summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/configs/marzen_defconfig14
-rw-r--r--arch/arm/mach-shmobile/Kconfig2
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c139
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c38
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c74
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c186
6 files changed, 205 insertions, 248 deletions
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 5b8215f424c5..728a43c446f8 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -47,6 +47,8 @@ CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_FARADAY is not set
@@ -59,9 +61,8 @@ CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
@@ -78,9 +79,16 @@ CONFIG_GPIO_SYSFS=y
CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_SSB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_RCAR_PHY=y
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4eddca14ae07..9255546e7bf6 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -29,6 +29,8 @@ config ARCH_R8A7779
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
+ select USB_ARCH_HAS_EHCI
+ select USB_ARCH_HAS_OHCI
config ARCH_EMEV2
bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index cefdd030361d..40657854e3ad 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -658,133 +658,16 @@ static struct platform_device lcdc_device = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
-static int __fsi_set_rate(struct clk *clk, long rate, int enable)
-{
- int ret = 0;
-
- if (rate <= 0)
- return ret;
-
- if (enable) {
- ret = clk_set_rate(clk, rate);
- if (0 == ret)
- ret = clk_enable(clk);
- } else {
- clk_disable(clk);
- }
-
- return ret;
-}
-
-static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
-{
- return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
-}
-
-static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
-{
- struct clk *fsia_ick;
- struct clk *fsiack;
- int ret = -EIO;
-
- fsia_ick = clk_get(dev, "icka");
- if (IS_ERR(fsia_ick))
- return PTR_ERR(fsia_ick);
-
- /*
- * FSIACK is connected to AK4642,
- * and use external clock pin from it.
- * it is parent of fsia_ick now.
- */
- fsiack = clk_get_parent(fsia_ick);
- if (!fsiack)
- goto fsia_ick_out;
-
- /*
- * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
- *
- ** FIXME **
- * Because the freq_table of external clk (fsiack) are all 0,
- * the return value of clk_round_rate became 0.
- * So, it use __fsi_set_rate here.
- */
- ret = __fsi_set_rate(fsiack, rate, enable);
- if (ret < 0)
- goto fsiack_out;
-
- ret = __fsi_set_round_rate(fsia_ick, rate, enable);
- if ((ret < 0) && enable)
- __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
-
-fsiack_out:
- clk_put(fsiack);
-
-fsia_ick_out:
- clk_put(fsia_ick);
-
- return 0;
-}
-
-static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
-{
- struct clk *fsib_clk;
- struct clk *fdiv_clk = clk_get(NULL, "fsidivb");
- long fsib_rate = 0;
- long fdiv_rate = 0;
- int ackmd_bpfmd;
- int ret;
-
- switch (rate) {
- case 44100:
- fsib_rate = rate * 256;
- ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
- break;
- case 48000:
- fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
- fdiv_rate = rate * 256;
- ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
- break;
- default:
- pr_err("unsupported rate in FSI2 port B\n");
- return -EINVAL;
- }
-
- /* FSI B setting */
- fsib_clk = clk_get(dev, "ickb");
- if (IS_ERR(fsib_clk))
- return -EIO;
-
- ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
- if (ret < 0)
- goto fsi_set_rate_end;
-
- /* FSI DIV setting */
- ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
- if (ret < 0) {
- /* disable FSI B */
- if (enable)
- __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
- goto fsi_set_rate_end;
- }
-
- ret = ackmd_bpfmd;
-
-fsi_set_rate_end:
- clk_put(fsib_clk);
- return ret;
-}
-
static struct sh_fsi_platform_info fsi_info = {
.port_a = {
.flags = SH_FSI_BRS_INV,
- .set_rate = fsi_ak4642_set_rate,
},
.port_b = {
.flags = SH_FSI_BRS_INV |
SH_FSI_BRM_INV |
SH_FSI_LRS_INV |
+ SH_FSI_CLK_CPG |
SH_FSI_FMT_SPDIF,
- .set_rate = fsi_hdmi_set_rate,
},
};
@@ -1144,25 +1027,6 @@ out:
clk_put(hdmi_ick);
}
-static void __init fsi_init_pm_clock(void)
-{
- struct clk *fsia_ick;
- int ret;
-
- fsia_ick = clk_get(&fsi_device.dev, "icka");
- if (IS_ERR(fsia_ick)) {
- ret = PTR_ERR(fsia_ick);
- pr_err("Cannot get FSI ICK: %d\n", ret);
- return;
- }
-
- ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
- if (ret < 0)
- pr_err("Cannot set FSI-A parent: %d\n", ret);
-
- clk_put(fsia_ick);
-}
-
/* TouchScreen */
#ifdef CONFIG_AP4EVB_QHD
# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123
@@ -1476,7 +1340,6 @@ static void __init ap4evb_init(void)
ARRAY_SIZE(domain_devices));
hdmi_init_pm_clock();
- fsi_init_pm_clock();
sh7372_pm_init();
pm_clk_add(&fsi_device.dev, "spu2");
pm_clk_add(&lcdc1_device.dev, "hdmi");
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 499e6e376666..5353adf6b828 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -768,32 +768,6 @@ static struct platform_device ceu0_device = {
};
/* FSI */
-static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
-{
- struct clk *fsib;
- int ret;
-
- /* it support 48KHz only */
- if (48000 != rate)
- return -EINVAL;
-
- fsib = clk_get(dev, "ickb");
- if (IS_ERR(fsib))
- return -EINVAL;
-
- if (enable) {
- ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
- clk_enable(fsib);
- } else {
- ret = 0;
- clk_disable(fsib);
- }
-
- clk_put(fsib);
-
- return ret;
-}
-
static struct sh_fsi_platform_info fsi_info = {
/* FSI-WM8978 */
.port_a = {
@@ -802,8 +776,8 @@ static struct sh_fsi_platform_info fsi_info = {
/* FSI-HDMI */
.port_b = {
.flags = SH_FSI_FMT_SPDIF |
- SH_FSI_ENABLE_STREAM_MODE,
- .set_rate = fsi_hdmi_set_rate,
+ SH_FSI_ENABLE_STREAM_MODE |
+ SH_FSI_CLK_CPG,
.tx_id = SHDMA_SLAVE_FSIB_TX,
}
};
@@ -938,13 +912,11 @@ static void __init eva_clock_init(void)
struct clk *xtal1 = clk_get(NULL, "extal1");
struct clk *usb24s = clk_get(NULL, "usb24s");
struct clk *fsibck = clk_get(NULL, "fsibck");
- struct clk *fsib = clk_get(&fsi_device.dev, "ickb");
if (IS_ERR(system) ||
IS_ERR(xtal1) ||
IS_ERR(usb24s) ||
- IS_ERR(fsibck) ||
- IS_ERR(fsib)) {
+ IS_ERR(fsibck)) {
pr_err("armadillo800eva board clock init failed\n");
goto clock_error;
}
@@ -956,9 +928,7 @@ static void __init eva_clock_init(void)
clk_set_parent(usb24s, system);
/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
- clk_set_parent(fsib, fsibck);
clk_set_rate(fsibck, 12288000);
- clk_set_rate(fsib, 12288000);
clock_error:
if (!IS_ERR(system))
@@ -969,8 +939,6 @@ clock_error:
clk_put(usb24s);
if (!IS_ERR(fsibck))
clk_put(fsibck);
- if (!IS_ERR(fsib))
- clk_put(fsib);
}
/*
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f274252e4705..bf2bcb92b426 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -816,6 +816,8 @@ static struct platform_device usbhs1_device = {
.id = 1,
.dev = {
.platform_data = &usbhs1_private.info,
+ .dma_mask = &usbhs1_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(usbhs1_resources),
.resource = usbhs1_resources,
@@ -860,76 +862,6 @@ static struct platform_device leds_device = {
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
-static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
-{
- int ret;
-
- if (rate <= 0)
- return 0;
-
- if (!enable) {
- clk_disable(clk);
- return 0;
- }
-
- ret = clk_set_rate(clk, clk_round_rate(clk, rate));
- if (ret < 0)
- return ret;
-
- return clk_enable(clk);
-}
-
-static int fsi_b_set_rate(struct device *dev, int rate, int enable)
-{
- struct clk *fsib_clk;
- struct clk *fdiv_clk = clk_get(NULL, "fsidivb");
- long fsib_rate = 0;
- long fdiv_rate = 0;
- int ackmd_bpfmd;
- int ret;
-
- /* clock start */
- switch (rate) {
- case 44100:
- fsib_rate = rate * 256;
- ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
- break;
- case 48000:
- fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
- fdiv_rate = rate * 256;
- ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
- break;
- default:
- pr_err("unsupported rate in FSI2 port B\n");
- return -EINVAL;
- }
-
- /* FSI B setting */
- fsib_clk = clk_get(dev, "ickb");
- if (IS_ERR(fsib_clk))
- return -EIO;
-
- /* fsib */
- ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
- if (ret < 0)
- goto fsi_set_rate_end;
-
- /* FSI DIV */
- ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
- if (ret < 0) {
- /* disable FSI B */
- if (enable)
- __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
- goto fsi_set_rate_end;
- }
-
- ret = ackmd_bpfmd;
-
-fsi_set_rate_end:
- clk_put(fsib_clk);
- return ret;
-}
-
static struct sh_fsi_platform_info fsi_info = {
.port_a = {
.flags = SH_FSI_BRS_INV,
@@ -940,8 +872,8 @@ static struct sh_fsi_platform_info fsi_info = {
.flags = SH_FSI_BRS_INV |
SH_FSI_BRM_INV |
SH_FSI_LRS_INV |
+ SH_FSI_CLK_CPG |
SH_FSI_FMT_SPDIF,
- .set_rate = fsi_b_set_rate,
}
};
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 69f7f464eff8..449f9289567d 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -34,6 +34,10 @@
#include <linux/spi/sh_hspi.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/pm_runtime.h>
#include <mach/hardware.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
@@ -144,13 +148,185 @@ static struct platform_device hspi_device = {
.num_resources = ARRAY_SIZE(hspi_resources),
};
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+ [0] = {
+ .start = 0xffe70000,
+ .end = 0xffe70900 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0xfff70000,
+ .end = 0xfff70900 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device usb_phy_device = {
+ .name = "rcar_usb_phy",
+ .resource = usb_phy_resources,
+ .num_resources = ARRAY_SIZE(usb_phy_resources),
+};
+
static struct platform_device *marzen_devices[] __initdata = {
&eth_device,
&sdhi0_device,
&thermal_device,
&hspi_device,
+ &usb_phy_device,
+};
+
+/* USB */
+static struct usb_phy *phy;
+static int usb_power_on(struct platform_device *pdev)
+{
+ if (!phy)
+ return -EIO;
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ usb_phy_init(phy);
+
+ return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+ if (!phy)
+ return;
+
+ usb_phy_shutdown(phy);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+ .power_on = usb_power_on,
+ .power_off = usb_power_off,
+ .power_suspend = usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+ [0] = {
+ .start = 0xffe70000,
+ .end = 0xffe70400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(44),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ehci0_device = {
+ .name = "ehci-platform",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci0_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &ehcix_pdata,
+ },
+ .num_resources = ARRAY_SIZE(ehci0_resources),
+ .resource = ehci0_resources,
};
+static struct resource ehci1_resources[] = {
+ [0] = {
+ .start = 0xfff70000,
+ .end = 0xfff70400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(45),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ehci1_device = {
+ .name = "ehci-platform",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci1_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &ehcix_pdata,
+ },
+ .num_resources = ARRAY_SIZE(ehci1_resources),
+ .resource = ehci1_resources,
+};
+
+static struct usb_ohci_pdata ohcix_pdata = {
+ .power_on = usb_power_on,
+ .power_off = usb_power_off,
+ .power_suspend = usb_power_off,
+};
+
+static struct resource ohci0_resources[] = {
+ [0] = {
+ .start = 0xffe70400,
+ .end = 0xffe70800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(44),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ohci0_device = {
+ .name = "ohci-platform",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ohci0_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &ohcix_pdata,
+ },
+ .num_resources = ARRAY_SIZE(ohci0_resources),
+ .resource = ohci0_resources,
+};
+
+static struct resource ohci1_resources[] = {
+ [0] = {
+ .start = 0xfff70400,
+ .end = 0xfff70800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(45),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ohci1_device = {
+ .name = "ohci-platform",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ohci1_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &ohcix_pdata,
+ },
+ .num_resources = ARRAY_SIZE(ohci1_resources),
+ .resource = ohci1_resources,
+};
+
+static struct platform_device *marzen_late_devices[] __initdata = {
+ &ehci0_device,
+ &ehci1_device,
+ &ohci0_device,
+ &ohci1_device,
+};
+
+void __init marzen_init_late(void)
+{
+ /* get usb phy */
+ phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+ shmobile_init_late();
+ platform_add_devices(marzen_late_devices,
+ ARRAY_SIZE(marzen_late_devices));
+}
+
static void __init marzen_init(void)
{
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
@@ -188,6 +364,14 @@ static void __init marzen_init(void)
gpio_request(GPIO_FN_HSPI_TX0, NULL);
gpio_request(GPIO_FN_HSPI_RX0, NULL);
+ /* USB (CN21) */
+ gpio_request(GPIO_FN_USB_OVC0, NULL);
+ gpio_request(GPIO_FN_USB_OVC1, NULL);
+ gpio_request(GPIO_FN_USB_OVC2, NULL);
+
+ /* USB (CN22) */
+ gpio_request(GPIO_FN_USB_PENC2, NULL);
+
r8a7779_add_standard_devices();
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
}
@@ -200,6 +384,6 @@ MACHINE_START(MARZEN, "marzen")
.init_irq = r8a7779_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = marzen_init,
- .init_late = shmobile_init_late,
+ .init_late = marzen_init_late,
.timer = &shmobile_timer,
MACHINE_END
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 05:43:36 +0100