diff options
| -rw-r--r-- | arch/arm/mach-davinci/board-dm644x-evm.c | 12 | ||||
| -rw-r--r-- | drivers/usb/musb/davinci.c | 57 |
2 files changed, 45 insertions, 24 deletions
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 9d87d4e440ea..040c949414fa 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -823,6 +823,17 @@ static int davinci_phy_fixup(struct phy_device *phydev) #define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) +#define GPIO_nVBUS_DRV 160 + +static struct gpiod_lookup_table dm644evm_usb_gpio_table = { + .dev_id = "musb-davinci", + .table = { + GPIO_LOOKUP("davinci_gpio", GPIO_nVBUS_DRV, NULL, + GPIO_ACTIVE_HIGH), + { } + }, +}; + static __init void davinci_evm_init(void) { int ret; @@ -875,6 +886,7 @@ static __init void davinci_evm_init(void) dm644x_init_asp(); /* irlml6401 switches over 1A, in under 8 msec */ + gpiod_add_lookup_table(&dm644evm_usb_gpio_table); davinci_setup_usb(1000, 8); if (IS_BUILTIN(CONFIG_PHYLIB)) { diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index fb6bbd254ab7..704435526394 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -13,7 +13,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/usb_phy_generic.h> @@ -25,10 +25,6 @@ #include "musb_core.h" -#ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 160 -#endif - #include "davinci.h" #include "cppi_dma.h" @@ -40,6 +36,9 @@ struct davinci_glue { struct device *dev; struct platform_device *musb; struct clk *clk; + bool vbus_state; + struct gpio_desc *vbus; + struct work_struct vbus_work; }; /* REVISIT (PM) we should be able to keep the PHY in low power mode most @@ -135,43 +134,44 @@ static void davinci_musb_disable(struct musb *musb) * when J10 is out, and TI documents it as handling OTG. */ -#ifdef CONFIG_MACH_DAVINCI_EVM - -static int vbus_state = -1; - /* I2C operations are always synchronous, and require a task context. * With unloaded systems, using the shared workqueue seems to suffice * to satisfy the 100msec A_WAIT_VRISE timeout... */ -static void evm_deferred_drvvbus(struct work_struct *ignored) +static void evm_deferred_drvvbus(struct work_struct *work) { - gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); - vbus_state = !vbus_state; -} + struct davinci_glue *glue = container_of(work, struct davinci_glue, + vbus_work); -#endif /* EVM */ + gpiod_set_value_cansleep(glue->vbus, glue->vbus_state); + glue->vbus_state = !glue->vbus_state; +} -static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate) +static void davinci_musb_source_power(struct musb *musb, int is_on, + int immediate) { -#ifdef CONFIG_MACH_DAVINCI_EVM + struct davinci_glue *glue = dev_get_drvdata(musb->controller->parent); + + /* This GPIO handling is entirely optional */ + if (!glue->vbus) + return; + if (is_on) is_on = 1; - if (vbus_state == is_on) + if (glue->vbus_state == is_on) return; - vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */ + /* 0/1 vs "-1 == unknown/init" */ + glue->vbus_state = !is_on; if (machine_is_davinci_evm()) { - static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); - if (immediate) - gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); + gpiod_set_value_cansleep(glue->vbus, glue->vbus_state); else - schedule_work(&evm_vbus_work); + schedule_work(&glue->vbus_work); } if (immediate) - vbus_state = is_on; -#endif + glue->vbus_state = is_on; } static void davinci_musb_set_vbus(struct musb *musb, int is_on) @@ -524,6 +524,15 @@ static int davinci_probe(struct platform_device *pdev) pdata->platform_ops = &davinci_ops; + glue->vbus = devm_gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW); + if (IS_ERR(glue->vbus)) { + ret = PTR_ERR(glue->vbus); + goto err0; + } else { + glue->vbus_state = -1; + INIT_WORK(&glue->vbus_work, evm_deferred_drvvbus); + } + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); |