diff options
| -rw-r--r-- | drivers/tty/serial/omap-serial.c | 28 |
1 files changed, 11 insertions, 17 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index fbce4c2e55cf..7180ffc847e8 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -898,31 +898,30 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, else serial_out(up, UART_OMAP_MDR1, up->mdr1); - /* Hardware Flow Control Configuration */ + /* Enable access to TCR/TLR */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { - /* Enable access to TCR/TLR */ - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + /* Hardware Flow Control Configuration */ + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { /* Enable AUTORTS and AUTOCTS */ up->efr |= UART_EFR_CTS | UART_EFR_RTS; /* Ensure MCR RTS is asserted */ up->mcr |= UART_MCR_RTS; - - /* Disable access to TCR/TLR */ - serial_out(up, UART_MCR, up->mcr); } else { /* Disable AUTORTS and AUTOCTS */ up->efr &= ~(UART_EFR_CTS | UART_EFR_RTS); } if (up->port.flags & UPF_SOFT_FLOW) { + /* Disable access to TCR/TLR */ + serial_out(up, UART_MCR, up->mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, up->efr); @@ -961,14 +960,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->mcr |= UART_MCR_XONANY; else up->mcr &= ~UART_MCR_XONANY; - - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr); } + serial_out(up, UART_MCR, up->mcr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, up->lcr); |