diff options
-rw-r--r-- | Documentation/devicetree/bindings/net/micrel-ksz9021.txt | 49 | ||||
-rw-r--r-- | drivers/net/phy/micrel.c | 103 |
2 files changed, 151 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz9021.txt b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt new file mode 100644 index 000000000000..997a63f1aea1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt @@ -0,0 +1,49 @@ +Micrel KSZ9021 Gigabit Ethernet PHY + +Some boards require special tuning values, particularly when it comes to +clock delays. You can specify clock delay values by adding +micrel-specific properties to an Ethernet OF device node. + +All skew control options are specified in picoseconds. The minimum +value is 0, and the maximum value is 3000. + +Optional properties: + - rxc-skew-ps : Skew control of RXC pad + - rxdv-skew-ps : Skew control of RX CTL pad + - txc-skew-ps : Skew control of TXC pad + - txen-skew-ps : Skew control of TX_CTL pad + - rxd0-skew-ps : Skew control of RX data 0 pad + - rxd1-skew-ps : Skew control of RX data 1 pad + - rxd2-skew-ps : Skew control of RX data 2 pad + - rxd3-skew-ps : Skew control of RX data 3 pad + - txd0-skew-ps : Skew control of TX data 0 pad + - txd1-skew-ps : Skew control of TX data 1 pad + - txd2-skew-ps : Skew control of TX data 2 pad + - txd3-skew-ps : Skew control of TX data 3 pad + +Examples: + + /* Attach to an Ethernet device with autodetected PHY */ + &enet { + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txen-skew-ps = <0>; + status = "okay"; + }; + + /* Attach to an explicitly-specified PHY */ + mdio { + phy0: ethernet-phy@0 { + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txen-skew-ps = <0>; + reg = <0>; + }; + }; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 9ca494550186..c31aad0004cb 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/phy.h> #include <linux/micrel_phy.h> +#include <linux/of.h> /* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 @@ -53,6 +54,20 @@ #define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) #define KSZ8051_RMII_50MHZ_CLK (1 << 7) +/* Write/read to/from extended registers */ +#define MII_KSZPHY_EXTREG 0x0b +#define KSZPHY_EXTREG_WRITE 0x8000 + +#define MII_KSZPHY_EXTREG_WRITE 0x0c +#define MII_KSZPHY_EXTREG_READ 0x0d + +/* Extended registers */ +#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104 +#define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105 +#define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106 + +#define PS_TO_REG 200 + static int ksz_config_flags(struct phy_device *phydev) { int regval; @@ -65,6 +80,20 @@ static int ksz_config_flags(struct phy_device *phydev) return 0; } +static int kszphy_extended_write(struct phy_device *phydev, + u32 regnum, u16 val) +{ + phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum); + return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val); +} + +static int kszphy_extended_read(struct phy_device *phydev, + u32 regnum) +{ + phy_write(phydev, MII_KSZPHY_EXTREG, regnum); + return phy_read(phydev, MII_KSZPHY_EXTREG_READ); +} + static int kszphy_ack_interrupt(struct phy_device *phydev) { /* bit[7..0] int status, which is a read and clear register. */ @@ -141,6 +170,78 @@ static int ks8051_config_init(struct phy_device *phydev) return rc < 0 ? rc : 0; } +static int ksz9021_load_values_from_of(struct phy_device *phydev, + struct device_node *of_node, u16 reg, + char *field1, char *field2, + char *field3, char *field4) +{ + int val1 = -1; + int val2 = -2; + int val3 = -3; + int val4 = -4; + int newval; + int matches = 0; + + if (!of_property_read_u32(of_node, field1, &val1)) + matches++; + + if (!of_property_read_u32(of_node, field2, &val2)) + matches++; + + if (!of_property_read_u32(of_node, field3, &val3)) + matches++; + + if (!of_property_read_u32(of_node, field4, &val4)) + matches++; + + if (!matches) + return 0; + + if (matches < 4) + newval = kszphy_extended_read(phydev, reg); + else + newval = 0; + + if (val1 != -1) + newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0); + + if (val2 != -1) + newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4); + + if (val3 != -1) + newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8); + + if (val4 != -1) + newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12); + + return kszphy_extended_write(phydev, reg, newval); +} + +static int ksz9021_config_init(struct phy_device *phydev) +{ + struct device *dev = &phydev->dev; + struct device_node *of_node = dev->of_node; + + if (!of_node && dev->parent->of_node) + of_node = dev->parent->of_node; + + if (of_node) { + ksz9021_load_values_from_of(phydev, of_node, + MII_KSZPHY_CLK_CONTROL_PAD_SKEW, + "txen-skew-ps", "txc-skew-ps", + "rxdv-skew-ps", "rxc-skew-ps"); + ksz9021_load_values_from_of(phydev, of_node, + MII_KSZPHY_RX_DATA_PAD_SKEW, + "rxd0-skew-ps", "rxd1-skew-ps", + "rxd2-skew-ps", "rxd3-skew-ps"); + ksz9021_load_values_from_of(phydev, of_node, + MII_KSZPHY_TX_DATA_PAD_SKEW, + "txd0-skew-ps", "txd1-skew-ps", + "txd2-skew-ps", "txd3-skew-ps"); + } + return 0; +} + #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6) #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4) @@ -281,7 +382,7 @@ static struct phy_driver ksphy_driver[] = { .name = "Micrel KSZ9021 Gigabit PHY", .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = kszphy_config_init, + .config_init = ksz9021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, |