diff options
| -rw-r--r-- | drivers/regulator/bd71837-regulator.c | 19 | ||||
| -rw-r--r-- | drivers/regulator/core.c | 4 | ||||
| -rw-r--r-- | drivers/regulator/of_regulator.c | 2 | ||||
| -rw-r--r-- | include/linux/mfd/rohm-bd718x7.h | 33 | ||||
| -rw-r--r-- | include/linux/regulator/machine.h | 6 |
5 files changed, 54 insertions, 10 deletions
diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c index 0f8ac8dec3e1..a1bd8aaf4d98 100644 --- a/drivers/regulator/bd71837-regulator.c +++ b/drivers/regulator/bd71837-regulator.c @@ -569,6 +569,25 @@ static int bd71837_probe(struct platform_device *pdev) BD71837_REG_REGLOCK); } + /* + * There is a HW quirk in BD71837. The shutdown sequence timings for + * bucks/LDOs which are controlled via register interface are changed. + * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the + * beginning of shut-down sequence. As bucks 6 and 7 are parent + * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage + * monitoring to errorneously detect under voltage and force PMIC to + * emergency state instead of poweroff. In order to avoid this we + * disable voltage monitoring for LDO5 and LDO6 + */ + err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_MVRFLTMASK2, + BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80, + BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80); + if (err) { + dev_err(&pmic->pdev->dev, + "Failed to disable voltage monitoring\n"); + goto err; + } + for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) { struct regulator_desc *desc; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index bb1324f93143..9577d8941846 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3161,7 +3161,7 @@ static inline int regulator_suspend_toggle(struct regulator_dev *rdev, if (!rstate->changeable) return -EPERM; - rstate->enabled = en; + rstate->enabled = (en) ? ENABLE_IN_SUSPEND : DISABLE_IN_SUSPEND; return 0; } @@ -4395,13 +4395,13 @@ regulator_register(const struct regulator_desc *regulator_desc, !rdev->desc->fixed_uV) rdev->is_switch = true; + dev_set_drvdata(&rdev->dev, rdev); ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); goto unset_supplies; } - dev_set_drvdata(&rdev->dev, rdev); rdev_init_debugfs(rdev); /* try to resolve regulators supply since a new one was registered */ diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 638f17d4c848..210fc20f7de7 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -213,8 +213,6 @@ static void of_get_regulation_constraints(struct device_node *np, else if (of_property_read_bool(suspend_np, "regulator-off-in-suspend")) suspend_state->enabled = DISABLE_IN_SUSPEND; - else - suspend_state->enabled = DO_NOTHING_IN_SUSPEND; if (!of_property_read_u32(np, "regulator-suspend-min-microvolt", &pval)) diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h index a528747f8aed..e8338e5dc10b 100644 --- a/include/linux/mfd/rohm-bd718x7.h +++ b/include/linux/mfd/rohm-bd718x7.h @@ -78,9 +78,9 @@ enum { BD71837_REG_TRANS_COND0 = 0x1F, BD71837_REG_TRANS_COND1 = 0x20, BD71837_REG_VRFAULTEN = 0x21, - BD71837_REG_MVRFLTMASK0 = 0x22, - BD71837_REG_MVRFLTMASK1 = 0x23, - BD71837_REG_MVRFLTMASK2 = 0x24, + BD718XX_REG_MVRFLTMASK0 = 0x22, + BD718XX_REG_MVRFLTMASK1 = 0x23, + BD718XX_REG_MVRFLTMASK2 = 0x24, BD71837_REG_RCVCFG = 0x25, BD71837_REG_RCVNUM = 0x26, BD71837_REG_PWRONCONFIG0 = 0x27, @@ -159,6 +159,33 @@ enum { #define BUCK8_MASK 0x3F #define BUCK8_DEFAULT 0x1E +/* BD718XX Voltage monitoring masks */ +#define BD718XX_BUCK1_VRMON80 0x1 +#define BD718XX_BUCK1_VRMON130 0x2 +#define BD718XX_BUCK2_VRMON80 0x4 +#define BD718XX_BUCK2_VRMON130 0x8 +#define BD718XX_1ST_NODVS_BUCK_VRMON80 0x1 +#define BD718XX_1ST_NODVS_BUCK_VRMON130 0x2 +#define BD718XX_2ND_NODVS_BUCK_VRMON80 0x4 +#define BD718XX_2ND_NODVS_BUCK_VRMON130 0x8 +#define BD718XX_3RD_NODVS_BUCK_VRMON80 0x10 +#define BD718XX_3RD_NODVS_BUCK_VRMON130 0x20 +#define BD718XX_4TH_NODVS_BUCK_VRMON80 0x40 +#define BD718XX_4TH_NODVS_BUCK_VRMON130 0x80 +#define BD718XX_LDO1_VRMON80 0x1 +#define BD718XX_LDO2_VRMON80 0x2 +#define BD718XX_LDO3_VRMON80 0x4 +#define BD718XX_LDO4_VRMON80 0x8 +#define BD718XX_LDO5_VRMON80 0x10 +#define BD718XX_LDO6_VRMON80 0x20 + +/* BD71837 specific voltage monitoring masks */ +#define BD71837_BUCK3_VRMON80 0x10 +#define BD71837_BUCK3_VRMON130 0x20 +#define BD71837_BUCK4_VRMON80 0x40 +#define BD71837_BUCK4_VRMON130 0x80 +#define BD71837_LDO7_VRMON80 0x40 + /* BD71837_REG_IRQ bits */ #define IRQ_SWRST 0x40 #define IRQ_PWRON_S 0x20 diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 3468703d663a..a459a5e973a7 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -48,9 +48,9 @@ struct regulator; * DISABLE_IN_SUSPEND - turn off regulator in suspend states * ENABLE_IN_SUSPEND - keep regulator on in suspend states */ -#define DO_NOTHING_IN_SUSPEND (-1) -#define DISABLE_IN_SUSPEND 0 -#define ENABLE_IN_SUSPEND 1 +#define DO_NOTHING_IN_SUSPEND 0 +#define DISABLE_IN_SUSPEND 1 +#define ENABLE_IN_SUSPEND 2 /* Regulator active discharge flags */ enum regulator_active_discharge { |