diff options
| -rw-r--r-- | arch/arm/mach-omap1/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 116 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/board-ams-delta.h | 1 | ||||
| -rw-r--r-- | drivers/input/serio/ams_delta_serio.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/ams-delta.c | 2 | ||||
| -rw-r--r-- | drivers/video/omap/lcd_ams_delta.c | 2 | ||||
| -rw-r--r-- | sound/soc/omap/ams-delta.c | 32 |
7 files changed, 101 insertions, 56 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 5b1edbae6893..4b6a774606cb 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -157,6 +157,8 @@ config MACH_AMS_DELTA select FIQ select GPIO_GENERIC_PLATFORM select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 87b13039f936..cb6afe670468 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -19,6 +19,9 @@ #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_8250.h> #include <linux/export.h> @@ -150,11 +153,11 @@ static struct map_desc ams_delta_io_desc[] __initdata = { } }; -static struct omap_lcd_config ams_delta_lcd_config = { +static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config __initdata = { +static struct omap_usb_config ams_delta_usb_config = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, @@ -167,7 +170,7 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = { #define LATCH1_GPIO_BASE 232 #define LATCH1_NGPIO 8 -static struct resource latch1_resources[] __initconst = { +static struct resource latch1_resources[] = { [0] = { .name = "dat", .start = LATCH1_PHYS, @@ -176,7 +179,7 @@ static struct resource latch1_resources[] __initconst = { }, }; -static struct bgpio_pdata latch1_pdata __initconst = { +static struct bgpio_pdata latch1_pdata = { .base = LATCH1_GPIO_BASE, .ngpio = LATCH1_NGPIO, }; @@ -191,7 +194,7 @@ static struct platform_device latch1_gpio_device = { }, }; -static struct resource latch2_resources[] __initconst = { +static struct resource latch2_resources[] = { [0] = { .name = "dat", .start = LATCH2_PHYS, @@ -200,7 +203,7 @@ static struct resource latch2_resources[] __initconst = { }, }; -static struct bgpio_pdata latch2_pdata __initconst = { +static struct bgpio_pdata latch2_pdata = { .base = AMS_DELTA_LATCH2_GPIO_BASE, .ngpio = AMS_DELTA_LATCH2_NGPIO, }; @@ -215,7 +218,7 @@ static struct platform_device latch2_gpio_device = { }, }; -static struct gpio latch_gpios[] __initconst = { +static const struct gpio latch_gpios[] __initconst = { { .gpio = LATCH1_GPIO_BASE + 6, .flags = GPIOF_OUT_INIT_LOW, @@ -237,11 +240,6 @@ static struct gpio latch_gpios[] __initconst = { .label = "scard_cmdvcc", }, { - .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, - .flags = GPIOF_OUT_INIT_LOW, - .label = "modem_nreset", - }, - { .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, .flags = GPIOF_OUT_INIT_LOW, .label = "modem_codec", @@ -258,6 +256,44 @@ static struct gpio latch_gpios[] __initconst = { }, }; +static struct regulator_consumer_supply modem_nreset_consumers[] = { + REGULATOR_SUPPLY("RESET#", "serial8250.1"), + REGULATOR_SUPPLY("POR", "cx20442-codec"), +}; + +static struct regulator_init_data modem_nreset_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), + .consumer_supplies = modem_nreset_consumers, +}; + +static struct fixed_voltage_config modem_nreset_config = { + .supply_name = "modem_nreset", + .microvolts = 3300000, + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .startup_delay = 25000, + .enable_high = 1, + .enabled_at_boot = 1, + .init_data = &modem_nreset_data, +}; + +static struct platform_device modem_nreset_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &modem_nreset_config, + }, +}; + +struct modem_private_data { + struct regulator *regulator; +}; + +static struct modem_private_data modem_priv; + void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) { int bit = 0; @@ -266,7 +302,8 @@ void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) for (; bit < ngpio; bit++, bitpos = bitpos << 1) { if (!(mask & bitpos)) continue; - gpio_set_value(base + bit, (value & bitpos) != 0); + else + gpio_set_value(base + bit, (value & bitpos) != 0); } } EXPORT_SYMBOL(ams_delta_latch_write); @@ -300,7 +337,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data __initdata = { +static struct omap_kp_platform_data ams_delta_kp_data = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, @@ -322,7 +359,7 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct gpio_led gpio_leds[] __initconst = { +static const struct gpio_led gpio_leds[] __initconst = { { .name = "camera", .gpio = LATCH1_GPIO_BASE + 0, @@ -358,7 +395,7 @@ static struct gpio_led gpio_leds[] __initconst = { }, }; -static struct gpio_led_platform_data leds_pdata __initconst = { +static const struct gpio_led_platform_data leds_pdata __initconst = { .leds = gpio_leds, .num_leds = ARRAY_SIZE(gpio_leds), }; @@ -415,7 +452,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_camera_device, }; -static struct platform_device *late_devices[] __initconst = { +static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, }; @@ -459,6 +496,22 @@ static void __init ams_delta_init(void) omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } +static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) +{ + struct modem_private_data *priv = port->private_data; + + if (IS_ERR(priv->regulator)) + return; + + if (state == old) + return; + + if (state == 0) + regulator_enable(priv->regulator); + else if (old == 0) + regulator_disable(priv->regulator); +} + static struct plat_serial8250_port ams_delta_modem_ports[] = { { .membase = IOMEM(MODEM_VIRT), @@ -469,6 +522,8 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = { .iotype = UPIO_MEM, .regshift = 1, .uartclk = BASE_BAUD * 16, + .pm = modem_pm, + .private_data = &modem_priv, }, { }, }; @@ -496,6 +551,12 @@ static int __init late_init(void) platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + err = platform_device_register(&modem_nreset_device); + if (err) { + pr_err("Couldn't register the modem regulator device\n"); + return err; + } + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -507,15 +568,30 @@ static int __init late_init(void) } gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); - ams_delta_latch2_write( - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); + /* Initialize the modem_nreset regulator consumer before use */ + modem_priv.regulator = ERR_PTR(-ENODEV); + + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + AMS_DELTA_LATCH2_MODEM_CODEC); err = platform_device_register(&ams_delta_modem_device); if (err) goto gpio_free; + + /* + * Once the modem device is registered, the modem_nreset + * regulator can be requested on behalf of that device. + */ + modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, + "RESET#"); + if (IS_ERR(modem_priv.regulator)) { + err = PTR_ERR(modem_priv.regulator); + goto unregister; + } return 0; +unregister: + platform_device_unregister(&ams_delta_modem_device); gpio_free: gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); return err; diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 027e79eead5e..ad6f865d1f16 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -30,7 +30,6 @@ #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 0571e2ec358b..bd5b10eeeb40 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -103,7 +103,7 @@ static void ams_delta_serio_close(struct serio *serio) gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); } -static struct gpio ams_delta_gpios[] __initconst_or_module = { +static const struct gpio ams_delta_gpios[] __initconst_or_module = { { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA, .flags = GPIOF_DIR_IN, diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 85934dc8546f..73416951f4c1 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -145,7 +145,7 @@ static int ams_delta_nand_ready(struct mtd_info *mtd) return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB); } -static struct gpio _mandatory_gpio[] __initconst_or_module = { +static const struct gpio _mandatory_gpio[] = { { .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE, .flags = GPIOF_OUT_INIT_HIGH, diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c index 0e71e2898b18..d3a311327227 100644 --- a/drivers/video/omap/lcd_ams_delta.c +++ b/drivers/video/omap/lcd_ams_delta.c @@ -99,7 +99,7 @@ static struct lcd_ops ams_delta_lcd_ops = { /* omapfb panel section */ -static struct gpio _gpios[] __initconst_or_module = { +static const struct gpio _gpios[] = { { .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, .flags = GPIOF_OUT_INIT_LOW, diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index da6e005c1c41..f610260065ba 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -426,29 +426,6 @@ static struct snd_soc_ops ams_delta_ops = { }; -/* Board specific codec bias level control */ -static int ams_delta_set_bias_level(struct snd_soc_card *card, - struct snd_soc_dapm_context *dapm, - enum snd_soc_bias_level level) -{ - switch (level) { - case SND_SOC_BIAS_ON: - case SND_SOC_BIAS_PREPARE: - case SND_SOC_BIAS_STANDBY: - if (card->dapm.bias_level == SND_SOC_BIAS_OFF) - ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET, - AMS_DELTA_LATCH2_MODEM_NRESET); - break; - case SND_SOC_BIAS_OFF: - if (card->dapm.bias_level != SND_SOC_BIAS_OFF) - ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_NRESET, - 0); - } - card->dapm.bias_level = level; - - return 0; -} - /* Digital mute implemented using modem/CPU multiplexer. * Shares hardware with codec config pulse generation */ static bool ams_delta_muted = 1; @@ -512,9 +489,6 @@ static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd) ams_delta_ops.shutdown = ams_delta_shutdown; } - /* Set codec bias level */ - ams_delta_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY); - /* Add hook switch - can be used to control the codec from userspace * even if line discipline fails */ ret = snd_soc_jack_new(rtd->codec, "hook_switch", @@ -598,7 +572,6 @@ static struct snd_soc_card ams_delta_audio_card = { .owner = THIS_MODULE, .dai_link = &ams_delta_dai_link, .num_links = 1, - .set_bias_level = ams_delta_set_bias_level, }; /* Module init/exit */ @@ -647,11 +620,6 @@ static void __exit ams_delta_module_exit(void) ARRAY_SIZE(ams_delta_hook_switch_gpios), ams_delta_hook_switch_gpios); - /* Keep modem power on */ - ams_delta_set_bias_level(&ams_delta_audio_card, - &ams_delta_audio_card.rtd[0].codec->dapm, - SND_SOC_BIAS_STANDBY); - platform_device_unregister(cx20442_platform_device); platform_device_unregister(ams_delta_audio_platform_device); } |