diff options
-rw-r--r-- | arch/arm/mach-mxs/devices/platform-gpio-mxs.c | 24 | ||||
-rw-r--r-- | arch/arm/mach-mxs/include/mach/common.h | 4 | ||||
-rw-r--r-- | arch/arm/mach-mxs/mm.c | 10 | ||||
-rw-r--r-- | drivers/gpio/gpio-mxs.c | 74 |
4 files changed, 66 insertions, 46 deletions
diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c index ed0885e414e0..cd99f19ec637 100644 --- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c +++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c @@ -14,7 +14,7 @@ #include <mach/devices-common.h> struct platform_device *__init mxs_add_gpio( - int id, resource_size_t iobase, int irq) + char *name, int id, resource_size_t iobase, int irq) { struct resource res[] = { { @@ -29,25 +29,5 @@ struct platform_device *__init mxs_add_gpio( }; return platform_device_register_resndata(&mxs_apbh_bus, - "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); + name, id, res, ARRAY_SIZE(res), NULL, 0); } - -static int __init mxs_add_mxs_gpio(void) -{ - if (cpu_is_mx23()) { - mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); - mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); - mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); - } - - if (cpu_is_mx28()) { - mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); - mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); - mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); - mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); - mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); - } - - return 0; -} -postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 5f9a3583266c..de6c7ba42544 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -18,13 +18,11 @@ extern void mxs_restart(char, const char *); extern int mxs_saif_clkmux_select(unsigned int clkmux); extern void mx23_soc_init(void); -extern int mx23_register_gpios(void); extern int mx23_clocks_init(void); extern void mx23_map_io(void); extern void mx23_init_irq(void); extern void mx28_soc_init(void); -extern int mx28_register_gpios(void); extern int mx28_clocks_init(void); extern void mx28_map_io(void); extern void mx28_init_irq(void); @@ -33,5 +31,7 @@ extern void icoll_init_irq(void); extern struct platform_device *mxs_add_dma(const char *devid, resource_size_t base); +extern struct platform_device *mxs_add_gpio(char *name, int id, + resource_size_t iobase, int irq); #endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index 6af4371ec829..dccb67a9e7c4 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -69,6 +69,10 @@ void __init mx23_soc_init(void) mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR); mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR); + + mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); + mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); + mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); } void __init mx28_soc_init(void) @@ -77,4 +81,10 @@ void __init mx28_soc_init(void) mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR); mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR); + + mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); + mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); + mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); + mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); + mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); } diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index 95a11dba285c..38ae56f17916 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -29,19 +29,18 @@ #include <linux/slab.h> #include <linux/basic_mmio_gpio.h> #include <linux/module.h> -#include <mach/mxs.h> #define MXS_SET 0x4 #define MXS_CLR 0x8 -#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) -#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) -#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) -#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) -#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) -#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) -#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) -#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) +#define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10) +#define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10) +#define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10) +#define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10) +#define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10) +#define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10) +#define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10) +#define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10) #define GPIO_INT_FALL_EDGE 0x0 #define GPIO_INT_LOW_LEV 0x1 @@ -52,14 +51,30 @@ #define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START) +enum mxs_gpio_id { + IMX23_GPIO, + IMX28_GPIO, +}; + struct mxs_gpio_port { void __iomem *base; int id; int irq; int virtual_irq_start; struct bgpio_chip bgc; + enum mxs_gpio_id devid; }; +static inline int is_imx23_gpio(struct mxs_gpio_port *port) +{ + return port->devid == IMX23_GPIO; +} + +static inline int is_imx28_gpio(struct mxs_gpio_port *port) +{ + return port->devid == IMX28_GPIO; +} + /* Note: This driver assumes 32 GPIOs are handled in one register */ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) @@ -89,21 +104,21 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) } /* set level or edge */ - pin_addr = port->base + PINCTRL_IRQLEV(port->id); + pin_addr = port->base + PINCTRL_IRQLEV(port); if (edge & GPIO_INT_LEV_MASK) writel(pin_mask, pin_addr + MXS_SET); else writel(pin_mask, pin_addr + MXS_CLR); /* set polarity */ - pin_addr = port->base + PINCTRL_IRQPOL(port->id); + pin_addr = port->base + PINCTRL_IRQPOL(port); if (edge & GPIO_INT_POL_MASK) writel(pin_mask, pin_addr + MXS_SET); else writel(pin_mask, pin_addr + MXS_CLR); writel(1 << (gpio & 0x1f), - port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR); + port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); return 0; } @@ -117,8 +132,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) desc->irq_data.chip->irq_ack(&desc->irq_data); - irq_stat = readl(port->base + PINCTRL_IRQSTAT(port->id)) & - readl(port->base + PINCTRL_IRQEN(port->id)); + irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) & + readl(port->base + PINCTRL_IRQEN(port)); while (irq_stat != 0) { int irqoffset = fls(irq_stat) - 1; @@ -164,8 +179,8 @@ static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port) ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = mxs_gpio_set_irq_type; ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; - ct->regs.ack = PINCTRL_IRQSTAT(port->id) + MXS_CLR; - ct->regs.mask = PINCTRL_IRQEN(port->id); + ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; + ct->regs.mask = PINCTRL_IRQEN(port); irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } @@ -179,6 +194,19 @@ static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset) return port->virtual_irq_start + offset; } +static struct platform_device_id mxs_gpio_ids[] = { + { + .name = "imx23-gpio", + .driver_data = IMX23_GPIO, + }, { + .name = "imx28-gpio", + .driver_data = IMX28_GPIO, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxs_gpio_ids); + static int __devinit mxs_gpio_probe(struct platform_device *pdev) { static void __iomem *base; @@ -191,6 +219,7 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev) return -ENOMEM; port->id = pdev->id; + port->devid = pdev->id_entry->driver_data; port->virtual_irq_start = MXS_GPIO_IRQ_START + port->id * 32; port->irq = platform_get_irq(pdev, 0); @@ -213,11 +242,11 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev) * select the pin interrupt functionality but initially * disable the interrupts */ - writel(~0U, port->base + PINCTRL_PIN2IRQ(port->id)); - writel(0, port->base + PINCTRL_IRQEN(port->id)); + writel(~0U, port->base + PINCTRL_PIN2IRQ(port)); + writel(0, port->base + PINCTRL_IRQEN(port)); /* clear address has to be used to clear IRQSTAT bits */ - writel(~0U, port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR); + writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); /* gpio-mxs can be a generic irq chip */ mxs_gpio_init_gc(port); @@ -227,9 +256,9 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev) irq_set_handler_data(port->irq, port); err = bgpio_init(&port->bgc, &pdev->dev, 4, - port->base + PINCTRL_DIN(port->id), - port->base + PINCTRL_DOUT(port->id), NULL, - port->base + PINCTRL_DOE(port->id), NULL, false); + port->base + PINCTRL_DIN(port), + port->base + PINCTRL_DOUT(port), NULL, + port->base + PINCTRL_DOE(port), NULL, false); if (err) return err; @@ -251,6 +280,7 @@ static struct platform_driver mxs_gpio_driver = { .owner = THIS_MODULE, }, .probe = mxs_gpio_probe, + .id_table = mxs_gpio_ids, }; static int __init mxs_gpio_init(void) |