diff options
-rw-r--r-- | Documentation/i2c/smbus-protocol | 8 | ||||
-rw-r--r-- | drivers/i2c/algos/i2c-algo-bit.c | 24 | ||||
-rw-r--r-- | drivers/i2c/algos/i2c-algo-pca.c | 6 | ||||
-rw-r--r-- | drivers/i2c/busses/Kconfig | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/scx200_acb.c | 6 | ||||
-rw-r--r-- | include/linux/i2c.h | 17 |
6 files changed, 46 insertions, 17 deletions
diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol index 7c19d1a2bea0..49f5b680809d 100644 --- a/Documentation/i2c/smbus-protocol +++ b/Documentation/i2c/smbus-protocol @@ -88,6 +88,10 @@ byte. But this time, the data is a complete word (16 bits). S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P +Note the convenience function i2c_smbus_read_word_swapped is +available for reads where the two data bytes are the other way +around (not SMBus compliant, but very popular.) + SMBus Write Byte: i2c_smbus_write_byte_data() ============================================== @@ -108,6 +112,10 @@ specified through the Comm byte. S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A] P +Note the convenience function i2c_smbus_write_word_swapped is +available for writes where the two data bytes are the other way +around (not SMBus compliant, but very popular.) + SMBus Process Call: i2c_smbus_process_call() ============================================= diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index d6d58684712b..85584a547c25 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -47,8 +47,8 @@ /* ----- global variables --------------------------------------------- */ static int bit_test; /* see if the line-setting functions work */ -module_param(bit_test, bool, 0); -MODULE_PARM_DESC(bit_test, "Test the lines of the bus to see if it is stuck"); +module_param(bit_test, int, S_IRUGO); +MODULE_PARM_DESC(bit_test, "lines testing - 0 off; 1 report; 2 fail if stuck"); #ifdef DEBUG static int i2c_debug = 1; @@ -250,7 +250,9 @@ static int test_bus(struct i2c_adapter *i2c_adap) sda = getsda(adap); scl = (adap->getscl == NULL) ? 1 : getscl(adap); if (!scl || !sda) { - printk(KERN_WARNING "%s: bus seems to be busy\n", name); + printk(KERN_WARNING + "%s: bus seems to be busy (scl=%d, sda=%d)\n", + name, scl, sda); goto bailout; } @@ -441,7 +443,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) acknak(i2c_adap, 0); dev_err(&i2c_adap->dev, "readbytes: invalid " "block length (%d)\n", inval); - return -EREMOTEIO; + return -EPROTO; } /* The original count value accounts for the extra bytes, that is, either 1 for a regular transaction, @@ -470,7 +472,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) * reads, writes as well as 10bit-addresses. * returns: * 0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set - * -x an error occurred (like: -EREMOTEIO if the device did not answer, or + * -x an error occurred (like: -ENXIO if the device did not answer, or * -ETIMEDOUT, for example if the lines are stuck...) */ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) @@ -493,14 +495,14 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) if ((ret != 1) && !nak_ok) { dev_err(&i2c_adap->dev, "died at extended address code\n"); - return -EREMOTEIO; + return -ENXIO; } /* the remaining 8 bit address */ ret = i2c_outb(i2c_adap, msg->addr & 0x7f); if ((ret != 1) && !nak_ok) { /* the chip did not ack / xmission error occurred */ dev_err(&i2c_adap->dev, "died at 2nd address code\n"); - return -EREMOTEIO; + return -ENXIO; } if (flags & I2C_M_RD) { bit_dbg(3, &i2c_adap->dev, "emitting repeated " @@ -512,7 +514,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) if ((ret != 1) && !nak_ok) { dev_err(&i2c_adap->dev, "died at repeated address code\n"); - return -EREMOTEIO; + return -EIO; } } } else { /* normal 7bit address */ @@ -570,7 +572,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap, ret, ret == 1 ? "" : "s"); if (ret < pmsg->len) { if (ret >= 0) - ret = -EREMOTEIO; + ret = -EIO; goto bailout; } } else { @@ -581,7 +583,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap, ret, ret == 1 ? "" : "s"); if (ret < pmsg->len) { if (ret >= 0) - ret = -EREMOTEIO; + ret = -EIO; goto bailout; } } @@ -624,7 +626,7 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap, if (bit_test) { ret = test_bus(adap); - if (ret < 0) + if (bit_test >= 2 && ret < 0) return -ENODEV; } diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 4ca9cf9cde73..beb9ffe2564b 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -196,7 +196,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, } else { dev_dbg(&i2c_adap->dev, "bus is not idle. status is " "%#04x\n", state); - return -EAGAIN; + return -EBUSY; } } @@ -224,7 +224,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, } curmsg = 0; - ret = -EREMOTEIO; + ret = -EIO; while (curmsg < num) { state = pca_status(adap); @@ -259,6 +259,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, case 0x20: /* SLA+W has been transmitted; NOT ACK has been received */ DEB2("NOT ACK received after SLA+W\n"); pca_stop(adap); + ret = -ENXIO; goto out; case 0x40: /* SLA+R has been transmitted; ACK has been received */ @@ -283,6 +284,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, case 0x48: /* SLA+R has been transmitted; NOT ACK has been received */ DEB2("NOT ACK received after SLA+R\n"); pca_stop(adap); + ret = -ENXIO; goto out; case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 646068e5100b..d1fc5cf9aa4d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -789,7 +789,7 @@ config I2C_ACORN config I2C_ELEKTOR tristate "Elektor ISA card" - depends on ISA && BROKEN_ON_SMP + depends on ISA && HAS_IOPORT && BROKEN_ON_SMP select I2C_ALGOPCF help This supports the PCF8584 ISA bus I2C adapter. Say Y if you own diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 986e5f62debe..91e349c884c5 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -550,7 +550,7 @@ static int __devexit scx200_remove(struct platform_device *pdev) return 0; } -static struct platform_driver scx200_pci_drv = { +static struct platform_driver scx200_pci_driver = { .driver = { .name = "cs5535-smb", .owner = THIS_MODULE, @@ -593,14 +593,14 @@ static int __init scx200_acb_init(void) return 0; /* No ISA devices; register the platform driver for PCI-based devices */ - return platform_driver_register(&scx200_pci_drv); + return platform_driver_register(&scx200_pci_driver); } static void __exit scx200_acb_cleanup(void) { struct scx200_acb_iface *iface; - platform_driver_unregister(&scx200_pci_drv); + platform_driver_unregister(&scx200_pci_driver); mutex_lock(&scx200_acb_list_mutex); while ((iface = scx200_acb_list) != NULL) { diff --git a/include/linux/i2c.h b/include/linux/i2c.h index a6c652ef516d..38a21c3edd2c 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -34,6 +34,7 @@ #include <linux/sched.h> /* for completion */ #include <linux/mutex.h> #include <linux/of.h> /* for struct device_node */ +#include <linux/swab.h> /* for swab16 */ extern struct bus_type i2c_bus_type; extern struct device_type i2c_adapter_type; @@ -88,6 +89,22 @@ extern s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command); extern s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command, u16 value); + +static inline s32 +i2c_smbus_read_word_swapped(const struct i2c_client *client, u8 command) +{ + s32 value = i2c_smbus_read_word_data(client, command); + + return (value < 0) ? value : swab16(value); +} + +static inline s32 +i2c_smbus_write_word_swapped(const struct i2c_client *client, + u8 command, u16 value) +{ + return i2c_smbus_write_word_data(client, command, swab16(value)); +} + /* Returns the number of read bytes */ extern s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command, u8 *values); |