diff options
| -rw-r--r-- | drivers/net/phy/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/phy/cortina.c | 118 |
3 files changed, 124 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index c360dd6ead22..0c516d3229d0 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -234,6 +234,11 @@ config CICADA_PHY ---help--- Currently supports the cis8204 +config CORTINA_PHY + tristate "Cortina EDC CDR 10G Ethernet PHY" + ---help--- + Currently supports the CS4340 phy. + config DAVICOM_PHY tristate "Davicom PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index e36db9a2ba38..e2fde094f63d 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_CICADA_PHY) += cicada.o +obj-$(CONFIG_CORTINA_PHY) += cortina.o obj-$(CONFIG_DAVICOM_PHY) += davicom.o obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_DP83848_PHY) += dp83848.o diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c new file mode 100644 index 000000000000..72f4228a63bb --- /dev/null +++ b/drivers/net/phy/cortina.c @@ -0,0 +1,118 @@ +/* + * Copyright 2017 NXP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * CORTINA is a registered trademark of Cortina Systems, Inc. + * + */ +#include <linux/module.h> +#include <linux/phy.h> + +#define PHY_ID_CS4340 0x13e51002 + +#define VILLA_GLOBAL_CHIP_ID_LSB 0x0 +#define VILLA_GLOBAL_CHIP_ID_MSB 0x1 + +#define VILLA_GLOBAL_GPIO_1_INTS 0x017 + +static int cortina_read_reg(struct phy_device *phydev, u16 regnum) +{ + return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, + MII_ADDR_C45 | regnum); +} + +static int cortina_config_aneg(struct phy_device *phydev) +{ + phydev->supported = SUPPORTED_10000baseT_Full; + phydev->advertising = SUPPORTED_10000baseT_Full; + + return 0; +} + +static int cortina_read_status(struct phy_device *phydev) +{ + int gpio_int_status, ret = 0; + + gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS); + if (gpio_int_status < 0) { + ret = gpio_int_status; + goto err; + } + + if (gpio_int_status & 0x8) { + /* up when edc_convergedS set */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + phydev->link = 1; + } else { + phydev->link = 0; + } + +err: + return ret; +} + +static int cortina_soft_reset(struct phy_device *phydev) +{ + return 0; +} + +static int cortina_probe(struct phy_device *phydev) +{ + u32 phy_id = 0; + int id_lsb = 0, id_msb = 0; + + /* Read device id from phy registers. */ + id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB); + if (id_lsb < 0) + return -ENXIO; + + phy_id = id_lsb << 16; + + id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB); + if (id_msb < 0) + return -ENXIO; + + phy_id |= id_msb; + + /* Make sure the device tree binding matched the driver with the + * right device. + */ + if (phy_id != phydev->drv->phy_id) { + phydev_err(phydev, "Error matching phy with %s driver\n", + phydev->drv->name); + return -ENODEV; + } + + return 0; +} + +static struct phy_driver cortina_driver[] = { +{ + .phy_id = PHY_ID_CS4340, + .phy_id_mask = 0xffffffff, + .name = "Cortina CS4340", + .config_aneg = cortina_config_aneg, + .read_status = cortina_read_status, + .soft_reset = cortina_soft_reset, + .probe = cortina_probe, +}, +}; + +module_phy_driver(cortina_driver); + +static struct mdio_device_id __maybe_unused cortina_tbl[] = { + { PHY_ID_CS4340, 0xffffffff}, + {}, +}; + +MODULE_DEVICE_TABLE(mdio, cortina_tbl); |