diff options
| -rw-r--r-- | arch/mips/pci/pci-bcm47xx.c | 49 | ||||
| -rw-r--r-- | drivers/bcma/bcma_private.h | 1 | ||||
| -rw-r--r-- | drivers/bcma/driver_pci.c | 38 | ||||
| -rw-r--r-- | drivers/bcma/driver_pci_host.c | 576 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_driver_pci.h | 38 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_regs.h | 27 |
6 files changed, 690 insertions, 39 deletions
diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c index 400535a955d0..c682468010c5 100644 --- a/arch/mips/pci/pci-bcm47xx.c +++ b/arch/mips/pci/pci-bcm47xx.c @@ -25,6 +25,7 @@ #include <linux/types.h> #include <linux/pci.h> #include <linux/ssb/ssb.h> +#include <linux/bcma/bcma.h> #include <bcm47xx.h> int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) @@ -32,15 +33,12 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return 0; } -int pcibios_plat_dev_init(struct pci_dev *dev) -{ #ifdef CONFIG_BCM47XX_SSB +static int bcm47xx_pcibios_plat_dev_init_ssb(struct pci_dev *dev) +{ int res; u8 slot, pin; - if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB) - return 0; - res = ssb_pcibios_plat_dev_init(dev); if (res < 0) { printk(KERN_ALERT "PCI: Failed to init device %s\n", @@ -60,6 +58,47 @@ int pcibios_plat_dev_init(struct pci_dev *dev) } dev->irq = res; + return 0; +} #endif + +#ifdef CONFIG_BCM47XX_BCMA +static int bcm47xx_pcibios_plat_dev_init_bcma(struct pci_dev *dev) +{ + int res; + + res = bcma_core_pci_plat_dev_init(dev); + if (res < 0) { + printk(KERN_ALERT "PCI: Failed to init device %s\n", + pci_name(dev)); + return res; + } + + res = bcma_core_pci_pcibios_map_irq(dev); + + /* IRQ-0 and IRQ-1 are software interrupts. */ + if (res < 2) { + printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", + pci_name(dev)); + return res; + } + + dev->irq = res; return 0; } +#endif + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ +#ifdef CONFIG_BCM47XX_SSB + if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) + return bcm47xx_pcibios_plat_dev_init_ssb(dev); + else +#endif +#ifdef CONFIG_BCM47XX_BCMA + if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) + return bcm47xx_pcibios_plat_dev_init_bcma(dev); + else +#endif + return 0; +} diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index 63c5242159f2..b81755bb4798 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -52,6 +52,7 @@ extern void __exit bcma_host_pci_exit(void); u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c index 155d953dba74..4d38ae179b48 100644 --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c @@ -2,7 +2,7 @@ * Broadcom specific AMBA * PCI Core * - * Copyright 2005, Broadcom Corporation + * Copyright 2005, 2011, Broadcom Corporation * Copyright 2006, 2007, Michael Buesch <m@bues.ch> * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> * @@ -179,47 +179,19 @@ static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) bcma_pcicore_serdes_workaround(pc); } -static bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -{ - struct bcma_bus *bus = pc->core->bus; - u16 chipid_top; - - chipid_top = (bus->chipinfo.id & 0xFF00); - if (chipid_top != 0x4700 && - chipid_top != 0x5300) - return false; - -#ifdef CONFIG_SSB_DRIVER_PCICORE - if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) - return false; -#endif /* CONFIG_SSB_DRIVER_PCICORE */ - -#if 0 - /* TODO: on BCMA we use address from EROM instead of magic formula */ - u32 tmp; - return !mips_busprobe32(tmp, (bus->mmio + - (pc->core->core_index * BCMA_CORE_SIZE))); -#endif - - return true; -} - void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) { if (pc->setup_done) return; - if (bcma_core_pci_is_in_hostmode(pc)) { #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + pc->hostmode = bcma_core_pci_is_in_hostmode(pc); + if (pc->hostmode) bcma_core_pci_hostmode_init(pc); -#else - pr_err("Driver compiled without support for hostmode PCI\n"); #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - } else { - bcma_core_pci_clientmode_init(pc); - } - pc->setup_done = true; + if (!pc->hostmode) + bcma_core_pci_clientmode_init(pc); } int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 99e040b607a2..4e20bcfa7ec5 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -2,13 +2,587 @@ * Broadcom specific AMBA * PCI Core in hostmode * + * Copyright 2005 - 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> + * * Licensed under the GNU/GPL. See COPYING for details. */ #include "bcma_private.h" +#include <linux/export.h> #include <linux/bcma/bcma.h> +#include <asm/paccess.h> + +/* Probe a 32bit value on the bus and catch bus exceptions. + * Returns nonzero on a bus exception. + * This is MIPS specific */ +#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) + +/* Assume one-hot slot wiring */ +#define BCMA_PCI_SLOT_MAX 16 +#define PCI_CONFIG_SPACE_SIZE 256 + +bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) +{ + struct bcma_bus *bus = pc->core->bus; + u16 chipid_top; + u32 tmp; + + chipid_top = (bus->chipinfo.id & 0xFF00); + if (chipid_top != 0x4700 && + chipid_top != 0x5300) + return false; + + if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { + pr_info("This PCI core is disabled and not working\n"); + return false; + } + + bcma_core_enable(pc->core, 0); + + return !mips_busprobe32(tmp, pc->core->io_addr); +} + +static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) +{ + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); + return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); +} + +static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, + u32 data) +{ + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); +} + +static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off) +{ + u32 addr = 0; + + /* Issue config commands only when the data link is up (atleast + * one external pcie device is present). + */ + if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) + & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) + goto out; + + /* Type 0 transaction */ + /* Slide the PCI window to the appropriate slot */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); + /* Calculate the address */ + addr = pc->host_controller->host_cfg_addr; + addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); + addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); + addr |= (off & ~3); + +out: + return addr; +} + +static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off, + void *buf, int len) +{ + int err = -EINVAL; + u32 addr, val; + void __iomem *mmio = 0; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { + /* we support only two functions on device 0 */ + if (func > 1) + return -EINVAL; + + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); + addr |= (off & 0x0FFF); + val = bcma_pcie_read_config(pc, addr); + } else { + addr = BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); + val = pcicore_read32(pc, addr); + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + + val = readl(mmio); + } + val >>= (8 * (off & 3)); + + switch (len) { + case 1: + *((u8 *)buf) = (u8)val; + break; + case 2: + *((u16 *)buf) = (u16)val; + break; + case 4: + *((u32 *)buf) = (u32)val; + break; + } + err = 0; +unmap: + if (mmio) + iounmap(mmio); +out: + return err; +} + +static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off, + const void *buf, int len) +{ + int err = -EINVAL; + u32 addr = 0, val = 0; + void __iomem *mmio = 0; + u16 chipid = pc->core->bus->chipinfo.id; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off < PCI_CONFIG_SPACE_SIZE) { + addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + } + + switch (len) { + case 1: + val = readl(mmio); + val &= ~(0xFF << (8 * (off & 3))); + val |= *((const u8 *)buf) << (8 * (off & 3)); + break; + case 2: + val = readl(mmio); + val &= ~(0xFFFF << (8 * (off & 3))); + val |= *((const u16 *)buf) << (8 * (off & 3)); + break; + case 4: + val = *((const u32 *)buf); + break; + } + if (dev == 0 && !addr) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + addr = (func << 12); + addr |= (off & 0x0FFF); + bcma_pcie_write_config(pc, addr, val); + } else { + writel(val, mmio); + + if (chipid == 0x4716 || chipid == 0x4748) + readl(mmio); + } + + err = 0; +unmap: + if (mmio) + iounmap(mmio); +out: + return err; +} + +static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, + unsigned int devfn, + int reg, int size, u32 *val) +{ + unsigned long flags; + int err; + struct bcma_drv_pci *pc; + struct bcma_drv_pci_host *pc_host; + + pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); + pc = pc_host->pdev; + + spin_lock_irqsave(&pc_host->cfgspace_lock, flags); + err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, val, size); + spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, + unsigned int devfn, + int reg, int size, u32 val) +{ + unsigned long flags; + int err; + struct bcma_drv_pci *pc; + struct bcma_drv_pci_host *pc_host; + + pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); + pc = pc_host->pdev; + + spin_lock_irqsave(&pc_host->cfgspace_lock, flags); + err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, &val, size); + spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +/* return cap_offset if requested capability exists in the PCI config space */ +static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, + unsigned int dev, + unsigned int func, u8 req_cap_id, + unsigned char *buf, u32 *buflen) +{ + u8 cap_id; + u8 cap_ptr = 0; + u32 bufsize; + u8 byte_val; + + /* check for Header type 0 */ + bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, + sizeof(u8)); + if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) + return cap_ptr; + + /* check if the capability pointer field exists */ + bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, + sizeof(u8)); + if (!(byte_val & PCI_STATUS_CAP_LIST)) + return cap_ptr; + + /* check if the capability pointer is 0x00 */ + bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, + sizeof(u8)); + if (cap_ptr == 0x00) + return cap_ptr; + + /* loop thr'u the capability list and see if the requested capabilty + * exists */ + bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); + while (cap_id != req_cap_id) { + bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, + sizeof(u8)); + if (cap_ptr == 0x00) + return cap_ptr; + bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, + sizeof(u8)); + } + + /* found the caller requested capability */ + if ((buf != NULL) && (buflen != NULL)) { + u8 cap_data; + + bufsize = *buflen; + if (!bufsize) + return cap_ptr; + + *buflen = 0; + + /* copy the cpability data excluding cap ID and next ptr */ + cap_data = cap_ptr + 2; + if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) + bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; + *buflen = bufsize; + while (bufsize--) { + bcma_extpci_read_config(pc, dev, func, cap_data, buf, + sizeof(u8)); + cap_data++; + buf++; + } + } + + return cap_ptr; +} + +/* If the root port is capable of returning Config Request + * Retry Status (CRS) Completion Status to software then + * enable the feature. + */ +static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) +{ + u8 cap_ptr, root_ctrl, root_cap, dev; + u16 val16; + int i; + + cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, + NULL); + root_cap = cap_ptr + PCI_EXP_RTCAP; + bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); + if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { + /* Enable CRS software visibility */ + root_ctrl = cap_ptr + PCI_EXP_RTCTL; + val16 = PCI_EXP_RTCTL_CRSSVE; + bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, + sizeof(u16)); + + /* Initiate a configuration request to read the vendor id + * field of the device function's config space header after + * 100 ms wait time from the end of Reset. If the device is + * not done with its internal initialization, it must at + * least return a completion TLP, with a completion status + * of "Configuration Request Retry Status (CRS)". The root + * complex must complete the request to the host by returning + * a read-data value of 0001h for the Vendor ID field and + * all 1s for any additional bytes included in the request. + * Poll using the config reads for max wait time of 1 sec or + * until we receive the successful completion status. Repeat + * the procedure for all the devices. + */ + for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { + for (i = 0; i < 100000; i++) { + bcma_extpci_read_config(pc, dev, 0, + PCI_VENDOR_ID, &val16, + sizeof(val16)); + if (val16 != 0x1) + break; + udelay(10); + } + if (val16 == 0x1) + pr_err("PCI: Broken device in slot %d\n", dev); + } + } +} void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) { - pr_err("No support for PCI core in hostmode yet\n"); + struct bcma_bus *bus = pc->core->bus; + struct bcma_drv_pci_host *pc_host; + u32 tmp; + u32 pci_membase_1G; + unsigned long io_map_base; + + pr_info("PCIEcore in host mode found\n"); + + pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); + if (!pc_host) { + pr_err("can not allocate memory"); + return; + } + + pc->host_controller = pc_host; + pc_host->pci_controller.io_resource = &pc_host->io_resource; + pc_host->pci_controller.mem_resource = &pc_host->mem_resource; + pc_host->pci_controller.pci_ops = &pc_host->pci_ops; + pc_host->pdev = pc; + + pci_membase_1G = BCMA_SOC_PCI_DMA; + pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; + + pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; + pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; + + pc_host->mem_resource.name = "BCMA PCIcore external memory", + pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; + pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; + pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; + + pc_host->io_resource.name = "BCMA PCIcore external I/O", + pc_host->io_resource.start = 0x100; + pc_host->io_resource.end = 0x7FF; + pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; + + /* Reset RC */ + udelay(3000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); + udelay(1000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | + BCMA_CORE_PCI_CTL_RST_OE); + + /* 64 MB I/O access window. On 4716, use + * sbtopcie0 to access the device registers. We + * can't use address match 2 (1 GB window) region + * as mips can't generate 64-bit address on the + * backplane. + */ + if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); + } else if (bus->chipinfo.id == 0x5300) { + tmp = BCMA_CORE_PCI_SBTOPCI_MEM; + tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; + tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; + if (pc->core->core_unit == 0) { + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + tmp | BCMA_SOC_PCI_MEM); + } else if (pc->core->core_unit == 1) { + pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; + pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + tmp | BCMA_SOC_PCI1_MEM); + } + } else + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + BCMA_CORE_PCI_SBTOPCI_IO); + + /* 64 MB configuration access window */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); + + /* 1 GB memory access window */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, + BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); + + + /* As per PCI Express Base Spec 1.1 we need to wait for + * at least 100 ms from the end of a reset (cold/warm/hot) + * before issuing configuration requests to PCI Express + * devices. + */ + udelay(100000); + + bcma_core_pci_enable_crs(pc); + + /* Enable PCI bridge BAR0 memory & master access */ + tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); + + /* Enable PCI interrupts */ + pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); + + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. */ + io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, + 0x04000000); + pc_host->pci_controller.io_map_base = io_map_base; + set_io_port_base(pc_host->pci_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. */ + mdelay(10); + register_pci_controller(&pc_host->pci_controller); + return; +} + +/* Early PCI fixup for a device on the PCI-core bridge. */ +static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) +{ + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (PCI_SLOT(dev->devfn) != 0) + return; + + pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { + pr_err("PCI: BCMA bridge enable failed\n"); + return; + } + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); + +/* Early PCI fixup for all PCI-cores to set the correct memory address. */ +static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) +{ + struct resource *res; + int pos; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (PCI_SLOT(dev->devfn) == 0) + return; + + pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); + + for (pos = 0; pos < 6; pos++) { + res = &dev->resource[pos]; + if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) + pci_assign_resource(dev, pos); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); + +/* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ +int bcma_core_pci_plat_dev_init(struct pci_dev *dev) +{ + struct bcma_drv_pci_host *pc_host; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); + + pr_info("PCI: Fixing up device %s\n", pci_name(dev)); + + /* Fix up interrupt lines */ + dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + + return 0; +} +EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); + +/* PCI device IRQ mapping. */ +int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) +{ + struct bcma_drv_pci_host *pc_host; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); + return bcma_core_mips_irq(pc_host->pdev->core) + 2; } +EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 679d4cab4547..46c71e27d31f 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -160,9 +160,44 @@ struct pci_dev; /* PCIcore specific boardflags */ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ +/* PCIE Config space accessing MACROS */ +#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ +#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ +#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ +#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ + +#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ +#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ +#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ +#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ + +/* PCIE Root Capability Register bits (Host mode only) */ +#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + +struct bcma_drv_pci; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +struct bcma_drv_pci_host { + struct bcma_drv_pci *pdev; + + u32 host_cfg_addr; + spinlock_t cfgspace_lock; + + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; +#endif + struct bcma_drv_pci { struct bcma_device *core; u8 setup_done:1; + u8 hostmode:1; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host *host_controller; +#endif }; /* Register access */ @@ -173,4 +208,7 @@ extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 9faae2ae02e8..5a71d5719640 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -56,4 +56,31 @@ #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ +/* SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ +#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) +#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ +#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ + + +#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ +#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), low 32 bits + */ +#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + +#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + #endif /* LINUX_BCMA_REGS_H_ */ |