diff options
211 files changed, 11404 insertions, 3486 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index c702c78f24d8..08d456e07b53 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -189,6 +189,28 @@ Description: The file will read "hotplug", "wired" and "not used" if the information is available, and "unknown" otherwise. +What: /sys/bus/usb/devices/.../(hub interface)/portX/quirks +Date: May 2018 +Contact: Nicolas Boichat <drinkcat@chromium.org> +Description: + In some cases, we care about time-to-active for devices + connected on a specific port (e.g. non-standard USB port like + pogo pins), where the device to be connected is known in + advance, and behaves well according to the specification. + This attribute is a bit-field that controls the behavior of + a specific port: + - Bit 0 of this field selects the "old" enumeration scheme, + as it is considerably faster (it only causes one USB reset + instead of 2). + The old enumeration scheme can also be selected globally + using /sys/module/usbcore/parameters/old_scheme_first, but + it is often not desirable as the new scheme was introduced to + increase compatibility with more devices. + - Bit 1 reduces TRSTRCY to the 10 ms that are required by the + USB 2.0 specification, instead of the 50 ms that are normally + used to help make enumeration work better on some high speed + devices. + What: /sys/bus/usb/devices/.../(hub interface)/portX/over_current_count Date: February 2018 Contact: Richard Leitner <richard.leitner@skidata.com> @@ -236,3 +258,21 @@ Description: Supported values are 0 - 15. More information on how besl values map to microseconds can be found in USB 2.0 ECN Errata for Link Power Management, section 4.10) + +What: /sys/bus/usb/devices/.../rx_lanes +Date: March 2018 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + Number of rx lanes the device is using. + USB 3.2 adds Dual-lane support, 2 rx and 2 tx lanes over Type-C. + Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per + direction. Devices before USB 3.2 are single lane (rx_lanes = 1) + +What: /sys/bus/usb/devices/.../tx_lanes +Date: March 2018 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + Number of tx lanes the device is using. + USB 3.2 adds Dual-lane support, 2 rx and 2 tx -lanes over Type-C. + Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per + direction. Devices before USB 3.2 are single lane (tx_lanes = 1) diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index f85ce9e327b9..5e23e22dce1b 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -1,3 +1,458 @@ +===== General Properties ===== + +What: /sys/class/power_supply/<supply_name>/manufacturer +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the name of the device manufacturer. + + Access: Read + Valid values: Represented as string + +What: /sys/class/power_supply/<supply_name>/model_name +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the name of the device model. + + Access: Read + Valid values: Represented as string + +What: /sys/class/power_supply/<supply_name>/serial_number +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Reports the serial number of the device. + + Access: Read + Valid values: Represented as string + +What: /sys/class/power_supply/<supply_name>/type +Date: May 2010 +Contact: linux-pm@vger.kernel.org +Description: + Describes the main type of the supply. + + Access: Read + Valid values: "Battery", "UPS", "Mains", "USB" + +===== Battery Properties ===== + +What: /sys/class/power_supply/<supply_name>/capacity +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Fine grain representation of battery capacity. + Access: Read + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/capacity_alert_max +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Maximum battery capacity trip-wire value where the supply will + notify user-space of the event. This is normally used for the + battery discharging scenario where user-space needs to know the + battery has dropped to an upper level so it can take + appropriate action (e.g. warning user that battery level is + low). + + Access: Read, Write + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/capacity_alert_min +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Minimum battery capacity trip-wire value where the supply will + notify user-space of the event. This is normally used for the + battery discharging scenario where user-space needs to know the + battery has dropped to a lower level so it can take + appropriate action (e.g. warning user that battery level is + critically low). + + Access: Read, Write + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/capacity_level +Date: June 2009 +Contact: linux-pm@vger.kernel.org +Description: + Coarse representation of battery capacity. + + Access: Read + Valid values: "Unknown", "Critical", "Low", "Normal", "High", + "Full" + +What: /sys/class/power_supply/<supply_name>/current_avg +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports an average IBAT current reading for the battery, over a + fixed period. Normally devices will provide a fixed interval in + which they average readings to smooth out the reported value. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/current_max +Date: October 2010 +Contact: linux-pm@vger.kernel.org +Description: + Reports the maximum IBAT current allowed into the battery. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/current_now +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports an instant, single IBAT current reading for the battery. + This value is not averaged/smoothed. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/charge_type +Date: July 2009 +Contact: linux-pm@vger.kernel.org +Description: + Represents the type of charging currently being applied to the + battery. + + Access: Read + Valid values: "Unknown", "N/A", "Trickle", "Fast" + +What: /sys/class/power_supply/<supply_name>/charge_term_current +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Reports the charging current value which is used to determine + when the battery is considered full and charging should end. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/health +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the health of the battery or battery side of charger + functionality. + + Access: Read + Valid values: "Unknown", "Good", "Overheat", "Dead", + "Over voltage", "Unspecified failure", "Cold", + "Watchdog timer expire", "Safety timer expire" + +What: /sys/class/power_supply/<supply_name>/precharge_current +Date: June 2017 +Contact: linux-pm@vger.kernel.org +Description: + Reports the charging current applied during pre-charging phase + for a battery charge cycle. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/present +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports whether a battery is present or not in the system. + + Access: Read + Valid values: + 0: Absent + 1: Present + +What: /sys/class/power_supply/<supply_name>/status +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Represents the charging status of the battery. Normally this + is read-only reporting although for some supplies this can be + used to enable/disable charging to the battery. + + Access: Read, Write + Valid values: "Unknown", "Charging", "Discharging", + "Not charging", "Full" + +What: /sys/class/power_supply/<supply_name>/technology +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Describes the battery technology supported by the supply. + + Access: Read + Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", + "NiCd", "LiMn" + +What: /sys/class/power_supply/<supply_name>/temp +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the current TBAT battery temperature reading. + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_max +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Maximum TBAT temperature trip-wire value where the supply will + notify user-space of the event. This is normally used for the + battery charging scenario where user-space needs to know the + battery temperature has crossed an upper threshold so it can + take appropriate action (e.g. warning user that battery level is + critically high, and charging has stopped). + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_min +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Minimum TBAT temperature trip-wire value where the supply will + notify user-space of the event. This is normally used for the + battery charging scenario where user-space needs to know the + battery temperature has crossed a lower threshold so it can take + appropriate action (e.g. warning user that battery level is + high, and charging current has been reduced accordingly to + remedy the situation). + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_max +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Reports the maximum allowed TBAT battery temperature for + charging. + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_min +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Reports the minimum allowed TBAT battery temperature for + charging. + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/voltage_avg, +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports an average VBAT voltage reading for the battery, over a + fixed period. Normally devices will provide a fixed interval in + which they average readings to smooth out the reported value. + + Access: Read + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_max, +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Reports the maximum safe VBAT voltage permitted for the battery, + during charging. + + Access: Read + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_min, +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Reports the minimum safe VBAT voltage permitted for the battery, + during discharging. + + Access: Read + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_now, +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports an instant, single VBAT voltage reading for the battery. + This value is not averaged/smoothed. + + Access: Read + Valid values: Represented in microvolts + +===== USB Properties ===== + +What: /sys/class/power_supply/<supply_name>/current_avg +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports an average IBUS current reading over a fixed period. + Normally devices will provide a fixed interval in which they + average readings to smooth out the reported value. + + Access: Read + Valid values: Represented in microamps + + +What: /sys/class/power_supply/<supply_name>/current_max +Date: October 2010 +Contact: linux-pm@vger.kernel.org +Description: + Reports the maximum IBUS current the supply can support. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/current_now +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the IBUS current supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/input_current_limit +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Details the incoming IBUS current limit currently set in the + supply. Normally this is configured based on the type of + connection made (e.g. A configured SDP should output a maximum + of 500mA so the input current limit is set to the same value). + + Access: Read, Write + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/online, +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Indicates if VBUS is present for the supply. When the supply is + online, and the supply allows it, then it's possible to switch + between online states (e.g. Fixed -> Programmable for a PD_PPS + USB supply so voltage and current can be controlled). + + Access: Read, Write + Valid values: + 0: Offline + 1: Online Fixed - Fixed Voltage Supply + 2: Online Programmable - Programmable Voltage Supply + +What: /sys/class/power_supply/<supply_name>/temp +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the current supply temperature reading. This would + normally be the internal temperature of the device itself (e.g + TJUNC temperature of an IC) + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_max +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Maximum supply temperature trip-wire value where the supply will + notify user-space of the event. This is normally used for the + charging scenario where user-space needs to know the supply + temperature has crossed an upper threshold so it can take + appropriate action (e.g. warning user that the supply + temperature is critically high, and charging has stopped to + remedy the situation). + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_min +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Minimum supply temperature trip-wire value where the supply will + notify user-space of the event. This is normally used for the + charging scenario where user-space needs to know the supply + temperature has crossed a lower threshold so it can take + appropriate action (e.g. warning user that the supply + temperature is high, and charging current has been reduced + accordingly to remedy the situation). + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_max +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Reports the maximum allowed supply temperature for operation. + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_min +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Reports the mainimum allowed supply temperature for operation. + + Access: Read + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/usb_type +Date: March 2018 +Contact: linux-pm@vger.kernel.org +Description: + Reports what type of USB connection is currently active for + the supply, for example it can show if USB-PD capable source + is attached. + + Access: Read-Only + Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", + "PD_DRP", "PD_PPS", "BrickID" + +What: /sys/class/power_supply/<supply_name>/voltage_max +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Reports the maximum VBUS voltage the supply can support. + + Access: Read + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_min +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Reports the minimum VBUS voltage the supply can support. + + Access: Read + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_now +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the VBUS voltage supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + Valid values: Represented in microvolts + +===== Device Specific Properties ===== + What: /sys/class/power/ds2760-battery.*/charge_now Date: May 2010 KernelVersion: 2.6.35 diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt new file mode 100644 index 000000000000..e7caefa0b9c2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt @@ -0,0 +1,109 @@ +MediaTek XS-PHY binding +-------------------------- + +The XS-PHY controller supports physical layer functionality for USB3.1 +GEN2 controller on MediaTek SoCs. + +Required properties (controller (parent) node): + - compatible : should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy", + soc-model is the name of SoC, such as mt3611 etc; + when using "mediatek,xsphy" compatible string, you need SoC specific + ones in addition, one of: + - "mediatek,mt3611-xsphy" + + - #address-cells, #size-cells : should use the same values as the root node + - ranges: must be present + +Optional properties (controller (parent) node): + - reg : offset and length of register shared by multiple U3 ports, + exclude port's private register, if only U2 ports provided, + shouldn't use the property. + - mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate + calibrate + - mediatek,src-coef : u32, coefficient for slew rate calibrate, depends on + SoC process + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : must contain + "ref": 48M reference clock for HighSpeed analog phy; and 26M + reference clock for SuperSpeedPlus analog phy, sometimes is + 24M, 25M or 27M, depended on platform. +- #phy-cells : should be 1 + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + +The following optional properties are only for debug or HQA test +Optional properties (PHY_TYPE_USB2 port (child) node): +- mediatek,eye-src : u32, the value of slew rate calibrate +- mediatek,eye-vrt : u32, the selection of VRT reference voltage +- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage +- mediatek,efuse-intr : u32, the selection of Internal Resistor + +Optional properties (PHY_TYPE_USB3 port (child) node): +- mediatek,efuse-intr : u32, the selection of Internal Resistor +- mediatek,efuse-tx-imp : u32, the selection of TX Impedance +- mediatek,efuse-rx-imp : u32, the selection of RX Impedance + +Banks layout of xsphy +------------------------------------------------------------- +port offset bank +u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM +u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM +u2 port2 0x2000 MISC + ... +u31 common 0x3000 DIG_GLB + 0x3100 PHYA_GLB +u31 port0 0x3400 DIG_LN_TOP + 0x3500 DIG_LN_TX0 + 0x3600 DIG_LN_RX0 + 0x3700 DIG_LN_DAIF + 0x3800 PHYA_LN +u31 port1 0x3a00 DIG_LN_TOP + 0x3b00 DIG_LN_TX0 + 0x3c00 DIG_LN_RX0 + 0x3d00 DIG_LN_DAIF + 0x3e00 PHYA_LN + ... + +DIG_GLB & PHYA_GLB are shared by U31 ports. + +Example: + +u3phy: usb-phy@11c40000 { + compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; + reg = <0 0x11c43000 0 0x0200>; + mediatek,src-ref-clk-mhz = <26>; + mediatek,src-coef = <17>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + u2port0: usb-phy@11c40000 { + reg = <0 0x11c40000 0 0x0400>; + clocks = <&clk48m>; + clock-names = "ref"; + mediatek,eye-src = <4>; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11c43000 { + reg = <0 0x11c43400 0 0x0500>; + clocks = <&clk26m>; + clock-names = "ref"; + mediatek,efuse-intr = <28>; + #phy-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index dcf1b8f691d5..266a1bb8bb6e 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -9,7 +9,8 @@ Required properties: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, - "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy. + "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, + "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845. - reg: offset and length of register set for PHY's common serdes block. diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt index 42c97426836e..03025d97998b 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt @@ -6,7 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. Required properties: - compatible: compatible list, contains "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, - "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. + "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. - reg: offset and length of the PHY register set. - #phy-cells: must be 0. @@ -27,6 +27,27 @@ Optional properties: tuning parameter value for qusb2 phy. - qcom,tcsr-syscon: Phandle to TCSR syscon register region. + - qcom,imp-res-offset-value: It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + This property is applicable to only QUSB2 v2 PHY (sdm845). + - qcom,hstx-trim-value: It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + This property is applicable to only QUSB2 v2 PHY (sdm845). + Default value is 22.2mA for sdm845. + - qcom,preemphasis-level: It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + This property is applicable to only QUSB2 v2 PHY (sdm845). + Default value is 10% for sdm845. +- qcom,preemphasis-width: It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + This property is applicable to only QUSB2 v2 PHY (sdm845). + Default value is full-bit width for sdm845. Example: hsusb_phy: phy@7411000 { diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 0e03344e2e8b..2e9318151df7 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -76,6 +76,10 @@ Optional properties: needs to make sure it does not send more than 90% maximum_periodic_data_per_frame. The use case is multiple transactions, but less frame rate. +- mux-controls: The mux control for toggling host/device output of this + controller. It's expected that a mux state of 0 indicates device mode and a + mux state of 1 indicates host mode. +- mux-control-names: Shall be "usb_switch" if mux-controls is specified. i.mx specific properties - fsl,usbmisc: phandler of non-core register device, with one @@ -102,4 +106,6 @@ Example: rx-burst-size-dword = <0x10>; extcon = <0>, <&usb_id>; phy-clkgate-delay-us = <400>; + mux-controls = <&usb_switch>; + mux-control-names = "usb_switch"; }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 0dbd3083e7dd..7f13ebef06cb 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -7,6 +7,26 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. + - clock-names: should contain "ref", "bus_early", "suspend" + - clocks: list of phandle and clock specifier pairs corresponding to + entries in the clock-names property. + +Exception for clocks: + clocks are optional if the parent node (i.e. glue-layer) is compatible to + one of the following: + "amlogic,meson-axg-dwc3" + "amlogic,meson-gxl-dwc3" + "cavium,octeon-7130-usb-uctl" + "qcom,dwc3" + "samsung,exynos5250-dwusb3" + "samsung,exynos7-dwusb3" + "sprd,sc9860-dwc3" + "st,stih407-dwc3" + "ti,am437x-dwc3" + "ti,dwc3" + "ti,keystone-dwc3" + "rockchip,rk3399-dwc3" + "xlnx,zynqmp-dwc3" Optional properties: - usb-phy : array of phandle for the PHY device. The first element @@ -15,6 +35,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". + - resets: a single pair of phandle and reset specifier - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt index 472facfa5a71..6087dc7f209e 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt @@ -6,12 +6,6 @@ Required properties : - interrupts : Interrupt specifier Optional properties : -- fcs,max-sink-microvolt : Maximum voltage to negotiate when configured as sink -- fcs,max-sink-microamp : Maximum current to negotiate when configured as sink -- fcs,max-sink-microwatt : Maximum power to negotiate when configured as sink - If this is less then max-sink-microvolt * - max-sink-microamp then the configured current will - be clamped. - fcs,operating-sink-microwatt : Minimum amount of power accepted from a sink when negotiating diff --git a/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt new file mode 100644 index 000000000000..f4633496b122 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt @@ -0,0 +1,45 @@ +HiSilicon STB xHCI + +The device node for HiSilicon STB xHCI host controller + +Required properties: + - compatible: should be "hisilicon,hi3798cv200-xhci" + - reg: specifies physical base address and size of the registers + - interrupts : interrupt used by the controller + - clocks: a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names: must contain + "bus": for bus clock + "utmi": for utmi clock + "pipe": for pipe clock + "suspend": for suspend clock + - resets: a list of phandle and reset specifier pairs as listed in + reset-names property. + - reset-names: must contain + "soft": for soft reset + - phys: a list of phandle + phy specifier pairs + - phy-names: must contain at least one of following: + "inno": for inno phy + "combo": for combo phy + +Optional properties: + - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM + - usb3-lpm-capable: determines if platform is USB3 LPM capable + - imod-interval-ns: default interrupt moderation interval is 40000ns + +Example: + +xhci0: xchi@f98a0000 { + compatible = "hisilicon,hi3798cv200-xhci"; + reg = <0xf98a0000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_USB3_BUS_CLK>, + <&crg HISTB_USB3_UTMI_CLK>, + <&crg HISTB_USB3_PIPE_CLK>, + <&crg HISTB_USB3_SUSPEND_CLK>; + clock-names = "bus", "utmi", "pipe", "suspend"; + resets = <&crg 0xb0 12>; + reset-names = "soft"; + phys = <&usb2_phy1_port1 0>, <&combphy0 PHY_TYPE_USB3>; + phy-names = "inno", "combo"; +}; diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt index bc8a2fa5d2bf..95afdcf3c337 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt @@ -1,54 +1,95 @@ Qualcomm SuperSpeed DWC3 USB SoC controller Required properties: -- compatible: should contain "qcom,dwc3" +- compatible: Compatible list, contains + "qcom,dwc3" + "qcom,msm8996-dwc3" for msm8996 SOC. + "qcom,sdm845-dwc3" for sdm845 SOC. +- reg: Offset and length of register set for QSCRATCH wrapper +- power-domains: specifies a phandle to PM domain provider node - clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names -- clock-names: Should contain the following: +- clock-names: Should contain the following: "core" Master/Core clock, have to be >= 125 MHz for SS operation and >= 60MHz for HS operation + "mock_utmi" Mock utmi clock needed for ITP/SOF generation in + host mode. Its frequency should be 19.2MHz. + "sleep" Sleep clock, used for wakeup when USB3 core goes + into low power mode (U3). Optional clocks: - "iface" System bus AXI clock. Not present on all platforms - "sleep" Sleep clock, used when USB3 core goes into low - power mode (U3). + "iface" System bus AXI clock. + Not present on "qcom,msm8996-dwc3" compatible. + "cfg_noc" System Config NOC clock. + Not present on "qcom,msm8996-dwc3" compatible. +- assigned-clocks: Should be: + MOCK_UTMI_CLK + MASTER_CLK +- assigned-clock-rates: Should be: + 19.2Mhz (192000000) for MOCK_UTMI_CLK + >=125Mhz (125000000) for MASTER_CLK in SS mode + >=60Mhz (60000000) for MASTER_CLK in HS mode + +Optional properties: +- resets: Phandle to reset control that resets core and wrapper. +- interrupts: specifies interrupts from controller wrapper used + to wakeup from low power/susepnd state. Must contain + one or more entry for interrupt-names property +- interrupt-names: Must include the following entries: + - "hs_phy_irq": The interrupt that is asserted when a + wakeup event is received on USB2 bus + - "ss_phy_irq": The interrupt that is asserted when a + wakeup event is received on USB3 bus + - "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate + interrupts for any wakeup event on DM and DP lines +- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement. + Used when dwc3 operates without SSPHY and only + HS/FS/LS modes are supported. Required child node: A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY +Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY Example device nodes: hs_phy: phy@100f8800 { - compatible = "qcom,dwc3-hs-usb-phy"; - reg = <0x100f8800 0x30>; - clocks = <&gcc USB30_0_UTMI_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - + compatible = "qcom,qusb2-v2-phy"; + ... }; ss_phy: phy@100f8830 { - compatible = "qcom,dwc3-ss-usb-phy"; - reg = <0x100f8830 0x30>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "ref"; - #phy-cells = <0>; - + compatible = "qcom,qmp-v3-usb3-phy"; + ... }; - usb3_0: usb30@0 { + usb3_0: usb30@a6f8800 { compatible = "qcom,dwc3"; + reg = <0xa6f8800 0x400>; #address-cells = <1>; #size-cells = <1>; - clocks = <&gcc USB30_0_MASTER_CLK>; - clock-names = "core"; - ranges; + interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "core", "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + reset-names = "core_reset"; + power-domains = <&gcc USB30_PRIM_GDSC>; + qcom,select-utmi-as-pipe-clk; dwc3@10000000 { compatible = "snps,dwc3"; diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt new file mode 100644 index 000000000000..09e847e92e5e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt @@ -0,0 +1,17 @@ +Richtek RT1711H TypeC PD Controller. + +Required properties: + - compatible : Must be "richtek,rt1711h". + - reg : Must be 0x4e, it's slave address of RT1711H. + - interrupt-parent : the phandle for the interrupt controller that + provides interrupts for this device. + - interrupts : <a b> where a is the interrupt number and b represents an + encoding of the sense and level information for the interrupt. + +Example : +rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + interrupt-parent = <&gpio26>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Documentation/driver-api/usb/dwc3.rst b/Documentation/driver-api/usb/dwc3.rst index c3dc84a50ce5..8b36ff11cef9 100644 --- a/Documentation/driver-api/usb/dwc3.rst +++ b/Documentation/driver-api/usb/dwc3.rst @@ -674,9 +674,8 @@ operations, both of which can be traced. Format is:: __entry->flags & DWC3_EP_ENABLED ? 'E' : 'e', __entry->flags & DWC3_EP_STALL ? 'S' : 's', __entry->flags & DWC3_EP_WEDGE ? 'W' : 'w', - __entry->flags & DWC3_EP_BUSY ? 'B' : 'b', + __entry->flags & DWC3_EP_TRANSFER_STARTED ? 'B' : 'b', __entry->flags & DWC3_EP_PENDING_REQUEST ? 'P' : 'p', - __entry->flags & DWC3_EP_MISSED_ISOC ? 'M' : 'm', __entry->flags & DWC3_EP_END_TRANSFER_PENDING ? 'E' : 'e', __entry->direction ? '<' : '>' ) diff --git a/MAINTAINERS b/MAINTAINERS index df6889859b33..756cbfaad7f9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2331,6 +2331,14 @@ S: Maintained F: drivers/gpio/gpio-ath79.c F: Documentation/devicetree/bindings/gpio/gpio-ath79.txt +ATHEROS 71XX/9XXX USB PHY DRIVER +M: Alban Bedel <albeu@free.fr> +W: https://github.com/AlbanBedel/linux +T: git git://github.com/AlbanBedel/linux +S: Maintained +F: drivers/phy/qualcomm/phy-ath79-usb.c +F: Documentation/devicetree/bindings/phy/phy-ath79-usb.txt + ATHEROS ATH GENERIC UTILITIES M: Kalle Valo <kvalo@codeaurora.org> L: linux-wireless@vger.kernel.org @@ -11267,6 +11275,7 @@ M: Sebastian Reichel <sre@kernel.org> L: linux-pm@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git S: Maintained +F: Documentation/ABI/testing/sysfs-class-power F: Documentation/devicetree/bindings/power/supply/ F: include/linux/power_supply.h F: drivers/power/supply/ @@ -14692,6 +14701,7 @@ S: Maintained F: Documentation/usb/usbip_protocol.txt F: drivers/usb/usbip/ F: tools/usb/usbip/ +F: tools/testing/selftests/drivers/usb/usbip/ USB PEGASUS DRIVER M: Petko Manolov <petkan@nucleusys.com> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 8d21b9825d71..fce9f2ca0570 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -202,8 +202,7 @@ config I2C_CHT_WC Note this controller is hooked up to a TI bq24292i charger-IC, combined with a FUSB302 Type-C port-controller as such it is advised - to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m - (the fusb302 driver currently is in drivers/staging). + to also select CONFIG_TYPEC_FUSB302=m. config I2C_NFORCE2 tristate "Nvidia nForce2, nForce3 and nForce4" diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c index e153e8b64bb8..d5553c47014f 100644 --- a/drivers/nfc/pn533/usb.c +++ b/drivers/nfc/pn533/usb.c @@ -62,6 +62,9 @@ struct pn533_usb_phy { struct urb *out_urb; struct urb *in_urb; + struct urb *ack_urb; + u8 *ack_buffer; + struct pn533 *priv; }; @@ -150,13 +153,16 @@ static int pn533_usb_send_ack(struct pn533 *dev, gfp_t flags) struct pn533_usb_phy *phy = dev->phy; static const u8 ack[6] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00}; /* spec 7.1.1.3: Preamble, SoPC (2), ACK Code (2), Postamble */ - int rc; - phy->out_urb->transfer_buffer = (u8 *)ack; - phy->out_urb->transfer_buffer_length = sizeof(ack); - rc = usb_submit_urb(phy->out_urb, flags); + if (!phy->ack_buffer) { + phy->ack_buffer = kmemdup(ack, sizeof(ack), flags); + if (!phy->ack_buffer) + return -ENOMEM; + } - return rc; + phy->ack_urb->transfer_buffer = phy->ack_buffer; + phy->ack_urb->transfer_buffer_length = sizeof(ack); + return usb_submit_urb(phy->ack_urb, flags); } static int pn533_usb_send_frame(struct pn533 *dev, @@ -375,26 +381,31 @@ static int pn533_acr122_poweron_rdr(struct pn533_usb_phy *phy) /* Power on th reader (CCID cmd) */ u8 cmd[10] = {PN533_ACR122_PC_TO_RDR_ICCPOWERON, 0, 0, 0, 0, 0, 0, 3, 0, 0}; + char *buffer; + int transferred; int rc; void *cntx; struct pn533_acr122_poweron_rdr_arg arg; dev_dbg(&phy->udev->dev, "%s\n", __func__); + buffer = kmemdup(cmd, sizeof(cmd), GFP_KERNEL); + if (!buffer) + return -ENOMEM; + init_completion(&arg.done); cntx = phy->in_urb->context; /* backup context */ phy->in_urb->complete = pn533_acr122_poweron_rdr_resp; phy->in_urb->context = &arg; - phy->out_urb->transfer_buffer = cmd; - phy->out_urb->transfer_buffer_length = sizeof(cmd); - print_hex_dump_debug("ACR122 TX: ", DUMP_PREFIX_NONE, 16, 1, cmd, sizeof(cmd), false); - rc = usb_submit_urb(phy->out_urb, GFP_KERNEL); - if (rc) { + rc = usb_bulk_msg(phy->udev, phy->out_urb->pipe, buffer, sizeof(cmd), + &transferred, 0); + kfree(buffer); + if (rc || (transferred != sizeof(cmd))) { nfc_err(&phy->udev->dev, "Reader power on cmd error %d\n", rc); return rc; @@ -490,8 +501,9 @@ static int pn533_usb_probe(struct usb_interface *interface, phy->in_urb = usb_alloc_urb(0, GFP_KERNEL); phy->out_urb = usb_alloc_urb(0, GFP_KERNEL); + phy->ack_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!phy->in_urb || !phy->out_urb) + if (!phy->in_urb || !phy->out_urb || !phy->ack_urb) goto error; usb_fill_bulk_urb(phy->in_urb, phy->udev, @@ -501,7 +513,9 @@ static int pn533_usb_probe(struct usb_interface *interface, usb_fill_bulk_urb(phy->out_urb, phy->udev, usb_sndbulkpipe(phy->udev, out_endpoint), NULL, 0, pn533_send_complete, phy); - + usb_fill_bulk_urb(phy->ack_urb, phy->udev, + usb_sndbulkpipe(phy->udev, out_endpoint), + NULL, 0, pn533_send_complete, phy); switch (id->driver_info) { case PN533_DEVICE_STD: @@ -554,6 +568,7 @@ static int pn533_usb_probe(struct usb_interface *interface, error: usb_free_urb(phy->in_urb); usb_free_urb(phy->out_urb); + usb_free_urb(phy->ack_urb); usb_put_dev(phy->udev); kfree(in_buf); @@ -573,10 +588,13 @@ static void pn533_usb_disconnect(struct usb_interface *interface) usb_kill_urb(phy->in_urb); usb_kill_urb(phy->out_urb); + usb_kill_urb(phy->ack_urb); kfree(phy->in_urb->transfer_buffer); usb_free_urb(phy->in_urb); usb_free_urb(phy->out_urb); + usb_free_urb(phy->ack_urb); + kfree(phy->ack_buffer); nfc_info(&interface->dev, "NXP PN533 NFC device disconnected\n"); } diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig index 88ab4e25e34f..8857d00b3c65 100644 --- a/drivers/phy/mediatek/Kconfig +++ b/drivers/phy/mediatek/Kconfig @@ -12,3 +12,12 @@ config PHY_MTK_TPHY different banks layout, the T-PHY with shared banks between multi-ports is first version, otherwise is second veriosn, so you can easily distinguish them by banks layout. + +config PHY_MTK_XSPHY + tristate "MediaTek XS-PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help + Enable this to support the SuperSpeedPlus XS-PHY transceiver for + USB3.1 GEN2 controllers on MediaTek chips. The driver supports + multiple USB2.0, USB3.1 GEN2 ports. diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile index 763a92eefa00..e5074b607d3d 100644 --- a/drivers/phy/mediatek/Makefile +++ b/drivers/phy/mediatek/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o +obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c new file mode 100644 index 000000000000..020cd0227397 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-xsphy.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MediaTek USB3.1 gen2 xsphy Driver + * + * Copyright (c) 2018 MediaTek Inc. + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* u2 phy banks */ +#define SSUSB_SIFSLV_MISC 0x000 +#define SSUSB_SIFSLV_U2FREQ 0x100 +#define SSUSB_SIFSLV_U2PHY_COM 0x300 + +/* u3 phy shared banks */ +#define SSPXTP_SIFSLV_DIG_GLB 0x000 +#define SSPXTP_SIFSLV_PHYA_GLB 0x100 + +/* u3 phy banks */ +#define SSPXTP_SIFSLV_DIG_LN_TOP 0x000 +#define SSPXTP_SIFSLV_DIG_LN_TX0 0x100 +#define SSPXTP_SIFSLV_DIG_LN_RX0 0x200 +#define SSPXTP_SIFSLV_DIG_LN_DAIF 0x300 +#define SSPXTP_SIFSLV_PHYA_LN 0x400 + +#define XSP_U2FREQ_FMCR0 ((SSUSB_SIFSLV_U2FREQ) + 0x00) +#define P2F_RG_FREQDET_EN BIT(24) +#define P2F_RG_CYCLECNT GENMASK(23, 0) +#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x)) + +#define XSP_U2FREQ_MMONR0 ((SSUSB_SIFSLV_U2FREQ) + 0x0c) + +#define XSP_U2FREQ_FMMONR1 ((SSUSB_SIFSLV_U2FREQ) + 0x10) +#define P2F_RG_FRCK_EN BIT(8) +#define P2F_USB_FM_VALID BIT(0) + +#define XSP_USBPHYACR0 ((SSUSB_SIFSLV_U2PHY_COM) + 0x00) +#define P2A0_RG_INTR_EN BIT(5) + +#define XSP_USBPHYACR1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x04) +#define P2A1_RG_INTR_CAL GENMASK(23, 19) +#define P2A1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19) +#define P2A1_RG_VRT_SEL GENMASK(14, 12) +#define P2A1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12) +#define P2A1_RG_TERM_SEL GENMASK(10, 8) +#define P2A1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8) + +#define XSP_USBPHYACR5 ((SSUSB_SIFSLV_U2PHY_COM) + 0x014) +#define P2A5_RG_HSTX_SRCAL_EN BIT(15) +#define P2A5_RG_HSTX_SRCTRL GENMASK(14, 12) +#define P2A5_RG_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) + +#define XSP_USBPHYACR6 ((SSUSB_SIFSLV_U2PHY_COM) + 0x018) +#define P2A6_RG_BC11_SW_EN BIT(23) +#define P2A6_RG_OTG_VBUSCMP_EN BIT(20) + +#define XSP_U2PHYDTM1 ((SSUSB_SIFSLV_U2PHY_COM) + 0x06C) +#define P2D_FORCE_IDDIG BIT(9) +#define P2D_RG_VBUSVALID BIT(5) +#define P2D_RG_SESSEND BIT(4) +#define P2D_RG_AVALID BIT(2) +#define P2D_RG_IDDIG BIT(1) + +#define SSPXTP_PHYA_GLB_00 ((SSPXTP_SIFSLV_PHYA_GLB) + 0x00) +#define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(21, 16) +#define RG_XTP_GLB_BIAS_INTR_CTRL_VAL(x) ((0x3f & (x)) << 16) + +#define SSPXTP_PHYA_LN_04 ((SSPXTP_SIFSLV_PHYA_LN) + 0x04) +#define RG_XTP_LN0_TX_IMPSEL GENMASK(4, 0) +#define RG_XTP_LN0_TX_IMPSEL_VAL(x) (0x1f & (x)) + +#define SSPXTP_PHYA_LN_14 ((SSPXTP_SIFSLV_PHYA_LN) + 0x014) +#define RG_XTP_LN0_RX_IMPSEL GENMASK(4, 0) +#define RG_XTP_LN0_RX_IMPSEL_VAL(x) (0x1f & (x)) + +#define XSP_REF_CLK 26 /* MHZ */ +#define XSP_SLEW_RATE_COEF 17 +#define XSP_SR_COEF_DIVISOR 1000 +#define XSP_FM_DET_CYCLE_CNT 1024 + +struct xsphy_instance { + struct phy *phy; + void __iomem *port_base; + struct clk *ref_clk; /* reference clock of anolog phy */ + u32 index; + u32 type; + /* only for HQA test */ + int efuse_intr; + int efuse_tx_imp; + int efuse_rx_imp; + /* u2 eye diagram */ + int eye_src; + int eye_vrt; + int eye_term; +}; + +struct mtk_xsphy { + struct device *dev; + void __iomem *glb_base; /* only shared u3 sif */ + struct xsphy_instance **phys; + int nphys; + int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ + int src_coef; /* coefficient for slew rate calibrate */ +}; + +static void u2_phy_slew_rate_calibrate(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + int calib_val; + int fm_out; + u32 tmp; + + /* use force value */ + if (inst->eye_src) + return; + + /* enable USB ring oscillator */ + tmp = readl(pbase + XSP_USBPHYACR5); + tmp |= P2A5_RG_HSTX_SRCAL_EN; + writel(tmp, pbase + XSP_USBPHYACR5); + udelay(1); /* wait clock stable */ + + /* enable free run clock */ + tmp = readl(pbase + XSP_U2FREQ_FMMONR1); + tmp |= P2F_RG_FRCK_EN; + writel(tmp, pbase + XSP_U2FREQ_FMMONR1); + + /* set cycle count as 1024 */ + tmp = readl(pbase + XSP_U2FREQ_FMCR0); + tmp &= ~(P2F_RG_CYCLECNT); + tmp |= P2F_RG_CYCLECNT_VAL(XSP_FM_DET_CYCLE_CNT); + writel(tmp, pbase + XSP_U2FREQ_FMCR0); + + /* enable frequency meter */ + tmp = readl(pbase + XSP_U2FREQ_FMCR0); + tmp |= P2F_RG_FREQDET_EN; + writel(tmp, pbase + XSP_U2FREQ_FMCR0); + + /* ignore return value */ + readl_poll_timeout(pbase + XSP_U2FREQ_FMMONR1, tmp, + (tmp & P2F_USB_FM_VALID), 10, 200); + + fm_out = readl(pbase + XSP_U2FREQ_MMONR0); + + /* disable frequency meter */ + tmp = readl(pbase + XSP_U2FREQ_FMCR0); + tmp &= ~P2F_RG_FREQDET_EN; + writel(tmp, pbase + XSP_U2FREQ_FMCR0); + + /* disable free run clock */ + tmp = readl(pbase + XSP_U2FREQ_FMMONR1); + tmp &= ~P2F_RG_FRCK_EN; + writel(tmp, pbase + XSP_U2FREQ_FMMONR1); + + if (fm_out) { + /* (1024 / FM_OUT) x reference clock frequency x coefficient */ + tmp = xsphy->src_ref_clk * xsphy->src_coef; + tmp = (tmp * XSP_FM_DET_CYCLE_CNT) / fm_out; + calib_val = DIV_ROUND_CLOSEST(tmp, XSP_SR_COEF_DIVISOR); + } else { + /* if FM detection fail, set default value */ + calib_val = 3; + } + dev_dbg(xsphy->dev, "phy.%d, fm_out:%d, calib:%d (clk:%d, coef:%d)\n", + inst->index, fm_out, calib_val, + xsphy->src_ref_clk, xsphy->src_coef); + + /* set HS slew rate */ + tmp = readl(pbase + XSP_USBPHYACR5); + tmp &= ~P2A5_RG_HSTX_SRCTRL; + tmp |= P2A5_RG_HSTX_SRCTRL_VAL(calib_val); + writel(tmp, pbase + XSP_USBPHYACR5); + + /* disable USB ring oscillator */ + tmp = readl(pbase + XSP_USBPHYACR5); + tmp &= ~P2A5_RG_HSTX_SRCAL_EN; + writel(tmp, pbase + XSP_USBPHYACR5); +} + +static void u2_phy_instance_init(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 tmp; + + /* DP/DM BC1.1 path Disable */ + tmp = readl(pbase + XSP_USBPHYACR6); + tmp &= ~P2A6_RG_BC11_SW_EN; + writel(tmp, pbase + XSP_USBPHYACR6); + + tmp = readl(pbase + XSP_USBPHYACR0); + tmp |= P2A0_RG_INTR_EN; + writel(tmp, pbase + XSP_USBPHYACR0); +} + +static void u2_phy_instance_power_on(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 index = inst->index; + u32 tmp; + + tmp = readl(pbase + XSP_USBPHYACR6); + tmp |= P2A6_RG_OTG_VBUSCMP_EN; + writel(tmp, pbase + XSP_USBPHYACR6); + + tmp = readl(pbase + XSP_U2PHYDTM1); + tmp |= P2D_RG_VBUSVALID | P2D_RG_AVALID; + tmp &= ~P2D_RG_SESSEND; + writel(tmp, pbase + XSP_U2PHYDTM1); + + dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); +} + +static void u2_phy_instance_power_off(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 index = inst->index; + u32 tmp; + + tmp = readl(pbase + XSP_USBPHYACR6); + tmp &= ~P2A6_RG_OTG_VBUSCMP_EN; + writel(tmp, pbase + XSP_USBPHYACR6); + + tmp = readl(pbase + XSP_U2PHYDTM1); + tmp &= ~(P2D_RG_VBUSVALID | P2D_RG_AVALID); + tmp |= P2D_RG_SESSEND; + writel(tmp, pbase + XSP_U2PHYDTM1); + + dev_dbg(xsphy->dev, "%s(%d)\n", __func__, index); +} + +static void u2_phy_instance_set_mode(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst, + enum phy_mode mode) +{ + u32 tmp; + + tmp = readl(inst->port_base + XSP_U2PHYDTM1); + switch (mode) { + case PHY_MODE_USB_DEVICE: + tmp |= P2D_FORCE_IDDIG | P2D_RG_IDDIG; + break; + case PHY_MODE_USB_HOST: + tmp |= P2D_FORCE_IDDIG; + tmp &= ~P2D_RG_IDDIG; + break; + case PHY_MODE_USB_OTG: + tmp &= ~(P2D_FORCE_IDDIG | P2D_RG_IDDIG); + break; + default: + return; + } + writel(tmp, inst->port_base + XSP_U2PHYDTM1); +} + +static void phy_parse_property(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + struct device *dev = &inst->phy->dev; + + switch (inst->type) { + case PHY_TYPE_USB2: + device_property_read_u32(dev, "mediatek,efuse-intr", + &inst->efuse_intr); + device_property_read_u32(dev, "mediatek,eye-src", + &inst->eye_src); + device_property_read_u32(dev, "mediatek,eye-vrt", + &inst->eye_vrt); + device_property_read_u32(dev, "mediatek,eye-term", + &inst->eye_term); + dev_dbg(dev, "intr:%d, src:%d, vrt:%d, term:%d\n", + inst->efuse_intr, inst->eye_src, + inst->eye_vrt, inst->eye_term); + break; + case PHY_TYPE_USB3: + device_property_read_u32(dev, "mediatek,efuse-intr", + &inst->efuse_intr); + device_property_read_u32(dev, "mediatek,efuse-tx-imp", + &inst->efuse_tx_imp); + device_property_read_u32(dev, "mediatek,efuse-rx-imp", + &inst->efuse_rx_imp); + dev_dbg(dev, "intr:%d, tx-imp:%d, rx-imp:%d\n", + inst->efuse_intr, inst->efuse_tx_imp, + inst->efuse_rx_imp); + break; + default: + dev_err(xsphy->dev, "incompatible phy type\n"); + return; + } +} + +static void u2_phy_props_set(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 tmp; + + if (inst->efuse_intr) { + tmp = readl(pbase + XSP_USBPHYACR1); + tmp &= ~P2A1_RG_INTR_CAL; + tmp |= P2A1_RG_INTR_CAL_VAL(inst->efuse_intr); + writel(tmp, pbase + XSP_USBPHYACR1); + } + + if (inst->eye_src) { + tmp = readl(pbase + XSP_USBPHYACR5); + tmp &= ~P2A5_RG_HSTX_SRCTRL; + tmp |= P2A5_RG_HSTX_SRCTRL_VAL(inst->eye_src); + writel(tmp, pbase + XSP_USBPHYACR5); + } + + if (inst->eye_vrt) { + tmp = readl(pbase + XSP_USBPHYACR1); + tmp &= ~P2A1_RG_VRT_SEL; + tmp |= P2A1_RG_VRT_SEL_VAL(inst->eye_vrt); + writel(tmp, pbase + XSP_USBPHYACR1); + } + + if (inst->eye_term) { + tmp = readl(pbase + XSP_USBPHYACR1); + tmp &= ~P2A1_RG_TERM_SEL; + tmp |= P2A1_RG_TERM_SEL_VAL(inst->eye_term); + writel(tmp, pbase + XSP_USBPHYACR1); + } +} + +static void u3_phy_props_set(struct mtk_xsphy *xsphy, + struct xsphy_instance *inst) +{ + void __iomem *pbase = inst->port_base; + u32 tmp; + + if (inst->efuse_intr) { + tmp = readl(xsphy->glb_base + SSPXTP_PHYA_GLB_00); + tmp &= ~RG_XTP_GLB_BIAS_INTR_CTRL; + tmp |= RG_XTP_GLB_BIAS_INTR_CTRL_VAL(inst->efuse_intr); + writel(tmp, xsphy->glb_base + SSPXTP_PHYA_GLB_00); + } + + if (inst->efuse_tx_imp) { + tmp = readl(pbase + SSPXTP_PHYA_LN_04); + tmp &= ~RG_XTP_LN0_TX_IMPSEL; + tmp |= RG_XTP_LN0_TX_IMPSEL_VAL(inst->efuse_tx_imp); + writel(tmp, pbase + SSPXTP_PHYA_LN_04); + } + + if (inst->efuse_rx_imp) { + tmp = readl(pbase + SSPXTP_PHYA_LN_14); + tmp &= ~RG_XTP_LN0_RX_IMPSEL; + tmp |= RG_XTP_LN0_RX_IMPSEL_VAL(inst->efuse_rx_imp); + writel(tmp, pbase + SSPXTP_PHYA_LN_14); + } +} + +static int mtk_phy_init(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + int ret; + + ret = clk_prepare_enable(inst->ref_clk); + if (ret) { + dev_err(xsphy->dev, "failed to enable ref_clk\n"); + return ret; + } + + switch (inst->type) { + case PHY_TYPE_USB2: + u2_phy_instance_init(xsphy, inst); + u2_phy_props_set(xsphy, inst); + break; + case PHY_TYPE_USB3: + u3_phy_props_set(xsphy, inst); + break; + default: + dev_err(xsphy->dev, "incompatible phy type\n"); + clk_disable_unprepare(inst->ref_clk); + return -EINVAL; + } + + return 0; +} + +static int mtk_phy_power_on(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + + if (inst->type == PHY_TYPE_USB2) { + u2_phy_instance_power_on(xsphy, inst); + u2_phy_slew_rate_calibrate(xsphy, inst); + } + + return 0; +} + +static int mtk_phy_power_off(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + + if (inst->type == PHY_TYPE_USB2) + u2_phy_instance_power_off(xsphy, inst); + + return 0; +} + +static int mtk_phy_exit(struct phy *phy) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + + clk_disable_unprepare(inst->ref_clk); + return 0; +} + +static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct xsphy_instance *inst = phy_get_drvdata(phy); + struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent); + + if (inst->type == PHY_TYPE_USB2) + u2_phy_instance_set_mode(xsphy, inst, mode); + + return 0; +} + +static struct phy *mtk_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct mtk_xsphy *xsphy = dev_get_drvdata(dev); + struct xsphy_instance *inst = NULL; + struct device_node *phy_np = args->np; + int index; + + if (args->args_count != 1) { + dev_err(dev, "invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < xsphy->nphys; index++) + if (phy_np == xsphy->phys[index]->phy->dev.of_node) { + inst = xsphy->phys[index]; + break; + } + + if (!inst) { + dev_err(dev, "failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + inst->type = args->args[0]; + if (!(inst->type == PHY_TYPE_USB2 || + inst->type == PHY_TYPE_USB3)) { + dev_err(dev, "unsupported phy type: %d\n", inst->type); + return ERR_PTR(-EINVAL); + } + + phy_parse_property(xsphy, inst); + + return inst->phy; +} + +static const struct phy_ops mtk_xsphy_ops = { + .init = mtk_phy_init, + .exit = mtk_phy_exit, + .power_on = mtk_phy_power_on, + .power_off = mtk_phy_power_off, + .set_mode = mtk_phy_set_mode, + .owner = THIS_MODULE, +}; + +static const struct of_device_id mtk_xsphy_id_table[] = { + { .compatible = "mediatek,xsphy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mtk_xsphy_id_table); + +static int mtk_xsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct resource *glb_res; + struct mtk_xsphy *xsphy; + struct resource res; + int port, retval; + + xsphy = devm_kzalloc(dev, sizeof(*xsphy), GFP_KERNEL); + if (!xsphy) + return -ENOMEM; + + xsphy->nphys = of_get_child_count(np); + xsphy->phys = devm_kcalloc(dev, xsphy->nphys, + sizeof(*xsphy->phys), GFP_KERNEL); + if (!xsphy->phys) + return -ENOMEM; + + xsphy->dev = dev; + platform_set_drvdata(pdev, xsphy); + + glb_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + /* optional, may not exist if no u3 phys */ + if (glb_res) { + /* get banks shared by multiple u3 phys */ + xsphy->glb_base = devm_ioremap_resource(dev, glb_res); + if (IS_ERR(xsphy->glb_base)) { + dev_err(dev, "failed to remap glb regs\n"); + return PTR_ERR(xsphy->glb_base); + } + } + + xsphy->src_ref_clk = XSP_REF_CLK; + xsphy->src_coef = XSP_SLEW_RATE_COEF; + /* update parameters of slew rate calibrate if exist */ + device_property_read_u32(dev, "mediatek,src-ref-clk-mhz", + &xsphy->src_ref_clk); + device_property_read_u32(dev, "mediatek,src-coef", &xsphy->src_coef); + + port = 0; + for_each_child_of_node(np, child_np) { + struct xsphy_instance *inst; + struct phy *phy; + + inst = devm_kzalloc(dev, sizeof(*inst), GFP_KERNEL); + if (!inst) { + retval = -ENOMEM; + goto put_child; + } + + xsphy->phys[port] = inst; + + phy = devm_phy_create(dev, child_np, &mtk_xsphy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + retval = PTR_ERR(phy); + goto put_child; + } + + retval = of_address_to_resource(child_np, 0, &res); + if (retval) { + dev_err(dev, "failed to get address resource(id-%d)\n", + port); + goto put_child; + } + + inst->port_base = devm_ioremap_resource(&phy->dev, &res); + if (IS_ERR(inst->port_base)) { + dev_err(dev, "failed to remap phy regs\n"); + retval = PTR_ERR(inst->port_base); + goto put_child; + } + + inst->phy = phy; + inst->index = port; + phy_set_drvdata(phy, inst); + port++; + + inst->ref_clk = devm_clk_get(&phy->dev, "ref"); + if (IS_ERR(inst->ref_clk)) { + dev_err(dev, "failed to get ref_clk(id-%d)\n", port); + retval = PTR_ERR(inst->ref_clk); + goto put_child; + } + } + + provider = devm_of_phy_provider_register(dev, mtk_phy_xlate); + return PTR_ERR_OR_ZERO(provider); + +put_child: + of_node_put(child_np); + return retval; +} + +static struct platform_driver mtk_xsphy_driver = { + .probe = mtk_xsphy_probe, + .driver = { + .name = "mtk-xsphy", + .of_match_table = mtk_xsphy_id_table, + }, +}; + +module_platform_driver(mtk_xsphy_driver); + +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); +MODULE_DESCRIPTION("MediaTek USB XS-PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 5439dd90d0dd..23705e1a0023 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -19,6 +19,8 @@ #define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */ #define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */ +#define MDM6600_MODEM_IDLE_DELAY_MS 1000 /* modem after USB suspend */ +#define MDM6600_MODEM_WAKE_DELAY_MS 200 /* modem response after idle */ enum phy_mdm6600_ctrl_lines { PHY_MDM6600_ENABLE, /* USB PHY enable */ @@ -93,9 +95,11 @@ struct phy_mdm6600 { struct gpio_descs *cmd_gpios; struct delayed_work bootup_work; struct delayed_work status_work; + struct delayed_work modem_wake_work; struct completion ack; bool enabled; /* mdm6600 phy enabled */ bool running; /* mdm6600 boot done */ + bool awake; /* mdm6600 respnds on n_gsm */ int status; }; @@ -446,6 +450,62 @@ static void phy_mdm6600_deferred_power_on(struct work_struct *work) dev_err(ddata->dev, "Device not functional\n"); } +/* + * USB suspend puts mdm6600 into low power mode. For any n_gsm using apps, + * we need to keep the modem awake by kicking it's mode0 GPIO. This will + * keep the modem awake for about 1.2 seconds. When no n_gsm apps are using + * the modem, runtime PM auto mode can be enabled so modem can enter low + * power mode. + */ +static void phy_mdm6600_wake_modem(struct phy_mdm6600 *ddata) +{ + struct gpio_desc *mode_gpio0; + + mode_gpio0 = ddata->mode_gpios->desc[PHY_MDM6600_MODE0]; + gpiod_set_value_cansleep(mode_gpio0, 1); + usleep_range(5, 15); + gpiod_set_value_cansleep(mode_gpio0, 0); + if (ddata->awake) + usleep_range(5, 15); + else + msleep(MDM6600_MODEM_WAKE_DELAY_MS); +} + +static void phy_mdm6600_modem_wake(struct work_struct *work) +{ + struct phy_mdm6600 *ddata; + + ddata = container_of(work, struct phy_mdm6600, modem_wake_work.work); + phy_mdm6600_wake_modem(ddata); + schedule_delayed_work(&ddata->modem_wake_work, + msecs_to_jiffies(MDM6600_MODEM_IDLE_DELAY_MS)); +} + +static int __maybe_unused phy_mdm6600_runtime_suspend(struct device *dev) +{ + struct phy_mdm6600 *ddata = dev_get_drvdata(dev); + + cancel_delayed_work_sync(&ddata->modem_wake_work); + ddata->awake = false; + + return 0; +} + +static int __maybe_unused phy_mdm6600_runtime_resume(struct device *dev) +{ + struct phy_mdm6600 *ddata = dev_get_drvdata(dev); + + phy_mdm6600_modem_wake(&ddata->modem_wake_work.work); + ddata->awake = true; + + return 0; +} + +static const struct dev_pm_ops phy_mdm6600_pm_ops = { + SET_RUNTIME_PM_OPS(phy_mdm6600_runtime_suspend, + phy_mdm6600_runtime_resume, NULL) +}; + static const struct of_device_id phy_mdm6600_id_table[] = { { .compatible = "motorola,mapphone-mdm6600", }, {}, @@ -464,6 +524,7 @@ static int phy_mdm6600_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&ddata->bootup_work, phy_mdm6600_deferred_power_on); INIT_DELAYED_WORK(&ddata->status_work, phy_mdm6600_status); + INIT_DELAYED_WORK(&ddata->modem_wake_work, phy_mdm6600_modem_wake); init_completion(&ddata->ack); ddata->dev = &pdev->dev; @@ -500,6 +561,24 @@ static int phy_mdm6600_probe(struct platform_device *pdev) */ msleep(PHY_MDM6600_PHY_DELAY_MS + 500); + /* + * Enable PM runtime only after PHY has been powered up properly. + * It is currently only needed after USB suspends mdm6600 and n_gsm + * needs to access the device. We don't want to do this earlier as + * gpio mode0 pin doubles as mdm6600 wake-up gpio. + */ + pm_runtime_use_autosuspend(ddata->dev); + pm_runtime_set_autosuspend_delay(ddata->dev, + MDM6600_MODEM_IDLE_DELAY_MS); + pm_runtime_enable(ddata->dev); + error = pm_runtime_get_sync(ddata->dev); + if (error < 0) { + dev_warn(ddata->dev, "failed to wake modem: %i\n", error); + pm_runtime_put_noidle(ddata->dev); + } + pm_runtime_mark_last_busy(ddata->dev); + pm_runtime_put_autosuspend(ddata->dev); + return 0; cleanup: @@ -512,6 +591,10 @@ static int phy_mdm6600_remove(struct platform_device *pdev) struct phy_mdm6600 *ddata = platform_get_drvdata(pdev); struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET]; + pm_runtime_dont_use_autosuspend(ddata->dev); + pm_runtime_put_sync(ddata->dev); + pm_runtime_disable(ddata->dev); + if (!ddata->running) wait_for_completion_timeout(&ddata->ack, msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS)); @@ -519,6 +602,7 @@ static int phy_mdm6600_remove(struct platform_device *pdev) gpiod_set_value_cansleep(reset_gpio, 1); phy_mdm6600_device_power_off(ddata); + cancel_delayed_work_sync(&ddata->modem_wake_work); cancel_delayed_work_sync(&ddata->bootup_work); cancel_delayed_work_sync(&ddata->status_work); @@ -530,6 +614,7 @@ static struct platform_driver phy_mdm6600_driver = { .remove = phy_mdm6600_remove, .driver = { .name = "phy-mapphone-mdm6600", + .pm = &phy_mdm6600_pm_ops, .of_match_table = of_match_ptr(phy_mdm6600_id_table), }, }; diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 09ac8afb97ac..35fd38c5a4a1 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -153,6 +153,9 @@ int phy_pm_runtime_get(struct phy *phy) { int ret; + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -168,6 +171,9 @@ int phy_pm_runtime_get_sync(struct phy *phy) { int ret; + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -181,6 +187,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_get_sync); int phy_pm_runtime_put(struct phy *phy) { + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -190,6 +199,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_put); int phy_pm_runtime_put_sync(struct phy *phy) { + if (!phy) + return 0; + if (!pm_runtime_enabled(&phy->dev)) return -ENOTSUPP; @@ -199,6 +211,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_put_sync); void phy_pm_runtime_allow(struct phy *phy) { + if (!phy) + return; + if (!pm_runtime_enabled(&phy->dev)) return; @@ -208,6 +223,9 @@ EXPORT_SYMBOL_GPL(phy_pm_runtime_allow); void phy_pm_runtime_forbid(struct phy *phy) { + if (!phy) + return; + if (!pm_runtime_enabled(&phy->dev)) return; diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 7bfa64baf837..632a0e73ee10 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -1,6 +1,15 @@ # -# Phy drivers for Qualcomm platforms +# Phy drivers for Qualcomm and Atheros platforms # +config PHY_ATH79_USB + tristate "Atheros AR71XX/9XXX USB PHY driver" + depends on OF && (ATH79 || COMPILE_TEST) + default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM + select RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs. + config PHY_QCOM_APQ8064_SATA tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" depends on ARCH_QCOM diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 9abb7899762a..deb831f453ae 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c new file mode 100644 index 000000000000..6fd6e07ab345 --- /dev/null +++ b/drivers/phy/qualcomm/phy-ath79-usb.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Atheros AR71XX/9XXX USB PHY driver + * + * Copyright (C) 2015-2018 Alban Bedel <albeu@free.fr> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/reset.h> + +struct ath79_usb_phy { + struct reset_control *reset; + /* The suspend override logic is inverted, hence the no prefix + * to make the code a bit easier to understand. + */ + struct reset_control *no_suspend_override; +}; + +static int ath79_usb_phy_power_on(struct phy *phy) +{ + struct ath79_usb_phy *priv = phy_get_drvdata(phy); + int err = 0; + + if (priv->no_suspend_override) { + err = reset_control_assert(priv->no_suspend_override); + if (err) + return err; + } + + err = reset_control_deassert(priv->reset); + if (err && priv->no_suspend_override) + reset_control_assert(priv->no_suspend_override); + + return err; +} + +static int ath79_usb_phy_power_off(struct phy *phy) +{ + struct ath79_usb_phy *priv = phy_get_drvdata(phy); + int err = 0; + + err = reset_control_assert(priv->reset); + if (err) + return err; + + if (priv->no_suspend_override) { + err = reset_control_deassert(priv->no_suspend_override); + if (err) + reset_control_deassert(priv->reset); + } + + return err; +} + +static const struct phy_ops ath79_usb_phy_ops = { + .power_on = ath79_usb_phy_power_on, + .power_off = ath79_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static int ath79_usb_phy_probe(struct platform_device *pdev) +{ + struct ath79_usb_phy *priv; + struct phy *phy; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->reset = devm_reset_control_get(&pdev->dev, "usb-phy"); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + priv->no_suspend_override = devm_reset_control_get_optional( + &pdev->dev, "usb-suspend-override"); + if (IS_ERR(priv->no_suspend_override)) + return PTR_ERR(priv->no_suspend_override); + + phy = devm_phy_create(&pdev->dev, NULL, &ath79_usb_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, priv); + + return PTR_ERR_OR_ZERO(devm_of_phy_provider_register( + &pdev->dev, of_phy_simple_xlate)); +} + +static const struct of_device_id ath79_usb_phy_of_match[] = { + { .compatible = "qca,ar7100-usb-phy" }, + {} +}; +MODULE_DEVICE_TABLE(of, ath79_usb_phy_of_match); + +static struct platform_driver ath79_usb_phy_driver = { + .probe = ath79_usb_phy_probe, + .driver = { + .of_match_table = ath79_usb_phy_of_match, + .name = "ath79-usb-phy", + } +}; +module_platform_driver(ath79_usb_phy_driver); + +MODULE_DESCRIPTION("ATH79 USB PHY driver"); +MODULE_AUTHOR("Alban Bedel <albeu@free.fr>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 6470c5d61d1c..4c470104a0d6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -490,6 +490,118 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), }; +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x50), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = { + /* FLL settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), + + /* Lock Det settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb5), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4c), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x64), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6a), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60), +}; + + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -766,6 +878,7 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, .mask_pcs_ready = PHYSTATUS, + .has_pwrdn_delay = true, .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, @@ -774,6 +887,35 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .rx_b_lane_offset = 0x400, }; +static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = qmp_v3_usb3_uniphy_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_serdes_tbl), + .tx_tbl = qmp_v3_usb3_uniphy_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_tx_tbl), + .rx_tbl = qmp_v3_usb3_uniphy_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_rx_tbl), + .pcs_tbl = qmp_v3_usb3_uniphy_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_uniphy_pcs_tbl), + .clk_list = qmp_v3_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = msm8996_phy_vreg_l, + .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .regs = qmp_v3_usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PHYSTATUS, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, +}; + static void qcom_qmp_phy_configure(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -793,19 +935,6 @@ static void qcom_qmp_phy_configure(void __iomem *base, } } -static int qcom_qmp_phy_poweron(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - int ret; - - ret = clk_prepare_enable(qphy->pipe_clk); - if (ret) - dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret); - - return ret; -} - static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; @@ -974,6 +1103,12 @@ static int qcom_qmp_phy_init(struct phy *phy) } } + ret = clk_prepare_enable(qphy->pipe_clk); + if (ret) { + dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret); + goto err_clk_enable; + } + /* Tx, Rx, and PCS configurations */ qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); /* Configuration for other LANE for USB-DP combo PHY */ @@ -1019,6 +1154,8 @@ static int qcom_qmp_phy_init(struct phy *phy) return ret; err_pcs_ready: + clk_disable_unprepare(qphy->pipe_clk); +err_clk_enable: if (cfg->has_lane_rst) reset_control_assert(qphy->lane_rst); err_lane_rst: @@ -1283,7 +1420,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) static const struct phy_ops qcom_qmp_phy_gen_ops = { .init = qcom_qmp_phy_init, .exit = qcom_qmp_phy_exit, - .power_on = qcom_qmp_phy_poweron, .set_mode = qcom_qmp_phy_set_mode, .owner = THIS_MODULE, }; @@ -1381,8 +1517,11 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { .compatible = "qcom,ipq8074-qmp-pcie-phy", .data = &ipq8074_pciephy_cfg, }, { - .compatible = "qcom,qmp-v3-usb3-phy", + .compatible = "qcom,sdm845-qmp-usb3-phy", .data = &qmp_v3_usb3phy_cfg, + }, { + .compatible = "qcom,sdm845-qmp-usb3-uni-phy", + .data = &qmp_v3_usb3_uniphy_cfg, }, { }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index d1c6905d0439..5d78d43ba9fc 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -214,6 +214,8 @@ #define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030 #define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034 #define QSERDES_V3_RX_RX_TERM_BW 0x07c +#define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc +#define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0 #define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8 #define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc #define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d4 @@ -227,6 +229,7 @@ #define QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL 0x10c #define QSERDES_V3_RX_RX_BAND 0x110 #define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c +#define QSERDES_V3_RX_RX_MODE_00 0x164 /* Only for QMP V3 PHY - PCS registers */ #define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004 @@ -273,6 +276,8 @@ #define QPHY_V3_PCS_FLL_CNT_VAL_H_TOL 0x0d0 #define QPHY_V3_PCS_FLL_MAN_CODE 0x0d4 #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8 +#define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c +#define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210 /* Only for QMP V3 PHY - PCS_MISC registers */ #define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 94afeac1a19e..e70e425f26f5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -20,6 +20,8 @@ #include <linux/reset.h> #include <linux/slab.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> + #define QUSB2PHY_PLL_TEST 0x04 #define CLK_REF_SEL BIT(7) @@ -60,6 +62,17 @@ #define CORE_RESET BIT(5) #define CORE_RESET_MUX BIT(6) +/* QUSB2PHY_IMP_CTRL1 register bits */ +#define IMP_RES_OFFSET_MASK GENMASK(5, 0) +#define IMP_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_PORT_TUNE1 register bits */ +#define HSTX_TRIM_MASK GENMASK(7, 4) +#define HSTX_TRIM_SHIFT 0x4 +#define PREEMPH_WIDTH_HALF_BIT BIT(2) +#define PREEMPHASIS_EN_MASK GENMASK(1, 0) +#define PREEMPHASIS_EN_SHIFT 0x0 + #define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 #define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c #define QUSB2PHY_PLL_CMODE 0x2c @@ -139,7 +152,7 @@ static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = { QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), }; -static const unsigned int qusb2_v2_regs_layout[] = { +static const unsigned int sdm845_regs_layout[] = { [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, [QUSB2PHY_PLL_STATUS] = 0x1a0, [QUSB2PHY_PORT_TUNE1] = 0x240, @@ -153,7 +166,7 @@ static const unsigned int qusb2_v2_regs_layout[] = { [QUSB2PHY_INTR_CTRL] = 0x230, }; -static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { +static const struct qusb2_phy_init_tbl sdm845_init_tbl[] = { QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), @@ -208,10 +221,10 @@ static const struct qusb2_phy_cfg msm8996_phy_cfg = { .autoresume_en = BIT(3), }; -static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { - .tbl = qusb2_v2_init_tbl, - .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), - .regs = qusb2_v2_regs_layout, +static const struct qusb2_phy_cfg sdm845_phy_cfg = { + .tbl = sdm845_init_tbl, + .tbl_num = ARRAY_SIZE(sdm845_init_tbl), + .regs = sdm845_regs_layout, .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | POWER_DOWN), @@ -241,6 +254,15 @@ static const char * const qusb2_phy_vreg_names[] = { * @tcsr: TCSR syscon register map * @cell: nvmem cell containing phy tuning value * + * @override_imp_res_offset: PHY should use different rescode offset + * @imp_res_offset_value: rescode offset to be updated in IMP_CTRL1 register + * @override_hstx_trim: PHY should use different HSTX o/p current value + * @hstx_trim_value: HSTX_TRIM value to be updated in TUNE1 register + * @override_preemphasis: PHY should use different pre-amphasis amplitude + * @preemphasis_level: Amplitude Pre-Emphasis to be updated in TUNE1 register + * @override_preemphasis_width: PHY should use different pre-emphasis duration + * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1 + * * @cfg: phy config data * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme * @phy_initialized: indicate if PHY has been initialized @@ -259,12 +281,35 @@ struct qusb2_phy { struct regmap *tcsr; struct nvmem_cell *cell; + bool override_imp_res_offset; + u8 imp_res_offset_value; + bool override_hstx_trim; + u8 hstx_trim_value; + bool override_preemphasis; + u8 preemphasis_level; + bool override_preemphasis_width; + u8 preemphasis_width; + const struct qusb2_phy_cfg *cfg; bool has_se_clk_scheme; bool phy_initialized; enum phy_mode mode; }; +static inline void qusb2_write_mask(void __iomem *base, u32 offset, + u32 val, u32 mask) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~mask; + reg |= val & mask; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val) { u32 reg; @@ -305,6 +350,42 @@ void qcom_qusb2_phy_configure(void __iomem *base, } /* + * Update board specific PHY tuning override values if specified from + * device tree. + */ +static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy) +{ + const struct qusb2_phy_cfg *cfg = qphy->cfg; + + if (qphy->override_imp_res_offset) + qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1, + qphy->imp_res_offset_value << IMP_RES_OFFSET_SHIFT, + IMP_RES_OFFSET_MASK); + + if (qphy->override_hstx_trim) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + qphy->hstx_trim_value << HSTX_TRIM_SHIFT, + HSTX_TRIM_MASK); + + if (qphy->override_preemphasis) + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + qphy->preemphasis_level << PREEMPHASIS_EN_SHIFT, + PREEMPHASIS_EN_MASK); + + if (qphy->override_preemphasis_width) { + if (qphy->preemphasis_width == + QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT) + qusb2_setbits(qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1], + PREEMPH_WIDTH_HALF_BIT); + else + qusb2_clrbits(qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1], + PREEMPH_WIDTH_HALF_BIT); + } +} + +/* * Fetches HS Tx tuning value from nvmem and sets the * QUSB2PHY_PORT_TUNE1/2 register. * For error case, skip setting the value and use the default value. @@ -315,6 +396,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) const struct qusb2_phy_cfg *cfg = qphy->cfg; u8 *val; + /* efuse register is optional */ + if (!qphy->cell) + return; + /* * Read efuse register having TUNE2/1 parameter's high nibble. * If efuse register shows value as 0x0, or if we fail to find @@ -521,6 +606,9 @@ static int qusb2_phy_init(struct phy *phy) qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, cfg->tbl_num); + /* Override board specific PHY tuning values */ + qusb2_phy_override_phy_params(qphy); + /* Set efuse value for tuning the PHY */ qusb2_phy_set_tune2_param(qphy); @@ -643,8 +731,8 @@ static const struct of_device_id qusb2_phy_of_match_table[] = { .compatible = "qcom,msm8996-qusb2-phy", .data = &msm8996_phy_cfg, }, { - .compatible = "qcom,qusb2-v2-phy", - .data = &qusb2_v2_phy_cfg, + .compatible = "qcom,sdm845-qusb2-phy", + .data = &sdm845_phy_cfg, }, { }, }; @@ -664,6 +752,7 @@ static int qusb2_phy_probe(struct platform_device *pdev) struct resource *res; int ret, i; int num; + u32 value; qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); if (!qphy) @@ -732,6 +821,31 @@ static int qusb2_phy_probe(struct platform_device *pdev) qphy->cell = NULL; dev_dbg(dev, "failed to lookup tune2 hstx trim value\n"); } + + if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value", + &value)) { + qphy->imp_res_offset_value = (u8)value; + qphy->override_imp_res_offset = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value", + &value)) { + qphy->hstx_trim_value = (u8)value; + qphy->override_hstx_trim = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level", + &value)) { + qphy->preemphasis_level = (u8)value; + qphy->override_preemphasis = true; + } + + if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width", + &value)) { + qphy->preemphasis_width = (u8)value; + qphy->override_preemphasis_width = true; + } + pm_runtime_set_active(dev); pm_runtime_enable(dev); /* diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c index c198886f80a3..00d89599c67d 100644 --- a/drivers/phy/samsung/phy-exynos-mipi-video.c +++ b/drivers/phy/samsung/phy-exynos-mipi-video.c @@ -231,33 +231,27 @@ struct exynos_mipi_video_phy { static int __set_phy_state(const struct exynos_mipi_phy_desc *data, struct exynos_mipi_video_phy *state, unsigned int on) { - u32 val; + struct regmap *enable_map = state->regmaps[data->enable_map]; + struct regmap *resetn_map = state->regmaps[data->resetn_map]; spin_lock(&state->slock); /* disable in PMU sysreg */ if (!on && data->coupled_phy_id >= 0 && - state->phys[data->coupled_phy_id].phy->power_count == 0) { - regmap_read(state->regmaps[data->enable_map], data->enable_reg, - &val); - val &= ~data->enable_val; - regmap_write(state->regmaps[data->enable_map], data->enable_reg, - val); - } - + state->phys[data->coupled_phy_id].phy->power_count == 0) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, 0); /* PHY reset */ - regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val); - val = on ? (val | data->resetn_val) : (val & ~data->resetn_val); - regmap_write(state->regmaps[data->resetn_map], data->resetn_reg, val); - + if (on) + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, data->resetn_val); + else + regmap_update_bits(resetn_map, data->resetn_reg, + data->resetn_val, 0); /* enable in PMU sysreg */ - if (on) { - regmap_read(state->regmaps[data->enable_map], data->enable_reg, - &val); - val |= data->enable_val; - regmap_write(state->regmaps[data->enable_map], data->enable_reg, - val); - } + if (on) + regmap_update_bits(enable_map, data->enable_reg, + data->enable_val, data->enable_val); spin_unlock(&state->slock); diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index bc4e78a19c91..1255cd1d9a60 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -71,7 +71,6 @@ struct stm32_usbphyc { struct stm32_usbphyc_phy **phys; int nphys; int switch_setup; - bool pll_enabled; }; static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) @@ -84,7 +83,8 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) writel_relaxed(readl_relaxed(reg) & ~bits, reg); } -static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params) +static void stm32_usbphyc_get_pll_params(u32 clk_rate, + struct pll_params *pll_params) { unsigned long long fvco, ndiv, frac; @@ -271,7 +271,6 @@ static struct phy *stm32_usbphyc_of_xlate(struct device *dev, struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); struct stm32_usbphyc_phy *usbphyc_phy = NULL; struct device_node *phynode = args->np; - int port = 0; for (port = 0; port < usbphyc->nphys; port++) { @@ -367,8 +366,8 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) if (IS_ERR(phy)) { ret = PTR_ERR(phy); if (ret != -EPROBE_DEFER) - dev_err(dev, - "failed to create phy%d: %d\n", i, ret); + dev_err(dev, "failed to create phy%d: %d\n", + port, ret); goto put_child; } diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 11aa5902a9ac..de1b4ebe4de2 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -102,19 +102,6 @@ tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index) return np; } -static int -tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane, - const char *function) -{ - unsigned int i; - - for (i = 0; i < lane->soc->num_funcs; i++) - if (strcmp(function, lane->soc->funcs[i]) == 0) - return i; - - return -EINVAL; -} - int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane, struct device_node *np) { @@ -126,7 +113,7 @@ int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane, if (err < 0) return err; - err = tegra_xusb_lane_lookup_function(lane, function); + err = match_string(lane->soc->funcs, lane->soc->num_funcs, function); if (err < 0) { dev_err(dev, "invalid function \"%s\" for lane \"%s\"\n", function, np->name); diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 566644bb496a..f27cb186437d 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -866,6 +866,7 @@ config ACPI_CMPC config INTEL_CHT_INT33FE tristate "Intel Cherry Trail ACPI INT33FE Driver" depends on X86 && ACPI && I2C && REGULATOR + depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m) ---help--- This driver add support for the INT33FE ACPI device found on some Intel Cherry Trail devices. @@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE i2c drivers for these chips can bind to the them. If you enable this driver it is advised to also select - CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and - CONFIG_BATTERY_MAX17042=m. + CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m. config INTEL_INT0002_VGPIO tristate "Intel ACPI INT0002 Virtual GPIO driver" diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c index feac7b066e6c..f57ab0a27301 100644 --- a/drivers/power/supply/power_supply_core.c +++ b/drivers/power/supply/power_supply_core.c @@ -19,6 +19,7 @@ #include <linux/err.h> #include <linux/of.h> #include <linux/power_supply.h> +#include <linux/property.h> #include <linux/thermal.h> #include "power_supply.h" @@ -843,12 +844,21 @@ __power_supply_register(struct device *parent, { struct device *dev; struct power_supply *psy; - int rc; + int i, rc; if (!parent) pr_warn("%s: Expected proper parent device for '%s'\n", __func__, desc->name); + if (!desc || !desc->name || !desc->properties || !desc->num_properties) + return ERR_PTR(-EINVAL); + + for (i = 0; i < desc->num_properties; ++i) { + if ((desc->properties[i] == POWER_SUPPLY_PROP_USB_TYPE) && + (!desc->usb_types || !desc->num_usb_types)) + return ERR_PTR(-EINVAL); + } + psy = kzalloc(sizeof(*psy), GFP_KERNEL); if (!psy) return ERR_PTR(-ENOMEM); @@ -865,7 +875,8 @@ __power_supply_register(struct device *parent, psy->desc = desc; if (cfg) { psy->drv_data = cfg->drv_data; - psy->of_node = cfg->of_node; + psy->of_node = + cfg->fwnode ? to_of_node(cfg->fwnode) : cfg->of_node; psy->supplied_to = cfg->supplied_to; psy->num_supplicants = cfg->num_supplicants; } diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index 5204f115970f..1350068c401a 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -46,6 +46,11 @@ static const char * const power_supply_type_text[] = { "USB_PD", "USB_PD_DRP", "BrickID" }; +static const char * const power_supply_usb_type_text[] = { + "Unknown", "SDP", "DCP", "CDP", "ACA", "C", + "PD", "PD_DRP", "PD_PPS", "BrickID" +}; + static const char * const power_supply_status_text[] = { "Unknown", "Charging", "Discharging", "Not charging", "Full" }; @@ -73,6 +78,41 @@ static const char * const power_supply_scope_text[] = { "Unknown", "System", "Device" }; +static ssize_t power_supply_show_usb_type(struct device *dev, + enum power_supply_usb_type *usb_types, + ssize_t num_usb_types, + union power_supply_propval *value, + char *buf) +{ + enum power_supply_usb_type usb_type; + ssize_t count = 0; + bool match = false; + int i; + + for (i = 0; i < num_usb_types; ++i) { + usb_type = usb_types[i]; + + if (value->intval == usb_type) { + count += sprintf(buf + count, "[%s] ", + power_supply_usb_type_text[usb_type]); + match = true; + } else { + count += sprintf(buf + count, "%s ", + power_supply_usb_type_text[usb_type]); + } + } + + if (!match) { + dev_warn(dev, "driver reporting unsupported connected type\n"); + return -EINVAL; + } + + if (count) + buf[count - 1] = '\n'; + + return count; +} + static ssize_t power_supply_show_property(struct device *dev, struct device_attribute *attr, char *buf) { @@ -115,6 +155,10 @@ static ssize_t power_supply_show_property(struct device *dev, else if (off == POWER_SUPPLY_PROP_TYPE) return sprintf(buf, "%s\n", power_supply_type_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_USB_TYPE) + return power_supply_show_usb_type(dev, psy->desc->usb_types, + psy->desc->num_usb_types, + &value, buf); else if (off == POWER_SUPPLY_PROP_SCOPE) return sprintf(buf, "%s\n", power_supply_scope_text[value.intval]); @@ -241,6 +285,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(time_to_full_now), POWER_SUPPLY_ATTR(time_to_full_avg), POWER_SUPPLY_ATTR(type), + POWER_SUPPLY_ATTR(usb_type), POWER_SUPPLY_ATTR(scope), POWER_SUPPLY_ATTR(precharge_current), POWER_SUPPLY_ATTR(charge_term_current), diff --git a/drivers/staging/typec/Kconfig b/drivers/staging/typec/Kconfig index 5359f556d203..3aa981fbc8f5 100644 --- a/drivers/staging/typec/Kconfig +++ b/drivers/staging/typec/Kconfig @@ -9,6 +9,14 @@ config TYPEC_TCPCI help Type-C Port Controller driver for TCPCI-compliant controller. +config TYPEC_RT1711H + tristate "Richtek RT1711H Type-C chip driver" + select TYPEC_TCPCI + help + Richtek RT1711H Type-C chip driver that works with + Type-C Port Controller Manager to provide USB PD and USB + Type-C functionalities. + endif endmenu diff --git a/drivers/staging/typec/Makefile b/drivers/staging/typec/Makefile index 53d649abcb53..7803d485e1b3 100644 --- a/drivers/staging/typec/Makefile +++ b/drivers/staging/typec/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o +obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o diff --git a/drivers/staging/typec/tcpci.h b/drivers/staging/typec/tcpci.h index 34c865f0dcf6..303ebde26546 100644 --- a/drivers/staging/typec/tcpci.h +++ b/drivers/staging/typec/tcpci.h @@ -59,6 +59,7 @@ #define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0) #define TCPC_CC_STATUS 0x1d +#define TCPC_CC_STATUS_TOGGLING BIT(5) #define TCPC_CC_STATUS_TERM BIT(4) #define TCPC_CC_STATUS_CC2_SHIFT 2 #define TCPC_CC_STATUS_CC2_MASK 0x3 diff --git a/drivers/staging/typec/tcpci_rt1711h.c b/drivers/staging/typec/tcpci_rt1711h.c new file mode 100644 index 000000000000..017389021b96 --- /dev/null +++ b/drivers/staging/typec/tcpci_rt1711h.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Richtek Technology Corporation + * + * Richtek RT1711H Type-C Chip Driver + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/gpio/consumer.h> +#include <linux/usb/tcpm.h> +#include <linux/regmap.h> +#include "tcpci.h" + +#define RT1711H_VID 0x29CF +#define RT1711H_PID 0x1711 + +#define RT1711H_RTCTRL8 0x9B + +/* Autoidle timeout = (tout * 2 + 1) * 6.4ms */ +#define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \ + (((ck300) << 7) | ((ship_off) << 5) | \ + ((auto_idle) << 3) | ((tout) & 0x07)) + +#define RT1711H_RTCTRL11 0x9E + +/* I2C timeout = (tout + 1) * 12.5ms */ +#define RT1711H_RTCTRL11_SET(en, tout) \ + (((en) << 7) | ((tout) & 0x0F)) + +#define RT1711H_RTCTRL13 0xA0 +#define RT1711H_RTCTRL14 0xA1 +#define RT1711H_RTCTRL15 0xA2 +#define RT1711H_RTCTRL16 0xA3 + +struct rt1711h_chip { + struct tcpci_data data; + struct tcpci *tcpci; + struct device *dev; +}; + +static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16)); +} + +static int rt1711h_write16(struct rt1711h_chip *chip, unsigned int reg, u16 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16)); +} + +static int rt1711h_read8(struct rt1711h_chip *chip, unsigned int reg, u8 *val) +{ + return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8)); +} + +static int rt1711h_write8(struct rt1711h_chip *chip, unsigned int reg, u8 val) +{ + return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8)); +} + +static const struct regmap_config rt1711h_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0xFF, /* 0x80 .. 0xFF are vendor defined */ +}; + +static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata) +{ + return container_of(tdata, struct rt1711h_chip, data); +} + +static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + int ret; + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + + /* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL8, + RT1711H_RTCTRL8_SET(0, 1, 1, 2)); + if (ret < 0) + return ret; + + /* I2C reset : (val + 1) * 12.5ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL11, + RT1711H_RTCTRL11_SET(1, 0x0F)); + if (ret < 0) + return ret; + + /* tTCPCfilter : (26.7 * val) us */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL14, 0x0F); + if (ret < 0) + return ret; + + /* tDRP : (51.2 + 6.4 * val) ms */ + ret = rt1711h_write8(chip, RT1711H_RTCTRL15, 0x04); + if (ret < 0) + return ret; + + /* dcSRC.DRP : 33% */ + return rt1711h_write16(chip, RT1711H_RTCTRL16, 330); +} + +static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata, + bool enable) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + + return rt1711h_write8(chip, RT1711H_RTCTRL8, + RT1711H_RTCTRL8_SET(0, 1, !enable, 2)); +} + +static int rt1711h_start_drp_toggling(struct tcpci *tcpci, + struct tcpci_data *tdata, + enum typec_cc_status cc) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + int ret; + unsigned int reg = 0; + + switch (cc) { + default: + case TYPEC_CC_RP_DEF: + reg |= (TCPC_ROLE_CTRL_RP_VAL_DEF << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_1_5: + reg |= (TCPC_ROLE_CTRL_RP_VAL_1_5 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + case TYPEC_CC_RP_3_0: + reg |= (TCPC_ROLE_CTRL_RP_VAL_3_0 << + TCPC_ROLE_CTRL_RP_VAL_SHIFT); + break; + } + + if (cc == TYPEC_CC_RD) + reg |= (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT); + else + reg |= (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT) | + (TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT); + + ret = rt1711h_write8(chip, TCPC_ROLE_CTRL, reg); + if (ret < 0) + return ret; + usleep_range(500, 1000); + + return 0; +} + +static irqreturn_t rt1711h_irq(int irq, void *dev_id) +{ + int ret; + u16 alert; + u8 status; + struct rt1711h_chip *chip = dev_id; + + if (!chip->tcpci) + return IRQ_HANDLED; + + ret = rt1711h_read16(chip, TCPC_ALERT, &alert); + if (ret < 0) + goto out; + + if (alert & TCPC_ALERT_CC_STATUS) { + ret = rt1711h_read8(chip, TCPC_CC_STATUS, &status); + if (ret < 0) + goto out; + /* Clear cc change event triggered by starting toggling */ + if (status & TCPC_CC_STATUS_TOGGLING) + rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS); + } + +out: + return tcpci_irq(chip->tcpci); +} + +static int rt1711h_init_alert(struct rt1711h_chip *chip, + struct i2c_client *client) +{ + int ret; + + /* Disable chip interrupts before requesting irq */ + ret = rt1711h_write16(chip, TCPC_ALERT_MASK, 0); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(chip->dev, client->irq, NULL, + rt1711h_irq, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(chip->dev), chip); + if (ret < 0) + return ret; + enable_irq_wake(client->irq); + return 0; +} + +static int rt1711h_sw_reset(struct rt1711h_chip *chip) +{ + int ret; + + ret = rt1711h_write8(chip, RT1711H_RTCTRL13, 0x01); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + return 0; +} + +static int rt1711h_check_revision(struct i2c_client *i2c) +{ + int ret; + + ret = i2c_smbus_read_word_data(i2c, TCPC_VENDOR_ID); + if (ret < 0) + return ret; + if (ret != RT1711H_VID) { + dev_err(&i2c->dev, "vid is not correct, 0x%04x\n", ret); + return -ENODEV; + } + ret = i2c_smbus_read_word_data(i2c, TCPC_PRODUCT_ID); + if (ret < 0) + return ret; + if (ret != RT1711H_PID) { + dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret); + return -ENODEV; + } + return 0; +} + +static int rt1711h_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + int ret; + struct rt1711h_chip *chip; + + ret = rt1711h_check_revision(client); + if (ret < 0) { + dev_err(&client->dev, "check vid/pid fail\n"); + return ret; + } + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->data.regmap = devm_regmap_init_i2c(client, + &rt1711h_regmap_config); + if (IS_ERR(chip->data.regmap)) + return PTR_ERR(chip->data.regmap); + + chip->dev = &client->dev; + i2c_set_clientdata(client, chip); + + ret = rt1711h_sw_reset(chip); + if (ret < 0) + return ret; + + ret = rt1711h_init_alert(chip, client); + if (ret < 0) + return ret; + + chip->data.init = rt1711h_init; + chip->data.set_vconn = rt1711h_set_vconn; + chip->data.start_drp_toggling = rt1711h_start_drp_toggling; + chip->tcpci = tcpci_register_port(chip->dev, &chip->data); + if (IS_ERR_OR_NULL(chip->tcpci)) + return PTR_ERR(chip->tcpci); + + return 0; +} + +static int rt1711h_remove(struct i2c_client *client) +{ + struct rt1711h_chip *chip = i2c_get_clientdata(client); + + tcpci_unregister_port(chip->tcpci); + return 0; +} + +static const struct i2c_device_id rt1711h_id[] = { + { "rt1711h", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1711h_id); + +#ifdef CONFIG_OF +static const struct of_device_id rt1711h_of_match[] = { + { .compatible = "richtek,rt1711h", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1711h_of_match); +#endif + +static struct i2c_driver rt1711h_i2c_driver = { + .driver = { + .name = "rt1711h", + .of_match_table = of_match_ptr(rt1711h_of_match), + }, + .probe = rt1711h_probe, + .remove = rt1711h_remove, + .id_table = rt1711h_id, +}; +module_i2c_driver(rt1711h_i2c_driver); + +MODULE_AUTHOR("ShuFan Lee <shufan_lee@richtek.com>"); +MODULE_DESCRIPTION("RT1711H USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index d9b561d89432..d99fec44036c 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -290,7 +290,7 @@ EXPORT_SYMBOL(tty_termios_copy_hw); * between the two termios structures, or a speed change is needed. */ -int tty_termios_hw_change(struct ktermios *a, struct ktermios *b) +int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b) { if (a->c_ispeed != b->c_ispeed || a->c_ospeed != b->c_ospeed) return 1; diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 98b7cb3d0064..0bf244d50544 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -450,7 +450,7 @@ void hw_phymode_configure(struct ci_hdrc *ci); void ci_platform_configure(struct ci_hdrc *ci); -int dbg_create_files(struct ci_hdrc *ci); +void dbg_create_files(struct ci_hdrc *ci); void dbg_remove_files(struct ci_hdrc *ci); #endif /* __DRIVERS_USB_CHIPIDEA_CI_H */ diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index e431c5aafe35..19f5f5f2a48a 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -291,7 +291,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) pdata.usb_phy = data->phy; - if (of_device_is_compatible(np, "fsl,imx53-usb") && pdata.usb_phy && + if ((of_device_is_compatible(np, "fsl,imx53-usb") || + of_device_is_compatible(np, "fsl,imx51-usb")) && pdata.usb_phy && of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) { pdata.flags |= CI_HDRC_OVERRIDE_PHY_CONTROL; data->override_phy_control = true; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 33ae87fa3ff3..85fc6db48e44 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -1062,9 +1062,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci_hdrc_otg_fsm_start(ci); device_set_wakeup_capable(&pdev->dev, true); - ret = dbg_create_files(ci); - if (ret) - goto stop; + dbg_create_files(ci); ret = sysfs_create_group(&dev->kobj, &ci_attr_group); if (ret) diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index ce648cb3ed94..fcc91a338875 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -340,54 +340,28 @@ DEFINE_SHOW_ATTRIBUTE(ci_registers); * * This function returns an error code */ -int dbg_create_files(struct ci_hdrc *ci) +void dbg_create_files(struct ci_hdrc *ci) { - struct dentry *dent; - ci->debugfs = debugfs_create_dir(dev_name(ci->dev), NULL); - if (!ci->debugfs) - return -ENOMEM; - - dent = debugfs_create_file("device", S_IRUGO, ci->debugfs, ci, - &ci_device_fops); - if (!dent) - goto err; - - dent = debugfs_create_file("port_test", S_IRUGO | S_IWUSR, ci->debugfs, - ci, &ci_port_test_fops); - if (!dent) - goto err; - - dent = debugfs_create_file("qheads", S_IRUGO, ci->debugfs, ci, - &ci_qheads_fops); - if (!dent) - goto err; - dent = debugfs_create_file("requests", S_IRUGO, ci->debugfs, ci, - &ci_requests_fops); - if (!dent) - goto err; + debugfs_create_file("device", S_IRUGO, ci->debugfs, ci, + &ci_device_fops); + debugfs_create_file("port_test", S_IRUGO | S_IWUSR, ci->debugfs, ci, + &ci_port_test_fops); + debugfs_create_file("qheads", S_IRUGO, ci->debugfs, ci, + &ci_qheads_fops); + debugfs_create_file("requests", S_IRUGO, ci->debugfs, ci, + &ci_requests_fops); if (ci_otg_is_fsm_mode(ci)) { - dent = debugfs_create_file("otg", S_IRUGO, ci->debugfs, ci, - &ci_otg_fops); - if (!dent) - goto err; + debugfs_create_file("otg", S_IRUGO, ci->debugfs, ci, + &ci_otg_fops); } - dent = debugfs_create_file("role", S_IRUGO | S_IWUSR, ci->debugfs, ci, - &ci_role_fops); - if (!dent) - goto err; - - dent = debugfs_create_file("registers", S_IRUGO, ci->debugfs, ci, - &ci_registers_fops); - - if (dent) - return 0; -err: - debugfs_remove_recursive(ci->debugfs); - return -ENOMEM; + debugfs_create_file("role", S_IRUGO | S_IWUSR, ci->debugfs, ci, + &ci_role_fops); + debugfs_create_file("registers", S_IRUGO, ci->debugfs, ci, + &ci_registers_fops); } /** diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index bdb1de0c0cef..529295a17579 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -21,7 +21,6 @@ #include <linux/usb/tmc.h> -#define RIGOL 1 #define USBTMC_HEADER_SIZE 12 #define USBTMC_MINOR_BASE 176 @@ -93,8 +92,6 @@ struct usbtmc_device_data { /* coalesced usb488_caps from usbtmc_dev_capabilities */ __u8 usb488_caps; - u8 rigol_quirk; - /* attributes from the USB TMC spec for this device */ u8 TermChar; bool TermCharEnabled; @@ -110,17 +107,6 @@ struct usbtmc_device_data { }; #define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref) -struct usbtmc_ID_rigol_quirk { - __u16 idVendor; - __u16 idProduct; -}; - -static const struct usbtmc_ID_rigol_quirk usbtmc_id_quirk[] = { - { 0x1ab1, 0x0588 }, - { 0x1ab1, 0x04b0 }, - { 0, 0 } -}; - /* Forward declarations */ static struct usb_driver usbtmc_driver; @@ -603,16 +589,14 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, goto exit; } - if (data->rigol_quirk) { - dev_dbg(dev, "usb_bulk_msg_in: count(%zu)\n", count); + dev_dbg(dev, "usb_bulk_msg_in: count(%zu)\n", count); - retval = send_request_dev_dep_msg_in(data, count); + retval = send_request_dev_dep_msg_in(data, count); - if (retval < 0) { - if (data->auto_abort) - usbtmc_ioctl_abort_bulk_out(data); - goto exit; - } + if (retval < 0) { + if (data->auto_abort) + usbtmc_ioctl_abort_bulk_out(data); + goto exit; } /* Loop until we have fetched everything we requested */ @@ -621,23 +605,6 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, done = 0; while (remaining > 0) { - if (!data->rigol_quirk) { - dev_dbg(dev, "usb_bulk_msg_in: remaining(%zu), count(%zu)\n", remaining, count); - - if (remaining > USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3) - this_part = USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3; - else - this_part = remaining; - - retval = send_request_dev_dep_msg_in(data, this_part); - if (retval < 0) { - dev_err(dev, "usb_bulk_msg returned %d\n", retval); - if (data->auto_abort) - usbtmc_ioctl_abort_bulk_out(data); - goto exit; - } - } - /* Send bulk URB */ retval = usb_bulk_msg(data->usb_dev, usb_rcvbulkpipe(data->usb_dev, @@ -658,7 +625,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, } /* Parse header in first packet */ - if ((done == 0) || !data->rigol_quirk) { + if (done == 0) { /* Sanity checks for the header */ if (actual < USBTMC_HEADER_SIZE) { dev_err(dev, "Device sent too small first packet: %u < %u\n", actual, USBTMC_HEADER_SIZE); @@ -698,20 +665,11 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, actual -= USBTMC_HEADER_SIZE; /* Check if the message is smaller than requested */ - if (data->rigol_quirk) { - if (remaining > n_characters) - remaining = n_characters; - /* Remove padding if it exists */ - if (actual > remaining) - actual = remaining; - } - else { - if (this_part > n_characters) - this_part = n_characters; - /* Remove padding if it exists */ - if (actual > this_part) - actual = this_part; - } + if (remaining > n_characters) + remaining = n_characters; + /* Remove padding if it exists */ + if (actual > remaining) + actual = remaining; dev_dbg(dev, "Bulk-IN header: N_characters(%u), bTransAttr(%u)\n", n_characters, buffer[8]); @@ -1365,7 +1323,6 @@ static int usbtmc_probe(struct usb_interface *intf, struct usbtmc_device_data *data; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *bulk_in, *bulk_out, *int_in; - int n; int retcode; dev_dbg(&intf->dev, "%s called\n", __func__); @@ -1385,20 +1342,6 @@ static int usbtmc_probe(struct usb_interface *intf, atomic_set(&data->srq_asserted, 0); data->zombie = 0; - /* Determine if it is a Rigol or not */ - data->rigol_quirk = 0; - dev_dbg(&intf->dev, "Trying to find if device Vendor 0x%04X Product 0x%04X has the RIGOL quirk\n", - le16_to_cpu(data->usb_dev->descriptor.idVendor), - le16_to_cpu(data->usb_dev->descriptor.idProduct)); - for(n = 0; usbtmc_id_quirk[n].idVendor > 0; n++) { - if ((usbtmc_id_quirk[n].idVendor == le16_to_cpu(data->usb_dev->descriptor.idVendor)) && - (usbtmc_id_quirk[n].idProduct == le16_to_cpu(data->usb_dev->descriptor.idProduct))) { - dev_dbg(&intf->dev, "Setting this device as having the RIGOL quirk\n"); - data->rigol_quirk = 1; - break; - } - } - /* Initialize USBTMC bTag and other fields */ data->bTag = 1; data->TermCharEnabled = 0; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0a42c5df3c0f..1c21955fe7c0 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -33,7 +33,6 @@ #include <linux/phy/phy.h> #include <linux/usb.h> #include <linux/usb/hcd.h> -#include <linux/usb/phy.h> #include <linux/usb/otg.h> #include "usb.h" @@ -568,6 +567,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) switch (wValue & 0xff00) { case USB_DT_DEVICE << 8: switch (hcd->speed) { + case HCD_USB32: case HCD_USB31: bufp = usb31_rh_dev_descriptor; break; @@ -592,6 +592,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) break; case USB_DT_CONFIG << 8: switch (hcd->speed) { + case HCD_USB32: case HCD_USB31: case HCD_USB3: bufp = ss_rh_config_descriptor; @@ -2742,34 +2743,14 @@ int usb_add_hcd(struct usb_hcd *hcd, int retval; struct usb_device *rhdev; - if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->skip_phy_initialization) { - struct usb_phy *phy = usb_get_phy_dev(hcd->self.sysdev, 0); - - if (IS_ERR(phy)) { - retval = PTR_ERR(phy); - if (retval == -EPROBE_DEFER) - return retval; - } else { - retval = usb_phy_init(phy); - if (retval) { - usb_put_phy(phy); - return retval; - } - hcd->usb_phy = phy; - hcd->remove_phy = 1; - } - } - if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); - if (IS_ERR(hcd->phy_roothub)) { - retval = PTR_ERR(hcd->phy_roothub); - goto err_phy_roothub_alloc; - } + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); retval = usb_phy_roothub_init(hcd->phy_roothub); if (retval) - goto err_phy_roothub_alloc; + return retval; retval = usb_phy_roothub_power_on(hcd->phy_roothub); if (retval) @@ -2819,6 +2800,9 @@ int usb_add_hcd(struct usb_hcd *hcd, hcd->self.root_hub = rhdev; mutex_unlock(&usb_port_peer_mutex); + rhdev->rx_lanes = 1; + rhdev->tx_lanes = 1; + switch (hcd->speed) { case HCD_USB11: rhdev->speed = USB_SPEED_FULL; @@ -2832,6 +2816,10 @@ int usb_add_hcd(struct usb_hcd *hcd, case HCD_USB3: rhdev->speed = USB_SPEED_SUPER; break; + case HCD_USB32: + rhdev->rx_lanes = 2; + rhdev->tx_lanes = 2; + /* fall through */ case HCD_USB31: rhdev->speed = USB_SPEED_SUPER_PLUS; break; @@ -2943,12 +2931,7 @@ err_create_buf: usb_phy_roothub_power_off(hcd->phy_roothub); err_usb_phy_roothub_power_on: usb_phy_roothub_exit(hcd->phy_roothub); -err_phy_roothub_alloc: - if (hcd->remove_phy && hcd->usb_phy) { - usb_phy_shutdown(hcd->usb_phy); - usb_put_phy(hcd->usb_phy); - hcd->usb_phy = NULL; - } + return retval; } EXPORT_SYMBOL_GPL(usb_add_hcd); @@ -3024,12 +3007,6 @@ void usb_remove_hcd(struct usb_hcd *hcd) usb_phy_roothub_power_off(hcd->phy_roothub); usb_phy_roothub_exit(hcd->phy_roothub); - if (hcd->remove_phy && hcd->usb_phy) { - usb_phy_shutdown(hcd->usb_phy); - usb_put_phy(hcd->usb_phy); - hcd->usb_phy = NULL; - } - usb_put_invalidate_rhdev(hcd); hcd->flags = 0; } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index aa9968d90a48..26c2438d2889 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2636,7 +2636,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 #define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first) +#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)scheme) #define HUB_ROOT_RESET_TIME 60 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 @@ -2651,12 +2651,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub) * enumeration failures, so disable this enumeration scheme for USB3 * devices. */ -static bool use_new_scheme(struct usb_device *udev, int retry) +static bool use_new_scheme(struct usb_device *udev, int retry, + struct usb_port *port_dev) { + int old_scheme_first_port = + port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME; + if (udev->speed >= USB_SPEED_SUPER) return false; - return USE_NEW_SCHEME(retry); + return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first); } /* Is a USB 3.0 port in the Inactive or Compliance Mode state? @@ -2751,6 +2755,14 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (!udev) return 0; + if (hub_is_superspeedplus(hub->hdev)) { + /* extended portstatus Rx and Tx lane count are zero based */ + udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1; + udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1; + } else { + udev->rx_lanes = 1; + udev->tx_lanes = 1; + } if (hub_is_wusb(hub)) udev->speed = USB_SPEED_WIRELESS; else if (hub_is_superspeedplus(hub->hdev) && @@ -2867,7 +2879,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { /* TRSTRCY = 10 ms; plus some extra */ - msleep(10 + 40); + if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) + usleep_range(10000, 12000); + else + msleep(10 + 40); + if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); @@ -3376,6 +3392,10 @@ static int wait_for_connected(struct usb_device *udev, while (delay_ms < 2000) { if (status || *portstatus & USB_PORT_STAT_CONNECTION) break; + if (!port_is_power_on(hub, *portstatus)) { + status = -ENODEV; + break; + } msleep(20); delay_ms += 20; status = hub_port_status(hub, *port1, portstatus, portchange); @@ -4380,6 +4400,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, { struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_port *port_dev = hub->ports[port1 - 1]; int retries, operations, retval, i; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; @@ -4501,7 +4522,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { bool did_new_scheme = false; - if (use_new_scheme(udev, retry_counter)) { + if (use_new_scheme(udev, retry_counter, port_dev)) { struct usb_device_descriptor *buf; int r = 0; @@ -4551,7 +4572,9 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * reset. But only on the first attempt, * lest we get into a time out/reset loop */ - if (r == 0 || (r == -ETIMEDOUT && retries == 0)) + if (r == 0 || (r == -ETIMEDOUT && + retries == 0 && + udev->speed > USB_SPEED_FULL)) break; } udev->descriptor.bMaxPacketSize0 = @@ -4598,9 +4621,12 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, if (udev->speed >= USB_SPEED_SUPER) { devnum = udev->devnum; dev_info(&udev->dev, - "%s SuperSpeed%s USB device number %d using %s\n", + "%s SuperSpeed%s%s USB device number %d using %s\n", (udev->config) ? "reset" : "new", - (udev->speed == USB_SPEED_SUPER_PLUS) ? "Plus" : "", + (udev->speed == USB_SPEED_SUPER_PLUS) ? + "Plus Gen 2" : " Gen 1", + (udev->rx_lanes == 2 && udev->tx_lanes == 2) ? + "x2" : "", devnum, driver_name); } diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 4dc769ee9c74..4accfb63f7dc 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -98,6 +98,7 @@ struct usb_port { struct mutex status_lock; u32 over_current_count; u8 portnum; + u32 quirks; unsigned int is_superspeed:1; unsigned int usb3_lpm_u1_permit:1; unsigned int usb3_lpm_u2_permit:1; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 0c11d40a12bc..7b137003c2be 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -940,7 +940,7 @@ int usb_set_isoch_delay(struct usb_device *dev) return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_ISOCH_DELAY, USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - cpu_to_le16(dev->hub_delay), 0, NULL, 0, + dev->hub_delay, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); } diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 6979bde87d31..4a2143195395 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -50,6 +50,28 @@ static ssize_t over_current_count_show(struct device *dev, } static DEVICE_ATTR_RO(over_current_count); +static ssize_t quirks_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_port *port_dev = to_usb_port(dev); + + return sprintf(buf, "%08x\n", port_dev->quirks); +} + +static ssize_t quirks_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_port *port_dev = to_usb_port(dev); + u32 value; + + if (kstrtou32(buf, 16, &value)) + return -EINVAL; + + port_dev->quirks = value; + return count; +} +static DEVICE_ATTR_RW(quirks); + static ssize_t usb3_lpm_permit_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -118,6 +140,7 @@ static DEVICE_ATTR_RW(usb3_lpm_permit); static struct attribute *port_dev_attrs[] = { &dev_attr_connect_type.attr, + &dev_attr_quirks.attr, &dev_attr_over_current_count.attr, NULL, }; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 27bb34043053..ea18284dfa9a 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -175,6 +175,26 @@ static ssize_t speed_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(speed); +static ssize_t rx_lanes_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "%d\n", udev->rx_lanes); +} +static DEVICE_ATTR_RO(rx_lanes); + +static ssize_t tx_lanes_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "%d\n", udev->tx_lanes); +} +static DEVICE_ATTR_RO(tx_lanes); + static ssize_t busnum_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -790,6 +810,8 @@ static struct attribute *dev_attrs[] = { &dev_attr_bNumConfigurations.attr, &dev_attr_bMaxPacketSize0.attr, &dev_attr_speed.attr, + &dev_attr_rx_lanes.attr, + &dev_attr_tx_lanes.attr, &dev_attr_busnum.attr, &dev_attr_devnum.attr, &dev_attr_devpath.attr, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0adb6345ff2e..623be3174fb3 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1167,30 +1167,16 @@ static struct notifier_block usb_bus_nb = { struct dentry *usb_debug_root; EXPORT_SYMBOL_GPL(usb_debug_root); -static struct dentry *usb_debug_devices; - -static int usb_debugfs_init(void) +static void usb_debugfs_init(void) { usb_debug_root = debugfs_create_dir("usb", NULL); - if (!usb_debug_root) - return -ENOENT; - - usb_debug_devices = debugfs_create_file("devices", 0444, - usb_debug_root, NULL, - &usbfs_devices_fops); - if (!usb_debug_devices) { - debugfs_remove(usb_debug_root); - usb_debug_root = NULL; - return -ENOENT; - } - - return 0; + debugfs_create_file("devices", 0444, usb_debug_root, NULL, + &usbfs_devices_fops); } static void usb_debugfs_cleanup(void) { - debugfs_remove(usb_debug_devices); - debugfs_remove(usb_debug_root); + debugfs_remove_recursive(usb_debug_root); } /* @@ -1205,9 +1191,7 @@ static int __init usb_init(void) } usb_init_pool_max(); - retval = usb_debugfs_init(); - if (retval) - goto out; + usb_debugfs_init(); usb_acpi_register(); retval = bus_register(&usb_bus_type); diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 18a0a1771289..1c36a6a9dd63 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -419,6 +419,8 @@ static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg, /** * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce * filter is enabled. + * + * @hsotg: Programming view of DWC_otg controller */ static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg) { @@ -564,6 +566,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) * If a force is done, it requires a IDDIG debounce filter delay if * the filter is configured and enabled. We poll the current mode of * the controller to account for this delay. + * + * @hsotg: Programming view of DWC_otg controller + * @host: Host mode flag */ void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) { @@ -610,6 +615,8 @@ void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) * or not because the value of the connector ID status is affected by * the force mode. We only need to call this once during probe if * dr_mode == OTG. + * + * @hsotg: Programming view of DWC_otg controller */ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) { diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index a666e0758a99..4a56ac772a3c 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -164,12 +164,11 @@ struct dwc2_hsotg_req; * and has yet to be completed (maybe due to data move, or simply * awaiting an ack from the core all the data has been completed). * @debugfs: File entry for debugfs file for this endpoint. - * @lock: State lock to protect contents of endpoint. * @dir_in: Set to true if this endpoint is of the IN direction, which * means that it is sending data to the Host. * @index: The index for the endpoint registers. * @mc: Multi Count - number of transactions per microframe - * @interval - Interval for periodic endpoints, in frames or microframes. + * @interval: Interval for periodic endpoints, in frames or microframes. * @name: The name array passed to the USB core. * @halted: Set if the endpoint has been halted. * @periodic: Set if this is a periodic ep, such as Interrupt @@ -178,10 +177,11 @@ struct dwc2_hsotg_req; * @desc_list_dma: The DMA address of descriptor chain currently in use. * @desc_list: Pointer to descriptor DMA chain head currently in use. * @desc_count: Count of entries within the DMA descriptor chain of EP. - * @isoc_chain_num: Number of ISOC chain currently in use - either 0 or 1. * @next_desc: index of next free descriptor in the ISOC chain under SW control. + * @compl_desc: index of next descriptor to be completed by xFerComplete * @total_data: The total number of data bytes done. * @fifo_size: The size of the FIFO (for periodic IN endpoints) + * @fifo_index: For Dedicated FIFO operation, only FIFO0 can be used for EP0. * @fifo_load: The amount of data loaded into the FIFO (periodic IN) * @last_load: The offset of data for the last start of request. * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN @@ -231,8 +231,8 @@ struct dwc2_hsotg_ep { struct dwc2_dma_desc *desc_list; u8 desc_count; - unsigned char isoc_chain_num; unsigned int next_desc; + unsigned int compl_desc; char name[10]; }; @@ -380,6 +380,12 @@ enum dwc2_ep0_state { * is FS. * 0 - No (default) * 1 - Yes + * @ipg_isoc_en: Indicates the IPG supports is enabled or disabled. + * 0 - Disable (default) + * 1 - Enable + * @acg_enable: For enabling Active Clock Gating in the controller + * 0 - No + * 1 - Yes * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only * 0 - No (default) * 1 - Yes @@ -511,6 +517,7 @@ struct dwc2_core_params { bool hird_threshold_en; u8 hird_threshold; bool activate_stm_fs_transceiver; + bool ipg_isoc_en; u16 max_packet_count; u32 max_transfer_size; u32 ahbcfg; @@ -548,7 +555,7 @@ struct dwc2_core_params { * * The values that are not in dwc2_core_params are documented below. * - * @op_mode Mode of Operation + * @op_mode: Mode of Operation * 0 - HNP- and SRP-Capable OTG (Host & Device) * 1 - SRP-Capable OTG (Host & Device) * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device) @@ -556,43 +563,102 @@ struct dwc2_core_params { * 4 - Non-OTG Device * 5 - SRP-Capable Host * 6 - Non-OTG Host - * @arch Architecture + * @arch: Architecture * 0 - Slave only * 1 - External DMA * 2 - Internal DMA - * @power_optimized Are power optimizations enabled? - * @num_dev_ep Number of device endpoints available - * @num_dev_in_eps Number of device IN endpoints available - * @num_dev_perio_in_ep Number of device periodic IN endpoints - * available - * @dev_token_q_depth Device Mode IN Token Sequence Learning Queue + * @ipg_isoc_en: This feature indicates that the controller supports + * the worst-case scenario of Rx followed by Rx + * Interpacket Gap (IPG) (32 bitTimes) as per the utmi + * specification for any token following ISOC OUT token. + * 0 - Don't support + * 1 - Support + * @power_optimized: Are power optimizations enabled? + * @num_dev_ep: Number of device endpoints available + * @num_dev_in_eps: Number of device IN endpoints available + * @num_dev_perio_in_ep: Number of device periodic IN endpoints + * available + * @dev_token_q_depth: Device Mode IN Token Sequence Learning Queue * Depth * 0 to 30 - * @host_perio_tx_q_depth + * @host_perio_tx_q_depth: * Host Mode Periodic Request Queue Depth * 2, 4 or 8 - * @nperio_tx_q_depth + * @nperio_tx_q_depth: * Non-Periodic Request Queue Depth * 2, 4 or 8 - * @hs_phy_type High-speed PHY interface type + * @hs_phy_type: High-speed PHY interface type * 0 - High-speed interface not supported * 1 - UTMI+ * 2 - ULPI * 3 - UTMI+ and ULPI - * @fs_phy_type Full-speed PHY interface type + * @fs_phy_type: Full-speed PHY interface type * 0 - Full speed interface not supported * 1 - Dedicated full speed interface * 2 - FS pins shared with UTMI+ pins * 3 - FS pins shared with ULPI pins * @total_fifo_size: Total internal RAM for FIFOs (bytes) - * @hibernation Is hibernation enabled? - * @utmi_phy_data_width UTMI+ PHY data width + * @hibernation: Is hibernation enabled? + * @utmi_phy_data_width: UTMI+ PHY data width * 0 - 8 bits * 1 - 16 bits * 2 - 8 or 16 bits * @snpsid: Value from SNPSID register * @dev_ep_dirs: Direction of device endpoints (GHWCFG1) - * @g_tx_fifo_size[] Power-on values of TxFIFO sizes + * @g_tx_fifo_size: Power-on values of TxFIFO sizes + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this if none is specified. + * 0 - Address DMA + * 1 - Descriptor DMA (default, if available) + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default, if available) + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs + * are enabled for non-periodic IN endpoints in device + * mode. + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in + * host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @max_transfer_size: The maximum transfer size supported, in bytes + * 2047 to 65,535 + * Actual maximum value is autodetected and also + * the default. + * @max_packet_count: The maximum number of packets in a transfer + * 15 to 511 + * Actual maximum value is autodetected and also + * the default. + * @host_channels: The number of host channel registers to use + * 1 to 16 + * Actual maximum value is autodetected and also + * the default. + * @dev_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in device mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @i2c_enable: Specifies whether to use the I2Cinterface for a full + * speed PHY. This parameter is only applicable if phy_type + * is FS. + * 0 - No (default) + * 1 - Yes + * @acg_enable: For enabling Active Clock Gating in the controller + * 0 - Disable + * 1 - Enable + * @lpm_mode: For enabling Link Power Management in the controller + * 0 - Disable + * 1 - Enable + * @rx_fifo_size: Number of 4-byte words in the Rx FIFO when dynamic + * FIFO sizing is enabled 16 to 32768 + * Actual maximum value is autodetected and also + * the default. */ struct dwc2_hw_params { unsigned op_mode:3; @@ -622,6 +688,7 @@ struct dwc2_hw_params { unsigned hibernation:1; unsigned utmi_phy_data_width:2; unsigned lpm_mode:1; + unsigned ipg_isoc_en:1; u32 snpsid; u32 dev_ep_dirs; u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; @@ -642,7 +709,11 @@ struct dwc2_hw_params { * @gi2cctl: Backup of GI2CCTL register * @glpmcfg: Backup of GLPMCFG register * @gdfifocfg: Backup of GDFIFOCFG register + * @pcgcctl: Backup of PCGCCTL register + * @pcgcctl1: Backup of PCGCCTL1 register + * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint * @gpwrdn: Backup of GPWRDN register + * @valid: True if registers values backuped. */ struct dwc2_gregs_backup { u32 gotgctl; @@ -675,6 +746,7 @@ struct dwc2_gregs_backup { * @doeptsiz: Backup of DOEPTSIZ register * @doepdma: Backup of DOEPDMA register * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint + * @valid: True if registers values backuped. */ struct dwc2_dregs_backup { u32 dcfg; @@ -698,9 +770,10 @@ struct dwc2_dregs_backup { * @hcfg: Backup of HCFG register * @haintmsk: Backup of HAINTMSK register * @hcintmsk: Backup of HCINTMSK register - * @hptr0: Backup of HPTR0 register + * @hprt0: Backup of HPTR0 register * @hfir: Backup of HFIR register * @hptxfsiz: Backup of HPTXFSIZ register + * @valid: True if registers values backuped. */ struct dwc2_hregs_backup { u32 hcfg; @@ -800,7 +873,7 @@ struct dwc2_hregs_backup { * @regs: Pointer to controller regs * @hw_params: Parameters that were autodetected from the * hardware registers - * @core_params: Parameters that define how the core should be configured + * @params: Parameters that define how the core should be configured * @op_state: The operational State, during transitions (a_host=> * a_peripheral and b_device=>b_host) this may not match * the core, but allows the software to determine @@ -809,10 +882,13 @@ struct dwc2_hregs_backup { * - USB_DR_MODE_PERIPHERAL * - USB_DR_MODE_HOST * - USB_DR_MODE_OTG - * @hcd_enabled Host mode sub-driver initialization indicator. - * @gadget_enabled Peripheral mode sub-driver initialization indicator. - * @ll_hw_enabled Status of low-level hardware resources. + * @hcd_enabled: Host mode sub-driver initialization indicator. + * @gadget_enabled: Peripheral mode sub-driver initialization indicator. + * @ll_hw_enabled: Status of low-level hardware resources. * @hibernated: True if core is hibernated + * @frame_number: Frame number read from the core. For both device + * and host modes. The value ranges are from 0 + * to HFNUM_MAX_FRNUM. * @phy: The otg phy transceiver structure for phy control. * @uphy: The otg phy transceiver structure for old USB phy * control. @@ -832,13 +908,25 @@ struct dwc2_hregs_backup { * interrupt * @wkp_timer: Timer object for handling Wakeup Detected interrupt * @lx_state: Lx state of connected device - * @gregs_backup: Backup of global registers during suspend - * @dregs_backup: Backup of device registers during suspend - * @hregs_backup: Backup of host registers during suspend + * @gr_backup: Backup of global registers during suspend + * @dr_backup: Backup of device registers during suspend + * @hr_backup: Backup of host registers during suspend * * These are for host mode: * * @flags: Flags for handling root port state changes + * @flags.d32: Contain all root port flags + * @flags.b: Separate root port flags from each other + * @flags.b.port_connect_status_change: True if root port connect status + * changed + * @flags.b.port_connect_status: True if device connected to root port + * @flags.b.port_reset_change: True if root port reset status changed + * @flags.b.port_enable_change: True if root port enable status changed + * @flags.b.port_suspend_change: True if root port suspend status changed + * @flags.b.port_over_current_change: True if root port over current state + * changed. + * @flags.b.port_l1_change: True if root port l1 status changed + * @flags.b.reserved: Reserved bits of root port register * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. * Transfers associated with these QHs are not currently * assigned to a host channel. @@ -847,6 +935,9 @@ struct dwc2_hregs_backup { * assigned to a host channel. * @non_periodic_qh_ptr: Pointer to next QH to process in the active * non-periodic schedule + * @non_periodic_sched_waiting: Waiting QHs in the non-periodic schedule. + * Transfers associated with these QHs are not currently + * assigned to a host channel. * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a * list of QHs for periodic transfers that are _not_ * scheduled for the next frame. Each QH in the list has an @@ -886,8 +977,6 @@ struct dwc2_hregs_backup { * @hs_periodic_bitmap: Bitmap used by the microframe scheduler any time the * host is in high speed mode; low speed schedules are * stored elsewhere since we need one per TT. - * @frame_number: Frame number read from the core at SOF. The value ranges - * from 0 to HFNUM_MAX_FRNUM. * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for * SOF enable/disable. * @free_hc_list: Free host channels in the controller. This is a list of @@ -898,8 +987,8 @@ struct dwc2_hregs_backup { * host channel is available for non-periodic transactions. * @non_periodic_channels: Number of host channels assigned to non-periodic * transfers - * @available_host_channels Number of host channels available for the microframe - * scheduler to use + * @available_host_channels: Number of host channels available for the + * microframe scheduler to use * @hc_ptr_array: Array of pointers to the host channel descriptors. * Allows accessing a host channel descriptor given the * host channel number. This is useful in interrupt @@ -922,9 +1011,6 @@ struct dwc2_hregs_backup { * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. * @num_of_eps: Number of available EPs (excluding EP0) * @debug_root: Root directrory for debugfs. - * @debug_file: Main status file for debugfs. - * @debug_testmode: Testmode status file for debugfs. - * @debug_fifo: FIFO status file for debugfs. * @ep0_reply: Request used for ep0 reply. * @ep0_buff: Buffer for EP0 reply data, if needed. * @ctrl_buff: Buffer for EP0 control requests. @@ -939,7 +1025,37 @@ struct dwc2_hregs_backup { * @ctrl_in_desc: EP0 IN data phase desc chain pointer * @ctrl_out_desc_dma: EP0 OUT data phase desc chain DMA address * @ctrl_out_desc: EP0 OUT data phase desc chain pointer - * @eps: The endpoints being supplied to the gadget framework + * @irq: Interrupt request line number + * @clk: Pointer to otg clock + * @reset: Pointer to dwc2 reset controller + * @reset_ecc: Pointer to dwc2 optional reset controller in Stratix10. + * @regset: A pointer to a struct debugfs_regset32, which contains + * a pointer to an array of register definitions, the + * array size and the base address where the register bank + * is to be found. + * @bus_suspended: True if bus is suspended + * @last_frame_num: Number of last frame. Range from 0 to 32768 + * @frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is + * defined, for missed SOFs tracking. Array holds that + * frame numbers, which not equal to last_frame_num +1 + * @last_frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is + * defined, for missed SOFs tracking. + * If current_frame_number != last_frame_num+1 + * then last_frame_num added to this array + * @frame_num_idx: Actual size of frame_num_array and last_frame_num_array + * @dumped_frame_num_array: 1 - if missed SOFs frame numbers dumbed + * 0 - if missed SOFs frame numbers not dumbed + * @fifo_mem: Total internal RAM for FIFOs (bytes) + * @fifo_map: Each bit intend for concrete fifo. If that bit is set, + * then that fifo is used + * @gadget: Represents a usb slave device + * @connected: Used in slave mode. True if device connected with host + * @eps_in: The IN endpoints being supplied to the gadget framework + * @eps_out: The OUT endpoints being supplied to the gadget framework + * @new_connection: Used in host mode. True if there are new connected + * device + * @enabled: Indicates the enabling state of controller + * */ struct dwc2_hsotg { struct device *dev; @@ -954,6 +1070,7 @@ struct dwc2_hsotg { unsigned int gadget_enabled:1; unsigned int ll_hw_enabled:1; unsigned int hibernated:1; + u16 frame_number; struct phy *phy; struct usb_phy *uphy; @@ -1029,7 +1146,6 @@ struct dwc2_hsotg { u16 periodic_usecs; unsigned long hs_periodic_bitmap[ DIV_ROUND_UP(DWC2_HS_SCHEDULE_US, BITS_PER_LONG)]; - u16 frame_number; u16 periodic_qh_count; bool bus_suspended; bool new_connection; diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 2982a155734d..cc90b58b6b3c 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -778,6 +778,14 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev) goto out; } + /* Reading current frame number value in device or host modes. */ + if (dwc2_is_device_mode(hsotg)) + hsotg->frame_number = (dwc2_readl(hsotg->regs + DSTS) + & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT; + else + hsotg->frame_number = (dwc2_readl(hsotg->regs + HFNUM) + & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; + gintsts = dwc2_read_common_intr(hsotg); if (gintsts & ~GINTSTS_PRTINT) retval = IRQ_HANDLED; diff --git a/drivers/usb/dwc2/debug.h b/drivers/usb/dwc2/debug.h index 6f23219c13cb..a8c565b6bc34 100644 --- a/drivers/usb/dwc2/debug.h +++ b/drivers/usb/dwc2/debug.h @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * debug.h - Designware USB2 DRD controller debug header * * Copyright (C) 2015 Intel Corporation diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c index 58c691f882a8..d0bdb7997557 100644 --- a/drivers/usb/dwc2/debugfs.c +++ b/drivers/usb/dwc2/debugfs.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * debugfs.c - Designware USB2 DRD controller debugfs * * Copyright (C) 2015 Intel Corporation @@ -16,12 +16,13 @@ #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /** - * testmode_write - debugfs: change usb test mode - * @seq: The seq file to write to. - * @v: Unused parameter. - * - * This debugfs entry modify the current usb test mode. + * testmode_write() - change usb test mode state. + * @file: The file to write to. + * @ubuf: The buffer where user wrote. + * @count: The ubuf size. + * @ppos: Unused parameter. */ static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t count, loff_t *ppos) @@ -55,9 +56,9 @@ static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t } /** - * testmode_show - debugfs: show usb test mode state - * @seq: The seq file to write to. - * @v: Unused parameter. + * testmode_show() - debugfs: show usb test mode state + * @s: The seq file to write to. + * @unused: Unused parameter. * * This debugfs entry shows which usb test mode is currently enabled. */ @@ -293,52 +294,30 @@ DEFINE_SHOW_ATTRIBUTE(ep); static void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg) { struct dentry *root; - struct dentry *file; unsigned int epidx; root = hsotg->debug_root; /* create general state file */ - - file = debugfs_create_file("state", 0444, root, hsotg, &state_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create state\n", __func__); - - file = debugfs_create_file("testmode", 0644, root, hsotg, - &testmode_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create testmode\n", - __func__); - - file = debugfs_create_file("fifo", 0444, root, hsotg, &fifo_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__); + debugfs_create_file("state", 0444, root, hsotg, &state_fops); + debugfs_create_file("testmode", 0644, root, hsotg, &testmode_fops); + debugfs_create_file("fifo", 0444, root, hsotg, &fifo_fops); /* Create one file for each out endpoint */ for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { struct dwc2_hsotg_ep *ep; ep = hsotg->eps_out[epidx]; - if (ep) { - file = debugfs_create_file(ep->name, 0444, - root, ep, &ep_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "failed to create %s debug file\n", - ep->name); - } + if (ep) + debugfs_create_file(ep->name, 0444, root, ep, &ep_fops); } /* Create one file for each in endpoint. EP0 is handled with out eps */ for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) { struct dwc2_hsotg_ep *ep; ep = hsotg->eps_in[epidx]; - if (ep) { - file = debugfs_create_file(ep->name, 0444, - root, ep, &ep_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "failed to create %s debug file\n", - ep->name); - } + if (ep) + debugfs_create_file(ep->name, 0444, root, ep, &ep_fops); } } #else @@ -368,7 +347,7 @@ static const struct debugfs_reg32 dwc2_regs[] = { dump_register(GINTSTS), dump_register(GINTMSK), dump_register(GRXSTSR), - dump_register(GRXSTSP), + /* Omit GRXSTSP */ dump_register(GRXFSIZ), dump_register(GNPTXFSIZ), dump_register(GNPTXSTS), @@ -710,6 +689,7 @@ static int params_show(struct seq_file *seq, void *v) print_param(seq, p, phy_ulpi_ddr); print_param(seq, p, phy_ulpi_ext_vbus); print_param(seq, p, i2c_enable); + print_param(seq, p, ipg_isoc_en); print_param(seq, p, ulpi_fs_ls); print_param(seq, p, host_support_fs_ls_low_power); print_param(seq, p, host_ls_low_power_phy_clk); @@ -790,32 +770,14 @@ DEFINE_SHOW_ATTRIBUTE(dr_mode); int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) { int ret; - struct dentry *file; + struct dentry *root; - hsotg->debug_root = debugfs_create_dir(dev_name(hsotg->dev), NULL); - if (!hsotg->debug_root) { - ret = -ENOMEM; - goto err0; - } + root = debugfs_create_dir(dev_name(hsotg->dev), NULL); + hsotg->debug_root = root; - file = debugfs_create_file("params", 0444, - hsotg->debug_root, - hsotg, ¶ms_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create params\n", __func__); - - file = debugfs_create_file("hw_params", 0444, - hsotg->debug_root, - hsotg, &hw_params_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create hw_params\n", - __func__); - - file = debugfs_create_file("dr_mode", 0444, - hsotg->debug_root, - hsotg, &dr_mode_fops); - if (IS_ERR(file)) - dev_err(hsotg->dev, "%s: failed to create dr_mode\n", __func__); + debugfs_create_file("params", 0444, root, hsotg, ¶ms_fops); + debugfs_create_file("hw_params", 0444, root, hsotg, &hw_params_fops); + debugfs_create_file("dr_mode", 0444, root, hsotg, &dr_mode_fops); /* Add gadget debugfs nodes */ dwc2_hsotg_create_debug(hsotg); @@ -824,24 +786,18 @@ int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) GFP_KERNEL); if (!hsotg->regset) { ret = -ENOMEM; - goto err1; + goto err; } hsotg->regset->regs = dwc2_regs; hsotg->regset->nregs = ARRAY_SIZE(dwc2_regs); hsotg->regset->base = hsotg->regs; - file = debugfs_create_regset32("regdump", 0444, hsotg->debug_root, - hsotg->regset); - if (!file) { - ret = -ENOMEM; - goto err1; - } + debugfs_create_regset32("regdump", 0444, root, hsotg->regset); return 0; -err1: +err: debugfs_remove_recursive(hsotg->debug_root); -err0: return ret; } diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 83cb5577a52f..f0d9ccf1d665 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * Copyright (c) 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * @@ -107,7 +107,6 @@ static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) /** * dwc2_gadget_incr_frame_num - Increments the targeted frame number. * @hs_ep: The endpoint - * @increment: The value to increment by * * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT. * If an overrun occurs it will wrap the value and set the frame_overrun flag. @@ -190,6 +189,8 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg, /** * dwc2_hsotg_tx_fifo_count - return count of TX FIFOs in device mode + * + * @hsotg: Programming view of the DWC_otg controller */ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) { @@ -204,6 +205,8 @@ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for * device mode TX FIFOs + * + * @hsotg: Programming view of the DWC_otg controller */ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) { @@ -227,6 +230,8 @@ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_tx_fifo_average_depth - returns average depth of device mode * TX FIFOs + * + * @hsotg: Programming view of the DWC_otg controller */ int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg) { @@ -327,6 +332,7 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg) } /** + * dwc2_hsotg_ep_alloc_request - allocate USB rerequest structure * @ep: USB endpoint to allocate request for. * @flags: Allocation flags * @@ -793,9 +799,7 @@ static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep, * @dma_buff: usb requests dma buffer. * @len: usb request transfer length. * - * Finds out index of first free entry either in the bottom or up half of - * descriptor chain depend on which is under SW control and not processed - * by HW. Then fills that descriptor with the data of the arrived usb request, + * Fills next free descriptor with the data of the arrived usb request, * frame info, sets Last and IOC bits increments next_desc. If filled * descriptor is not the first one, removes L bit from the previous descriptor * status. @@ -810,34 +814,17 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, u32 mask = 0; maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); - if (len > maxsize) { - dev_err(hsotg->dev, "wrong len %d\n", len); - return -EINVAL; - } - - /* - * If SW has already filled half of chain, then return and wait for - * the other chain to be processed by HW. - */ - if (hs_ep->next_desc == MAX_DMA_DESC_NUM_GENERIC / 2) - return -EBUSY; - - /* Increment frame number by interval for IN */ - if (hs_ep->dir_in) - dwc2_gadget_incr_frame_num(hs_ep); - index = (MAX_DMA_DESC_NUM_GENERIC / 2) * hs_ep->isoc_chain_num + - hs_ep->next_desc; + index = hs_ep->next_desc; + desc = &hs_ep->desc_list[index]; - /* Sanity check of calculated index */ - if ((hs_ep->isoc_chain_num && index > MAX_DMA_DESC_NUM_GENERIC) || - (!hs_ep->isoc_chain_num && index > MAX_DMA_DESC_NUM_GENERIC / 2)) { - dev_err(hsotg->dev, "wrong index %d for iso chain\n", index); - return -EINVAL; + /* Check if descriptor chain full */ + if ((desc->status >> DEV_DMA_BUFF_STS_SHIFT) == + DEV_DMA_BUFF_STS_HREADY) { + dev_dbg(hsotg->dev, "%s: desc chain full\n", __func__); + return 1; } - desc = &hs_ep->desc_list[index]; - /* Clear L bit of previous desc if more than one entries in the chain */ if (hs_ep->next_desc) hs_ep->desc_list[index - 1].status &= ~DEV_DMA_L; @@ -865,8 +852,14 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, desc->status &= ~DEV_DMA_BUFF_STS_MASK; desc->status |= (DEV_DMA_BUFF_STS_HREADY << DEV_DMA_BUFF_STS_SHIFT); + /* Increment frame number by interval for IN */ + if (hs_ep->dir_in) + dwc2_gadget_incr_frame_num(hs_ep); + /* Update index of last configured entry in the chain */ hs_ep->next_desc++; + if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_GENERIC) + hs_ep->next_desc = 0; return 0; } @@ -875,11 +868,8 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, * dwc2_gadget_start_isoc_ddma - start isochronous transfer in DDMA * @hs_ep: The isochronous endpoint. * - * Prepare first descriptor chain for isochronous endpoints. Afterwards + * Prepare descriptor chain for isochronous endpoints. Afterwards * write DMA address to HW and enable the endpoint. - * - * Switch between descriptor chains via isoc_chain_num to give SW opportunity - * to prepare second descriptor chain while first one is being processed by HW. */ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) { @@ -887,24 +877,34 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) struct dwc2_hsotg_req *hs_req, *treq; int index = hs_ep->index; int ret; + int i; u32 dma_reg; u32 depctl; u32 ctrl; + struct dwc2_dma_desc *desc; if (list_empty(&hs_ep->queue)) { dev_dbg(hsotg->dev, "%s: No requests in queue\n", __func__); return; } + /* Initialize descriptor chain by Host Busy status */ + for (i = 0; i < MAX_DMA_DESC_NUM_GENERIC; i++) { + desc = &hs_ep->desc_list[i]; + desc->status = 0; + desc->status |= (DEV_DMA_BUFF_STS_HBUSY + << DEV_DMA_BUFF_STS_SHIFT); + } + + hs_ep->next_desc = 0; list_for_each_entry_safe(hs_req, treq, &hs_ep->queue, queue) { ret = dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma, hs_req->req.length); - if (ret) { - dev_dbg(hsotg->dev, "%s: desc chain full\n", __func__); + if (ret) break; - } } + hs_ep->compl_desc = 0; depctl = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); dma_reg = hs_ep->dir_in ? DIEPDMA(index) : DOEPDMA(index); @@ -914,10 +914,6 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) ctrl = dwc2_readl(hsotg->regs + depctl); ctrl |= DXEPCTL_EPENA | DXEPCTL_CNAK; dwc2_writel(ctrl, hsotg->regs + depctl); - - /* Switch ISOC descriptor chain number being processed by SW*/ - hs_ep->isoc_chain_num = (hs_ep->isoc_chain_num ^ 1) & 0x1; - hs_ep->next_desc = 0; } /** @@ -1235,7 +1231,7 @@ static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; u32 target_frame = hs_ep->target_frame; - u32 current_frame = dwc2_hsotg_read_frameno(hsotg); + u32 current_frame = hsotg->frame_number; bool frame_overrun = hs_ep->frame_overrun; if (!frame_overrun && current_frame >= target_frame) @@ -1291,6 +1287,9 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, struct dwc2_hsotg *hs = hs_ep->parent; bool first; int ret; + u32 maxsize = 0; + u32 mask = 0; + dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", ep->name, req, req->length, req->buf, req->no_interrupt, @@ -1308,6 +1307,24 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, req->actual = 0; req->status = -EINPROGRESS; + /* In DDMA mode for ISOC's don't queue request if length greater + * than descriptor limits. + */ + if (using_desc_dma(hs) && hs_ep->isochronous) { + maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); + if (hs_ep->dir_in && req->length > maxsize) { + dev_err(hs->dev, "wrong length %d (maxsize=%d)\n", + req->length, maxsize); + return -EINVAL; + } + + if (!hs_ep->dir_in && req->length > hs_ep->ep.maxpacket) { + dev_err(hs->dev, "ISOC OUT: wrong length %d (mps=%d)\n", + req->length, hs_ep->ep.maxpacket); + return -EINVAL; + } + } + ret = dwc2_hsotg_handle_unaligned_buf_start(hs, hs_ep, hs_req); if (ret) return ret; @@ -1330,17 +1347,15 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, /* * Handle DDMA isochronous transfers separately - just add new entry - * to the half of descriptor chain that is not processed by HW. + * to the descriptor chain. * Transfer will be started once SW gets either one of NAK or * OutTknEpDis interrupts. */ - if (using_desc_dma(hs) && hs_ep->isochronous && - hs_ep->target_frame != TARGET_FRAME_INITIAL) { - ret = dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma, - hs_req->req.length); - if (ret) - dev_dbg(hs->dev, "%s: ISO desc chain full\n", __func__); - + if (using_desc_dma(hs) && hs_ep->isochronous) { + if (hs_ep->target_frame != TARGET_FRAME_INITIAL) { + dwc2_gadget_fill_isoc_desc(hs_ep, hs_req->req.dma, + hs_req->req.length); + } return 0; } @@ -1350,8 +1365,15 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, return 0; } - while (dwc2_gadget_target_frame_elapsed(hs_ep)) + /* Update current frame number value. */ + hs->frame_number = dwc2_hsotg_read_frameno(hs); + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value once more as it + * changes here. + */ + hs->frame_number = dwc2_hsotg_read_frameno(hs); + } if (hs_ep->target_frame != TARGET_FRAME_INITIAL) dwc2_hsotg_start_req(hs, hs_ep, hs_req, false); @@ -2011,108 +2033,75 @@ static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, * @hs_ep: The endpoint the request was on. * * Get first request from the ep queue, determine descriptor on which complete - * happened. SW based on isoc_chain_num discovers which half of the descriptor - * chain is currently in use by HW, adjusts dma_address and calculates index - * of completed descriptor based on the value of DEPDMA register. Update actual - * length of request, giveback to gadget. + * happened. SW discovers which descriptor currently in use by HW, adjusts + * dma_address and calculates index of completed descriptor based on the value + * of DEPDMA register. Update actual length of request, giveback to gadget. */ static void dwc2_gadget_complete_isoc_request_ddma(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; struct dwc2_hsotg_req *hs_req; struct usb_request *ureq; - int index; - dma_addr_t dma_addr; - u32 dma_reg; - u32 depdma; u32 desc_sts; u32 mask; - hs_req = get_ep_head(hs_ep); - if (!hs_req) { - dev_warn(hsotg->dev, "%s: ISOC EP queue empty\n", __func__); - return; - } - ureq = &hs_req->req; - - dma_addr = hs_ep->desc_list_dma; - - /* - * If lower half of descriptor chain is currently use by SW, - * that means higher half is being processed by HW, so shift - * DMA address to higher half of descriptor chain. - */ - if (!hs_ep->isoc_chain_num) - dma_addr += sizeof(struct dwc2_dma_desc) * - (MAX_DMA_DESC_NUM_GENERIC / 2); - - dma_reg = hs_ep->dir_in ? DIEPDMA(hs_ep->index) : DOEPDMA(hs_ep->index); - depdma = dwc2_readl(hsotg->regs + dma_reg); + desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status; - index = (depdma - dma_addr) / sizeof(struct dwc2_dma_desc) - 1; - desc_sts = hs_ep->desc_list[index].status; + /* Process only descriptors with buffer status set to DMA done */ + while ((desc_sts & DEV_DMA_BUFF_STS_MASK) >> + DEV_DMA_BUFF_STS_SHIFT == DEV_DMA_BUFF_STS_DMADONE) { - mask = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_MASK : - DEV_DMA_ISOC_RX_NBYTES_MASK; - ureq->actual = ureq->length - - ((desc_sts & mask) >> DEV_DMA_ISOC_NBYTES_SHIFT); + hs_req = get_ep_head(hs_ep); + if (!hs_req) { + dev_warn(hsotg->dev, "%s: ISOC EP queue empty\n", __func__); + return; + } + ureq = &hs_req->req; + + /* Check completion status */ + if ((desc_sts & DEV_DMA_STS_MASK) >> DEV_DMA_STS_SHIFT == + DEV_DMA_STS_SUCC) { + mask = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_MASK : + DEV_DMA_ISOC_RX_NBYTES_MASK; + ureq->actual = ureq->length - ((desc_sts & mask) >> + DEV_DMA_ISOC_NBYTES_SHIFT); + + /* Adjust actual len for ISOC Out if len is + * not align of 4 + */ + if (!hs_ep->dir_in && ureq->length & 0x3) + ureq->actual += 4 - (ureq->length & 0x3); + } - /* Adjust actual length for ISOC Out if length is not align of 4 */ - if (!hs_ep->dir_in && ureq->length & 0x3) - ureq->actual += 4 - (ureq->length & 0x3); + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); - dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); + hs_ep->compl_desc++; + if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_GENERIC - 1)) + hs_ep->compl_desc = 0; + desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status; + } } /* - * dwc2_gadget_start_next_isoc_ddma - start next isoc request, if any. - * @hs_ep: The isochronous endpoint to be re-enabled. + * dwc2_gadget_handle_isoc_bna - handle BNA interrupt for ISOC. + * @hs_ep: The isochronous endpoint. * - * If ep has been disabled due to last descriptor servicing (IN endpoint) or - * BNA (OUT endpoint) check the status of other half of descriptor chain that - * was under SW control till HW was busy and restart the endpoint if needed. + * If EP ISOC OUT then need to flush RX FIFO to remove source of BNA + * interrupt. Reset target frame and next_desc to allow to start + * ISOC's on NAK interrupt for IN direction or on OUTTKNEPDIS + * interrupt for OUT direction. */ -static void dwc2_gadget_start_next_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) +static void dwc2_gadget_handle_isoc_bna(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; - u32 depctl; - u32 dma_reg; - u32 ctrl; - u32 dma_addr = hs_ep->desc_list_dma; - unsigned char index = hs_ep->index; - - dma_reg = hs_ep->dir_in ? DIEPDMA(index) : DOEPDMA(index); - depctl = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); - ctrl = dwc2_readl(hsotg->regs + depctl); - - /* - * EP was disabled if HW has processed last descriptor or BNA was set. - * So restart ep if SW has prepared new descriptor chain in ep_queue - * routine while HW was busy. - */ - if (!(ctrl & DXEPCTL_EPENA)) { - if (!hs_ep->next_desc) { - dev_dbg(hsotg->dev, "%s: No more ISOC requests\n", - __func__); - return; - } - - dma_addr += sizeof(struct dwc2_dma_desc) * - (MAX_DMA_DESC_NUM_GENERIC / 2) * - hs_ep->isoc_chain_num; - dwc2_writel(dma_addr, hsotg->regs + dma_reg); - - ctrl |= DXEPCTL_EPENA | DXEPCTL_CNAK; - dwc2_writel(ctrl, hsotg->regs + depctl); + if (!hs_ep->dir_in) + dwc2_flush_rx_fifo(hsotg); + dwc2_hsotg_complete_request(hsotg, hs_ep, get_ep_head(hs_ep), 0); - /* Switch ISOC descriptor chain number being processed by SW*/ - hs_ep->isoc_chain_num = (hs_ep->isoc_chain_num ^ 1) & 0x1; - hs_ep->next_desc = 0; - - dev_dbg(hsotg->dev, "%s: Restarted isochronous endpoint\n", - __func__); - } + hs_ep->target_frame = TARGET_FRAME_INITIAL; + hs_ep->next_desc = 0; + hs_ep->compl_desc = 0; } /** @@ -2441,6 +2430,7 @@ static u32 dwc2_hsotg_ep0_mps(unsigned int mps) * @ep: The index number of the endpoint * @mps: The maximum packet size in bytes * @mc: The multicount value + * @dir_in: True if direction is in. * * Configure the maximum packet size for the given endpoint, updating * the hardware control registers to reflect this. @@ -2731,6 +2721,8 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); } while (dwc2_gadget_target_frame_elapsed(hs_ep)); dwc2_gadget_start_next_request(hs_ep); @@ -2738,7 +2730,7 @@ static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) /** * dwc2_gadget_handle_out_token_ep_disabled - handle DXEPINT_OUTTKNEPDIS - * @hs_ep: The endpoint on which interrupt is asserted. + * @ep: The endpoint on which interrupt is asserted. * * This is starting point for ISOC-OUT transfer, synchronization done with * first out token received from host while corresponding EP is disabled. @@ -2763,7 +2755,7 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) */ tmp = dwc2_hsotg_read_frameno(hsotg); - dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), -ENODATA); + dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), 0); if (using_desc_dma(hsotg)) { if (ep->target_frame == TARGET_FRAME_INITIAL) { @@ -2816,18 +2808,25 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) { struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; + u32 tmp; if (!dir_in || !hs_ep->isochronous) return; if (hs_ep->target_frame == TARGET_FRAME_INITIAL) { - hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg); + tmp = dwc2_hsotg_read_frameno(hsotg); if (using_desc_dma(hsotg)) { + dwc2_hsotg_complete_request(hsotg, hs_ep, + get_ep_head(hs_ep), 0); + + hs_ep->target_frame = tmp; + dwc2_gadget_incr_frame_num(hs_ep); dwc2_gadget_start_isoc_ddma(hs_ep); return; } + hs_ep->target_frame = tmp; if (hs_ep->interval > 1) { u32 ctrl = dwc2_readl(hsotg->regs + DIEPCTL(hs_ep->index)); @@ -2843,7 +2842,8 @@ static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) get_ep_head(hs_ep), 0); } - dwc2_gadget_incr_frame_num(hs_ep); + if (!using_desc_dma(hsotg)) + dwc2_gadget_incr_frame_num(hs_ep); } /** @@ -2901,9 +2901,9 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, /* In DDMA handle isochronous requests separately */ if (using_desc_dma(hsotg) && hs_ep->isochronous) { - dwc2_gadget_complete_isoc_request_ddma(hs_ep); - /* Try to start next isoc request */ - dwc2_gadget_start_next_isoc_ddma(hs_ep); + /* XferCompl set along with BNA */ + if (!(ints & DXEPINT_BNAINTR)) + dwc2_gadget_complete_isoc_request_ddma(hs_ep); } else if (dir_in) { /* * We get OutDone from the FIFO, so we only @@ -2978,15 +2978,8 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, if (ints & DXEPINT_BNAINTR) { dev_dbg(hsotg->dev, "%s: BNA interrupt\n", __func__); - - /* - * Try to start next isoc request, if any. - * Sometimes the endpoint remains enabled after BNA interrupt - * assertion, which is not expected, hence we can enter here - * couple of times. - */ if (hs_ep->isochronous) - dwc2_gadget_start_next_isoc_ddma(hs_ep); + dwc2_gadget_handle_isoc_bna(hs_ep); } if (dir_in && !hs_ep->isochronous) { @@ -3197,6 +3190,7 @@ static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) /** * dwc2_hsotg_core_init - issue softreset to the core * @hsotg: The device state + * @is_usb_reset: Usb resetting flag * * Issue a soft reset to the core, and await the core finishing it. */ @@ -3259,6 +3253,9 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, dcfg |= DCFG_DEVSPD_HS; } + if (hsotg->params.ipg_isoc_en) + dcfg |= DCFG_IPG_ISOC_SUPPORDED; + dwc2_writel(dcfg, hsotg->regs + DCFG); /* Clear any pending OTG interrupts */ @@ -3320,8 +3317,10 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, hsotg->regs + DOEPMSK); /* Enable BNA interrupt for DDMA */ - if (using_desc_dma(hsotg)) + if (using_desc_dma(hsotg)) { dwc2_set_bit(hsotg->regs + DOEPMSK, DOEPMSK_BNAMSK); + dwc2_set_bit(hsotg->regs + DIEPMSK, DIEPMSK_BNAININTRMSK); + } dwc2_writel(0, hsotg->regs + DAINTMSK); @@ -3427,7 +3426,7 @@ static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg) daintmsk = dwc2_readl(hsotg->regs + DAINTMSK); - for (idx = 1; idx <= hsotg->num_of_eps; idx++) { + for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_in[idx]; /* Proceed only unmasked ISOC EPs */ if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) @@ -3473,7 +3472,7 @@ static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg) daintmsk = dwc2_readl(hsotg->regs + DAINTMSK); daintmsk >>= DAINT_OUTEP_SHIFT; - for (idx = 1; idx <= hsotg->num_of_eps; idx++) { + for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) @@ -3647,7 +3646,7 @@ irq_retry: dwc2_writel(gintmsk, hsotg->regs + GINTMSK); dev_dbg(hsotg->dev, "GOUTNakEff triggered\n"); - for (idx = 1; idx <= hsotg->num_of_eps; idx++) { + for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) @@ -3789,6 +3788,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, unsigned int dir_in; unsigned int i, val, size; int ret = 0; + unsigned char ep_type; dev_dbg(hsotg->dev, "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", @@ -3807,9 +3807,26 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, return -EINVAL; } + ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; mps = usb_endpoint_maxp(desc); mc = usb_endpoint_maxp_mult(desc); + /* ISOC IN in DDMA supported bInterval up to 10 */ + if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC && + dir_in && desc->bInterval > 10) { + dev_err(hsotg->dev, + "%s: ISOC IN, DDMA: bInterval>10 not supported!\n", __func__); + return -EINVAL; + } + + /* High bandwidth ISOC OUT in DDMA not supported */ + if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC && + !dir_in && mc > 1) { + dev_err(hsotg->dev, + "%s: ISOC OUT, DDMA: HB not supported!\n", __func__); + return -EINVAL; + } + /* note, we handle this here instead of dwc2_hsotg_set_ep_maxpacket */ epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); @@ -3850,15 +3867,15 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, hs_ep->halted = 0; hs_ep->interval = desc->bInterval; - switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (ep_type) { case USB_ENDPOINT_XFER_ISOC: epctrl |= DXEPCTL_EPTYPE_ISO; epctrl |= DXEPCTL_SETEVENFR; hs_ep->isochronous = 1; hs_ep->interval = 1 << (desc->bInterval - 1); hs_ep->target_frame = TARGET_FRAME_INITIAL; - hs_ep->isoc_chain_num = 0; hs_ep->next_desc = 0; + hs_ep->compl_desc = 0; if (dir_in) { hs_ep->periodic = 1; mask = dwc2_readl(hsotg->regs + DIEPMSK); @@ -4301,7 +4318,6 @@ err: /** * dwc2_hsotg_udc_stop - stop the udc * @gadget: The usb gadget state - * @driver: The usb gadget driver * * Stop udc hw block and stay tunned for future transmissions */ @@ -4453,6 +4469,7 @@ static const struct usb_gadget_ops dwc2_hsotg_gadget_ops = { * @hsotg: The device state. * @hs_ep: The endpoint to be initialised. * @epnum: The endpoint number + * @dir_in: True if direction is in. * * Initialise the given endpoint (as part of the probe and device state * creation) to give to the gadget driver. Setup the endpoint name, any @@ -4526,7 +4543,7 @@ static void dwc2_hsotg_initep(struct dwc2_hsotg *hsotg, /** * dwc2_hsotg_hw_cfg - read HW configuration registers - * @param: The device state + * @hsotg: Programming view of the DWC_otg controller * * Read the USB core HW configuration registers */ @@ -4582,7 +4599,8 @@ static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_dump - dump state of the udc - * @param: The device state + * @hsotg: Programming view of the DWC_otg controller + * */ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg) { @@ -4633,7 +4651,8 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg) /** * dwc2_gadget_init - init function for gadget - * @dwc2: The data structure for the DWC2 driver. + * @hsotg: Programming view of the DWC_otg controller + * */ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) { @@ -4730,7 +4749,8 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) /** * dwc2_hsotg_remove - remove function for hsotg driver - * @pdev: The platform information for the driver + * @hsotg: Programming view of the DWC_otg controller + * */ int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg) { @@ -5011,7 +5031,7 @@ int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg) * * @hsotg: Programming view of the DWC_otg controller * @rem_wakeup: indicates whether resume is initiated by Device or Host. - * @param reset: indicates whether resume is initiated by Reset. + * @reset: indicates whether resume is initiated by Reset. * * Return non-zero if failed to exit from hibernation. */ diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index c51b73b3e048..1faefea16cec 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -597,7 +597,7 @@ u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination * buffer * - * @core_if: Programming view of DWC_otg controller + * @hsotg: Programming view of DWC_otg controller * @dest: Destination buffer for the packet * @bytes: Number of bytes to copy to the destination */ @@ -4087,7 +4087,6 @@ static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) * then the refcount for the structure will go to 0 and we'll free it. * * @hsotg: The HCD state structure for the DWC OTG controller. - * @qh: The QH structure. * @context: The priv pointer from a struct dwc2_hcd_urb. * @mem_flags: Flags for allocating memory. * @ttport: We'll return this device's port number here. That's used to diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 96a9da5fb202..7db1ee7e7a77 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -80,7 +80,7 @@ struct dwc2_qh; * @xfer_count: Number of bytes transferred so far * @start_pkt_count: Packet count at start of transfer * @xfer_started: True if the transfer has been started - * @ping: True if a PING request should be issued on this channel + * @do_ping: True if a PING request should be issued on this channel * @error_state: True if the error count for this transaction is non-zero * @halt_on_queue: True if this channel should be halted the next time a * request is queued for the channel. This is necessary in @@ -102,7 +102,7 @@ struct dwc2_qh; * @schinfo: Scheduling micro-frame bitmap * @ntd: Number of transfer descriptors for the transfer * @halt_status: Reason for halting the host channel - * @hcint Contents of the HCINT register when the interrupt came + * @hcint: Contents of the HCINT register when the interrupt came * @qh: QH for the transfer being processed by this channel * @hc_list_entry: For linking to list of host channels * @desc_list_addr: Current QH's descriptor list DMA address @@ -237,7 +237,7 @@ struct dwc2_tt { /** * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus. * - * @start_schedule_usecs: The start time on the main bus schedule. Note that + * @start_schedule_us: The start time on the main bus schedule. Note that * the main bus schedule is tightly packed and this * time should be interpreted as tightly packed (so * uFrame 0 starts at 0 us, uFrame 1 starts at 100 us @@ -301,7 +301,6 @@ struct dwc2_hs_transfer_time { * "struct dwc2_tt". Not used if this device is high * speed. Note that this is in "schedule slice" which * is tightly packed. - * @ls_duration_us: Duration on the low speed bus schedule. * @ntd: Actual number of transfer descriptors in a list * @qtd_list: List of QTDs for this QH * @channel: Host channel currently processing transfers for this QH @@ -315,7 +314,7 @@ struct dwc2_hs_transfer_time { * descriptor * @unreserve_timer: Timer for releasing periodic reservation. * @wait_timer: Timer used to wait before re-queuing. - * @dwc2_tt: Pointer to our tt info (or NULL if no tt). + * @dwc_tt: Pointer to our tt info (or NULL if no tt). * @ttport: Port number within our tt. * @tt_buffer_dirty True if clear_tt_buffer_complete is pending * @unreserve_pending: True if we planned to unreserve but haven't yet. @@ -325,6 +324,7 @@ struct dwc2_hs_transfer_time { * periodic transfers and is ignored for periodic ones. * @wait_timer_cancel: Set to true to cancel the wait_timer. * + * @tt_buffer_dirty: True if EP's TT buffer is not clean. * A Queue Head (QH) holds the static characteristics of an endpoint and * maintains a list of transfers (QTDs) for that endpoint. A QH structure may * be entered in either the non-periodic or periodic schedule. @@ -400,6 +400,10 @@ struct dwc2_qh { * @urb: URB for this transfer * @qh: Queue head for this QTD * @qtd_list_entry: For linking to the QH's list of QTDs + * @isoc_td_first: Index of first activated isochronous transfer + * descriptor in Descriptor DMA mode + * @isoc_td_last: Index of last activated isochronous transfer + * descriptor in Descriptor DMA mode * * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, * interrupt, or isochronous transfer. A single QTD is created for each URB diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index 28c8898b3b66..74f11c823f79 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -332,6 +332,7 @@ static void dwc2_release_channel_ddma(struct dwc2_hsotg *hsotg, * * @hsotg: The HCD state structure for the DWC OTG controller * @qh: The QH to init + * @mem_flags: Indicates the type of memory allocation * * Return: 0 if successful, negative error code otherwise * diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index a5dfd9d8bd9a..fbea5e3fb947 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -478,6 +478,12 @@ static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg, * of the URB based on the number of bytes transferred via the host channel. * Sets the URB status if the data transfer is finished. * + * @hsotg: Programming view of the DWC_otg controller + * @chan: Programming view of host channel + * @chnum: Channel number + * @urb: Processing URB + * @qtd: Queue transfer descriptor + * * Return: 1 if the data transfer specified by the URB is completely finished, * 0 otherwise */ @@ -566,6 +572,12 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, * halt_status. Completes the Isochronous URB if all the URB frames have been * completed. * + * @hsotg: Programming view of the DWC_otg controller + * @chan: Programming view of host channel + * @chnum: Channel number + * @halt_status: Reason for halting a host channel + * @qtd: Queue transfer descriptor + * * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE. */ diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index e34ad5e65350..d7c3d6c776d8 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -679,6 +679,7 @@ static int dwc2_hs_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, * * @hsotg: The HCD state structure for the DWC OTG controller. * @qh: QH for the periodic transfer. + * @index: Transfer index */ static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, int index) @@ -1276,7 +1277,7 @@ static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) * release the reservation. This worker is called after the appropriate * delay. * - * @work: Pointer to a qh unreserve_work. + * @t: Address to a qh unreserve_work. */ static void dwc2_unreserve_timer_fn(struct timer_list *t) { @@ -1631,7 +1632,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, * @hsotg: The HCD state structure for the DWC OTG controller * @urb: Holds the information about the device/endpoint needed * to initialize the QH - * @atomic_alloc: Flag to do atomic allocation if needed + * @mem_flags: Flags for allocating memory. * * Return: Pointer to the newly allocated QH, or NULL on error */ diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 38391e48351f..0ca8e7bc7aaf 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -311,6 +311,7 @@ #define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) #define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 #define GHWCFG4_ACG_SUPPORTED BIT(12) +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11) #define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 #define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 #define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 @@ -424,6 +425,7 @@ #define DCFG_EPMISCNT_SHIFT 18 #define DCFG_EPMISCNT_LIMIT 0x1f #define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_IPG_ISOC_SUPPORDED BIT(17) #define DCFG_PERFRINT_MASK (0x3 << 11) #define DCFG_PERFRINT_SHIFT 11 #define DCFG_PERFRINT_LIMIT 0x3 diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index f03e41879224..af075d4da895 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -70,6 +70,7 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) GAHBCFG_HBSTLEN_SHIFT; p->uframe_sched = false; p->change_speed_quirk = true; + p->power_down = false; } static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) @@ -269,6 +270,9 @@ static void dwc2_set_param_power_down(struct dwc2_hsotg *hsotg) /** * dwc2_set_default_params() - Set all core parameters to their * auto-detected default values. + * + * @hsotg: Programming view of the DWC_otg controller + * */ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) { @@ -298,6 +302,7 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) p->besl = true; p->hird_threshold_en = true; p->hird_threshold = 4; + p->ipg_isoc_en = false; p->max_packet_count = hw->max_packet_count; p->max_transfer_size = hw->max_transfer_size; p->ahbcfg = GAHBCFG_HBSTLEN_INCR << GAHBCFG_HBSTLEN_SHIFT; @@ -338,6 +343,8 @@ static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) /** * dwc2_get_device_properties() - Read in device properties. * + * @hsotg: Programming view of the DWC_otg controller + * * Read in the device properties and adjust core parameters if needed. */ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg) @@ -549,7 +556,7 @@ static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) } #define CHECK_RANGE(_param, _min, _max, _def) do { \ - if ((hsotg->params._param) < (_min) || \ + if ((int)(hsotg->params._param) < (_min) || \ (hsotg->params._param) > (_max)) { \ dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \ __func__, #_param, hsotg->params._param); \ @@ -579,6 +586,7 @@ static void dwc2_check_params(struct dwc2_hsotg *hsotg) CHECK_BOOL(enable_dynamic_fifo, hw->enable_dynamic_fifo); CHECK_BOOL(en_multiple_tx_fifo, hw->en_multiple_tx_fifo); CHECK_BOOL(i2c_enable, hw->i2c_enable); + CHECK_BOOL(ipg_isoc_en, hw->ipg_isoc_en); CHECK_BOOL(acg_enable, hw->acg_enable); CHECK_BOOL(reload_ctl, (hsotg->hw_params.snpsid > DWC2_CORE_REV_2_92a)); CHECK_BOOL(lpm, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_80a)); @@ -688,6 +696,9 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) /** * During device initialization, read various hardware configuration * registers and interpret the contents. + * + * @hsotg: Programming view of the DWC_otg controller + * */ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) { @@ -772,6 +783,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >> GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT; hw->acg_enable = !!(hwcfg4 & GHWCFG4_ACG_SUPPORTED); + hw->ipg_isoc_en = !!(hwcfg4 & GHWCFG4_IPG_ISOC_SUPPORTED); /* fifo sizes */ hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index bea2e8ec0369..d257c541e51b 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -77,6 +77,12 @@ static int dwc2_pci_quirks(struct pci_dev *pdev, struct platform_device *dwc2) return 0; } +/** + * dwc2_pci_probe() - Provides the cleanup entry points for the DWC_otg PCI + * driver + * + * @pci: The programming view of DWC_otg PCI + */ static void dwc2_pci_remove(struct pci_dev *pci) { struct dwc2_pci_glue *glue = pci_get_drvdata(pci); diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index ab8c0e0d3b60..451012ea1294 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -106,4 +106,16 @@ config USB_DWC3_ST inside (i.e. STiH407). Say 'Y' or 'M' if you have one such device. +config USB_DWC3_QCOM + tristate "Qualcomm Platform" + depends on ARCH_QCOM || COMPILE_TEST + depends on OF + default USB_DWC3 + help + Some Qualcomm SoCs use DesignWare Core IP for USB2/3 + functionality. + This driver also handles Qscratch wrapper which is needed + for peripheral mode support. + Say 'Y' or 'M' if you have one such device. + endif diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 025bc68094fc..5c07d8f925e0 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -48,3 +48,4 @@ obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o +obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a15648d25e30..ea91310113b9 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -8,6 +8,7 @@ * Sebastian Andrzej Siewior <bigeasy@linutronix.de> */ +#include <linux/clk.h> #include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> @@ -24,6 +25,7 @@ #include <linux/of.h> #include <linux/acpi.h> #include <linux/pinctrl/consumer.h> +#include <linux/reset.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -266,6 +268,12 @@ done: return 0; } +static const struct clk_bulk_data dwc3_core_clks[] = { + { .id = "ref" }, + { .id = "bus_early" }, + { .id = "suspend" }, +}; + /* * dwc3_frame_length_adjustment - Adjusts frame length if required * @dwc3: Pointer to our controller context structure @@ -667,6 +675,9 @@ static void dwc3_core_exit(struct dwc3 *dwc) usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); + clk_bulk_disable(dwc->num_clks, dwc->clks); + clk_bulk_unprepare(dwc->num_clks, dwc->clks); + reset_control_assert(dwc->reset); } static bool dwc3_core_is_valid(struct dwc3 *dwc) @@ -1245,7 +1256,7 @@ static void dwc3_check_params(struct dwc3 *dwc) static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; + struct resource *res, dwc_res; struct dwc3 *dwc; int ret; @@ -1256,6 +1267,12 @@ static int dwc3_probe(struct platform_device *pdev) if (!dwc) return -ENOMEM; + dwc->clks = devm_kmemdup(dev, dwc3_core_clks, sizeof(dwc3_core_clks), + GFP_KERNEL); + if (!dwc->clks) + return -ENOMEM; + + dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); dwc->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1270,23 +1287,48 @@ static int dwc3_probe(struct platform_device *pdev) dwc->xhci_resources[0].flags = res->flags; dwc->xhci_resources[0].name = res->name; - res->start += DWC3_GLOBALS_REGS_START; - /* * Request memory region but exclude xHCI regs, * since it will be requested by the xhci-plat driver. */ - regs = devm_ioremap_resource(dev, res); - if (IS_ERR(regs)) { - ret = PTR_ERR(regs); - goto err0; - } + dwc_res = *res; + dwc_res.start += DWC3_GLOBALS_REGS_START; + + regs = devm_ioremap_resource(dev, &dwc_res); + if (IS_ERR(regs)) + return PTR_ERR(regs); dwc->regs = regs; - dwc->regs_size = resource_size(res); + dwc->regs_size = resource_size(&dwc_res); dwc3_get_properties(dwc); + dwc->reset = devm_reset_control_get_optional_shared(dev, NULL); + if (IS_ERR(dwc->reset)) + return PTR_ERR(dwc->reset); + + ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + if (ret == -EPROBE_DEFER) + return ret; + /* + * Clocks are optional, but new DT platforms should support all clocks + * as required by the DT-binding. + */ + if (ret) + dwc->num_clks = 0; + + ret = reset_control_deassert(dwc->reset); + if (ret) + goto put_clks; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + platform_set_drvdata(pdev, dwc); dwc3_cache_hwparams(dwc); @@ -1350,13 +1392,13 @@ err1: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); -err0: - /* - * restore res->start back to its original value so that, in case the - * probe is deferred, we don't end up getting error in request the - * memory region the next time probe is called. - */ - res->start -= DWC3_GLOBALS_REGS_START; + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); +put_clks: + clk_bulk_put(dwc->num_clks, dwc->clks); return ret; } @@ -1364,15 +1406,8 @@ err0: static int dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); - struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pm_runtime_get_sync(&pdev->dev); - /* - * restore res->start back to its original value so that, in case the - * probe is deferred, we don't end up getting error in request the - * memory region the next time probe is called. - */ - res->start -= DWC3_GLOBALS_REGS_START; dwc3_debugfs_exit(dwc); dwc3_core_exit_mode(dwc); @@ -1386,14 +1421,48 @@ static int dwc3_remove(struct platform_device *pdev) dwc3_free_event_buffers(dwc); dwc3_free_scratch_buffers(dwc); + clk_bulk_put(dwc->num_clks, dwc->clks); return 0; } #ifdef CONFIG_PM +static int dwc3_core_init_for_resume(struct dwc3 *dwc) +{ + int ret; + + ret = reset_control_deassert(dwc->reset); + if (ret) + return ret; + + ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + if (ret) + goto assert_reset; + + ret = clk_bulk_enable(dwc->num_clks, dwc->clks); + if (ret) + goto unprepare_clks; + + ret = dwc3_core_init(dwc); + if (ret) + goto disable_clks; + + return 0; + +disable_clks: + clk_bulk_disable(dwc->num_clks, dwc->clks); +unprepare_clks: + clk_bulk_unprepare(dwc->num_clks, dwc->clks); +assert_reset: + reset_control_assert(dwc->reset); + + return ret; +} + static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; + u32 reg; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -1403,9 +1472,25 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) dwc3_core_exit(dwc); break; case DWC3_GCTL_PRTCAP_HOST: - /* do nothing during host runtime_suspend */ - if (!PMSG_IS_AUTO(msg)) + if (!PMSG_IS_AUTO(msg)) { dwc3_core_exit(dwc); + break; + } + + /* Let controller to suspend HSPHY before PHY driver suspends */ + if (dwc->dis_u2_susphy_quirk || + dwc->dis_enblslpm_quirk) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | + DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + /* Give some time for USB2 PHY to suspend */ + usleep_range(5000, 6000); + } + + phy_pm_runtime_put_sync(dwc->usb2_generic_phy); + phy_pm_runtime_put_sync(dwc->usb3_generic_phy); break; case DWC3_GCTL_PRTCAP_OTG: /* do nothing during runtime_suspend */ @@ -1433,10 +1518,11 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; int ret; + u32 reg; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; @@ -1446,13 +1532,25 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: - /* nothing to do on host runtime_resume */ if (!PMSG_IS_AUTO(msg)) { - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST); + break; } + /* Restore GUSB2PHYCFG bits that were modified in suspend */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (dwc->dis_u2_susphy_quirk) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + + if (dwc->dis_enblslpm_quirk) + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + + phy_pm_runtime_get_sync(dwc->usb2_generic_phy); + phy_pm_runtime_get_sync(dwc->usb3_generic_phy); break; case DWC3_GCTL_PRTCAP_OTG: /* nothing to do on runtime_resume */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4f3b43809917..285ce0ef3b91 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -639,8 +639,6 @@ struct dwc3_event_buffer { * @resource_index: Resource transfer index * @frame_number: set to the frame number we want this transfer to start (ISOC) * @interval: the interval on which the ISOC transfer is started - * @allocated_requests: number of requests allocated - * @queued_requests: number of requests queued for transfer * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX * @stream_capable: true when streams are enabled @@ -664,11 +662,9 @@ struct dwc3_ep { #define DWC3_EP_ENABLED BIT(0) #define DWC3_EP_STALL BIT(1) #define DWC3_EP_WEDGE BIT(2) -#define DWC3_EP_BUSY BIT(4) +#define DWC3_EP_TRANSFER_STARTED BIT(3) #define DWC3_EP_PENDING_REQUEST BIT(5) -#define DWC3_EP_MISSED_ISOC BIT(6) #define DWC3_EP_END_TRANSFER_PENDING BIT(7) -#define DWC3_EP_TRANSFER_STARTED BIT(8) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN BIT(31) @@ -688,8 +684,6 @@ struct dwc3_ep { u8 number; u8 type; u8 resource_index; - u32 allocated_requests; - u32 queued_requests; u32 frame_number; u32 interval; @@ -832,7 +826,9 @@ struct dwc3_hwparams { * @list: a list_head used for request queueing * @dep: struct dwc3_ep owning this request * @sg: pointer to first incomplete sg + * @start_sg: pointer to the sg which should be queued next * @num_pending_sgs: counter to pending sgs + * @num_queued_sgs: counter to the number of sgs which already got queued * @remaining: amount of data remaining * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb @@ -848,8 +844,10 @@ struct dwc3_request { struct list_head list; struct dwc3_ep *dep; struct scatterlist *sg; + struct scatterlist *start_sg; unsigned num_pending_sgs; + unsigned int num_queued_sgs; unsigned remaining; u8 epnum; struct dwc3_trb *trb; @@ -891,6 +889,9 @@ struct dwc3_scratchpad_array { * @eps: endpoint array * @gadget: device side representation of the peripheral controller * @gadget_driver: pointer to the gadget driver + * @clks: array of clocks + * @num_clks: number of clocks + * @reset: reset control * @regs: base address for our registers * @regs_size: address space size * @fladj: frame length adjustment @@ -1013,6 +1014,11 @@ struct dwc3 { struct usb_gadget gadget; struct usb_gadget_driver *gadget_driver; + struct clk_bulk_data *clks; + int num_clks; + + struct reset_control *reset; + struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; @@ -1197,11 +1203,12 @@ struct dwc3_event_depevt { /* Within XferNotReady */ #define DEPEVT_STATUS_TRANSFER_ACTIVE BIT(3) -/* Within XferComplete */ +/* Within XferComplete or XferInProgress */ #define DEPEVT_STATUS_BUSERR BIT(0) #define DEPEVT_STATUS_SHORT BIT(1) #define DEPEVT_STATUS_IOC BIT(2) -#define DEPEVT_STATUS_LST BIT(3) +#define DEPEVT_STATUS_LST BIT(3) /* XferComplete */ +#define DEPEVT_STATUS_MISSED_ISOC BIT(3) /* XferInProgress */ /* Stream event only */ #define DEPEVT_STREAMEVT_FOUND 1 diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index bfb90c52d8fc..c66d216dcc30 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -475,21 +475,37 @@ dwc3_ep_event_string(char *str, const struct dwc3_event_depevt *event, if (ret < 0) return "UNKNOWN"; + status = event->status; + switch (event->endpoint_event) { case DWC3_DEPEVT_XFERCOMPLETE: - strcat(str, "Transfer Complete"); + len = strlen(str); + sprintf(str + len, "Transfer Complete (%c%c%c)", + status & DEPEVT_STATUS_SHORT ? 'S' : 's', + status & DEPEVT_STATUS_IOC ? 'I' : 'i', + status & DEPEVT_STATUS_LST ? 'L' : 'l'); + len = strlen(str); if (epnum <= 1) sprintf(str + len, " [%s]", dwc3_ep0_state_string(ep0state)); break; case DWC3_DEPEVT_XFERINPROGRESS: - strcat(str, "Transfer In-Progress"); + len = strlen(str); + + sprintf(str + len, "Transfer In Progress [%d] (%c%c%c)", + event->parameters, + status & DEPEVT_STATUS_SHORT ? 'S' : 's', + status & DEPEVT_STATUS_IOC ? 'I' : 'i', + status & DEPEVT_STATUS_LST ? 'M' : 'm'); break; case DWC3_DEPEVT_XFERNOTREADY: - strcat(str, "Transfer Not Ready"); - status = event->status & DEPEVT_STATUS_TRANSFER_ACTIVE; - strcat(str, status ? " (Active)" : " (Not Active)"); + len = strlen(str); + + sprintf(str + len, "Transfer Not Ready [%d]%s", + event->parameters, + status & DEPEVT_STATUS_TRANSFER_ACTIVE ? + " (Active)" : " (Not Active)"); /* Control Endpoints */ if (epnum <= 1) { diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 2f07be1e1f31..df8e73ec3342 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -716,9 +716,6 @@ static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep, struct dentry *dir; dir = debugfs_create_dir(dep->name, parent); - if (IS_ERR_OR_NULL(dir)) - return; - dwc3_debugfs_create_endpoint_files(dep, dir); } @@ -740,49 +737,31 @@ static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc, void dwc3_debugfs_init(struct dwc3 *dwc) { struct dentry *root; - struct dentry *file; - - root = debugfs_create_dir(dev_name(dwc->dev), NULL); - if (IS_ERR_OR_NULL(root)) { - if (!root) - dev_err(dwc->dev, "Can't create debugfs root\n"); - return; - } - dwc->root = root; dwc->regset = kzalloc(sizeof(*dwc->regset), GFP_KERNEL); - if (!dwc->regset) { - debugfs_remove_recursive(root); + if (!dwc->regset) return; - } dwc->regset->regs = dwc3_regs; dwc->regset->nregs = ARRAY_SIZE(dwc3_regs); dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START; - file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs regdump\n"); + root = debugfs_create_dir(dev_name(dwc->dev), NULL); + dwc->root = root; + + debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { - file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, - dwc, &dwc3_mode_fops); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs mode\n"); + debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_mode_fops); } if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) || IS_ENABLED(CONFIG_USB_DWC3_GADGET)) { - file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, - dwc, &dwc3_testmode_fops); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs testmode\n"); - - file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, - root, dwc, &dwc3_link_state_fops); - if (!file) - dev_dbg(dwc->dev, "Can't create debugfs link_state\n"); - + debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_testmode_fops); + debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_link_state_fops); dwc3_debugfs_create_endpoint_dirs(dwc, root); } } diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 1d8c557e97e0..218371f985ca 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -8,6 +8,7 @@ */ #include <linux/extcon.h> +#include <linux/of_graph.h> #include <linux/platform_device.h> #include "debug.h" @@ -439,17 +440,38 @@ static int dwc3_drd_notifier(struct notifier_block *nb, return NOTIFY_DONE; } +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + struct device_node *np_phy, *np_conn; + struct extcon_dev *edev; + + if (of_property_read_bool(dev->of_node, "extcon")) + return extcon_get_edev_by_phandle(dwc->dev, 0); + + np_phy = of_parse_phandle(dev->of_node, "phys", 0); + np_conn = of_graph_get_remote_node(np_phy, -1, -1); + + if (np_conn) + edev = extcon_find_edev_by_node(np_conn); + else + edev = NULL; + + of_node_put(np_conn); + of_node_put(np_phy); + + return edev; +} + int dwc3_drd_init(struct dwc3 *dwc) { int ret, irq; - if (dwc->dev->of_node && - of_property_read_bool(dwc->dev->of_node, "extcon")) { - dwc->edev = extcon_get_edev_by_phandle(dwc->dev, 0); - - if (IS_ERR(dwc->edev)) - return PTR_ERR(dwc->edev); + dwc->edev = dwc3_get_extcon(dwc); + if (IS_ERR(dwc->edev)) + return PTR_ERR(dwc->edev); + if (dwc->edev) { dwc->edev_nb.notifier_call = dwc3_drd_notifier; ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, &dwc->edev_nb); diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index cb2ee96fd3e8..6b3ccd542bd7 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -208,13 +208,13 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = { }; static const struct of_device_id of_dwc3_simple_match[] = { - { .compatible = "qcom,dwc3" }, { .compatible = "rockchip,rk3399-dwc3" }, { .compatible = "xlnx,zynqmp-dwc3" }, { .compatible = "cavium,octeon-7130-usb-uctl" }, { .compatible = "sprd,sc9860-dwc3" }, { .compatible = "amlogic,meson-axg-dwc3" }, { .compatible = "amlogic,meson-gxl-dwc3" }, + { .compatible = "allwinner,sun50i-h6-dwc3" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, of_dwc3_simple_match); diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c new file mode 100644 index 000000000000..b0e67ab2f98c --- /dev/null +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. + * + * Inspired by dwc3-of-simple.c + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/extcon.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/usb/of.h> +#include <linux/reset.h> +#include <linux/iopoll.h> + +#include "core.h" + +/* USB QSCRATCH Hardware registers */ +#define QSCRATCH_HS_PHY_CTRL 0x10 +#define UTMI_OTG_VBUS_VALID BIT(20) +#define SW_SESSVLD_SEL BIT(28) + +#define QSCRATCH_SS_PHY_CTRL 0x30 +#define LANE0_PWR_PRESENT BIT(24) + +#define QSCRATCH_GENERAL_CFG 0x08 +#define PIPE_UTMI_CLK_SEL BIT(0) +#define PIPE3_PHYSTATUS_SW BIT(3) +#define PIPE_UTMI_CLK_DIS BIT(8) + +#define PWR_EVNT_IRQ_STAT_REG 0x58 +#define PWR_EVNT_LPM_IN_L2_MASK BIT(4) +#define PWR_EVNT_LPM_OUT_L2_MASK BIT(5) + +struct dwc3_qcom { + struct device *dev; + void __iomem *qscratch_base; + struct platform_device *dwc3; + struct clk **clks; + int num_clocks; + struct reset_control *resets; + + int hs_phy_irq; + int dp_hs_phy_irq; + int dm_hs_phy_irq; + int ss_phy_irq; + + struct extcon_dev *edev; + struct extcon_dev *host_edev; + struct notifier_block vbus_nb; + struct notifier_block host_nb; + + enum usb_dr_mode mode; + bool is_suspended; + bool pm_suspended; +}; + +static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg |= val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +static void dwc3_qcom_vbus_overrride_enable(struct dwc3_qcom *qcom, bool enable) +{ + if (enable) { + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL, + LANE0_PWR_PRESENT); + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL, + UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL); + } else { + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL, + LANE0_PWR_PRESENT); + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL, + UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL); + } +} + +static int dwc3_qcom_vbus_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb); + + /* enable vbus override for device mode */ + dwc3_qcom_vbus_overrride_enable(qcom, event); + qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST; + + return NOTIFY_DONE; +} + +static int dwc3_qcom_host_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb); + + /* disable vbus override in host mode */ + dwc3_qcom_vbus_overrride_enable(qcom, !event); + qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL; + + return NOTIFY_DONE; +} + +static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) +{ + struct device *dev = qcom->dev; + struct extcon_dev *host_edev; + int ret; + + if (!of_property_read_bool(dev->of_node, "extcon")) + return 0; + + qcom->edev = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(qcom->edev)) + return PTR_ERR(qcom->edev); + + qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier; + + qcom->host_edev = extcon_get_edev_by_phandle(dev, 1); + if (IS_ERR(qcom->host_edev)) + qcom->host_edev = NULL; + + ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB, + &qcom->vbus_nb); + if (ret < 0) { + dev_err(dev, "VBUS notifier register failed\n"); + return ret; + } + + if (qcom->host_edev) + host_edev = qcom->host_edev; + else + host_edev = qcom->edev; + + qcom->host_nb.notifier_call = dwc3_qcom_host_notifier; + ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST, + &qcom->host_nb); + if (ret < 0) { + dev_err(dev, "Host notifier register failed\n"); + return ret; + } + + /* Update initial VBUS override based on extcon state */ + if (extcon_get_state(qcom->edev, EXTCON_USB) || + !extcon_get_state(host_edev, EXTCON_USB_HOST)) + dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev); + else + dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev); + + return 0; +} + +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) +{ + if (qcom->hs_phy_irq) { + disable_irq_wake(qcom->hs_phy_irq); + disable_irq_nosync(qcom->hs_phy_irq); + } + + if (qcom->dp_hs_phy_irq) { + disable_irq_wake(qcom->dp_hs_phy_irq); + disable_irq_nosync(qcom->dp_hs_phy_irq); + } + + if (qcom->dm_hs_phy_irq) { + disable_irq_wake(qcom->dm_hs_phy_irq); + disable_irq_nosync(qcom->dm_hs_phy_irq); + } + + if (qcom->ss_phy_irq) { + disable_irq_wake(qcom->ss_phy_irq); + disable_irq_nosync(qcom->ss_phy_irq); + } +} + +static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) +{ + if (qcom->hs_phy_irq) { + enable_irq(qcom->hs_phy_irq); + enable_irq_wake(qcom->hs_phy_irq); + } + + if (qcom->dp_hs_phy_irq) { + enable_irq(qcom->dp_hs_phy_irq); + enable_irq_wake(qcom->dp_hs_phy_irq); + } + + if (qcom->dm_hs_phy_irq) { + enable_irq(qcom->dm_hs_phy_irq); + enable_irq_wake(qcom->dm_hs_phy_irq); + } + + if (qcom->ss_phy_irq) { + enable_irq(qcom->ss_phy_irq); + enable_irq_wake(qcom->ss_phy_irq); + } +} + +static int dwc3_qcom_suspend(struct dwc3_qcom *qcom) +{ + u32 val; + int i; + + if (qcom->is_suspended) + return 0; + + val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG); + if (!(val & PWR_EVNT_LPM_IN_L2_MASK)) + dev_err(qcom->dev, "HS-PHY not in L2\n"); + + for (i = qcom->num_clocks - 1; i >= 0; i--) + clk_disable_unprepare(qcom->clks[i]); + + qcom->is_suspended = true; + dwc3_qcom_enable_interrupts(qcom); + + return 0; +} + +static int dwc3_qcom_resume(struct dwc3_qcom *qcom) +{ + int ret; + int i; + + if (!qcom->is_suspended) + return 0; + + dwc3_qcom_disable_interrupts(qcom); + + for (i = 0; i < qcom->num_clocks; i++) { + ret = clk_prepare_enable(qcom->clks[i]); + if (ret < 0) { + while (--i >= 0) + clk_disable_unprepare(qcom->clks[i]); + return ret; + } + } + + /* Clear existing events from PHY related to L2 in/out */ + dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG, + PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK); + + qcom->is_suspended = false; + + return 0; +} + +static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) +{ + struct dwc3_qcom *qcom = data; + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + + /* If pm_suspended then let pm_resume take care of resuming h/w */ + if (qcom->pm_suspended) + return IRQ_HANDLED; + + if (dwc->xhci) + pm_runtime_resume(&dwc->xhci->dev); + + return IRQ_HANDLED; +} + +static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom) +{ + /* Configure dwc3 to use UTMI clock as PIPE clock not present */ + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_DIS); + + usleep_range(100, 1000); + + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW); + + usleep_range(100, 1000); + + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_DIS); +} + +static int dwc3_qcom_setup_irq(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + int irq, ret; + + irq = platform_get_irq_byname(pdev, "hs_phy_irq"); + if (irq > 0) { + /* Keep wakeup interrupts disabled until suspend */ + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 HS", qcom); + if (ret) { + dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->hs_phy_irq = irq; + } + + irq = platform_get_irq_byname(pdev, "dp_hs_phy_irq"); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 DP_HS", qcom); + if (ret) { + dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->dp_hs_phy_irq = irq; + } + + irq = platform_get_irq_byname(pdev, "dm_hs_phy_irq"); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 DM_HS", qcom); + if (ret) { + dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->dm_hs_phy_irq = irq; + } + + irq = platform_get_irq_byname(pdev, "ss_phy_irq"); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "qcom_dwc3 SS", qcom); + if (ret) { + dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); + return ret; + } + qcom->ss_phy_irq = irq; + } + + return 0; +} + +static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count) +{ + struct device *dev = qcom->dev; + struct device_node *np = dev->of_node; + int i; + + qcom->num_clocks = count; + + if (!count) + return 0; + + qcom->clks = devm_kcalloc(dev, qcom->num_clocks, + sizeof(struct clk *), GFP_KERNEL); + if (!qcom->clks) + return -ENOMEM; + + for (i = 0; i < qcom->num_clocks; i++) { + struct clk *clk; + int ret; + + clk = of_clk_get(np, i); + if (IS_ERR(clk)) { + while (--i >= 0) + clk_put(qcom->clks[i]); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret < 0) { + while (--i >= 0) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } + clk_put(clk); + + return ret; + } + + qcom->clks[i] = clk; + } + + return 0; +} + +static int dwc3_qcom_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node, *dwc3_np; + struct device *dev = &pdev->dev; + struct dwc3_qcom *qcom; + struct resource *res; + int ret, i; + bool ignore_pipe_clk; + + qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL); + if (!qcom) + return -ENOMEM; + + platform_set_drvdata(pdev, qcom); + qcom->dev = &pdev->dev; + + qcom->resets = devm_reset_control_array_get_optional_exclusive(dev); + if (IS_ERR(qcom->resets)) { + ret = PTR_ERR(qcom->resets); + dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret); + return ret; + } + + ret = reset_control_assert(qcom->resets); + if (ret) { + dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret); + return ret; + } + + usleep_range(10, 1000); + + ret = reset_control_deassert(qcom->resets); + if (ret) { + dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret); + goto reset_assert; + } + + ret = dwc3_qcom_clk_init(qcom, of_count_phandle_with_args(np, + "clocks", "#clock-cells")); + if (ret) { + dev_err(dev, "failed to get clocks\n"); + goto reset_assert; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + qcom->qscratch_base = devm_ioremap_resource(dev, res); + if (IS_ERR(qcom->qscratch_base)) { + dev_err(dev, "failed to map qscratch, err=%d\n", ret); + ret = PTR_ERR(qcom->qscratch_base); + goto clk_disable; + } + + ret = dwc3_qcom_setup_irq(pdev); + if (ret) + goto clk_disable; + + dwc3_np = of_get_child_by_name(np, "dwc3"); + if (!dwc3_np) { + dev_err(dev, "failed to find dwc3 core child\n"); + ret = -ENODEV; + goto clk_disable; + } + + /* + * Disable pipe_clk requirement if specified. Used when dwc3 + * operates without SSPHY and only HS/FS/LS modes are supported. + */ + ignore_pipe_clk = device_property_read_bool(dev, + "qcom,select-utmi-as-pipe-clk"); + if (ignore_pipe_clk) + dwc3_qcom_select_utmi_clk(qcom); + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to register dwc3 core - %d\n", ret); + goto clk_disable; + } + + qcom->dwc3 = of_find_device_by_node(dwc3_np); + if (!qcom->dwc3) { + dev_err(&pdev->dev, "failed to get dwc3 platform device\n"); + goto depopulate; + } + + qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev); + + /* enable vbus override for device mode */ + if (qcom->mode == USB_DR_MODE_PERIPHERAL) + dwc3_qcom_vbus_overrride_enable(qcom, true); + + /* register extcon to override sw_vbus on Vbus change later */ + ret = dwc3_qcom_register_extcon(qcom); + if (ret) + goto depopulate; + + device_init_wakeup(&pdev->dev, 1); + qcom->is_suspended = false; + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_forbid(dev); + + return 0; + +depopulate: + of_platform_depopulate(&pdev->dev); +clk_disable: + for (i = qcom->num_clocks - 1; i >= 0; i--) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } +reset_assert: + reset_control_assert(qcom->resets); + + return ret; +} + +static int dwc3_qcom_remove(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + int i; + + of_platform_depopulate(dev); + + for (i = qcom->num_clocks - 1; i >= 0; i--) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } + qcom->num_clocks = 0; + + reset_control_assert(qcom->resets); + + pm_runtime_allow(dev); + pm_runtime_disable(dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int dwc3_qcom_pm_suspend(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + int ret = 0; + + ret = dwc3_qcom_suspend(qcom); + if (!ret) + qcom->pm_suspended = true; + + return ret; +} + +static int dwc3_qcom_pm_resume(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + int ret; + + ret = dwc3_qcom_resume(qcom); + if (!ret) + qcom->pm_suspended = false; + + return ret; +} +#endif + +#ifdef CONFIG_PM +static int dwc3_qcom_runtime_suspend(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + + return dwc3_qcom_suspend(qcom); +} + +static int dwc3_qcom_runtime_resume(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + + return dwc3_qcom_resume(qcom); +} +#endif + +static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume) + SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume, + NULL) +}; + +static const struct of_device_id dwc3_qcom_of_match[] = { + { .compatible = "qcom,dwc3" }, + { .compatible = "qcom,msm8996-dwc3" }, + { .compatible = "qcom,sdm845-dwc3" }, + { } +}; +MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match); + +static struct platform_driver dwc3_qcom_driver = { + .probe = dwc3_qcom_probe, + .remove = dwc3_qcom_remove, + .driver = { + .name = "dwc3-qcom", + .pm = &dwc3_qcom_dev_pm_ops, + .of_match_table = dwc3_qcom_of_match, + }, +}; + +module_platform_driver(dwc3_qcom_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver"); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 5a991bca8ed7..c77ff50a88a2 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -66,7 +66,7 @@ static int dwc3_ep0_start_trans(struct dwc3_ep *dep) struct dwc3 *dwc; int ret; - if (dep->flags & DWC3_EP_BUSY) + if (dep->flags & DWC3_EP_TRANSFER_STARTED) return 0; dwc = dep->dwc; @@ -79,8 +79,6 @@ static int dwc3_ep0_start_trans(struct dwc3_ep *dep) if (ret < 0) return ret; - dep->flags |= DWC3_EP_BUSY; - dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep); dwc->ep0_next_event = DWC3_EP0_COMPLETE; return 0; @@ -913,7 +911,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, { struct dwc3_ep *dep = dwc->eps[event->endpoint_number]; - dep->flags &= ~DWC3_EP_BUSY; + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; dep->resource_index = 0; dwc->setup_packet_pending = false; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 0dedf8a799f4..69bf137aab37 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -27,6 +27,9 @@ #include "gadget.h" #include "io.h" +#define DWC3_ALIGN_FRAME(d) (((d)->frame_number + (d)->interval) \ + & ~((d)->interval - 1)) + /** * dwc3_gadget_set_test_mode - enables usb2 test modes * @dwc: pointer to our context structure @@ -375,6 +378,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, switch (DWC3_DEPCMD_CMD(cmd)) { case DWC3_DEPCMD_STARTTRANSFER: dep->flags |= DWC3_EP_TRANSFER_STARTED; + dwc3_gadget_ep_get_transfer_index(dep); break; case DWC3_DEPCMD_ENDTRANSFER: dep->flags &= ~DWC3_EP_TRANSFER_STARTED; @@ -455,7 +459,17 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep) dep->trb_pool_dma = 0; } -static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep); +static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep) +{ + struct dwc3_gadget_ep_cmd_params params; + + memset(¶ms, 0x00, sizeof(params)); + + params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); + + return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, + ¶ms); +} /** * dwc3_gadget_start_config - configure ep resources @@ -491,9 +505,10 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep); * triggered only when called for EP0-out, which always happens first, and which * should only happen in one of the above conditions. */ -static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) +static int dwc3_gadget_start_config(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; + struct dwc3 *dwc; u32 cmd; int i; int ret; @@ -503,6 +518,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) memset(¶ms, 0x00, sizeof(params)); cmd = DWC3_DEPCMD_DEPSTARTCFG; + dwc = dep->dwc; ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret) @@ -514,7 +530,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) if (!dep) continue; - ret = dwc3_gadget_set_xfer_resource(dwc, dep); + ret = dwc3_gadget_set_xfer_resource(dep); if (ret) return ret; } @@ -522,16 +538,12 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) return 0; } -static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, - bool modify, bool restore) +static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) { const struct usb_ss_ep_comp_descriptor *comp_desc; const struct usb_endpoint_descriptor *desc; struct dwc3_gadget_ep_cmd_params params; - - if (dev_WARN_ONCE(dwc->dev, modify && restore, - "Can't modify and restore\n")) - return -EINVAL; + struct dwc3 *dwc = dep->dwc; comp_desc = dep->endpoint.comp_desc; desc = dep->endpoint.desc; @@ -547,14 +559,9 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1); } - if (modify) { - params.param0 |= DWC3_DEPCFG_ACTION_MODIFY; - } else if (restore) { - params.param0 |= DWC3_DEPCFG_ACTION_RESTORE; + params.param0 |= action; + if (action == DWC3_DEPCFG_ACTION_RESTORE) params.param2 |= dep->saved_state; - } else { - params.param0 |= DWC3_DEPCFG_ACTION_INIT; - } if (usb_endpoint_xfer_control(desc)) params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN; @@ -594,29 +601,15 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms); } -static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) -{ - struct dwc3_gadget_ep_cmd_params params; - - memset(¶ms, 0x00, sizeof(params)); - - params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); - - return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, - ¶ms); -} - /** * __dwc3_gadget_ep_enable - initializes a hw endpoint * @dep: endpoint to be initialized - * @modify: if true, modify existing endpoint configuration - * @restore: if true, restore endpoint configuration from scratch buffer + * @action: one of INIT, MODIFY or RESTORE * * Caller should take care of locking. Execute all necessary commands to * initialize a HW endpoint so it can be used by a gadget driver. */ -static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, - bool modify, bool restore) +static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; @@ -625,12 +618,12 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, int ret; if (!(dep->flags & DWC3_EP_ENABLED)) { - ret = dwc3_gadget_start_config(dwc, dep); + ret = dwc3_gadget_start_config(dep); if (ret) return ret; } - ret = dwc3_gadget_set_ep_config(dwc, dep, modify, restore); + ret = dwc3_gadget_set_ep_config(dep, action); if (ret) return ret; @@ -671,7 +664,8 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, * Issue StartTransfer here with no-op TRB so we can always rely on No * Response Update Transfer command. */ - if (usb_endpoint_xfer_bulk(desc)) { + if (usb_endpoint_xfer_bulk(desc) || + usb_endpoint_xfer_int(desc)) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; dma_addr_t trb_dma; @@ -689,26 +683,20 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret < 0) return ret; - - dep->flags |= DWC3_EP_BUSY; - - dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep); - WARN_ON_ONCE(!dep->resource_index); } - out: trace_dwc3_gadget_ep_enable(dep); return 0; } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force); +static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force); static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_request *req; - dwc3_stop_active_transfer(dwc, dep->number, true); + dwc3_stop_active_transfer(dep, true); /* - giveback all requests to gadget driver */ while (!list_empty(&dep->started_list)) { @@ -806,7 +794,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, return 0; spin_lock_irqsave(&dwc->lock, flags); - ret = __dwc3_gadget_ep_enable(dep, false, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -840,7 +828,7 @@ static int dwc3_gadget_ep_disable(struct usb_ep *ep) } static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, - gfp_t gfp_flags) + gfp_t gfp_flags) { struct dwc3_request *req; struct dwc3_ep *dep = to_dwc3_ep(ep); @@ -849,11 +837,10 @@ static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep, if (!req) return NULL; + req->direction = dep->direction; req->epnum = dep->number; req->dep = dep; - dep->allocated_requests++; - trace_dwc3_alloc_request(req); return &req->request; @@ -863,14 +850,58 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep, struct usb_request *request) { struct dwc3_request *req = to_dwc3_request(request); - struct dwc3_ep *dep = to_dwc3_ep(ep); - dep->allocated_requests--; trace_dwc3_free_request(req); kfree(req); } -static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep); +/** + * dwc3_ep_prev_trb - returns the previous TRB in the ring + * @dep: The endpoint with the TRB ring + * @index: The index of the current TRB in the ring + * + * Returns the TRB prior to the one pointed to by the index. If the + * index is 0, we will wrap backwards, skip the link TRB, and return + * the one just before that. + */ +static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) +{ + u8 tmp = index; + + if (!tmp) + tmp = DWC3_TRB_NUM - 1; + + return &dep->trb_pool[tmp - 1]; +} + +static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) +{ + struct dwc3_trb *tmp; + u8 trbs_left; + + /* + * If enqueue & dequeue are equal than it is either full or empty. + * + * One way to know for sure is if the TRB right before us has HWO bit + * set or not. If it has, then we're definitely full and can't fit any + * more transfers in our ring. + */ + if (dep->trb_enqueue == dep->trb_dequeue) { + tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue); + if (tmp->ctrl & DWC3_TRB_CTRL_HWO) + return 0; + + return DWC3_TRB_NUM - 1; + } + + trbs_left = dep->trb_dequeue - dep->trb_enqueue; + trbs_left &= (DWC3_TRB_NUM - 1); + + if (dep->trb_dequeue < dep->trb_enqueue) + trbs_left--; + + return trbs_left; +} static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, dma_addr_t dma, unsigned length, unsigned chain, unsigned node, @@ -985,11 +1016,19 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_request *req, unsigned chain, unsigned node) { struct dwc3_trb *trb; - unsigned length = req->request.length; + unsigned int length; + dma_addr_t dma; unsigned stream_id = req->request.stream_id; unsigned short_not_ok = req->request.short_not_ok; unsigned no_interrupt = req->request.no_interrupt; - dma_addr_t dma = req->request.dma; + + if (req->request.num_sgs > 0) { + length = sg_dma_len(req->start_sg); + dma = sg_dma_address(req->start_sg); + } else { + length = req->request.length; + dma = req->request.dma; + } trb = &dep->trb_pool[dep->trb_enqueue]; @@ -997,69 +1036,23 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, dwc3_gadget_move_started_request(req); req->trb = trb; req->trb_dma = dwc3_trb_dma_offset(dep, trb); - dep->queued_requests++; } __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node, stream_id, short_not_ok, no_interrupt); } -/** - * dwc3_ep_prev_trb - returns the previous TRB in the ring - * @dep: The endpoint with the TRB ring - * @index: The index of the current TRB in the ring - * - * Returns the TRB prior to the one pointed to by the index. If the - * index is 0, we will wrap backwards, skip the link TRB, and return - * the one just before that. - */ -static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) -{ - u8 tmp = index; - - if (!tmp) - tmp = DWC3_TRB_NUM - 1; - - return &dep->trb_pool[tmp - 1]; -} - -static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) -{ - struct dwc3_trb *tmp; - u8 trbs_left; - - /* - * If enqueue & dequeue are equal than it is either full or empty. - * - * One way to know for sure is if the TRB right before us has HWO bit - * set or not. If it has, then we're definitely full and can't fit any - * more transfers in our ring. - */ - if (dep->trb_enqueue == dep->trb_dequeue) { - tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue); - if (tmp->ctrl & DWC3_TRB_CTRL_HWO) - return 0; - - return DWC3_TRB_NUM - 1; - } - - trbs_left = dep->trb_dequeue - dep->trb_enqueue; - trbs_left &= (DWC3_TRB_NUM - 1); - - if (dep->trb_dequeue < dep->trb_enqueue) - trbs_left--; - - return trbs_left; -} - static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, struct dwc3_request *req) { - struct scatterlist *sg = req->sg; + struct scatterlist *sg = req->start_sg; struct scatterlist *s; int i; - for_each_sg(sg, s, req->num_pending_sgs, i) { + unsigned int remaining = req->request.num_mapped_sgs + - req->num_queued_sgs; + + for_each_sg(sg, s, remaining, i) { unsigned int length = req->request.length; unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc); unsigned int rem = length % maxp; @@ -1088,6 +1081,18 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, dwc3_prepare_one_trb(dep, req, chain, i); } + /* + * There can be a situation where all sgs in sglist are not + * queued because of insufficient trb number. To handle this + * case, update start_sg to next sg to be queued, so that + * we have free trbs we can continue queuing from where we + * previously stopped + */ + if (chain) + req->start_sg = sg_next(s); + + req->num_queued_sgs++; + if (!dwc3_calc_trbs_left(dep)) break; } @@ -1178,6 +1183,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) return; req->sg = req->request.sg; + req->start_sg = req->sg; + req->num_queued_sgs = 0; req->num_pending_sgs = req->request.num_mapped_sgs; if (req->num_pending_sgs > 0) @@ -1201,7 +1208,7 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) if (!dwc3_calc_trbs_left(dep)) return 0; - starting = !(dep->flags & DWC3_EP_BUSY); + starting = !(dep->flags & DWC3_EP_TRANSFER_STARTED); dwc3_prepare_trbs(dep); req = next_request(&dep->started_list); @@ -1233,18 +1240,10 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) */ if (req->trb) memset(req->trb, 0, sizeof(struct dwc3_trb)); - dep->queued_requests--; dwc3_gadget_del_and_unmap_request(dep, req, ret); return ret; } - dep->flags |= DWC3_EP_BUSY; - - if (starting) { - dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep); - WARN_ON_ONCE(!dep->resource_index); - } - return 0; } @@ -1256,35 +1255,19 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc) return DWC3_DSTS_SOFFN(reg); } -static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, - struct dwc3_ep *dep, u32 cur_uf) +static void __dwc3_gadget_start_isoc(struct dwc3_ep *dep) { if (list_empty(&dep->pending_list)) { - dev_info(dwc->dev, "%s: ran out of requests\n", + dev_info(dep->dwc->dev, "%s: ran out of requests\n", dep->name); dep->flags |= DWC3_EP_PENDING_REQUEST; return; } - /* - * Schedule the first trb for one interval in the future or at - * least 4 microframes. - */ - dep->frame_number = cur_uf + max_t(u32, 4, dep->interval); + dep->frame_number = DWC3_ALIGN_FRAME(dep); __dwc3_gadget_kick_transfer(dep); } -static void dwc3_gadget_start_isoc(struct dwc3 *dwc, - struct dwc3_ep *dep, const struct dwc3_event_depevt *event) -{ - u32 cur_uf, mask; - - mask = ~(dep->interval - 1); - cur_uf = event->parameters & mask; - - __dwc3_gadget_start_isoc(dwc, dep, cur_uf); -} - static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; @@ -1303,8 +1286,6 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) req->request.actual = 0; req->request.status = -EINPROGRESS; - req->direction = dep->direction; - req->epnum = dep->number; trace_dwc3_ep_queue(req); @@ -1319,28 +1300,18 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * errors which will force us issue EndTransfer command. */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { - if (dep->flags & DWC3_EP_TRANSFER_STARTED) { - dwc3_stop_active_transfer(dwc, dep->number, true); - dep->flags = DWC3_EP_ENABLED; - } else { - u32 cur_uf; + if (!(dep->flags & DWC3_EP_PENDING_REQUEST) && + !(dep->flags & DWC3_EP_TRANSFER_STARTED)) + return 0; - cur_uf = __dwc3_gadget_get_frame(dwc); - __dwc3_gadget_start_isoc(dwc, dep, cur_uf); - dep->flags &= ~DWC3_EP_PENDING_REQUEST; + if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) { + __dwc3_gadget_start_isoc(dep); + return 0; } - return 0; } - - if ((dep->flags & DWC3_EP_BUSY) && - !(dep->flags & DWC3_EP_MISSED_ISOC)) - goto out; - - return 0; } -out: return __dwc3_gadget_kick_transfer(dep); } @@ -1390,7 +1361,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, } if (r == req) { /* wait until it is processed */ - dwc3_stop_active_transfer(dwc, dep->number, true); + dwc3_stop_active_transfer(dep, true); /* * If request was already started, this means we had to @@ -1463,7 +1434,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, out1: /* giveback the request */ - dep->queued_requests--; + dwc3_gadget_giveback(dep, req, -ECONNRESET); out0: @@ -1878,14 +1849,14 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, false, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err0; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, false, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err1; @@ -2082,113 +2053,142 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { /* -------------------------------------------------------------------------- */ -static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total) +static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep) { - struct dwc3_ep *dep; - u8 epnum; + struct dwc3 *dwc = dep->dwc; - INIT_LIST_HEAD(&dwc->gadget.ep_list); + usb_ep_set_maxpacket_limit(&dep->endpoint, 512); + dep->endpoint.maxburst = 1; + dep->endpoint.ops = &dwc3_gadget_ep0_ops; + if (!dep->direction) + dwc->gadget.ep0 = &dep->endpoint; - for (epnum = 0; epnum < total; epnum++) { - bool direction = epnum & 1; - u8 num = epnum >> 1; + dep->endpoint.caps.type_control = true; - dep = kzalloc(sizeof(*dep), GFP_KERNEL); - if (!dep) - return -ENOMEM; + return 0; +} - dep->dwc = dwc; - dep->number = epnum; - dep->direction = direction; - dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); - dwc->eps[epnum] = dep; +static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + int mdwidth; + int kbytes; + int size; - snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, - direction ? "in" : "out"); + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); + /* MDWIDTH is represented in bits, we need it in bytes */ + mdwidth /= 8; - dep->endpoint.name = dep->name; + size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1)); + if (dwc3_is_usb31(dwc)) + size = DWC31_GTXFIFOSIZ_TXFDEF(size); + else + size = DWC3_GTXFIFOSIZ_TXFDEF(size); - if (!(dep->number > 1)) { - dep->endpoint.desc = &dwc3_gadget_ep0_desc; - dep->endpoint.comp_desc = NULL; - } + /* FIFO Depth is in MDWDITH bytes. Multiply */ + size *= mdwidth; - spin_lock_init(&dep->lock); - - if (num == 0) { - usb_ep_set_maxpacket_limit(&dep->endpoint, 512); - dep->endpoint.maxburst = 1; - dep->endpoint.ops = &dwc3_gadget_ep0_ops; - if (!direction) - dwc->gadget.ep0 = &dep->endpoint; - } else if (direction) { - int mdwidth; - int kbytes; - int size; - int ret; - - mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); - /* MDWIDTH is represented in bits, we need it in bytes */ - mdwidth /= 8; - - size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(num)); - if (dwc3_is_usb31(dwc)) - size = DWC31_GTXFIFOSIZ_TXFDEF(size); - else - size = DWC3_GTXFIFOSIZ_TXFDEF(size); + kbytes = size / 1024; + if (kbytes == 0) + kbytes = 1; - /* FIFO Depth is in MDWDITH bytes. Multiply */ - size *= mdwidth; + /* + * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for + * internal overhead. We don't really know how these are used, + * but documentation say it exists. + */ + size -= mdwidth * (kbytes + 1); + size /= kbytes; - kbytes = size / 1024; - if (kbytes == 0) - kbytes = 1; + usb_ep_set_maxpacket_limit(&dep->endpoint, size); - /* - * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for - * internal overhead. We don't really know how these are used, - * but documentation say it exists. - */ - size -= mdwidth * (kbytes + 1); - size /= kbytes; + dep->endpoint.max_streams = 15; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget.ep_list); + dep->endpoint.caps.type_iso = true; + dep->endpoint.caps.type_bulk = true; + dep->endpoint.caps.type_int = true; - usb_ep_set_maxpacket_limit(&dep->endpoint, size); + return dwc3_alloc_trb_pool(dep); +} - dep->endpoint.max_streams = 15; - dep->endpoint.ops = &dwc3_gadget_ep_ops; - list_add_tail(&dep->endpoint.ep_list, - &dwc->gadget.ep_list); +static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; - ret = dwc3_alloc_trb_pool(dep); - if (ret) - return ret; - } else { - int ret; + usb_ep_set_maxpacket_limit(&dep->endpoint, 1024); + dep->endpoint.max_streams = 15; + dep->endpoint.ops = &dwc3_gadget_ep_ops; + list_add_tail(&dep->endpoint.ep_list, + &dwc->gadget.ep_list); + dep->endpoint.caps.type_iso = true; + dep->endpoint.caps.type_bulk = true; + dep->endpoint.caps.type_int = true; - usb_ep_set_maxpacket_limit(&dep->endpoint, 1024); - dep->endpoint.max_streams = 15; - dep->endpoint.ops = &dwc3_gadget_ep_ops; - list_add_tail(&dep->endpoint.ep_list, - &dwc->gadget.ep_list); + return dwc3_alloc_trb_pool(dep); +} - ret = dwc3_alloc_trb_pool(dep); - if (ret) - return ret; - } +static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) +{ + struct dwc3_ep *dep; + bool direction = epnum & 1; + int ret; + u8 num = epnum >> 1; - if (num == 0) { - dep->endpoint.caps.type_control = true; - } else { - dep->endpoint.caps.type_iso = true; - dep->endpoint.caps.type_bulk = true; - dep->endpoint.caps.type_int = true; - } + dep = kzalloc(sizeof(*dep), GFP_KERNEL); + if (!dep) + return -ENOMEM; - dep->endpoint.caps.dir_in = direction; - dep->endpoint.caps.dir_out = !direction; + dep->dwc = dwc; + dep->number = epnum; + dep->direction = direction; + dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); + dwc->eps[epnum] = dep; - INIT_LIST_HEAD(&dep->pending_list); - INIT_LIST_HEAD(&dep->started_list); + snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, + direction ? "in" : "out"); + + dep->endpoint.name = dep->name; + + if (!(dep->number > 1)) { + dep->endpoint.desc = &dwc3_gadget_ep0_desc; + dep->endpoint.comp_desc = NULL; + } + + spin_lock_init(&dep->lock); + + if (num == 0) + ret = dwc3_gadget_init_control_endpoint(dep); + else if (direction) + ret = dwc3_gadget_init_in_endpoint(dep); + else + ret = dwc3_gadget_init_out_endpoint(dep); + + if (ret) + return ret; + + dep->endpoint.caps.dir_in = direction; + dep->endpoint.caps.dir_out = !direction; + + INIT_LIST_HEAD(&dep->pending_list); + INIT_LIST_HEAD(&dep->started_list); + + return 0; +} + +static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total) +{ + u8 epnum; + + INIT_LIST_HEAD(&dwc->gadget.ep_list); + + for (epnum = 0; epnum < total; epnum++) { + int ret; + + ret = dwc3_gadget_init_endpoint(dwc, epnum); + if (ret) + return ret; } return 0; @@ -2223,20 +2223,14 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) /* -------------------------------------------------------------------------- */ -static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, +static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, struct dwc3_request *req, struct dwc3_trb *trb, - const struct dwc3_event_depevt *event, int status, - int chain) + const struct dwc3_event_depevt *event, int status, int chain) { unsigned int count; - unsigned int s_pkt = 0; - unsigned int trb_status; dwc3_ep_inc_deq(dep); - if (req->trb == trb) - dep->queued_requests--; - trace_dwc3_complete_trb(dep, trb); /* @@ -2268,159 +2262,140 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) return 1; - if (dep->direction) { - if (count) { - trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); - if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { - /* - * If missed isoc occurred and there is - * no request queued then issue END - * TRANSFER, so that core generates - * next xfernotready and we will issue - * a fresh START TRANSFER. - * If there are still queued request - * then wait, do not issue either END - * or UPDATE TRANSFER, just attach next - * request in pending_list during - * giveback.If any future queued request - * is successfully transferred then we - * will issue UPDATE TRANSFER for all - * request in the pending_list. - */ - dep->flags |= DWC3_EP_MISSED_ISOC; - } else { - dev_err(dwc->dev, "incomplete IN transfer %s\n", - dep->name); - status = -ECONNRESET; - } - } else { - dep->flags &= ~DWC3_EP_MISSED_ISOC; - } - } else { - if (count && (event->status & DEPEVT_STATUS_SHORT)) - s_pkt = 1; - } - - if (s_pkt && !chain) + if (event->status & DEPEVT_STATUS_SHORT && !chain) return 1; - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) + if (event->status & DEPEVT_STATUS_IOC) return 1; return 0; } -static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, - const struct dwc3_event_depevt *event, int status) +static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep, + struct dwc3_request *req, const struct dwc3_event_depevt *event, + int status) { - struct dwc3_request *req, *n; - struct dwc3_trb *trb; - bool ioc = false; - int ret = 0; + struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; + struct scatterlist *sg = req->sg; + struct scatterlist *s; + unsigned int pending = req->num_pending_sgs; + unsigned int i; + int ret = 0; - list_for_each_entry_safe(req, n, &dep->started_list, list) { - unsigned length; - int chain; + for_each_sg(sg, s, pending, i) { + trb = &dep->trb_pool[dep->trb_dequeue]; - length = req->request.length; - chain = req->num_pending_sgs > 0; - if (chain) { - struct scatterlist *sg = req->sg; - struct scatterlist *s; - unsigned int pending = req->num_pending_sgs; - unsigned int i; - - for_each_sg(sg, s, pending, i) { - trb = &dep->trb_pool[dep->trb_dequeue]; - - if (trb->ctrl & DWC3_TRB_CTRL_HWO) - break; - - req->sg = sg_next(s); - req->num_pending_sgs--; - - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status, chain); - if (ret) - break; - } - } else { - trb = &dep->trb_pool[dep->trb_dequeue]; - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status, chain); - } + if (trb->ctrl & DWC3_TRB_CTRL_HWO) + break; - if (req->unaligned || req->zero) { - trb = &dep->trb_pool[dep->trb_dequeue]; - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status, false); - req->unaligned = false; - req->zero = false; - } + req->sg = sg_next(s); + req->num_pending_sgs--; - req->request.actual = length - req->remaining; + ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req, + trb, event, status, true); + if (ret) + break; + } + + return ret; +} - if ((req->request.actual < length) && req->num_pending_sgs) - return __dwc3_gadget_kick_transfer(dep); +static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep, + struct dwc3_request *req, const struct dwc3_event_depevt *event, + int status) +{ + struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; - dwc3_gadget_giveback(dep, req, status); + return dwc3_gadget_ep_reclaim_completed_trb(dep, req, trb, + event, status, false); +} - if (ret) { - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) - ioc = true; - break; - } +static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req) +{ + return req->request.actual == req->request.length; +} + +static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, + struct dwc3_request *req, int status) +{ + int ret; + + if (req->num_pending_sgs) + ret = dwc3_gadget_ep_reclaim_trb_sg(dep, req, event, + status); + else + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, + status); + + if (req->unaligned || req->zero) { + ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, + status); + req->unaligned = false; + req->zero = false; } - /* - * Our endpoint might get disabled by another thread during - * dwc3_gadget_giveback(). If that happens, we're just gonna return 1 - * early on so DWC3_EP_BUSY flag gets cleared - */ - if (!dep->endpoint.desc) - return 1; + req->request.actual = req->request.length - req->remaining; - if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - list_empty(&dep->started_list)) { - if (list_empty(&dep->pending_list)) { - /* - * If there is no entry in request list then do - * not issue END TRANSFER now. Just set PENDING - * flag, so that END TRANSFER is issued when an - * entry is added into request list. - */ - dep->flags = DWC3_EP_PENDING_REQUEST; - } else { - dwc3_stop_active_transfer(dwc, dep->number, true); - dep->flags = DWC3_EP_ENABLED; - } - return 1; + if (!dwc3_gadget_ep_request_completed(req) && + req->num_pending_sgs) { + __dwc3_gadget_kick_transfer(dep); + goto out; } - if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && ioc) - return 0; + dwc3_gadget_giveback(dep, req, status); + +out: + return ret; +} + +static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) +{ + struct dwc3_request *req; + struct dwc3_request *tmp; + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) { + int ret; + + ret = dwc3_gadget_ep_cleanup_completed_request(dep, event, + req, status); + if (ret) + break; + } +} - return 1; +static void dwc3_gadget_endpoint_frame_from_event(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + dep->frame_number = event->parameters; } -static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, - struct dwc3_ep *dep, const struct dwc3_event_depevt *event) +static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) { + struct dwc3 *dwc = dep->dwc; unsigned status = 0; - int clean_busy; - u32 is_xfer_complete; + bool stop = false; - is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE); + dwc3_gadget_endpoint_frame_from_event(dep, event); if (event->status & DEPEVT_STATUS_BUSERR) status = -ECONNRESET; - clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status); - if (clean_busy && (!dep->endpoint.desc || is_xfer_complete || - usb_endpoint_xfer_isoc(dep->endpoint.desc))) - dep->flags &= ~DWC3_EP_BUSY; + if (event->status & DEPEVT_STATUS_MISSED_ISOC) { + status = -EXDEV; + + if (list_empty(&dep->started_list)) + stop = true; + } + + dwc3_gadget_ep_cleanup_completed_requests(dep, event, status); + + if (stop) { + dwc3_stop_active_transfer(dep, true); + dep->flags = DWC3_EP_ENABLED; + } /* * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround. @@ -2446,17 +2421,13 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc, dwc->u1u2 = 0; } +} - /* - * Our endpoint might get disabled by another thread during - * dwc3_gadget_giveback(). If that happens, we're just gonna return 1 - * early on so DWC3_EP_BUSY flag gets cleared - */ - if (!dep->endpoint.desc) - return; - - if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) - __dwc3_gadget_kick_transfer(dep); +static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + dwc3_gadget_endpoint_frame_from_event(dep, event); + __dwc3_gadget_start_isoc(dep); } static void dwc3_endpoint_interrupt(struct dwc3 *dwc, @@ -2483,32 +2454,11 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, } switch (event->endpoint_event) { - case DWC3_DEPEVT_XFERCOMPLETE: - dep->resource_index = 0; - - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - dev_err(dwc->dev, "XferComplete for Isochronous endpoint\n"); - return; - } - - dwc3_endpoint_transfer_complete(dwc, dep, event); - break; case DWC3_DEPEVT_XFERINPROGRESS: - dwc3_endpoint_transfer_complete(dwc, dep, event); + dwc3_gadget_endpoint_transfer_in_progress(dep, event); break; case DWC3_DEPEVT_XFERNOTREADY: - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) - dwc3_gadget_start_isoc(dwc, dep, event); - else - __dwc3_gadget_kick_transfer(dep); - - break; - case DWC3_DEPEVT_STREAMEVT: - if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) { - dev_err(dwc->dev, "Stream event for non-Bulk %s\n", - dep->name); - return; - } + dwc3_gadget_endpoint_transfer_not_ready(dep, event); break; case DWC3_DEPEVT_EPCMDCMPLT: cmd = DEPEVT_PARAMETER_CMD(event->parameters); @@ -2518,6 +2468,8 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, wake_up(&dep->wait_end_transfer); } break; + case DWC3_DEPEVT_STREAMEVT: + case DWC3_DEPEVT_XFERCOMPLETE: case DWC3_DEPEVT_RXTXFIFOEVT: break; } @@ -2562,15 +2514,13 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) } } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) +static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force) { - struct dwc3_ep *dep; + struct dwc3 *dwc = dep->dwc; struct dwc3_gadget_ep_cmd_params params; u32 cmd; int ret; - dep = dwc->eps[epnum]; - if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) || !dep->resource_index) return; @@ -2614,7 +2564,6 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; - dep->flags &= ~DWC3_EP_BUSY; if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) { dep->flags |= DWC3_EP_END_TRANSFER_PENDING; @@ -2816,14 +2765,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) } dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, true, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, true, false); + ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_MODIFY); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 578aa856f986..db610c56f1d6 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -98,13 +98,12 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol); * Caller should take care of locking. Returns the transfer resource * index for a given endpoint. */ -static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) +static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) { u32 res_id; res_id = dwc3_readl(dep->regs, DWC3_DEPCMD); - - return DWC3_DEPCMD_GET_RSC_IDX(res_id); + dep->resource_index = DWC3_DEPCMD_GET_RSC_IDX(res_id); } #endif /* __DRIVERS_USB_DWC3_GADGET_H */ diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index babaee981aa7..f22714cce070 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -230,17 +230,14 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, TP_fast_assign( __assign_str(name, dep->name); __entry->trb = trb; - __entry->allocated = dep->allocated_requests; - __entry->queued = dep->queued_requests; __entry->bpl = trb->bpl; __entry->bph = trb->bph; __entry->size = trb->size; __entry->ctrl = trb->ctrl; __entry->type = usb_endpoint_type(dep->endpoint.desc); ), - TP_printk("%s: %d/%d trb %p buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", - __get_str(name), __entry->queued, __entry->allocated, - __entry->trb, __entry->bph, __entry->bpl, + TP_printk("%s: trb %p buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", + __get_str(name), __entry->trb, __entry->bph, __entry->bpl, ({char *s; int pcm = ((__entry->size >> 24) & 3) + 1; switch (__entry->type) { @@ -306,7 +303,7 @@ DECLARE_EVENT_CLASS(dwc3_log_ep, __entry->trb_enqueue = dep->trb_enqueue; __entry->trb_dequeue = dep->trb_dequeue; ), - TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c%c:%c:%c", + TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c:%c:%c", __get_str(name), __entry->maxpacket, __entry->maxpacket_limit, __entry->max_streams, __entry->maxburst, __entry->trb_enqueue, @@ -314,9 +311,8 @@ DECLARE_EVENT_CLASS(dwc3_log_ep, __entry->flags & DWC3_EP_ENABLED ? 'E' : 'e', __entry->flags & DWC3_EP_STALL ? 'S' : 's', __entry->flags & DWC3_EP_WEDGE ? 'W' : 'w', - __entry->flags & DWC3_EP_BUSY ? 'B' : 'b', + __entry->flags & DWC3_EP_TRANSFER_STARTED ? 'B' : 'b', __entry->flags & DWC3_EP_PENDING_REQUEST ? 'P' : 'p', - __entry->flags & DWC3_EP_MISSED_ISOC ? 'M' : 'm', __entry->flags & DWC3_EP_END_TRANSFER_PENDING ? 'E' : 'e', __entry->direction ? '<' : '>' ) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 63a7cb87514a..f242c2bcea81 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1601,7 +1601,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) cdev->gadget->ep0->maxpacket; if (gadget_is_superspeed(gadget)) { if (gadget->speed >= USB_SPEED_SUPER) { - cdev->desc.bcdUSB = cpu_to_le16(0x0310); + cdev->desc.bcdUSB = cpu_to_le16(0x0320); cdev->desc.bMaxPacketSize0 = 9; } else { cdev->desc.bcdUSB = cpu_to_le16(0x0210); diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c index b104ed0c1ab5..6ce044008cf6 100644 --- a/drivers/usb/gadget/function/f_ecm.c +++ b/drivers/usb/gadget/function/f_ecm.c @@ -705,6 +705,8 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f) ecm_opts->bound = true; } + ecm_string_defs[1].s = ecm->ethaddr; + us = usb_gstrings_attach(cdev, ecm_strings, ARRAY_SIZE(ecm_string_defs)); if (IS_ERR(us)) @@ -928,7 +930,6 @@ static struct usb_function *ecm_alloc(struct usb_function_instance *fi) mutex_unlock(&opts->lock); return ERR_PTR(-EINVAL); } - ecm_string_defs[1].s = ecm->ethaddr; ecm->port.ioport = netdev_priv(opts->net); mutex_unlock(&opts->lock); diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 0294e4f18873..199d25700050 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1266,6 +1266,14 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code, return ret; } +#ifdef CONFIG_COMPAT +static long ffs_epfile_compat_ioctl(struct file *file, unsigned code, + unsigned long value) +{ + return ffs_epfile_ioctl(file, code, value); +} +#endif + static const struct file_operations ffs_epfile_operations = { .llseek = no_llseek, @@ -1274,6 +1282,9 @@ static const struct file_operations ffs_epfile_operations = { .read_iter = ffs_epfile_read_iter, .release = ffs_epfile_release, .unlocked_ioctl = ffs_epfile_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = ffs_epfile_compat_ioctl, +#endif }; diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index e8f35db42394..f80699747ee0 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -109,6 +109,7 @@ static inline struct f_midi *func_to_midi(struct usb_function *f) static void f_midi_transmit(struct f_midi *midi); static void f_midi_rmidi_free(struct snd_rawmidi *rmidi); +static void f_midi_free_inst(struct usb_function_instance *f); DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); @@ -1102,7 +1103,7 @@ static ssize_t f_midi_opts_##name##_store(struct config_item *item, \ u32 num; \ \ mutex_lock(&opts->lock); \ - if (opts->refcnt) { \ + if (opts->refcnt > 1) { \ ret = -EBUSY; \ goto end; \ } \ @@ -1157,7 +1158,7 @@ static ssize_t f_midi_opts_id_store(struct config_item *item, char *c; mutex_lock(&opts->lock); - if (opts->refcnt) { + if (opts->refcnt > 1) { ret = -EBUSY; goto end; } @@ -1198,13 +1199,21 @@ static const struct config_item_type midi_func_type = { static void f_midi_free_inst(struct usb_function_instance *f) { struct f_midi_opts *opts; + bool free = false; opts = container_of(f, struct f_midi_opts, func_inst); - if (opts->id_allocated) - kfree(opts->id); + mutex_lock(&opts->lock); + if (!--opts->refcnt) { + free = true; + } + mutex_unlock(&opts->lock); - kfree(opts); + if (free) { + if (opts->id_allocated) + kfree(opts->id); + kfree(opts); + } } static struct usb_function_instance *f_midi_alloc_inst(void) @@ -1223,6 +1232,7 @@ static struct usb_function_instance *f_midi_alloc_inst(void) opts->qlen = 32; opts->in_ports = 1; opts->out_ports = 1; + opts->refcnt = 1; config_group_init_type_name(&opts->func_inst.group, "", &midi_func_type); @@ -1234,6 +1244,7 @@ static void f_midi_free(struct usb_function *f) { struct f_midi *midi; struct f_midi_opts *opts; + bool free = false; midi = func_to_midi(f); opts = container_of(f->fi, struct f_midi_opts, func_inst); @@ -1242,9 +1253,12 @@ static void f_midi_free(struct usb_function *f) kfree(midi->id); kfifo_free(&midi->in_req_fifo); kfree(midi); - --opts->refcnt; + free = true; } mutex_unlock(&opts->lock); + + if (free) + f_midi_free_inst(&opts->func_inst); } static void f_midi_rmidi_free(struct snd_rawmidi *rmidi) diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index d359efe06c76..9c7ed2539ff7 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -631,19 +631,19 @@ printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) return -EAGAIN; } + list_add(&req->list, &dev->tx_reqs_active); + /* here, we unlock, and only unlock, to avoid deadlock. */ spin_unlock(&dev->lock); value = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC); spin_lock(&dev->lock); if (value) { + list_del(&req->list); list_add(&req->list, &dev->tx_reqs); spin_unlock_irqrestore(&dev->lock, flags); mutex_unlock(&dev->lock_printer_io); return -EAGAIN; } - - list_add(&req->list, &dev->tx_reqs_active); - } spin_unlock_irqrestore(&dev->lock, flags); diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 51dd3e90b06c..04c142c13075 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -851,6 +851,9 @@ int rndis_msg_parser(struct rndis_params *params, u8 *buf) */ pr_warn("%s: unknown RNDIS message 0x%08X len %d\n", __func__, MsgType, MsgLength); + /* Garbled message can be huge, so limit what we display */ + if (MsgLength > 16) + MsgLength = 16; print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET, buf, MsgLength); break; diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 6fcda62f55ea..1000d864929c 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -844,6 +844,10 @@ struct net_device *gether_setup_name_default(const char *netname) net->ethtool_ops = &ops; SET_NETDEV_DEVTYPE(net, &gadget_type); + /* MTU range: 14 - 15412 */ + net->min_mtu = ETH_HLEN; + net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + return net; } EXPORT_SYMBOL_GPL(gether_setup_name_default); diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 0875d38476ee..1df4dedffe86 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -179,7 +179,7 @@ config USB_R8A66597 config USB_RENESAS_USBHS_UDC tristate 'Renesas USBHS controller' - depends on USB_RENESAS_USBHS && HAS_DMA + depends on USB_RENESAS_USBHS help Renesas USBHS is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. @@ -192,7 +192,7 @@ config USB_RENESAS_USBHS_UDC config USB_RENESAS_USB3 tristate 'Renesas USB3.0 Peripheral controller' depends on ARCH_RENESAS || COMPILE_TEST - depends on EXTCON && HAS_DMA + depends on EXTCON help Renesas USB3.0 Peripheral controller is a USB peripheral controller that supports super, high, and full speed USB 3.0 data transfers. @@ -438,6 +438,8 @@ config USB_GADGET_XILINX dynamically linked module called "udc-xilinx" and force all gadget drivers to also be dynamically linked. +source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig" + # # LAST -- dummy/emulated controller # diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index ce865b129fd6..897f648f3cf1 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -39,4 +39,5 @@ obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o obj-$(CONFIG_USB_GR_UDC) += gr_udc.o obj-$(CONFIG_USB_GADGET_XILINX) += udc-xilinx.o obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub/ obj-$(CONFIG_USB_BDC_UDC) += bdc/ diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Kconfig b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig new file mode 100644 index 000000000000..f0cdf89b8503 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/Kconfig @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +config USB_ASPEED_VHUB + tristate "Aspeed vHub UDC driver" + depends on ARCH_ASPEED || COMPILE_TEST + help + USB peripheral controller for the Aspeed AST2500 family + SoCs supporting the "vHub" functionality and USB2.0 diff --git a/drivers/usb/gadget/udc/aspeed-vhub/Makefile b/drivers/usb/gadget/udc/aspeed-vhub/Makefile new file mode 100644 index 000000000000..9f3add605f8e --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub.o +aspeed-vhub-y := core.o ep0.o epn.o dev.o hub.o + diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c new file mode 100644 index 000000000000..db3628be38c0 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * core.c - Top level support + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + int status) +{ + bool internal = req->internal; + + EPVDBG(ep, "completing request @%p, status %d\n", req, status); + + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + + if (req->req.dma) { + if (!WARN_ON(!ep->dev)) + usb_gadget_unmap_request(&ep->dev->gadget, + &req->req, ep->epn.is_in); + req->req.dma = 0; + } + + /* + * If this isn't an internal EP0 request, call the core + * to call the gadget completion. + */ + if (!internal) { + spin_unlock(&ep->vhub->lock); + usb_gadget_giveback_request(&ep->ep, &req->req); + spin_lock(&ep->vhub->lock); + } +} + +void ast_vhub_nuke(struct ast_vhub_ep *ep, int status) +{ + struct ast_vhub_req *req; + + EPDBG(ep, "Nuking\n"); + + /* Beware, lock will be dropped & req-acquired by done() */ + while (!list_empty(&ep->queue)) { + req = list_first_entry(&ep->queue, struct ast_vhub_req, queue); + ast_vhub_done(ep, req, status); + } +} + +struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + return &req->req; +} + +void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + + kfree(req); +} + +static irqreturn_t ast_vhub_irq(int irq, void *data) +{ + struct ast_vhub *vhub = data; + irqreturn_t iret = IRQ_NONE; + u32 istat; + + /* Stale interrupt while tearing down */ + if (!vhub->ep0_bufs) + return IRQ_NONE; + + spin_lock(&vhub->lock); + + /* Read and ACK interrupts */ + istat = readl(vhub->regs + AST_VHUB_ISR); + if (!istat) + goto bail; + writel(istat, vhub->regs + AST_VHUB_ISR); + iret = IRQ_HANDLED; + + UDCVDBG(vhub, "irq status=%08x, ep_acks=%08x ep_nacks=%08x\n", + istat, + readl(vhub->regs + AST_VHUB_EP_ACK_ISR), + readl(vhub->regs + AST_VHUB_EP_NACK_ISR)); + + /* Handle generic EPs first */ + if (istat & VHUB_IRQ_EP_POOL_ACK_STALL) { + u32 i, ep_acks = readl(vhub->regs + AST_VHUB_EP_ACK_ISR); + writel(ep_acks, vhub->regs + AST_VHUB_EP_ACK_ISR); + + for (i = 0; ep_acks && i < AST_VHUB_NUM_GEN_EPs; i++) { + u32 mask = VHUB_EP_IRQ(i); + if (ep_acks & mask) { + ast_vhub_epn_ack_irq(&vhub->epns[i]); + ep_acks &= ~mask; + } + } + } + + /* Handle device interrupts */ + if (istat & (VHUB_IRQ_DEVICE1 | + VHUB_IRQ_DEVICE2 | + VHUB_IRQ_DEVICE3 | + VHUB_IRQ_DEVICE4 | + VHUB_IRQ_DEVICE5)) { + if (istat & VHUB_IRQ_DEVICE1) + ast_vhub_dev_irq(&vhub->ports[0].dev); + if (istat & VHUB_IRQ_DEVICE2) + ast_vhub_dev_irq(&vhub->ports[1].dev); + if (istat & VHUB_IRQ_DEVICE3) + ast_vhub_dev_irq(&vhub->ports[2].dev); + if (istat & VHUB_IRQ_DEVICE4) + ast_vhub_dev_irq(&vhub->ports[3].dev); + if (istat & VHUB_IRQ_DEVICE5) + ast_vhub_dev_irq(&vhub->ports[4].dev); + } + + /* Handle top-level vHub EP0 interrupts */ + if (istat & (VHUB_IRQ_HUB_EP0_OUT_ACK_STALL | + VHUB_IRQ_HUB_EP0_IN_ACK_STALL | + VHUB_IRQ_HUB_EP0_SETUP)) { + if (istat & VHUB_IRQ_HUB_EP0_IN_ACK_STALL) + ast_vhub_ep0_handle_ack(&vhub->ep0, true); + if (istat & VHUB_IRQ_HUB_EP0_OUT_ACK_STALL) + ast_vhub_ep0_handle_ack(&vhub->ep0, false); + if (istat & VHUB_IRQ_HUB_EP0_SETUP) + ast_vhub_ep0_handle_setup(&vhub->ep0); + } + + /* Various top level bus events */ + if (istat & (VHUB_IRQ_BUS_RESUME | + VHUB_IRQ_BUS_SUSPEND | + VHUB_IRQ_BUS_RESET)) { + if (istat & VHUB_IRQ_BUS_RESUME) + ast_vhub_hub_resume(vhub); + if (istat & VHUB_IRQ_BUS_SUSPEND) + ast_vhub_hub_suspend(vhub); + if (istat & VHUB_IRQ_BUS_RESET) + ast_vhub_hub_reset(vhub); + } + + bail: + spin_unlock(&vhub->lock); + return iret; +} + +void ast_vhub_init_hw(struct ast_vhub *vhub) +{ + u32 ctrl; + + UDCDBG(vhub,"(Re)Starting HW ...\n"); + + /* Enable PHY */ + ctrl = VHUB_CTRL_PHY_CLK | + VHUB_CTRL_PHY_RESET_DIS; + + /* + * We do *NOT* set the VHUB_CTRL_CLK_STOP_SUSPEND bit + * to stop the logic clock during suspend because + * it causes the registers to become inaccessible and + * we haven't yet figured out a good wayt to bring the + * controller back into life to issue a wakeup. + */ + + /* + * Set some ISO & split control bits according to Aspeed + * recommendation + * + * VHUB_CTRL_ISO_RSP_CTRL: When set tells the HW to respond + * with 0 bytes data packet to ISO IN endpoints when no data + * is available. + * + * VHUB_CTRL_SPLIT_IN: This makes a SOF complete a split IN + * transaction. + */ + ctrl |= VHUB_CTRL_ISO_RSP_CTRL | VHUB_CTRL_SPLIT_IN; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + udelay(1); + + /* Set descriptor ring size */ + if (AST_VHUB_DESCS_COUNT == 256) { + ctrl |= VHUB_CTRL_LONG_DESC; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + } else { + BUILD_BUG_ON(AST_VHUB_DESCS_COUNT != 32); + } + + /* Reset all devices */ + writel(VHUB_SW_RESET_ALL, vhub->regs + AST_VHUB_SW_RESET); + udelay(1); + writel(0, vhub->regs + AST_VHUB_SW_RESET); + + /* Disable and cleanup EP ACK/NACK interrupts */ + writel(0, vhub->regs + AST_VHUB_EP_ACK_IER); + writel(0, vhub->regs + AST_VHUB_EP_NACK_IER); + writel(VHUB_EP_IRQ_ALL, vhub->regs + AST_VHUB_EP_ACK_ISR); + writel(VHUB_EP_IRQ_ALL, vhub->regs + AST_VHUB_EP_NACK_ISR); + + /* Default settings for EP0, enable HW hub EP1 */ + writel(0, vhub->regs + AST_VHUB_EP0_CTRL); + writel(VHUB_EP1_CTRL_RESET_TOGGLE | + VHUB_EP1_CTRL_ENABLE, + vhub->regs + AST_VHUB_EP1_CTRL); + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); + + /* Configure EP0 DMA buffer */ + writel(vhub->ep0.buf_dma, vhub->regs + AST_VHUB_EP0_DATA); + + /* Clear address */ + writel(0, vhub->regs + AST_VHUB_CONF); + + /* Pullup hub (activate on host) */ + if (vhub->force_usb1) + ctrl |= VHUB_CTRL_FULL_SPEED_ONLY; + + ctrl |= VHUB_CTRL_UPSTREAM_CONNECT; + writel(ctrl, vhub->regs + AST_VHUB_CTRL); + + /* Enable some interrupts */ + writel(VHUB_IRQ_HUB_EP0_IN_ACK_STALL | + VHUB_IRQ_HUB_EP0_OUT_ACK_STALL | + VHUB_IRQ_HUB_EP0_SETUP | + VHUB_IRQ_EP_POOL_ACK_STALL | + VHUB_IRQ_BUS_RESUME | + VHUB_IRQ_BUS_SUSPEND | + VHUB_IRQ_BUS_RESET, + vhub->regs + AST_VHUB_IER); +} + +static int ast_vhub_remove(struct platform_device *pdev) +{ + struct ast_vhub *vhub = platform_get_drvdata(pdev); + unsigned long flags; + int i; + + if (!vhub || !vhub->regs) + return 0; + + /* Remove devices */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) + ast_vhub_del_dev(&vhub->ports[i].dev); + + spin_lock_irqsave(&vhub->lock, flags); + + /* Mask & ack all interrupts */ + writel(0, vhub->regs + AST_VHUB_IER); + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR); + + /* Pull device, leave PHY enabled */ + writel(VHUB_CTRL_PHY_CLK | + VHUB_CTRL_PHY_RESET_DIS, + vhub->regs + AST_VHUB_CTRL); + + if (vhub->clk) + clk_disable_unprepare(vhub->clk); + + spin_unlock_irqrestore(&vhub->lock, flags); + + if (vhub->ep0_bufs) + dma_free_coherent(&pdev->dev, + AST_VHUB_EP0_MAX_PACKET * + (AST_VHUB_NUM_PORTS + 1), + vhub->ep0_bufs, + vhub->ep0_bufs_dma); + vhub->ep0_bufs = NULL; + + return 0; +} + +static int ast_vhub_probe(struct platform_device *pdev) +{ + enum usb_device_speed max_speed; + struct ast_vhub *vhub; + struct resource *res; + int i, rc = 0; + + vhub = devm_kzalloc(&pdev->dev, sizeof(*vhub), GFP_KERNEL); + if (!vhub) + return -ENOMEM; + + spin_lock_init(&vhub->lock); + vhub->pdev = pdev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + vhub->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(vhub->regs)) { + dev_err(&pdev->dev, "Failed to map resources\n"); + return PTR_ERR(vhub->regs); + } + UDCDBG(vhub, "vHub@%pR mapped @%p\n", res, vhub->regs); + + platform_set_drvdata(pdev, vhub); + + vhub->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(vhub->clk)) { + rc = PTR_ERR(vhub->clk); + goto err; + } + rc = clk_prepare_enable(vhub->clk); + if (rc) { + dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", rc); + goto err; + } + + /* Check if we need to limit the HW to USB1 */ + max_speed = usb_get_maximum_speed(&pdev->dev); + if (max_speed != USB_SPEED_UNKNOWN && max_speed < USB_SPEED_HIGH) + vhub->force_usb1 = true; + + /* Mask & ack all interrupts before installing the handler */ + writel(0, vhub->regs + AST_VHUB_IER); + writel(VHUB_IRQ_ACK_ALL, vhub->regs + AST_VHUB_ISR); + + /* Find interrupt and install handler */ + vhub->irq = platform_get_irq(pdev, 0); + if (vhub->irq < 0) { + dev_err(&pdev->dev, "Failed to get interrupt\n"); + rc = vhub->irq; + goto err; + } + rc = devm_request_irq(&pdev->dev, vhub->irq, ast_vhub_irq, 0, + KBUILD_MODNAME, vhub); + if (rc) { + dev_err(&pdev->dev, "Failed to request interrupt\n"); + goto err; + } + + /* + * Allocate DMA buffers for all EP0s in one chunk, + * one per port and one for the vHub itself + */ + vhub->ep0_bufs = dma_alloc_coherent(&pdev->dev, + AST_VHUB_EP0_MAX_PACKET * + (AST_VHUB_NUM_PORTS + 1), + &vhub->ep0_bufs_dma, GFP_KERNEL); + if (!vhub->ep0_bufs) { + dev_err(&pdev->dev, "Failed to allocate EP0 DMA buffers\n"); + rc = -ENOMEM; + goto err; + } + UDCVDBG(vhub, "EP0 DMA buffers @%p (DMA 0x%08x)\n", + vhub->ep0_bufs, (u32)vhub->ep0_bufs_dma); + + /* Init vHub EP0 */ + ast_vhub_init_ep0(vhub, &vhub->ep0, NULL); + + /* Init devices */ + for (i = 0; i < AST_VHUB_NUM_PORTS && rc == 0; i++) + rc = ast_vhub_init_dev(vhub, i); + if (rc) + goto err; + + /* Init hub emulation */ + ast_vhub_init_hub(vhub); + + /* Initialize HW */ + ast_vhub_init_hw(vhub); + + dev_info(&pdev->dev, "Initialized virtual hub in USB%d mode\n", + vhub->force_usb1 ? 1 : 2); + + return 0; + err: + ast_vhub_remove(pdev); + return rc; +} + +static const struct of_device_id ast_vhub_dt_ids[] = { + { + .compatible = "aspeed,ast2400-usb-vhub", + }, + { + .compatible = "aspeed,ast2500-usb-vhub", + }, + { } +}; +MODULE_DEVICE_TABLE(of, ast_vhub_dt_ids); + +static struct platform_driver ast_vhub_driver = { + .probe = ast_vhub_probe, + .remove = ast_vhub_remove, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = ast_vhub_dt_ids, + }, +}; +module_platform_driver(ast_vhub_driver); + +MODULE_DESCRIPTION("Aspeed vHub udc driver"); +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c new file mode 100644 index 000000000000..f0233912bace --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -0,0 +1,589 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * dev.c - Individual device/gadget management (ie, a port = a gadget) + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "vhub.h" + +void ast_vhub_dev_irq(struct ast_vhub_dev *d) +{ + u32 istat = readl(d->regs + AST_VHUB_DEV_ISR); + + writel(istat, d->regs + AST_VHUB_DEV_ISR); + + if (istat & VHUV_DEV_IRQ_EP0_IN_ACK_STALL) + ast_vhub_ep0_handle_ack(&d->ep0, true); + if (istat & VHUV_DEV_IRQ_EP0_OUT_ACK_STALL) + ast_vhub_ep0_handle_ack(&d->ep0, false); + if (istat & VHUV_DEV_IRQ_EP0_SETUP) + ast_vhub_ep0_handle_setup(&d->ep0); +} + +static void ast_vhub_dev_enable(struct ast_vhub_dev *d) +{ + u32 reg, hmsk; + + if (d->enabled) + return; + + /* Enable device and its EP0 interrupts */ + reg = VHUB_DEV_EN_ENABLE_PORT | + VHUB_DEV_EN_EP0_IN_ACK_IRQEN | + VHUB_DEV_EN_EP0_OUT_ACK_IRQEN | + VHUB_DEV_EN_EP0_SETUP_IRQEN; + if (d->gadget.speed == USB_SPEED_HIGH) + reg |= VHUB_DEV_EN_SPEED_SEL_HIGH; + writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL); + + /* Enable device interrupt in the hub as well */ + hmsk = VHUB_IRQ_DEVICE1 << d->index; + reg = readl(d->vhub->regs + AST_VHUB_IER); + reg |= hmsk; + writel(reg, d->vhub->regs + AST_VHUB_IER); + + /* Set EP0 DMA buffer address */ + writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA); + + d->enabled = true; +} + +static void ast_vhub_dev_disable(struct ast_vhub_dev *d) +{ + u32 reg, hmsk; + + if (!d->enabled) + return; + + /* Disable device interrupt in the hub */ + hmsk = VHUB_IRQ_DEVICE1 << d->index; + reg = readl(d->vhub->regs + AST_VHUB_IER); + reg &= ~hmsk; + writel(reg, d->vhub->regs + AST_VHUB_IER); + + /* Then disable device */ + writel(0, d->regs + AST_VHUB_DEV_EN_CTRL); + d->gadget.speed = USB_SPEED_UNKNOWN; + d->enabled = false; + d->suspended = false; +} + +static int ast_vhub_dev_feature(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue, + bool is_set) +{ + DDBG(d, "%s_FEATURE(dev val=%02x)\n", + is_set ? "SET" : "CLEAR", wValue); + + if (wValue != USB_DEVICE_REMOTE_WAKEUP) + return std_req_driver; + + d->wakeup_en = is_set; + + return std_req_complete; +} + +static int ast_vhub_ep_feature(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue, bool is_set) +{ + struct ast_vhub_ep *ep; + int ep_num; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + DDBG(d, "%s_FEATURE(ep%d val=%02x)\n", + is_set ? "SET" : "CLEAR", ep_num, wValue); + if (ep_num == 0) + return std_req_complete; + if (ep_num >= AST_VHUB_NUM_GEN_EPs || !d->epns[ep_num - 1]) + return std_req_stall; + if (wValue != USB_ENDPOINT_HALT) + return std_req_driver; + + ep = d->epns[ep_num - 1]; + if (WARN_ON(!ep)) + return std_req_stall; + + if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso || + ep->epn.is_in != !!(wIndex & USB_DIR_IN)) + return std_req_stall; + + DDBG(d, "%s stall on EP %d\n", + is_set ? "setting" : "clearing", ep_num); + ep->epn.stalled = is_set; + ast_vhub_update_epn_stall(ep); + + return std_req_complete; +} + +static int ast_vhub_dev_status(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue) +{ + u8 st0; + + DDBG(d, "GET_STATUS(dev)\n"); + + st0 = d->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED; + if (d->wakeup_en) + st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; + + return ast_vhub_simple_reply(&d->ep0, st0, 0); +} + +static int ast_vhub_ep_status(struct ast_vhub_dev *d, + u16 wIndex, u16 wValue) +{ + int ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + struct ast_vhub_ep *ep; + u8 st0 = 0; + + DDBG(d, "GET_STATUS(ep%d)\n", ep_num); + + if (ep_num >= AST_VHUB_NUM_GEN_EPs) + return std_req_stall; + if (ep_num != 0) { + ep = d->epns[ep_num - 1]; + if (!ep) + return std_req_stall; + if (!ep->epn.enabled || !ep->ep.desc || ep->epn.is_iso || + ep->epn.is_in != !!(wIndex & USB_DIR_IN)) + return std_req_stall; + if (ep->epn.stalled) + st0 |= 1 << USB_ENDPOINT_HALT; + } + + return ast_vhub_simple_reply(&d->ep0, st0, 0); +} + +static void ast_vhub_dev_set_address(struct ast_vhub_dev *d, u8 addr) +{ + u32 reg; + + DDBG(d, "SET_ADDRESS: Got address %x\n", addr); + + reg = readl(d->regs + AST_VHUB_DEV_EN_CTRL); + reg &= ~VHUB_DEV_EN_ADDR_MASK; + reg |= VHUB_DEV_EN_SET_ADDR(addr); + writel(reg, d->regs + AST_VHUB_DEV_EN_CTRL); +} + +int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + struct ast_vhub_dev *d = ep->dev; + u16 wValue, wIndex; + + /* No driver, we shouldn't be enabled ... */ + if (!d->driver || !d->enabled || d->suspended) { + EPDBG(ep, + "Device is wrong state driver=%p enabled=%d" + " suspended=%d\n", + d->driver, d->enabled, d->suspended); + return std_req_stall; + } + + /* First packet, grab speed */ + if (d->gadget.speed == USB_SPEED_UNKNOWN) { + d->gadget.speed = ep->vhub->speed; + if (d->gadget.speed > d->driver->max_speed) + d->gadget.speed = d->driver->max_speed; + DDBG(d, "fist packet, captured speed %d\n", + d->gadget.speed); + } + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + + switch ((crq->bRequestType << 8) | crq->bRequest) { + /* SET_ADDRESS */ + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + ast_vhub_dev_set_address(d, wValue); + return std_req_complete; + + /* GET_STATUS */ + case DeviceRequest | USB_REQ_GET_STATUS: + return ast_vhub_dev_status(d, wIndex, wValue); + case InterfaceRequest | USB_REQ_GET_STATUS: + return ast_vhub_simple_reply(ep, 0, 0); + case EndpointRequest | USB_REQ_GET_STATUS: + return ast_vhub_ep_status(d, wIndex, wValue); + + /* SET/CLEAR_FEATURE */ + case DeviceOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_dev_feature(d, wIndex, wValue, true); + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_dev_feature(d, wIndex, wValue, false); + case EndpointOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_ep_feature(d, wIndex, wValue, true); + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_ep_feature(d, wIndex, wValue, false); + } + return std_req_driver; +} + +static int ast_vhub_udc_wakeup(struct usb_gadget* gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&d->vhub->lock, flags); + if (!d->wakeup_en) + goto err; + + DDBG(d, "Device initiated wakeup\n"); + + /* Wakeup the host */ + ast_vhub_hub_wake_all(d->vhub); + rc = 0; + err: + spin_unlock_irqrestore(&d->vhub->lock, flags); + return rc; +} + +static int ast_vhub_udc_get_frame(struct usb_gadget* gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + + return (readl(d->vhub->regs + AST_VHUB_USBSTS) >> 16) & 0x7ff; +} + +static void ast_vhub_dev_nuke(struct ast_vhub_dev *d) +{ + unsigned int i; + + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) { + if (!d->epns[i]) + continue; + ast_vhub_nuke(d->epns[i], -ESHUTDOWN); + } +} + +static int ast_vhub_udc_pullup(struct usb_gadget* gadget, int on) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "pullup(%d)\n", on); + + /* Mark disconnected in the hub */ + ast_vhub_device_connect(d->vhub, d->index, on); + + /* + * If enabled, nuke all requests if any (there shouldn't be) + * and disable the port. This will clear the address too. + */ + if (d->enabled) { + ast_vhub_dev_nuke(d); + ast_vhub_dev_disable(d); + } + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static int ast_vhub_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "start\n"); + + /* We don't do much more until the hub enables us */ + d->driver = driver; + d->gadget.is_selfpowered = 1; + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static struct usb_ep *ast_vhub_udc_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ss) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + struct ast_vhub_ep *ep; + struct usb_ep *u_ep; + unsigned int max, addr, i; + + DDBG(d, "Match EP type %d\n", usb_endpoint_type(desc)); + + /* + * First we need to look for an existing unclaimed EP as another + * configuration may have already associated a bunch of EPs with + * this gadget. This duplicates the code in usb_ep_autoconfig_ss() + * unfortunately. + */ + list_for_each_entry(u_ep, &gadget->ep_list, ep_list) { + if (usb_gadget_ep_match_desc(gadget, u_ep, desc, ss)) { + DDBG(d, " -> using existing EP%d\n", + to_ast_ep(u_ep)->d_idx); + return u_ep; + } + } + + /* + * We didn't find one, we need to grab one from the pool. + * + * First let's do some sanity checking + */ + switch(usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + /* Only EP0 can be a control endpoint */ + return NULL; + case USB_ENDPOINT_XFER_ISOC: + /* ISO: limit 1023 bytes full speed, 1024 high/super speed */ + if (gadget_is_dualspeed(gadget)) + max = 1024; + else + max = 1023; + break; + case USB_ENDPOINT_XFER_BULK: + if (gadget_is_dualspeed(gadget)) + max = 512; + else + max = 64; + break; + case USB_ENDPOINT_XFER_INT: + if (gadget_is_dualspeed(gadget)) + max = 1024; + else + max = 64; + break; + } + if (usb_endpoint_maxp(desc) > max) + return NULL; + + /* + * Find a free EP address for that device. We can't + * let the generic code assign these as it would + * create overlapping numbers for IN and OUT which + * we don't support, so also create a suitable name + * that will allow the generic code to use our + * assigned address. + */ + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) + if (d->epns[i] == NULL) + break; + if (i >= AST_VHUB_NUM_GEN_EPs) + return NULL; + addr = i + 1; + + /* + * Now grab an EP from the shared pool and associate + * it with our device + */ + ep = ast_vhub_alloc_epn(d, addr); + if (!ep) + return NULL; + DDBG(d, "Allocated epn#%d for port EP%d\n", + ep->epn.g_idx, addr); + + return &ep->ep; +} + +static int ast_vhub_udc_stop(struct usb_gadget *gadget) +{ + struct ast_vhub_dev *d = to_ast_dev(gadget); + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + + DDBG(d, "stop\n"); + + d->driver = NULL; + d->gadget.speed = USB_SPEED_UNKNOWN; + + ast_vhub_dev_nuke(d); + + if (d->enabled) + ast_vhub_dev_disable(d); + + spin_unlock_irqrestore(&d->vhub->lock, flags); + + return 0; +} + +static struct usb_gadget_ops ast_vhub_udc_ops = { + .get_frame = ast_vhub_udc_get_frame, + .wakeup = ast_vhub_udc_wakeup, + .pullup = ast_vhub_udc_pullup, + .udc_start = ast_vhub_udc_start, + .udc_stop = ast_vhub_udc_stop, + .match_ep = ast_vhub_udc_match_ep, +}; + +void ast_vhub_dev_suspend(struct ast_vhub_dev *d) +{ + d->suspended = true; + if (d->driver) { + spin_unlock(&d->vhub->lock); + d->driver->suspend(&d->gadget); + spin_lock(&d->vhub->lock); + } +} + +void ast_vhub_dev_resume(struct ast_vhub_dev *d) +{ + d->suspended = false; + if (d->driver) { + spin_unlock(&d->vhub->lock); + d->driver->resume(&d->gadget); + spin_lock(&d->vhub->lock); + } +} + +void ast_vhub_dev_reset(struct ast_vhub_dev *d) +{ + /* + * If speed is not set, we enable the port. If it is, + * send reset to the gadget and reset "speed". + * + * Speed is an indication that we have got the first + * setup packet to the device. + */ + if (d->gadget.speed == USB_SPEED_UNKNOWN && !d->enabled) { + DDBG(d, "Reset at unknown speed of disabled device, enabling...\n"); + ast_vhub_dev_enable(d); + d->suspended = false; + } + if (d->gadget.speed != USB_SPEED_UNKNOWN && d->driver) { + unsigned int i; + + DDBG(d, "Reset at known speed of bound device, resetting...\n"); + spin_unlock(&d->vhub->lock); + d->driver->reset(&d->gadget); + spin_lock(&d->vhub->lock); + + /* + * Disable/re-enable HW, this will clear the address + * and speed setting. + */ + ast_vhub_dev_disable(d); + ast_vhub_dev_enable(d); + + /* Clear stall on all EPs */ + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) { + struct ast_vhub_ep *ep = d->epns[i]; + + if (ep && ep->epn.stalled) { + ep->epn.stalled = false; + ast_vhub_update_epn_stall(ep); + } + } + + /* Additional cleanups */ + d->wakeup_en = false; + d->suspended = false; + } +} + +void ast_vhub_del_dev(struct ast_vhub_dev *d) +{ + unsigned long flags; + + spin_lock_irqsave(&d->vhub->lock, flags); + if (!d->registered) { + spin_unlock_irqrestore(&d->vhub->lock, flags); + return; + } + d->registered = false; + spin_unlock_irqrestore(&d->vhub->lock, flags); + + usb_del_gadget_udc(&d->gadget); + device_unregister(d->port_dev); +} + +static void ast_vhub_dev_release(struct device *dev) +{ + kfree(dev); +} + +int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx) +{ + struct ast_vhub_dev *d = &vhub->ports[idx].dev; + struct device *parent = &vhub->pdev->dev; + int rc; + + d->vhub = vhub; + d->index = idx; + d->name = devm_kasprintf(parent, GFP_KERNEL, "port%d", idx+1); + d->regs = vhub->regs + 0x100 + 0x10 * idx; + + ast_vhub_init_ep0(vhub, &d->ep0, d); + + /* + * The UDC core really needs us to have separate and uniquely + * named "parent" devices for each port so we create a sub device + * here for that purpose + */ + d->port_dev = kzalloc(sizeof(struct device), GFP_KERNEL); + if (!d->port_dev) + return -ENOMEM; + device_initialize(d->port_dev); + d->port_dev->release = ast_vhub_dev_release; + d->port_dev->parent = parent; + dev_set_name(d->port_dev, "%s:p%d", dev_name(parent), idx + 1); + rc = device_add(d->port_dev); + if (rc) + goto fail_add; + + /* Populate gadget */ + INIT_LIST_HEAD(&d->gadget.ep_list); + d->gadget.ops = &ast_vhub_udc_ops; + d->gadget.ep0 = &d->ep0.ep; + d->gadget.name = KBUILD_MODNAME; + if (vhub->force_usb1) + d->gadget.max_speed = USB_SPEED_FULL; + else + d->gadget.max_speed = USB_SPEED_HIGH; + d->gadget.speed = USB_SPEED_UNKNOWN; + d->gadget.dev.of_node = vhub->pdev->dev.of_node; + + rc = usb_add_gadget_udc(d->port_dev, &d->gadget); + if (rc != 0) + goto fail_udc; + d->registered = true; + + return 0; + fail_udc: + device_del(d->port_dev); + fail_add: + put_device(d->port_dev); + + return rc; +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c new file mode 100644 index 000000000000..20ffb03ff6ac --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c @@ -0,0 +1,486 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * ep0.c - Endpoint 0 handling + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len) +{ + struct usb_request *req = &ep->ep0.req.req; + int rc; + + if (WARN_ON(ep->d_idx != 0)) + return std_req_stall; + if (WARN_ON(!ep->ep0.dir_in)) + return std_req_stall; + if (WARN_ON(len > AST_VHUB_EP0_MAX_PACKET)) + return std_req_stall; + if (WARN_ON(req->status == -EINPROGRESS)) + return std_req_stall; + + req->buf = ptr; + req->length = len; + req->complete = NULL; + req->zero = true; + + /* + * Call internal queue directly after dropping the lock. This is + * safe to do as the reply is always the last thing done when + * processing a SETUP packet, usually as a tail call + */ + spin_unlock(&ep->vhub->lock); + if (ep->ep.ops->queue(&ep->ep, req, GFP_ATOMIC)) + rc = std_req_stall; + else + rc = std_req_data; + spin_lock(&ep->vhub->lock); + return rc; +} + +int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...) +{ + u8 *buffer = ep->buf; + unsigned int i; + va_list args; + + va_start(args, len); + + /* Copy data directly into EP buffer */ + for (i = 0; i < len; i++) + buffer[i] = va_arg(args, int); + va_end(args); + + /* req->buf NULL means data is already there */ + return ast_vhub_reply(ep, NULL, len); +} + +void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep) +{ + struct usb_ctrlrequest crq; + enum std_req_rc std_req_rc; + int rc = -ENODEV; + + if (WARN_ON(ep->d_idx != 0)) + return; + + /* + * Grab the setup packet from the chip and byteswap + * interesting fields + */ + memcpy_fromio(&crq, ep->ep0.setup, sizeof(crq)); + + EPDBG(ep, "SETUP packet %02x/%02x/%04x/%04x/%04x [%s] st=%d\n", + crq.bRequestType, crq.bRequest, + le16_to_cpu(crq.wValue), + le16_to_cpu(crq.wIndex), + le16_to_cpu(crq.wLength), + (crq.bRequestType & USB_DIR_IN) ? "in" : "out", + ep->ep0.state); + + /* Check our state, cancel pending requests if needed */ + if (ep->ep0.state != ep0_state_token) { + EPDBG(ep, "wrong state\n"); + ast_vhub_nuke(ep, 0); + goto stall; + } + + /* Calculate next state for EP0 */ + ep->ep0.state = ep0_state_data; + ep->ep0.dir_in = !!(crq.bRequestType & USB_DIR_IN); + + /* If this is the vHub, we handle requests differently */ + std_req_rc = std_req_driver; + if (ep->dev == NULL) { + if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + std_req_rc = ast_vhub_std_hub_request(ep, &crq); + else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) + std_req_rc = ast_vhub_class_hub_request(ep, &crq); + else + std_req_rc = std_req_stall; + } else if ((crq.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + std_req_rc = ast_vhub_std_dev_request(ep, &crq); + + /* Act upon result */ + switch(std_req_rc) { + case std_req_complete: + goto complete; + case std_req_stall: + goto stall; + case std_req_driver: + break; + case std_req_data: + return; + } + + /* Pass request up to the gadget driver */ + if (WARN_ON(!ep->dev)) + goto stall; + if (ep->dev->driver) { + EPDBG(ep, "forwarding to gadget...\n"); + spin_unlock(&ep->vhub->lock); + rc = ep->dev->driver->setup(&ep->dev->gadget, &crq); + spin_lock(&ep->vhub->lock); + EPDBG(ep, "driver returned %d\n", rc); + } else { + EPDBG(ep, "no gadget for request !\n"); + } + if (rc >= 0) + return; + + stall: + EPDBG(ep, "stalling\n"); + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; + return; + + complete: + EPVDBG(ep, "sending [in] status with no data\n"); + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; +} + + +static void ast_vhub_ep0_do_send(struct ast_vhub_ep *ep, + struct ast_vhub_req *req) +{ + unsigned int chunk; + u32 reg; + + /* If this is a 0-length request, it's the gadget trying to + * send a status on our behalf. We take it from here. + */ + if (req->req.length == 0) + req->last_desc = 1; + + /* Are we done ? Complete request, otherwise wait for next interrupt */ + if (req->last_desc >= 0) { + EPVDBG(ep, "complete send %d/%d\n", + req->req.actual, req->req.length); + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, 0); + return; + } + + /* + * Next chunk cropped to max packet size. Also check if this + * is the last packet + */ + chunk = req->req.length - req->req.actual; + if (chunk > ep->ep.maxpacket) + chunk = ep->ep.maxpacket; + else if ((chunk < ep->ep.maxpacket) || !req->req.zero) + req->last_desc = 1; + + EPVDBG(ep, "send chunk=%d last=%d, req->act=%d mp=%d\n", + chunk, req->last_desc, req->req.actual, ep->ep.maxpacket); + + /* + * Copy data if any (internal requests already have data + * in the EP buffer) + */ + if (chunk && req->req.buf) + memcpy(ep->buf, req->req.buf + req->req.actual, chunk); + + /* Remember chunk size and trigger send */ + reg = VHUB_EP0_SET_TX_LEN(chunk); + writel(reg, ep->ep0.ctlstat); + writel(reg | VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + req->req.actual += chunk; +} + +static void ast_vhub_ep0_rx_prime(struct ast_vhub_ep *ep) +{ + EPVDBG(ep, "rx prime\n"); + + /* Prime endpoint for receiving data */ + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat + AST_VHUB_EP0_CTRL); +} + +static void ast_vhub_ep0_do_receive(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + unsigned int len) +{ + unsigned int remain; + int rc = 0; + + /* We are receiving... grab request */ + remain = req->req.length - req->req.actual; + + EPVDBG(ep, "receive got=%d remain=%d\n", len, remain); + + /* Are we getting more than asked ? */ + if (len > remain) { + EPDBG(ep, "receiving too much (ovf: %d) !\n", + len - remain); + len = remain; + rc = -EOVERFLOW; + } + if (len && req->req.buf) + memcpy(req->req.buf + req->req.actual, ep->buf, len); + req->req.actual += len; + + /* Done ? */ + if (len < ep->ep.maxpacket || len == remain) { + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, rc); + } else + ast_vhub_ep0_rx_prime(ep); +} + +void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack) +{ + struct ast_vhub_req *req; + struct ast_vhub *vhub = ep->vhub; + struct device *dev = &vhub->pdev->dev; + bool stall = false; + u32 stat; + + /* Read EP0 status */ + stat = readl(ep->ep0.ctlstat); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x,state=%d is_in=%d in_ack=%d req=%p\n", + stat, ep->ep0.state, ep->ep0.dir_in, in_ack, req); + + switch(ep->ep0.state) { + case ep0_state_token: + /* There should be no request queued in that state... */ + if (req) { + dev_warn(dev, "request present while in TOKEN state\n"); + ast_vhub_nuke(ep, -EINVAL); + } + dev_warn(dev, "ack while in TOKEN state\n"); + stall = true; + break; + case ep0_state_data: + /* Check the state bits corresponding to our direction */ + if ((ep->ep0.dir_in && (stat & VHUB_EP0_TX_BUFF_RDY)) || + (!ep->ep0.dir_in && (stat & VHUB_EP0_RX_BUFF_RDY)) || + (ep->ep0.dir_in != in_ack)) { + dev_warn(dev, "irq state mismatch"); + stall = true; + break; + } + /* + * We are in data phase and there's no request, something is + * wrong, stall + */ + if (!req) { + dev_warn(dev, "data phase, no request\n"); + stall = true; + break; + } + + /* We have a request, handle data transfers */ + if (ep->ep0.dir_in) + ast_vhub_ep0_do_send(ep, req); + else + ast_vhub_ep0_do_receive(ep, req, VHUB_EP0_RX_LEN(stat)); + return; + case ep0_state_status: + /* Nuke stale requests */ + if (req) { + dev_warn(dev, "request present while in STATUS state\n"); + ast_vhub_nuke(ep, -EINVAL); + } + + /* + * If the status phase completes with the wrong ack, stall + * the endpoint just in case, to abort whatever the host + * was doing. + */ + if (ep->ep0.dir_in == in_ack) { + dev_warn(dev, "status direction mismatch\n"); + stall = true; + } + } + + /* Reset to token state */ + ep->ep0.state = ep0_state_token; + if (stall) + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); +} + +static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct device *dev = &vhub->pdev->dev; + unsigned long flags; + + /* Paranoid cheks */ + if (!u_req || (!u_req->complete && !req->internal)) { + dev_warn(dev, "Bogus EP0 request ! u_req=%p\n", u_req); + if (u_req) { + dev_warn(dev, "complete=%p internal=%d\n", + u_req->complete, req->internal); + } + return -EINVAL; + } + + /* Not endpoint 0 ? */ + if (WARN_ON(ep->d_idx != 0)) + return -EINVAL; + + /* Disabled device */ + if (ep->dev && (!ep->dev->enabled || ep->dev->suspended)) + return -ESHUTDOWN; + + /* Data, no buffer and not internal ? */ + if (u_req->length && !u_req->buf && !req->internal) { + dev_warn(dev, "Request with no buffer !\n"); + return -EINVAL; + } + + EPVDBG(ep, "enqueue req @%p\n", req); + EPVDBG(ep, " l=%d zero=%d noshort=%d is_in=%d\n", + u_req->length, u_req->zero, + u_req->short_not_ok, ep->ep0.dir_in); + + /* Initialize request progress fields */ + u_req->status = -EINPROGRESS; + u_req->actual = 0; + req->last_desc = -1; + req->active = false; + + spin_lock_irqsave(&vhub->lock, flags); + + /* EP0 can only support a single request at a time */ + if (!list_empty(&ep->queue) || ep->ep0.state == ep0_state_token) { + dev_warn(dev, "EP0: Request in wrong state\n"); + spin_unlock_irqrestore(&vhub->lock, flags); + return -EBUSY; + } + + /* Add request to list and kick processing if empty */ + list_add_tail(&req->queue, &ep->queue); + + if (ep->ep0.dir_in) { + /* IN request, send data */ + ast_vhub_ep0_do_send(ep, req); + } else if (u_req->length == 0) { + /* 0-len request, send completion as rx */ + EPVDBG(ep, "0-length rx completion\n"); + ep->ep0.state = ep0_state_status; + writel(VHUB_EP0_TX_BUFF_RDY, ep->ep0.ctlstat); + ast_vhub_done(ep, req, 0); + } else { + /* OUT request, start receiver */ + ast_vhub_ep0_rx_prime(ep); + } + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_ep0_dequeue(struct usb_ep* u_ep, struct usb_request *u_req) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_req *req; + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Only one request can be in the queue */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + /* Is it ours ? */ + if (req && u_req == &req->req) { + EPVDBG(ep, "dequeue req @%p\n", req); + + /* + * We don't have to deal with "active" as all + * DMAs go to the EP buffers, not the request. + */ + ast_vhub_done(ep, req, -ECONNRESET); + + /* We do stall the EP to clean things up in HW */ + writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_status; + ep->ep0.dir_in = false; + rc = 0; + } + spin_unlock_irqrestore(&vhub->lock, flags); + return rc; +} + + +static const struct usb_ep_ops ast_vhub_ep0_ops = { + .queue = ast_vhub_ep0_queue, + .dequeue = ast_vhub_ep0_dequeue, + .alloc_request = ast_vhub_alloc_request, + .free_request = ast_vhub_free_request, +}; + +void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, + struct ast_vhub_dev *dev) +{ + memset(ep, 0, sizeof(*ep)); + + INIT_LIST_HEAD(&ep->ep.ep_list); + INIT_LIST_HEAD(&ep->queue); + ep->ep.ops = &ast_vhub_ep0_ops; + ep->ep.name = "ep0"; + ep->ep.caps.type_control = true; + usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EP0_MAX_PACKET); + ep->d_idx = 0; + ep->dev = dev; + ep->vhub = vhub; + ep->ep0.state = ep0_state_token; + INIT_LIST_HEAD(&ep->ep0.req.queue); + ep->ep0.req.internal = true; + + /* Small difference between vHub and devices */ + if (dev) { + ep->ep0.ctlstat = dev->regs + AST_VHUB_DEV_EP0_CTRL; + ep->ep0.setup = vhub->regs + + AST_VHUB_SETUP0 + 8 * (dev->index + 1); + ep->buf = vhub->ep0_bufs + + AST_VHUB_EP0_MAX_PACKET * (dev->index + 1); + ep->buf_dma = vhub->ep0_bufs_dma + + AST_VHUB_EP0_MAX_PACKET * (dev->index + 1); + } else { + ep->ep0.ctlstat = vhub->regs + AST_VHUB_EP0_CTRL; + ep->ep0.setup = vhub->regs + AST_VHUB_SETUP0; + ep->buf = vhub->ep0_bufs; + ep->buf_dma = vhub->ep0_bufs_dma; + } +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c new file mode 100644 index 000000000000..80c9feac5147 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * epn.c - Generic endpoints management + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> + +#include "vhub.h" + +#define EXTRA_CHECKS + +#ifdef EXTRA_CHECKS +#define CHECK(ep, expr, fmt...) \ + do { \ + if (!(expr)) EPDBG(ep, "CHECK:" fmt); \ + } while(0) +#else +#define CHECK(ep, expr, fmt...) do { } while(0) +#endif + +static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req) +{ + unsigned int act = req->req.actual; + unsigned int len = req->req.length; + unsigned int chunk; + + /* There should be no DMA ongoing */ + WARN_ON(req->active); + + /* Calculate next chunk size */ + chunk = len - act; + if (chunk > ep->ep.maxpacket) + chunk = ep->ep.maxpacket; + else if ((chunk < ep->ep.maxpacket) || !req->req.zero) + req->last_desc = 1; + + EPVDBG(ep, "kick req %p act=%d/%d chunk=%d last=%d\n", + req, act, len, chunk, req->last_desc); + + /* If DMA unavailable, using staging EP buffer */ + if (!req->req.dma) { + + /* For IN transfers, copy data over first */ + if (ep->epn.is_in) + memcpy(ep->buf, req->req.buf + act, chunk); + writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + } else + writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + + /* Start DMA */ + req->active = true; + writel(VHUB_EP_DMA_SET_TX_SIZE(chunk), + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + writel(VHUB_EP_DMA_SET_TX_SIZE(chunk) | VHUB_EP_DMA_SINGLE_KICK, + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); +} + +static void ast_vhub_epn_handle_ack(struct ast_vhub_ep *ep) +{ + struct ast_vhub_req *req; + unsigned int len; + u32 stat; + + /* Read EP status */ + stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x is_in=%d, req=%p (active=%d)\n", + stat, ep->epn.is_in, req, req ? req->active : 0); + + /* In absence of a request, bail out, must have been dequeued */ + if (!req) + return; + + /* + * Request not active, move on to processing queue, active request + * was probably dequeued + */ + if (!req->active) + goto next_chunk; + + /* Check if HW has moved on */ + if (VHUB_EP_DMA_RPTR(stat) != 0) { + EPDBG(ep, "DMA read pointer not 0 !\n"); + return; + } + + /* No current DMA ongoing */ + req->active = false; + + /* Grab lenght out of HW */ + len = VHUB_EP_DMA_TX_SIZE(stat); + + /* If not using DMA, copy data out if needed */ + if (!req->req.dma && !ep->epn.is_in && len) + memcpy(req->req.buf + req->req.actual, ep->buf, len); + + /* Adjust size */ + req->req.actual += len; + + /* Check for short packet */ + if (len < ep->ep.maxpacket) + req->last_desc = 1; + + /* That's it ? complete the request and pick a new one */ + if (req->last_desc >= 0) { + ast_vhub_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, + queue); + + /* + * Due to lock dropping inside "done" the next request could + * already be active, so check for that and bail if needed. + */ + if (!req || req->active) + return; + } + + next_chunk: + ast_vhub_epn_kick(ep, req); +} + +static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep) +{ + /* + * d_next == d_last means descriptor list empty to HW, + * thus we can only have AST_VHUB_DESCS_COUNT-1 descriptors + * in the list + */ + return (ep->epn.d_last + AST_VHUB_DESCS_COUNT - ep->epn.d_next - 1) & + (AST_VHUB_DESCS_COUNT - 1); +} + +static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, + struct ast_vhub_req *req) +{ + unsigned int act = req->act_count; + unsigned int len = req->req.length; + unsigned int chunk; + + /* Mark request active if not already */ + req->active = true; + + /* If the request was already completely written, do nothing */ + if (req->last_desc >= 0) + return; + + EPVDBG(ep, "kick act=%d/%d chunk_max=%d free_descs=%d\n", + act, len, ep->epn.chunk_max, ast_vhub_count_free_descs(ep)); + + /* While we can create descriptors */ + while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) { + struct ast_vhub_desc *desc; + unsigned int d_num; + + /* Grab next free descriptor */ + d_num = ep->epn.d_next; + desc = &ep->epn.descs[d_num]; + ep->epn.d_next = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); + + /* Calculate next chunk size */ + chunk = len - act; + if (chunk <= ep->epn.chunk_max) { + /* + * Is this the last packet ? Because of having up to 8 + * packets in a descriptor we can't just compare "chunk" + * with ep.maxpacket. We have to see if it's a multiple + * of it to know if we have to send a zero packet. + * Sadly that involves a modulo which is a bit expensive + * but probably still better than not doing it. + */ + if (!chunk || !req->req.zero || (chunk % ep->ep.maxpacket) != 0) + req->last_desc = d_num; + } else { + chunk = ep->epn.chunk_max; + } + + EPVDBG(ep, " chunk: act=%d/%d chunk=%d last=%d desc=%d free=%d\n", + act, len, chunk, req->last_desc, d_num, + ast_vhub_count_free_descs(ep)); + + /* Populate descriptor */ + desc->w0 = cpu_to_le32(req->req.dma + act); + + /* Interrupt if end of request or no more descriptors */ + + /* + * TODO: Be smarter about it, if we don't have enough + * descriptors request an interrupt before queue empty + * or so in order to be able to populate more before + * the HW runs out. This isn't a problem at the moment + * as we use 256 descriptors and only put at most one + * request in the ring. + */ + desc->w1 = cpu_to_le32(VHUB_DSC1_IN_SET_LEN(chunk)); + if (req->last_desc >= 0 || !ast_vhub_count_free_descs(ep)) + desc->w1 |= cpu_to_le32(VHUB_DSC1_IN_INTERRUPT); + + /* Account packet */ + req->act_count = act = act + chunk; + } + + /* Tell HW about new descriptors */ + writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next), + ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + EPVDBG(ep, "HW kicked, d_next=%d dstat=%08x\n", + ep->epn.d_next, readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS)); +} + +static void ast_vhub_epn_handle_ack_desc(struct ast_vhub_ep *ep) +{ + struct ast_vhub_req *req; + unsigned int len, d_last; + u32 stat, stat1; + + /* Read EP status, workaround HW race */ + do { + stat = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + stat1 = readl(ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + } while(stat != stat1); + + /* Extract RPTR */ + d_last = VHUB_EP_DMA_RPTR(stat); + + /* Grab current request if any */ + req = list_first_entry_or_null(&ep->queue, struct ast_vhub_req, queue); + + EPVDBG(ep, "ACK status=%08x is_in=%d ep->d_last=%d..%d\n", + stat, ep->epn.is_in, ep->epn.d_last, d_last); + + /* Check all completed descriptors */ + while (ep->epn.d_last != d_last) { + struct ast_vhub_desc *desc; + unsigned int d_num; + bool is_last_desc; + + /* Grab next completed descriptor */ + d_num = ep->epn.d_last; + desc = &ep->epn.descs[d_num]; + ep->epn.d_last = (d_num + 1) & (AST_VHUB_DESCS_COUNT - 1); + + /* Grab len out of descriptor */ + len = VHUB_DSC1_IN_LEN(le32_to_cpu(desc->w1)); + + EPVDBG(ep, " desc %d len=%d req=%p (act=%d)\n", + d_num, len, req, req ? req->active : 0); + + /* If no active request pending, move on */ + if (!req || !req->active) + continue; + + /* Adjust size */ + req->req.actual += len; + + /* Is that the last chunk ? */ + is_last_desc = req->last_desc == d_num; + CHECK(ep, is_last_desc == (len < ep->ep.maxpacket || + (req->req.actual >= req->req.length && + !req->req.zero)), + "Last packet discrepancy: last_desc=%d len=%d r.act=%d " + "r.len=%d r.zero=%d mp=%d\n", + is_last_desc, len, req->req.actual, req->req.length, + req->req.zero, ep->ep.maxpacket); + + if (is_last_desc) { + /* + * Because we can only have one request at a time + * in our descriptor list in this implementation, + * d_last and ep->d_last should now be equal + */ + CHECK(ep, d_last == ep->epn.d_last, + "DMA read ptr mismatch %d vs %d\n", + d_last, ep->epn.d_last); + + /* Note: done will drop and re-acquire the lock */ + ast_vhub_done(ep, req, 0); + req = list_first_entry_or_null(&ep->queue, + struct ast_vhub_req, + queue); + break; + } + } + + /* More work ? */ + if (req) + ast_vhub_epn_kick_desc(ep, req); +} + +void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep) +{ + if (ep->epn.desc_mode) + ast_vhub_epn_handle_ack_desc(ep); + else + ast_vhub_epn_handle_ack(ep); +} + +static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req, + gfp_t gfp_flags) +{ + struct ast_vhub_req *req = to_ast_req(u_req); + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + bool empty; + int rc; + + /* Paranoid checks */ + if (!u_req || !u_req->complete || !u_req->buf) { + dev_warn(&vhub->pdev->dev, "Bogus EPn request ! u_req=%p\n", u_req); + if (u_req) { + dev_warn(&vhub->pdev->dev, "complete=%p internal=%d\n", + u_req->complete, req->internal); + } + return -EINVAL; + } + + /* Endpoint enabled ? */ + if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx || + !ep->dev->enabled || ep->dev->suspended) { + EPDBG(ep,"Enqueing request on wrong or disabled EP\n"); + return -ESHUTDOWN; + } + + /* Map request for DMA if possible. For now, the rule for DMA is + * that: + * + * * For single stage mode (no descriptors): + * + * - The buffer is aligned to a 8 bytes boundary (HW requirement) + * - For a OUT endpoint, the request size is a multiple of the EP + * packet size (otherwise the controller will DMA past the end + * of the buffer if the host is sending a too long packet). + * + * * For descriptor mode (tx only for now), always. + * + * We could relax the latter by making the decision to use the bounce + * buffer based on the size of a given *segment* of the request rather + * than the whole request. + */ + if (ep->epn.desc_mode || + ((((unsigned long)u_req->buf & 7) == 0) && + (ep->epn.is_in || !(u_req->length & (u_ep->maxpacket - 1))))) { + rc = usb_gadget_map_request(&ep->dev->gadget, u_req, + ep->epn.is_in); + if (rc) { + dev_warn(&vhub->pdev->dev, + "Request mapping failure %d\n", rc); + return rc; + } + } else + u_req->dma = 0; + + EPVDBG(ep, "enqueue req @%p\n", req); + EPVDBG(ep, " l=%d dma=0x%x zero=%d noshort=%d noirq=%d is_in=%d\n", + u_req->length, (u32)u_req->dma, u_req->zero, + u_req->short_not_ok, u_req->no_interrupt, + ep->epn.is_in); + + /* Initialize request progress fields */ + u_req->status = -EINPROGRESS; + u_req->actual = 0; + req->act_count = 0; + req->active = false; + req->last_desc = -1; + spin_lock_irqsave(&vhub->lock, flags); + empty = list_empty(&ep->queue); + + /* Add request to list and kick processing if empty */ + list_add_tail(&req->queue, &ep->queue); + if (empty) { + if (ep->epn.desc_mode) + ast_vhub_epn_kick_desc(ep, req); + else + ast_vhub_epn_kick(ep, req); + } + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, + bool restart_ep) +{ + u32 state, reg, loops; + + /* Stop DMA activity */ + writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Wait for it to complete */ + for (loops = 0; loops < 1000; loops++) { + state = readl(ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + state = VHUB_EP_DMA_PROC_STATUS(state); + if (state == EP_DMA_PROC_RX_IDLE || + state == EP_DMA_PROC_TX_IDLE) + break; + udelay(1); + } + if (loops >= 1000) + dev_warn(&ep->vhub->pdev->dev, "Timeout waiting for DMA\n"); + + /* If we don't have to restart the endpoint, that's it */ + if (!restart_ep) + return; + + /* Restart the endpoint */ + if (ep->epn.desc_mode) { + /* + * Take out descriptors by resetting the DMA read + * pointer to be equal to the CPU write pointer. + * + * Note: If we ever support creating descriptors for + * requests that aren't the head of the queue, we + * may have to do something more complex here, + * especially if the request being taken out is + * not the current head descriptors. + */ + reg = VHUB_EP_DMA_SET_RPTR(ep->epn.d_next) | + VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next); + writel(reg, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Then turn it back on */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } else { + /* Single mode: just turn it back on */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } +} + +static int ast_vhub_epn_dequeue(struct usb_ep* u_ep, struct usb_request *u_req) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_req *req; + unsigned long flags; + int rc = -EINVAL; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Make sure it's actually queued on this endpoint */ + list_for_each_entry (req, &ep->queue, queue) { + if (&req->req == u_req) + break; + } + + if (&req->req == u_req) { + EPVDBG(ep, "dequeue req @%p active=%d\n", + req, req->active); + if (req->active) + ast_vhub_stop_active_req(ep, true); + ast_vhub_done(ep, req, -ECONNRESET); + rc = 0; + } + + spin_unlock_irqrestore(&vhub->lock, flags); + return rc; +} + +void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep) +{ + u32 reg; + + if (WARN_ON(ep->d_idx == 0)) + return; + reg = readl(ep->epn.regs + AST_VHUB_EP_CONFIG); + if (ep->epn.stalled || ep->epn.wedged) + reg |= VHUB_EP_CFG_STALL_CTRL; + else + reg &= ~VHUB_EP_CFG_STALL_CTRL; + writel(reg, ep->epn.regs + AST_VHUB_EP_CONFIG); + + if (!ep->epn.stalled && !ep->epn.wedged) + writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), + ep->vhub->regs + AST_VHUB_EP_TOGGLE); +} + +static int ast_vhub_set_halt_and_wedge(struct usb_ep* u_ep, bool halt, + bool wedge) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + + EPDBG(ep, "Set halt (%d) & wedge (%d)\n", halt, wedge); + + if (!u_ep || !u_ep->desc) + return -EINVAL; + if (ep->d_idx == 0) + return 0; + if (ep->epn.is_iso) + return -EOPNOTSUPP; + + spin_lock_irqsave(&vhub->lock, flags); + + /* Fail with still-busy IN endpoints */ + if (halt && ep->epn.is_in && !list_empty(&ep->queue)) { + spin_unlock_irqrestore(&vhub->lock, flags); + return -EAGAIN; + } + ep->epn.stalled = halt; + ep->epn.wedged = wedge; + ast_vhub_update_epn_stall(ep); + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_epn_set_halt(struct usb_ep *u_ep, int value) +{ + return ast_vhub_set_halt_and_wedge(u_ep, value != 0, false); +} + +static int ast_vhub_epn_set_wedge(struct usb_ep *u_ep) +{ + return ast_vhub_set_halt_and_wedge(u_ep, true, true); +} + +static int ast_vhub_epn_disable(struct usb_ep* u_ep) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub *vhub = ep->vhub; + unsigned long flags; + u32 imask, ep_ier; + + EPDBG(ep, "Disabling !\n"); + + spin_lock_irqsave(&vhub->lock, flags); + + ep->epn.enabled = false; + + /* Stop active DMA if any */ + ast_vhub_stop_active_req(ep, false); + + /* Disable endpoint */ + writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); + + /* Disable ACK interrupt */ + imask = VHUB_EP_IRQ(ep->epn.g_idx); + ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); + ep_ier &= ~imask; + writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); + writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); + + /* Nuke all pending requests */ + ast_vhub_nuke(ep, -ESHUTDOWN); + + /* No more descriptor associated with request */ + ep->ep.desc = NULL; + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static int ast_vhub_epn_enable(struct usb_ep* u_ep, + const struct usb_endpoint_descriptor *desc) +{ + static const char *ep_type_string[] __maybe_unused = { "ctrl", + "isoc", + "bulk", + "intr" }; + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + struct ast_vhub_dev *dev; + struct ast_vhub *vhub; + u16 maxpacket, type; + unsigned long flags; + u32 ep_conf, ep_ier, imask; + + /* Check arguments */ + if (!u_ep || !desc) + return -EINVAL; + + maxpacket = usb_endpoint_maxp(desc); + if (!ep->d_idx || !ep->dev || + desc->bDescriptorType != USB_DT_ENDPOINT || + maxpacket == 0 || maxpacket > ep->ep.maxpacket) { + EPDBG(ep, "Invalid EP enable,d_idx=%d,dev=%p,type=%d,mp=%d/%d\n", + ep->d_idx, ep->dev, desc->bDescriptorType, + maxpacket, ep->ep.maxpacket); + return -EINVAL; + } + if (ep->d_idx != usb_endpoint_num(desc)) { + EPDBG(ep, "EP number mismatch !\n"); + return -EINVAL; + } + + if (ep->epn.enabled) { + EPDBG(ep, "Already enabled\n"); + return -EBUSY; + } + dev = ep->dev; + vhub = ep->vhub; + + /* Check device state */ + if (!dev->driver) { + EPDBG(ep, "Bogus device state: driver=%p speed=%d\n", + dev->driver, dev->gadget.speed); + return -ESHUTDOWN; + } + + /* Grab some info from the descriptor */ + ep->epn.is_in = usb_endpoint_dir_in(desc); + ep->ep.maxpacket = maxpacket; + type = usb_endpoint_type(desc); + ep->epn.d_next = ep->epn.d_last = 0; + ep->epn.is_iso = false; + ep->epn.stalled = false; + ep->epn.wedged = false; + + EPDBG(ep, "Enabling [%s] %s num %d maxpacket=%d\n", + ep->epn.is_in ? "in" : "out", ep_type_string[type], + usb_endpoint_num(desc), maxpacket); + + /* Can we use DMA descriptor mode ? */ + ep->epn.desc_mode = ep->epn.descs && ep->epn.is_in; + if (ep->epn.desc_mode) + memset(ep->epn.descs, 0, 8 * AST_VHUB_DESCS_COUNT); + + /* + * Large send function can send up to 8 packets from + * one descriptor with a limit of 4095 bytes. + */ + ep->epn.chunk_max = ep->ep.maxpacket; + if (ep->epn.is_in) { + ep->epn.chunk_max <<= 3; + while (ep->epn.chunk_max > 4095) + ep->epn.chunk_max -= ep->ep.maxpacket; + } + + switch(type) { + case USB_ENDPOINT_XFER_CONTROL: + EPDBG(ep, "Only one control endpoint\n"); + return -EINVAL; + case USB_ENDPOINT_XFER_INT: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_INT); + break; + case USB_ENDPOINT_XFER_BULK: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_BULK); + break; + case USB_ENDPOINT_XFER_ISOC: + ep_conf = VHUB_EP_CFG_SET_TYPE(EP_TYPE_ISO); + ep->epn.is_iso = true; + break; + default: + return -EINVAL; + } + + /* Encode the rest of the EP config register */ + if (maxpacket < 1024) + ep_conf |= VHUB_EP_CFG_SET_MAX_PKT(maxpacket); + if (!ep->epn.is_in) + ep_conf |= VHUB_EP_CFG_DIR_OUT; + ep_conf |= VHUB_EP_CFG_SET_EP_NUM(usb_endpoint_num(desc)); + ep_conf |= VHUB_EP_CFG_ENABLE; + ep_conf |= VHUB_EP_CFG_SET_DEV(dev->index + 1); + EPVDBG(ep, "config=%08x\n", ep_conf); + + spin_lock_irqsave(&vhub->lock, flags); + + /* Disable HW and reset DMA */ + writel(0, ep->epn.regs + AST_VHUB_EP_CONFIG); + writel(VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Configure and enable */ + writel(ep_conf, ep->epn.regs + AST_VHUB_EP_CONFIG); + + if (ep->epn.desc_mode) { + /* Clear DMA status, including the DMA read ptr */ + writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + + /* Set descriptor base */ + writel(ep->epn.descs_dma, + ep->epn.regs + AST_VHUB_EP_DESC_BASE); + + /* Set base DMA config value */ + ep->epn.dma_conf = VHUB_EP_DMA_DESC_MODE; + if (ep->epn.is_in) + ep->epn.dma_conf |= VHUB_EP_DMA_IN_LONG_MODE; + + /* First reset and disable all operations */ + writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + + /* Enable descriptor mode */ + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + } else { + /* Set base DMA config value */ + ep->epn.dma_conf = VHUB_EP_DMA_SINGLE_STAGE; + + /* Reset and switch to single stage mode */ + writel(ep->epn.dma_conf | VHUB_EP_DMA_CTRL_RESET, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + writel(ep->epn.dma_conf, + ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + writel(0, ep->epn.regs + AST_VHUB_EP_DESC_STATUS); + } + + /* Cleanup data toggle just in case */ + writel(VHUB_EP_TOGGLE_SET_EPNUM(ep->epn.g_idx), + vhub->regs + AST_VHUB_EP_TOGGLE); + + /* Cleanup and enable ACK interrupt */ + imask = VHUB_EP_IRQ(ep->epn.g_idx); + writel(imask, vhub->regs + AST_VHUB_EP_ACK_ISR); + ep_ier = readl(vhub->regs + AST_VHUB_EP_ACK_IER); + ep_ier |= imask; + writel(ep_ier, vhub->regs + AST_VHUB_EP_ACK_IER); + + /* Woot, we are online ! */ + ep->epn.enabled = true; + + spin_unlock_irqrestore(&vhub->lock, flags); + + return 0; +} + +static void ast_vhub_epn_dispose(struct usb_ep *u_ep) +{ + struct ast_vhub_ep *ep = to_ast_ep(u_ep); + + if (WARN_ON(!ep->dev || !ep->d_idx)) + return; + + EPDBG(ep, "Releasing endpoint\n"); + + /* Take it out of the EP list */ + list_del_init(&ep->ep.ep_list); + + /* Mark the address free in the device */ + ep->dev->epns[ep->d_idx - 1] = NULL; + + /* Free name & DMA buffers */ + kfree(ep->ep.name); + ep->ep.name = NULL; + dma_free_coherent(&ep->vhub->pdev->dev, + AST_VHUB_EPn_MAX_PACKET + + 8 * AST_VHUB_DESCS_COUNT, + ep->buf, ep->buf_dma); + ep->buf = NULL; + ep->epn.descs = NULL; + + /* Mark free */ + ep->dev = NULL; +} + +static const struct usb_ep_ops ast_vhub_epn_ops = { + .enable = ast_vhub_epn_enable, + .disable = ast_vhub_epn_disable, + .dispose = ast_vhub_epn_dispose, + .queue = ast_vhub_epn_queue, + .dequeue = ast_vhub_epn_dequeue, + .set_halt = ast_vhub_epn_set_halt, + .set_wedge = ast_vhub_epn_set_wedge, + .alloc_request = ast_vhub_alloc_request, + .free_request = ast_vhub_free_request, +}; + +struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr) +{ + struct ast_vhub *vhub = d->vhub; + struct ast_vhub_ep *ep; + unsigned long flags; + int i; + + /* Find a free one (no device) */ + spin_lock_irqsave(&vhub->lock, flags); + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) + if (vhub->epns[i].dev == NULL) + break; + if (i >= AST_VHUB_NUM_GEN_EPs) { + spin_unlock_irqrestore(&vhub->lock, flags); + return NULL; + } + + /* Set it up */ + ep = &vhub->epns[i]; + ep->dev = d; + spin_unlock_irqrestore(&vhub->lock, flags); + + DDBG(d, "Allocating gen EP %d for addr %d\n", i, addr); + INIT_LIST_HEAD(&ep->queue); + ep->d_idx = addr; + ep->vhub = vhub; + ep->ep.ops = &ast_vhub_epn_ops; + ep->ep.name = kasprintf(GFP_KERNEL, "ep%d", addr); + d->epns[addr-1] = ep; + ep->epn.g_idx = i; + ep->epn.regs = vhub->regs + 0x200 + (i * 0x10); + + ep->buf = dma_alloc_coherent(&vhub->pdev->dev, + AST_VHUB_EPn_MAX_PACKET + + 8 * AST_VHUB_DESCS_COUNT, + &ep->buf_dma, GFP_KERNEL); + if (!ep->buf) { + kfree(ep->ep.name); + ep->ep.name = NULL; + return NULL; + } + ep->epn.descs = ep->buf + AST_VHUB_EPn_MAX_PACKET; + ep->epn.descs_dma = ep->buf_dma + AST_VHUB_EPn_MAX_PACKET; + + usb_ep_set_maxpacket_limit(&ep->ep, AST_VHUB_EPn_MAX_PACKET); + list_add_tail(&ep->ep.ep_list, &d->gadget.ep_list); + ep->ep.caps.type_iso = true; + ep->ep.caps.type_bulk = true; + ep->ep.caps.type_int = true; + ep->ep.caps.dir_in = true; + ep->ep.caps.dir_out = true; + + return ep; +} diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c new file mode 100644 index 000000000000..35ba0e55a2e9 --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -0,0 +1,829 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget + * + * hub.c - virtual hub handling + * + * Copyright 2017 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/prefetch.h> +#include <linux/clk.h> +#include <linux/usb/gadget.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/dma-mapping.h> +#include <linux/bcd.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "vhub.h" + +/* usb 2.0 hub device descriptor + * + * A few things we may want to improve here: + * + * - We may need to indicate TT support + * - We may need a device qualifier descriptor + * as devices can pretend to be usb1 or 2 + * - Make vid/did overridable + * - make it look like usb1 if usb1 mode forced + */ +#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff)) +#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff)) + +enum { + AST_VHUB_STR_MANUF = 3, + AST_VHUB_STR_PRODUCT = 2, + AST_VHUB_STR_SERIAL = 1, +}; + +static const struct usb_device_descriptor ast_vhub_dev_desc = { + .bLength = USB_DT_DEVICE_SIZE, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_HUB, + .bDeviceSubClass = 0, + .bDeviceProtocol = 1, + .bMaxPacketSize0 = 64, + .idVendor = cpu_to_le16(0x1d6b), + .idProduct = cpu_to_le16(0x0107), + .bcdDevice = cpu_to_le16(0x0100), + .iManufacturer = AST_VHUB_STR_MANUF, + .iProduct = AST_VHUB_STR_PRODUCT, + .iSerialNumber = AST_VHUB_STR_SERIAL, + .bNumConfigurations = 1, +}; + +/* Patches to the above when forcing USB1 mode */ +static void ast_vhub_patch_dev_desc_usb1(struct usb_device_descriptor *desc) +{ + desc->bcdUSB = cpu_to_le16(0x0100); + desc->bDeviceProtocol = 0; +} + +/* + * Configuration descriptor: same comments as above + * regarding handling USB1 mode. + */ + +/* + * We don't use sizeof() as Linux definition of + * struct usb_endpoint_descriptor contains 2 + * extra bytes + */ +#define AST_VHUB_CONF_DESC_SIZE (USB_DT_CONFIG_SIZE + \ + USB_DT_INTERFACE_SIZE + \ + USB_DT_ENDPOINT_SIZE) + +static const struct ast_vhub_full_cdesc { + struct usb_config_descriptor cfg; + struct usb_interface_descriptor intf; + struct usb_endpoint_descriptor ep; +} __attribute__ ((packed)) ast_vhub_conf_desc = { + .cfg = { + .bLength = USB_DT_CONFIG_SIZE, + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = cpu_to_le16(AST_VHUB_CONF_DESC_SIZE), + .bNumInterfaces = 1, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = USB_CONFIG_ATT_ONE | + USB_CONFIG_ATT_SELFPOWER | + USB_CONFIG_ATT_WAKEUP, + .bMaxPower = 0, + }, + .intf = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_HUB, + .bInterfaceSubClass = 0, + .bInterfaceProtocol = 0, + .iInterface = 0, + }, + .ep = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0x81, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(1), + .bInterval = 0x0c, + }, +}; + +#define AST_VHUB_HUB_DESC_SIZE (USB_DT_HUB_NONVAR_SIZE + 2) + +static const struct usb_hub_descriptor ast_vhub_hub_desc = { + .bDescLength = AST_VHUB_HUB_DESC_SIZE, + .bDescriptorType = USB_DT_HUB, + .bNbrPorts = AST_VHUB_NUM_PORTS, + .wHubCharacteristics = cpu_to_le16(HUB_CHAR_NO_LPSM), + .bPwrOn2PwrGood = 10, + .bHubContrCurrent = 0, + .u.hs.DeviceRemovable[0] = 0, + .u.hs.DeviceRemovable[1] = 0xff, +}; + +/* + * These strings converted to UTF-16 must be smaller than + * our EP0 buffer. + */ +static const struct usb_string ast_vhub_str_array[] = { + { + .id = AST_VHUB_STR_SERIAL, + .s = "00000000" + }, + { + .id = AST_VHUB_STR_PRODUCT, + .s = "USB Virtual Hub" + }, + { + .id = AST_VHUB_STR_MANUF, + .s = "Aspeed" + }, + { } +}; + +static const struct usb_gadget_strings ast_vhub_strings = { + .language = 0x0409, + .strings = (struct usb_string *)ast_vhub_str_array +}; + +static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + u8 st0; + + EPDBG(ep, "GET_STATUS(dev)\n"); + + /* + * Mark it as self-powered, I doubt the BMC is powered off + * the USB bus ... + */ + st0 = 1 << USB_DEVICE_SELF_POWERED; + + /* + * Need to double check how remote wakeup actually works + * on that chip and what triggers it. + */ + if (ep->vhub->wakeup_en) + st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue) +{ + int ep_num; + u8 st0 = 0; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num); + + /* On the hub we have only EP 0 and 1 */ + if (ep_num == 1) { + if (ep->vhub->ep1_stalled) + st0 |= 1 << USB_ENDPOINT_HALT; + } else if (ep_num != 0) + return std_req_stall; + + return ast_vhub_simple_reply(ep, st0, 0); +} + +static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + EPDBG(ep, "%s_FEATURE(dev val=%02x)\n", + is_set ? "SET" : "CLEAR", wValue); + + if (wValue != USB_DEVICE_REMOTE_WAKEUP) + return std_req_stall; + + ep->vhub->wakeup_en = is_set; + EPDBG(ep, "Hub remote wakeup %s\n", + is_set ? "enabled" : "disabled"); + + return std_req_complete; +} + +static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep, + u16 wIndex, u16 wValue, + bool is_set) +{ + int ep_num; + u32 reg; + + ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK; + EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n", + is_set ? "SET" : "CLEAR", ep_num, wValue); + + if (ep_num > 1) + return std_req_stall; + if (wValue != USB_ENDPOINT_HALT) + return std_req_stall; + if (ep_num == 0) + return std_req_complete; + + EPDBG(ep, "%s stall on EP 1\n", + is_set ? "setting" : "clearing"); + + ep->vhub->ep1_stalled = is_set; + reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL); + if (is_set) { + reg |= VHUB_EP1_CTRL_STALL; + } else { + reg &= ~VHUB_EP1_CTRL_STALL; + reg |= VHUB_EP1_CTRL_RESET_TOGGLE; + } + writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL); + + return std_req_complete; +} + +static int ast_vhub_rep_desc(struct ast_vhub_ep *ep, + u8 desc_type, u16 len) +{ + size_t dsize; + + EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type); + + /* + * Copy first to EP buffer and send from there, so + * we can do some in-place patching if needed. We know + * the EP buffer is big enough but ensure that doesn't + * change. We do that now rather than later after we + * have checked sizes etc... to avoid a gcc bug where + * it thinks len is constant and barfs about read + * overflows in memcpy. + */ + switch(desc_type) { + case USB_DT_DEVICE: + dsize = USB_DT_DEVICE_SIZE; + memcpy(ep->buf, &ast_vhub_dev_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(ast_vhub_dev_desc)); + BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_CONFIG: + dsize = AST_VHUB_CONF_DESC_SIZE; + memcpy(ep->buf, &ast_vhub_conf_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(ast_vhub_conf_desc)); + BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + case USB_DT_HUB: + dsize = AST_VHUB_HUB_DESC_SIZE; + memcpy(ep->buf, &ast_vhub_hub_desc, dsize); + BUILD_BUG_ON(dsize > sizeof(ast_vhub_hub_desc)); + BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET); + break; + default: + return std_req_stall; + } + + /* Crop requested length */ + if (len > dsize) + len = dsize; + + /* Patch it if forcing USB1 */ + if (desc_type == USB_DT_DEVICE && ep->vhub->force_usb1) + ast_vhub_patch_dev_desc_usb1(ep->buf); + + /* Shoot it from the EP buffer */ + return ast_vhub_reply(ep, NULL, len); +} + +static int ast_vhub_rep_string(struct ast_vhub_ep *ep, + u8 string_id, u16 lang_id, + u16 len) +{ + int rc = usb_gadget_get_string (&ast_vhub_strings, string_id, ep->buf); + + /* + * This should never happen unless we put too big strings in + * the array above + */ + BUG_ON(rc >= AST_VHUB_EP0_MAX_PACKET); + + if (rc < 0) + return std_req_stall; + + /* Shoot it from the EP buffer */ + return ast_vhub_reply(ep, NULL, min_t(u16, rc, len)); +} + +enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + struct ast_vhub *vhub = ep->vhub; + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + /* First packet, grab speed */ + if (vhub->speed == USB_SPEED_UNKNOWN) { + u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS); + if (ustat & VHUB_USBSTS_HISPEED) + vhub->speed = USB_SPEED_HIGH; + else + vhub->speed = USB_SPEED_FULL; + UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat, + vhub->speed == USB_SPEED_HIGH ? "high" : "full"); + } + + switch ((crq->bRequestType << 8) | crq->bRequest) { + /* SET_ADDRESS */ + case DeviceOutRequest | USB_REQ_SET_ADDRESS: + EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue); + writel(wValue, vhub->regs + AST_VHUB_CONF); + return std_req_complete; + + /* GET_STATUS */ + case DeviceRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_dev_status(ep, wIndex, wValue); + case InterfaceRequest | USB_REQ_GET_STATUS: + return ast_vhub_simple_reply(ep, 0, 0); + case EndpointRequest | USB_REQ_GET_STATUS: + return ast_vhub_hub_ep_status(ep, wIndex, wValue); + + /* SET/CLEAR_FEATURE */ + case DeviceOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true); + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false); + case EndpointOutRequest | USB_REQ_SET_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true); + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: + return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false); + + /* GET/SET_CONFIGURATION */ + case DeviceRequest | USB_REQ_GET_CONFIGURATION: + return ast_vhub_simple_reply(ep, 1); + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: + if (wValue != 1) + return std_req_stall; + return std_req_complete; + + /* GET_DESCRIPTOR */ + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + switch (wValue >> 8) { + case USB_DT_DEVICE: + case USB_DT_CONFIG: + return ast_vhub_rep_desc(ep, wValue >> 8, + wLength); + case USB_DT_STRING: + return ast_vhub_rep_string(ep, wValue & 0xff, + wIndex, wLength); + } + return std_req_stall; + + /* GET/SET_INTERFACE */ + case DeviceRequest | USB_REQ_GET_INTERFACE: + return ast_vhub_simple_reply(ep, 0); + case DeviceOutRequest | USB_REQ_SET_INTERFACE: + if (wValue != 0 || wIndex != 0) + return std_req_stall; + return std_req_complete; + } + return std_req_stall; +} + +static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub, + unsigned int port) +{ + /* Update HW EP1 response */ + u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG); + u32 pmask = (1 << (port + 1)); + if (vhub->ports[port].change) + reg |= pmask; + else + reg &= ~pmask; + writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +static void ast_vhub_change_port_stat(struct ast_vhub *vhub, + unsigned int port, + u16 clr_flags, + u16 set_flags, + bool set_c) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 prev; + + /* Update port status */ + prev = p->status; + p->status = (prev & ~clr_flags) | set_flags; + DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n", + port + 1, prev, p->status, set_c); + + /* Update change bits if needed */ + if (set_c) { + u16 chg = p->status ^ prev; + + /* Only these are relevant for change */ + chg &= USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | + USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_OVERCURRENT | + USB_PORT_STAT_C_RESET | + USB_PORT_STAT_C_L1; + p->change |= chg; + + ast_vhub_update_hub_ep1(vhub, port); + } +} + +static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub) +{ + u32 reg = readl(vhub->regs + AST_VHUB_CTRL); + UDCDBG(vhub, "Waking up host !\n"); + reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP; + writel(reg, vhub->regs + AST_VHUB_CTRL); +} + +void ast_vhub_device_connect(struct ast_vhub *vhub, + unsigned int port, bool on) +{ + if (on) + ast_vhub_change_port_stat(vhub, port, 0, + USB_PORT_STAT_CONNECTION, true); + else + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_ENABLE, + 0, true); + + /* + * If the hub is set to wakup the host on connection events + * then send a wakeup. + */ + if (vhub->wakeup_en) + ast_vhub_send_host_wakeup(vhub); +} + +static void ast_vhub_wake_work(struct work_struct *work) +{ + struct ast_vhub *vhub = container_of(work, + struct ast_vhub, + wake_work); + unsigned long flags; + unsigned int i; + + /* + * Wake all sleeping ports. If a port is suspended by + * the host suspend (without explicit state suspend), + * we let the normal host wake path deal with it later. + */ + spin_lock_irqsave(&vhub->lock, flags); + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + continue; + ast_vhub_change_port_stat(vhub, i, + USB_PORT_STAT_SUSPEND, + 0, true); + ast_vhub_dev_resume(&p->dev); + } + ast_vhub_send_host_wakeup(vhub); + spin_unlock_irqrestore(&vhub->lock, flags); +} + +void ast_vhub_hub_wake_all(struct ast_vhub *vhub) +{ + /* + * A device is trying to wake the world, because this + * can recurse into the device, we break the call chain + * using a work queue + */ + schedule_work(&vhub->wake_work); +} + +static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port) +{ + struct ast_vhub_port *p = &vhub->ports[port]; + u16 set, clr, speed; + + /* First mark disabled */ + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, + USB_PORT_STAT_RESET, + false); + + if (!p->dev.driver) + return; + + /* + * This will either "start" the port or reset the + * device if already started... + */ + ast_vhub_dev_reset(&p->dev); + + /* Grab the right speed */ + speed = p->dev.driver->max_speed; + if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed) + speed = vhub->speed; + + switch (speed) { + case USB_SPEED_LOW: + set = USB_PORT_STAT_LOW_SPEED; + clr = USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_FULL: + set = 0; + clr = USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_HIGH_SPEED; + break; + case USB_SPEED_HIGH: + set = USB_PORT_STAT_HIGH_SPEED; + clr = USB_PORT_STAT_LOW_SPEED; + break; + default: + UDCDBG(vhub, "Unsupported speed %d when" + " connecting device\n", + speed); + return; + } + clr |= USB_PORT_STAT_RESET; + set |= USB_PORT_STAT_ENABLE; + + /* This should ideally be delayed ... */ + ast_vhub_change_port_stat(vhub, port, clr, set, true); +} + +static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > AST_VHUB_NUM_PORTS) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_ENABLE)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + 0, USB_PORT_STAT_SUSPEND, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_RESET: + EPDBG(ep, "Port reset !\n"); + ast_vhub_port_reset(vhub, port); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* + * On Power-on, we mark the connected flag changed, + * if there's a connected device, some hosts will + * otherwise fail to detect it. + */ + if (p->status & USB_PORT_STAT_CONNECTION) { + p->change |= USB_PORT_STAT_C_CONNECTION; + ast_vhub_update_hub_ep1(vhub, port); + } + return std_req_complete; + case USB_PORT_FEAT_TEST: + case USB_PORT_FEAT_INDICATOR: + /* We don't do anything with these */ + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep, + u8 port, u16 feat) +{ + struct ast_vhub *vhub = ep->vhub; + struct ast_vhub_port *p; + + if (port == 0 || port > AST_VHUB_NUM_PORTS) + return std_req_stall; + port--; + p = &vhub->ports[port]; + + switch(feat) { + case USB_PORT_FEAT_ENABLE: + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_ENABLE | + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_suspend(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_SUSPEND: + if (!(p->status & USB_PORT_STAT_SUSPEND)) + return std_req_complete; + ast_vhub_change_port_stat(vhub, port, + USB_PORT_STAT_SUSPEND, 0, + false); + ast_vhub_dev_resume(&p->dev); + return std_req_complete; + case USB_PORT_FEAT_POWER: + /* We don't do power control */ + return std_req_complete; + case USB_PORT_FEAT_INDICATOR: + /* We don't have indicators */ + return std_req_complete; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_RESET: + /* Clear state-change feature */ + p->change &= ~(1u << (feat - 16)); + ast_vhub_update_hub_ep1(vhub, port); + return std_req_complete; + } + return std_req_stall; +} + +static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep, + u8 port) +{ + struct ast_vhub *vhub = ep->vhub; + u16 stat, chg; + + if (port == 0 || port > AST_VHUB_NUM_PORTS) + return std_req_stall; + port--; + + stat = vhub->ports[port].status; + chg = vhub->ports[port].change; + + /* We always have power */ + stat |= USB_PORT_STAT_POWER; + + EPDBG(ep, " port status=%04x change=%04x\n", stat, chg); + + return ast_vhub_simple_reply(ep, + stat & 0xff, + stat >> 8, + chg & 0xff, + chg >> 8); +} + +enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq) +{ + u16 wValue, wIndex, wLength; + + wValue = le16_to_cpu(crq->wValue); + wIndex = le16_to_cpu(crq->wIndex); + wLength = le16_to_cpu(crq->wLength); + + switch ((crq->bRequestType << 8) | crq->bRequest) { + case GetHubStatus: + EPDBG(ep, "GetHubStatus\n"); + return ast_vhub_simple_reply(ep, 0, 0, 0, 0); + case GetPortStatus: + EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff); + return ast_vhub_get_port_stat(ep, wIndex & 0xf); + case GetHubDescriptor: + if (wValue != (USB_DT_HUB << 8)) + return std_req_stall; + EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff); + return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength); + case SetHubFeature: + case ClearHubFeature: + EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue); + /* No feature, just complete the requests */ + if (wValue == C_HUB_LOCAL_POWER || + wValue == C_HUB_OVER_CURRENT) + return std_req_complete; + return std_req_stall; + case SetPortFeature: + EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue); + case ClearPortFeature: + EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue); + return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue); + default: + EPDBG(ep, "Unknown class request\n"); + } + return std_req_stall; +} + +void ast_vhub_hub_suspend(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus suspend\n"); + + if (vhub->suspended) + return; + + vhub->suspended = true; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_suspend(&p->dev); + } +} + +void ast_vhub_hub_resume(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus resume\n"); + + if (!vhub->suspended) + return; + + vhub->suspended = false; + + /* + * Forward to unsuspended ports without changing + * their connection status. + */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + if (!(p->status & USB_PORT_STAT_SUSPEND)) + ast_vhub_dev_resume(&p->dev); + } +} + +void ast_vhub_hub_reset(struct ast_vhub *vhub) +{ + unsigned int i; + + UDCDBG(vhub, "USB bus reset\n"); + + /* + * Is the speed known ? If not we don't care, we aren't + * initialized yet and ports haven't been enabled. + */ + if (vhub->speed == USB_SPEED_UNKNOWN) + return; + + /* We aren't suspended anymore obviously */ + vhub->suspended = false; + + /* No speed set */ + vhub->speed = USB_SPEED_UNKNOWN; + + /* Wakeup not enabled anymore */ + vhub->wakeup_en = false; + + /* + * Clear all port status, disable gadgets and "suspend" + * them. They will be woken up by a port reset. + */ + for (i = 0; i < AST_VHUB_NUM_PORTS; i++) { + struct ast_vhub_port *p = &vhub->ports[i]; + + /* Only keep the connected flag */ + p->status &= USB_PORT_STAT_CONNECTION; + p->change = 0; + + /* Suspend the gadget if any */ + ast_vhub_dev_suspend(&p->dev); + } + + /* Cleanup HW */ + writel(0, vhub->regs + AST_VHUB_CONF); + writel(0, vhub->regs + AST_VHUB_EP0_CTRL); + writel(VHUB_EP1_CTRL_RESET_TOGGLE | + VHUB_EP1_CTRL_ENABLE, + vhub->regs + AST_VHUB_EP1_CTRL); + writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); +} + +void ast_vhub_init_hub(struct ast_vhub *vhub) +{ + vhub->speed = USB_SPEED_UNKNOWN; + INIT_WORK(&vhub->wake_work, ast_vhub_wake_work); +} + diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h new file mode 100644 index 000000000000..2b040257bc1f --- /dev/null +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -0,0 +1,514 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __ASPEED_VHUB_H +#define __ASPEED_VHUB_H + +/***************************** + * * + * VHUB register definitions * + * * + *****************************/ + +#define AST_VHUB_CTRL 0x00 /* Root Function Control & Status Register */ +#define AST_VHUB_CONF 0x04 /* Root Configuration Setting Register */ +#define AST_VHUB_IER 0x08 /* Interrupt Ctrl Register */ +#define AST_VHUB_ISR 0x0C /* Interrupt Status Register */ +#define AST_VHUB_EP_ACK_IER 0x10 /* Programmable Endpoint Pool ACK Interrupt Enable Register */ +#define AST_VHUB_EP_NACK_IER 0x14 /* Programmable Endpoint Pool NACK Interrupt Enable Register */ +#define AST_VHUB_EP_ACK_ISR 0x18 /* Programmable Endpoint Pool ACK Interrupt Status Register */ +#define AST_VHUB_EP_NACK_ISR 0x1C /* Programmable Endpoint Pool NACK Interrupt Status Register */ +#define AST_VHUB_SW_RESET 0x20 /* Device Controller Soft Reset Enable Register */ +#define AST_VHUB_USBSTS 0x24 /* USB Status Register */ +#define AST_VHUB_EP_TOGGLE 0x28 /* Programmable Endpoint Pool Data Toggle Value Set */ +#define AST_VHUB_ISO_FAIL_ACC 0x2C /* Isochronous Transaction Fail Accumulator */ +#define AST_VHUB_EP0_CTRL 0x30 /* Endpoint 0 Contrl/Status Register */ +#define AST_VHUB_EP0_DATA 0x34 /* Base Address of Endpoint 0 In/OUT Data Buffer Register */ +#define AST_VHUB_EP1_CTRL 0x38 /* Endpoint 1 Contrl/Status Register */ +#define AST_VHUB_EP1_STS_CHG 0x3C /* Endpoint 1 Status Change Bitmap Data */ +#define AST_VHUB_SETUP0 0x80 /* Root Device Setup Data Buffer0 */ +#define AST_VHUB_SETUP1 0x84 /* Root Device Setup Data Buffer1 */ + +/* Main control reg */ +#define VHUB_CTRL_PHY_CLK (1 << 31) +#define VHUB_CTRL_PHY_LOOP_TEST (1 << 25) +#define VHUB_CTRL_DN_PWN (1 << 24) +#define VHUB_CTRL_DP_PWN (1 << 23) +#define VHUB_CTRL_LONG_DESC (1 << 18) +#define VHUB_CTRL_ISO_RSP_CTRL (1 << 17) +#define VHUB_CTRL_SPLIT_IN (1 << 16) +#define VHUB_CTRL_LOOP_T_RESULT (1 << 15) +#define VHUB_CTRL_LOOP_T_STS (1 << 14) +#define VHUB_CTRL_PHY_BIST_RESULT (1 << 13) +#define VHUB_CTRL_PHY_BIST_CTRL (1 << 12) +#define VHUB_CTRL_PHY_RESET_DIS (1 << 11) +#define VHUB_CTRL_SET_TEST_MODE(x) ((x) << 8) +#define VHUB_CTRL_MANUAL_REMOTE_WAKEUP (1 << 4) +#define VHUB_CTRL_AUTO_REMOTE_WAKEUP (1 << 3) +#define VHUB_CTRL_CLK_STOP_SUSPEND (1 << 2) +#define VHUB_CTRL_FULL_SPEED_ONLY (1 << 1) +#define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0) + +/* IER & ISR */ +#define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18) +#define VHUB_IRQ_EP_POOL_NAK (1 << 17) +#define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16) +#define VHUB_IRQ_DEVICE5 (1 << 13) +#define VHUB_IRQ_DEVICE4 (1 << 12) +#define VHUB_IRQ_DEVICE3 (1 << 11) +#define VHUB_IRQ_DEVICE2 (1 << 10) +#define VHUB_IRQ_DEVICE1 (1 << 9) +#define VHUB_IRQ_BUS_RESUME (1 << 8) +#define VHUB_IRQ_BUS_SUSPEND (1 << 7) +#define VHUB_IRQ_BUS_RESET (1 << 6) +#define VHUB_IRQ_HUB_EP1_IN_DATA_ACK (1 << 5) +#define VHUB_IRQ_HUB_EP0_IN_DATA_NAK (1 << 4) +#define VHUB_IRQ_HUB_EP0_IN_ACK_STALL (1 << 3) +#define VHUB_IRQ_HUB_EP0_OUT_NAK (1 << 2) +#define VHUB_IRQ_HUB_EP0_OUT_ACK_STALL (1 << 1) +#define VHUB_IRQ_HUB_EP0_SETUP (1 << 0) +#define VHUB_IRQ_ACK_ALL 0x1ff + +/* SW reset reg */ +#define VHUB_SW_RESET_EP_POOL (1 << 9) +#define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8) +#define VHUB_SW_RESET_DEVICE5 (1 << 5) +#define VHUB_SW_RESET_DEVICE4 (1 << 4) +#define VHUB_SW_RESET_DEVICE3 (1 << 3) +#define VHUB_SW_RESET_DEVICE2 (1 << 2) +#define VHUB_SW_RESET_DEVICE1 (1 << 1) +#define VHUB_SW_RESET_ROOT_HUB (1 << 0) +#define VHUB_SW_RESET_ALL (VHUB_SW_RESET_EP_POOL | \ + VHUB_SW_RESET_DMA_CONTROLLER | \ + VHUB_SW_RESET_DEVICE5 | \ + VHUB_SW_RESET_DEVICE4 | \ + VHUB_SW_RESET_DEVICE3 | \ + VHUB_SW_RESET_DEVICE2 | \ + VHUB_SW_RESET_DEVICE1 | \ + VHUB_SW_RESET_ROOT_HUB) +/* EP ACK/NACK IRQ masks */ +#define VHUB_EP_IRQ(n) (1 << (n)) +#define VHUB_EP_IRQ_ALL 0x7fff /* 15 EPs */ + +/* USB status reg */ +#define VHUB_USBSTS_HISPEED (1 << 27) + +/* EP toggle */ +#define VHUB_EP_TOGGLE_VALUE (1 << 8) +#define VHUB_EP_TOGGLE_SET_EPNUM(x) ((x) & 0x1f) + +/* HUB EP0 control */ +#define VHUB_EP0_CTRL_STALL (1 << 0) +#define VHUB_EP0_TX_BUFF_RDY (1 << 1) +#define VHUB_EP0_RX_BUFF_RDY (1 << 2) +#define VHUB_EP0_RX_LEN(x) (((x) >> 16) & 0x7f) +#define VHUB_EP0_SET_TX_LEN(x) (((x) & 0x7f) << 8) + +/* HUB EP1 control */ +#define VHUB_EP1_CTRL_RESET_TOGGLE (1 << 2) +#define VHUB_EP1_CTRL_STALL (1 << 1) +#define VHUB_EP1_CTRL_ENABLE (1 << 0) + +/*********************************** + * * + * per-device register definitions * + * * + ***********************************/ +#define AST_VHUB_DEV_EN_CTRL 0x00 +#define AST_VHUB_DEV_ISR 0x04 +#define AST_VHUB_DEV_EP0_CTRL 0x08 +#define AST_VHUB_DEV_EP0_DATA 0x0c + +/* Device enable control */ +#define VHUB_DEV_EN_SET_ADDR(x) ((x) << 8) +#define VHUB_DEV_EN_ADDR_MASK ((0xff) << 8) +#define VHUB_DEV_EN_EP0_NAK_IRQEN (1 << 6) +#define VHUB_DEV_EN_EP0_IN_ACK_IRQEN (1 << 5) +#define VHUB_DEV_EN_EP0_OUT_NAK_IRQEN (1 << 4) +#define VHUB_DEV_EN_EP0_OUT_ACK_IRQEN (1 << 3) +#define VHUB_DEV_EN_EP0_SETUP_IRQEN (1 << 2) +#define VHUB_DEV_EN_SPEED_SEL_HIGH (1 << 1) +#define VHUB_DEV_EN_ENABLE_PORT (1 << 0) + +/* Interrupt status */ +#define VHUV_DEV_IRQ_EP0_IN_DATA_NACK (1 << 4) +#define VHUV_DEV_IRQ_EP0_IN_ACK_STALL (1 << 3) +#define VHUV_DEV_IRQ_EP0_OUT_DATA_NACK (1 << 2) +#define VHUV_DEV_IRQ_EP0_OUT_ACK_STALL (1 << 1) +#define VHUV_DEV_IRQ_EP0_SETUP (1 << 0) + +/* Control bits. + * + * Note: The driver relies on the bulk of those bits + * matching corresponding vHub EP0 control bits + */ +#define VHUB_DEV_EP0_CTRL_STALL VHUB_EP0_CTRL_STALL +#define VHUB_DEV_EP0_TX_BUFF_RDY VHUB_EP0_TX_BUFF_RDY +#define VHUB_DEV_EP0_RX_BUFF_RDY VHUB_EP0_RX_BUFF_RDY +#define VHUB_DEV_EP0_RX_LEN(x) VHUB_EP0_RX_LEN(x) +#define VHUB_DEV_EP0_SET_TX_LEN(x) VHUB_EP0_SET_TX_LEN(x) + +/************************************* + * * + * per-endpoint register definitions * + * * + *************************************/ + +#define AST_VHUB_EP_CONFIG 0x00 +#define AST_VHUB_EP_DMA_CTLSTAT 0x04 +#define AST_VHUB_EP_DESC_BASE 0x08 +#define AST_VHUB_EP_DESC_STATUS 0x0C + +/* EP config reg */ +#define VHUB_EP_CFG_SET_MAX_PKT(x) (((x) & 0x3ff) << 16) +#define VHUB_EP_CFG_AUTO_DATA_DISABLE (1 << 13) +#define VHUB_EP_CFG_STALL_CTRL (1 << 12) +#define VHUB_EP_CFG_SET_EP_NUM(x) (((x) & 0xf) << 8) +#define VHUB_EP_CFG_SET_TYPE(x) ((x) << 5) +#define EP_TYPE_OFF 0 +#define EP_TYPE_BULK 1 +#define EP_TYPE_INT 2 +#define EP_TYPE_ISO 3 +#define VHUB_EP_CFG_DIR_OUT (1 << 4) +#define VHUB_EP_CFG_SET_DEV(x) ((x) << 1) +#define VHUB_EP_CFG_ENABLE (1 << 0) + +/* EP DMA control */ +#define VHUB_EP_DMA_PROC_STATUS(x) (((x) >> 4) & 0xf) +#define EP_DMA_PROC_RX_IDLE 0 +#define EP_DMA_PROC_TX_IDLE 8 +#define VHUB_EP_DMA_IN_LONG_MODE (1 << 3) +#define VHUB_EP_DMA_OUT_CONTIG_MODE (1 << 3) +#define VHUB_EP_DMA_CTRL_RESET (1 << 2) +#define VHUB_EP_DMA_SINGLE_STAGE (1 << 1) +#define VHUB_EP_DMA_DESC_MODE (1 << 0) + +/* EP DMA status */ +#define VHUB_EP_DMA_SET_TX_SIZE(x) ((x) << 16) +#define VHUB_EP_DMA_TX_SIZE(x) (((x) >> 16) & 0x7ff) +#define VHUB_EP_DMA_RPTR(x) (((x) >> 8) & 0xff) +#define VHUB_EP_DMA_SET_RPTR(x) (((x) & 0xff) << 8) +#define VHUB_EP_DMA_SET_CPU_WPTR(x) (x) +#define VHUB_EP_DMA_SINGLE_KICK (1 << 0) /* WPTR = 1 for single mode */ + +/******************************* + * * + * DMA descriptors definitions * + * * + *******************************/ + +/* Desc W1 IN */ +#define VHUB_DSC1_IN_INTERRUPT (1 << 31) +#define VHUB_DSC1_IN_SPID_DATA0 (0 << 14) +#define VHUB_DSC1_IN_SPID_DATA2 (1 << 14) +#define VHUB_DSC1_IN_SPID_DATA1 (2 << 14) +#define VHUB_DSC1_IN_SPID_MDATA (3 << 14) +#define VHUB_DSC1_IN_SET_LEN(x) ((x) & 0xfff) +#define VHUB_DSC1_IN_LEN(x) ((x) & 0xfff) + +/**************************************** + * * + * Data structures and misc definitions * + * * + ****************************************/ + +#define AST_VHUB_NUM_GEN_EPs 15 /* Generic non-0 EPs */ +#define AST_VHUB_NUM_PORTS 5 /* vHub ports */ +#define AST_VHUB_EP0_MAX_PACKET 64 /* EP0's max packet size */ +#define AST_VHUB_EPn_MAX_PACKET 1024 /* Generic EPs max packet size */ +#define AST_VHUB_DESCS_COUNT 256 /* Use 256 descriptor mode (valid + * values are 256 and 32) + */ + +struct ast_vhub; +struct ast_vhub_dev; + +/* + * DMA descriptor (generic EPs only, currently only used + * for IN endpoints + */ +struct ast_vhub_desc { + __le32 w0; + __le32 w1; +}; + +/* A transfer request, either core-originated or internal */ +struct ast_vhub_req { + struct usb_request req; + struct list_head queue; + + /* Actual count written to descriptors (desc mode only) */ + unsigned int act_count; + + /* + * Desc number of the final packet or -1. For non-desc + * mode (or ep0), any >= 0 value means "last packet" + */ + int last_desc; + + /* Request active (pending DMAs) */ + bool active : 1; + + /* Internal request (don't call back core) */ + bool internal : 1; +}; +#define to_ast_req(__ureq) container_of(__ureq, struct ast_vhub_req, req) + +/* Current state of an EP0 */ +enum ep0_state { + ep0_state_token, + ep0_state_data, + ep0_state_status, +}; + +/* + * An endpoint, either generic, ep0, actual gadget EP + * or internal use vhub EP0. vhub EP1 doesn't have an + * associated structure as it's mostly HW managed. + */ +struct ast_vhub_ep { + struct usb_ep ep; + + /* Request queue */ + struct list_head queue; + + /* EP index in the device, 0 means this is an EP0 */ + unsigned int d_idx; + + /* Dev pointer or NULL for vHub EP0 */ + struct ast_vhub_dev *dev; + + /* vHub itself */ + struct ast_vhub *vhub; + + /* + * DMA buffer for EP0, fallback DMA buffer for misaligned + * OUT transfers for generic EPs + */ + void *buf; + dma_addr_t buf_dma; + + /* The rest depends on the EP type */ + union { + /* EP0 (either device or vhub) */ + struct { + /* + * EP0 registers are "similar" for + * vHub and devices but located in + * different places. + */ + void __iomem *ctlstat; + void __iomem *setup; + + /* Current state & direction */ + enum ep0_state state; + bool dir_in; + + /* Internal use request */ + struct ast_vhub_req req; + } ep0; + + /* Generic endpoint (aka EPn) */ + struct { + /* Registers */ + void __iomem *regs; + + /* Index in global pool (0..14) */ + unsigned int g_idx; + + /* DMA Descriptors */ + struct ast_vhub_desc *descs; + dma_addr_t descs_dma; + unsigned int d_next; + unsigned int d_last; + unsigned int dma_conf; + + /* Max chunk size for IN EPs */ + unsigned int chunk_max; + + /* State flags */ + bool is_in : 1; + bool is_iso : 1; + bool stalled : 1; + bool wedged : 1; + bool enabled : 1; + bool desc_mode : 1; + } epn; + }; +}; +#define to_ast_ep(__uep) container_of(__uep, struct ast_vhub_ep, ep) + +/* A device attached to a vHub port */ +struct ast_vhub_dev { + struct ast_vhub *vhub; + void __iomem *regs; + + /* Device index (0...4) and name string */ + unsigned int index; + const char *name; + + /* sysfs enclosure for the gadget gunk */ + struct device *port_dev; + + /* Link to gadget core */ + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + bool registered : 1; + bool wakeup_en : 1; + bool suspended : 1; + bool enabled : 1; + + /* Endpoint structures */ + struct ast_vhub_ep ep0; + struct ast_vhub_ep *epns[AST_VHUB_NUM_GEN_EPs]; + +}; +#define to_ast_dev(__g) container_of(__g, struct ast_vhub_dev, gadget) + +/* Per vhub port stateinfo structure */ +struct ast_vhub_port { + /* Port status & status change registers */ + u16 status; + u16 change; + + /* Associated device slot */ + struct ast_vhub_dev dev; +}; + +/* Global vhub structure */ +struct ast_vhub { + struct platform_device *pdev; + void __iomem *regs; + int irq; + spinlock_t lock; + struct work_struct wake_work; + struct clk *clk; + + /* EP0 DMA buffers allocated in one chunk */ + void *ep0_bufs; + dma_addr_t ep0_bufs_dma; + + /* EP0 of the vhub itself */ + struct ast_vhub_ep ep0; + + /* State of vhub ep1 */ + bool ep1_stalled : 1; + + /* Per-port info */ + struct ast_vhub_port ports[AST_VHUB_NUM_PORTS]; + + /* Generic EP data structures */ + struct ast_vhub_ep epns[AST_VHUB_NUM_GEN_EPs]; + + /* Upstream bus is suspended ? */ + bool suspended : 1; + + /* Hub itself can signal remote wakeup */ + bool wakeup_en : 1; + + /* Force full speed only */ + bool force_usb1 : 1; + + /* Upstream bus speed captured at bus reset */ + unsigned int speed; +}; + +/* Standard request handlers result codes */ +enum std_req_rc { + std_req_stall = -1, /* Stall requested */ + std_req_complete = 0, /* Request completed with no data */ + std_req_data = 1, /* Request completed with data */ + std_req_driver = 2, /* Pass to driver pls */ +}; + +#ifdef CONFIG_USB_GADGET_VERBOSE +#define UDCVDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) + +#define EPVDBG(ep, fmt, ...) do { \ + dev_dbg(&(ep)->vhub->pdev->dev, \ + "%s:EP%d " fmt, \ + (ep)->dev ? (ep)->dev->name : "hub", \ + (ep)->d_idx, ##__VA_ARGS__); \ + } while(0) + +#define DVDBG(d, fmt, ...) do { \ + dev_dbg(&(d)->vhub->pdev->dev, \ + "%s " fmt, (d)->name, \ + ##__VA_ARGS__); \ + } while(0) + +#else +#define UDCVDBG(u, fmt...) do { } while(0) +#define EPVDBG(ep, fmt, ...) do { } while(0) +#define DVDBG(d, fmt, ...) do { } while(0) +#endif + +#ifdef CONFIG_USB_GADGET_DEBUG +#define UDCDBG(u, fmt...) dev_dbg(&(u)->pdev->dev, fmt) + +#define EPDBG(ep, fmt, ...) do { \ + dev_dbg(&(ep)->vhub->pdev->dev, \ + "%s:EP%d " fmt, \ + (ep)->dev ? (ep)->dev->name : "hub", \ + (ep)->d_idx, ##__VA_ARGS__); \ + } while(0) + +#define DDBG(d, fmt, ...) do { \ + dev_dbg(&(d)->vhub->pdev->dev, \ + "%s " fmt, (d)->name, \ + ##__VA_ARGS__); \ + } while(0) +#else +#define UDCDBG(u, fmt...) do { } while(0) +#define EPDBG(ep, fmt, ...) do { } while(0) +#define DDBG(d, fmt, ...) do { } while(0) +#endif + +/* core.c */ +void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, + int status); +void ast_vhub_nuke(struct ast_vhub_ep *ep, int status); +struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, + gfp_t gfp_flags); +void ast_vhub_free_request(struct usb_ep *u_ep, struct usb_request *u_req); +void ast_vhub_init_hw(struct ast_vhub *vhub); + +/* ep0.c */ +void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack); +void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep); +void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, + struct ast_vhub_dev *dev); +int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len); +int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...); +#define ast_vhub_simple_reply(udc, ...) \ + __ast_vhub_simple_reply((udc), \ + sizeof((u8[]) { __VA_ARGS__ })/sizeof(u8), \ + __VA_ARGS__) + +/* hub.c */ +void ast_vhub_init_hub(struct ast_vhub *vhub); +enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); +enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); +void ast_vhub_device_connect(struct ast_vhub *vhub, unsigned int port, + bool on); +void ast_vhub_hub_suspend(struct ast_vhub *vhub); +void ast_vhub_hub_resume(struct ast_vhub *vhub); +void ast_vhub_hub_reset(struct ast_vhub *vhub); +void ast_vhub_hub_wake_all(struct ast_vhub *vhub); + +/* dev.c */ +int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx); +void ast_vhub_del_dev(struct ast_vhub_dev *d); +void ast_vhub_dev_irq(struct ast_vhub_dev *d); +int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, + struct usb_ctrlrequest *crq); + +/* epn.c */ +void ast_vhub_epn_ack_irq(struct ast_vhub_ep *ep); +void ast_vhub_update_epn_stall(struct ast_vhub_ep *ep); +struct ast_vhub_ep *ast_vhub_alloc_epn(struct ast_vhub_dev *d, u8 addr); +void ast_vhub_dev_suspend(struct ast_vhub_dev *d); +void ast_vhub_dev_resume(struct ast_vhub_dev *d); +void ast_vhub_dev_reset(struct ast_vhub_dev *d); + +#endif /* __ASPEED_VHUB_H */ diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 27c16399c7e8..a4d99bf50f2f 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -20,7 +20,6 @@ #include <linux/ctype.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <linux/usb/atmel_usba_udc.h> #include <linux/delay.h> #include <linux/of.h> #include <linux/irq.h> @@ -207,94 +206,45 @@ static void usba_ep_init_debugfs(struct usba_udc *udc, struct dentry *ep_root; ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root); - if (!ep_root) - goto err_root; ep->debugfs_dir = ep_root; - ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root, - ep, &queue_dbg_fops); - if (!ep->debugfs_queue) - goto err_queue; - - if (ep->can_dma) { - ep->debugfs_dma_status - = debugfs_create_u32("dma_status", 0400, ep_root, - &ep->last_dma_status); - if (!ep->debugfs_dma_status) - goto err_dma_status; - } - if (ep_is_control(ep)) { - ep->debugfs_state - = debugfs_create_u32("state", 0400, ep_root, - &ep->state); - if (!ep->debugfs_state) - goto err_state; - } - - return; - -err_state: + debugfs_create_file("queue", 0400, ep_root, ep, &queue_dbg_fops); if (ep->can_dma) - debugfs_remove(ep->debugfs_dma_status); -err_dma_status: - debugfs_remove(ep->debugfs_queue); -err_queue: - debugfs_remove(ep_root); -err_root: - dev_err(&ep->udc->pdev->dev, - "failed to create debugfs directory for %s\n", ep->ep.name); + debugfs_create_u32("dma_status", 0400, ep_root, + &ep->last_dma_status); + if (ep_is_control(ep)) + debugfs_create_u32("state", 0400, ep_root, &ep->state); } static void usba_ep_cleanup_debugfs(struct usba_ep *ep) { - debugfs_remove(ep->debugfs_queue); - debugfs_remove(ep->debugfs_dma_status); - debugfs_remove(ep->debugfs_state); - debugfs_remove(ep->debugfs_dir); - ep->debugfs_dma_status = NULL; - ep->debugfs_dir = NULL; + debugfs_remove_recursive(ep->debugfs_dir); } static void usba_init_debugfs(struct usba_udc *udc) { - struct dentry *root, *regs; + struct dentry *root; struct resource *regs_resource; root = debugfs_create_dir(udc->gadget.name, NULL); - if (IS_ERR(root) || !root) - goto err_root; udc->debugfs_root = root; regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); if (regs_resource) { - regs = debugfs_create_file_size("regs", 0400, root, udc, - ®s_dbg_fops, - resource_size(regs_resource)); - if (!regs) - goto err_regs; - udc->debugfs_regs = regs; + debugfs_create_file_size("regs", 0400, root, udc, + ®s_dbg_fops, + resource_size(regs_resource)); } usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0)); - - return; - -err_regs: - debugfs_remove(root); -err_root: - udc->debugfs_root = NULL; - dev_err(&udc->pdev->dev, "debugfs is not available\n"); } static void usba_cleanup_debugfs(struct usba_udc *udc) { usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0)); - debugfs_remove(udc->debugfs_regs); - debugfs_remove(udc->debugfs_root); - udc->debugfs_regs = NULL; - udc->debugfs_root = NULL; + debugfs_remove_recursive(udc->debugfs_root); } #else static inline void usba_ep_init_debugfs(struct usba_udc *udc, @@ -417,7 +367,7 @@ static inline void usba_int_enb_set(struct usba_udc *udc, u32 val) static int vbus_is_present(struct usba_udc *udc) { if (udc->vbus_pin) - return gpiod_get_value(udc->vbus_pin) ^ udc->vbus_pin_inverted; + return gpiod_get_value(udc->vbus_pin); /* No Vbus detection: Assume always present */ return 1; @@ -2076,7 +2026,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, udc->vbus_pin = devm_gpiod_get_optional(&pdev->dev, "atmel,vbus", GPIOD_IN); - udc->vbus_pin_inverted = gpiod_is_active_low(udc->vbus_pin); if (fifo_mode == 0) { pp = NULL; @@ -2279,15 +2228,15 @@ static int usba_udc_probe(struct platform_device *pdev) if (udc->vbus_pin) { irq_set_status_flags(gpiod_to_irq(udc->vbus_pin), IRQ_NOAUTOEN); ret = devm_request_threaded_irq(&pdev->dev, - gpiod_to_irq(udc->vbus_pin), NULL, - usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, - "atmel_usba_udc", udc); - if (ret) { - udc->vbus_pin = NULL; - dev_warn(&udc->pdev->dev, - "failed to request vbus irq; " - "assuming always on\n"); - } + gpiod_to_irq(udc->vbus_pin), NULL, + usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS, + "atmel_usba_udc", udc); + if (ret) { + udc->vbus_pin = NULL; + dev_warn(&udc->pdev->dev, + "failed to request vbus irq; " + "assuming always on\n"); + } } ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 969ce8f3c3e2..030bf797cd25 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -287,9 +287,6 @@ struct usba_ep { #ifdef CONFIG_USB_GADGET_DEBUG_FS u32 last_dma_status; struct dentry *debugfs_dir; - struct dentry *debugfs_queue; - struct dentry *debugfs_dma_status; - struct dentry *debugfs_state; #endif }; @@ -326,7 +323,6 @@ struct usba_udc { const struct usba_udc_errata *errata; int irq; struct gpio_desc *vbus_pin; - int vbus_pin_inverted; int num_ep; int configured_ep; struct usba_fifo_cfg *fifo_cfg; @@ -345,7 +341,6 @@ struct usba_udc { #ifdef CONFIG_USB_GADGET_DEBUG_FS struct dentry *debugfs_root; - struct dentry *debugfs_regs; #endif struct regmap *pmc; diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c index 3a8df8601074..c1fcc77403ea 100644 --- a/drivers/usb/gadget/udc/bcm63xx_udc.c +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -288,8 +288,6 @@ struct bcm63xx_req { * @ep0_reply: Pending reply from gadget driver. * @ep0_request: Outstanding ep0 request. * @debugfs_root: debugfs directory: /sys/kernel/debug/<DRV_MODULE_NAME>. - * @debugfs_usbd: debugfs file "usbd" for controller state. - * @debugfs_iudma: debugfs file "usbd" for IUDMA state. */ struct bcm63xx_udc { spinlock_t lock; @@ -330,8 +328,6 @@ struct bcm63xx_udc { struct usb_request *ep0_request; struct dentry *debugfs_root; - struct dentry *debugfs_usbd; - struct dentry *debugfs_iudma; }; static const struct usb_ep_ops bcm63xx_udc_ep_ops; @@ -2247,34 +2243,16 @@ DEFINE_SHOW_ATTRIBUTE(bcm63xx_iudma_dbg); */ static void bcm63xx_udc_init_debugfs(struct bcm63xx_udc *udc) { - struct dentry *root, *usbd, *iudma; + struct dentry *root; if (!IS_ENABLED(CONFIG_USB_GADGET_DEBUG_FS)) return; root = debugfs_create_dir(udc->gadget.name, NULL); - if (IS_ERR(root) || !root) - goto err_root; - - usbd = debugfs_create_file("usbd", 0400, root, udc, - &bcm63xx_usbd_dbg_fops); - if (!usbd) - goto err_usbd; - iudma = debugfs_create_file("iudma", 0400, root, udc, - &bcm63xx_iudma_dbg_fops); - if (!iudma) - goto err_iudma; - udc->debugfs_root = root; - udc->debugfs_usbd = usbd; - udc->debugfs_iudma = iudma; - return; -err_iudma: - debugfs_remove(usbd); -err_usbd: - debugfs_remove(root); -err_root: - dev_err(udc->dev, "debugfs is not available\n"); + + debugfs_create_file("usbd", 0400, root, udc, &bcm63xx_usbd_dbg_fops); + debugfs_create_file("iudma", 0400, root, udc, &bcm63xx_iudma_dbg_fops); } /** @@ -2285,12 +2263,7 @@ err_root: */ static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) { - debugfs_remove(udc->debugfs_iudma); - debugfs_remove(udc->debugfs_usbd); - debugfs_remove(udc->debugfs_root); - udc->debugfs_iudma = NULL; - udc->debugfs_usbd = NULL; - udc->debugfs_root = NULL; + debugfs_remove_recursive(udc->debugfs_root); } /*********************************************************************** diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 842814bc0e4f..cab5e4f09924 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -244,6 +244,12 @@ EXPORT_SYMBOL_GPL(usb_ep_free_request); * Returns zero, or a negative error code. Endpoints that are not enabled * report errors; errors will also be * reported when the usb peripheral is disconnected. + * + * If and only if @req is successfully queued (the return value is zero), + * @req->complete() will be called exactly once, when the Gadget core and + * UDC are finished with the request. When the completion function is called, + * control of the request is returned to the device driver which submitted it. + * The completion handler may then immediately free or reuse @req. */ int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index 7d8af299dfc7..9a3f7db26a5e 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -253,6 +253,7 @@ static int dr_controller_setup(struct fsl_udc *udc) portctrl |= PORTSCX_PTW_16BIT; /* fall through */ case FSL_USB2_PHY_UTMI: + case FSL_USB2_PHY_UTMI_DUAL: if (udc->pdata->have_sysif_regs) { if (udc->pdata->controller_ver) { /* controller version 1.6 or above */ diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index ca83c15d8ea4..729e60e49564 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -209,15 +209,12 @@ static void gr_dfs_create(struct gr_udc *dev) const char *name = "gr_udc_state"; dev->dfs_root = debugfs_create_dir(dev_name(dev->dev), NULL); - dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root, dev, - &gr_dfs_fops); + debugfs_create_file(name, 0444, dev->dfs_root, dev, &gr_dfs_fops); } static void gr_dfs_delete(struct gr_udc *dev) { - /* Handles NULL and ERR pointers internally */ - debugfs_remove(dev->dfs_state); - debugfs_remove(dev->dfs_root); + debugfs_remove_recursive(dev->dfs_root); } #else /* !CONFIG_USB_GADGET_DEBUG_FS */ diff --git a/drivers/usb/gadget/udc/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h index 3e913268c8c5..417ad2aa2cc7 100644 --- a/drivers/usb/gadget/udc/gr_udc.h +++ b/drivers/usb/gadget/udc/gr_udc.h @@ -217,7 +217,6 @@ struct gr_udc { spinlock_t lock; /* General lock, a.k.a. "dev->lock" in comments */ struct dentry *dfs_root; - struct dentry *dfs_state; }; #define to_gr_udc(gadget) (container_of((gadget), struct gr_udc, gadget)) diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index a58242e901df..014233252299 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -205,50 +205,19 @@ DEFINE_SHOW_ATTRIBUTE(eps_dbg); static void pxa_init_debugfs(struct pxa_udc *udc) { - struct dentry *root, *state, *queues, *eps; + struct dentry *root; root = debugfs_create_dir(udc->gadget.name, NULL); - if (IS_ERR(root) || !root) - goto err_root; - - state = debugfs_create_file("udcstate", 0400, root, udc, - &state_dbg_fops); - if (!state) - goto err_state; - queues = debugfs_create_file("queues", 0400, root, udc, - &queues_dbg_fops); - if (!queues) - goto err_queues; - eps = debugfs_create_file("epstate", 0400, root, udc, - &eps_dbg_fops); - if (!eps) - goto err_eps; - udc->debugfs_root = root; - udc->debugfs_state = state; - udc->debugfs_queues = queues; - udc->debugfs_eps = eps; - return; -err_eps: - debugfs_remove(eps); -err_queues: - debugfs_remove(queues); -err_state: - debugfs_remove(root); -err_root: - dev_err(udc->dev, "debugfs is not available\n"); + + debugfs_create_file("udcstate", 0400, root, udc, &state_dbg_fops); + debugfs_create_file("queues", 0400, root, udc, &queues_dbg_fops); + debugfs_create_file("epstate", 0400, root, udc, &eps_dbg_fops); } static void pxa_cleanup_debugfs(struct pxa_udc *udc) { - debugfs_remove(udc->debugfs_eps); - debugfs_remove(udc->debugfs_queues); - debugfs_remove(udc->debugfs_state); - debugfs_remove(udc->debugfs_root); - udc->debugfs_eps = NULL; - udc->debugfs_queues = NULL; - udc->debugfs_state = NULL; - udc->debugfs_root = NULL; + debugfs_remove_recursive(udc->debugfs_root); } #else diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h index 1128d39a4255..13b2977399ab 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.h +++ b/drivers/usb/gadget/udc/pxa27x_udc.h @@ -476,9 +476,6 @@ struct pxa_udc { #endif #ifdef CONFIG_USB_GADGET_DEBUG_FS struct dentry *debugfs_root; - struct dentry *debugfs_state; - struct dentry *debugfs_queues; - struct dentry *debugfs_eps; #endif }; #define to_pxa(g) (container_of((g), struct pxa_udc, gadget)) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 409cde4e6a51..977ea1a02cf9 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -333,6 +333,7 @@ struct renesas_usb3 { struct extcon_dev *extcon; struct work_struct extcon_work; struct phy *phy; + struct dentry *dentry; struct renesas_usb3_ep *usb3_ep; int num_usb3_eps; @@ -622,6 +623,13 @@ static void usb3_disconnect(struct renesas_usb3 *usb3) usb3_usb2_pullup(usb3, 0); usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON); usb3_reset_epc(usb3); + usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM | USB_INT_1_B3_PLLWKUP | + USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE | + USB_INT_1_SPEED | USB_INT_1_B3_WRMRST | + USB_INT_1_B3_HOTRST | USB_INT_1_B2_SPND | + USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST); + usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON); + usb3_init_epc_registers(usb3); if (usb3->driver) usb3->driver->disconnect(&usb3->gadget); @@ -2383,18 +2391,10 @@ static const struct file_operations renesas_usb3_b_device_fops = { static void renesas_usb3_debugfs_init(struct renesas_usb3 *usb3, struct device *dev) { - struct dentry *root, *file; - - root = debugfs_create_dir(dev_name(dev), NULL); - if (IS_ERR_OR_NULL(root)) { - dev_info(dev, "%s: Can't create the root\n", __func__); - return; - } + usb3->dentry = debugfs_create_dir(dev_name(dev), NULL); - file = debugfs_create_file("b_device", 0644, root, usb3, - &renesas_usb3_b_device_fops); - if (!file) - dev_info(dev, "%s: Can't create debugfs mode\n", __func__); + debugfs_create_file("b_device", 0644, usb3->dentry, usb3, + &renesas_usb3_b_device_fops); } /*------- platform_driver ------------------------------------------------*/ @@ -2402,14 +2402,13 @@ static int renesas_usb3_remove(struct platform_device *pdev) { struct renesas_usb3 *usb3 = platform_get_drvdata(pdev); + debugfs_remove_recursive(usb3->dentry); device_remove_file(&pdev->dev, &dev_attr_role); usb_del_gadget_udc(&usb3->gadget); renesas_usb3_dma_free_prd(usb3, &pdev->dev); __renesas_usb3_ep_free_request(usb3->ep0_req); - if (usb3->phy) - phy_put(usb3->phy); pm_runtime_disable(&pdev->dev); return 0; @@ -2628,6 +2627,17 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) goto err_alloc_prd; + /* + * This is optional. So, if this driver cannot get a phy, + * this driver will not handle a phy anymore. + */ + usb3->phy = devm_phy_optional_get(&pdev->dev, "usb"); + if (IS_ERR(usb3->phy)) { + ret = PTR_ERR(usb3->phy); + goto err_add_udc; + } + + pm_runtime_enable(&pdev->dev); ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget); if (ret < 0) goto err_add_udc; @@ -2636,20 +2646,11 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) goto err_dev_create; - /* - * This is an optional. So, if this driver cannot get a phy, - * this driver will not handle a phy anymore. - */ - usb3->phy = devm_phy_get(&pdev->dev, "usb"); - if (IS_ERR(usb3->phy)) - usb3->phy = NULL; - usb3->workaround_for_vbus = priv->workaround_for_vbus; renesas_usb3_debugfs_init(usb3, &pdev->dev); dev_info(&pdev->dev, "probed%s\n", usb3->phy ? " with phy" : ""); - pm_runtime_enable(usb3_to_dev(usb3)); return 0; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index f154f49e98c8..8bf5ad7a59ad 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -1871,13 +1871,9 @@ static int s3c2410_udc_probe(struct platform_device *pdev) if (retval) goto err_add_udc; - if (s3c2410_udc_debugfs_root) { - udc->regs_info = debugfs_create_file("registers", S_IRUGO, - s3c2410_udc_debugfs_root, - udc, &s3c2410_udc_debugfs_fops); - if (!udc->regs_info) - dev_warn(dev, "debugfs file creation failed\n"); - } + udc->regs_info = debugfs_create_file("registers", S_IRUGO, + s3c2410_udc_debugfs_root, udc, + &s3c2410_udc_debugfs_fops); dev_dbg(dev, "probe ok\n"); @@ -1994,11 +1990,6 @@ static int __init udc_init(void) dprintk(DEBUG_NORMAL, "%s\n", gadget_name); s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); - if (IS_ERR(s3c2410_udc_debugfs_root)) { - pr_err("%s: debugfs dir creation failed %ld\n", - gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); - s3c2410_udc_debugfs_root = NULL; - } retval = platform_driver_register(&udc_driver_24x0); if (retval) @@ -2014,7 +2005,7 @@ err: static void __exit udc_exit(void) { platform_driver_unregister(&udc_driver_24x0); - debugfs_remove(s3c2410_udc_debugfs_root); + debugfs_remove_recursive(s3c2410_udc_debugfs_root); } module_init(udc_init); diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 566ab261e8b7..7c24d1ce1088 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -33,7 +33,7 @@ * characters (which are also widely used in C strings). */ int -usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) +usb_gadget_get_string (const struct usb_gadget_strings *table, int id, u8 *buf) { struct usb_string *s; int len; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5d958da8e1bc..6e64d3a64dbb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -52,6 +52,13 @@ config USB_XHCI_PLATFORM If unsure, say N. +config USB_XHCI_HISTB + tristate "xHCI support for HiSilicon STB SoCs" + depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST) + help + Say 'Y' to enable the support for the xHCI host controller + found in HiSilicon STB SoCs. + config USB_XHCI_MTK tristate "xHCI support for MediaTek SoCs" select MFD_SYSCON @@ -234,9 +241,7 @@ config USB_EHCI_TEGRA tristate "NVIDIA Tegra HCD support" depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT - select USB_PHY - select USB_ULPI - select USB_ULPI_VIEWPORT + select USB_TEGRA_PHY help This driver enables support for the internal USB Host Controllers found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 8a8cffe0b445..9b669c9f9a48 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o +obj-$(CONFIG_USB_XHCI_HISTB) += xhci-histb.o obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o obj-$(CONFIG_USB_XHCI_TEGRA) += xhci-tegra.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 3ed75aaa09d9..7619cfb06883 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -1028,29 +1028,15 @@ static inline void create_debug_files(struct ehci_hcd *ehci) struct usb_bus *bus = &ehci_to_hcd(ehci)->self; ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root); - if (!ehci->debug_dir) - return; - if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus, - &debug_async_fops)) - goto file_error; - - if (!debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus, - &debug_bandwidth_fops)) - goto file_error; - - if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus, - &debug_periodic_fops)) - goto file_error; - - if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus, - &debug_registers_fops)) - goto file_error; - - return; - -file_error: - debugfs_remove_recursive(ehci->debug_dir); + debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus, + &debug_async_fops); + debugfs_create_file("bandwidth", S_IRUGO, ehci->debug_dir, bus, + &debug_bandwidth_fops); + debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus, + &debug_periodic_fops); + debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus, + &debug_registers_fops); } static inline void remove_debug_files(struct ehci_hcd *ehci) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d927adf3afcd..89c47ae5c7d3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1311,10 +1311,6 @@ static int __init ehci_hcd_init(void) #ifdef CONFIG_DYNAMIC_DEBUG ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root); - if (!ehci_debug_root) { - retval = -ENOENT; - goto err_debug; - } #endif #ifdef PLATFORM_DRIVER @@ -1361,7 +1357,6 @@ clean0: #ifdef CONFIG_DYNAMIC_DEBUG debugfs_remove(ehci_debug_root); ehci_debug_root = NULL; -err_debug: #endif clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded); return retval; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 8d8bafc70c1f..7e4c13346a1e 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -157,10 +157,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) struct usb_phy *phy; /* get the PHY device */ - if (dev->of_node) - phy = devm_usb_get_phy_by_phandle(dev, "phys", i); - else - phy = devm_usb_get_phy_dev(dev, i); + phy = devm_usb_get_phy_by_phandle(dev, "phys", i); if (IS_ERR(phy)) { /* Don't bail out if PHY is not absolutely necessary */ if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index a6f4389f7e88..4d2cdec4cb78 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -36,7 +36,6 @@ #define DRV_NAME "tegra-ehci" static struct hc_driver __read_mostly tegra_ehci_hc_driver; -static bool usb1_reset_attempted; struct tegra_ehci_soc_config { bool has_hostpc; @@ -51,67 +50,54 @@ struct tegra_ehci_hcd { enum tegra_usb_phy_port_speed port_speed; }; -/* - * The 1st USB controller contains some UTMI pad registers that are global for - * all the controllers on the chip. Those registers are also cleared when - * reset is asserted to the 1st controller. This means that the 1st controller - * can only be reset when no other controlled has finished probing. So we'll - * reset the 1st controller before doing any other setup on any of the - * controllers, and then never again. - * - * Since this is a PHY issue, the Tegra PHY driver should probably be doing - * the resetting of the USB controllers. But to keep compatibility with old - * device trees that don't have reset phandles in the PHYs, do it here. - * Those old DTs will be vulnerable to total USB breakage if the 1st EHCI - * device isn't the first one to finish probing, so warn them. - */ static int tegra_reset_usb_controller(struct platform_device *pdev) { struct device_node *phy_np; struct usb_hcd *hcd = platform_get_drvdata(pdev); struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; - bool has_utmi_pad_registers = false; + struct reset_control *rst; + int err; phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0); if (!phy_np) return -ENOENT; - if (of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers")) - has_utmi_pad_registers = true; + /* + * The 1st USB controller contains some UTMI pad registers that are + * global for all the controllers on the chip. Those registers are + * also cleared when reset is asserted to the 1st controller. + */ + rst = of_reset_control_get_shared(phy_np, "utmi-pads"); + if (IS_ERR(rst)) { + dev_warn(&pdev->dev, + "can't get utmi-pads reset from the PHY\n"); + dev_warn(&pdev->dev, + "continuing, but please update your DT\n"); + } else { + /* + * PHY driver performs UTMI-pads reset in a case of + * non-legacy DT. + */ + reset_control_put(rst); + } - if (!usb1_reset_attempted) { - struct reset_control *usb1_reset; + of_node_put(phy_np); - if (!has_utmi_pad_registers) - usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); - else - usb1_reset = tegra->rst; - - if (IS_ERR(usb1_reset)) { - dev_warn(&pdev->dev, - "can't get utmi-pads reset from the PHY\n"); - dev_warn(&pdev->dev, - "continuing, but please update your DT\n"); - } else { - reset_control_assert(usb1_reset); - udelay(1); - reset_control_deassert(usb1_reset); - - if (!has_utmi_pad_registers) - reset_control_put(usb1_reset); - } + /* reset control is shared, hence initialize it first */ + err = reset_control_deassert(tegra->rst); + if (err) + return err; - usb1_reset_attempted = true; - } + err = reset_control_assert(tegra->rst); + if (err) + return err; - if (!has_utmi_pad_registers) { - reset_control_assert(tegra->rst); - udelay(1); - reset_control_deassert(tegra->rst); - } + udelay(1); - of_node_put(phy_np); + err = reset_control_deassert(tegra->rst); + if (err) + return err; return 0; } @@ -440,7 +426,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto cleanup_hcd_create; } - tegra->rst = devm_reset_control_get(&pdev->dev, "usb"); + tegra->rst = devm_reset_control_get_shared(&pdev->dev, "usb"); if (IS_ERR(tegra->rst)) { dev_err(&pdev->dev, "Can't get ehci reset\n"); err = PTR_ERR(tegra->rst); @@ -452,8 +438,10 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto cleanup_hcd_create; err = tegra_reset_usb_controller(pdev); - if (err) + if (err) { + dev_err(&pdev->dev, "Failed to reset controller\n"); goto cleanup_clk_en; + } u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); if (IS_ERR(u_phy)) { @@ -538,6 +526,9 @@ static int tegra_ehci_remove(struct platform_device *pdev) usb_phy_shutdown(hcd->usb_phy); usb_remove_hcd(hcd); + reset_control_assert(tegra->rst); + udelay(1); + clk_disable_unprepare(tegra->clk); usb_put_hcd(hcd); diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c index ebf9bb219f75..100048b3bd17 100644 --- a/drivers/usb/host/fhci-dbg.c +++ b/drivers/usb/host/fhci-dbg.c @@ -83,27 +83,14 @@ void fhci_dfs_create(struct fhci_hcd *fhci) struct device *dev = fhci_to_hcd(fhci)->self.controller; fhci->dfs_root = debugfs_create_dir(dev_name(dev), usb_debug_root); - if (!fhci->dfs_root) { - WARN_ON(1); - return; - } - - fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO, - fhci->dfs_root, fhci, &fhci_dfs_regs_fops); - fhci->dfs_irq_stat = debugfs_create_file("irq_stat", - S_IFREG | S_IRUGO, fhci->dfs_root, fhci, - &fhci_dfs_irq_stat_fops); - - WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat); + debugfs_create_file("regs", S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_regs_fops); + debugfs_create_file("irq_stat", S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_irq_stat_fops); } void fhci_dfs_destroy(struct fhci_hcd *fhci) { - if (!fhci->dfs_root) - return; - - debugfs_remove(fhci->dfs_irq_stat); - debugfs_remove(fhci->dfs_regs); - debugfs_remove(fhci->dfs_root); + debugfs_remove_recursive(fhci->dfs_root); } diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index e7ec41d62410..2ce5031d866d 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -262,8 +262,6 @@ struct fhci_hcd { #ifdef CONFIG_FHCI_DEBUG int usb_irq_stat[13]; struct dentry *dfs_root; - struct dentry *dfs_regs; - struct dentry *dfs_irq_stat; #endif }; diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index d8abf401918a..e64eb47770c8 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -844,28 +844,16 @@ static int debug_registers_open(struct inode *inode, struct file *file) static inline void create_debug_files(struct fotg210_hcd *fotg210) { struct usb_bus *bus = &fotg210_to_hcd(fotg210)->self; + struct dentry *root; - fotg210->debug_dir = debugfs_create_dir(bus->bus_name, - fotg210_debug_root); - if (!fotg210->debug_dir) - return; - - if (!debugfs_create_file("async", S_IRUGO, fotg210->debug_dir, bus, - &debug_async_fops)) - goto file_error; - - if (!debugfs_create_file("periodic", S_IRUGO, fotg210->debug_dir, bus, - &debug_periodic_fops)) - goto file_error; + root = debugfs_create_dir(bus->bus_name, fotg210_debug_root); + fotg210->debug_dir = root; - if (!debugfs_create_file("registers", S_IRUGO, fotg210->debug_dir, bus, - &debug_registers_fops)) - goto file_error; - - return; - -file_error: - debugfs_remove_recursive(fotg210->debug_dir); + debugfs_create_file("async", S_IRUGO, root, bus, &debug_async_fops); + debugfs_create_file("periodic", S_IRUGO, root, bus, + &debug_periodic_fops); + debugfs_create_file("registers", S_IRUGO, root, bus, + &debug_registers_fops); } static inline void remove_debug_files(struct fotg210_hcd *fotg210) @@ -5686,10 +5674,6 @@ static int __init fotg210_hcd_init(void) sizeof(struct fotg210_itd)); fotg210_debug_root = debugfs_create_dir("fotg210", usb_debug_root); - if (!fotg210_debug_root) { - retval = -ENOENT; - goto err_debug; - } retval = platform_driver_register(&fotg210_hcd_driver); if (retval < 0) @@ -5699,7 +5683,7 @@ static int __init fotg210_hcd_init(void) clean: debugfs_remove(fotg210_debug_root); fotg210_debug_root = NULL; -err_debug: + clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded); return retval; } diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c index a213ed6f07b5..7fcf1d9dd7f3 100644 --- a/drivers/usb/host/imx21-dbg.c +++ b/drivers/usb/host/imx21-dbg.c @@ -417,46 +417,22 @@ DEFINE_SHOW_ATTRIBUTE(debug_isoc); static void create_debug_files(struct imx21 *imx21) { - imx21->debug_root = debugfs_create_dir(dev_name(imx21->dev), NULL); - if (!imx21->debug_root) - goto failed_create_rootdir; + struct dentry *root; - if (!debugfs_create_file("status", S_IRUGO, - imx21->debug_root, imx21, &debug_status_fops)) - goto failed_create; + root = debugfs_create_dir(dev_name(imx21->dev), NULL); + imx21->debug_root = root; - if (!debugfs_create_file("dmem", S_IRUGO, - imx21->debug_root, imx21, &debug_dmem_fops)) - goto failed_create; - - if (!debugfs_create_file("etd", S_IRUGO, - imx21->debug_root, imx21, &debug_etd_fops)) - goto failed_create; - - if (!debugfs_create_file("statistics", S_IRUGO, - imx21->debug_root, imx21, &debug_statistics_fops)) - goto failed_create; - - if (!debugfs_create_file("isoc", S_IRUGO, - imx21->debug_root, imx21, &debug_isoc_fops)) - goto failed_create; - - return; - -failed_create: - debugfs_remove_recursive(imx21->debug_root); - -failed_create_rootdir: - imx21->debug_root = NULL; + debugfs_create_file("status", S_IRUGO, root, imx21, &debug_status_fops); + debugfs_create_file("dmem", S_IRUGO, root, imx21, &debug_dmem_fops); + debugfs_create_file("etd", S_IRUGO, root, imx21, &debug_etd_fops); + debugfs_create_file("statistics", S_IRUGO, root, imx21, + &debug_statistics_fops); + debugfs_create_file("isoc", S_IRUGO, root, imx21, &debug_isoc_fops); } - static void remove_debug_files(struct imx21 *imx21) { - if (imx21->debug_root) { - debugfs_remove_recursive(imx21->debug_root); - imx21->debug_root = NULL; - } + debugfs_remove_recursive(imx21->debug_root); } #endif diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 4602ed801f0a..74da136d322a 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1198,14 +1198,11 @@ static int isp116x_debug_show(struct seq_file *s, void *unused) } DEFINE_SHOW_ATTRIBUTE(isp116x_debug); -static int create_debug_file(struct isp116x *isp116x) +static void create_debug_file(struct isp116x *isp116x) { isp116x->dentry = debugfs_create_file(hcd_name, S_IRUGO, NULL, isp116x, &isp116x_debug_fops); - if (!isp116x->dentry) - return -ENOMEM; - return 0; } static void remove_debug_file(struct isp116x *isp116x) @@ -1215,8 +1212,8 @@ static void remove_debug_file(struct isp116x *isp116x) #else -#define create_debug_file(d) 0 -#define remove_debug_file(d) do{}while(0) +static inline void create_debug_file(struct isp116x *isp116x) { } +static inline void remove_debug_file(struct isp116x *isp116x) { } #endif /* CONFIG_DEBUG_FS */ @@ -1643,16 +1640,10 @@ static int isp116x_probe(struct platform_device *pdev) device_wakeup_enable(hcd->self.controller); - ret = create_debug_file(isp116x); - if (ret) { - ERR("Couldn't create debugfs entry\n"); - goto err7; - } + create_debug_file(isp116x); return 0; - err7: - usb_remove_hcd(hcd); err6: usb_put_hcd(hcd); err5: diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 5ad9e9bdc8ee..e98673954020 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -212,7 +212,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, ohci_at91->sfr_regmap = at91_dt_syscon_sfr(); if (!ohci_at91->sfr_regmap) - dev_warn(dev, "failed to find sfr node\n"); + dev_dbg(dev, "failed to find sfr node\n"); board = hcd->self.controller->platform_data; ohci = hcd_to_ohci(hcd); diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index ac7d4ac34b02..d3ee1f52aaab 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -762,50 +762,23 @@ static int debug_registers_open(struct inode *inode, struct file *file) static inline void create_debug_files (struct ohci_hcd *ohci) { struct usb_bus *bus = &ohci_to_hcd(ohci)->self; + struct dentry *root; - ohci->debug_dir = debugfs_create_dir(bus->bus_name, ohci_debug_root); - if (!ohci->debug_dir) - goto dir_error; + root = debugfs_create_dir(bus->bus_name, ohci_debug_root); + ohci->debug_dir = root; - ohci->debug_async = debugfs_create_file("async", S_IRUGO, - ohci->debug_dir, ohci, - &debug_async_fops); - if (!ohci->debug_async) - goto async_error; - - ohci->debug_periodic = debugfs_create_file("periodic", S_IRUGO, - ohci->debug_dir, ohci, - &debug_periodic_fops); - if (!ohci->debug_periodic) - goto periodic_error; - - ohci->debug_registers = debugfs_create_file("registers", S_IRUGO, - ohci->debug_dir, ohci, - &debug_registers_fops); - if (!ohci->debug_registers) - goto registers_error; + debugfs_create_file("async", S_IRUGO, root, ohci, &debug_async_fops); + debugfs_create_file("periodic", S_IRUGO, root, ohci, + &debug_periodic_fops); + debugfs_create_file("registers", S_IRUGO, root, ohci, + &debug_registers_fops); ohci_dbg (ohci, "created debug files\n"); - return; - -registers_error: - debugfs_remove(ohci->debug_periodic); -periodic_error: - debugfs_remove(ohci->debug_async); -async_error: - debugfs_remove(ohci->debug_dir); -dir_error: - ohci->debug_periodic = NULL; - ohci->debug_async = NULL; - ohci->debug_dir = NULL; } static inline void remove_debug_files (struct ohci_hcd *ohci) { - debugfs_remove(ohci->debug_registers); - debugfs_remove(ohci->debug_periodic); - debugfs_remove(ohci->debug_async); - debugfs_remove(ohci->debug_dir); + debugfs_remove_recursive(ohci->debug_dir); } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 4806e0f9e8d4..210181fd98d2 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1258,10 +1258,6 @@ static int __init ohci_hcd_mod_init(void) set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root); - if (!ohci_debug_root) { - retval = -ENOENT; - goto error_debug; - } #ifdef PS3_SYSTEM_BUS_DRIVER retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER); @@ -1318,7 +1314,6 @@ static int __init ohci_hcd_mod_init(void) #endif debugfs_remove(ohci_debug_root); ohci_debug_root = NULL; - error_debug: clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); return retval; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 508a803139dd..ef4813bfc5bf 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -431,9 +431,6 @@ struct ohci_hcd { struct work_struct nec_work; /* Worker for NEC quirk */ struct dentry *debug_dir; - struct dentry *debug_async; - struct dentry *debug_periodic; - struct dentry *debug_registers; /* platform-specific data -- must come last */ unsigned long priv[0] __aligned(sizeof(s64)); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 67ad4bb6919a..3625a5c1a41b 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -1268,23 +1268,3 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); - -bool usb_xhci_needs_pci_reset(struct pci_dev *pdev) -{ - /* - * Our dear uPD72020{1,2} friend only partially resets when - * asked to via the XHCI interface, and may end up doing DMA - * at the wrong addresses, as it keeps the top 32bit of some - * addresses from its previous programming under obscure - * circumstances. - * Give it a good wack at probe time. Unfortunately, this - * needs to happen before we've had a chance to discover any - * quirk, or the system will be in a rather bad state. - */ - if (pdev->vendor == PCI_VENDOR_ID_RENESAS && - (pdev->device == 0x0014 || pdev->device == 0x0015)) - return true; - - return false; -} -EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 4ca0d9b7e463..63c633077d9e 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -16,7 +16,6 @@ void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); void sb800_prefetch(struct device *dev, int on); -bool usb_xhci_needs_pci_reset(struct pci_dev *pdev); bool usb_amd_pt_check_port(struct device *device, int port); #else struct pci_dev; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index f9c3947577fc..6218bfe54f52 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -590,14 +590,10 @@ static int uhci_start(struct usb_hcd *hcd) init_waitqueue_head(&uhci->waitqh); #ifdef UHCI_DEBUG_OPS - dentry = debugfs_create_file(hcd->self.bus_name, - S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, - uhci, &uhci_debug_operations); - if (!dentry) { - dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n"); - return -ENOMEM; - } - uhci->dentry = dentry; + uhci->dentry = debugfs_create_file(hcd->self.bus_name, + S_IFREG|S_IRUGO|S_IWUSR, + uhci_debugfs_root, uhci, + &uhci_debug_operations); #endif uhci->frame = dma_zalloc_coherent(uhci_dev(uhci), @@ -882,8 +878,6 @@ static int __init uhci_hcd_init(void) if (!errbuf) goto errbuf_failed; uhci_debugfs_root = debugfs_create_dir("uhci", usb_debug_root); - if (!uhci_debugfs_root) - goto debug_failed; #endif uhci_up_cachep = kmem_cache_create("uhci_urb_priv", @@ -918,7 +912,6 @@ up_failed: #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) debugfs_remove(uhci_debugfs_root); -debug_failed: kfree(errbuf); errbuf_failed: diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index c359bae7b754..1fbfd89d0a0f 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /** * xhci-dbgcap.c - xHCI debug capability support * diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h index e66ea0748ba3..ce0c6072bd48 100644 --- a/drivers/usb/host/xhci-dbgcap.h +++ b/drivers/usb/host/xhci-dbgcap.h @@ -1,4 +1,4 @@ - +/* SPDX-License-Identifier: GPL-2.0 */ /** * xhci-dbgcap.h - xHCI debug capability support * diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index eb494ec547e8..aff79ff5aba4 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /** * xhci-dbgtty.c - tty glue for xHCI debug capability * diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 5851052d4668..cadc01336bf8 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -8,6 +8,7 @@ */ #include <linux/slab.h> +#include <linux/uaccess.h> #include "xhci.h" #include "xhci-debugfs.h" @@ -333,6 +334,67 @@ static const struct file_operations xhci_context_fops = { .release = single_release, }; + + +static int xhci_portsc_show(struct seq_file *s, void *unused) +{ + struct xhci_port *port = s->private; + u32 portsc; + + portsc = readl(port->addr); + seq_printf(s, "%s\n", xhci_decode_portsc(portsc)); + + return 0; +} + +static int xhci_port_open(struct inode *inode, struct file *file) +{ + return single_open(file, xhci_portsc_show, inode->i_private); +} + +static ssize_t xhci_port_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct xhci_port *port = s->private; + struct xhci_hcd *xhci = hcd_to_xhci(port->rhub->hcd); + char buf[32]; + u32 portsc; + unsigned long flags; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (!strncmp(buf, "compliance", 10)) { + /* If CTC is clear, compliance is enabled by default */ + if (!HCC2_CTC(xhci->hcc_params2)) + return count; + spin_lock_irqsave(&xhci->lock, flags); + /* compliance mode can only be enabled on ports in RxDetect */ + portsc = readl(port->addr); + if ((portsc & PORT_PLS_MASK) != XDEV_RXDETECT) { + spin_unlock_irqrestore(&xhci->lock, flags); + return -EPERM; + } + portsc = xhci_port_state_to_neutral(portsc); + portsc &= ~PORT_PLS_MASK; + portsc |= PORT_LINK_STROBE | XDEV_COMP_MODE; + writel(portsc, port->addr); + spin_unlock_irqrestore(&xhci->lock, flags); + } else { + return -EINVAL; + } + return count; +} + +static const struct file_operations port_fops = { + .open = xhci_port_open, + .write = xhci_port_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static void xhci_debugfs_create_files(struct xhci_hcd *xhci, struct xhci_file_map *files, size_t nentries, void *data, @@ -449,6 +511,27 @@ void xhci_debugfs_remove_slot(struct xhci_hcd *xhci, int slot_id) dev->debugfs_private = NULL; } +static void xhci_debugfs_create_ports(struct xhci_hcd *xhci, + struct dentry *parent) +{ + unsigned int num_ports; + char port_name[8]; + struct xhci_port *port; + struct dentry *dir; + + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + + parent = debugfs_create_dir("ports", parent); + + while (num_ports--) { + scnprintf(port_name, sizeof(port_name), "port%02d", + num_ports + 1); + dir = debugfs_create_dir(port_name, parent); + port = &xhci->hw_ports[num_ports]; + debugfs_create_file("portsc", 0644, dir, port, &port_fops); + } +} + void xhci_debugfs_init(struct xhci_hcd *xhci) { struct device *dev = xhci_to_hcd(xhci)->self.controller; @@ -497,6 +580,8 @@ void xhci_debugfs_init(struct xhci_hcd *xhci) xhci->debugfs_root); xhci->debugfs_slots = debugfs_create_dir("devices", xhci->debugfs_root); + + xhci_debugfs_create_ports(xhci, xhci->debugfs_root); } void xhci_debugfs_exit(struct xhci_hcd *xhci) diff --git a/drivers/usb/host/xhci-histb.c b/drivers/usb/host/xhci-histb.c new file mode 100644 index 000000000000..27f00160332e --- /dev/null +++ b/drivers/usb/host/xhci-histb.c @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * xHCI host controller driver for HiSilicon STB SoCs + * + * Copyright (C) 2017-2018 HiSilicon Co., Ltd. http://www.hisilicon.com + * + * Authors: Jianguo Sun <sunjianguo1@huawei.com> + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#include "xhci.h" + +#define GTXTHRCFG 0xc108 +#define GRXTHRCFG 0xc10c +#define REG_GUSB2PHYCFG0 0xc200 +#define BIT_UTMI_8_16 BIT(3) +#define BIT_UTMI_ULPI BIT(4) +#define BIT_FREECLK_EXIST BIT(30) + +#define REG_GUSB3PIPECTL0 0xc2c0 +#define USB3_DEEMPHASIS_MASK GENMASK(2, 1) +#define USB3_DEEMPHASIS0 BIT(1) +#define USB3_TX_MARGIN1 BIT(4) + +struct xhci_hcd_histb { + struct device *dev; + struct usb_hcd *hcd; + void __iomem *ctrl; + struct clk *bus_clk; + struct clk *utmi_clk; + struct clk *pipe_clk; + struct clk *suspend_clk; + struct reset_control *soft_reset; +}; + +static inline struct xhci_hcd_histb *hcd_to_histb(struct usb_hcd *hcd) +{ + return dev_get_drvdata(hcd->self.controller); +} + +static int xhci_histb_config(struct xhci_hcd_histb *histb) +{ + struct device_node *np = histb->dev->of_node; + u32 regval; + + if (of_property_match_string(np, "phys-names", "inno") >= 0) { + /* USB2 PHY chose ulpi 8bit interface */ + regval = readl(histb->ctrl + REG_GUSB2PHYCFG0); + regval &= ~BIT_UTMI_ULPI; + regval &= ~(BIT_UTMI_8_16); + regval &= ~BIT_FREECLK_EXIST; + writel(regval, histb->ctrl + REG_GUSB2PHYCFG0); + } + + if (of_property_match_string(np, "phys-names", "combo") >= 0) { + /* + * write 0x010c0012 to GUSB3PIPECTL0 + * GUSB3PIPECTL0[5:3] = 010 : Tx Margin = 900mV , + * decrease TX voltage + * GUSB3PIPECTL0[2:1] = 01 : Tx Deemphasis = -3.5dB, + * refer to xHCI spec + */ + regval = readl(histb->ctrl + REG_GUSB3PIPECTL0); + regval &= ~USB3_DEEMPHASIS_MASK; + regval |= USB3_DEEMPHASIS0; + regval |= USB3_TX_MARGIN1; + writel(regval, histb->ctrl + REG_GUSB3PIPECTL0); + } + + writel(0x23100000, histb->ctrl + GTXTHRCFG); + writel(0x23100000, histb->ctrl + GRXTHRCFG); + + return 0; +} + +static int xhci_histb_clks_get(struct xhci_hcd_histb *histb) +{ + struct device *dev = histb->dev; + + histb->bus_clk = devm_clk_get(dev, "bus"); + if (IS_ERR(histb->bus_clk)) { + dev_err(dev, "fail to get bus clk\n"); + return PTR_ERR(histb->bus_clk); + } + + histb->utmi_clk = devm_clk_get(dev, "utmi"); + if (IS_ERR(histb->utmi_clk)) { + dev_err(dev, "fail to get utmi clk\n"); + return PTR_ERR(histb->utmi_clk); + } + + histb->pipe_clk = devm_clk_get(dev, "pipe"); + if (IS_ERR(histb->pipe_clk)) { + dev_err(dev, "fail to get pipe clk\n"); + return PTR_ERR(histb->pipe_clk); + } + + histb->suspend_clk = devm_clk_get(dev, "suspend"); + if (IS_ERR(histb->suspend_clk)) { + dev_err(dev, "fail to get suspend clk\n"); + return PTR_ERR(histb->suspend_clk); + } + + return 0; +} + +static int xhci_histb_host_enable(struct xhci_hcd_histb *histb) +{ + int ret; + + ret = clk_prepare_enable(histb->bus_clk); + if (ret) { + dev_err(histb->dev, "failed to enable bus clk\n"); + return ret; + } + + ret = clk_prepare_enable(histb->utmi_clk); + if (ret) { + dev_err(histb->dev, "failed to enable utmi clk\n"); + goto err_utmi_clk; + } + + ret = clk_prepare_enable(histb->pipe_clk); + if (ret) { + dev_err(histb->dev, "failed to enable pipe clk\n"); + goto err_pipe_clk; + } + + ret = clk_prepare_enable(histb->suspend_clk); + if (ret) { + dev_err(histb->dev, "failed to enable suspend clk\n"); + goto err_suspend_clk; + } + + reset_control_deassert(histb->soft_reset); + + return 0; + +err_suspend_clk: + clk_disable_unprepare(histb->pipe_clk); +err_pipe_clk: + clk_disable_unprepare(histb->utmi_clk); +err_utmi_clk: + clk_disable_unprepare(histb->bus_clk); + + return ret; +} + +static void xhci_histb_host_disable(struct xhci_hcd_histb *histb) +{ + reset_control_assert(histb->soft_reset); + + clk_disable_unprepare(histb->suspend_clk); + clk_disable_unprepare(histb->pipe_clk); + clk_disable_unprepare(histb->utmi_clk); + clk_disable_unprepare(histb->bus_clk); +} + +static void xhci_histb_quirks(struct device *dev, struct xhci_hcd *xhci) +{ + /* + * As of now platform drivers don't provide MSI support so we ensure + * here that the generic code does not try to make a pci_dev from our + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; +} + +/* called during probe() after chip reset completes */ +static int xhci_histb_setup(struct usb_hcd *hcd) +{ + struct xhci_hcd_histb *histb = hcd_to_histb(hcd); + int ret; + + if (usb_hcd_is_primary_hcd(hcd)) { + ret = xhci_histb_config(histb); + if (ret) + return ret; + } + + return xhci_gen_setup(hcd, xhci_histb_quirks); +} + +static const struct xhci_driver_overrides xhci_histb_overrides __initconst = { + .reset = xhci_histb_setup, +}; + +static struct hc_driver __read_mostly xhci_histb_hc_driver; +static int xhci_histb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct xhci_hcd_histb *histb; + const struct hc_driver *driver; + struct usb_hcd *hcd; + struct xhci_hcd *xhci; + struct resource *res; + int irq; + int ret = -ENODEV; + + if (usb_disabled()) + return -ENODEV; + + driver = &xhci_histb_hc_driver; + histb = devm_kzalloc(dev, sizeof(*histb), GFP_KERNEL); + if (!histb) + return -ENOMEM; + + histb->dev = dev; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + histb->ctrl = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(histb->ctrl)) + return PTR_ERR(histb->ctrl); + + ret = xhci_histb_clks_get(histb); + if (ret) + return ret; + + histb->soft_reset = devm_reset_control_get(dev, "soft"); + if (IS_ERR(histb->soft_reset)) { + dev_err(dev, "failed to get soft reset\n"); + return PTR_ERR(histb->soft_reset); + } + + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + device_enable_async_suspend(dev); + + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + hcd = usb_create_hcd(driver, dev, dev_name(dev)); + if (!hcd) { + ret = -ENOMEM; + goto disable_pm; + } + + hcd->regs = histb->ctrl; + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + histb->hcd = hcd; + dev_set_drvdata(hcd->self.controller, histb); + + ret = xhci_histb_host_enable(histb); + if (ret) + goto put_hcd; + + xhci = hcd_to_xhci(hcd); + + device_wakeup_enable(hcd->self.controller); + + xhci->main_hcd = hcd; + xhci->shared_hcd = usb_create_shared_hcd(driver, dev, dev_name(dev), + hcd); + if (!xhci->shared_hcd) { + ret = -ENOMEM; + goto disable_host; + } + + if (device_property_read_bool(dev, "usb2-lpm-disable")) + xhci->quirks |= XHCI_HW_LPM_DISABLE; + + if (device_property_read_bool(dev, "usb3-lpm-capable")) + xhci->quirks |= XHCI_LPM_SUPPORT; + + /* imod_interval is the interrupt moderation value in nanoseconds. */ + xhci->imod_interval = 40000; + device_property_read_u32(dev, "imod-interval-ns", + &xhci->imod_interval); + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto put_usb3_hcd; + + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); + if (ret) + goto dealloc_usb2_hcd; + + device_enable_async_suspend(dev); + pm_runtime_put_noidle(dev); + + /* + * Prevent runtime pm from being on as default, users should enable + * runtime pm using power/control in sysfs. + */ + pm_runtime_forbid(dev); + + return 0; + +dealloc_usb2_hcd: + usb_remove_hcd(hcd); +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); +disable_host: + xhci_histb_host_disable(histb); +put_hcd: + usb_put_hcd(hcd); +disable_pm: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + + return ret; +} + +static int xhci_histb_remove(struct platform_device *dev) +{ + struct xhci_hcd_histb *histb = platform_get_drvdata(dev); + struct usb_hcd *hcd = histb->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + xhci->xhc_state |= XHCI_STATE_REMOVING; + + usb_remove_hcd(xhci->shared_hcd); + device_wakeup_disable(&dev->dev); + + usb_remove_hcd(hcd); + usb_put_hcd(xhci->shared_hcd); + + xhci_histb_host_disable(histb); + usb_put_hcd(hcd); + pm_runtime_put_sync(&dev->dev); + pm_runtime_disable(&dev->dev); + + return 0; +} + +static int __maybe_unused xhci_histb_suspend(struct device *dev) +{ + struct xhci_hcd_histb *histb = dev_get_drvdata(dev); + struct usb_hcd *hcd = histb->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + + ret = xhci_suspend(xhci, device_may_wakeup(dev)); + + if (!device_may_wakeup(dev)) + xhci_histb_host_disable(histb); + + return ret; +} + +static int __maybe_unused xhci_histb_resume(struct device *dev) +{ + struct xhci_hcd_histb *histb = dev_get_drvdata(dev); + struct usb_hcd *hcd = histb->hcd; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (!device_may_wakeup(dev)) + xhci_histb_host_enable(histb); + + return xhci_resume(xhci, 0); +} + +static const struct dev_pm_ops xhci_histb_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(xhci_histb_suspend, xhci_histb_resume) +}; +#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &xhci_histb_pm_ops : NULL) + +#ifdef CONFIG_OF +static const struct of_device_id histb_xhci_of_match[] = { + { .compatible = "hisilicon,hi3798cv200-xhci"}, + { }, +}; +MODULE_DEVICE_TABLE(of, histb_xhci_of_match); +#endif + +static struct platform_driver histb_xhci_driver = { + .probe = xhci_histb_probe, + .remove = xhci_histb_remove, + .driver = { + .name = "xhci-histb", + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(histb_xhci_of_match), + }, +}; +MODULE_ALIAS("platform:xhci-histb"); + +static int __init xhci_histb_init(void) +{ + xhci_init_driver(&xhci_histb_hc_driver, &xhci_histb_overrides); + return platform_driver_register(&histb_xhci_driver); +} +module_init(xhci_histb_init); + +static void __exit xhci_histb_exit(void) +{ + platform_driver_unregister(&histb_xhci_driver); +} +module_exit(xhci_histb_exit); + +MODULE_DESCRIPTION("HiSilicon STB xHCI Host Controller Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 32cd52ca8318..a4b95d019f84 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -189,9 +189,10 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb2_ports; - + rhub = &xhci->usb2_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_HUB; temp = 1 + (ports / 8); @@ -202,7 +203,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, */ memset(port_removable, 0, sizeof(port_removable)); for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb2_ports[i]); + portsc = readl(rhub->ports[i]->addr); /* If a device is removable, PORTSC reports a 0, same as in the * hub descriptor DeviceRemovable bits. */ @@ -241,8 +242,10 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, u16 port_removable; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb3_ports; + rhub = &xhci->usb3_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_SS_HUB; desc->bDescLength = USB_DT_SS_HUB_SIZE; @@ -256,7 +259,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, port_removable = 0; /* bit 0 is reserved, bit 1 is for port 1, etc. */ for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb3_ports[i]); + portsc = readl(rhub->ports[i]->addr); if (portsc & PORT_DEV_REMOVE) port_removable |= 1 << (i + 1); } @@ -538,28 +541,13 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, port_change_bit, wIndex, port_status); } -static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) +struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) { - int max_ports; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (hcd->speed >= HCD_USB3) { - max_ports = xhci->num_usb3_ports; - *port_array = xhci->usb3_ports; - } else { - max_ports = xhci->num_usb2_ports; - *port_array = xhci->usb2_ports; - } - - return max_ports; -} - -static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) -{ - __le32 __iomem **port_array; - - xhci_get_ports(hcd, &port_array); - return port_array[index]; + if (hcd->speed >= HCD_USB3) + return &xhci->usb3_rhub; + return &xhci->usb2_rhub; } /* @@ -570,21 +558,23 @@ static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) { - __le32 __iomem *addr; + struct xhci_hub *rhub; + struct xhci_port *port; u32 temp; - addr = xhci_get_port_io_addr(hcd, index); - temp = readl(addr); + rhub = xhci_get_rhub(hcd); + port = rhub->ports[index]; + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); if (on) { /* Power on */ - writel(temp | PORT_POWER, addr); - temp = readl(addr); + writel(temp | PORT_POWER, port->addr); + temp = readl(port->addr); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", index, temp); } else { /* Power off */ - writel(temp & ~PORT_POWER, addr); + writel(temp & ~PORT_POWER, port->addr); } spin_unlock_irqrestore(&xhci->lock, *flags); @@ -600,13 +590,13 @@ static void xhci_port_set_test_mode(struct xhci_hcd *xhci, u16 test_mode, u16 wIndex) { u32 temp; - __le32 __iomem *addr; + struct xhci_port *port; - /* xhci only supports test mode for usb2 ports, i.e. xhci->main_hcd */ - addr = xhci_get_port_io_addr(xhci->main_hcd, wIndex); - temp = readl(addr + PORTPMSC); + /* xhci only supports test mode for usb2 ports */ + port = xhci->usb2_rhub.ports[wIndex]; + temp = readl(port->addr + PORTPMSC); temp |= test_mode << PORT_TEST_MODE_SHIFT; - writel(temp, addr + PORTPMSC); + writel(temp, port->addr + PORTPMSC); xhci->test_mode = test_mode; if (test_mode == TEST_FORCE_EN) xhci_start(xhci); @@ -633,10 +623,10 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci, /* Put all ports to the Disable state by clear PP */ xhci_dbg(xhci, "Disable all port (PP = 0)\n"); /* Power off USB3 ports*/ - for (i = 0; i < xhci->num_usb3_ports; i++) + for (i = 0; i < xhci->usb3_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags); /* Power off USB2 ports*/ - for (i = 0; i < xhci->num_usb2_ports; i++) + for (i = 0; i < xhci->usb2_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags); /* Stop the controller */ xhci_dbg(xhci, "Stop controller\n"); @@ -672,24 +662,24 @@ static int xhci_exit_test_mode(struct xhci_hcd *xhci) return xhci_reset(xhci); } -void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 link_state) +void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port, + u32 link_state) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | link_state; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, - __le32 __iomem **port_array, int port_id, u16 wake_mask) + struct xhci_port *port, u16 wake_mask) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) @@ -707,20 +697,20 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, else temp &= ~PORT_WKOC_E; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } /* Test and clear port RWC bit */ -void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 port_bit) +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, + u32 port_bit) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); if (temp & port_bit) { temp = xhci_port_state_to_neutral(temp); temp |= port_bit; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } } @@ -794,7 +784,7 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) { - u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1); bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) @@ -840,8 +830,7 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) */ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_bus_state *bus_state, - __le32 __iomem **port_array, - u16 wIndex, u32 raw_port_status, + u16 wIndex, u32 raw_port_status, unsigned long flags) __releases(&xhci->lock) __acquires(&xhci->lock) @@ -849,6 +838,11 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; int slot_id; + struct xhci_hub *rhub; + struct xhci_port *port; + + rhub = xhci_get_rhub(hcd); + port = rhub->ports[wIndex]; /* wPortChange bits */ if (raw_port_status & PORT_CSC) @@ -919,10 +913,8 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, set_bit(wIndex, &bus_state->rexit_ports); - xhci_test_and_clear_bit(xhci, port_array, wIndex, - PORT_PLC); - xhci_set_link_state(xhci, port_array, wIndex, - XDEV_U0); + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); spin_unlock_irqrestore(&xhci->lock, flags); time_left = wait_for_completion_timeout( @@ -940,7 +932,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } xhci_ring_device(xhci, slot_id); } else { - int port_status = readl(port_array[wIndex]); + int port_status = readl(port->addr); xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", XHCI_MAX_REXIT_TIMEOUT, port_status); @@ -1024,15 +1016,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, unsigned long flags; u32 temp, status; int retval = 0; - __le32 __iomem **port_array; int slot_id; struct xhci_bus_state *bus_state; u16 link_state = 0; u16 wake_mask = 0; u16 timeout = 0; u16 test_mode = 0; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); @@ -1070,15 +1065,15 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; break; } trace_xhci_get_port_status(wIndex, temp); - status = xhci_get_port_status(hcd, bus_state, port_array, - wIndex, temp, flags); + status = xhci_get_port_status(hcd, bus_state, wIndex, temp, + flags); if (status == 0xffffffff) goto error; @@ -1096,7 +1091,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, retval = -EINVAL; break; } - port_li = readl(port_array[wIndex] + PORTLI); + port_li = readl(ports[wIndex]->addr + PORTLI); status = xhci_get_ext_port_status(temp, port_li); put_unaligned_le32(cpu_to_le32(status), &buf[4]); } @@ -1114,7 +1109,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1124,10 +1119,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* FIXME: What new port features do we need to support? */ switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PLS_MASK) != XDEV_U0) { /* Resume the port to U0 first */ - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], XDEV_U0); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); @@ -1137,7 +1132,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * a port unless the port reports that it is in the * enabled (PED = ‘1’,PLS < ‘3’) state. */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) || (temp & PORT_PLS_MASK) >= XDEV_U3) { xhci_warn(xhci, "USB core suspending device not in U0/U1/U2.\n"); @@ -1155,18 +1150,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_stop_device(xhci, slot_id, 1); spin_lock_irqsave(&xhci->lock, flags); - xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3); + xhci_set_link_state(xhci, ports[wIndex], XDEV_U3); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); bus_state->suspended_ports |= 1 << wIndex; break; case USB_PORT_FEAT_LINK_STATE: - temp = readl(port_array[wIndex]); - + temp = readl(ports[wIndex]->addr); /* Disable port */ if (link_state == USB_SS_PORT_LS_SS_DISABLED) { xhci_dbg(xhci, "Disable port %d\n", wIndex); @@ -1178,17 +1172,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp |= PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | PORT_RC | PORT_PLC | PORT_CEC; - writel(temp | PORT_PE, port_array[wIndex]); - temp = readl(port_array[wIndex]); + writel(temp | PORT_PE, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; } /* Put link in RxDetect (enable port) */ if (link_state == USB_SS_PORT_LS_RX_DETECT) { xhci_dbg(xhci, "Enable port %d\n", wIndex); - xhci_set_link_state(xhci, port_array, wIndex, - link_state); - temp = readl(port_array[wIndex]); + xhci_set_link_state(xhci, ports[wIndex], + link_state); + temp = readl(ports[wIndex]->addr); break; } @@ -1219,9 +1213,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "Enable compliance mode transition for port %d\n", wIndex); - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], link_state); - temp = readl(port_array[wIndex]); + + temp = readl(ports[wIndex]->addr); break; } /* Port must be enabled */ @@ -1248,14 +1243,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } } - xhci_set_link_state(xhci, port_array, wIndex, - link_state); + xhci_set_link_state(xhci, ports[wIndex], link_state); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (link_state == USB_SS_PORT_LS_U3) bus_state->suspended_ports |= 1 << wIndex; break; @@ -1270,40 +1264,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); - writel(temp, port_array[wIndex]); + writel(temp, ports[wIndex]->addr); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_REMOTE_WAKE_MASK: - xhci_set_remote_wake_mask(xhci, port_array, - wIndex, wake_mask); - temp = readl(port_array[wIndex]); + xhci_set_remote_wake_mask(xhci, ports[wIndex], + wake_mask); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port remote wake mask, " "actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_BH_PORT_RESET: temp |= PORT_WR; - writel(temp, port_array[wIndex]); - - temp = readl(port_array[wIndex]); + writel(temp, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; case USB_PORT_FEAT_U1_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U1_TIMEOUT_MASK; temp |= PORT_U1_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_U2_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U2_TIMEOUT_MASK; temp |= PORT_U2_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_TEST: /* 4.19.6 Port Test Modes (USB2 Test Mode) */ @@ -1318,13 +1311,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } /* unblock any posted writes */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); break; case ClearPortFeature: if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1334,7 +1327,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) @@ -1344,12 +1337,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; set_bit(wIndex, &bus_state->resuming_ports); - xhci_set_link_state(xhci, port_array, wIndex, - XDEV_RESUME); + xhci_set_link_state(xhci, ports[wIndex], + XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); msleep(USB_RESUME_TIMEOUT); spin_lock_irqsave(&xhci->lock, flags); - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], XDEV_U0); clear_bit(wIndex, &bus_state->resuming_ports); } @@ -1374,11 +1367,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_C_PORT_LINK_STATE: case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: xhci_clear_port_change_bit(xhci, wValue, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_ENABLE: xhci_disable_port(hcd, xhci, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_POWER: xhci_set_port_power(xhci, hcd, wIndex, false, &flags); @@ -1415,11 +1408,14 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int i, retval; struct xhci_hcd *xhci = hcd_to_xhci(hcd); int max_ports; - __le32 __iomem **port_array; struct xhci_bus_state *bus_state; bool reset_change = false; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; /* Initial status is no changes */ @@ -1437,7 +1433,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < max_ports; i++) { - temp = readl(port_array[i]); + temp = readl(ports[i]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1469,11 +1465,14 @@ int xhci_bus_suspend(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); int max_ports, port_index; - __le32 __iomem **port_array; struct xhci_bus_state *bus_state; unsigned long flags; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); @@ -1494,7 +1493,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) u32 t1, t2; int slot_id; - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { @@ -1534,7 +1533,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); @@ -1547,12 +1546,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * warm reset a USB3 device stuck in polling or compliance mode after resume. * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 */ -static bool xhci_port_missing_cas_quirk(int port_index, - __le32 __iomem **port_array) +static bool xhci_port_missing_cas_quirk(struct xhci_port *port) { u32 portsc; - portsc = readl(port_array[port_index]); + portsc = readl(port->addr); /* if any of these are set we are not stuck */ if (portsc & (PORT_CONNECT | PORT_CAS)) @@ -1565,9 +1563,9 @@ static bool xhci_port_missing_cas_quirk(int port_index, /* clear wakeup/change bits, and do a warm port reset */ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); portsc |= PORT_WR; - writel(portsc, port_array[port_index]); + writel(portsc, port->addr); /* flush write */ - readl(port_array[port_index]); + readl(port->addr); return true; } @@ -1575,15 +1573,18 @@ int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_bus_state *bus_state; - __le32 __iomem **port_array; unsigned long flags; int max_ports, port_index; int slot_id; int sret; u32 next_state; u32 temp, portsc; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; if (time_before(jiffies, bus_state->next_statechange)) @@ -1608,12 +1609,12 @@ int xhci_bus_resume(struct usb_hcd *hcd) port_index = max_ports; while (port_index--) { - portsc = readl(port_array[port_index]); + portsc = readl(ports[port_index]->addr); /* warm reset CAS limited ports stuck in polling/compliance */ if ((xhci->quirks & XHCI_MISSING_CAS) && (hcd->speed >= HCD_USB3) && - xhci_port_missing_cas_quirk(port_index, port_array)) { + xhci_port_missing_cas_quirk(ports[port_index])) { xhci_dbg(xhci, "reset stuck port %d\n", port_index); clear_bit(port_index, &bus_state->bus_suspended); continue; @@ -1637,7 +1638,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) } /* disable wake for all ports, write new link state if needed */ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); - writel(portsc, port_array[port_index]); + writel(portsc, ports[port_index]->addr); } /* USB2 specific resume signaling delay and U0 link state transition */ @@ -1650,23 +1651,22 @@ int xhci_bus_resume(struct usb_hcd *hcd) for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { /* Clear PLC to poll it later for U0 transition */ - xhci_test_and_clear_bit(xhci, port_array, port_index, + xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); - xhci_set_link_state(xhci, port_array, port_index, - XDEV_U0); + xhci_set_link_state(xhci, ports[port_index], XDEV_U0); } } /* poll for U0 link state complete, both USB2 and USB3 */ for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { - sret = xhci_handshake(port_array[port_index], PORT_PLC, + sret = xhci_handshake(ports[port_index]->addr, PORT_PLC, PORT_PLC, 10 * 1000); if (sret) { xhci_warn(xhci, "port %d resume PLC timeout\n", port_index); continue; } - xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); + xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); if (slot_id) xhci_ring_device(xhci, slot_id); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index e5ace8995b3b..4fe74711938e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -33,8 +33,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, struct xhci_segment *seg; dma_addr_t dma; int i; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - seg = kzalloc(sizeof *seg, flags); + seg = kzalloc_node(sizeof(*seg), flags, dev_to_node(dev)); if (!seg) return NULL; @@ -45,7 +46,8 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, } if (max_packet) { - seg->bounce_buf = kzalloc(max_packet, flags); + seg->bounce_buf = kzalloc_node(max_packet, flags, + dev_to_node(dev)); if (!seg->bounce_buf) { dma_pool_free(xhci->segment_pool, seg->trbs, dma); kfree(seg); @@ -363,8 +365,9 @@ struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, { struct xhci_ring *ring; int ret; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - ring = kzalloc(sizeof *(ring), flags); + ring = kzalloc_node(sizeof(*ring), flags, dev_to_node(dev)); if (!ring) return NULL; @@ -458,11 +461,12 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, int type, gfp_t flags) { struct xhci_container_ctx *ctx; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT)) return NULL; - ctx = kzalloc(sizeof(*ctx), flags); + ctx = kzalloc_node(sizeof(*ctx), flags, dev_to_node(dev)); if (!ctx) return NULL; @@ -615,6 +619,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, struct xhci_ring *cur_ring; u64 addr; int ret; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; xhci_dbg(xhci, "Allocating %u streams and %u " "stream context array entries.\n", @@ -625,7 +630,8 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, } xhci->cmd_ring_reserved_trbs++; - stream_info = kzalloc(sizeof(struct xhci_stream_info), mem_flags); + stream_info = kzalloc_node(sizeof(*stream_info), mem_flags, + dev_to_node(dev)); if (!stream_info) goto cleanup_trbs; @@ -633,9 +639,9 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, stream_info->num_stream_ctxs = num_stream_ctxs; /* Initialize the array of virtual pointers to stream rings. */ - stream_info->stream_rings = kzalloc( - sizeof(struct xhci_ring *)*num_streams, - mem_flags); + stream_info->stream_rings = kcalloc_node( + num_streams, sizeof(struct xhci_ring *), mem_flags, + dev_to_node(dev)); if (!stream_info->stream_rings) goto cleanup_info; @@ -831,6 +837,7 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci, struct xhci_tt_bw_info *tt_info; unsigned int num_ports; int i, j; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; if (!tt->multi) num_ports = 1; @@ -840,7 +847,8 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci, for (i = 0; i < num_ports; i++, tt_info++) { struct xhci_interval_bw_table *bw_table; - tt_info = kzalloc(sizeof(*tt_info), mem_flags); + tt_info = kzalloc_node(sizeof(*tt_info), mem_flags, + dev_to_node(dev)); if (!tt_info) goto free_tts; INIT_LIST_HEAD(&tt_info->tt_list); @@ -1054,8 +1062,7 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, /* * The xHCI roothub may have ports of differing speeds in any order in the port - * status registers. xhci->port_array provides an array of the port speed for - * each offset into the port status registers. + * status registers. * * The xHCI hardware wants to know the roothub port number that the USB device * is attached to (or the roothub port its ancestor hub is attached to). All we @@ -1642,7 +1649,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) if (!num_sp) return 0; - xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags); + xhci->scratchpad = kzalloc_node(sizeof(*xhci->scratchpad), flags, + dev_to_node(dev)); if (!xhci->scratchpad) goto fail_sp; @@ -1652,7 +1660,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->scratchpad->sp_array) goto fail_sp2; - xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags); + xhci->scratchpad->sp_buffers = kcalloc_node(num_sp, sizeof(void *), + flags, dev_to_node(dev)); if (!xhci->scratchpad->sp_buffers) goto fail_sp3; @@ -1720,14 +1729,16 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, bool allocate_completion, gfp_t mem_flags) { struct xhci_command *command; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - command = kzalloc(sizeof(*command), mem_flags); + command = kzalloc_node(sizeof(*command), mem_flags, dev_to_node(dev)); if (!command) return NULL; if (allocate_completion) { command->completion = - kzalloc(sizeof(struct completion), mem_flags); + kzalloc_node(sizeof(struct completion), mem_flags, + dev_to_node(dev)); if (!command->completion) { kfree(command); return NULL; @@ -1890,18 +1901,18 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) no_bw: xhci->cmd_ring_reserved_trbs = 0; - xhci->num_usb2_ports = 0; - xhci->num_usb3_ports = 0; + xhci->usb2_rhub.num_ports = 0; + xhci->usb3_rhub.num_ports = 0; xhci->num_active_eps = 0; - kfree(xhci->usb2_ports); - kfree(xhci->usb3_ports); - kfree(xhci->port_array); + kfree(xhci->usb2_rhub.ports); + kfree(xhci->usb3_rhub.ports); + kfree(xhci->hw_ports); kfree(xhci->rh_bw); kfree(xhci->ext_caps); - xhci->usb2_ports = NULL; - xhci->usb3_ports = NULL; - xhci->port_array = NULL; + xhci->usb2_rhub.ports = NULL; + xhci->usb3_rhub.ports = NULL; + xhci->hw_ports = NULL; xhci->rh_bw = NULL; xhci->ext_caps = NULL; @@ -2100,6 +2111,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, int i; u8 major_revision, minor_revision; struct xhci_hub *rhub; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; temp = readl(addr); major_revision = XHCI_EXT_PORT_MAJOR(temp); @@ -2136,8 +2148,8 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, rhub->psi_count = XHCI_EXT_PORT_PSIC(temp); if (rhub->psi_count) { - rhub->psi = kcalloc(rhub->psi_count, sizeof(*rhub->psi), - GFP_KERNEL); + rhub->psi = kcalloc_node(rhub->psi_count, sizeof(*rhub->psi), + GFP_KERNEL, dev_to_node(dev)); if (!rhub->psi) rhub->psi_count = 0; @@ -2186,36 +2198,53 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, port_offset--; for (i = port_offset; i < (port_offset + port_count); i++) { + struct xhci_port *hw_port = &xhci->hw_ports[i]; /* Duplicate entry. Ignore the port if the revisions differ. */ - if (xhci->port_array[i] != 0) { + if (hw_port->rhub) { xhci_warn(xhci, "Duplicate port entry, Ext Cap %p," " port %u\n", addr, i); xhci_warn(xhci, "Port was marked as USB %u, " "duplicated as USB %u\n", - xhci->port_array[i], major_revision); + hw_port->rhub->maj_rev, major_revision); /* Only adjust the roothub port counts if we haven't * found a similar duplicate. */ - if (xhci->port_array[i] != major_revision && - xhci->port_array[i] != DUPLICATE_ENTRY) { - if (xhci->port_array[i] == 0x03) - xhci->num_usb3_ports--; - else - xhci->num_usb2_ports--; - xhci->port_array[i] = DUPLICATE_ENTRY; + if (hw_port->rhub != rhub && + hw_port->hcd_portnum != DUPLICATE_ENTRY) { + hw_port->rhub->num_ports--; + hw_port->hcd_portnum = DUPLICATE_ENTRY; } - /* FIXME: Should we disable the port? */ continue; } - xhci->port_array[i] = major_revision; - if (major_revision == 0x03) - xhci->num_usb3_ports++; - else - xhci->num_usb2_ports++; + hw_port->rhub = rhub; + rhub->num_ports++; } /* FIXME: Should we disable ports not in the Extended Capabilities? */ } +static void xhci_create_rhub_port_array(struct xhci_hcd *xhci, + struct xhci_hub *rhub, gfp_t flags) +{ + int port_index = 0; + int i; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + + if (!rhub->num_ports) + return; + rhub->ports = kcalloc_node(rhub->num_ports, sizeof(rhub->ports), flags, + dev_to_node(dev)); + for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) { + if (xhci->hw_ports[i].rhub != rhub || + xhci->hw_ports[i].hcd_portnum == DUPLICATE_ENTRY) + continue; + xhci->hw_ports[i].hcd_portnum = port_index; + rhub->ports[port_index] = &xhci->hw_ports[i]; + port_index++; + if (port_index == rhub->num_ports) + break; + } +} + /* * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that * specify what speeds each port is supposed to be. We can't count on the port @@ -2228,16 +2257,25 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) void __iomem *base; u32 offset; unsigned int num_ports; - int i, j, port_index; + int i, j; int cap_count = 0; u32 cap_start; + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; num_ports = HCS_MAX_PORTS(xhci->hcs_params1); - xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags); - if (!xhci->port_array) + xhci->hw_ports = kcalloc_node(num_ports, sizeof(*xhci->hw_ports), + flags, dev_to_node(dev)); + if (!xhci->hw_ports) return -ENOMEM; - xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags); + for (i = 0; i < num_ports; i++) { + xhci->hw_ports[i].addr = &xhci->op_regs->port_status_base + + NUM_PORT_REGS * i; + xhci->hw_ports[i].hw_portnum = i; + } + + xhci->rh_bw = kzalloc_node(sizeof(*xhci->rh_bw)*num_ports, flags, + dev_to_node(dev)); if (!xhci->rh_bw) return -ENOMEM; for (i = 0; i < num_ports; i++) { @@ -2264,7 +2302,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) XHCI_EXT_CAPS_PROTOCOL); } - xhci->ext_caps = kzalloc(sizeof(*xhci->ext_caps) * cap_count, flags); + xhci->ext_caps = kcalloc_node(cap_count, sizeof(*xhci->ext_caps), + flags, dev_to_node(dev)); if (!xhci->ext_caps) return -ENOMEM; @@ -2272,86 +2311,44 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) while (offset) { xhci_add_in_port(xhci, num_ports, base + offset, cap_count); - if (xhci->num_usb2_ports + xhci->num_usb3_ports == num_ports) + if (xhci->usb2_rhub.num_ports + xhci->usb3_rhub.num_ports == + num_ports) break; offset = xhci_find_next_ext_cap(base, offset, XHCI_EXT_CAPS_PROTOCOL); } - - if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) { + if (xhci->usb2_rhub.num_ports == 0 && xhci->usb3_rhub.num_ports == 0) { xhci_warn(xhci, "No ports on the roothubs?\n"); return -ENODEV; } xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "Found %u USB 2.0 ports and %u USB 3.0 ports.", - xhci->num_usb2_ports, xhci->num_usb3_ports); + "Found %u USB 2.0 ports and %u USB 3.0 ports.", + xhci->usb2_rhub.num_ports, xhci->usb3_rhub.num_ports); /* Place limits on the number of roothub ports so that the hub * descriptors aren't longer than the USB core will allocate. */ - if (xhci->num_usb3_ports > USB_SS_MAXPORTS) { + if (xhci->usb3_rhub.num_ports > USB_SS_MAXPORTS) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Limiting USB 3.0 roothub ports to %u.", USB_SS_MAXPORTS); - xhci->num_usb3_ports = USB_SS_MAXPORTS; + xhci->usb3_rhub.num_ports = USB_SS_MAXPORTS; } - if (xhci->num_usb2_ports > USB_MAXCHILDREN) { + if (xhci->usb2_rhub.num_ports > USB_MAXCHILDREN) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Limiting USB 2.0 roothub ports to %u.", USB_MAXCHILDREN); - xhci->num_usb2_ports = USB_MAXCHILDREN; + xhci->usb2_rhub.num_ports = USB_MAXCHILDREN; } /* * Note we could have all USB 3.0 ports, or all USB 2.0 ports. * Not sure how the USB core will handle a hub with no ports... */ - if (xhci->num_usb2_ports) { - xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)* - xhci->num_usb2_ports, flags); - if (!xhci->usb2_ports) - return -ENOMEM; - - port_index = 0; - for (i = 0; i < num_ports; i++) { - if (xhci->port_array[i] == 0x03 || - xhci->port_array[i] == 0 || - xhci->port_array[i] == DUPLICATE_ENTRY) - continue; - xhci->usb2_ports[port_index] = - &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "USB 2.0 port at index %u, " - "addr = %p", i, - xhci->usb2_ports[port_index]); - port_index++; - if (port_index == xhci->num_usb2_ports) - break; - } - } - if (xhci->num_usb3_ports) { - xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)* - xhci->num_usb3_ports, flags); - if (!xhci->usb3_ports) - return -ENOMEM; + xhci_create_rhub_port_array(xhci, &xhci->usb2_rhub, flags); + xhci_create_rhub_port_array(xhci, &xhci->usb3_rhub, flags); - port_index = 0; - for (i = 0; i < num_ports; i++) - if (xhci->port_array[i] == 0x03) { - xhci->usb3_ports[port_index] = - &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "USB 3.0 port at index %u, " - "addr = %p", i, - xhci->usb3_ports[port_index]); - port_index++; - if (port_index == xhci->num_usb3_ports) - break; - } - } return 0; } diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index eea7360a18fc..fa33d6e5b1cb 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -58,7 +58,7 @@ static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, bw_index = (virt_dev->real_port - 1) * 2 + 1; } else { /* add one more for each SS port */ - bw_index = virt_dev->real_port + xhci->num_usb3_ports - 1; + bw_index = virt_dev->real_port + xhci->usb3_rhub.num_ports - 1; } return bw_index; @@ -284,7 +284,7 @@ int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk) int i; /* ss IN and OUT are separated */ - num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports; + num_usb_bus = xhci->usb3_rhub.num_ports * 2 + xhci->usb2_rhub.num_ports; sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); if (sch_array == NULL) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 85ffda85f8ab..6372edf339d9 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -196,11 +196,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_BROKEN_STREAMS; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && - pdev->device == 0x0014) + pdev->device == 0x0014) { xhci->quirks |= XHCI_TRUST_TX_LENGTH; + xhci->quirks |= XHCI_ZERO_64B_REGS; + } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && - pdev->device == 0x0015) + pdev->device == 0x0015) { xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_ZERO_64B_REGS; + } if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; @@ -284,13 +288,6 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) driver = (struct hc_driver *)id->driver_data; - /* For some HW implementation, a XHCI reset is just not enough... */ - if (usb_xhci_needs_pci_reset(dev)) { - dev_info(&dev->dev, "Resetting\n"); - if (pci_reset_function_locked(dev)) - dev_warn(&dev->dev, "Reset failed"); - } - /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 91a1a824673d..f0a99aa0ac58 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1497,44 +1497,6 @@ static void handle_vendor_event(struct xhci_hcd *xhci, handle_cmd_completion(xhci, &event->event_cmd); } -/* @port_id: the one-based port ID from the hardware (indexed from array of all - * port registers -- USB 3.0 and USB 2.0). - * - * Returns a zero-based port number, which is suitable for indexing into each of - * the split roothubs' port arrays and bus state arrays. - * Add one to it in order to call xhci_find_slot_id_by_port. - */ -static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, - struct xhci_hcd *xhci, u32 port_id) -{ - unsigned int i; - unsigned int num_similar_speed_ports = 0; - - /* port_id from the hardware is 1-based, but port_array[], usb3_ports[], - * and usb2_ports are 0-based indexes. Count the number of similar - * speed ports, up to 1 port before this port. - */ - for (i = 0; i < (port_id - 1); i++) { - u8 port_speed = xhci->port_array[i]; - - /* - * Skip ports that don't have known speeds, or have duplicate - * Extended Capabilities port speed entries. - */ - if (port_speed == 0 || port_speed == DUPLICATE_ENTRY) - continue; - - /* - * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and - * 1.1 ports are under the USB 2.0 hub. If the port speed - * matches the device speed, it's a similar speed port. - */ - if ((port_speed == 0x03) == (hcd->speed >= HCD_USB3)) - num_similar_speed_ports++; - } - return num_similar_speed_ports; -} - static void handle_device_notification(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1563,11 +1525,10 @@ static void handle_port_status(struct xhci_hcd *xhci, u32 portsc, cmd_reg; int max_ports; int slot_id; - unsigned int faked_port_index; - u8 major_revision; + unsigned int hcd_portnum; struct xhci_bus_state *bus_state; - __le32 __iomem **port_array; bool bogus_port_status = false; + struct xhci_port *port; /* Port status change events always have a successful completion code */ if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS) @@ -1584,49 +1545,19 @@ static void handle_port_status(struct xhci_hcd *xhci, return; } - /* Figure out which usb_hcd this port is attached to: - * is it a USB 3.0 port or a USB 2.0/1.1 port? - */ - major_revision = xhci->port_array[port_id - 1]; - - /* Find the right roothub. */ - hcd = xhci_to_hcd(xhci); - if ((major_revision == 0x03) != (hcd->speed >= HCD_USB3)) - hcd = xhci->shared_hcd; - - if (major_revision == 0) { - xhci_warn(xhci, "Event for port %u not in " - "Extended Capabilities, ignoring.\n", - port_id); - bogus_port_status = true; - goto cleanup; - } - if (major_revision == DUPLICATE_ENTRY) { - xhci_warn(xhci, "Event for port %u duplicated in" - "Extended Capabilities, ignoring.\n", - port_id); + port = &xhci->hw_ports[port_id - 1]; + if (!port || !port->rhub || port->hcd_portnum == DUPLICATE_ENTRY) { + xhci_warn(xhci, "Event for invalid port %u\n", port_id); bogus_port_status = true; goto cleanup; } - /* - * Hardware port IDs reported by a Port Status Change Event include USB - * 3.0 and USB 2.0 ports. We want to check if the port has reported a - * resume event, but we first need to translate the hardware port ID - * into the index into the ports on the correct split roothub, and the - * correct bus_state structure. - */ + hcd = port->rhub->hcd; bus_state = &xhci->bus_state[hcd_index(hcd)]; - if (hcd->speed >= HCD_USB3) - port_array = xhci->usb3_ports; - else - port_array = xhci->usb2_ports; - /* Find the faked port hub number */ - faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci, - port_id); - portsc = readl(port_array[faked_port_index]); + hcd_portnum = port->hcd_portnum; + portsc = readl(port->addr); - trace_xhci_handle_port_status(faked_port_index, portsc); + trace_xhci_handle_port_status(hcd_portnum, portsc); if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); @@ -1634,7 +1565,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } if (hcd->speed >= HCD_USB3 && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) - bus_state->port_remote_wakeup &= ~(1 << faked_port_index); + bus_state->port_remote_wakeup &= ~(1 << hcd_portnum); if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) { xhci_dbg(xhci, "port resume event for port %d\n", port_id); @@ -1651,29 +1582,26 @@ static void handle_port_status(struct xhci_hcd *xhci, * so we can tell the difference between the end of * device and host initiated resume. */ - bus_state->port_remote_wakeup |= 1 << faked_port_index; - xhci_test_and_clear_bit(xhci, port_array, - faked_port_index, PORT_PLC); - xhci_set_link_state(xhci, port_array, faked_port_index, - XDEV_U0); + bus_state->port_remote_wakeup |= 1 << hcd_portnum; + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); /* Need to wait until the next link state change * indicates the device is actually in U0. */ bogus_port_status = true; goto cleanup; - } else if (!test_bit(faked_port_index, - &bus_state->resuming_ports)) { + } else if (!test_bit(hcd_portnum, &bus_state->resuming_ports)) { xhci_dbg(xhci, "resume HS port %d\n", port_id); - bus_state->resume_done[faked_port_index] = jiffies + + bus_state->resume_done[hcd_portnum] = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); - set_bit(faked_port_index, &bus_state->resuming_ports); + set_bit(hcd_portnum, &bus_state->resuming_ports); /* Do the rest in GetPortStatus after resume time delay. * Avoid polling roothub status before that so that a * usb device auto-resume latency around ~40ms. */ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); mod_timer(&hcd->rh_timer, - bus_state->resume_done[faked_port_index]); + bus_state->resume_done[hcd_portnum]); bogus_port_status = true; } } @@ -1688,17 +1616,14 @@ static void handle_port_status(struct xhci_hcd *xhci, * so the roothub behavior is consistent with external * USB 3.0 hub behavior. */ - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index + 1); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1); if (slot_id && xhci->devs[slot_id]) xhci_ring_device(xhci, slot_id); - if (bus_state->port_remote_wakeup & (1 << faked_port_index)) { - bus_state->port_remote_wakeup &= - ~(1 << faked_port_index); - xhci_test_and_clear_bit(xhci, port_array, - faked_port_index, PORT_PLC); + if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) { + bus_state->port_remote_wakeup &= ~(1 << hcd_portnum); + xhci_test_and_clear_bit(xhci, port, PORT_PLC); usb_wakeup_notification(hcd->self.root_hub, - faked_port_index + 1); + hcd_portnum + 1); bogus_port_status = true; goto cleanup; } @@ -1710,16 +1635,15 @@ static void handle_port_status(struct xhci_hcd *xhci, * out of the RExit state. */ if (!DEV_SUPERSPEED_ANY(portsc) && - test_and_clear_bit(faked_port_index, + test_and_clear_bit(hcd_portnum, &bus_state->rexit_ports)) { - complete(&bus_state->rexit_done[faked_port_index]); + complete(&bus_state->rexit_done[hcd_portnum]); bogus_port_status = true; goto cleanup; } if (hcd->speed < HCD_USB3) - xhci_test_and_clear_bit(xhci, port_array, faked_port_index, - PORT_PLC); + xhci_test_and_clear_bit(xhci, port, PORT_PLC); cleanup: /* Update event ring dequeue pointer before dropping the lock */ diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 2c076ea80522..a8c1d073cba0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -18,9 +18,11 @@ #include <linux/phy/tegra/xusb.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/slab.h> +#include <soc/tegra/pmc.h> #include "xhci.h" @@ -761,6 +763,49 @@ static void tegra_xusb_phy_disable(struct tegra_xusb *tegra) } } +static int tegra_xusb_runtime_suspend(struct device *dev) +{ + struct tegra_xusb *tegra = dev_get_drvdata(dev); + + tegra_xusb_phy_disable(tegra); + regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); + tegra_xusb_clk_disable(tegra); + + return 0; +} + +static int tegra_xusb_runtime_resume(struct device *dev) +{ + struct tegra_xusb *tegra = dev_get_drvdata(dev); + int err; + + err = tegra_xusb_clk_enable(tegra); + if (err) { + dev_err(dev, "failed to enable clocks: %d\n", err); + return err; + } + + err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies); + if (err) { + dev_err(dev, "failed to enable regulators: %d\n", err); + goto disable_clk; + } + + err = tegra_xusb_phy_enable(tegra); + if (err < 0) { + dev_err(dev, "failed to enable PHYs: %d\n", err); + goto disable_regulator; + } + + return 0; + +disable_regulator: + regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); +disable_clk: + tegra_xusb_clk_disable(tegra); + return err; +} + static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) { unsigned int code_tag_blocks, code_size_blocks, code_blocks; @@ -930,20 +975,6 @@ static int tegra_xusb_probe(struct platform_device *pdev) if (IS_ERR(tegra->padctl)) return PTR_ERR(tegra->padctl); - tegra->host_rst = devm_reset_control_get(&pdev->dev, "xusb_host"); - if (IS_ERR(tegra->host_rst)) { - err = PTR_ERR(tegra->host_rst); - dev_err(&pdev->dev, "failed to get xusb_host reset: %d\n", err); - goto put_padctl; - } - - tegra->ss_rst = devm_reset_control_get(&pdev->dev, "xusb_ss"); - if (IS_ERR(tegra->ss_rst)) { - err = PTR_ERR(tegra->ss_rst); - dev_err(&pdev->dev, "failed to get xusb_ss reset: %d\n", err); - goto put_padctl; - } - tegra->host_clk = devm_clk_get(&pdev->dev, "xusb_host"); if (IS_ERR(tegra->host_clk)) { err = PTR_ERR(tegra->host_clk); @@ -1007,11 +1038,48 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_padctl; } + if (!pdev->dev.pm_domain) { + tegra->host_rst = devm_reset_control_get(&pdev->dev, + "xusb_host"); + if (IS_ERR(tegra->host_rst)) { + err = PTR_ERR(tegra->host_rst); + dev_err(&pdev->dev, + "failed to get xusb_host reset: %d\n", err); + goto put_padctl; + } + + tegra->ss_rst = devm_reset_control_get(&pdev->dev, "xusb_ss"); + if (IS_ERR(tegra->ss_rst)) { + err = PTR_ERR(tegra->ss_rst); + dev_err(&pdev->dev, "failed to get xusb_ss reset: %d\n", + err); + goto put_padctl; + } + + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBA, + tegra->ss_clk, + tegra->ss_rst); + if (err) { + dev_err(&pdev->dev, + "failed to enable XUSBA domain: %d\n", err); + goto put_padctl; + } + + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_XUSBC, + tegra->host_clk, + tegra->host_rst); + if (err) { + dev_err(&pdev->dev, + "failed to enable XUSBC domain: %d\n", err); + goto disable_xusba; + } + } + tegra->supplies = devm_kcalloc(&pdev->dev, tegra->soc->num_supplies, sizeof(*tegra->supplies), GFP_KERNEL); if (!tegra->supplies) { err = -ENOMEM; - goto put_padctl; + goto disable_xusbc; } for (i = 0; i < tegra->soc->num_supplies; i++) @@ -1021,7 +1089,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra->supplies); if (err) { dev_err(&pdev->dev, "failed to get regulators: %d\n", err); - goto put_padctl; + goto disable_xusbc; } for (i = 0; i < tegra->soc->num_types; i++) @@ -1031,7 +1099,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) sizeof(*tegra->phys), GFP_KERNEL); if (!tegra->phys) { err = -ENOMEM; - goto put_padctl; + goto disable_xusbc; } for (i = 0, k = 0; i < tegra->soc->num_types; i++) { @@ -1047,29 +1115,35 @@ static int tegra_xusb_probe(struct platform_device *pdev) "failed to get PHY %s: %ld\n", prop, PTR_ERR(phy)); err = PTR_ERR(phy); - goto put_padctl; + goto disable_xusbc; } tegra->phys[k++] = phy; } } - err = tegra_xusb_clk_enable(tegra); - if (err) { - dev_err(&pdev->dev, "failed to enable clocks: %d\n", err); - goto put_padctl; + tegra->hcd = usb_create_hcd(&tegra_xhci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!tegra->hcd) { + err = -ENOMEM; + goto disable_xusbc; } - err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies); - if (err) { - dev_err(&pdev->dev, "failed to enable regulators: %d\n", err); - goto disable_clk; - } + /* + * This must happen after usb_create_hcd(), because usb_create_hcd() + * will overwrite the drvdata of the device with the hcd it creates. + */ + platform_set_drvdata(pdev, tegra); + + pm_runtime_enable(&pdev->dev); + if (pm_runtime_enabled(&pdev->dev)) + err = pm_runtime_get_sync(&pdev->dev); + else + err = tegra_xusb_runtime_resume(&pdev->dev); - err = tegra_xusb_phy_enable(tegra); if (err < 0) { - dev_err(&pdev->dev, "failed to enable PHYs: %d\n", err); - goto disable_regulator; + dev_err(&pdev->dev, "failed to enable device: %d\n", err); + goto disable_rpm; } tegra_xusb_ipfs_config(tegra, regs); @@ -1077,22 +1151,9 @@ static int tegra_xusb_probe(struct platform_device *pdev) err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); - goto disable_phy; - } - - tegra->hcd = usb_create_hcd(&tegra_xhci_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!tegra->hcd) { - err = -ENOMEM; - goto disable_phy; + goto put_rpm; } - /* - * This must happen after usb_create_hcd(), because usb_create_hcd() - * will overwrite the drvdata of the device with the hcd it creates. - */ - platform_set_drvdata(pdev, tegra); - tegra->hcd->regs = tegra->regs; tegra->hcd->rsrc_start = regs->start; tegra->hcd->rsrc_len = resource_size(regs); @@ -1100,7 +1161,7 @@ static int tegra_xusb_probe(struct platform_device *pdev) err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED); if (err < 0) { dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err); - goto put_usb2; + goto put_rpm; } device_wakeup_enable(tegra->hcd->self.controller); @@ -1155,14 +1216,18 @@ put_usb3: usb_put_hcd(xhci->shared_hcd); remove_usb2: usb_remove_hcd(tegra->hcd); -put_usb2: +put_rpm: + if (!pm_runtime_status_suspended(&pdev->dev)) + tegra_xusb_runtime_suspend(&pdev->dev); +disable_rpm: + pm_runtime_disable(&pdev->dev); usb_put_hcd(tegra->hcd); -disable_phy: - tegra_xusb_phy_disable(tegra); -disable_regulator: - regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); -disable_clk: - tegra_xusb_clk_disable(tegra); +disable_xusbc: + if (!&pdev->dev.pm_domain) + tegra_powergate_power_off(TEGRA_POWERGATE_XUSBC); +disable_xusba: + if (!&pdev->dev.pm_domain) + tegra_powergate_power_off(TEGRA_POWERGATE_XUSBA); put_padctl: tegra_xusb_padctl_put(tegra->padctl); return err; @@ -1181,9 +1246,8 @@ static int tegra_xusb_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt, tegra->fw.phys); - tegra_xusb_phy_disable(tegra); - regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies); - tegra_xusb_clk_disable(tegra); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); tegra_xusb_padctl_put(tegra->padctl); @@ -1211,6 +1275,8 @@ static int tegra_xusb_resume(struct device *dev) #endif static const struct dev_pm_ops tegra_xusb_pm_ops = { + SET_RUNTIME_PM_OPS(tegra_xusb_runtime_suspend, + tegra_xusb_runtime_resume, NULL) SET_SYSTEM_SLEEP_PM_OPS(tegra_xusb_suspend, tegra_xusb_resume) }; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 711da3306b14..8c8da2d657fa 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -33,8 +33,8 @@ static int link_quirk; module_param(link_quirk, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); -static unsigned int quirks; -module_param(quirks, uint, S_IRUGO); +static unsigned long long quirks; +module_param(quirks, ullong, S_IRUGO); MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); /* TODO: copied from ehci-hcd.c - can this be refactored? */ @@ -209,6 +209,68 @@ int xhci_reset(struct xhci_hcd *xhci) return ret; } +static void xhci_zero_64b_regs(struct xhci_hcd *xhci) +{ + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + int err, i; + u64 val; + + /* + * Some Renesas controllers get into a weird state if they are + * reset while programmed with 64bit addresses (they will preserve + * the top half of the address in internal, non visible + * registers). You end up with half the address coming from the + * kernel, and the other half coming from the firmware. Also, + * changing the programming leads to extra accesses even if the + * controller is supposed to be halted. The controller ends up with + * a fatal fault, and is then ripe for being properly reset. + * + * Special care is taken to only apply this if the device is behind + * an iommu. Doing anything when there is no iommu is definitely + * unsafe... + */ + if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !dev->iommu_group) + return; + + xhci_info(xhci, "Zeroing 64bit base registers, expecting fault\n"); + + /* Clear HSEIE so that faults do not get signaled */ + val = readl(&xhci->op_regs->command); + val &= ~CMD_HSEIE; + writel(val, &xhci->op_regs->command); + + /* Clear HSE (aka FATAL) */ + val = readl(&xhci->op_regs->status); + val |= STS_FATAL; + writel(val, &xhci->op_regs->status); + + /* Now zero the registers, and brace for impact */ + val = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); + val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring); + + for (i = 0; i < HCS_MAX_INTRS(xhci->hcs_params1); i++) { + struct xhci_intr_reg __iomem *ir; + + ir = &xhci->run_regs->ir_set[i]; + val = xhci_read_64(xhci, &ir->erst_base); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &ir->erst_base); + val= xhci_read_64(xhci, &ir->erst_dequeue); + if (upper_32_bits(val)) + xhci_write_64(xhci, 0, &ir->erst_dequeue); + } + + /* Wait for the fault to appear. It will be cleared on reset */ + err = xhci_handshake(&xhci->op_regs->status, + STS_FATAL, STS_FATAL, + XHCI_MAX_HALT_USEC); + if (!err) + xhci_info(xhci, "Fault detected\n"); +} #ifdef CONFIG_USB_PCI /* @@ -400,13 +462,15 @@ static void compliance_mode_recovery(struct timer_list *t) { struct xhci_hcd *xhci; struct usb_hcd *hcd; + struct xhci_hub *rhub; u32 temp; int i; xhci = from_timer(xhci, t, comp_mode_recovery_timer); + rhub = &xhci->usb3_rhub; - for (i = 0; i < xhci->num_usb3_ports; i++) { - temp = readl(xhci->usb3_ports[i]); + for (i = 0; i < rhub->num_ports; i++) { + temp = readl(rhub->ports[i]->addr); if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) { /* * Compliance Mode Detected. Letting USB Core @@ -426,7 +490,7 @@ static void compliance_mode_recovery(struct timer_list *t) } } - if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) + if (xhci->port_status_u0 != ((1 << rhub->num_ports) - 1)) mod_timer(&xhci->comp_mode_recovery_timer, jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); } @@ -483,7 +547,7 @@ static bool xhci_compliance_mode_recovery_timer_quirk_check(void) static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) { - return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1)); + return (xhci->port_status_u0 == ((1 << xhci->usb3_rhub.num_ports) - 1)); } @@ -812,33 +876,33 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) { + struct xhci_port **ports; int port_index; - __le32 __iomem **port_array; unsigned long flags; u32 t1, t2; spin_lock_irqsave(&xhci->lock, flags); /* disable usb3 ports Wake bits */ - port_index = xhci->num_usb3_ports; - port_array = xhci->usb3_ports; + port_index = xhci->usb3_rhub.num_ports; + ports = xhci->usb3_rhub.ports; while (port_index--) { - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t1 = xhci_port_state_to_neutral(t1); t2 = t1 & ~PORT_WAKE_BITS; if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } /* disable usb2 ports Wake bits */ - port_index = xhci->num_usb2_ports; - port_array = xhci->usb2_ports; + port_index = xhci->usb2_rhub.num_ports; + ports = xhci->usb2_rhub.ports; while (port_index--) { - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t1 = xhci_port_state_to_neutral(t1); t2 = t1 & ~PORT_WAKE_BITS; if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } spin_unlock_irqrestore(&xhci->lock, flags); @@ -1004,6 +1068,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); + xhci_zero_64b_regs(xhci); xhci_reset(xhci); spin_unlock_irq(&xhci->lock); xhci_cleanup_msix(xhci); @@ -3976,18 +4041,10 @@ static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev) */ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - __le32 __iomem *base_addr = &xhci->op_regs->port_status_base; - __le32 __iomem *addr; - int raw_port; + struct xhci_hub *rhub; - if (hcd->speed < HCD_USB3) - addr = xhci->usb2_ports[port1 - 1]; - else - addr = xhci->usb3_ports[port1 - 1]; - - raw_port = (addr - base_addr)/NUM_PORT_REGS + 1; - return raw_port; + rhub = xhci_get_rhub(hcd); + return rhub->ports[port1 - 1]->hw_portnum + 1; } /* @@ -4120,7 +4177,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, struct usb_device *udev, int enable) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - __le32 __iomem **port_array; + struct xhci_port **ports; __le32 __iomem *pm_addr, *hlpm_addr; u32 pm_val, hlpm_val, field; unsigned int port_num; @@ -4141,11 +4198,11 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, spin_lock_irqsave(&xhci->lock, flags); - port_array = xhci->usb2_ports; + ports = xhci->usb2_rhub.ports; port_num = udev->portnum - 1; - pm_addr = port_array[port_num] + PORTPMSC; + pm_addr = ports[port_num]->addr + PORTPMSC; pm_val = readl(pm_addr); - hlpm_addr = port_array[port_num] + PORTHLPMC; + hlpm_addr = ports[port_num]->addr + PORTHLPMC; field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", @@ -4858,6 +4915,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (usb_hcd_is_primary_hcd(hcd)) { xhci->main_hcd = hcd; + xhci->usb2_rhub.hcd = hcd; /* Mark the first roothub as being USB 2.0. * The xHCI driver will register the USB 3.0 roothub. */ @@ -4883,6 +4941,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) minor_rev, minor_rev ? "Enhanced" : ""); + xhci->usb3_rhub.hcd = hcd; /* xHCI private pointer was set in xhci_pci_probe for the second * registered roothub. */ @@ -4921,6 +4980,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (retval) return retval; + xhci_zero_64b_regs(xhci); + xhci_dbg(xhci, "Resetting HCD\n"); /* Reset the internal HC memory state and registers. */ retval = xhci_reset(xhci); @@ -4963,7 +5024,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) return retval; xhci_dbg(xhci, "Called HCD init\n"); - xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%08x\n", + xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%016llx\n", xhci->hcc_params, xhci->hci_version, xhci->quirks); return 0; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 6dfc4867dbcf..939e2f86b595 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1683,13 +1683,23 @@ static inline unsigned int hcd_index(struct usb_hcd *hcd) else return 1; } +struct xhci_port { + __le32 __iomem *addr; + int hw_portnum; + int hcd_portnum; + struct xhci_hub *rhub; +}; struct xhci_hub { - u8 maj_rev; - u8 min_rev; - u32 *psi; /* array of protocol speed ID entries */ - u8 psi_count; - u8 psi_uid_count; + struct xhci_port **ports; + unsigned int num_ports; + struct usb_hcd *hcd; + /* supported prococol extended capabiliy values */ + u8 maj_rev; + u8 min_rev; + u32 *psi; /* array of protocol speed ID entries */ + u8 psi_count; + u8 psi_uid_count; }; /* There is one xhci_hcd structure per controller */ @@ -1787,12 +1797,12 @@ struct xhci_hcd { #define XHCI_STATE_DYING (1 << 0) #define XHCI_STATE_HALTED (1 << 1) #define XHCI_STATE_REMOVING (1 << 2) - unsigned int quirks; -#define XHCI_LINK_TRB_QUIRK (1 << 0) -#define XHCI_RESET_EP_QUIRK (1 << 1) -#define XHCI_NEC_HOST (1 << 2) -#define XHCI_AMD_PLL_FIX (1 << 3) -#define XHCI_SPURIOUS_SUCCESS (1 << 4) + unsigned long long quirks; +#define XHCI_LINK_TRB_QUIRK BIT_ULL(0) +#define XHCI_RESET_EP_QUIRK BIT_ULL(1) +#define XHCI_NEC_HOST BIT_ULL(2) +#define XHCI_AMD_PLL_FIX BIT_ULL(3) +#define XHCI_SPURIOUS_SUCCESS BIT_ULL(4) /* * Certain Intel host controllers have a limit to the number of endpoint * contexts they can handle. Ideally, they would signal that they can't handle @@ -1802,50 +1812,44 @@ struct xhci_hcd { * commands, reset device commands, disable slot commands, and address device * commands. */ -#define XHCI_EP_LIMIT_QUIRK (1 << 5) -#define XHCI_BROKEN_MSI (1 << 6) -#define XHCI_RESET_ON_RESUME (1 << 7) -#define XHCI_SW_BW_CHECKING (1 << 8) -#define XHCI_AMD_0x96_HOST (1 << 9) -#define XHCI_TRUST_TX_LENGTH (1 << 10) -#define XHCI_LPM_SUPPORT (1 << 11) -#define XHCI_INTEL_HOST (1 << 12) -#define XHCI_SPURIOUS_REBOOT (1 << 13) -#define XHCI_COMP_MODE_QUIRK (1 << 14) -#define XHCI_AVOID_BEI (1 << 15) -#define XHCI_PLAT (1 << 16) -#define XHCI_SLOW_SUSPEND (1 << 17) -#define XHCI_SPURIOUS_WAKEUP (1 << 18) +#define XHCI_EP_LIMIT_QUIRK BIT_ULL(5) +#define XHCI_BROKEN_MSI BIT_ULL(6) +#define XHCI_RESET_ON_RESUME BIT_ULL(7) +#define XHCI_SW_BW_CHECKING BIT_ULL(8) +#define XHCI_AMD_0x96_HOST BIT_ULL(9) +#define XHCI_TRUST_TX_LENGTH BIT_ULL(10) +#define XHCI_LPM_SUPPORT BIT_ULL(11) +#define XHCI_INTEL_HOST BIT_ULL(12) +#define XHCI_SPURIOUS_REBOOT BIT_ULL(13) +#define XHCI_COMP_MODE_QUIRK BIT_ULL(14) +#define XHCI_AVOID_BEI BIT_ULL(15) +#define XHCI_PLAT BIT_ULL(16) +#define XHCI_SLOW_SUSPEND BIT_ULL(17) +#define XHCI_SPURIOUS_WAKEUP BIT_ULL(18) /* For controllers with a broken beyond repair streams implementation */ -#define XHCI_BROKEN_STREAMS (1 << 19) -#define XHCI_PME_STUCK_QUIRK (1 << 20) -#define XHCI_MTK_HOST (1 << 21) -#define XHCI_SSIC_PORT_UNUSED (1 << 22) -#define XHCI_NO_64BIT_SUPPORT (1 << 23) -#define XHCI_MISSING_CAS (1 << 24) +#define XHCI_BROKEN_STREAMS BIT_ULL(19) +#define XHCI_PME_STUCK_QUIRK BIT_ULL(20) +#define XHCI_MTK_HOST BIT_ULL(21) +#define XHCI_SSIC_PORT_UNUSED BIT_ULL(22) +#define XHCI_NO_64BIT_SUPPORT BIT_ULL(23) +#define XHCI_MISSING_CAS BIT_ULL(24) /* For controller with a broken Port Disable implementation */ -#define XHCI_BROKEN_PORT_PED (1 << 25) -#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26) -#define XHCI_U2_DISABLE_WAKE (1 << 27) -#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28) -#define XHCI_HW_LPM_DISABLE (1 << 29) -#define XHCI_SUSPEND_DELAY (1 << 30) -#define XHCI_INTEL_USB_ROLE_SW (1 << 31) +#define XHCI_BROKEN_PORT_PED BIT_ULL(25) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26) +#define XHCI_U2_DISABLE_WAKE BIT_ULL(27) +#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL BIT_ULL(28) +#define XHCI_HW_LPM_DISABLE BIT_ULL(29) +#define XHCI_SUSPEND_DELAY BIT_ULL(30) +#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) +#define XHCI_ZERO_64B_REGS BIT_ULL(32) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ struct xhci_bus_state bus_state[2]; - /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ - u8 *port_array; - /* Array of pointers to USB 3.0 PORTSC registers */ - __le32 __iomem **usb3_ports; - unsigned int num_usb3_ports; - /* Array of pointers to USB 2.0 PORTSC registers */ - __le32 __iomem **usb2_ports; + struct xhci_port *hw_ports; struct xhci_hub usb2_rhub; struct xhci_hub usb3_rhub; - unsigned int num_usb2_ports; /* support xHCI 0.96 spec USB2 software LPM */ unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ @@ -2091,14 +2095,16 @@ void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring); unsigned int count_trbs(u64 addr, u64 len); /* xHCI roothub code */ -void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 link_state); -void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 port_bit); +void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port, + u32 link_state); +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, + u32 port_bit); int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); +struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd); + void xhci_hc_died(struct xhci_hcd *xhci); #ifdef CONFIG_PM diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c index 05d22589b5cc..55b94fd10331 100644 --- a/drivers/usb/isp1760/isp1760-core.c +++ b/drivers/usb/isp1760/isp1760-core.c @@ -31,7 +31,7 @@ static void isp1760_init_core(struct isp1760_device *isp) /* Low-level chip reset */ if (isp->rst_gpio) { gpiod_set_value_cansleep(isp->rst_gpio, 1); - mdelay(50); + msleep(50); gpiod_set_value_cansleep(isp->rst_gpio, 0); } diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c index 42672d6ec525..1045521be293 100644 --- a/drivers/usb/isp1760/isp1760-hcd.c +++ b/drivers/usb/isp1760/isp1760-hcd.c @@ -2093,7 +2093,7 @@ static void isp1760_stop(struct usb_hcd *hcd) isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1, NULL, 0); - mdelay(20); + msleep(20); spin_lock_irq(&priv->lock); ehci_reset(hcd); diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 3e65bdc2615c..f92c5df26320 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2107,7 +2107,7 @@ static void sisusb_get_ramconfig(struct sisusb_usb_data *sisusb) bw = busSDR[(tmp8 & 0x03)]; break; case 2: - ramtypetext1 = "asymmeric"; + ramtypetext1 = "asymmetric"; sisusb->vramsize += sisusb->vramsize/2; bw = busDDRA[(tmp8 & 0x03)]; break; diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 2761fad66b95..34e866ad4a81 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1227,7 +1227,7 @@ static void mon_bin_vma_close(struct vm_area_struct *vma) /* * Map ring pages to user space. */ -static int mon_bin_vma_fault(struct vm_fault *vmf) +static vm_fault_t mon_bin_vma_fault(struct vm_fault *vmf) { struct mon_reader_bin *rp = vmf->vma->vm_private_data; unsigned long offset, chunk_idx; diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 984f7e12a6a5..bc5ecd5ff565 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -700,7 +700,6 @@ static const struct file_operations mon_fops_text_u = { int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus) { - struct dentry *d; enum { NAMESZ = 10 }; char name[NAMESZ]; int busnum = ubus? ubus->busnum: 0; @@ -713,42 +712,32 @@ int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus) rc = snprintf(name, NAMESZ, "%dt", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_t; - d = debugfs_create_file(name, 0600, mon_dir, mbus, + mbus->dent_t = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_t); - if (d == NULL) - goto err_create_t; - mbus->dent_t = d; } rc = snprintf(name, NAMESZ, "%du", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_u; - d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_u); - if (d == NULL) - goto err_create_u; - mbus->dent_u = d; + mbus->dent_u = debugfs_create_file(name, 0600, mon_dir, mbus, + &mon_fops_text_u); rc = snprintf(name, NAMESZ, "%ds", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_s; - d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_stat); - if (d == NULL) - goto err_create_s; - mbus->dent_s = d; + mbus->dent_s = debugfs_create_file(name, 0600, mon_dir, mbus, + &mon_fops_stat); return 1; -err_create_s: err_print_s: debugfs_remove(mbus->dent_u); mbus->dent_u = NULL; -err_create_u: err_print_u: if (ubus != NULL) { debugfs_remove(mbus->dent_t); mbus->dent_t = NULL; } -err_create_t: err_print_t: return 0; } @@ -756,8 +745,7 @@ err_print_t: void mon_text_del(struct mon_bus *mbus) { debugfs_remove(mbus->dent_u); - if (mbus->dent_t != NULL) - debugfs_remove(mbus->dent_t); + debugfs_remove(mbus->dent_t); debugfs_remove(mbus->dent_s); } @@ -775,18 +763,7 @@ static void mon_text_ctor(void *mem) int __init mon_text_init(void) { - struct dentry *mondir; - - mondir = debugfs_create_dir("usbmon", usb_debug_root); - if (IS_ERR(mondir)) { - /* debugfs not available, but we can use usbmon without it */ - return 0; - } - if (mondir == NULL) { - printk(KERN_NOTICE TAG ": unable to create usbmon directory\n"); - return -ENOMEM; - } - mon_dir = mondir; + mon_dir = debugfs_create_dir("usbmon", usb_debug_root); return 0; } diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig index 25cd61947bee..40bbf1f53337 100644 --- a/drivers/usb/mtu3/Kconfig +++ b/drivers/usb/mtu3/Kconfig @@ -2,7 +2,7 @@ config USB_MTU3 tristate "MediaTek USB3 Dual Role controller" - depends on EXTCON && (USB || USB_GADGET) && HAS_DMA + depends on USB || USB_GADGET depends on ARCH_MEDIATEK || COMPILE_TEST select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD help @@ -40,6 +40,7 @@ config USB_MTU3_GADGET config USB_MTU3_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3)) + depends on (EXTCON=y || EXTCON=USB_MTU3) help This is the default mode of working of MTU3 controller where both host and gadget features are enabled. diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h index 2cd00a24afd9..87823ac0d120 100644 --- a/drivers/usb/mtu3/mtu3.h +++ b/drivers/usb/mtu3/mtu3.h @@ -196,10 +196,12 @@ struct mtu3_gpd_ring { * @vbus: vbus 5V used by host mode * @edev: external connector used to detect vbus and iddig changes * @vbus_nb: notifier for vbus detection -* @vbus_nb: notifier for iddig(idpin) detection -* @extcon_reg_dwork: delay work for extcon notifier register, waiting for -* xHCI driver initialization, it's necessary for system bootup -* as device. +* @vbus_work : work of vbus detection notifier, used to avoid sleep in +* notifier callback which is atomic context +* @vbus_event : event of vbus detecion notifier +* @id_nb : notifier for iddig(idpin) detection +* @id_work : work of iddig detection notifier +* @id_event : event of iddig detecion notifier * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not * @manual_drd_enabled: it's true when supports dual-role device by debugfs * to switch host/device modes depending on user input. @@ -208,8 +210,11 @@ struct otg_switch_mtk { struct regulator *vbus; struct extcon_dev *edev; struct notifier_block vbus_nb; + struct work_struct vbus_work; + unsigned long vbus_event; struct notifier_block id_nb; - struct delayed_work extcon_reg_dwork; + struct work_struct id_work; + unsigned long id_event; bool is_u3_drd; bool manual_drd_enabled; }; diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index b1b99a8f6a7a..eecfd0671362 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -176,7 +176,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_LV1IESR, value); /* Enable U2 common USB interrupts */ - value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; + value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR; mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); if (mtu->is_u3_ip) { @@ -195,6 +195,16 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR); } +/* reset: u2 - data toggle, u3 - SeqN, flow control status etc */ +static void mtu3_ep_reset(struct mtu3_ep *mep) +{ + struct mtu3 *mtu = mep->mtu; + u32 rst_bit = EP_RST(mep->is_in, mep->epnum); + + mtu3_setbits(mtu->mac_base, U3D_EP_RST, rst_bit); + mtu3_clrbits(mtu->mac_base, U3D_EP_RST, rst_bit); +} + /* set/clear the stall and toggle bits for non-ep0 */ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) { @@ -220,8 +230,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) } if (!set) { - mtu3_setbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum)); - mtu3_clrbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum)); + mtu3_ep_reset(mep); mep->flags &= ~MTU3_EP_STALL; } else { mep->flags |= MTU3_EP_STALL; @@ -400,6 +409,7 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep) mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum)); } + mtu3_ep_reset(mep); ep_fifo_free(mep); dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name); @@ -658,8 +668,10 @@ static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu) if (ltssm & (HOT_RST_INTR | WARM_RST_INTR)) mtu3_gadget_reset(mtu); - if (ltssm & VBUS_FALL_INTR) + if (ltssm & VBUS_FALL_INTR) { mtu3_ss_func_set(mtu, false); + mtu3_gadget_reset(mtu); + } if (ltssm & VBUS_RISE_INTR) mtu3_ss_func_set(mtu, true); @@ -692,6 +704,12 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) if (u2comm & RESET_INTR) mtu3_gadget_reset(mtu); + if (u2comm & LPM_RESUME_INTR) { + if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE)) + mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL, + LPM_U3_ACK_EN); + } + return IRQ_HANDLED; } diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c index db7562d99b95..ac60e9c8564e 100644 --- a/drivers/usb/mtu3/mtu3_dr.c +++ b/drivers/usb/mtu3/mtu3_dr.c @@ -174,16 +174,40 @@ static void ssusb_set_mailbox(struct otg_switch_mtk *otg_sx, } } -static int ssusb_id_notifier(struct notifier_block *nb, - unsigned long event, void *ptr) +static void ssusb_id_work(struct work_struct *work) { struct otg_switch_mtk *otg_sx = - container_of(nb, struct otg_switch_mtk, id_nb); + container_of(work, struct otg_switch_mtk, id_work); - if (event) + if (otg_sx->id_event) ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND); else ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT); +} + +static void ssusb_vbus_work(struct work_struct *work) +{ + struct otg_switch_mtk *otg_sx = + container_of(work, struct otg_switch_mtk, vbus_work); + + if (otg_sx->vbus_event) + ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID); + else + ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF); +} + +/* + * @ssusb_id_notifier is called in atomic context, but @ssusb_set_mailbox + * may sleep, so use work queue here + */ +static int ssusb_id_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct otg_switch_mtk *otg_sx = + container_of(nb, struct otg_switch_mtk, id_nb); + + otg_sx->id_event = event; + schedule_work(&otg_sx->id_work); return NOTIFY_DONE; } @@ -194,10 +218,8 @@ static int ssusb_vbus_notifier(struct notifier_block *nb, struct otg_switch_mtk *otg_sx = container_of(nb, struct otg_switch_mtk, vbus_nb); - if (event) - ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID); - else - ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF); + otg_sx->vbus_event = event; + schedule_work(&otg_sx->vbus_work); return NOTIFY_DONE; } @@ -238,15 +260,6 @@ static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx) return 0; } -static void extcon_register_dwork(struct work_struct *work) -{ - struct delayed_work *dwork = to_delayed_work(work); - struct otg_switch_mtk *otg_sx = - container_of(dwork, struct otg_switch_mtk, extcon_reg_dwork); - - ssusb_extcon_register(otg_sx); -} - /* * We provide an interface via debugfs to switch between host and device modes * depending on user input. @@ -365,10 +378,6 @@ static void ssusb_debugfs_init(struct ssusb_mtk *ssusb) struct dentry *root; root = debugfs_create_dir(dev_name(ssusb->dev), usb_debug_root); - if (!root) { - dev_err(ssusb->dev, "create debugfs root failed\n"); - return; - } ssusb->dbgfs_root = root; debugfs_create_file("mode", 0644, root, ssusb, &ssusb_mode_fops); @@ -407,18 +416,13 @@ int ssusb_otg_switch_init(struct ssusb_mtk *ssusb) { struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; - if (otg_sx->manual_drd_enabled) { + INIT_WORK(&otg_sx->id_work, ssusb_id_work); + INIT_WORK(&otg_sx->vbus_work, ssusb_vbus_work); + + if (otg_sx->manual_drd_enabled) ssusb_debugfs_init(ssusb); - } else { - INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork, - extcon_register_dwork); - - /* - * It is enough to delay 1s for waiting for - * host initialization - */ - schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ); - } + else + ssusb_extcon_register(otg_sx); return 0; } @@ -429,6 +433,7 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb) if (otg_sx->manual_drd_enabled) ssusb_debugfs_exit(ssusb); - else - cancel_delayed_work(&otg_sx->extcon_reg_dwork); + + cancel_work_sync(&otg_sx->id_work); + cancel_work_sync(&otg_sx->vbus_work); } diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c index f05f10f5c171..5c60a8c5a0b5 100644 --- a/drivers/usb/mtu3/mtu3_gadget.c +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -660,14 +660,10 @@ int mtu3_gadget_setup(struct mtu3 *mtu) mtu3_gadget_init_eps(mtu); ret = usb_add_gadget_udc(mtu->dev, &mtu->g); - if (ret) { + if (ret) dev_err(mtu->dev, "failed to register udc\n"); - return ret; - } - usb_gadget_set_state(&mtu->g, USB_STATE_NOTATTACHED); - - return 0; + return ret; } void mtu3_gadget_cleanup(struct mtu3 *mtu) @@ -723,4 +719,5 @@ void mtu3_gadget_reset(struct mtu3 *mtu) mtu->u1_enable = 0; mtu->u2_enable = 0; mtu->delayed_status = false; + mtu->test_mode = false; } diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index ebdcf7a38c29..25216e79cd6e 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -7,6 +7,7 @@ * Author: Chunfeng.Yun <chunfeng.yun@mediatek.com> */ +#include <linux/iopoll.h> #include <linux/usb/composite.h> #include "mtu3.h" @@ -263,6 +264,7 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup) { void __iomem *mbase = mtu->mac_base; int handled = 1; + u32 value; switch (le16_to_cpu(setup->wIndex) >> 8) { case TEST_J: @@ -292,6 +294,14 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup) if (mtu->test_mode_nr == TEST_PACKET_MODE) ep0_load_test_packet(mtu); + /* send status before entering test mode. */ + value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS; + mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND); + + /* wait for ACK status sent by host */ + readl_poll_timeout_atomic(mbase + U3D_EP0CSR, value, + !(value & EP0_DATAEND), 100, 5000); + mtu3_writel(mbase, U3D_USB2_TEST_MODE, mtu->test_mode_nr); mtu->ep0_state = MU3D_EP0_STATE_SETUP; @@ -546,7 +556,7 @@ static void ep0_tx_state(struct mtu3 *mtu) struct usb_request *req; u32 csr; u8 *src; - u8 count; + u32 count; u32 maxp; dev_dbg(mtu->dev, "%s\n", __func__); diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index 628d5ce356ca..46551f6d16fd 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -447,8 +447,7 @@ static int mtu3_remove(struct platform_device *pdev) */ static int __maybe_unused mtu3_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); + struct ssusb_mtk *ssusb = dev_get_drvdata(dev); dev_dbg(dev, "%s\n", __func__); @@ -466,8 +465,7 @@ static int __maybe_unused mtu3_suspend(struct device *dev) static int __maybe_unused mtu3_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); + struct ssusb_mtk *ssusb = dev_get_drvdata(dev); int ret; dev_dbg(dev, "%s\n", __func__); diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 0ad664efda6b..660641ab1545 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -201,7 +201,6 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); struct omap_musb_board_data *data = plat->board_data; - struct usb_otg *otg = musb->xceiv->otg; unsigned long flags; irqreturn_t ret = IRQ_NONE; u32 epintr, usbintr; @@ -264,14 +263,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index b8295ce7c4fe..1c023c0091c4 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -223,7 +223,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) { struct musb *musb = hci; void __iomem *reg_base = musb->ctrl_base; - struct usb_otg *otg = musb->xceiv->otg; unsigned long flags; irqreturn_t ret = IRQ_NONE; u32 status; @@ -280,7 +279,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); @@ -295,7 +293,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) */ musb->is_active = 0; MUSB_DEV_MODE(musb); - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 2ad39dcd2f4c..fb6bbd254ab7 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -311,14 +311,12 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; portstate(musb->port1_status |= USB_PORT_STAT_POWER); del_timer(&musb->dev_timer); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); } @@ -425,6 +423,9 @@ unregister: static int davinci_musb_exit(struct musb *musb) { + int maxdelay = 30; + u8 devctl, warn = 0; + del_timer_sync(&musb->dev_timer); /* force VBUS off */ @@ -438,31 +439,27 @@ static int davinci_musb_exit(struct musb *musb) davinci_musb_source_power(musb, 0 /*off*/, 1); - /* delay, to avoid problems with module reload */ - if (musb->xceiv->otg->default_a) { - int maxdelay = 30; - u8 devctl, warn = 0; + /* + * delay, to avoid problems with module reload. + * if there's no peripheral connected, this can take a + * long time to fall, especially on EVM with huge C133. + */ + do { + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if (!(devctl & MUSB_DEVCTL_VBUS)) + break; + if ((devctl & MUSB_DEVCTL_VBUS) != warn) { + warn = devctl & MUSB_DEVCTL_VBUS; + dev_dbg(musb->controller, "VBUS %d\n", + warn >> MUSB_DEVCTL_VBUS_SHIFT); + } + msleep(1000); + maxdelay--; + } while (maxdelay > 0); - /* if there's no peripheral connected, this can take a - * long time to fall, especially on EVM with huge C133. - */ - do { - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (!(devctl & MUSB_DEVCTL_VBUS)) - break; - if ((devctl & MUSB_DEVCTL_VBUS) != warn) { - warn = devctl & MUSB_DEVCTL_VBUS; - dev_dbg(musb->controller, "VBUS %d\n", - warn >> MUSB_DEVCTL_VBUS_SHIFT); - } - msleep(1000); - maxdelay--; - } while (maxdelay > 0); - - /* in OTG mode, another host might be connected */ - if (devctl & MUSB_DEVCTL_VBUS) - dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl); - } + /* in OTG mode, another host might be connected */ + if (devctl & MUSB_DEVCTL_VBUS) + dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl); phy_off(); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fb5e4523dc28..b7d56272f9d1 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -274,20 +274,6 @@ static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data) __raw_writew(data, addr + offset); } -static u32 musb_default_readl(const void __iomem *addr, unsigned offset) -{ - u32 data = __raw_readl(addr + offset); - - trace_musb_readl(__builtin_return_address(0), addr, offset, data); - return data; -} - -static void musb_default_writel(void __iomem *addr, unsigned offset, u32 data) -{ - trace_musb_writel(__builtin_return_address(0), addr, offset, data); - __raw_writel(data, addr + offset); -} - /* * Load an endpoint's FIFO */ @@ -390,10 +376,20 @@ EXPORT_SYMBOL_GPL(musb_readw); void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); EXPORT_SYMBOL_GPL(musb_writew); -u32 (*musb_readl)(const void __iomem *addr, unsigned offset); +u32 musb_readl(const void __iomem *addr, unsigned offset) +{ + u32 data = __raw_readl(addr + offset); + + trace_musb_readl(__builtin_return_address(0), addr, offset, data); + return data; +} EXPORT_SYMBOL_GPL(musb_readl); -void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); +void musb_writel(void __iomem *addr, unsigned offset, u32 data) +{ + trace_musb_writel(__builtin_return_address(0), addr, offset, data); + __raw_writel(data, addr + offset); +} EXPORT_SYMBOL_GPL(musb_writel); #ifndef CONFIG_MUSB_PIO_ONLY @@ -527,6 +523,383 @@ void musb_hnp_stop(struct musb *musb) static void musb_recover_from_babble(struct musb *musb); +static void musb_handle_intr_resume(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "RESUME (%s)", + usb_otg_state_string(musb->xceiv->otg->state)); + + if (devctl & MUSB_DEVCTL_HM) { + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_SUSPEND: + /* remote wakeup? */ + musb->port1_status |= + (USB_PORT_STAT_C_SUSPEND << 16) + | MUSB_PORT_STAT_RESUME; + musb->rh_timer = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + musb->xceiv->otg->state = OTG_STATE_A_HOST; + musb->is_active = 1; + musb_host_resume_root_hub(musb); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(USB_RESUME_TIMEOUT)); + break; + case OTG_STATE_B_WAIT_ACON: + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + musb->is_active = 1; + MUSB_DEV_MODE(musb); + break; + default: + WARNING("bogus %s RESUME (%s)\n", + "host", + usb_otg_state_string(musb->xceiv->otg->state)); + } + } else { + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_SUSPEND: + /* possibly DISCONNECT is upcoming */ + musb->xceiv->otg->state = OTG_STATE_A_HOST; + musb_host_resume_root_hub(musb); + break; + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_PERIPHERAL: + /* disconnect while suspended? we may + * not get a disconnect irq... + */ + if ((devctl & MUSB_DEVCTL_VBUS) + != (3 << MUSB_DEVCTL_VBUS_SHIFT) + ) { + musb->int_usb |= MUSB_INTR_DISCONNECT; + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; + } + musb_g_resume(musb); + break; + case OTG_STATE_B_IDLE: + musb->int_usb &= ~MUSB_INTR_SUSPEND; + break; + default: + WARNING("bogus %s RESUME (%s)\n", + "peripheral", + usb_otg_state_string(musb->xceiv->otg->state)); + } + } +} + +/* return IRQ_HANDLED to tell the caller to return immediately */ +static irqreturn_t musb_handle_intr_sessreq(struct musb *musb, u8 devctl) +{ + void __iomem *mbase = musb->mregs; + + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS + && (devctl & MUSB_DEVCTL_BDEVICE)) { + musb_dbg(musb, "SessReq while on B state"); + return IRQ_HANDLED; + } + + musb_dbg(musb, "SESSION_REQUEST (%s)", + usb_otg_state_string(musb->xceiv->otg->state)); + + /* IRQ arrives from ID pin sense or (later, if VBUS power + * is removed) SRP. responses are time critical: + * - turn on VBUS (with silicon-specific mechanism) + * - go through A_WAIT_VRISE + * - ... to A_WAIT_BCON. + * a_wait_vrise_tmout triggers VBUS_ERROR transitions + */ + musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); + musb->ep0_stage = MUSB_EP0_START; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + musb_platform_set_vbus(musb, 1); + + return IRQ_NONE; +} + +static void musb_handle_intr_vbuserr(struct musb *musb, u8 devctl) +{ + int ignore = 0; + + /* During connection as an A-Device, we may see a short + * current spikes causing voltage drop, because of cable + * and peripheral capacitance combined with vbus draw. + * (So: less common with truly self-powered devices, where + * vbus doesn't act like a power supply.) + * + * Such spikes are short; usually less than ~500 usec, max + * of ~2 msec. That is, they're not sustained overcurrent + * errors, though they're reported using VBUSERROR irqs. + * + * Workarounds: (a) hardware: use self powered devices. + * (b) software: ignore non-repeated VBUS errors. + * + * REVISIT: do delays from lots of DEBUG_KERNEL checks + * make trouble here, keeping VBUS < 4.4V ? + */ + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_HOST: + /* recovery is dicey once we've gotten past the + * initial stages of enumeration, but if VBUS + * stayed ok at the other end of the link, and + * another reset is due (at least for high speed, + * to redo the chirp etc), it might work OK... + */ + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_WAIT_VRISE: + if (musb->vbuserr_retry) { + void __iomem *mbase = musb->mregs; + + musb->vbuserr_retry--; + ignore = 1; + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(mbase, MUSB_DEVCTL, devctl); + } else { + musb->port1_status |= + USB_PORT_STAT_OVERCURRENT + | (USB_PORT_STAT_C_OVERCURRENT << 16); + } + break; + default: + break; + } + + dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, + "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", + usb_otg_state_string(musb->xceiv->otg->state), + devctl, + ({ char *s; + switch (devctl & MUSB_DEVCTL_VBUS) { + case 0 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<SessEnd"; break; + case 1 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<AValid"; break; + case 2 << MUSB_DEVCTL_VBUS_SHIFT: + s = "<VBusValid"; break; + /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ + default: + s = "VALID"; break; + } s; }), + VBUSERR_RETRY_COUNT - musb->vbuserr_retry, + musb->port1_status); + + /* go through A_WAIT_VFALL then start a new session */ + if (!ignore) + musb_platform_set_vbus(musb, 0); +} + +static void musb_handle_intr_suspend(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "SUSPEND (%s) devctl %02x", + usb_otg_state_string(musb->xceiv->otg->state), devctl); + + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_PERIPHERAL: + /* We also come here if the cable is removed, since + * this silicon doesn't report ID-no-longer-grounded. + * + * We depend on T(a_wait_bcon) to shut us down, and + * hope users don't do anything dicey during this + * undesired detour through A_WAIT_BCON. + */ + musb_hnp_stop(musb); + musb_host_resume_root_hub(musb); + musb_root_disconnect(musb); + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon + ? : OTG_TIME_A_WAIT_BCON)); + + break; + case OTG_STATE_B_IDLE: + if (!musb->is_active) + break; + /* fall through */ + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = musb->g.b_hnp_enable; + if (musb->is_active) { + musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; + musb_dbg(musb, "HNP: Setting timer for b_ase0_brst"); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies( + OTG_TIME_B_ASE0_BRST)); + } + break; + case OTG_STATE_A_WAIT_BCON: + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: + musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; + musb->is_active = musb->hcd->self.b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ + musb_dbg(musb, "REVISIT: SUSPEND as B_HOST"); + break; + default: + /* "should not happen" */ + musb->is_active = 0; + break; + } +} + +static void musb_handle_intr_connect(struct musb *musb, u8 devctl, u8 int_usb) +{ + struct usb_hcd *hcd = musb->hcd; + + musb->is_active = 1; + musb->ep0_stage = MUSB_EP0_START; + + musb->intrtxe = musb->epmask; + musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); + musb->intrrxe = musb->epmask & 0xfffe; + musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); + musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); + musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED + |USB_PORT_STAT_HIGH_SPEED + |USB_PORT_STAT_ENABLE + ); + musb->port1_status |= USB_PORT_STAT_CONNECTION + |(USB_PORT_STAT_C_CONNECTION << 16); + + /* high vs full speed is just a guess until after reset */ + if (devctl & MUSB_DEVCTL_LSDEV) + musb->port1_status |= USB_PORT_STAT_LOW_SPEED; + + /* indicate new connection to OTG machine */ + switch (musb->xceiv->otg->state) { + case OTG_STATE_B_PERIPHERAL: + if (int_usb & MUSB_INTR_SUSPEND) { + musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host"); + int_usb &= ~MUSB_INTR_SUSPEND; + goto b_host; + } else + musb_dbg(musb, "CONNECT as b_peripheral???"); + break; + case OTG_STATE_B_WAIT_ACON: + musb_dbg(musb, "HNP: CONNECT, now b_host"); +b_host: + musb->xceiv->otg->state = OTG_STATE_B_HOST; + if (musb->hcd) + musb->hcd->self.is_b_host = 1; + del_timer(&musb->otg_timer); + break; + default: + if ((devctl & MUSB_DEVCTL_VBUS) + == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { + musb->xceiv->otg->state = OTG_STATE_A_HOST; + if (hcd) + hcd->self.is_b_host = 0; + } + break; + } + + musb_host_poke_root_hub(musb); + + musb_dbg(musb, "CONNECT (%s) devctl %02x", + usb_otg_state_string(musb->xceiv->otg->state), devctl); +} + +static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl) +{ + musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x", + usb_otg_state_string(musb->xceiv->otg->state), + MUSB_MODE(musb), devctl); + + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: + musb_host_resume_root_hub(musb); + musb_root_disconnect(musb); + if (musb->a_wait_bcon != 0) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_B_HOST: + /* REVISIT this behaves for "real disconnect" + * cases; make sure the other transitions from + * from B_HOST act right too. The B_HOST code + * in hnp_stop() is currently not used... + */ + musb_root_disconnect(musb); + if (musb->hcd) + musb->hcd->self.is_b_host = 0; + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + MUSB_DEV_MODE(musb); + musb_g_disconnect(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); + musb_root_disconnect(musb); + /* FALLTHROUGH */ + case OTG_STATE_B_WAIT_ACON: + /* FALLTHROUGH */ + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: + musb_g_disconnect(musb); + break; + default: + WARNING("unhandled DISCONNECT transition (%s)\n", + usb_otg_state_string(musb->xceiv->otg->state)); + break; + } +} + +/* + * mentor saves a bit: bus reset and babble share the same irq. + * only host sees babble; only peripheral sees bus reset. + */ +static void musb_handle_intr_reset(struct musb *musb) +{ + if (is_host_active(musb)) { + /* + * When BABBLE happens what we can depends on which + * platform MUSB is running, because some platforms + * implemented proprietary means for 'recovering' from + * Babble conditions. One such platform is AM335x. In + * most cases, however, the only thing we can do is + * drop the session. + */ + dev_err(musb->controller, "Babble\n"); + musb_recover_from_babble(musb); + } else { + musb_dbg(musb, "BUS RESET as %s", + usb_otg_state_string(musb->xceiv->otg->state)); + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_SUSPEND: + musb_g_reset(musb); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ + /* never use invalid T(a_wait_bcon) */ + musb_dbg(musb, "HNP: in %s, %d msec timeout", + usb_otg_state_string(musb->xceiv->otg->state), + TA_WAIT_BCON(musb)); + mod_timer(&musb->otg_timer, jiffies + + msecs_to_jiffies(TA_WAIT_BCON(musb))); + break; + case OTG_STATE_A_PERIPHERAL: + del_timer(&musb->otg_timer); + musb_g_reset(musb); + break; + case OTG_STATE_B_WAIT_ACON: + musb_dbg(musb, "HNP: RESET (%s), to b_peripheral", + usb_otg_state_string(musb->xceiv->otg->state)); + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + musb_g_reset(musb); + break; + case OTG_STATE_B_IDLE: + musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; + /* FALLTHROUGH */ + case OTG_STATE_B_PERIPHERAL: + musb_g_reset(musb); + break; + default: + musb_dbg(musb, "Unhandled BUS RESET as %s", + usb_otg_state_string(musb->xceiv->otg->state)); + } + } +} + /* * Interrupt Service Routine to record USB "global" interrupts. * Since these do not happen often and signify things of @@ -551,379 +924,40 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, * spurious RESUME irqs happen too, paired with SUSPEND. */ if (int_usb & MUSB_INTR_RESUME) { + musb_handle_intr_resume(musb, devctl); handled = IRQ_HANDLED; - musb_dbg(musb, "RESUME (%s)", - usb_otg_state_string(musb->xceiv->otg->state)); - - if (devctl & MUSB_DEVCTL_HM) { - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - /* remote wakeup? */ - musb->port1_status |= - (USB_PORT_STAT_C_SUSPEND << 16) - | MUSB_PORT_STAT_RESUME; - musb->rh_timer = jiffies - + msecs_to_jiffies(USB_RESUME_TIMEOUT); - musb->xceiv->otg->state = OTG_STATE_A_HOST; - musb->is_active = 1; - musb_host_resume_root_hub(musb); - schedule_delayed_work(&musb->finish_resume_work, - msecs_to_jiffies(USB_RESUME_TIMEOUT)); - break; - case OTG_STATE_B_WAIT_ACON: - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - musb->is_active = 1; - MUSB_DEV_MODE(musb); - break; - default: - WARNING("bogus %s RESUME (%s)\n", - "host", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } else { - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - /* possibly DISCONNECT is upcoming */ - musb->xceiv->otg->state = OTG_STATE_A_HOST; - musb_host_resume_root_hub(musb); - break; - case OTG_STATE_B_WAIT_ACON: - case OTG_STATE_B_PERIPHERAL: - /* disconnect while suspended? we may - * not get a disconnect irq... - */ - if ((devctl & MUSB_DEVCTL_VBUS) - != (3 << MUSB_DEVCTL_VBUS_SHIFT) - ) { - musb->int_usb |= MUSB_INTR_DISCONNECT; - musb->int_usb &= ~MUSB_INTR_SUSPEND; - break; - } - musb_g_resume(musb); - break; - case OTG_STATE_B_IDLE: - musb->int_usb &= ~MUSB_INTR_SUSPEND; - break; - default: - WARNING("bogus %s RESUME (%s)\n", - "peripheral", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } } /* see manual for the order of the tests */ if (int_usb & MUSB_INTR_SESSREQ) { - void __iomem *mbase = musb->mregs; - - if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS - && (devctl & MUSB_DEVCTL_BDEVICE)) { - musb_dbg(musb, "SessReq while on B state"); + if (musb_handle_intr_sessreq(musb, devctl)) return IRQ_HANDLED; - } - - musb_dbg(musb, "SESSION_REQUEST (%s)", - usb_otg_state_string(musb->xceiv->otg->state)); - - /* IRQ arrives from ID pin sense or (later, if VBUS power - * is removed) SRP. responses are time critical: - * - turn on VBUS (with silicon-specific mechanism) - * - go through A_WAIT_VRISE - * - ... to A_WAIT_BCON. - * a_wait_vrise_tmout triggers VBUS_ERROR transitions - */ - musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); - musb->ep0_stage = MUSB_EP0_START; - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - MUSB_HST_MODE(musb); - musb_platform_set_vbus(musb, 1); - handled = IRQ_HANDLED; } if (int_usb & MUSB_INTR_VBUSERROR) { - int ignore = 0; - - /* During connection as an A-Device, we may see a short - * current spikes causing voltage drop, because of cable - * and peripheral capacitance combined with vbus draw. - * (So: less common with truly self-powered devices, where - * vbus doesn't act like a power supply.) - * - * Such spikes are short; usually less than ~500 usec, max - * of ~2 msec. That is, they're not sustained overcurrent - * errors, though they're reported using VBUSERROR irqs. - * - * Workarounds: (a) hardware: use self powered devices. - * (b) software: ignore non-repeated VBUS errors. - * - * REVISIT: do delays from lots of DEBUG_KERNEL checks - * make trouble here, keeping VBUS < 4.4V ? - */ - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_HOST: - /* recovery is dicey once we've gotten past the - * initial stages of enumeration, but if VBUS - * stayed ok at the other end of the link, and - * another reset is due (at least for high speed, - * to redo the chirp etc), it might work OK... - */ - case OTG_STATE_A_WAIT_BCON: - case OTG_STATE_A_WAIT_VRISE: - if (musb->vbuserr_retry) { - void __iomem *mbase = musb->mregs; - - musb->vbuserr_retry--; - ignore = 1; - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(mbase, MUSB_DEVCTL, devctl); - } else { - musb->port1_status |= - USB_PORT_STAT_OVERCURRENT - | (USB_PORT_STAT_C_OVERCURRENT << 16); - } - break; - default: - break; - } - - dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, - "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", - usb_otg_state_string(musb->xceiv->otg->state), - devctl, - ({ char *s; - switch (devctl & MUSB_DEVCTL_VBUS) { - case 0 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<SessEnd"; break; - case 1 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<AValid"; break; - case 2 << MUSB_DEVCTL_VBUS_SHIFT: - s = "<VBusValid"; break; - /* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */ - default: - s = "VALID"; break; - } s; }), - VBUSERR_RETRY_COUNT - musb->vbuserr_retry, - musb->port1_status); - - /* go through A_WAIT_VFALL then start a new session */ - if (!ignore) - musb_platform_set_vbus(musb, 0); + musb_handle_intr_vbuserr(musb, devctl); handled = IRQ_HANDLED; } if (int_usb & MUSB_INTR_SUSPEND) { - musb_dbg(musb, "SUSPEND (%s) devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), devctl); + musb_handle_intr_suspend(musb, devctl); handled = IRQ_HANDLED; - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_PERIPHERAL: - /* We also come here if the cable is removed, since - * this silicon doesn't report ID-no-longer-grounded. - * - * We depend on T(a_wait_bcon) to shut us down, and - * hope users don't do anything dicey during this - * undesired detour through A_WAIT_BCON. - */ - musb_hnp_stop(musb); - musb_host_resume_root_hub(musb); - musb_root_disconnect(musb); - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon - ? : OTG_TIME_A_WAIT_BCON)); - - break; - case OTG_STATE_B_IDLE: - if (!musb->is_active) - break; - /* fall through */ - case OTG_STATE_B_PERIPHERAL: - musb_g_suspend(musb); - musb->is_active = musb->g.b_hnp_enable; - if (musb->is_active) { - musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON; - musb_dbg(musb, "HNP: Setting timer for b_ase0_brst"); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies( - OTG_TIME_B_ASE0_BRST)); - } - break; - case OTG_STATE_A_WAIT_BCON: - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_A_HOST: - musb->xceiv->otg->state = OTG_STATE_A_SUSPEND; - musb->is_active = musb->hcd->self.b_hnp_enable; - break; - case OTG_STATE_B_HOST: - /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ - musb_dbg(musb, "REVISIT: SUSPEND as B_HOST"); - break; - default: - /* "should not happen" */ - musb->is_active = 0; - break; - } } if (int_usb & MUSB_INTR_CONNECT) { - struct usb_hcd *hcd = musb->hcd; - + musb_handle_intr_connect(musb, devctl, int_usb); handled = IRQ_HANDLED; - musb->is_active = 1; - - musb->ep0_stage = MUSB_EP0_START; - - musb->intrtxe = musb->epmask; - musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); - musb->intrrxe = musb->epmask & 0xfffe; - musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); - musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); - musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED - |USB_PORT_STAT_HIGH_SPEED - |USB_PORT_STAT_ENABLE - ); - musb->port1_status |= USB_PORT_STAT_CONNECTION - |(USB_PORT_STAT_C_CONNECTION << 16); - - /* high vs full speed is just a guess until after reset */ - if (devctl & MUSB_DEVCTL_LSDEV) - musb->port1_status |= USB_PORT_STAT_LOW_SPEED; - - /* indicate new connection to OTG machine */ - switch (musb->xceiv->otg->state) { - case OTG_STATE_B_PERIPHERAL: - if (int_usb & MUSB_INTR_SUSPEND) { - musb_dbg(musb, "HNP: SUSPEND+CONNECT, now b_host"); - int_usb &= ~MUSB_INTR_SUSPEND; - goto b_host; - } else - musb_dbg(musb, "CONNECT as b_peripheral???"); - break; - case OTG_STATE_B_WAIT_ACON: - musb_dbg(musb, "HNP: CONNECT, now b_host"); -b_host: - musb->xceiv->otg->state = OTG_STATE_B_HOST; - if (musb->hcd) - musb->hcd->self.is_b_host = 1; - del_timer(&musb->otg_timer); - break; - default: - if ((devctl & MUSB_DEVCTL_VBUS) - == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { - musb->xceiv->otg->state = OTG_STATE_A_HOST; - if (hcd) - hcd->self.is_b_host = 0; - } - break; - } - - musb_host_poke_root_hub(musb); - - musb_dbg(musb, "CONNECT (%s) devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), devctl); } if (int_usb & MUSB_INTR_DISCONNECT) { - musb_dbg(musb, "DISCONNECT (%s) as %s, devctl %02x", - usb_otg_state_string(musb->xceiv->otg->state), - MUSB_MODE(musb), devctl); + musb_handle_intr_disconnect(musb, devctl); handled = IRQ_HANDLED; - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_HOST: - case OTG_STATE_A_SUSPEND: - musb_host_resume_root_hub(musb); - musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0) - musb_platform_try_idle(musb, jiffies - + msecs_to_jiffies(musb->a_wait_bcon)); - break; - case OTG_STATE_B_HOST: - /* REVISIT this behaves for "real disconnect" - * cases; make sure the other transitions from - * from B_HOST act right too. The B_HOST code - * in hnp_stop() is currently not used... - */ - musb_root_disconnect(musb); - if (musb->hcd) - musb->hcd->self.is_b_host = 0; - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - MUSB_DEV_MODE(musb); - musb_g_disconnect(musb); - break; - case OTG_STATE_A_PERIPHERAL: - musb_hnp_stop(musb); - musb_root_disconnect(musb); - /* FALLTHROUGH */ - case OTG_STATE_B_WAIT_ACON: - /* FALLTHROUGH */ - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_IDLE: - musb_g_disconnect(musb); - break; - default: - WARNING("unhandled DISCONNECT transition (%s)\n", - usb_otg_state_string(musb->xceiv->otg->state)); - break; - } } - /* mentor saves a bit: bus reset and babble share the same irq. - * only host sees babble; only peripheral sees bus reset. - */ if (int_usb & MUSB_INTR_RESET) { + musb_handle_intr_reset(musb); handled = IRQ_HANDLED; - if (is_host_active(musb)) { - /* - * When BABBLE happens what we can depends on which - * platform MUSB is running, because some platforms - * implemented proprietary means for 'recovering' from - * Babble conditions. One such platform is AM335x. In - * most cases, however, the only thing we can do is - * drop the session. - */ - dev_err(musb->controller, "Babble\n"); - musb_recover_from_babble(musb); - } else { - musb_dbg(musb, "BUS RESET as %s", - usb_otg_state_string(musb->xceiv->otg->state)); - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_SUSPEND: - musb_g_reset(musb); - /* FALLTHROUGH */ - case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ - /* never use invalid T(a_wait_bcon) */ - musb_dbg(musb, "HNP: in %s, %d msec timeout", - usb_otg_state_string(musb->xceiv->otg->state), - TA_WAIT_BCON(musb)); - mod_timer(&musb->otg_timer, jiffies - + msecs_to_jiffies(TA_WAIT_BCON(musb))); - break; - case OTG_STATE_A_PERIPHERAL: - del_timer(&musb->otg_timer); - musb_g_reset(musb); - break; - case OTG_STATE_B_WAIT_ACON: - musb_dbg(musb, "HNP: RESET (%s), to b_peripheral", - usb_otg_state_string(musb->xceiv->otg->state)); - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - musb_g_reset(musb); - break; - case OTG_STATE_B_IDLE: - musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; - /* FALLTHROUGH */ - case OTG_STATE_B_PERIPHERAL: - musb_g_reset(musb); - break; - default: - musb_dbg(musb, "Unhandled BUS RESET as %s", - usb_otg_state_string(musb->xceiv->otg->state)); - } - } } #if 0 @@ -1042,7 +1076,7 @@ void musb_start(struct musb *musb) * (b) vbus present/connect IRQ, peripheral mode; * (c) peripheral initiates, using SRP */ - if (musb->port_mode != MUSB_PORT_MODE_HOST && + if (musb->port_mode != MUSB_HOST && musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON && (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) { musb->is_active = 1; @@ -1244,25 +1278,25 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep, /* REVISIT error check: be sure ep0 can both rx and tx ... */ switch (cfg->style) { case FIFO_TX: - musb_write_txfifosz(mbase, c_size); - musb_write_txfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_tx = maxpacket; break; case FIFO_RX: - musb_write_rxfifosz(mbase, c_size); - musb_write_rxfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_rx = maxpacket; break; case FIFO_RXTX: - musb_write_txfifosz(mbase, c_size); - musb_write_txfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); + musb_writew(mbase, MUSB_TXFIFOADD, c_off); hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB); hw_ep->max_packet_sz_rx = maxpacket; - musb_write_rxfifosz(mbase, c_size); - musb_write_rxfifoadd(mbase, c_off); + musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); + musb_writew(mbase, MUSB_RXFIFOADD, c_off); hw_ep->tx_double_buffered = hw_ep->rx_double_buffered; hw_ep->max_packet_sz_tx = maxpacket; @@ -1470,7 +1504,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb) } /* log release info */ - musb->hwvers = musb_read_hwvers(mbase); + musb->hwvers = musb_readw(mbase, MUSB_HWVERS); pr_debug("%s: %sHDRC RTL version %d.%d%s\n", musb_driver_name, type, MUSB_HWVERS_MAJOR(musb->hwvers), MUSB_HWVERS_MINOR(musb->hwvers), @@ -1497,7 +1531,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb) hw_ep->fifo = musb->io.fifo_offset(i) + mbase; #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) - if (musb->io.quirks & MUSB_IN_TUSB) { + if (musb->ops->quirks & MUSB_IN_TUSB) { hw_ep->fifo_async = musb->async + 0x400 + musb->io.fifo_offset(i); hw_ep->fifo_sync = musb->sync + 0x400 + @@ -2158,8 +2192,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_writeb = musb_default_writeb; musb_readw = musb_default_readw; musb_writew = musb_default_writew; - musb_readl = musb_default_readl; - musb_writel = musb_default_writel; /* The musb_platform_init() call: * - adjusts musb->mregs @@ -2182,11 +2214,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail2; } - if (musb->ops->quirks) - musb->io.quirks = musb->ops->quirks; /* Most devices use indexed offset or flat offset */ - if (musb->io.quirks & MUSB_INDEXED_EP) { + if (musb->ops->quirks & MUSB_INDEXED_EP) { musb->io.ep_offset = musb_indexed_ep_offset; musb->io.ep_select = musb_indexed_ep_select; } else { @@ -2194,7 +2224,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->io.ep_select = musb_flat_ep_select; } - if (musb->io.quirks & MUSB_G_NO_SKB_RESERVE) + if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE) musb->g.quirk_avoids_skb_reserve = 1; /* At least tusb6010 has its own offsets */ @@ -2226,10 +2256,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readw = musb->ops->readw; if (musb->ops->writew) musb_writew = musb->ops->writew; - if (musb->ops->readl) - musb_readl = musb->ops->readl; - if (musb->ops->writel) - musb_writel = musb->ops->writel; #ifndef CONFIG_MUSB_PIO_ONLY if (!musb->ops->dma_init || !musb->ops->dma_exit) { @@ -2321,33 +2347,28 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* program PHY to use external vBus if required */ if (plat->extvbus) { - u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); + u8 busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); busctl |= MUSB_ULPI_USE_EXTVBUS; - musb_write_ulpi_buscontrol(musb->mregs, busctl); + musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); } - if (musb->xceiv->otg->default_a) { - MUSB_HST_MODE(musb); - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - } else { - MUSB_DEV_MODE(musb); - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - } + MUSB_DEV_MODE(musb); + musb->xceiv->otg->state = OTG_STATE_B_IDLE; switch (musb->port_mode) { - case MUSB_PORT_MODE_HOST: + case MUSB_HOST: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; status = musb_platform_set_mode(musb, MUSB_HOST); break; - case MUSB_PORT_MODE_GADGET: + case MUSB_PERIPHERAL: status = musb_gadget_setup(musb); if (status < 0) goto fail3; status = musb_platform_set_mode(musb, MUSB_PERIPHERAL); break; - case MUSB_PORT_MODE_DUAL_ROLE: + case MUSB_OTG: status = musb_host_setup(musb, plat->power); if (status < 0) goto fail3; @@ -2366,9 +2387,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status < 0) goto fail3; - status = musb_init_debugfs(musb); - if (status < 0) - goto fail4; + musb_init_debugfs(musb); status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); if (status) @@ -2383,7 +2402,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) fail5: musb_exit_debugfs(musb); -fail4: musb_gadget_cleanup(musb); musb_host_cleanup(musb); @@ -2492,7 +2510,7 @@ static void musb_save_context(struct musb *musb) musb->context.frame = musb_readw(musb_base, MUSB_FRAME); musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE); - musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs); + musb->context.busctl = musb_readb(musb_base, MUSB_ULPI_BUSCONTROL); musb->context.power = musb_readb(musb_base, MUSB_POWER); musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); musb->context.index = musb_readb(musb_base, MUSB_INDEX); @@ -2521,13 +2539,13 @@ static void musb_save_context(struct musb *musb) if (musb->dyn_fifo) { musb->context.index_regs[i].txfifoadd = - musb_read_txfifoadd(musb_base); + musb_readw(musb_base, MUSB_TXFIFOADD); musb->context.index_regs[i].rxfifoadd = - musb_read_rxfifoadd(musb_base); + musb_readw(musb_base, MUSB_RXFIFOADD); musb->context.index_regs[i].txfifosz = - musb_read_txfifosz(musb_base); + musb_readb(musb_base, MUSB_TXFIFOSZ); musb->context.index_regs[i].rxfifosz = - musb_read_rxfifosz(musb_base); + musb_readb(musb_base, MUSB_RXFIFOSZ); } musb->context.index_regs[i].txtype = @@ -2564,7 +2582,7 @@ static void musb_restore_context(struct musb *musb) musb_writew(musb_base, MUSB_FRAME, musb->context.frame); musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); - musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); + musb_writeb(musb_base, MUSB_ULPI_BUSCONTROL, musb->context.busctl); /* Don't affect SUSPENDM/RESUME bits in POWER reg */ power = musb_readb(musb_base, MUSB_POWER); @@ -2601,13 +2619,13 @@ static void musb_restore_context(struct musb *musb) musb->context.index_regs[i].rxcsr); if (musb->dyn_fifo) { - musb_write_txfifosz(musb_base, + musb_writeb(musb_base, MUSB_TXFIFOSZ, musb->context.index_regs[i].txfifosz); - musb_write_rxfifosz(musb_base, + musb_writeb(musb_base, MUSB_RXFIFOSZ, musb->context.index_regs[i].rxfifosz); - musb_write_txfifoadd(musb_base, + musb_writew(musb_base, MUSB_TXFIFOADD, musb->context.index_regs[i].txfifoadd); - musb_write_rxfifoadd(musb_base, + musb_writew(musb_base, MUSB_RXFIFOADD, musb->context.index_regs[i].rxfifoadd); } @@ -2657,7 +2675,7 @@ static int musb_suspend(struct device *dev) ; musb->flush_irq_work = false; - if (!(musb->io.quirks & MUSB_PRESERVE_SESSION)) + if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION)) musb_writeb(musb->mregs, MUSB_DEVCTL, 0); WARN_ON(!list_empty(&musb->pending_list)); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 8a74cb2907f8..04203b7126d5 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -53,12 +53,6 @@ struct musb_ep; #define is_peripheral_active(m) (!(m)->is_host) #define is_host_active(m) ((m)->is_host) -enum { - MUSB_PORT_MODE_HOST = 1, - MUSB_PORT_MODE_GADGET, - MUSB_PORT_MODE_DUAL_ROLE, -}; - /****************************** CONSTANTS ********************************/ #ifndef MUSB_C_NUM_EPS @@ -127,8 +121,6 @@ struct musb_io; * @writeb: write 8 bits * @readw: read 16 bits * @writew: write 16 bits - * @readl: read 32 bits - * @writel: write 32 bits * @read_fifo: reads the fifo * @write_fifo: writes to fifo * @dma_init: platform specific dma init function @@ -140,7 +132,6 @@ struct musb_io; * @recover: platform-specific babble recovery * @vbus_status: returns vbus status if possible * @set_vbus: forces vbus status - * @adjust_channel_params: pre check for standard dma channel_program func * @pre_root_reset_end: called before the root usb port reset flag gets cleared * @post_root_reset_end: called after the root usb port reset flag gets cleared * @phy_callback: optional callback function for the phy to call @@ -174,8 +165,6 @@ struct musb_platform_ops { void (*writeb)(void __iomem *addr, unsigned offset, u8 data); u16 (*readw)(const void __iomem *addr, unsigned offset); void (*writew)(void __iomem *addr, unsigned offset, u16 data); - u32 (*readl)(const void __iomem *addr, unsigned offset); - void (*writel)(void __iomem *addr, unsigned offset, u32 data); void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); struct dma_controller * @@ -188,9 +177,6 @@ struct musb_platform_ops { int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); - int (*adjust_channel_params)(struct dma_channel *channel, - u16 packet_sz, u8 *mode, - dma_addr_t *dma_addr, u32 *len); void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); int (*phy_callback)(enum musb_vbus_id_status status); @@ -359,7 +345,7 @@ struct musb { u8 min_power; /* vbus for periph, in mA/2 */ - int port_mode; /* MUSB_PORT_MODE_* */ + enum musb_mode port_mode; bool session; unsigned long quirk_retries; bool is_host; diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index d0dd4f470bbe..7fbb8a307145 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -614,7 +614,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel) } /* DA8xx Advisory 2.3.27: wait 250 ms before to start the teardown */ - if (musb->io.quirks & MUSB_DA8XX) + if (musb->ops->quirks & MUSB_DA8XX) mdelay(250); tdbit = 1 << cppi41_channel->port_num; @@ -773,7 +773,7 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) controller->controller.is_compatible = cppi41_is_compatible; controller->controller.musb = musb; - if (musb->io.quirks & MUSB_DA8XX) { + if (musb->ops->quirks & MUSB_DA8XX) { controller->tdown_reg = DA8XX_USB_TEARDOWN; controller->autoreq_reg = DA8XX_USB_AUTOREQ; controller->set_dma_mode = da8xx_set_dma_mode; diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 5e0f079dde21..c444a80fe1da 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -20,12 +20,11 @@ void musb_dbg(struct musb *musb, const char *fmt, ...); #ifdef CONFIG_DEBUG_FS -int musb_init_debugfs(struct musb *musb); +void musb_init_debugfs(struct musb *musb); void musb_exit_debugfs(struct musb *musb); #else -static inline int musb_init_debugfs(struct musb *musb) +static inline void musb_init_debugfs(struct musb *musb) { - return 0; } static inline void musb_exit_debugfs(struct musb *musb) { diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index e2050cac3eae..f42858e2b54c 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -321,48 +321,18 @@ static const struct file_operations musb_softconnect_fops = { .release = single_release, }; -int musb_init_debugfs(struct musb *musb) +void musb_init_debugfs(struct musb *musb) { - struct dentry *root; - struct dentry *file; - int ret; + struct dentry *root; root = debugfs_create_dir(dev_name(musb->controller), NULL); - if (!root) { - ret = -ENOMEM; - goto err0; - } - - file = debugfs_create_file("regdump", S_IRUGO, root, musb, - &musb_regdump_fops); - if (!file) { - ret = -ENOMEM; - goto err1; - } - - file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, - root, musb, &musb_test_mode_fops); - if (!file) { - ret = -ENOMEM; - goto err1; - } - - file = debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, - root, musb, &musb_softconnect_fops); - if (!file) { - ret = -ENOMEM; - goto err1; - } - musb->debugfs_root = root; - return 0; - -err1: - debugfs_remove_recursive(root); - -err0: - return ret; + debugfs_create_file("regdump", S_IRUGO, root, musb, &musb_regdump_fops); + debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, musb, + &musb_test_mode_fops); + debugfs_create_file("softconnect", S_IRUGO | S_IWUSR, root, musb, + &musb_softconnect_fops); } void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb) diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 0fc8cd0c2a5c..8f60271c0a9d 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -44,31 +44,31 @@ struct musb_hw_ep; #endif #ifdef CONFIG_USB_UX500_DMA -#define musb_dma_ux500(musb) (musb->io.quirks & MUSB_DMA_UX500) +#define musb_dma_ux500(musb) (musb->ops->quirks & MUSB_DMA_UX500) #else #define musb_dma_ux500(musb) 0 #endif #ifdef CONFIG_USB_TI_CPPI41_DMA -#define musb_dma_cppi41(musb) (musb->io.quirks & MUSB_DMA_CPPI41) +#define musb_dma_cppi41(musb) (musb->ops->quirks & MUSB_DMA_CPPI41) #else #define musb_dma_cppi41(musb) 0 #endif #ifdef CONFIG_USB_TI_CPPI_DMA -#define musb_dma_cppi(musb) (musb->io.quirks & MUSB_DMA_CPPI) +#define musb_dma_cppi(musb) (musb->ops->quirks & MUSB_DMA_CPPI) #else #define musb_dma_cppi(musb) 0 #endif #ifdef CONFIG_USB_TUSB_OMAP_DMA -#define tusb_dma_omap(musb) (musb->io.quirks & MUSB_DMA_TUSB_OMAP) +#define tusb_dma_omap(musb) (musb->ops->quirks & MUSB_DMA_TUSB_OMAP) #else #define tusb_dma_omap(musb) 0 #endif #ifdef CONFIG_USB_INVENTRA_DMA -#define musb_dma_inventra(musb) (musb->io.quirks & MUSB_DMA_INVENTRA) +#define musb_dma_inventra(musb) (musb->ops->quirks & MUSB_DMA_INVENTRA) #else #define musb_dma_inventra(musb) 0 #endif diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 6a60bc0490c5..fb871eabcc10 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -183,7 +183,7 @@ static void dsps_musb_enable(struct musb *musb) musb_writel(reg_base, wrp->coreintr_set, coremask); /* start polling for ID change in dual-role idle mode */ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && - musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) + musb->port_mode == MUSB_OTG) dsps_mod_timer(glue, -1); } @@ -231,7 +231,7 @@ static int dsps_check_status(struct musb *musb, void *unused) break; case OTG_STATE_A_WAIT_BCON: /* keep VBUS on for host-only mode */ - if (musb->port_mode == MUSB_PORT_MODE_HOST) { + if (musb->port_mode == MUSB_HOST) { dsps_mod_timer_optional(glue); break; } @@ -360,13 +360,11 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) WARNING("VBUS error workaround (delay coming)\n"); } else if (drvvbus) { MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; dsps_mod_timer_optional(glue); } else { musb->is_active = 0; MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; } @@ -401,24 +399,17 @@ out: static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue) { struct dentry *root; - struct dentry *file; char buf[128]; sprintf(buf, "%s.dsps", dev_name(musb->controller)); root = debugfs_create_dir(buf, NULL); - if (!root) - return -ENOMEM; glue->dbgfs_root = root; glue->regset.regs = dsps_musb_regs; glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs); glue->regset.base = musb->ctrl_base; - file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset); - if (!file) { - debugfs_remove_recursive(root); - return -ENOMEM; - } + debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset); return 0; } @@ -729,25 +720,6 @@ static int get_int_prop(struct device_node *dn, const char *s) return val; } -static int get_musb_port_mode(struct device *dev) -{ - enum usb_dr_mode mode; - - mode = usb_get_dr_mode(dev); - switch (mode) { - case USB_DR_MODE_HOST: - return MUSB_PORT_MODE_HOST; - - case USB_DR_MODE_PERIPHERAL: - return MUSB_PORT_MODE_GADGET; - - case USB_DR_MODE_UNKNOWN: - case USB_DR_MODE_OTG: - default: - return MUSB_PORT_MODE_DUAL_ROLE; - } -} - static int dsps_create_musb_pdev(struct dsps_glue *glue, struct platform_device *parent) { @@ -786,6 +758,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, musb->dev.parent = dev; musb->dev.dma_mask = &musb_dmamask; musb->dev.coherent_dma_mask = musb_dmamask; + device_set_of_node_from_dev(&musb->dev, &parent->dev); glue->musb = musb; @@ -807,7 +780,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, config->num_eps = get_int_prop(dn, "mentor,num-eps"); config->ram_bits = get_int_prop(dn, "mentor,ram-bits"); config->host_port_deassert_reset_at_resume = 1; - pdata.mode = get_musb_port_mode(dev); + pdata.mode = musb_get_mode(dev); /* DT keeps this entry in mA, musb expects it as per USB spec */ pdata.power = get_int_prop(dn, "mentor,power") / 2; @@ -1047,7 +1020,7 @@ static int dsps_resume(struct device *dev) musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode); musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode); if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && - musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) + musb->port_mode == MUSB_OTG) dsps_mod_timer(glue, -1); pm_runtime_put(dev); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 71c5835ea9cd..eae8b1b1b45b 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1794,16 +1794,12 @@ int musb_gadget_setup(struct musb *musb) musb->g.speed = USB_SPEED_UNKNOWN; MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; /* this "gadget" abstracts/virtualizes the controller */ musb->g.name = musb_driver_name; -#if IS_ENABLED(CONFIG_USB_MUSB_DUAL_ROLE) - musb->g.is_otg = 1; -#elif IS_ENABLED(CONFIG_USB_MUSB_GADGET) + /* don't support otg protocols */ musb->g.is_otg = 0; -#endif INIT_DELAYED_WORK(&musb->gadget_work, musb_gadget_work); musb_g_init_endpoints(musb); @@ -1823,7 +1819,7 @@ err: void musb_gadget_cleanup(struct musb *musb) { - if (musb->port_mode == MUSB_PORT_MODE_HOST) + if (musb->port_mode == MUSB_HOST) return; cancel_delayed_work_sync(&musb->gadget_work); diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index 9c34aca06db6..d02663660813 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -60,10 +60,7 @@ struct musb_request { enum buffer_map_state map_state; }; -static inline struct musb_request *to_musb_request(struct usb_request *req) -{ - return req ? container_of(req, struct musb_request, request) : NULL; -} +#define to_musb_request(r) container_of((r), struct musb_request, request) extern struct usb_request * musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags); @@ -99,10 +96,7 @@ struct musb_ep { u8 hb_mult; }; -static inline struct musb_ep *to_musb_ep(struct usb_ep *ep) -{ - return ep ? container_of(ep, struct musb_ep, end_point) : NULL; -} +#define to_musb_ep(ep) container_of((ep), struct musb_ep, end_point) static inline struct musb_request *next_request(struct musb_ep *ep) { diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 15a42cee0a9c..8000c7c02f79 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2735,7 +2735,7 @@ int musb_host_alloc(struct musb *musb) void musb_host_cleanup(struct musb *musb) { - if (musb->port_mode == MUSB_PORT_MODE_GADGET) + if (musb->port_mode == MUSB_PERIPHERAL) return; usb_remove_hcd(musb->hcd); } @@ -2750,13 +2750,13 @@ int musb_host_setup(struct musb *musb, int power_budget) int ret; struct usb_hcd *hcd = musb->hcd; - if (musb->port_mode == MUSB_PORT_MODE_HOST) { + if (musb->port_mode == MUSB_HOST) { MUSB_HST_MODE(musb); - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_IDLE; } otg_set_host(musb->xceiv->otg, &hcd->self); - hcd->self.otg_port = 1; + /* don't support otg protocols */ + hcd->self.otg_port = 0; musb->xceiv->otg->host = &hcd->self; hcd->power_budget = 2 * (power_budget ? : 250); hcd->skip_phy_initialization = 1; diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index b7025b2e6e00..8058a58092cf 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -16,7 +16,6 @@ /** * struct musb_io - IO functions for MUSB - * @quirks: platform specific flags * @ep_offset: platform specific function to get end point offset * @ep_select: platform specific function to select end point * @fifo_offset: platform specific function to get fifo offset @@ -25,7 +24,6 @@ * @busctl_offset: platform specific function to get busctl offset */ struct musb_io { - u32 quirks; u32 (*ep_offset)(u8 epnum, u16 offset); void (*ep_select)(void __iomem *mbase, u8 epnum); u32 (*fifo_offset)(u8 epnum); @@ -39,7 +37,7 @@ extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset); extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset); extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); -extern u32 (*musb_readl)(const void __iomem *addr, unsigned offset); -extern void (*musb_writel)(void __iomem *addr, unsigned offset, u32 data); +extern u32 musb_readl(const void __iomem *addr, unsigned offset); +extern void musb_writel(void __iomem *addr, unsigned offset, u32 data); #endif diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 88466622c89f..5cd7264fc2cb 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -273,67 +273,12 @@ #define MUSB_RXHUBADDR 0x06 #define MUSB_RXHUBPORT 0x07 -static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) -{ - musb_writeb(mbase, MUSB_TXFIFOSZ, c_size); -} - -static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off) -{ - musb_writew(mbase, MUSB_TXFIFOADD, c_off); -} - -static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size) -{ - musb_writeb(mbase, MUSB_RXFIFOSZ, c_size); -} - -static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) -{ - musb_writew(mbase, MUSB_RXFIFOADD, c_off); -} - -static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val) -{ - musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val); -} - -static inline u8 musb_read_txfifosz(void __iomem *mbase) -{ - return musb_readb(mbase, MUSB_TXFIFOSZ); -} - -static inline u16 musb_read_txfifoadd(void __iomem *mbase) -{ - return musb_readw(mbase, MUSB_TXFIFOADD); -} - -static inline u8 musb_read_rxfifosz(void __iomem *mbase) -{ - return musb_readb(mbase, MUSB_RXFIFOSZ); -} - -static inline u16 musb_read_rxfifoadd(void __iomem *mbase) -{ - return musb_readw(mbase, MUSB_RXFIFOADD); -} - -static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase) -{ - return musb_readb(mbase, MUSB_ULPI_BUSCONTROL); -} - static inline u8 musb_read_configdata(void __iomem *mbase) { musb_writeb(mbase, MUSB_INDEX, 0); return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA); } -static inline u16 musb_read_hwvers(void __iomem *mbase) -{ - return musb_readw(mbase, MUSB_HWVERS); -} - static inline void musb_write_rxfunaddr(struct musb *musb, u8 epnum, u8 qh_addr_reg) { diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 2f8dd9826e94..a84ec27c4c12 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -254,7 +254,7 @@ static int musb_has_gadget(struct musb *musb) #ifdef CONFIG_USB_MUSB_HOST return 1; #else - return musb->port_mode == MUSB_PORT_MODE_HOST; + return musb->port_mode == MUSB_HOST; #endif } diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 4389fc3422bd..a688f7f87829 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -10,7 +10,71 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include "musb_core.h" -#include "musbhsdma.h" + +#define MUSB_HSDMA_BASE 0x200 +#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) +#define MUSB_HSDMA_CONTROL 0x4 +#define MUSB_HSDMA_ADDRESS 0x8 +#define MUSB_HSDMA_COUNT 0xc + +#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ + (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset) + +#define musb_read_hsdma_addr(mbase, bchannel) \ + musb_readl(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS)) + +#define musb_write_hsdma_addr(mbase, bchannel, addr) \ + musb_writel(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \ + addr) + +#define musb_read_hsdma_count(mbase, bchannel) \ + musb_readl(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT)) + +#define musb_write_hsdma_count(mbase, bchannel, len) \ + musb_writel(mbase, \ + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ + len) +/* control register (16-bit): */ +#define MUSB_HSDMA_ENABLE_SHIFT 0 +#define MUSB_HSDMA_TRANSMIT_SHIFT 1 +#define MUSB_HSDMA_MODE1_SHIFT 2 +#define MUSB_HSDMA_IRQENABLE_SHIFT 3 +#define MUSB_HSDMA_ENDPOINT_SHIFT 4 +#define MUSB_HSDMA_BUSERROR_SHIFT 8 +#define MUSB_HSDMA_BURSTMODE_SHIFT 9 +#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT) +#define MUSB_HSDMA_BURSTMODE_UNSPEC 0 +#define MUSB_HSDMA_BURSTMODE_INCR4 1 +#define MUSB_HSDMA_BURSTMODE_INCR8 2 +#define MUSB_HSDMA_BURSTMODE_INCR16 3 + +#define MUSB_HSDMA_CHANNELS 8 + +struct musb_dma_controller; + +struct musb_dma_channel { + struct dma_channel channel; + struct musb_dma_controller *controller; + u32 start_addr; + u32 len; + u16 max_packet_sz; + u8 idx; + u8 epnum; + u8 transmit; +}; + +struct musb_dma_controller { + struct dma_controller controller; + struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS]; + void *private_data; + void __iomem *base; + u8 channel_count; + u8 used_channels; + int irq; +}; static void dma_channel_release(struct dma_channel *channel); @@ -135,14 +199,6 @@ static int dma_channel_program(struct dma_channel *channel, BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); - /* Let targets check/tweak the arguments */ - if (musb->ops->adjust_channel_params) { - int ret = musb->ops->adjust_channel_params(channel, - packet_sz, &mode, &dma_addr, &len); - if (ret) - return ret; - } - /* * The DMA engine in RTL1.8 and above cannot handle * DMA addresses that are not aligned to a 4 byte boundary. diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h deleted file mode 100644 index 93665135aff1..000000000000 --- a/drivers/usb/musb/musbhsdma.h +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * MUSB OTG driver - support for Mentor's DMA controller - * - * Copyright 2005 Mentor Graphics Corporation - * Copyright (C) 2005-2007 by Texas Instruments - */ - -#define MUSB_HSDMA_BASE 0x200 -#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) -#define MUSB_HSDMA_CONTROL 0x4 -#define MUSB_HSDMA_ADDRESS 0x8 -#define MUSB_HSDMA_COUNT 0xc - -#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ - (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset) - -#define musb_read_hsdma_addr(mbase, bchannel) \ - musb_readl(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS)) - -#define musb_write_hsdma_addr(mbase, bchannel, addr) \ - musb_writel(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \ - addr) - -#define musb_read_hsdma_count(mbase, bchannel) \ - musb_readl(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT)) - -#define musb_write_hsdma_count(mbase, bchannel, len) \ - musb_writel(mbase, \ - MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \ - len) -/* control register (16-bit): */ -#define MUSB_HSDMA_ENABLE_SHIFT 0 -#define MUSB_HSDMA_TRANSMIT_SHIFT 1 -#define MUSB_HSDMA_MODE1_SHIFT 2 -#define MUSB_HSDMA_IRQENABLE_SHIFT 3 -#define MUSB_HSDMA_ENDPOINT_SHIFT 4 -#define MUSB_HSDMA_BUSERROR_SHIFT 8 -#define MUSB_HSDMA_BURSTMODE_SHIFT 9 -#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT) -#define MUSB_HSDMA_BURSTMODE_UNSPEC 0 -#define MUSB_HSDMA_BURSTMODE_INCR4 1 -#define MUSB_HSDMA_BURSTMODE_INCR8 2 -#define MUSB_HSDMA_BURSTMODE_INCR16 3 - -#define MUSB_HSDMA_CHANNELS 8 - -struct musb_dma_controller; - -struct musb_dma_channel { - struct dma_channel channel; - struct musb_dma_controller *controller; - u32 start_addr; - u32 len; - u16 max_packet_sz; - u8 idx; - u8 epnum; - u8 transmit; -}; - -struct musb_dma_controller { - struct dma_controller controller; - struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS]; - void *private_data; - void __iomem *base; - u8 channel_count; - u8 used_channels; - int irq; -}; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 5d705930ef47..b1dd81fb5f55 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -77,7 +77,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) otg_set_vbus(otg, 1); } else { musb->is_active = 1; - otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; MUSB_HST_MODE(musb); @@ -89,7 +88,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) * jumping right to B_IDLE... */ - otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; devctl &= ~MUSB_DEVCTL_SESSION; @@ -148,14 +146,12 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) struct musb_hdrc_platform_data *pdata = dev_get_platdata(musb->controller); struct omap_musb_board_data *data = pdata->board_data; - struct usb_otg *otg = musb->xceiv->otg; pm_runtime_get_sync(musb->controller); switch (glue->status) { case MUSB_ID_GROUND: dev_dbg(musb->controller, "ID GND\n"); - otg->default_a = true; musb->xceiv->otg->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; if (musb->gadget_driver) { @@ -168,7 +164,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) case MUSB_VBUS_VALID: dev_dbg(musb->controller, "VBUS Connect\n"); - otg->default_a = false; musb->xceiv->otg->state = OTG_STATE_B_IDLE; musb->xceiv->last_event = USB_EVENT_VBUS; omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); @@ -239,21 +234,15 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - if (dev->parent->of_node) { - musb->phy = devm_phy_get(dev->parent, "usb2-phy"); - - /* We can't totally remove musb->xceiv as of now because - * musb core uses xceiv.state and xceiv.otg. Once we have - * a separate state machine to handle otg, these can be moved - * out of xceiv and then we can start using the generic PHY - * framework - */ - musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, - "usb-phy", 0); - } else { - musb->xceiv = devm_usb_get_phy_dev(dev, 0); - musb->phy = devm_phy_get(dev, "usb"); - } + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + + /* We can't totally remove musb->xceiv as of now because + * musb core uses xceiv.state and xceiv.otg. Once we have + * a separate state machine to handle otg, these can be moved + * out of xceiv and then we can start using the generic PHY + * framework + */ + musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); if (IS_ERR(musb->xceiv)) { status = PTR_ERR(musb->xceiv); @@ -391,8 +380,13 @@ static int omap2430_probe(struct platform_device *pdev) struct omap2430_glue *glue; struct device_node *np = pdev->dev.of_node; struct musb_hdrc_config *config; + struct device_node *control_node; + struct platform_device *control_pdev; int ret = -ENOMEM, val; + if (!np) + return -ENODEV; + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) goto err0; @@ -412,47 +406,43 @@ static int omap2430_probe(struct platform_device *pdev) glue->status = MUSB_UNKNOWN; glue->control_otghs = ERR_PTR(-ENODEV); - if (np) { - struct device_node *control_node; - struct platform_device *control_pdev; + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + goto err2; - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - goto err2; + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + goto err2; - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); - if (!data) - goto err2; + config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); + if (!config) + goto err2; - config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); - if (!config) + of_property_read_u32(np, "mode", (u32 *)&pdata->mode); + of_property_read_u32(np, "interface-type", + (u32 *)&data->interface_type); + of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "power", (u32 *)&pdata->power); + + ret = of_property_read_u32(np, "multipoint", &val); + if (!ret && val) + config->multipoint = true; + + pdata->board_data = data; + pdata->config = config; + + control_node = of_parse_phandle(np, "ctrl-module", 0); + if (control_node) { + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + ret = -EINVAL; goto err2; - - of_property_read_u32(np, "mode", (u32 *)&pdata->mode); - of_property_read_u32(np, "interface-type", - (u32 *)&data->interface_type); - of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); - of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); - of_property_read_u32(np, "power", (u32 *)&pdata->power); - - ret = of_property_read_u32(np, "multipoint", &val); - if (!ret && val) - config->multipoint = true; - - pdata->board_data = data; - pdata->config = config; - - control_node = of_parse_phandle(np, "ctrl-module", 0); - if (control_node) { - control_pdev = of_find_device_by_node(control_node); - if (!control_pdev) { - dev_err(&pdev->dev, "Failed to get control device\n"); - ret = -EINVAL; - goto err2; - } - glue->control_otghs = &control_pdev->dev; } + glue->control_otghs = &control_pdev->dev; } + pdata->platform_ops = &omap2430_ops; platform_set_drvdata(pdev, glue); diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index 2d201219ecff..832a41f9ee7d 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -105,13 +105,11 @@ static void sunxi_musb_work(struct work_struct *work) devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; MUSB_HST_MODE(musb); devctl |= MUSB_DEVCTL_SESSION; } else { clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - musb->xceiv->otg->default_a = 0; musb->xceiv->otg->state = OTG_STATE_B_IDLE; MUSB_DEV_MODE(musb); devctl &= ~MUSB_DEVCTL_SESSION; @@ -347,7 +345,7 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode) if (glue->phy_mode == new_mode) return 0; - if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) { + if (musb->port_mode != MUSB_OTG) { dev_err(musb->controller->parent, "Error changing modes is only supported in dual role mode\n"); return -EINVAL; @@ -651,10 +649,8 @@ static const struct musb_hdrc_config sunxi_musb_hdrc_config = { .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), .multipoint = true, .dyn_fifo = true, - .soft_con = true, .num_eps = SUNXI_MUSB_MAX_EP_NUM, .ram_bits = SUNXI_MUSB_RAM_BITS, - .dma = 0, }; static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { @@ -662,10 +658,8 @@ static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3), .multipoint = true, .dyn_fifo = true, - .soft_con = true, .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3, .ram_bits = SUNXI_MUSB_RAM_BITS, - .dma = 0, }; @@ -690,19 +684,19 @@ static int sunxi_musb_probe(struct platform_device *pdev) switch (usb_get_dr_mode(&pdev->dev)) { #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST case USB_DR_MODE_HOST: - pdata.mode = MUSB_PORT_MODE_HOST; + pdata.mode = MUSB_HOST; glue->phy_mode = PHY_MODE_USB_HOST; break; #endif #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET case USB_DR_MODE_PERIPHERAL: - pdata.mode = MUSB_PORT_MODE_GADGET; + pdata.mode = MUSB_PERIPHERAL; glue->phy_mode = PHY_MODE_USB_DEVICE; break; #endif #ifdef CONFIG_USB_MUSB_DUAL_ROLE case USB_DR_MODE_OTG: - pdata.mode = MUSB_PORT_MODE_DUAL_ROLE; + pdata.mode = MUSB_OTG; glue->phy_mode = PHY_MODE_USB_OTG; break; #endif diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 27b4a77a9e23..73538d1d0524 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -62,7 +62,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) } else { musb->is_active = 1; - musb->xceiv->otg->default_a = 1; musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; devctl |= MUSB_DEVCTL_SESSION; MUSB_HST_MODE(musb); @@ -73,7 +72,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on) /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping * right to B_IDLE... */ - musb->xceiv->otg->default_a = 0; devctl &= ~MUSB_DEVCTL_SESSION; MUSB_DEV_MODE(musb); } diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 0f8ab981d572..d7312eed6088 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -159,6 +159,16 @@ config USB_MXS_PHY MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. +config USB_TEGRA_PHY + tristate "NVIDIA Tegra USB PHY Driver" + depends on ARCH_TEGRA + select USB_COMMON + select USB_PHY + select USB_ULPI + help + This driver provides PHY support for the USB controllers found + on NVIDIA Tegra SoC's. + config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM || ARM64 diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 25e579fb92b8..df1d99010079 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o -obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o +obj-$(CONFIG_USB_TEGRA_PHY) += phy-tegra-usb.o obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index b36fa8b953d0..27bdb7222527 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -96,8 +96,7 @@ static int am335x_phy_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int am335x_phy_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct am335x_phy *am_phy = platform_get_drvdata(pdev); + struct am335x_phy *am_phy = dev_get_drvdata(dev); /* * Enable phy wakeup only if dev->power.can_wakeup is true. @@ -117,8 +116,7 @@ static int am335x_phy_suspend(struct device *dev) static int am335x_phy_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct am335x_phy *am_phy = platform_get_drvdata(pdev); + struct am335x_phy *am_phy = dev_get_drvdata(dev); phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true); diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 0e8d23e51732..ea7ef1dc0b42 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -236,13 +236,83 @@ static void set_phcd(struct tegra_usb_phy *phy, bool enable) static int utmip_pad_open(struct tegra_usb_phy *phy) { + int ret; + phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads"); if (IS_ERR(phy->pad_clk)) { - pr_err("%s: can't get utmip pad clock\n", __func__); - return PTR_ERR(phy->pad_clk); + ret = PTR_ERR(phy->pad_clk); + dev_err(phy->u_phy.dev, + "Failed to get UTMIP pad clock: %d\n", ret); + return ret; } - return 0; + phy->pad_rst = devm_reset_control_get_optional_shared( + phy->u_phy.dev, "utmi-pads"); + if (IS_ERR(phy->pad_rst)) { + ret = PTR_ERR(phy->pad_rst); + dev_err(phy->u_phy.dev, + "Failed to get UTMI-pads reset: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(phy->pad_clk); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to enable UTMI-pads clock: %d\n", ret); + return ret; + } + + spin_lock(&utmip_pad_lock); + + ret = reset_control_deassert(phy->pad_rst); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to initialize UTMI-pads reset: %d\n", ret); + goto unlock; + } + + ret = reset_control_assert(phy->pad_rst); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to assert UTMI-pads reset: %d\n", ret); + goto unlock; + } + + udelay(1); + + ret = reset_control_deassert(phy->pad_rst); + if (ret) + dev_err(phy->u_phy.dev, + "Failed to deassert UTMI-pads reset: %d\n", ret); +unlock: + spin_unlock(&utmip_pad_lock); + + clk_disable_unprepare(phy->pad_clk); + + return ret; +} + +static int utmip_pad_close(struct tegra_usb_phy *phy) +{ + int ret; + + ret = clk_prepare_enable(phy->pad_clk); + if (ret) { + dev_err(phy->u_phy.dev, + "Failed to enable UTMI-pads clock: %d\n", ret); + return ret; + } + + ret = reset_control_assert(phy->pad_rst); + if (ret) + dev_err(phy->u_phy.dev, + "Failed to assert UTMI-pads reset: %d\n", ret); + + udelay(1); + + clk_disable_unprepare(phy->pad_clk); + + return ret; } static void utmip_pad_power_on(struct tegra_usb_phy *phy) @@ -282,7 +352,7 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy) void __iomem *base = phy->pad_regs; if (!utmip_pad_count) { - pr_err("%s: utmip pad already powered off\n", __func__); + dev_err(phy->u_phy.dev, "UTMIP pad already powered off\n"); return -EINVAL; } @@ -338,7 +408,8 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) set_phcd(phy, true); if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) - pr_err("%s: timeout waiting for phy to stabilize\n", __func__); + dev_err(phy->u_phy.dev, + "Timeout waiting for PHY to stabilize on disable\n"); } static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) @@ -370,7 +441,8 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, USB_PHY_CLK_VALID)) - pr_err("%s: timeout waiting for phy to stabilize\n", __func__); + dev_err(phy->u_phy.dev, + "Timeout waiting for PHY to stabilize on enable\n"); } static int utmi_phy_power_on(struct tegra_usb_phy *phy) @@ -617,15 +689,15 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) ret = gpio_direction_output(phy->reset_gpio, 0); if (ret < 0) { - dev_err(phy->u_phy.dev, "gpio %d not set to 0\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, "GPIO %d not set to 0: %d\n", + phy->reset_gpio, ret); return ret; } msleep(5); ret = gpio_direction_output(phy->reset_gpio, 1); if (ret < 0) { - dev_err(phy->u_phy.dev, "gpio %d not set to 1\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, "GPIO %d not set to 1: %d\n", + phy->reset_gpio, ret); return ret; } @@ -661,13 +733,13 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) /* Fix VbusInvalid due to floating VBUS */ ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); if (ret) { - pr_err("%s: ulpi write failed\n", __func__); + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); return ret; } ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); if (ret) { - pr_err("%s: ulpi write failed\n", __func__); + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); return ret; } @@ -694,6 +766,9 @@ static void tegra_usb_phy_close(struct tegra_usb_phy *phy) if (!IS_ERR(phy->vbus)) regulator_disable(phy->vbus); + if (!phy->is_ulpi_phy) + utmip_pad_close(phy); + clk_disable_unprepare(phy->pll_u); } @@ -728,28 +803,30 @@ static int ulpi_open(struct tegra_usb_phy *phy) phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link"); if (IS_ERR(phy->clk)) { - pr_err("%s: can't get ulpi clock\n", __func__); - return PTR_ERR(phy->clk); + err = PTR_ERR(phy->clk); + dev_err(phy->u_phy.dev, "Failed to get ULPI clock: %d\n", err); + return err; } err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio, "ulpi_phy_reset_b"); if (err < 0) { - dev_err(phy->u_phy.dev, "request failed for gpio: %d\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, "Request failed for GPIO %d: %d\n", + phy->reset_gpio, err); return err; } err = gpio_direction_output(phy->reset_gpio, 0); if (err < 0) { - dev_err(phy->u_phy.dev, "gpio %d direction not set to output\n", - phy->reset_gpio); + dev_err(phy->u_phy.dev, + "GPIO %d direction not set to output: %d\n", + phy->reset_gpio, err); return err; } phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); if (!phy->ulpi) { - dev_err(phy->u_phy.dev, "otg_ulpi_create returned NULL\n"); + dev_err(phy->u_phy.dev, "Failed to create ULPI OTG\n"); err = -ENOMEM; return err; } @@ -766,8 +843,10 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u"); if (IS_ERR(phy->pll_u)) { - pr_err("Can't get pll_u clock\n"); - return PTR_ERR(phy->pll_u); + err = PTR_ERR(phy->pll_u); + dev_err(phy->u_phy.dev, + "Failed to get pll_u clock: %d\n", err); + return err; } err = clk_prepare_enable(phy->pll_u); @@ -782,7 +861,8 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) } } if (!phy->freq) { - pr_err("invalid pll_u parent rate %ld\n", parent_rate); + dev_err(phy->u_phy.dev, "Invalid pll_u parent rate %ld\n", + parent_rate); err = -EINVAL; goto fail; } @@ -791,7 +871,7 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) err = regulator_enable(phy->vbus); if (err) { dev_err(phy->u_phy.dev, - "failed to enable usb vbus regulator: %d\n", + "Failed to enable USB VBUS regulator: %d\n", err); goto fail; } @@ -855,7 +935,8 @@ static int read_utmi_param(struct platform_device *pdev, const char *param, int err = of_property_read_u32(pdev->dev.of_node, param, &value); *dest = (u8)value; if (err < 0) - dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n", + dev_err(&pdev->dev, + "Failed to read USB UTMI parameter %s: %d\n", param, err); return err; } @@ -871,14 +952,14 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { - dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n"); + dev_err(&pdev->dev, "Failed to get UTMI pad regs\n"); return -ENXIO; } tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!tegra_phy->pad_regs) { - dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n"); + dev_err(&pdev->dev, "Failed to remap UTMI pad regs\n"); return -ENOMEM; } @@ -1020,15 +1101,16 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) tegra_phy->reset_gpio = of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); if (!gpio_is_valid(tegra_phy->reset_gpio)) { - dev_err(&pdev->dev, "invalid gpio: %d\n", - tegra_phy->reset_gpio); + dev_err(&pdev->dev, + "Invalid GPIO: %d\n", tegra_phy->reset_gpio); return tegra_phy->reset_gpio; } tegra_phy->config = NULL; break; default: - dev_err(&pdev->dev, "phy_type is invalid or unsupported\n"); + dev_err(&pdev->dev, "phy_type %u is invalid or unsupported\n", + phy_type); return -EINVAL; } diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index bceb2c9988dd..0277f62739a2 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -27,7 +27,6 @@ #define DEFAULT_ACA_CUR_MAX 5000 static LIST_HEAD(phy_list); -static LIST_HEAD(phy_bind_list); static DEFINE_SPINLOCK(phy_lock); struct phy_devm { @@ -50,24 +49,6 @@ static struct usb_phy *__usb_find_phy(struct list_head *list, return ERR_PTR(-ENODEV); } -static struct usb_phy *__usb_find_phy_dev(struct device *dev, - struct list_head *list, u8 index) -{ - struct usb_phy_bind *phy_bind = NULL; - - list_for_each_entry(phy_bind, list, list) { - if (!(strcmp(phy_bind->dev_name, dev_name(dev))) && - phy_bind->index == index) { - if (phy_bind->phy) - return phy_bind->phy; - else - return ERR_PTR(-EPROBE_DEFER); - } - } - - return ERR_PTR(-ENODEV); -} - static struct usb_phy *__of_usb_find_phy(struct device_node *node) { struct usb_phy *phy; @@ -585,72 +566,6 @@ struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle); /** - * usb_get_phy_dev - find the USB PHY - * @dev - device that requests this phy - * @index - the index of the phy - * - * Returns the phy driver, after getting a refcount to it; or - * -ENODEV if there is no such phy. The caller is responsible for - * calling usb_put_phy() to release that count. - * - * For use by USB host and peripheral drivers. - */ -struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) -{ - struct usb_phy *phy = NULL; - unsigned long flags; - - spin_lock_irqsave(&phy_lock, flags); - - phy = __usb_find_phy_dev(dev, &phy_bind_list, index); - if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { - dev_dbg(dev, "unable to find transceiver\n"); - if (!IS_ERR(phy)) - phy = ERR_PTR(-ENODEV); - - goto err0; - } - - get_device(phy->dev); - -err0: - spin_unlock_irqrestore(&phy_lock, flags); - - return phy; -} -EXPORT_SYMBOL_GPL(usb_get_phy_dev); - -/** - * devm_usb_get_phy_dev - find the USB PHY using device ptr and index - * @dev - device that requests this phy - * @index - the index of the phy - * - * Gets the phy using usb_get_phy_dev(), and associates a device with it using - * devres. On driver detach, release function is invoked on the devres data, - * then, devres data is freed. - * - * For use by USB host and peripheral drivers. - */ -struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) -{ - struct usb_phy **ptr, *phy; - - ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return NULL; - - phy = usb_get_phy_dev(dev, index); - if (!IS_ERR(phy)) { - *ptr = phy; - devres_add(dev, ptr); - } else - devres_free(ptr); - - return phy; -} -EXPORT_SYMBOL_GPL(devm_usb_get_phy_dev); - -/** * devm_usb_put_phy - release the USB PHY * @dev - device that wants to release this phy * @phy - the phy returned by devm_usb_get_phy() @@ -745,7 +660,6 @@ EXPORT_SYMBOL_GPL(usb_add_phy); */ int usb_add_phy_dev(struct usb_phy *x) { - struct usb_phy_bind *phy_bind; unsigned long flags; int ret; @@ -762,13 +676,9 @@ int usb_add_phy_dev(struct usb_phy *x) ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier); spin_lock_irqsave(&phy_lock, flags); - list_for_each_entry(phy_bind, &phy_bind_list, list) - if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev)))) - phy_bind->phy = x; - list_add_tail(&x->head, &phy_list); - spin_unlock_irqrestore(&phy_lock, flags); + return 0; } EXPORT_SYMBOL_GPL(usb_add_phy_dev); @@ -782,54 +692,15 @@ EXPORT_SYMBOL_GPL(usb_add_phy_dev); void usb_remove_phy(struct usb_phy *x) { unsigned long flags; - struct usb_phy_bind *phy_bind; spin_lock_irqsave(&phy_lock, flags); - if (x) { - list_for_each_entry(phy_bind, &phy_bind_list, list) - if (phy_bind->phy == x) - phy_bind->phy = NULL; + if (x) list_del(&x->head); - } spin_unlock_irqrestore(&phy_lock, flags); } EXPORT_SYMBOL_GPL(usb_remove_phy); /** - * usb_bind_phy - bind the phy and the controller that uses the phy - * @dev_name: the device name of the device that will bind to the phy - * @index: index to specify the port number - * @phy_dev_name: the device name of the phy - * - * Fills the phy_bind structure with the dev_name and phy_dev_name. This will - * be used when the phy driver registers the phy and when the controller - * requests this phy. - * - * To be used by platform specific initialization code. - */ -int usb_bind_phy(const char *dev_name, u8 index, - const char *phy_dev_name) -{ - struct usb_phy_bind *phy_bind; - unsigned long flags; - - phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL); - if (!phy_bind) - return -ENOMEM; - - phy_bind->dev_name = dev_name; - phy_bind->phy_dev_name = phy_dev_name; - phy_bind->index = index; - - spin_lock_irqsave(&phy_lock, flags); - list_add_tail(&phy_bind->list, &phy_bind_list); - spin_unlock_irqrestore(&phy_lock, flags); - - return 0; -} -EXPORT_SYMBOL_GPL(usb_bind_phy); - -/** * usb_phy_set_event - set event to phy event * @x: the phy returned by usb_get_phy(); * diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index f619afeae2b8..6137f7942c05 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -276,7 +276,6 @@ struct usbhs_priv { */ struct usbhs_fifo_info fifo_info; - struct usb_phy *usb_phy; struct phy *phy; }; diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c index 85a0e0933917..0027092b1118 100644 --- a/drivers/usb/renesas_usbhs/rcar2.c +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -8,7 +8,6 @@ #include <linux/gpio.h> #include <linux/of_gpio.h> #include <linux/phy/phy.h> -#include <linux/usb/phy.h> #include "common.h" #include "rcar2.h" @@ -26,16 +25,6 @@ static int usbhs_rcar2_hardware_init(struct platform_device *pdev) return 0; } - if (IS_ENABLED(CONFIG_USB_PHY)) { - struct usb_phy *usb_phy = usb_get_phy_dev(&pdev->dev, 0); - - if (IS_ERR(usb_phy)) - return PTR_ERR(usb_phy); - - priv->usb_phy = usb_phy; - return 0; - } - return -ENXIO; } @@ -48,11 +37,6 @@ static int usbhs_rcar2_hardware_exit(struct platform_device *pdev) priv->phy = NULL; } - if (priv->usb_phy) { - usb_put_phy(priv->usb_phy); - priv->usb_phy = NULL; - } - return 0; } @@ -75,19 +59,6 @@ static int usbhs_rcar2_power_ctrl(struct platform_device *pdev, } } - if (priv->usb_phy) { - if (enable) { - retval = usb_phy_init(priv->usb_phy); - - if (!retval) - retval = usb_phy_set_suspend(priv->usb_phy, 0); - } else { - usb_phy_set_suspend(priv->usb_phy, 1); - usb_phy_shutdown(priv->usb_phy); - retval = 0; - } - } - return retval; } diff --git a/drivers/usb/roles/intel-xhci-usb-role-switch.c b/drivers/usb/roles/intel-xhci-usb-role-switch.c index de72eedb762e..1fb3dd0f1dfa 100644 --- a/drivers/usb/roles/intel-xhci-usb-role-switch.c +++ b/drivers/usb/roles/intel-xhci-usb-role-switch.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/usb/role.h> /* register definition */ @@ -38,20 +39,6 @@ struct intel_xhci_usb_data { void __iomem *base; }; -struct intel_xhci_acpi_match { - const char *hid; - int hrv; -}; - -/* - * ACPI IDs for PMICs which do not support separate data and power role - * detection (USB ACA detection for micro USB OTG), we allow userspace to - * change the role manually on these. - */ -static const struct intel_xhci_acpi_match allow_userspace_ctrl_ids[] = { - { "INT33F4", 3 }, /* X-Powers AXP288 PMIC */ -}; - static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) { struct intel_xhci_usb_data *data = dev_get_drvdata(dev); @@ -70,6 +57,8 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) return -EIO; } + pm_runtime_get_sync(dev); + /* Set idpin value as requested */ val = readl(data->base + DUAL_ROLE_CFG0); switch (role) { @@ -98,13 +87,17 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) /* Polling on CFG1 register to confirm mode switch.*/ do { val = readl(data->base + DUAL_ROLE_CFG1); - if (!!(val & HOST_MODE) == (role == USB_ROLE_HOST)) + if (!!(val & HOST_MODE) == (role == USB_ROLE_HOST)) { + pm_runtime_put(dev); return 0; + } /* Interval for polling is set to about 5 - 10 ms */ usleep_range(5000, 10000); } while (time_before(jiffies, timeout)); + pm_runtime_put(dev); + dev_warn(dev, "Timeout waiting for role-switch\n"); return -ETIMEDOUT; } @@ -115,7 +108,9 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev) enum usb_role role; u32 val; + pm_runtime_get_sync(dev); val = readl(data->base + DUAL_ROLE_CFG0); + pm_runtime_put(dev); if (!(val & SW_IDPIN)) role = USB_ROLE_HOST; @@ -127,9 +122,10 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev) return role; } -static struct usb_role_switch_desc sw_desc = { +static const struct usb_role_switch_desc sw_desc = { .set = intel_xhci_usb_set_role, .get = intel_xhci_usb_get_role, + .allow_userspace_control = true, }; static int intel_xhci_usb_probe(struct platform_device *pdev) @@ -137,28 +133,27 @@ static int intel_xhci_usb_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct intel_xhci_usb_data *data; struct resource *res; - int i; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; data->base = devm_ioremap_nocache(dev, res->start, resource_size(res)); if (!data->base) return -ENOMEM; - for (i = 0; i < ARRAY_SIZE(allow_userspace_ctrl_ids); i++) - if (acpi_dev_present(allow_userspace_ctrl_ids[i].hid, "1", - allow_userspace_ctrl_ids[i].hrv)) - sw_desc.allow_userspace_control = true; - platform_set_drvdata(pdev, data); data->role_sw = usb_role_switch_register(dev, &sw_desc); if (IS_ERR(data->role_sw)) return PTR_ERR(data->role_sw); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; } diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 9e265eb92611..eb0195cf37dd 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -60,7 +60,8 @@ static int usb_serial_device_probe(struct device *dev) } minor = port->minor; - tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev); + tty_dev = tty_port_register_device(&port->port, usb_serial_tty_driver, + minor, dev); if (IS_ERR(tty_dev)) { retval = PTR_ERR(tty_dev); goto err_port_remove; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7ea221d42dba..b5cef322826f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -54,15 +54,14 @@ struct ftdi_private { int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */ - __u16 last_set_data_urb_value ; - /* the last data state set - needed for doing - * a break - */ + u16 last_set_data_value; /* the last data state set - needed for doing + * a break + */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ - __u16 interface; /* FT2232C, FT2232H or FT4232H port interface + u16 interface; /* FT2232C, FT2232H or FT4232H port interface (0 for FT232/245) */ speed_t force_baud; /* if non-zero, force the baud rate to @@ -1063,10 +1062,10 @@ static int ftdi_get_modem_status(struct usb_serial_port *port, static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); static unsigned short int ftdi_232am_baud_to_divisor(int baud); -static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); -static __u32 ftdi_232bm_baud_to_divisor(int baud); -static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); -static __u32 ftdi_2232h_baud_to_divisor(int baud); +static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); +static u32 ftdi_232bm_baud_to_divisor(int baud); +static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); +static u32 ftdi_2232h_baud_to_divisor(int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { @@ -1136,14 +1135,14 @@ static unsigned short int ftdi_232am_baud_to_divisor(int baud) return ftdi_232am_baud_base_to_divisor(baud, 48000000); } -static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) +static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) { static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; - __u32 divisor; + u32 divisor; /* divisor shifted 3 bits to the left */ int divisor3 = base / 2 / baud; divisor = divisor3 >> 3; - divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ if (divisor == 1) divisor = 0; @@ -1152,22 +1151,22 @@ static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) return divisor; } -static __u32 ftdi_232bm_baud_to_divisor(int baud) +static u32 ftdi_232bm_baud_to_divisor(int baud) { return ftdi_232bm_baud_base_to_divisor(baud, 48000000); } -static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) +static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) { static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; - __u32 divisor; + u32 divisor; int divisor3; /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ divisor3 = base * 8 / (baud * 10); divisor = divisor3 >> 3; - divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ if (divisor == 1) divisor = 0; @@ -1182,7 +1181,7 @@ static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) return divisor; } -static __u32 ftdi_2232h_baud_to_divisor(int baud) +static u32 ftdi_2232h_baud_to_divisor(int baud) { return ftdi_2232h_baud_base_to_divisor(baud, 120000000); } @@ -1195,7 +1194,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, { struct ftdi_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; - unsigned urb_value; + unsigned value; int rv; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { @@ -1204,20 +1203,20 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, } clear &= ~set; /* 'set' takes precedence over 'clear' */ - urb_value = 0; + value = 0; if (clear & TIOCM_DTR) - urb_value |= FTDI_SIO_SET_DTR_LOW; + value |= FTDI_SIO_SET_DTR_LOW; if (clear & TIOCM_RTS) - urb_value |= FTDI_SIO_SET_RTS_LOW; + value |= FTDI_SIO_SET_RTS_LOW; if (set & TIOCM_DTR) - urb_value |= FTDI_SIO_SET_DTR_HIGH; + value |= FTDI_SIO_SET_DTR_HIGH; if (set & TIOCM_RTS) - urb_value |= FTDI_SIO_SET_RTS_HIGH; + value |= FTDI_SIO_SET_RTS_HIGH; rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, - urb_value, priv->interface, + value, priv->interface, NULL, 0, WDR_TIMEOUT); if (rv < 0) { dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", @@ -1236,12 +1235,12 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, } -static __u32 get_ftdi_divisor(struct tty_struct *tty, +static u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; - __u32 div_value = 0; + u32 div_value = 0; int div_okay = 1; int baud; @@ -1299,7 +1298,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, case FT232RL: /* FT232RL chip */ case FTX: /* FT-X series */ if (baud <= 3000000) { - __u16 product_id = le16_to_cpu( + u16 product_id = le16_to_cpu( port->serial->dev->descriptor.idProduct); if (((product_id == FTDI_NDI_HUC_PID) || (product_id == FTDI_NDI_SPECTRA_SCU_PID) || @@ -1346,26 +1345,26 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value; - __u16 urb_index; - __u32 urb_index_value; + u16 value; + u16 index; + u32 index_value; int rv; - urb_index_value = get_ftdi_divisor(tty, port); - urb_value = (__u16)urb_index_value; - urb_index = (__u16)(urb_index_value >> 16); + index_value = get_ftdi_divisor(tty, port); + value = (u16)index_value; + index = (u16)(index_value >> 16); if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) || (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) { /* Probably the BM type needs the MSB of the encoded fractional * divider also moved like for the chips above. Any infos? */ - urb_index = (__u16)((urb_index << 8) | priv->interface); + index = (u16)((index << 8) | priv->interface); } rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_BAUDRATE_REQUEST, FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, - urb_value, urb_index, + value, index, NULL, 0, WDR_SHORT_TIMEOUT); return rv; } @@ -2140,29 +2139,29 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); - __u16 urb_value; + u16 value; /* break_state = -1 to turn on break, and 0 to turn off break */ /* see drivers/char/tty_io.c to see it used */ - /* last_set_data_urb_value NEVER has the break bit set in it */ + /* last_set_data_value NEVER has the break bit set in it */ if (break_state) - urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; + value = priv->last_set_data_value | FTDI_SIO_SET_BREAK; else - urb_value = priv->last_set_data_urb_value; + value = priv->last_set_data_value; if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - urb_value , priv->interface, + value , priv->interface, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", __func__, break_state); } dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__, - break_state, urb_value); + break_state, value); } @@ -2192,12 +2191,8 @@ static void ftdi_set_termios(struct tty_struct *tty, struct ftdi_private *priv = usb_get_serial_port_data(port); struct ktermios *termios = &tty->termios; unsigned int cflag = termios->c_cflag; - __u16 urb_value; /* will hold the new flags */ - - /* Added for xon/xoff support */ - unsigned int iflag = termios->c_iflag; - unsigned char vstop; - unsigned char vstart; + u16 value, index; + int ret; /* Force baud rate if this device requires it, unless it is set to B0. */ @@ -2258,44 +2253,44 @@ static void ftdi_set_termios(struct tty_struct *tty, no_skip: /* Set number of data bits, parity, stop bits */ - urb_value = 0; - urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : - FTDI_SIO_SET_DATA_STOP_BITS_1); + value = 0; + value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : + FTDI_SIO_SET_DATA_STOP_BITS_1); if (cflag & PARENB) { if (cflag & CMSPAR) - urb_value |= cflag & PARODD ? - FTDI_SIO_SET_DATA_PARITY_MARK : - FTDI_SIO_SET_DATA_PARITY_SPACE; + value |= cflag & PARODD ? + FTDI_SIO_SET_DATA_PARITY_MARK : + FTDI_SIO_SET_DATA_PARITY_SPACE; else - urb_value |= cflag & PARODD ? - FTDI_SIO_SET_DATA_PARITY_ODD : - FTDI_SIO_SET_DATA_PARITY_EVEN; + value |= cflag & PARODD ? + FTDI_SIO_SET_DATA_PARITY_ODD : + FTDI_SIO_SET_DATA_PARITY_EVEN; } else { - urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE; + value |= FTDI_SIO_SET_DATA_PARITY_NONE; } switch (cflag & CSIZE) { case CS5: dev_dbg(ddev, "Setting CS5 quirk\n"); break; case CS7: - urb_value |= 7; + value |= 7; dev_dbg(ddev, "Setting CS7\n"); break; default: case CS8: - urb_value |= 8; + value |= 8; dev_dbg(ddev, "Setting CS8\n"); break; } /* This is needed by the break command since it uses the same command - but is or'ed with this value */ - priv->last_set_data_urb_value = urb_value; + priv->last_set_data_value = value; if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - urb_value , priv->interface, + value , priv->interface, NULL, 0, WDR_SHORT_TIMEOUT) < 0) { dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", __func__); @@ -2326,65 +2321,30 @@ no_data_parity_stop_changes: set_mctrl(port, TIOCM_DTR | TIOCM_RTS); } - /* Set flow control */ - /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ no_c_cflag_changes: - if (cflag & CRTSCTS) { - dev_dbg(ddev, "%s Setting to CRTSCTS flow control\n", __func__); - if (usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), - NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(ddev, "urb failed to set to rts/cts flow control\n"); - } + /* Set hardware-assisted flow control */ + value = 0; + + if (C_CRTSCTS(tty)) { + dev_dbg(&port->dev, "enabling rts/cts flow control\n"); + index = FTDI_SIO_RTS_CTS_HS; + } else if (I_IXON(tty)) { + dev_dbg(&port->dev, "enabling xon/xoff flow control\n"); + index = FTDI_SIO_XON_XOFF_HS; + value = STOP_CHAR(tty) << 8 | START_CHAR(tty); } else { - /* - * Xon/Xoff code - * - * Check the IXOFF status in the iflag component of the - * termios structure. If IXOFF is not set, the pre-xon/xoff - * code is executed. - */ - if (iflag & IXOFF) { - dev_dbg(ddev, "%s request to enable xonxoff iflag=%04x\n", - __func__, iflag); - /* Try to enable the XON/XOFF on the ftdi_sio - * Set the vstart and vstop -- could have been done up - * above where a lot of other dereferencing is done but - * that would be very inefficient as vstart and vstop - * are not always needed. - */ - vstart = termios->c_cc[VSTART]; - vstop = termios->c_cc[VSTOP]; - urb_value = (vstop << 8) | (vstart); - - if (usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - urb_value , (FTDI_SIO_XON_XOFF_HS - | priv->interface), - NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(&port->dev, "urb failed to set to " - "xon/xoff flow control\n"); - } - } else { - /* else clause to only run if cflag ! CRTSCTS and iflag - * ! XOFF. CHECKME Assuming XON/XOFF handled by tty - * stack - not by device */ - dev_dbg(ddev, "%s Turning off hardware flow control\n", __func__); - if (usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), - FTDI_SIO_SET_FLOW_CTRL_REQUEST, - FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, - NULL, 0, WDR_TIMEOUT) < 0) { - dev_err(ddev, "urb failed to clear flow control\n"); - } - } + dev_dbg(&port->dev, "disabling flow control\n"); + index = FTDI_SIO_DISABLE_FLOW_CTRL; } + + index |= priv->interface; + + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + value, index, NULL, 0, WDR_TIMEOUT); + if (ret < 0) + dev_err(&port->dev, "failed to set flow control: %d\n", ret); } /* diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2058852a87fa..664e61f16b6a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1916,7 +1916,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) }, - { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */ + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff), /* D-Link DWM-158 */ + .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) }, /* D-Link DWM-157 C1 */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */ .driver_info = RSVD(4) }, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 46dd09da2434..5d1a1931967e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -533,6 +533,17 @@ static int pl2303_set_line_request(struct usb_serial_port *port, return 0; } +static bool pl2303_termios_change(const struct ktermios *a, const struct ktermios *b) +{ + bool ixon_change; + + ixon_change = ((a->c_iflag ^ b->c_iflag) & (IXON | IXANY)) || + a->c_cc[VSTART] != b->c_cc[VSTART] || + a->c_cc[VSTOP] != b->c_cc[VSTOP]; + + return tty_termios_hw_change(a, b) || ixon_change; +} + static void pl2303_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -544,7 +555,7 @@ static void pl2303_set_termios(struct tty_struct *tty, int ret; u8 control; - if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + if (old_termios && !pl2303_termios_change(&tty->termios, old_termios)) return; buf = kzalloc(7, GFP_KERNEL); @@ -662,6 +673,9 @@ static void pl2303_set_termios(struct tty_struct *tty, pl2303_vendor_write(serial, 0x0, 0x41); else pl2303_vendor_write(serial, 0x0, 0x61); + } else if (I_IXON(tty) && !I_IXANY(tty) && START_CHAR(tty) == 0x11 && + STOP_CHAR(tty) == 0x13) { + pl2303_vendor_write(serial, 0x0, 0xc0); } else { pl2303_vendor_write(serial, 0x0, 0x0); } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 268ffa6b51d2..f7aaa7f079e1 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -192,7 +192,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) if (retval) goto error_get_interface; - retval = tty_port_install(&port->port, driver, tty); + retval = tty_standard_install(driver, tty); if (retval) goto error_init_termios; diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index ec4d92c92762..4f542df37a44 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -464,7 +464,7 @@ static int init_freecom(struct us_data *us) usb_stor_dbg(us, "result from activate reset is %d\n", result); /* wait 250ms */ - mdelay(250); + msleep(250); /* clear reset */ result = usb_stor_control_msg(us, us->send_ctrl_pipe, @@ -472,7 +472,7 @@ static int init_freecom(struct us_data *us) usb_stor_dbg(us, "result from clear reset is %d\n", result); /* wait 3 seconds */ - mdelay(3 * 1000); + msleep(3 * 1000); return USB_STOR_TRANSPORT_GOOD; } diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 6034c39b67d1..9e9de5452860 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -836,6 +836,12 @@ static int uas_slave_configure(struct scsi_device *sdev) if (devinfo->flags & US_FL_BROKEN_FUA) sdev->broken_fua = 1; + /* UAS also needs to support FL_ALWAYS_SYNC */ + if (devinfo->flags & US_FL_ALWAYS_SYNC) { + sdev->skip_ms_page_3f = 1; + sdev->skip_ms_page_8 = 1; + sdev->wce_default_on = 1; + } scsi_change_queue_depth(sdev, devinfo->qdepth - 2); return 0; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 747d3a9596d9..22fcfccf453a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2321,6 +2321,15 @@ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Micro Mini 1GB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), +/* "G-DRIVE" external HDD hangs on write without these. + * Patch submitted by Alexander Kappner <agk@godking.net> + */ +UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999, + "SimpleTech", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_ALWAYS_SYNC), + /* * Nick Bowler <nbowler@elliptictech.com> * SCSI stack spams (otherwise harmless) error messages. diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 38434d88954a..d0bdebd87ce3 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -107,3 +107,12 @@ UNUSUAL_DEV(0x4971, 0x8017, 0x0000, 0x9999, "External HDD", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES), + +/* "G-DRIVE" external HDD hangs on write without these. + * Patch submitted by Alexander Kappner <agk@godking.net> + */ +UNUSUAL_DEV(0x4971, 0x8024, 0x0000, 0x9999, + "SimpleTech", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_ALWAYS_SYNC), diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 030f88cb0c3f..2c8eab11a493 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -49,6 +49,7 @@ config TYPEC_TCPM tristate "USB Type-C Port Controller Manager" depends on USB select USB_ROLE_SWITCH + select POWER_SUPPLY help The Type-C Port Controller Manager provides a USB PD and USB Type-C state machine for use with Type-C Port Controllers. diff --git a/drivers/usb/typec/fusb302/Kconfig b/drivers/usb/typec/fusb302/Kconfig index 48a4f2fcee03..fce099ff39fe 100644 --- a/drivers/usb/typec/fusb302/Kconfig +++ b/drivers/usb/typec/fusb302/Kconfig @@ -1,6 +1,6 @@ config TYPEC_FUSB302 tristate "Fairchild FUSB302 Type-C chip driver" - depends on I2C && POWER_SUPPLY + depends on I2C help The Fairchild FUSB302 Type-C chip driver that works with Type-C Port Controller Manager to provide USB PD and USB diff --git a/drivers/usb/typec/fusb302/fusb302.c b/drivers/usb/typec/fusb302/fusb302.c index 703617129067..1e68da10bf17 100644 --- a/drivers/usb/typec/fusb302/fusb302.c +++ b/drivers/usb/typec/fusb302/fusb302.c @@ -18,7 +18,6 @@ #include <linux/of_device.h> #include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> -#include <linux/power_supply.h> #include <linux/proc_fs.h> #include <linux/regulator/consumer.h> #include <linux/sched/clock.h> @@ -99,11 +98,6 @@ struct fusb302_chip { /* lock for sharing chip states */ struct mutex lock; - /* psy + psy status */ - struct power_supply *psy; - u32 current_limit; - u32 supply_voltage; - /* chip status */ enum toggling_mode toggling_mode; enum src_current_status src_current_status; @@ -120,6 +114,7 @@ struct fusb302_chip { enum typec_cc_polarity cc_polarity; enum typec_cc_status cc1; enum typec_cc_status cc2; + u32 snk_pdo[PDO_MAX_OBJECTS]; #ifdef CONFIG_DEBUG_FS struct dentry *dentry; @@ -220,32 +215,28 @@ DEFINE_SHOW_ATTRIBUTE(fusb302_debug); static struct dentry *rootdir; -static int fusb302_debugfs_init(struct fusb302_chip *chip) +static void fusb302_debugfs_init(struct fusb302_chip *chip) { mutex_init(&chip->logbuffer_lock); - if (!rootdir) { + if (!rootdir) rootdir = debugfs_create_dir("fusb302", NULL); - if (!rootdir) - return -ENOMEM; - } chip->dentry = debugfs_create_file(dev_name(chip->dev), S_IFREG | 0444, rootdir, chip, &fusb302_debug_fops); - - return 0; } static void fusb302_debugfs_exit(struct fusb302_chip *chip) { debugfs_remove(chip->dentry); + debugfs_remove(rootdir); } #else static void fusb302_log(const struct fusb302_chip *chip, const char *fmt, ...) { } -static int fusb302_debugfs_init(const struct fusb302_chip *chip) { return 0; } +static void fusb302_debugfs_init(const struct fusb302_chip *chip) { } static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { } #endif @@ -861,13 +852,11 @@ static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) chip->vbus_on = on; fusb302_log(chip, "vbus := %s", on ? "On" : "Off"); } - if (chip->charge_on == charge) { + if (chip->charge_on == charge) fusb302_log(chip, "charge is already %s", charge ? "On" : "Off"); - } else { + else chip->charge_on = charge; - power_supply_changed(chip->psy); - } done: mutex_unlock(&chip->lock); @@ -883,11 +872,6 @@ static int tcpm_set_current_limit(struct tcpc_dev *dev, u32 max_ma, u32 mv) fusb302_log(chip, "current limit: %d ma, %d mv (not implemented)", max_ma, mv); - chip->supply_voltage = mv; - chip->current_limit = max_ma; - - power_supply_changed(chip->psy); - return 0; } @@ -1212,11 +1196,6 @@ static const u32 snk_pdo[] = { static const struct tcpc_config fusb302_tcpc_config = { .src_pdo = src_pdo, .nr_src_pdo = ARRAY_SIZE(src_pdo), - .snk_pdo = snk_pdo, - .nr_snk_pdo = ARRAY_SIZE(snk_pdo), - .max_snk_mv = 5000, - .max_snk_ma = 3000, - .max_snk_mw = 15000, .operating_snk_mw = 2500, .type = TYPEC_PORT_DRP, .data = TYPEC_PORT_DRD, @@ -1686,43 +1665,6 @@ done: return IRQ_HANDLED; } -static int fusb302_psy_get_property(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct fusb302_chip *chip = power_supply_get_drvdata(psy); - - switch (psp) { - case POWER_SUPPLY_PROP_ONLINE: - val->intval = chip->charge_on; - break; - case POWER_SUPPLY_PROP_VOLTAGE_NOW: - val->intval = chip->supply_voltage * 1000; /* mV -> µV */ - break; - case POWER_SUPPLY_PROP_CURRENT_MAX: - val->intval = chip->current_limit * 1000; /* mA -> µA */ - break; - default: - return -ENODATA; - } - - return 0; -} - -static enum power_supply_property fusb302_psy_properties[] = { - POWER_SUPPLY_PROP_ONLINE, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_MAX, -}; - -static const struct power_supply_desc fusb302_psy_desc = { - .name = "fusb302-typec-source", - .type = POWER_SUPPLY_TYPE_USB_TYPE_C, - .properties = fusb302_psy_properties, - .num_properties = ARRAY_SIZE(fusb302_psy_properties), - .get_property = fusb302_psy_get_property, -}; - static int init_gpio(struct fusb302_chip *chip) { struct device_node *node; @@ -1756,13 +1698,35 @@ static int init_gpio(struct fusb302_chip *chip) return 0; } +static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip) +{ + struct device *dev = chip->dev; + u32 max_uv, max_ua; + + chip->snk_pdo[0] = PDO_FIXED(5000, 400, PDO_FIXED_FLAGS); + + /* + * As max_snk_ma/mv/mw is not needed for tcpc_config, + * those settings should be passed in via sink PDO, so + * "fcs, max-sink-*" properties will be deprecated, to + * perserve compatibility with existing users of them, + * we read those properties to convert them to be a var + * PDO. + */ + if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &max_uv) || + device_property_read_u32(dev, "fcs,max-sink-microamp", &max_ua)) + return 1; + + chip->snk_pdo[1] = PDO_VAR(5000, max_uv / 1000, max_ua / 1000); + return 2; +} + static int fusb302_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct fusb302_chip *chip; struct i2c_adapter *adapter; struct device *dev = &client->dev; - struct power_supply_config cfg = {}; const char *name; int ret = 0; u32 v; @@ -1784,18 +1748,13 @@ static int fusb302_probe(struct i2c_client *client, chip->tcpc_dev.config = &chip->tcpc_config; mutex_init(&chip->lock); - if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v)) - chip->tcpc_config.max_snk_mv = v / 1000; - - if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v)) - chip->tcpc_config.max_snk_ma = v / 1000; - - if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v)) - chip->tcpc_config.max_snk_mw = v / 1000; - if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) chip->tcpc_config.operating_snk_mw = v / 1000; + /* Composite sink PDO */ + chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip); + chip->tcpc_config.snk_pdo = chip->snk_pdo; + /* * Devicetree platforms should get extcon via phandle (not yet * supported). On ACPI platforms, we get the name from a device prop. @@ -1809,17 +1768,7 @@ static int fusb302_probe(struct i2c_client *client, return -EPROBE_DEFER; } - cfg.drv_data = chip; - chip->psy = devm_power_supply_register(dev, &fusb302_psy_desc, &cfg); - if (IS_ERR(chip->psy)) { - ret = PTR_ERR(chip->psy); - dev_err(chip->dev, "Error registering power-supply: %d\n", ret); - return ret; - } - - ret = fusb302_debugfs_init(chip); - if (ret < 0) - return ret; + fusb302_debugfs_init(chip); chip->wq = create_singlethread_workqueue(dev_name(chip->dev)); if (!chip->wq) { diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index f89093bd7185..9d8330e9c431 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -178,7 +178,7 @@ EXPORT_SYMBOL_GPL(typec_mux_register); /** * typec_mux_unregister - Unregister Multiplexer Switch - * @sw: USB Type-C Connector Multiplexer/DeMultiplexer + * @mux: USB Type-C Connector Multiplexer/DeMultiplexer * * Unregister mux that was registered with typec_mux_register(). */ diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index ded49e3bf2b0..8a201dd53d36 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -12,13 +12,17 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/power_supply.h> #include <linux/proc_fs.h> +#include <linux/property.h> #include <linux/sched/clock.h> #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/usb/pd.h> +#include <linux/usb/pd_ado.h> #include <linux/usb/pd_bdo.h> +#include <linux/usb/pd_ext_sdb.h> #include <linux/usb/pd_vdo.h> #include <linux/usb/role.h> #include <linux/usb/tcpm.h> @@ -48,6 +52,7 @@ S(SNK_DISCOVERY_DEBOUNCE_DONE), \ S(SNK_WAIT_CAPABILITIES), \ S(SNK_NEGOTIATE_CAPABILITIES), \ + S(SNK_NEGOTIATE_PPS_CAPABILITIES), \ S(SNK_TRANSITION_SINK), \ S(SNK_TRANSITION_SINK_VBUS), \ S(SNK_READY), \ @@ -112,6 +117,11 @@ S(SNK_TRYWAIT_VBUS), \ S(BIST_RX), \ \ + S(GET_STATUS_SEND), \ + S(GET_STATUS_SEND_TIMEOUT), \ + S(GET_PPS_STATUS_SEND), \ + S(GET_PPS_STATUS_SEND_TIMEOUT), \ + \ S(ERROR_RECOVERY), \ S(PORT_RESET), \ S(PORT_RESET_WAIT_OFF) @@ -142,6 +152,7 @@ enum pd_msg_request { PD_MSG_NONE = 0, PD_MSG_CTRL_REJECT, PD_MSG_CTRL_WAIT, + PD_MSG_CTRL_NOT_SUPP, PD_MSG_DATA_SINK_CAP, PD_MSG_DATA_SOURCE_CAP, }; @@ -167,6 +178,16 @@ struct pd_mode_data { struct typec_altmode_desc altmode_desc[SVID_DISCOVERY_MAX]; }; +struct pd_pps_data { + u32 min_volt; + u32 max_volt; + u32 max_curr; + u32 out_volt; + u32 op_curr; + bool supported; + bool active; +}; + struct tcpm_port { struct device *dev; @@ -235,6 +256,7 @@ struct tcpm_port { struct completion swap_complete; int swap_status; + unsigned int negotiated_rev; unsigned int message_id; unsigned int caps_count; unsigned int hard_reset_count; @@ -257,15 +279,18 @@ struct tcpm_port { u32 snk_vdo[VDO_MAX_OBJECTS]; unsigned int nr_snk_vdo; - unsigned int max_snk_mv; - unsigned int max_snk_ma; - unsigned int max_snk_mw; unsigned int operating_snk_mw; + bool update_sink_caps; /* Requested current / voltage */ u32 current_limit; u32 supply_voltage; + /* Used to export TA voltage and current */ + struct power_supply *psy; + struct power_supply_desc psy_desc; + enum power_supply_usb_type usb_type; + u32 bist_request; /* PD state for Vendor Defined Messages */ @@ -277,8 +302,13 @@ struct tcpm_port { /* VDO to retry if UFP responder replied busy */ u32 vdo_retry; - /* Alternate mode data */ + /* PPS */ + struct pd_pps_data pps_data; + struct completion pps_complete; + bool pps_pending; + int pps_status; + /* Alternate mode data */ struct pd_mode_data mode_data; struct typec_altmode *partner_altmode[SVID_DISCOVERY_MAX]; struct typec_altmode *port_altmode[SVID_DISCOVERY_MAX]; @@ -496,6 +526,16 @@ static void tcpm_log_source_caps(struct tcpm_port *port) pdo_max_voltage(pdo), pdo_max_power(pdo)); break; + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) == APDO_TYPE_PPS) + scnprintf(msg, sizeof(msg), + "%u-%u mV, %u mA", + pdo_pps_apdo_min_voltage(pdo), + pdo_pps_apdo_max_voltage(pdo), + pdo_pps_apdo_max_current(pdo)); + else + strcpy(msg, "undefined APDO"); + break; default: strcpy(msg, "undefined"); break; @@ -526,21 +566,16 @@ DEFINE_SHOW_ATTRIBUTE(tcpm_debug); static struct dentry *rootdir; -static int tcpm_debugfs_init(struct tcpm_port *port) +static void tcpm_debugfs_init(struct tcpm_port *port) { mutex_init(&port->logbuffer_lock); /* /sys/kernel/debug/tcpm/usbcX */ - if (!rootdir) { + if (!rootdir) rootdir = debugfs_create_dir("tcpm", NULL); - if (!rootdir) - return -ENOMEM; - } port->dentry = debugfs_create_file(dev_name(port->dev), S_IFREG | 0444, rootdir, port, &tcpm_debug_fops); - - return 0; } static void tcpm_debugfs_exit(struct tcpm_port *port) @@ -555,7 +590,7 @@ static void tcpm_log(const struct tcpm_port *port, const char *fmt, ...) { } __printf(2, 3) static void tcpm_log_force(struct tcpm_port *port, const char *fmt, ...) { } static void tcpm_log_source_caps(struct tcpm_port *port) { } -static int tcpm_debugfs_init(const struct tcpm_port *port) { return 0; } +static void tcpm_debugfs_init(const struct tcpm_port *port) { } static void tcpm_debugfs_exit(const struct tcpm_port *port) { } #endif @@ -793,11 +828,13 @@ static int tcpm_pd_send_source_caps(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_CTRL_REJECT, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, 0); } else { msg.header = PD_HEADER_LE(PD_DATA_SOURCE_CAP, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, port->nr_src_pdo); } @@ -818,11 +855,13 @@ static int tcpm_pd_send_sink_caps(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_CTRL_REJECT, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, 0); } else { msg.header = PD_HEADER_LE(PD_DATA_SINK_CAP, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, port->nr_snk_pdo); } @@ -1189,6 +1228,7 @@ static void vdm_run_state_machine(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, port->vdo_count); for (i = 0; i < port->vdo_count; i++) msg.payload[i] = cpu_to_le32(port->vdo_data[i]); @@ -1260,6 +1300,8 @@ enum pdo_err { PDO_ERR_FIXED_NOT_SORTED, PDO_ERR_VARIABLE_BATT_NOT_SORTED, PDO_ERR_DUPE_PDO, + PDO_ERR_PPS_APDO_NOT_SORTED, + PDO_ERR_DUPE_PPS_APDO, }; static const char * const pdo_err_msg[] = { @@ -1275,6 +1317,10 @@ static const char * const pdo_err_msg[] = { " err: Variable/Battery supply pdos should be in increasing order of their minimum voltage", [PDO_ERR_DUPE_PDO] = " err: Variable/Batt supply pdos cannot have same min/max voltage", + [PDO_ERR_PPS_APDO_NOT_SORTED] = + " err: Programmable power supply apdos should be in increasing order of their maximum voltage", + [PDO_ERR_DUPE_PPS_APDO] = + " err: Programmable power supply apdos cannot have same min/max voltage and max current", }; static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo, @@ -1324,6 +1370,26 @@ static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo, pdo_min_voltage(pdo[i - 1]))) return PDO_ERR_DUPE_PDO; break; + /* + * The Programmable Power Supply APDOs, if present, + * shall be sent in Maximum Voltage order; + * lowest to highest. + */ + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo[i]) != APDO_TYPE_PPS) + break; + + if (pdo_pps_apdo_max_current(pdo[i]) < + pdo_pps_apdo_max_current(pdo[i - 1])) + return PDO_ERR_PPS_APDO_NOT_SORTED; + else if (pdo_pps_apdo_min_voltage(pdo[i]) == + pdo_pps_apdo_min_voltage(pdo[i - 1]) && + pdo_pps_apdo_max_voltage(pdo[i]) == + pdo_pps_apdo_max_voltage(pdo[i - 1]) && + pdo_pps_apdo_max_current(pdo[i]) == + pdo_pps_apdo_max_current(pdo[i - 1])) + return PDO_ERR_DUPE_PPS_APDO; + break; default: tcpm_log_force(port, " Unknown pdo type"); } @@ -1349,11 +1415,48 @@ static int tcpm_validate_caps(struct tcpm_port *port, const u32 *pdo, /* * PD (data, control) command handling functions */ +static inline enum tcpm_state ready_state(struct tcpm_port *port) +{ + if (port->pwr_role == TYPEC_SOURCE) + return SRC_READY; + else + return SNK_READY; +} + +static int tcpm_pd_send_control(struct tcpm_port *port, + enum pd_ctrl_msg_type type); + +static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload, + int cnt) +{ + u32 p0 = le32_to_cpu(payload[0]); + unsigned int type = usb_pd_ado_type(p0); + + if (!type) { + tcpm_log(port, "Alert message received with no type"); + return; + } + + /* Just handling non-battery alerts for now */ + if (!(type & USB_PD_ADO_TYPE_BATT_STATUS_CHANGE)) { + switch (port->state) { + case SRC_READY: + case SNK_READY: + tcpm_set_state(port, GET_STATUS_SEND, 0); + break; + default: + tcpm_queue_message(port, PD_MSG_CTRL_WAIT); + break; + } + } +} + static void tcpm_pd_data_request(struct tcpm_port *port, const struct pd_message *msg) { enum pd_data_msg_type type = pd_header_type_le(msg->header); unsigned int cnt = pd_header_cnt_le(msg->header); + unsigned int rev = pd_header_rev_le(msg->header); unsigned int i; switch (type) { @@ -1372,6 +1475,17 @@ static void tcpm_pd_data_request(struct tcpm_port *port, port->nr_source_caps); /* + * Adjust revision in subsequent message headers, as required, + * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't + * support Rev 1.0 so just do nothing in that scenario. + */ + if (rev == PD_REV10) + break; + + if (rev < PD_MAX_REV) + port->negotiated_rev = rev; + + /* * This message may be received even if VBUS is not * present. This is quite unexpected; see USB PD * specification, sections 8.3.3.6.3.1 and 8.3.3.6.3.2. @@ -1392,6 +1506,20 @@ static void tcpm_pd_data_request(struct tcpm_port *port, tcpm_queue_message(port, PD_MSG_CTRL_REJECT); break; } + + /* + * Adjust revision in subsequent message headers, as required, + * to comply with 6.2.1.1.5 of the USB PD 3.0 spec. We don't + * support Rev 1.0 so just reject in that scenario. + */ + if (rev == PD_REV10) { + tcpm_queue_message(port, PD_MSG_CTRL_REJECT); + break; + } + + if (rev < PD_MAX_REV) + port->negotiated_rev = rev; + port->sink_request = le32_to_cpu(msg->payload[0]); tcpm_set_state(port, SRC_NEGOTIATE_CAPABILITIES, 0); break; @@ -1410,12 +1538,29 @@ static void tcpm_pd_data_request(struct tcpm_port *port, tcpm_set_state(port, BIST_RX, 0); } break; + case PD_DATA_ALERT: + tcpm_handle_alert(port, msg->payload, cnt); + break; + case PD_DATA_BATT_STATUS: + case PD_DATA_GET_COUNTRY_INFO: + /* Currently unsupported */ + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + break; default: tcpm_log(port, "Unhandled data message type %#x", type); break; } } +static void tcpm_pps_complete(struct tcpm_port *port, int result) +{ + if (port->pps_pending) { + port->pps_status = result; + port->pps_pending = false; + complete(&port->pps_complete); + } +} + static void tcpm_pd_ctrl_request(struct tcpm_port *port, const struct pd_message *msg) { @@ -1483,6 +1628,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case PD_CTRL_REJECT: case PD_CTRL_WAIT: + case PD_CTRL_NOT_SUPP: switch (port->state) { case SNK_NEGOTIATE_CAPABILITIES: /* USB PD specification, Figure 8-43 */ @@ -1492,6 +1638,14 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, next_state = SNK_WAIT_CAPABILITIES; tcpm_set_state(port, next_state, 0); break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + /* Revert data back from any requested PPS updates */ + port->pps_data.out_volt = port->supply_voltage; + port->pps_data.op_curr = port->current_limit; + port->pps_status = (type == PD_CTRL_WAIT ? + -EAGAIN : -EOPNOTSUPP); + tcpm_set_state(port, SNK_READY, 0); + break; case DR_SWAP_SEND: port->swap_status = (type == PD_CTRL_WAIT ? -EAGAIN : -EOPNOTSUPP); @@ -1514,6 +1668,13 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, case PD_CTRL_ACCEPT: switch (port->state) { case SNK_NEGOTIATE_CAPABILITIES: + port->pps_data.active = false; + tcpm_set_state(port, SNK_TRANSITION_SINK, 0); + break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + port->pps_data.active = true; + port->supply_voltage = port->pps_data.out_volt; + port->current_limit = port->pps_data.op_curr; tcpm_set_state(port, SNK_TRANSITION_SINK, 0); break; case SOFT_RESET_SEND: @@ -1587,12 +1748,75 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; } break; + case PD_CTRL_GET_SOURCE_CAP_EXT: + case PD_CTRL_GET_STATUS: + case PD_CTRL_FR_SWAP: + case PD_CTRL_GET_PPS_STATUS: + case PD_CTRL_GET_COUNTRY_CODES: + /* Currently not supported */ + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + break; default: tcpm_log(port, "Unhandled ctrl message type %#x", type); break; } } +static void tcpm_pd_ext_msg_request(struct tcpm_port *port, + const struct pd_message *msg) +{ + enum pd_ext_msg_type type = pd_header_type_le(msg->header); + unsigned int data_size = pd_ext_header_data_size_le(msg->ext_msg.header); + + if (!(msg->ext_msg.header & PD_EXT_HDR_CHUNKED)) { + tcpm_log(port, "Unchunked extended messages unsupported"); + return; + } + + if (data_size > PD_EXT_MAX_CHUNK_DATA) { + tcpm_log(port, "Chunk handling not yet supported"); + return; + } + + switch (type) { + case PD_EXT_STATUS: + /* + * If PPS related events raised then get PPS status to clear + * (see USB PD 3.0 Spec, 6.5.2.4) + */ + if (msg->ext_msg.data[USB_PD_EXT_SDB_EVENT_FLAGS] & + USB_PD_EXT_SDB_PPS_EVENTS) + tcpm_set_state(port, GET_PPS_STATUS_SEND, 0); + else + tcpm_set_state(port, ready_state(port), 0); + break; + case PD_EXT_PPS_STATUS: + /* + * For now the PPS status message is used to clear events + * and nothing more. + */ + tcpm_set_state(port, ready_state(port), 0); + break; + case PD_EXT_SOURCE_CAP_EXT: + case PD_EXT_GET_BATT_CAP: + case PD_EXT_GET_BATT_STATUS: + case PD_EXT_BATT_CAP: + case PD_EXT_GET_MANUFACTURER_INFO: + case PD_EXT_MANUFACTURER_INFO: + case PD_EXT_SECURITY_REQUEST: + case PD_EXT_SECURITY_RESPONSE: + case PD_EXT_FW_UPDATE_REQUEST: + case PD_EXT_FW_UPDATE_RESPONSE: + case PD_EXT_COUNTRY_INFO: + case PD_EXT_COUNTRY_CODES: + tcpm_queue_message(port, PD_MSG_CTRL_NOT_SUPP); + break; + default: + tcpm_log(port, "Unhandled extended message type %#x", type); + break; + } +} + static void tcpm_pd_rx_handler(struct work_struct *work) { struct pd_rx_event *event = container_of(work, @@ -1633,7 +1857,9 @@ static void tcpm_pd_rx_handler(struct work_struct *work) "Data role mismatch, initiating error recovery"); tcpm_set_state(port, ERROR_RECOVERY, 0); } else { - if (cnt) + if (msg->header & PD_HEADER_EXT_HDR) + tcpm_pd_ext_msg_request(port, msg); + else if (cnt) tcpm_pd_data_request(port, msg); else tcpm_pd_ctrl_request(port, msg); @@ -1668,6 +1894,7 @@ static int tcpm_pd_send_control(struct tcpm_port *port, memset(&msg, 0, sizeof(msg)); msg.header = PD_HEADER_LE(type, port->pwr_role, port->data_role, + port->negotiated_rev, port->message_id, 0); return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); @@ -1693,6 +1920,9 @@ static bool tcpm_send_queued_message(struct tcpm_port *port) case PD_MSG_CTRL_REJECT: tcpm_pd_send_control(port, PD_CTRL_REJECT); break; + case PD_MSG_CTRL_NOT_SUPP: + tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP); + break; case PD_MSG_DATA_SINK_CAP: tcpm_pd_send_sink_caps(port); break; @@ -1772,84 +2002,254 @@ static int tcpm_pd_check_request(struct tcpm_port *port) return 0; } -static int tcpm_pd_select_pdo(struct tcpm_port *port) +#define min_power(x, y) min(pdo_max_power(x), pdo_max_power(y)) +#define min_current(x, y) min(pdo_max_current(x), pdo_max_current(y)) + +static int tcpm_pd_select_pdo(struct tcpm_port *port, int *sink_pdo, + int *src_pdo) { - unsigned int i, max_mw = 0, max_mv = 0; + unsigned int i, j, max_src_mv = 0, min_src_mv = 0, max_mw = 0, + max_mv = 0, src_mw = 0, src_ma = 0, max_snk_mv = 0, + min_snk_mv = 0; int ret = -EINVAL; + port->pps_data.supported = false; + port->usb_type = POWER_SUPPLY_USB_TYPE_PD; + /* - * Select the source PDO providing the most power while staying within - * the board's voltage limits. Prefer PDO providing exp + * Select the source PDO providing the most power which has a + * matchig sink cap. */ for (i = 0; i < port->nr_source_caps; i++) { u32 pdo = port->source_caps[i]; enum pd_pdo_type type = pdo_type(pdo); - unsigned int mv, ma, mw; - if (type == PDO_TYPE_FIXED) - mv = pdo_fixed_voltage(pdo); - else - mv = pdo_min_voltage(pdo); + switch (type) { + case PDO_TYPE_FIXED: + max_src_mv = pdo_fixed_voltage(pdo); + min_src_mv = max_src_mv; + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + max_src_mv = pdo_max_voltage(pdo); + min_src_mv = pdo_min_voltage(pdo); + break; + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) == APDO_TYPE_PPS) { + port->pps_data.supported = true; + port->usb_type = + POWER_SUPPLY_USB_TYPE_PD_PPS; + } + continue; + default: + tcpm_log(port, "Invalid source PDO type, ignoring"); + continue; + } - if (type == PDO_TYPE_BATT) { - mw = pdo_max_power(pdo); - } else { - ma = min(pdo_max_current(pdo), - port->max_snk_ma); - mw = ma * mv / 1000; + switch (type) { + case PDO_TYPE_FIXED: + case PDO_TYPE_VAR: + src_ma = pdo_max_current(pdo); + src_mw = src_ma * min_src_mv / 1000; + break; + case PDO_TYPE_BATT: + src_mw = pdo_max_power(pdo); + break; + case PDO_TYPE_APDO: + continue; + default: + tcpm_log(port, "Invalid source PDO type, ignoring"); + continue; } - /* Perfer higher voltages if available */ - if ((mw > max_mw || (mw == max_mw && mv > max_mv)) && - mv <= port->max_snk_mv) { - ret = i; - max_mw = mw; - max_mv = mv; + for (j = 0; j < port->nr_snk_pdo; j++) { + pdo = port->snk_pdo[j]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_FIXED: + max_snk_mv = pdo_fixed_voltage(pdo); + min_snk_mv = max_snk_mv; + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + max_snk_mv = pdo_max_voltage(pdo); + min_snk_mv = pdo_min_voltage(pdo); + break; + case PDO_TYPE_APDO: + continue; + default: + tcpm_log(port, "Invalid sink PDO type, ignoring"); + continue; + } + + if (max_src_mv <= max_snk_mv && + min_src_mv >= min_snk_mv) { + /* Prefer higher voltages if available */ + if ((src_mw == max_mw && min_src_mv > max_mv) || + src_mw > max_mw) { + *src_pdo = i; + *sink_pdo = j; + max_mw = src_mw; + max_mv = min_src_mv; + ret = 0; + } + } } } return ret; } +#define min_pps_apdo_current(x, y) \ + min(pdo_pps_apdo_max_current(x), pdo_pps_apdo_max_current(y)) + +static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) +{ + unsigned int i, j, max_mw = 0, max_mv = 0; + unsigned int min_src_mv, max_src_mv, src_ma, src_mw; + unsigned int min_snk_mv, max_snk_mv, snk_ma; + u32 pdo; + unsigned int src_pdo = 0, snk_pdo = 0; + + /* + * Select the source PPS APDO providing the most power while staying + * within the board's limits. We skip the first PDO as this is always + * 5V 3A. + */ + for (i = 1; i < port->nr_source_caps; ++i) { + pdo = port->source_caps[i]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) { + tcpm_log(port, "Not PPS APDO (source), ignoring"); + continue; + } + + min_src_mv = pdo_pps_apdo_min_voltage(pdo); + max_src_mv = pdo_pps_apdo_max_voltage(pdo); + src_ma = pdo_pps_apdo_max_current(pdo); + src_mw = (src_ma * max_src_mv) / 1000; + + /* + * Now search through the sink PDOs to find a matching + * PPS APDO. Again skip the first sink PDO as this will + * always be 5V 3A. + */ + for (j = i; j < port->nr_snk_pdo; j++) { + pdo = port->snk_pdo[j]; + + switch (pdo_type(pdo)) { + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) { + tcpm_log(port, + "Not PPS APDO (sink), ignoring"); + continue; + } + + min_snk_mv = + pdo_pps_apdo_min_voltage(pdo); + max_snk_mv = + pdo_pps_apdo_max_voltage(pdo); + snk_ma = + pdo_pps_apdo_max_current(pdo); + break; + default: + tcpm_log(port, + "Not APDO type (sink), ignoring"); + continue; + } + + if (max_src_mv <= max_snk_mv && + min_src_mv >= min_snk_mv) { + /* Prefer higher voltages if available */ + if ((src_mw == max_mw && + min_src_mv > max_mv) || + src_mw > max_mw) { + src_pdo = i; + snk_pdo = j; + max_mw = src_mw; + max_mv = max_src_mv; + } + } + } + + break; + default: + tcpm_log(port, "Not APDO type (source), ignoring"); + continue; + } + } + + if (src_pdo) { + pdo = port->source_caps[src_pdo]; + + port->pps_data.min_volt = pdo_pps_apdo_min_voltage(pdo); + port->pps_data.max_volt = pdo_pps_apdo_max_voltage(pdo); + port->pps_data.max_curr = + min_pps_apdo_current(pdo, port->snk_pdo[snk_pdo]); + port->pps_data.out_volt = + min(pdo_pps_apdo_max_voltage(pdo), port->pps_data.out_volt); + port->pps_data.op_curr = + min(port->pps_data.max_curr, port->pps_data.op_curr); + } + + return src_pdo; +} + static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) { unsigned int mv, ma, mw, flags; unsigned int max_ma, max_mw; enum pd_pdo_type type; - int index; - u32 pdo; + u32 pdo, matching_snk_pdo; + int src_pdo_index = 0; + int snk_pdo_index = 0; + int ret; - index = tcpm_pd_select_pdo(port); - if (index < 0) - return -EINVAL; - pdo = port->source_caps[index]; + ret = tcpm_pd_select_pdo(port, &snk_pdo_index, &src_pdo_index); + if (ret < 0) + return ret; + + pdo = port->source_caps[src_pdo_index]; + matching_snk_pdo = port->snk_pdo[snk_pdo_index]; type = pdo_type(pdo); - if (type == PDO_TYPE_FIXED) + switch (type) { + case PDO_TYPE_FIXED: mv = pdo_fixed_voltage(pdo); - else + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: mv = pdo_min_voltage(pdo); + break; + default: + tcpm_log(port, "Invalid PDO selected!"); + return -EINVAL; + } - /* Select maximum available current within the board's power limit */ + /* Select maximum available current within the sink pdo's limit */ if (type == PDO_TYPE_BATT) { - mw = pdo_max_power(pdo); - ma = 1000 * min(mw, port->max_snk_mw) / mv; + mw = min_power(pdo, matching_snk_pdo); + ma = 1000 * mw / mv; } else { - ma = min(pdo_max_current(pdo), - 1000 * port->max_snk_mw / mv); + ma = min_current(pdo, matching_snk_pdo); + mw = ma * mv / 1000; } - ma = min(ma, port->max_snk_ma); flags = RDO_USB_COMM | RDO_NO_SUSPEND; /* Set mismatch bit if offered power is less than operating power */ - mw = ma * mv / 1000; max_ma = ma; max_mw = mw; if (mw < port->operating_snk_mw) { flags |= RDO_CAP_MISMATCH; - max_mw = port->operating_snk_mw; - max_ma = max_mw * 1000 / mv; + if (type == PDO_TYPE_BATT && + (pdo_max_power(matching_snk_pdo) > pdo_max_power(pdo))) + max_mw = pdo_max_power(matching_snk_pdo); + else if (pdo_max_current(matching_snk_pdo) > + pdo_max_current(pdo)) + max_ma = pdo_max_current(matching_snk_pdo); } tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d", @@ -1858,16 +2258,16 @@ static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) port->polarity); if (type == PDO_TYPE_BATT) { - *rdo = RDO_BATT(index + 1, mw, max_mw, flags); + *rdo = RDO_BATT(src_pdo_index + 1, mw, max_mw, flags); tcpm_log(port, "Requesting PDO %d: %u mV, %u mW%s", - index, mv, mw, + src_pdo_index, mv, mw, flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); } else { - *rdo = RDO_FIXED(index + 1, ma, max_ma, flags); + *rdo = RDO_FIXED(src_pdo_index + 1, ma, max_ma, flags); tcpm_log(port, "Requesting PDO %d: %u mV, %u mA%s", - index, mv, ma, + src_pdo_index, mv, ma, flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); } @@ -1891,6 +2291,105 @@ static int tcpm_pd_send_request(struct tcpm_port *port) msg.header = PD_HEADER_LE(PD_DATA_REQUEST, port->pwr_role, port->data_role, + port->negotiated_rev, + port->message_id, 1); + msg.payload[0] = cpu_to_le32(rdo); + + return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); +} + +static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo) +{ + unsigned int out_mv, op_ma, op_mw, min_mv, max_mv, max_ma, flags; + enum pd_pdo_type type; + unsigned int src_pdo_index; + u32 pdo; + + src_pdo_index = tcpm_pd_select_pps_apdo(port); + if (!src_pdo_index) + return -EOPNOTSUPP; + + pdo = port->source_caps[src_pdo_index]; + type = pdo_type(pdo); + + switch (type) { + case PDO_TYPE_APDO: + if (pdo_apdo_type(pdo) != APDO_TYPE_PPS) { + tcpm_log(port, "Invalid APDO selected!"); + return -EINVAL; + } + min_mv = port->pps_data.min_volt; + max_mv = port->pps_data.max_volt; + max_ma = port->pps_data.max_curr; + out_mv = port->pps_data.out_volt; + op_ma = port->pps_data.op_curr; + break; + default: + tcpm_log(port, "Invalid PDO selected!"); + return -EINVAL; + } + + flags = RDO_USB_COMM | RDO_NO_SUSPEND; + + op_mw = (op_ma * out_mv) / 1000; + if (op_mw < port->operating_snk_mw) { + /* + * Try raising current to meet power needs. If that's not enough + * then try upping the voltage. If that's still not enough + * then we've obviously chosen a PPS APDO which really isn't + * suitable so abandon ship. + */ + op_ma = (port->operating_snk_mw * 1000) / out_mv; + if ((port->operating_snk_mw * 1000) % out_mv) + ++op_ma; + op_ma += RDO_PROG_CURR_MA_STEP - (op_ma % RDO_PROG_CURR_MA_STEP); + + if (op_ma > max_ma) { + op_ma = max_ma; + out_mv = (port->operating_snk_mw * 1000) / op_ma; + if ((port->operating_snk_mw * 1000) % op_ma) + ++out_mv; + out_mv += RDO_PROG_VOLT_MV_STEP - + (out_mv % RDO_PROG_VOLT_MV_STEP); + + if (out_mv > max_mv) { + tcpm_log(port, "Invalid PPS APDO selected!"); + return -EINVAL; + } + } + } + + tcpm_log(port, "cc=%d cc1=%d cc2=%d vbus=%d vconn=%s polarity=%d", + port->cc_req, port->cc1, port->cc2, port->vbus_source, + port->vconn_role == TYPEC_SOURCE ? "source" : "sink", + port->polarity); + + *rdo = RDO_PROG(src_pdo_index + 1, out_mv, op_ma, flags); + + tcpm_log(port, "Requesting APDO %d: %u mV, %u mA", + src_pdo_index, out_mv, op_ma); + + port->pps_data.op_curr = op_ma; + port->pps_data.out_volt = out_mv; + + return 0; +} + +static int tcpm_pd_send_pps_request(struct tcpm_port *port) +{ + struct pd_message msg; + int ret; + u32 rdo; + + ret = tcpm_pd_build_pps_request(port, &rdo); + if (ret < 0) + return ret; + + memset(&msg, 0, sizeof(msg)); + msg.header = PD_HEADER_LE(PD_DATA_REQUEST, + port->pwr_role, + port->data_role, + port->negotiated_rev, port->message_id, 1); msg.payload[0] = cpu_to_le32(rdo); @@ -2077,6 +2576,7 @@ static void tcpm_reset_port(struct tcpm_port *port) tcpm_typec_disconnect(port); port->attached = false; port->pd_capable = false; + port->pps_data.supported = false; /* * First Rx ID should be 0; set this to a sentinel of -1 so that @@ -2094,6 +2594,11 @@ static void tcpm_reset_port(struct tcpm_port *port) tcpm_set_attached_state(port, false); port->try_src_count = 0; port->try_snk_count = 0; + port->supply_voltage = 0; + port->current_limit = 0; + port->usb_type = POWER_SUPPLY_USB_TYPE_C; + + power_supply_changed(port->psy); } static void tcpm_detach(struct tcpm_port *port) @@ -2181,14 +2686,6 @@ static inline enum tcpm_state hard_reset_state(struct tcpm_port *port) return SNK_UNATTACHED; } -static inline enum tcpm_state ready_state(struct tcpm_port *port) -{ - if (port->pwr_role == TYPEC_SOURCE) - return SRC_READY; - else - return SNK_READY; -} - static inline enum tcpm_state unattached_state(struct tcpm_port *port) { if (port->port_type == TYPEC_PORT_DRP) { @@ -2338,6 +2835,7 @@ static void run_state_machine(struct tcpm_port *port) typec_set_pwr_opmode(port->typec_port, opmode); port->pwr_opmode = TYPEC_PWR_MODE_USB; port->caps_count = 0; + port->negotiated_rev = PD_MAX_REV; port->message_id = 0; port->rx_msgid = -1; port->explicit_contract = false; @@ -2398,6 +2896,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_swap_complete(port, 0); tcpm_typec_connect(port); + tcpm_check_send_discover(port); /* * 6.3.5 @@ -2421,6 +2920,7 @@ static void run_state_machine(struct tcpm_port *port) case SNK_UNATTACHED: if (!port->non_pd_role_swap) tcpm_swap_complete(port, -ENOTCONN); + tcpm_pps_complete(port, -ENOTCONN); tcpm_snk_detach(port); if (tcpm_start_drp_toggling(port)) { tcpm_set_state(port, DRP_TOGGLING, 0); @@ -2510,6 +3010,7 @@ static void run_state_machine(struct tcpm_port *port) port->cc2 : port->cc1); typec_set_pwr_opmode(port->typec_port, opmode); port->pwr_opmode = TYPEC_PWR_MODE_USB; + port->negotiated_rev = PD_MAX_REV; port->message_id = 0; port->rx_msgid = -1; port->explicit_contract = false; @@ -2580,6 +3081,24 @@ static void run_state_machine(struct tcpm_port *port) PD_T_SENDER_RESPONSE); } break; + case SNK_NEGOTIATE_PPS_CAPABILITIES: + ret = tcpm_pd_send_pps_request(port); + if (ret < 0) { + port->pps_status = ret; + /* + * If this was called due to updates to sink + * capabilities, and pps is no longer valid, we should + * safely fall back to a standard PDO. + */ + if (port->update_sink_caps) + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + else + tcpm_set_state(port, SNK_READY, 0); + } else { + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + } + break; case SNK_TRANSITION_SINK: case SNK_TRANSITION_SINK_VBUS: tcpm_set_state(port, hard_reset_state(port), @@ -2587,6 +3106,7 @@ static void run_state_machine(struct tcpm_port *port) break; case SNK_READY: port->try_snk_count = 0; + port->update_sink_caps = false; if (port->explicit_contract) { typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD); @@ -2596,6 +3116,10 @@ static void run_state_machine(struct tcpm_port *port) tcpm_swap_complete(port, 0); tcpm_typec_connect(port); tcpm_check_send_discover(port); + tcpm_pps_complete(port, port->pps_status); + + power_supply_changed(port->psy); + break; /* Accessory states */ @@ -2642,6 +3166,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, SRC_UNATTACHED, PD_T_PS_SOURCE_ON); break; case SNK_HARD_RESET_SINK_OFF: + memset(&port->pps_data, 0, sizeof(port->pps_data)); tcpm_set_vconn(port, false); tcpm_set_charge(port, false); tcpm_set_roles(port, false, TYPEC_SINK, TYPEC_DEVICE); @@ -2860,8 +3385,25 @@ static void run_state_machine(struct tcpm_port *port) /* Always switch to unattached state */ tcpm_set_state(port, unattached_state(port), 0); break; + case GET_STATUS_SEND: + tcpm_pd_send_control(port, PD_CTRL_GET_STATUS); + tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case GET_STATUS_SEND_TIMEOUT: + tcpm_set_state(port, ready_state(port), 0); + break; + case GET_PPS_STATUS_SEND: + tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS); + tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT, + PD_T_SENDER_RESPONSE); + break; + case GET_PPS_STATUS_SEND_TIMEOUT: + tcpm_set_state(port, ready_state(port), 0); + break; case ERROR_RECOVERY: tcpm_swap_complete(port, -EPROTO); + tcpm_pps_complete(port, -EPROTO); tcpm_set_state(port, PORT_RESET, 0); break; case PORT_RESET: @@ -3444,6 +3986,162 @@ static int tcpm_try_role(const struct typec_capability *cap, int role) return ret; } +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) +{ + unsigned int target_mw; + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.active) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (op_curr > port->pps_data.max_curr) { + ret = -EINVAL; + goto port_unlock; + } + + target_mw = (op_curr * port->pps_data.out_volt) / 1000; + if (target_mw < port->operating_snk_mw) { + ret = -EINVAL; + goto port_unlock; + } + + reinit_completion(&port->pps_complete); + port->pps_data.op_curr = op_curr; + port->pps_status = 0; + port->pps_pending = true; + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) +{ + unsigned int target_mw; + int ret; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.active) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + if (out_volt < port->pps_data.min_volt || + out_volt > port->pps_data.max_volt) { + ret = -EINVAL; + goto port_unlock; + } + + target_mw = (port->pps_data.op_curr * out_volt) / 1000; + if (target_mw < port->operating_snk_mw) { + ret = -EINVAL; + goto port_unlock; + } + + reinit_completion(&port->pps_complete); + port->pps_data.out_volt = out_volt; + port->pps_status = 0; + port->pps_pending = true; + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + +static int tcpm_pps_activate(struct tcpm_port *port, bool activate) +{ + int ret = 0; + + mutex_lock(&port->swap_lock); + mutex_lock(&port->lock); + + if (!port->pps_data.supported) { + ret = -EOPNOTSUPP; + goto port_unlock; + } + + /* Trying to deactivate PPS when already deactivated so just bail */ + if (!port->pps_data.active && !activate) + goto port_unlock; + + if (port->state != SNK_READY) { + ret = -EAGAIN; + goto port_unlock; + } + + reinit_completion(&port->pps_complete); + port->pps_status = 0; + port->pps_pending = true; + + /* Trigger PPS request or move back to standard PDO contract */ + if (activate) { + port->pps_data.out_volt = port->supply_voltage; + port->pps_data.op_curr = port->current_limit; + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + } else { + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + } + mutex_unlock(&port->lock); + + if (!wait_for_completion_timeout(&port->pps_complete, + msecs_to_jiffies(PD_PPS_CTRL_TIMEOUT))) + ret = -ETIMEDOUT; + else + ret = port->pps_status; + + goto swap_unlock; + +port_unlock: + mutex_unlock(&port->lock); +swap_unlock: + mutex_unlock(&port->swap_lock); + + return ret; +} + static void tcpm_init(struct tcpm_port *port) { enum typec_cc_status cc1, cc2; @@ -3569,9 +4267,6 @@ EXPORT_SYMBOL_GPL(tcpm_update_source_capabilities); int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, unsigned int nr_pdo, - unsigned int max_snk_mv, - unsigned int max_snk_ma, - unsigned int max_snk_mw, unsigned int operating_snk_mw) { if (tcpm_validate_caps(port, pdo, nr_pdo)) @@ -3579,17 +4274,19 @@ int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, mutex_lock(&port->lock); port->nr_snk_pdo = tcpm_copy_pdos(port->snk_pdo, pdo, nr_pdo); - port->max_snk_mv = max_snk_mv; - port->max_snk_ma = max_snk_ma; - port->max_snk_mw = max_snk_mw; port->operating_snk_mw = operating_snk_mw; + port->update_sink_caps = true; switch (port->state) { case SNK_NEGOTIATE_CAPABILITIES: + case SNK_NEGOTIATE_PPS_CAPABILITIES: case SNK_READY: case SNK_TRANSITION_SINK: case SNK_TRANSITION_SINK_VBUS: - tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); + if (port->pps_data.active) + tcpm_set_state(port, SNK_NEGOTIATE_PPS_CAPABILITIES, 0); + else + tcpm_set_state(port, SNK_NEGOTIATE_CAPABILITIES, 0); break; default: break; @@ -3599,6 +4296,231 @@ int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, } EXPORT_SYMBOL_GPL(tcpm_update_sink_capabilities); +/* Power Supply access to expose source power information */ +enum tcpm_psy_online_states { + TCPM_PSY_OFFLINE = 0, + TCPM_PSY_FIXED_ONLINE, + TCPM_PSY_PROG_ONLINE, +}; + +static enum power_supply_property tcpm_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int tcpm_psy_get_online(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->vbus_charge) { + if (port->pps_data.active) + val->intval = TCPM_PSY_PROG_ONLINE; + else + val->intval = TCPM_PSY_FIXED_ONLINE; + } else { + val->intval = TCPM_PSY_OFFLINE; + } + + return 0; +} + +static int tcpm_psy_get_voltage_min(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.min_volt * 1000; + else + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_voltage_max(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.max_volt * 1000; + else + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_voltage_now(struct tcpm_port *port, + union power_supply_propval *val) +{ + val->intval = port->supply_voltage * 1000; + + return 0; +} + +static int tcpm_psy_get_current_max(struct tcpm_port *port, + union power_supply_propval *val) +{ + if (port->pps_data.active) + val->intval = port->pps_data.max_curr * 1000; + else + val->intval = port->current_limit * 1000; + + return 0; +} + +static int tcpm_psy_get_current_now(struct tcpm_port *port, + union power_supply_propval *val) +{ + val->intval = port->current_limit * 1000; + + return 0; +} + +static int tcpm_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct tcpm_port *port = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = port->usb_type; + break; + case POWER_SUPPLY_PROP_ONLINE: + ret = tcpm_psy_get_online(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + ret = tcpm_psy_get_voltage_min(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + ret = tcpm_psy_get_voltage_max(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = tcpm_psy_get_voltage_now(port, val); + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + ret = tcpm_psy_get_current_max(port, val); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = tcpm_psy_get_current_now(port, val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_set_online(struct tcpm_port *port, + const union power_supply_propval *val) +{ + int ret; + + switch (val->intval) { + case TCPM_PSY_FIXED_ONLINE: + ret = tcpm_pps_activate(port, false); + break; + case TCPM_PSY_PROG_ONLINE: + ret = tcpm_pps_activate(port, true); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct tcpm_port *port = power_supply_get_drvdata(psy); + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = tcpm_psy_set_online(port, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (val->intval < port->pps_data.min_volt * 1000 || + val->intval > port->pps_data.max_volt * 1000) + ret = -EINVAL; + else + ret = tcpm_pps_set_out_volt(port, val->intval / 1000); + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (val->intval > port->pps_data.max_curr * 1000) + ret = -EINVAL; + else + ret = tcpm_pps_set_op_curr(port, val->intval / 1000); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int tcpm_psy_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_CURRENT_NOW: + return 1; + default: + return 0; + } +} + +static enum power_supply_usb_type tcpm_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, + POWER_SUPPLY_USB_TYPE_PD_PPS, +}; + +static const char *tcpm_psy_name_prefix = "tcpm-source-psy-"; + +static int devm_tcpm_psy_register(struct tcpm_port *port) +{ + struct power_supply_config psy_cfg = {}; + const char *port_dev_name = dev_name(port->dev); + size_t psy_name_len = strlen(tcpm_psy_name_prefix) + + strlen(port_dev_name) + 1; + char *psy_name; + + psy_cfg.drv_data = port; + psy_cfg.fwnode = dev_fwnode(port->dev); + psy_name = devm_kzalloc(port->dev, psy_name_len, GFP_KERNEL); + if (!psy_name) + return -ENOMEM; + + snprintf(psy_name, psy_name_len, "%s%s", tcpm_psy_name_prefix, + port_dev_name); + port->psy_desc.name = psy_name; + port->psy_desc.type = POWER_SUPPLY_TYPE_USB, + port->psy_desc.usb_types = tcpm_psy_usb_types; + port->psy_desc.num_usb_types = ARRAY_SIZE(tcpm_psy_usb_types); + port->psy_desc.properties = tcpm_psy_props, + port->psy_desc.num_properties = ARRAY_SIZE(tcpm_psy_props), + port->psy_desc.get_property = tcpm_psy_get_prop, + port->psy_desc.set_property = tcpm_psy_set_prop, + port->psy_desc.property_is_writeable = tcpm_psy_prop_writeable, + + port->usb_type = POWER_SUPPLY_USB_TYPE_C; + + port->psy = devm_power_supply_register(port->dev, &port->psy_desc, + &psy_cfg); + + return PTR_ERR_OR_ZERO(port->psy); +} + struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) { struct tcpm_port *port; @@ -3631,6 +4553,7 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) init_completion(&port->tx_complete); init_completion(&port->swap_complete); + init_completion(&port->pps_complete); tcpm_debugfs_init(port); if (tcpm_validate_caps(port, tcpc->config->src_pdo, @@ -3647,9 +4570,6 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) port->nr_snk_vdo = tcpm_copy_vdos(port->snk_vdo, tcpc->config->snk_vdo, tcpc->config->nr_snk_vdo); - port->max_snk_mv = tcpc->config->max_snk_mv; - port->max_snk_ma = tcpc->config->max_snk_ma; - port->max_snk_mw = tcpc->config->max_snk_mw; port->operating_snk_mw = tcpc->config->operating_snk_mw; if (!tcpc->config->try_role_hw) port->try_role = tcpc->config->default_role; @@ -3660,7 +4580,7 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) port->typec_caps.type = tcpc->config->type; port->typec_caps.data = tcpc->config->data; port->typec_caps.revision = 0x0120; /* Type-C spec release 1.2 */ - port->typec_caps.pd_revision = 0x0200; /* USB-PD spec release 2.0 */ + port->typec_caps.pd_revision = 0x0300; /* USB-PD spec release 3.0 */ port->typec_caps.dr_set = tcpm_dr_set; port->typec_caps.pr_set = tcpm_pr_set; port->typec_caps.vconn_set = tcpm_vconn_set; @@ -3676,6 +4596,10 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) goto out_destroy_wq; } + err = devm_tcpm_psy_register(port); + if (err) + goto out_destroy_wq; + port->typec_port = typec_register_port(port->dev, &port->typec_caps); if (IS_ERR(port->typec_port)) { err = PTR_ERR(port->typec_port); diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c index 19cca7f1b2c5..423208e19383 100644 --- a/drivers/usb/typec/typec_wcove.c +++ b/drivers/usb/typec/typec_wcove.c @@ -202,6 +202,10 @@ static int wcove_init(struct tcpc_dev *tcpc) struct wcove_typec *wcove = tcpc_to_wcove(tcpc); int ret; + ret = regmap_write(wcove->regmap, USBC_CONTROL1, 0); + if (ret) + return ret; + /* Unmask everything */ ret = regmap_write(wcove->regmap, USBC_IRQMASK1, 0); if (ret) @@ -285,8 +289,30 @@ static int wcove_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1, static int wcove_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc) { - /* XXX: Relying on the HW FSM to configure things correctly for now */ - return 0; + struct wcove_typec *wcove = tcpc_to_wcove(tcpc); + unsigned int ctrl; + + switch (cc) { + case TYPEC_CC_RD: + ctrl = USBC_CONTROL1_MODE_SNK; + break; + case TYPEC_CC_RP_DEF: + ctrl = USBC_CONTROL1_CURSRC_UA_80 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_1_5: + ctrl = USBC_CONTROL1_CURSRC_UA_180 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_RP_3_0: + ctrl = USBC_CONTROL1_CURSRC_UA_330 | USBC_CONTROL1_MODE_SRC; + break; + case TYPEC_CC_OPEN: + ctrl = 0; + break; + default: + return -EINVAL; + } + + return regmap_write(wcove->regmap, USBC_CONTROL1, ctrl); } static int wcove_set_polarity(struct tcpc_dev *tcpc, enum typec_cc_polarity pol) @@ -558,6 +584,7 @@ static const u32 src_pdo[] = { static const u32 snk_pdo[] = { PDO_FIXED(5000, 500, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM), + PDO_VAR(5000, 12000, 3000), }; static struct tcpc_config wcove_typec_config = { @@ -566,9 +593,6 @@ static struct tcpc_config wcove_typec_config = { .snk_pdo = snk_pdo, .nr_snk_pdo = ARRAY_SIZE(snk_pdo), - .max_snk_mv = 12000, - .max_snk_ma = 3000, - .max_snk_mw = 36000, .operating_snk_mw = 15000, .type = TYPEC_PORT_DRP, diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c index 48808388ec33..be37aec250c2 100644 --- a/drivers/usb/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c @@ -10,6 +10,9 @@ #include <linux/platform_device.h> #include <linux/slab.h> +/* Hardening for Spectre-v1 */ +#include <linux/nospec.h> + #include "usbip_common.h" #include "vhci.h" @@ -205,16 +208,20 @@ static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport) return 0; } -static int valid_port(__u32 pdev_nr, __u32 rhport) +static int valid_port(__u32 *pdev_nr, __u32 *rhport) { - if (pdev_nr >= vhci_num_controllers) { - pr_err("pdev %u\n", pdev_nr); + if (*pdev_nr >= vhci_num_controllers) { + pr_err("pdev %u\n", *pdev_nr); return 0; } - if (rhport >= VHCI_HC_PORTS) { - pr_err("rhport %u\n", rhport); + *pdev_nr = array_index_nospec(*pdev_nr, vhci_num_controllers); + + if (*rhport >= VHCI_HC_PORTS) { + pr_err("rhport %u\n", *rhport); return 0; } + *rhport = array_index_nospec(*rhport, VHCI_HC_PORTS); + return 1; } @@ -232,7 +239,7 @@ static ssize_t detach_store(struct device *dev, struct device_attribute *attr, pdev_nr = port_to_pdev_nr(port); rhport = port_to_rhport(port); - if (!valid_port(pdev_nr, rhport)) + if (!valid_port(&pdev_nr, &rhport)) return -EINVAL; hcd = platform_get_drvdata(vhcis[pdev_nr].pdev); @@ -258,7 +265,8 @@ static ssize_t detach_store(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_WO(detach); -static int valid_args(__u32 pdev_nr, __u32 rhport, enum usb_device_speed speed) +static int valid_args(__u32 *pdev_nr, __u32 *rhport, + enum usb_device_speed speed) { if (!valid_port(pdev_nr, rhport)) { return 0; @@ -322,7 +330,7 @@ static ssize_t attach_store(struct device *dev, struct device_attribute *attr, sockfd, devid, speed); /* check received parameters */ - if (!valid_args(pdev_nr, rhport, speed)) + if (!valid_args(&pdev_nr, &rhport, speed)) return -EINVAL; hcd = platform_get_drvdata(vhcis[pdev_nr].pdev); diff --git a/include/dt-bindings/phy/phy-qcom-qusb2.h b/include/dt-bindings/phy/phy-qcom-qusb2.h new file mode 100644 index 000000000000..5c5e4d800cac --- /dev/null +++ b/include/dt-bindings/phy/phy-qcom-qusb2.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_PHY_QUSB2_H_ +#define _DT_BINDINGS_QCOM_PHY_QUSB2_H_ + +/* PHY HSTX TRIM bit values (24mA to 15mA) */ +#define QUSB2_V2_HSTX_TRIM_24_0_MA 0x0 +#define QUSB2_V2_HSTX_TRIM_23_4_MA 0x1 +#define QUSB2_V2_HSTX_TRIM_22_8_MA 0x2 +#define QUSB2_V2_HSTX_TRIM_22_2_MA 0x3 +#define QUSB2_V2_HSTX_TRIM_21_6_MA 0x4 +#define QUSB2_V2_HSTX_TRIM_21_0_MA 0x5 +#define QUSB2_V2_HSTX_TRIM_20_4_MA 0x6 +#define QUSB2_V2_HSTX_TRIM_19_8_MA 0x7 +#define QUSB2_V2_HSTX_TRIM_19_2_MA 0x8 +#define QUSB2_V2_HSTX_TRIM_18_6_MA 0x9 +#define QUSB2_V2_HSTX_TRIM_18_0_MA 0xa +#define QUSB2_V2_HSTX_TRIM_17_4_MA 0xb +#define QUSB2_V2_HSTX_TRIM_16_8_MA 0xc +#define QUSB2_V2_HSTX_TRIM_16_2_MA 0xd +#define QUSB2_V2_HSTX_TRIM_15_6_MA 0xe +#define QUSB2_V2_HSTX_TRIM_15_0_MA 0xf + +/* PHY PREEMPHASIS bit values */ +#define QUSB2_V2_PREEMPHASIS_NONE 0 +#define QUSB2_V2_PREEMPHASIS_5_PERCENT 1 +#define QUSB2_V2_PREEMPHASIS_10_PERCENT 2 +#define QUSB2_V2_PREEMPHASIS_15_PERCENT 3 + +/* PHY PREEMPHASIS-WIDTH bit values */ +#define QUSB2_V2_PREEMPHASIS_WIDTH_FULL_BIT 0 +#define QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT 1 + +#endif diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index f0139b460a72..b21c4bd96b84 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -145,6 +145,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */ + POWER_SUPPLY_PROP_USB_TYPE, POWER_SUPPLY_PROP_SCOPE, POWER_SUPPLY_PROP_PRECHARGE_CURRENT, POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, @@ -170,6 +171,19 @@ enum power_supply_type { POWER_SUPPLY_TYPE_APPLE_BRICK_ID, /* Apple Charging Method */ }; +enum power_supply_usb_type { + POWER_SUPPLY_USB_TYPE_UNKNOWN = 0, + POWER_SUPPLY_USB_TYPE_SDP, /* Standard Downstream Port */ + POWER_SUPPLY_USB_TYPE_DCP, /* Dedicated Charging Port */ + POWER_SUPPLY_USB_TYPE_CDP, /* Charging Downstream Port */ + POWER_SUPPLY_USB_TYPE_ACA, /* Accessory Charger Adapters */ + POWER_SUPPLY_USB_TYPE_C, /* Type C Port */ + POWER_SUPPLY_USB_TYPE_PD, /* Power Delivery Port */ + POWER_SUPPLY_USB_TYPE_PD_DRP, /* PD Dual Role Port */ + POWER_SUPPLY_USB_TYPE_PD_PPS, /* PD Programmable Power Supply */ + POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID, /* Apple Charging Method */ +}; + enum power_supply_notifier_events { PSY_EVENT_PROP_CHANGED, }; @@ -185,6 +199,8 @@ struct power_supply; /* Run-time specific power supply configuration */ struct power_supply_config { struct device_node *of_node; + struct fwnode_handle *fwnode; + /* Driver private data */ void *drv_data; @@ -196,6 +212,8 @@ struct power_supply_config { struct power_supply_desc { const char *name; enum power_supply_type type; + enum power_supply_usb_type *usb_types; + size_t num_usb_types; enum power_supply_property *properties; size_t num_properties; diff --git a/include/linux/tty.h b/include/linux/tty.h index 9bd7d37adbfa..c56e3978b00f 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -528,7 +528,7 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty) } extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); -extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); +extern int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b); extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); diff --git a/include/linux/usb.h b/include/linux/usb.h index 0173597e59aa..4cdd515a4385 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -490,6 +490,16 @@ enum usb_port_connect_type { }; /* + * USB port quirks. + */ + +/* For the given port, prefer the old (faster) enumeration scheme. */ +#define USB_PORT_QUIRK_OLD_SCHEME BIT(0) + +/* Decrease TRSTRCY to 10ms during device enumeration. */ +#define USB_PORT_QUIRK_FAST_ENUM BIT(1) + +/* * USB 2.0 Link Power Management (LPM) parameters. */ struct usb2_lpm_parameters { @@ -551,6 +561,8 @@ struct usb3_lpm_parameters { * @route: tree topology hex string for use with xHCI * @state: device state: configured, not attached, etc. * @speed: device speed: high/full/low (or error) + * @rx_lanes: number of rx lanes in use, USB 3.2 adds dual-lane support + * @tx_lanes: number of tx lanes in use, USB 3.2 adds dual-lane support * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub * @ttport: device port on that tt hub * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints @@ -624,6 +636,8 @@ struct usb_device { u32 route; enum usb_device_state state; enum usb_device_speed speed; + unsigned int rx_lanes; + unsigned int tx_lanes; struct usb_tt *tt; int ttport; diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h deleted file mode 100644 index 9bb00df3b53f..000000000000 --- a/include/linux/usb/atmel_usba_udc.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Platform data definitions for Atmel USBA gadget driver. - */ -#ifndef __LINUX_USB_USBA_H -#define __LINUX_USB_USBA_H - -struct usba_ep_data { - char *name; - int index; - int fifo_size; - int nr_banks; - int can_dma; - int can_isoc; -}; - -struct usba_platform_data { - int vbus_pin; - int vbus_pin_inverted; - int num_ep; - struct usba_ep_data ep[0]; -}; - -#endif /* __LINUX_USB_USBA_H */ diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h index aaafecf073ff..49699255cfd3 100644 --- a/include/linux/usb/audio-v2.h +++ b/include/linux/usb/audio-v2.h @@ -94,7 +94,7 @@ struct uac_clock_selector_descriptor { __u8 bClockID; __u8 bNrInPins; __u8 baCSourceID[]; - /* bmControls, bAssocTerminal and iClockSource omitted */ + /* bmControls and iClockSource omitted */ } __attribute__((packed)); /* 4.7.2.3 Clock Multiplier Descriptor */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 847f423ad9b3..e5cd84a0f84a 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -763,7 +763,7 @@ struct usb_gadget_string_container { }; /* put descriptor for string with that id into buf (buflen >= 256) */ -int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf); +int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *buf); /*-------------------------------------------------------------------------*/ diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index aef50cb2ed1b..34a6ded6f319 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -150,7 +150,6 @@ struct usb_hcd { unsigned rh_pollable:1; /* may we poll the root hub? */ unsigned msix_enabled:1; /* driver has MSI-X enabled? */ unsigned msi_enabled:1; /* driver has MSI enabled? */ - unsigned remove_phy:1; /* auto-remove USB phy */ /* * do not manage the PHY state in the HCD core, instead let the driver * handle this (for example if the PHY can only be turned on after a @@ -261,6 +260,7 @@ struct hc_driver { #define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ #define HCD_USB3 0x0040 /* USB 3.0 */ #define HCD_USB31 0x0050 /* USB 3.1 */ +#define HCD_USB32 0x0060 /* USB 3.2 */ #define HCD_MASK 0x0070 #define HCD_BH 0x0100 /* URB complete in BH context */ diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 9eb908a98033..fc6c77918481 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -67,28 +67,13 @@ struct musb_hdrc_config { /* MUSB configuration-specific details */ unsigned multipoint:1; /* multipoint device */ unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */ - unsigned soft_con:1 __deprecated; /* soft connect required */ - unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */ - unsigned big_endian:1; /* true if CPU uses big-endian */ - unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */ - unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */ - unsigned high_iso_tx:1; /* Tx ep required for HB iso */ - unsigned high_iso_rx:1; /* Rx ep required for HD iso */ - unsigned dma:1 __deprecated; /* supports DMA */ - unsigned vendor_req:1 __deprecated; /* vendor registers required */ /* need to explicitly de-assert the port reset after resume? */ unsigned host_port_deassert_reset_at_resume:1; u8 num_eps; /* number of endpoints _with_ ep0 */ - u8 dma_channels __deprecated; /* number of dma channels */ - u8 dyn_fifo_size; /* dynamic size in bytes */ - u8 vendor_ctrl __deprecated; /* vendor control reg width */ - u8 vendor_stat __deprecated; /* vendor status reg witdh */ - u8 dma_req_chan __deprecated; /* bitmask for required dma channels */ u8 ram_bits; /* ram address size */ - struct musb_hdrc_eps_bits *eps_bits __deprecated; u32 maximum_speed; }; diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index ff359bdfdc7b..09b570feb297 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -103,8 +103,8 @@ enum pd_ext_msg_type { (((cnt) & PD_HEADER_CNT_MASK) << PD_HEADER_CNT_SHIFT) | \ ((ext_hdr) ? PD_HEADER_EXT_HDR : 0)) -#define PD_HEADER_LE(type, pwr, data, id, cnt) \ - cpu_to_le16(PD_HEADER((type), (pwr), (data), PD_REV20, (id), (cnt), (0))) +#define PD_HEADER_LE(type, pwr, data, rev, id, cnt) \ + cpu_to_le16(PD_HEADER((type), (pwr), (data), (rev), (id), (cnt), (0))) static inline unsigned int pd_header_cnt(u16 header) { diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index b7a2625947f5..e4de6bc1f69b 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -157,22 +157,6 @@ struct usb_phy { enum usb_charger_type (*charger_detect)(struct usb_phy *x); }; -/** - * struct usb_phy_bind - represent the binding for the phy - * @dev_name: the device name of the device that will bind to the phy - * @phy_dev_name: the device name of the phy - * @index: used if a single controller uses multiple phys - * @phy: reference to the phy - * @list: to maintain a linked list of the binding information - */ -struct usb_phy_bind { - const char *dev_name; - const char *phy_dev_name; - u8 index; - struct usb_phy *phy; - struct list_head list; -}; - /* for board-specific init logic */ extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); extern int usb_add_phy_dev(struct usb_phy *); @@ -234,16 +218,12 @@ usb_phy_vbus_off(struct usb_phy *x) extern struct usb_phy *usb_get_phy(enum usb_phy_type type); extern struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type); -extern struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index); -extern struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index); extern struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index); extern struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, struct device_node *node, struct notifier_block *nb); extern void usb_put_phy(struct usb_phy *); extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); -extern int usb_bind_phy(const char *dev_name, u8 index, - const char *phy_dev_name); extern void usb_phy_set_event(struct usb_phy *x, unsigned long event); extern void usb_phy_set_charger_current(struct usb_phy *usb_phy, unsigned int mA); @@ -263,16 +243,6 @@ static inline struct usb_phy *devm_usb_get_phy(struct device *dev, return ERR_PTR(-ENXIO); } -static inline struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) -{ - return ERR_PTR(-ENXIO); -} - -static inline struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) -{ - return ERR_PTR(-ENXIO); -} - static inline struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index) { @@ -293,12 +263,6 @@ static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) { } -static inline int usb_bind_phy(const char *dev_name, u8 index, - const char *phy_dev_name) -{ - return -EOPNOTSUPP; -} - static inline void usb_phy_set_event(struct usb_phy *x, unsigned long event) { } diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index f0d839daeaea..b231b9314240 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -36,6 +36,7 @@ enum typec_cc_polarity { /* Time to wait for TCPC to complete transmit */ #define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */ #define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10) +#define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10) enum tcpm_transmit_status { TCPC_TX_SUCCESS = 0, @@ -62,9 +63,6 @@ enum tcpm_transmit_type { * @snk_pdo: PDO parameters sent to partner as response to * PD_CTRL_GET_SINK_CAP message * @nr_snk_pdo: Number of entries in @snk_pdo - * @max_snk_mv: Maximum acceptable sink voltage in mV - * @max_snk_ma: Maximum sink current in mA - * @max_snk_mw: Maximum required sink power in mW * @operating_snk_mw: * Required operating sink power in mW * @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or @@ -85,9 +83,6 @@ struct tcpc_config { const u32 *snk_vdo; unsigned int nr_snk_vdo; - unsigned int max_snk_mv; - unsigned int max_snk_ma; - unsigned int max_snk_mw; unsigned int operating_snk_mw; enum typec_port_type type; @@ -174,9 +169,6 @@ int tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo, unsigned int nr_pdo); int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, unsigned int nr_pdo, - unsigned int max_snk_mv, - unsigned int max_snk_ma, - unsigned int max_snk_mw, unsigned int operating_snk_mw); void tcpm_vbus_change(struct tcpm_port *port); diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index d641ea1660b7..0c5c3ea8b2d7 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -17,6 +17,7 @@ #define __TEGRA_USB_PHY_H #include <linux/clk.h> +#include <linux/reset.h> #include <linux/usb/otg.h> /* @@ -76,6 +77,7 @@ struct tegra_usb_phy { bool is_legacy_phy; bool is_ulpi_phy; int reset_gpio; + struct reset_control *pad_rst; }; void tegra_usb_phy_preresume(struct usb_phy *phy); diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h index 29c120c88747..fb0cd24c392c 100644 --- a/include/uapi/linux/usb/ch11.h +++ b/include/uapi/linux/usb/ch11.h @@ -197,6 +197,11 @@ struct usb_port_status { #define USB_EXT_PORT_STAT_RX_LANES 0x00000f00 #define USB_EXT_PORT_STAT_TX_LANES 0x0000f000 +#define USB_EXT_PORT_RX_LANES(p) \ + (((p) & USB_EXT_PORT_STAT_RX_LANES) >> 8) +#define USB_EXT_PORT_TX_LANES(p) \ + (((p) & USB_EXT_PORT_STAT_TX_LANES) >> 12) + /* * wHubCharacteristics (masks) * See USB 2.0 spec Table 11-13, offset 3 diff --git a/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh b/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh new file mode 100755 index 000000000000..1893d0f59ad7 --- /dev/null +++ b/tools/testing/selftests/drivers/usb/usbip/usbip_test.sh @@ -0,0 +1,198 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +usage() { echo "usbip_test.sh -b <busid> -p <usbip tools path>"; exit 1; } + +while getopts "h:b:p:" arg; do + case "${arg}" in + h) + usage + ;; + b) + busid=${OPTARG} + ;; + p) + tools_path=${OPTARG} + ;; + *) + usage + ;; + esac +done +shift $((OPTIND-1)) + +if [ -z "${busid}" ]; then + usage +fi + +echo "Running USB over IP Testing on $busid"; + +test_end_msg="End of USB over IP Testing on $busid" + +if [ $UID != 0 ]; then + echo "Please run usbip_test as root [SKIP]" + echo $test_end_msg + exit $ksft_skip +fi + +echo "Load usbip_host module" +if ! /sbin/modprobe -q -n usbip_host; then + echo "usbip_test: module usbip_host is not found [SKIP]" + echo $test_end_msg + exit $ksft_skip +fi + +if /sbin/modprobe -q usbip_host; then + /sbin/modprobe -q -r test_bitmap + echo "usbip_test: module usbip_host is loaded [OK]" +else + echo "usbip_test: module usbip_host failed to load [FAIL]" + echo $test_end_msg + exit 1 +fi + +echo "Load vhci_hcd module" +if /sbin/modprobe -q vhci_hcd; then + /sbin/modprobe -q -r test_bitmap + echo "usbip_test: module vhci_hcd is loaded [OK]" +else + echo "usbip_test: module vhci_hcd failed to load [FAIL]" + echo $test_end_msg + exit 1 +fi +echo "==============================================================" + +cd $tools_path; + +if [ ! -f src/usbip ]; then + echo "Please build usbip tools" + echo $test_end_msg + exit $ksft_skip +fi + +echo "Expect to see export-able devices"; +src/usbip list -l; +echo "==============================================================" + +echo "Run lsusb to see all usb devices" +lsusb -t; +echo "==============================================================" + +src/usbipd -D; + +echo "Get exported devices from localhost - expect to see none"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "bind devices"; +src/usbip bind -b $busid; +echo "==============================================================" + +echo "Run lsusb - bound devices should be under usbip_host control" +lsusb -t; +echo "==============================================================" + +echo "bind devices - expect already bound messages" +src/usbip bind -b $busid; +echo "==============================================================" + +echo "Get exported devices from localhost - expect to see exported devices"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "unbind devices"; +src/usbip unbind -b $busid; +echo "==============================================================" + +echo "Run lsusb - bound devices should be rebound to original drivers" +lsusb -t; +echo "==============================================================" + +echo "unbind devices - expect no devices bound message"; +src/usbip unbind -b $busid; +echo "==============================================================" + +echo "Get exported devices from localhost - expect to see none"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "List imported devices - expect to see none"; +src/usbip port; +echo "==============================================================" + +echo "Import devices from localhost - should fail with no devices" +src/usbip attach -r localhost -b $busid; +echo "==============================================================" + +echo "bind devices"; +src/usbip bind -b $busid; +echo "==============================================================" + +echo "List imported devices - expect to see exported devices"; +src/usbip list -r localhost; +echo "==============================================================" + +echo "List imported devices - expect to see none"; +src/usbip port; +echo "==============================================================" + +echo "Import devices from localhost - should work" +src/usbip attach -r localhost -b $busid; +echo "==============================================================" + +echo "List imported devices - expect to see imported devices"; +src/usbip port; +echo "==============================================================" + +echo "Import devices from localhost - expect already imported messages" +src/usbip attach -r localhost -b $busid; +echo "==============================================================" + +echo "Un-import devices"; +src/usbip detach -p 00; +src/usbip detach -p 01; +echo "==============================================================" + +echo "List imported devices - expect to see none"; +src/usbip port; +echo "==============================================================" + +echo "Un-import devices - expect no devices to detach messages"; +src/usbip detach -p 00; +src/usbip detach -p 01; +echo "==============================================================" + +echo "Detach invalid port tests - expect invalid port error message"; +src/usbip detach -p 100; +echo "==============================================================" + +echo "Expect to see export-able devices"; +src/usbip list -l; +echo "==============================================================" + +echo "Remove usbip_host module"; +rmmod usbip_host; + +echo "Run lsusb - bound devices should be rebound to original drivers" +lsusb -t; +echo "==============================================================" + +echo "Run bind without usbip_host - expect fail" +src/usbip bind -b $busid; +echo "==============================================================" + +echo "Run lsusb - devices that failed to bind aren't bound to any driver" +lsusb -t; +echo "==============================================================" + +echo "modprobe usbip_host - does it work?" +/sbin/modprobe usbip_host +echo "Should see -busid- is not in match_busid table... skip! dmesg" +echo "==============================================================" +dmesg | grep "is not in match_busid table" +echo "==============================================================" + +echo $test_end_msg diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c index c9c81614a66a..4204359c9fee 100644 --- a/tools/usb/usbip/libsrc/vhci_driver.c +++ b/tools/usb/usbip/libsrc/vhci_driver.c @@ -135,11 +135,11 @@ static int refresh_imported_device_list(void) return 0; } -static int get_nports(void) +static int get_nports(struct udev_device *hc_device) { const char *attr_nports; - attr_nports = udev_device_get_sysattr_value(vhci_driver->hc_device, "nports"); + attr_nports = udev_device_get_sysattr_value(hc_device, "nports"); if (!attr_nports) { err("udev_device_get_sysattr_value nports failed"); return -1; @@ -242,35 +242,41 @@ static int read_record(int rhport, char *host, unsigned long host_len, int usbip_vhci_driver_open(void) { + int nports; + struct udev_device *hc_device; + udev_context = udev_new(); if (!udev_context) { err("udev_new failed"); return -1; } - vhci_driver = calloc(1, sizeof(struct usbip_vhci_driver)); - /* will be freed in usbip_driver_close() */ - vhci_driver->hc_device = + hc_device = udev_device_new_from_subsystem_sysname(udev_context, USBIP_VHCI_BUS_TYPE, USBIP_VHCI_DEVICE_NAME); - if (!vhci_driver->hc_device) { + if (!hc_device) { err("udev_device_new_from_subsystem_sysname failed"); goto err; } - vhci_driver->nports = get_nports(); - dbg("available ports: %d", vhci_driver->nports); - - if (vhci_driver->nports <= 0) { + nports = get_nports(hc_device); + if (nports <= 0) { err("no available ports"); goto err; - } else if (vhci_driver->nports > MAXNPORT) { - err("port number exceeds %d", MAXNPORT); + } + dbg("available ports: %d", nports); + + vhci_driver = calloc(1, sizeof(struct usbip_vhci_driver) + + nports * sizeof(struct usbip_imported_device)); + if (!vhci_driver) { + err("vhci_driver allocation failed"); goto err; } + vhci_driver->nports = nports; + vhci_driver->hc_device = hc_device; vhci_driver->ncontrollers = get_ncontrollers(); dbg("available controllers: %d", vhci_driver->ncontrollers); @@ -285,7 +291,7 @@ int usbip_vhci_driver_open(void) return 0; err: - udev_device_unref(vhci_driver->hc_device); + udev_device_unref(hc_device); if (vhci_driver) free(vhci_driver); diff --git a/tools/usb/usbip/libsrc/vhci_driver.h b/tools/usb/usbip/libsrc/vhci_driver.h index 418b404d5121..6c9aca216705 100644 --- a/tools/usb/usbip/libsrc/vhci_driver.h +++ b/tools/usb/usbip/libsrc/vhci_driver.h @@ -13,7 +13,6 @@ #define USBIP_VHCI_BUS_TYPE "platform" #define USBIP_VHCI_DEVICE_NAME "vhci_hcd.0" -#define MAXNPORT 128 enum hub_speed { HUB_SPEED_HIGH = 0, @@ -41,7 +40,7 @@ struct usbip_vhci_driver { int ncontrollers; int nports; - struct usbip_imported_device idev[MAXNPORT]; + struct usbip_imported_device idev[]; }; diff --git a/tools/usb/usbip/src/usbip_detach.c b/tools/usb/usbip/src/usbip_detach.c index 9db9d21bb2ec..777f7286a0c5 100644 --- a/tools/usb/usbip/src/usbip_detach.c +++ b/tools/usb/usbip/src/usbip_detach.c @@ -43,9 +43,12 @@ void usbip_detach_usage(void) static int detach_port(char *port) { - int ret; + int ret = 0; uint8_t portnum; char path[PATH_MAX+1]; + int i; + struct usbip_imported_device *idev; + int found = 0; unsigned int port_len = strlen(port); @@ -55,27 +58,48 @@ static int detach_port(char *port) return -1; } - /* check max port */ - portnum = atoi(port); - /* remove the port state file */ + ret = usbip_vhci_driver_open(); + if (ret < 0) { + err("open vhci_driver"); + return -1; + } + + /* check for invalid port */ + for (i = 0; i < vhci_driver->nports; i++) { + idev = &vhci_driver->idev[i]; + + if (idev->port == portnum) { + found = 1; + if (idev->status != VDEV_ST_NULL) + break; + info("Port %d is already detached!\n", idev->port); + goto call_driver_close; + } + } + if (!found) { + err("Invalid port %s > maxports %d", + port, vhci_driver->nports); + goto call_driver_close; + } + + /* remove the port state file */ snprintf(path, PATH_MAX, VHCI_STATE_PATH"/port%d", portnum); remove(path); rmdir(VHCI_STATE_PATH); - ret = usbip_vhci_driver_open(); + ret = usbip_vhci_detach_device(portnum); if (ret < 0) { - err("open vhci_driver"); - return -1; + ret = -1; + err("Port %d detach request failed!\n", portnum); + goto call_driver_close; } + info("Port %d is now detached!\n", portnum); - ret = usbip_vhci_detach_device(portnum); - if (ret < 0) - return -1; - +call_driver_close: usbip_vhci_driver_close(); return ret; |