pix->height; + if (pix->field != V4L2_FIELD_NONE) + q_data->vsize /= 2; + + q_data->stride_y = pix->plane_fmt[0].bytesperline; + q_data->stride_c = pix->plane_fmt[1].bytesperline; + + /* Adjust strides for interleaved buffers */ + if (pix->field == V4L2_FIELD_INTERLACED || + pix->field == V4L2_FIELD_INTERLACED_TB || + pix->field == V4L2_FIELD_INTERLACED_BT) { + q_data->stride_y *= 2; + q_data->stride_c *= 2; + } + + /* Propagate the format from the output node to the capture node. */ + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + struct fdp1_q_data *dst_data = &ctx->cap_q; + + /* + * Copy the format, clear the per-plane bytes per line and image + * size, override the field and double the height if needed. + */ + dst_data->format = q_data->format; + memset(dst_data->format.plane_fmt, 0, + sizeof(dst_data->format.plane_fmt)); + + dst_data->format.field = V4L2_FIELD_NONE; + if (pix->field == V4L2_FIELD_ALTERNATE) + dst_data->format.height *= 2; + + fdp1_try_fmt_capture(ctx, &dst_data->fmt, &dst_data->format); + + dst_data->vsize = dst_data->format.height; + dst_data->stride_y = dst_data->format.plane_fmt[0].bytesperline; + dst_data->stride_c = dst_data->format.plane_fmt[1].bytesperline; + } +} + +static int fdp1_s_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct fdp1_ctx *ctx = fh_to_ctx(priv); + struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx; + struct vb2_queue *vq = v4l2_m2m_get_vq(m2m_ctx, f->type); + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->fdp1->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + fdp1_set_format(ctx, &f->fmt.pix_mp, f->type); + + dprintk(ctx->fdp1, "Set %s format: %4s (0x%08x) %ux%u field %u\n", + V4L2_TYPE_IS_OUTPUT(f->type) ? "output" : "capture", + (char *)&f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.pixelformat, + f->fmt.pix_mp.width, f->fmt.pix_mp.height, f->fmt.pix_mp.field); + + return 0; +} + +static int fdp1_g_ctrl(struct v4l2_ctrl *ctrl) +{ + struct fdp1_ctx *ctx = + container_of(ctrl->handler, struct fdp1_ctx, hdl); + struct fdp1_q_data *src_q_data = &ctx->out_q; + + switch (ctrl->id) { + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: + if (V4L2_FIELD_HAS_BOTH(src_q_data->format.field)) + ctrl->val = 2; + else + ctrl->val = 1; + return 0; + } + + return 1; +} + +static int fdp1_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct fdp1_ctx *ctx = + container_of(ctrl->handler, struct fdp1_ctx, hdl); + + switch (ctrl->id) { + case V4L2_CID_ALPHA_COMPONENT: + ctx->alpha = ctrl->val; + break; + + case V4L2_CID_DEINTERLACING_MODE: + ctx->deint_mode = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops fdp1_ctrl_ops = { + .s_ctrl = fdp1_s_ctrl, + .g_volatile_ctrl = fdp1_g_ctrl, +}; + +static const char * const fdp1_ctrl_deint_menu[] = { + "Progressive", + "Adaptive 2D/3D", + "Fixed 2D", + "Fixed 3D", + "Previous field", + "Next field", + NULL +}; + +static const struct v4l2_ioctl_ops fdp1_ioctl_ops = { + .vidioc_querycap = fdp1_vidioc_querycap, + + .vidioc_enum_fmt_vid_cap_mplane = fdp1_enum_fmt_vid_cap, + .vidioc_enum_fmt_vid_out_mplane = fdp1_enum_fmt_vid_out, + .vidioc_g_fmt_vid_cap_mplane = fdp1_g_fmt, + .vidioc_g_fmt_vid_out_mplane = fdp1_g_fmt, + .vidioc_try_fmt_vid_cap_mplane = fdp1_try_fmt, + .vidioc_try_fmt_vid_out_mplane = fdp1_try_fmt, + .vidioc_s_fmt_vid_cap_mplane = fdp1_s_fmt, + .vidioc_s_fmt_vid_out_mplane = fdp1_s_fmt, + + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf, + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, + .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf, + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, + + .vidioc_streamon = v4l2_m2m_ioctl_streamon, + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, + + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* + * Queue operations + */ + +static int fdp1_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], + struct device *alloc_ctxs[]) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(vq); + struct fdp1_q_data *q_data; + unsigned int i; + + q_data = get_q_data(ctx, vq->type); + + if (*nplanes) { + if (*nplanes > FDP1_MAX_PLANES) + return -EINVAL; + + return 0; + } + + *nplanes = q_data->format.num_planes; + + for (i = 0; i < *nplanes; i++) + sizes[i] = q_data->format.plane_fmt[i].sizeimage; + + return 0; +} + +static void fdp1_buf_prepare_field(struct fdp1_q_data *q_data, + struct vb2_v4l2_buffer *vbuf, + unsigned int field_num) +{ + struct fdp1_buffer *buf = to_fdp1_buffer(vbuf); + struct fdp1_field_buffer *fbuf = &buf->fields[field_num]; + unsigned int num_fields; + unsigned int i; + + num_fields = V4L2_FIELD_HAS_BOTH(vbuf->field) ? 2 : 1; + + fbuf->vb = vbuf; + fbuf->last_field = (field_num + 1) == num_fields; + + for (i = 0; i < vbuf->vb2_buf.num_planes; ++i) + fbuf->addrs[i] = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, i); + + switch (vbuf->field) { + case V4L2_FIELD_INTERLACED: + /* + * Interlaced means bottom-top for 60Hz TV standards (NTSC) and + * top-bottom for 50Hz. As TV standards are not applicable to + * the mem-to-mem API, use the height as a heuristic. + */ + fbuf->field = (q_data->format.height < 576) == field_num + ? V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM; + break; + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_SEQ_TB: + fbuf->field = field_num ? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP; + break; + case V4L2_FIELD_INTERLACED_BT: + case V4L2_FIELD_SEQ_BT: + fbuf->field = field_num ? V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM; + break; + default: + fbuf->field = vbuf->field; + break; + } + + /* Buffer is completed */ + if (!field_num) + return; + + /* Adjust buffer addresses for second field */ + switch (vbuf->field) { + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + for (i = 0; i < vbuf->vb2_buf.num_planes; i++) + fbuf->addrs[i] += + (i == 0 ? q_data->stride_y : q_data->stride_c); + break; + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + for (i = 0; i < vbuf->vb2_buf.num_planes; i++) + fbuf->addrs[i] += q_data->vsize * + (i == 0 ? q_data->stride_y : q_data->stride_c); + break; + } +} + +static int fdp1_buf_prepare(struct vb2_buffer *vb) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct fdp1_q_data *q_data = get_q_data(ctx, vb->vb2_queue->type); + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct fdp1_buffer *buf = to_fdp1_buffer(vbuf); + unsigned int i; + + if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { + bool field_valid = true; + + /* Validate the buffer field. */ + switch (q_data->format.field) { + case V4L2_FIELD_NONE: + if (vbuf->field != V4L2_FIELD_NONE) + field_valid = false; + break; + + case V4L2_FIELD_ALTERNATE: + if (vbuf->field != V4L2_FIELD_TOP && + vbuf->field != V4L2_FIELD_BOTTOM) + field_valid = false; + break; + + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + if (vbuf->field != q_data->format.field) + field_valid = false; + break; + } + + if (!field_valid) { + dprintk(ctx->fdp1, + "buffer field %u invalid for format field %u\n", + vbuf->field, q_data->format.field); + return -EINVAL; + } + } else { + vbuf->field = V4L2_FIELD_NONE; + } + + /* Validate the planes sizes. */ + for (i = 0; i < q_data->format.num_planes; i++) { + unsigned long size = q_data->format.plane_fmt[i].sizeimage; + + if (vb2_plane_size(vb, i) < size) { + dprintk(ctx->fdp1, + "data will not fit into plane [%u/%u] (%lu < %lu)\n", + i, q_data->format.num_planes, + vb2_plane_size(vb, i), size); + return -EINVAL; + } + + /* We have known size formats all around */ + vb2_set_plane_payload(vb, i, size); + } + + buf->num_fields = V4L2_FIELD_HAS_BOTH(vbuf->field) ? 2 : 1; + for (i = 0; i < buf->num_fields; ++i) + fdp1_buf_prepare_field(q_data, vbuf, i); + + return 0; +} + +static void fdp1_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct fdp1_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); +} + +static int fdp1_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(q); + struct fdp1_q_data *q_data = get_q_data(ctx, q->type); + + if (V4L2_TYPE_IS_OUTPUT(q->type)) { + /* + * Force our deint_mode when we are progressive, + * ignoring any setting on the device from the user, + * Otherwise, lock in the requested de-interlace mode. + */ + if (q_data->format.field == V4L2_FIELD_NONE) + ctx->deint_mode = FDP1_PROGRESSIVE; + + if (ctx->deint_mode == FDP1_ADAPT2D3D) { + u32 stride; + dma_addr_t smsk_base; + const u32 bpp = 2; /* bytes per pixel */ + + stride = round_up(q_data->format.width, 8); + + ctx->smsk_size = bpp * stride * q_data->vsize; + + ctx->smsk_cpu = dma_alloc_coherent(ctx->fdp1->dev, + ctx->smsk_size, &smsk_base, GFP_KERNEL); + + if (ctx->smsk_cpu == NULL) { + dprintk(ctx->fdp1, "Failed to alloc smsk\n"); + return -ENOMEM; + } + + ctx->smsk_addr[0] = smsk_base; + ctx->smsk_addr[1] = smsk_base + (ctx->smsk_size/2); + } + } + + return 0; +} + +static void fdp1_stop_streaming(struct vb2_queue *q) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(q); + struct vb2_v4l2_buffer *vbuf; + unsigned long flags; + + while (1) { + if (V4L2_TYPE_IS_OUTPUT(q->type)) + vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + else + vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + if (vbuf == NULL) + break; + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + } + + /* Empty Output queues */ + if (V4L2_TYPE_IS_OUTPUT(q->type)) { + /* Empty our internal queues */ + struct fdp1_field_buffer *fbuf; + + /* Free any queued buffers */ + fbuf = fdp1_dequeue_field(ctx); + while (fbuf != NULL) { + fdp1_field_complete(ctx, fbuf); + fbuf = fdp1_dequeue_field(ctx); + } + + /* Free smsk_data */ + if (ctx->smsk_cpu) { + dma_free_coherent(ctx->fdp1->dev, ctx->smsk_size, + ctx->smsk_cpu, ctx->smsk_addr[0]); + ctx->smsk_addr[0] = ctx->smsk_addr[1] = 0; + ctx->smsk_cpu = NULL; + } + + WARN(!list_empty(&ctx->fields_queue), + "Buffer queue not empty"); + } else { + /* Empty Capture queues (Jobs) */ + struct fdp1_job *job; + + job = get_queued_job(ctx->fdp1); + while (job) { + if (FDP1_DEINT_MODE_USES_PREV(ctx->deint_mode)) + fdp1_field_complete(ctx, job->previous); + else + fdp1_field_complete(ctx, job->active); + + v4l2_m2m_buf_done(job->dst->vb, VB2_BUF_STATE_ERROR); + job->dst = NULL; + + job = get_queued_job(ctx->fdp1); + } + + /* Free any held buffer in the ctx */ + fdp1_field_complete(ctx, ctx->previous); + + WARN(!list_empty(&ctx->fdp1->queued_job_list), + "Queued Job List not empty"); + + WARN(!list_empty(&ctx->fdp1->hw_job_list), + "HW Job list not empty"); + } +} + +static struct vb2_ops fdp1_qops = { + .queue_setup = fdp1_queue_setup, + .buf_prepare = fdp1_buf_prepare, + .buf_queue = fdp1_buf_queue, + .start_streaming = fdp1_start_streaming, + .stop_streaming = fdp1_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct fdp1_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct fdp1_buffer); + src_vq->ops = &fdp1_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + src_vq->lock = &ctx->fdp1->dev_mutex; + src_vq->dev = ctx->fdp1->dev; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct fdp1_buffer); + dst_vq->ops = &fdp1_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + dst_vq->lock = &ctx->fdp1->dev_mutex; + dst_vq->dev = ctx->fdp1->dev; + + return vb2_queue_init(dst_vq); +} + +/* + * File operations + */ +static int fdp1_open(struct file *file) +{ + struct fdp1_dev *fdp1 = video_drvdata(file); + struct v4l2_pix_format_mplane format; + struct fdp1_ctx *ctx = NULL; + struct v4l2_ctrl *ctrl; + int ret = 0; + + if (mutex_lock_interruptible(&fdp1->dev_mutex)) + return -ERESTARTSYS; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + ret = -ENOMEM; + goto done; + } + + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + ctx->fdp1 = fdp1; + + /* Initialise Queues */ + INIT_LIST_HEAD(&ctx->fields_queue); + + ctx->translen = 1; + ctx->sequence = 0; + + /* Initialise controls */ + + v4l2_ctrl_handler_init(&ctx->hdl, 3); + v4l2_ctrl_new_std_menu_items(&ctx->hdl, &fdp1_ctrl_ops, + V4L2_CID_DEINTERLACING_MODE, + FDP1_NEXTFIELD, BIT(0), FDP1_FIXED3D, + fdp1_ctrl_deint_menu); + + ctrl = v4l2_ctrl_new_std(&ctx->hdl, &fdp1_ctrl_ops, + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE, 1, 2, 1, 1); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + v4l2_ctrl_new_std(&ctx->hdl, &fdp1_ctrl_ops, + V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 255); + + if (ctx->hdl.error) { + ret = ctx->hdl.error; + v4l2_ctrl_handler_free(&ctx->hdl); + goto done; + } + + ctx->fh.ctrl_handler = &ctx->hdl; + v4l2_ctrl_handler_setup(&ctx->hdl); + + /* Configure default parameters. */ + memset(&format, 0, sizeof(format)); + fdp1_set_format(ctx, &format, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + + ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(fdp1->m2m_dev, ctx, &queue_init); + + if (IS_ERR(ctx->fh.m2m_ctx)) { + ret = PTR_ERR(ctx->fh.m2m_ctx); + + v4l2_ctrl_handler_free(&ctx->hdl); + kfree(ctx); + goto done; + } + + /* Perform any power management required */ + pm_runtime_get_sync(fdp1->dev); + + v4l2_fh_add(&ctx->fh); + + dprintk(fdp1, "Created instance: %p, m2m_ctx: %p\n", + ctx, ctx->fh.m2m_ctx); + +done: + mutex_unlock(&fdp1->dev_mutex); + return ret; +} + +static int fdp1_release(struct file *file) +{ + struct fdp1_dev *fdp1 = video_drvdata(file); + struct fdp1_ctx *ctx = fh_to_ctx(file->private_data); + + dprintk(fdp1, "Releasing instance %p\n", ctx); + + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + v4l2_ctrl_handler_free(&ctx->hdl); + mutex_lock(&fdp1->dev_mutex); + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); + mutex_unlock(&fdp1->dev_mutex); + kfree(ctx); + + pm_runtime_put(fdp1->dev); + + return 0; +} + +static const struct v4l2_file_operations fdp1_fops = { + .owner = THIS_MODULE, + .open = fdp1_open, + .release = fdp1_release, + .poll = v4l2_m2m_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = v4l2_m2m_fop_mmap, +}; + +static const struct video_device fdp1_videodev = { + .name = DRIVER_NAME, + .vfl_dir = VFL_DIR_M2M, + .fops = &fdp1_fops, + .device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING, + .ioctl_ops = &fdp1_ioctl_ops, + .minor = -1, + .release = video_device_release_empty, +}; + +static const struct v4l2_m2m_ops m2m_ops = { + .device_run = fdp1_m2m_device_run, + .job_ready = fdp1_m2m_job_ready, + .job_abort = fdp1_m2m_job_abort, +}; + +static irqreturn_t fdp1_irq_handler(int irq, void *dev_id) +{ + struct fdp1_dev *fdp1 = dev_id; + u32 int_status; + u32 ctl_status; + u32 vint_cnt; + u32 cycles; + + int_status = fdp1_read(fdp1, FD1_CTL_IRQSTA); + cycles = fdp1_read(fdp1, FD1_CTL_VCYCLE_STAT); + ctl_status = fdp1_read(fdp1, FD1_CTL_STATUS); + vint_cnt = (ctl_status & FD1_CTL_STATUS_VINT_CNT_MASK) >> + FD1_CTL_STATUS_VINT_CNT_SHIFT; + + /* Clear interrupts */ + fdp1_write(fdp1, ~(int_status) & FD1_CTL_IRQ_MASK, FD1_CTL_IRQSTA); + + if (debug >= 2) { + dprintk(fdp1, "IRQ: 0x%x %s%s%s\n", int_status, + int_status & FD1_CTL_IRQ_VERE ? "[Error]" : "[!E]", + int_status & FD1_CTL_IRQ_VINTE ? "[VSync]" : "[!V]", + int_status & FD1_CTL_IRQ_FREE ? "[FrameEnd]" : "[!F]"); + + dprintk(fdp1, "CycleStatus = %d (%dms)\n", + cycles, cycles/(fdp1->clk_rate/1000)); + + dprintk(fdp1, + "Control Status = 0x%08x : VINT_CNT = %d %s:%s:%s:%s\n", + ctl_status, vint_cnt, + ctl_status & FD1_CTL_STATUS_SGREGSET ? "RegSet" : "", + ctl_status & FD1_CTL_STATUS_SGVERR ? "Vsync Error" : "", + ctl_status & FD1_CTL_STATUS_SGFREND ? "FrameEnd" : "", + ctl_status & FD1_CTL_STATUS_BSY ? "Busy" : ""); + dprintk(fdp1, "***********************************\n"); + } + + /* Spurious interrupt */ + if (!(FD1_CTL_IRQ_MASK & int_status)) + return IRQ_NONE; + + /* Work completed, release the frame */ + if (FD1_CTL_IRQ_VERE & int_status) + device_frame_end(fdp1, VB2_BUF_STATE_ERROR); + else if (FD1_CTL_IRQ_FREE & int_status) + device_frame_end(fdp1, VB2_BUF_STATE_DONE); + + return IRQ_HANDLED; +} + +static int fdp1_probe(struct platform_device *pdev) +{ + struct fdp1_dev *fdp1; + struct video_device *vfd; + struct device_node *fcp_node; + struct resource *res; + struct clk *clk; + unsigned int i; + + int ret; + int hw_version; + + fdp1 = devm_kzalloc(&pdev->dev, sizeof(*fdp1), GFP_KERNEL); + if (!fdp1) + return -ENOMEM; + + INIT_LIST_HEAD(&fdp1->free_job_list); + INIT_LIST_HEAD(&fdp1->queued_job_list); + INIT_LIST_HEAD(&fdp1->hw_job_list); + + /* Initialise the jobs on the free list */ + for (i = 0; i < ARRAY_SIZE(fdp1->jobs); i++) + list_add(&fdp1->jobs[i].list, &fdp1->free_job_list); + + mutex_init(&fdp1->dev_mutex); + + spin_lock_init(&fdp1->irqlock); + spin_lock_init(&fdp1->device_process_lock); + fdp1->dev = &pdev->dev; + platform_set_drvdata(pdev, fdp1); + + /* Memory-mapped registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + fdp1->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(fdp1->regs)) + return PTR_ERR(fdp1->regs); + + /* Interrupt service routine registration */ + fdp1->irq = ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(&pdev->dev, "cannot find IRQ\n"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, fdp1->irq, fdp1_irq_handler, 0, + dev_name(&pdev->dev), fdp1); + if (ret) { + dev_err(&pdev->dev, "cannot claim IRQ %d\n", fdp1->irq); + return ret; + } + + /* FCP */ + fcp_node = of_parse_phandle(pdev->dev.of_node, "renesas,fcp", 0); + if (fcp_node) { + fdp1->fcp = rcar_fcp_get(fcp_node); + of_node_put(fcp_node); + if (IS_ERR(fdp1->fcp)) { + dev_err(&pdev->dev, "FCP not found (%ld)\n", + PTR_ERR(fdp1->fcp)); + return PTR_ERR(fdp1->fcp); + } + } + + /* Determine our clock rate */ + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + fdp1->clk_rate = clk_get_rate(clk); + clk_put(clk); + + /* V4L2 device registration */ + ret = v4l2_device_register(&pdev->dev, &fdp1->v4l2_dev); + if (ret) { + v4l2_err(&fdp1->v4l2_dev, "Failed to register video device\n"); + return ret; + } + + /* M2M registration */ + fdp1->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(fdp1->m2m_dev)) { + v4l2_err(&fdp1->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(fdp1->m2m_dev); + goto unreg_dev; + } + + /* Video registration */ + fdp1->vfd = fdp1_videodev; + vfd = &fdp1->vfd; + vfd->lock = &fdp1->dev_mutex; + vfd->v4l2_dev = &fdp1->v4l2_dev; + video_set_drvdata(vfd, fdp1); + strlcpy(vfd->name, fdp1_videodev.name, sizeof(vfd->name)); + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&fdp1->v4l2_dev, "Failed to register video device\n"); + goto release_m2m; + } + + v4l2_info(&fdp1->v4l2_dev, + "Device registered as /dev/video%d\n", vfd->num); + + /* Power up the cells to read HW */ + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(fdp1->dev); + + hw_version = fdp1_read(fdp1, FD1_IP_INTDATA); + switch (hw_version) { + case FD1_IP_H3: + dprintk(fdp1, "FDP1 Version R-Car H3\n"); + break; + case FD1_IP_M3W: + dprintk(fdp1, "FDP1 Version R-Car M3-W\n"); + break; + default: + dev_err(fdp1->dev, "FDP1 Unidentifiable (0x%08x)\n", + hw_version); + } + + /* Allow the hw to sleep until an open call puts it to use */ + pm_runtime_put(fdp1->dev); + + return 0; + +release_m2m: + v4l2_m2m_release(fdp1->m2m_dev); + +unreg_dev: + v4l2_device_unregister(&fdp1->v4l2_dev); + + return ret; +} + +static int fdp1_remove(struct platform_device *pdev) +{ + struct fdp1_dev *fdp1 = platform_get_drvdata(pdev); + + v4l2_m2m_release(fdp1->m2m_dev); + video_unregister_device(&fdp1->vfd); + v4l2_device_unregister(&fdp1->v4l2_dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static int fdp1_pm_runtime_suspend(struct device *dev) +{ + struct fdp1_dev *fdp1 = dev_get_drvdata(dev); + + rcar_fcp_disable(fdp1->fcp); + + return 0; +} + +static int fdp1_pm_runtime_resume(struct device *dev) +{ + struct fdp1_dev *fdp1 = dev_get_drvdata(dev); + + /* Program in the static LUTs */ + fdp1_set_lut(fdp1); + + return rcar_fcp_enable(fdp1->fcp); +} + +static const struct dev_pm_ops fdp1_pm_ops = { + SET_RUNTIME_PM_OPS(fdp1_pm_runtime_suspend, + fdp1_pm_runtime_resume, + NULL) +}; + +static const struct of_device_id fdp1_dt_ids[] = { + { .compatible = "renesas,fdp1" }, + { }, +}; +MODULE_DEVICE_TABLE(of, fdp1_dt_ids); + +static struct platform_driver fdp1_pdrv = { + .probe = fdp1_probe, + .remove = fdp1_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = fdp1_dt_ids, + .pm = &fdp1_pm_ops, + }, +}; + +module_platform_driver(fdp1_pdrv); + +MODULE_DESCRIPTION("Renesas R-Car Fine Display Processor Driver"); +MODULE_AUTHOR("Kieran Bingham <kieran@bingham.xyz>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c b/drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c index 0912d0a892e2..a1d823ab0c63 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-hw-exynos4.c @@ -178,20 +178,12 @@ void exynos4_jpeg_set_interrupt(void __iomem *base, unsigned int version) unsigned int exynos4_jpeg_get_int_status(void __iomem *base) { - unsigned int int_status; - - int_status = readl(base + EXYNOS4_INT_STATUS_REG); - - return int_status; + return readl(base + EXYNOS4_INT_STATUS_REG); } unsigned int exynos4_jpeg_get_fifo_status(void __iomem *base) { - unsigned int fifo_status; - - fifo_status = readl(base + EXYNOS4_FIFO_STATUS_REG); - - return fifo_status; + return readl(base + EXYNOS4_FIFO_STATUS_REG); } void exynos4_jpeg_set_huf_table_enable(void __iomem *base, int value) @@ -296,10 +288,7 @@ void exynos4_jpeg_set_encode_hoff_cnt(void __iomem *base, unsigned int fmt) unsigned int exynos4_jpeg_get_stream_size(void __iomem *base) { - unsigned int size; - - size = readl(base + EXYNOS4_BITSTREAM_SIZE_REG); - return size; + return readl(base + EXYNOS4_BITSTREAM_SIZE_REG); } void exynos4_jpeg_set_dec_bitstream_size(void __iomem *base, unsigned int size) diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h index 83e01f3466e9..d2cd35916dc5 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc-v6.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v6.h @@ -386,7 +386,8 @@ ((w) * 144 + 8192 * (h) + 49216 + 1048576) #define S5P_FIMV_SCRATCH_BUF_SIZE_VC1_DEC_V6(w, h) \ (2096 * ((w) + (h) + 1)) -#define S5P_FIMV_SCRATCH_BUF_SIZE_H263_DEC_V6(w, h) ((w) * 400) +#define S5P_FIMV_SCRATCH_BUF_SIZE_H263_DEC_V6(w, h) \ + S5P_FIMV_SCRATCH_BUF_SIZE_MPEG4_DEC_V6(w, h) #define S5P_FIMV_SCRATCH_BUF_SIZE_VP8_DEC_V6(w, h) \ ((w) * 32 + (h) * 128 + (((w) + 1) / 2) * 64 + 2112) #define S5P_FIMV_SCRATCH_BUF_SIZE_H264_ENC_V6(w, h) \ diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v8.h b/drivers/media/platform/s5p-mfc/regs-mfc-v8.h index cc7cbec51b5e..4d1c3750eb5e 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc-v8.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v8.h @@ -90,7 +90,7 @@ #define S5P_FIMV_E_H264_OPTIONS_V8 0xfb54 /* MFCv8 Context buffer sizes */ -#define MFC_CTX_BUF_SIZE_V8 (30 * SZ_1K) /* 30KB */ +#define MFC_CTX_BUF_SIZE_V8 (36 * SZ_1K) /* 36KB */ #define MFC_H264_DEC_CTX_BUF_SIZE_V8 (2 * SZ_1M) /* 2MB */ #define MFC_OTHER_DEC_CTX_BUF_SIZE_V8 (20 * SZ_1K) /* 20KB */ #define MFC_H264_ENC_CTX_BUF_SIZE_V8 (100 * SZ_1K) /* 100KB */ diff --git a/drivers/media/platform/s5p-mfc/regs-mfc.h b/drivers/media/platform/s5p-mfc/regs-mfc.h index 6ccc3f8c122a..57b7e0be0596 100644 --- a/drivers/media/platform/s5p-mfc/regs-mfc.h +++ b/drivers/media/platform/s5p-mfc/regs-mfc.h @@ -393,6 +393,9 @@ #define S5P_FIMV_REG_CLEAR_COUNT 0 /* Error handling defines */ +#define S5P_FIMV_ERR_NO_VALID_SEQ_HDR 67 +#define S5P_FIMV_ERR_INCOMPLETE_FRAME 124 +#define S5P_FIMV_ERR_TIMEOUT 140 #define S5P_FIMV_ERR_WARNINGS_START 145 #define S5P_FIMV_ERR_DEC_MASK 0xFFFF #define S5P_FIMV_ERR_DEC_SHIFT 0 diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 0a5b8f5e011e..320124352e82 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -641,8 +641,11 @@ static irqreturn_t s5p_mfc_irq(int irq, void *priv) case S5P_MFC_R2H_CMD_ERR_RET: /* An error has occurred */ if (ctx->state == MFCINST_RUNNING && - s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) >= - dev->warn_start) + (s5p_mfc_hw_call(dev->mfc_ops, err_dec, err) >= + dev->warn_start || + err == S5P_FIMV_ERR_NO_VALID_SEQ_HDR || + err == S5P_FIMV_ERR_INCOMPLETE_FRAME || + err == S5P_FIMV_ERR_TIMEOUT)) s5p_mfc_handle_frame(ctx, reason, err); else s5p_mfc_handle_error(dev, ctx, reason, err); @@ -926,10 +929,11 @@ static int s5p_mfc_release(struct file *file) mfc_debug_enter(); if (dev) mutex_lock(&dev->mfc_mutex); - s5p_mfc_clock_on(); vb2_queue_release(&ctx->vq_src); vb2_queue_release(&ctx->vq_dst); if (dev) { + s5p_mfc_clock_on(); + /* Mark context as idle */ clear_work_bit_irqsave(ctx); /* @@ -951,9 +955,9 @@ static int s5p_mfc_release(struct file *file) if (s5p_mfc_power_off() < 0) mfc_err("Power off failed\n"); } + mfc_debug(2, "Shutting down clock\n"); + s5p_mfc_clock_off(); } - mfc_debug(2, "Shutting down clock\n"); - s5p_mfc_clock_off(); if (dev) dev->ctx[ctx->num] = NULL; s5p_mfc_dec_ctrls_delete(ctx); @@ -1082,6 +1086,7 @@ static struct device *s5p_mfc_alloc_memdev(struct device *dev, idx); if (ret == 0) return child; + device_del(child); } put_device(child); @@ -1438,6 +1443,7 @@ static struct s5p_mfc_variant mfc_drvdata_v5 = { .buf_size = &buf_size_v5, .buf_align = &mfc_buf_align_v5, .fw_name[0] = "s5p-mfc.fw", + .use_clock_gating = true, }; static struct s5p_mfc_buf_size_v6 mfc_buf_size_v6 = { diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 46b99f28cbd7..c068ee3ece6e 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -199,6 +199,7 @@ struct s5p_mfc_buf { struct s5p_mfc_pm { struct clk *clock; struct clk *clock_gate; + bool use_clock_gating; atomic_t power; struct device *device; }; @@ -235,6 +236,7 @@ struct s5p_mfc_variant { struct s5p_mfc_buf_size *buf_size; struct s5p_mfc_buf_align *buf_align; char *fw_name[MFC_FW_MAX_VERSIONS]; + bool use_clock_gating; }; /** diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index 52081ddc9bf2..cf787eae11b7 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -793,18 +793,17 @@ static int vidioc_g_crop(struct file *file, void *priv, cr->c.top = top; cr->c.width = ctx->img_width - left - right; cr->c.height = ctx->img_height - top - bottom; - mfc_debug(2, "Cropping info [h264]: l=%d t=%d " - "w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top, - cr->c.width, cr->c.height, right, bottom, - ctx->buf_width, ctx->buf_height); + mfc_debug(2, "Cropping info [h264]: l=%d t=%d w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", + left, top, cr->c.width, cr->c.height, right, bottom, + ctx->buf_width, ctx->buf_height); } else { cr->c.left = 0; cr->c.top = 0; cr->c.width = ctx->img_width; cr->c.height = ctx->img_height; - mfc_debug(2, "Cropping info: w=%d h=%d fw=%d " - "fh=%d\n", cr->c.width, cr->c.height, ctx->buf_width, - ctx->buf_height); + mfc_debug(2, "Cropping info: w=%d h=%d fw=%d fh=%d\n", + cr->c.width, cr->c.height, ctx->buf_width, + ctx->buf_height); } return 0; } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c index 1e7250260a9a..99f65a92a6be 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.c @@ -45,13 +45,13 @@ int s5p_mfc_alloc_priv_buf(struct device *dev, dma_addr_t base, b->virt = dma_alloc_coherent(dev, b->size, &b->dma, GFP_KERNEL); if (!b->virt) { - mfc_err("Allocating private buffer failed\n"); + mfc_err("Allocating private buffer of size %zu failed\n", + b->size); return -ENOMEM; } if (b->dma < base) { - mfc_err("Invaling memory configuration!\n"); - mfc_err("Allocated buffer (%pad) is lower than memory base address (%pad)\n", + mfc_err("Invalid memory configuration - buffer (%pad) is below base memory address(%pad)\n", &b->dma, &base); dma_free_coherent(dev, b->size, b->virt, b->dma); return -ENOMEM; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c index 81e1e4ce6c24..f4301d5bbd32 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c @@ -1293,14 +1293,11 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) * First set the output frame buffers */ if (ctx->capture_state != QUEUE_BUFS_MMAPED) { - mfc_err("It seems that not all destionation buffers were " - "mmaped\nMFC requires that all destination are mmaped " - "before starting processing\n"); + mfc_err("It seems that not all destionation buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n"); return -EAGAIN; } if (list_empty(&ctx->src_queue)) { - mfc_err("Header has been deallocated in the middle of" - " initialization\n"); + mfc_err("Header has been deallocated in the middle of initialization\n"); return -EIO; } temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c index 930dc2dddae6..b5806ab7ac31 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c @@ -37,6 +37,7 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) pm = &dev->pm; p_dev = dev; + pm->use_clock_gating = dev->variant->use_clock_gating; pm->clock_gate = clk_get(&dev->plat_dev->dev, MFC_GATE_CLK_NAME); if (IS_ERR(pm->clock_gate)) { mfc_err("Failed to get clock-gating control\n"); @@ -108,6 +109,8 @@ int s5p_mfc_clock_on(void) atomic_inc(&clk_ref); mfc_debug(3, "+ %d\n", atomic_read(&clk_ref)); #endif + if (!pm->use_clock_gating) + return 0; if (!IS_ERR_OR_NULL(pm->clock_gate)) ret = clk_enable(pm->clock_gate); return ret; @@ -119,22 +122,32 @@ void s5p_mfc_clock_off(void) atomic_dec(&clk_ref); mfc_debug(3, "- %d\n", atomic_read(&clk_ref)); #endif + if (!pm->use_clock_gating) + return; if (!IS_ERR_OR_NULL(pm->clock_gate)) clk_disable(pm->clock_gate); } int s5p_mfc_power_on(void) { + int ret = 0; + #ifdef CONFIG_PM - return pm_runtime_get_sync(pm->device); + ret = pm_runtime_get_sync(pm->device); + if (ret) + return ret; #else atomic_set(&pm->power, 1); - return 0; #endif + if (!pm->use_clock_gating && !IS_ERR_OR_NULL(pm->clock_gate)) + ret = clk_enable(pm->clock_gate); + return ret; } int s5p_mfc_power_off(void) { + if (!pm->use_clock_gating && !IS_ERR_OR_NULL(pm->clock_gate)) + clk_disable(pm->clock_gate); #ifdef CONFIG_PM return pm_runtime_put_sync(pm->device); #else diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c index 45f82b5ddd77..823608112d89 100644 --- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c +++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c @@ -1337,6 +1337,7 @@ static int bdisp_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { dev_err(dev, "failed to get IRQ resource\n"); + ret = -EINVAL; goto err_clk; } diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c index 30c148b9d65e..42b123ff2953 100644 --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c @@ -112,8 +112,7 @@ static void channel_swdemux_tsklet(unsigned long data) buf = (u8 *) channel->back_buffer_aligned; dev_dbg(fei->dev, - "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\t" - "rp=0x%lx, wp=0x%lx\n", + "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\trp=0x%lx, wp=0x%lx\n", channel->tsin_id, channel, num_packets, buf, pos, rp, wp); for (n = 0; n < num_packets; n++) { @@ -789,8 +788,7 @@ static int c8sectpfe_probe(struct platform_device *pdev) /* sanity check value */ if (tsin->tsin_id > fei->hw_stats.num_ib) { dev_err(&pdev->dev, - "tsin-num %d specified greater than number\n\t" - "of input block hw in SoC! (%d)", + "tsin-num %d specified greater than number\n\tof input block hw in SoC! (%d)", tsin->tsin_id, fei->hw_stats.num_ib); ret = -EINVAL; goto err_clk_disable; @@ -855,8 +853,7 @@ static int c8sectpfe_probe(struct platform_device *pdev) tsin->demux_mapping = index; dev_dbg(fei->dev, - "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\t" - "serial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n", + "channel=%p n=%d tsin_num=%d, invert-ts-clk=%d\n\tserial-not-parallel=%d pkt-clk-valid=%d dvb-card=%d\n", fei->channel_data[index], index, tsin->tsin_id, tsin->invert_ts_clk, tsin->serial_not_parallel, tsin->async_not_sync, @@ -1045,8 +1042,8 @@ static void load_imem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr, */ dev_dbg(fei->dev, - "Loading IMEM segment %d 0x%08x\n\t" - " (0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num, + "Loading IMEM segment %d 0x%08x\n\t (0x%x bytes) -> 0x%p (0x%x bytes)\n", +seg_num, phdr->p_paddr, phdr->p_filesz, dest, phdr->p_memsz + phdr->p_memsz / 3); @@ -1075,8 +1072,7 @@ static void load_dmem_segment(struct c8sectpfei *fei, Elf32_Phdr *phdr, */ dev_dbg(fei->dev, - "Loading DMEM segment %d 0x%08x\n\t" - "(0x%x bytes) -> 0x%p (0x%x bytes)\n", + "Loading DMEM segment %d 0x%08x\n\t(0x%x bytes) -> 0x%p (0x%x bytes)\n", seg_num, phdr->p_paddr, phdr->p_filesz, dst, phdr->p_memsz); diff --git a/drivers/media/platform/sti/hva/hva-hw.c b/drivers/media/platform/sti/hva/hva-hw.c index d341d4994528..68d625b412b6 100644 --- a/drivers/media/platform/sti/hva/hva-hw.c +++ b/drivers/media/platform/sti/hva/hva-hw.c @@ -245,7 +245,7 @@ static irqreturn_t hva_hw_err_irq_thread(int irq, void *arg) ctx->hw_err = true; } - if (hva->lmi_err_reg) { + if (hva->emi_err_reg) { dev_err(dev, "%s external memory interface error: 0x%08x\n", ctx->name, hva->emi_err_reg); ctx->hw_err = true; @@ -305,16 +305,16 @@ int hva_hw_probe(struct platform_device *pdev, struct hva_dev *hva) /* get memory for registers */ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); hva->regs = devm_ioremap_resource(dev, regs); - if (IS_ERR_OR_NULL(hva->regs)) { + if (IS_ERR(hva->regs)) { dev_err(dev, "%s failed to get regs\n", HVA_PREFIX); return PTR_ERR(hva->regs); } /* get memory for esram */ esram = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (IS_ERR_OR_NULL(esram)) { + if (!esram) { dev_err(dev, "%s failed to get esram\n", HVA_PREFIX); - return PTR_ERR(esram); + return -ENODEV; } hva->esram_addr = esram->start; hva->esram_size = resource_size(esram); diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c index 44323cb5d287..b2d166b2221a 100644 --- a/drivers/media/platform/ti-vpe/cal.c +++ b/drivers/media/platform/ti-vpe/cal.c @@ -483,11 +483,7 @@ static void cal_get_hwinfo(struct cal_dev *dev) static inline int cal_runtime_get(struct cal_dev *dev) { - int r; - - r = pm_runtime_get_sync(&dev->pdev->dev); - - return r; + return pm_runtime_get_sync(&dev->pdev->dev); } static inline void cal_runtime_put(struct cal_dev *dev) diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c index 3e2e3a33e6ed..4aff05915051 100644 --- a/drivers/media/platform/ti-vpe/vpdma.c +++ b/drivers/media/platform/ti-vpe/vpdma.c @@ -466,10 +466,10 @@ static void dump_cfd(struct vpdma_cfd *cfd) pr_debug("word2: payload_addr = 0x%08x\n", cfd->payload_addr); - pr_debug("word3: pkt_type = %d, direct = %d, class = %d, dest = %d, " - "payload_len = %d\n", cfd_get_pkt_type(cfd), - cfd_get_direct(cfd), class, cfd_get_dest(cfd), - cfd_get_payload_len(cfd)); + pr_debug("word3: pkt_type = %d, direct = %d, class = %d, dest = %d, payload_len = %d\n", + cfd_get_pkt_type(cfd), + cfd_get_direct(cfd), class, cfd_get_dest(cfd), + cfd_get_payload_len(cfd)); } /* @@ -574,8 +574,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) pr_debug("%s data transfer descriptor for channel %d\n", dir == DTD_DIR_OUT ? "outbound" : "inbound", chan); - pr_debug("word0: data_type = %d, notify = %d, field = %d, 1D = %d, " - "even_ln_skp = %d, odd_ln_skp = %d, line_stride = %d\n", + pr_debug("word0: data_type = %d, notify = %d, field = %d, 1D = %d, even_ln_skp = %d, odd_ln_skp = %d, line_stride = %d\n", dtd_get_data_type(dtd), dtd_get_notify(dtd), dtd_get_field(dtd), dtd_get_1d(dtd), dtd_get_even_line_skip(dtd), dtd_get_odd_line_skip(dtd), dtd_get_line_stride(dtd)); @@ -586,17 +585,16 @@ static void dump_dtd(struct vpdma_dtd *dtd) pr_debug("word2: start_addr = %pad\n", &dtd->start_addr); - pr_debug("word3: pkt_type = %d, mode = %d, dir = %d, chan = %d, " - "pri = %d, next_chan = %d\n", dtd_get_pkt_type(dtd), - dtd_get_mode(dtd), dir, chan, dtd_get_priority(dtd), - dtd_get_next_chan(dtd)); + pr_debug("word3: pkt_type = %d, mode = %d, dir = %d, chan = %d, pri = %d, next_chan = %d\n", + dtd_get_pkt_type(dtd), + dtd_get_mode(dtd), dir, chan, dtd_get_priority(dtd), + dtd_get_next_chan(dtd)); if (dir == DTD_DIR_IN) pr_debug("word4: frame_width = %d, frame_height = %d\n", dtd_get_frame_width(dtd), dtd_get_frame_height(dtd)); else - pr_debug("word4: desc_write_addr = 0x%08x, write_desc = %d, " - "drp_data = %d, use_desc_reg = %d\n", + pr_debug("word4: desc_write_addr = 0x%08x, write_desc = %d, drp_data = %d, use_desc_reg = %d\n", dtd_get_desc_write_addr(dtd), dtd_get_write_desc(dtd), dtd_get_drop_data(dtd), dtd_get_use_desc(dtd)); diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index 0189f7f7cb03..1cf4a4c1b899 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -1263,8 +1263,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data) } if (irqst0 | irqst1) { - dev_warn(dev->v4l2_dev.dev, "Unexpected interrupt: " - "INT0_STATUS0 = 0x%08x, INT0_STATUS1 = 0x%08x\n", + dev_warn(dev->v4l2_dev.dev, "Unexpected interrupt: INT0_STATUS0 = 0x%08x, INT0_STATUS1 = 0x%08x\n", irqst0, irqst1); } diff --git a/drivers/media/platform/via-camera.c b/drivers/media/platform/via-camera.c index 7ca12deba89c..e16f70a5df1d 100644 --- a/drivers/media/platform/via-camera.c +++ b/drivers/media/platform/via-camera.c @@ -39,15 +39,12 @@ MODULE_LICENSE("GPL"); static bool flip_image; module_param(flip_image, bool, 0444); MODULE_PARM_DESC(flip_image, - "If set, the sensor will be instructed to flip the image " - "vertically."); + "If set, the sensor will be instructed to flip the image vertically."); static bool override_serial; module_param(override_serial, bool, 0444); MODULE_PARM_DESC(override_serial, - "The camera driver will normally refuse to load if " - "the XO 1.5 serial port is enabled. Set this option " - "to force-enable the camera."); + "The camera driver will normally refuse to load if the XO 1.5 serial port is enabled. Set this option to force-enable the camera."); /* * The structure describing our camera. diff --git a/drivers/media/platform/vivid/Kconfig b/drivers/media/platform/vivid/Kconfig index 8e6918c5c87c..db0dd19d227a 100644 --- a/drivers/media/platform/vivid/Kconfig +++ b/drivers/media/platform/vivid/Kconfig @@ -25,7 +25,7 @@ config VIDEO_VIVID config VIDEO_VIVID_CEC bool "Enable CEC emulation support" - depends on VIDEO_VIVID && MEDIA_CEC + depends on VIDEO_VIVID && MEDIA_CEC_SUPPORT ---help--- When selected the vivid module will emulate the optional HDMI CEC feature. diff --git a/drivers/media/platform/vivid/vivid-core.h b/drivers/media/platform/vivid/vivid-core.h index a7daa40d0a49..5cdf95bdc4d1 100644 --- a/drivers/media/platform/vivid/vivid-core.h +++ b/drivers/media/platform/vivid/vivid-core.h @@ -80,7 +80,7 @@ extern unsigned vivid_debug; struct vivid_fmt { u32 fourcc; /* v4l2 format id */ - bool is_yuv; + enum tgp_color_enc color_enc; bool can_do_overlay; u8 vdownsampling[TPG_MAX_PLANES]; u32 alpha_mask; @@ -346,6 +346,7 @@ struct vivid_dev { struct v4l2_dv_timings dv_timings_out; u32 colorspace_out; u32 ycbcr_enc_out; + u32 hsv_enc_out; u32 quantization_out; u32 xfer_func_out; u32 service_set_out; diff --git a/drivers/media/platform/vivid/vivid-ctrls.c b/drivers/media/platform/vivid/vivid-ctrls.c index aceb38d9f7e7..34731f71cc00 100644 --- a/drivers/media/platform/vivid/vivid-ctrls.c +++ b/drivers/media/platform/vivid/vivid-ctrls.c @@ -79,6 +79,7 @@ #define VIVID_CID_MAX_EDID_BLOCKS (VIVID_CID_VIVID_BASE + 40) #define VIVID_CID_PERCENTAGE_FILL (VIVID_CID_VIVID_BASE + 41) #define VIVID_CID_REDUCED_FPS (VIVID_CID_VIVID_BASE + 42) +#define VIVID_CID_HSV_ENC (VIVID_CID_VIVID_BASE + 43) #define VIVID_CID_STD_SIGNAL_MODE (VIVID_CID_VIVID_BASE + 60) #define VIVID_CID_STANDARD (VIVID_CID_VIVID_BASE + 61) @@ -378,6 +379,14 @@ static int vivid_vid_cap_s_ctrl(struct v4l2_ctrl *ctrl) vivid_send_source_change(dev, HDMI); vivid_send_source_change(dev, WEBCAM); break; + case VIVID_CID_HSV_ENC: + tpg_s_hsv_enc(&dev->tpg, ctrl->val ? V4L2_HSV_ENC_256 : + V4L2_HSV_ENC_180); + vivid_send_source_change(dev, TV); + vivid_send_source_change(dev, SVID); + vivid_send_source_change(dev, HDMI); + vivid_send_source_change(dev, WEBCAM); + break; case VIVID_CID_QUANTIZATION: tpg_s_quantization(&dev->tpg, ctrl->val); vivid_send_source_change(dev, TV); @@ -778,6 +787,21 @@ static const struct v4l2_ctrl_config vivid_ctrl_ycbcr_enc = { .qmenu = vivid_ctrl_ycbcr_enc_strings, }; +static const char * const vivid_ctrl_hsv_enc_strings[] = { + "Hue 0-179", + "Hue 0-256", + NULL, +}; + +static const struct v4l2_ctrl_config vivid_ctrl_hsv_enc = { + .ops = &vivid_vid_cap_ctrl_ops, + .id = VIVID_CID_HSV_ENC, + .name = "HSV Encoding", + .type = V4L2_CTRL_TYPE_MENU, + .max = ARRAY_SIZE(vivid_ctrl_hsv_enc_strings) - 2, + .qmenu = vivid_ctrl_hsv_enc_strings, +}; + static const char * const vivid_ctrl_quantization_strings[] = { "Default", "Full Range", @@ -1454,6 +1478,7 @@ int vivid_create_controls(struct vivid_dev *dev, bool show_ccs_cap, &vivid_ctrl_colorspace, NULL); v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_xfer_func, NULL); v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_ycbcr_enc, NULL); + v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_hsv_enc, NULL); v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_quantization, NULL); v4l2_ctrl_new_custom(hdl_vid_cap, &vivid_ctrl_alpha_mode, NULL); } diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c index d5c84ecf2027..c52dd8787794 100644 --- a/drivers/media/platform/vivid/vivid-vid-cap.c +++ b/drivers/media/platform/vivid/vivid-vid-cap.c @@ -510,6 +510,13 @@ static unsigned vivid_ycbcr_enc_cap(struct vivid_dev *dev) return dev->ycbcr_enc_out; } +static unsigned int vivid_hsv_enc_cap(struct vivid_dev *dev) +{ + if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev)) + return tpg_g_hsv_enc(&dev->tpg); + return dev->hsv_enc_out; +} + static unsigned vivid_quantization_cap(struct vivid_dev *dev) { if (!dev->loop_video || vivid_is_webcam(dev) || vivid_is_tv_cap(dev)) @@ -530,7 +537,10 @@ int vivid_g_fmt_vid_cap(struct file *file, void *priv, mp->pixelformat = dev->fmt_cap->fourcc; mp->colorspace = vivid_colorspace_cap(dev); mp->xfer_func = vivid_xfer_func_cap(dev); - mp->ycbcr_enc = vivid_ycbcr_enc_cap(dev); + if (dev->fmt_cap->color_enc == TGP_COLOR_ENC_HSV) + mp->hsv_enc = vivid_hsv_enc_cap(dev); + else + mp->ycbcr_enc = vivid_ycbcr_enc_cap(dev); mp->quantization = vivid_quantization_cap(dev); mp->num_planes = dev->fmt_cap->buffers; for (p = 0; p < mp->num_planes; p++) { @@ -618,7 +628,10 @@ int vivid_try_fmt_vid_cap(struct file *file, void *priv, memset(pfmt[p].reserved, 0, sizeof(pfmt[p].reserved)); } mp->colorspace = vivid_colorspace_cap(dev); - mp->ycbcr_enc = vivid_ycbcr_enc_cap(dev); + if (fmt->color_enc == TGP_COLOR_ENC_HSV) + mp->hsv_enc = vivid_hsv_enc_cap(dev); + else + mp->ycbcr_enc = vivid_ycbcr_enc_cap(dev); mp->xfer_func = vivid_xfer_func_cap(dev); mp->quantization = vivid_quantization_cap(dev); memset(mp->reserved, 0, sizeof(mp->reserved)); diff --git a/drivers/media/platform/vivid/vivid-vid-common.c b/drivers/media/platform/vivid/vivid-vid-common.c index fcda3ae4e6b0..3d003fb913ed 100644 --- a/drivers/media/platform/vivid/vivid-vid-common.c +++ b/drivers/media/platform/vivid/vivid-vid-common.c @@ -48,7 +48,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YUYV, .vdownsampling = { 1 }, .bit_depth = { 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 1, .buffers = 1, .data_offset = { PLANE0_DATA_OFFSET }, @@ -57,7 +57,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_UYVY, .vdownsampling = { 1 }, .bit_depth = { 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 1, .buffers = 1, }, @@ -65,7 +65,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YVYU, .vdownsampling = { 1 }, .bit_depth = { 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 1, .buffers = 1, }, @@ -73,7 +73,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_VYUY, .vdownsampling = { 1 }, .bit_depth = { 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 1, .buffers = 1, }, @@ -81,7 +81,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YUV422P, .vdownsampling = { 1, 1, 1 }, .bit_depth = { 8, 4, 4 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 1, }, @@ -89,7 +89,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YUV420, .vdownsampling = { 1, 2, 2 }, .bit_depth = { 8, 4, 4 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 1, }, @@ -97,7 +97,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YVU420, .vdownsampling = { 1, 2, 2 }, .bit_depth = { 8, 4, 4 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 1, }, @@ -105,7 +105,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV12, .vdownsampling = { 1, 2 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 1, }, @@ -113,7 +113,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV21, .vdownsampling = { 1, 2 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 1, }, @@ -121,7 +121,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV16, .vdownsampling = { 1, 1 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 1, }, @@ -129,7 +129,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV61, .vdownsampling = { 1, 1 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 1, }, @@ -137,7 +137,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV24, .vdownsampling = { 1, 1 }, .bit_depth = { 8, 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 1, }, @@ -145,7 +145,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV42, .vdownsampling = { 1, 1 }, .bit_depth = { 8, 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 1, }, @@ -184,7 +184,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_GREY, .vdownsampling = { 1 }, .bit_depth = { 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_LUMA, .planes = 1, .buffers = 1, }, @@ -192,7 +192,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_Y16, .vdownsampling = { 1 }, .bit_depth = { 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_LUMA, .planes = 1, .buffers = 1, }, @@ -200,7 +200,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_Y16_BE, .vdownsampling = { 1 }, .bit_depth = { 16 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_LUMA, .planes = 1, .buffers = 1, }, @@ -445,6 +445,20 @@ struct vivid_fmt vivid_formats[] = { .planes = 1, .buffers = 1, }, + { + .fourcc = V4L2_PIX_FMT_HSV24, /* HSV 24bits */ + .vdownsampling = { 1 }, + .bit_depth = { 24 }, + .planes = 1, + .buffers = 1, + }, + { + .fourcc = V4L2_PIX_FMT_HSV32, /* HSV 32bits */ + .vdownsampling = { 1 }, + .bit_depth = { 32 }, + .planes = 1, + .buffers = 1, + }, /* Multiplanar formats */ @@ -452,7 +466,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV16M, .vdownsampling = { 1, 1 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 2, .data_offset = { PLANE0_DATA_OFFSET, 0 }, @@ -461,7 +475,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV61M, .vdownsampling = { 1, 1 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 2, .data_offset = { 0, PLANE0_DATA_OFFSET }, @@ -470,7 +484,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YUV420M, .vdownsampling = { 1, 2, 2 }, .bit_depth = { 8, 4, 4 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 3, }, @@ -478,7 +492,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YVU420M, .vdownsampling = { 1, 2, 2 }, .bit_depth = { 8, 4, 4 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 3, }, @@ -486,7 +500,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV12M, .vdownsampling = { 1, 2 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 2, }, @@ -494,7 +508,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_NV21M, .vdownsampling = { 1, 2 }, .bit_depth = { 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 2, .buffers = 2, }, @@ -502,7 +516,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YUV422M, .vdownsampling = { 1, 1, 1 }, .bit_depth = { 8, 4, 4 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 3, }, @@ -510,7 +524,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YVU422M, .vdownsampling = { 1, 1, 1 }, .bit_depth = { 8, 4, 4 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 3, }, @@ -518,7 +532,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YUV444M, .vdownsampling = { 1, 1, 1 }, .bit_depth = { 8, 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 3, }, @@ -526,7 +540,7 @@ struct vivid_fmt vivid_formats[] = { .fourcc = V4L2_PIX_FMT_YVU444M, .vdownsampling = { 1, 1, 1 }, .bit_depth = { 8, 8, 8 }, - .is_yuv = true, + .color_enc = TGP_COLOR_ENC_YCBCR, .planes = 3, .buffers = 3, }, @@ -616,6 +630,7 @@ void fmt_sp2mp(const struct v4l2_format *sp_fmt, struct v4l2_format *mp_fmt) mp->field = pix->field; mp->colorspace = pix->colorspace; mp->xfer_func = pix->xfer_func; + /* Also copies hsv_enc */ mp->ycbcr_enc = pix->ycbcr_enc; mp->quantization = pix->quantization; mp->num_planes = 1; @@ -645,6 +660,7 @@ int fmt_sp2mp_func(struct file *file, void *priv, pix->field = mp->field; pix->colorspace = mp->colorspace; pix->xfer_func = mp->xfer_func; + /* Also copies hsv_enc */ pix->ycbcr_enc = mp->ycbcr_enc; pix->quantization = mp->quantization; pix->sizeimage = ppix->sizeimage; diff --git a/drivers/media/platform/vivid/vivid-vid-out.c b/drivers/media/platform/vivid/vivid-vid-out.c index dd609eea4753..7ba52ee98371 100644 --- a/drivers/media/platform/vivid/vivid-vid-out.c +++ b/drivers/media/platform/vivid/vivid-vid-out.c @@ -256,6 +256,7 @@ void vivid_update_format_out(struct vivid_dev *dev) } dev->xfer_func_out = V4L2_XFER_FUNC_DEFAULT; dev->ycbcr_enc_out = V4L2_YCBCR_ENC_DEFAULT; + dev->hsv_enc_out = V4L2_HSV_ENC_180; dev->quantization_out = V4L2_QUANTIZATION_DEFAULT; dev->compose_out = dev->sink_rect; dev->compose_bounds_out = dev->sink_rect; diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c index 57c713a4e1df..aa237b48ad55 100644 --- a/drivers/media/platform/vsp1/vsp1_drv.c +++ b/drivers/media/platform/vsp1/vsp1_drv.c @@ -770,6 +770,7 @@ static const struct of_device_id vsp1_of_match[] = { { .compatible = "renesas,vsp2" }, { }, }; +MODULE_DEVICE_TABLE(of, vsp1_of_match); static struct platform_driver vsp1_platform_driver = { .probe = vsp1_probe, diff --git a/drivers/media/platform/vsp1/vsp1_pipe.c b/drivers/media/platform/vsp1/vsp1_pipe.c index 756ca4ea7668..280ba0804699 100644 --- a/drivers/media/platform/vsp1/vsp1_pipe.c +++ b/drivers/media/platform/vsp1/vsp1_pipe.c @@ -78,6 +78,14 @@ static const struct vsp1_format_info vsp1_video_formats[] = { VI6_FMT_ARGB_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, 1, { 32, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_HSV24, MEDIA_BUS_FMT_AHSV8888_1X32, + VI6_FMT_RGB_888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 24, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_HSV32, MEDIA_BUS_FMT_AHSV8888_1X32, + VI6_FMT_ARGB_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 32, 0, 0 }, false, false, 1, 1, false }, { V4L2_PIX_FMT_UYVY, MEDIA_BUS_FMT_AYUV8_1X32, VI6_FMT_YUYV_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, diff --git a/drivers/media/platform/vsp1/vsp1_rwpf.c b/drivers/media/platform/vsp1/vsp1_rwpf.c index 66e4d7ea31d6..04104ef28fb5 100644 --- a/drivers/media/platform/vsp1/vsp1_rwpf.c +++ b/drivers/media/platform/vsp1/vsp1_rwpf.c @@ -37,6 +37,7 @@ static int vsp1_rwpf_enum_mbus_code(struct v4l2_subdev *subdev, { static const unsigned int codes[] = { MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AHSV8888_1X32, MEDIA_BUS_FMT_AYUV8_1X32, }; @@ -78,6 +79,7 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev, /* Default to YUV if the requested format is not supported. */ if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 && + fmt->format.code != MEDIA_BUS_FMT_AHSV8888_1X32 && fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32) fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32; diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index d351b9c768d2..41e8b096dab8 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -124,6 +124,11 @@ static int __vsp1_video_try_format(struct vsp1_video *video, pix->pixelformat = info->fourcc; pix->colorspace = V4L2_COLORSPACE_SRGB; pix->field = V4L2_FIELD_NONE; + + if (info->fourcc == V4L2_PIX_FMT_HSV24 || + info->fourcc == V4L2_PIX_FMT_HSV32) + pix->hsv_enc = V4L2_HSV_ENC_256; + memset(pix->reserved, 0, sizeof(pix->reserved)); /* Align the width and height for YUV 4:2:2 and 4:2:0 formats. */ diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index cff1eb144a5c..ca051ccbc3e4 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -67,14 +67,10 @@ module_param(probe, bool, 0444); MODULE_PARM_DESC(probe, "Enable automatic device probing."); module_param(hardmute, bool, 0644); -MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may " - "reduce static noise."); +MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise."); module_param_array(io, int, NULL, 0444); -MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic " - "probing is disabled or fails. The most common I/O ports are: 0x20c " - "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to " - "work for the combined sound/radiocard)."); +MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard)."); module_param_array(radio_nr, int, NULL, 0444); MODULE_PARM_DESC(radio_nr, "Radio device numbers"); diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c index a93f681aa9d6..9ce4b12299b4 100644 --- a/drivers/media/radio/radio-wl1273.c +++ b/drivers/media/radio/radio-wl1273.c @@ -2068,8 +2068,7 @@ static int wl1273_fm_radio_probe(struct platform_device *pdev) goto err_request_irq; } } else { - dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Core WL1273 IRQ" - " not configured"); + dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Core WL1273 IRQ not configured"); r = -EINVAL; goto pdata_err; } diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index ee0470a3196b..9b81969d76b5 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -387,8 +387,8 @@ static int si470x_i2c_probe(struct i2c_client *client, radio->registers[DEVICEID], radio->registers[SI_CHIPID]); if ((radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE) < RADIO_FW_VERSION) { dev_warn(&client->dev, - "This driver is known to work with " - "firmware version %hu,\n", RADIO_FW_VERSION); + "This driver is known to work with firmware version %hu,\n", + RADIO_FW_VERSION); dev_warn(&client->dev, "but the device has firmware version %hu.\n", radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE); @@ -400,8 +400,7 @@ static int si470x_i2c_probe(struct i2c_client *client, dev_warn(&client->dev, "If you have some trouble using this driver,\n"); dev_warn(&client->dev, - "please report to V4L ML at " - "linux-media@vger.kernel.org\n"); + "please report to V4L ML at linux-media@vger.kernel.org\n"); } /* set initial frequency */ diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c index 4b132c29f290..1add136d37a3 100644 --- a/drivers/media/radio/si470x/radio-si470x-usb.c +++ b/drivers/media/radio/si470x/radio-si470x-usb.c @@ -351,8 +351,8 @@ static int si470x_get_scratch_page_versions(struct si470x_device *radio) retval = si470x_get_report(radio, radio->usb_buf, SCRATCH_REPORT_SIZE); if (retval < 0) - dev_warn(&radio->intf->dev, "si470x_get_scratch: " - "si470x_get_report returned %d\n", retval); + dev_warn(&radio->intf->dev, "si470x_get_scratch: si470x_get_report returned %d\n", + retval); else { radio->software_version = radio->usb_buf[1]; radio->hardware_version = radio->usb_buf[2]; @@ -688,8 +688,8 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, radio->registers[DEVICEID], radio->registers[SI_CHIPID]); if ((radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE) < RADIO_FW_VERSION) { dev_warn(&intf->dev, - "This driver is known to work with " - "firmware version %hu,\n", RADIO_FW_VERSION); + "This driver is known to work with firmware version %hu,\n", + RADIO_FW_VERSION); dev_warn(&intf->dev, "but the device has firmware version %hu.\n", radio->registers[SI_CHIPID] & SI_CHIPID_FIRMWARE); @@ -705,8 +705,8 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, radio->software_version, radio->hardware_version); if (radio->hardware_version < RADIO_HW_VERSION) { dev_warn(&intf->dev, - "This driver is known to work with " - "hardware version %hu,\n", RADIO_HW_VERSION); + "This driver is known to work with hardware version %hu,\n", + RADIO_HW_VERSION); dev_warn(&intf->dev, "but the device has hardware version %hu.\n", radio->hardware_version); @@ -718,8 +718,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, dev_warn(&intf->dev, "If you have some trouble using this driver,\n"); dev_warn(&intf->dev, - "please report to V4L ML at " - "linux-media@vger.kernel.org\n"); + "please report to V4L ML at linux-media@vger.kernel.org\n"); } /* set led to connect state */ diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c index 0b04b56571da..bc2a8b5442ae 100644 --- a/drivers/media/radio/si4713/si4713.c +++ b/drivers/media/radio/si4713/si4713.c @@ -716,9 +716,9 @@ static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack, *power = val[5]; *antcap = val[6]; *noise = val[7]; - v4l2_dbg(1, debug, &sdev->sd, "%s: response: %d x 10 kHz " - "(power %d, antcap %d, rnl %d)\n", __func__, - *frequency, *power, *antcap, *noise); + v4l2_dbg(1, debug, &sdev->sd, + "%s: response: %d x 10 kHz (power %d, antcap %d, rnl %d)\n", + __func__, *frequency, *power, *antcap, *noise); } return err; @@ -758,10 +758,9 @@ static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb, v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]); *cbleft = (s8)val[2] - val[3]; - v4l2_dbg(1, debug, &sdev->sd, "%s: response: interrupts" - " 0x%02x cb avail: %d cb used %d fifo avail" - " %d fifo used %d\n", __func__, val[1], - val[2], val[3], val[4], val[5]); + v4l2_dbg(1, debug, &sdev->sd, + "%s: response: interrupts 0x%02x cb avail: %d cb used %d fifo avail %d fifo used %d\n", + __func__, val[1], val[2], val[3], val[4], val[5]); } return err; diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c index 642b89c66bcb..6f254e80ffa6 100644 --- a/drivers/media/radio/wl128x/fmdrv_common.c +++ b/drivers/media/radio/wl128x/fmdrv_common.c @@ -230,10 +230,10 @@ inline void dump_rx_skb_data(struct sk_buff *skb) struct fm_event_msg_hdr *evt_hdr; evt_hdr = (struct fm_event_msg_hdr *)skb->data; - printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x " - "opcode:%02x type:%s dlen:%02x", evt_hdr->hdr, evt_hdr->len, - evt_hdr->status, evt_hdr->num_fm_hci_cmds, evt_hdr->op, - (evt_hdr->rd_wr) ? "RD" : "WR", evt_hdr->dlen); + printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x opcode:%02x type:%s dlen:%02x", + evt_hdr->hdr, evt_hdr->len, + evt_hdr->status, evt_hdr->num_fm_hci_cmds, evt_hdr->op, + (evt_hdr->rd_wr) ? "RD" : "WR", evt_hdr->dlen); len_org = skb->len - FM_EVT_MSG_HDR_SIZE; if (len_org > 0) { @@ -271,9 +271,9 @@ static void recv_tasklet(unsigned long arg) /* Process all packets in the RX queue */ while ((skb = skb_dequeue(&fmdev->rx_q))) { if (skb->len < sizeof(struct fm_event_msg_hdr)) { - fmerr("skb(%p) has only %d bytes, " - "at least need %zu bytes to decode\n", skb, - skb->len, sizeof(struct fm_event_msg_hdr)); + fmerr("skb(%p) has only %d bytes, at least need %zu bytes to decode\n", + skb, + skb->len, sizeof(struct fm_event_msg_hdr)); kfree_skb(skb); continue; } @@ -472,8 +472,7 @@ int fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload, if (!wait_for_completion_timeout(&fmdev->maintask_comp, FM_DRV_TX_TIMEOUT)) { - fmerr("Timeout(%d sec),didn't get reg" - "completion signal from RX tasklet\n", + fmerr("Timeout(%d sec),didn't get regcompletion signal from RX tasklet\n", jiffies_to_msecs(FM_DRV_TX_TIMEOUT) / 1000); return -ETIMEDOUT; } @@ -523,8 +522,7 @@ static inline int check_cmdresp_status(struct fmdev *fmdev, fm_evt_hdr = (void *)(*skb)->data; if (fm_evt_hdr->status != 0) { - fmerr("irq: opcode %x response status is not zero " - "Initiating irq recovery process\n", + fmerr("irq: opcode %x response status is not zero Initiating irq recovery process\n", fm_evt_hdr->op); mod_timer(&fmdev->irq_info.timer, jiffies + FM_DRV_TX_TIMEOUT); @@ -564,8 +562,7 @@ static void int_timeout_handler(unsigned long data) * reset stage index & retry count values */ fmirq->stage = 0; fmirq->retry = 0; - fmerr("Recovery action failed during" - "irq processing, max retry reached\n"); + fmerr("Recovery action failed duringirq processing, max retry reached\n"); return; } fm_irq_call_stage(fmdev, FM_SEND_INTMSK_CMD_IDX); @@ -1516,14 +1513,13 @@ int fmc_prepare(struct fmdev *fmdev) if (!wait_for_completion_timeout(&wait_for_fmdrv_reg_comp, FM_ST_REG_TIMEOUT)) { - fmerr("Timeout(%d sec), didn't get reg " - "completion signal from ST\n", + fmerr("Timeout(%d sec), didn't get reg completion signal from ST\n", jiffies_to_msecs(FM_ST_REG_TIMEOUT) / 1000); return -ETIMEDOUT; } if (fmdev->streg_cbdata != 0) { - fmerr("ST reg comp CB called with error " - "status %d\n", fmdev->streg_cbdata); + fmerr("ST reg comp CB called with error status %d\n", + fmdev->streg_cbdata); return -EAGAIN; } diff --git a/drivers/media/radio/wl128x/fmdrv_rx.c b/drivers/media/radio/wl128x/fmdrv_rx.c index cfaeb2417fbb..e7455f82fadc 100644 --- a/drivers/media/radio/wl128x/fmdrv_rx.c +++ b/drivers/media/radio/wl128x/fmdrv_rx.c @@ -120,8 +120,8 @@ int fm_rx_set_freq(struct fmdev *fmdev, u32 freq) curr_frq_in_khz = (fmdev->rx.region.bot_freq + ((u32)curr_frq * FM_FREQ_MUL)); if (curr_frq_in_khz != freq) { - pr_info("Frequency is set to (%d) but " - "requested freq is (%d)\n", curr_frq_in_khz, freq); + pr_info("Frequency is set to (%d) but requested freq is (%d)\n", + curr_frq_in_khz, freq); } /* Update local cache */ @@ -390,8 +390,8 @@ int fm_rx_set_region(struct fmdev *fmdev, u8 region_to_set) new_frq = fmdev->rx.region.top_freq; if (new_frq) { - fmdbg("Current freq is not within band limit boundary," - "switching to %d KHz\n", new_frq); + fmdbg("Current freq is not within band limit boundary,switching to %d KHz\n", + new_frq); /* Current RX frequency is not in range. So, update it */ ret = fm_rx_set_freq(fmdev, new_frq); } diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c index 9f5b59706741..0884b7dc0e71 100644 --- a/drivers/media/rc/ati_remote.c +++ b/drivers/media/rc/ati_remote.c @@ -527,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb) remote_num = (data[3] >> 4) & 0x0f; if (channel_mask & (1 << (remote_num + 1))) { dbginfo(&ati_remote->interface->dev, - "Masked input from channel 0x%02x: data %02x, " - "mask= 0x%02lx\n", + "Masked input from channel 0x%02x: data %02x, mask= 0x%02lx\n", remote_num, data[2], channel_mask); return; } diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index d1c61cd035f6..bd5512e64aea 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -1210,8 +1210,7 @@ MODULE_PARM_DESC(txsim, MODULE_DEVICE_TABLE(pnp, ene_ids); MODULE_DESCRIPTION - ("Infrared input driver for KB3926B/C/D/E/F " - "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port"); + ("Infrared input driver for KB3926B/C/D/E/F (aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port"); MODULE_AUTHOR("Maxim Levitsky"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c index bd7b3bdb1a88..ecab69ea3d51 100644 --- a/drivers/media/rc/fintek-cir.c +++ b/drivers/media/rc/fintek-cir.c @@ -104,11 +104,7 @@ static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 of /* read val from cir config register */ static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset) { - u8 val; - - val = inb(fintek->cir_addr + offset); - - return val; + return inb(fintek->cir_addr + offset); } /* dump current cir register contents */ diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 86cc70fe2534..0785a24af8fc 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -441,13 +441,11 @@ MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)"); /* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */ static int display_type; module_param(display_type, int, S_IRUGO); -MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, " - "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)"); +MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, 1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)"); static int pad_stabilize = 1; module_param(pad_stabilize, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD " - "presses in arrow key mode. 0=disable, 1=enable (default)."); +MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD presses in arrow key mode. 0=disable, 1=enable (default)."); /* * In certain use cases, mouse mode isn't really helpful, and could actually @@ -455,14 +453,12 @@ MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD " */ static bool nomouse; module_param(nomouse, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is " - "open. 0=don't disable, 1=disable. (default: don't disable)"); +MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is open. 0=don't disable, 1=disable. (default: don't disable)"); /* threshold at which a pad push registers as an arrow key in kbd mode */ static int pad_thresh; module_param(pad_thresh, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an " - "arrow key in kbd mode (default: 28)"); +MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an arrow key in kbd mode (default: 28)"); static void free_imon_context(struct imon_context *ictx) @@ -611,7 +607,7 @@ static int send_packet(struct imon_context *ictx) ictx->tx_urb->actual_length = 0; } - init_completion(&ictx->tx.finished); + reinit_completion(&ictx->tx.finished); ictx->tx.busy = true; smp_rmb(); /* ensure later readers know we're busy */ @@ -785,9 +781,7 @@ static ssize_t show_associate_remote(struct device *d, else strcpy(buf, "closed\n"); - dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for " - "instructions on how to associate your iMON 2.4G DT/LT " - "remote\n"); + dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for instructions on how to associate your iMON 2.4G DT/LT remote\n"); mutex_unlock(&ictx->lock); return strlen(buf); } @@ -1115,8 +1109,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 }; if (*rc_type && !(*rc_type & rc->allowed_protocols)) - dev_warn(dev, "Looks like you're trying to use an IR protocol " - "this device does not support\n"); + dev_warn(dev, "Looks like you're trying to use an IR protocol this device does not support\n"); if (*rc_type & RC_BIT_RC6_MCE) { dev_dbg(dev, "Configuring IR receiver for MCE protocol\n"); @@ -1129,8 +1122,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 *rc_type) /* ir_proto_packet[0] = 0x00; // already the default */ *rc_type = RC_BIT_OTHER; } else { - dev_warn(dev, "Unsupported IR protocol specified, overriding " - "to iMON IR protocol\n"); + dev_warn(dev, "Unsupported IR protocol specified, overriding to iMON IR protocol\n"); if (!pad_stabilize) dev_dbg(dev, "PAD stabilize functionality disabled\n"); /* ir_proto_packet[0] = 0x00; // already the default */ @@ -1593,7 +1585,6 @@ static void imon_incoming_packet(struct imon_context *ictx, struct device *dev = ictx->dev; unsigned long flags; u32 kc; - int i; u64 scancode; int press_type = 0; int msec; @@ -1664,10 +1655,8 @@ static void imon_incoming_packet(struct imon_context *ictx, } if (debug) { - printk(KERN_INFO "intf%d decoded packet: ", intf); - for (i = 0; i < len; ++i) - printk("%02x ", buf[i]); - printk("\n"); + printk(KERN_INFO "intf%d decoded packet: %*ph\n", + intf, len, buf); } press_type = imon_parse_press_type(ictx, buf, ktype); @@ -1722,8 +1711,8 @@ static void imon_incoming_packet(struct imon_context *ictx, not_input_data: if (len != 8) { - dev_warn(dev, "imon %s: invalid incoming packet " - "size (len = %d, intf%d)\n", __func__, len, intf); + dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n", + __func__, len, intf); return; } @@ -1879,8 +1868,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx) allowed_protos = RC_BIT_RC6_MCE; break; default: - dev_info(ictx->dev, "Unknown 0xffdc device, " - "defaulting to VFD and iMON IR"); + dev_info(ictx->dev, "Unknown 0xffdc device, defaulting to VFD and iMON IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; /* We don't know which one it is, allow user to set the * RC6 one from userspace if OTHER wasn't correct. */ @@ -1937,8 +1925,8 @@ static void imon_set_display_type(struct imon_context *ictx) ictx->display_supported = false; else ictx->display_supported = true; - dev_info(ictx->dev, "%s: overriding display type to %d via " - "modparam\n", __func__, display_type); + dev_info(ictx->dev, "%s: overriding display type to %d via modparam\n", + __func__, display_type); } ictx->display_type = configured_display_type; @@ -2159,8 +2147,8 @@ static bool imon_find_endpoints(struct imon_context *ictx, if (!display_ep_found) { tx_control = true; display_ep_found = true; - dev_dbg(ictx->dev, "%s: device uses control endpoint, not " - "interface OUT endpoint\n", __func__); + dev_dbg(ictx->dev, "%s: device uses control endpoint, not interface OUT endpoint\n", + __func__); } /* @@ -2228,6 +2216,8 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf, ictx->tx_urb = tx_urb; ictx->rf_device = false; + init_completion(&ictx->tx.finished); + ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor); ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct); @@ -2369,8 +2359,8 @@ static void imon_init_display(struct imon_context *ictx, /* set up sysfs entry for built-in clock */ ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group); if (ret) - dev_err(ictx->dev, "Could not create display sysfs " - "entries(%d)", ret); + dev_err(ictx->dev, "Could not create display sysfs entries(%d)", + ret); if (ictx->display_type == IMON_DISPLAY_TYPE_LCD) ret = usb_register_dev(intf, &imon_lcd_class); @@ -2378,8 +2368,7 @@ static void imon_init_display(struct imon_context *ictx, ret = usb_register_dev(intf, &imon_vfd_class); if (ret) /* Not a fatal error, so ignore */ - dev_info(ictx->dev, "could not get a minor number for " - "display\n"); + dev_info(ictx->dev, "could not get a minor number for display\n"); } @@ -2459,8 +2448,8 @@ static int imon_probe(struct usb_interface *interface, mutex_unlock(&ictx->lock); } - dev_info(dev, "iMON device (%04x:%04x, intf%d) on " - "usb<%d:%d> initialized\n", vendor, product, ifnum, + dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n", + vendor, product, ifnum, usbdev->bus->busnum, usbdev->devnum); mutex_unlock(&driver_lock); @@ -2504,7 +2493,7 @@ static void imon_disconnect(struct usb_interface *interface) /* Abort ongoing write */ if (ictx->tx.busy) { usb_kill_urb(ictx->tx_urb); - complete_all(&ictx->tx.finished); + complete(&ictx->tx.finished); } if (ifnum == 0) { diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index 0f301903aa6f..367b28bed627 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -55,14 +55,12 @@ MODULE_PARM_DESC(debug, "Enable debugging output"); /* low limit for RX carrier freq, Hz, 0 for no RX demodulation */ static int rx_low_carrier_freq; module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, " - "0 for no RX demodulation"); +MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, 0 for no RX demodulation"); /* high limit for RX carrier freq, Hz, 0 for no RX demodulation */ static int rx_high_carrier_freq; module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, " - "Hz, 0 for no RX demodulation"); +MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, Hz, 0 for no RX demodulation"); /* override tx carrier frequency */ static int tx_carrier_freq; @@ -263,6 +261,8 @@ static void ite_set_carrier_params(struct ite_dev *dev) if (allowance > ITE_RXDCR_MAX) allowance = ITE_RXDCR_MAX; + + use_demodulator = true; } } @@ -1484,8 +1484,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) { model_no = model_number; - ite_pr(KERN_NOTICE, "The model has been fixed by a module " - "parameter."); + ite_pr(KERN_NOTICE, "The model has been fixed by a module parameter."); } ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model); diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 4f8c7effdcee..f813b77c595d 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -604,9 +604,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, break; case MCE_RSP_EQWAKEVERSION: if (!out) - dev_dbg(dev, "Wake version, proto: 0x%02x, " - "payload: 0x%02x, address: 0x%02x, " - "version: 0x%02x", + dev_dbg(dev, "Wake version, proto: 0x%02x, payload: 0x%02x, address: 0x%02x, version: 0x%02x", data1, data2, data3, data4); break; case MCE_RSP_GETPORTSTATUS: diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c index 003fff07ade2..7eb3f4f1ddcd 100644 --- a/drivers/media/rc/meson-ir.c +++ b/drivers/media/rc/meson-ir.c @@ -218,6 +218,7 @@ static const struct of_device_id meson_ir_match[] = { { .compatible = "amlogic,meson-gxbb-ir" }, { }, }; +MODULE_DEVICE_TABLE(of, meson_ir_match); static struct platform_driver meson_ir_driver = { .probe = meson_ir_probe, diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index 04fedaa75612..3df3bd9aab7e 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -1002,40 +1002,40 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) { struct nvt_dev *nvt; struct rc_dev *rdev; - int ret = -ENOMEM; + int ret; nvt = devm_kzalloc(&pdev->dev, sizeof(struct nvt_dev), GFP_KERNEL); if (!nvt) - return ret; + return -ENOMEM; /* input device for IR remote (and tx) */ - rdev = rc_allocate_device(); + rdev = devm_rc_allocate_device(&pdev->dev); if (!rdev) - goto exit_free_dev_rdev; + return -ENOMEM; - ret = -ENODEV; /* activate pnp device */ - if (pnp_activate_dev(pdev) < 0) { + ret = pnp_activate_dev(pdev); + if (ret) { dev_err(&pdev->dev, "Could not activate PNP device!\n"); - goto exit_free_dev_rdev; + return ret; } /* validate pnp resources */ if (!pnp_port_valid(pdev, 0) || pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) { dev_err(&pdev->dev, "IR PNP Port not valid!\n"); - goto exit_free_dev_rdev; + return -EINVAL; } if (!pnp_irq_valid(pdev, 0)) { dev_err(&pdev->dev, "PNP IRQ not valid!\n"); - goto exit_free_dev_rdev; + return -EINVAL; } if (!pnp_port_valid(pdev, 1) || pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) { dev_err(&pdev->dev, "Wake PNP Port not valid!\n"); - goto exit_free_dev_rdev; + return -EINVAL; } nvt->cir_addr = pnp_port_start(pdev, 0); @@ -1056,7 +1056,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) ret = nvt_hw_detect(nvt); if (ret) - goto exit_free_dev_rdev; + return ret; /* Initialize CIR & CIR Wake Logical Devices */ nvt_efm_enable(nvt); @@ -1099,27 +1099,27 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) #endif nvt->rdev = rdev; - ret = rc_register_device(rdev); + ret = devm_rc_register_device(&pdev->dev, rdev); if (ret) - goto exit_free_dev_rdev; + return ret; - ret = -EBUSY; /* now claim resources */ if (!devm_request_region(&pdev->dev, nvt->cir_addr, CIR_IOREG_LENGTH, NVT_DRIVER_NAME)) - goto exit_unregister_device; + return -EBUSY; - if (devm_request_irq(&pdev->dev, nvt->cir_irq, nvt_cir_isr, - IRQF_SHARED, NVT_DRIVER_NAME, (void *)nvt)) - goto exit_unregister_device; + ret = devm_request_irq(&pdev->dev, nvt->cir_irq, nvt_cir_isr, + IRQF_SHARED, NVT_DRIVER_NAME, nvt); + if (ret) + return ret; if (!devm_request_region(&pdev->dev, nvt->cir_wake_addr, CIR_IOREG_LENGTH, NVT_DRIVER_NAME "-wake")) - goto exit_unregister_device; + return -EBUSY; ret = device_create_file(&rdev->dev, &dev_attr_wakeup_data); if (ret) - goto exit_unregister_device; + return ret; device_init_wakeup(&pdev->dev, true); @@ -1130,14 +1130,6 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) } return 0; - -exit_unregister_device: - rc_unregister_device(rdev); - rdev = NULL; -exit_free_dev_rdev: - rc_free_device(rdev); - - return ret; } static void nvt_remove(struct pnp_dev *pdev) @@ -1150,8 +1142,6 @@ static void nvt_remove(struct pnp_dev *pdev) /* enable CIR Wake (for IR power-on) */ nvt_enable_wake(nvt); - - rc_unregister_device(nvt->rdev); } static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state) diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index 205ecc602e34..1c42a9f2f290 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -26,8 +26,7 @@ static LIST_HEAD(ir_raw_client_list); /* Used to handle IR raw handler extensions */ static DEFINE_MUTEX(ir_raw_handler_lock); static LIST_HEAD(ir_raw_handler_list); -static DEFINE_MUTEX(available_protocols_lock); -static u64 available_protocols; +static atomic64_t available_protocols = ATOMIC64_INIT(0); static int ir_raw_event_thread(void *data) { @@ -234,11 +233,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_handle); u64 ir_raw_get_allowed_protocols(void) { - u64 protocols; - mutex_lock(&available_protocols_lock); - protocols = available_protocols; - mutex_unlock(&available_protocols_lock); - return protocols; + return atomic64_read(&available_protocols); } static int change_protocol(struct rc_dev *dev, u64 *rc_type) @@ -331,9 +326,7 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler) if (ir_raw_handler->raw_register) list_for_each_entry(raw, &ir_raw_client_list, list) ir_raw_handler->raw_register(raw->dev); - mutex_lock(&available_protocols_lock); - available_protocols |= ir_raw_handler->protocols; - mutex_unlock(&available_protocols_lock); + atomic64_or(ir_raw_handler->protocols, &available_protocols); mutex_unlock(&ir_raw_handler_lock); return 0; @@ -352,9 +345,7 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler) if (ir_raw_handler->raw_unregister) ir_raw_handler->raw_unregister(raw->dev); } - mutex_lock(&available_protocols_lock); - available_protocols &= ~protocols; - mutex_unlock(&available_protocols_lock); + atomic64_andnot(protocols, &available_protocols); mutex_unlock(&ir_raw_handler_lock); } EXPORT_SYMBOL(ir_raw_handler_unregister); diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index d9c1f2ff7119..5087e76dfb03 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -660,8 +660,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol, dev->last_toggle = toggle; dev->last_keycode = keycode; - IR_dprintk(1, "%s: key down event, " - "key 0x%04x, protocol 0x%04x, scancode 0x%08x\n", + IR_dprintk(1, "%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08x\n", dev->input_name, keycode, protocol, scancode); input_report_key(dev->input_dev, keycode, 1); @@ -1403,6 +1402,34 @@ void rc_free_device(struct rc_dev *dev) } EXPORT_SYMBOL_GPL(rc_free_device); +static void devm_rc_alloc_release(struct device *dev, void *res) +{ + rc_free_device(*(struct rc_dev **)res); +} + +struct rc_dev *devm_rc_allocate_device(struct device *dev) +{ + struct rc_dev **dr, *rc; + + dr = devres_alloc(devm_rc_alloc_release, sizeof(*dr), GFP_KERNEL); + if (!dr) + return NULL; + + rc = rc_allocate_device(); + if (!rc) { + devres_free(dr); + return NULL; + } + + rc->dev.parent = dev; + rc->managed_alloc = true; + *dr = rc; + devres_add(dev, dr); + + return rc; +} +EXPORT_SYMBOL_GPL(devm_rc_allocate_device); + int rc_register_device(struct rc_dev *dev) { static bool raw_init = false; /* raw decoders loaded? */ @@ -1531,6 +1558,33 @@ out_unlock: } EXPORT_SYMBOL_GPL(rc_register_device); +static void devm_rc_release(struct device *dev, void *res) +{ + rc_unregister_device(*(struct rc_dev **)res); +} + +int devm_rc_register_device(struct device *parent, struct rc_dev *dev) +{ + struct rc_dev **dr; + int ret; + + dr = devres_alloc(devm_rc_release, sizeof(*dr), GFP_KERNEL); + if (!dr) + return -ENOMEM; + + ret = rc_register_device(dev); + if (ret) { + devres_free(dr); + return ret; + } + + *dr = dev; + devres_add(parent, dr); + + return 0; +} +EXPORT_SYMBOL_GPL(devm_rc_register_device); + void rc_unregister_device(struct rc_dev *dev) { if (!dev) @@ -1552,7 +1606,8 @@ void rc_unregister_device(struct rc_dev *dev) ida_simple_remove(&rc_ida, dev->minor); - rc_free_device(dev); + if (!dev->managed_alloc) + rc_free_device(dev); } EXPORT_SYMBOL_GPL(rc_unregister_device); diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 05ba47bc0b61..3b0ed1c3f2d8 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -265,8 +265,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) /* Codes 0x20 through 0x2f are IR Firmware Errors */ case 0x20: - pr_cont("Initial signal pulse not long enough " - "to measure carrier frequency\n"); + pr_cont("Initial signal pulse not long enough to measure carrier frequency\n"); break; case 0x21: pr_cont("Not enough length values allocated for signal\n"); @@ -278,18 +277,15 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) pr_cont("Too many signal repeats\n"); break; case 0x28: - pr_cont("Insufficient memory available for IR signal " - "data memory allocation\n"); + pr_cont("Insufficient memory available for IR signal data memory allocation\n"); break; case 0x29: - pr_cont("Insufficient memory available " - "for IrDa signal data memory allocation\n"); + pr_cont("Insufficient memory available for IrDa signal data memory allocation\n"); break; /* Codes 0x30 through 0x3f are USB Firmware Errors */ case 0x30: - pr_cont("Insufficient memory available for bulk " - "transfer structure\n"); + pr_cont("Insufficient memory available for bulk transfer structure\n"); break; /* @@ -301,8 +297,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3, int code) pr_cont("Signal capture has been terminated\n"); break; case 0x41: - pr_cont("Attempt to set/get and unknown signal I/O " - "algorithm parameter\n"); + pr_cont("Attempt to set/get and unknown signal I/O algorithm parameter\n"); break; case 0x42: pr_cont("Signal capture already started\n"); @@ -917,8 +912,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3) goto out; } - snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s " - "Infrared Remote Transceiver (%04x:%04x)", + snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s Infrared Remote Transceiver (%04x:%04x)", prod == USB_RR3IIUSB_PRODUCT_ID ? "-II" : "", le16_to_cpu(rr3->udev->descriptor.idVendor), prod); diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index 4004260a7c69..53f9b0af358a 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -297,8 +297,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz) goto out; } - snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared " - "Receiver (%04x:%04x)", + snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared Receiver (%04x:%04x)", le16_to_cpu(sz->usbdev->descriptor.idVendor), le16_to_cpu(sz->usbdev->descriptor.idProduct)); usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys)); @@ -364,15 +363,15 @@ static int streamzap_probe(struct usb_interface *intf, sz->endpoint = &(iface_host->endpoint[0].desc); if (!usb_endpoint_dir_in(sz->endpoint)) { - dev_err(&intf->dev, "%s: endpoint doesn't match input device " - "02%02x\n", __func__, sz->endpoint->bEndpointAddress); + dev_err(&intf->dev, "%s: endpoint doesn't match input device 02%02x\n", + __func__, sz->endpoint->bEndpointAddress); retval = -ENODEV; goto free_sz; } if (!usb_endpoint_xfer_int(sz->endpoint)) { - dev_err(&intf->dev, "%s: endpoint attributes don't match xfer " - "02%02x\n", __func__, sz->endpoint->bmAttributes); + dev_err(&intf->dev, "%s: endpoint attributes don't match xfer 02%02x\n", + __func__, sz->endpoint->bmAttributes); retval = -ENODEV; goto free_sz; } diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 95ae60e659a1..cdcd6e38b295 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -227,8 +227,7 @@ struct wbcir_data { static enum wbcir_protocol protocol = IR_PROTOCOL_RC6; module_param(protocol, uint, 0444); -MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command " - "(0 = RC5, 1 = NEC, 2 = RC6A, default)"); +MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command (0 = RC5, 1 = NEC, 2 = RC6A, default)"); static bool invert; /* default = 0 */ module_param(invert, bool, 0444); @@ -244,8 +243,7 @@ MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command"); static unsigned int wake_rc6mode = 6; module_param(wake_rc6mode, uint, 0644); -MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command " - "(0 = 0, 6 = 6A, default)"); +MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command (0 = 0, 6 = 6A, default)"); @@ -1050,8 +1048,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) goto exit_free_data; } - dev_dbg(&device->dev, "Found device " - "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n", + dev_dbg(&device->dev, "Found device (w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n", data->wbase, data->ebase, data->sbase, data->irq); data->led.name = "cir::activity"; diff --git a/drivers/media/spi/gs1662.c b/drivers/media/spi/gs1662.c index d76f36233f43..330dcb2b2e44 100644 --- a/drivers/media/spi/gs1662.c +++ b/drivers/media/spi/gs1662.c @@ -453,17 +453,15 @@ static int gs_probe(struct spi_device *spi) static int gs_remove(struct spi_device *spi) { struct v4l2_subdev *sd = spi_get_drvdata(spi); - struct gs *gs = to_gs(sd); v4l2_device_unregister_subdev(sd); - kfree(gs); + return 0; } static struct spi_driver gs_driver = { .driver = { .name = "gs1662", - .owner = THIS_MODULE, }, .probe = gs_probe, diff --git a/drivers/media/tuners/fc0011.c b/drivers/media/tuners/fc0011.c index 3932aa81e18c..2dda8d993c14 100644 --- a/drivers/media/tuners/fc0011.c +++ b/drivers/media/tuners/fc0011.c @@ -262,8 +262,7 @@ static int fc0011_set_params(struct dvb_frontend *fe) regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M; break; default: - dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. " - "Using 6000 kHz.\n", + dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. Using 6000 kHz.\n", bandwidth); bandwidth = 6000; /* fallthrough */ @@ -435,9 +434,7 @@ static int fc0011_set_params(struct dvb_frontend *fe) if (err) return err; - dev_dbg(&priv->i2c->dev, "Tuned to " - "fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X " - "vcocal=%02X(%u) bw=%u\n", + dev_dbg(&priv->i2c->dev, "Tuned to fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X vcocal=%02X(%u) bw=%u\n", (unsigned int)regs[FC11_REG_FA], (unsigned int)regs[FC11_REG_FP], (unsigned int)regs[FC11_REG_XINHI], diff --git a/drivers/media/tuners/mc44s803.c b/drivers/media/tuners/mc44s803.c index f1b764074661..d5681669d3cd 100644 --- a/drivers/media/tuners/mc44s803.c +++ b/drivers/media/tuners/mc44s803.c @@ -349,8 +349,8 @@ struct dvb_frontend *mc44s803_attach(struct dvb_frontend *fe, id = MC44S803_REG_MS(reg, MC44S803_ID); if (id != 0x14) { - mc_printk(KERN_ERR, "unsupported ID " - "(%x should be 0x14)\n", id); + mc_printk(KERN_ERR, "unsupported ID (%x should be 0x14)\n", + id); goto error; } diff --git a/drivers/media/tuners/mt20xx.c b/drivers/media/tuners/mt20xx.c index 52da4671b0e0..29dadd171b31 100644 --- a/drivers/media/tuners/mt20xx.c +++ b/drivers/media/tuners/mt20xx.c @@ -487,13 +487,8 @@ static void mt2050_set_if_freq(struct dvb_frontend *fe,unsigned int freq, unsign buf[5]=div2a; if(num2!=0) buf[5]=buf[5]|0x40; - if (debug > 1) { - int i; - tuner_dbg("bufs is: "); - for(i=0;i<6;i++) - printk("%x ",buf[i]); - printk("\n"); - } + if (debug > 1) + tuner_dbg("bufs is: %*ph\n", 6, buf); ret=tuner_i2c_xfer_send(&priv->i2c_props,buf,6); if (ret!=6) @@ -619,15 +614,9 @@ struct dvb_frontend *microtune_attach(struct dvb_frontend *fe, tuner_i2c_xfer_send(&priv->i2c_props,buf,1); tuner_i2c_xfer_recv(&priv->i2c_props,buf,21); - if (debug) { - int i; - tuner_dbg("MT20xx hexdump:"); - for(i=0;i<21;i++) { - printk(" %02x",buf[i]); - if(((i+1)%8)==0) printk(" "); - } - printk("\n"); - } + if (debug) + tuner_dbg("MT20xx hexdump: %*ph\n", 21, buf); + company_code = buf[0x11] << 8 | buf[0x12]; tuner_info("microtune: companycode=%04x part=%02x rev=%02x\n", company_code,buf[0x13],buf[0x14]); diff --git a/drivers/media/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c index a26bb33102b8..7e81cd887c13 100644 --- a/drivers/media/tuners/tda18271-common.c +++ b/drivers/media/tuners/tda18271-common.c @@ -251,8 +251,8 @@ static int __tda18271_write_regs(struct dvb_frontend *fe, int idx, int len, } if (ret != 1) - tda_err("ERROR: idx = 0x%x, len = %d, " - "i2c_transfer returned: %d\n", idx, max, ret); + tda_err("ERROR: idx = 0x%x, len = %d, i2c_transfer returned: %d\n", + idx, max, ret); return (ret == 1 ? 0 : ret); } diff --git a/drivers/media/tuners/tda18271-fe.c b/drivers/media/tuners/tda18271-fe.c index 2d50e8b1dce1..a4730610c0c6 100644 --- a/drivers/media/tuners/tda18271-fe.c +++ b/drivers/media/tuners/tda18271-fe.c @@ -26,8 +26,7 @@ int tda18271_debug; module_param_named(debug, tda18271_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level " - "(info=1, map=2, reg=4, adv=8, cal=16 (or-able))"); +MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4, adv=8, cal=16 (or-able))"); static int tda18271_cal_on_startup = -1; module_param_named(cal, tda18271_cal_on_startup, int, 0644); diff --git a/drivers/media/tuners/tda18271-maps.c b/drivers/media/tuners/tda18271-maps.c index 1e89dd93c4bb..7d114677b4ca 100644 --- a/drivers/media/tuners/tda18271-maps.c +++ b/drivers/media/tuners/tda18271-maps.c @@ -1024,11 +1024,7 @@ int tda18271_lookup_rf_band(struct dvb_frontend *fe, u32 *freq, u8 *rf_band) while ((map[i].rfmax * 1000) < *freq) { if (tda18271_debug & DBG_ADV) - tda_map("(%d) rfmax = %d < freq = %d, " - "rf1_def = %d, rf2_def = %d, rf3_def = %d, " - "rf1 = %d, rf2 = %d, rf3 = %d, " - "rf_a1 = %d, rf_a2 = %d, " - "rf_b1 = %d, rf_b2 = %d\n", + tda_map("(%d) rfmax = %d < freq = %d, rf1_def = %d, rf2_def = %d, rf3_def = %d, rf1 = %d, rf2 = %d, rf3 = %d, rf_a1 = %d, rf_a2 = %d, rf_b1 = %d, rf_b2 = %d\n", i, map[i].rfmax * 1000, *freq, map[i].rf1_def, map[i].rf2_def, map[i].rf3_def, map[i].rf1, map[i].rf2, map[i].rf3, diff --git a/drivers/media/tuners/tda8290.c b/drivers/media/tuners/tda8290.c index 998e82bba9c0..6b75415b75a5 100644 --- a/drivers/media/tuners/tda8290.c +++ b/drivers/media/tuners/tda8290.c @@ -617,8 +617,8 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) if (tuner_addrs == 0) { tuner_addrs = 0x60; - tuner_info("could not clearly identify tuner address, " - "defaulting to %x\n", tuner_addrs); + tuner_info("could not clearly identify tuner address, defaulting to %x\n", + tuner_addrs); } else { tuner_addrs = tuner_addrs & 0xff; tuner_info("setting tuner address to %x\n", tuner_addrs); diff --git a/drivers/media/tuners/tea5761.c b/drivers/media/tuners/tea5761.c index 36b0b1e1d05b..12347aa95de3 100644 --- a/drivers/media/tuners/tea5761.c +++ b/drivers/media/tuners/tea5761.c @@ -274,13 +274,11 @@ int tea5761_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr) } if ((buffer[13] != 0x2b) || (buffer[14] != 0x57) || (buffer[15] != 0x061)) { - printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x." - " It is not a TEA5761\n", + printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x. It is not a TEA5761\n", buffer[13], buffer[14], buffer[15]); return -EINVAL; } - printk(KERN_WARNING "tea5761: TEA%02x%02x detected. " - "Manufacturer ID= 0x%02x\n", + printk(KERN_WARNING "tea5761: TEA%02x%02x detected. Manufacturer ID= 0x%02x\n", buffer[14], buffer[15], buffer[13]); return 0; diff --git a/drivers/media/tuners/tuner-simple.c b/drivers/media/tuners/tuner-simple.c index 9ba9582e7765..315f45cd0778 100644 --- a/drivers/media/tuners/tuner-simple.c +++ b/drivers/media/tuners/tuner-simple.c @@ -275,8 +275,7 @@ static int simple_config_lookup(struct dvb_frontend *fe, *config = t_params->ranges[i].config; *cb = t_params->ranges[i].cb; - tuner_dbg("freq = %d.%02d (%d), range = %d, " - "config = 0x%02x, cb = 0x%02x\n", + tuner_dbg("freq = %d.%02d (%d), range = %d, config = 0x%02x, cb = 0x%02x\n", *frequency / 16, *frequency % 16 * 100 / 16, *frequency, i, *config, *cb); @@ -404,12 +403,12 @@ static int simple_std_setup(struct dvb_frontend *fe, i2c.addr = 0x0a; rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2); if (2 != rc) - tuner_warn("i2c i/o error: rc == %d " - "(should be 2)\n", rc); + tuner_warn("i2c i/o error: rc == %d (should be 2)\n", + rc); rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2); if (2 != rc) - tuner_warn("i2c i/o error: rc == %d " - "(should be 2)\n", rc); + tuner_warn("i2c i/o error: rc == %d (should be 2)\n", + rc); break; } } @@ -463,8 +462,8 @@ static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer, rc = tuner_i2c_xfer_recv(&priv->i2c_props, &status_byte, 1); if (1 != rc) { - tuner_warn("i2c i/o read error: rc == %d " - "(should be 1)\n", rc); + tuner_warn("i2c i/o read error: rc == %d (should be 1)\n", + rc); break; } if (status_byte & TUNER_PLL_LOCKED) @@ -483,8 +482,8 @@ static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer, rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); if (4 != rc) - tuner_warn("i2c i/o error: rc == %d " - "(should be 4)\n", rc); + tuner_warn("i2c i/o error: rc == %d (should be 4)\n", + rc); break; } } @@ -499,8 +498,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) switch (priv->type) { case TUNER_TENA_9533_DI: case TUNER_YMEC_TVF_5533MF: - tuner_dbg("This tuner doesn't have FM. " - "Most cards have a TEA5767 for FM\n"); + tuner_dbg("This tuner doesn't have FM. Most cards have a TEA5767 for FM\n"); return 0; case TUNER_PHILIPS_FM1216ME_MK3: case TUNER_PHILIPS_FM1236_MK3: @@ -586,8 +584,7 @@ static int simple_set_tv_freq(struct dvb_frontend *fe, div = params->frequency + IFPCoff + offset; - tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, " - "Offset=%d.%02d MHz, div=%0d\n", + tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n", params->frequency / 16, params->frequency % 16 * 100 / 16, IFPCoff / 16, IFPCoff % 16 * 100 / 16, offset / 16, offset % 16 * 100 / 16, div); @@ -858,8 +855,7 @@ static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf, if (!tun->stepsize) { /* tuner-core was loaded before the digital tuner was * configured and somehow picked the wrong tuner type */ - tuner_err("attempt to treat tuner %d (%s) as digital tuner " - "without stepsize defined.\n", + tuner_err("attempt to treat tuner %d (%s) as digital tuner without stepsize defined.\n", priv->type, priv->tun->name); return 0; /* failure */ } @@ -1077,8 +1073,7 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 1); if (1 != i2c_transfer(i2c_adap, &msg, 1)) - printk(KERN_WARNING "tuner-simple %d-%04x: " - "unable to probe %s, proceeding anyway.", + printk(KERN_WARNING "tuner-simple %d-%04x: unable to probe %s, proceeding anyway.", i2c_adapter_id(i2c_adap), i2c_addr, tuners[type].name); @@ -1123,18 +1118,16 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, if ((debug) || ((atv_input[priv->nr] > 0) || (dtv_input[priv->nr] > 0))) { if (0 == atv_input[priv->nr]) - tuner_info("tuner %d atv rf input will be " - "autoselected\n", priv->nr); + tuner_info("tuner %d atv rf input will be autoselected\n", + priv->nr); else - tuner_info("tuner %d atv rf input will be " - "set to input %d (insmod option)\n", + tuner_info("tuner %d atv rf input will be set to input %d (insmod option)\n", priv->nr, atv_input[priv->nr]); if (0 == dtv_input[priv->nr]) - tuner_info("tuner %d dtv rf input will be " - "autoselected\n", priv->nr); + tuner_info("tuner %d dtv rf input will be autoselected\n", + priv->nr); else - tuner_info("tuner %d dtv rf input will be " - "set to input %d (insmod option)\n", + tuner_info("tuner %d dtv rf input will be set to input %d (insmod option)\n", priv->nr, dtv_input[priv->nr]); } diff --git a/drivers/media/tuners/tuner-xc2028.c b/drivers/media/tuners/tuner-xc2028.c index 317ef63ee789..e07c5fb59cc6 100644 --- a/drivers/media/tuners/tuner-xc2028.c +++ b/drivers/media/tuners/tuner-xc2028.c @@ -56,8 +56,7 @@ MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n" static char audio_std[8]; module_param_string(audio_std, audio_std, sizeof(audio_std), 0); MODULE_PARM_DESC(audio_std, - "Audio standard. XC3028 audio decoder explicitly " - "needs to know what audio\n" + "Audio standard. XC3028 audio decoder explicitly needs to know what audio\n" "standard is needed for some video standards with audio A2 or NICAM.\n" "The valid values are:\n" "A2\n" @@ -69,8 +68,8 @@ MODULE_PARM_DESC(audio_std, static char firmware_name[30]; module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); -MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " - "default firmware name\n"); +MODULE_PARM_DESC(firmware_name, + "Firmware file name. Allows overriding the default firmware name\n"); static LIST_HEAD(hybrid_tuner_instance_list); static DEFINE_MUTEX(xc2028_list_mutex); @@ -179,67 +178,67 @@ static int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val) static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq) { if (type & BASE) - printk("BASE "); + printk(KERN_CONT "BASE "); if (type & INIT1) - printk("INIT1 "); + printk(KERN_CONT "INIT1 "); if (type & F8MHZ) - printk("F8MHZ "); + printk(KERN_CONT "F8MHZ "); if (type & MTS) - printk("MTS "); + printk(KERN_CONT "MTS "); if (type & D2620) - printk("D2620 "); + printk(KERN_CONT "D2620 "); if (type & D2633) - printk("D2633 "); + printk(KERN_CONT "D2633 "); if (type & DTV6) - printk("DTV6 "); + printk(KERN_CONT "DTV6 "); if (type & QAM) - printk("QAM "); + printk(KERN_CONT "QAM "); if (type & DTV7) - printk("DTV7 "); + printk(KERN_CONT "DTV7 "); if (type & DTV78) - printk("DTV78 "); + printk(KERN_CONT "DTV78 "); if (type & DTV8) - printk("DTV8 "); + printk(KERN_CONT "DTV8 "); if (type & FM) - printk("FM "); + printk(KERN_CONT "FM "); if (type & INPUT1) - printk("INPUT1 "); + printk(KERN_CONT "INPUT1 "); if (type & LCD) - printk("LCD "); + printk(KERN_CONT "LCD "); if (type & NOGD) - printk("NOGD "); + printk(KERN_CONT "NOGD "); if (type & MONO) - printk("MONO "); + printk(KERN_CONT "MONO "); if (type & ATSC) - printk("ATSC "); + printk(KERN_CONT "ATSC "); if (type & IF) - printk("IF "); + printk(KERN_CONT "IF "); if (type & LG60) - printk("LG60 "); + printk(KERN_CONT "LG60 "); if (type & ATI638) - printk("ATI638 "); + printk(KERN_CONT "ATI638 "); if (type & OREN538) - printk("OREN538 "); + printk(KERN_CONT "OREN538 "); if (type & OREN36) - printk("OREN36 "); + printk(KERN_CONT "OREN36 "); if (type & TOYOTA388) - printk("TOYOTA388 "); + printk(KERN_CONT "TOYOTA388 "); if (type & TOYOTA794) - printk("TOYOTA794 "); + printk(KERN_CONT "TOYOTA794 "); if (type & DIBCOM52) - printk("DIBCOM52 "); + printk(KERN_CONT "DIBCOM52 "); if (type & ZARLINK456) - printk("ZARLINK456 "); + printk(KERN_CONT "ZARLINK456 "); if (type & CHINA) - printk("CHINA "); + printk(KERN_CONT "CHINA "); if (type & F6MHZ) - printk("F6MHZ "); + printk(KERN_CONT "F6MHZ "); if (type & INPUT2) - printk("INPUT2 "); + printk(KERN_CONT "INPUT2 "); if (type & SCODE) - printk("SCODE "); + printk(KERN_CONT "SCODE "); if (type & HAS_IF) - printk("HAS_IF_%d ", int_freq); + printk(KERN_CONT "HAS_IF_%d ", int_freq); } static v4l2_std_id parse_audio_std_option(void) @@ -346,8 +345,7 @@ static int load_all_firmwares(struct dvb_frontend *fe, n++; if (n >= n_array) { - tuner_err("More firmware images in file than " - "were expected!\n"); + tuner_err("More firmware images in file than were expected!\n"); goto corrupt; } @@ -374,8 +372,8 @@ static int load_all_firmwares(struct dvb_frontend *fe, if (!size || size > endp - p) { tuner_err("Firmware type "); dump_firm_type(type); - printk("(%x), id %llx is corrupted " - "(size=%d, expected %d)\n", + printk(KERN_CONT + "(%x), id %llx is corrupted (size=%d, expected %d)\n", type, (unsigned long long)id, (unsigned)(endp - p), size); goto corrupt; @@ -390,7 +388,7 @@ static int load_all_firmwares(struct dvb_frontend *fe, tuner_dbg("Reading firmware type "); if (debug) { dump_firm_type_and_int_freq(type, int_freq); - printk("(%x), id %llx, size=%d.\n", + printk(KERN_CONT "(%x), id %llx, size=%d.\n", type, (unsigned long long)id, size); } @@ -439,7 +437,8 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, tuner_dbg("%s called, want type=", __func__); if (debug) { dump_firm_type(type); - printk("(%x), id %016llx.\n", type, (unsigned long long)*id); + printk(KERN_CONT "(%x), id %016llx.\n", + type, (unsigned long long)*id); } if (!priv->firm) { @@ -495,10 +494,11 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, } if (best_nr_matches > 0) { - tuner_dbg("Selecting best matching firmware (%d bits) for " - "type=", best_nr_matches); + tuner_dbg("Selecting best matching firmware (%d bits) for type=", + best_nr_matches); dump_firm_type(type); - printk("(%x), id %016llx:\n", type, (unsigned long long)*id); + printk(KERN_CONT + "(%x), id %016llx:\n", type, (unsigned long long)*id); i = best_i; goto found; } @@ -515,7 +515,8 @@ ret: tuner_dbg("%s firmware for type=", (i < 0) ? "Can't find" : "Found"); if (debug) { dump_firm_type(type); - printk("(%x), id %016llx.\n", type, (unsigned long long)*id); + printk(KERN_CONT "(%x), id %016llx.\n", + type, (unsigned long long)*id); } return i; } @@ -555,8 +556,8 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type, tuner_info("Loading firmware for type="); dump_firm_type(priv->firm[pos].type); - printk("(%x), id %016llx.\n", priv->firm[pos].type, - (unsigned long long)*id); + printk(KERN_CONT "(%x), id %016llx.\n", + priv->firm[pos].type, (unsigned long long)*id); p = priv->firm[pos].ptr; endp = p + priv->firm[pos].size; @@ -689,7 +690,7 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, tuner_info("Loading SCODE for type="); dump_firm_type_and_int_freq(priv->firm[pos].type, priv->firm[pos].int_freq); - printk("(%x), id %016llx.\n", priv->firm[pos].type, + printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type, (unsigned long long)*id); if (priv->firm_version < 0x0202) @@ -741,15 +742,15 @@ retry: tuner_dbg("checking firmware, user requested type="); if (debug) { dump_firm_type(new_fw.type); - printk("(%x), id %016llx, ", new_fw.type, + printk(KERN_CONT "(%x), id %016llx, ", new_fw.type, (unsigned long long)new_fw.std_req); if (!int_freq) { - printk("scode_tbl "); + printk(KERN_CONT "scode_tbl "); dump_firm_type(priv->ctrl.scode_table); - printk("(%x), ", priv->ctrl.scode_table); + printk(KERN_CONT "(%x), ", priv->ctrl.scode_table); } else - printk("int_freq %d, ", new_fw.int_freq); - printk("scode_nr %d\n", new_fw.scode_nr); + printk(KERN_CONT "int_freq %d, ", new_fw.int_freq); + printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr); } /* @@ -837,8 +838,7 @@ check_device: goto fail; } - tuner_dbg("Device is Xceive %d version %d.%d, " - "firmware version %d.%d\n", + tuner_dbg("Device is Xceive %d version %d.%d, firmware version %d.%d\n", hwmodel, (version & 0xf000) >> 12, (version & 0xf00) >> 8, (version & 0xf0) >> 4, version & 0xf); @@ -852,8 +852,7 @@ check_device: tuner_err("Incorrect readback of firmware version.\n"); goto fail; } else { - tuner_err("Returned an incorrect version. However, " - "read is not reliable enough. Ignoring it.\n"); + tuner_err("Returned an incorrect version. However, read is not reliable enough. Ignoring it.\n"); hwmodel = 3028; } } @@ -864,8 +863,7 @@ check_device: priv->hwvers = version & 0xff00; } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel || priv->hwvers != (version & 0xff00)) { - tuner_err("Read invalid device hardware information - tuner " - "hung?\n"); + tuner_err("Read invalid device hardware information - tuner hung?\n"); goto fail; } diff --git a/drivers/media/tuners/xc4000.c b/drivers/media/tuners/xc4000.c index d95c7e082ccf..ac98dea985c8 100644 --- a/drivers/media/tuners/xc4000.c +++ b/drivers/media/tuners/xc4000.c @@ -43,14 +43,11 @@ MODULE_PARM_DESC(debug, "Debugging level (0 to 2, default: 0 (off))."); static int no_poweroff; module_param(no_poweroff, int, 0644); -MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, " - "0 (default): use device-specific default mode)."); +MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, 0 (default): use device-specific default mode)."); static int audio_std; module_param(audio_std, int, 0644); -MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly " - "needs to know what audio standard is needed for some video standards " - "with audio A2 or NICAM. The valid settings are a sum of:\n" +MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly needs to know what audio standard is needed for some video standards with audio A2 or NICAM. The valid settings are a sum of:\n" " 1: use NICAM/B or A2/B instead of NICAM/A or A2/A\n" " 2: use A2 instead of NICAM or BTSC\n" " 4: use SECAM/K3 instead of K1\n" @@ -60,8 +57,7 @@ MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly " static char firmware_name[30]; module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); -MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " - "default firmware name."); +MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the default firmware name."); static DEFINE_MUTEX(xc4000_list_mutex); static LIST_HEAD(hybrid_tuner_instance_list); @@ -290,8 +286,7 @@ static int xc4000_tuner_reset(struct dvb_frontend *fe) return -EREMOTEIO; } } else { - printk(KERN_ERR "xc4000: no tuner reset callback function, " - "fatal\n"); + printk(KERN_ERR "xc4000: no tuner reset callback function, fatal\n"); return -EINVAL; } return 0; @@ -679,8 +674,7 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, if (best_nr_diffs > 0U) { printk(KERN_WARNING - "Selecting best matching firmware (%u bits differ) for " - "type=(%x), id %016llx:\n", + "Selecting best matching firmware (%u bits differ) for type=(%x), id %016llx:\n", best_nr_diffs, type, (unsigned long long)*id); i = best_i; } @@ -800,8 +794,7 @@ static int xc4000_fwupload(struct dvb_frontend *fe) n++; if (n >= n_array) { - printk(KERN_ERR "More firmware images in file than " - "were expected!\n"); + printk(KERN_ERR "More firmware images in file than were expected!\n"); goto corrupt; } @@ -1055,8 +1048,7 @@ check_device: goto fail; } - dprintk(1, "Device is Xceive %d version %d.%d, " - "firmware version %d.%d\n", + dprintk(1, "Device is Xceive %d version %d.%d, firmware version %d.%d\n", hwmodel, hw_major, hw_minor, fw_major, fw_minor); /* Check firmware version against what we downloaded. */ @@ -1076,8 +1068,7 @@ check_device: } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel || priv->hwvers != ((hw_major << 8) | hw_minor)) { printk(KERN_WARNING - "Read invalid device hardware information - tuner " - "hung?\n"); + "Read invalid device hardware information - tuner hung?\n"); goto fail; } diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig index 7496f332f3f5..c9644b62f91a 100644 --- a/drivers/media/usb/Kconfig +++ b/drivers/media/usb/Kconfig @@ -60,5 +60,10 @@ source "drivers/media/usb/hackrf/Kconfig" source "drivers/media/usb/msi2500/Kconfig" endif +if MEDIA_CEC_SUPPORT + comment "USB HDMI CEC adapters" +source "drivers/media/usb/pulse8-cec/Kconfig" +endif + endif #MEDIA_USB_SUPPORT endif #USB diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile index 8874ba774a34..0f15e3351ddc 100644 --- a/drivers/media/usb/Makefile +++ b/drivers/media/usb/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ obj-$(CONFIG_VIDEO_USBTV) += usbtv/ obj-$(CONFIG_VIDEO_GO7007) += go7007/ obj-$(CONFIG_DVB_AS102) += as102/ +obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec/ diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 85dd9a8e83ff..7a10eaa38f67 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -253,8 +253,7 @@ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets, dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev, sb_size, GFP_KERNEL, &urb->transfer_dma); if (!dev->isoc_ctl.transfer_buffer[i]) { - printk("unable to allocate %i bytes for transfer" - " buffer %i%s\n", + printk("unable to allocate %i bytes for transfer buffer %i%s\n", sb_size, i, in_interrupt() ? " while in int" : ""); au0828_uninit_isoc(dev); diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index 52bc42da8a4c..788c73803138 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -33,8 +33,7 @@ static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2," - "ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS); +MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS); #undef DEBSTATUS #define deb_info(args...) dprintk(0x01, args) @@ -433,8 +432,8 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) frame_size, i, j, ret; int buffer_offset = 0; - deb_ts("creating %d iso-urbs with %d frames " - "each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB, + deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n", + B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize); fc_usb->iso_buffer = usb_alloc_coherent(fc_usb->udev, @@ -459,8 +458,8 @@ static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) { int frame_offset = 0; struct urb *urb = fc_usb->iso_urb[i]; - deb_ts("initializing and submitting urb no. %d " - "(buf_offset: %d).\n", i, buffer_offset); + deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n", + i, buffer_offset); urb->dev = fc_usb->udev; urb->context = fc_usb; diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c index e9100a235831..37f9b30b0abc 100644 --- a/drivers/media/usb/cpia2/cpia2_usb.c +++ b/drivers/media/usb/cpia2/cpia2_usb.c @@ -759,9 +759,7 @@ int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate) cam->params.camera_state.stream_mode = old_alt; ret2 = set_alternate(cam, USBIF_CMDONLY); if (ret2 < 0) { - ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already " - "failed. Then tried to call " - "set_alternate(USBIF_CMDONLY) = %d.\n", + ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already failed. Then tried to call set_alternate(USBIF_CMDONLY) = %d.\n", alternate, ret, ret2); } } else { diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c index 8b099fe1d592..550ec932f931 100644 --- a/drivers/media/usb/cx231xx/cx231xx-core.c +++ b/drivers/media/usb/cx231xx/cx231xx-core.c @@ -241,8 +241,7 @@ static int __usb_control_msg(struct cx231xx *dev, unsigned int pipe, int rc, i; if (reg_debug) { - printk(KERN_DEBUG "%s: (pipe 0x%08x): " - "%s: %02x %02x %02x %02x %02x %02x %02x %02x ", + printk(KERN_DEBUG "%s: (pipe 0x%08x): %s: %02x %02x %02x %02x %02x %02x %02x %02x ", dev->name, pipe, (requesttype & USB_DIR_IN) ? "IN" : "OUT", @@ -441,8 +440,7 @@ int cx231xx_write_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg, char *buf, if (reg_debug) { int byte; - cx231xx_isocdbg("(pipe 0x%08x): " - "OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>", + cx231xx_isocdbg("(pipe 0x%08x): OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>", pipe, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, req, 0, val, reg & 0xff, @@ -600,8 +598,8 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt) return -1; } - cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u," - "Interface = %d\n", alt, max_pkt_size, + cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u,Interface = %d\n", + alt, max_pkt_size, usb_interface_index); if (usb_interface_index > 0) { diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c index 1417515d30eb..2868546999ca 100644 --- a/drivers/media/usb/cx231xx/cx231xx-dvb.c +++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c @@ -377,8 +377,8 @@ static int attach_xc5000(u8 addr, struct cx231xx *dev) cfg.i2c_addr = addr; if (!dev->dvb->frontend) { - dev_err(dev->dev, "%s/2: dvb frontend not attached. " - "Can't attach xc5000\n", dev->name); + dev_err(dev->dev, "%s/2: dvb frontend not attached. Can't attach xc5000\n", + dev->name); return -EINVAL; } diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 8961dd732522..c673726d9b70 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -2095,6 +2095,8 @@ static const struct usb_device_id af9035_id_table[] = { &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) }, { DVB_USB_DEVICE(USB_VID_AVERMEDIA, 0x0337, &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_EVOLVEO_XTRATV_STICK, + &af9035_props, "EVOLVEO XtraTV stick", NULL) }, /* IT9135 devices */ { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135, diff --git a/drivers/media/usb/dvb-usb-v2/dvbsky.c b/drivers/media/usb/dvb-usb-v2/dvbsky.c index 02dbc6c45423..0636eac37bbb 100644 --- a/drivers/media/usb/dvb-usb-v2/dvbsky.c +++ b/drivers/media/usb/dvb-usb-v2/dvbsky.c @@ -851,6 +851,10 @@ static const struct usb_device_id dvbsky_id_table[] = { USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI_2, &dvbsky_t680c_props, "TechnoTrend TT-connect CT2-4650 CI v1.1", RC_MAP_TT_1500) }, + { DVB_USB_DEVICE(USB_VID_TECHNOTREND, + USB_PID_TECHNOTREND_CONNECT_S2_4650_CI, + &dvbsky_s960c_props, "TechnoTrend TT-connect S2-4650 CI", + RC_MAP_TT_1500) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_3, &dvbsky_t680c_props, "Terratec H7 Rev.4", diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c index 0e8fb89896c4..5fea02672685 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -156,21 +156,19 @@ struct lme2510_state { static int lme2510_bulk_write(struct usb_device *dev, u8 *snd, int len, u8 pipe) { - int ret, actual_l; + int actual_l; - ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe), - snd, len , &actual_l, 100); - return ret; + return usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe), + snd, len, &actual_l, 100); } static int lme2510_bulk_read(struct usb_device *dev, u8 *rev, int len, u8 pipe) { - int ret, actual_l; + int actual_l; - ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe), - rev, len , &actual_l, 200); - return ret; + return usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe), + rev, len, &actual_l, 200); } static int lme2510_usb_talk(struct dvb_usb_device *d, diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c index 283495c84ba3..6427137a09ef 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c @@ -666,8 +666,8 @@ static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state, if (rd_status[i] == 0x04) { if (i < 7) { - mxl_i2c("i2c fifo empty!" - " @ %d", i); + mxl_i2c("i2c fifo empty! @ %d", + i); msg->buf[(index*8)+i] = i2c_r_data[(i*3)+1]; /* read again */ @@ -692,8 +692,7 @@ static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state, } goto stop_copy; } else { - mxl_i2c("readagain " - "ERROR!"); + mxl_i2c("readagain ERROR!"); } } else { msg->buf[(index*8)+i] = @@ -827,9 +826,8 @@ int mxl111sf_i2c_xfer(struct i2c_adapter *adap, mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) : mxl111sf_i2c_sw_xfer_msg(state, &msg[i]); if (mxl_fail(ret)) { - mxl_debug_adv("failed with error %d on i2c " - "transaction %d of %d, %sing %d bytes " - "to/from 0x%02x", ret, i+1, num, + mxl_debug_adv("failed with error %d on i2c transaction %d of %d, %sing %d bytes to/from 0x%02x", + ret, i+1, num, (msg[i].flags & I2C_M_RD) ? "read" : "writ", msg[i].len, msg[i].addr); diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 5d676b533a3a..80c635980526 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -29,8 +29,7 @@ int dvb_usb_mxl111sf_debug; module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level " - "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able))."); +MODULE_PARM_DESC(debug, "set debugging level (1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able))."); static int dvb_usb_mxl111sf_isoc; module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644); @@ -137,8 +136,8 @@ int mxl111sf_write_reg_mask(struct mxl111sf_state *state, #if 1 /* dont know why this usually errors out on the first try */ if (mxl_fail(ret)) - pr_err("error writing addr: 0x%02x, mask: 0x%02x, " - "data: 0x%02x, retrying...", addr, mask, data); + pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...", + addr, mask, data); ret = mxl111sf_read_reg(state, addr, &val); #endif @@ -946,8 +945,7 @@ static int mxl111sf_init(struct dvb_usb_device *d) case 138001: break; default: - printk(KERN_WARNING "%s: warning: " - "unknown hauppauge model #%d\n", + printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n", __func__, state->tv.model); } #endif diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index 290275bc7fde..6404205560eb 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -34,8 +34,7 @@ int dvb_usb_cinergyt2_debug; module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " - "(or-able))."); +MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 (or-able))."); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -93,8 +92,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0); if (ret < 0) { - deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " - "state info\n"); + deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n"); } mutex_unlock(&d->data_mutex); diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index 47ce9d5de4c6..dd5edd3a17ee 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -16,10 +16,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-ab static int nb_packet_buffer_size = 21; module_param(nb_packet_buffer_size, int, 0644); MODULE_PARM_DESC(nb_packet_buffer_size, - "Set the dib0700 driver data buffer size. This parameter " - "corresponds to the number of TS packets. The actual size of " - "the data buffer corresponds to this parameter " - "multiplied by 188 (default: 21)"); + "Set the dib0700 driver data buffer size. This parameter corresponds to the number of TS packets. The actual size of the data buffer corresponds to this parameter multiplied by 188 (default: 21)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c index ef1b8ee75c57..b29d4894c2f1 100644 --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -26,8 +26,7 @@ static int force_lna_activation; module_param(force_lna_activation, int, 0644); -MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), " - "if applicable for the device (default: 0=automatic/off)."); +MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), if applicable for the device (default: 0=automatic/off)."); struct dib0700_adapter_state { int (*set_param_save) (struct dvb_frontend *); diff --git a/drivers/media/usb/dvb-usb/dvb-usb-dvb.c b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c index a04c0a250625..e5675da286cb 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-dvb.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c @@ -277,8 +277,7 @@ int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap) for (i = 0; i < adap->props.num_frontends; i++) { if (adap->props.fe[i].frontend_attach == NULL) { - err("strange: '%s' #%d,%d " - "doesn't want to attach a frontend.", + err("strange: '%s' #%d,%d doesn't want to attach a frontend.", adap->dev->desc->name, adap->id, i); return 0; diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c index dd048a7c461c..f0023dbb7276 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c @@ -49,8 +49,7 @@ int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len); if (ret != hx.len) { - err("error while transferring firmware " - "(transferred size: %d, block size: %d)", + err("error while transferring firmware (transferred size: %d, block size: %d)", ret,hx.len); ret = -EINVAL; break; @@ -81,8 +80,7 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_pro const struct firmware *fw = NULL; if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) { - err("did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", props->firmware,ret); return ret; } diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h index 107255b08b2b..67f898b6f6d0 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb.h +++ b/drivers/media/usb/dvb-usb/dvb-usb.h @@ -467,8 +467,10 @@ extern int dvb_usb_device_init(struct usb_interface *, extern void dvb_usb_device_exit(struct usb_interface *); /* the generic read/write method for device control */ -extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int); -extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16); +extern int __must_check +dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16, int); +extern int __must_check +dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16); /* commonly used remote control parsing */ extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *); diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 2c720cb2fb00..6ca502d834b4 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -86,8 +86,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))." /* demod probe */ static int demod_probe = 1; module_param_named(demod, demod_probe, int, 0644); -MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 " - "4=stv0903+stb6100(or-able))."); +MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 4=stv0903+stb6100(or-able))."); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -1642,6 +1641,7 @@ enum dw2102_table_entry { TEVII_S632, TERRATEC_CINERGY_S2_R2, TERRATEC_CINERGY_S2_R3, + TERRATEC_CINERGY_S2_R4, GOTVIEW_SAT_HD, GENIATECH_T220, TECHNOTREND_S2_4600, @@ -1671,6 +1671,7 @@ static struct usb_device_id dw2102_table[] = { [TEVII_S632] = {USB_DEVICE(0x9022, USB_PID_TEVII_S632)}, [TERRATEC_CINERGY_S2_R2] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R2)}, [TERRATEC_CINERGY_S2_R3] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R3)}, + [TERRATEC_CINERGY_S2_R4] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R4)}, [GOTVIEW_SAT_HD] = {USB_DEVICE(0x1FE1, USB_PID_GOTVIEW_SAT_HD)}, [GENIATECH_T220] = {USB_DEVICE(0x1f4d, 0xD220)}, [TECHNOTREND_S2_4600] = {USB_DEVICE(USB_VID_TECHNOTREND, @@ -2343,12 +2344,7 @@ static struct usb_driver dw2102_driver = { module_usb_driver(dw2102_driver); MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); -MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104," - " DVB-C 3101 USB2.0," - " TeVii S421, S480, S482, S600, S630, S632, S650," - " TeVii S660, S662, Prof 1100, 7500 USB2.0," - " Geniatech SU3000, T220," - " TechnoTrend S2-4600, Terratec Cinergy S2 devices"); +MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101 USB2.0, TeVii S421, S480, S482, S600, S630, S632, S650, TeVii S660, S662, Prof 1100, 7500 USB2.0, Geniatech SU3000, T220, TechnoTrend S2-4600, Terratec Cinergy S2 devices"); MODULE_VERSION("0.1"); MODULE_LICENSE("GPL"); MODULE_FIRMWARE(DW2101_FIRMWARE); diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c index 474a17e4db0c..62abe6c43a32 100644 --- a/drivers/media/usb/dvb-usb/friio.c +++ b/drivers/media/usb/dvb-usb/friio.c @@ -320,8 +320,8 @@ restart: */ if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */ if (++retry > 3) { - deb_info("failed to get the correct" - " FE demod status:0x%02x\n", rbuf[0]); + deb_info("failed to get the correct FE demod status:0x%02x\n", + rbuf[0]); goto error; } msleep(100); diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 993bb7a72985..2360e7e32b06 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -135,8 +135,7 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) u8 *buf; if ((ret = request_firmware(&fw, bcm4500_firmware, &d->udev->dev)) != 0) { - err("did not find the bcm4500 firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + err("did not find the bcm4500 firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", bcm4500_firmware,ret); return ret; } diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c index eafc5c82467f..70672e1e5ec7 100644 --- a/drivers/media/usb/dvb-usb/m920x.c +++ b/drivers/media/usb/dvb-usb/m920x.c @@ -55,13 +55,9 @@ static inline int m920x_read(struct usb_device *udev, u8 request, u16 value, static inline int m920x_write(struct usb_device *udev, u8 request, u16 value, u16 index) { - int ret; - - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - request, USB_TYPE_VENDOR | USB_DIR_OUT, - value, index, NULL, 0, 2000); - - return ret; + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), request, + USB_TYPE_VENDOR | USB_DIR_OUT, value, index, + NULL, 0, 2000); } static inline int m920x_write_seq(struct usb_device *udev, u8 request, diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c index 2566d2f1c2ad..946a5ccc8f1a 100644 --- a/drivers/media/usb/dvb-usb/opera1.c +++ b/drivers/media/usb/dvb-usb/opera1.c @@ -453,8 +453,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev, info("start downloading fpga firmware %s",filename); if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { - err("did not find the firmware file. (%s) " - "Please see linux/Documentation/dvb/ for more details on firmware-problems.", + err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.", filename); return ret; } else { diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c index 4706628a3ed5..02c3bee6f83b 100644 --- a/drivers/media/usb/dvb-usb/technisat-usb2.c +++ b/drivers/media/usb/dvb-usb/technisat-usb2.c @@ -50,8 +50,7 @@ MODULE_PARM_DESC(debug, static int disable_led_control; module_param(disable_led_control, int, 0444); MODULE_PARM_DESC(disable_led_control, - "disable LED control of the device " - "(default: 0 - LED control is active)."); + "disable LED control of the device (default: 0 - LED control is active)."); /* device private data */ struct technisat_usb2_state { diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c index e11fe46a547c..06e495615296 100644 --- a/drivers/media/usb/em28xx/em28xx-audio.c +++ b/drivers/media/usb/em28xx/em28xx-audio.c @@ -3,7 +3,7 @@ * * Copyright (C) 2006 Markus Rechberger <mrechberger@gmail.com> * - * Copyright (C) 2007-2014 Mauro Carvalho Chehab + * Copyright (C) 2007-2016 Mauro Carvalho Chehab * - Port to work with the in-kernel driver * - Cleanups, fixes, alsa-controls, etc. * @@ -25,6 +25,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include "em28xx.h" + #include <linux/kernel.h> #include <linux/usb.h> #include <linux/init.h> @@ -44,7 +46,6 @@ #include <sound/tlv.h> #include <sound/ac97_codec.h> #include <media/v4l2-common.h> -#include "em28xx.h" static int debug; module_param(debug, int, 0644); @@ -55,9 +56,8 @@ MODULE_PARM_DESC(debug, "activates debug info"); #define dprintk(fmt, arg...) do { \ if (debug) \ - printk(KERN_INFO "em28xx-audio %s: " fmt, \ - __func__, ##arg); \ - } while (0) + printk(KERN_DEBUG pr_fmt("audio: %s: " fmt), \ + __func__, ##arg); } while (0) static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; @@ -164,7 +164,7 @@ static void em28xx_audio_isocirq(struct urb *urb) status = usb_submit_urb(urb, GFP_ATOMIC); if (status < 0) - em28xx_errdev("resubmit of audio urb failed (error=%i)\n", + pr_err("resubmit of audio urb failed (error=%i)\n", status); return; } @@ -182,7 +182,7 @@ static int em28xx_init_audio_isoc(struct em28xx *dev) errCode = usb_submit_urb(dev->adev.urb[i], GFP_ATOMIC); if (errCode) { - em28xx_errdev("submit of audio urb failed (error=%i)\n", + pr_err("submit of audio urb failed (error=%i)\n", errCode); em28xx_deinit_isoc_audio(dev); atomic_set(&dev->adev.stream_started, 0); @@ -254,8 +254,7 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) int nonblock, ret = 0; if (!dev) { - em28xx_err("BUG: em28xx can't find device struct." - " Can't proceed with open\n"); + pr_err("BUG: em28xx can't find device struct. Can't proceed with open\n"); return -ENODEV; } @@ -318,7 +317,7 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) err: mutex_unlock(&dev->lock); - em28xx_err("Error while configuring em28xx mixer\n"); + pr_err("Error while configuring em28xx mixer\n"); return ret; } @@ -756,7 +755,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev) intf = usb_ifnum_to_if(dev->udev, dev->ifnum); if (intf->num_altsetting <= alt) { - em28xx_errdev("alt %d doesn't exist on interface %d\n", + pr_err("alt %d doesn't exist on interface %d\n", dev->ifnum, alt); return -ENODEV; } @@ -772,14 +771,14 @@ static int em28xx_audio_urb_init(struct em28xx *dev) } if (!ep) { - em28xx_errdev("Couldn't find an audio endpoint"); + pr_err("Couldn't find an audio endpoint"); return -ENODEV; } ep_size = em28xx_audio_ep_packet_size(dev->udev, ep); interval = 1 << (ep->bInterval - 1); - em28xx_info("Endpoint 0x%02x %s on intf %d alt %d interval = %d, size %d\n", + pr_info("Endpoint 0x%02x %s on intf %d alt %d interval = %d, size %d\n", EM28XX_EP_AUDIO, usb_speed_string(dev->udev->speed), dev->ifnum, alt, interval, @@ -820,7 +819,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev) if (urb_size > ep_size * npackets) npackets = DIV_ROUND_UP(urb_size, ep_size); - em28xx_info("Number of URBs: %d, with %d packets and %d size\n", + pr_info("Number of URBs: %d, with %d packets and %d size\n", num_urb, npackets, urb_size); /* Estimate the bytes per period */ @@ -858,7 +857,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev) buf = usb_alloc_coherent(dev->udev, npackets * ep_size, GFP_ATOMIC, &urb->transfer_dma); if (!buf) { - em28xx_errdev("usb_alloc_coherent failed!\n"); + pr_err("usb_alloc_coherent failed!\n"); em28xx_audio_free_urb(dev); return -ENOMEM; } @@ -898,14 +897,12 @@ static int em28xx_audio_init(struct em28xx *dev) return 0; } - em28xx_info("Binding audio extension\n"); + pr_info("Binding audio extension\n"); kref_get(&dev->ref); - printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus " - "Rechberger\n"); - printk(KERN_INFO - "em28xx-audio.c: Copyright (C) 2007-2014 Mauro Carvalho Chehab\n"); + pr_info("em28xx-audio.c: Copyright (C) 2006 Markus Rechberger\n"); + pr_info("em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab\n"); err = snd_card_new(&dev->udev->dev, index[devnr], "Em28xx Audio", THIS_MODULE, 0, &card); @@ -955,7 +952,7 @@ static int em28xx_audio_init(struct em28xx *dev) if (err < 0) goto urb_free; - em28xx_info("Audio extension successfully initialized\n"); + pr_info("Audio extension successfully initialized\n"); return 0; urb_free: @@ -980,7 +977,7 @@ static int em28xx_audio_fini(struct em28xx *dev) return 0; } - em28xx_info("Closing audio extension\n"); + pr_info("Closing audio extension\n"); if (dev->adev.sndcard) { snd_card_disconnect(dev->adev.sndcard); @@ -1004,7 +1001,7 @@ static int em28xx_audio_suspend(struct em28xx *dev) if (dev->usb_audio_type != EM28XX_USB_AUDIO_VENDOR) return 0; - em28xx_info("Suspending audio extension\n"); + pr_info("Suspending audio extension\n"); em28xx_deinit_isoc_audio(dev); atomic_set(&dev->adev.stream_started, 0); return 0; @@ -1018,7 +1015,7 @@ static int em28xx_audio_resume(struct em28xx *dev) if (dev->usb_audio_type != EM28XX_USB_AUDIO_VENDOR) return 0; - em28xx_info("Resuming audio extension\n"); + pr_info("Resuming audio extension\n"); /* Nothing to do other than schedule_work() ?? */ schedule_work(&dev->adev.wq_trigger); return 0; diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c index 72f3f4d50253..a24695474212 100644 --- a/drivers/media/usb/em28xx/em28xx-camera.c +++ b/drivers/media/usb/em28xx/em28xx-camera.c @@ -19,14 +19,14 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include "em28xx.h" + #include <linux/i2c.h> #include <media/soc_camera.h> #include <media/i2c/mt9v011.h> #include <media/v4l2-clk.h> #include <media/v4l2-common.h> -#include "em28xx.h" - /* Possible i2c addresses of Micron sensors */ static unsigned short micron_sensor_addrs[] = { 0xb8 >> 1, /* MT9V111, MT9V403 */ @@ -120,14 +120,14 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) ret = i2c_master_send(&client, ®, 1); if (ret < 0) { if (ret != -ENXIO) - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } ret = i2c_master_recv(&client, (u8 *)&id_be, 2); if (ret < 0) { - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } id = be16_to_cpu(id_be); @@ -135,14 +135,14 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) reg = 0xff; ret = i2c_master_send(&client, ®, 1); if (ret < 0) { - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } ret = i2c_master_recv(&client, (u8 *)&id_be, 2); if (ret < 0) { - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } /* Validate chip ID to be sure we have a Micron device */ @@ -180,15 +180,14 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) dev->em28xx_sensor = EM28XX_MT9M001; break; default: - em28xx_info("unknown Micron sensor detected: 0x%04x\n", - id); + pr_info("unknown Micron sensor detected: 0x%04x\n", id); return 0; } if (dev->em28xx_sensor == EM28XX_NOSENSOR) - em28xx_info("unsupported sensor detected: %s\n", name); + pr_info("unsupported sensor detected: %s\n", name); else - em28xx_info("sensor %s detected\n", name); + pr_info("sensor %s detected\n", name); dev->i2c_client[dev->def_i2c_bus].addr = client.addr; return 0; @@ -218,16 +217,16 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { if (ret != -ENXIO) - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } id = ret << 8; reg = 0x1d; ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } id += ret; @@ -238,16 +237,16 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) reg = 0x0a; ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } id = ret << 8; reg = 0x0b; ret = i2c_smbus_read_byte_data(&client, reg); if (ret < 0) { - em28xx_errdev("couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + pr_err("couldn't read from i2c device 0x%02x: error %i\n", + client.addr << 1, ret); continue; } id += ret; @@ -285,15 +284,15 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) name = "OV9655"; break; default: - em28xx_info("unknown OmniVision sensor detected: 0x%04x\n", - id); + pr_info("unknown OmniVision sensor detected: 0x%04x\n", + id); return 0; } if (dev->em28xx_sensor == EM28XX_NOSENSOR) - em28xx_info("unsupported sensor detected: %s\n", name); + pr_info("unsupported sensor detected: %s\n", name); else - em28xx_info("sensor %s detected\n", name); + pr_info("sensor %s detected\n", name); dev->i2c_client[dev->def_i2c_bus].addr = client.addr; return 0; @@ -317,7 +316,7 @@ int em28xx_detect_sensor(struct em28xx *dev) */ if (dev->em28xx_sensor == EM28XX_NOSENSOR && ret < 0) { - em28xx_info("No sensor detected\n"); + pr_info("No sensor detected\n"); return -ENODEV; } diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index e397f544f108..898fab136534 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -23,6 +23,8 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include "em28xx.h" + #include <linux/init.h> #include <linux/module.h> #include <linux/slab.h> @@ -39,7 +41,6 @@ #include <media/v4l2-common.h> #include <sound/ac97_codec.h> -#include "em28xx.h" #define DRIVER_NAME "em28xx" @@ -1560,8 +1561,7 @@ struct em28xx_board em28xx_boards[] = { } }, }, [EM2820_BOARD_PINNACLE_DVC_90] = { - .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " - "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", + .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", .tuner_type = TUNER_ABSENT, /* capture only board */ .decoder = EM28XX_SAA711X, .input = { { @@ -2677,7 +2677,7 @@ static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, msleep(50); } - em28xx_warn("AC97 registers access is not reliable !\n"); + pr_warn("AC97 registers access is not reliable !\n"); return -ETIMEDOUT; } @@ -2831,16 +2831,13 @@ static int em28xx_hint_board(struct em28xx *dev) dev->model = em28xx_eeprom_hash[i].model; dev->tuner_type = em28xx_eeprom_hash[i].tuner; - em28xx_errdev("Your board has no unique USB ID.\n"); - em28xx_errdev("A hint were successfully done, " - "based on eeprom hash.\n"); - em28xx_errdev("This method is not 100%% failproof.\n"); - em28xx_errdev("If the board were missdetected, " - "please email this log to:\n"); - em28xx_errdev("\tV4L Mailing List " - " <linux-media@vger.kernel.org>\n"); - em28xx_errdev("Board detected as %s\n", - em28xx_boards[dev->model].name); + pr_err("Your board has no unique USB ID.\n"); + pr_err("A hint were successfully done, based on eeprom hash.\n"); + pr_err("This method is not 100%% failproof.\n"); + pr_err("If the board were missdetected, please email this log to:\n"); + pr_err("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); + pr_err("Board detected as %s\n", + em28xx_boards[dev->model].name); return 0; } @@ -2863,35 +2860,28 @@ static int em28xx_hint_board(struct em28xx *dev) if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { dev->model = em28xx_i2c_hash[i].model; dev->tuner_type = em28xx_i2c_hash[i].tuner; - em28xx_errdev("Your board has no unique USB ID.\n"); - em28xx_errdev("A hint were successfully done, " - "based on i2c devicelist hash.\n"); - em28xx_errdev("This method is not 100%% failproof.\n"); - em28xx_errdev("If the board were missdetected, " - "please email this log to:\n"); - em28xx_errdev("\tV4L Mailing List " - " <linux-media@vger.kernel.org>\n"); - em28xx_errdev("Board detected as %s\n", - em28xx_boards[dev->model].name); + pr_err("Your board has no unique USB ID.\n"); + pr_err("A hint were successfully done, based on i2c devicelist hash.\n"); + pr_err("This method is not 100%% failproof.\n"); + pr_err("If the board were missdetected, please email this log to:\n"); + pr_err("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); + pr_err("Board detected as %s\n", + em28xx_boards[dev->model].name); return 0; } } - em28xx_errdev("Your board has no unique USB ID and thus need a " - "hint to be detected.\n"); - em28xx_errdev("You may try to use card=<n> insmod option to " - "workaround that.\n"); - em28xx_errdev("Please send an email with this log to:\n"); - em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); - em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); - em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); - - em28xx_errdev("Here is a list of valid choices for the card=<n>" - " insmod option:\n"); + pr_err("Your board has no unique USB ID and thus need a hint to be detected.\n"); + pr_err("You may try to use card=<n> insmod option to workaround that.\n"); + pr_err("Please send an email with this log to:\n"); + pr_err("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); + pr_err("Board eeprom hash is 0x%08lx\n", dev->hash); + pr_err("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); + + pr_err("Here is a list of valid choices for the card=<n> insmod option:\n"); for (i = 0; i < em28xx_bcount; i++) { - em28xx_errdev(" card=%d -> %s\n", - i, em28xx_boards[i].name); + pr_err(" card=%d -> %s\n", i, em28xx_boards[i].name); } return -1; } @@ -2925,7 +2915,7 @@ static void em28xx_card_setup(struct em28xx *dev) * hash identities which has not been determined as yet. */ if (em28xx_hint_board(dev) < 0) - em28xx_errdev("Board not discovered\n"); + pr_err("Board not discovered\n"); else { em28xx_set_model(dev); em28xx_pre_card_setup(dev); @@ -2935,8 +2925,8 @@ static void em28xx_card_setup(struct em28xx *dev) em28xx_set_model(dev); } - em28xx_info("Identified as %s (card=%d)\n", - dev->board.name, dev->model); + pr_info("Identified as %s (card=%d)\n", + dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; @@ -3034,12 +3024,10 @@ static void em28xx_card_setup(struct em28xx *dev) } if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { - em28xx_errdev("\n\n"); - em28xx_errdev("The support for this board weren't " - "valid yet.\n"); - em28xx_errdev("Please send a report of having this working\n"); - em28xx_errdev("not to V4L mailing list (and/or to other " - "addresses)\n\n"); + pr_err("\n\n"); + pr_err("The support for this board weren't valid yet.\n"); + pr_err("Please send a report of having this working\n"); + pr_err("not to V4L mailing list (and/or to other addresses)\n\n"); } /* Free eeprom data memory */ @@ -3222,7 +3210,7 @@ void em28xx_free_device(struct kref *ref) { struct em28xx *dev = kref_to_dev(ref); - em28xx_info("Freeing device\n"); + pr_info("Freeing device\n"); if (!dev->disconnected) em28xx_release_resources(dev); @@ -3328,14 +3316,12 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, dev->eeprom_addrwidth_16bit = 1; break; default: - printk(KERN_INFO DRIVER_NAME - ": unknown em28xx chip ID (%d)\n", dev->chip_id); + pr_info("unknown em28xx chip ID (%d)\n", dev->chip_id); } } if (chip_name != default_chip_name) - printk(KERN_INFO DRIVER_NAME - ": chip ID is %s\n", chip_name); + pr_info("chip ID is %s\n", chip_name); /* * For em2820/em2710, the name may change latter, after checking @@ -3360,9 +3346,8 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, /* Resets I2C speed */ retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); if (retval < 0) { - em28xx_errdev("%s: em28xx_write_reg failed!" - " retval [%d]\n", - __func__, retval); + pr_err("%s: em28xx_write_reg failed! retval [%d]\n", + __func__, retval); return retval; } } @@ -3375,8 +3360,8 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, else retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { - em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", - __func__, retval); + pr_err("%s: em28xx_i2c_register bus 0 - error [%d]!\n", + __func__, retval); return retval; } @@ -3389,8 +3374,8 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, retval = em28xx_i2c_register(dev, 1, EM28XX_I2C_ALGO_EM28XX); if (retval < 0) { - em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", - __func__, retval); + pr_err("%s: em28xx_i2c_register bus 1 - error [%d]!\n", + __func__, retval); em28xx_i2c_unregister(dev, 0); @@ -3429,7 +3414,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); if (nr >= EM28XX_MAXBOARDS) { /* No free device slots */ - printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", + pr_err("Driver supports up to %i em28xx boards.\n", EM28XX_MAXBOARDS); retval = -ENOMEM; goto err_no_slot; @@ -3438,8 +3423,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* Don't register audio interfaces */ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { - em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " - "interface %i, class %i\n", + pr_err("audio device (%04x:%04x): interface %i, class %i\n", le16_to_cpu(udev->descriptor.idVendor), le16_to_cpu(udev->descriptor.idProduct), ifnum, @@ -3452,7 +3436,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - em28xx_err(DRIVER_NAME ": out of memory!\n"); retval = -ENOMEM; goto err; } @@ -3462,7 +3445,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * interface->num_altsetting, GFP_KERNEL); if (dev->alt_max_pkt_size_isoc == NULL) { - em28xx_errdev("out of memory!\n"); kfree(dev); retval = -ENOMEM; goto err; @@ -3501,8 +3483,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (usb_endpoint_xfer_isoc(e)) { has_vendor_audio = true; } else { - printk(KERN_INFO DRIVER_NAME - ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); + pr_err("error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); } break; case 0x84: @@ -3575,9 +3556,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, speed = "unknown"; } - printk(KERN_INFO DRIVER_NAME - ": New device %s %s @ %s Mbps " - "(%04x:%04x, interface %d, class %d)\n", + pr_info("New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", udev->manufacturer ? udev->manufacturer : "", udev->product ? udev->product : "", speed, @@ -3592,9 +3571,8 @@ static int em28xx_usb_probe(struct usb_interface *interface, * not enough even for most Digital TV streams. */ if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { - printk(DRIVER_NAME ": Device initialization failed.\n"); - printk(DRIVER_NAME ": Device must be connected to a high-speed" - " USB 2.0 port.\n"); + pr_err("Device initialization failed.\n"); + pr_err("Device must be connected to a high-speed USB 2.0 port.\n"); retval = -ENODEV; goto err_free; } @@ -3607,8 +3585,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev->ifnum = ifnum; if (has_vendor_audio) { - printk(KERN_INFO DRIVER_NAME ": Audio interface %i found %s\n", - ifnum, "(Vendor Class)"); + pr_info("Audio interface %i found (Vendor Class)\n", ifnum); dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; } /* Checks if audio is provided by a USB Audio Class interface */ @@ -3617,25 +3594,23 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { if (has_vendor_audio) - em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n" - "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); + pr_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n" + "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; break; } } if (has_video) - printk(KERN_INFO DRIVER_NAME - ": Video interface %i found:%s%s\n", - ifnum, - dev->analog_ep_bulk ? " bulk" : "", - dev->analog_ep_isoc ? " isoc" : ""); + pr_info("Video interface %i found:%s%s\n", + ifnum, + dev->analog_ep_bulk ? " bulk" : "", + dev->analog_ep_isoc ? " isoc" : ""); if (has_dvb) - printk(KERN_INFO DRIVER_NAME - ": DVB interface %i found:%s%s\n", - ifnum, - dev->dvb_ep_bulk ? " bulk" : "", - dev->dvb_ep_isoc ? " isoc" : ""); + pr_info("DVB interface %i found:%s%s\n", + ifnum, + dev->dvb_ep_bulk ? " bulk" : "", + dev->dvb_ep_isoc ? " isoc" : ""); dev->num_alt = interface->num_altsetting; @@ -3664,8 +3639,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* Disable V4L2 if the device doesn't have a decoder */ if (has_video && dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) { - printk(DRIVER_NAME - ": Currently, V4L2 is not supported on this model\n"); + pr_err("Currently, V4L2 is not supported on this model\n"); has_video = false; dev->has_video = false; } @@ -3674,14 +3648,14 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (has_video) { if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) dev->analog_xfer_bulk = 1; - em28xx_info("analog set to %s mode.\n", - dev->analog_xfer_bulk ? "bulk" : "isoc"); + pr_info("analog set to %s mode.\n", + dev->analog_xfer_bulk ? "bulk" : "isoc"); } if (has_dvb) { if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) dev->dvb_xfer_bulk = 1; - em28xx_info("dvb set to %s mode.\n", - dev->dvb_xfer_bulk ? "bulk" : "isoc"); + pr_info("dvb set to %s mode.\n", + dev->dvb_xfer_bulk ? "bulk" : "isoc"); } kref_init(&dev->ref); @@ -3728,7 +3702,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) dev->disconnected = 1; - em28xx_info("Disconnecting %s\n", dev->name); + pr_info("Disconnecting %s\n", dev->name); flush_request_modules(dev); diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c index eebd5d7088d0..a413ff7c30d7 100644 --- a/drivers/media/usb/em28xx/em28xx-core.c +++ b/drivers/media/usb/em28xx/em28xx-core.c @@ -22,6 +22,8 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include "em28xx.h" + #include <linux/init.h> #include <linux/jiffies.h> #include <linux/list.h> @@ -32,8 +34,6 @@ #include <sound/ac97_codec.h> #include <media/v4l2-common.h> -#include "em28xx.h" - #define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \ "Markus Rechberger <mrechberger@gmail.com>, " \ "Mauro Carvalho Chehab <mchehab@infradead.org>, " \ @@ -48,12 +48,12 @@ MODULE_VERSION(EM28XX_VERSION); static unsigned int core_debug; module_param(core_debug, int, 0644); -MODULE_PARM_DESC(core_debug, "enable debug messages [core]"); +MODULE_PARM_DESC(core_debug, "enable debug messages [core and isoc]"); #define em28xx_coredbg(fmt, arg...) do {\ if (core_debug) \ - printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __func__ , ##arg); } while (0) + printk(KERN_DEBUG pr_fmt("core: %s: " fmt), \ + __func__, ##arg); } while (0) static unsigned int reg_debug; module_param(reg_debug, int, 0644); @@ -61,14 +61,14 @@ MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]"); #define em28xx_regdbg(fmt, arg...) do {\ if (reg_debug) \ - printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __func__ , ##arg); } while (0) + printk(KERN_DEBUG pr_fmt("reg: %s: " fmt), \ + __func__, ##arg); } while (0) /* FIXME */ #define em28xx_isocdbg(fmt, arg...) do {\ if (core_debug) \ - printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __func__ , ##arg); } while (0) + printk(KERN_DEBUG pr_fmt("isoc: %s: " fmt), \ + __func__, ##arg); } while (0) /* * em28xx_read_reg_req() @@ -87,8 +87,8 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, return -EINVAL; if (reg_debug) { - printk(KERN_DEBUG "(pipe 0x%08x): " - "IN: %02x %02x %02x %02x %02x %02x %02x %02x ", + printk(KERN_DEBUG + "(pipe 0x%08x): IN: %02x %02x %02x %02x %02x %02x %02x %02x ", pipe, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, req, 0, 0, @@ -102,7 +102,7 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, 0x0000, reg, dev->urb_buf, len, HZ); if (ret < 0) { if (reg_debug) - printk(" failed!\n"); + pr_cont(" failed!\n"); mutex_unlock(&dev->ctrl_urb_lock); return usb_translate_errors(ret); } @@ -115,10 +115,10 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, if (reg_debug) { int byte; - printk("<<<"); + pr_cont("<<<"); for (byte = 0; byte < len; byte++) - printk(" %02x", (unsigned char)buf[byte]); - printk("\n"); + pr_cont(" %02x", (unsigned char)buf[byte]); + pr_cont("\n"); } return ret; @@ -165,8 +165,8 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, if (reg_debug) { int byte; - printk(KERN_DEBUG "(pipe 0x%08x): " - "OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>", + printk(KERN_DEBUG + "(pipe 0x%08x): OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>", pipe, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, req, 0, 0, @@ -174,8 +174,8 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, len & 0xff, len >> 8); for (byte = 0; byte < len; byte++) - printk(" %02x", (unsigned char)buf[byte]); - printk("\n"); + pr_cont(" %02x", (unsigned char)buf[byte]); + pr_cont("\n"); } mutex_lock(&dev->ctrl_urb_lock); @@ -267,7 +267,7 @@ static int em28xx_is_ac97_ready(struct em28xx *dev) msleep(5); } - em28xx_warn("AC97 command still being executed: not handled properly!\n"); + pr_warn("AC97 command still being executed: not handled properly!\n"); return -EBUSY; } @@ -360,7 +360,7 @@ static int set_ac97_input(struct em28xx *dev) ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000); if (ret < 0) - em28xx_warn("couldn't setup AC97 register %d\n", + pr_warn("couldn't setup AC97 register %d\n", inputs[i].reg); } return 0; @@ -444,7 +444,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) for (i = 0; i < ARRAY_SIZE(outputs); i++) { ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000); if (ret < 0) - em28xx_warn("couldn't setup AC97 register %d\n", + pr_warn("couldn't setup AC97 register %d\n", outputs[i].reg); } } @@ -482,7 +482,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) ret = em28xx_write_ac97(dev, outputs[i].reg, vol); if (ret < 0) - em28xx_warn("couldn't setup AC97 register %d\n", + pr_warn("couldn't setup AC97 register %d\n", outputs[i].reg); } @@ -519,7 +519,7 @@ int em28xx_audio_setup(struct em28xx *dev) /* See how this device is configured */ cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG); - em28xx_info("Config register raw data: 0x%02x\n", cfg); + pr_info("Config register raw data: 0x%02x\n", cfg); if (cfg < 0) { /* Register read error */ /* Be conservative */ dev->int_audio_type = EM28XX_INT_AUDIO_AC97; @@ -540,8 +540,8 @@ int em28xx_audio_setup(struct em28xx *dev) i2s_samplerates = 5; else i2s_samplerates = 3; - em28xx_info("I2S Audio (%d sample rate(s))\n", - i2s_samplerates); + pr_info("I2S Audio (%d sample rate(s))\n", + i2s_samplerates); /* Skip the code that does AC97 vendor detection */ dev->audio_mode.ac97 = EM28XX_NO_AC97; goto init_audio; @@ -558,7 +558,7 @@ int em28xx_audio_setup(struct em28xx *dev) * Note: (some) em2800 devices without eeprom reports 0x91 on * CHIPCFG register, even not having an AC97 chip */ - em28xx_warn("AC97 chip type couldn't be determined\n"); + pr_warn("AC97 chip type couldn't be determined\n"); dev->audio_mode.ac97 = EM28XX_NO_AC97; if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) dev->usb_audio_type = EM28XX_USB_AUDIO_NONE; @@ -571,13 +571,13 @@ int em28xx_audio_setup(struct em28xx *dev) goto init_audio; vid = vid1 << 16 | vid2; - em28xx_warn("AC97 vendor ID = 0x%08x\n", vid); + pr_warn("AC97 vendor ID = 0x%08x\n", vid); feat = em28xx_read_ac97(dev, AC97_RESET); if (feat < 0) goto init_audio; - em28xx_warn("AC97 features = 0x%04x\n", feat); + pr_warn("AC97 features = 0x%04x\n", feat); /* Try to identify what audio processor we have */ if (((vid == 0xffffffff) || (vid == 0x83847650)) && (feat == 0x6a90)) @@ -589,17 +589,17 @@ init_audio: /* Reports detected AC97 processor */ switch (dev->audio_mode.ac97) { case EM28XX_NO_AC97: - em28xx_info("No AC97 audio processor\n"); + pr_info("No AC97 audio processor\n"); break; case EM28XX_AC97_EM202: - em28xx_info("Empia 202 AC97 audio processor detected\n"); + pr_info("Empia 202 AC97 audio processor detected\n"); break; case EM28XX_AC97_SIGMATEL: - em28xx_info("Sigmatel audio processor detected (stac 97%02x)\n", - vid & 0xff); + pr_info("Sigmatel audio processor detected (stac 97%02x)\n", + vid & 0xff); break; case EM28XX_AC97_OTHER: - em28xx_warn("Unknown AC97 audio processor detected!\n"); + pr_warn("Unknown AC97 audio processor detected!\n"); break; default: break; @@ -883,21 +883,21 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk, if (mode == EM28XX_DIGITAL_MODE) { if ((xfer_bulk && !dev->dvb_ep_bulk) || (!xfer_bulk && !dev->dvb_ep_isoc)) { - em28xx_errdev("no endpoint for DVB mode and transfer type %d\n", - xfer_bulk > 0); + pr_err("no endpoint for DVB mode and transfer type %d\n", + xfer_bulk > 0); return -EINVAL; } usb_bufs = &dev->usb_ctl.digital_bufs; } else if (mode == EM28XX_ANALOG_MODE) { if ((xfer_bulk && !dev->analog_ep_bulk) || (!xfer_bulk && !dev->analog_ep_isoc)) { - em28xx_errdev("no endpoint for analog mode and transfer type %d\n", - xfer_bulk > 0); + pr_err("no endpoint for analog mode and transfer type %d\n", + xfer_bulk > 0); return -EINVAL; } usb_bufs = &dev->usb_ctl.analog_bufs; } else { - em28xx_errdev("invalid mode selected\n"); + pr_err("invalid mode selected\n"); return -EINVAL; } @@ -907,15 +907,12 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk, usb_bufs->num_bufs = num_bufs; usb_bufs->urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); - if (!usb_bufs->urb) { - em28xx_errdev("cannot alloc memory for usb buffers\n"); + if (!usb_bufs->urb) return -ENOMEM; - } usb_bufs->transfer_buffer = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); if (!usb_bufs->transfer_buffer) { - em28xx_errdev("cannot allocate memory for usb transfer\n"); kfree(usb_bufs->urb); return -ENOMEM; } @@ -942,10 +939,9 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk, usb_bufs->transfer_buffer[i] = usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, &urb->transfer_dma); if (!usb_bufs->transfer_buffer[i]) { - em28xx_err("unable to allocate %i bytes for transfer" - " buffer %i%s\n", - sb_size, i, - in_interrupt() ? " while in int" : ""); + pr_err("unable to allocate %i bytes for transfer buffer %i%s\n", + sb_size, i, + in_interrupt() ? " while in int" : ""); em28xx_uninit_usb_xfer(dev, mode); return -ENOMEM; } @@ -1025,8 +1021,8 @@ int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode, if (xfer_bulk) { rc = usb_clear_halt(dev->udev, usb_bufs->urb[0]->pipe); if (rc < 0) { - em28xx_err("failed to clear USB bulk endpoint stall/halt condition (error=%i)\n", - rc); + pr_err("failed to clear USB bulk endpoint stall/halt condition (error=%i)\n", + rc); em28xx_uninit_usb_xfer(dev, mode); return rc; } @@ -1041,8 +1037,7 @@ int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode, for (i = 0; i < usb_bufs->num_bufs; i++) { rc = usb_submit_urb(usb_bufs->urb[i], GFP_ATOMIC); if (rc) { - em28xx_err("submit of urb %i failed (error=%i)\n", i, - rc); + pr_err("submit of urb %i failed (error=%i)\n", i, rc); em28xx_uninit_usb_xfer(dev, mode); return rc; } @@ -1075,7 +1070,7 @@ int em28xx_register_extension(struct em28xx_ops *ops) ops->init(dev); } mutex_unlock(&em28xx_devlist_mutex); - printk(KERN_INFO "em28xx: Registered (%s) extension\n", ops->name); + pr_info("em28xx: Registered (%s) extension\n", ops->name); return 0; } EXPORT_SYMBOL(em28xx_register_extension); @@ -1090,7 +1085,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) } list_del(&ops->next); mutex_unlock(&em28xx_devlist_mutex); - printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); + pr_info("Em28xx: Removed (%s) extension\n", ops->name); } EXPORT_SYMBOL(em28xx_unregister_extension); @@ -1124,7 +1119,7 @@ int em28xx_suspend_extension(struct em28xx *dev) { const struct em28xx_ops *ops = NULL; - em28xx_info("Suspending extensions\n"); + pr_info("Suspending extensions\n"); mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(ops, &em28xx_extension_devlist, next) { if (ops->suspend) @@ -1138,7 +1133,7 @@ int em28xx_resume_extension(struct em28xx *dev) { const struct em28xx_ops *ops = NULL; - em28xx_info("Resuming extensions\n"); + pr_info("Resuming extensions\n"); mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(ops, &em28xx_extension_devlist, next) { if (ops->resume) diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c index 8cedef0daae4..6feb0e416eac 100644 --- a/drivers/media/usb/em28xx/em28xx-dvb.c +++ b/drivers/media/usb/em28xx/em28xx-dvb.c @@ -21,11 +21,12 @@ the Free Software Foundation; either version 2 of the License. */ +#include "em28xx.h" + #include <linux/kernel.h> #include <linux/slab.h> #include <linux/usb.h> -#include "em28xx.h" #include <media/v4l2-common.h> #include <dvb_demux.h> #include <dvb_net.h> @@ -734,7 +735,7 @@ static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe) ret = gpio_request_one(dvb->lna_gpio, flags, NULL); if (ret) - em28xx_errdev("gpio request failed %d\n", ret); + pr_err("gpio request failed %d\n", ret); else gpio_free(dvb->lna_gpio); @@ -934,20 +935,19 @@ static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev) cfg.ctrl = &ctl; if (!dev->dvb->fe[0]) { - em28xx_errdev("/2: dvb frontend not attached. " - "Can't attach xc3028\n"); + pr_err("dvb frontend not attached. Can't attach xc3028\n"); return -EINVAL; } fe = dvb_attach(xc2028_attach, dev->dvb->fe[0], &cfg); if (!fe) { - em28xx_errdev("/2: xc3028 attach failed\n"); + pr_err("xc3028 attach failed\n"); dvb_frontend_detach(dev->dvb->fe[0]); dev->dvb->fe[0] = NULL; return -EINVAL; } - em28xx_info("%s/2: xc3028 attached\n", dev->name); + pr_info("xc3028 attached\n"); return 0; } @@ -966,8 +966,8 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, result = dvb_register_adapter(&dvb->adapter, dev->name, module, device, adapter_nr); if (result < 0) { - printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n", - dev->name, result); + pr_warn("dvb_register_adapter failed (errno = %d)\n", + result); goto fail_adapter; } #ifdef CONFIG_MEDIA_CONTROLLER_DVB @@ -984,8 +984,8 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, /* register frontend */ result = dvb_register_frontend(&dvb->adapter, dvb->fe[0]); if (result < 0) { - printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n", - dev->name, result); + pr_warn("dvb_register_frontend failed (errno = %d)\n", + result); goto fail_frontend0; } @@ -993,8 +993,8 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, if (dvb->fe[1]) { result = dvb_register_frontend(&dvb->adapter, dvb->fe[1]); if (result < 0) { - printk(KERN_WARNING "%s: 2nd dvb_register_frontend failed (errno = %d)\n", - dev->name, result); + pr_warn("2nd dvb_register_frontend failed (errno = %d)\n", + result); goto fail_frontend1; } } @@ -1011,8 +1011,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, result = dvb_dmx_init(&dvb->demux); if (result < 0) { - printk(KERN_WARNING "%s: dvb_dmx_init failed (errno = %d)\n", - dev->name, result); + pr_warn("dvb_dmx_init failed (errno = %d)\n", result); goto fail_dmx; } @@ -1021,31 +1020,29 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, dvb->dmxdev.capabilities = 0; result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); if (result < 0) { - printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n", - dev->name, result); + pr_warn("dvb_dmxdev_init failed (errno = %d)\n", result); goto fail_dmxdev; } dvb->fe_hw.source = DMX_FRONTEND_0; result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); if (result < 0) { - printk(KERN_WARNING "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", - dev->name, result); + pr_warn("add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", + result); goto fail_fe_hw; } dvb->fe_mem.source = DMX_MEMORY_FE; result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); if (result < 0) { - printk(KERN_WARNING "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", - dev->name, result); + pr_warn("add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", + result); goto fail_fe_mem; } result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); if (result < 0) { - printk(KERN_WARNING "%s: connect_frontend failed (errno = %d)\n", - dev->name, result); + pr_warn("connect_frontend failed (errno = %d)\n", result); goto fail_fe_conn; } @@ -1117,13 +1114,12 @@ static int em28xx_dvb_init(struct em28xx *dev) return 0; } - em28xx_info("Binding DVB extension\n"); + pr_info("Binding DVB extension\n"); dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL); - if (dvb == NULL) { - em28xx_info("em28xx_dvb: memory allocation failed\n"); + if (!dvb) return -ENOMEM; - } + dev->dvb = dvb; dvb->fe[0] = dvb->fe[1] = NULL; @@ -1142,7 +1138,7 @@ static int em28xx_dvb_init(struct em28xx *dev) EM28XX_DVB_NUM_ISOC_PACKETS); } if (result) { - em28xx_errdev("em28xx_dvb: failed to pre-allocate USB transfer buffers for DVB.\n"); + pr_err("em28xx_dvb: failed to pre-allocate USB transfer buffers for DVB.\n"); kfree(dvb); dev->dvb = NULL; return result; @@ -1321,7 +1317,7 @@ static int em28xx_dvb_init(struct em28xx *dev) result = gpio_request_one(dvb->lna_gpio, GPIOF_OUT_INIT_LOW, NULL); if (result) - em28xx_errdev("gpio request failed %d\n", + pr_err("gpio request failed %d\n", result); else gpio_free(dvb->lna_gpio); @@ -1937,12 +1933,11 @@ static int em28xx_dvb_init(struct em28xx *dev) } break; default: - em28xx_errdev("/2: The frontend of your DVB/ATSC card" - " isn't supported yet\n"); + pr_err("The frontend of your DVB/ATSC card isn't supported yet\n"); break; } if (NULL == dvb->fe[0]) { - em28xx_errdev("/2: frontend initialization failed\n"); + pr_err("frontend initialization failed\n"); result = -EINVAL; goto out_free; } @@ -1957,7 +1952,7 @@ static int em28xx_dvb_init(struct em28xx *dev) if (result < 0) goto out_free; - em28xx_info("DVB extension successfully initialized\n"); + pr_info("DVB extension successfully initialized\n"); kref_get(&dev->ref); @@ -1997,7 +1992,7 @@ static int em28xx_dvb_fini(struct em28xx *dev) if (!dev->dvb) return 0; - em28xx_info("Closing DVB extension\n"); + pr_info("Closing DVB extension\n"); dvb = dev->dvb; @@ -2055,17 +2050,17 @@ static int em28xx_dvb_suspend(struct em28xx *dev) if (!dev->board.has_dvb) return 0; - em28xx_info("Suspending DVB extension\n"); + pr_info("Suspending DVB extension\n"); if (dev->dvb) { struct em28xx_dvb *dvb = dev->dvb; if (dvb->fe[0]) { ret = dvb_frontend_suspend(dvb->fe[0]); - em28xx_info("fe0 suspend %d\n", ret); + pr_info("fe0 suspend %d\n", ret); } if (dvb->fe[1]) { dvb_frontend_suspend(dvb->fe[1]); - em28xx_info("fe1 suspend %d\n", ret); + pr_info("fe1 suspend %d\n", ret); } } @@ -2082,18 +2077,18 @@ static int em28xx_dvb_resume(struct em28xx *dev) if (!dev->board.has_dvb) return 0; - em28xx_info("Resuming DVB extension\n"); + pr_info("Resuming DVB extension\n"); if (dev->dvb) { struct em28xx_dvb *dvb = dev->dvb; if (dvb->fe[0]) { ret = dvb_frontend_resume(dvb->fe[0]); - em28xx_info("fe0 resume %d\n", ret); + pr_info("fe0 resume %d\n", ret); } if (dvb->fe[1]) { ret = dvb_frontend_resume(dvb->fe[1]); - em28xx_info("fe1 resume %d\n", ret); + pr_info("fe1 resume %d\n", ret); } } diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c index 8b690ac908a4..b7a5b4c5ceff 100644 --- a/drivers/media/usb/em28xx/em28xx-i2c.c +++ b/drivers/media/usb/em28xx/em28xx-i2c.c @@ -22,13 +22,14 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include "em28xx.h" + #include <linux/module.h> #include <linux/kernel.h> #include <linux/usb.h> #include <linux/i2c.h> #include <linux/jiffies.h> -#include "em28xx.h" #include "tuner-xc2028.h" #include <media/v4l2-common.h> #include <media/tuner.h> @@ -70,7 +71,7 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) /* trigger write */ ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len); if (ret != 2 + len) { - em28xx_warn("failed to trigger write to i2c address 0x%x (error=%i)\n", + pr_warn("failed to trigger write to i2c address 0x%x (error=%i)\n", addr, ret); return (ret < 0) ? ret : -EIO; } @@ -81,19 +82,19 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) return len; if (ret == 0x94 + len - 1) { if (i2c_debug == 1) - em28xx_warn("R05 returned 0x%02x: I2C ACK error\n", - ret); + pr_warn("R05 returned 0x%02x: I2C ACK error\n", + ret); return -ENXIO; } if (ret < 0) { - em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n", - ret); + pr_warn("failed to get i2c transfer status from bridge register (error=%i)\n", + ret); return ret; } msleep(5); } if (i2c_debug) - em28xx_warn("write to i2c device at 0x%x timed out\n", addr); + pr_warn("write to i2c device at 0x%x timed out\n", addr); return -ETIMEDOUT; } @@ -116,8 +117,8 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) buf2[0] = addr; ret = dev->em28xx_write_regs(dev, 0x04, buf2, 2); if (ret != 2) { - em28xx_warn("failed to trigger read from i2c address 0x%x (error=%i)\n", - addr, ret); + pr_warn("failed to trigger read from i2c address 0x%x (error=%i)\n", + addr, ret); return (ret < 0) ? ret : -EIO; } @@ -128,28 +129,28 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len) break; if (ret == 0x94 + len - 1) { if (i2c_debug == 1) - em28xx_warn("R05 returned 0x%02x: I2C ACK error\n", - ret); + pr_warn("R05 returned 0x%02x: I2C ACK error\n", + ret); return -ENXIO; } if (ret < 0) { - em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n", - ret); + pr_warn("failed to get i2c transfer status from bridge register (error=%i)\n", + ret); return ret; } msleep(5); } if (ret != 0x84 + len - 1) { if (i2c_debug) - em28xx_warn("read from i2c device at 0x%x timed out\n", - addr); + pr_warn("read from i2c device at 0x%x timed out\n", + addr); } /* get the received message */ ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len); if (ret != len) { - em28xx_warn("reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n", - addr, ret); + pr_warn("reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n", + addr, ret); return (ret < 0) ? ret : -EIO; } for (i = 0; i < len; i++) @@ -193,12 +194,12 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len); if (ret != len) { if (ret < 0) { - em28xx_warn("writing to i2c device at 0x%x failed (error=%i)\n", - addr, ret); + pr_warn("writing to i2c device at 0x%x failed (error=%i)\n", + addr, ret); return ret; } else { - em28xx_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", - len, addr, ret); + pr_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", + len, addr, ret); return -EIO; } } @@ -210,13 +211,13 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, return len; if (ret == 0x10) { if (i2c_debug == 1) - em28xx_warn("I2C ACK error on writing to addr 0x%02x\n", - addr); + pr_warn("I2C ACK error on writing to addr 0x%02x\n", + addr); return -ENXIO; } if (ret < 0) { - em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n", - ret); + pr_warn("failed to get i2c transfer status from bridge register (error=%i)\n", + ret); return ret; } msleep(5); @@ -230,13 +231,13 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, if (ret == 0x02 || ret == 0x04) { /* NOTE: these errors seem to be related to clock stretching */ if (i2c_debug) - em28xx_warn("write to i2c device at 0x%x timed out (status=%i)\n", - addr, ret); + pr_warn("write to i2c device at 0x%x timed out (status=%i)\n", + addr, ret); return -ETIMEDOUT; } - em28xx_warn("write to i2c device at 0x%x failed with unknown error (status=%i)\n", - addr, ret); + pr_warn("write to i2c device at 0x%x failed with unknown error (status=%i)\n", + addr, ret); return -EIO; } @@ -258,8 +259,8 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) /* Read data from i2c device */ ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len); if (ret < 0) { - em28xx_warn("reading from i2c device at 0x%x failed (error=%i)\n", - addr, ret); + pr_warn("reading from i2c device at 0x%x failed (error=%i)\n", + addr, ret); return ret; } /* @@ -276,27 +277,27 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len) if (ret == 0) /* success */ return len; if (ret < 0) { - em28xx_warn("failed to get i2c transfer status from bridge register (error=%i)\n", - ret); + pr_warn("failed to get i2c transfer status from bridge register (error=%i)\n", + ret); return ret; } if (ret == 0x10) { if (i2c_debug == 1) - em28xx_warn("I2C ACK error on writing to addr 0x%02x\n", - addr); + pr_warn("I2C ACK error on writing to addr 0x%02x\n", + addr); return -ENXIO; } if (ret == 0x02 || ret == 0x04) { /* NOTE: these errors seem to be related to clock stretching */ if (i2c_debug) - em28xx_warn("write to i2c device at 0x%x timed out (status=%i)\n", - addr, ret); + pr_warn("write to i2c device at 0x%x timed out (status=%i)\n", + addr, ret); return -ETIMEDOUT; } - em28xx_warn("write to i2c device at 0x%x failed with unknown error (status=%i)\n", - addr, ret); + pr_warn("write to i2c device at 0x%x failed with unknown error (status=%i)\n", + addr, ret); return -EIO; } @@ -335,12 +336,12 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, ret = dev->em28xx_write_regs_req(dev, 0x06, addr, buf, len); if (ret != len) { if (ret < 0) { - em28xx_warn("writing to i2c device at 0x%x failed (error=%i)\n", - addr, ret); + pr_warn("writing to i2c device at 0x%x failed (error=%i)\n", + addr, ret); return ret; } else { - em28xx_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", - len, addr, ret); + pr_warn("%i bytes write to i2c device at 0x%x requested, but %i bytes written\n", + len, addr, ret); return -EIO; } } @@ -354,8 +355,8 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf, return len; else if (ret > 0) { if (i2c_debug == 1) - em28xx_warn("Bus B R08 returned 0x%02x: I2C ACK error\n", - ret); + pr_warn("Bus B R08 returned 0x%02x: I2C ACK error\n", + ret); return -ENXIO; } @@ -386,8 +387,8 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, /* Read value */ ret = dev->em28xx_read_reg_req_len(dev, 0x06, addr, buf, len); if (ret < 0) { - em28xx_warn("reading from i2c device at 0x%x failed (error=%i)\n", - addr, ret); + pr_warn("reading from i2c device at 0x%x failed (error=%i)\n", + addr, ret); return ret; } /* @@ -409,8 +410,8 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, return len; else if (ret > 0) { if (i2c_debug == 1) - em28xx_warn("Bus B R08 returned 0x%02x: I2C ACK error\n", - ret); + pr_warn("Bus B R08 returned 0x%02x: I2C ACK error\n", + ret); return -ENXIO; } @@ -543,11 +544,11 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, if (rc < 0) { if (rc == -ENXIO) { if (i2c_debug > 1) - printk(KERN_CONT " no device\n"); + pr_cont(" no device\n"); rc = -ENODEV; } else { if (i2c_debug > 1) - printk(KERN_CONT " ERROR: %i\n", rc); + pr_cont(" ERROR: %i\n", rc); } rt_mutex_unlock(&dev->i2c_bus_lock); return rc; @@ -557,11 +558,11 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, rc = i2c_recv_bytes(i2c_bus, msgs[i]); if (i2c_debug > 1 && rc >= 0) - printk(KERN_CONT " %*ph", + pr_cont(" %*ph", msgs[i].len, msgs[i].buf); } else { if (i2c_debug > 1) - printk(KERN_CONT " %*ph", + pr_cont(" %*ph", msgs[i].len, msgs[i].buf); /* write bytes */ @@ -569,12 +570,12 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, } if (rc < 0) { if (i2c_debug > 1) - printk(KERN_CONT " ERROR: %i\n", rc); + pr_cont(" ERROR: %i\n", rc); rt_mutex_unlock(&dev->i2c_bus_lock); return rc; } if (i2c_debug > 1) - printk(KERN_CONT "\n"); + pr_cont("\n"); } rt_mutex_unlock(&dev->i2c_bus_lock); @@ -672,7 +673,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, /* Check if board has eeprom */ err = i2c_master_recv(&dev->i2c_client[bus], &buf, 0); if (err < 0) { - em28xx_info("board has no eeprom\n"); + pr_info("board has no eeprom\n"); return -ENODEV; } @@ -685,7 +686,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, dev->eeprom_addrwidth_16bit, len, data); if (err != len) { - em28xx_errdev("failed to read eeprom (err=%d)\n", err); + pr_err("failed to read eeprom (err=%d)\n", err); goto error; } @@ -695,7 +696,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, 16, 1, data, len, true); if (dev->eeprom_addrwidth_16bit) - em28xx_info("eeprom %06x: ... (skipped)\n", 256); + pr_info("eeprom %06x: ... (skipped)\n", 256); } if (dev->eeprom_addrwidth_16bit && @@ -707,11 +708,11 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, dev->hash = em28xx_hash_mem(data, len, 32); mc_start = (data[1] << 8) + 4; /* usually 0x0004 */ - em28xx_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n", - data[0], data[1], data[2], data[3], dev->hash); - em28xx_info("EEPROM info:\n"); - em28xx_info("\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n", - mc_start, data[2]); + pr_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n", + data[0], data[1], data[2], data[3], dev->hash); + pr_info("EEPROM info:\n"); + pr_info("\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n", + mc_start, data[2]); /* * boot configuration (address 0x0002): * [0] microcode download speed: 1 = 400 kHz; 0 = 100 kHz @@ -729,8 +730,8 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2, data); if (err != 2) { - em28xx_errdev("failed to read hardware configuration data from eeprom (err=%d)\n", - err); + pr_err("failed to read hardware configuration data from eeprom (err=%d)\n", + err); goto error; } @@ -747,8 +748,8 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, err = em28xx_i2c_read_block(dev, bus, hwconf_offset, 1, len, data); if (err != len) { - em28xx_errdev("failed to read hardware configuration data from eeprom (err=%d)\n", - err); + pr_err("failed to read hardware configuration data from eeprom (err=%d)\n", + err); goto error; } @@ -756,7 +757,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, /* NOTE: not all devices provide this type of dataset */ if (data[0] != 0x1a || data[1] != 0xeb || data[2] != 0x67 || data[3] != 0x95) { - em28xx_info("\tno hardware configuration dataset found in eeprom\n"); + pr_info("\tno hardware configuration dataset found in eeprom\n"); kfree(data); return 0; } @@ -767,11 +768,11 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, data[0] == 0x1a && data[1] == 0xeb && data[2] == 0x67 && data[3] == 0x95) { dev->hash = em28xx_hash_mem(data, len, 32); - em28xx_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n", - data[0], data[1], data[2], data[3], dev->hash); - em28xx_info("EEPROM info:\n"); + pr_info("EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n", + data[0], data[1], data[2], data[3], dev->hash); + pr_info("EEPROM info:\n"); } else { - em28xx_info("unknown eeprom format or eeprom corrupted !\n"); + pr_info("unknown eeprom format or eeprom corrupted !\n"); err = -ENODEV; goto error; } @@ -782,46 +783,46 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus, switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) { case 0: - em28xx_info("\tNo audio on board.\n"); + pr_info("\tNo audio on board.\n"); break; case 1: - em28xx_info("\tAC97 audio (5 sample rates)\n"); + pr_info("\tAC97 audio (5 sample rates)\n"); break; case 2: if (dev->chip_id < CHIP_ID_EM2860) - em28xx_info("\tI2S audio, sample rate=32k\n"); + pr_info("\tI2S audio, sample rate=32k\n"); else - em28xx_info("\tI2S audio, 3 sample rates\n"); + pr_info("\tI2S audio, 3 sample rates\n"); break; case 3: if (dev->chip_id < CHIP_ID_EM2860) - em28xx_info("\tI2S audio, 3 sample rates\n"); + pr_info("\tI2S audio, 3 sample rates\n"); else - em28xx_info("\tI2S audio, 5 sample rates\n"); + pr_info("\tI2S audio, 5 sample rates\n"); break; } if (le16_to_cpu(dev_config->chip_conf) & 1 << 3) - em28xx_info("\tUSB Remote wakeup capable\n"); + pr_info("\tUSB Remote wakeup capable\n"); if (le16_to_cpu(dev_config->chip_conf) & 1 << 2) - em28xx_info("\tUSB Self power capable\n"); + pr_info("\tUSB Self power capable\n"); switch (le16_to_cpu(dev_config->chip_conf) & 0x3) { case 0: - em28xx_info("\t500mA max power\n"); + pr_info("\t500mA max power\n"); break; case 1: - em28xx_info("\t400mA max power\n"); + pr_info("\t400mA max power\n"); break; case 2: - em28xx_info("\t300mA max power\n"); + pr_info("\t300mA max power\n"); break; case 3: - em28xx_info("\t200mA max power\n"); + pr_info("\t200mA max power\n"); break; } - em28xx_info("\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n", + pr_info("\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n", dev_config->string_idx_table, le16_to_cpu(dev_config->string1), le16_to_cpu(dev_config->string2), @@ -914,8 +915,8 @@ void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus) if (rc < 0) continue; i2c_devicelist[i] = i; - em28xx_info("found i2c device @ 0x%x on bus %d [%s]\n", - i << 1, bus, i2c_devs[i] ? i2c_devs[i] : "???"); + pr_info("found i2c device @ 0x%x on bus %d [%s]\n", + i << 1, bus, i2c_devs[i] ? i2c_devs[i] : "???"); } if (bus == dev->def_i2c_bus) @@ -949,8 +950,8 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus, retval = i2c_add_adapter(&dev->i2c_adap[bus]); if (retval < 0) { - em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n", - __func__, retval); + pr_err("%s: i2c_add_adapter failed! retval [%d]\n", + __func__, retval); return retval; } @@ -961,8 +962,8 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus, if (!bus) { retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len); if ((retval < 0) && (retval != -ENODEV)) { - em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n", - __func__, retval); + pr_err("%s: em28xx_i2_eeprom failed! retval [%d]\n", + __func__, retval); return retval; } diff --git a/drivers/media/usb/em28xx/em28xx-input.c b/drivers/media/usb/em28xx/em28xx-input.c index 4007356d991d..0e23e65eff15 100644 --- a/drivers/media/usb/em28xx/em28xx-input.c +++ b/drivers/media/usb/em28xx/em28xx-input.c @@ -21,6 +21,8 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include "em28xx.h" + #include <linux/module.h> #include <linux/init.h> #include <linux/delay.h> @@ -29,8 +31,6 @@ #include <linux/slab.h> #include <linux/bitrev.h> -#include "em28xx.h" - #define EM28XX_SNAPSHOT_KEY KEY_CAMERA #define EM28XX_BUTTONS_DEBOUNCED_QUERY_INTERVAL 500 /* [ms] */ #define EM28XX_BUTTONS_VOLATILE_QUERY_INTERVAL 100 /* [ms] */ @@ -458,7 +458,7 @@ static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type) case CHIP_ID_EM28178: return em2874_ir_change_protocol(rc_dev, rc_type); default: - printk("Unrecognized em28xx chip id 0x%02x: IR not supported\n", + pr_err("Unrecognized em28xx chip id 0x%02x: IR not supported\n", dev->chip_id); return -EINVAL; } @@ -567,7 +567,7 @@ static int em28xx_register_snapshot_button(struct em28xx *dev) struct input_dev *input_dev; int err; - em28xx_info("Registering snapshot button...\n"); + pr_info("Registering snapshot button...\n"); input_dev = input_allocate_device(); if (!input_dev) return -ENOMEM; @@ -591,7 +591,7 @@ static int em28xx_register_snapshot_button(struct em28xx *dev) err = input_register_device(input_dev); if (err) { - em28xx_errdev("input_register_device failed\n"); + pr_err("input_register_device failed\n"); input_free_device(input_dev); return err; } @@ -631,7 +631,7 @@ static void em28xx_init_buttons(struct em28xx *dev) } else if (button->role == EM28XX_BUTTON_ILLUMINATION) { /* Check sanity */ if (!em28xx_find_led(dev, EM28XX_LED_ILLUMINATION)) { - em28xx_errdev("BUG: illumination button defined, but no illumination LED.\n"); + pr_err("BUG: illumination button defined, but no illumination LED.\n"); goto next_button; } } @@ -667,7 +667,7 @@ static void em28xx_shutdown_buttons(struct em28xx *dev) dev->num_button_polling_addresses = 0; /* Deregister input devices */ if (dev->sbutton_input_dev != NULL) { - em28xx_info("Deregistering snapshot button\n"); + pr_info("Deregistering snapshot button\n"); input_unregister_device(dev->sbutton_input_dev); dev->sbutton_input_dev = NULL; } @@ -696,19 +696,18 @@ static int em28xx_ir_init(struct em28xx *dev) i2c_rc_dev_addr = em28xx_probe_i2c_ir(dev); if (!i2c_rc_dev_addr) { dev->board.has_ir_i2c = 0; - em28xx_warn("No i2c IR remote control device found.\n"); + pr_warn("No i2c IR remote control device found.\n"); return -ENODEV; } } if (dev->board.ir_codes == NULL && !dev->board.has_ir_i2c) { /* No remote control support */ - em28xx_warn("Remote control support is not available for " - "this card.\n"); + pr_warn("Remote control support is not available for this card.\n"); return 0; } - em28xx_info("Registering input extension\n"); + pr_info("Registering input extension\n"); ir = kzalloc(sizeof(*ir), GFP_KERNEL); if (!ir) @@ -811,7 +810,7 @@ static int em28xx_ir_init(struct em28xx *dev) if (err) goto error; - em28xx_info("Input extension successfully initalized\n"); + pr_info("Input extension successfully initalized\n"); return 0; @@ -832,7 +831,7 @@ static int em28xx_ir_fini(struct em28xx *dev) return 0; } - em28xx_info("Closing input extension\n"); + pr_info("Closing input extension\n"); em28xx_shutdown_buttons(dev); @@ -861,7 +860,7 @@ static int em28xx_ir_suspend(struct em28xx *dev) if (dev->is_audio_only) return 0; - em28xx_info("Suspending input extension\n"); + pr_info("Suspending input extension\n"); if (ir) cancel_delayed_work_sync(&ir->work); cancel_delayed_work_sync(&dev->buttons_query_work); @@ -878,7 +877,7 @@ static int em28xx_ir_resume(struct em28xx *dev) if (dev->is_audio_only) return 0; - em28xx_info("Resuming input extension\n"); + pr_info("Resuming input extension\n"); /* if suspend calls ir_raw_event_unregister(), the should call ir_raw_event_register() */ if (ir) diff --git a/drivers/media/usb/em28xx/em28xx-vbi.c b/drivers/media/usb/em28xx/em28xx-vbi.c index 836c6b53b16c..744b3300b153 100644 --- a/drivers/media/usb/em28xx/em28xx-vbi.c +++ b/drivers/media/usb/em28xx/em28xx-vbi.c @@ -21,12 +21,13 @@ 02110-1301, USA. */ +#include "em28xx.h" + #include <linux/kernel.h> #include <linux/module.h> #include <linux/hardirq.h> #include <linux/init.h> -#include "em28xx.h" #include "em28xx-v4l.h" /* ------------------------------------------------------------------ */ @@ -63,8 +64,8 @@ static int vbi_buffer_prepare(struct vb2_buffer *vb) size = v4l2->vbi_width * v4l2->vbi_height * 2; if (vb2_plane_size(vb, 0) < size) { - printk(KERN_INFO "%s data will not fit into plane (%lu < %lu)\n", - __func__, vb2_plane_size(vb, 0), size); + pr_info("%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), size); return -EINVAL; } vb2_set_plane_payload(vb, 0, size); diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index 1f7fa059eb34..8b5e13bbfb07 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -26,6 +26,8 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include "em28xx.h" + #include <linux/init.h> #include <linux/list.h> #include <linux/module.h> @@ -37,7 +39,6 @@ #include <linux/mutex.h> #include <linux/slab.h> -#include "em28xx.h" #include "em28xx-v4l.h" #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> @@ -65,16 +66,13 @@ MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint"); #define em28xx_videodbg(fmt, arg...) do {\ if (video_debug) \ - printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __func__ , ##arg); } while (0) + printk(KERN_DEBUG pr_fmt("video: %s: " fmt), \ + __func__, ##arg); } while (0) -#define em28xx_isocdbg(fmt, arg...) \ -do {\ - if (isoc_debug) { \ - printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __func__ , ##arg); \ - } \ - } while (0) +#define em28xx_isocdbg(fmt, arg...) do {\ + if (isoc_debug) \ + printk(KERN_DEBUG pr_fmt("isoc: %s: " fmt), \ + __func__, ##arg); } while (0) MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC " - v4l2 interface"); @@ -413,8 +411,8 @@ set_alt: dev->alt, dev->max_pkt_size); errCode = usb_set_interface(dev->udev, dev->ifnum, dev->alt); if (errCode < 0) { - em28xx_errdev("cannot change alternate number to %d (error=%i)\n", - dev->alt, errCode); + pr_err("cannot change alternate number to %d (error=%i)\n", + dev->alt, errCode); return errCode; } return 0; @@ -505,8 +503,7 @@ static void em28xx_copy_video(struct em28xx *dev, if ((char *)startwrite + lencopy > (char *)buf->vb_buf + buf->length) { - em28xx_isocdbg("Overflow of %zu bytes past buffer end" - "(2)\n", + em28xx_isocdbg("Overflow of %zu bytes past buffer end(2)\n", ((char *)startwrite + lencopy) - ((char *)buf->vb_buf + buf->length)); lencopy = remain = (char *)buf->vb_buf + buf->length - @@ -2048,8 +2045,8 @@ static int em28xx_v4l2_open(struct file *filp) ret = v4l2_fh_open(filp); if (ret) { - em28xx_errdev("%s: v4l2_fh_open() returned error %d\n", - __func__, ret); + pr_err("%s: v4l2_fh_open() returned error %d\n", + __func__, ret); mutex_unlock(&dev->lock); return ret; } @@ -2103,7 +2100,7 @@ static int em28xx_v4l2_fini(struct em28xx *dev) if (v4l2 == NULL) return 0; - em28xx_info("Closing video extension\n"); + pr_info("Closing video extension\n"); mutex_lock(&dev->lock); @@ -2114,18 +2111,18 @@ static int em28xx_v4l2_fini(struct em28xx *dev) em28xx_v4l2_media_release(dev); if (video_is_registered(&v4l2->radio_dev)) { - em28xx_info("V4L2 device %s deregistered\n", - video_device_node_name(&v4l2->radio_dev)); + pr_info("V4L2 device %s deregistered\n", + video_device_node_name(&v4l2->radio_dev)); video_unregister_device(&v4l2->radio_dev); } if (video_is_registered(&v4l2->vbi_dev)) { - em28xx_info("V4L2 device %s deregistered\n", - video_device_node_name(&v4l2->vbi_dev)); + pr_info("V4L2 device %s deregistered\n", + video_device_node_name(&v4l2->vbi_dev)); video_unregister_device(&v4l2->vbi_dev); } if (video_is_registered(&v4l2->vdev)) { - em28xx_info("V4L2 device %s deregistered\n", - video_device_node_name(&v4l2->vdev)); + pr_info("V4L2 device %s deregistered\n", + video_device_node_name(&v4l2->vdev)); video_unregister_device(&v4l2->vdev); } @@ -2154,7 +2151,7 @@ static int em28xx_v4l2_suspend(struct em28xx *dev) if (!dev->has_video) return 0; - em28xx_info("Suspending video extension\n"); + pr_info("Suspending video extension\n"); em28xx_stop_urbs(dev); return 0; } @@ -2167,7 +2164,7 @@ static int em28xx_v4l2_resume(struct em28xx *dev) if (!dev->has_video) return 0; - em28xx_info("Resuming video extension\n"); + pr_info("Resuming video extension\n"); /* what do we do here */ return 0; } @@ -2204,8 +2201,8 @@ static int em28xx_v4l2_close(struct file *filp) em28xx_videodbg("setting alternate 0\n"); errCode = usb_set_interface(dev->udev, 0, 0); if (errCode < 0) { - em28xx_errdev("cannot change alternate number to " - "0 (error=%i)\n", errCode); + pr_err("cannot change alternate number to 0 (error=%i)\n", + errCode); } } @@ -2422,13 +2419,12 @@ static int em28xx_v4l2_init(struct em28xx *dev) return 0; } - em28xx_info("Registering V4L2 extension\n"); + pr_info("Registering V4L2 extension\n"); mutex_lock(&dev->lock); v4l2 = kzalloc(sizeof(struct em28xx_v4l2), GFP_KERNEL); - if (v4l2 == NULL) { - em28xx_info("em28xx_v4l: memory allocation failed\n"); + if (!v4l2) { mutex_unlock(&dev->lock); return -ENOMEM; } @@ -2441,7 +2437,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) #endif ret = v4l2_device_register(&dev->udev->dev, &v4l2->v4l2_dev); if (ret < 0) { - em28xx_errdev("Call to v4l2_device_register() failed!\n"); + pr_err("Call to v4l2_device_register() failed!\n"); goto err; } @@ -2525,8 +2521,8 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* Configure audio */ ret = em28xx_audio_setup(dev); if (ret < 0) { - em28xx_errdev("%s: Error while setting audio - error [%d]!\n", - __func__, ret); + pr_err("%s: Error while setting audio - error [%d]!\n", + __func__, ret); goto unregister_dev; } if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { @@ -2553,16 +2549,16 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* Send a reset to other chips via gpio */ ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); if (ret < 0) { - em28xx_errdev("%s: em28xx_write_reg - msp34xx(1) failed! error [%d]\n", - __func__, ret); + pr_err("%s: em28xx_write_reg - msp34xx(1) failed! error [%d]\n", + __func__, ret); goto unregister_dev; } msleep(3); ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); if (ret < 0) { - em28xx_errdev("%s: em28xx_write_reg - msp34xx(2) failed! error [%d]\n", - __func__, ret); + pr_err("%s: em28xx_write_reg - msp34xx(2) failed! error [%d]\n", + __func__, ret); goto unregister_dev; } msleep(3); @@ -2663,8 +2659,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) ret = video_register_device(&v4l2->vdev, VFL_TYPE_GRABBER, video_nr[dev->devno]); if (ret) { - em28xx_errdev("unable to register video device (error=%i).\n", - ret); + pr_err("unable to register video device (error=%i).\n", ret); goto unregister_dev; } @@ -2693,7 +2688,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) ret = video_register_device(&v4l2->vbi_dev, VFL_TYPE_VBI, vbi_nr[dev->devno]); if (ret < 0) { - em28xx_errdev("unable to register vbi device\n"); + pr_err("unable to register vbi device\n"); goto unregister_dev; } } @@ -2704,11 +2699,11 @@ static int em28xx_v4l2_init(struct em28xx *dev) ret = video_register_device(&v4l2->radio_dev, VFL_TYPE_RADIO, radio_nr[dev->devno]); if (ret < 0) { - em28xx_errdev("can't register radio device\n"); + pr_err("can't register radio device\n"); goto unregister_dev; } - em28xx_info("Registered radio device as %s\n", - video_device_node_name(&v4l2->radio_dev)); + pr_info("Registered radio device as %s\n", + video_device_node_name(&v4l2->radio_dev)); } /* Init entities at the Media Controller */ @@ -2717,18 +2712,18 @@ static int em28xx_v4l2_init(struct em28xx *dev) #ifdef CONFIG_MEDIA_CONTROLLER ret = v4l2_mc_create_media_graph(dev->media_dev); if (ret) { - em28xx_errdev("failed to create media graph\n"); + pr_err("failed to create media graph\n"); em28xx_v4l2_media_release(dev); goto unregister_dev; } #endif - em28xx_info("V4L2 video device registered as %s\n", - video_device_node_name(&v4l2->vdev)); + pr_info("V4L2 video device registered as %s\n", + video_device_node_name(&v4l2->vdev)); if (video_is_registered(&v4l2->vbi_dev)) - em28xx_info("V4L2 VBI device registered as %s\n", - video_device_node_name(&v4l2->vbi_dev)); + pr_info("V4L2 VBI device registered as %s\n", + video_device_node_name(&v4l2->vbi_dev)); /* Save some power by putting tuner to sleep */ v4l2_device_call_all(&v4l2->v4l2_dev, 0, core, s_power, 0); @@ -2736,7 +2731,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* initialize videobuf2 stuff */ em28xx_vb2_setup(dev); - em28xx_info("V4L2 extension successfully initialized\n"); + pr_info("V4L2 extension successfully initialized\n"); kref_get(&dev->ref); @@ -2745,18 +2740,18 @@ static int em28xx_v4l2_init(struct em28xx *dev) unregister_dev: if (video_is_registered(&v4l2->radio_dev)) { - em28xx_info("V4L2 device %s deregistered\n", - video_device_node_name(&v4l2->radio_dev)); + pr_info("V4L2 device %s deregistered\n", + video_device_node_name(&v4l2->radio_dev)); video_unregister_device(&v4l2->radio_dev); } if (video_is_registered(&v4l2->vbi_dev)) { - em28xx_info("V4L2 device %s deregistered\n", - video_device_node_name(&v4l2->vbi_dev)); + pr_info("V4L2 device %s deregistered\n", + video_device_node_name(&v4l2->vbi_dev)); video_unregister_device(&v4l2->vbi_dev); } if (video_is_registered(&v4l2->vdev)) { - em28xx_info("V4L2 device %s deregistered\n", - video_device_node_name(&v4l2->vdev)); + pr_info("V4L2 device %s deregistered\n", + video_device_node_name(&v4l2->vdev)); video_unregister_device(&v4l2->vdev); } diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index d148463b22c1..0f6830f5078b 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -29,6 +29,8 @@ #define EM28XX_VERSION "0.2.2" #define DRIVER_DESC "Empia em28xx device driver" +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/workqueue.h> #include <linux/i2c.h> #include <linux/mutex.h> @@ -797,20 +799,4 @@ void em28xx_free_device(struct kref *ref); int em28xx_detect_sensor(struct em28xx *dev); int em28xx_init_camera(struct em28xx *dev); -/* printk macros */ - -#define em28xx_err(fmt, arg...) do {\ - printk(KERN_ERR fmt , ##arg); } while (0) - -#define em28xx_errdev(fmt, arg...) do {\ - printk(KERN_ERR "%s: "fmt,\ - dev->name , ##arg); } while (0) - -#define em28xx_info(fmt, arg...) do {\ - printk(KERN_INFO "%s: "fmt,\ - dev->name , ##arg); } while (0) -#define em28xx_warn(fmt, arg...) do {\ - printk(KERN_WARNING "%s: "fmt,\ - dev->name , ##arg); } while (0) - #endif diff --git a/drivers/media/usb/gspca/gspca.c b/drivers/media/usb/gspca/gspca.c index af2395a76d8b..fa2cbb981905 100644 --- a/drivers/media/usb/gspca/gspca.c +++ b/drivers/media/usb/gspca/gspca.c @@ -201,8 +201,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev, buffer_len = le16_to_cpu(ep->wMaxPacketSize); interval = ep->bInterval; - PDEBUG(D_CONF, "found int in endpoint: 0x%x, " - "buffer_len=%u, interval=%u", + PDEBUG(D_CONF, "found int in endpoint: 0x%x, buffer_len=%u, interval=%u", ep->bEndpointAddress, buffer_len, interval); dev = gspca_dev->dev; diff --git a/drivers/media/usb/gspca/jl2005bcd.c b/drivers/media/usb/gspca/jl2005bcd.c index ac295f04bd18..b12ecb72df4c 100644 --- a/drivers/media/usb/gspca/jl2005bcd.c +++ b/drivers/media/usb/gspca/jl2005bcd.c @@ -299,10 +299,7 @@ static int jl2005c_stream_start_cif_small(struct gspca_dev *gspca_dev) static int jl2005c_stop(struct gspca_dev *gspca_dev) { - int retval; - - retval = jl2005c_write_reg(gspca_dev, 0x07, 0x00); - return retval; + return jl2005c_write_reg(gspca_dev, 0x07, 0x00); } /* diff --git a/drivers/media/usb/gspca/m5602/m5602_core.c b/drivers/media/usb/gspca/m5602/m5602_core.c index e4a0658e3f83..f1dcd9021983 100644 --- a/drivers/media/usb/gspca/m5602/m5602_core.c +++ b/drivers/media/usb/gspca/m5602/m5602_core.c @@ -154,8 +154,8 @@ int m5602_read_sensor(struct sd *sd, const u8 address, err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); - PDEBUG(D_CONF, "Reading sensor register " - "0x%x containing 0x%x ", address, *i2c_data); + PDEBUG(D_CONF, "Reading sensor register 0x%x containing 0x%x ", + address, *i2c_data); } return err; } @@ -441,13 +441,10 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(force_sensor, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(force_sensor, - "forces detection of a sensor, " - "1 = OV9650, 2 = S5K83A, 3 = S5K4AA, " - "4 = MT9M111, 5 = PO1030, 6 = OV7660"); + "forces detection of a sensor, 1 = OV9650, 2 = S5K83A, 3 = S5K4AA, 4 = MT9M111, 5 = PO1030, 6 = OV7660"); module_param(dump_bridge, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup"); module_param(dump_sensor, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers " - "at startup providing a sensor is found"); +MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers at startup providing a sensor is found"); diff --git a/drivers/media/usb/gspca/mr97310a.c b/drivers/media/usb/gspca/mr97310a.c index f006e29ca019..6dfb364094ec 100644 --- a/drivers/media/usb/gspca/mr97310a.c +++ b/drivers/media/usb/gspca/mr97310a.c @@ -72,8 +72,7 @@ #define MR97310A_MIN_CLOCKDIV_MAX 8 #define MR97310A_MIN_CLOCKDIV_DEFAULT 3 -MODULE_AUTHOR("Kyle Guinn <elyk03@gmail.com>," - "Theodore Kilgore <kilgota@auburn.edu>"); +MODULE_AUTHOR("Kyle Guinn <elyk03@gmail.com>,Theodore Kilgore <kilgota@auburn.edu>"); MODULE_DESCRIPTION("GSPCA/Mars-Semi MR97310A USB Camera Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c index 965372a5ff2f..4dbca54cf2a8 100644 --- a/drivers/media/usb/gspca/ov519.c +++ b/drivers/media/usb/gspca/ov519.c @@ -4326,8 +4326,7 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev, /* Frame end */ if ((in[9] + 1) * 8 != gspca_dev->pixfmt.width || (in[10] + 1) * 8 != gspca_dev->pixfmt.height) { - PERR("Invalid frame size, got: %dx%d," - " requested: %dx%d\n", + PERR("Invalid frame size, got: %dx%d, requested: %dx%d\n", (in[9] + 1) * 8, (in[10] + 1) * 8, gspca_dev->pixfmt.width, gspca_dev->pixfmt.height); diff --git a/drivers/media/usb/gspca/pac207.c b/drivers/media/usb/gspca/pac207.c index 07529e5a0c56..51e11248bbb8 100644 --- a/drivers/media/usb/gspca/pac207.c +++ b/drivers/media/usb/gspca/pac207.c @@ -179,8 +179,8 @@ static int sd_config(struct gspca_dev *gspca_dev, } PDEBUG(D_PROBE, - "Pixart PAC207BCA Image Processor and Control Chip detected" - " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct); + "Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x%04X:0x%04X)", + id->idVendor, id->idProduct); cam = &gspca_dev->cam; cam->cam_mode = sif_mode; diff --git a/drivers/media/usb/gspca/pac7302.c b/drivers/media/usb/gspca/pac7302.c index 8b08bd0172f4..be07a24c4518 100644 --- a/drivers/media/usb/gspca/pac7302.c +++ b/drivers/media/usb/gspca/pac7302.c @@ -105,8 +105,7 @@ #define PAC7302_EXPOSURE_DEFAULT 66 /* 33 ms / 30 fps */ #define PAC7302_EXPOSURE_KNEE 133 /* 66 ms / 15 fps */ -MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, " - "Thomas Kaiser thomas@kaiser-linux.li"); +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Thomas Kaiser thomas@kaiser-linux.li"); MODULE_DESCRIPTION("Pixart PAC7302"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c index 10269dad9d20..e7430b06526a 100644 --- a/drivers/media/usb/gspca/sn9c20x.c +++ b/drivers/media/usb/gspca/sn9c20x.c @@ -29,8 +29,7 @@ #include <linux/dmi.h> -MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, " - "microdia project <microdia@googlegroups.com>"); +MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, microdia project <microdia@googlegroups.com>"); MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver"); MODULE_LICENSE("GPL"); @@ -1948,8 +1947,7 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev) intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface); if (intf->num_altsetting != 9) { - pr_warn("sn9c20x camera with unknown number of alt " - "settings (%d), please report!\n", + pr_warn("sn9c20x camera with unknown number of alt settings (%d), please report!\n", intf->num_altsetting); gspca_dev->alt = intf->num_altsetting; return 0; diff --git a/drivers/media/usb/gspca/spca506.c b/drivers/media/usb/gspca/spca506.c index bcd2c04c770e..ee84863d27d4 100644 --- a/drivers/media/usb/gspca/spca506.c +++ b/drivers/media/usb/gspca/spca506.c @@ -581,8 +581,7 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06e1, 0xa190)}, -/*fixme: may be IntelPCCameraPro BRIDGE_SPCA505 - {USB_DEVICE(0x0733, 0x0430)}, */ +/* {USB_DEVICE(0x0733, 0x0430)}, FIXME: may be IntelPCCameraPro BRIDGE_SPCA505 */ {USB_DEVICE(0x0734, 0x043b)}, {USB_DEVICE(0x99fa, 0x8988)}, {} diff --git a/drivers/media/usb/gspca/sq905.c b/drivers/media/usb/gspca/sq905.c index a7ae0ec9fa91..9424c33f0ddb 100644 --- a/drivers/media/usb/gspca/sq905.c +++ b/drivers/media/usb/gspca/sq905.c @@ -41,8 +41,7 @@ #include <linux/slab.h> #include "gspca.h" -MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>, " - "Theodore Kilgore <kilgota@auburn.edu>"); +MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>, Theodore Kilgore <kilgota@auburn.edu>"); MODULE_DESCRIPTION("GSPCA/SQ905 USB Camera Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/gspca/sq905c.c b/drivers/media/usb/gspca/sq905c.c index aa21edc9502d..6c45dcc44eb0 100644 --- a/drivers/media/usb/gspca/sq905c.c +++ b/drivers/media/usb/gspca/sq905c.c @@ -210,8 +210,8 @@ static int sd_config(struct gspca_dev *gspca_dev, int ret; PDEBUG(D_PROBE, - "SQ9050 camera detected" - " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct); + "SQ9050 camera detected (vid/pid 0x%04X:0x%04X)", + id->idVendor, id->idProduct); ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0); if (ret < 0) { @@ -257,11 +257,8 @@ static void sd_stop0(struct gspca_dev *gspca_dev) /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { - int ret; - /* connect to the camera and reset it. */ - ret = sq905c_command(gspca_dev, SQ905C_CLEAR, 0); - return ret; + return sq905c_command(gspca_dev, SQ905C_CLEAR, 0); } /* Set up for getting frames. */ diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c index 6ac93d8db427..fef7a784b879 100644 --- a/drivers/media/usb/gspca/stv06xx/stv06xx.c +++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c @@ -412,8 +412,7 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev, len -= 4; if (len < chunk_len) { - PERR("URB packet length is smaller" - " than the specified chunk length"); + PERR("URB packet length is smaller than the specified chunk length"); gspca_dev->last_packet_type = DISCARD_PACKET; return; } @@ -455,8 +454,7 @@ frame_data: sd->to_skip = gspca_dev->pixfmt.width * 4; if (chunk_len) - PERR("Chunk length is " - "non-zero on a SOF"); + PERR("Chunk length is non-zero on a SOF"); break; case 0x8002: @@ -469,8 +467,7 @@ frame_data: NULL, 0); if (chunk_len) - PERR("Chunk length is " - "non-zero on a EOF"); + PERR("Chunk length is non-zero on a EOF"); break; case 0x0005: @@ -582,18 +579,12 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { - /* QuickCam Express */ - {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, - /* LEGO cam / QuickCam Web */ - {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, - /* Dexxa WebCam USB */ - {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, - /* QuickCam Messenger */ - {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, - /* QuickCam Communicate */ - {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, - /* QuickCam Messenger (new) */ - {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, + {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, /* QuickCam Express */ + {USB_DEVICE(0x046d, 0x0850), .driver_info = BRIDGE_STV610 }, /* LEGO cam / QuickCam Web */ + {USB_DEVICE(0x046d, 0x0870), .driver_info = BRIDGE_STV602 }, /* Dexxa WebCam USB */ + {USB_DEVICE(0x046D, 0x08F0), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger */ + {USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 }, /* QuickCam Communicate */ + {USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 }, /* QuickCam Messenger (new) */ {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c index 46c9f2229a18..38dc9e7aa313 100644 --- a/drivers/media/usb/gspca/sunplus.c +++ b/drivers/media/usb/gspca/sunplus.c @@ -368,8 +368,7 @@ static void spca504_read_info(struct gspca_dev *gspca_dev) info[i] = gspca_dev->usb_buf[0]; } PDEBUG(D_STREAM, - "Read info: %d %d %d %d %d %d." - " Should be 1,0,2,2,0,0", + "Read info: %d %d %d %d %d %d. Should be 1,0,2,2,0,0", info[0], info[1], info[2], info[3], info[4], info[5]); } diff --git a/drivers/media/usb/gspca/topro.c b/drivers/media/usb/gspca/topro.c index 15eb069ab60b..983fc6b500af 100644 --- a/drivers/media/usb/gspca/topro.c +++ b/drivers/media/usb/gspca/topro.c @@ -24,8 +24,7 @@ #include "gspca.h" MODULE_DESCRIPTION("Topro TP6800/6810 gspca webcam driver"); -MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, " - "Anders Blomdell <anders.blomdell@control.lth.se>"); +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Anders Blomdell <anders.blomdell@control.lth.se>"); MODULE_LICENSE("GPL"); static int force_sensor = -1; diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c index 5f7254d2bc9a..d5d8c7e81762 100644 --- a/drivers/media/usb/gspca/zc3xx.c +++ b/drivers/media/usb/gspca/zc3xx.c @@ -25,8 +25,7 @@ #include "gspca.h" #include "jpeg.h" -MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, " - "Serge A. Suchkov <Serge.A.S@tochka.ru>"); +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Serge A. Suchkov <Serge.A.S@tochka.ru>"); MODULE_DESCRIPTION("GSPCA ZC03xx/VC3xx USB Camera Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c index a61d8fd63c12..15f016ad5b89 100644 --- a/drivers/media/usb/hdpvr/hdpvr-core.c +++ b/drivers/media/usb/hdpvr/hdpvr-core.c @@ -41,13 +41,11 @@ MODULE_PARM_DESC(hdpvr_debug, "enable debugging output"); static uint default_video_input = HDPVR_VIDEO_INPUTS; module_param(default_video_input, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / " - "1=S-Video / 2=Composite"); +MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / 1=S-Video / 2=Composite"); static uint default_audio_input = HDPVR_AUDIO_INPUTS; module_param(default_audio_input, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / " - "1=RCA front / 2=S/PDIF"); +MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / 1=RCA front / 2=S/PDIF"); static bool boost_audio; module_param(boost_audio, bool, S_IRUGO|S_IWUSR); @@ -165,8 +163,7 @@ static int device_authorization(struct hdpvr_device *dev) dev->flags |= HDPVR_FLAG_AC3_CAP; break; default: - v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might" - " not work.\n"); + v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might not work.\n"); if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3) dev->flags |= HDPVR_FLAG_AC3_CAP; else diff --git a/drivers/media/usb/hdpvr/hdpvr-i2c.c b/drivers/media/usb/hdpvr/hdpvr-i2c.c index 9b641c4d4431..fcab55038d99 100644 --- a/drivers/media/usb/hdpvr/hdpvr-i2c.c +++ b/drivers/media/usb/hdpvr/hdpvr-i2c.c @@ -145,15 +145,14 @@ static int hdpvr_transfer(struct i2c_adapter *i2c_adapter, struct i2c_msg *msgs, msgs[0].len); } else if (num == 2) { if (msgs[0].addr != msgs[1].addr) { - v4l2_warn(&dev->v4l2_dev, "refusing 2-phase i2c xfer " - "with conflicting target addresses\n"); + v4l2_warn(&dev->v4l2_dev, "refusing 2-phase i2c xfer with conflicting target addresses\n"); retval = -EINVAL; goto out; } if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD)) { - v4l2_warn(&dev->v4l2_dev, "refusing complex xfer with " - "r0=%d, r1=%d\n", msgs[0].flags & I2C_M_RD, + v4l2_warn(&dev->v4l2_dev, "refusing complex xfer with r0=%d, r1=%d\n", + msgs[0].flags & I2C_M_RD, msgs[1].flags & I2C_M_RD); retval = -EINVAL; goto out; diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c index 474c11e1d495..7fb036d6a86e 100644 --- a/drivers/media/usb/hdpvr/hdpvr-video.c +++ b/drivers/media/usb/hdpvr/hdpvr-video.c @@ -336,9 +336,7 @@ static int hdpvr_stop_streaming(struct hdpvr_device *dev) buf = kmalloc(dev->bulk_in_size, GFP_KERNEL); if (!buf) - v4l2_err(&dev->v4l2_dev, "failed to allocate temporary buffer " - "for emptying the internal device buffer. " - "Next capture start will be slow\n"); + v4l2_err(&dev->v4l2_dev, "failed to allocate temporary buffer for emptying the internal device buffer. Next capture start will be slow\n"); dev->status = STATUS_SHUTTING_DOWN; hdpvr_config_call(dev, CTRL_STOP_STREAMING_VALUE, 0x00); @@ -451,6 +449,7 @@ static ssize_t hdpvr_read(struct file *file, char __user *buffer, size_t count, if (buf->status != BUFSTAT_READY && dev->status != STATUS_DISCONNECTED) { + int err; /* return nonblocking */ if (file->f_flags & O_NONBLOCK) { if (!ret) @@ -458,9 +457,24 @@ static ssize_t hdpvr_read(struct file *file, char __user *buffer, size_t count, goto err; } - if (wait_event_interruptible(dev->wait_data, - buf->status == BUFSTAT_READY)) - return -ERESTARTSYS; + err = wait_event_interruptible_timeout(dev->wait_data, + buf->status == BUFSTAT_READY, + msecs_to_jiffies(1000)); + if (err < 0) { + ret = err; + goto err; + } + if (!err) { + v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, + "timeout: restart streaming\n"); + hdpvr_stop_streaming(dev); + msecs_to_jiffies(4000); + err = hdpvr_start_streaming(dev); + if (err) { + ret = err; + goto err; + } + } } if (buf->status != BUFSTAT_READY) diff --git a/drivers/staging/media/pulse8-cec/Kconfig b/drivers/media/usb/pulse8-cec/Kconfig index c6aa2d1c9df0..6ffc407de62f 100644 --- a/drivers/staging/media/pulse8-cec/Kconfig +++ b/drivers/media/usb/pulse8-cec/Kconfig @@ -1,6 +1,6 @@ config USB_PULSE8_CEC tristate "Pulse Eight HDMI CEC" - depends on USB_ACM && MEDIA_CEC + depends on USB_ACM && MEDIA_CEC_SUPPORT select SERIO select SERIO_SERPORT ---help--- diff --git a/drivers/staging/media/pulse8-cec/Makefile b/drivers/media/usb/pulse8-cec/Makefile index 9800690bc25a..9800690bc25a 100644 --- a/drivers/staging/media/pulse8-cec/Makefile +++ b/drivers/media/usb/pulse8-cec/Makefile diff --git a/drivers/staging/media/pulse8-cec/pulse8-cec.c b/drivers/media/usb/pulse8-cec/pulse8-cec.c index 1732c3857b8e..9092494bb43c 100644 --- a/drivers/staging/media/pulse8-cec/pulse8-cec.c +++ b/drivers/media/usb/pulse8-cec/pulse8-cec.c @@ -375,27 +375,35 @@ static int pulse8_setup(struct pulse8 *pulse8, struct serio *serio, switch (log_addrs->primary_device_type[0]) { case CEC_OP_PRIM_DEVTYPE_TV: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TV; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TV; break; case CEC_OP_PRIM_DEVTYPE_RECORD: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_RECORD; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_RECORD; break; case CEC_OP_PRIM_DEVTYPE_TUNER: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_TUNER; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_TUNER; break; case CEC_OP_PRIM_DEVTYPE_PLAYBACK: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_PLAYBACK; break; case CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_PLAYBACK; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM; break; case CEC_OP_PRIM_DEVTYPE_SWITCH: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH; break; case CEC_OP_PRIM_DEVTYPE_PROCESSOR: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_SPECIFIC; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH; break; default: log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED; + log_addrs->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH; dev_info(pulse8->dev, "Unknown Primary Device Type: %d\n", log_addrs->primary_device_type[0]); break; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-audio.c b/drivers/media/usb/pvrusb2/pvrusb2-audio.c index 5f953d837bf1..3bac50a248d4 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-audio.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-audio.c @@ -74,9 +74,7 @@ void pvr2_msp3400_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) input = sp->def[hdw->input_val]; } else { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "*** WARNING *** subdev msp3400 set_input:" - " Invalid routing scheme (%u)" - " and/or input (%d)", + "*** WARNING *** subdev msp3400 set_input: Invalid routing scheme (%u) and/or input (%d)", sid, hdw->input_val); return; } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c index f82f0f0f2c04..7f29a0464f36 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-cs53l32a.c @@ -72,9 +72,7 @@ void pvr2_cs53l32a_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) (hdw->input_val < 0) || (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "*** WARNING *** subdev v4l2 set_input:" - " Invalid routing scheme (%u)" - " and/or input (%d)", + "*** WARNING *** subdev v4l2 set_input: Invalid routing scheme (%u) and/or input (%d)", sid, hdw->input_val); return; } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c index 7d675fae1846..30eef97ef2ef 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -137,9 +137,7 @@ void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) (hdw->input_val < 0) || (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "*** WARNING *** subdev cx2584x set_input:" - " Invalid routing scheme (%u)" - " and/or input (%d)", + "*** WARNING *** subdev cx2584x set_input: Invalid routing scheme (%u) and/or input (%d)", sid, hdw->input_val); return; } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c index e4022bcb155b..58ec706ebdb3 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-debugifc.c @@ -176,9 +176,7 @@ int pvr2_debugifc_print_status(struct pvr2_hdw *hdw, pvr2_stream_get_stats(sp, &stats, 0); ccnt = scnprintf( buf,acnt, - "Bytes streamed=%u" - " URBs: queued=%u idle=%u ready=%u" - " processed=%u failed=%u\n", + "Bytes streamed=%u URBs: queued=%u idle=%u ready=%u processed=%u failed=%u\n", stats.bytes_processed, stats.buffers_in_queue, stats.buffers_in_idle, diff --git a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c index e1907cd0c3b7..276b17fb9aad 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c @@ -56,8 +56,7 @@ static u8 *pvr2_eeprom_fetch(struct pvr2_hdw *hdw) eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL); if (!eeprom) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Failed to allocate memory" - " required to read eeprom"); + "Failed to allocate memory required to read eeprom"); return NULL; } @@ -74,8 +73,8 @@ static u8 *pvr2_eeprom_fetch(struct pvr2_hdw *hdw) strange but it's what they do) */ mode16 = (addr & 1); eepromSize = (mode16 ? 4096 : 256); - trace_eeprom("Examining %d byte eeprom at location 0x%x" - " using %d bit addressing",eepromSize,addr, + trace_eeprom("Examining %d byte eeprom at location 0x%x using %d bit addressing", + eepromSize, addr, mode16 ? 16 : 8); msg[0].addr = addr; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-encoder.c b/drivers/media/usb/pvrusb2/pvrusb2-encoder.c index 593b3e9b6bfd..f0483621d2a3 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-encoder.c @@ -188,9 +188,7 @@ static int pvr2_encoder_cmd(void *ctxt, if (arg_cnt_send > (ARRAY_SIZE(wrData) - 4)) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Failed to write cx23416 command" - " - too many input arguments" - " (was given %u limit %lu)", + "Failed to write cx23416 command - too many input arguments (was given %u limit %lu)", arg_cnt_send, (long unsigned) ARRAY_SIZE(wrData) - 4); return -EINVAL; } @@ -198,9 +196,7 @@ static int pvr2_encoder_cmd(void *ctxt, if (arg_cnt_recv > (ARRAY_SIZE(rdData) - 4)) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Failed to write cx23416 command" - " - too many return arguments" - " (was given %u limit %lu)", + "Failed to write cx23416 command - too many return arguments (was given %u limit %lu)", arg_cnt_recv, (long unsigned) ARRAY_SIZE(rdData) - 4); return -EINVAL; } @@ -248,14 +244,12 @@ static int pvr2_encoder_cmd(void *ctxt, retry_flag = !0; pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Encoder timed out waiting for us" - "; arranging to retry"); + "Encoder timed out waiting for us; arranging to retry"); } else { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "***WARNING*** device's encoder" - " appears to be stuck" - " (status=0x%08x)",rdData[0]); + "***WARNING*** device's encoder appears to be stuck (status=0x%08x)", +rdData[0]); } pvr2_trace( PVR2_TRACE_ERROR_LEGS, @@ -293,11 +287,7 @@ static int pvr2_encoder_cmd(void *ctxt, } pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Giving up on command." - " This is normally recovered via a firmware" - " reload and re-initialization; concern" - " is only warranted if this happens repeatedly" - " and rapidly."); + "Giving up on command. This is normally recovered via a firmware reload and re-initialization; concern is only warranted if this happens repeatedly and rapidly."); break; } wrData[0] = 0x7; @@ -325,9 +315,7 @@ static int pvr2_encoder_vcmd(struct pvr2_hdw *hdw, int cmd, if (args > ARRAY_SIZE(data)) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Failed to write cx23416 command" - " - too many arguments" - " (was given %u limit %lu)", + "Failed to write cx23416 command - too many arguments (was given %u limit %lu)", args, (long unsigned) ARRAY_SIZE(data)); return -EINVAL; } @@ -433,8 +421,7 @@ int pvr2_encoder_configure(struct pvr2_hdw *hdw) { int ret; int val; - pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure" - " (cx2341x module)"); + pvr2_trace(PVR2_TRACE_ENCODER, "pvr2_encoder_configure (cx2341x module)"); hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING; hdw->enc_ctl_state.width = hdw->res_hor_val; hdw->enc_ctl_state.height = hdw->res_ver_val; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c index 1eb4f7ba2967..e3ed8ffee9f7 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c @@ -1371,8 +1371,7 @@ static int pvr2_locate_firmware(struct pvr2_hdw *hdw, fwnames[idx], &hdw->usb_dev->dev); if (!ret) { - trace_firmware("Located %s firmware: %s;" - " uploading...", + trace_firmware("Located %s firmware: %s; uploading...", fwtypename, fwnames[idx]); return idx; @@ -1383,21 +1382,17 @@ static int pvr2_locate_firmware(struct pvr2_hdw *hdw, return ret; } pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "***WARNING***" - " Device %s firmware" - " seems to be missing.", + "***WARNING*** Device %s firmware seems to be missing.", fwtypename); pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Did you install the pvrusb2 firmware files" - " in their proper location?"); + "Did you install the pvrusb2 firmware files in their proper location?"); if (fwcount == 1) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "request_firmware unable to locate %s file %s", fwtypename,fwnames[0]); } else { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "request_firmware unable to locate" - " one of the following %s files:", + "request_firmware unable to locate one of the following %s files:", fwtypename); for (idx = 0; idx < fwcount; idx++) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, @@ -1431,8 +1426,7 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) if (!hdw->hdw_desc->fx2_firmware.cnt) { hdw->fw1_state = FW1_STATE_OK; pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Connected device type defines" - " no firmware to upload; ignoring firmware"); + "Connected device type defines no firmware to upload; ignoring firmware"); return -ENOTTY; } @@ -1457,13 +1451,11 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) (!(hdw->hdw_desc->flag_fx2_16kb && (fwsize == 0x4000)))) { if (hdw->hdw_desc->flag_fx2_16kb) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Wrong fx2 firmware size" - " (expected 8192 or 16384, got %u)", + "Wrong fx2 firmware size (expected 8192 or 16384, got %u)", fwsize); } else { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Wrong fx2 firmware size" - " (expected 8192, got %u)", + "Wrong fx2 firmware size (expected 8192, got %u)", fwsize); } release_firmware(fw_entry); @@ -1585,8 +1577,7 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) if (fw_len % sizeof(u32)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "size of %s firmware" - " must be a multiple of %zu bytes", + "size of %s firmware must be a multiple of %zu bytes", fw_files[fwidx],sizeof(u32)); release_firmware(fw_entry); ret = -EINVAL; @@ -1887,8 +1878,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom); pvr2_trace(PVR2_TRACE_STD, - "Supported video standard(s) reported available" - " in hardware: %.*s", + "Supported video standard(s) reported available in hardware: %.*s", bcnt,buf); hdw->std_mask_avail = hdw->std_mask_eeprom; @@ -1897,8 +1887,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) if (std2) { bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2); pvr2_trace(PVR2_TRACE_STD, - "Expanding supported video standards" - " to include: %.*s", + "Expanding supported video standards to include: %.*s", bcnt,buf); hdw->std_mask_avail |= std2; } @@ -1917,8 +1906,8 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) if (std3) { bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3); pvr2_trace(PVR2_TRACE_STD, - "Initial video standard" - " (determined by device type): %.*s",bcnt,buf); + "Initial video standard (determined by device type): %.*s", + bcnt, buf); hdw->std_mask_cur = std3; hdw->std_dirty = !0; return; @@ -1980,8 +1969,7 @@ static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw) } pvr2_trace(PVR2_TRACE_INIT, - "Module ID %u:" - " Executing cx25840 VBI hack", + "Module ID %u: Executing cx25840 VBI hack", hdw->decoder_client_id); memset(&fmt, 0, sizeof(fmt)); fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; @@ -2007,8 +1995,7 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL; if (!fname) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Module ID %u for device %s has no name?" - " The driver might have a configuration problem.", + "Module ID %u for device %s has no name? The driver might have a configuration problem.", mid, hdw->hdw_desc->description); return -EINVAL; @@ -2027,32 +2014,27 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, ARRAY_SIZE(i2caddr)); if (i2ccnt) { pvr2_trace(PVR2_TRACE_INIT, - "Module ID %u:" - " Using default i2c address list", + "Module ID %u: Using default i2c address list", mid); } } if (!i2ccnt) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Module ID %u (%s) for device %s:" - " No i2c addresses." - " The driver might have a configuration problem.", + "Module ID %u (%s) for device %s: No i2c addresses. The driver might have a configuration problem.", mid, fname, hdw->hdw_desc->description); return -EINVAL; } if (i2ccnt == 1) { pvr2_trace(PVR2_TRACE_INIT, - "Module ID %u:" - " Setting up with specified i2c address 0x%x", + "Module ID %u: Setting up with specified i2c address 0x%x", mid, i2caddr[0]); sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, fname, i2caddr[0], NULL); } else { pvr2_trace(PVR2_TRACE_INIT, - "Module ID %u:" - " Setting up with address probe list", + "Module ID %u: Setting up with address probe list", mid); sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, fname, 0, i2caddr); @@ -2060,9 +2042,7 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, if (!sd) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Module ID %u (%s) for device %s failed to load." - " Possible missing sub-device kernel module or" - " initialization failure within module.", + "Module ID %u (%s) for device %s failed to load. Possible missing sub-device kernel module or initialization failure within module.", mid, fname, hdw->hdw_desc->description); return -EIO; } @@ -2124,18 +2104,14 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) == 0); if (reloadFl) { pvr2_trace(PVR2_TRACE_INIT, - "USB endpoint config looks strange" - "; possibly firmware needs to be" - " loaded"); + "USB endpoint config looks strange; possibly firmware needs to be loaded"); } } if (!reloadFl) { reloadFl = !pvr2_hdw_check_firmware(hdw); if (reloadFl) { pvr2_trace(PVR2_TRACE_INIT, - "Check for FX2 firmware failed" - "; possibly firmware needs to be" - " loaded"); + "Check for FX2 firmware failed; possibly firmware needs to be loaded"); } } if (reloadFl) { @@ -2200,8 +2176,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) if (!pvr2_hdw_dev_ok(hdw)) return; if (ret < 0) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Unable to determine location of eeprom," - " skipping"); + "Unable to determine location of eeprom, skipping"); } else { hdw->eeprom_addr = ret; pvr2_eeprom_analyze(hdw); @@ -2254,8 +2229,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) idx = get_default_error_tolerance(hdw); if (idx) { pvr2_trace(PVR2_TRACE_INIT, - "pvr2_hdw_setup: video stream %p" - " setting tolerance %u", + "pvr2_hdw_setup: video stream %p setting tolerance %u", hdw->vid_stream,idx); } pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev, @@ -2285,16 +2259,13 @@ static void pvr2_hdw_setup(struct pvr2_hdw *hdw) if (hdw->flag_init_ok) { pvr2_trace( PVR2_TRACE_INFO, - "Device initialization" - " completed successfully."); + "Device initialization completed successfully."); break; } if (hdw->fw1_state == FW1_STATE_RELOAD) { pvr2_trace( PVR2_TRACE_INFO, - "Device microcontroller firmware" - " (re)loaded; it should now reset" - " and reconnect."); + "Device microcontroller firmware (re)loaded; it should now reset and reconnect."); break; } pvr2_trace( @@ -2303,48 +2274,35 @@ static void pvr2_hdw_setup(struct pvr2_hdw *hdw) if (hdw->fw1_state == FW1_STATE_MISSING) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Giving up since device" - " microcontroller firmware" - " appears to be missing."); + "Giving up since device microcontroller firmware appears to be missing."); break; } } if (hdw->flag_modulefail) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "***WARNING*** pvrusb2 driver initialization" - " failed due to the failure of one or more" - " sub-device kernel modules."); + "***WARNING*** pvrusb2 driver initialization failed due to the failure of one or more sub-device kernel modules."); pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "You need to resolve the failing condition" - " before this driver can function. There" - " should be some earlier messages giving more" - " information about the problem."); + "You need to resolve the failing condition before this driver can function. There should be some earlier messages giving more information about the problem."); break; } if (procreload) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Attempting pvrusb2 recovery by reloading" - " primary firmware."); + "Attempting pvrusb2 recovery by reloading primary firmware."); pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "If this works, device should disconnect" - " and reconnect in a sane state."); + "If this works, device should disconnect and reconnect in a sane state."); hdw->fw1_state = FW1_STATE_UNKNOWN; pvr2_upload_firmware1(hdw); } else { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "***WARNING*** pvrusb2 device hardware" - " appears to be jammed" - " and I can't clear it."); + "***WARNING*** pvrusb2 device hardware appears to be jammed and I can't clear it."); pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "You might need to power cycle" - " the pvrusb2 device" - " in order to recover."); + "You might need to power cycle the pvrusb2 device in order to recover."); } } while (0); pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw); @@ -2396,12 +2354,8 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info); if (hdw_desc == NULL) { - pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create:" - " No device description pointer," - " unable to continue."); - pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type," - " please contact Mike Isely <isely@pobox.com>" - " to get it included in the driver\n"); + pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create: No device description pointer, unable to continue."); + pvr2_trace(PVR2_TRACE_INIT, "If you have a new device type, please contact Mike Isely <isely@pobox.com> to get it included in the driver\n"); goto fail; } @@ -2413,14 +2367,12 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, if (hdw_desc->flag_is_experimental) { pvr2_trace(PVR2_TRACE_INFO, "**********"); pvr2_trace(PVR2_TRACE_INFO, - "WARNING: Support for this device (%s) is" - " experimental.", hdw_desc->description); + "WARNING: Support for this device (%s) is experimental.", + hdw_desc->description); pvr2_trace(PVR2_TRACE_INFO, - "Important functionality might not be" - " entirely working."); + "Important functionality might not be entirely working."); pvr2_trace(PVR2_TRACE_INFO, - "Please consider contacting the driver author to" - " help with further stabilization of the driver."); + "Please consider contacting the driver author to help with further stabilization of the driver."); pvr2_trace(PVR2_TRACE_INFO, "**********"); } if (!hdw) goto fail; @@ -3375,8 +3327,7 @@ static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw) eeprom = kmalloc(EEPROM_SIZE,GFP_KERNEL); if (!eeprom) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Failed to allocate memory" - " required to read eeprom"); + "Failed to allocate memory required to read eeprom"); return NULL; } @@ -3393,8 +3344,8 @@ static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw) strange but it's what they do) */ mode16 = (addr & 1); eepromSize = (mode16 ? EEPROM_SIZE : 256); - trace_eeprom("Examining %d byte eeprom at location 0x%x" - " using %d bit addressing",eepromSize,addr, + trace_eeprom("Examining %d byte eeprom at location 0x%x using %d bit addressing", + eepromSize, addr, mode16 ? 16 : 8); msg[0].addr = addr; @@ -3461,8 +3412,8 @@ void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw, if (hdw->fw_cpu_flag) { hdw->fw_size = (mode == 1) ? 0x4000 : 0x2000; pvr2_trace(PVR2_TRACE_FIRMWARE, - "Preparing to suck out CPU firmware" - " (size=%u)", hdw->fw_size); + "Preparing to suck out CPU firmware (size=%u)", + hdw->fw_size); hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL); if (!hdw->fw_buffer) { hdw->fw_size = 0; @@ -3620,21 +3571,18 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, struct timer_list timer; if (!hdw->ctl_lock_held) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Attempted to execute control transfer" - " without lock!!"); + "Attempted to execute control transfer without lock!!"); return -EDEADLK; } if (!hdw->flag_ok && !probe_fl) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Attempted to execute control transfer" - " when device not ok"); + "Attempted to execute control transfer when device not ok"); return -EIO; } if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) { if (!probe_fl) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Attempted to execute control transfer" - " when USB is disconnected"); + "Attempted to execute control transfer when USB is disconnected"); } return -ENOTTY; } @@ -3645,16 +3593,14 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, if (write_len > PVR2_CTL_BUFFSIZE) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Attempted to execute %d byte" - " control-write transfer (limit=%d)", + "Attempted to execute %d byte control-write transfer (limit=%d)", write_len,PVR2_CTL_BUFFSIZE); return -EINVAL; } if (read_len > PVR2_CTL_BUFFSIZE) { pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "Attempted to execute %d byte" - " control-read transfer (limit=%d)", + "Attempted to execute %d byte control-read transfer (limit=%d)", write_len,PVR2_CTL_BUFFSIZE); return -EINVAL; } @@ -3703,8 +3649,8 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL); if (status < 0) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Failed to submit write-control" - " URB status=%d",status); + "Failed to submit write-control URB status=%d", +status); hdw->ctl_write_pend_flag = 0; goto done; } @@ -3727,8 +3673,8 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL); if (status < 0) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Failed to submit read-control" - " URB status=%d",status); + "Failed to submit read-control URB status=%d", +status); hdw->ctl_read_pend_flag = 0; goto done; } @@ -3770,8 +3716,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, status = hdw->ctl_write_urb->status; if (!probe_fl) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "control-write URB failure," - " status=%d", + "control-write URB failure, status=%d", status); } goto done; @@ -3781,8 +3726,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, status = -EIO; if (!probe_fl) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "control-write URB short," - " expected=%d got=%d", + "control-write URB short, expected=%d got=%d", write_len, hdw->ctl_write_urb->actual_length); } @@ -3800,8 +3744,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, status = hdw->ctl_read_urb->status; if (!probe_fl) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "control-read URB failure," - " status=%d", + "control-read URB failure, status=%d", status); } goto done; @@ -3811,8 +3754,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, status = -EIO; if (!probe_fl) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "control-read URB short," - " expected=%d got=%d", + "control-read URB short, expected=%d got=%d", read_len, hdw->ctl_read_urb->actual_length); } @@ -4799,9 +4741,7 @@ static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, 0); return scnprintf( buf,acnt, - "Bytes streamed=%u" - " URBs: queued=%u idle=%u ready=%u" - " processed=%u failed=%u", + "Bytes streamed=%u URBs: queued=%u idle=%u ready=%u processed=%u failed=%u", stats.bytes_processed, stats.buffers_in_queue, stats.buffers_in_idle, @@ -5013,8 +4953,7 @@ int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val) if (ret) return ret; nval = (cval & ~msk) | (val & msk); pvr2_trace(PVR2_TRACE_GPIO, - "GPIO direction changing 0x%x:0x%x" - " from 0x%x to 0x%x", + "GPIO direction changing 0x%x:0x%x from 0x%x to 0x%x", msk,val,cval,nval); } else { nval = val; @@ -5057,9 +4996,7 @@ void pvr2_hdw_status_poll(struct pvr2_hdw *hdw) now. (Of course, no sub-drivers seem to implement it either. But now it's a a chicken and egg problem...) */ v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, vtp); - pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll" - " type=%u strength=%u audio=0x%x cap=0x%x" - " low=%u hi=%u", + pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll type=%u strength=%u audio=0x%x cap=0x%x low=%u hi=%u", vtp->type, vtp->signal, vtp->rxsubchans, vtp->capability, vtp->rangelow, vtp->rangehigh); diff --git a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c index 6da5fb544817..48d837e39a9c 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c @@ -62,8 +62,7 @@ static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */ if (!data) length = 0; if (length > (sizeof(hdw->cmd_buffer) - 3)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Killing an I2C write to %u that is too large" - " (desired=%u limit=%u)", + "Killing an I2C write to %u that is too large (desired=%u limit=%u)", i2c_addr, length,(unsigned int)(sizeof(hdw->cmd_buffer) - 3)); return -ENOTSUPP; @@ -90,8 +89,7 @@ static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */ if (hdw->cmd_buffer[0] != 8) { ret = -EIO; if (hdw->cmd_buffer[0] != 7) { - trace_i2c("unexpected status" - " from i2_write[%d]: %d", + trace_i2c("unexpected status from i2_write[%d]: %d", i2c_addr,hdw->cmd_buffer[0]); } } @@ -116,16 +114,14 @@ static int pvr2_i2c_read(struct pvr2_hdw *hdw, /* Context */ if (!data) dlen = 0; if (dlen > (sizeof(hdw->cmd_buffer) - 4)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Killing an I2C read to %u that has wlen too large" - " (desired=%u limit=%u)", + "Killing an I2C read to %u that has wlen too large (desired=%u limit=%u)", i2c_addr, dlen,(unsigned int)(sizeof(hdw->cmd_buffer) - 4)); return -ENOTSUPP; } if (res && (rlen > (sizeof(hdw->cmd_buffer) - 1))) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Killing an I2C read to %u that has rlen too large" - " (desired=%u limit=%u)", + "Killing an I2C read to %u that has rlen too large (desired=%u limit=%u)", i2c_addr, rlen,(unsigned int)(sizeof(hdw->cmd_buffer) - 1)); return -ENOTSUPP; @@ -154,8 +150,7 @@ static int pvr2_i2c_read(struct pvr2_hdw *hdw, /* Context */ if (hdw->cmd_buffer[0] != 8) { ret = -EIO; if (hdw->cmd_buffer[0] != 7) { - trace_i2c("unexpected status" - " from i2_read[%d]: %d", + trace_i2c("unexpected status from i2_read[%d]: %d", i2c_addr,hdw->cmd_buffer[0]); } } @@ -352,13 +347,11 @@ static int i2c_hack_cx25840(struct pvr2_hdw *hdw, if ((ret != 0) || (*rdata == 0x04) || (*rdata == 0x0a)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "WARNING: Detected a wedged cx25840 chip;" - " the device will not work."); + "WARNING: Detected a wedged cx25840 chip; the device will not work."); pvr2_trace(PVR2_TRACE_ERROR_LEGS, "WARNING: Try power cycling the pvrusb2 device."); pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "WARNING: Disabling further access to the device" - " to prevent other foul-ups."); + "WARNING: Disabling further access to the device to prevent other foul-ups."); // This blocks all further communication with the part. hdw->i2c_func[0x44] = NULL; pvr2_hdw_render_useless(hdw); @@ -444,8 +437,7 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap, } } else if (num == 2) { if (msgs[0].addr != msgs[1].addr) { - trace_i2c("i2c refusing 2 phase transfer with" - " conflicting target addresses"); + trace_i2c("i2c refusing 2 phase transfer with conflicting target addresses"); ret = -ENOTSUPP; goto done; } @@ -477,8 +469,7 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap, ret = 2; goto done; } else { - trace_i2c("i2c refusing complex transfer" - " read0=%d read1=%d", + trace_i2c("i2c refusing complex transfer read0=%d read1=%d", (msgs[0].flags & I2C_M_RD), (msgs[1].flags & I2C_M_RD)); } @@ -492,8 +483,7 @@ static int pvr2_i2c_xfer(struct i2c_adapter *i2c_adap, for (idx = 0; idx < num; idx++) { cnt = msgs[idx].len; printk(KERN_INFO - "pvrusb2 i2c xfer %u/%u:" - " addr=0x%x len=%d %s", + "pvrusb2 i2c xfer %u/%u: addr=0x%x len=%d %s", idx+1,num, msgs[idx].addr, cnt, @@ -668,8 +658,7 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) the emulated IR receiver. */ if (do_i2c_probe(hdw, 0x71)) { pvr2_trace(PVR2_TRACE_INFO, - "Device has newer IR hardware;" - " disabling unneeded virtual IR device"); + "Device has newer IR hardware; disabling unneeded virtual IR device"); hdw->i2c_func[0x18] = NULL; /* Remember that this is a different device... */ hdw->ir_scheme_active = PVR2_IR_SCHEME_24XXX_MCE; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-io.c b/drivers/media/usb/pvrusb2/pvrusb2-io.c index e68ce24f27e3..e3103ecd4828 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-io.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-io.c @@ -113,8 +113,7 @@ static const char *pvr2_buffer_state_decode(enum pvr2_buffer_state st) static void pvr2_buffer_describe(struct pvr2_buffer *bp,const char *msg) { pvr2_trace(PVR2_TRACE_INFO, - "buffer%s%s %p state=%s id=%d status=%d" - " stream=%p purb=%p sig=0x%x", + "buffer%s%s %p state=%s id=%d status=%d stream=%p purb=%p sig=0x%x", (msg ? " " : ""), (msg ? msg : ""), bp, @@ -156,8 +155,7 @@ static void pvr2_buffer_remove(struct pvr2_buffer *bp) (*cnt)--; (*bcnt) -= ccnt; pvr2_trace(PVR2_TRACE_BUF_FLOW, - "/*---TRACE_FLOW---*/" - " bufferPool %8s dec cap=%07d cnt=%02d", + "/*---TRACE_FLOW---*/ bufferPool %8s dec cap=%07d cnt=%02d", pvr2_buffer_state_decode(bp->state),*bcnt,*cnt); bp->state = pvr2_buffer_state_none; } @@ -198,8 +196,7 @@ static int pvr2_buffer_set_ready(struct pvr2_buffer *bp) (sp->r_count)++; sp->r_bcount += bp->used_count; pvr2_trace(PVR2_TRACE_BUF_FLOW, - "/*---TRACE_FLOW---*/" - " bufferPool %8s inc cap=%07d cnt=%02d", + "/*---TRACE_FLOW---*/ bufferPool %8s inc cap=%07d cnt=%02d", pvr2_buffer_state_decode(bp->state), sp->r_bcount,sp->r_count); spin_unlock_irqrestore(&sp->list_lock,irq_flags); @@ -224,8 +221,7 @@ static void pvr2_buffer_set_idle(struct pvr2_buffer *bp) (sp->i_count)++; sp->i_bcount += bp->max_count; pvr2_trace(PVR2_TRACE_BUF_FLOW, - "/*---TRACE_FLOW---*/" - " bufferPool %8s inc cap=%07d cnt=%02d", + "/*---TRACE_FLOW---*/ bufferPool %8s inc cap=%07d cnt=%02d", pvr2_buffer_state_decode(bp->state), sp->i_bcount,sp->i_count); spin_unlock_irqrestore(&sp->list_lock,irq_flags); @@ -249,8 +245,7 @@ static void pvr2_buffer_set_queued(struct pvr2_buffer *bp) (sp->q_count)++; sp->q_bcount += bp->max_count; pvr2_trace(PVR2_TRACE_BUF_FLOW, - "/*---TRACE_FLOW---*/" - " bufferPool %8s inc cap=%07d cnt=%02d", + "/*---TRACE_FLOW---*/ bufferPool %8s inc cap=%07d cnt=%02d", pvr2_buffer_state_decode(bp->state), sp->q_bcount,sp->q_count); spin_unlock_irqrestore(&sp->list_lock,irq_flags); @@ -293,8 +288,8 @@ static void pvr2_buffer_done(struct pvr2_buffer *bp) bp->signature = 0; bp->stream = NULL; usb_free_urb(bp->purb); - pvr2_trace(PVR2_TRACE_BUF_POOL,"/*---TRACE_FLOW---*/" - " bufferDone %p",bp); + pvr2_trace(PVR2_TRACE_BUF_POOL, "/*---TRACE_FLOW---*/ bufferDone %p", + bp); } static int pvr2_stream_buffer_count(struct pvr2_stream *sp,unsigned int cnt) @@ -306,8 +301,7 @@ static int pvr2_stream_buffer_count(struct pvr2_stream *sp,unsigned int cnt) if (cnt == sp->buffer_total_count) return 0; pvr2_trace(PVR2_TRACE_BUF_POOL, - "/*---TRACE_FLOW---*/ poolResize " - " stream=%p cur=%d adj=%+d", + "/*---TRACE_FLOW---*/ poolResize stream=%p cur=%d adj=%+d", sp, sp->buffer_total_count, cnt-sp->buffer_total_count); @@ -374,8 +368,7 @@ static int pvr2_stream_achieve_buffer_count(struct pvr2_stream *sp) if (sp->buffer_total_count == sp->buffer_target_count) return 0; pvr2_trace(PVR2_TRACE_BUF_POOL, - "/*---TRACE_FLOW---*/" - " poolCheck stream=%p cur=%d tgt=%d", + "/*---TRACE_FLOW---*/ poolCheck stream=%p cur=%d tgt=%d", sp,sp->buffer_total_count,sp->buffer_target_count); if (sp->buffer_total_count < sp->buffer_target_count) { @@ -454,8 +447,8 @@ static void buffer_complete(struct urb *urb) bp->used_count = urb->actual_length; if (sp->fail_count) { pvr2_trace(PVR2_TRACE_TOLERANCE, - "stream %p transfer ok" - " - fail count reset",sp); + "stream %p transfer ok - fail count reset", + sp); sp->fail_count = 0; } } else if (sp->fail_count < sp->fail_tolerance) { @@ -464,8 +457,7 @@ static void buffer_complete(struct urb *urb) (sp->fail_count)++; (sp->buffers_failed)++; pvr2_trace(PVR2_TRACE_TOLERANCE, - "stream %p ignoring error %d" - " - fail count increased to %u", + "stream %p ignoring error %d - fail count increased to %u", sp,urb->status,sp->fail_count); } else { (sp->buffers_failed)++; @@ -666,8 +658,7 @@ int pvr2_buffer_set_buffer(struct pvr2_buffer *bp,void *ptr,unsigned int cnt) bp->max_count = cnt; bp->stream->i_bcount += bp->max_count; pvr2_trace(PVR2_TRACE_BUF_FLOW, - "/*---TRACE_FLOW---*/ bufferPool " - " %8s cap cap=%07d cnt=%02d", + "/*---TRACE_FLOW---*/ bufferPool %8s cap cap=%07d cnt=%02d", pvr2_buffer_state_decode( pvr2_buffer_state_idle), bp->stream->i_bcount,bp->stream->i_count); diff --git a/drivers/media/usb/pvrusb2/pvrusb2-ioread.c b/drivers/media/usb/pvrusb2/pvrusb2-ioread.c index 614d55767a4e..70b8a052eb5b 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-ioread.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-ioread.c @@ -169,9 +169,7 @@ static int pvr2_ioread_start(struct pvr2_ioread *cp) stat = pvr2_buffer_queue(bp); if (stat < 0) { pvr2_trace(PVR2_TRACE_DATA_FLOW, - "/*---TRACE_READ---*/" - " pvr2_ioread_start id=%p" - " error=%d", + "/*---TRACE_READ---*/ pvr2_ioread_start id=%p error=%d", cp,stat); pvr2_ioread_stop(cp); return stat; @@ -209,8 +207,8 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp) do { if (cp->stream) { pvr2_trace(PVR2_TRACE_START_STOP, - "/*---TRACE_READ---*/" - " pvr2_ioread_setup (tear-down) id=%p",cp); + "/*---TRACE_READ---*/ pvr2_ioread_setup (tear-down) id=%p", + cp); pvr2_ioread_stop(cp); pvr2_stream_kill(cp->stream); if (pvr2_stream_get_buffer_count(cp->stream)) { @@ -220,8 +218,8 @@ int pvr2_ioread_setup(struct pvr2_ioread *cp,struct pvr2_stream *sp) } if (sp) { pvr2_trace(PVR2_TRACE_START_STOP, - "/*---TRACE_READ---*/" - " pvr2_ioread_setup (setup) id=%p",cp); + "/*---TRACE_READ---*/ pvr2_ioread_setup (setup) id=%p", + cp); pvr2_stream_kill(sp); ret = pvr2_stream_set_buffer_count(sp,BUFFER_COUNT); if (ret < 0) { @@ -270,9 +268,7 @@ static int pvr2_ioread_get_buffer(struct pvr2_ioread *cp) if (stat < 0) { // Streaming error... pvr2_trace(PVR2_TRACE_DATA_FLOW, - "/*---TRACE_READ---*/" - " pvr2_ioread_read id=%p" - " queue_error=%d", + "/*---TRACE_READ---*/ pvr2_ioread_read id=%p queue_error=%d", cp,stat); pvr2_ioread_stop(cp); return 0; @@ -292,9 +288,7 @@ static int pvr2_ioread_get_buffer(struct pvr2_ioread *cp) if (stat < 0) { // Streaming error... pvr2_trace(PVR2_TRACE_DATA_FLOW, - "/*---TRACE_READ---*/" - " pvr2_ioread_read id=%p" - " buffer_error=%d", + "/*---TRACE_READ---*/ pvr2_ioread_read id=%p buffer_error=%d", cp,stat); pvr2_ioread_stop(cp); // Give up. @@ -347,8 +341,7 @@ static void pvr2_ioread_filter(struct pvr2_ioread *cp) if (cp->sync_buf_offs >= cp->sync_key_len) { cp->sync_trashed_count -= cp->sync_key_len; pvr2_trace(PVR2_TRACE_DATA_FLOW, - "/*---TRACE_READ---*/" - " sync_state <== 2 (skipped %u bytes)", + "/*---TRACE_READ---*/ sync_state <== 2 (skipped %u bytes)", cp->sync_trashed_count); cp->sync_state = 2; cp->sync_buf_offs = 0; @@ -358,8 +351,7 @@ static void pvr2_ioread_filter(struct pvr2_ioread *cp) if (cp->c_data_offs < cp->c_data_len) { // Sanity check - should NEVER get here pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "ERROR: pvr2_ioread filter sync problem" - " len=%u offs=%u", + "ERROR: pvr2_ioread filter sync problem len=%u offs=%u", cp->c_data_len,cp->c_data_offs); // Get out so we don't get stuck in an infinite // loop. @@ -418,8 +410,8 @@ int pvr2_ioread_read(struct pvr2_ioread *cp,void __user *buf,unsigned int cnt) if (!cnt) { pvr2_trace(PVR2_TRACE_TRAP, - "/*---TRACE_READ---*/ pvr2_ioread_read id=%p" - " ZERO Request? Returning zero.",cp); + "/*---TRACE_READ---*/ pvr2_ioread_read id=%p ZERO Request? Returning zero.", +cp); return 0; } @@ -477,8 +469,7 @@ int pvr2_ioread_read(struct pvr2_ioread *cp,void __user *buf,unsigned int cnt) // Consumed entire key; switch mode // to normal. pvr2_trace(PVR2_TRACE_DATA_FLOW, - "/*---TRACE_READ---*/" - " sync_state <== 0"); + "/*---TRACE_READ---*/ sync_state <== 0"); cp->sync_state = 0; } } else { @@ -502,8 +493,7 @@ int pvr2_ioread_read(struct pvr2_ioread *cp,void __user *buf,unsigned int cnt) } pvr2_trace(PVR2_TRACE_DATA_FLOW, - "/*---TRACE_READ---*/ pvr2_ioread_read" - " id=%p request=%d result=%d", + "/*---TRACE_READ---*/ pvr2_ioread_read id=%p request=%d result=%d", cp,req_cnt,ret); return ret; } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-std.c b/drivers/media/usb/pvrusb2/pvrusb2-std.c index 9a596a3a4c27..cd7bc18a1ba2 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-std.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-std.c @@ -357,8 +357,7 @@ struct v4l2_standard *pvr2_std_create_enum(unsigned int *countptr, bcnt = pvr2_std_id_to_str(buf,sizeof(buf),fmsk); pvr2_trace( PVR2_TRACE_ERROR_LEGS, - "WARNING:" - " Failed to classify the following standard(s): %.*s", + "WARNING: Failed to classify the following standard(s): %.*s", bcnt,buf); } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c index 06fe63ced58c..d977976b8d91 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-sysfs.c @@ -116,7 +116,6 @@ static ssize_t show_type(struct device *class_dev, } pvr2_sysfs_trace("pvr2_sysfs(%p) show_type(cid=%d) is %s", cip->chptr, cip->ctl_id, name); - if (!name) return -EINVAL; return scnprintf(buf, PAGE_SIZE, "%s\n", name); } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c index 2cc4d2b6f810..bbbe18d5275a 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-v4l2.c @@ -949,8 +949,8 @@ static long pvr2_v4l2_ioctl(struct file *file, if (ret < 0) { if (pvrusb2_debug & PVR2_TRACE_V4LIOCTL) { pvr2_trace(PVR2_TRACE_V4LIOCTL, - "pvr2_v4l2_do_ioctl failure, ret=%ld" - " command was:", ret); + "pvr2_v4l2_do_ioctl failure, ret=%ld command was:", +ret); v4l_printk_ioctl(pvr2_hdw_get_driver_name(hdw), cmd); } } else { @@ -1254,8 +1254,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip, nr_ptr = video_nr; if (!dip->stream) { pr_err(KBUILD_MODNAME - ": Failed to set up pvrusb2 v4l video dev" - " due to missing stream instance\n"); + ": Failed to set up pvrusb2 v4l video dev due to missing stream instance\n"); return; } break; @@ -1272,8 +1271,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip, break; default: /* Bail out (this should be impossible) */ - pr_err(KBUILD_MODNAME ": Failed to set up pvrusb2 v4l dev" - " due to unrecognized config\n"); + pr_err(KBUILD_MODNAME ": Failed to set up pvrusb2 v4l dev due to unrecognized config\n"); return; } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c index 105123ab36aa..6fee367139aa 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-video-v4l.c @@ -91,9 +91,7 @@ void pvr2_saa7115_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) (hdw->input_val < 0) || (hdw->input_val >= sp->cnt)) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "*** WARNING *** subdev v4l2 set_input:" - " Invalid routing scheme (%u)" - " and/or input (%d)", + "*** WARNING *** subdev v4l2 set_input: Invalid routing scheme (%u) and/or input (%d)", sid, hdw->input_val); return; } diff --git a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c index f1df94a2436f..7993983de5a6 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-wm8775.c @@ -49,8 +49,7 @@ void pvr2_wm8775_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) input = 2; break; } - pvr2_trace(PVR2_TRACE_CHIPS, "subdev wm8775" - " set_input(val=%d route=0x%x)", + pvr2_trace(PVR2_TRACE_CHIPS, "subdev wm8775 set_input(val=%d route=0x%x)", hdw->input_val, input); sd->ops->audio->s_routing(sd, input, 0, 0); diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c index ff657644b6b3..22420c14ac98 100644 --- a/drivers/media/usb/pwc/pwc-if.c +++ b/drivers/media/usb/pwc/pwc-if.c @@ -238,8 +238,8 @@ static void pwc_frame_complete(struct pwc_device *pdev) } else { /* Check for underflow first */ if (fbuf->filled < pdev->frame_total_size) { - PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes);" - " discarded.\n", fbuf->filled); + PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes); discarded.\n", + fbuf->filled); } else { fbuf->vb.field = V4L2_FIELD_NONE; fbuf->vb.sequence = pdev->vframe_count; diff --git a/drivers/media/usb/pwc/pwc-v4l.c b/drivers/media/usb/pwc/pwc-v4l.c index 3d987984602f..92f04db6bbae 100644 --- a/drivers/media/usb/pwc/pwc-v4l.c +++ b/drivers/media/usb/pwc/pwc-v4l.c @@ -406,8 +406,7 @@ static void pwc_vidioc_fill_fmt(struct v4l2_format *f, f->fmt.pix.bytesperline = f->fmt.pix.width; f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.width * 3 / 2; f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; - PWC_DEBUG_IOCTL("pwc_vidioc_fill_fmt() " - "width=%d, height=%d, bytesperline=%d, sizeimage=%d, pixelformat=%c%c%c%c\n", + PWC_DEBUG_IOCTL("pwc_vidioc_fill_fmt() width=%d, height=%d, bytesperline=%d, sizeimage=%d, pixelformat=%c%c%c%c\n", f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.bytesperline, @@ -473,8 +472,7 @@ static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) pixelformat = f->fmt.pix.pixelformat; - PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d " - "format=%c%c%c%c\n", + PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d format=%c%c%c%c\n", f->fmt.pix.width, f->fmt.pix.height, pdev->vframes, (pixelformat)&255, (pixelformat>>8)&255, diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c index c2e25876e93b..a4dcaec31d02 100644 --- a/drivers/media/usb/siano/smsusb.c +++ b/drivers/media/usb/siano/smsusb.c @@ -604,8 +604,8 @@ static int smsusb_resume(struct usb_interface *intf) intf->cur_altsetting->desc. bInterfaceNumber, 0); if (rc < 0) { - printk(KERN_INFO "%s usb_set_interface failed, " - "rc %d\n", __func__, rc); + printk(KERN_INFO "%s usb_set_interface failed, rc %d\n", + __func__, rc); return rc; } } diff --git a/drivers/media/usb/stkwebcam/stk-sensor.c b/drivers/media/usb/stkwebcam/stk-sensor.c index e546b014d7ad..13ad8fdf05bb 100644 --- a/drivers/media/usb/stkwebcam/stk-sensor.c +++ b/drivers/media/usb/stkwebcam/stk-sensor.c @@ -391,8 +391,8 @@ int stk_sensor_init(struct stk_camera *dev) } stk_sensor_write_regvals(dev, ov_initvals); msleep(10); - STK_INFO("OmniVision sensor detected, id %02X%02X" - " at address %x\n", idh, idl, SENSOR_ADDRESS); + STK_INFO("OmniVision sensor detected, id %02X%02X at address %x\n", + idh, idl, SENSOR_ADDRESS); return 0; } diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c index 22a9aae16291..e2e7d0f7a43c 100644 --- a/drivers/media/usb/stkwebcam/stk-webcam.c +++ b/drivers/media/usb/stkwebcam/stk-webcam.c @@ -372,8 +372,7 @@ static void stk_isoc_handler(struct urb *urb) if (fb->v4lbuf.bytesused != 0 && fb->v4lbuf.bytesused != dev->frame_size) { (void) (printk_ratelimit() && - STK_ERROR("frame %d, " - "bytesused=%d, skipping\n", + STK_ERROR("frame %d, bytesused=%d, skipping\n", i, fb->v4lbuf.bytesused)); fb->v4lbuf.bytesused = 0; fill = fb->buffer; diff --git a/drivers/media/usb/tm6000/tm6000-alsa.c b/drivers/media/usb/tm6000/tm6000-alsa.c index f16fbd1f9f51..422322541af6 100644 --- a/drivers/media/usb/tm6000/tm6000-alsa.c +++ b/drivers/media/usb/tm6000/tm6000-alsa.c @@ -58,9 +58,7 @@ MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s)."); MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards"); MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("{{Trident,tm5600}," - "{{Trident,tm6000}," - "{{Trident,tm6010}"); +MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},{{Trident,tm6000},{{Trident,tm6010}"); static unsigned int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable debug messages"); diff --git a/drivers/media/usb/tm6000/tm6000-core.c b/drivers/media/usb/tm6000/tm6000-core.c index 7c32353c59db..8d104e5c4be3 100644 --- a/drivers/media/usb/tm6000/tm6000-core.c +++ b/drivers/media/usb/tm6000/tm6000-core.c @@ -602,8 +602,8 @@ int tm6000_init(struct tm6000_core *dev) for (i = 0; i < size; i++) { rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val); if (rc < 0) { - printk(KERN_ERR "Error %i while setting req %d, " - "reg %d to value %d\n", rc, + printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", + rc, tab[i].req, tab[i].reg, tab[i].val); return rc; } @@ -761,9 +761,8 @@ int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute) if (dev->dev_type == TM6010) tm6010_set_mute_sif(dev, mute); else { - printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has" - " SIF audio inputs. Please check the %s" - " configuration.\n", dev->name); + printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", + dev->name); return -EINVAL; } break; @@ -822,9 +821,8 @@ void tm6000_set_volume(struct tm6000_core *dev, int vol) if (dev->dev_type == TM6010) tm6010_set_volume_sif(dev, vol); else - printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has" - " SIF audio inputs. Please check the %s" - " configuration.\n", dev->name); + printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", + dev->name); break; case TM6000_AMUX_ADC1: case TM6000_AMUX_ADC2: diff --git a/drivers/media/usb/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c index 0426b210383b..70dbaec1219e 100644 --- a/drivers/media/usb/tm6000/tm6000-dvb.c +++ b/drivers/media/usb/tm6000/tm6000-dvb.c @@ -35,9 +35,7 @@ MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV ca MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("{{Trident, tm5600}," - "{{Trident, tm6000}," - "{{Trident, tm6010}"); +MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},{{Trident, tm6000},{{Trident, tm6010}"); static int debug; @@ -292,13 +290,11 @@ static int register_dvb(struct tm6000_core *dev) } if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) { - printk(KERN_ERR "tm6000: couldn't register " - "frontend (xc3028)\n"); + printk(KERN_ERR "tm6000: couldn't register frontend (xc3028)\n"); ret = -EINVAL; goto frontend_err; } - printk(KERN_INFO "tm6000: XC2028/3028 asked to be " - "attached to frontend!\n"); + printk(KERN_INFO "tm6000: XC2028/3028 asked to be attached to frontend!\n"); break; } case TUNER_XC5000: { @@ -315,13 +311,11 @@ static int register_dvb(struct tm6000_core *dev) } if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) { - printk(KERN_ERR "tm6000: couldn't register " - "frontend (xc5000)\n"); + printk(KERN_ERR "tm6000: couldn't register frontend (xc5000)\n"); ret = -EINVAL; goto frontend_err; } - printk(KERN_INFO "tm6000: XC5000 asked to be " - "attached to frontend!\n"); + printk(KERN_INFO "tm6000: XC5000 asked to be attached to frontend!\n"); break; } } diff --git a/drivers/media/usb/tm6000/tm6000-i2c.c b/drivers/media/usb/tm6000/tm6000-i2c.c index c7e23e3dd75e..b01d3ee56e77 100644 --- a/drivers/media/usb/tm6000/tm6000-i2c.c +++ b/drivers/media/usb/tm6000/tm6000-i2c.c @@ -173,8 +173,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap, * immediately after a 1 or 2 byte write to select * a register. We cannot fulfil this request. */ - i2c_dprintk(2, " read without preceding write not" - " supported"); + i2c_dprintk(2, " read without preceding write not supported"); rc = -EOPNOTSUPP; goto err; } else if (i + 1 < num && msgs[i].len <= 2 && diff --git a/drivers/media/usb/tm6000/tm6000-stds.c b/drivers/media/usb/tm6000/tm6000-stds.c index 93a4b2434b6e..4064a5e8fae1 100644 --- a/drivers/media/usb/tm6000/tm6000-stds.c +++ b/drivers/media/usb/tm6000/tm6000-stds.c @@ -464,8 +464,7 @@ static int tm6000_load_std(struct tm6000_core *dev, struct tm6000_reg_settings * for (i = 0; set[i].req; i++) { rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value); if (rc < 0) { - printk(KERN_ERR "Error %i while setting " - "req %d, reg %d to value %d\n", + printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", rc, set[i].req, set[i].reg, set[i].value); return rc; } diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c index dee7e7d3d47d..d9f3fa5db8dd 100644 --- a/drivers/media/usb/tm6000/tm6000-video.c +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -615,8 +615,7 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev) return -ENOMEM; } - dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets" - " (%d bytes) of %d bytes each to handle %u size\n", + dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets (%d bytes) of %d bytes each to handle %u size\n", max_packets, num_bufs, sb_size, dev->isoc_in.maxsize, size); @@ -939,8 +938,8 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, fmt = format_by_fourcc(f->fmt.pix.pixelformat); if (NULL == fmt) { - dprintk(dev, 2, "Fourcc format (0x%08x)" - " invalid.\n", f->fmt.pix.pixelformat); + dprintk(dev, 2, "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); return -EINVAL; } @@ -1366,14 +1365,13 @@ static int __tm6000_open(struct file *file) fh->width = dev->width; fh->height = dev->height; - dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, " - "dev->vidq=0x%08lx\n", + dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n", (unsigned long)fh, (unsigned long)dev, (unsigned long)&dev->vidq); - dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty " - "queued=%d\n", list_empty(&dev->vidq.queued)); - dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty " - "active=%d\n", list_empty(&dev->vidq.active)); + dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty queued=%d\n", + list_empty(&dev->vidq.queued)); + dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty active=%d\n", + list_empty(&dev->vidq.active)); /* initialize hardware on analog mode */ rc = tm6000_init_analog_mode(dev); diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c index d52d4a8d39ad..361e40b56045 100644 --- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c @@ -767,8 +767,7 @@ static void ttusb_iso_irq(struct urb *urb) for (i = 0; i < urb->number_of_packets; ++i) { numpkt++; if (time_after_eq(jiffies, lastj + HZ)) { - dprintk("frames/s: %lu (ts: %d, stuff %d, " - "sec: %d, invalid: %d, all: %d)\n", + dprintk("frames/s: %lu (ts: %d, stuff %d, sec: %d, invalid: %d, all: %d)\n", numpkt * HZ / (jiffies - lastj), numts, numstuff, numsec, numinvalid, numts + numstuff + numsec + numinvalid); diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c index 4e7671a3a1e4..559c823a4fe8 100644 --- a/drivers/media/usb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c @@ -36,7 +36,6 @@ #include "dmxdev.h" #include "dvb_demux.h" -#include "dvb_filter.h" #include "dvb_frontend.h" #include "dvb_net.h" #include "ttusbdecfe.h" @@ -92,6 +91,15 @@ enum ttusb_dec_interface { TTUSB_DEC_INTERFACE_OUT }; +typedef int (dvb_filter_pes2ts_cb_t) (void *, unsigned char *); + +struct dvb_filter_pes2ts { + unsigned char buf[188]; + unsigned char cc; + dvb_filter_pes2ts_cb_t *cb; + void *priv; +}; + struct ttusb_dec { enum ttusb_dec_model model; char *model_name; @@ -201,6 +209,54 @@ static u16 rc_keys[] = { KEY_RADIO }; +static void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, + unsigned short pid, + dvb_filter_pes2ts_cb_t *cb, void *priv) +{ + unsigned char *buf=p2ts->buf; + + buf[0]=0x47; + buf[1]=(pid>>8); + buf[2]=pid&0xff; + p2ts->cc=0; + p2ts->cb=cb; + p2ts->priv=priv; +} + +static int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, + unsigned char *pes, int len, int payload_start) +{ + unsigned char *buf=p2ts->buf; + int ret=0, rest; + + //len=6+((pes[4]<<8)|pes[5]); + + if (payload_start) + buf[1]|=0x40; + else + buf[1]&=~0x40; + while (len>=184) { + buf[3]=0x10|((p2ts->cc++)&0x0f); + memcpy(buf+4, pes, 184); + if ((ret=p2ts->cb(p2ts->priv, buf))) + return ret; + len-=184; pes+=184; + buf[1]&=~0x40; + } + if (!len) + return 0; + buf[3]=0x30|((p2ts->cc++)&0x0f); + rest=183-len; + if (rest) { + buf[5]=0x00; + if (rest-1) + memset(buf+6, 0xff, rest-1); + } + buf[4]=rest; + memcpy(buf+5+rest, pes, len); + return p2ts->cb(p2ts->priv, buf); +} + static void ttusb_dec_set_model(struct ttusb_dec *dec, enum ttusb_dec_model model); @@ -652,8 +708,8 @@ static void ttusb_dec_process_urb_frame(struct ttusb_dec *dec, u8 *b, dec->packet_payload_length = 2; dec->packet_state = 7; } else { - printk("%s: unknown packet type: " - "%02x%02x\n", __func__, + printk("%s: unknown packet type: %02x%02x\n", + __func__, dec->packet[0], dec->packet[1]); dec->packet_state = 0; } @@ -905,8 +961,8 @@ static int ttusb_dec_start_iso_xfer(struct ttusb_dec *dec) for (i = 0; i < ISO_BUF_COUNT; i++) { if ((result = usb_submit_urb(dec->iso_urb[i], GFP_ATOMIC))) { - printk("%s: failed urb submission %d: " - "error %d\n", __func__, i, result); + printk("%s: failed urb submission %d: error %d\n", + __func__, i, result); while (i) { usb_kill_urb(dec->iso_urb[i - 1]); @@ -1319,8 +1375,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) memcpy(&tmp, &firmware[56], 4); crc32_check = ntohl(tmp); if (crc32_csum != crc32_check) { - printk("%s: crc32 check of DSP code failed (calculated " - "0x%08x != 0x%08x in file), file invalid.\n", + printk("%s: crc32 check of DSP code failed (calculated 0x%08x != 0x%08x in file), file invalid.\n", __func__, crc32_csum, crc32_check); release_firmware(fw_entry); return -ENOENT; @@ -1397,11 +1452,9 @@ static int ttusb_dec_init_stb(struct ttusb_dec *dec) if (!mode) { if (version == 0xABCDEFAB) - printk(KERN_INFO "ttusb_dec: no version " - "info in Firmware\n"); + printk(KERN_INFO "ttusb_dec: no version info in Firmware\n"); else - printk(KERN_INFO "ttusb_dec: Firmware " - "%x.%02x%c%c\n", + printk(KERN_INFO "ttusb_dec: Firmware %x.%02x%c%c\n", version >> 24, (version >> 16) & 0xff, (version >> 8) & 0xff, version & 0xff); @@ -1425,8 +1478,7 @@ static int ttusb_dec_init_stb(struct ttusb_dec *dec) ttusb_dec_set_model(dec, TTUSB_DEC2540T); break; default: - printk(KERN_ERR "%s: unknown model returned " - "by firmware (%08x) - please report\n", + printk(KERN_ERR "%s: unknown model returned by firmware (%08x) - please report\n", __func__, model); return -ENOENT; } diff --git a/drivers/media/usb/usbtv/usbtv-video.c b/drivers/media/usb/usbtv/usbtv-video.c index 6cbe4a245c9f..d3b6d3dfaa09 100644 --- a/drivers/media/usb/usbtv/usbtv-video.c +++ b/drivers/media/usb/usbtv/usbtv-video.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013 Lubomir Rintel + * Copyright (c) 2013,2016 Lubomir Rintel * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -259,6 +259,10 @@ static int usbtv_setup_capture(struct usbtv *usbtv) if (ret) return ret; + ret = v4l2_ctrl_handler_setup(&usbtv->ctrl); + if (ret) + return ret; + return 0; } @@ -696,11 +700,91 @@ static const struct vb2_ops usbtv_vb2_ops = { .stop_streaming = usbtv_stop_streaming, }; +static int usbtv_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct usbtv *usbtv = container_of(ctrl->handler, struct usbtv, + ctrl); + u8 *data; + u16 index, size; + int ret; + + data = kmalloc(3, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* + * Read in the current brightness/contrast registers. We need them + * both, because the values are for some reason interleaved. + */ + if (ctrl->id == V4L2_CID_BRIGHTNESS || ctrl->id == V4L2_CID_CONTRAST) { + ret = usb_control_msg(usbtv->udev, + usb_sndctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, USBTV_BASE + 0x0244, (void *)data, 3, 0); + if (ret < 0) + goto error; + } + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + index = USBTV_BASE + 0x0244; + size = 3; + data[0] &= 0xf0; + data[0] |= (ctrl->val >> 8) & 0xf; + data[2] = ctrl->val & 0xff; + break; + case V4L2_CID_CONTRAST: + index = USBTV_BASE + 0x0244; + size = 3; + data[0] &= 0x0f; + data[0] |= (ctrl->val >> 4) & 0xf0; + data[1] = ctrl->val & 0xff; + break; + case V4L2_CID_SATURATION: + index = USBTV_BASE + 0x0242; + data[0] = ctrl->val >> 8; + data[1] = ctrl->val & 0xff; + size = 2; + break; + case V4L2_CID_HUE: + index = USBTV_BASE + 0x0240; + size = 2; + if (ctrl->val > 0) { + data[0] = 0x92 + (ctrl->val >> 8); + data[1] = ctrl->val & 0xff; + } else { + data[0] = 0x82 + (-ctrl->val >> 8); + data[1] = -ctrl->val & 0xff; + } + break; + default: + kfree(data); + return -EINVAL; + } + + ret = usb_control_msg(usbtv->udev, usb_sndctrlpipe(usbtv->udev, 0), + USBTV_CONTROL_REG, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, (void *)data, size, 0); + +error: + if (ret < 0) + dev_warn(usbtv->dev, "Failed to submit a control request.\n"); + + kfree(data); + return ret; +} + +static const struct v4l2_ctrl_ops usbtv_ctrl_ops = { + .s_ctrl = usbtv_s_ctrl, +}; + static void usbtv_release(struct v4l2_device *v4l2_dev) { struct usbtv *usbtv = container_of(v4l2_dev, struct usbtv, v4l2_dev); v4l2_device_unregister(&usbtv->v4l2_dev); + v4l2_ctrl_handler_free(&usbtv->ctrl); vb2_queue_release(&usbtv->vb2q); kfree(usbtv); } @@ -731,7 +815,24 @@ int usbtv_video_init(struct usbtv *usbtv) return ret; } + /* controls */ + v4l2_ctrl_handler_init(&usbtv->ctrl, 4); + v4l2_ctrl_new_std(&usbtv->ctrl, &usbtv_ctrl_ops, + V4L2_CID_CONTRAST, 0, 0x3ff, 1, 0x1d0); + v4l2_ctrl_new_std(&usbtv->ctrl, &usbtv_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 0x3ff, 1, 0x1c0); + v4l2_ctrl_new_std(&usbtv->ctrl, &usbtv_ctrl_ops, + V4L2_CID_SATURATION, 0, 0x3ff, 1, 0x200); + v4l2_ctrl_new_std(&usbtv->ctrl, &usbtv_ctrl_ops, + V4L2_CID_HUE, -0xdff, 0xdff, 1, 0x000); + ret = usbtv->ctrl.error; + if (ret < 0) { + dev_warn(usbtv->dev, "Could not initialize controls\n"); + goto ctrl_fail; + } + /* v4l2 structure */ + usbtv->v4l2_dev.ctrl_handler = &usbtv->ctrl; usbtv->v4l2_dev.release = usbtv_release; ret = v4l2_device_register(usbtv->dev, &usbtv->v4l2_dev); if (ret < 0) { @@ -760,6 +861,8 @@ int usbtv_video_init(struct usbtv *usbtv) vdev_fail: v4l2_device_unregister(&usbtv->v4l2_dev); v4l2_fail: +ctrl_fail: + v4l2_ctrl_handler_free(&usbtv->ctrl); vb2_queue_release(&usbtv->vb2q); return ret; diff --git a/drivers/media/usb/usbtv/usbtv.h b/drivers/media/usb/usbtv/usbtv.h index 011f9fdc77a9..0231e449877e 100644 --- a/drivers/media/usb/usbtv/usbtv.h +++ b/drivers/media/usb/usbtv/usbtv.h @@ -38,6 +38,7 @@ #include <linux/usb.h> #include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> #include <media/videobuf2-v4l2.h> #include <media/videobuf2-vmalloc.h> @@ -45,6 +46,7 @@ #define USBTV_VIDEO_ENDP 0x81 #define USBTV_AUDIO_ENDP 0x83 #define USBTV_BASE 0xc000 +#define USBTV_CONTROL_REG 11 #define USBTV_REQUEST_REG 12 /* Number of concurrent isochronous urbs submitted. @@ -87,6 +89,7 @@ struct usbtv { /* video */ struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl; struct video_device vdev; struct vb2_queue vb2q; struct mutex v4l2_lock; diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c index c23bf73a68ea..bf041a9e69db 100644 --- a/drivers/media/usb/usbvision/usbvision-core.c +++ b/drivers/media/usb/usbvision/usbvision-core.c @@ -1656,8 +1656,8 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma (__u16) USBVISION_FILT_CONT, value, 2, HZ); if (rc < 0) { - printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - " - "reconnect or reload driver.\n", proc, rc); + printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - reconnect or reload driver.\n", + proc, rc); } usbvision->isoc_mode = format; return rc; @@ -1890,8 +1890,8 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision) (__u16) USBVISION_INTRA_CYC, value, 5, HZ); if (rc < 0) { - printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " - "reconnect or reload driver.\n", proc, rc); + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", + proc, rc); return rc; } @@ -1921,8 +1921,8 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision) (__u16) USBVISION_PCM_THR1, value, 6, HZ); if (rc < 0) { - printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " - "reconnect or reload driver.\n", proc, rc); + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", + proc, rc); } return rc; } @@ -1960,8 +1960,8 @@ int usbvision_set_input(struct usb_usbvision *usbvision) rc = usbvision_write_reg(usbvision, USBVISION_VIN_REG1, value[0]); if (rc < 0) { - printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " - "reconnect or reload driver.\n", proc, rc); + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", + proc, rc); return rc; } @@ -2026,8 +2026,8 @@ int usbvision_set_input(struct usb_usbvision *usbvision) USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0, (__u16) USBVISION_LXSIZE_I, value, 8, HZ); if (rc < 0) { - printk(KERN_ERR "%sERROR=%d. USBVISION stopped - " - "reconnect or reload driver.\n", proc, rc); + printk(KERN_ERR "%sERROR=%d. USBVISION stopped - reconnect or reload driver.\n", + proc, rc); return rc; } diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c index c8b4eb2ee7a2..a7529196c327 100644 --- a/drivers/media/usb/usbvision/usbvision-video.c +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -1456,8 +1456,8 @@ static int usbvision_probe(struct usb_interface *intf, } if (interface->desc.bNumEndpoints < 2) { - dev_err(&intf->dev, "interface %d has %d endpoints, but must" - " have minimum 2\n", ifnum, interface->desc.bNumEndpoints); + dev_err(&intf->dev, "interface %d has %d endpoints, but must have minimum 2\n", + ifnum, interface->desc.bNumEndpoints); ret = -ENODEV; goto err_usb; } diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 302e284a95eb..11744f92097b 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -1309,7 +1309,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain, switch (UVC_ENTITY_TYPE(entity)) { case UVC_VC_EXTENSION_UNIT: if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" <- XU %d", entity->id); + printk(KERN_CONT " <- XU %d", entity->id); if (entity->bNrInPins != 1) { uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more " @@ -1321,7 +1321,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain, case UVC_VC_PROCESSING_UNIT: if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" <- PU %d", entity->id); + printk(KERN_CONT " <- PU %d", entity->id); if (chain->processing != NULL) { uvc_trace(UVC_TRACE_DESCR, "Found multiple " @@ -1334,7 +1334,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain, case UVC_VC_SELECTOR_UNIT: if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" <- SU %d", entity->id); + printk(KERN_CONT " <- SU %d", entity->id); /* Single-input selector units are ignored. */ if (entity->bNrInPins == 1) @@ -1353,7 +1353,7 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain, case UVC_ITT_CAMERA: case UVC_ITT_MEDIA_TRANSPORT_INPUT: if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" <- IT %d\n", entity->id); + printk(KERN_CONT " <- IT %d\n", entity->id); break; @@ -1361,17 +1361,17 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain, case UVC_OTT_DISPLAY: case UVC_OTT_MEDIA_TRANSPORT_OUTPUT: if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" OT %d", entity->id); + printk(KERN_CONT " OT %d", entity->id); break; case UVC_TT_STREAMING: if (UVC_ENTITY_IS_ITERM(entity)) { if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" <- IT %d\n", entity->id); + printk(KERN_CONT " <- IT %d\n", entity->id); } else { if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" OT %d", entity->id); + printk(KERN_CONT " OT %d", entity->id); } break; @@ -1416,9 +1416,9 @@ static int uvc_scan_chain_forward(struct uvc_video_chain *chain, list_add_tail(&forward->chain, &chain->entities); if (uvc_trace_param & UVC_TRACE_PROBE) { if (!found) - printk(" (->"); + printk(KERN_CONT " (->"); - printk(" XU %d", forward->id); + printk(KERN_CONT " XU %d", forward->id); found = 1; } break; @@ -1436,16 +1436,16 @@ static int uvc_scan_chain_forward(struct uvc_video_chain *chain, list_add_tail(&forward->chain, &chain->entities); if (uvc_trace_param & UVC_TRACE_PROBE) { if (!found) - printk(" (->"); + printk(KERN_CONT " (->"); - printk(" OT %d", forward->id); + printk(KERN_CONT " OT %d", forward->id); found = 1; } break; } } if (found) - printk(")"); + printk(KERN_CONT ")"); return 0; } @@ -1471,7 +1471,7 @@ static int uvc_scan_chain_backward(struct uvc_video_chain *chain, } if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" <- IT"); + printk(KERN_CONT " <- IT"); chain->selector = entity; for (i = 0; i < entity->bNrInPins; ++i) { @@ -1485,14 +1485,14 @@ static int uvc_scan_chain_backward(struct uvc_video_chain *chain, } if (uvc_trace_param & UVC_TRACE_PROBE) - printk(" %d", term->id); + printk(KERN_CONT " %d", term->id); list_add_tail(&term->chain, &chain->entities); uvc_scan_chain_forward(chain, term, entity); } if (uvc_trace_param & UVC_TRACE_PROBE) - printk("\n"); + printk(KERN_CONT "\n"); id = 0; break; @@ -1595,6 +1595,114 @@ static const char *uvc_print_chain(struct uvc_video_chain *chain) return buffer; } +static struct uvc_video_chain *uvc_alloc_chain(struct uvc_device *dev) +{ + struct uvc_video_chain *chain; + + chain = kzalloc(sizeof(*chain), GFP_KERNEL); + if (chain == NULL) + return NULL; + + INIT_LIST_HEAD(&chain->entities); + mutex_init(&chain->ctrl_mutex); + chain->dev = dev; + v4l2_prio_init(&chain->prio); + + return chain; +} + +/* + * Fallback heuristic for devices that don't connect units and terminals in a + * valid chain. + * + * Some devices have invalid baSourceID references, causing uvc_scan_chain() + * to fail, but if we just take the entities we can find and put them together + * in the most sensible chain we can think of, turns out they do work anyway. + * Note: This heuristic assumes there is a single chain. + * + * At the time of writing, devices known to have such a broken chain are + * - Acer Integrated Camera (5986:055a) + * - Realtek rtl157a7 (0bda:57a7) + */ +static int uvc_scan_fallback(struct uvc_device *dev) +{ + struct uvc_video_chain *chain; + struct uvc_entity *iterm = NULL; + struct uvc_entity *oterm = NULL; + struct uvc_entity *entity; + struct uvc_entity *prev; + + /* + * Start by locating the input and output terminals. We only support + * devices with exactly one of each for now. + */ + list_for_each_entry(entity, &dev->entities, list) { + if (UVC_ENTITY_IS_ITERM(entity)) { + if (iterm) + return -EINVAL; + iterm = entity; + } + + if (UVC_ENTITY_IS_OTERM(entity)) { + if (oterm) + return -EINVAL; + oterm = entity; + } + } + + if (iterm == NULL || oterm == NULL) + return -EINVAL; + + /* Allocate the chain and fill it. */ + chain = uvc_alloc_chain(dev); + if (chain == NULL) + return -ENOMEM; + + if (uvc_scan_chain_entity(chain, oterm) < 0) + goto error; + + prev = oterm; + + /* + * Add all Processing and Extension Units with two pads. The order + * doesn't matter much, use reverse list traversal to connect units in + * UVC descriptor order as we build the chain from output to input. This + * leads to units appearing in the order meant by the manufacturer for + * the cameras known to require this heuristic. + */ + list_for_each_entry_reverse(entity, &dev->entities, list) { + if (entity->type != UVC_VC_PROCESSING_UNIT && + entity->type != UVC_VC_EXTENSION_UNIT) + continue; + + if (entity->num_pads != 2) + continue; + + if (uvc_scan_chain_entity(chain, entity) < 0) + goto error; + + prev->baSourceID[0] = entity->id; + prev = entity; + } + + if (uvc_scan_chain_entity(chain, iterm) < 0) + goto error; + + prev->baSourceID[0] = iterm->id; + + list_add_tail(&chain->list, &dev->chains); + + uvc_trace(UVC_TRACE_PROBE, + "Found a video chain by fallback heuristic (%s).\n", + uvc_print_chain(chain)); + + return 0; + +error: + kfree(chain); + return -EINVAL; +} + /* * Scan the device for video chains and register video devices. * @@ -1617,15 +1725,10 @@ static int uvc_scan_device(struct uvc_device *dev) if (term->chain.next || term->chain.prev) continue; - chain = kzalloc(sizeof(*chain), GFP_KERNEL); + chain = uvc_alloc_chain(dev); if (chain == NULL) return -ENOMEM; - INIT_LIST_HEAD(&chain->entities); - mutex_init(&chain->ctrl_mutex); - chain->dev = dev; - v4l2_prio_init(&chain->prio); - term->flags |= UVC_ENTITY_FLAG_DEFAULT; if (uvc_scan_chain(chain, term) < 0) { @@ -1639,6 +1742,9 @@ static int uvc_scan_device(struct uvc_device *dev) list_add_tail(&chain->list, &dev->chains); } + if (list_empty(&dev->chains)) + uvc_scan_fallback(dev); + if (list_empty(&dev->chains)) { uvc_printk(KERN_INFO, "No valid video chain found.\n"); return -1; @@ -2564,6 +2670,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_FORCE_Y8 }, + /* Oculus VR Rift Sensor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x2833, + .idProduct = 0x0211, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_FORCE_Y8 }, /* Generic USB Video Class */ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) }, { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) }, diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c index cc128db85723..3950708cbb32 100644 --- a/drivers/media/usb/zr364xx/zr364xx.c +++ b/drivers/media/usb/zr364xx/zr364xx.c @@ -633,8 +633,7 @@ static int zr364xx_read_video_callback(struct zr364xx_camera *cam, } else { if (frm->cur_size + purb->actual_length > MAX_FRAME_SIZE) { dev_info(&cam->udev->dev, - "%s: buffer (%d bytes) too small to hold " - "frame data. Discarding frame data.\n", + "%s: buffer (%d bytes) too small to hold frame data. Discarding frame data.\n", __func__, MAX_FRAME_SIZE); } else { pdest += frm->cur_size; @@ -1373,8 +1372,7 @@ static int zr364xx_board_init(struct zr364xx_camera *cam) &cam->buffer.frame[i], i, cam->buffer.frame[i].lpvbits); if (cam->buffer.frame[i].lpvbits == NULL) { - printk(KERN_INFO KBUILD_MODNAME ": out of memory. " - "Using less frames\n"); + printk(KERN_INFO KBUILD_MODNAME ": out of memory. Using less frames\n"); break; } } diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig index 367523a3c774..6b1b78ff1417 100644 --- a/drivers/media/v4l2-core/Kconfig +++ b/drivers/media/v4l2-core/Kconfig @@ -6,6 +6,7 @@ config VIDEO_V4L2 tristate depends on (I2C || I2C=n) && VIDEO_DEV + select RATIONAL default (I2C || I2C=n) && VIDEO_DEV config VIDEO_ADV_DEBUG diff --git a/drivers/media/v4l2-core/tuner-core.c b/drivers/media/v4l2-core/tuner-core.c index 731487be5baa..d3a6236b6b02 100644 --- a/drivers/media/v4l2-core/tuner-core.c +++ b/drivers/media/v4l2-core/tuner-core.c @@ -503,8 +503,7 @@ static int tuner_s_type_addr(struct v4l2_subdev *sd, set_type(c, tun_setup->type, tun_setup->mode_mask, tun_setup->config, tun_setup->tuner_callback); } else - tuner_dbg("set addr discarded for type %i, mask %x. " - "Asked to change tuner at addr 0x%02x, with mask %x\n", + tuner_dbg("set addr discarded for type %i, mask %x. Asked to change tuner at addr 0x%02x, with mask %x\n", t->type, t->mode_mask, tun_setup->addr, tun_setup->mode_mask); @@ -618,14 +617,12 @@ static int tuner_probe(struct i2c_client *client, if (show_i2c) { unsigned char buffer[16]; - int i, rc; + int rc; memset(buffer, 0, sizeof(buffer)); rc = i2c_master_recv(client, buffer, sizeof(buffer)); - tuner_info("I2C RECV = "); - for (i = 0; i < rc; i++) - printk(KERN_CONT "%02x ", buffer[i]); - printk("\n"); + if (rc >= 0) + tuner_info("I2C RECV = %*ph\n", rc, buffer); } /* autodetection code based on the i2c addr */ @@ -809,8 +806,8 @@ static int set_mode(struct tuner *t, enum v4l2_tuner_type mode) if (mode != t->mode) { if (check_mode(t, mode) == -EINVAL) { - tuner_dbg("Tuner doesn't support mode %d. " - "Putting tuner to sleep\n", mode); + tuner_dbg("Tuner doesn't support mode %d. Putting tuner to sleep\n", + mode); t->standby = true; if (analog_ops->standby) analog_ops->standby(&t->fe); diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index adc2147fcff7..47001e25fd9e 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -885,6 +885,7 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_LINK_FREQ: return "Link Frequency"; case V4L2_CID_PIXEL_RATE: return "Pixel Rate"; case V4L2_CID_TEST_PATTERN: return "Test Pattern"; + case V4L2_CID_DEINTERLACING_MODE: return "Deinterlacing Mode"; /* DV controls */ /* Keep the order of the 'case's the same as in v4l2-controls.h! */ @@ -1058,6 +1059,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_DV_RX_RGB_RANGE: case V4L2_CID_DV_RX_IT_CONTENT_TYPE: case V4L2_CID_TEST_PATTERN: + case V4L2_CID_DEINTERLACING_MODE: case V4L2_CID_TUNE_DEEMPHASIS: case V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL: case V4L2_CID_DETECT_MD_MODE: diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c index 730a7c392c1d..5c8c49d240d1 100644 --- a/drivers/media/v4l2-core/v4l2-dv-timings.c +++ b/drivers/media/v4l2-core/v4l2-dv-timings.c @@ -22,6 +22,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/errno.h> +#include <linux/rational.h> #include <linux/videodev2.h> #include <linux/v4l2-dv-timings.h> #include <media/v4l2-dv-timings.h> @@ -224,6 +225,24 @@ bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t, } EXPORT_SYMBOL_GPL(v4l2_find_dv_timings_cap); +bool v4l2_find_dv_timings_cea861_vic(struct v4l2_dv_timings *t, u8 vic) +{ + unsigned int i; + + for (i = 0; i < v4l2_dv_timings_presets[i].bt.width; i++) { + const struct v4l2_bt_timings *bt = + &v4l2_dv_timings_presets[i].bt; + + if ((bt->flags & V4L2_DV_FL_HAS_CEA861_VIC) && + bt->cea861_vic == vic) { + *t = v4l2_dv_timings_presets[i]; + return true; + } + } + return false; +} +EXPORT_SYMBOL_GPL(v4l2_find_dv_timings_cea861_vic); + /** * v4l2_match_dv_timings - check if two timings match * @t1 - compare this v4l2_dv_timings struct... @@ -306,7 +325,8 @@ void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix, (bt->polarities & V4L2_DV_VSYNC_POS_POL) ? "+" : "-", bt->il_vsync, bt->il_vbackporch); pr_info("%s: pixelclock: %llu\n", dev_prefix, bt->pixelclock); - pr_info("%s: flags (0x%x):%s%s%s%s%s%s%s\n", dev_prefix, bt->flags, + pr_info("%s: flags (0x%x):%s%s%s%s%s%s%s%s%s%s\n", + dev_prefix, bt->flags, (bt->flags & V4L2_DV_FL_REDUCED_BLANKING) ? " REDUCED_BLANKING" : "", ((bt->flags & V4L2_DV_FL_REDUCED_BLANKING) && @@ -320,16 +340,51 @@ void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix, (bt->flags & V4L2_DV_FL_IS_CE_VIDEO) ? " CE_VIDEO" : "", (bt->flags & V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE) ? - " FIRST_FIELD_EXTRA_LINE" : ""); + " FIRST_FIELD_EXTRA_LINE" : "", + (bt->flags & V4L2_DV_FL_HAS_PICTURE_ASPECT) ? + " HAS_PICTURE_ASPECT" : "", + (bt->flags & V4L2_DV_FL_HAS_CEA861_VIC) ? + " HAS_CEA861_VIC" : "", + (bt->flags & V4L2_DV_FL_HAS_HDMI_VIC) ? + " HAS_HDMI_VIC" : ""); pr_info("%s: standards (0x%x):%s%s%s%s%s\n", dev_prefix, bt->standards, (bt->standards & V4L2_DV_BT_STD_CEA861) ? " CEA" : "", (bt->standards & V4L2_DV_BT_STD_DMT) ? " DMT" : "", (bt->standards & V4L2_DV_BT_STD_CVT) ? " CVT" : "", (bt->standards & V4L2_DV_BT_STD_GTF) ? " GTF" : "", (bt->standards & V4L2_DV_BT_STD_SDI) ? " SDI" : ""); + if (bt->flags & V4L2_DV_FL_HAS_PICTURE_ASPECT) + pr_info("%s: picture aspect (hor:vert): %u:%u\n", dev_prefix, + bt->picture_aspect.numerator, + bt->picture_aspect.denominator); + if (bt->flags & V4L2_DV_FL_HAS_CEA861_VIC) + pr_info("%s: CEA-861 VIC: %u\n", dev_prefix, bt->cea861_vic); + if (bt->flags & V4L2_DV_FL_HAS_HDMI_VIC) + pr_info("%s: HDMI VIC: %u\n", dev_prefix, bt->hdmi_vic); } EXPORT_SYMBOL_GPL(v4l2_print_dv_timings); +struct v4l2_fract v4l2_dv_timings_aspect_ratio(const struct v4l2_dv_timings *t) +{ + struct v4l2_fract ratio = { 1, 1 }; + unsigned long n, d; + + if (t->type != V4L2_DV_BT_656_1120) + return ratio; + if (!(t->bt.flags & V4L2_DV_FL_HAS_PICTURE_ASPECT)) + return ratio; + + ratio.numerator = t->bt.width * t->bt.picture_aspect.denominator; + ratio.denominator = t->bt.height * t->bt.picture_aspect.numerator; + + rational_best_approximation(ratio.numerator, ratio.denominator, + ratio.numerator, ratio.denominator, &n, &d); + ratio.numerator = n; + ratio.denominator = d; + return ratio; +} +EXPORT_SYMBOL_GPL(v4l2_dv_timings_aspect_ratio); + /* * CVT defines * Based on Coordinated Video Timings Standard diff --git a/drivers/media/v4l2-core/v4l2-flash-led-class.c b/drivers/media/v4l2-core/v4l2-flash-led-class.c index ae7544d5469a..794e563f24f8 100644 --- a/drivers/media/v4l2-core/v4l2-flash-led-class.c +++ b/drivers/media/v4l2-core/v4l2-flash-led-class.c @@ -638,7 +638,7 @@ struct v4l2_flash *v4l2_flash_init( v4l2_flash->iled_cdev = iled_cdev; v4l2_flash->ops = ops; sd->dev = dev; - sd->of_node = of_node; + sd->of_node = of_node ? of_node : led_cdev->dev->of_node; v4l2_subdev_init(sd, &v4l2_flash_subdev_ops); sd->internal_ops = &v4l2_flash_subdev_internal_ops; sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; @@ -654,10 +654,7 @@ struct v4l2_flash *v4l2_flash_init( if (ret < 0) goto err_init_controls; - if (sd->of_node) - of_node_get(sd->of_node); - else - of_node_get(led_cdev->dev->of_node); + of_node_get(sd->of_node); ret = v4l2_async_register_subdev(sd); if (ret < 0) @@ -666,7 +663,7 @@ struct v4l2_flash *v4l2_flash_init( return v4l2_flash; err_async_register_sd: - of_node_put(led_cdev->dev->of_node); + of_node_put(sd->of_node); v4l2_ctrl_handler_free(sd->ctrl_handler); err_init_controls: media_entity_cleanup(&sd->entity); @@ -678,20 +675,15 @@ EXPORT_SYMBOL_GPL(v4l2_flash_init); void v4l2_flash_release(struct v4l2_flash *v4l2_flash) { struct v4l2_subdev *sd; - struct led_classdev *led_cdev; if (IS_ERR_OR_NULL(v4l2_flash)) return; sd = &v4l2_flash->sd; - led_cdev = &v4l2_flash->fled_cdev->led_cdev; v4l2_async_unregister_subdev(sd); - if (sd->of_node) - of_node_put(sd->of_node); - else - of_node_put(led_cdev->dev->of_node); + of_node_put(sd->of_node); v4l2_ctrl_handler_free(sd->ctrl_handler); media_entity_cleanup(&sd->entity); diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index c52d94c018bb..181381d1dc77 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -174,8 +174,7 @@ static void v4l_print_querycap(const void *arg, bool write_only) { const struct v4l2_capability *p = arg; - pr_cont("driver=%.*s, card=%.*s, bus=%.*s, version=0x%08x, " - "capabilities=0x%08x, device_caps=0x%08x\n", + pr_cont("driver=%.*s, card=%.*s, bus=%.*s, version=0x%08x, capabilities=0x%08x, device_caps=0x%08x\n", (int)sizeof(p->driver), p->driver, (int)sizeof(p->card), p->card, (int)sizeof(p->bus_info), p->bus_info, @@ -186,8 +185,7 @@ static void v4l_print_enuminput(const void *arg, bool write_only) { const struct v4l2_input *p = arg; - pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, tuner=%u, " - "std=0x%08Lx, status=0x%x, capabilities=0x%x\n", + pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, tuner=%u, std=0x%08Lx, status=0x%x, capabilities=0x%x\n", p->index, (int)sizeof(p->name), p->name, p->type, p->audioset, p->tuner, (unsigned long long)p->std, p->status, p->capabilities); @@ -197,8 +195,7 @@ static void v4l_print_enumoutput(const void *arg, bool write_only) { const struct v4l2_output *p = arg; - pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, " - "modulator=%u, std=0x%08Lx, capabilities=0x%x\n", + pr_cont("index=%u, name=%.*s, type=%u, audioset=0x%x, modulator=%u, std=0x%08Lx, capabilities=0x%x\n", p->index, (int)sizeof(p->name), p->name, p->type, p->audioset, p->modulator, (unsigned long long)p->std, p->capabilities); } @@ -256,11 +253,7 @@ static void v4l_print_format(const void *arg, bool write_only) case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: pix = &p->fmt.pix; - pr_cont(", width=%u, height=%u, " - "pixelformat=%c%c%c%c, field=%s, " - "bytesperline=%u, sizeimage=%u, colorspace=%d, " - "flags=0x%x, ycbcr_enc=%u, quantization=%u, " - "xfer_func=%u\n", + pr_cont(", width=%u, height=%u, pixelformat=%c%c%c%c, field=%s, bytesperline=%u, sizeimage=%u, colorspace=%d, flags=0x%x, ycbcr_enc=%u, quantization=%u, xfer_func=%u\n", pix->width, pix->height, (pix->pixelformat & 0xff), (pix->pixelformat >> 8) & 0xff, @@ -274,10 +267,7 @@ static void v4l_print_format(const void *arg, bool write_only) case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: mp = &p->fmt.pix_mp; - pr_cont(", width=%u, height=%u, " - "format=%c%c%c%c, field=%s, " - "colorspace=%d, num_planes=%u, flags=0x%x, " - "ycbcr_enc=%u, quantization=%u, xfer_func=%u\n", + pr_cont(", width=%u, height=%u, format=%c%c%c%c, field=%s, colorspace=%d, num_planes=%u, flags=0x%x, ycbcr_enc=%u, quantization=%u, xfer_func=%u\n", mp->width, mp->height, (mp->pixelformat & 0xff), (mp->pixelformat >> 8) & 0xff, @@ -306,8 +296,7 @@ static void v4l_print_format(const void *arg, bool write_only) case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: vbi = &p->fmt.vbi; - pr_cont(", sampling_rate=%u, offset=%u, samples_per_line=%u, " - "sample_format=%c%c%c%c, start=%u,%u, count=%u,%u\n", + pr_cont(", sampling_rate=%u, offset=%u, samples_per_line=%u, sample_format=%c%c%c%c, start=%u,%u, count=%u,%u\n", vbi->sampling_rate, vbi->offset, vbi->samples_per_line, (vbi->sample_format & 0xff), @@ -343,9 +332,7 @@ static void v4l_print_framebuffer(const void *arg, bool write_only) { const struct v4l2_framebuffer *p = arg; - pr_cont("capability=0x%x, flags=0x%x, base=0x%p, width=%u, " - "height=%u, pixelformat=%c%c%c%c, " - "bytesperline=%u, sizeimage=%u, colorspace=%d\n", + pr_cont("capability=0x%x, flags=0x%x, base=0x%p, width=%u, height=%u, pixelformat=%c%c%c%c, bytesperline=%u, sizeimage=%u, colorspace=%d\n", p->capability, p->flags, p->base, p->fmt.width, p->fmt.height, (p->fmt.pixelformat & 0xff), @@ -368,8 +355,7 @@ static void v4l_print_modulator(const void *arg, bool write_only) if (write_only) pr_cont("index=%u, txsubchans=0x%x\n", p->index, p->txsubchans); else - pr_cont("index=%u, name=%.*s, capability=0x%x, " - "rangelow=%u, rangehigh=%u, txsubchans=0x%x\n", + pr_cont("index=%u, name=%.*s, capability=0x%x, rangelow=%u, rangehigh=%u, txsubchans=0x%x\n", p->index, (int)sizeof(p->name), p->name, p->capability, p->rangelow, p->rangehigh, p->txsubchans); } @@ -381,9 +367,7 @@ static void v4l_print_tuner(const void *arg, bool write_only) if (write_only) pr_cont("index=%u, audmode=%u\n", p->index, p->audmode); else - pr_cont("index=%u, name=%.*s, type=%u, capability=0x%x, " - "rangelow=%u, rangehigh=%u, signal=%u, afc=%d, " - "rxsubchans=0x%x, audmode=%u\n", + pr_cont("index=%u, name=%.*s, type=%u, capability=0x%x, rangelow=%u, rangehigh=%u, signal=%u, afc=%d, rxsubchans=0x%x, audmode=%u\n", p->index, (int)sizeof(p->name), p->name, p->type, p->capability, p->rangelow, p->rangehigh, p->signal, p->afc, @@ -402,8 +386,8 @@ static void v4l_print_standard(const void *arg, bool write_only) { const struct v4l2_standard *p = arg; - pr_cont("index=%u, id=0x%Lx, name=%.*s, fps=%u/%u, " - "framelines=%u\n", p->index, + pr_cont("index=%u, id=0x%Lx, name=%.*s, fps=%u/%u, framelines=%u\n", + p->index, (unsigned long long)p->id, (int)sizeof(p->name), p->name, p->frameperiod.numerator, p->frameperiod.denominator, @@ -419,8 +403,7 @@ static void v4l_print_hw_freq_seek(const void *arg, bool write_only) { const struct v4l2_hw_freq_seek *p = arg; - pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u, " - "rangelow=%u, rangehigh=%u\n", + pr_cont("tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u, rangelow=%u, rangehigh=%u\n", p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing, p->rangelow, p->rangehigh); } @@ -442,8 +425,7 @@ static void v4l_print_buffer(const void *arg, bool write_only) const struct v4l2_plane *plane; int i; - pr_cont("%02ld:%02d:%02d.%08ld index=%d, type=%s, " - "flags=0x%08x, field=%s, sequence=%d, memory=%s", + pr_cont("%02ld:%02d:%02d.%08ld index=%d, type=%s, flags=0x%08x, field=%s, sequence=%d, memory=%s", p->timestamp.tv_sec / 3600, (int)(p->timestamp.tv_sec / 60) % 60, (int)(p->timestamp.tv_sec % 60), @@ -458,8 +440,7 @@ static void v4l_print_buffer(const void *arg, bool write_only) for (i = 0; i < p->length; ++i) { plane = &p->m.planes[i]; printk(KERN_DEBUG - "plane %d: bytesused=%d, data_offset=0x%08x, " - "offset/userptr=0x%lx, length=%d\n", + "plane %d: bytesused=%d, data_offset=0x%08x, offset/userptr=0x%lx, length=%d\n", i, plane->bytesused, plane->data_offset, plane->m.userptr, plane->length); } @@ -468,8 +449,7 @@ static void v4l_print_buffer(const void *arg, bool write_only) p->bytesused, p->m.userptr, p->length); } - printk(KERN_DEBUG "timecode=%02d:%02d:%02d type=%d, " - "flags=0x%08x, frames=%d, userbits=0x%08x\n", + printk(KERN_DEBUG "timecode=%02d:%02d:%02d type=%d, flags=0x%08x, frames=%d, userbits=0x%08x\n", tc->hours, tc->minutes, tc->seconds, tc->type, tc->flags, tc->frames, *(__u32 *)tc->userbits); } @@ -503,8 +483,7 @@ static void v4l_print_streamparm(const void *arg, bool write_only) p->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { const struct v4l2_captureparm *c = &p->parm.capture; - pr_cont(", capability=0x%x, capturemode=0x%x, timeperframe=%d/%d, " - "extendedmode=%d, readbuffers=%d\n", + pr_cont(", capability=0x%x, capturemode=0x%x, timeperframe=%d/%d, extendedmode=%d, readbuffers=%d\n", c->capability, c->capturemode, c->timeperframe.numerator, c->timeperframe.denominator, c->extendedmode, c->readbuffers); @@ -512,8 +491,7 @@ static void v4l_print_streamparm(const void *arg, bool write_only) p->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { const struct v4l2_outputparm *c = &p->parm.output; - pr_cont(", capability=0x%x, outputmode=0x%x, timeperframe=%d/%d, " - "extendedmode=%d, writebuffers=%d\n", + pr_cont(", capability=0x%x, outputmode=0x%x, timeperframe=%d/%d, extendedmode=%d, writebuffers=%d\n", c->capability, c->outputmode, c->timeperframe.numerator, c->timeperframe.denominator, c->extendedmode, c->writebuffers); @@ -526,8 +504,7 @@ static void v4l_print_queryctrl(const void *arg, bool write_only) { const struct v4l2_queryctrl *p = arg; - pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%d/%d, " - "step=%d, default=%d, flags=0x%08x\n", + pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%d/%d, step=%d, default=%d, flags=0x%08x\n", p->id, p->type, (int)sizeof(p->name), p->name, p->minimum, p->maximum, p->step, p->default_value, p->flags); @@ -537,9 +514,7 @@ static void v4l_print_query_ext_ctrl(const void *arg, bool write_only) { const struct v4l2_query_ext_ctrl *p = arg; - pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%lld/%lld, " - "step=%lld, default=%lld, flags=0x%08x, elem_size=%u, elems=%u, " - "nr_of_dims=%u, dims=%u,%u,%u,%u\n", + pr_cont("id=0x%x, type=%d, name=%.*s, min/max=%lld/%lld, step=%lld, default=%lld, flags=0x%08x, elem_size=%u, elems=%u, nr_of_dims=%u, dims=%u,%u,%u,%u\n", p->id, p->type, (int)sizeof(p->name), p->name, p->minimum, p->maximum, p->step, p->default_value, p->flags, @@ -583,9 +558,7 @@ static void v4l_print_cropcap(const void *arg, bool write_only) { const struct v4l2_cropcap *p = arg; - pr_cont("type=%s, bounds wxh=%dx%d, x,y=%d,%d, " - "defrect wxh=%dx%d, x,y=%d,%d, " - "pixelaspect %d/%d\n", + pr_cont("type=%s, bounds wxh=%dx%d, x,y=%d,%d, defrect wxh=%dx%d, x,y=%d,%d, pixelaspect %d/%d\n", prt_names(p->type, v4l2_type_names), p->bounds.width, p->bounds.height, p->bounds.left, p->bounds.top, @@ -618,8 +591,7 @@ static void v4l_print_jpegcompression(const void *arg, bool write_only) { const struct v4l2_jpegcompression *p = arg; - pr_cont("quality=%d, APPn=%d, APP_len=%d, " - "COM_len=%d, jpeg_markers=0x%x\n", + pr_cont("quality=%d, APPn=%d, APP_len=%d, COM_len=%d, jpeg_markers=0x%x\n", p->quality, p->APPn, p->APP_len, p->COM_len, p->jpeg_markers); } @@ -686,14 +658,7 @@ static void v4l_print_dv_timings(const void *arg, bool write_only) switch (p->type) { case V4L2_DV_BT_656_1120: - pr_cont("type=bt-656/1120, interlaced=%u, " - "pixelclock=%llu, " - "width=%u, height=%u, polarities=0x%x, " - "hfrontporch=%u, hsync=%u, " - "hbackporch=%u, vfrontporch=%u, " - "vsync=%u, vbackporch=%u, " - "il_vfrontporch=%u, il_vsync=%u, " - "il_vbackporch=%u, standards=0x%x, flags=0x%x\n", + pr_cont("type=bt-656/1120, interlaced=%u, pixelclock=%llu, width=%u, height=%u, polarities=0x%x, hfrontporch=%u, hsync=%u, hbackporch=%u, vfrontporch=%u, vsync=%u, vbackporch=%u, il_vfrontporch=%u, il_vsync=%u, il_vbackporch=%u, standards=0x%x, flags=0x%x\n", p->bt.interlaced, p->bt.pixelclock, p->bt.width, p->bt.height, p->bt.polarities, p->bt.hfrontporch, @@ -723,8 +688,7 @@ static void v4l_print_dv_timings_cap(const void *arg, bool write_only) switch (p->type) { case V4L2_DV_BT_656_1120: - pr_cont("type=bt-656/1120, width=%u-%u, height=%u-%u, " - "pixelclock=%llu-%llu, standards=0x%x, capabilities=0x%x\n", + pr_cont("type=bt-656/1120, width=%u-%u, height=%u-%u, pixelclock=%llu-%llu, standards=0x%x, capabilities=0x%x\n", p->bt.min_width, p->bt.max_width, p->bt.min_height, p->bt.max_height, p->bt.min_pixelclock, p->bt.max_pixelclock, @@ -805,8 +769,7 @@ static void v4l_print_event(const void *arg, bool write_only) const struct v4l2_event *p = arg; const struct v4l2_event_ctrl *c; - pr_cont("type=0x%x, pending=%u, sequence=%u, id=%u, " - "timestamp=%lu.%9.9lu\n", + pr_cont("type=0x%x, pending=%u, sequence=%u, id=%u, timestamp=%lu.%9.9lu\n", p->type, p->pending, p->sequence, p->id, p->timestamp.tv_sec, p->timestamp.tv_nsec); switch (p->type) { @@ -822,8 +785,7 @@ static void v4l_print_event(const void *arg, bool write_only) pr_cont("value64=%lld, ", c->value64); else pr_cont("value=%d, ", c->value); - pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d, " - "default_value=%d\n", + pr_cont("flags=0x%x, minimum=%d, maximum=%d, step=%d, default_value=%d\n", c->flags, c->minimum, c->maximum, c->step, c->default_value); break; @@ -859,8 +821,7 @@ static void v4l_print_freq_band(const void *arg, bool write_only) { const struct v4l2_frequency_band *p = arg; - pr_cont("tuner=%u, type=%u, index=%u, capability=0x%x, " - "rangelow=%u, rangehigh=%u, modulation=0x%x\n", + pr_cont("tuner=%u, type=%u, index=%u, capability=0x%x, rangelow=%u, rangehigh=%u, modulation=0x%x\n", p->tuner, p->type, p->index, p->capability, p->rangelow, p->rangehigh, p->modulation); @@ -1239,6 +1200,8 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) case V4L2_PIX_FMT_TM6000: descr = "A/V + VBI Mux Packet"; break; case V4L2_PIX_FMT_CIT_YYVYUY: descr = "GSPCA CIT YYVYUY"; break; case V4L2_PIX_FMT_KONICA420: descr = "GSPCA KONICA420"; break; + case V4L2_PIX_FMT_HSV24: descr = "24-bit HSV 8-8-8"; break; + case V4L2_PIX_FMT_HSV32: descr = "32-bit XHSV 8-8-8-8"; break; case V4L2_SDR_FMT_CU8: descr = "Complex U8"; break; case V4L2_SDR_FMT_CU16LE: descr = "Complex U16LE"; break; case V4L2_SDR_FMT_CS8: descr = "Complex S8"; break; @@ -1269,6 +1232,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) case V4L2_PIX_FMT_VC1_ANNEX_G: descr = "VC-1 (SMPTE 412M Annex G)"; break; case V4L2_PIX_FMT_VC1_ANNEX_L: descr = "VC-1 (SMPTE 412M Annex L)"; break; case V4L2_PIX_FMT_VP8: descr = "VP8"; break; + case V4L2_PIX_FMT_VP9: descr = "VP9"; break; case V4L2_PIX_FMT_CPIA1: descr = "GSPCA CPiA YUV"; break; case V4L2_PIX_FMT_WNVA: descr = "WNVA"; break; case V4L2_PIX_FMT_SN9C10X: descr = "GSPCA SN9C10X"; break; @@ -1287,6 +1251,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) case V4L2_PIX_FMT_JPGL: descr = "JPEG Lite"; break; case V4L2_PIX_FMT_SE401: descr = "GSPCA SE401"; break; case V4L2_PIX_FMT_S5C_UYVY_JPG: descr = "S5C73MX interleaved UYVY/JPEG"; break; + case V4L2_PIX_FMT_MT21C: descr = "Mediatek Compressed Format"; break; default: WARN(1, "Unknown pixelformat 0x%08x\n", fmt->pixelformat); if (fmt->description[0]) diff --git a/drivers/media/v4l2-core/videobuf-core.c b/drivers/media/v4l2-core/videobuf-core.c index def84753c4c3..1dbf6f7785bb 100644 --- a/drivers/media/v4l2-core/videobuf-core.c +++ b/drivers/media/v4l2-core/videobuf-core.c @@ -572,8 +572,7 @@ int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b) switch (b->memory) { case V4L2_MEMORY_MMAP: if (0 == buf->baddr) { - dprintk(1, "qbuf: mmap requested " - "but buffer addr is zero!\n"); + dprintk(1, "qbuf: mmap requested but buffer addr is zero!\n"); goto done; } if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 21900202ff83..7c1d390ea438 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -358,8 +358,8 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, if (memory == VB2_MEMORY_MMAP) { ret = __vb2_buf_mem_alloc(vb); if (ret) { - dprintk(1, "failed allocating memory for " - "buffer %d\n", buffer); + dprintk(1, "failed allocating memory for buffer %d\n", + buffer); q->bufs[vb->index] = NULL; kfree(vb); break; @@ -372,8 +372,8 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, */ ret = call_vb_qop(vb, buf_init, vb); if (ret) { - dprintk(1, "buffer %d %p initialization" - " failed\n", buffer, vb); + dprintk(1, "buffer %d %p initialization failed\n", + buffer, vb); __vb2_buf_mem_free(vb); q->bufs[vb->index] = NULL; kfree(vb); @@ -997,13 +997,12 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb) && vb->planes[plane].length == planes[plane].length) continue; - dprintk(3, "userspace address for plane %d changed, " - "reacquiring memory\n", plane); + dprintk(3, "userspace address for plane %d changed, reacquiring memory\n", + plane); /* Check if the provided plane buffer is large enough */ if (planes[plane].length < vb->planes[plane].min_length) { - dprintk(1, "provided buffer size %u is less than " - "setup size %u for plane %d\n", + dprintk(1, "provided buffer size %u is less than setup size %u for plane %d\n", planes[plane].length, vb->planes[plane].min_length, plane); @@ -1032,8 +1031,8 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb) planes[plane].m.userptr, planes[plane].length, dma_dir); if (IS_ERR(mem_priv)) { - dprintk(1, "failed acquiring userspace " - "memory for plane %d\n", plane); + dprintk(1, "failed acquiring userspace memory for plane %d\n", + plane); ret = PTR_ERR(mem_priv); goto err; } @@ -1123,8 +1122,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const void *pb) planes[plane].length = dbuf->size; if (planes[plane].length < vb->planes[plane].min_length) { - dprintk(1, "invalid dmabuf length %u for plane %d, " - "minimum length %u\n", + dprintk(1, "invalid dmabuf length %u for plane %d, minimum length %u\n", planes[plane].length, plane, vb->planes[plane].min_length); dma_buf_put(dbuf); @@ -1472,8 +1470,7 @@ static int __vb2_wait_for_done_vb(struct vb2_queue *q, int nonblocking) } if (nonblocking) { - dprintk(1, "nonblocking and no buffers to dequeue, " - "will not wait\n"); + dprintk(1, "nonblocking and no buffers to dequeue, will not wait\n"); return -EAGAIN; } diff --git a/drivers/media/v4l2-core/videobuf2-v4l2.c b/drivers/media/v4l2-core/videobuf2-v4l2.c index 52ef8833f6b6..3529849d2218 100644 --- a/drivers/media/v4l2-core/videobuf2-v4l2.c +++ b/drivers/media/v4l2-core/videobuf2-v4l2.c @@ -60,14 +60,13 @@ static int __verify_planes_array(struct vb2_buffer *vb, const struct v4l2_buffer /* Is memory for copying plane information present? */ if (b->m.planes == NULL) { - dprintk(1, "multi-planar buffer passed but " - "planes array not provided\n"); + dprintk(1, "multi-planar buffer passed but planes array not provided\n"); return -EINVAL; } if (b->length < vb->num_planes || b->length > VB2_MAX_PLANES) { - dprintk(1, "incorrect planes array length, " - "expected %d, got %d\n", vb->num_planes, b->length); + dprintk(1, "incorrect planes array length, expected %d, got %d\n", + vb->num_planes, b->length); return -EINVAL; } @@ -316,8 +315,7 @@ static int __fill_vb2_buffer(struct vb2_buffer *vb, * that just says that it is either a top or a bottom field, * but not which of the two it is. */ - dprintk(1, "the field is incorrectly set to ALTERNATE " - "for an output buffer\n"); + dprintk(1, "the field is incorrectly set to ALTERNATE for an output buffer\n"); return -EINVAL; } vb->timestamp = 0; diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c index ab3227b75c84..3f778147cdef 100644 --- a/drivers/media/v4l2-core/videobuf2-vmalloc.c +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c @@ -151,8 +151,7 @@ static void *vb2_vmalloc_vaddr(void *buf_priv) struct vb2_vmalloc_buf *buf = buf_priv; if (!buf->vaddr) { - pr_err("Address of an unallocated plane requested " - "or cannot map user pointer\n"); + pr_err("Address of an unallocated plane requested or cannot map user pointer\n"); return NULL; } diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig index 6620d96ee44d..ffb8fa72c3da 100644 --- a/drivers/staging/media/Kconfig +++ b/drivers/staging/media/Kconfig @@ -21,16 +21,12 @@ if STAGING_MEDIA && MEDIA_SUPPORT # Please keep them in alphabetic order source "drivers/staging/media/bcm2048/Kconfig" -source "drivers/staging/media/cec/Kconfig" - source "drivers/staging/media/cxd2099/Kconfig" source "drivers/staging/media/davinci_vpfe/Kconfig" source "drivers/staging/media/omap4iss/Kconfig" -source "drivers/staging/media/pulse8-cec/Kconfig" - source "drivers/staging/media/s5p-cec/Kconfig" # Keep LIRC at the end, as it has sub-menus diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile index 906257e94dda..a28e82cf6447 100644 --- a/drivers/staging/media/Makefile +++ b/drivers/staging/media/Makefile @@ -1,9 +1,7 @@ obj-$(CONFIG_I2C_BCM2048) += bcm2048/ -obj-$(CONFIG_MEDIA_CEC) += cec/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC) += s5p-cec/ obj-$(CONFIG_DVB_CXD2099) += cxd2099/ obj-$(CONFIG_LIRC_STAGING) += lirc/ obj-$(CONFIG_VIDEO_DM365_VPFE) += davinci_vpfe/ obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ -obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec/ obj-$(CONFIG_VIDEO_STI_HDMI_CEC) += st-cec/ diff --git a/drivers/staging/media/bcm2048/radio-bcm2048.h b/drivers/staging/media/bcm2048/radio-bcm2048.h index 4c90a32db795..4d950c1e2e8b 100644 --- a/drivers/staging/media/bcm2048/radio-bcm2048.h +++ b/drivers/staging/media/bcm2048/radio-bcm2048.h @@ -14,11 +14,6 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #ifndef BCM2048_H diff --git a/drivers/staging/media/cec/Kconfig b/drivers/staging/media/cec/Kconfig deleted file mode 100644 index 6e12d41b1f86..000000000000 --- a/drivers/staging/media/cec/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -config MEDIA_CEC - bool "CEC API (EXPERIMENTAL)" - depends on MEDIA_SUPPORT - select MEDIA_CEC_EDID - ---help--- - Enable the CEC API. - -config MEDIA_CEC_DEBUG - bool "CEC debugfs interface (EXPERIMENTAL)" - depends on MEDIA_CEC && DEBUG_FS - ---help--- - Turns on the DebugFS interface for CEC devices. diff --git a/drivers/staging/media/cec/TODO b/drivers/staging/media/cec/TODO deleted file mode 100644 index 13224694a8ae..000000000000 --- a/drivers/staging/media/cec/TODO +++ /dev/null @@ -1,32 +0,0 @@ -The reason why cec.c is still in staging is that I would like -to have a bit more confidence in the uABI. The kABI is fine, -no problem there, but I would like to let the public API mature -a bit. - -Once I'm confident that I didn't miss anything then the cec.c source -can move to drivers/media and the linux/cec.h and linux/cec-funcs.h -headers can move to uapi/linux and added to uapi/linux/Kbuild to make -them public. - -Hopefully this will happen later in 2016. - -Other TODOs: - -- There are two possible replies to CEC_MSG_INITIATE_ARC. How to handle that? -- Add a flag to inhibit passing CEC RC messages to the rc subsystem. - Applications should be able to choose this when calling S_LOG_ADDRS. -- If the reply field of cec_msg is set then when the reply arrives it - is only sent to the filehandle that transmitted the original message - and not to any followers. Should this behavior change or perhaps - controlled through a cec_msg flag? -- Should CEC_LOG_ADDR_TYPE_SPECIFIC be replaced by TYPE_2ND_TV and TYPE_PROCESSOR? - And also TYPE_SWITCH and TYPE_CDC_ONLY in addition to the TYPE_UNREGISTERED? - This should give the framework more information about the device type - since SPECIFIC and UNREGISTERED give no useful information. -- Once this is out of staging this should no longer be a separate - config option, instead it should be selected by drivers that want it. -- Revisit the IS_REACHABLE(RC_CORE): perhaps the RC_CORE support should - be enabled through a separate config option in drivers/media/Kconfig - or rc/Kconfig? - -Hans Verkuil <hans.verkuil@cisco.com> diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c index 198a8057f2f1..00e00b0be275 100644 --- a/drivers/staging/media/lirc/lirc_imon.c +++ b/drivers/staging/media/lirc/lirc_imon.c @@ -334,7 +334,7 @@ static int send_packet(struct imon_context *context) context->tx_urb->actual_length = 0; - init_completion(&context->tx.finished); + reinit_completion(&context->tx.finished); atomic_set(&context->tx.busy, 1); retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); @@ -497,6 +497,8 @@ static int ir_open(void *data) context->rx.initial_space = 1; context->rx.prev_bit = 0; + init_completion(&context->tx.finished); + context->ir_isopen = 1; dev_info(context->driver->dev, "IR port opened\n"); @@ -930,7 +932,7 @@ static void imon_disconnect(struct usb_interface *interface) /* Abort ongoing write */ if (atomic_read(&context->tx.busy)) { usb_kill_urb(context->tx_urb); - complete_all(&context->tx.finished); + complete(&context->tx.finished); } context->dev_present = 0; diff --git a/drivers/staging/media/pulse8-cec/TODO b/drivers/staging/media/pulse8-cec/TODO deleted file mode 100644 index fa6660245e5f..000000000000 --- a/drivers/staging/media/pulse8-cec/TODO +++ /dev/null @@ -1,52 +0,0 @@ -This driver needs to mature a bit more and another round of -code cleanups. - -Otherwise it looks to be in good shape. And of course the fact -that the CEC framework is in staging at the moment also prevents -this driver from being mainlined. - -Some notes: - -1) Regarding the "autonomous" mode of the Pulse-Eight: currently this -is disabled, but the idea is that this allows basic functionality -when the PC is off, and it can wake-up the PC through USB. - -To prevent the device to go into autonomous mode the driver would -have to send MSGCODE_SET_CONTROLLED 1 and then send a ping every -30 seconds (in practice once every 15 seconds would be good). When -powering off or going to standby send MSGCODE_SET_CONTROLLED 0 to -turn the autonomous mode back on. - -This needs to be implemented in the driver. Autonomous mode was -added in firmware v2. - -2) Writing to the EEPROM can only be done once every 10 seconds. - -3) To use this driver you also need to patch the inputattach utility, -this patch will be submitted once this driver is moved out of staging. - -diff -urN linuxconsoletools-1.4.9/utils/inputattach.c linuxconsoletools-1.4.9.new/utils/inputattach.c ---- linuxconsoletools-1.4.9/utils/inputattach.c 2016-01-09 16:27:02.000000000 +0100 -+++ linuxconsoletools-1.4.9.new/utils/inputattach.c 2016-03-20 11:35:31.707788967 +0100 -@@ -861,6 +861,9 @@ - { "--wacom_iv", "-wacom_iv", "Wacom protocol IV tablet", - B9600, CS8 | CRTSCTS, - SERIO_WACOM_IV, 0x00, 0x00, 0, wacom_iv_init }, -+{ "--pulse8-cec", "-pulse8-cec", "Pulse Eight HDMI CEC dongle", -+ B9600, CS8, -+ SERIO_PULSE8_CEC, 0x00, 0x00, 0, NULL }, - { NULL, NULL, NULL, 0, 0, 0, 0, 0, 0, NULL } - }; - -diff -urN linuxconsoletools-1.4.9/utils/serio-ids.h linuxconsoletools-1.4.9.new/utils/serio-ids.h ---- linuxconsoletools-1.4.9/utils/serio-ids.h 2015-04-26 18:29:42.000000000 +0200 -+++ linuxconsoletools-1.4.9.new/utils/serio-ids.h 2016-03-20 11:41:00.153558539 +0100 -@@ -131,5 +131,8 @@ - #ifndef SERIO_EASYPEN - # define SERIO_EASYPEN 0x3f - #endif -+#ifndef SERIO_PULSE8_CEC -+# define SERIO_PULSE8_CEC 0x40 -+#endif - - #endif diff --git a/drivers/staging/media/s5p-cec/Kconfig b/drivers/staging/media/s5p-cec/Kconfig index 0315fd7ad0f1..ddfd955da0d4 100644 --- a/drivers/staging/media/s5p-cec/Kconfig +++ b/drivers/staging/media/s5p-cec/Kconfig @@ -1,6 +1,6 @@ config VIDEO_SAMSUNG_S5P_CEC tristate "Samsung S5P CEC driver" - depends on VIDEO_DEV && MEDIA_CEC && (PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST) + depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST) ---help--- This is a driver for Samsung S5P HDMI CEC interface. It uses the generic CEC framework interface. diff --git a/drivers/staging/media/s5p-cec/TODO b/drivers/staging/media/s5p-cec/TODO index f51d5268ac40..64f21bab38f5 100644 --- a/drivers/staging/media/s5p-cec/TODO +++ b/drivers/staging/media/s5p-cec/TODO @@ -1,7 +1,7 @@ -This driver depends on the CEC framework, which is currently in -staging, so therefor this driver is in staging as well. +This driver requires that userspace sets the physical address. +However, this should be passed on from the corresponding +Samsung HDMI driver. -In addition, this driver requires that userspace sets the physical -address. However, this should be passed on from the corresponding -samsung HDMI driver. It is very annoying if userspace has to do this, -and other than USB CEC adapters this must be handled automatically. +We have to wait until the HDMI notifier framework has been merged +in order to handle this gracefully, until that time this driver +has to remain in staging. diff --git a/drivers/staging/media/s5p-cec/s5p_cec.c b/drivers/staging/media/s5p-cec/s5p_cec.c index 1780a08b73c9..33e435855d66 100644 --- a/drivers/staging/media/s5p-cec/s5p_cec.c +++ b/drivers/staging/media/s5p-cec/s5p_cec.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/timer.h> -#include <linux/version.h> #include <linux/workqueue.h> #include <media/cec.h> @@ -231,7 +230,7 @@ static int s5p_cec_remove(struct platform_device *pdev) return 0; } -static int s5p_cec_runtime_suspend(struct device *dev) +static int __maybe_unused s5p_cec_runtime_suspend(struct device *dev) { struct s5p_cec_dev *cec = dev_get_drvdata(dev); @@ -239,7 +238,7 @@ static int s5p_cec_runtime_suspend(struct device *dev) return 0; } -static int s5p_cec_runtime_resume(struct device *dev) +static int __maybe_unused s5p_cec_runtime_resume(struct device *dev) { struct s5p_cec_dev *cec = dev_get_drvdata(dev); int ret; @@ -263,6 +262,7 @@ static const struct of_device_id s5p_cec_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, s5p_cec_match); static struct platform_driver s5p_cec_pdrv = { .probe = s5p_cec_probe, diff --git a/drivers/staging/media/st-cec/Kconfig b/drivers/staging/media/st-cec/Kconfig index 784d2c600aca..c04283db58d6 100644 --- a/drivers/staging/media/st-cec/Kconfig +++ b/drivers/staging/media/st-cec/Kconfig @@ -1,6 +1,6 @@ config VIDEO_STI_HDMI_CEC tristate "STMicroelectronics STiH4xx HDMI CEC driver" - depends on VIDEO_DEV && MEDIA_CEC && (ARCH_STI || COMPILE_TEST) + depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST) ---help--- This is a driver for STIH4xx HDMI CEC interface. It uses the generic CEC framework interface. diff --git a/drivers/staging/media/st-cec/TODO b/drivers/staging/media/st-cec/TODO new file mode 100644 index 000000000000..c61289742c5c --- /dev/null +++ b/drivers/staging/media/st-cec/TODO @@ -0,0 +1,7 @@ +This driver requires that userspace sets the physical address. +However, this should be passed on from the corresponding +ST HDMI driver. + +We have to wait until the HDMI notifier framework has been merged +in order to handle this gracefully, until that time this driver +has to remain in staging. diff --git a/drivers/staging/media/st-cec/stih-cec.c b/drivers/staging/media/st-cec/stih-cec.c index 214344866a6b..eed1fd6bbefa 100644 --- a/drivers/staging/media/st-cec/stih-cec.c +++ b/drivers/staging/media/st-cec/stih-cec.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/version.h> #include <media/cec.h> @@ -108,11 +107,11 @@ /* Constants for CEC_BIT_TOUT_THRESH register */ #define CEC_SBIT_TOUT_47MS BIT(1) -#define CEC_SBIT_TOUT_48MS BIT(0) | BIT(1) +#define CEC_SBIT_TOUT_48MS (BIT(0) | BIT(1)) #define CEC_SBIT_TOUT_50MS BIT(2) #define CEC_DBIT_TOUT_27MS BIT(0) #define CEC_DBIT_TOUT_28MS BIT(1) -#define CEC_DBIT_TOUT_29MS BIT(0) | BIT(1) +#define CEC_DBIT_TOUT_29MS (BIT(0) | BIT(1)) /* Constants for CEC_BIT_PULSE_THRESH register */ #define CEC_BIT_LPULSE_03MS BIT(1) @@ -363,6 +362,7 @@ static const struct of_device_id stih_cec_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, stih_cec_match); static struct platform_driver stih_cec_pdrv = { .probe = stih_cec_probe, diff --git a/include/media/cec.h b/include/media/cec.h index fdb5d600e4bb..717eaf552f3d 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -196,7 +196,7 @@ static inline bool cec_is_sink(const struct cec_adapter *adap) return adap->phys_addr == 0; } -#if IS_ENABLED(CONFIG_MEDIA_CEC) +#if IS_ENABLED(CONFIG_MEDIA_CEC_SUPPORT) struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, void *priv, const char *name, u32 caps, u8 available_las, struct device *parent); diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 40188d362486..55281b92105a 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -68,6 +68,7 @@ enum rc_filter_type { * struct rc_dev - represents a remote control device * @dev: driver model's view of this device * @initialized: 1 if the device init has completed, 0 otherwise + * @managed_alloc: devm_rc_allocate_device was used to create rc_dev * @sysfs_groups: sysfs attribute groups * @input_name: name of the input child device * @input_phys: physical path to the input child device @@ -131,6 +132,7 @@ enum rc_filter_type { struct rc_dev { struct device dev; atomic_t initialized; + bool managed_alloc; const struct attribute_group *sysfs_groups[5]; const char *input_name; const char *input_phys; @@ -203,6 +205,14 @@ struct rc_dev { struct rc_dev *rc_allocate_device(void); /** + * devm_rc_allocate_device - Managed RC device allocation + * + * @dev: pointer to struct device + * returns a pointer to struct rc_dev. + */ +struct rc_dev *devm_rc_allocate_device(struct device *dev); + +/** * rc_free_device - Frees a RC device * * @dev: pointer to struct rc_dev. @@ -217,6 +227,14 @@ void rc_free_device(struct rc_dev *dev); int rc_register_device(struct rc_dev *dev); /** + * devm_rc_register_device - Manageded registering of a RC device + * + * @parent: pointer to struct device. + * @dev: pointer to struct rc_dev. + */ +int devm_rc_register_device(struct device *parent, struct rc_dev *dev); + +/** * rc_unregister_device - Unregisters a RC device * * @dev: pointer to struct rc_dev. diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h index 0a7d9e1fc8c8..61a18893e004 100644 --- a/include/media/v4l2-dv-timings.h +++ b/include/media/v4l2-dv-timings.h @@ -101,12 +101,22 @@ bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t, void *fnc_handle); /** + * v4l2_find_dv_timings_cea861_vic() - find timings based on CEA-861 VIC + * @t: the timings data. + * @vic: CEA-861 VIC code + * + * On success it will fill in @t with the found timings and it returns true. + * On failure it will return false. + */ +bool v4l2_find_dv_timings_cea861_vic(struct v4l2_dv_timings *t, u8 vic); + +/** * v4l2_match_dv_timings() - do two timings match? * * @measured: the measured timings data. * @standard: the timings according to the standard. * @pclock_delta: maximum delta in Hz between standard->pixelclock and - * the measured timings. + * the measured timings. * @match_reduced_fps: if true, then fail if V4L2_DV_FL_REDUCED_FPS does not * match. * @@ -185,6 +195,14 @@ bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync, */ struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait); +/** + * v4l2_dv_timings_aspect_ratio - calculate the aspect ratio based on the + * v4l2_dv_timings information. + * + * @t: the timings data. + */ +struct v4l2_fract v4l2_dv_timings_aspect_ratio(const struct v4l2_dv_timings *t); + /* * reduce_fps - check if conditions for reduced fps are true. * bt - v4l2 timing structure diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index 1b355344c804..3ccd01bd245e 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -90,6 +90,9 @@ struct v4l2_m2m_queue_ctx { * %TRANS_QUEUED, %TRANS_RUNNING and %TRANS_ABORT. * @finished: Wait queue used to signalize when a job queue finished. * @priv: Instance private data + * + * The memory to memory context is specific to a file handle, NOT to e.g. + * a device. */ struct v4l2_m2m_ctx { /* optional cap/out vb2 queues lock */ diff --git a/include/media/v4l2-tpg.h b/include/media/v4l2-tpg.h index 329bebfa930c..13e49d85cae3 100644 --- a/include/media/v4l2-tpg.h +++ b/include/media/v4l2-tpg.h @@ -87,6 +87,13 @@ enum tpg_move_mode { TPG_MOVE_POS_FAST, }; +enum tgp_color_enc { + TGP_COLOR_ENC_RGB, + TGP_COLOR_ENC_YCBCR, + TGP_COLOR_ENC_HSV, + TGP_COLOR_ENC_LUMA, +}; + extern const char * const tpg_aspect_strings[]; #define TPG_MAX_PLANES 3 @@ -119,10 +126,11 @@ struct tpg_data { u8 saturation; s16 hue; u32 fourcc; - bool is_yuv; + enum tgp_color_enc color_enc; u32 colorspace; u32 xfer_func; u32 ycbcr_enc; + u32 hsv_enc; /* * Stores the actual transfer function, i.e. will never be * V4L2_XFER_FUNC_DEFAULT. @@ -132,6 +140,7 @@ struct tpg_data { * Stores the actual Y'CbCr encoding, i.e. will never be * V4L2_YCBCR_ENC_DEFAULT. */ + u32 real_hsv_enc; u32 real_ycbcr_enc; u32 quantization; /* @@ -334,6 +343,19 @@ static inline u32 tpg_g_ycbcr_enc(const struct tpg_data *tpg) return tpg->ycbcr_enc; } +static inline void tpg_s_hsv_enc(struct tpg_data *tpg, u32 hsv_enc) +{ + if (tpg->hsv_enc == hsv_enc) + return; + tpg->hsv_enc = hsv_enc; + tpg->recalc_colors = true; +} + +static inline u32 tpg_g_hsv_enc(const struct tpg_data *tpg) +{ + return tpg->hsv_enc; +} + static inline void tpg_s_xfer_func(struct tpg_data *tpg, u32 xfer_func) { if (tpg->xfer_func == xfer_func) diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index cd2be1c8e9fb..855908e70610 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -83,6 +83,8 @@ header-y += capi.h header-y += cciss_defs.h header-y += cciss_ioctl.h header-y += cdrom.h +header-y += cec.h +header-y += cec-funcs.h header-y += cgroupstats.h header-y += chio.h header-y += cm4000_cs.h diff --git a/include/linux/cec-funcs.h b/include/uapi/linux/cec-funcs.h index 138bbf721e70..3cbc327801d6 100644 --- a/include/linux/cec-funcs.h +++ b/include/uapi/linux/cec-funcs.h @@ -33,12 +33,6 @@ * SOFTWARE. */ -/* - * Note: this framework is still in staging and it is likely the API - * will change before it goes out of staging. - * - * Once it is moved out of staging this header will move to uapi. - */ #ifndef _CEC_UAPI_FUNCS_H #define _CEC_UAPI_FUNCS_H @@ -90,7 +84,7 @@ static inline void cec_ops_inactive_source(const struct cec_msg *msg, } static inline void cec_msg_request_active_source(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[0] |= 0xf; /* broadcast */ @@ -115,7 +109,7 @@ static inline void cec_ops_routing_information(const struct cec_msg *msg, } static inline void cec_msg_routing_change(struct cec_msg *msg, - bool reply, + int reply, __u16 orig_phys_addr, __u16 new_phys_addr) { @@ -162,7 +156,7 @@ static inline void cec_msg_standby(struct cec_msg *msg) /* One Touch Record Feature */ -static inline void cec_msg_record_off(struct cec_msg *msg, bool reply) +static inline void cec_msg_record_off(struct cec_msg *msg, int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_RECORD_OFF; @@ -324,7 +318,7 @@ static inline void cec_msg_record_on_phys_addr(struct cec_msg *msg, } static inline void cec_msg_record_on(struct cec_msg *msg, - bool reply, + int reply, const struct cec_op_record_src *rec_src) { switch (rec_src->type) { @@ -391,7 +385,7 @@ static inline void cec_ops_record_status(const struct cec_msg *msg, } static inline void cec_msg_record_tv_screen(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_RECORD_TV_SCREEN; @@ -465,7 +459,7 @@ static inline void cec_ops_timer_cleared_status(const struct cec_msg *msg, } static inline void cec_msg_clear_analogue_timer(struct cec_msg *msg, - bool reply, + int reply, __u8 day, __u8 month, __u8 start_hr, @@ -520,7 +514,7 @@ static inline void cec_ops_clear_analogue_timer(const struct cec_msg *msg, } static inline void cec_msg_clear_digital_timer(struct cec_msg *msg, - bool reply, + int reply, __u8 day, __u8 month, __u8 start_hr, @@ -566,7 +560,7 @@ static inline void cec_ops_clear_digital_timer(const struct cec_msg *msg, } static inline void cec_msg_clear_ext_timer(struct cec_msg *msg, - bool reply, + int reply, __u8 day, __u8 month, __u8 start_hr, @@ -621,7 +615,7 @@ static inline void cec_ops_clear_ext_timer(const struct cec_msg *msg, } static inline void cec_msg_set_analogue_timer(struct cec_msg *msg, - bool reply, + int reply, __u8 day, __u8 month, __u8 start_hr, @@ -676,7 +670,7 @@ static inline void cec_ops_set_analogue_timer(const struct cec_msg *msg, } static inline void cec_msg_set_digital_timer(struct cec_msg *msg, - bool reply, + int reply, __u8 day, __u8 month, __u8 start_hr, @@ -722,7 +716,7 @@ static inline void cec_ops_set_digital_timer(const struct cec_msg *msg, } static inline void cec_msg_set_ext_timer(struct cec_msg *msg, - bool reply, + int reply, __u8 day, __u8 month, __u8 start_hr, @@ -814,7 +808,7 @@ static inline void cec_ops_cec_version(const struct cec_msg *msg, } static inline void cec_msg_get_cec_version(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GET_CEC_VERSION; @@ -840,7 +834,7 @@ static inline void cec_ops_report_physical_addr(const struct cec_msg *msg, } static inline void cec_msg_give_physical_addr(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GIVE_PHYSICAL_ADDR; @@ -864,7 +858,7 @@ static inline void cec_ops_set_menu_language(const struct cec_msg *msg, } static inline void cec_msg_get_menu_language(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GET_MENU_LANGUAGE; @@ -913,7 +907,7 @@ static inline void cec_ops_report_features(const struct cec_msg *msg, } static inline void cec_msg_give_features(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GIVE_FEATURES; @@ -950,7 +944,7 @@ static inline void cec_ops_deck_status(const struct cec_msg *msg, } static inline void cec_msg_give_deck_status(struct cec_msg *msg, - bool reply, + int reply, __u8 status_req) { msg->len = 3; @@ -984,7 +978,7 @@ static inline void cec_ops_play(const struct cec_msg *msg, struct cec_op_tuner_device_info { __u8 rec_flag; __u8 tuner_display_info; - bool is_analog; + __u8 is_analog; union { struct cec_op_digital_service_id digital; struct { @@ -1054,7 +1048,7 @@ static inline void cec_ops_tuner_device_status(const struct cec_msg *msg, } static inline void cec_msg_give_tuner_device_status(struct cec_msg *msg, - bool reply, + int reply, __u8 status_req) { msg->len = 3; @@ -1137,7 +1131,7 @@ static inline void cec_ops_device_vendor_id(const struct cec_msg *msg, } static inline void cec_msg_give_device_vendor_id(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GIVE_DEVICE_VENDOR_ID; @@ -1273,7 +1267,7 @@ static inline void cec_ops_set_osd_name(const struct cec_msg *msg, } static inline void cec_msg_give_osd_name(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GIVE_OSD_NAME; @@ -1297,7 +1291,7 @@ static inline void cec_ops_menu_status(const struct cec_msg *msg, } static inline void cec_msg_menu_request(struct cec_msg *msg, - bool reply, + int reply, __u8 menu_req) { msg->len = 3; @@ -1314,7 +1308,7 @@ static inline void cec_ops_menu_request(const struct cec_msg *msg, struct cec_op_ui_command { __u8 ui_cmd; - bool has_opt_arg; + __u8 has_opt_arg; union { struct cec_op_channel_data channel_identifier; __u8 ui_broadcast_type; @@ -1360,7 +1354,7 @@ static inline void cec_ops_user_control_pressed(const struct cec_msg *msg, struct cec_op_ui_command *ui_cmd) { ui_cmd->ui_cmd = msg->msg[2]; - ui_cmd->has_opt_arg = false; + ui_cmd->has_opt_arg = 0; if (msg->len == 3) return; switch (ui_cmd->ui_cmd) { @@ -1372,12 +1366,12 @@ static inline void cec_ops_user_control_pressed(const struct cec_msg *msg, case 0x6a: /* The optional operand is one byte for all these ui commands */ ui_cmd->play_mode = msg->msg[3]; - ui_cmd->has_opt_arg = true; + ui_cmd->has_opt_arg = 1; break; case 0x67: if (msg->len < 7) break; - ui_cmd->has_opt_arg = true; + ui_cmd->has_opt_arg = 1; ui_cmd->channel_identifier.channel_number_fmt = msg->msg[3] >> 2; ui_cmd->channel_identifier.major = ((msg->msg[3] & 3) << 6) | msg->msg[4]; ui_cmd->channel_identifier.minor = (msg->msg[5] << 8) | msg->msg[6]; @@ -1409,7 +1403,7 @@ static inline void cec_ops_report_power_status(const struct cec_msg *msg, } static inline void cec_msg_give_device_power_status(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GIVE_DEVICE_POWER_STATUS; @@ -1469,7 +1463,7 @@ static inline void cec_ops_report_audio_status(const struct cec_msg *msg, } static inline void cec_msg_give_audio_status(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GIVE_AUDIO_STATUS; @@ -1491,7 +1485,7 @@ static inline void cec_ops_set_system_audio_mode(const struct cec_msg *msg, } static inline void cec_msg_system_audio_mode_request(struct cec_msg *msg, - bool reply, + int reply, __u16 phys_addr) { msg->len = phys_addr == 0xffff ? 2 : 4; @@ -1526,7 +1520,7 @@ static inline void cec_ops_system_audio_mode_status(const struct cec_msg *msg, } static inline void cec_msg_give_system_audio_mode_status(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS; @@ -1566,7 +1560,7 @@ static inline void cec_ops_report_short_audio_descriptor(const struct cec_msg *m } static inline void cec_msg_request_short_audio_descriptor(struct cec_msg *msg, - bool reply, + int reply, __u8 num_descriptors, const __u8 *audio_format_id, const __u8 *audio_format_code) @@ -1624,7 +1618,7 @@ static inline void cec_msg_report_arc_initiated(struct cec_msg *msg) } static inline void cec_msg_initiate_arc(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_INITIATE_ARC; @@ -1632,7 +1626,7 @@ static inline void cec_msg_initiate_arc(struct cec_msg *msg, } static inline void cec_msg_request_arc_initiation(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_REQUEST_ARC_INITIATION; @@ -1646,7 +1640,7 @@ static inline void cec_msg_report_arc_terminated(struct cec_msg *msg) } static inline void cec_msg_terminate_arc(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_TERMINATE_ARC; @@ -1654,7 +1648,7 @@ static inline void cec_msg_terminate_arc(struct cec_msg *msg, } static inline void cec_msg_request_arc_termination(struct cec_msg *msg, - bool reply) + int reply) { msg->len = 2; msg->msg[1] = CEC_MSG_REQUEST_ARC_TERMINATION; @@ -1696,7 +1690,7 @@ static inline void cec_ops_report_current_latency(const struct cec_msg *msg, } static inline void cec_msg_request_current_latency(struct cec_msg *msg, - bool reply, + int reply, __u16 phys_addr) { msg->len = 4; diff --git a/include/linux/cec.h b/include/uapi/linux/cec.h index 851968e803fa..14b6f24b189e 100644 --- a/include/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -33,16 +33,11 @@ * SOFTWARE. */ -/* - * Note: this framework is still in staging and it is likely the API - * will change before it goes out of staging. - * - * Once it is moved out of staging this header will move to uapi. - */ #ifndef _CEC_UAPI_H #define _CEC_UAPI_H #include <linux/types.h> +#include <linux/string.h> #define CEC_MAX_MSG_SIZE 16 @@ -135,7 +130,7 @@ static inline int cec_msg_opcode(const struct cec_msg *msg) * cec_msg_is_broadcast - return true if this is a broadcast message. * @msg: the message structure */ -static inline bool cec_msg_is_broadcast(const struct cec_msg *msg) +static inline int cec_msg_is_broadcast(const struct cec_msg *msg) { return (msg->msg[0] & 0xf) == 0xf; } @@ -175,7 +170,10 @@ static inline void cec_msg_set_reply_to(struct cec_msg *msg, msg->reply = msg->timeout = 0; } -/* cec status field */ +/* cec_msg flags field */ +#define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0) + +/* cec_msg tx/rx_status field */ #define CEC_TX_STATUS_OK (1 << 0) #define CEC_TX_STATUS_ARB_LOST (1 << 1) #define CEC_TX_STATUS_NACK (1 << 2) @@ -187,14 +185,14 @@ static inline void cec_msg_set_reply_to(struct cec_msg *msg, #define CEC_RX_STATUS_TIMEOUT (1 << 1) #define CEC_RX_STATUS_FEATURE_ABORT (1 << 2) -static inline bool cec_msg_status_is_ok(const struct cec_msg *msg) +static inline int cec_msg_status_is_ok(const struct cec_msg *msg) { if (msg->tx_status && !(msg->tx_status & CEC_TX_STATUS_OK)) - return false; + return 0; if (msg->rx_status && !(msg->rx_status & CEC_RX_STATUS_OK)) - return false; + return 0; if (!msg->tx_status && !msg->rx_status) - return false; + return 0; return !(msg->rx_status & CEC_RX_STATUS_FEATURE_ABORT); } @@ -257,47 +255,47 @@ static inline bool cec_msg_status_is_ok(const struct cec_msg *msg) #define CEC_LOG_ADDR_MASK_SPECIFIC (1 << CEC_LOG_ADDR_SPECIFIC) #define CEC_LOG_ADDR_MASK_UNREGISTERED (1 << CEC_LOG_ADDR_UNREGISTERED) -static inline bool cec_has_tv(__u16 log_addr_mask) +static inline int cec_has_tv(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_TV; } -static inline bool cec_has_record(__u16 log_addr_mask) +static inline int cec_has_record(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_RECORD; } -static inline bool cec_has_tuner(__u16 log_addr_mask) +static inline int cec_has_tuner(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_TUNER; } -static inline bool cec_has_playback(__u16 log_addr_mask) +static inline int cec_has_playback(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_PLAYBACK; } -static inline bool cec_has_audiosystem(__u16 log_addr_mask) +static inline int cec_has_audiosystem(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_AUDIOSYSTEM; } -static inline bool cec_has_backup(__u16 log_addr_mask) +static inline int cec_has_backup(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_BACKUP; } -static inline bool cec_has_specific(__u16 log_addr_mask) +static inline int cec_has_specific(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_SPECIFIC; } -static inline bool cec_is_unregistered(__u16 log_addr_mask) +static inline int cec_is_unregistered(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED; } -static inline bool cec_is_unconfigured(__u16 log_addr_mask) +static inline int cec_is_unconfigured(__u16 log_addr_mask) { return log_addr_mask == 0; } @@ -391,6 +389,10 @@ struct cec_log_addrs { /* Allow a fallback to unregistered */ #define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0) +/* Passthrough RC messages to the input subsystem */ +#define CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU (1 << 1) +/* CDC-Only device: supports only CDC messages */ +#define CEC_LOG_ADDRS_FL_CDC_ONLY (1 << 2) /* Events */ @@ -1011,4 +1013,54 @@ struct cec_event { #define CEC_OP_HPD_ERROR_OTHER 3 #define CEC_OP_HPD_ERROR_NONE_NO_VIDEO 4 +/* End of Messages */ + +/* Helper functions to identify the 'special' CEC devices */ + +static inline int cec_is_2nd_tv(const struct cec_log_addrs *las) +{ + /* + * It is a second TV if the logical address is 14 or 15 and the + * primary device type is a TV. + */ + return las->num_log_addrs && + las->log_addr[0] >= CEC_LOG_ADDR_SPECIFIC && + las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_TV; +} + +static inline int cec_is_processor(const struct cec_log_addrs *las) +{ + /* + * It is a processor if the logical address is 12-15 and the + * primary device type is a Processor. + */ + return las->num_log_addrs && + las->log_addr[0] >= CEC_LOG_ADDR_BACKUP_1 && + las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_PROCESSOR; +} + +static inline int cec_is_switch(const struct cec_log_addrs *las) +{ + /* + * It is a switch if the logical address is 15 and the + * primary device type is a Switch and the CDC-Only flag is not set. + */ + return las->num_log_addrs == 1 && + las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && + las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && + !(las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); +} + +static inline int cec_is_cdc_only(const struct cec_log_addrs *las) +{ + /* + * It is a CDC-only device if the logical address is 15 and the + * primary device type is a Switch and the CDC-Only flag is set. + */ + return las->num_log_addrs == 1 && + las->log_addr[0] == CEC_LOG_ADDR_UNREGISTERED && + las->primary_device_type[0] == CEC_OP_PRIM_DEVTYPE_SWITCH && + (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY); +} + #endif diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index b6a357a5f053..0d2e1e01fbd5 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -892,6 +892,7 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_LINK_FREQ (V4L2_CID_IMAGE_PROC_CLASS_BASE + 1) #define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) #define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3) +#define V4L2_CID_DEINTERLACING_MODE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 4) /* DV-class control IDs defined by V4L2 */ diff --git a/include/uapi/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h index f31957166337..da2955154381 100644 --- a/include/uapi/linux/v4l2-dv-timings.h +++ b/include/uapi/linux/v4l2-dv-timings.h @@ -1,7 +1,7 @@ /* * V4L2 DV timings header. * - * Copyright (C) 2012 Hans Verkuil <hans.verkuil@cisco.com> + * Copyright (C) 2012-2016 Hans Verkuil <hans.verkuil@cisco.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -11,11 +11,6 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #ifndef _V4L2_DV_TIMINGS_H @@ -33,13 +28,14 @@ .bt = { _width , ## args } #endif -/* CEA-861-E timings (i.e. standard HDTV timings) */ +/* CEA-861-F timings (i.e. standard HDTV timings) */ #define V4L2_DV_BT_CEA_640X480P59_94 { \ .type = V4L2_DV_BT_656_1120, \ V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \ 25175000, 16, 96, 48, 10, 2, 33, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, 0) \ + V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 1) \ } /* Note: these are the nominal timings, for HDMI links this format is typically @@ -49,14 +45,18 @@ V4L2_INIT_BT_TIMINGS(720, 480, 1, 0, \ 13500000, 19, 62, 57, 4, 3, 15, 4, 3, 16, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_PICTURE_ASPECT | V4L2_DV_FL_HAS_CEA861_VIC, \ + { 4, 3 }, 6) \ } #define V4L2_DV_BT_CEA_720X480P59_94 { \ .type = V4L2_DV_BT_656_1120, \ V4L2_INIT_BT_TIMINGS(720, 480, 0, 0, \ 27000000, 16, 62, 60, 9, 6, 30, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_PICTURE_ASPECT | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 4, 3 }, 2) \ } /* Note: these are the nominal timings, for HDMI links this format is typically @@ -66,14 +66,18 @@ V4L2_INIT_BT_TIMINGS(720, 576, 1, 0, \ 13500000, 12, 63, 69, 2, 3, 19, 2, 3, 20, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_PICTURE_ASPECT | V4L2_DV_FL_HAS_CEA861_VIC, \ + { 4, 3 }, 21) \ } #define V4L2_DV_BT_CEA_720X576P50 { \ .type = V4L2_DV_BT_656_1120, \ V4L2_INIT_BT_TIMINGS(720, 576, 0, 0, \ 27000000, 12, 64, 68, 5, 5, 39, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_PICTURE_ASPECT | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 4, 3 }, 17) \ } #define V4L2_DV_BT_CEA_1280X720P24 { \ @@ -82,7 +86,7 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 59400000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \ V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 60) \ } #define V4L2_DV_BT_CEA_1280X720P25 { \ @@ -90,7 +94,8 @@ V4L2_INIT_BT_TIMINGS(1280, 720, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 2420, 40, 220, 5, 5, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 61) \ } #define V4L2_DV_BT_CEA_1280X720P30 { \ @@ -99,7 +104,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 62) \ } #define V4L2_DV_BT_CEA_1280X720P50 { \ @@ -107,7 +113,8 @@ V4L2_INIT_BT_TIMINGS(1280, 720, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 440, 40, 220, 5, 5, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 19) \ } #define V4L2_DV_BT_CEA_1280X720P60 { \ @@ -116,7 +123,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 110, 40, 220, 5, 5, 20, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 4) \ } #define V4L2_DV_BT_CEA_1920X1080P24 { \ @@ -125,7 +133,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 638, 44, 148, 4, 5, 36, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 32) \ } #define V4L2_DV_BT_CEA_1920X1080P25 { \ @@ -133,7 +142,8 @@ V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 33) \ } #define V4L2_DV_BT_CEA_1920X1080P30 { \ @@ -142,7 +152,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 34) \ } #define V4L2_DV_BT_CEA_1920X1080I50 { \ @@ -151,7 +162,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 74250000, 528, 44, 148, 2, 5, 15, 2, 5, 16, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 20) \ } #define V4L2_DV_BT_CEA_1920X1080P50 { \ @@ -159,7 +171,8 @@ V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 148500000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 31) \ } #define V4L2_DV_BT_CEA_1920X1080I60 { \ @@ -169,7 +182,8 @@ 74250000, 88, 44, 148, 2, 5, 15, 2, 5, 16, \ V4L2_DV_BT_STD_CEA861, \ V4L2_DV_FL_CAN_REDUCE_FPS | \ - V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_HALF_LINE | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 5) \ } #define V4L2_DV_BT_CEA_1920X1080P60 { \ @@ -178,7 +192,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 148500000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \ V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 16) \ } #define V4L2_DV_BT_CEA_3840X2160P24 { \ @@ -187,7 +202,9 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 1276, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC | V4L2_DV_FL_HAS_HDMI_VIC, \ + { 0, 0 }, 93, 3) \ } #define V4L2_DV_BT_CEA_3840X2160P25 { \ @@ -195,7 +212,9 @@ V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC | \ + V4L2_DV_FL_HAS_HDMI_VIC, { 0, 0 }, 94, 2) \ } #define V4L2_DV_BT_CEA_3840X2160P30 { \ @@ -204,7 +223,9 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC | V4L2_DV_FL_HAS_HDMI_VIC, \ + { 0, 0 }, 95, 1) \ } #define V4L2_DV_BT_CEA_3840X2160P50 { \ @@ -212,7 +233,8 @@ V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 96) \ } #define V4L2_DV_BT_CEA_3840X2160P60 { \ @@ -221,7 +243,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 97) \ } #define V4L2_DV_BT_CEA_4096X2160P24 { \ @@ -230,7 +253,9 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 1020, 88, 296, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC | V4L2_DV_FL_HAS_HDMI_VIC, \ + { 0, 0 }, 98, 4) \ } #define V4L2_DV_BT_CEA_4096X2160P25 { \ @@ -238,7 +263,8 @@ V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 99) \ } #define V4L2_DV_BT_CEA_4096X2160P30 { \ @@ -247,7 +273,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 297000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 100) \ } #define V4L2_DV_BT_CEA_4096X2160P50 { \ @@ -255,7 +282,8 @@ V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_BT_STD_CEA861, \ + V4L2_DV_FL_IS_CE_VIDEO | V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 101) \ } #define V4L2_DV_BT_CEA_4096X2160P60 { \ @@ -264,7 +292,8 @@ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 594000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \ V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \ + V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO | \ + V4L2_DV_FL_HAS_CEA861_VIC, { 0, 0 }, 102) \ } diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 94f123f3e04e..d3f613e2c54a 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -335,6 +335,19 @@ enum v4l2_ycbcr_encoding { }; /* + * enum v4l2_hsv_encoding values should not collide with the ones from + * enum v4l2_ycbcr_encoding. + */ +enum v4l2_hsv_encoding { + + /* Hue mapped to 0 - 179 */ + V4L2_HSV_ENC_180 = 128, + + /* Hue mapped to 0-255 */ + V4L2_HSV_ENC_256 = 129, +}; + +/* * Determine how YCBCR_ENC_DEFAULT should map to a proper Y'CbCr encoding. * This depends on the colorspace. */ @@ -362,9 +375,10 @@ enum v4l2_quantization { * This depends on whether the image is RGB or not, the colorspace and the * Y'CbCr encoding. */ -#define V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb, colsp, ycbcr_enc) \ - (((is_rgb) && (colsp) == V4L2_COLORSPACE_BT2020) ? V4L2_QUANTIZATION_LIM_RANGE : \ - (((is_rgb) || (ycbcr_enc) == V4L2_YCBCR_ENC_XV601 || \ +#define V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb_or_hsv, colsp, ycbcr_enc) \ + (((is_rgb_or_hsv) && (colsp) == V4L2_COLORSPACE_BT2020) ? \ + V4L2_QUANTIZATION_LIM_RANGE : \ + (((is_rgb_or_hsv) || (ycbcr_enc) == V4L2_YCBCR_ENC_XV601 || \ (ycbcr_enc) == V4L2_YCBCR_ENC_XV709 || (colsp) == V4L2_COLORSPACE_JPEG) || \ (colsp) == V4L2_COLORSPACE_ADOBERGB || (colsp) == V4L2_COLORSPACE_SRGB ? \ V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE)) @@ -462,7 +476,12 @@ struct v4l2_pix_format { __u32 colorspace; /* enum v4l2_colorspace */ __u32 priv; /* private data, depends on pixelformat */ __u32 flags; /* format flags (V4L2_PIX_FMT_FLAG_*) */ - __u32 ycbcr_enc; /* enum v4l2_ycbcr_encoding */ + union { + /* enum v4l2_ycbcr_encoding */ + __u32 ycbcr_enc; + /* enum v4l2_hsv_encoding */ + __u32 hsv_enc; + }; __u32 quantization; /* enum v4l2_quantization */ __u32 xfer_func; /* enum v4l2_xfer_func */ }; @@ -587,6 +606,10 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ +/* HSV formats */ +#define V4L2_PIX_FMT_HSV24 v4l2_fourcc('H', 'S', 'V', '3') +#define V4L2_PIX_FMT_HSV32 v4l2_fourcc('H', 'S', 'V', '4') + /* compressed formats */ #define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */ #define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */ @@ -603,6 +626,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ +#define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ @@ -634,6 +658,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y8I v4l2_fourcc('Y', '8', 'I', ' ') /* Greyscale 8-bit L/R interleaved */ #define V4L2_PIX_FMT_Y12I v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */ #define V4L2_PIX_FMT_Z16 v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */ +#define V4L2_PIX_FMT_MT21C v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode */ /* SDR formats - used only for Software Defined Radio devices */ #define V4L2_SDR_FMT_CU8 v4l2_fourcc('C', 'U', '0', '8') /* IQ u8 */ @@ -1229,6 +1254,9 @@ struct v4l2_standard { * (aka field 2) of interlaced field formats * @standards: Standards the timing belongs to * @flags: Flags + * @picture_aspect: The picture aspect ratio (hor/vert). + * @cea861_vic: VIC code as per the CEA-861 standard. + * @hdmi_vic: VIC code as per the HDMI standard. * @reserved: Reserved fields, must be zeroed. * * A note regarding vertical interlaced timings: height refers to the total @@ -1258,7 +1286,10 @@ struct v4l2_bt_timings { __u32 il_vbackporch; __u32 standards; __u32 flags; - __u32 reserved[14]; + struct v4l2_fract picture_aspect; + __u8 cea861_vic; + __u8 hdmi_vic; + __u8 reserved[46]; } __attribute__ ((packed)); /* Interlaced or progressive format */ @@ -1278,39 +1309,66 @@ struct v4l2_bt_timings { /* Flags */ -/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary - GTF' curve (GTF). In both cases the horizontal and/or vertical blanking - intervals are reduced, allowing a higher resolution over the same - bandwidth. This is a read-only flag. */ +/* + * CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary + * GTF' curve (GTF). In both cases the horizontal and/or vertical blanking + * intervals are reduced, allowing a higher resolution over the same + * bandwidth. This is a read-only flag. + */ #define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) -/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple - of six. These formats can be optionally played at 1 / 1.001 speed. - This is a read-only flag. */ +/* + * CEA-861 specific: set for CEA-861 formats with a framerate of a multiple + * of six. These formats can be optionally played at 1 / 1.001 speed. + * This is a read-only flag. + */ #define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) -/* CEA-861 specific: only valid for video transmitters, the flag is cleared - by receivers. - If the framerate of the format is a multiple of six, then the pixelclock - used to set up the transmitter is divided by 1.001 to make it compatible - with 60 Hz based standards such as NTSC and PAL-M that use a framerate of - 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate - such frequencies, then the flag will also be cleared. */ +/* + * CEA-861 specific: only valid for video transmitters, the flag is cleared + * by receivers. + * If the framerate of the format is a multiple of six, then the pixelclock + * used to set up the transmitter is divided by 1.001 to make it compatible + * with 60 Hz based standards such as NTSC and PAL-M that use a framerate of + * 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate + * such frequencies, then the flag will also be cleared. + */ #define V4L2_DV_FL_REDUCED_FPS (1 << 2) -/* Specific to interlaced formats: if set, then field 1 is really one half-line - longer and field 2 is really one half-line shorter, so each field has - exactly the same number of half-lines. Whether half-lines can be detected - or used depends on the hardware. */ +/* + * Specific to interlaced formats: if set, then field 1 is really one half-line + * longer and field 2 is really one half-line shorter, so each field has + * exactly the same number of half-lines. Whether half-lines can be detected + * or used depends on the hardware. + */ #define V4L2_DV_FL_HALF_LINE (1 << 3) -/* If set, then this is a Consumer Electronics (CE) video format. Such formats +/* + * If set, then this is a Consumer Electronics (CE) video format. Such formats * differ from other formats (commonly called IT formats) in that if RGB * encoding is used then by default the RGB values use limited range (i.e. * use the range 16-235) as opposed to 0-255. All formats defined in CEA-861 - * except for the 640x480 format are CE formats. */ + * except for the 640x480 format are CE formats. + */ #define V4L2_DV_FL_IS_CE_VIDEO (1 << 4) /* Some formats like SMPTE-125M have an interlaced signal with a odd * total height. For these formats, if this flag is set, the first * field has the extra line. If not, it is the second field. */ -#define V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE (1 << 5) +#define V4L2_DV_FL_FIRST_FIELD_EXTRA_LINE (1 << 5) +/* + * If set, then the picture_aspect field is valid. Otherwise assume that the + * pixels are square, so the picture aspect ratio is the same as the width to + * height ratio. + */ +#define V4L2_DV_FL_HAS_PICTURE_ASPECT (1 << 6) +/* + * If set, then the cea861_vic field is valid and contains the Video + * Identification Code as per the CEA-861 standard. + */ +#define V4L2_DV_FL_HAS_CEA861_VIC (1 << 7) +/* + * If set, then the hdmi_vic field is valid and contains the Video + * Identification Code as per the HDMI standard (HDMI Vendor Specific + * InfoFrame). + */ +#define V4L2_DV_FL_HAS_HDMI_VIC (1 << 8) /* A few useful defines to calculate the total blanking and frame sizes */ #define V4L2_DV_BT_BLANKING_WIDTH(bt) \ @@ -2006,7 +2064,10 @@ struct v4l2_pix_format_mplane { struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES]; __u8 num_planes; __u8 flags; - __u8 ycbcr_enc; + union { + __u8 ycbcr_enc; + __u8 hsv_enc; + }; __u8 quantization; __u8 xfer_func; __u8 reserved[7]; |