diff options
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt | 1 | ||||
| -rw-r--r-- | Documentation/hwmon/ntc_thermistor | 6 | ||||
| -rw-r--r-- | Documentation/hwmon/tc74 | 20 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/atxp1.c | 58 | ||||
| -rw-r--r-- | drivers/hwmon/max197.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/ntc_thermistor.c | 82 | ||||
| -rw-r--r-- | drivers/hwmon/sht15.c | 2 | ||||
| -rw-r--r-- | drivers/hwmon/tc74.c | 177 | ||||
| -rw-r--r-- | include/linux/platform_data/ntc_thermistor.h | 1 |
11 files changed, 290 insertions, 78 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index fcca8e744f41..a04a80f9cc70 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -9,6 +9,7 @@ Requires node properties: "murata,ncp21wb473" "murata,ncp03wb473" "murata,ncp15wl333" + "murata,ncp03wf104" /* Usage of vendor name "ntc" is deprecated */ <DEPRECATED> "ntc,ncp15wb473" diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor index c5e05e2900a3..1d4cc847c6fe 100644 --- a/Documentation/hwmon/ntc_thermistor +++ b/Documentation/hwmon/ntc_thermistor @@ -2,8 +2,10 @@ Kernel driver ntc_thermistor ================= Supported thermistors from Murata: -* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333 - Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333' +* Murata NTC Thermistors NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, + NCP15WL333, NCP03WF104 + Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', + 'ncp15wl333', 'ncp03wf104' Datasheet: Publicly available at Murata Supported thermistors from EPCOS: diff --git a/Documentation/hwmon/tc74 b/Documentation/hwmon/tc74 new file mode 100644 index 000000000000..43027aad5f8e --- /dev/null +++ b/Documentation/hwmon/tc74 @@ -0,0 +1,20 @@ +Kernel driver tc74 +==================== + +Supported chips: + * Microchip TC74 + Prefix: 'tc74' + Datasheet: Publicly available at Microchip website. + +Description +----------- + +Driver supports the above part. + +The tc74 has an 8-bit sensor, with 1 degree centigrade resolution +and +- 2 degrees centigrade accuracy. + +Notes +----- + +Currently entering low power standby mode is not supported. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 25d9e72627e9..54075a07d2a1 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -509,7 +509,7 @@ config SENSORS_G762 config SENSORS_GPIO_FAN tristate "GPIO fan" - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST depends on THERMAL || THERMAL=n help If you say yes here you get support for fans connected to GPIO lines. @@ -1106,8 +1106,8 @@ config SENSORS_NTC_THERMISTOR send notifications about the temperature. Currently, this driver supports - NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333 - from Murata and B57330V2103 from EPCOS. + NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, + and NCP03WF104 from Murata and B57330V2103 from EPCOS. This driver can also be built as a module. If so, the module will be called ntc-thermistor. @@ -1186,7 +1186,7 @@ config SENSORS_PWM_FAN config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." - depends on GPIOLIB + depends on GPIOLIB || COMPILE_TEST help If you say yes here you get support for the Sensiron SHT10, SHT11, SHT15, SHT71, SHT75 humidity and temperature sensors. @@ -1452,6 +1452,16 @@ config SENSORS_INA2XX This driver can also be built as a module. If so, the module will be called ina2xx. +config SENSORS_TC74 + tristate "Microchip TC74" + depends on I2C + help + If you say yes here you get support for Microchip TC74 single + input temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tc74. + config SENSORS_THMC50 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index b4a40f17e2aa..ab904027f074 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -140,6 +140,7 @@ obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o +obj-$(CONFIG_SENSORS_TC74) += tc74.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP102) += tmp102.o obj-$(CONFIG_SENSORS_TMP103) += tmp103.o diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 4c829bb2f9db..f2f2f2fc755a 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -12,10 +12,9 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * + * The ATXP1 can reside on I2C addresses 0x37 or 0x4e. The chip is + * not auto-detected by the driver and must be instantiated explicitly. + * See Documentation/i2c/instantiating-devices for more information. */ #include <linux/kernel.h> @@ -43,8 +42,6 @@ MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); #define ATXP1_VIDMASK 0x1f #define ATXP1_GPIO1MASK 0x0f -static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; - struct atxp1_data { struct i2c_client *client; struct mutex update_lock; @@ -259,48 +256,6 @@ static struct attribute *atxp1_attrs[] = { }; ATTRIBUTE_GROUPS(atxp1); -/* Return 0 if detection is successful, -ENODEV otherwise */ -static int atxp1_detect(struct i2c_client *new_client, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = new_client->adapter; - - u8 temp; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - /* Detect ATXP1, checking if vendor ID registers are all zero */ - if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) && - (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) && - (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) && - (i2c_smbus_read_byte_data(new_client, 0xff) == 0))) - return -ENODEV; - - /* - * No vendor ID, now checking if registers 0x10,0x11 (non-existent) - * showing the same as register 0x00 - */ - temp = i2c_smbus_read_byte_data(new_client, 0x00); - - if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && - (i2c_smbus_read_byte_data(new_client, 0x11) == temp))) - return -ENODEV; - - /* Get VRM */ - temp = vid_which_vrm(); - - if ((temp != 90) && (temp != 91)) { - dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n", - temp / 10, temp % 10); - return -ENODEV; - } - - strlcpy(info->type, "atxp1", I2C_NAME_SIZE); - - return 0; -} - static int atxp1_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -314,6 +269,11 @@ static int atxp1_probe(struct i2c_client *client, /* Get VRM */ data->vrm = vid_which_vrm(); + if (data->vrm != 90 && data->vrm != 91) { + dev_err(dev, "atxp1: Not supporting VRM %d.%d\n", + data->vrm / 10, data->vrm % 10); + return -ENODEV; + } data->client = client; mutex_init(&data->update_lock); @@ -342,8 +302,6 @@ static struct i2c_driver atxp1_driver = { }, .probe = atxp1_probe, .id_table = atxp1_id, - .detect = atxp1_detect, - .address_list = normal_i2c, }; module_i2c_driver(atxp1_driver); diff --git a/drivers/hwmon/max197.c b/drivers/hwmon/max197.c index cb0dcfda958c..07628569547a 100644 --- a/drivers/hwmon/max197.c +++ b/drivers/hwmon/max197.c @@ -324,7 +324,7 @@ static int max197_remove(struct platform_device *pdev) return 0; } -static struct platform_device_id max197_device_ids[] = { +static const struct platform_device_id max197_device_ids[] = { { "max197", max197 }, { "max199", max199 }, { } diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index 68800115876b..dc0b76c5e302 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -53,6 +53,7 @@ static const struct platform_device_id ntc_thermistor_id[] = { { "ncp03wb473", TYPE_NCPXXWB473 }, { "ncp15wl333", TYPE_NCPXXWL333 }, { "b57330v2103", TYPE_B57330V2103}, + { "ncp03wf104", TYPE_NCPXXWF104 }, { }, }; @@ -135,6 +136,43 @@ static const struct ntc_compensation ncpXXwl333[] = { { .temp_c = 125, .ohm = 707 }, }; +static const struct ntc_compensation ncpXXwf104[] = { + { .temp_c = -40, .ohm = 4397119 }, + { .temp_c = -35, .ohm = 3088599 }, + { .temp_c = -30, .ohm = 2197225 }, + { .temp_c = -25, .ohm = 1581881 }, + { .temp_c = -20, .ohm = 1151037 }, + { .temp_c = -15, .ohm = 846579 }, + { .temp_c = -10, .ohm = 628988 }, + { .temp_c = -5, .ohm = 471632 }, + { .temp_c = 0, .ohm = 357012 }, + { .temp_c = 5, .ohm = 272500 }, + { .temp_c = 10, .ohm = 209710 }, + { .temp_c = 15, .ohm = 162651 }, + { .temp_c = 20, .ohm = 127080 }, + { .temp_c = 25, .ohm = 100000 }, + { .temp_c = 30, .ohm = 79222 }, + { .temp_c = 35, .ohm = 63167 }, + { .temp_c = 40, .ohm = 50677 }, + { .temp_c = 45, .ohm = 40904 }, + { .temp_c = 50, .ohm = 33195 }, + { .temp_c = 55, .ohm = 27091 }, + { .temp_c = 60, .ohm = 22224 }, + { .temp_c = 65, .ohm = 18323 }, + { .temp_c = 70, .ohm = 15184 }, + { .temp_c = 75, .ohm = 12635 }, + { .temp_c = 80, .ohm = 10566 }, + { .temp_c = 85, .ohm = 8873 }, + { .temp_c = 90, .ohm = 7481 }, + { .temp_c = 95, .ohm = 6337 }, + { .temp_c = 100, .ohm = 5384 }, + { .temp_c = 105, .ohm = 4594 }, + { .temp_c = 110, .ohm = 3934 }, + { .temp_c = 115, .ohm = 3380 }, + { .temp_c = 120, .ohm = 2916 }, + { .temp_c = 125, .ohm = 2522 }, +}; + /* * The following compensation table is from the specification of EPCOS NTC * Thermistors Datasheet @@ -190,20 +228,21 @@ struct ntc_data { static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata) { struct iio_channel *channel = pdata->chan; - s64 result; - int val, ret; + int raw, uv, ret; - ret = iio_read_channel_raw(channel, &val); + ret = iio_read_channel_raw(channel, &raw); if (ret < 0) { pr_err("read channel() error: %d\n", ret); return ret; } - /* unit: mV */ - result = pdata->pullup_uv * (s64) val; - result >>= 12; + ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000); + if (ret < 0) { + /* Assume 12 bit ADC with vref at pullup_uv */ + uv = (pdata->pullup_uv * (s64)raw) >> 12; + } - return (int)result; + return uv; } static const struct of_device_id ntc_match[] = { @@ -219,6 +258,8 @@ static const struct of_device_id ntc_match[] = { .data = &ntc_thermistor_id[4] }, { .compatible = "epcos,b57330v2103", .data = &ntc_thermistor_id[5]}, + { .compatible = "murata,ncp03wf104", + .data = &ntc_thermistor_id[6] }, /* Usage of vendor name "ntc" is deprecated */ { .compatible = "ntc,ncp15wb473", @@ -309,30 +350,27 @@ static inline u64 div64_u64_safe(u64 dividend, u64 divisor) static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uv) { struct ntc_thermistor_platform_data *pdata = data->pdata; - u64 mv = uv / 1000; - u64 pmv = pdata->pullup_uv / 1000; + u32 puv = pdata->pullup_uv; u64 n, puo, pdo; puo = pdata->pullup_ohm; pdo = pdata->pulldown_ohm; - if (mv == 0) { - if (pdata->connect == NTC_CONNECTED_POSITIVE) - return INT_MAX; - return 0; - } - if (mv >= pmv) + if (uv == 0) + return (pdata->connect == NTC_CONNECTED_POSITIVE) ? + INT_MAX : 0; + if (uv >= puv) return (pdata->connect == NTC_CONNECTED_POSITIVE) ? 0 : INT_MAX; if (pdata->connect == NTC_CONNECTED_POSITIVE && puo == 0) - n = div64_u64_safe(pdo * (pmv - mv), mv); + n = div_u64(pdo * (puv - uv), uv); else if (pdata->connect == NTC_CONNECTED_GROUND && pdo == 0) - n = div64_u64_safe(puo * mv, pmv - mv); + n = div_u64(puo * uv, puv - uv); else if (pdata->connect == NTC_CONNECTED_POSITIVE) - n = div64_u64_safe(pdo * puo * (pmv - mv), - puo * mv - pdo * (pmv - mv)); + n = div64_u64_safe(pdo * puo * (puv - uv), + puo * uv - pdo * (puv - uv)); else - n = div64_u64_safe(pdo * puo * mv, pdo * (pmv - mv) - puo * mv); + n = div64_u64_safe(pdo * puo * uv, pdo * (puv - uv) - puo * uv); if (n > INT_MAX) n = INT_MAX; @@ -567,6 +605,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev) data->comp = b57330v2103; data->n_comp = ARRAY_SIZE(b57330v2103); break; + case TYPE_NCPXXWF104: + data->comp = ncpXXwf104; + data->n_comp = ARRAY_SIZE(ncpXXwf104); + break; default: dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n", pdev_id->driver_data, pdev_id->name); diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index d4f0935daaa1..497a7f822a12 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -1074,7 +1074,7 @@ static int sht15_remove(struct platform_device *pdev) return 0; } -static struct platform_device_id sht15_device_ids[] = { +static const struct platform_device_id sht15_device_ids[] = { { "sht10", sht10 }, { "sht11", sht11 }, { "sht15", sht15 }, diff --git a/drivers/hwmon/tc74.c b/drivers/hwmon/tc74.c new file mode 100644 index 000000000000..d95165158800 --- /dev/null +++ b/drivers/hwmon/tc74.c @@ -0,0 +1,177 @@ +/* + * An hwmon driver for the Microchip TC74 + * + * Copyright 2015 Maciej Szmigiero <mail@maciej.szmigiero.name> + * + * Based on ad7414.c: + * Copyright 2006 Stefan Roese, DENX Software Engineering + * Copyright 2008 Sean MacLennan, PIKA Technologies + * Copyright 2008 Frank Edelhaeuser, Spansion Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/i2c.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +/* TC74 registers */ +#define TC74_REG_TEMP 0x00 +#define TC74_REG_CONFIG 0x01 + +struct tc74_data { + struct i2c_client *client; + struct mutex lock; /* atomic read data updates */ + bool valid; /* validity of fields below */ + unsigned long next_update; /* In jiffies */ + s8 temp_input; /* Temp value in dC */ +}; + +static int tc74_update_device(struct device *dev) +{ + struct tc74_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int ret; + + ret = mutex_lock_interruptible(&data->lock); + if (ret) + return ret; + + if (time_after(jiffies, data->next_update) || !data->valid) { + s32 value; + + value = i2c_smbus_read_byte_data(client, TC74_REG_CONFIG); + if (value < 0) { + dev_dbg(&client->dev, "TC74_REG_CONFIG read err %d\n", + (int)value); + + ret = value; + goto ret_unlock; + } + + if (!(value & BIT(6))) { + /* not ready yet */ + + ret = -EAGAIN; + goto ret_unlock; + } + + value = i2c_smbus_read_byte_data(client, TC74_REG_TEMP); + if (value < 0) { + dev_dbg(&client->dev, "TC74_REG_TEMP read err %d\n", + (int)value); + + ret = value; + goto ret_unlock; + } + + data->temp_input = value; + data->next_update = jiffies + HZ / 4; + data->valid = true; + } + +ret_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static ssize_t show_temp_input(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tc74_data *data = dev_get_drvdata(dev); + int ret; + + ret = tc74_update_device(dev); + if (ret) + return ret; + + return sprintf(buf, "%d\n", data->temp_input * 1000); +} +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0); + +static struct attribute *tc74_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +ATTRIBUTE_GROUPS(tc74); + +static int tc74_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct device *dev = &client->dev; + struct tc74_data *data; + struct device *hwmon_dev; + s32 conf; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EOPNOTSUPP; + + data = devm_kzalloc(dev, sizeof(struct tc74_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->lock); + + /* Make sure the chip is powered up. */ + conf = i2c_smbus_read_byte_data(client, TC74_REG_CONFIG); + if (conf < 0) { + dev_err(dev, "unable to read config register\n"); + + return conf; + } + + if (conf & 0x3f) { + dev_err(dev, "invalid config register value\n"); + + return -ENODEV; + } + + if (conf & BIT(7)) { + s32 ret; + + conf &= ~BIT(7); + + ret = i2c_smbus_write_byte_data(client, TC74_REG_CONFIG, conf); + if (ret) + dev_warn(dev, "unable to disable STANDBY\n"); + } + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, + client->name, + data, tc74_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id tc74_id[] = { + { "tc74", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, tc74_id); + +static struct i2c_driver tc74_driver = { + .driver = { + .name = "tc74", + }, + .probe = tc74_probe, + .id_table = tc74_id, +}; + +module_i2c_driver(tc74_driver); + +MODULE_AUTHOR("Maciej Szmigiero <mail@maciej.szmigiero.name>"); + +MODULE_DESCRIPTION("TC74 driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index 0a6de4ca4930..aed170588b74 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -27,6 +27,7 @@ enum ntc_thermistor_type { TYPE_NCPXXWB473, TYPE_NCPXXWL333, TYPE_B57330V2103, + TYPE_NCPXXWF104, }; struct ntc_thermistor_platform_data { |