diff options
150 files changed, 7007 insertions, 1273 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2 index 3371c39f651d..a2bf4fd82a5b 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uac2 +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2 @@ -35,4 +35,6 @@ Description: req_number the number of pre-allocated requests for both capture and playback function_name name of the interface + c_terminal_type code of the capture terminal type + p_terminal_type code of the playback terminal type ===================== ======================================= diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index a44bfe020061..2b7108e21977 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -313,6 +313,15 @@ Description: Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per direction. Devices before USB 3.2 are single lane (tx_lanes = 1) +What: /sys/bus/usb/devices/.../typec +Date: November 2023 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Symlink to the USB Type-C partner device. USB Type-C partner + represents the component that communicates over the + Configuration Channel (CC signal on USB Type-C connectors and + cables) with the local port. + What: /sys/bus/usb/devices/usbX/bAlternateSetting Description: The current interface alternate setting number, in decimal. diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery index 1bf9d1d7902c..61d233c320ea 100644 --- a/Documentation/ABI/testing/sysfs-class-usb_power_delivery +++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery @@ -124,6 +124,13 @@ Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: The voltage the supply supports in millivolts. +What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/peak_current +Date: October 2023 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file shows the value of the Fixed Power Source Peak Current + Capability field. + What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current Date: May 2022 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index f99fbbcd68fb..d58dd744d5d2 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -20,6 +20,7 @@ properties: - qcom,qcm2290-qmp-usb3-phy - qcom,sa8775p-qmp-usb3-uni-phy - qcom,sc8280xp-qmp-usb3-uni-phy + - qcom,sdx75-qmp-usb3-uni-phy - qcom,sm6115-qmp-usb3-phy reg: @@ -75,6 +76,7 @@ allOf: contains: enum: - qcom,ipq9574-qmp-usb3-phy + - qcom,sdx75-qmp-usb3-uni-phy then: properties: clock-names: diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml index c53bab107b6d..c95828607ab6 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml @@ -14,7 +14,12 @@ description: properties: compatible: - const: qcom,sm8550-snps-eusb2-phy + oneOf: + - items: + - enum: + - qcom,sdx75-snps-eusb2-phy + - const: qcom,sm8550-snps-eusb2-phy + - const: qcom,sm8550-snps-eusb2-phy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index bceb479f74c5..422921cf1f82 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -35,6 +35,12 @@ properties: '#size-cells': const: 0 + orientation-gpios: + description: Array of input gpios for the Type-C connector orientation indication. + The GPIO indication is used to detect the orientation of the Type-C connector. + The array should contain a gpio entry for each PMIC Glink connector, in reg order. + It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation. + patternProperties: '^connector@\d$': $ref: /schemas/connector/usb-connector.yaml# @@ -44,6 +50,19 @@ patternProperties: required: - compatible +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink + then: + properties: + orientation-gpios: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index 1394557517b1..b7e664f7395b 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -15,7 +15,9 @@ properties: oneOf: - enum: - chipidea,usb2 + - fsl,imx27-usb - lsi,zevio-usb + - nuvoton,npcm750-udc - nvidia,tegra20-ehci - nvidia,tegra20-udc - nvidia,tegra30-ehci @@ -66,6 +68,10 @@ properties: - items: - const: xlnx,zynq-usb-2.20a - const: chipidea,usb2 + - items: + - enum: + - nuvoton,npcm845-udc + - const: nuvoton,npcm750-udc reg: minItems: 1 @@ -388,6 +394,7 @@ allOf: enum: - chipidea,usb2 - lsi,zevio-usb + - nuvoton,npcm750-udc - nvidia,tegra20-udc - nvidia,tegra30-udc - nvidia,tegra114-udc diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index f6e7a5c1ff0b..f9410eb76a62 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -11,8 +11,12 @@ maintainers: properties: compatible: - enum: - - fcs,fsa4480 + oneOf: + - const: fcs,fsa4480 + - items: + - enum: + - ocs,ocp96011 + - const: fcs,fsa4480 reg: maxItems: 1 @@ -32,10 +36,43 @@ properties: type: boolean port: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: A port node to link the FSA4480 to a TypeC controller for the purpose of handling altmode muxing and orientation switching. + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Specifies how the AUX+/- lines are connected to SBU1/2. + oneOf: + - items: + - const: 0 + - const: 1 + description: | + Default AUX/SBU layout (FSA4480) + - AUX+ connected to SBU2 + - AUX- connected to SBU1 + Default AUX/SBU layout (OCP96011) + - AUX+ connected to SBU1 + - AUX- connected to SBU2 + - items: + - const: 1 + - const: 0 + description: | + Swapped AUX/SBU layout (FSA4480) + - AUX+ connected to SBU1 + - AUX- connected to SBU2 + Swapped AUX/SBU layout (OCP96011) + - AUX+ connected to SBU2 + - AUX- connected to SBU1 required: - compatible diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index d0927f6768a4..ee08b9c3721f 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Genesys Logic GL850G USB 2.0 hub controller +title: Genesys Logic USB hub controller maintainers: - Icenowy Zheng <uwu@icenowy.me> @@ -18,6 +18,7 @@ properties: - usb5e3,608 - usb5e3,610 - usb5e3,620 + - usb5e3,626 reg: true diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index f196beb826d8..d3b2b666ec2a 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -19,6 +19,7 @@ properties: compatible: items: - enum: + - nxp,cbdtu02043 - onnn,fsusb43l10x - pericom,pi3usb102 - const: gpio-sbu-mux @@ -50,7 +51,6 @@ required: - compatible - enable-gpios - select-gpios - - mode-switch - orientation-switch - port diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml new file mode 100644 index 000000000000..eee548ac1abe --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/nxp,ptn36502.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN36502 Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +properties: + compatible: + enum: + - nxp,ptn36502 + + reg: + maxItems: 1 + + vdd18-supply: + description: Power supply for VDD18 pin + + retimer-switch: + description: Flag the port as possible handle of SuperSpeed signals retiming + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Super Speed (SS) Input endpoint from the Super-Speed PHY + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@1a { + compatible = "nxp,ptn36502"; + reg = <0x1a>; + + vdd18-supply = <&usb_redrive_1v8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + port@1 { + reg = <1>; + phy_con_ss: endpoint { + remote-endpoint = <&usb_phy_ss>; + }; + }; + port@2 { + reg = <2>; + usb_con_sbu: endpoint { + remote-endpoint = <&typec_dp_aux>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 67591057f234..e889158ca205 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - qcom,ipq4019-dwc3 + - qcom,ipq5018-dwc3 - qcom,ipq5332-dwc3 - qcom,ipq6018-dwc3 - qcom,ipq8064-dwc3 @@ -34,6 +35,7 @@ properties: - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 - qcom,sm4250-dwc3 - qcom,sm6115-dwc3 - qcom,sm6125-dwc3 @@ -180,6 +182,8 @@ allOf: - qcom,sdm670-dwc3 - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 + - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 - qcom,sm6350-dwc3 then: properties: @@ -238,6 +242,7 @@ allOf: compatible: contains: enum: + - qcom,ipq5018-dwc3 - qcom,ipq5332-dwc3 - qcom,msm8994-dwc3 - qcom,qcs404-dwc3 @@ -363,6 +368,7 @@ allOf: - qcom,sdm845-dwc3 - qcom,sdx55-dwc3 - qcom,sdx65-dwc3 + - qcom,sdx75-dwc3 - qcom,sm4250-dwc3 - qcom,sm6125-dwc3 - qcom,sm6350-dwc3 @@ -411,6 +417,7 @@ allOf: compatible: contains: enum: + - qcom,ipq5018-dwc3 - qcom,ipq5332-dwc3 - qcom,sdm660-dwc3 then: diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml new file mode 100644 index 000000000000..345d0132d4a5 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/realtek,rtd-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DWC3 USB SoC Controller Glue + +maintainers: + - Stanley Chang <stanley_chang@realtek.com> + +description: + The Realtek DHC SoC embeds a DWC3 USB IP Core configured for USB 2.0 + and USB 3.0 in host or dual-role mode. + +properties: + compatible: + items: + - enum: + - realtek,rtd1295-dwc3 + - realtek,rtd1315e-dwc3 + - realtek,rtd1319-dwc3 + - realtek,rtd1319d-dwc3 + - realtek,rtd1395-dwc3 + - realtek,rtd1619-dwc3 + - realtek,rtd1619b-dwc3 + - const: realtek,rtd-dwc3 + + reg: + items: + - description: Address and length of register set for wrapper of dwc3 core. + - description: Address and length of register set for pm control. + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + description: Required child node + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + usb@98013e00 { + compatible = "realtek,rtd1319d-dwc3", "realtek,rtd-dwc3"; + reg = <0x98013e00 0x140>, <0x98013f60 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb@98050000 { + compatible = "snps,dwc3"; + reg = <0x98050000 0x9000>; + interrupts = <0 94 4>; + phys = <&usb2phy &usb3phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "host"; + snps,dis_u2_susphy_quirk; + snps,parkmode-disable-ss-quirk; + snps,parkmode-disable-hs-quirk; + maximum-speed = "high-speed"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml index c983dfe0f629..c4924113f9bd 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml @@ -20,9 +20,6 @@ description: Type-C PHY Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt -allOf: - - $ref: snps,dwc3.yaml# - select: properties: compatible: @@ -30,6 +27,7 @@ select: enum: - rockchip,rk3328-dwc3 - rockchip,rk3568-dwc3 + - rockchip,rk3588-dwc3 required: - compatible @@ -39,6 +37,7 @@ properties: - enum: - rockchip,rk3328-dwc3 - rockchip,rk3568-dwc3 + - rockchip,rk3588-dwc3 - const: snps,dwc3 reg: @@ -58,7 +57,9 @@ properties: Master/Core clock, must to be >= 62.5 MHz for SS operation and >= 30MHz for HS operation - description: - Controller grf clock + Controller grf clock OR UTMI clock + - description: + PIPE clock clock-names: minItems: 3 @@ -66,7 +67,10 @@ properties: - const: ref_clk - const: suspend_clk - const: bus_clk - - const: grf_clk + - enum: + - grf_clk + - utmi + - const: pipe power-domains: maxItems: 1 @@ -86,6 +90,52 @@ required: - clocks - clock-names +allOf: + - $ref: snps,dwc3.yaml# + - if: + properties: + compatible: + contains: + const: rockchip,rk3328-dwc3 + then: + properties: + clocks: + minItems: 3 + maxItems: 4 + clock-names: + minItems: 3 + items: + - const: ref_clk + - const: suspend_clk + - const: bus_clk + - const: grf_clk + - if: + properties: + compatible: + contains: + const: rockchip,rk3568-dwc3 + then: + properties: + clocks: + maxItems: 3 + clock-names: + maxItems: 3 + - if: + properties: + compatible: + contains: + const: rockchip,rk3588-dwc3 + then: + properties: + clock-names: + minItems: 3 + items: + - const: ref_clk + - const: suspend_clk + - const: bus_clk + - const: utmi + - const: pipe + examples: - | #include <dt-bindings/clock/rk3328-cru.h> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index a696f23730d3..ee5af4b381b1 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -310,6 +310,62 @@ properties: maximum: 62 deprecated: true + snps,rx-thr-num-pkt: + description: + USB RX packet threshold count. In host mode, this field specifies + the space that must be available in the RX FIFO before the core can + start the corresponding USB RX transaction (burst). + In device mode, this field specifies the space that must be + available in the RX FIFO before the core can send ERDY for a + flow-controlled endpoint. It is only used for SuperSpeed. + The valid values for this field are from 1 to 15. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,rx-max-burst: + description: + Max USB RX burst size. In host mode, this field specifies the + Maximum Bulk IN burst the DWC_usb3 core can perform. When the system + bus is slower than the USB, RX FIFO can overrun during a long burst. + You can program a smaller value to this field to limit the RX burst + size that the core can perform. It only applies to SS Bulk, + Isochronous, and Interrupt IN endpoints in the host mode. + In device mode, this field specifies the NUMP value that is sent in + ERDY for an OUT endpoint. + The valid values for this field are from 1 to 16. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt: + description: + USB TX packet threshold count. This field specifies the number of + packets that must be in the TXFIFO before the core can start + transmission for the corresponding USB transaction (burst). + This count is valid in both host and device modes. It is only used + for SuperSpeed operation. + Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,tx-max-burst: + description: + Max USB TX burst size. When the system bus is slower than the USB, + TX FIFO can underrun during a long burst. Program a smaller value + to this field to limit the TX burst size that the core can execute. + In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt + OUT endpoints. This value is not used in device mode. + Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + snps,rx-thr-num-pkt-prd: description: Periodic ESS RX packet threshold count (host mode only). Set this and diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 6ab674dea4c6..323d664ae06a 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -20,8 +20,23 @@ properties: enum: - ti,tps6598x - apple,cd321x + - ti,tps25750 + reg: - maxItems: 1 + minItems: 1 + items: + - description: main PD controller address + - description: | + I2C slave address field in PBMs input data + which is used as the device address when writing the + patch for TPS25750. + The patch address can be any value except 0x00, 0x20, + 0x21, 0x22, and 0x23 + + reg-names: + items: + - const: main + - const: patch-address wakeup-source: true @@ -35,10 +50,42 @@ properties: connector: $ref: /schemas/connector/usb-connector.yaml# + firmware-name: + description: | + Should contain the name of the default patch binary + file located on the firmware search path which is + used to switch the controller into APP mode. + This is used when tps25750 doesn't have an EEPROM + connected to it. + maxItems: 1 + required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + const: ti,tps25750 + then: + properties: + reg: + maxItems: 2 + + connector: + required: + - data-role + + required: + - connector + - reg-names + else: + properties: + reg: + maxItems: 1 + additionalProperties: false examples: @@ -71,4 +118,36 @@ examples: }; }; }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec@21 { + compatible = "ti,tps25750"; + reg = <0x21>, <0x0f>; + reg-names = "main", "patch-address"; + + interrupt-parent = <&msmgpio>; + interrupts = <100 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + firmware-name = "tps25750.bin"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_pins>; + + typec_con0: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + port { + typec_ep0: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml index 76db9071b352..c815010ba9c2 100644 --- a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml +++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml @@ -37,7 +37,6 @@ properties: required: - compatible - reg - - reset-gpios - vdd-supply - peer-hub diff --git a/Documentation/driver-api/usb/dma.rst b/Documentation/driver-api/usb/dma.rst index d32c27e11b90..02f6825ff830 100644 --- a/Documentation/driver-api/usb/dma.rst +++ b/Documentation/driver-api/usb/dma.rst @@ -93,44 +93,18 @@ DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section of Documentation/core-api/dma-api-howto.rst, titled "What memory is DMA-able?") -- When you're using scatterlists, you can map everything at once. On some - systems, this kicks in an IOMMU and turns the scatterlists into single - DMA transactions:: +- When you have the scatterlists which have been mapped for the USB controller, + you could use the new ``usb_sg_*()`` calls, which would turn scatterlist + into URBs:: - int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int nents); + int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev, + unsigned pipe, unsigned period, struct scatterlist *sg, + int nents, size_t length, gfp_t mem_flags); - void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int n_hw_ents); + void usb_sg_wait(struct usb_sg_request *io); - void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe, - struct scatterlist *sg, int n_hw_ents); + void usb_sg_cancel(struct usb_sg_request *io); - It's probably easier to use the new ``usb_sg_*()`` calls, which do the DMA - mapping and apply other tweaks to make scatterlist i/o be fast. - -- Some drivers may prefer to work with the model that they're mapping large - buffers, synchronizing their safe re-use. (If there's no re-use, then let - usbcore do the map/unmap.) Large periodic transfers make good examples - here, since it's cheaper to just synchronize the buffer than to unmap it - each time an urb completes and then re-map it on during resubmission. - - These calls all work with initialized urbs: ``urb->dev``, ``urb->pipe``, - ``urb->transfer_buffer``, and ``urb->transfer_buffer_length`` must all be - valid when these calls are used (``urb->setup_packet`` must be valid too - if urb is a control request):: - - struct urb *usb_buffer_map (struct urb *urb); - - void usb_buffer_dmasync (struct urb *urb); - - void usb_buffer_unmap (struct urb *urb); - - The calls manage ``urb->transfer_dma`` for you, and set - ``URB_NO_TRANSFER_DMA_MAP`` so that usbcore won't map or unmap the buffer. - They cannot be used for setup_packet buffers in control requests. - -Note that several of those interfaces are currently commented out, since -they don't have current users. See the source code. Other than the dmasync -calls (where the underlying DMA primitives have changed), most of them can -easily be commented back in if you want to use them. + When the USB controller doesn't support DMA, the ``usb_sg_init()`` would try + to submit URBs in PIO way as long as the page in scatterlists is not in the + Highmem, which could be very rare in modern architectures. diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst index 394cd226bfae..29072c166d23 100644 --- a/Documentation/usb/gadget-testing.rst +++ b/Documentation/usb/gadget-testing.rst @@ -755,6 +755,8 @@ The uac2 function provides these attributes in its function directory: req_number the number of pre-allocated request for both capture and playback function_name name of the interface + c_terminal_type code of the capture terminal type + p_terminal_type code of the playback terminal type ================ ==================================================== The attributes have sane default values. diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 5b3488736fbe..9a70875028b7 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -59,6 +59,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 320662024e89..eef811def39b 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -77,6 +77,7 @@ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 2993e1255042..7064c0e9179f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -443,6 +443,27 @@ status = "disabled"; }; + usb_host2_xhci: usb@fcd00000 { + compatible = "rockchip,rk3588-dwc3", "snps,dwc3"; + reg = <0x0 0xfcd00000 0x0 0x400000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>, + <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>, + <&cru CLK_PIPEPHY2_PIPE_U3_G>; + clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe"; + dr_mode = "host"; + phys = <&combphy2_psu PHY_TYPE_USB3>; + phy-names = "usb3-phy"; + phy_type = "utmi_wide"; + resets = <&cru SRST_A_USB3OTG2>; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + snps,dis_rxdet_inp3_quirk; + status = "disabled"; + }; + pmu1grf: syscon@fd58a000 { compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xfd58a000 0x0 0x10000>; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 913948876c93..b3a133ed31ee 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1312,9 +1312,9 @@ config GPIO_KEMPLD config GPIO_LJCA tristate "INTEL La Jolla Cove Adapter GPIO support" - depends on MFD_LJCA + depends on USB_LJCA select GPIOLIB_IRQCHIP - default MFD_LJCA + default USB_LJCA help Select this option to enable GPIO driver for the INTEL La Jolla Cove Adapter (LJCA) board. diff --git a/drivers/gpio/gpio-ljca.c b/drivers/gpio/gpio-ljca.c index aca69329455f..dfec9fbfc7a9 100644 --- a/drivers/gpio/gpio-ljca.c +++ b/drivers/gpio/gpio-ljca.c @@ -6,6 +6,7 @@ */ #include <linux/acpi.h> +#include <linux/auxiliary_bus.h> #include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/dev_printk.h> @@ -13,19 +14,18 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/kref.h> -#include <linux/mfd/ljca.h> #include <linux/module.h> -#include <linux/platform_device.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/usb/ljca.h> /* GPIO commands */ -#define LJCA_GPIO_CONFIG 1 -#define LJCA_GPIO_READ 2 -#define LJCA_GPIO_WRITE 3 -#define LJCA_GPIO_INT_EVENT 4 -#define LJCA_GPIO_INT_MASK 5 -#define LJCA_GPIO_INT_UNMASK 6 +#define LJCA_GPIO_CONFIG 1 +#define LJCA_GPIO_READ 2 +#define LJCA_GPIO_WRITE 3 +#define LJCA_GPIO_INT_EVENT 4 +#define LJCA_GPIO_INT_MASK 5 +#define LJCA_GPIO_INT_UNMASK 6 #define LJCA_GPIO_CONF_DISABLE BIT(0) #define LJCA_GPIO_CONF_INPUT BIT(1) @@ -36,45 +36,49 @@ #define LJCA_GPIO_CONF_INTERRUPT BIT(6) #define LJCA_GPIO_INT_TYPE BIT(7) -#define LJCA_GPIO_CONF_EDGE FIELD_PREP(LJCA_GPIO_INT_TYPE, 1) -#define LJCA_GPIO_CONF_LEVEL FIELD_PREP(LJCA_GPIO_INT_TYPE, 0) +#define LJCA_GPIO_CONF_EDGE FIELD_PREP(LJCA_GPIO_INT_TYPE, 1) +#define LJCA_GPIO_CONF_LEVEL FIELD_PREP(LJCA_GPIO_INT_TYPE, 0) /* Intentional overlap with PULLUP / PULLDOWN */ -#define LJCA_GPIO_CONF_SET BIT(3) -#define LJCA_GPIO_CONF_CLR BIT(4) +#define LJCA_GPIO_CONF_SET BIT(3) +#define LJCA_GPIO_CONF_CLR BIT(4) -struct gpio_op { +#define LJCA_GPIO_BUF_SIZE 60u + +struct ljca_gpio_op { u8 index; u8 value; } __packed; -struct gpio_packet { +struct ljca_gpio_packet { u8 num; - struct gpio_op item[]; + struct ljca_gpio_op item[] __counted_by(num); } __packed; -#define LJCA_GPIO_BUF_SIZE 60 struct ljca_gpio_dev { - struct platform_device *pdev; + struct ljca_client *ljca; struct gpio_chip gc; struct ljca_gpio_info *gpio_info; DECLARE_BITMAP(unmasked_irqs, LJCA_MAX_GPIO_NUM); DECLARE_BITMAP(enabled_irqs, LJCA_MAX_GPIO_NUM); DECLARE_BITMAP(reenable_irqs, LJCA_MAX_GPIO_NUM); + DECLARE_BITMAP(output_enabled, LJCA_MAX_GPIO_NUM); u8 *connect_mode; - /* mutex to protect irq bus */ + /* protect irq bus */ struct mutex irq_lock; struct work_struct work; - /* lock to protect package transfer to Hardware */ + /* protect package transfer to hardware */ struct mutex trans_lock; u8 obuf[LJCA_GPIO_BUF_SIZE]; u8 ibuf[LJCA_GPIO_BUF_SIZE]; }; -static int gpio_config(struct ljca_gpio_dev *ljca_gpio, u8 gpio_id, u8 config) +static int ljca_gpio_config(struct ljca_gpio_dev *ljca_gpio, u8 gpio_id, + u8 config) { - struct gpio_packet *packet = (struct gpio_packet *)ljca_gpio->obuf; + struct ljca_gpio_packet *packet = + (struct ljca_gpio_packet *)ljca_gpio->obuf; int ret; mutex_lock(&ljca_gpio->trans_lock); @@ -82,43 +86,43 @@ static int gpio_config(struct ljca_gpio_dev *ljca_gpio, u8 gpio_id, u8 config) packet->item[0].value = config | ljca_gpio->connect_mode[gpio_id]; packet->num = 1; - ret = ljca_transfer(ljca_gpio->gpio_info->ljca, LJCA_GPIO_CONFIG, packet, - struct_size(packet, item, packet->num), NULL, NULL); + ret = ljca_transfer(ljca_gpio->ljca, LJCA_GPIO_CONFIG, (u8 *)packet, + struct_size(packet, item, packet->num), NULL, 0); mutex_unlock(&ljca_gpio->trans_lock); - return ret; + + return ret < 0 ? ret : 0; } static int ljca_gpio_read(struct ljca_gpio_dev *ljca_gpio, u8 gpio_id) { - struct gpio_packet *packet = (struct gpio_packet *)ljca_gpio->obuf; - struct gpio_packet *ack_packet = (struct gpio_packet *)ljca_gpio->ibuf; - unsigned int ibuf_len = LJCA_GPIO_BUF_SIZE; + struct ljca_gpio_packet *ack_packet = + (struct ljca_gpio_packet *)ljca_gpio->ibuf; + struct ljca_gpio_packet *packet = + (struct ljca_gpio_packet *)ljca_gpio->obuf; int ret; mutex_lock(&ljca_gpio->trans_lock); packet->num = 1; packet->item[0].index = gpio_id; - ret = ljca_transfer(ljca_gpio->gpio_info->ljca, LJCA_GPIO_READ, packet, - struct_size(packet, item, packet->num), ljca_gpio->ibuf, &ibuf_len); - if (ret) - goto out_unlock; - - if (!ibuf_len || ack_packet->num != packet->num) { - dev_err(&ljca_gpio->pdev->dev, "failed gpio_id:%u %u", gpio_id, ack_packet->num); - ret = -EIO; + ret = ljca_transfer(ljca_gpio->ljca, LJCA_GPIO_READ, (u8 *)packet, + struct_size(packet, item, packet->num), + ljca_gpio->ibuf, LJCA_GPIO_BUF_SIZE); + + if (ret <= 0 || ack_packet->num != packet->num) { + dev_err(&ljca_gpio->ljca->auxdev.dev, + "read package error, gpio_id: %u num: %u ret: %d\n", + gpio_id, ack_packet->num, ret); + ret = ret < 0 ? ret : -EIO; } - -out_unlock: mutex_unlock(&ljca_gpio->trans_lock); - if (ret) - return ret; - return ack_packet->item[0].value > 0; + + return ret < 0 ? ret : ack_packet->item[0].value > 0; } -static int ljca_gpio_write(struct ljca_gpio_dev *ljca_gpio, u8 gpio_id, - int value) +static int ljca_gpio_write(struct ljca_gpio_dev *ljca_gpio, u8 gpio_id, int value) { - struct gpio_packet *packet = (struct gpio_packet *)ljca_gpio->obuf; + struct ljca_gpio_packet *packet = + (struct ljca_gpio_packet *)ljca_gpio->obuf; int ret; mutex_lock(&ljca_gpio->trans_lock); @@ -126,10 +130,11 @@ static int ljca_gpio_write(struct ljca_gpio_dev *ljca_gpio, u8 gpio_id, packet->item[0].index = gpio_id; packet->item[0].value = value & 1; - ret = ljca_transfer(ljca_gpio->gpio_info->ljca, LJCA_GPIO_WRITE, packet, - struct_size(packet, item, packet->num), NULL, NULL); + ret = ljca_transfer(ljca_gpio->ljca, LJCA_GPIO_WRITE, (u8 *)packet, + struct_size(packet, item, packet->num), NULL, 0); mutex_unlock(&ljca_gpio->trans_lock); - return ret; + + return ret < 0 ? ret : 0; } static int ljca_gpio_get_value(struct gpio_chip *chip, unsigned int offset) @@ -147,16 +152,24 @@ static void ljca_gpio_set_value(struct gpio_chip *chip, unsigned int offset, ret = ljca_gpio_write(ljca_gpio, offset, val); if (ret) - dev_err(chip->parent, "offset:%u val:%d set value failed %d\n", offset, val, ret); + dev_err(chip->parent, + "set value failed offset: %u val: %d ret: %d\n", + offset, val, ret); } -static int ljca_gpio_direction_input(struct gpio_chip *chip, - unsigned int offset) +static int ljca_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) { struct ljca_gpio_dev *ljca_gpio = gpiochip_get_data(chip); u8 config = LJCA_GPIO_CONF_INPUT | LJCA_GPIO_CONF_CLR; + int ret; + + ret = ljca_gpio_config(ljca_gpio, offset, config); + if (ret) + return ret; - return gpio_config(ljca_gpio, offset, config); + clear_bit(offset, ljca_gpio->output_enabled); + + return 0; } static int ljca_gpio_direction_output(struct gpio_chip *chip, @@ -166,14 +179,26 @@ static int ljca_gpio_direction_output(struct gpio_chip *chip, u8 config = LJCA_GPIO_CONF_OUTPUT | LJCA_GPIO_CONF_CLR; int ret; - ret = gpio_config(ljca_gpio, offset, config); + ret = ljca_gpio_config(ljca_gpio, offset, config); if (ret) return ret; ljca_gpio_set_value(chip, offset, val); + set_bit(offset, ljca_gpio->output_enabled); + return 0; } +static int ljca_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct ljca_gpio_dev *ljca_gpio = gpiochip_get_data(chip); + + if (test_bit(offset, ljca_gpio->output_enabled)) + return GPIO_LINE_DIRECTION_OUT; + + return GPIO_LINE_DIRECTION_IN; +} + static int ljca_gpio_set_config(struct gpio_chip *chip, unsigned int offset, unsigned long config) { @@ -197,7 +222,8 @@ static int ljca_gpio_set_config(struct gpio_chip *chip, unsigned int offset, return 0; } -static int ljca_gpio_init_valid_mask(struct gpio_chip *chip, unsigned long *valid_mask, +static int ljca_gpio_init_valid_mask(struct gpio_chip *chip, + unsigned long *valid_mask, unsigned int ngpios) { struct ljca_gpio_dev *ljca_gpio = gpiochip_get_data(chip); @@ -208,15 +234,18 @@ static int ljca_gpio_init_valid_mask(struct gpio_chip *chip, unsigned long *vali return 0; } -static void ljca_gpio_irq_init_valid_mask(struct gpio_chip *chip, unsigned long *valid_mask, +static void ljca_gpio_irq_init_valid_mask(struct gpio_chip *chip, + unsigned long *valid_mask, unsigned int ngpios) { ljca_gpio_init_valid_mask(chip, valid_mask, ngpios); } -static int ljca_enable_irq(struct ljca_gpio_dev *ljca_gpio, int gpio_id, bool enable) +static int ljca_enable_irq(struct ljca_gpio_dev *ljca_gpio, int gpio_id, + bool enable) { - struct gpio_packet *packet = (struct gpio_packet *)ljca_gpio->obuf; + struct ljca_gpio_packet *packet = + (struct ljca_gpio_packet *)ljca_gpio->obuf; int ret; mutex_lock(&ljca_gpio->trans_lock); @@ -224,18 +253,20 @@ static int ljca_enable_irq(struct ljca_gpio_dev *ljca_gpio, int gpio_id, bool en packet->item[0].index = gpio_id; packet->item[0].value = 0; - ret = ljca_transfer(ljca_gpio->gpio_info->ljca, - enable ? LJCA_GPIO_INT_UNMASK : LJCA_GPIO_INT_MASK, packet, - struct_size(packet, item, packet->num), NULL, NULL); + ret = ljca_transfer(ljca_gpio->ljca, + enable ? LJCA_GPIO_INT_UNMASK : LJCA_GPIO_INT_MASK, + (u8 *)packet, struct_size(packet, item, packet->num), + NULL, 0); mutex_unlock(&ljca_gpio->trans_lock); - return ret; + + return ret < 0 ? ret : 0; } static void ljca_gpio_async(struct work_struct *work) { - struct ljca_gpio_dev *ljca_gpio = container_of(work, struct ljca_gpio_dev, work); - int gpio_id; - int unmasked; + struct ljca_gpio_dev *ljca_gpio = + container_of(work, struct ljca_gpio_dev, work); + int gpio_id, unmasked; for_each_set_bit(gpio_id, ljca_gpio->reenable_irqs, ljca_gpio->gc.ngpio) { clear_bit(gpio_id, ljca_gpio->reenable_irqs); @@ -245,20 +276,22 @@ static void ljca_gpio_async(struct work_struct *work) } } -static void ljca_gpio_event_cb(void *context, u8 cmd, const void *evt_data, int len) +static void ljca_gpio_event_cb(void *context, u8 cmd, const void *evt_data, + int len) { - const struct gpio_packet *packet = evt_data; + const struct ljca_gpio_packet *packet = evt_data; struct ljca_gpio_dev *ljca_gpio = context; - int i; - int irq; + int i, irq; if (cmd != LJCA_GPIO_INT_EVENT) return; for (i = 0; i < packet->num; i++) { - irq = irq_find_mapping(ljca_gpio->gc.irq.domain, packet->item[i].index); + irq = irq_find_mapping(ljca_gpio->gc.irq.domain, + packet->item[i].index); if (!irq) { - dev_err(ljca_gpio->gc.parent, "gpio_id %u does not mapped to IRQ yet\n", + dev_err(ljca_gpio->gc.parent, + "gpio_id %u does not mapped to IRQ yet\n", packet->item[i].index); return; } @@ -299,18 +332,22 @@ static int ljca_irq_set_type(struct irq_data *irqd, unsigned int type) ljca_gpio->connect_mode[gpio_id] = LJCA_GPIO_CONF_INTERRUPT; switch (type) { case IRQ_TYPE_LEVEL_HIGH: - ljca_gpio->connect_mode[gpio_id] |= (LJCA_GPIO_CONF_LEVEL | LJCA_GPIO_CONF_PULLUP); + ljca_gpio->connect_mode[gpio_id] |= + (LJCA_GPIO_CONF_LEVEL | LJCA_GPIO_CONF_PULLUP); break; case IRQ_TYPE_LEVEL_LOW: - ljca_gpio->connect_mode[gpio_id] |= (LJCA_GPIO_CONF_LEVEL | LJCA_GPIO_CONF_PULLDOWN); + ljca_gpio->connect_mode[gpio_id] |= + (LJCA_GPIO_CONF_LEVEL | LJCA_GPIO_CONF_PULLDOWN); break; case IRQ_TYPE_EDGE_BOTH: break; case IRQ_TYPE_EDGE_RISING: - ljca_gpio->connect_mode[gpio_id] |= (LJCA_GPIO_CONF_EDGE | LJCA_GPIO_CONF_PULLUP); + ljca_gpio->connect_mode[gpio_id] |= + (LJCA_GPIO_CONF_EDGE | LJCA_GPIO_CONF_PULLUP); break; case IRQ_TYPE_EDGE_FALLING: - ljca_gpio->connect_mode[gpio_id] |= (LJCA_GPIO_CONF_EDGE | LJCA_GPIO_CONF_PULLDOWN); + ljca_gpio->connect_mode[gpio_id] |= + (LJCA_GPIO_CONF_EDGE | LJCA_GPIO_CONF_PULLDOWN); break; default: return -EINVAL; @@ -332,15 +369,14 @@ static void ljca_irq_bus_unlock(struct irq_data *irqd) struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); struct ljca_gpio_dev *ljca_gpio = gpiochip_get_data(gc); int gpio_id = irqd_to_hwirq(irqd); - int enabled; - int unmasked; + int enabled, unmasked; enabled = test_bit(gpio_id, ljca_gpio->enabled_irqs); unmasked = test_bit(gpio_id, ljca_gpio->unmasked_irqs); if (enabled != unmasked) { if (unmasked) { - gpio_config(ljca_gpio, gpio_id, 0); + ljca_gpio_config(ljca_gpio, gpio_id, 0); ljca_enable_irq(ljca_gpio, gpio_id, true); set_bit(gpio_id, ljca_gpio->enabled_irqs); } else { @@ -363,43 +399,48 @@ static const struct irq_chip ljca_gpio_irqchip = { GPIOCHIP_IRQ_RESOURCE_HELPERS, }; -static int ljca_gpio_probe(struct platform_device *pdev) +static int ljca_gpio_probe(struct auxiliary_device *auxdev, + const struct auxiliary_device_id *aux_dev_id) { + struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev); struct ljca_gpio_dev *ljca_gpio; struct gpio_irq_chip *girq; int ret; - ljca_gpio = devm_kzalloc(&pdev->dev, sizeof(*ljca_gpio), GFP_KERNEL); + ljca_gpio = devm_kzalloc(&auxdev->dev, sizeof(*ljca_gpio), GFP_KERNEL); if (!ljca_gpio) return -ENOMEM; - ljca_gpio->gpio_info = dev_get_platdata(&pdev->dev); - ljca_gpio->connect_mode = devm_kcalloc(&pdev->dev, ljca_gpio->gpio_info->num, - sizeof(*ljca_gpio->connect_mode), GFP_KERNEL); + ljca_gpio->ljca = ljca; + ljca_gpio->gpio_info = dev_get_platdata(&auxdev->dev); + ljca_gpio->connect_mode = devm_kcalloc(&auxdev->dev, + ljca_gpio->gpio_info->num, + sizeof(*ljca_gpio->connect_mode), + GFP_KERNEL); if (!ljca_gpio->connect_mode) return -ENOMEM; mutex_init(&ljca_gpio->irq_lock); mutex_init(&ljca_gpio->trans_lock); - ljca_gpio->pdev = pdev; ljca_gpio->gc.direction_input = ljca_gpio_direction_input; ljca_gpio->gc.direction_output = ljca_gpio_direction_output; + ljca_gpio->gc.get_direction = ljca_gpio_get_direction; ljca_gpio->gc.get = ljca_gpio_get_value; ljca_gpio->gc.set = ljca_gpio_set_value; ljca_gpio->gc.set_config = ljca_gpio_set_config; ljca_gpio->gc.init_valid_mask = ljca_gpio_init_valid_mask; ljca_gpio->gc.can_sleep = true; - ljca_gpio->gc.parent = &pdev->dev; + ljca_gpio->gc.parent = &auxdev->dev; ljca_gpio->gc.base = -1; ljca_gpio->gc.ngpio = ljca_gpio->gpio_info->num; - ljca_gpio->gc.label = ACPI_COMPANION(&pdev->dev) ? - acpi_dev_name(ACPI_COMPANION(&pdev->dev)) : - dev_name(&pdev->dev); + ljca_gpio->gc.label = ACPI_COMPANION(&auxdev->dev) ? + acpi_dev_name(ACPI_COMPANION(&auxdev->dev)) : + dev_name(&auxdev->dev); ljca_gpio->gc.owner = THIS_MODULE; - platform_set_drvdata(pdev, ljca_gpio); - ljca_register_event_cb(ljca_gpio->gpio_info->ljca, ljca_gpio_event_cb, ljca_gpio); + auxiliary_set_drvdata(auxdev, ljca_gpio); + ljca_register_event_cb(ljca, ljca_gpio_event_cb, ljca_gpio); girq = &ljca_gpio->gc.irq; gpio_irq_chip_set_chip(girq, &ljca_gpio_irqchip); @@ -413,7 +454,7 @@ static int ljca_gpio_probe(struct platform_device *pdev) INIT_WORK(&ljca_gpio->work, ljca_gpio_async); ret = gpiochip_add_data(&ljca_gpio->gc, ljca_gpio); if (ret) { - ljca_unregister_event_cb(ljca_gpio->gpio_info->ljca); + ljca_unregister_event_cb(ljca); mutex_destroy(&ljca_gpio->irq_lock); mutex_destroy(&ljca_gpio->trans_lock); } @@ -421,33 +462,33 @@ static int ljca_gpio_probe(struct platform_device *pdev) return ret; } -static void ljca_gpio_remove(struct platform_device *pdev) +static void ljca_gpio_remove(struct auxiliary_device *auxdev) { - struct ljca_gpio_dev *ljca_gpio = platform_get_drvdata(pdev); + struct ljca_gpio_dev *ljca_gpio = auxiliary_get_drvdata(auxdev); gpiochip_remove(&ljca_gpio->gc); - ljca_unregister_event_cb(ljca_gpio->gpio_info->ljca); + ljca_unregister_event_cb(ljca_gpio->ljca); + cancel_work_sync(&ljca_gpio->work); mutex_destroy(&ljca_gpio->irq_lock); mutex_destroy(&ljca_gpio->trans_lock); } -#define LJCA_GPIO_DRV_NAME "ljca-gpio" -static const struct platform_device_id ljca_gpio_id[] = { - { LJCA_GPIO_DRV_NAME, 0 }, - { /* sentinel */ } +static const struct auxiliary_device_id ljca_gpio_id_table[] = { + { "usb_ljca.ljca-gpio", 0 }, + { /* sentinel */ }, }; -MODULE_DEVICE_TABLE(platform, ljca_gpio_id); +MODULE_DEVICE_TABLE(auxiliary, ljca_gpio_id_table); -static struct platform_driver ljca_gpio_driver = { - .driver.name = LJCA_GPIO_DRV_NAME, +static struct auxiliary_driver ljca_gpio_driver = { .probe = ljca_gpio_probe, - .remove_new = ljca_gpio_remove, + .remove = ljca_gpio_remove, + .id_table = ljca_gpio_id_table, }; -module_platform_driver(ljca_gpio_driver); +module_auxiliary_driver(ljca_gpio_driver); -MODULE_AUTHOR("Ye Xiang <xiang.ye@intel.com>"); -MODULE_AUTHOR("Wang Zhifeng <zhifeng.wang@intel.com>"); -MODULE_AUTHOR("Zhang Lixu <lixu.zhang@intel.com>"); +MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); +MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); +MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-GPIO driver"); MODULE_LICENSE("GPL"); MODULE_IMPORT_NS(LJCA); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 6644eebedaf3..fd887f767675 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1264,6 +1264,17 @@ config I2C_DLN2 This driver can also be built as a module. If so, the module will be called i2c-dln2. +config I2C_LJCA + tristate "I2C functionality of Intel La Jolla Cove Adapter" + depends on USB_LJCA + default USB_LJCA + help + If you say yes to this option, I2C functionality support of Intel + La Jolla Cove Adapter (LJCA) will be included. + + This driver can also be built as a module. If so, the module + will be called i2c-ljca. + config I2C_CP2615 tristate "Silicon Labs CP2615 USB sound card and I2C adapter" depends on USB diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index af56fe2c75c0..3757b9391e60 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -133,6 +133,7 @@ obj-$(CONFIG_I2C_GXP) += i2c-gxp.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o +obj-$(CONFIG_I2C_LJCA) += i2c-ljca.o obj-$(CONFIG_I2C_CP2615) += i2c-cp2615.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PCI1XXXX) += i2c-mchp-pci1xxxx.o diff --git a/drivers/i2c/busses/i2c-ljca.c b/drivers/i2c/busses/i2c-ljca.c new file mode 100644 index 000000000000..b4927622177c --- /dev/null +++ b/drivers/i2c/busses/i2c-ljca.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel La Jolla Cove Adapter USB-I2C driver + * + * Copyright (c) 2023, Intel Corporation. + */ + +#include <linux/acpi.h> +#include <linux/auxiliary_bus.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/dev_printk.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/usb/ljca.h> + +/* I2C init flags */ +#define LJCA_I2C_INIT_FLAG_MODE BIT(0) +#define LJCA_I2C_INIT_FLAG_MODE_POLLING FIELD_PREP(LJCA_I2C_INIT_FLAG_MODE, 0) +#define LJCA_I2C_INIT_FLAG_MODE_INTERRUPT FIELD_PREP(LJCA_I2C_INIT_FLAG_MODE, 1) + +#define LJCA_I2C_INIT_FLAG_ADDR_16BIT BIT(0) + +#define LJCA_I2C_INIT_FLAG_FREQ GENMASK(2, 1) +#define LJCA_I2C_INIT_FLAG_FREQ_100K FIELD_PREP(LJCA_I2C_INIT_FLAG_FREQ, 0) +#define LJCA_I2C_INIT_FLAG_FREQ_400K FIELD_PREP(LJCA_I2C_INIT_FLAG_FREQ, 1) +#define LJCA_I2C_INIT_FLAG_FREQ_1M FIELD_PREP(LJCA_I2C_INIT_FLAG_FREQ, 2) + +#define LJCA_I2C_BUF_SIZE 60u +#define LJCA_I2C_MAX_XFER_SIZE (LJCA_I2C_BUF_SIZE - sizeof(struct ljca_i2c_rw_packet)) + +/* I2C commands */ +enum ljca_i2c_cmd { + LJCA_I2C_INIT = 1, + LJCA_I2C_XFER, + LJCA_I2C_START, + LJCA_I2C_STOP, + LJCA_I2C_READ, + LJCA_I2C_WRITE, +}; + +enum ljca_xfer_type { + LJCA_I2C_WRITE_XFER_TYPE, + LJCA_I2C_READ_XFER_TYPE, +}; + +/* I2C raw commands: Init/Start/Read/Write/Stop */ +struct ljca_i2c_rw_packet { + u8 id; + __le16 len; + u8 data[] __counted_by(len); +} __packed; + +struct ljca_i2c_dev { + struct ljca_client *ljca; + struct ljca_i2c_info *i2c_info; + struct i2c_adapter adap; + + u8 obuf[LJCA_I2C_BUF_SIZE]; + u8 ibuf[LJCA_I2C_BUF_SIZE]; +}; + +static int ljca_i2c_init(struct ljca_i2c_dev *ljca_i2c, u8 id) +{ + struct ljca_i2c_rw_packet *w_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->obuf; + int ret; + + w_packet->id = id; + w_packet->len = cpu_to_le16(sizeof(*w_packet->data)); + w_packet->data[0] = LJCA_I2C_INIT_FLAG_FREQ_400K; + + ret = ljca_transfer(ljca_i2c->ljca, LJCA_I2C_INIT, (u8 *)w_packet, + struct_size(w_packet, data, 1), NULL, 0); + + return ret < 0 ? ret : 0; +} + +static int ljca_i2c_start(struct ljca_i2c_dev *ljca_i2c, u8 slave_addr, + enum ljca_xfer_type type) +{ + struct ljca_i2c_rw_packet *w_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->obuf; + struct ljca_i2c_rw_packet *r_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->ibuf; + s16 rp_len; + int ret; + + w_packet->id = ljca_i2c->i2c_info->id; + w_packet->len = cpu_to_le16(sizeof(*w_packet->data)); + w_packet->data[0] = (slave_addr << 1) | type; + + ret = ljca_transfer(ljca_i2c->ljca, LJCA_I2C_START, (u8 *)w_packet, + struct_size(w_packet, data, 1), (u8 *)r_packet, + LJCA_I2C_BUF_SIZE); + if (ret < 0 || ret < sizeof(*r_packet)) + return ret < 0 ? ret : -EIO; + + rp_len = le16_to_cpu(r_packet->len); + if (rp_len < 0 || r_packet->id != w_packet->id) { + dev_dbg(&ljca_i2c->adap.dev, + "i2c start failed len: %d id: %d %d\n", + rp_len, r_packet->id, w_packet->id); + return -EIO; + } + + return 0; +} + +static void ljca_i2c_stop(struct ljca_i2c_dev *ljca_i2c, u8 slave_addr) +{ + struct ljca_i2c_rw_packet *w_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->obuf; + struct ljca_i2c_rw_packet *r_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->ibuf; + s16 rp_len; + int ret; + + w_packet->id = ljca_i2c->i2c_info->id; + w_packet->len = cpu_to_le16(sizeof(*w_packet->data)); + w_packet->data[0] = 0; + + ret = ljca_transfer(ljca_i2c->ljca, LJCA_I2C_STOP, (u8 *)w_packet, + struct_size(w_packet, data, 1), (u8 *)r_packet, + LJCA_I2C_BUF_SIZE); + if (ret < 0 || ret < sizeof(*r_packet)) { + dev_dbg(&ljca_i2c->adap.dev, + "i2c stop failed ret: %d id: %d\n", + ret, w_packet->id); + return; + } + + rp_len = le16_to_cpu(r_packet->len); + if (rp_len < 0 || r_packet->id != w_packet->id) + dev_dbg(&ljca_i2c->adap.dev, + "i2c stop failed len: %d id: %d %d\n", + rp_len, r_packet->id, w_packet->id); +} + +static int ljca_i2c_pure_read(struct ljca_i2c_dev *ljca_i2c, u8 *data, u8 len) +{ + struct ljca_i2c_rw_packet *w_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->obuf; + struct ljca_i2c_rw_packet *r_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->ibuf; + s16 rp_len; + int ret; + + w_packet->id = ljca_i2c->i2c_info->id; + w_packet->len = cpu_to_le16(len); + w_packet->data[0] = 0; + + ret = ljca_transfer(ljca_i2c->ljca, LJCA_I2C_READ, (u8 *)w_packet, + struct_size(w_packet, data, 1), (u8 *)r_packet, + LJCA_I2C_BUF_SIZE); + if (ret < 0 || ret < sizeof(*r_packet)) + return ret < 0 ? ret : -EIO; + + rp_len = le16_to_cpu(r_packet->len); + if (rp_len != len || r_packet->id != w_packet->id) { + dev_dbg(&ljca_i2c->adap.dev, + "i2c raw read failed len: %d id: %d %d\n", + rp_len, r_packet->id, w_packet->id); + return -EIO; + } + + memcpy(data, r_packet->data, len); + + return 0; +} + +static int ljca_i2c_read(struct ljca_i2c_dev *ljca_i2c, u8 slave_addr, u8 *data, + u8 len) +{ + int ret; + + ret = ljca_i2c_start(ljca_i2c, slave_addr, LJCA_I2C_READ_XFER_TYPE); + if (!ret) + ret = ljca_i2c_pure_read(ljca_i2c, data, len); + + ljca_i2c_stop(ljca_i2c, slave_addr); + + return ret; +} + +static int ljca_i2c_pure_write(struct ljca_i2c_dev *ljca_i2c, u8 *data, u8 len) +{ + struct ljca_i2c_rw_packet *w_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->obuf; + struct ljca_i2c_rw_packet *r_packet = + (struct ljca_i2c_rw_packet *)ljca_i2c->ibuf; + s16 rplen; + int ret; + + w_packet->id = ljca_i2c->i2c_info->id; + w_packet->len = cpu_to_le16(len); + memcpy(w_packet->data, data, len); + + ret = ljca_transfer(ljca_i2c->ljca, LJCA_I2C_WRITE, (u8 *)w_packet, + struct_size(w_packet, data, len), (u8 *)r_packet, + LJCA_I2C_BUF_SIZE); + if (ret < 0 || ret < sizeof(*r_packet)) + return ret < 0 ? ret : -EIO; + + rplen = le16_to_cpu(r_packet->len); + if (rplen != len || r_packet->id != w_packet->id) { + dev_dbg(&ljca_i2c->adap.dev, + "i2c write failed len: %d id: %d/%d\n", + rplen, r_packet->id, w_packet->id); + return -EIO; + } + + return 0; +} + +static int ljca_i2c_write(struct ljca_i2c_dev *ljca_i2c, u8 slave_addr, + u8 *data, u8 len) +{ + int ret; + + ret = ljca_i2c_start(ljca_i2c, slave_addr, LJCA_I2C_WRITE_XFER_TYPE); + if (!ret) + ret = ljca_i2c_pure_write(ljca_i2c, data, len); + + ljca_i2c_stop(ljca_i2c, slave_addr); + + return ret; +} + +static int ljca_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msg, + int num) +{ + struct ljca_i2c_dev *ljca_i2c; + struct i2c_msg *cur_msg; + int i, ret; + + ljca_i2c = i2c_get_adapdata(adapter); + if (!ljca_i2c) + return -EINVAL; + + for (i = 0; i < num; i++) { + cur_msg = &msg[i]; + if (cur_msg->flags & I2C_M_RD) + ret = ljca_i2c_read(ljca_i2c, cur_msg->addr, + cur_msg->buf, cur_msg->len); + else + ret = ljca_i2c_write(ljca_i2c, cur_msg->addr, + cur_msg->buf, cur_msg->len); + + if (ret) + return ret; + } + + return num; +} + +static u32 ljca_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +static const struct i2c_adapter_quirks ljca_i2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN, + .max_read_len = LJCA_I2C_MAX_XFER_SIZE, + .max_write_len = LJCA_I2C_MAX_XFER_SIZE, +}; + +static const struct i2c_algorithm ljca_i2c_algo = { + .master_xfer = ljca_i2c_xfer, + .functionality = ljca_i2c_func, +}; + +static int ljca_i2c_probe(struct auxiliary_device *auxdev, + const struct auxiliary_device_id *aux_dev_id) +{ + struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev); + struct ljca_i2c_dev *ljca_i2c; + int ret; + + ljca_i2c = devm_kzalloc(&auxdev->dev, sizeof(*ljca_i2c), GFP_KERNEL); + if (!ljca_i2c) + return -ENOMEM; + + ljca_i2c->ljca = ljca; + ljca_i2c->i2c_info = dev_get_platdata(&auxdev->dev); + + ljca_i2c->adap.owner = THIS_MODULE; + ljca_i2c->adap.class = I2C_CLASS_HWMON; + ljca_i2c->adap.algo = &ljca_i2c_algo; + ljca_i2c->adap.quirks = &ljca_i2c_quirks; + ljca_i2c->adap.dev.parent = &auxdev->dev; + + snprintf(ljca_i2c->adap.name, sizeof(ljca_i2c->adap.name), "%s-%s-%d", + dev_name(&auxdev->dev), dev_name(auxdev->dev.parent), + ljca_i2c->i2c_info->id); + + device_set_node(&ljca_i2c->adap.dev, dev_fwnode(&auxdev->dev)); + + i2c_set_adapdata(&ljca_i2c->adap, ljca_i2c); + auxiliary_set_drvdata(auxdev, ljca_i2c); + + ret = ljca_i2c_init(ljca_i2c, ljca_i2c->i2c_info->id); + if (ret) + return dev_err_probe(&auxdev->dev, -EIO, + "i2c init failed id: %d\n", + ljca_i2c->i2c_info->id); + + ret = devm_i2c_add_adapter(&auxdev->dev, &ljca_i2c->adap); + if (ret) + return ret; + + if (has_acpi_companion(&ljca_i2c->adap.dev)) + acpi_dev_clear_dependencies(ACPI_COMPANION(&ljca_i2c->adap.dev)); + + return 0; +} + +static void ljca_i2c_remove(struct auxiliary_device *auxdev) +{ + struct ljca_i2c_dev *ljca_i2c = auxiliary_get_drvdata(auxdev); + + i2c_del_adapter(&ljca_i2c->adap); +} + +static const struct auxiliary_device_id ljca_i2c_id_table[] = { + { "usb_ljca.ljca-i2c", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(auxiliary, ljca_i2c_id_table); + +static struct auxiliary_driver ljca_i2c_driver = { + .probe = ljca_i2c_probe, + .remove = ljca_i2c_remove, + .id_table = ljca_i2c_id_table, +}; +module_auxiliary_driver(ljca_i2c_driver); + +MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); +MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); +MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); +MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-I2C driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(LJCA); diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c index 67000e4a8082..2b2f14a1b711 100644 --- a/drivers/platform/chrome/cros_ec_typec.c +++ b/drivers/platform/chrome/cros_ec_typec.c @@ -492,6 +492,8 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec, { struct cros_typec_port *port = typec->ports[port_num]; struct typec_displayport_data dp_data; + u32 cable_tbt_vdo; + u32 cable_dp_vdo; int ret; if (typec->pd_ctrl_ver < 2) { @@ -524,6 +526,32 @@ static int cros_typec_enable_dp(struct cros_typec_data *typec, port->state.data = &dp_data; port->state.mode = TYPEC_MODAL_STATE(ffs(pd_ctrl->dp_mode)); + /* Get cable VDO for cables with DPSID to check DPAM2.1 is supported */ + cable_dp_vdo = cros_typec_get_cable_vdo(port, USB_TYPEC_DP_SID); + + /** + * Get cable VDO for thunderbolt cables and cables with DPSID but does not + * support DPAM2.1. + */ + cable_tbt_vdo = cros_typec_get_cable_vdo(port, USB_TYPEC_TBT_SID); + + if (cable_dp_vdo & DP_CAP_DPAM_VERSION) { + dp_data.conf |= cable_dp_vdo; + } else if (cable_tbt_vdo) { + dp_data.conf |= TBT_CABLE_SPEED(cable_tbt_vdo) << DP_CONF_SIGNALLING_SHIFT; + + /* Cable Type */ + if (cable_tbt_vdo & TBT_CABLE_OPTICAL) + dp_data.conf |= DP_CONF_CABLE_TYPE_OPTICAL << DP_CONF_CABLE_TYPE_SHIFT; + else if (cable_tbt_vdo & TBT_CABLE_RETIMER) + dp_data.conf |= DP_CONF_CABLE_TYPE_RE_TIMER << DP_CONF_CABLE_TYPE_SHIFT; + else if (cable_tbt_vdo & TBT_CABLE_ACTIVE_PASSIVE) + dp_data.conf |= DP_CONF_CABLE_TYPE_RE_DRIVER << DP_CONF_CABLE_TYPE_SHIFT; + } else if (PD_IDH_PTYPE(port->c_identity.id_header) == IDH_PTYPE_PCABLE) { + dp_data.conf |= VDO_TYPEC_CABLE_SPEED(port->c_identity.vdo[0]) << + DP_CONF_SIGNALLING_SHIFT; + } + ret = cros_typec_retimer_set(port->retimer, port->state); if (!ret) ret = typec_mux_set(port->mux, &port->state); diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c index b3a1ba326a3e..2382749a2f53 100644 --- a/drivers/power/supply/tps65217_charger.c +++ b/drivers/power/supply/tps65217_charger.c @@ -237,7 +237,7 @@ static int tps65217_charger_probe(struct platform_device *pdev) for (i = 0; i < NUM_CHARGER_IRQS; i++) { ret = devm_request_threaded_irq(&pdev->dev, irq[i], NULL, tps65217_charger_irq, - IRQF_ONESHOT, "tps65217-charger", + IRQF_SHARED, "tps65217-charger", charger); if (ret) { dev_err(charger->dev, diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d4ac184bce95..35dbfacecf1c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -616,6 +616,17 @@ config SPI_FSL_ESPI From MPC8536, 85xx platform uses the controller, and all P10xx, P20xx, P30xx,P40xx, P50xx uses this controller. +config SPI_LJCA + tristate "Intel La Jolla Cove Adapter SPI support" + depends on USB_LJCA + default USB_LJCA + help + Select this option to enable SPI driver for the Intel + La Jolla Cove Adapter (LJCA) board. + + This driver can also be built as a module. If so, the module + will be called spi-ljca. + config SPI_MESON_SPICC tristate "Amlogic Meson SPICC controller" depends on COMMON_CLK diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 6af54842b9fa..4ff8d725ba5e 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel-pci.o obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o obj-$(CONFIG_SPI_JCORE) += spi-jcore.o +obj-$(CONFIG_SPI_LJCA) += spi-ljca.o obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o obj-$(CONFIG_SPI_LOONGSON_CORE) += spi-loongson-core.o obj-$(CONFIG_SPI_LOONGSON_PCI) += spi-loongson-pci.o diff --git a/drivers/spi/spi-ljca.c b/drivers/spi/spi-ljca.c new file mode 100644 index 000000000000..c5a066c73817 --- /dev/null +++ b/drivers/spi/spi-ljca.c @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel La Jolla Cove Adapter USB-SPI driver + * + * Copyright (c) 2023, Intel Corporation. + */ + +#include <linux/auxiliary_bus.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/dev_printk.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/usb/ljca.h> + +#define LJCA_SPI_BUS_MAX_HZ 48000000 + +#define LJCA_SPI_BUF_SIZE 60u +#define LJCA_SPI_MAX_XFER_SIZE \ + (LJCA_SPI_BUF_SIZE - sizeof(struct ljca_spi_xfer_packet)) + +#define LJCA_SPI_CLK_MODE_POLARITY BIT(0) +#define LJCA_SPI_CLK_MODE_PHASE BIT(1) + +#define LJCA_SPI_XFER_INDICATOR_ID GENMASK(5, 0) +#define LJCA_SPI_XFER_INDICATOR_CMPL BIT(6) +#define LJCA_SPI_XFER_INDICATOR_INDEX BIT(7) + +/* SPI commands */ +enum ljca_spi_cmd { + LJCA_SPI_INIT = 1, + LJCA_SPI_READ, + LJCA_SPI_WRITE, + LJCA_SPI_WRITEREAD, + LJCA_SPI_DEINIT, +}; + +enum { + LJCA_SPI_BUS_SPEED_24M, + LJCA_SPI_BUS_SPEED_12M, + LJCA_SPI_BUS_SPEED_8M, + LJCA_SPI_BUS_SPEED_6M, + LJCA_SPI_BUS_SPEED_4_8M, /*4.8MHz*/ + LJCA_SPI_BUS_SPEED_MIN = LJCA_SPI_BUS_SPEED_4_8M, +}; + +enum { + LJCA_SPI_CLOCK_LOW_POLARITY, + LJCA_SPI_CLOCK_HIGH_POLARITY, +}; + +enum { + LJCA_SPI_CLOCK_FIRST_PHASE, + LJCA_SPI_CLOCK_SECOND_PHASE, +}; + +struct ljca_spi_init_packet { + u8 index; + u8 speed; + u8 mode; +} __packed; + +struct ljca_spi_xfer_packet { + u8 indicator; + u8 len; + u8 data[] __counted_by(len); +} __packed; + +struct ljca_spi_dev { + struct ljca_client *ljca; + struct spi_controller *controller; + struct ljca_spi_info *spi_info; + u8 speed; + u8 mode; + + u8 obuf[LJCA_SPI_BUF_SIZE]; + u8 ibuf[LJCA_SPI_BUF_SIZE]; +}; + +static int ljca_spi_read_write(struct ljca_spi_dev *ljca_spi, const u8 *w_data, + u8 *r_data, int len, int id, int complete, + int cmd) +{ + struct ljca_spi_xfer_packet *w_packet = + (struct ljca_spi_xfer_packet *)ljca_spi->obuf; + struct ljca_spi_xfer_packet *r_packet = + (struct ljca_spi_xfer_packet *)ljca_spi->ibuf; + int ret; + + w_packet->indicator = FIELD_PREP(LJCA_SPI_XFER_INDICATOR_ID, id) | + FIELD_PREP(LJCA_SPI_XFER_INDICATOR_CMPL, complete) | + FIELD_PREP(LJCA_SPI_XFER_INDICATOR_INDEX, + ljca_spi->spi_info->id); + + if (cmd == LJCA_SPI_READ) { + w_packet->len = sizeof(u16); + *(__le16 *)&w_packet->data[0] = cpu_to_le16(len); + } else { + w_packet->len = len; + memcpy(w_packet->data, w_data, len); + } + + ret = ljca_transfer(ljca_spi->ljca, cmd, (u8 *)w_packet, + struct_size(w_packet, data, w_packet->len), + (u8 *)r_packet, LJCA_SPI_BUF_SIZE); + if (ret < 0) + return ret; + else if (ret < sizeof(*r_packet) || r_packet->len <= 0) + return -EIO; + + if (r_data) + memcpy(r_data, r_packet->data, r_packet->len); + + return 0; +} + +static int ljca_spi_init(struct ljca_spi_dev *ljca_spi, u8 div, u8 mode) +{ + struct ljca_spi_init_packet w_packet = {}; + int ret; + + if (ljca_spi->mode == mode && ljca_spi->speed == div) + return 0; + + w_packet.index = ljca_spi->spi_info->id; + w_packet.speed = div; + w_packet.mode = FIELD_PREP(LJCA_SPI_CLK_MODE_POLARITY, + (mode & SPI_CPOL) ? LJCA_SPI_CLOCK_HIGH_POLARITY : + LJCA_SPI_CLOCK_LOW_POLARITY) | + FIELD_PREP(LJCA_SPI_CLK_MODE_PHASE, + (mode & SPI_CPHA) ? LJCA_SPI_CLOCK_SECOND_PHASE : + LJCA_SPI_CLOCK_FIRST_PHASE); + + ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_INIT, (u8 *)&w_packet, + sizeof(w_packet), NULL, 0); + if (ret < 0) + return ret; + + ljca_spi->mode = mode; + ljca_spi->speed = div; + + return 0; +} + +static int ljca_spi_deinit(struct ljca_spi_dev *ljca_spi) +{ + struct ljca_spi_init_packet w_packet = {}; + int ret; + + w_packet.index = ljca_spi->spi_info->id; + + ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_DEINIT, (u8 *)&w_packet, + sizeof(w_packet), NULL, 0); + + return ret < 0 ? ret : 0; +} + +static inline int ljca_spi_transfer(struct ljca_spi_dev *ljca_spi, + const u8 *tx_data, u8 *rx_data, u16 len) +{ + int complete, cur_len; + int remaining = len; + int cmd, ret, i; + int offset = 0; + + if (tx_data && rx_data) + cmd = LJCA_SPI_WRITEREAD; + else if (tx_data) + cmd = LJCA_SPI_WRITE; + else if (rx_data) + cmd = LJCA_SPI_READ; + else + return -EINVAL; + + for (i = 0; remaining > 0; i++) { + cur_len = min_t(unsigned int, remaining, LJCA_SPI_MAX_XFER_SIZE); + complete = (cur_len == remaining); + + ret = ljca_spi_read_write(ljca_spi, + tx_data ? tx_data + offset : NULL, + rx_data ? rx_data + offset : NULL, + cur_len, i, complete, cmd); + if (ret) + return ret; + + offset += cur_len; + remaining -= cur_len; + } + + return 0; +} + +static int ljca_spi_transfer_one(struct spi_controller *controller, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + u8 div = DIV_ROUND_UP(controller->max_speed_hz, xfer->speed_hz) / 2 - 1; + struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); + int ret; + + div = min_t(u8, LJCA_SPI_BUS_SPEED_MIN, div); + + ret = ljca_spi_init(ljca_spi, div, spi->mode); + if (ret) { + dev_err(&ljca_spi->ljca->auxdev.dev, + "cannot initialize transfer ret %d\n", ret); + return ret; + } + + ret = ljca_spi_transfer(ljca_spi, xfer->tx_buf, xfer->rx_buf, xfer->len); + if (ret) + dev_err(&ljca_spi->ljca->auxdev.dev, + "transfer failed len: %d\n", xfer->len); + + return ret; +} + +static int ljca_spi_probe(struct auxiliary_device *auxdev, + const struct auxiliary_device_id *aux_dev_id) +{ + struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev); + struct spi_controller *controller; + struct ljca_spi_dev *ljca_spi; + int ret; + + controller = devm_spi_alloc_master(&auxdev->dev, sizeof(*ljca_spi)); + if (!controller) + return -ENOMEM; + + ljca_spi = spi_controller_get_devdata(controller); + ljca_spi->ljca = ljca; + ljca_spi->spi_info = dev_get_platdata(&auxdev->dev); + ljca_spi->controller = controller; + + controller->bus_num = -1; + controller->mode_bits = SPI_CPHA | SPI_CPOL; + controller->transfer_one = ljca_spi_transfer_one; + controller->auto_runtime_pm = false; + controller->max_speed_hz = LJCA_SPI_BUS_MAX_HZ; + + device_set_node(&ljca_spi->controller->dev, dev_fwnode(&auxdev->dev)); + auxiliary_set_drvdata(auxdev, controller); + + ret = spi_register_controller(controller); + if (ret) + dev_err(&auxdev->dev, "Failed to register controller\n"); + + return ret; +} + +static void ljca_spi_dev_remove(struct auxiliary_device *auxdev) +{ + struct spi_controller *controller = auxiliary_get_drvdata(auxdev); + struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); + + spi_unregister_controller(controller); + ljca_spi_deinit(ljca_spi); +} + +static int ljca_spi_dev_suspend(struct device *dev) +{ + struct spi_controller *controller = dev_get_drvdata(dev); + + return spi_controller_suspend(controller); +} + +static int ljca_spi_dev_resume(struct device *dev) +{ + struct spi_controller *controller = dev_get_drvdata(dev); + + return spi_controller_resume(controller); +} + +static const struct dev_pm_ops ljca_spi_pm = { + SYSTEM_SLEEP_PM_OPS(ljca_spi_dev_suspend, ljca_spi_dev_resume) +}; + +static const struct auxiliary_device_id ljca_spi_id_table[] = { + { "usb_ljca.ljca-spi", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(auxiliary, ljca_spi_id_table); + +static struct auxiliary_driver ljca_spi_driver = { + .driver.pm = &ljca_spi_pm, + .probe = ljca_spi_probe, + .remove = ljca_spi_dev_remove, + .id_table = ljca_spi_id_table, +}; +module_auxiliary_driver(ljca_spi_driver); + +MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); +MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); +MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); +MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-SPI driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(LJCA); diff --git a/drivers/thunderbolt/clx.c b/drivers/thunderbolt/clx.c index 13d217ae98e6..787dfd1550e5 100644 --- a/drivers/thunderbolt/clx.c +++ b/drivers/thunderbolt/clx.c @@ -175,6 +175,28 @@ bool tb_port_clx_is_enabled(struct tb_port *port, unsigned int clx) } /** + * tb_switch_clx_is_supported() - Is CLx supported on this type of router + * @sw: The router to check CLx support for + */ +static bool tb_switch_clx_is_supported(const struct tb_switch *sw) +{ + if (!clx_enabled) + return false; + + if (sw->quirks & QUIRK_NO_CLX) + return false; + + /* + * CLx is not enabled and validated on Intel USB4 platforms + * before Alder Lake. + */ + if (tb_switch_is_tiger_lake(sw)) + return false; + + return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw); +} + +/** * tb_switch_clx_init() - Initialize router CL states * @sw: Router * @@ -273,28 +295,6 @@ static int tb_switch_mask_clx_objections(struct tb_switch *sw) sw->cap_lp + offset, ARRAY_SIZE(val)); } -/** - * tb_switch_clx_is_supported() - Is CLx supported on this type of router - * @sw: The router to check CLx support for - */ -bool tb_switch_clx_is_supported(const struct tb_switch *sw) -{ - if (!clx_enabled) - return false; - - if (sw->quirks & QUIRK_NO_CLX) - return false; - - /* - * CLx is not enabled and validated on Intel USB4 platforms - * before Alder Lake. - */ - if (tb_switch_is_tiger_lake(sw)) - return false; - - return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw); -} - static bool validate_mask(unsigned int clx) { /* Previous states need to be enabled */ @@ -405,6 +405,9 @@ int tb_switch_clx_disable(struct tb_switch *sw) if (!clx) return 0; + if (sw->is_unplugged) + return clx; + up = tb_upstream_port(sw); down = tb_switch_downstream_port(sw); diff --git a/drivers/thunderbolt/dma_test.c b/drivers/thunderbolt/dma_test.c index 39476fc48801..9e47a63f28e7 100644 --- a/drivers/thunderbolt/dma_test.c +++ b/drivers/thunderbolt/dma_test.c @@ -101,7 +101,7 @@ struct dma_test { unsigned int packets_sent; unsigned int packets_received; unsigned int link_speed; - unsigned int link_width; + enum tb_link_width link_width; unsigned int crc_errors; unsigned int buffer_overflow_errors; enum dma_test_result result; @@ -465,9 +465,9 @@ DMA_TEST_DEBUGFS_ATTR(packets_to_send, packets_to_send_get, static int dma_test_set_bonding(struct dma_test *dt) { switch (dt->link_width) { - case 2: + case TB_LINK_WIDTH_DUAL: return tb_xdomain_lane_bonding_enable(dt->xd); - case 1: + case TB_LINK_WIDTH_SINGLE: tb_xdomain_lane_bonding_disable(dt->xd); fallthrough; default: @@ -490,12 +490,8 @@ static void dma_test_check_errors(struct dma_test *dt, int ret) if (!dt->error_code) { if (dt->link_speed && dt->xd->link_speed != dt->link_speed) { dt->error_code = DMA_TEST_SPEED_ERROR; - } else if (dt->link_width) { - const struct tb_xdomain *xd = dt->xd; - - if ((dt->link_width == 1 && xd->link_width != TB_LINK_WIDTH_SINGLE) || - (dt->link_width == 2 && xd->link_width < TB_LINK_WIDTH_DUAL)) - dt->error_code = DMA_TEST_WIDTH_ERROR; + } else if (dt->link_width && dt->link_width != dt->xd->link_width) { + dt->error_code = DMA_TEST_WIDTH_ERROR; } else if (dt->packets_to_send != dt->packets_sent || dt->packets_to_receive != dt->packets_received || dt->crc_errors || dt->buffer_overflow_errors) { diff --git a/drivers/thunderbolt/path.c b/drivers/thunderbolt/path.c index ee03fd75a472..091a81bbdbdc 100644 --- a/drivers/thunderbolt/path.c +++ b/drivers/thunderbolt/path.c @@ -19,9 +19,9 @@ static void tb_dump_hop(const struct tb_path_hop *hop, const struct tb_regs_hop tb_port_dbg(port, " In HopID: %d => Out port: %d Out HopID: %d\n", hop->in_hop_index, regs->out_port, regs->next_hop); - tb_port_dbg(port, " Weight: %d Priority: %d Credits: %d Drop: %d\n", - regs->weight, regs->priority, - regs->initial_credits, regs->drop_packages); + tb_port_dbg(port, " Weight: %d Priority: %d Credits: %d Drop: %d PM: %d\n", + regs->weight, regs->priority, regs->initial_credits, + regs->drop_packages, regs->pmps); tb_port_dbg(port, " Counter enabled: %d Counter index: %d\n", regs->counter_enable, regs->counter); tb_port_dbg(port, " Flow Control (In/Eg): %d/%d Shared Buffer (In/Eg): %d/%d\n", @@ -535,6 +535,7 @@ int tb_path_activate(struct tb_path *path) hop.next_hop = path->hops[i].next_hop_index; hop.out_port = path->hops[i].out_port->port; hop.initial_credits = path->hops[i].initial_credits; + hop.pmps = path->hops[i].pm_support; hop.unknown1 = 0; hop.enable = 1; diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c index 488138a28ae1..e6bfa63b40ae 100644 --- a/drivers/thunderbolt/quirks.c +++ b/drivers/thunderbolt/quirks.c @@ -31,6 +31,9 @@ static void quirk_usb3_maximum_bandwidth(struct tb_switch *sw) { struct tb_port *port; + if (tb_switch_is_icm(sw)) + return; + tb_switch_for_each_port(sw, port) { if (!tb_port_is_usb3_down(port)) continue; diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index 47becb363ada..d49d6628dbf2 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -94,6 +94,7 @@ static int tb_retimer_nvm_add(struct tb_retimer *rt) goto err_nvm; rt->nvm = nvm; + dev_dbg(&rt->dev, "NVM version %x.%x\n", nvm->major, nvm->minor); return 0; err_nvm: diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index bd5815f8f23b..1e15ffa79295 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -372,6 +372,7 @@ static int tb_switch_nvm_add(struct tb_switch *sw) ret = tb_nvm_add_active(nvm, nvm_read); if (ret) goto err_nvm; + tb_sw_dbg(sw, "NVM version %x.%x\n", nvm->major, nvm->minor); } if (!sw->no_nvm_upgrade) { @@ -915,6 +916,48 @@ int tb_port_get_link_speed(struct tb_port *port) } /** + * tb_port_get_link_generation() - Returns link generation + * @port: Lane adapter + * + * Returns link generation as number or negative errno in case of + * failure. Does not distinguish between Thunderbolt 1 and Thunderbolt 2 + * links so for those always returns 2. + */ +int tb_port_get_link_generation(struct tb_port *port) +{ + int ret; + + ret = tb_port_get_link_speed(port); + if (ret < 0) + return ret; + + switch (ret) { + case 40: + return 4; + case 20: + return 3; + default: + return 2; + } +} + +static const char *width_name(enum tb_link_width width) +{ + switch (width) { + case TB_LINK_WIDTH_SINGLE: + return "symmetric, single lane"; + case TB_LINK_WIDTH_DUAL: + return "symmetric, dual lanes"; + case TB_LINK_WIDTH_ASYM_TX: + return "asymmetric, 3 transmitters, 1 receiver"; + case TB_LINK_WIDTH_ASYM_RX: + return "asymmetric, 3 receivers, 1 transmitter"; + default: + return "unknown"; + } +} + +/** * tb_port_get_link_width() - Get current link width * @port: Port to check (USB4 or CIO) * @@ -939,8 +982,15 @@ int tb_port_get_link_width(struct tb_port *port) LANE_ADP_CS_1_CURRENT_WIDTH_SHIFT; } -static bool tb_port_is_width_supported(struct tb_port *port, - unsigned int width_mask) +/** + * tb_port_width_supported() - Is the given link width supported + * @port: Port to check + * @width: Widths to check (bitmask) + * + * Can be called to any lane adapter. Checks if given @width is + * supported by the hardware and returns %true if it is. + */ +bool tb_port_width_supported(struct tb_port *port, unsigned int width) { u32 phy, widths; int ret; @@ -948,20 +998,23 @@ static bool tb_port_is_width_supported(struct tb_port *port, if (!port->cap_phy) return false; + if (width & (TB_LINK_WIDTH_ASYM_TX | TB_LINK_WIDTH_ASYM_RX)) { + if (tb_port_get_link_generation(port) < 4 || + !usb4_port_asym_supported(port)) + return false; + } + ret = tb_port_read(port, &phy, TB_CFG_PORT, port->cap_phy + LANE_ADP_CS_0, 1); if (ret) return false; - widths = (phy & LANE_ADP_CS_0_SUPPORTED_WIDTH_MASK) >> - LANE_ADP_CS_0_SUPPORTED_WIDTH_SHIFT; - - return widths & width_mask; -} - -static bool is_gen4_link(struct tb_port *port) -{ - return tb_port_get_link_speed(port) > 20; + /* + * The field encoding is the same as &enum tb_link_width (which is + * passed to @width). + */ + widths = FIELD_GET(LANE_ADP_CS_0_SUPPORTED_WIDTH_MASK, phy); + return widths & width; } /** @@ -991,15 +1044,23 @@ int tb_port_set_link_width(struct tb_port *port, enum tb_link_width width) switch (width) { case TB_LINK_WIDTH_SINGLE: /* Gen 4 link cannot be single */ - if (is_gen4_link(port)) + if (tb_port_get_link_generation(port) >= 4) return -EOPNOTSUPP; val |= LANE_ADP_CS_1_TARGET_WIDTH_SINGLE << LANE_ADP_CS_1_TARGET_WIDTH_SHIFT; break; + case TB_LINK_WIDTH_DUAL: + if (tb_port_get_link_generation(port) >= 4) + return usb4_port_asym_set_link_width(port, width); val |= LANE_ADP_CS_1_TARGET_WIDTH_DUAL << LANE_ADP_CS_1_TARGET_WIDTH_SHIFT; break; + + case TB_LINK_WIDTH_ASYM_TX: + case TB_LINK_WIDTH_ASYM_RX: + return usb4_port_asym_set_link_width(port, width); + default: return -EINVAL; } @@ -1124,7 +1185,7 @@ void tb_port_lane_bonding_disable(struct tb_port *port) /** * tb_port_wait_for_link_width() - Wait until link reaches specific width * @port: Port to wait for - * @width_mask: Expected link width mask + * @width: Expected link width (bitmask) * @timeout_msec: Timeout in ms how long to wait * * Should be used after both ends of the link have been bonded (or @@ -1133,14 +1194,15 @@ void tb_port_lane_bonding_disable(struct tb_port *port) * within the given timeout, %0 if it did. Can be passed a mask of * expected widths and succeeds if any of the widths is reached. */ -int tb_port_wait_for_link_width(struct tb_port *port, unsigned int width_mask, +int tb_port_wait_for_link_width(struct tb_port *port, unsigned int width, int timeout_msec) { ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec); int ret; /* Gen 4 link does not support single lane */ - if ((width_mask & TB_LINK_WIDTH_SINGLE) && is_gen4_link(port)) + if ((width & TB_LINK_WIDTH_SINGLE) && + tb_port_get_link_generation(port) >= 4) return -EOPNOTSUPP; do { @@ -1153,7 +1215,7 @@ int tb_port_wait_for_link_width(struct tb_port *port, unsigned int width_mask, */ if (ret != -EACCES) return ret; - } else if (ret & width_mask) { + } else if (ret & width) { return 0; } @@ -1332,7 +1394,7 @@ int tb_pci_port_enable(struct tb_port *port, bool enable) * tb_dp_port_hpd_is_active() - Is HPD already active * @port: DP out port to check * - * Checks if the DP OUT adapter port has HDP bit already set. + * Checks if the DP OUT adapter port has HPD bit already set. */ int tb_dp_port_hpd_is_active(struct tb_port *port) { @@ -1344,14 +1406,14 @@ int tb_dp_port_hpd_is_active(struct tb_port *port) if (ret) return ret; - return !!(data & ADP_DP_CS_2_HDP); + return !!(data & ADP_DP_CS_2_HPD); } /** * tb_dp_port_hpd_clear() - Clear HPD from DP IN port * @port: Port to clear HPD * - * If the DP IN port has HDP set, this function can be used to clear it. + * If the DP IN port has HPD set, this function can be used to clear it. */ int tb_dp_port_hpd_clear(struct tb_port *port) { @@ -1363,7 +1425,7 @@ int tb_dp_port_hpd_clear(struct tb_port *port) if (ret) return ret; - data |= ADP_DP_CS_3_HDPC; + data |= ADP_DP_CS_3_HPDC; return tb_port_write(port, &data, TB_CFG_PORT, port->cap_adap + ADP_DP_CS_3, 1); } @@ -2697,6 +2759,38 @@ static int tb_switch_update_link_attributes(struct tb_switch *sw) return 0; } +/* Must be called after tb_switch_update_link_attributes() */ +static void tb_switch_link_init(struct tb_switch *sw) +{ + struct tb_port *up, *down; + bool bonded; + + if (!tb_route(sw) || tb_switch_is_icm(sw)) + return; + + tb_sw_dbg(sw, "current link speed %u.0 Gb/s\n", sw->link_speed); + tb_sw_dbg(sw, "current link width %s\n", width_name(sw->link_width)); + + bonded = sw->link_width >= TB_LINK_WIDTH_DUAL; + + /* + * Gen 4 links come up as bonded so update the port structures + * accordingly. + */ + up = tb_upstream_port(sw); + down = tb_switch_downstream_port(sw); + + up->bonded = bonded; + if (up->dual_link_port) + up->dual_link_port->bonded = bonded; + tb_port_update_credits(up); + + down->bonded = bonded; + if (down->dual_link_port) + down->dual_link_port->bonded = bonded; + tb_port_update_credits(down); +} + /** * tb_switch_lane_bonding_enable() - Enable lane bonding * @sw: Switch to enable lane bonding @@ -2705,24 +2799,20 @@ static int tb_switch_update_link_attributes(struct tb_switch *sw) * switch. If conditions are correct and both switches support the feature, * lanes are bonded. It is safe to call this to any switch. */ -int tb_switch_lane_bonding_enable(struct tb_switch *sw) +static int tb_switch_lane_bonding_enable(struct tb_switch *sw) { struct tb_port *up, *down; - u64 route = tb_route(sw); - unsigned int width_mask; + unsigned int width; int ret; - if (!route) - return 0; - if (!tb_switch_lane_bonding_possible(sw)) return 0; up = tb_upstream_port(sw); down = tb_switch_downstream_port(sw); - if (!tb_port_is_width_supported(up, TB_LINK_WIDTH_DUAL) || - !tb_port_is_width_supported(down, TB_LINK_WIDTH_DUAL)) + if (!tb_port_width_supported(up, TB_LINK_WIDTH_DUAL) || + !tb_port_width_supported(down, TB_LINK_WIDTH_DUAL)) return 0; /* @@ -2746,21 +2836,10 @@ int tb_switch_lane_bonding_enable(struct tb_switch *sw) } /* Any of the widths are all bonded */ - width_mask = TB_LINK_WIDTH_DUAL | TB_LINK_WIDTH_ASYM_TX | - TB_LINK_WIDTH_ASYM_RX; - - ret = tb_port_wait_for_link_width(down, width_mask, 100); - if (ret) { - tb_port_warn(down, "timeout enabling lane bonding\n"); - return ret; - } + width = TB_LINK_WIDTH_DUAL | TB_LINK_WIDTH_ASYM_TX | + TB_LINK_WIDTH_ASYM_RX; - tb_port_update_credits(down); - tb_port_update_credits(up); - tb_switch_update_link_attributes(sw); - - tb_sw_dbg(sw, "lane bonding enabled\n"); - return ret; + return tb_port_wait_for_link_width(down, width, 100); } /** @@ -2770,20 +2849,27 @@ int tb_switch_lane_bonding_enable(struct tb_switch *sw) * Disables lane bonding between @sw and parent. This can be called even * if lanes were not bonded originally. */ -void tb_switch_lane_bonding_disable(struct tb_switch *sw) +static int tb_switch_lane_bonding_disable(struct tb_switch *sw) { struct tb_port *up, *down; int ret; - if (!tb_route(sw)) - return; - up = tb_upstream_port(sw); if (!up->bonded) - return; + return 0; - down = tb_switch_downstream_port(sw); + /* + * If the link is Gen 4 there is no way to switch the link to + * two single lane links so avoid that here. Also don't bother + * if the link is not up anymore (sw is unplugged). + */ + ret = tb_port_get_link_generation(up); + if (ret < 0) + return ret; + if (ret >= 4) + return -EOPNOTSUPP; + down = tb_switch_downstream_port(sw); tb_port_lane_bonding_disable(up); tb_port_lane_bonding_disable(down); @@ -2791,15 +2877,160 @@ void tb_switch_lane_bonding_disable(struct tb_switch *sw) * It is fine if we get other errors as the router might have * been unplugged. */ - ret = tb_port_wait_for_link_width(down, TB_LINK_WIDTH_SINGLE, 100); - if (ret == -ETIMEDOUT) - tb_sw_warn(sw, "timeout disabling lane bonding\n"); + return tb_port_wait_for_link_width(down, TB_LINK_WIDTH_SINGLE, 100); +} + +static int tb_switch_asym_enable(struct tb_switch *sw, enum tb_link_width width) +{ + struct tb_port *up, *down, *port; + enum tb_link_width down_width; + int ret; + + up = tb_upstream_port(sw); + down = tb_switch_downstream_port(sw); + + if (width == TB_LINK_WIDTH_ASYM_TX) { + down_width = TB_LINK_WIDTH_ASYM_RX; + port = down; + } else { + down_width = TB_LINK_WIDTH_ASYM_TX; + port = up; + } + + ret = tb_port_set_link_width(up, width); + if (ret) + return ret; + + ret = tb_port_set_link_width(down, down_width); + if (ret) + return ret; + + /* + * Initiate the change in the router that one of its TX lanes is + * changing to RX but do so only if there is an actual change. + */ + if (sw->link_width != width) { + ret = usb4_port_asym_start(port); + if (ret) + return ret; + + ret = tb_port_wait_for_link_width(up, width, 100); + if (ret) + return ret; + } + + sw->link_width = width; + return 0; +} + +static int tb_switch_asym_disable(struct tb_switch *sw) +{ + struct tb_port *up, *down; + int ret; + + up = tb_upstream_port(sw); + down = tb_switch_downstream_port(sw); + + ret = tb_port_set_link_width(up, TB_LINK_WIDTH_DUAL); + if (ret) + return ret; + + ret = tb_port_set_link_width(down, TB_LINK_WIDTH_DUAL); + if (ret) + return ret; + + /* + * Initiate the change in the router that has three TX lanes and + * is changing one of its TX lanes to RX but only if there is a + * change in the link width. + */ + if (sw->link_width > TB_LINK_WIDTH_DUAL) { + if (sw->link_width == TB_LINK_WIDTH_ASYM_TX) + ret = usb4_port_asym_start(up); + else + ret = usb4_port_asym_start(down); + if (ret) + return ret; + + ret = tb_port_wait_for_link_width(up, TB_LINK_WIDTH_DUAL, 100); + if (ret) + return ret; + } + + sw->link_width = TB_LINK_WIDTH_DUAL; + return 0; +} + +/** + * tb_switch_set_link_width() - Configure router link width + * @sw: Router to configure + * @width: The new link width + * + * Set device router link width to @width from router upstream port + * perspective. Supports also asymmetric links if the routers boths side + * of the link supports it. + * + * Does nothing for host router. + * + * Returns %0 in case of success, negative errno otherwise. + */ +int tb_switch_set_link_width(struct tb_switch *sw, enum tb_link_width width) +{ + struct tb_port *up, *down; + int ret = 0; + + if (!tb_route(sw)) + return 0; + + up = tb_upstream_port(sw); + down = tb_switch_downstream_port(sw); + + switch (width) { + case TB_LINK_WIDTH_SINGLE: + ret = tb_switch_lane_bonding_disable(sw); + break; + + case TB_LINK_WIDTH_DUAL: + if (sw->link_width == TB_LINK_WIDTH_ASYM_TX || + sw->link_width == TB_LINK_WIDTH_ASYM_RX) { + ret = tb_switch_asym_disable(sw); + if (ret) + break; + } + ret = tb_switch_lane_bonding_enable(sw); + break; + + case TB_LINK_WIDTH_ASYM_TX: + case TB_LINK_WIDTH_ASYM_RX: + ret = tb_switch_asym_enable(sw, width); + break; + } + + switch (ret) { + case 0: + break; + + case -ETIMEDOUT: + tb_sw_warn(sw, "timeout changing link width\n"); + return ret; + + case -ENOTCONN: + case -EOPNOTSUPP: + case -ENODEV: + return ret; + + default: + tb_sw_dbg(sw, "failed to change link width: %d\n", ret); + return ret; + } tb_port_update_credits(down); tb_port_update_credits(up); + tb_switch_update_link_attributes(sw); - tb_sw_dbg(sw, "lane bonding disabled\n"); + tb_sw_dbg(sw, "link width set to %s\n", width_name(width)); + return ret; } /** @@ -2959,6 +3190,8 @@ int tb_switch_add(struct tb_switch *sw) if (ret) return ret; + tb_switch_link_init(sw); + ret = tb_switch_clx_init(sw); if (ret) return ret; diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 27bd6ca6f99e..5acdeb766860 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -16,8 +16,31 @@ #include "tb_regs.h" #include "tunnel.h" -#define TB_TIMEOUT 100 /* ms */ -#define MAX_GROUPS 7 /* max Group_ID is 7 */ +#define TB_TIMEOUT 100 /* ms */ + +/* + * Minimum bandwidth (in Mb/s) that is needed in the single transmitter/receiver + * direction. This is 40G - 10% guard band bandwidth. + */ +#define TB_ASYM_MIN (40000 * 90 / 100) + +/* + * Threshold bandwidth (in Mb/s) that is used to switch the links to + * asymmetric and back. This is selected as 45G which means when the + * request is higher than this, we switch the link to asymmetric, and + * when it is less than this we switch it back. The 45G is selected so + * that we still have 27G (of the total 72G) for bulk PCIe traffic when + * switching back to symmetric. + */ +#define TB_ASYM_THRESHOLD 45000 + +#define MAX_GROUPS 7 /* max Group_ID is 7 */ + +static unsigned int asym_threshold = TB_ASYM_THRESHOLD; +module_param_named(asym_threshold, asym_threshold, uint, 0444); +MODULE_PARM_DESC(asym_threshold, + "threshold (Mb/s) when to Gen 4 switch link symmetry. 0 disables. (default: " + __MODULE_STRING(TB_ASYM_THRESHOLD) ")"); /** * struct tb_cm - Simple Thunderbolt connection manager @@ -190,7 +213,7 @@ static void tb_add_dp_resources(struct tb_switch *sw) if (!tb_switch_query_dp_resource(sw, port)) continue; - list_add_tail(&port->list, &tcm->dp_resources); + list_add(&port->list, &tcm->dp_resources); tb_port_dbg(port, "DP IN resource available\n"); } } @@ -255,13 +278,13 @@ static int tb_enable_clx(struct tb_switch *sw) * this in the future to cover the whole topology if it turns * out to be beneficial. */ - while (sw && sw->config.depth > 1) + while (sw && tb_switch_depth(sw) > 1) sw = tb_switch_parent(sw); if (!sw) return 0; - if (sw->config.depth != 1) + if (tb_switch_depth(sw) != 1) return 0; /* @@ -285,14 +308,32 @@ static int tb_enable_clx(struct tb_switch *sw) return ret == -EOPNOTSUPP ? 0 : ret; } -/* Disables CL states up to the host router */ -static void tb_disable_clx(struct tb_switch *sw) +/** + * tb_disable_clx() - Disable CL states up to host router + * @sw: Router to start + * + * Disables CL states from @sw up to the host router. Returns true if + * any CL state were disabled. This can be used to figure out whether + * the link was setup by us or the boot firmware so we don't + * accidentally enable them if they were not enabled during discovery. + */ +static bool tb_disable_clx(struct tb_switch *sw) { + bool disabled = false; + do { - if (tb_switch_clx_disable(sw) < 0) + int ret; + + ret = tb_switch_clx_disable(sw); + if (ret > 0) + disabled = true; + else if (ret < 0) tb_sw_warn(sw, "failed to disable CL states\n"); + sw = tb_switch_parent(sw); } while (sw); + + return disabled; } static int tb_increase_switch_tmu_accuracy(struct device *dev, void *data) @@ -553,7 +594,7 @@ static struct tb_tunnel *tb_find_first_usb3_tunnel(struct tb *tb, struct tb_switch *sw; /* Pick the router that is deepest in the topology */ - if (dst_port->sw->config.depth > src_port->sw->config.depth) + if (tb_port_path_direction_downstream(src_port, dst_port)) sw = dst_port->sw; else sw = src_port->sw; @@ -572,133 +613,294 @@ static struct tb_tunnel *tb_find_first_usb3_tunnel(struct tb *tb, return tb_find_tunnel(tb, TB_TUNNEL_USB3, usb3_down, NULL); } -static int tb_available_bandwidth(struct tb *tb, struct tb_port *src_port, - struct tb_port *dst_port, int *available_up, int *available_down) -{ - int usb3_consumed_up, usb3_consumed_down, ret; - struct tb_cm *tcm = tb_priv(tb); +/** + * tb_consumed_usb3_pcie_bandwidth() - Consumed USB3/PCIe bandwidth over a single link + * @tb: Domain structure + * @src_port: Source protocol adapter + * @dst_port: Destination protocol adapter + * @port: USB4 port the consumed bandwidth is calculated + * @consumed_up: Consumed upsream bandwidth (Mb/s) + * @consumed_down: Consumed downstream bandwidth (Mb/s) + * + * Calculates consumed USB3 and PCIe bandwidth at @port between path + * from @src_port to @dst_port. Does not take tunnel starting from + * @src_port and ending from @src_port into account. + */ +static int tb_consumed_usb3_pcie_bandwidth(struct tb *tb, + struct tb_port *src_port, + struct tb_port *dst_port, + struct tb_port *port, + int *consumed_up, + int *consumed_down) +{ + int pci_consumed_up, pci_consumed_down; struct tb_tunnel *tunnel; - struct tb_port *port; - tb_dbg(tb, "calculating available bandwidth between %llx:%u <-> %llx:%u\n", - tb_route(src_port->sw), src_port->port, tb_route(dst_port->sw), - dst_port->port); + *consumed_up = *consumed_down = 0; tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port); if (tunnel && tunnel->src_port != src_port && tunnel->dst_port != dst_port) { - ret = tb_tunnel_consumed_bandwidth(tunnel, &usb3_consumed_up, - &usb3_consumed_down); + int ret; + + ret = tb_tunnel_consumed_bandwidth(tunnel, consumed_up, + consumed_down); if (ret) return ret; - } else { - usb3_consumed_up = 0; - usb3_consumed_down = 0; } - /* Maximum possible bandwidth asymmetric Gen 4 link is 120 Gb/s */ - *available_up = *available_down = 120000; + /* + * If there is anything reserved for PCIe bulk traffic take it + * into account here too. + */ + if (tb_tunnel_reserved_pci(port, &pci_consumed_up, &pci_consumed_down)) { + *consumed_up += pci_consumed_up; + *consumed_down += pci_consumed_down; + } - /* Find the minimum available bandwidth over all links */ - tb_for_each_port_on_path(src_port, dst_port, port) { - int link_speed, link_width, up_bw, down_bw; + return 0; +} - if (!tb_port_is_null(port)) +/** + * tb_consumed_dp_bandwidth() - Consumed DP bandwidth over a single link + * @tb: Domain structure + * @src_port: Source protocol adapter + * @dst_port: Destination protocol adapter + * @port: USB4 port the consumed bandwidth is calculated + * @consumed_up: Consumed upsream bandwidth (Mb/s) + * @consumed_down: Consumed downstream bandwidth (Mb/s) + * + * Calculates consumed DP bandwidth at @port between path from @src_port + * to @dst_port. Does not take tunnel starting from @src_port and ending + * from @src_port into account. + */ +static int tb_consumed_dp_bandwidth(struct tb *tb, + struct tb_port *src_port, + struct tb_port *dst_port, + struct tb_port *port, + int *consumed_up, + int *consumed_down) +{ + struct tb_cm *tcm = tb_priv(tb); + struct tb_tunnel *tunnel; + int ret; + + *consumed_up = *consumed_down = 0; + + /* + * Find all DP tunnels that cross the port and reduce + * their consumed bandwidth from the available. + */ + list_for_each_entry(tunnel, &tcm->tunnel_list, list) { + int dp_consumed_up, dp_consumed_down; + + if (tb_tunnel_is_invalid(tunnel)) continue; - if (tb_is_upstream_port(port)) { - link_speed = port->sw->link_speed; + if (!tb_tunnel_is_dp(tunnel)) + continue; + + if (!tb_tunnel_port_on_path(tunnel, port)) + continue; + + /* + * Ignore the DP tunnel between src_port and dst_port + * because it is the same tunnel and we may be + * re-calculating estimated bandwidth. + */ + if (tunnel->src_port == src_port && + tunnel->dst_port == dst_port) + continue; + + ret = tb_tunnel_consumed_bandwidth(tunnel, &dp_consumed_up, + &dp_consumed_down); + if (ret) + return ret; + + *consumed_up += dp_consumed_up; + *consumed_down += dp_consumed_down; + } + + return 0; +} + +static bool tb_asym_supported(struct tb_port *src_port, struct tb_port *dst_port, + struct tb_port *port) +{ + bool downstream = tb_port_path_direction_downstream(src_port, dst_port); + enum tb_link_width width; + + if (tb_is_upstream_port(port)) + width = downstream ? TB_LINK_WIDTH_ASYM_RX : TB_LINK_WIDTH_ASYM_TX; + else + width = downstream ? TB_LINK_WIDTH_ASYM_TX : TB_LINK_WIDTH_ASYM_RX; + + return tb_port_width_supported(port, width); +} + +/** + * tb_maximum_bandwidth() - Maximum bandwidth over a single link + * @tb: Domain structure + * @src_port: Source protocol adapter + * @dst_port: Destination protocol adapter + * @port: USB4 port the total bandwidth is calculated + * @max_up: Maximum upstream bandwidth (Mb/s) + * @max_down: Maximum downstream bandwidth (Mb/s) + * @include_asym: Include bandwidth if the link is switched from + * symmetric to asymmetric + * + * Returns maximum possible bandwidth in @max_up and @max_down over a + * single link at @port. If @include_asym is set then includes the + * additional banwdith if the links are transitioned into asymmetric to + * direction from @src_port to @dst_port. + */ +static int tb_maximum_bandwidth(struct tb *tb, struct tb_port *src_port, + struct tb_port *dst_port, struct tb_port *port, + int *max_up, int *max_down, bool include_asym) +{ + bool downstream = tb_port_path_direction_downstream(src_port, dst_port); + int link_speed, link_width, up_bw, down_bw; + + /* + * Can include asymmetric, only if it is actually supported by + * the lane adapter. + */ + if (!tb_asym_supported(src_port, dst_port, port)) + include_asym = false; + + if (tb_is_upstream_port(port)) { + link_speed = port->sw->link_speed; + /* + * sw->link_width is from upstream perspective so we use + * the opposite for downstream of the host router. + */ + if (port->sw->link_width == TB_LINK_WIDTH_ASYM_TX) { + up_bw = link_speed * 3 * 1000; + down_bw = link_speed * 1 * 1000; + } else if (port->sw->link_width == TB_LINK_WIDTH_ASYM_RX) { + up_bw = link_speed * 1 * 1000; + down_bw = link_speed * 3 * 1000; + } else if (include_asym) { /* - * sw->link_width is from upstream perspective - * so we use the opposite for downstream of the - * host router. + * The link is symmetric at the moment but we + * can switch it to asymmetric as needed. Report + * this bandwidth as available (even though it + * is not yet enabled). */ - if (port->sw->link_width == TB_LINK_WIDTH_ASYM_TX) { - up_bw = link_speed * 3 * 1000; - down_bw = link_speed * 1 * 1000; - } else if (port->sw->link_width == TB_LINK_WIDTH_ASYM_RX) { + if (downstream) { up_bw = link_speed * 1 * 1000; down_bw = link_speed * 3 * 1000; } else { - up_bw = link_speed * port->sw->link_width * 1000; - down_bw = up_bw; + up_bw = link_speed * 3 * 1000; + down_bw = link_speed * 1 * 1000; } } else { - link_speed = tb_port_get_link_speed(port); - if (link_speed < 0) - return link_speed; - - link_width = tb_port_get_link_width(port); - if (link_width < 0) - return link_width; - - if (link_width == TB_LINK_WIDTH_ASYM_TX) { + up_bw = link_speed * port->sw->link_width * 1000; + down_bw = up_bw; + } + } else { + link_speed = tb_port_get_link_speed(port); + if (link_speed < 0) + return link_speed; + + link_width = tb_port_get_link_width(port); + if (link_width < 0) + return link_width; + + if (link_width == TB_LINK_WIDTH_ASYM_TX) { + up_bw = link_speed * 1 * 1000; + down_bw = link_speed * 3 * 1000; + } else if (link_width == TB_LINK_WIDTH_ASYM_RX) { + up_bw = link_speed * 3 * 1000; + down_bw = link_speed * 1 * 1000; + } else if (include_asym) { + /* + * The link is symmetric at the moment but we + * can switch it to asymmetric as needed. Report + * this bandwidth as available (even though it + * is not yet enabled). + */ + if (downstream) { up_bw = link_speed * 1 * 1000; down_bw = link_speed * 3 * 1000; - } else if (link_width == TB_LINK_WIDTH_ASYM_RX) { + } else { up_bw = link_speed * 3 * 1000; down_bw = link_speed * 1 * 1000; - } else { - up_bw = link_speed * link_width * 1000; - down_bw = up_bw; } + } else { + up_bw = link_speed * link_width * 1000; + down_bw = up_bw; } + } - /* Leave 10% guard band */ - up_bw -= up_bw / 10; - down_bw -= down_bw / 10; - - tb_port_dbg(port, "link total bandwidth %d/%d Mb/s\n", up_bw, - down_bw); + /* Leave 10% guard band */ + *max_up = up_bw - up_bw / 10; + *max_down = down_bw - down_bw / 10; - /* - * Find all DP tunnels that cross the port and reduce - * their consumed bandwidth from the available. - */ - list_for_each_entry(tunnel, &tcm->tunnel_list, list) { - int dp_consumed_up, dp_consumed_down; + tb_port_dbg(port, "link maximum bandwidth %d/%d Mb/s\n", *max_up, *max_down); + return 0; +} - if (tb_tunnel_is_invalid(tunnel)) - continue; +/** + * tb_available_bandwidth() - Available bandwidth for tunneling + * @tb: Domain structure + * @src_port: Source protocol adapter + * @dst_port: Destination protocol adapter + * @available_up: Available bandwidth upstream (Mb/s) + * @available_down: Available bandwidth downstream (Mb/s) + * @include_asym: Include bandwidth if the link is switched from + * symmetric to asymmetric + * + * Calculates maximum available bandwidth for protocol tunneling between + * @src_port and @dst_port at the moment. This is minimum of maximum + * link bandwidth across all links reduced by currently consumed + * bandwidth on that link. + * + * If @include_asym is true then includes also bandwidth that can be + * added when the links are transitioned into asymmetric (but does not + * transition the links). + */ +static int tb_available_bandwidth(struct tb *tb, struct tb_port *src_port, + struct tb_port *dst_port, int *available_up, + int *available_down, bool include_asym) +{ + struct tb_port *port; + int ret; - if (!tb_tunnel_is_dp(tunnel)) - continue; + /* Maximum possible bandwidth asymmetric Gen 4 link is 120 Gb/s */ + *available_up = *available_down = 120000; - if (!tb_tunnel_port_on_path(tunnel, port)) - continue; + /* Find the minimum available bandwidth over all links */ + tb_for_each_port_on_path(src_port, dst_port, port) { + int max_up, max_down, consumed_up, consumed_down; - /* - * Ignore the DP tunnel between src_port and - * dst_port because it is the same tunnel and we - * may be re-calculating estimated bandwidth. - */ - if (tunnel->src_port == src_port && - tunnel->dst_port == dst_port) - continue; + if (!tb_port_is_null(port)) + continue; - ret = tb_tunnel_consumed_bandwidth(tunnel, - &dp_consumed_up, - &dp_consumed_down); - if (ret) - return ret; + ret = tb_maximum_bandwidth(tb, src_port, dst_port, port, + &max_up, &max_down, include_asym); + if (ret) + return ret; - up_bw -= dp_consumed_up; - down_bw -= dp_consumed_down; - } + ret = tb_consumed_usb3_pcie_bandwidth(tb, src_port, dst_port, + port, &consumed_up, + &consumed_down); + if (ret) + return ret; + max_up -= consumed_up; + max_down -= consumed_down; - /* - * If USB3 is tunneled from the host router down to the - * branch leading to port we need to take USB3 consumed - * bandwidth into account regardless whether it actually - * crosses the port. - */ - up_bw -= usb3_consumed_up; - down_bw -= usb3_consumed_down; + ret = tb_consumed_dp_bandwidth(tb, src_port, dst_port, port, + &consumed_up, &consumed_down); + if (ret) + return ret; + max_up -= consumed_up; + max_down -= consumed_down; - if (up_bw < *available_up) - *available_up = up_bw; - if (down_bw < *available_down) - *available_down = down_bw; + if (max_up < *available_up) + *available_up = max_up; + if (max_down < *available_down) + *available_down = max_down; } if (*available_up < 0) @@ -729,21 +931,21 @@ static void tb_reclaim_usb3_bandwidth(struct tb *tb, struct tb_port *src_port, if (!tunnel) return; - tb_dbg(tb, "reclaiming unused bandwidth for USB3\n"); + tb_tunnel_dbg(tunnel, "reclaiming unused bandwidth\n"); /* * Calculate available bandwidth for the first hop USB3 tunnel. * That determines the whole USB3 bandwidth for this branch. */ ret = tb_available_bandwidth(tb, tunnel->src_port, tunnel->dst_port, - &available_up, &available_down); + &available_up, &available_down, false); if (ret) { - tb_warn(tb, "failed to calculate available bandwidth\n"); + tb_tunnel_warn(tunnel, "failed to calculate available bandwidth\n"); return; } - tb_dbg(tb, "available bandwidth for USB3 %d/%d Mb/s\n", - available_up, available_down); + tb_tunnel_dbg(tunnel, "available bandwidth %d/%d Mb/s\n", available_up, + available_down); tb_tunnel_reclaim_available_bandwidth(tunnel, &available_up, &available_down); } @@ -794,8 +996,8 @@ static int tb_tunnel_usb3(struct tb *tb, struct tb_switch *sw) return ret; } - ret = tb_available_bandwidth(tb, down, up, &available_up, - &available_down); + ret = tb_available_bandwidth(tb, down, up, &available_up, &available_down, + false); if (ret) goto err_reclaim; @@ -856,6 +1058,225 @@ static int tb_create_usb3_tunnels(struct tb_switch *sw) return 0; } +/** + * tb_configure_asym() - Transition links to asymmetric if needed + * @tb: Domain structure + * @src_port: Source adapter to start the transition + * @dst_port: Destination adapter + * @requested_up: Additional bandwidth (Mb/s) required upstream + * @requested_down: Additional bandwidth (Mb/s) required downstream + * + * Transition links between @src_port and @dst_port into asymmetric, with + * three lanes in the direction from @src_port towards @dst_port and one lane + * in the opposite direction, if the bandwidth requirements + * (requested + currently consumed) on that link exceed @asym_threshold. + * + * Must be called with available >= requested over all links. + */ +static int tb_configure_asym(struct tb *tb, struct tb_port *src_port, + struct tb_port *dst_port, int requested_up, + int requested_down) +{ + struct tb_switch *sw; + bool clx, downstream; + struct tb_port *up; + int ret = 0; + + if (!asym_threshold) + return 0; + + /* Disable CL states before doing any transitions */ + downstream = tb_port_path_direction_downstream(src_port, dst_port); + /* Pick up router deepest in the hierarchy */ + if (downstream) + sw = dst_port->sw; + else + sw = src_port->sw; + + clx = tb_disable_clx(sw); + + tb_for_each_upstream_port_on_path(src_port, dst_port, up) { + int consumed_up, consumed_down; + enum tb_link_width width; + + ret = tb_consumed_dp_bandwidth(tb, src_port, dst_port, up, + &consumed_up, &consumed_down); + if (ret) + break; + + if (downstream) { + /* + * Downstream so make sure upstream is within the 36G + * (40G - guard band 10%), and the requested is above + * what the threshold is. + */ + if (consumed_up + requested_up >= TB_ASYM_MIN) { + ret = -ENOBUFS; + break; + } + /* Does consumed + requested exceed the threshold */ + if (consumed_down + requested_down < asym_threshold) + continue; + + width = TB_LINK_WIDTH_ASYM_RX; + } else { + /* Upstream, the opposite of above */ + if (consumed_down + requested_down >= TB_ASYM_MIN) { + ret = -ENOBUFS; + break; + } + if (consumed_up + requested_up < asym_threshold) + continue; + + width = TB_LINK_WIDTH_ASYM_TX; + } + + if (up->sw->link_width == width) + continue; + + if (!tb_port_width_supported(up, width)) + continue; + + tb_sw_dbg(up->sw, "configuring asymmetric link\n"); + + /* + * Here requested + consumed > threshold so we need to + * transtion the link into asymmetric now. + */ + ret = tb_switch_set_link_width(up->sw, width); + if (ret) { + tb_sw_warn(up->sw, "failed to set link width\n"); + break; + } + } + + /* Re-enable CL states if they were previosly enabled */ + if (clx) + tb_enable_clx(sw); + + return ret; +} + +/** + * tb_configure_sym() - Transition links to symmetric if possible + * @tb: Domain structure + * @src_port: Source adapter to start the transition + * @dst_port: Destination adapter + * @requested_up: New lower bandwidth request upstream (Mb/s) + * @requested_down: New lower bandwidth request downstream (Mb/s) + * + * Goes over each link from @src_port to @dst_port and tries to + * transition the link to symmetric if the currently consumed bandwidth + * allows. + */ +static int tb_configure_sym(struct tb *tb, struct tb_port *src_port, + struct tb_port *dst_port, int requested_up, + int requested_down) +{ + struct tb_switch *sw; + bool clx, downstream; + struct tb_port *up; + int ret = 0; + + if (!asym_threshold) + return 0; + + /* Disable CL states before doing any transitions */ + downstream = tb_port_path_direction_downstream(src_port, dst_port); + /* Pick up router deepest in the hierarchy */ + if (downstream) + sw = dst_port->sw; + else + sw = src_port->sw; + + clx = tb_disable_clx(sw); + + tb_for_each_upstream_port_on_path(src_port, dst_port, up) { + int consumed_up, consumed_down; + + /* Already symmetric */ + if (up->sw->link_width <= TB_LINK_WIDTH_DUAL) + continue; + /* Unplugged, no need to switch */ + if (up->sw->is_unplugged) + continue; + + ret = tb_consumed_dp_bandwidth(tb, src_port, dst_port, up, + &consumed_up, &consumed_down); + if (ret) + break; + + if (downstream) { + /* + * Downstream so we want the consumed_down < threshold. + * Upstream traffic should be less than 36G (40G + * guard band 10%) as the link was configured asymmetric + * already. + */ + if (consumed_down + requested_down >= asym_threshold) + continue; + } else { + if (consumed_up + requested_up >= asym_threshold) + continue; + } + + if (up->sw->link_width == TB_LINK_WIDTH_DUAL) + continue; + + tb_sw_dbg(up->sw, "configuring symmetric link\n"); + + ret = tb_switch_set_link_width(up->sw, TB_LINK_WIDTH_DUAL); + if (ret) { + tb_sw_warn(up->sw, "failed to set link width\n"); + break; + } + } + + /* Re-enable CL states if they were previosly enabled */ + if (clx) + tb_enable_clx(sw); + + return ret; +} + +static void tb_configure_link(struct tb_port *down, struct tb_port *up, + struct tb_switch *sw) +{ + struct tb *tb = sw->tb; + + /* Link the routers using both links if available */ + down->remote = up; + up->remote = down; + if (down->dual_link_port && up->dual_link_port) { + down->dual_link_port->remote = up->dual_link_port; + up->dual_link_port->remote = down->dual_link_port; + } + + /* + * Enable lane bonding if the link is currently two single lane + * links. + */ + if (sw->link_width < TB_LINK_WIDTH_DUAL) + tb_switch_set_link_width(sw, TB_LINK_WIDTH_DUAL); + + /* + * Device router that comes up as symmetric link is + * connected deeper in the hierarchy, we transition the links + * above into symmetric if bandwidth allows. + */ + if (tb_switch_depth(sw) > 1 && + tb_port_get_link_generation(up) >= 4 && + up->sw->link_width == TB_LINK_WIDTH_DUAL) { + struct tb_port *host_port; + + host_port = tb_port_at(tb_route(sw), tb->root_switch); + tb_configure_sym(tb, host_port, up, 0, 0); + } + + /* Set the link configured */ + tb_switch_configure_link(sw); +} + static void tb_scan_port(struct tb_port *port); /* @@ -964,19 +1385,9 @@ static void tb_scan_port(struct tb_port *port) goto out_rpm_put; } - /* Link the switches using both links if available */ upstream_port = tb_upstream_port(sw); - port->remote = upstream_port; - upstream_port->remote = port; - if (port->dual_link_port && upstream_port->dual_link_port) { - port->dual_link_port->remote = upstream_port->dual_link_port; - upstream_port->dual_link_port->remote = port->dual_link_port; - } + tb_configure_link(port, upstream_port, sw); - /* Enable lane bonding if supported */ - tb_switch_lane_bonding_enable(sw); - /* Set the link configured */ - tb_switch_configure_link(sw); /* * CL0s and CL1 are enabled and supported together. * Silently ignore CLx enabling in case CLx is not supported. @@ -1040,6 +1451,11 @@ static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) * deallocated properly. */ tb_switch_dealloc_dp_resource(src_port->sw, src_port); + /* + * If bandwidth on a link is < asym_threshold + * transition the link to symmetric. + */ + tb_configure_sym(tb, src_port, dst_port, 0, 0); /* Now we can allow the domain to runtime suspend again */ pm_runtime_mark_last_busy(&dst_port->sw->dev); pm_runtime_put_autosuspend(&dst_port->sw->dev); @@ -1092,7 +1508,8 @@ static void tb_free_unplugged_children(struct tb_switch *sw) tb_retimer_remove_all(port); tb_remove_dp_resources(port->remote->sw); tb_switch_unconfigure_link(port->remote->sw); - tb_switch_lane_bonding_disable(port->remote->sw); + tb_switch_set_link_width(port->remote->sw, + TB_LINK_WIDTH_SINGLE); tb_switch_remove(port->remote->sw); port->remote = NULL; if (port->dual_link_port) @@ -1188,7 +1605,7 @@ tb_recalc_estimated_bandwidth_for_group(struct tb_bandwidth_group *group) ret = tb_release_unused_usb3_bandwidth(tb, first_tunnel->src_port, first_tunnel->dst_port); if (ret) { - tb_port_warn(in, + tb_tunnel_warn(tunnel, "failed to release unused bandwidth\n"); break; } @@ -1196,9 +1613,9 @@ tb_recalc_estimated_bandwidth_for_group(struct tb_bandwidth_group *group) out = tunnel->dst_port; ret = tb_available_bandwidth(tb, in, out, &estimated_up, - &estimated_down); + &estimated_down, true); if (ret) { - tb_port_warn(in, + tb_tunnel_warn(tunnel, "failed to re-calculate estimated bandwidth\n"); break; } @@ -1209,16 +1626,18 @@ tb_recalc_estimated_bandwidth_for_group(struct tb_bandwidth_group *group) * - available bandwidth along the path * - bandwidth allocated for USB 3.x but not used. */ - tb_port_dbg(in, "re-calculated estimated bandwidth %u/%u Mb/s\n", - estimated_up, estimated_down); + tb_tunnel_dbg(tunnel, + "re-calculated estimated bandwidth %u/%u Mb/s\n", + estimated_up, estimated_down); - if (in->sw->config.depth < out->sw->config.depth) + if (tb_port_path_direction_downstream(in, out)) estimated_bw = estimated_down; else estimated_bw = estimated_up; if (usb4_dp_port_set_estimated_bandwidth(in, estimated_bw)) - tb_port_warn(in, "failed to update estimated bandwidth\n"); + tb_tunnel_warn(tunnel, + "failed to update estimated bandwidth\n"); } if (first_tunnel) @@ -1282,18 +1701,14 @@ static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in) return NULL; } -static void tb_tunnel_dp(struct tb *tb) +static bool tb_tunnel_one_dp(struct tb *tb) { int available_up, available_down, ret, link_nr; struct tb_cm *tcm = tb_priv(tb); struct tb_port *port, *in, *out; + int consumed_up, consumed_down; struct tb_tunnel *tunnel; - if (!tb_acpi_may_tunnel_dp()) { - tb_dbg(tb, "DP tunneling disabled, not creating tunnel\n"); - return; - } - /* * Find pair of inactive DP IN and DP OUT adapters and then * establish a DP tunnel between them. @@ -1311,22 +1726,21 @@ static void tb_tunnel_dp(struct tb *tb) continue; } - tb_port_dbg(port, "DP IN available\n"); + in = port; + tb_port_dbg(in, "DP IN available\n"); out = tb_find_dp_out(tb, port); - if (out) { - in = port; + if (out) break; - } } if (!in) { tb_dbg(tb, "no suitable DP IN adapter available, not tunneling\n"); - return; + return false; } if (!out) { tb_dbg(tb, "no suitable DP OUT adapter available, not tunneling\n"); - return; + return false; } /* @@ -1369,7 +1783,8 @@ static void tb_tunnel_dp(struct tb *tb) goto err_detach_group; } - ret = tb_available_bandwidth(tb, in, out, &available_up, &available_down); + ret = tb_available_bandwidth(tb, in, out, &available_up, &available_down, + true); if (ret) goto err_reclaim_usb; @@ -1391,6 +1806,13 @@ static void tb_tunnel_dp(struct tb *tb) list_add_tail(&tunnel->list, &tcm->tunnel_list); tb_reclaim_usb3_bandwidth(tb, in, out); + /* + * Transition the links to asymmetric if the consumption exceeds + * the threshold. + */ + if (!tb_tunnel_consumed_bandwidth(tunnel, &consumed_up, &consumed_down)) + tb_configure_asym(tb, in, out, consumed_up, consumed_down); + /* Update the domain with the new bandwidth estimation */ tb_recalc_estimated_bandwidth(tb); @@ -1399,7 +1821,7 @@ static void tb_tunnel_dp(struct tb *tb) * TMU mode to HiFi for CL0s to work. */ tb_increase_tmu_accuracy(tunnel); - return; + return true; err_free: tb_tunnel_free(tunnel); @@ -1414,6 +1836,19 @@ err_rpm_put: pm_runtime_put_autosuspend(&out->sw->dev); pm_runtime_mark_last_busy(&in->sw->dev); pm_runtime_put_autosuspend(&in->sw->dev); + + return false; +} + +static void tb_tunnel_dp(struct tb *tb) +{ + if (!tb_acpi_may_tunnel_dp()) { + tb_dbg(tb, "DP tunneling disabled, not creating tunnel\n"); + return; + } + + while (tb_tunnel_one_dp(tb)) + ; } static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port) @@ -1701,7 +2136,8 @@ static void tb_handle_hotplug(struct work_struct *work) tb_remove_dp_resources(port->remote->sw); tb_switch_tmu_disable(port->remote->sw); tb_switch_unconfigure_link(port->remote->sw); - tb_switch_lane_bonding_disable(port->remote->sw); + tb_switch_set_link_width(port->remote->sw, + TB_LINK_WIDTH_SINGLE); tb_switch_remove(port->remote->sw); port->remote = NULL; if (port->dual_link_port) @@ -1781,8 +2217,8 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, in = tunnel->src_port; out = tunnel->dst_port; - tb_port_dbg(in, "bandwidth allocated currently %d/%d Mb/s\n", - allocated_up, allocated_down); + tb_tunnel_dbg(tunnel, "bandwidth allocated currently %d/%d Mb/s\n", + allocated_up, allocated_down); /* * If we get rounded up request from graphics side, say HBR2 x 4 @@ -1823,20 +2259,26 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, else if (requested_down_corrected < 0) requested_down_corrected = 0; - tb_port_dbg(in, "corrected bandwidth request %d/%d Mb/s\n", - requested_up_corrected, requested_down_corrected); + tb_tunnel_dbg(tunnel, "corrected bandwidth request %d/%d Mb/s\n", + requested_up_corrected, requested_down_corrected); if ((*requested_up >= 0 && requested_up_corrected > max_up_rounded) || (*requested_down >= 0 && requested_down_corrected > max_down_rounded)) { - tb_port_dbg(in, "bandwidth request too high (%d/%d Mb/s > %d/%d Mb/s)\n", - requested_up_corrected, requested_down_corrected, - max_up_rounded, max_down_rounded); + tb_tunnel_dbg(tunnel, + "bandwidth request too high (%d/%d Mb/s > %d/%d Mb/s)\n", + requested_up_corrected, requested_down_corrected, + max_up_rounded, max_down_rounded); return -ENOBUFS; } if ((*requested_up >= 0 && requested_up_corrected <= allocated_up) || (*requested_down >= 0 && requested_down_corrected <= allocated_down)) { /* + * If bandwidth on a link is < asym_threshold transition + * the link to symmetric. + */ + tb_configure_sym(tb, in, out, *requested_up, *requested_down); + /* * If requested bandwidth is less or equal than what is * currently allocated to that tunnel we simply change * the reservation of the tunnel. Since all the tunnels @@ -1861,17 +2303,33 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, * are also in the same group but we use the same function here * that we use with the normal bandwidth allocation). */ - ret = tb_available_bandwidth(tb, in, out, &available_up, &available_down); + ret = tb_available_bandwidth(tb, in, out, &available_up, &available_down, + true); if (ret) goto reclaim; - tb_port_dbg(in, "bandwidth available for allocation %d/%d Mb/s\n", - available_up, available_down); + tb_tunnel_dbg(tunnel, "bandwidth available for allocation %d/%d Mb/s\n", + available_up, available_down); if ((*requested_up >= 0 && available_up >= requested_up_corrected) || (*requested_down >= 0 && available_down >= requested_down_corrected)) { + /* + * If bandwidth on a link is >= asym_threshold + * transition the link to asymmetric. + */ + ret = tb_configure_asym(tb, in, out, *requested_up, + *requested_down); + if (ret) { + tb_configure_sym(tb, in, out, 0, 0); + return ret; + } + ret = tb_tunnel_alloc_bandwidth(tunnel, requested_up, requested_down); + if (ret) { + tb_tunnel_warn(tunnel, "failed to allocate bandwidth\n"); + tb_configure_sym(tb, in, out, 0, 0); + } } else { ret = -ENOBUFS; } @@ -1937,7 +2395,7 @@ static void tb_handle_dp_bandwidth_request(struct work_struct *work) out = tunnel->dst_port; - if (in->sw->config.depth < out->sw->config.depth) { + if (tb_port_path_direction_downstream(in, out)) { requested_up = -1; requested_down = requested_bw; } else { @@ -1948,12 +2406,15 @@ static void tb_handle_dp_bandwidth_request(struct work_struct *work) ret = tb_alloc_dp_bandwidth(tunnel, &requested_up, &requested_down); if (ret) { if (ret == -ENOBUFS) - tb_port_warn(in, "not enough bandwidth available\n"); + tb_tunnel_warn(tunnel, + "not enough bandwidth available\n"); else - tb_port_warn(in, "failed to change bandwidth allocation\n"); + tb_tunnel_warn(tunnel, + "failed to change bandwidth allocation\n"); } else { - tb_port_dbg(in, "bandwidth allocation changed to %d/%d Mb/s\n", - requested_up, requested_down); + tb_tunnel_dbg(tunnel, + "bandwidth allocation changed to %d/%d Mb/s\n", + requested_up, requested_down); /* Update other clients about the allocation change */ tb_recalc_estimated_bandwidth(tb); @@ -2181,7 +2642,8 @@ static void tb_restore_children(struct tb_switch *sw) continue; if (port->remote) { - tb_switch_lane_bonding_enable(port->remote->sw); + tb_switch_set_link_width(port->remote->sw, + port->remote->sw->link_width); tb_switch_configure_link(port->remote->sw); tb_restore_children(port->remote->sw); diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index d2a55ad2fd3e..e299e53473ae 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -162,11 +162,6 @@ struct tb_switch_tmu { * switches) you need to have domain lock held. * * In USB4 terminology this structure represents a router. - * - * Note @link_width is not the same as whether link is bonded or not. - * For Gen 4 links the link is also bonded when it is asymmetric. The - * correct way to find out whether the link is bonded or not is to look - * @bonded field of the upstream port. */ struct tb_switch { struct device dev; @@ -348,6 +343,7 @@ struct tb_retimer { * the path * @nfc_credits: Number of non-flow controlled buffers allocated for the * @in_port. + * @pm_support: Set path PM packet support bit to 1 (for USB4 v2 routers) * * Hop configuration is always done on the IN port of a switch. * in_port and out_port have to be on the same switch. Packets arriving on @@ -368,6 +364,7 @@ struct tb_path_hop { int next_hop_index; unsigned int initial_credits; unsigned int nfc_credits; + bool pm_support; }; /** @@ -864,6 +861,15 @@ static inline struct tb_port *tb_switch_downstream_port(struct tb_switch *sw) return tb_port_at(tb_route(sw), tb_switch_parent(sw)); } +/** + * tb_switch_depth() - Returns depth of the connected router + * @sw: Router + */ +static inline int tb_switch_depth(const struct tb_switch *sw) +{ + return sw->config.depth; +} + static inline bool tb_switch_is_light_ridge(const struct tb_switch *sw) { return sw->config.vendor_id == PCI_VENDOR_ID_INTEL && @@ -956,8 +962,7 @@ static inline bool tb_switch_is_icm(const struct tb_switch *sw) return !sw->config.enabled; } -int tb_switch_lane_bonding_enable(struct tb_switch *sw); -void tb_switch_lane_bonding_disable(struct tb_switch *sw); +int tb_switch_set_link_width(struct tb_switch *sw, enum tb_link_width width); int tb_switch_configure_link(struct tb_switch *sw); void tb_switch_unconfigure_link(struct tb_switch *sw); @@ -1001,7 +1006,6 @@ static inline bool tb_switch_tmu_is_enabled(const struct tb_switch *sw) bool tb_port_clx_is_enabled(struct tb_port *port, unsigned int clx); int tb_switch_clx_init(struct tb_switch *sw); -bool tb_switch_clx_is_supported(const struct tb_switch *sw); int tb_switch_clx_enable(struct tb_switch *sw, unsigned int clx); int tb_switch_clx_disable(struct tb_switch *sw); @@ -1040,6 +1044,21 @@ void tb_port_release_out_hopid(struct tb_port *port, int hopid); struct tb_port *tb_next_port_on_path(struct tb_port *start, struct tb_port *end, struct tb_port *prev); +/** + * tb_port_path_direction_downstream() - Checks if path directed downstream + * @src: Source adapter + * @dst: Destination adapter + * + * Returns %true only if the specified path from source adapter (@src) + * to destination adapter (@dst) is directed downstream. + */ +static inline bool +tb_port_path_direction_downstream(const struct tb_port *src, + const struct tb_port *dst) +{ + return src->sw->config.depth < dst->sw->config.depth; +} + static inline bool tb_port_use_credit_allocation(const struct tb_port *port) { return tb_port_is_null(port) && port->sw->credit_allocation; @@ -1057,12 +1076,29 @@ static inline bool tb_port_use_credit_allocation(const struct tb_port *port) for ((p) = tb_next_port_on_path((src), (dst), NULL); (p); \ (p) = tb_next_port_on_path((src), (dst), (p))) +/** + * tb_for_each_upstream_port_on_path() - Iterate over each upstreamm port on path + * @src: Source port + * @dst: Destination port + * @p: Port used as iterator + * + * Walks over each upstream lane adapter on path from @src to @dst. + */ +#define tb_for_each_upstream_port_on_path(src, dst, p) \ + for ((p) = tb_next_port_on_path((src), (dst), NULL); (p); \ + (p) = tb_next_port_on_path((src), (dst), (p))) \ + if (!tb_port_is_null((p)) || !tb_is_upstream_port((p))) {\ + continue; \ + } else + int tb_port_get_link_speed(struct tb_port *port); +int tb_port_get_link_generation(struct tb_port *port); int tb_port_get_link_width(struct tb_port *port); +bool tb_port_width_supported(struct tb_port *port, unsigned int width); int tb_port_set_link_width(struct tb_port *port, enum tb_link_width width); int tb_port_lane_bonding_enable(struct tb_port *port); void tb_port_lane_bonding_disable(struct tb_port *port); -int tb_port_wait_for_link_width(struct tb_port *port, unsigned int width_mask, +int tb_port_wait_for_link_width(struct tb_port *port, unsigned int width, int timeout_msec); int tb_port_update_credits(struct tb_port *port); @@ -1256,6 +1292,11 @@ int usb4_port_router_online(struct tb_port *port); int usb4_port_enumerate_retimers(struct tb_port *port); bool usb4_port_clx_supported(struct tb_port *port); int usb4_port_margining_caps(struct tb_port *port, u32 *caps); + +bool usb4_port_asym_supported(struct tb_port *port); +int usb4_port_asym_set_link_width(struct tb_port *port, enum tb_link_width width); +int usb4_port_asym_start(struct tb_port *port); + int usb4_port_hw_margin(struct tb_port *port, unsigned int lanes, unsigned int ber_level, bool timing, bool right_high, u32 *results); @@ -1283,7 +1324,6 @@ int usb4_port_retimer_nvm_read(struct tb_port *port, u8 index, unsigned int address, void *buf, size_t size); int usb4_usb3_port_max_link_rate(struct tb_port *port); -int usb4_usb3_port_actual_link_rate(struct tb_port *port); int usb4_usb3_port_allocated_bandwidth(struct tb_port *port, int *upstream_bw, int *downstream_bw); int usb4_usb3_port_allocate_bandwidth(struct tb_port *port, int *upstream_bw, diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index cf9f2370878a..87e4795275fe 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -346,10 +346,14 @@ struct tb_regs_port_header { #define LANE_ADP_CS_1 0x01 #define LANE_ADP_CS_1_TARGET_SPEED_MASK GENMASK(3, 0) #define LANE_ADP_CS_1_TARGET_SPEED_GEN3 0xc -#define LANE_ADP_CS_1_TARGET_WIDTH_MASK GENMASK(9, 4) +#define LANE_ADP_CS_1_TARGET_WIDTH_MASK GENMASK(5, 4) #define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT 4 #define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE 0x1 #define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3 +#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_MASK GENMASK(7, 6) +#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_TX 0x1 +#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_RX 0x2 +#define LANE_ADP_CS_1_TARGET_WIDTH_ASYM_DUAL 0x0 #define LANE_ADP_CS_1_CL0S_ENABLE BIT(10) #define LANE_ADP_CS_1_CL1_ENABLE BIT(11) #define LANE_ADP_CS_1_CL2_ENABLE BIT(12) @@ -382,12 +386,15 @@ struct tb_regs_port_header { #define PORT_CS_18_WOCS BIT(16) #define PORT_CS_18_WODS BIT(17) #define PORT_CS_18_WOU4S BIT(18) +#define PORT_CS_18_CSA BIT(22) +#define PORT_CS_18_TIP BIT(24) #define PORT_CS_19 0x13 #define PORT_CS_19_PC BIT(3) #define PORT_CS_19_PID BIT(4) #define PORT_CS_19_WOC BIT(16) #define PORT_CS_19_WOD BIT(17) #define PORT_CS_19_WOU4 BIT(18) +#define PORT_CS_19_START_ASYM BIT(24) /* Display Port adapter registers */ #define ADP_DP_CS_0 0x00 @@ -400,7 +407,7 @@ struct tb_regs_port_header { #define ADP_DP_CS_1_AUX_RX_HOPID_SHIFT 11 #define ADP_DP_CS_2 0x02 #define ADP_DP_CS_2_NRD_MLC_MASK GENMASK(2, 0) -#define ADP_DP_CS_2_HDP BIT(6) +#define ADP_DP_CS_2_HPD BIT(6) #define ADP_DP_CS_2_NRD_MLR_MASK GENMASK(9, 7) #define ADP_DP_CS_2_NRD_MLR_SHIFT 7 #define ADP_DP_CS_2_CA BIT(10) @@ -417,7 +424,7 @@ struct tb_regs_port_header { #define ADP_DP_CS_2_ESTIMATED_BW_MASK GENMASK(31, 24) #define ADP_DP_CS_2_ESTIMATED_BW_SHIFT 24 #define ADP_DP_CS_3 0x03 -#define ADP_DP_CS_3_HDPC BIT(9) +#define ADP_DP_CS_3_HPDC BIT(9) #define DP_LOCAL_CAP 0x04 #define DP_REMOTE_CAP 0x05 /* For DP IN adapter */ @@ -484,9 +491,6 @@ struct tb_regs_port_header { #define ADP_USB3_CS_3 0x03 #define ADP_USB3_CS_3_SCALE_MASK GENMASK(5, 0) #define ADP_USB3_CS_4 0x04 -#define ADP_USB3_CS_4_ALR_MASK GENMASK(6, 0) -#define ADP_USB3_CS_4_ALR_20G 0x1 -#define ADP_USB3_CS_4_ULV BIT(7) #define ADP_USB3_CS_4_MSLR_MASK GENMASK(18, 12) #define ADP_USB3_CS_4_MSLR_SHIFT 12 #define ADP_USB3_CS_4_MSLR_20G 0x1 @@ -499,7 +503,8 @@ struct tb_regs_hop { * out_port (on the incoming port of the next switch) */ u32 out_port:6; /* next port of the path (on the same switch) */ - u32 initial_credits:8; + u32 initial_credits:7; + u32 pmps:1; u32 unknown1:6; /* set to zero */ bool enable:1; diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index a6810fb36860..7534cd3a81f4 100644 --- a/drivers/thunderbolt/tunnel.c +++ b/drivers/thunderbolt/tunnel.c @@ -21,12 +21,18 @@ #define TB_PCI_PATH_DOWN 0 #define TB_PCI_PATH_UP 1 +#define TB_PCI_PRIORITY 3 +#define TB_PCI_WEIGHT 1 + /* USB3 adapters use always HopID of 8 for both directions */ #define TB_USB3_HOPID 8 #define TB_USB3_PATH_DOWN 0 #define TB_USB3_PATH_UP 1 +#define TB_USB3_PRIORITY 3 +#define TB_USB3_WEIGHT 2 + /* DP adapters use HopID 8 for AUX and 9 for Video */ #define TB_DP_AUX_TX_HOPID 8 #define TB_DP_AUX_RX_HOPID 8 @@ -36,6 +42,12 @@ #define TB_DP_AUX_PATH_OUT 1 #define TB_DP_AUX_PATH_IN 2 +#define TB_DP_VIDEO_PRIORITY 1 +#define TB_DP_VIDEO_WEIGHT 1 + +#define TB_DP_AUX_PRIORITY 2 +#define TB_DP_AUX_WEIGHT 1 + /* Minimum number of credits needed for PCIe path */ #define TB_MIN_PCIE_CREDITS 6U /* @@ -46,6 +58,18 @@ /* Minimum number of credits for DMA path */ #define TB_MIN_DMA_CREDITS 1 +#define TB_DMA_PRIORITY 5 +#define TB_DMA_WEIGHT 1 + +/* + * Reserve additional bandwidth for USB 3.x and PCIe bulk traffic + * according to USB4 v2 Connection Manager guide. This ends up reserving + * 1500 Mb/s for PCIe and 3000 Mb/s for USB 3.x taking weights into + * account. + */ +#define USB4_V2_PCI_MIN_BANDWIDTH (1500 * TB_PCI_WEIGHT) +#define USB4_V2_USB3_MIN_BANDWIDTH (1500 * TB_USB3_WEIGHT) + static unsigned int dma_credits = TB_DMA_CREDITS; module_param(dma_credits, uint, 0444); MODULE_PARM_DESC(dma_credits, "specify custom credits for DMA tunnels (default: " @@ -58,27 +82,6 @@ MODULE_PARM_DESC(bw_alloc_mode, static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA", "USB3" }; -#define __TB_TUNNEL_PRINT(level, tunnel, fmt, arg...) \ - do { \ - struct tb_tunnel *__tunnel = (tunnel); \ - level(__tunnel->tb, "%llx:%u <-> %llx:%u (%s): " fmt, \ - tb_route(__tunnel->src_port->sw), \ - __tunnel->src_port->port, \ - tb_route(__tunnel->dst_port->sw), \ - __tunnel->dst_port->port, \ - tb_tunnel_names[__tunnel->type], \ - ## arg); \ - } while (0) - -#define tb_tunnel_WARN(tunnel, fmt, arg...) \ - __TB_TUNNEL_PRINT(tb_WARN, tunnel, fmt, ##arg) -#define tb_tunnel_warn(tunnel, fmt, arg...) \ - __TB_TUNNEL_PRINT(tb_warn, tunnel, fmt, ##arg) -#define tb_tunnel_info(tunnel, fmt, arg...) \ - __TB_TUNNEL_PRINT(tb_info, tunnel, fmt, ##arg) -#define tb_tunnel_dbg(tunnel, fmt, arg...) \ - __TB_TUNNEL_PRINT(tb_dbg, tunnel, fmt, ##arg) - static inline unsigned int tb_usable_credits(const struct tb_port *port) { return port->total_credits - port->ctl_credits; @@ -131,6 +134,16 @@ static unsigned int tb_available_credits(const struct tb_port *port, return credits > 0 ? credits : 0; } +static void tb_init_pm_support(struct tb_path_hop *hop) +{ + struct tb_port *out_port = hop->out_port; + struct tb_port *in_port = hop->in_port; + + if (tb_port_is_null(in_port) && tb_port_is_null(out_port) && + usb4_switch_version(in_port->sw) >= 2) + hop->pm_support = true; +} + static struct tb_tunnel *tb_tunnel_alloc(struct tb *tb, size_t npaths, enum tb_tunnel_type type) { @@ -156,11 +169,11 @@ static struct tb_tunnel *tb_tunnel_alloc(struct tb *tb, size_t npaths, static int tb_pci_set_ext_encapsulation(struct tb_tunnel *tunnel, bool enable) { + struct tb_port *port = tb_upstream_port(tunnel->dst_port->sw); int ret; /* Only supported of both routers are at least USB4 v2 */ - if (usb4_switch_version(tunnel->src_port->sw) < 2 || - usb4_switch_version(tunnel->dst_port->sw) < 2) + if (tb_port_get_link_generation(port) < 4) return 0; ret = usb4_pci_port_set_ext_encapsulation(tunnel->src_port, enable); @@ -234,8 +247,8 @@ static int tb_pci_init_path(struct tb_path *path) path->egress_shared_buffer = TB_PATH_NONE; path->ingress_fc_enable = TB_PATH_ALL; path->ingress_shared_buffer = TB_PATH_NONE; - path->priority = 3; - path->weight = 1; + path->priority = TB_PCI_PRIORITY; + path->weight = TB_PCI_WEIGHT; path->drop_packages = 0; tb_path_for_each_hop(path, hop) { @@ -376,6 +389,51 @@ err_free: return NULL; } +/** + * tb_tunnel_reserved_pci() - Amount of bandwidth to reserve for PCIe + * @port: Lane 0 adapter + * @reserved_up: Upstream bandwidth in Mb/s to reserve + * @reserved_down: Downstream bandwidth in Mb/s to reserve + * + * Can be called to any connected lane 0 adapter to find out how much + * bandwidth needs to be left in reserve for possible PCIe bulk traffic. + * Returns true if there is something to be reserved and writes the + * amount to @reserved_down/@reserved_up. Otherwise returns false and + * does not touch the parameters. + */ +bool tb_tunnel_reserved_pci(struct tb_port *port, int *reserved_up, + int *reserved_down) +{ + if (WARN_ON_ONCE(!port->remote)) + return false; + + if (!tb_acpi_may_tunnel_pcie()) + return false; + + if (tb_port_get_link_generation(port) < 4) + return false; + + /* Must have PCIe adapters */ + if (tb_is_upstream_port(port)) { + if (!tb_switch_find_port(port->sw, TB_TYPE_PCIE_UP)) + return false; + if (!tb_switch_find_port(port->remote->sw, TB_TYPE_PCIE_DOWN)) + return false; + } else { + if (!tb_switch_find_port(port->sw, TB_TYPE_PCIE_DOWN)) + return false; + if (!tb_switch_find_port(port->remote->sw, TB_TYPE_PCIE_UP)) + return false; + } + + *reserved_up = USB4_V2_PCI_MIN_BANDWIDTH; + *reserved_down = USB4_V2_PCI_MIN_BANDWIDTH; + + tb_port_dbg(port, "reserving %u/%u Mb/s for PCIe\n", *reserved_up, + *reserved_down); + return true; +} + static bool tb_dp_is_usb4(const struct tb_switch *sw) { /* Titan Ridge DP adapters need the same treatment as USB4 */ @@ -614,8 +672,9 @@ static int tb_dp_xchg_caps(struct tb_tunnel *tunnel) in_rate = tb_dp_cap_get_rate(in_dp_cap); in_lanes = tb_dp_cap_get_lanes(in_dp_cap); - tb_port_dbg(in, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", - in_rate, in_lanes, tb_dp_bandwidth(in_rate, in_lanes)); + tb_tunnel_dbg(tunnel, + "DP IN maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + in_rate, in_lanes, tb_dp_bandwidth(in_rate, in_lanes)); /* * If the tunnel bandwidth is limited (max_bw is set) then see @@ -624,10 +683,11 @@ static int tb_dp_xchg_caps(struct tb_tunnel *tunnel) out_rate = tb_dp_cap_get_rate(out_dp_cap); out_lanes = tb_dp_cap_get_lanes(out_dp_cap); bw = tb_dp_bandwidth(out_rate, out_lanes); - tb_port_dbg(out, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", - out_rate, out_lanes, bw); + tb_tunnel_dbg(tunnel, + "DP OUT maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + out_rate, out_lanes, bw); - if (in->sw->config.depth < out->sw->config.depth) + if (tb_port_path_direction_downstream(in, out)) max_bw = tunnel->max_down; else max_bw = tunnel->max_up; @@ -639,13 +699,14 @@ static int tb_dp_xchg_caps(struct tb_tunnel *tunnel) out_rate, out_lanes, &new_rate, &new_lanes); if (ret) { - tb_port_info(out, "not enough bandwidth for DP tunnel\n"); + tb_tunnel_info(tunnel, "not enough bandwidth\n"); return ret; } new_bw = tb_dp_bandwidth(new_rate, new_lanes); - tb_port_dbg(out, "bandwidth reduced to %u Mb/s x%u = %u Mb/s\n", - new_rate, new_lanes, new_bw); + tb_tunnel_dbg(tunnel, + "bandwidth reduced to %u Mb/s x%u = %u Mb/s\n", + new_rate, new_lanes, new_bw); /* * Set new rate and number of lanes before writing it to @@ -662,7 +723,7 @@ static int tb_dp_xchg_caps(struct tb_tunnel *tunnel) */ if (tb_route(out->sw) && tb_switch_is_titan_ridge(out->sw)) { out_dp_cap |= DP_COMMON_CAP_LTTPR_NS; - tb_port_dbg(out, "disabling LTTPR\n"); + tb_tunnel_dbg(tunnel, "disabling LTTPR\n"); } return tb_port_write(in, &out_dp_cap, TB_CFG_PORT, @@ -712,8 +773,8 @@ static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) lanes = min(in_lanes, out_lanes); tmp = tb_dp_bandwidth(rate, lanes); - tb_port_dbg(in, "non-reduced bandwidth %u Mb/s x%u = %u Mb/s\n", rate, - lanes, tmp); + tb_tunnel_dbg(tunnel, "non-reduced bandwidth %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tmp); ret = usb4_dp_port_set_nrd(in, rate, lanes); if (ret) @@ -728,15 +789,15 @@ static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) rate = min(in_rate, out_rate); tmp = tb_dp_bandwidth(rate, lanes); - tb_port_dbg(in, - "maximum bandwidth through allocation mode %u Mb/s x%u = %u Mb/s\n", - rate, lanes, tmp); + tb_tunnel_dbg(tunnel, + "maximum bandwidth through allocation mode %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tmp); for (granularity = 250; tmp / granularity > 255 && granularity <= 1000; granularity *= 2) ; - tb_port_dbg(in, "granularity %d Mb/s\n", granularity); + tb_tunnel_dbg(tunnel, "granularity %d Mb/s\n", granularity); /* * Returns -EINVAL if granularity above is outside of the @@ -751,12 +812,12 @@ static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) * max_up/down fields. For discovery we just read what the * estimation was set to. */ - if (in->sw->config.depth < out->sw->config.depth) + if (tb_port_path_direction_downstream(in, out)) estimated_bw = tunnel->max_down; else estimated_bw = tunnel->max_up; - tb_port_dbg(in, "estimated bandwidth %d Mb/s\n", estimated_bw); + tb_tunnel_dbg(tunnel, "estimated bandwidth %d Mb/s\n", estimated_bw); ret = usb4_dp_port_set_estimated_bandwidth(in, estimated_bw); if (ret) @@ -767,7 +828,7 @@ static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) if (ret) return ret; - tb_port_dbg(in, "bandwidth allocation mode enabled\n"); + tb_tunnel_dbg(tunnel, "bandwidth allocation mode enabled\n"); return 0; } @@ -788,7 +849,7 @@ static int tb_dp_init(struct tb_tunnel *tunnel) if (!usb4_dp_port_bandwidth_mode_supported(in)) return 0; - tb_port_dbg(in, "bandwidth allocation mode supported\n"); + tb_tunnel_dbg(tunnel, "bandwidth allocation mode supported\n"); ret = usb4_dp_port_set_cm_id(in, tb->index); if (ret) @@ -805,7 +866,7 @@ static void tb_dp_deinit(struct tb_tunnel *tunnel) return; if (usb4_dp_port_bandwidth_mode_enabled(in)) { usb4_dp_port_set_cm_bandwidth_mode_supported(in, false); - tb_port_dbg(in, "bandwidth allocation mode disabled\n"); + tb_tunnel_dbg(tunnel, "bandwidth allocation mode disabled\n"); } } @@ -921,10 +982,7 @@ static int tb_dp_bandwidth_mode_consumed_bandwidth(struct tb_tunnel *tunnel, if (allocated_bw == max_bw) allocated_bw = ret; - tb_port_dbg(in, "consumed bandwidth through allocation mode %d Mb/s\n", - allocated_bw); - - if (in->sw->config.depth < out->sw->config.depth) { + if (tb_port_path_direction_downstream(in, out)) { *consumed_up = 0; *consumed_down = allocated_bw; } else { @@ -959,7 +1017,7 @@ static int tb_dp_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up if (allocated_bw == max_bw) allocated_bw = ret; - if (in->sw->config.depth < out->sw->config.depth) { + if (tb_port_path_direction_downstream(in, out)) { *allocated_up = 0; *allocated_down = allocated_bw; } else { @@ -987,7 +1045,7 @@ static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, if (ret < 0) return ret; - if (in->sw->config.depth < out->sw->config.depth) { + if (tb_port_path_direction_downstream(in, out)) { tmp = min(*alloc_down, max_bw); ret = usb4_dp_port_allocate_bandwidth(in, tmp); if (ret) @@ -1006,9 +1064,6 @@ static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, /* Now we can use BW mode registers to figure out the bandwidth */ /* TODO: need to handle discovery too */ tunnel->bw_mode = true; - - tb_port_dbg(in, "allocated bandwidth through allocation mode %d Mb/s\n", - tmp); return 0; } @@ -1035,8 +1090,7 @@ static int tb_dp_read_dprx(struct tb_tunnel *tunnel, u32 *rate, u32 *lanes, *rate = tb_dp_cap_get_rate(val); *lanes = tb_dp_cap_get_lanes(val); - tb_port_dbg(in, "consumed bandwidth through DPRX %d Mb/s\n", - tb_dp_bandwidth(*rate, *lanes)); + tb_tunnel_dbg(tunnel, "DPRX read done\n"); return 0; } usleep_range(100, 150); @@ -1073,9 +1127,6 @@ static int tb_dp_read_cap(struct tb_tunnel *tunnel, unsigned int cap, u32 *rate, *rate = tb_dp_cap_get_rate(val); *lanes = tb_dp_cap_get_lanes(val); - - tb_port_dbg(in, "bandwidth from %#x capability %d Mb/s\n", cap, - tb_dp_bandwidth(*rate, *lanes)); return 0; } @@ -1092,7 +1143,7 @@ static int tb_dp_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, if (ret < 0) return ret; - if (in->sw->config.depth < tunnel->dst_port->sw->config.depth) { + if (tb_port_path_direction_downstream(in, tunnel->dst_port)) { *max_up = 0; *max_down = ret; } else { @@ -1150,7 +1201,7 @@ static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, return 0; } - if (in->sw->config.depth < tunnel->dst_port->sw->config.depth) { + if (tb_port_path_direction_downstream(in, tunnel->dst_port)) { *consumed_up = 0; *consumed_down = tb_dp_bandwidth(rate, lanes); } else { @@ -1172,7 +1223,7 @@ static void tb_dp_init_aux_credits(struct tb_path_hop *hop) hop->initial_credits = 1; } -static void tb_dp_init_aux_path(struct tb_path *path) +static void tb_dp_init_aux_path(struct tb_path *path, bool pm_support) { struct tb_path_hop *hop; @@ -1180,11 +1231,14 @@ static void tb_dp_init_aux_path(struct tb_path *path) path->egress_shared_buffer = TB_PATH_NONE; path->ingress_fc_enable = TB_PATH_ALL; path->ingress_shared_buffer = TB_PATH_NONE; - path->priority = 2; - path->weight = 1; + path->priority = TB_DP_AUX_PRIORITY; + path->weight = TB_DP_AUX_WEIGHT; - tb_path_for_each_hop(path, hop) + tb_path_for_each_hop(path, hop) { tb_dp_init_aux_credits(hop); + if (pm_support) + tb_init_pm_support(hop); + } } static int tb_dp_init_video_credits(struct tb_path_hop *hop) @@ -1216,7 +1270,7 @@ static int tb_dp_init_video_credits(struct tb_path_hop *hop) return 0; } -static int tb_dp_init_video_path(struct tb_path *path) +static int tb_dp_init_video_path(struct tb_path *path, bool pm_support) { struct tb_path_hop *hop; @@ -1224,8 +1278,8 @@ static int tb_dp_init_video_path(struct tb_path *path) path->egress_shared_buffer = TB_PATH_NONE; path->ingress_fc_enable = TB_PATH_NONE; path->ingress_shared_buffer = TB_PATH_NONE; - path->priority = 1; - path->weight = 1; + path->priority = TB_DP_VIDEO_PRIORITY; + path->weight = TB_DP_VIDEO_WEIGHT; tb_path_for_each_hop(path, hop) { int ret; @@ -1233,6 +1287,8 @@ static int tb_dp_init_video_path(struct tb_path *path) ret = tb_dp_init_video_credits(hop); if (ret) return ret; + if (pm_support) + tb_init_pm_support(hop); } return 0; @@ -1253,8 +1309,9 @@ static void tb_dp_dump(struct tb_tunnel *tunnel) rate = tb_dp_cap_get_rate(dp_cap); lanes = tb_dp_cap_get_lanes(dp_cap); - tb_port_dbg(in, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", - rate, lanes, tb_dp_bandwidth(rate, lanes)); + tb_tunnel_dbg(tunnel, + "DP IN maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tb_dp_bandwidth(rate, lanes)); out = tunnel->dst_port; @@ -1265,8 +1322,9 @@ static void tb_dp_dump(struct tb_tunnel *tunnel) rate = tb_dp_cap_get_rate(dp_cap); lanes = tb_dp_cap_get_lanes(dp_cap); - tb_port_dbg(out, "maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", - rate, lanes, tb_dp_bandwidth(rate, lanes)); + tb_tunnel_dbg(tunnel, + "DP OUT maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tb_dp_bandwidth(rate, lanes)); if (tb_port_read(in, &dp_cap, TB_CFG_PORT, in->cap_adap + DP_REMOTE_CAP, 1)) @@ -1275,8 +1333,8 @@ static void tb_dp_dump(struct tb_tunnel *tunnel) rate = tb_dp_cap_get_rate(dp_cap); lanes = tb_dp_cap_get_lanes(dp_cap); - tb_port_dbg(in, "reduced bandwidth %u Mb/s x%u = %u Mb/s\n", - rate, lanes, tb_dp_bandwidth(rate, lanes)); + tb_tunnel_dbg(tunnel, "reduced bandwidth %u Mb/s x%u = %u Mb/s\n", + rate, lanes, tb_dp_bandwidth(rate, lanes)); } /** @@ -1322,7 +1380,7 @@ struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, goto err_free; } tunnel->paths[TB_DP_VIDEO_PATH_OUT] = path; - if (tb_dp_init_video_path(tunnel->paths[TB_DP_VIDEO_PATH_OUT])) + if (tb_dp_init_video_path(tunnel->paths[TB_DP_VIDEO_PATH_OUT], false)) goto err_free; path = tb_path_discover(in, TB_DP_AUX_TX_HOPID, NULL, -1, NULL, "AUX TX", @@ -1330,14 +1388,14 @@ struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, if (!path) goto err_deactivate; tunnel->paths[TB_DP_AUX_PATH_OUT] = path; - tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_OUT]); + tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_OUT], false); path = tb_path_discover(tunnel->dst_port, -1, in, TB_DP_AUX_RX_HOPID, &port, "AUX RX", alloc_hopid); if (!path) goto err_deactivate; tunnel->paths[TB_DP_AUX_PATH_IN] = path; - tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_IN]); + tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_IN], false); /* Validate that the tunnel is complete */ if (!tb_port_is_dpout(tunnel->dst_port)) { @@ -1392,6 +1450,7 @@ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, struct tb_tunnel *tunnel; struct tb_path **paths; struct tb_path *path; + bool pm_support; if (WARN_ON(!in->cap_adap || !out->cap_adap)) return NULL; @@ -1413,26 +1472,27 @@ struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, tunnel->max_down = max_down; paths = tunnel->paths; + pm_support = usb4_switch_version(in->sw) >= 2; path = tb_path_alloc(tb, in, TB_DP_VIDEO_HOPID, out, TB_DP_VIDEO_HOPID, link_nr, "Video"); if (!path) goto err_free; - tb_dp_init_video_path(path); + tb_dp_init_video_path(path, pm_support); paths[TB_DP_VIDEO_PATH_OUT] = path; path = tb_path_alloc(tb, in, TB_DP_AUX_TX_HOPID, out, TB_DP_AUX_TX_HOPID, link_nr, "AUX TX"); if (!path) goto err_free; - tb_dp_init_aux_path(path); + tb_dp_init_aux_path(path, pm_support); paths[TB_DP_AUX_PATH_OUT] = path; path = tb_path_alloc(tb, out, TB_DP_AUX_RX_HOPID, in, TB_DP_AUX_RX_HOPID, link_nr, "AUX RX"); if (!path) goto err_free; - tb_dp_init_aux_path(path); + tb_dp_init_aux_path(path, pm_support); paths[TB_DP_AUX_PATH_IN] = path; return tunnel; @@ -1497,8 +1557,8 @@ static int tb_dma_init_rx_path(struct tb_path *path, unsigned int credits) path->ingress_fc_enable = TB_PATH_ALL; path->egress_shared_buffer = TB_PATH_NONE; path->ingress_shared_buffer = TB_PATH_NONE; - path->priority = 5; - path->weight = 1; + path->priority = TB_DMA_PRIORITY; + path->weight = TB_DMA_WEIGHT; path->clear_fc = true; /* @@ -1531,8 +1591,8 @@ static int tb_dma_init_tx_path(struct tb_path *path, unsigned int credits) path->ingress_fc_enable = TB_PATH_ALL; path->egress_shared_buffer = TB_PATH_NONE; path->ingress_shared_buffer = TB_PATH_NONE; - path->priority = 5; - path->weight = 1; + path->priority = TB_DMA_PRIORITY; + path->weight = TB_DMA_WEIGHT; path->clear_fc = true; tb_path_for_each_hop(path, hop) { @@ -1758,14 +1818,23 @@ static int tb_usb3_activate(struct tb_tunnel *tunnel, bool activate) static int tb_usb3_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, int *consumed_down) { - int pcie_enabled = tb_acpi_may_tunnel_pcie(); + struct tb_port *port = tb_upstream_port(tunnel->dst_port->sw); + int pcie_weight = tb_acpi_may_tunnel_pcie() ? TB_PCI_WEIGHT : 0; /* * PCIe tunneling, if enabled, affects the USB3 bandwidth so * take that it into account here. */ - *consumed_up = tunnel->allocated_up * (3 + pcie_enabled) / 3; - *consumed_down = tunnel->allocated_down * (3 + pcie_enabled) / 3; + *consumed_up = tunnel->allocated_up * + (TB_USB3_WEIGHT + pcie_weight) / TB_USB3_WEIGHT; + *consumed_down = tunnel->allocated_down * + (TB_USB3_WEIGHT + pcie_weight) / TB_USB3_WEIGHT; + + if (tb_port_get_link_generation(port) >= 4) { + *consumed_up = max(*consumed_up, USB4_V2_USB3_MIN_BANDWIDTH); + *consumed_down = max(*consumed_down, USB4_V2_USB3_MIN_BANDWIDTH); + } + return 0; } @@ -1790,17 +1859,10 @@ static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel, { int ret, max_rate, allocate_up, allocate_down; - ret = usb4_usb3_port_actual_link_rate(tunnel->src_port); + ret = tb_usb3_max_link_rate(tunnel->dst_port, tunnel->src_port); if (ret < 0) { - tb_tunnel_warn(tunnel, "failed to read actual link rate\n"); + tb_tunnel_warn(tunnel, "failed to read maximum link rate\n"); return; - } else if (!ret) { - /* Use maximum link rate if the link valid is not set */ - ret = tb_usb3_max_link_rate(tunnel->dst_port, tunnel->src_port); - if (ret < 0) { - tb_tunnel_warn(tunnel, "failed to read maximum link rate\n"); - return; - } } /* @@ -1871,8 +1933,8 @@ static void tb_usb3_init_path(struct tb_path *path) path->egress_shared_buffer = TB_PATH_NONE; path->ingress_fc_enable = TB_PATH_ALL; path->ingress_shared_buffer = TB_PATH_NONE; - path->priority = 3; - path->weight = 3; + path->priority = TB_USB3_PRIORITY; + path->weight = TB_USB3_WEIGHT; path->drop_packages = 0; tb_path_for_each_hop(path, hop) @@ -2387,3 +2449,8 @@ void tb_tunnel_reclaim_available_bandwidth(struct tb_tunnel *tunnel, tunnel->reclaim_available_bandwidth(tunnel, available_up, available_down); } + +const char *tb_tunnel_type_name(const struct tb_tunnel *tunnel) +{ + return tb_tunnel_names[tunnel->type]; +} diff --git a/drivers/thunderbolt/tunnel.h b/drivers/thunderbolt/tunnel.h index bf690f7beeee..b4cff5482112 100644 --- a/drivers/thunderbolt/tunnel.h +++ b/drivers/thunderbolt/tunnel.h @@ -80,6 +80,8 @@ struct tb_tunnel *tb_tunnel_discover_pci(struct tb *tb, struct tb_port *down, bool alloc_hopid); struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up, struct tb_port *down); +bool tb_tunnel_reserved_pci(struct tb_port *port, int *reserved_up, + int *reserved_down); struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, bool alloc_hopid); struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, @@ -137,5 +139,27 @@ static inline bool tb_tunnel_is_usb3(const struct tb_tunnel *tunnel) return tunnel->type == TB_TUNNEL_USB3; } -#endif +const char *tb_tunnel_type_name(const struct tb_tunnel *tunnel); + +#define __TB_TUNNEL_PRINT(level, tunnel, fmt, arg...) \ + do { \ + struct tb_tunnel *__tunnel = (tunnel); \ + level(__tunnel->tb, "%llx:%u <-> %llx:%u (%s): " fmt, \ + tb_route(__tunnel->src_port->sw), \ + __tunnel->src_port->port, \ + tb_route(__tunnel->dst_port->sw), \ + __tunnel->dst_port->port, \ + tb_tunnel_type_name(__tunnel), \ + ## arg); \ + } while (0) +#define tb_tunnel_WARN(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_WARN, tunnel, fmt, ##arg) +#define tb_tunnel_warn(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_warn, tunnel, fmt, ##arg) +#define tb_tunnel_info(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_info, tunnel, fmt, ##arg) +#define tb_tunnel_dbg(tunnel, fmt, arg...) \ + __TB_TUNNEL_PRINT(tb_dbg, tunnel, fmt, ##arg) + +#endif diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 05ddb224c464..4277733d0021 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -1455,6 +1455,112 @@ bool usb4_port_clx_supported(struct tb_port *port) } /** + * usb4_port_asym_supported() - If the port supports asymmetric link + * @port: USB4 port + * + * Checks if the port and the cable supports asymmetric link and returns + * %true in that case. + */ +bool usb4_port_asym_supported(struct tb_port *port) +{ + u32 val; + + if (!port->cap_usb4) + return false; + + if (tb_port_read(port, &val, TB_CFG_PORT, port->cap_usb4 + PORT_CS_18, 1)) + return false; + + return !!(val & PORT_CS_18_CSA); +} + +/** + * usb4_port_asym_set_link_width() - Set link width to asymmetric or symmetric + * @port: USB4 port + * @width: Asymmetric width to configure + * + * Sets USB4 port link width to @width. Can be called for widths where + * usb4_port_asym_width_supported() returned @true. + */ +int usb4_port_asym_set_link_width(struct tb_port *port, enum tb_link_width width) +{ + u32 val; + int ret; + + if (!port->cap_phy) + return -EINVAL; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); + if (ret) + return ret; + + val &= ~LANE_ADP_CS_1_TARGET_WIDTH_ASYM_MASK; + switch (width) { + case TB_LINK_WIDTH_DUAL: + val |= FIELD_PREP(LANE_ADP_CS_1_TARGET_WIDTH_ASYM_MASK, + LANE_ADP_CS_1_TARGET_WIDTH_ASYM_DUAL); + break; + case TB_LINK_WIDTH_ASYM_TX: + val |= FIELD_PREP(LANE_ADP_CS_1_TARGET_WIDTH_ASYM_MASK, + LANE_ADP_CS_1_TARGET_WIDTH_ASYM_TX); + break; + case TB_LINK_WIDTH_ASYM_RX: + val |= FIELD_PREP(LANE_ADP_CS_1_TARGET_WIDTH_ASYM_MASK, + LANE_ADP_CS_1_TARGET_WIDTH_ASYM_RX); + break; + default: + return -EINVAL; + } + + return tb_port_write(port, &val, TB_CFG_PORT, + port->cap_phy + LANE_ADP_CS_1, 1); +} + +/** + * usb4_port_asym_start() - Start symmetry change and wait for completion + * @port: USB4 port + * + * Start symmetry change of the link to asymmetric or symmetric + * (according to what was previously set in tb_port_set_link_width(). + * Wait for completion of the change. + * + * Returns %0 in case of success, %-ETIMEDOUT if case of timeout or + * a negative errno in case of a failure. + */ +int usb4_port_asym_start(struct tb_port *port) +{ + int ret; + u32 val; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + val &= ~PORT_CS_19_START_ASYM; + val |= FIELD_PREP(PORT_CS_19_START_ASYM, 1); + + ret = tb_port_write(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + /* + * Wait for PORT_CS_19_START_ASYM to be 0. This means the USB4 + * port started the symmetry transition. + */ + ret = usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_19, + PORT_CS_19_START_ASYM, 0, 1000); + if (ret) + return ret; + + /* Then wait for the transtion to be completed */ + return usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_18, + PORT_CS_18_TIP, 0, 5000); +} + +/** * usb4_port_margining_caps() - Read USB4 port marginig capabilities * @port: USB4 port * @caps: Array with at least two elements to hold the results @@ -1946,35 +2052,6 @@ int usb4_usb3_port_max_link_rate(struct tb_port *port) return usb4_usb3_port_max_bandwidth(port, ret); } -/** - * usb4_usb3_port_actual_link_rate() - Established USB3 link rate - * @port: USB3 adapter port - * - * Return actual established link rate of a USB3 adapter in Mb/s. If the - * link is not up returns %0 and negative errno in case of failure. - */ -int usb4_usb3_port_actual_link_rate(struct tb_port *port) -{ - int ret, lr; - u32 val; - - if (!tb_port_is_usb3_down(port) && !tb_port_is_usb3_up(port)) - return -EINVAL; - - ret = tb_port_read(port, &val, TB_CFG_PORT, - port->cap_adap + ADP_USB3_CS_4, 1); - if (ret) - return ret; - - if (!(val & ADP_USB3_CS_4_ULV)) - return 0; - - lr = val & ADP_USB3_CS_4_ALR_MASK; - ret = lr == ADP_USB3_CS_4_ALR_20G ? 20000 : 10000; - - return usb4_usb3_port_max_bandwidth(port, ret); -} - static int usb4_usb3_port_cm_request(struct tb_port *port, bool request) { int ret; diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 7f33bcc315f2..abf8c6cdea9e 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -91,6 +91,16 @@ config USB_PCI If you have such a device you may say N here and PCI related code will not be built in the USB driver. +config USB_PCI_AMD + bool "AMD PCI USB host support" + depends on USB_PCI && HAS_IOPORT + default X86 || MACH_LOONGSON64 || PPC_PASEMI + help + Enable workarounds for USB implementation quirks in SB600/SB700/SB800 + and later south bridge implementations. These are common on x86 PCs + with AMD CPUs but rarely used elsewhere, with the exception of a few + powerpc and mips desktop machines. + if USB source "drivers/usb/core/Kconfig" diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h index 6332a6b5dce6..6ba5adced61c 100644 --- a/drivers/usb/c67x00/c67x00-hcd.h +++ b/drivers/usb/c67x00/c67x00-hcd.h @@ -109,7 +109,6 @@ int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep); -void c67x00_hcd_msg_received(struct c67x00_sie *sie, u16 msg); void c67x00_sched_kick(struct c67x00_hcd *c67x00); int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00); void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00); diff --git a/drivers/usb/cdns3/cdnsp-debug.h b/drivers/usb/cdns3/cdnsp-debug.h index f0ca865cce2a..ad617b7455b9 100644 --- a/drivers/usb/cdns3/cdnsp-debug.h +++ b/drivers/usb/cdns3/cdnsp-debug.h @@ -131,8 +131,6 @@ static inline const char *cdnsp_trb_type_string(u8 type) return "Endpoint Not ready"; case TRB_HALT_ENDPOINT: return "Halt Endpoint"; - case TRB_FLUSH_ENDPOINT: - return "FLush Endpoint"; default: return "UNKNOWN"; } @@ -328,7 +326,6 @@ static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0, break; case TRB_RESET_EP: case TRB_HALT_ENDPOINT: - case TRB_FLUSH_ENDPOINT: ret = snprintf(str, size, "%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c", cdnsp_trb_type_string(type), diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c index 4b67749edb99..4a3f0f958256 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.c +++ b/drivers/usb/cdns3/cdnsp-gadget.c @@ -1024,10 +1024,8 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep) pep->ep_state |= EP_DIS_IN_RROGRESS; /* Endpoint was unconfigured by Reset Device command. */ - if (!(pep->ep_state & EP_UNCONFIGURED)) { + if (!(pep->ep_state & EP_UNCONFIGURED)) cdnsp_cmd_stop_ep(pdev, pep); - cdnsp_cmd_flush_ep(pdev, pep); - } /* Remove all queued USB requests. */ while (!list_empty(&pep->pending_list)) { @@ -1424,8 +1422,6 @@ static void cdnsp_stop(struct cdnsp_device *pdev) { u32 temp; - cdnsp_cmd_flush_ep(pdev, &pdev->eps[0]); - /* Remove internally queued request for ep0. */ if (!list_empty(&pdev->eps[0].pending_list)) { struct cdnsp_request *req; diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h index e1b5801fdddf..dbee6f085277 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.h +++ b/drivers/usb/cdns3/cdnsp-gadget.h @@ -1128,8 +1128,6 @@ union cdnsp_trb { #define TRB_HALT_ENDPOINT 54 /* Doorbell Overflow Event. */ #define TRB_DRB_OVERFLOW 57 -/* Flush Endpoint Command. */ -#define TRB_FLUSH_ENDPOINT 58 #define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)) #define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ @@ -1539,8 +1537,6 @@ void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev, void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index); void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index); -void cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev, - unsigned int ep_index); void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num); void cdnsp_queue_reset_device(struct cdnsp_device *pdev); void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev, @@ -1574,7 +1570,6 @@ void cdnsp_irq_reset(struct cdnsp_device *pdev); int cdnsp_halt_endpoint(struct cdnsp_device *pdev, struct cdnsp_ep *pep, int value); int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep); -int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep); void cdnsp_setup_analyze(struct cdnsp_device *pdev); int cdnsp_status_stage(struct cdnsp_device *pdev); int cdnsp_reset_device(struct cdnsp_device *pdev); diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index 07f6068342d4..af981778382d 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -2123,19 +2123,6 @@ ep_stopped: return ret; } -int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep) -{ - int ret; - - cdnsp_queue_flush_endpoint(pdev, pep->idx); - cdnsp_ring_cmd_db(pdev); - ret = cdnsp_wait_for_cmd_compl(pdev); - - trace_cdnsp_handle_cmd_flush_ep(pep->out_ctx); - - return ret; -} - /* * The transfer burst count field of the isochronous TRB defines the number of * bursts that are required to move all packets in this TD. Only SuperSpeed @@ -2465,17 +2452,6 @@ void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev, unsigned int ep_index) EP_ID_FOR_TRB(ep_index)); } -/* - * Queue a flush endpoint request on the command ring. - */ -void cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev, - unsigned int ep_index) -{ - cdnsp_queue_command(pdev, 0, 0, 0, TRB_TYPE(TRB_FLUSH_ENDPOINT) | - SLOT_ID_FOR_TRB(pdev->slot_id) | - EP_ID_FOR_TRB(ep_index)); -} - void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num) { u32 lo, mid; diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index c815824a0b2d..bab45bc62361 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -43,6 +43,10 @@ config USB_CHIPIDEA_MSM tristate "Enable MSM hsusb glue driver" if EXPERT default USB_CHIPIDEA +config USB_CHIPIDEA_NPCM + tristate "Enable NPCM hsusb glue driver" if EXPERT + default USB_CHIPIDEA + config USB_CHIPIDEA_IMX tristate "Enable i.MX USB glue driver" if EXPERT depends on OF diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 71afeab97e83..718cb24603dd 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -13,6 +13,7 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o obj-$(CONFIG_USB_CHIPIDEA_GENERIC) += ci_hdrc_usb2.o obj-$(CONFIG_USB_CHIPIDEA_MSM) += ci_hdrc_msm.o +obj-$(CONFIG_USB_CHIPIDEA_NPCM) += ci_hdrc_npcm.o obj-$(CONFIG_USB_CHIPIDEA_PCI) += ci_hdrc_pci.o obj-$(CONFIG_USB_CHIPIDEA_IMX) += usbmisc_imx.o ci_hdrc_imx.o obj-$(CONFIG_USB_CHIPIDEA_TEGRA) += ci_hdrc_tegra.o diff --git a/drivers/usb/chipidea/ci_hdrc_npcm.c b/drivers/usb/chipidea/ci_hdrc_npcm.c new file mode 100644 index 000000000000..e4a191e02ceb --- /dev/null +++ b/drivers/usb/chipidea/ci_hdrc_npcm.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2023 Nuvoton Technology corporation. + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/usb/chipidea.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/reset-controller.h> +#include <linux/of.h> + +#include "ci.h" + +struct npcm_udc_data { + struct platform_device *ci; + struct clk *core_clk; + struct ci_hdrc_platform_data pdata; +}; + +static int npcm_udc_notify_event(struct ci_hdrc *ci, unsigned event) +{ + struct device *dev = ci->dev->parent; + + switch (event) { + case CI_HDRC_CONTROLLER_RESET_EVENT: + /* clear all mode bits */ + hw_write(ci, OP_USBMODE, 0xffffffff, 0x0); + break; + default: + dev_dbg(dev, "unknown ci_hdrc event (%d)\n",event); + break; + } + + return 0; +} + +static int npcm_udc_probe(struct platform_device *pdev) +{ + int ret; + struct npcm_udc_data *ci; + struct platform_device *plat_ci; + struct device *dev = &pdev->dev; + + ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL); + if (!ci) + return -ENOMEM; + platform_set_drvdata(pdev, ci); + + ci->core_clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(ci->core_clk)) + return PTR_ERR(ci->core_clk); + + ret = clk_prepare_enable(ci->core_clk); + if (ret) + return dev_err_probe(dev, ret, "failed to enable the clock: %d\n", ret); + + ci->pdata.name = dev_name(dev); + ci->pdata.capoffset = DEF_CAPOFFSET; + ci->pdata.flags = CI_HDRC_REQUIRES_ALIGNED_DMA | + CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS; + ci->pdata.phy_mode = USBPHY_INTERFACE_MODE_UTMI; + ci->pdata.notify_event = npcm_udc_notify_event; + + plat_ci = ci_hdrc_add_device(dev, pdev->resource, pdev->num_resources, + &ci->pdata); + if (IS_ERR(plat_ci)) { + ret = PTR_ERR(plat_ci); + dev_err(dev, "failed to register HDRC NPCM device: %d\n", ret); + goto clk_err; + } + + pm_runtime_no_callbacks(dev); + pm_runtime_enable(dev); + + return 0; + +clk_err: + clk_disable_unprepare(ci->core_clk); + return ret; +} + +static int npcm_udc_remove(struct platform_device *pdev) +{ + struct npcm_udc_data *ci = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + ci_hdrc_remove_device(ci->ci); + clk_disable_unprepare(ci->core_clk); + + return 0; +} + +static const struct of_device_id npcm_udc_dt_match[] = { + { .compatible = "nuvoton,npcm750-udc", }, + { .compatible = "nuvoton,npcm845-udc", }, + { } +}; +MODULE_DEVICE_TABLE(of, npcm_udc_dt_match); + +static struct platform_driver npcm_udc_driver = { + .probe = npcm_udc_probe, + .remove = npcm_udc_remove, + .driver = { + .name = "npcm_udc", + .of_match_table = npcm_udc_dt_match, + }, +}; + +module_platform_driver(npcm_udc_driver); + +MODULE_DESCRIPTION("NPCM USB device controller driver"); +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c index 8e78bf643e25..2cc305803217 100644 --- a/drivers/usb/chipidea/ci_hdrc_tegra.c +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c @@ -293,14 +293,12 @@ static int tegra_usb_probe(struct platform_device *pdev) usb->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0); if (IS_ERR(usb->phy)) return dev_err_probe(&pdev->dev, PTR_ERR(usb->phy), - "failed to get PHY\n"); + "failed to get PHY"); usb->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(usb->clk)) { - err = PTR_ERR(usb->clk); - dev_err(&pdev->dev, "failed to get clock: %d\n", err); - return err; - } + if (IS_ERR(usb->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(usb->clk), + "failed to get clock"); err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev); if (err) @@ -316,7 +314,7 @@ static int tegra_usb_probe(struct platform_device *pdev) err = tegra_usb_reset_controller(&pdev->dev); if (err) { - dev_err(&pdev->dev, "failed to reset controller: %d\n", err); + dev_err_probe(&pdev->dev, err, "failed to reset controller"); goto fail_power_off; } @@ -347,8 +345,8 @@ static int tegra_usb_probe(struct platform_device *pdev) usb->dev = ci_hdrc_add_device(&pdev->dev, pdev->resource, pdev->num_resources, &usb->data); if (IS_ERR(usb->dev)) { - err = PTR_ERR(usb->dev); - dev_err(&pdev->dev, "failed to add HDRC device: %d\n", err); + err = dev_err_probe(&pdev->dev, PTR_ERR(usb->dev), + "failed to add HDRC device"); goto phy_shutdown; } diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c index 1321ee67f3b8..97379f653b06 100644 --- a/drivers/usb/chipidea/ci_hdrc_usb2.c +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c @@ -9,9 +9,9 @@ #include <linux/dma-mapping.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/usb/chipidea.h> #include <linux/usb/hcd.h> #include <linux/usb/ulpi.h> @@ -51,8 +51,8 @@ static int ci_hdrc_usb2_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ci_hdrc_usb2_priv *priv; struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev); + const struct ci_hdrc_platform_data *data; int ret; - const struct of_device_id *match; if (!ci_pdata) { ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL); @@ -61,11 +61,10 @@ static int ci_hdrc_usb2_probe(struct platform_device *pdev) *ci_pdata = ci_default_pdata; /* struct copy */ } - match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev); - if (match && match->data) { + data = device_get_match_data(&pdev->dev); + if (data) /* struct copy */ - *ci_pdata = *(struct ci_hdrc_platform_data *)match->data; - } + *ci_pdata = *data; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -120,7 +119,7 @@ static struct platform_driver ci_hdrc_usb2_driver = { .remove_new = ci_hdrc_usb2_remove, .driver = { .name = "chipidea-usb2", - .of_match_table = of_match_ptr(ci_hdrc_usb2_of_match), + .of_match_table = ci_hdrc_usb2_of_match, }, }; module_platform_driver(ci_hdrc_usb2_driver); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 08af26b762a2..0cce19208370 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -30,8 +30,7 @@ struct ehci_ci_priv { }; struct ci_hdrc_dma_aligned_buffer { - void *kmalloc_ptr; - void *old_xfer_buffer; + void *original_buffer; u8 data[]; }; @@ -380,59 +379,52 @@ static int ci_ehci_bus_suspend(struct usb_hcd *hcd) return 0; } -static void ci_hdrc_free_dma_aligned_buffer(struct urb *urb) +static void ci_hdrc_free_dma_aligned_buffer(struct urb *urb, bool copy_back) { struct ci_hdrc_dma_aligned_buffer *temp; - size_t length; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; temp = container_of(urb->transfer_buffer, struct ci_hdrc_dma_aligned_buffer, data); + urb->transfer_buffer = temp->original_buffer; + + if (copy_back && usb_urb_dir_in(urb)) { + size_t length; - if (usb_urb_dir_in(urb)) { if (usb_pipeisoc(urb->pipe)) length = urb->transfer_buffer_length; else length = urb->actual_length; - memcpy(temp->old_xfer_buffer, temp->data, length); + memcpy(temp->original_buffer, temp->data, length); } - urb->transfer_buffer = temp->old_xfer_buffer; - kfree(temp->kmalloc_ptr); - urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; + kfree(temp); } static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) { - struct ci_hdrc_dma_aligned_buffer *temp, *kmalloc_ptr; - const unsigned int ci_hdrc_usb_dma_align = 32; - size_t kmalloc_size; + struct ci_hdrc_dma_aligned_buffer *temp; - if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 || - !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1))) + if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0) + return 0; + if (IS_ALIGNED((uintptr_t)urb->transfer_buffer, 4) + && IS_ALIGNED(urb->transfer_buffer_length, 4)) return 0; - /* Allocate a buffer with enough padding for alignment */ - kmalloc_size = urb->transfer_buffer_length + - sizeof(struct ci_hdrc_dma_aligned_buffer) + - ci_hdrc_usb_dma_align - 1; - - kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); - if (!kmalloc_ptr) + temp = kmalloc(sizeof(*temp) + ALIGN(urb->transfer_buffer_length, 4), mem_flags); + if (!temp) return -ENOMEM; - /* Position our struct dma_aligned_buffer such that data is aligned */ - temp = PTR_ALIGN(kmalloc_ptr + 1, ci_hdrc_usb_dma_align) - 1; - temp->kmalloc_ptr = kmalloc_ptr; - temp->old_xfer_buffer = urb->transfer_buffer; if (usb_urb_dir_out(urb)) memcpy(temp->data, urb->transfer_buffer, urb->transfer_buffer_length); - urb->transfer_buffer = temp->data; + temp->original_buffer = urb->transfer_buffer; + urb->transfer_buffer = temp->data; urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; return 0; @@ -449,7 +441,7 @@ static int ci_hdrc_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); if (ret) - ci_hdrc_free_dma_aligned_buffer(urb); + ci_hdrc_free_dma_aligned_buffer(urb, false); return ret; } @@ -457,7 +449,7 @@ static int ci_hdrc_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, static void ci_hdrc_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) { usb_hcd_unmap_urb_for_dma(hcd, urb); - ci_hdrc_free_dma_aligned_buffer(urb); + ci_hdrc_free_dma_aligned_buffer(urb, true); } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index f5490f2a5b6b..647e98f4e351 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -130,8 +130,11 @@ enum ci_role ci_otg_role(struct ci_hdrc *ci) void ci_handle_vbus_change(struct ci_hdrc *ci) { - if (!ci->is_otg) + if (!ci->is_otg) { + if (ci->platdata->flags & CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS) + usb_gadget_vbus_connect(&ci->gadget); return; + } if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active) usb_gadget_vbus_connect(&ci->gadget); diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 990280688b25..ee3156f49533 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -206,8 +206,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver) goto free_irq_vectors; } - hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) && - driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0; + hcd->amd_resume_bug = usb_hcd_amd_resume_bug(dev, driver); if (driver->flags & HCD_MEMORY) { /* EHCI, OHCI */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0ff47eeffb49..b4584a0cd484 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2274,6 +2274,8 @@ void usb_disconnect(struct usb_device **pdev) */ if (!test_and_set_bit(port1, hub->child_usage_bits)) pm_runtime_get_sync(&port_dev->dev); + + typec_deattach(port_dev->connector, &udev->dev); } usb_remove_ep_devs(&udev->ep0); @@ -2620,6 +2622,8 @@ int usb_new_device(struct usb_device *udev) if (!test_and_set_bit(port1, hub->child_usage_bits)) pm_runtime_get_sync(&port_dev->dev); + + typec_attach(port_dev->connector, &udev->dev); } (void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index d44dd7f6623e..43ce21c96a51 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -14,6 +14,7 @@ #include <linux/usb.h> #include <linux/usb/ch11.h> #include <linux/usb/hcd.h> +#include <linux/usb/typec.h> #include "usb.h" struct usb_hub { @@ -82,6 +83,7 @@ struct usb_hub { * @dev: generic device interface * @port_owner: port's owner * @peer: related usb2 and usb3 ports (share the same connector) + * @connector: USB Type-C connector * @req: default pm qos request for hubs without port power control * @connect_type: port's connect type * @state: device state of the usb device attached to the port @@ -100,6 +102,7 @@ struct usb_port { struct device dev; struct usb_dev_state *port_owner; struct usb_port *peer; + struct typec_connector *connector; struct dev_pm_qos_request *req; enum usb_port_connect_type connect_type; enum usb_device_state state; diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 77be0dc28da9..c628c1abc907 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -653,6 +653,7 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) static int connector_bind(struct device *dev, struct device *connector, void *data) { + struct usb_port *port_dev = to_usb_port(dev); int ret; ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector"); @@ -660,16 +661,30 @@ static int connector_bind(struct device *dev, struct device *connector, void *da return ret; ret = sysfs_create_link(&connector->kobj, &dev->kobj, dev_name(dev)); - if (ret) + if (ret) { sysfs_remove_link(&dev->kobj, "connector"); + return ret; + } + + port_dev->connector = data; + + /* + * If there is already USB device connected to the port, letting the + * Type-C connector know about it immediately. + */ + if (port_dev->child) + typec_attach(port_dev->connector, &port_dev->child->dev); - return ret; + return 0; } static void connector_unbind(struct device *dev, struct device *connector, void *data) { + struct usb_port *port_dev = to_usb_port(dev); + sysfs_remove_link(&connector->kobj, dev_name(dev)); sysfs_remove_link(&dev->kobj, "connector"); + port_dev->connector = NULL; } static const struct component_ops connector_ops = { @@ -698,6 +713,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) set_bit(port1, hub->power_bits); port_dev->dev.parent = hub->intfdev; if (hub_is_superspeed(hdev)) { + port_dev->is_superspeed = 1; port_dev->usb3_lpm_u1_permit = 1; port_dev->usb3_lpm_u2_permit = 1; port_dev->dev.groups = port_dev_usb3_group; @@ -705,8 +721,6 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) port_dev->dev.groups = port_dev_group; port_dev->dev.type = &usb_port_device_type; port_dev->dev.driver = &usb_port_driver; - if (hub_is_superspeed(hub->hdev)) - port_dev->is_superspeed = 1; dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev), port1); mutex_init(&port_dev->status_lock); diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 657f1f659ffa..35c7a4df8e71 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4769,8 +4769,8 @@ fail3: if (qh_allocated && qh->channel && qh->channel->qh == qh) qh->channel->qh = NULL; fail2: - spin_unlock_irqrestore(&hsotg->lock, flags); urb->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); kfree(qtd); fail1: if (qh_allocated) { diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 93f52e371cdd..fb03162ae9b7 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -5,7 +5,7 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/usb/of.h> #include <linux/pci_ids.h> #include <linux/pci.h> @@ -968,26 +968,17 @@ typedef void (*set_params_cb)(struct dwc2_hsotg *data); int dwc2_init_params(struct dwc2_hsotg *hsotg) { - const struct of_device_id *match; set_params_cb set_params; dwc2_set_default_params(hsotg); dwc2_get_device_properties(hsotg); - match = of_match_device(dwc2_of_match_table, hsotg->dev); - if (match && match->data) { - set_params = match->data; + set_params = device_get_match_data(hsotg->dev); + if (set_params) { set_params(hsotg); - } else if (!match) { - const struct acpi_device_id *amatch; - const struct pci_device_id *pmatch = NULL; - - amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev); - if (amatch && amatch->driver_data) { - set_params = (set_params_cb)amatch->driver_data; - set_params(hsotg); - } else if (!amatch) - pmatch = pci_match_id(dwc2_pci_ids, to_pci_dev(hsotg->dev->parent)); + } else { + const struct pci_device_id *pmatch = + pci_match_id(dwc2_pci_ids, to_pci_dev(hsotg->dev->parent)); if (pmatch && pmatch->driver_data) { set_params = (set_params_cb)pmatch->driver_data; diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 98efcbb76c88..5fc27b20df63 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -178,4 +178,15 @@ config USB_DWC3_OCTEON Only the host mode is currently supported. Say 'Y' or 'M' here if you have one such device. +config USB_DWC3_RTK + tristate "Realtek DWC3 Platform Driver" + depends on OF && ARCH_REALTEK + default USB_DWC3 + select USB_ROLE_SWITCH + help + RTK DHC RTD SoCs with DesignWare Core USB3 IP inside, + and IP Core configured for USB 2.0 and USB 3.0 in host + or dual-role mode. + Say 'Y' or 'M' if you have such device. + endif diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index fe1493d4bbe5..124eda2522d9 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -55,3 +55,4 @@ obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o obj-$(CONFIG_USB_DWC3_IMX8MP) += dwc3-imx8mp.o obj-$(CONFIG_USB_DWC3_XILINX) += dwc3-xilinx.o obj-$(CONFIG_USB_DWC3_OCTEON) += dwc3-octeon.o +obj-$(CONFIG_USB_DWC3_RTK) += dwc3-rtk.o diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 343d2570189f..0328c86ef806 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -854,8 +854,20 @@ static int dwc3_clk_enable(struct dwc3 *dwc) if (ret) goto disable_ref_clk; + ret = clk_prepare_enable(dwc->utmi_clk); + if (ret) + goto disable_susp_clk; + + ret = clk_prepare_enable(dwc->pipe_clk); + if (ret) + goto disable_utmi_clk; + return 0; +disable_utmi_clk: + clk_disable_unprepare(dwc->utmi_clk); +disable_susp_clk: + clk_disable_unprepare(dwc->susp_clk); disable_ref_clk: clk_disable_unprepare(dwc->ref_clk); disable_bus_clk: @@ -865,6 +877,8 @@ disable_bus_clk: static void dwc3_clk_disable(struct dwc3 *dwc) { + clk_disable_unprepare(dwc->pipe_clk); + clk_disable_unprepare(dwc->utmi_clk); clk_disable_unprepare(dwc->susp_clk); clk_disable_unprepare(dwc->ref_clk); clk_disable_unprepare(dwc->bus_clk); @@ -1094,6 +1108,111 @@ static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc) } } +static void dwc3_config_threshold(struct dwc3 *dwc) +{ + u32 reg; + u8 rx_thr_num; + u8 rx_maxburst; + u8 tx_thr_num; + u8 tx_maxburst; + + /* + * Must config both number of packets and max burst settings to enable + * RX and/or TX threshold. + */ + if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) { + rx_thr_num = dwc->rx_thr_num_pkt_prd; + rx_maxburst = dwc->rx_max_burst_prd; + tx_thr_num = dwc->tx_thr_num_pkt_prd; + tx_maxburst = dwc->tx_max_burst_prd; + + if (rx_thr_num && rx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); + reg |= DWC31_RXTHRNUMPKTSEL_PRD; + + reg &= ~DWC31_RXTHRNUMPKT_PRD(~0); + reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num); + + reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0); + reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + } + + if (tx_thr_num && tx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); + reg |= DWC31_TXTHRNUMPKTSEL_PRD; + + reg &= ~DWC31_TXTHRNUMPKT_PRD(~0); + reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num); + + reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0); + reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); + } + } + + rx_thr_num = dwc->rx_thr_num_pkt; + rx_maxburst = dwc->rx_max_burst; + tx_thr_num = dwc->tx_thr_num_pkt; + tx_maxburst = dwc->tx_max_burst; + + if (DWC3_IP_IS(DWC3)) { + if (rx_thr_num && rx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); + reg |= DWC3_GRXTHRCFG_PKTCNTSEL; + + reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0); + reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num); + + reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0); + reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + } + + if (tx_thr_num && tx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); + reg |= DWC3_GTXTHRCFG_PKTCNTSEL; + + reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0); + reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num); + + reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0); + reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); + } + } else { + if (rx_thr_num && rx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); + reg |= DWC31_GRXTHRCFG_PKTCNTSEL; + + reg &= ~DWC31_GRXTHRCFG_RXPKTCNT(~0); + reg |= DWC31_GRXTHRCFG_RXPKTCNT(rx_thr_num); + + reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE(~0); + reg |= DWC31_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); + } + + if (tx_thr_num && tx_maxburst) { + reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); + reg |= DWC31_GTXTHRCFG_PKTCNTSEL; + + reg &= ~DWC31_GTXTHRCFG_TXPKTCNT(~0); + reg |= DWC31_GTXTHRCFG_TXPKTCNT(tx_thr_num); + + reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE(~0); + reg |= DWC31_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst); + + dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); + } + } +} + /** * dwc3_core_init - Low-level initialization of DWC3 Core * @dwc: Pointer to our controller context structure @@ -1246,42 +1365,7 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } - /* - * Must config both number of packets and max burst settings to enable - * RX and/or TX threshold. - */ - if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) { - u8 rx_thr_num = dwc->rx_thr_num_pkt_prd; - u8 rx_maxburst = dwc->rx_max_burst_prd; - u8 tx_thr_num = dwc->tx_thr_num_pkt_prd; - u8 tx_maxburst = dwc->tx_max_burst_prd; - - if (rx_thr_num && rx_maxburst) { - reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); - reg |= DWC31_RXTHRNUMPKTSEL_PRD; - - reg &= ~DWC31_RXTHRNUMPKT_PRD(~0); - reg |= DWC31_RXTHRNUMPKT_PRD(rx_thr_num); - - reg &= ~DWC31_MAXRXBURSTSIZE_PRD(~0); - reg |= DWC31_MAXRXBURSTSIZE_PRD(rx_maxburst); - - dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); - } - - if (tx_thr_num && tx_maxburst) { - reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG); - reg |= DWC31_TXTHRNUMPKTSEL_PRD; - - reg &= ~DWC31_TXTHRNUMPKT_PRD(~0); - reg |= DWC31_TXTHRNUMPKT_PRD(tx_thr_num); - - reg &= ~DWC31_MAXTXBURSTSIZE_PRD(~0); - reg |= DWC31_MAXTXBURSTSIZE_PRD(tx_maxburst); - - dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg); - } - } + dwc3_config_threshold(dwc); return 0; @@ -1417,6 +1501,10 @@ static void dwc3_get_properties(struct dwc3 *dwc) u8 lpm_nyet_threshold; u8 tx_de_emphasis; u8 hird_threshold; + u8 rx_thr_num_pkt = 0; + u8 rx_max_burst = 0; + u8 tx_thr_num_pkt = 0; + u8 tx_max_burst = 0; u8 rx_thr_num_pkt_prd = 0; u8 rx_max_burst_prd = 0; u8 tx_thr_num_pkt_prd = 0; @@ -1479,6 +1567,14 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,usb2-lpm-disable"); dwc->usb2_gadget_lpm_disable = device_property_read_bool(dev, "snps,usb2-gadget-lpm-disable"); + device_property_read_u8(dev, "snps,rx-thr-num-pkt", + &rx_thr_num_pkt); + device_property_read_u8(dev, "snps,rx-max-burst", + &rx_max_burst); + device_property_read_u8(dev, "snps,tx-thr-num-pkt", + &tx_thr_num_pkt); + device_property_read_u8(dev, "snps,tx-max-burst", + &tx_max_burst); device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd", &rx_thr_num_pkt_prd); device_property_read_u8(dev, "snps,rx-max-burst-prd", @@ -1560,6 +1656,12 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->hird_threshold = hird_threshold; + dwc->rx_thr_num_pkt = rx_thr_num_pkt; + dwc->rx_max_burst = rx_max_burst; + + dwc->tx_thr_num_pkt = tx_thr_num_pkt; + dwc->tx_max_burst = tx_max_burst; + dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd; dwc->rx_max_burst_prd = rx_max_burst_prd; @@ -1785,6 +1887,20 @@ static int dwc3_get_clocks(struct dwc3 *dwc) } } + /* specific to Rockchip RK3588 */ + dwc->utmi_clk = devm_clk_get_optional(dev, "utmi"); + if (IS_ERR(dwc->utmi_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->utmi_clk), + "could not get utmi clock\n"); + } + + /* specific to Rockchip RK3588 */ + dwc->pipe_clk = devm_clk_get_optional(dev, "pipe"); + if (IS_ERR(dwc->pipe_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->pipe_clk), + "could not get pipe clock\n"); + } + return 0; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index a69ac67d89fe..efe6caf4d0e8 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -211,6 +211,11 @@ #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24) #define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29) +/* Global TX Threshold Configuration Register */ +#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16) +#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24) +#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29) + /* Global RX Threshold Configuration Register for DWC_usb31 only */ #define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 16) #define DWC31_GRXTHRCFG_RXPKTCNT(n) (((n) & 0x1f) << 21) @@ -991,6 +996,8 @@ struct dwc3_scratchpad_array { * @bus_clk: clock for accessing the registers * @ref_clk: reference clock * @susp_clk: clock used when the SS phy is in low power (S3) state + * @utmi_clk: clock used for USB2 PHY communication + * @pipe_clk: clock used for USB3 PHY communication * @reset: reset control * @regs: base address for our registers * @regs_size: address space size @@ -1045,6 +1052,10 @@ struct dwc3_scratchpad_array { * @test_mode_nr: test feature selector * @lpm_nyet_threshold: LPM NYET response threshold * @hird_threshold: HIRD threshold + * @rx_thr_num_pkt: USB receive packet count + * @rx_max_burst: max USB receive burst size + * @tx_thr_num_pkt: USB transmit packet count + * @tx_max_burst: max USB transmit burst size * @rx_thr_num_pkt_prd: periodic ESS receive packet count * @rx_max_burst_prd: max periodic ESS receive burst size * @tx_thr_num_pkt_prd: periodic ESS transmit packet count @@ -1106,6 +1117,8 @@ struct dwc3_scratchpad_array { * instances in park mode. * @parkmode_disable_hs_quirk: set if we need to disable all HishSpeed * instances in park mode. + * @gfladj_refclk_lpm_sel: set if we need to enable SOF/ITP counter + * running based on ref_clk * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -1156,6 +1169,8 @@ struct dwc3 { struct clk *bus_clk; struct clk *ref_clk; struct clk *susp_clk; + struct clk *utmi_clk; + struct clk *pipe_clk; struct reset_control *reset; @@ -1273,6 +1288,10 @@ struct dwc3 { u8 test_mode_nr; u8 lpm_nyet_threshold; u8 hird_threshold; + u8 rx_thr_num_pkt; + u8 rx_max_burst; + u8 tx_thr_num_pkt; + u8 tx_max_burst; u8 rx_thr_num_pkt_prd; u8 rx_max_burst_prd; u8 tx_thr_num_pkt_prd; diff --git a/drivers/usb/dwc3/dwc3-rtk.c b/drivers/usb/dwc3/dwc3-rtk.c new file mode 100644 index 000000000000..590028e8fdcb --- /dev/null +++ b/drivers/usb/dwc3/dwc3-rtk.c @@ -0,0 +1,475 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dwc3-rtk.c - Realtek DWC3 Specific Glue layer + * + * Copyright (C) 2023 Realtek Semiconductor Corporation + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/suspend.h> +#include <linux/sys_soc.h> +#include <linux/usb/otg.h> +#include <linux/usb/of.h> +#include <linux/usb/role.h> + +#include "core.h" + +#define WRAP_CTR_REG 0x0 +#define DISABLE_MULTI_REQ BIT(1) +#define DESC_R2W_MULTI_DISABLE BIT(9) +#define FORCE_PIPE3_PHY_STATUS_TO_0 BIT(13) + +#define WRAP_USB2_PHY_UTMI_REG 0x8 +#define TXHSVM_EN BIT(3) + +#define WRAP_PHY_PIPE_REG 0xC +#define RESET_DISABLE_PIPE3_P0 BIT(0) +#define CLOCK_ENABLE_FOR_PIPE3_PCLK BIT(1) + +#define WRAP_USB_HMAC_CTR0_REG 0x60 +#define U3PORT_DIS BIT(8) + +#define WRAP_USB2_PHY_REG 0x70 +#define USB2_PHY_EN_PHY_PLL_PORT0 BIT(12) +#define USB2_PHY_EN_PHY_PLL_PORT1 BIT(13) +#define USB2_PHY_SWITCH_MASK 0x707 +#define USB2_PHY_SWITCH_DEVICE 0x0 +#define USB2_PHY_SWITCH_HOST 0x606 + +#define WRAP_APHY_REG 0x128 +#define USB3_MBIAS_ENABLE BIT(1) + +/* pm control */ +#define WRAP_USB_DBUS_PWR_CTRL_REG 0x160 +#define USB_DBUS_PWR_CTRL_REG 0x0 +#define DBUS_PWR_CTRL_EN BIT(0) + +struct dwc3_rtk { + struct device *dev; + void __iomem *regs; + size_t regs_size; + void __iomem *pm_base; + + struct dwc3 *dwc; + + enum usb_role cur_role; + struct usb_role_switch *role_switch; +}; + +static void switch_usb2_role(struct dwc3_rtk *rtk, enum usb_role role) +{ + void __iomem *reg; + int val; + + reg = rtk->regs + WRAP_USB2_PHY_REG; + val = ~USB2_PHY_SWITCH_MASK & readl(reg); + + switch (role) { + case USB_ROLE_DEVICE: + writel(USB2_PHY_SWITCH_DEVICE | val, reg); + break; + case USB_ROLE_HOST: + writel(USB2_PHY_SWITCH_HOST | val, reg); + break; + default: + dev_dbg(rtk->dev, "%s: role=%d\n", __func__, role); + break; + } +} + +static void switch_dwc3_role(struct dwc3_rtk *rtk, enum usb_role role) +{ + if (!rtk->dwc->role_sw) + return; + + usb_role_switch_set_role(rtk->dwc->role_sw, role); +} + +static enum usb_role dwc3_rtk_get_role(struct dwc3_rtk *rtk) +{ + enum usb_role role; + + role = rtk->cur_role; + + if (rtk->dwc && rtk->dwc->role_sw) + role = usb_role_switch_get_role(rtk->dwc->role_sw); + else + dev_dbg(rtk->dev, "%s not usb_role_switch role=%d\n", __func__, role); + + return role; +} + +static void dwc3_rtk_set_role(struct dwc3_rtk *rtk, enum usb_role role) +{ + rtk->cur_role = role; + + switch_dwc3_role(rtk, role); + mdelay(10); + switch_usb2_role(rtk, role); +} + +#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH) +static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, enum usb_role role) +{ + struct dwc3_rtk *rtk = usb_role_switch_get_drvdata(sw); + + dwc3_rtk_set_role(rtk, role); + + return 0; +} + +static enum usb_role dwc3_usb_role_switch_get(struct usb_role_switch *sw) +{ + struct dwc3_rtk *rtk = usb_role_switch_get_drvdata(sw); + + return dwc3_rtk_get_role(rtk); +} + +static int dwc3_rtk_setup_role_switch(struct dwc3_rtk *rtk) +{ + struct usb_role_switch_desc dwc3_role_switch = {NULL}; + + dwc3_role_switch.name = dev_name(rtk->dev); + dwc3_role_switch.driver_data = rtk; + dwc3_role_switch.allow_userspace_control = true; + dwc3_role_switch.fwnode = dev_fwnode(rtk->dev); + dwc3_role_switch.set = dwc3_usb_role_switch_set; + dwc3_role_switch.get = dwc3_usb_role_switch_get; + rtk->role_switch = usb_role_switch_register(rtk->dev, &dwc3_role_switch); + if (IS_ERR(rtk->role_switch)) + return PTR_ERR(rtk->role_switch); + + return 0; +} + +static int dwc3_rtk_remove_role_switch(struct dwc3_rtk *rtk) +{ + if (rtk->role_switch) + usb_role_switch_unregister(rtk->role_switch); + + rtk->role_switch = NULL; + + return 0; +} +#else +#define dwc3_rtk_setup_role_switch(x) 0 +#define dwc3_rtk_remove_role_switch(x) 0 +#endif + +static const char *const speed_names[] = { + [USB_SPEED_UNKNOWN] = "UNKNOWN", + [USB_SPEED_LOW] = "low-speed", + [USB_SPEED_FULL] = "full-speed", + [USB_SPEED_HIGH] = "high-speed", + [USB_SPEED_WIRELESS] = "wireless", + [USB_SPEED_SUPER] = "super-speed", + [USB_SPEED_SUPER_PLUS] = "super-speed-plus", +}; + +static enum usb_device_speed __get_dwc3_maximum_speed(struct device_node *np) +{ + struct device_node *dwc3_np; + const char *maximum_speed; + int ret; + + dwc3_np = of_get_compatible_child(np, "snps,dwc3"); + if (!dwc3_np) + return USB_SPEED_UNKNOWN; + + ret = of_property_read_string(dwc3_np, "maximum-speed", &maximum_speed); + if (ret < 0) + return USB_SPEED_UNKNOWN; + + ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed); + + return (ret < 0) ? USB_SPEED_UNKNOWN : ret; +} + +static int dwc3_rtk_init(struct dwc3_rtk *rtk) +{ + struct device *dev = rtk->dev; + void __iomem *reg; + int val; + enum usb_device_speed maximum_speed; + const struct soc_device_attribute rtk_soc_kylin_a00[] = { + { .family = "Realtek Kylin", .revision = "A00", }, + { /* empty */ } }; + const struct soc_device_attribute rtk_soc_hercules[] = { + { .family = "Realtek Hercules", }, { /* empty */ } }; + const struct soc_device_attribute rtk_soc_thor[] = { + { .family = "Realtek Thor", }, { /* empty */ } }; + + if (soc_device_match(rtk_soc_kylin_a00)) { + reg = rtk->regs + WRAP_CTR_REG; + val = readl(reg); + writel(DISABLE_MULTI_REQ | val, reg); + dev_info(dev, "[bug fixed] 1295/1296 A00: add workaround to disable multiple request for D-Bus"); + } + + if (soc_device_match(rtk_soc_hercules)) { + reg = rtk->regs + WRAP_USB2_PHY_REG; + val = readl(reg); + writel(USB2_PHY_EN_PHY_PLL_PORT1 | val, reg); + dev_info(dev, "[bug fixed] 1395 add workaround to disable usb2 port 2 suspend!"); + } + + reg = rtk->regs + WRAP_USB2_PHY_UTMI_REG; + val = readl(reg); + writel(TXHSVM_EN | val, reg); + + maximum_speed = __get_dwc3_maximum_speed(dev->of_node); + if (maximum_speed != USB_SPEED_UNKNOWN && maximum_speed <= USB_SPEED_HIGH) { + if (soc_device_match(rtk_soc_thor)) { + reg = rtk->regs + WRAP_USB_HMAC_CTR0_REG; + val = readl(reg); + writel(U3PORT_DIS | val, reg); + } else { + reg = rtk->regs + WRAP_CTR_REG; + val = readl(reg); + writel(FORCE_PIPE3_PHY_STATUS_TO_0 | val, reg); + + reg = rtk->regs + WRAP_PHY_PIPE_REG; + val = ~CLOCK_ENABLE_FOR_PIPE3_PCLK & readl(reg); + writel(RESET_DISABLE_PIPE3_P0 | val, reg); + + reg = rtk->regs + WRAP_USB_HMAC_CTR0_REG; + val = readl(reg); + writel(U3PORT_DIS | val, reg); + + reg = rtk->regs + WRAP_APHY_REG; + val = readl(reg); + writel(~USB3_MBIAS_ENABLE & val, reg); + + dev_dbg(rtk->dev, "%s: disable usb 3.0 phy\n", __func__); + } + } + + reg = rtk->regs + WRAP_CTR_REG; + val = readl(reg); + writel(DESC_R2W_MULTI_DISABLE | val, reg); + + /* Set phy Dp/Dm initial state to host mode to avoid the Dp glitch */ + reg = rtk->regs + WRAP_USB2_PHY_REG; + val = ~USB2_PHY_SWITCH_MASK & readl(reg); + writel(USB2_PHY_SWITCH_HOST | val, reg); + + if (rtk->pm_base) { + reg = rtk->pm_base + USB_DBUS_PWR_CTRL_REG; + val = DBUS_PWR_CTRL_EN | readl(reg); + writel(val, reg); + } + + return 0; +} + +static int dwc3_rtk_probe_dwc3_core(struct dwc3_rtk *rtk) +{ + struct device *dev = rtk->dev; + struct device_node *node = dev->of_node; + struct platform_device *dwc3_pdev; + struct device *dwc3_dev; + struct device_node *dwc3_node; + enum usb_dr_mode dr_mode; + int ret = 0; + + ret = dwc3_rtk_init(rtk); + if (ret) + return -EINVAL; + + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to add dwc3 core\n"); + return ret; + } + + dwc3_node = of_get_compatible_child(node, "snps,dwc3"); + if (!dwc3_node) { + dev_err(dev, "failed to find dwc3 core node\n"); + ret = -ENODEV; + goto depopulate; + } + + dwc3_pdev = of_find_device_by_node(dwc3_node); + if (!dwc3_pdev) { + dev_err(dev, "failed to find dwc3 core platform_device\n"); + ret = -ENODEV; + goto err_node_put; + } + + dwc3_dev = &dwc3_pdev->dev; + rtk->dwc = platform_get_drvdata(dwc3_pdev); + if (!rtk->dwc) { + dev_err(dev, "failed to find dwc3 core\n"); + ret = -ENODEV; + goto err_pdev_put; + } + + dr_mode = usb_get_dr_mode(dwc3_dev); + if (dr_mode != rtk->dwc->dr_mode) { + dev_info(dev, "dts set dr_mode=%d, but dwc3 set dr_mode=%d\n", + dr_mode, rtk->dwc->dr_mode); + dr_mode = rtk->dwc->dr_mode; + } + + switch (dr_mode) { + case USB_DR_MODE_PERIPHERAL: + rtk->cur_role = USB_ROLE_DEVICE; + break; + case USB_DR_MODE_HOST: + rtk->cur_role = USB_ROLE_HOST; + break; + default: + dev_dbg(rtk->dev, "%s: dr_mode=%d\n", __func__, dr_mode); + break; + } + + if (device_property_read_bool(dwc3_dev, "usb-role-switch")) { + ret = dwc3_rtk_setup_role_switch(rtk); + if (ret) { + dev_err(dev, "dwc3_rtk_setup_role_switch fail=%d\n", ret); + goto err_pdev_put; + } + rtk->cur_role = dwc3_rtk_get_role(rtk); + } + + switch_usb2_role(rtk, rtk->cur_role); + + return 0; + +err_pdev_put: + platform_device_put(dwc3_pdev); +err_node_put: + of_node_put(dwc3_node); +depopulate: + of_platform_depopulate(dev); + + return ret; +} + +static int dwc3_rtk_probe(struct platform_device *pdev) +{ + struct dwc3_rtk *rtk; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *regs; + int ret = 0; + + rtk = devm_kzalloc(dev, sizeof(*rtk), GFP_KERNEL); + if (!rtk) { + ret = -ENOMEM; + goto out; + } + + platform_set_drvdata(pdev, rtk); + + rtk->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing memory resource\n"); + ret = -ENODEV; + goto out; + } + + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + goto out; + } + + rtk->regs = regs; + rtk->regs_size = resource_size(res); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) { + rtk->pm_base = devm_ioremap_resource(dev, res); + if (IS_ERR(rtk->pm_base)) { + ret = PTR_ERR(rtk->pm_base); + goto out; + } + } + + ret = dwc3_rtk_probe_dwc3_core(rtk); + +out: + return ret; +} + +static void dwc3_rtk_remove(struct platform_device *pdev) +{ + struct dwc3_rtk *rtk = platform_get_drvdata(pdev); + + rtk->dwc = NULL; + + dwc3_rtk_remove_role_switch(rtk); + + of_platform_depopulate(rtk->dev); +} + +static void dwc3_rtk_shutdown(struct platform_device *pdev) +{ + struct dwc3_rtk *rtk = platform_get_drvdata(pdev); + + of_platform_depopulate(rtk->dev); +} + +static const struct of_device_id rtk_dwc3_match[] = { + { .compatible = "realtek,rtd-dwc3" }, + {}, +}; +MODULE_DEVICE_TABLE(of, rtk_dwc3_match); + +#ifdef CONFIG_PM_SLEEP +static int dwc3_rtk_suspend(struct device *dev) +{ + return 0; +} + +static int dwc3_rtk_resume(struct device *dev) +{ + struct dwc3_rtk *rtk = dev_get_drvdata(dev); + + dwc3_rtk_init(rtk); + + switch_usb2_role(rtk, rtk->cur_role); + + /* runtime set active to reflect active state. */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} + +static const struct dev_pm_ops dwc3_rtk_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_rtk_suspend, dwc3_rtk_resume) +}; + +#define DEV_PM_OPS (&dwc3_rtk_dev_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct platform_driver dwc3_rtk_driver = { + .probe = dwc3_rtk_probe, + .remove_new = dwc3_rtk_remove, + .driver = { + .name = "rtk-dwc3", + .of_match_table = rtk_dwc3_match, + .pm = DEV_PM_OPS, + }, + .shutdown = dwc3_rtk_shutdown, +}; + +module_platform_driver(dwc3_rtk_driver); + +MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>"); +MODULE_DESCRIPTION("DesignWare USB3 Realtek Glue Layer"); +MODULE_ALIAS("platform:rtk-dwc3"); +MODULE_LICENSE("GPL"); +MODULE_SOFTDEP("pre: phy_rtk_usb2 phy_rtk_usb3"); diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c index 19307d24f3a0..5b7e92f476de 100644 --- a/drivers/usb/dwc3/dwc3-xilinx.c +++ b/drivers/usb/dwc3/dwc3-xilinx.c @@ -32,9 +32,6 @@ #define XLNX_USB_TRAFFIC_ROUTE_CONFIG 0x005C #define XLNX_USB_TRAFFIC_ROUTE_FPD 0x1 -/* Versal USB Reset ID */ -#define VERSAL_USB_RESET_ID 0xC104036 - #define XLNX_USB_FPD_PIPE_CLK 0x7c #define PIPE_CLK_DESELECT 1 #define PIPE_CLK_SELECT 0 @@ -72,20 +69,23 @@ static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask) static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data) { struct device *dev = priv_data->dev; + struct reset_control *crst; int ret; + crst = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(crst)) + return dev_err_probe(dev, PTR_ERR(crst), "failed to get reset signal\n"); + dwc3_xlnx_mask_phy_rst(priv_data, false); /* Assert and De-assert reset */ - ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID, - PM_RESET_ACTION_ASSERT); + ret = reset_control_assert(crst); if (ret < 0) { dev_err_probe(dev, ret, "failed to assert Reset\n"); return ret; } - ret = zynqmp_pm_reset_assert(VERSAL_USB_RESET_ID, - PM_RESET_ACTION_RELEASE); + ret = reset_control_deassert(crst); if (ret < 0) { dev_err_probe(dev, ret, "failed to De-assert Reset\n"); return ret; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index e6ab8cc225ff..cc0ed29a4adc 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1410,7 +1410,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) struct usb_composite_dev *cdev = c->cdev; struct f_ncm *ncm = func_to_ncm(f); struct usb_string *us; - int status; + int status = 0; struct usb_ep *ep; struct f_ncm_opts *ncm_opts; @@ -1428,22 +1428,17 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) f->os_desc_table[0].os_desc = &ncm_opts->ncm_os_desc; } - /* - * in drivers/usb/gadget/configfs.c:configfs_composite_bind() - * configurations are bound in sequence with list_for_each_entry, - * in each configuration its functions are bound in sequence - * with list_for_each_entry, so we assume no race condition - * with regard to ncm_opts->bound access - */ - if (!ncm_opts->bound) { - mutex_lock(&ncm_opts->lock); - gether_set_gadget(ncm_opts->net, cdev->gadget); + mutex_lock(&ncm_opts->lock); + gether_set_gadget(ncm_opts->net, cdev->gadget); + if (!ncm_opts->bound) status = gether_register_netdev(ncm_opts->net); - mutex_unlock(&ncm_opts->lock); - if (status) - goto fail; - ncm_opts->bound = true; - } + mutex_unlock(&ncm_opts->lock); + + if (status) + goto fail; + + ncm_opts->bound = true; + us = usb_gstrings_attach(cdev, ncm_strings, ARRAY_SIZE(ncm_string_defs)); if (IS_ERR(us)) { diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 0219cd79493a..f9a0f07a7476 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -212,7 +212,7 @@ static struct uac2_input_terminal_descriptor io_in_it_desc = { .bDescriptorSubtype = UAC_INPUT_TERMINAL, /* .bTerminalID = DYNAMIC */ - .wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_MICROPHONE), + /* .wTerminalType = DYNAMIC */ .bAssocTerminal = 0, /* .bCSourceID = DYNAMIC */ .iChannelNames = 0, @@ -240,7 +240,7 @@ static struct uac2_output_terminal_descriptor io_out_ot_desc = { .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, /* .bTerminalID = DYNAMIC */ - .wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_SPEAKER), + /* .wTerminalType = DYNAMIC */ .bAssocTerminal = 0, /* .bSourceID = DYNAMIC */ /* .bCSourceID = DYNAMIC */ @@ -977,6 +977,9 @@ static void setup_descriptor(struct f_uac2_opts *opts) iad_desc.bInterfaceCount++; } + io_in_it_desc.wTerminalType = cpu_to_le16(opts->c_terminal_type); + io_out_ot_desc.wTerminalType = cpu_to_le16(opts->p_terminal_type); + setup_headers(opts, fs_audio_desc, USB_SPEED_FULL); setup_headers(opts, hs_audio_desc, USB_SPEED_HIGH); setup_headers(opts, ss_audio_desc, USB_SPEED_SUPER); @@ -2095,6 +2098,9 @@ UAC2_ATTRIBUTE(s16, c_volume_res); UAC2_ATTRIBUTE(u32, fb_max); UAC2_ATTRIBUTE_STRING(function_name); +UAC2_ATTRIBUTE(s16, p_terminal_type); +UAC2_ATTRIBUTE(s16, c_terminal_type); + static struct configfs_attribute *f_uac2_attrs[] = { &f_uac2_opts_attr_p_chmask, &f_uac2_opts_attr_p_srate, @@ -2122,6 +2128,9 @@ static struct configfs_attribute *f_uac2_attrs[] = { &f_uac2_opts_attr_function_name, + &f_uac2_opts_attr_p_terminal_type, + &f_uac2_opts_attr_c_terminal_type, + NULL, }; @@ -2180,6 +2189,9 @@ static struct usb_function_instance *afunc_alloc_inst(void) snprintf(opts->function_name, sizeof(opts->function_name), "Source/Sink"); + opts->p_terminal_type = UAC2_DEF_P_TERM_TYPE; + opts->c_terminal_type = UAC2_DEF_C_TERM_TYPE; + return &opts->func_inst; } diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index faa398109431..786379f1b7b7 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -516,6 +516,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) void *mem; switch (speed) { + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: uvc_control_desc = uvc->desc.ss_control; uvc_streaming_cls = uvc->desc.ss_streaming; @@ -564,7 +565,8 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) bytes += uvc_interrupt_ep.bLength + uvc_interrupt_cs_ep.bLength; n_desc += 2; - if (speed == USB_SPEED_SUPER) { + if (speed == USB_SPEED_SUPER || + speed == USB_SPEED_SUPER_PLUS) { bytes += uvc_ss_interrupt_comp.bLength; n_desc += 1; } @@ -619,7 +621,8 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) if (uvc->enable_interrupt_ep) { UVC_COPY_DESCRIPTOR(mem, dst, &uvc_interrupt_ep); - if (speed == USB_SPEED_SUPER) + if (speed == USB_SPEED_SUPER || + speed == USB_SPEED_SUPER_PLUS) UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_interrupt_comp); UVC_COPY_DESCRIPTOR(mem, dst, &uvc_interrupt_cs_ep); @@ -795,6 +798,13 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) goto error; } + f->ssp_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER_PLUS); + if (IS_ERR(f->ssp_descriptors)) { + ret = PTR_ERR(f->ssp_descriptors); + f->ssp_descriptors = NULL; + goto error; + } + /* Preallocate control endpoint request. */ uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL); uvc->control_buf = kmalloc(UVC_MAX_REQUEST_SIZE, GFP_KERNEL); diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 4bb0553da658..9d1c40c152d8 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -1200,7 +1200,7 @@ void gether_disconnect(struct gether *link) DBG(dev, "%s\n", __func__); - netif_stop_queue(dev->net); + netif_device_detach(dev->net); netif_carrier_off(dev->net); /* disable endpoints, forcing (synchronous) completion diff --git a/drivers/usb/gadget/function/u_uac2.h b/drivers/usb/gadget/function/u_uac2.h index 0510c9bad58d..5e81bdd6c5fb 100644 --- a/drivers/usb/gadget/function/u_uac2.h +++ b/drivers/usb/gadget/function/u_uac2.h @@ -35,6 +35,11 @@ #define UAC2_DEF_REQ_NUM 2 #define UAC2_DEF_INT_REQ_NUM 10 +#define UAC2_DEF_P_TERM_TYPE 0x301 + /* UAC_OUTPUT_TERMINAL_SPEAKER */ +#define UAC2_DEF_C_TERM_TYPE 0x201 + /* UAC_INPUT_TERMINAL_MICROPHONE*/ + struct f_uac2_opts { struct usb_function_instance func_inst; int p_chmask; @@ -65,6 +70,9 @@ struct f_uac2_opts { char function_name[32]; + s16 p_terminal_type; + s16 c_terminal_type; + struct mutex lock; int refcnt; }; diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index cdc0926100fd..03179b1880fd 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -31,6 +31,12 @@ #include <linux/usb/gadgetfs.h> #include <linux/usb/gadget.h> +#include <linux/usb/composite.h> /* for USB_GADGET_DELAYED_STATUS */ + +/* Undef helpers from linux/usb/composite.h as gadgetfs redefines them */ +#undef DBG +#undef ERROR +#undef INFO /* @@ -1511,7 +1517,16 @@ delegate: event->u.setup = *ctrl; ep0_readable (dev); spin_unlock (&dev->lock); - return 0; + /* + * Return USB_GADGET_DELAYED_STATUS as a workaround to + * stop some UDC drivers (e.g. dwc3) from automatically + * proceeding with the status stage for 0-length + * transfers. + * Should be removed once all UDC drivers are fixed to + * always delay the status stage until a response is + * queued to EP0. + */ + return w_length == 0 ? USB_GADGET_DELAYED_STATUS : 0; } } diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c index e549022642e5..399fca32a8ac 100644 --- a/drivers/usb/gadget/legacy/raw_gadget.c +++ b/drivers/usb/gadget/legacy/raw_gadget.c @@ -25,6 +25,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/ch11.h> #include <linux/usb/gadget.h> +#include <linux/usb/composite.h> #include <uapi/linux/usb/raw_gadget.h> @@ -64,7 +65,7 @@ static int raw_event_queue_add(struct raw_event_queue *queue, struct usb_raw_event *event; spin_lock_irqsave(&queue->lock, flags); - if (WARN_ON(queue->size >= RAW_EVENT_QUEUE_SIZE)) { + if (queue->size >= RAW_EVENT_QUEUE_SIZE) { spin_unlock_irqrestore(&queue->lock, flags); return -ENOMEM; } @@ -310,9 +311,10 @@ static int gadget_bind(struct usb_gadget *gadget, dev->eps_num = i; spin_unlock_irqrestore(&dev->lock, flags); + dev_dbg(&gadget->dev, "gadget connected\n"); ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL); if (ret < 0) { - dev_err(&gadget->dev, "failed to queue event\n"); + dev_err(&gadget->dev, "failed to queue connect event\n"); set_gadget_data(gadget, NULL); return ret; } @@ -357,20 +359,65 @@ static int gadget_setup(struct usb_gadget *gadget, ret = raw_queue_event(dev, USB_RAW_EVENT_CONTROL, sizeof(*ctrl), ctrl); if (ret < 0) - dev_err(&gadget->dev, "failed to queue event\n"); + dev_err(&gadget->dev, "failed to queue control event\n"); goto out; out_unlock: spin_unlock_irqrestore(&dev->lock, flags); out: + if (ret == 0 && ctrl->wLength == 0) { + /* + * Return USB_GADGET_DELAYED_STATUS as a workaround to stop + * some UDC drivers (e.g. dwc3) from automatically proceeding + * with the status stage for 0-length transfers. + * Should be removed once all UDC drivers are fixed to always + * delay the status stage until a response is queued to EP0. + */ + return USB_GADGET_DELAYED_STATUS; + } return ret; } -/* These are currently unused but present in case UDC driver requires them. */ -static void gadget_disconnect(struct usb_gadget *gadget) { } -static void gadget_suspend(struct usb_gadget *gadget) { } -static void gadget_resume(struct usb_gadget *gadget) { } -static void gadget_reset(struct usb_gadget *gadget) { } +static void gadget_disconnect(struct usb_gadget *gadget) +{ + struct raw_dev *dev = get_gadget_data(gadget); + int ret; + + dev_dbg(&gadget->dev, "gadget disconnected\n"); + ret = raw_queue_event(dev, USB_RAW_EVENT_DISCONNECT, 0, NULL); + if (ret < 0) + dev_err(&gadget->dev, "failed to queue disconnect event\n"); +} +static void gadget_suspend(struct usb_gadget *gadget) +{ + struct raw_dev *dev = get_gadget_data(gadget); + int ret; + + dev_dbg(&gadget->dev, "gadget suspended\n"); + ret = raw_queue_event(dev, USB_RAW_EVENT_SUSPEND, 0, NULL); + if (ret < 0) + dev_err(&gadget->dev, "failed to queue suspend event\n"); +} +static void gadget_resume(struct usb_gadget *gadget) +{ + struct raw_dev *dev = get_gadget_data(gadget); + int ret; + + dev_dbg(&gadget->dev, "gadget resumed\n"); + ret = raw_queue_event(dev, USB_RAW_EVENT_RESUME, 0, NULL); + if (ret < 0) + dev_err(&gadget->dev, "failed to queue resume event\n"); +} +static void gadget_reset(struct usb_gadget *gadget) +{ + struct raw_dev *dev = get_gadget_data(gadget); + int ret; + + dev_dbg(&gadget->dev, "gadget reset\n"); + ret = raw_queue_event(dev, USB_RAW_EVENT_RESET, 0, NULL); + if (ret < 0) + dev_err(&gadget->dev, "failed to queue reset event\n"); +} /*----------------------------------------------------------------------*/ @@ -663,12 +710,12 @@ static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io, if (WARN_ON(in && dev->ep0_out_pending)) { ret = -ENODEV; dev->state = STATE_DEV_FAILED; - goto out_done; + goto out_unlock; } if (WARN_ON(!in && dev->ep0_in_pending)) { ret = -ENODEV; dev->state = STATE_DEV_FAILED; - goto out_done; + goto out_unlock; } dev->req->buf = data; @@ -682,8 +729,7 @@ static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io, dev_err(&dev->gadget->dev, "fail, usb_ep_queue returned %d\n", ret); spin_lock_irqsave(&dev->lock, flags); - dev->state = STATE_DEV_FAILED; - goto out_done; + goto out_queue_failed; } ret = wait_for_completion_interruptible(&dev->ep0_done); @@ -692,13 +738,16 @@ static int raw_process_ep0_io(struct raw_dev *dev, struct usb_raw_ep_io *io, usb_ep_dequeue(dev->gadget->ep0, dev->req); wait_for_completion(&dev->ep0_done); spin_lock_irqsave(&dev->lock, flags); - goto out_done; + if (dev->ep0_status == -ECONNRESET) + dev->ep0_status = -EINTR; + goto out_interrupted; } spin_lock_irqsave(&dev->lock, flags); - ret = dev->ep0_status; -out_done: +out_interrupted: + ret = dev->ep0_status; +out_queue_failed: dev->ep0_urb_queued = false; out_unlock: spin_unlock_irqrestore(&dev->lock, flags); @@ -1066,8 +1115,7 @@ static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io, dev_err(&dev->gadget->dev, "fail, usb_ep_queue returned %d\n", ret); spin_lock_irqsave(&dev->lock, flags); - dev->state = STATE_DEV_FAILED; - goto out_done; + goto out_queue_failed; } ret = wait_for_completion_interruptible(&done); @@ -1076,13 +1124,16 @@ static int raw_process_ep_io(struct raw_dev *dev, struct usb_raw_ep_io *io, usb_ep_dequeue(ep->ep, ep->req); wait_for_completion(&done); spin_lock_irqsave(&dev->lock, flags); - goto out_done; + if (ep->status == -ECONNRESET) + ep->status = -EINTR; + goto out_interrupted; } spin_lock_irqsave(&dev->lock, flags); - ret = ep->status; -out_done: +out_interrupted: + ret = ep->status; +out_queue_failed: ep->urb_queued = false; out_unlock: spin_unlock_irqrestore(&dev->lock, flags); diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c index 2ef89a442f50..3916c8e2ba01 100644 --- a/drivers/usb/gadget/udc/aspeed_udc.c +++ b/drivers/usb/gadget/udc/aspeed_udc.c @@ -1432,15 +1432,24 @@ static void ast_udc_init_hw(struct ast_udc_dev *udc) ast_udc_write(udc, 0, AST_UDC_EP0_CTRL); } -static int ast_udc_remove(struct platform_device *pdev) +static void ast_udc_remove(struct platform_device *pdev) { struct ast_udc_dev *udc = platform_get_drvdata(pdev); unsigned long flags; u32 ctrl; usb_del_gadget_udc(&udc->gadget); - if (udc->driver) - return -EBUSY; + if (udc->driver) { + /* + * This is broken as only some cleanup is skipped, *udev is + * freed and the register mapping goes away. Any further usage + * probably crashes. Also the device is unbound, so the skipped + * cleanup is never catched up later. + */ + dev_alert(&pdev->dev, + "Driver is busy and still going away. Fasten your seat belts!\n"); + return; + } spin_lock_irqsave(&udc->lock, flags); @@ -1459,8 +1468,6 @@ static int ast_udc_remove(struct platform_device *pdev) udc->ep0_buf_dma); udc->ep0_buf = NULL; - - return 0; } static int ast_udc_probe(struct platform_device *pdev) @@ -1581,7 +1588,7 @@ MODULE_DEVICE_TABLE(of, ast_udc_of_dt_ids); static struct platform_driver ast_udc_driver = { .probe = ast_udc_probe, - .remove = ast_udc_remove, + .remove_new = ast_udc_remove, .driver = { .name = KBUILD_MODNAME, .of_match_table = ast_udc_of_dt_ids, diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index 922b4187004b..30ea4a9d5301 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -2000,6 +2000,7 @@ static int at91udc_resume(struct platform_device *pdev) #endif static struct platform_driver at91_udc_driver = { + .probe = at91udc_probe, .remove = at91udc_remove, .shutdown = at91udc_shutdown, .suspend = at91udc_suspend, @@ -2010,7 +2011,7 @@ static struct platform_driver at91_udc_driver = { }, }; -module_platform_driver_probe(at91_udc_driver, at91udc_probe); +module_platform_driver(at91_udc_driver); MODULE_DESCRIPTION("AT91 udc driver"); MODULE_AUTHOR("Thomas Rathbone, David Brownell"); diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 7166d1117742..ded9531f141b 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1126,12 +1126,12 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state); /* ------------------------------------------------------------------------- */ /* Acquire connect_lock before calling this function. */ -static void usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock) +static int usb_udc_connect_control_locked(struct usb_udc *udc) __must_hold(&udc->connect_lock) { if (udc->vbus) - usb_gadget_connect_locked(udc->gadget); + return usb_gadget_connect_locked(udc->gadget); else - usb_gadget_disconnect_locked(udc->gadget); + return usb_gadget_disconnect_locked(udc->gadget); } static void vbus_event_work(struct work_struct *work) @@ -1605,12 +1605,23 @@ static int gadget_bind_driver(struct device *dev) } usb_gadget_enable_async_callbacks(udc); udc->allow_connect = true; - usb_udc_connect_control_locked(udc); + ret = usb_udc_connect_control_locked(udc); + if (ret) + goto err_connect_control; + mutex_unlock(&udc->connect_lock); kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); return 0; + err_connect_control: + udc->allow_connect = false; + usb_gadget_disable_async_callbacks(udc); + if (gadget->irq) + synchronize_irq(gadget->irq); + usb_gadget_udc_stop_locked(udc); + mutex_unlock(&udc->connect_lock); + err_start: driver->unbind(udc->gadget); diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 4aae86b47edf..4e88681a79b6 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -27,9 +27,10 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/moduleparam.h> +#include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/of_platform.h> +#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -2471,17 +2472,12 @@ static const struct of_device_id qe_udc_match[]; static int qe_udc_probe(struct platform_device *ofdev) { struct qe_udc *udc; - const struct of_device_id *match; struct device_node *np = ofdev->dev.of_node; struct qe_ep *ep; unsigned int ret = 0; unsigned int i; const void *prop; - match = of_match_device(qe_udc_match, &ofdev->dev); - if (!match) - return -EINVAL; - prop = of_get_property(np, "mode", NULL); if (!prop || strcmp(prop, "peripheral")) return -ENODEV; @@ -2493,7 +2489,7 @@ static int qe_udc_probe(struct platform_device *ofdev) return -ENOMEM; } - udc->soc_type = (unsigned long)match->data; + udc->soc_type = (unsigned long)device_get_match_data(&ofdev->dev); udc->usb_regs = of_iomap(np, 0); if (!udc->usb_regs) { ret = -ENOMEM; diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index ee5705d336e3..2693a10eb0c7 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -2666,6 +2666,7 @@ static const struct platform_device_id fsl_udc_devtype[] = { }; MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); static struct platform_driver udc_driver = { + .probe = fsl_udc_probe, .remove = fsl_udc_remove, .id_table = fsl_udc_devtype, /* these suspend and resume are not usb suspend and resume */ @@ -2679,7 +2680,7 @@ static struct platform_driver udc_driver = { }, }; -module_platform_driver_probe(udc_driver, fsl_udc_probe); +module_platform_driver(udc_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c index bd03d475f927..873265634ccc 100644 --- a/drivers/usb/gadget/udc/fusb300_udc.c +++ b/drivers/usb/gadget/udc/fusb300_udc.c @@ -1506,10 +1506,11 @@ clean_up: } static struct platform_driver fusb300_driver = { - .remove_new = fusb300_remove, - .driver = { + .probe = fusb300_probe, + .remove_new = fusb300_remove, + .driver = { .name = udc_name, }, }; -module_platform_driver_probe(fusb300_driver, fusb300_probe); +module_platform_driver(fusb300_driver); diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index fe62db32dd0e..a917cc9a32ab 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -3254,6 +3254,7 @@ MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match); #endif static struct platform_driver lpc32xx_udc_driver = { + .probe = lpc32xx_udc_probe, .remove = lpc32xx_udc_remove, .shutdown = lpc32xx_udc_shutdown, .suspend = lpc32xx_udc_suspend, @@ -3264,7 +3265,7 @@ static struct platform_driver lpc32xx_udc_driver = { }, }; -module_platform_driver_probe(lpc32xx_udc_driver, lpc32xx_udc_probe); +module_platform_driver(lpc32xx_udc_driver); MODULE_DESCRIPTION("LPC32XX udc driver"); MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c index e05f45a4b56b..bfaa5291e6c8 100644 --- a/drivers/usb/gadget/udc/m66592-udc.c +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -1687,10 +1687,11 @@ clean_up: /*-------------------------------------------------------------------------*/ static struct platform_driver m66592_driver = { + .probe = m66592_probe, .remove_new = m66592_remove, .driver = { .name = udc_name, }, }; -module_platform_driver_probe(m66592_driver, m66592_probe); +module_platform_driver(m66592_driver); diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index 51b665f15c8e..db4a10a979f9 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1964,13 +1964,14 @@ clean_up2: /*-------------------------------------------------------------------------*/ static struct platform_driver r8a66597_driver = { + .probe = r8a66597_probe, .remove_new = r8a66597_remove, .driver = { .name = udc_name, }, }; -module_platform_driver_probe(r8a66597_driver, r8a66597_probe); +module_platform_driver(r8a66597_driver); MODULE_DESCRIPTION("R8A66597 USB gadget driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 2665832f9add..1f9c1b1435d8 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -60,6 +60,23 @@ #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ +/* ASMEDIA quirk use */ +#define ASMT_DATA_WRITE0_REG 0xF8 +#define ASMT_DATA_WRITE1_REG 0xFC +#define ASMT_CONTROL_REG 0xE0 +#define ASMT_CONTROL_WRITE_BIT 0x02 +#define ASMT_WRITEREG_CMD 0x10423 +#define ASMT_FLOWCTL_ADDR 0xFA30 +#define ASMT_FLOWCTL_DATA 0xBA +#define ASMT_PSEUDO_DATA 0 + +/* Intel quirk use */ +#define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB2PRM 0xD4 +#define USB_INTEL_USB3_PSSEN 0xD8 +#define USB_INTEL_USB3PRM 0xDC + +#ifdef CONFIG_USB_PCI_AMD /* AMD quirk use */ #define AB_REG_BAR_LOW 0xe0 #define AB_REG_BAR_HIGH 0xe1 @@ -93,21 +110,6 @@ #define NB_PIF0_PWRDOWN_0 0x01100012 #define NB_PIF0_PWRDOWN_1 0x01100013 -#define USB_INTEL_XUSB2PR 0xD0 -#define USB_INTEL_USB2PRM 0xD4 -#define USB_INTEL_USB3_PSSEN 0xD8 -#define USB_INTEL_USB3PRM 0xDC - -/* ASMEDIA quirk use */ -#define ASMT_DATA_WRITE0_REG 0xF8 -#define ASMT_DATA_WRITE1_REG 0xFC -#define ASMT_CONTROL_REG 0xE0 -#define ASMT_CONTROL_WRITE_BIT 0x02 -#define ASMT_WRITEREG_CMD 0x10423 -#define ASMT_FLOWCTL_ADDR 0xFA30 -#define ASMT_FLOWCTL_DATA 0xBA -#define ASMT_PSEUDO_DATA 0 - /* * amd_chipset_gen values represent AMD different chipset generations */ @@ -458,50 +460,6 @@ void usb_amd_quirk_pll_disable(void) } EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable); -static int usb_asmedia_wait_write(struct pci_dev *pdev) -{ - unsigned long retry_count; - unsigned char value; - - for (retry_count = 1000; retry_count > 0; --retry_count) { - - pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value); - - if (value == 0xff) { - dev_err(&pdev->dev, "%s: check_ready ERROR", __func__); - return -EIO; - } - - if ((value & ASMT_CONTROL_WRITE_BIT) == 0) - return 0; - - udelay(50); - } - - dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__); - return -ETIMEDOUT; -} - -void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) -{ - if (usb_asmedia_wait_write(pdev) != 0) - return; - - /* send command and address to device */ - pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD); - pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR); - pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); - - if (usb_asmedia_wait_write(pdev) != 0) - return; - - /* send data to device */ - pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA); - pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA); - pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); -} -EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol); - void usb_amd_quirk_pll_enable(void) { usb_amd_quirk_pll(0); @@ -630,7 +588,62 @@ bool usb_amd_pt_check_port(struct device *device, int port) return !(value & BIT(port_shift)); } EXPORT_SYMBOL_GPL(usb_amd_pt_check_port); +#endif /* CONFIG_USB_PCI_AMD */ + +static int usb_asmedia_wait_write(struct pci_dev *pdev) +{ + unsigned long retry_count; + unsigned char value; + + for (retry_count = 1000; retry_count > 0; --retry_count) { + + pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value); + + if (value == 0xff) { + dev_err(&pdev->dev, "%s: check_ready ERROR", __func__); + return -EIO; + } + + if ((value & ASMT_CONTROL_WRITE_BIT) == 0) + return 0; + + udelay(50); + } + + dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__); + return -ETIMEDOUT; +} + +void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) +{ + if (usb_asmedia_wait_write(pdev) != 0) + return; + /* send command and address to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); + + if (usb_asmedia_wait_write(pdev) != 0) + return; + + /* send data to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); +} +EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol); + +static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) +{ + u16 cmd; + + return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask); +} + +#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY) + +#if defined(CONFIG_HAS_IOPORT) && IS_ENABLED(CONFIG_USB_UHCI_HCD) /* * Make sure the controller is completely inactive, unable to * generate interrupts or do DMA. @@ -712,14 +725,7 @@ reset_needed: } EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc); -static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) -{ - u16 cmd; - return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask); -} - #define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO) -#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY) static void quirk_usb_handoff_uhci(struct pci_dev *pdev) { @@ -739,6 +745,12 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev) uhci_check_and_reset_hc(pdev, base); } +#else /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */ + +static void quirk_usb_handoff_uhci(struct pci_dev *pdev) {} + +#endif /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */ + static int mmio_resource_enabled(struct pci_dev *pdev, int idx) { return pci_resource_start(pdev, idx) && mmio_enabled(pdev); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index e729de21fad7..a5230b0b9e91 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -2,9 +2,7 @@ #ifndef __LINUX_USB_PCI_QUIRKS_H #define __LINUX_USB_PCI_QUIRKS_H -#ifdef CONFIG_USB_PCI -void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); -int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); +#ifdef CONFIG_USB_PCI_AMD int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev); bool usb_amd_hang_symptom_quirk(void); bool usb_amd_prefetch_quirk(void); @@ -12,23 +10,41 @@ void usb_amd_dev_put(void); bool usb_amd_quirk_pll_check(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); -void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); -void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); -void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); void sb800_prefetch(struct device *dev, int on); bool usb_amd_pt_check_port(struct device *device, int port); #else -struct pci_dev; +static inline bool usb_amd_hang_symptom_quirk(void) +{ + return false; +}; +static inline bool usb_amd_prefetch_quirk(void) +{ + return false; +} static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} -static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {} static inline void usb_amd_dev_put(void) {} -static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} +static inline bool usb_amd_quirk_pll_check(void) +{ + return false; +} static inline void sb800_prefetch(struct device *dev, int on) {} static inline bool usb_amd_pt_check_port(struct device *device, int port) { return false; } +#endif /* CONFIG_USB_PCI_AMD */ + +#ifdef CONFIG_USB_PCI +void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); +int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); +void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); +void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); +void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); +#else +struct pci_dev; +static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {} +static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} #endif /* CONFIG_USB_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index 99baa60ef50f..6d142cd61bd6 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -204,7 +204,7 @@ static void xhci_ring_dump_segment(struct seq_file *s, for (i = 0; i < TRBS_PER_SEGMENT; i++) { trb = &seg->trbs[i]; dma = seg->dma + i * sizeof(*trb); - seq_printf(s, "%pad: %s\n", &dma, + seq_printf(s, "%2u %pad: %s\n", seg->num, &dma, xhci_decode_trb(str, XHCI_MSG_MAX, le32_to_cpu(trb->generic.field[0]), le32_to_cpu(trb->generic.field[1]), le32_to_cpu(trb->generic.field[2]), diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index e8af0a125f84..96eb36a58738 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -79,6 +79,33 @@ /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ #define XHCI_STS_CNR (1 << 11) +/** + * struct xhci_protocol_caps + * @revision: major revision, minor revision, capability ID, + * and next capability pointer. + * @name_string: Four ASCII characters to say which spec this xHC + * follows, typically "USB ". + * @port_info: Port offset, count, and protocol-defined information. + */ +struct xhci_protocol_caps { + u32 revision; + u32 name_string; + u32 port_info; +}; + +#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) +#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f) +#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) +#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) + +#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f) +#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03) +#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03) +#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01) +#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03) +#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff) + #include <linux/io.h> /** diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0df5d807a77e..0980ade2a234 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1262,7 +1262,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, retval = -ENODEV; break; } - trace_xhci_get_port_status(wIndex, temp); + trace_xhci_get_port_status(port, temp); status = xhci_get_port_status(hcd, bus_state, wIndex, temp, &flags); if (status == 0xffffffff) @@ -1687,7 +1687,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) retval = -ENODEV; break; } - trace_xhci_hub_status_data(i, temp); + trace_xhci_hub_status_data(ports[i], temp); if ((temp & mask) != 0 || (bus_state->port_c_suspend & 1 << i) || diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 0a37f0d511cf..62116586848b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -29,6 +29,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, unsigned int cycle_state, unsigned int max_packet, + unsigned int num, gfp_t flags) { struct xhci_segment *seg; @@ -60,6 +61,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, for (i = 0; i < TRBS_PER_SEGMENT; i++) seg->trbs[i].link.control = cpu_to_le32(TRB_CYCLE); } + seg->num = num; seg->dma = dma; seg->next = NULL; @@ -128,7 +130,7 @@ static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring, struct xhci_segment *first, struct xhci_segment *last, unsigned int num_segs) { - struct xhci_segment *next; + struct xhci_segment *next, *seg; bool chain_links; if (!ring || !first || !last) @@ -144,13 +146,18 @@ static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring, xhci_link_segments(last, next, ring->type, chain_links); ring->num_segs += num_segs; - if (ring->type != TYPE_EVENT && ring->enq_seg == ring->last_seg) { - ring->last_seg->trbs[TRBS_PER_SEGMENT-1].link.control - &= ~cpu_to_le32(LINK_TOGGLE); - last->trbs[TRBS_PER_SEGMENT-1].link.control - |= cpu_to_le32(LINK_TOGGLE); + if (ring->enq_seg == ring->last_seg) { + if (ring->type != TYPE_EVENT) { + ring->last_seg->trbs[TRBS_PER_SEGMENT-1].link.control + &= ~cpu_to_le32(LINK_TOGGLE); + last->trbs[TRBS_PER_SEGMENT-1].link.control + |= cpu_to_le32(LINK_TOGGLE); + } ring->last_seg = last; } + + for (seg = last; seg != ring->last_seg; seg = seg->next) + seg->next->num = seg->num + 1; } /* @@ -320,8 +327,9 @@ void xhci_initialize_ring_info(struct xhci_ring *ring, /* Allocate segments and link them for a ring */ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, struct xhci_segment **first, struct xhci_segment **last, - unsigned int num_segs, unsigned int cycle_state, - enum xhci_ring_type type, unsigned int max_packet, gfp_t flags) + unsigned int num_segs, unsigned int num, + unsigned int cycle_state, enum xhci_ring_type type, + unsigned int max_packet, gfp_t flags) { struct xhci_segment *prev; bool chain_links; @@ -331,16 +339,17 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, (type == TYPE_ISOC && (xhci->quirks & XHCI_AMD_0x96_HOST))); - prev = xhci_segment_alloc(xhci, cycle_state, max_packet, flags); + prev = xhci_segment_alloc(xhci, cycle_state, max_packet, num, flags); if (!prev) return -ENOMEM; - num_segs--; + num++; *first = prev; - while (num_segs > 0) { + while (num < num_segs) { struct xhci_segment *next; - next = xhci_segment_alloc(xhci, cycle_state, max_packet, flags); + next = xhci_segment_alloc(xhci, cycle_state, max_packet, num, + flags); if (!next) { prev = *first; while (prev) { @@ -353,7 +362,7 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, xhci_link_segments(prev, next, type, chain_links); prev = next; - num_segs--; + num++; } xhci_link_segments(prev, *first, type, chain_links); *last = prev; @@ -388,7 +397,7 @@ struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, return ring; ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg, - &ring->last_seg, num_segs, cycle_state, type, + &ring->last_seg, num_segs, 0, cycle_state, type, max_packet, flags); if (ret) goto fail; @@ -428,7 +437,8 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, int ret; ret = xhci_alloc_segments_for_ring(xhci, &first, &last, - num_new_segs, ring->cycle_state, ring->type, + num_new_segs, ring->enq_seg->num + 1, + ring->cycle_state, ring->type, ring->bounce_buf_len, flags); if (ret) return -ENOMEM; @@ -1766,7 +1776,7 @@ void xhci_free_command(struct xhci_hcd *xhci, kfree(command); } -int xhci_alloc_erst(struct xhci_hcd *xhci, +static int xhci_alloc_erst(struct xhci_hcd *xhci, struct xhci_ring *evt_ring, struct xhci_erst *erst, gfp_t flags) @@ -1797,23 +1807,13 @@ int xhci_alloc_erst(struct xhci_hcd *xhci, } static void -xhci_free_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir) +xhci_remove_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir) { - struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - size_t erst_size; - u64 tmp64; u32 tmp; if (!ir) return; - erst_size = sizeof(struct xhci_erst_entry) * ir->erst.num_entries; - if (ir->erst.entries) - dma_free_coherent(dev, erst_size, - ir->erst.entries, - ir->erst.erst_dma_addr); - ir->erst.entries = NULL; - /* * Clean out interrupter registers except ERSTBA. Clearing either the * low or high 32 bits of ERSTBA immediately causes the controller to @@ -1824,14 +1824,30 @@ xhci_free_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir) tmp &= ERST_SIZE_MASK; writel(tmp, &ir->ir_set->erst_size); - tmp64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); - tmp64 &= (u64) ERST_PTR_MASK; - xhci_write_64(xhci, tmp64, &ir->ir_set->erst_dequeue); + xhci_write_64(xhci, ERST_EHB, &ir->ir_set->erst_dequeue); } +} - /* free interrrupter event ring */ +static void +xhci_free_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir) +{ + struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + size_t erst_size; + + if (!ir) + return; + + erst_size = sizeof(struct xhci_erst_entry) * ir->erst.num_entries; + if (ir->erst.entries) + dma_free_coherent(dev, erst_size, + ir->erst.entries, + ir->erst.erst_dma_addr); + ir->erst.entries = NULL; + + /* free interrupter event ring */ if (ir->event_ring) xhci_ring_free(xhci, ir->event_ring); + ir->event_ring = NULL; kfree(ir); @@ -1844,6 +1860,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) cancel_delayed_work_sync(&xhci->cmd_timer); + xhci_remove_interrupter(xhci, xhci->interrupter); xhci_free_interrupter(xhci, xhci->interrupter); xhci->interrupter = NULL; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed primary event ring"); @@ -1933,7 +1950,6 @@ no_bw: static void xhci_set_hc_event_deq(struct xhci_hcd *xhci, struct xhci_interrupter *ir) { - u64 temp; dma_addr_t deq; deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg, @@ -1941,16 +1957,12 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci, struct xhci_interrupter if (!deq) xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr.\n"); /* Update HC event ring dequeue pointer */ - temp = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); - temp &= ERST_PTR_MASK; /* Don't clear the EHB bit (which is RW1C) because * there might be more events to service. */ - temp &= ~ERST_EHB; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Write event ring dequeue pointer, preserving EHB bit"); - xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, - &ir->ir_set->erst_dequeue); + xhci_write_64(xhci, deq & ERST_PTR_MASK, &ir->ir_set->erst_dequeue); } static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, @@ -2238,14 +2250,18 @@ xhci_alloc_interrupter(struct xhci_hcd *xhci, gfp_t flags) { struct device *dev = xhci_to_hcd(xhci)->self.sysdev; struct xhci_interrupter *ir; + unsigned int num_segs; int ret; ir = kzalloc_node(sizeof(*ir), flags, dev_to_node(dev)); if (!ir) return NULL; - ir->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT, - 0, flags); + num_segs = min_t(unsigned int, 1 << HCS_ERST_MAX(xhci->hcs_params2), + ERST_MAX_SEGS); + + ir->event_ring = xhci_ring_alloc(xhci, num_segs, 1, TYPE_EVENT, 0, + flags); if (!ir->event_ring) { xhci_warn(xhci, "Failed to allocate interrupter event ring\n"); kfree(ir); @@ -2281,7 +2297,7 @@ xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir, /* set ERST count with the number of entries in the segment table */ erst_size = readl(&ir->ir_set->erst_size); erst_size &= ERST_SIZE_MASK; - erst_size |= ERST_NUM_SEGS; + erst_size |= ir->event_ring->num_segs; writel(erst_size, &ir->ir_set->erst_size); erst_base = xhci_read_64(xhci, &ir->ir_set->erst_base); diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 579899eb24c1..5b3cd455adec 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -19,6 +19,18 @@ #define HS_BW_BOUNDARY 6144 /* usb2 spec section11.18.1: at most 188 FS bytes per microframe */ #define FS_PAYLOAD_MAX 188 +#define LS_PAYLOAD_MAX 18 +/* section 11.18.1, per fs frame */ +#define FS_BW_BOUNDARY 1157 +#define LS_BW_BOUNDARY 144 + +/* + * max number of microframes for split transfer, assume extra-cs budget is 0 + * for fs isoc in : 1 ss + 1 idle + 6 cs (roundup(1023/188)) + */ +#define TT_MICROFRAMES_MAX 8 +/* offset from SS for fs/ls isoc/intr ep (ss + idle) */ +#define CS_OFFSET 2 #define DBG_BUF_EN 64 @@ -237,17 +249,26 @@ static void drop_tt(struct usb_device *udev) static struct mu3h_sch_ep_info * create_sch_ep(struct xhci_hcd_mtk *mtk, struct usb_device *udev, - struct usb_host_endpoint *ep) + struct usb_host_endpoint *ep, struct xhci_ep_ctx *ep_ctx) { struct mu3h_sch_ep_info *sch_ep; struct mu3h_sch_bw_info *bw_info; struct mu3h_sch_tt *tt = NULL; + u32 len; bw_info = get_bw_info(mtk, udev, ep); if (!bw_info) return ERR_PTR(-ENODEV); - sch_ep = kzalloc(sizeof(*sch_ep), GFP_KERNEL); + if (is_fs_or_ls(udev->speed)) + len = TT_MICROFRAMES_MAX; + else if ((udev->speed >= USB_SPEED_SUPER) && + usb_endpoint_xfer_isoc(&ep->desc)) + len = get_esit(ep_ctx); + else + len = 1; + + sch_ep = kzalloc(struct_size(sch_ep, bw_budget_table, len), GFP_KERNEL); if (!sch_ep) return ERR_PTR(-ENOMEM); @@ -279,7 +300,11 @@ static void setup_sch_info(struct xhci_ep_ctx *ep_ctx, u32 mult; u32 esit_pkts; u32 max_esit_payload; + u32 bw_per_microframe; + u32 *bwb_table; + int i; + bwb_table = sch_ep->bw_budget_table; ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); maxpkt = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); @@ -313,7 +338,7 @@ static void setup_sch_info(struct xhci_ep_ctx *ep_ctx, * opportunities per microframe */ sch_ep->pkts = max_burst + 1; - sch_ep->bw_cost_per_microframe = maxpkt * sch_ep->pkts; + bwb_table[0] = maxpkt * sch_ep->pkts; } else if (sch_ep->speed >= USB_SPEED_SUPER) { /* usb3_r1 spec section4.4.7 & 4.4.8 */ sch_ep->cs_count = 0; @@ -330,6 +355,7 @@ static void setup_sch_info(struct xhci_ep_ctx *ep_ctx, if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { sch_ep->pkts = esit_pkts; sch_ep->num_budget_microframes = 1; + bwb_table[0] = maxpkt * sch_ep->pkts; } if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { @@ -346,18 +372,52 @@ static void setup_sch_info(struct xhci_ep_ctx *ep_ctx, DIV_ROUND_UP(esit_pkts, sch_ep->pkts); sch_ep->repeat = !!(sch_ep->num_budget_microframes > 1); + bw_per_microframe = maxpkt * sch_ep->pkts; + + for (i = 0; i < sch_ep->num_budget_microframes - 1; i++) + bwb_table[i] = bw_per_microframe; + + /* last one <= bw_per_microframe */ + bwb_table[i] = maxpkt * esit_pkts - i * bw_per_microframe; } - sch_ep->bw_cost_per_microframe = maxpkt * sch_ep->pkts; } else if (is_fs_or_ls(sch_ep->speed)) { sch_ep->pkts = 1; /* at most one packet for each microframe */ /* - * num_budget_microframes and cs_count will be updated when + * @cs_count will be updated to add extra-cs when * check TT for INT_OUT_EP, ISOC/INT_IN_EP type + * @maxpkt <= 1023; */ sch_ep->cs_count = DIV_ROUND_UP(maxpkt, FS_PAYLOAD_MAX); sch_ep->num_budget_microframes = sch_ep->cs_count; - sch_ep->bw_cost_per_microframe = min_t(u32, maxpkt, FS_PAYLOAD_MAX); + + /* init budget table */ + if (ep_type == ISOC_OUT_EP) { + for (i = 0; i < sch_ep->cs_count - 1; i++) + bwb_table[i] = FS_PAYLOAD_MAX; + + bwb_table[i] = maxpkt - i * FS_PAYLOAD_MAX; + } else if (ep_type == INT_OUT_EP) { + /* only first one used (maxpkt <= 64), others zero */ + bwb_table[0] = maxpkt; + } else { /* INT_IN_EP or ISOC_IN_EP */ + bwb_table[0] = 0; /* start split */ + bwb_table[1] = 0; /* idle */ + /* + * @cs_count will be updated according to cs position + * (add 1 or 2 extra-cs), but assume only first + * @num_budget_microframes elements will be used later, + * although in fact it does not (extra-cs budget many receive + * some data for IN ep); + * @cs_count is 1 for INT_IN_EP (maxpkt <= 64); + */ + for (i = 0; i < sch_ep->cs_count - 1; i++) + bwb_table[i + CS_OFFSET] = FS_PAYLOAD_MAX; + + bwb_table[i + CS_OFFSET] = maxpkt - i * FS_PAYLOAD_MAX; + /* ss + idle */ + sch_ep->num_budget_microframes += CS_OFFSET; + } } } @@ -374,7 +434,7 @@ static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, for (j = 0; j < sch_ep->num_budget_microframes; j++) { k = XHCI_MTK_BW_INDEX(base + j); - bw = sch_bw->bus_bw[k] + sch_ep->bw_cost_per_microframe; + bw = sch_bw->bus_bw[k] + sch_ep->bw_budget_table[j]; if (bw > max_bw) max_bw = bw; } @@ -382,56 +442,152 @@ static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, return max_bw; } +/* + * for OUT: get first SS consumed bw; + * for IN: get first CS consumed bw; + */ +static u16 get_fs_bw(struct mu3h_sch_ep_info *sch_ep, int offset) +{ + struct mu3h_sch_tt *tt = sch_ep->sch_tt; + u16 fs_bw; + + if (sch_ep->ep_type == ISOC_OUT_EP || sch_ep->ep_type == INT_OUT_EP) + fs_bw = tt->fs_bus_bw_out[XHCI_MTK_BW_INDEX(offset)]; + else /* skip ss + idle */ + fs_bw = tt->fs_bus_bw_in[XHCI_MTK_BW_INDEX(offset + CS_OFFSET)]; + + return fs_bw; +} + static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep, bool used) { - int bw_updated; u32 base; - int i, j; - - bw_updated = sch_ep->bw_cost_per_microframe * (used ? 1 : -1); + int i, j, k; for (i = 0; i < sch_ep->num_esit; i++) { base = sch_ep->offset + i * sch_ep->esit; - for (j = 0; j < sch_ep->num_budget_microframes; j++) - sch_bw->bus_bw[XHCI_MTK_BW_INDEX(base + j)] += bw_updated; + for (j = 0; j < sch_ep->num_budget_microframes; j++) { + k = XHCI_MTK_BW_INDEX(base + j); + if (used) + sch_bw->bus_bw[k] += sch_ep->bw_budget_table[j]; + else + sch_bw->bus_bw[k] -= sch_ep->bw_budget_table[j]; + } } } -static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) +static int check_ls_budget_microframes(struct mu3h_sch_ep_info *sch_ep, int offset) +{ + struct mu3h_sch_tt *tt = sch_ep->sch_tt; + int i; + + if (sch_ep->speed != USB_SPEED_LOW) + return 0; + + if (sch_ep->ep_type == INT_OUT_EP) + i = XHCI_MTK_BW_INDEX(offset); + else if (sch_ep->ep_type == INT_IN_EP) + i = XHCI_MTK_BW_INDEX(offset + CS_OFFSET); /* skip ss + idle */ + else + return -EINVAL; + + if (tt->ls_bus_bw[i] + sch_ep->maxpkt > LS_PAYLOAD_MAX) + return -ESCH_BW_OVERFLOW; + + return 0; +} + +static int check_fs_budget_microframes(struct mu3h_sch_ep_info *sch_ep, int offset) { struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 tmp; - int base; + int i, k; + + /* + * for OUT eps, will transfer exactly assigned length of data, + * so can't allocate more than 188 bytes; + * but it's not for IN eps, usually it can't receive full + * 188 bytes in a uframe, if it not assign full 188 bytes, + * can add another one; + */ + for (i = 0; i < sch_ep->num_budget_microframes; i++) { + k = XHCI_MTK_BW_INDEX(offset + i); + if (sch_ep->ep_type == ISOC_OUT_EP || sch_ep->ep_type == INT_OUT_EP) + tmp = tt->fs_bus_bw_out[k] + sch_ep->bw_budget_table[i]; + else /* ep_type : ISOC IN / INTR IN */ + tmp = tt->fs_bus_bw_in[k]; + + if (tmp > FS_PAYLOAD_MAX) + return -ESCH_BW_OVERFLOW; + } + + return 0; +} + +static int check_fs_budget_frames(struct mu3h_sch_ep_info *sch_ep, int offset) +{ + struct mu3h_sch_tt *tt = sch_ep->sch_tt; + u32 head, tail; int i, j, k; + /* bugdet scheduled may cross at most two fs frames */ + j = XHCI_MTK_BW_INDEX(offset) / UFRAMES_PER_FRAME; + k = XHCI_MTK_BW_INDEX(offset + sch_ep->num_budget_microframes - 1) / UFRAMES_PER_FRAME; + + if (j != k) { + head = tt->fs_frame_bw[j]; + tail = tt->fs_frame_bw[k]; + } else { + head = tt->fs_frame_bw[j]; + tail = 0; + } + + j = roundup(offset, UFRAMES_PER_FRAME); + for (i = 0; i < sch_ep->num_budget_microframes; i++) { + if ((offset + i) < j) + head += sch_ep->bw_budget_table[i]; + else + tail += sch_ep->bw_budget_table[i]; + } + + if (head > FS_BW_BOUNDARY || tail > FS_BW_BOUNDARY) + return -ESCH_BW_OVERFLOW; + + return 0; +} + +static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) +{ + int i, base; + int ret = 0; + for (i = 0; i < sch_ep->num_esit; i++) { base = offset + i * sch_ep->esit; - /* - * Compared with hs bus, no matter what ep type, - * the hub will always delay one uframe to send data - */ - for (j = 0; j < sch_ep->num_budget_microframes; j++) { - k = XHCI_MTK_BW_INDEX(base + j); - tmp = tt->fs_bus_bw[k] + sch_ep->bw_cost_per_microframe; - if (tmp > FS_PAYLOAD_MAX) - return -ESCH_BW_OVERFLOW; - } + ret = check_ls_budget_microframes(sch_ep, base); + if (ret) + goto err; + + ret = check_fs_budget_microframes(sch_ep, base); + if (ret) + goto err; + + ret = check_fs_budget_frames(sch_ep, base); + if (ret) + goto err; } - return 0; +err: + return ret; } -static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset) +static int check_ss_and_cs(struct mu3h_sch_ep_info *sch_ep, u32 offset) { u32 start_ss, last_ss; u32 start_cs, last_cs; - if (!sch_ep->sch_tt) - return 0; - - start_ss = offset % 8; + start_ss = offset % UFRAMES_PER_FRAME; if (sch_ep->ep_type == ISOC_OUT_EP) { last_ss = start_ss + sch_ep->cs_count - 1; @@ -444,6 +600,7 @@ static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset) return -ESCH_SS_Y6; } else { + /* maxpkt <= 1023, cs <= 6 */ u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); /* @@ -454,44 +611,164 @@ static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset) return -ESCH_SS_Y6; /* one uframe for ss + one uframe for idle */ - start_cs = (start_ss + 2) % 8; + start_cs = (start_ss + CS_OFFSET) % UFRAMES_PER_FRAME; last_cs = start_cs + cs_count - 1; - if (last_cs > 7) return -ESCH_CS_OVERFLOW; + /* add extra-cs */ + cs_count += (last_cs == 7) ? 1 : 2; if (cs_count > 7) cs_count = 7; /* HW limit */ sch_ep->cs_count = cs_count; - /* ss, idle are ignored */ - sch_ep->num_budget_microframes = cs_count; - /* - * if interval=1, maxp >752, num_budge_micoframe is larger - * than sch_ep->esit, will overstep boundary - */ - if (sch_ep->num_budget_microframes > sch_ep->esit) - sch_ep->num_budget_microframes = sch_ep->esit; } + return 0; +} + +/* + * when isoc-out transfers 188 bytes in a uframe, and send isoc/intr's + * ss token in the uframe, may cause 'bit stuff error' in downstream + * port; + * when isoc-out transfer less than 188 bytes in a uframe, shall send + * isoc-in's ss after isoc-out's ss (but hw can't ensure the sequence, + * so just avoid overlap). + */ +static int check_isoc_ss_overlap(struct mu3h_sch_ep_info *sch_ep, u32 offset) +{ + struct mu3h_sch_tt *tt = sch_ep->sch_tt; + int base; + int i, j, k; + + if (!tt) + return 0; + + for (i = 0; i < sch_ep->num_esit; i++) { + base = offset + i * sch_ep->esit; + + if (sch_ep->ep_type == ISOC_OUT_EP) { + for (j = 0; j < sch_ep->num_budget_microframes; j++) { + k = XHCI_MTK_BW_INDEX(base + j + CS_OFFSET); + /* use cs to indicate existence of in-ss @(base+j) */ + if (tt->fs_bus_bw_in[k]) + return -ESCH_SS_OVERLAP; + } + } else if (sch_ep->ep_type == ISOC_IN_EP || sch_ep->ep_type == INT_IN_EP) { + k = XHCI_MTK_BW_INDEX(base); + /* only check IN's ss */ + if (tt->fs_bus_bw_out[k]) + return -ESCH_SS_OVERLAP; + } + } + + return 0; +} + +static int check_sch_tt_budget(struct mu3h_sch_ep_info *sch_ep, u32 offset) +{ + int ret; + + ret = check_ss_and_cs(sch_ep, offset); + if (ret) + return ret; + + ret = check_isoc_ss_overlap(sch_ep, offset); + if (ret) + return ret; + return check_fs_bus_bw(sch_ep, offset); } +/* allocate microframes in the ls/fs frame */ +static int alloc_sch_portion_of_frame(struct mu3h_sch_ep_info *sch_ep) +{ + struct mu3h_sch_bw_info *sch_bw = sch_ep->bw_info; + const u32 bw_boundary = get_bw_boundary(sch_ep->speed); + u32 bw_max, fs_bw_min; + u32 offset, offset_min; + u16 fs_bw; + int frames; + int i, j; + int ret; + + frames = sch_ep->esit / UFRAMES_PER_FRAME; + + for (i = 0; i < UFRAMES_PER_FRAME; i++) { + fs_bw_min = FS_PAYLOAD_MAX; + offset_min = XHCI_MTK_MAX_ESIT; + + for (j = 0; j < frames; j++) { + offset = (i + j * UFRAMES_PER_FRAME) % sch_ep->esit; + + ret = check_sch_tt_budget(sch_ep, offset); + if (ret) + continue; + + /* check hs bw domain */ + bw_max = get_max_bw(sch_bw, sch_ep, offset); + if (bw_max > bw_boundary) { + ret = -ESCH_BW_OVERFLOW; + continue; + } + + /* use best-fit between frames */ + fs_bw = get_fs_bw(sch_ep, offset); + if (fs_bw < fs_bw_min) { + fs_bw_min = fs_bw; + offset_min = offset; + } + + if (!fs_bw_min) + break; + } + + /* use first-fit between microframes in a frame */ + if (offset_min < XHCI_MTK_MAX_ESIT) + break; + } + + if (offset_min == XHCI_MTK_MAX_ESIT) + return -ESCH_BW_OVERFLOW; + + sch_ep->offset = offset_min; + + return 0; +} + static void update_sch_tt(struct mu3h_sch_ep_info *sch_ep, bool used) { struct mu3h_sch_tt *tt = sch_ep->sch_tt; - int bw_updated; + u16 *fs_bus_bw; u32 base; - int i, j; + int i, j, k, f; - bw_updated = sch_ep->bw_cost_per_microframe * (used ? 1 : -1); + if (sch_ep->ep_type == ISOC_OUT_EP || sch_ep->ep_type == INT_OUT_EP) + fs_bus_bw = tt->fs_bus_bw_out; + else + fs_bus_bw = tt->fs_bus_bw_in; for (i = 0; i < sch_ep->num_esit; i++) { base = sch_ep->offset + i * sch_ep->esit; - for (j = 0; j < sch_ep->num_budget_microframes; j++) - tt->fs_bus_bw[XHCI_MTK_BW_INDEX(base + j)] += bw_updated; + for (j = 0; j < sch_ep->num_budget_microframes; j++) { + k = XHCI_MTK_BW_INDEX(base + j); + f = k / UFRAMES_PER_FRAME; + if (used) { + if (sch_ep->speed == USB_SPEED_LOW) + tt->ls_bus_bw[k] += (u8)sch_ep->bw_budget_table[j]; + + fs_bus_bw[k] += (u16)sch_ep->bw_budget_table[j]; + tt->fs_frame_bw[f] += (u16)sch_ep->bw_budget_table[j]; + } else { + if (sch_ep->speed == USB_SPEED_LOW) + tt->ls_bus_bw[k] -= (u8)sch_ep->bw_budget_table[j]; + + fs_bus_bw[k] -= (u16)sch_ep->bw_budget_table[j]; + tt->fs_frame_bw[f] -= (u16)sch_ep->bw_budget_table[j]; + } + } } if (used) @@ -513,7 +790,8 @@ static int load_ep_bw(struct mu3h_sch_bw_info *sch_bw, return 0; } -static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep) +/* allocate microframes for hs/ss/ssp */ +static int alloc_sch_microframes(struct mu3h_sch_ep_info *sch_ep) { struct mu3h_sch_bw_info *sch_bw = sch_ep->bw_info; const u32 bw_boundary = get_bw_boundary(sch_ep->speed); @@ -521,16 +799,12 @@ static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep) u32 worst_bw; u32 min_bw = ~0; int min_index = -1; - int ret = 0; /* * Search through all possible schedule microframes. * and find a microframe where its worst bandwidth is minimum. */ for (offset = 0; offset < sch_ep->esit; offset++) { - ret = check_sch_tt(sch_ep, offset); - if (ret) - continue; worst_bw = get_max_bw(sch_bw, sch_ep, offset); if (worst_bw > bw_boundary) @@ -540,21 +814,29 @@ static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep) min_bw = worst_bw; min_index = offset; } - - /* use first-fit for LS/FS */ - if (sch_ep->sch_tt && min_index >= 0) - break; - - if (min_bw == 0) - break; } if (min_index < 0) - return ret ? ret : -ESCH_BW_OVERFLOW; + return -ESCH_BW_OVERFLOW; sch_ep->offset = min_index; - return load_ep_bw(sch_bw, sch_ep, true); + return 0; +} + +static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep) +{ + int ret; + + if (sch_ep->sch_tt) + ret = alloc_sch_portion_of_frame(sch_ep); + else + ret = alloc_sch_microframes(sch_ep); + + if (ret) + return ret; + + return load_ep_bw(sch_ep->bw_info, sch_ep, true); } static void destroy_sch_ep(struct xhci_hcd_mtk *mtk, struct usb_device *udev, @@ -651,7 +933,7 @@ static int add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed)); - sch_ep = create_sch_ep(mtk, udev, ep); + sch_ep = create_sch_ep(mtk, udev, ep, ep_ctx); if (IS_ERR_OR_NULL(sch_ep)) return -ENOMEM; diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index faaaf05e36ce..865b55e23b15 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -30,12 +30,21 @@ #define XHCI_MTK_MAX_ESIT (1 << 6) #define XHCI_MTK_BW_INDEX(x) ((x) & (XHCI_MTK_MAX_ESIT - 1)) +#define UFRAMES_PER_FRAME 8 +#define XHCI_MTK_FRAMES_CNT (XHCI_MTK_MAX_ESIT / UFRAMES_PER_FRAME) + /** - * @fs_bus_bw: array to keep track of bandwidth already used for FS + * @fs_bus_bw_out: save bandwidth used by FS/LS OUT eps in each uframes + * @fs_bus_bw_in: save bandwidth used by FS/LS IN eps in each uframes + * @ls_bus_bw: save bandwidth used by LS eps in each uframes + * @fs_frame_bw: save bandwidth used by FS/LS eps in each FS frames * @ep_list: Endpoints using this TT */ struct mu3h_sch_tt { - u32 fs_bus_bw[XHCI_MTK_MAX_ESIT]; + u16 fs_bus_bw_out[XHCI_MTK_MAX_ESIT]; + u16 fs_bus_bw_in[XHCI_MTK_MAX_ESIT]; + u8 ls_bus_bw[XHCI_MTK_MAX_ESIT]; + u16 fs_frame_bw[XHCI_MTK_FRAMES_CNT]; struct list_head ep_list; }; @@ -58,7 +67,6 @@ struct mu3h_sch_bw_info { * @num_esit: number of @esit in a period * @num_budget_microframes: number of continuous uframes * (@repeat==1) scheduled within the interval - * @bw_cost_per_microframe: bandwidth cost per microframe * @hentry: hash table entry * @endpoint: linked into bandwidth domain which it belongs to * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to @@ -83,12 +91,12 @@ struct mu3h_sch_bw_info { * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets * according to @pkts and @repeat. normal mode is used by * default + * @bw_budget_table: table to record bandwidth budget per microframe */ struct mu3h_sch_ep_info { u32 esit; u32 num_esit; u32 num_budget_microframes; - u32 bw_cost_per_microframe; struct list_head endpoint; struct hlist_node hentry; struct list_head tt_endpoint; @@ -108,6 +116,7 @@ struct mu3h_sch_ep_info { u32 pkts; u32 cs_count; u32 burst_mode; + u32 bw_budget_table[]; }; #define MU3C_U3_PORT_MAX 4 diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index b9ae5c2a2527..95ed9404f6f8 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -535,6 +535,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* xHC spec requires PCI devices to support D3hot and D3cold */ if (xhci->hci_version >= 0x120) xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; + else if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version >= 0x110) + xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, @@ -693,7 +695,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ pm_runtime_put_noidle(&dev->dev); - if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) + if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0) + pm_runtime_forbid(&dev->dev); + else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) pm_runtime_allow(&dev->dev); dma_set_max_seg_size(&dev->dev, UINT_MAX); diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 28218c8f1837..b93161374293 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -458,23 +458,38 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) int ret; if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) { - clk_prepare_enable(xhci->clk); - clk_prepare_enable(xhci->reg_clk); + ret = clk_prepare_enable(xhci->clk); + if (ret) + return ret; + + ret = clk_prepare_enable(xhci->reg_clk); + if (ret) { + clk_disable_unprepare(xhci->clk); + return ret; + } } ret = xhci_priv_resume_quirk(hcd); if (ret) - return ret; + goto disable_clks; ret = xhci_resume(xhci, PMSG_RESUME); if (ret) - return ret; + goto disable_clks; pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); return 0; + +disable_clks: + if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) { + clk_disable_unprepare(xhci->clk); + clk_disable_unprepare(xhci->reg_clk); + } + + return ret; } static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3e5dc0723a8f..f3b5e6345858 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -144,7 +144,7 @@ static void next_trb(struct xhci_hcd *xhci, struct xhci_segment **seg, union xhci_trb **trb) { - if (trb_is_link(*trb)) { + if (trb_is_link(*trb) || last_trb_on_seg(*seg, *trb)) { *seg = (*seg)->next; *trb = ((*seg)->trbs); } else { @@ -450,8 +450,9 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) * In the future we should distinguish between -ENODEV and -ETIMEDOUT * and try to recover a -ETIMEDOUT with a host controller reset. */ - ret = xhci_handshake(&xhci->op_regs->cmd_ring, - CMD_RING_RUNNING, 0, 5 * 1000 * 1000); + ret = xhci_handshake_check_state(xhci, &xhci->op_regs->cmd_ring, + CMD_RING_RUNNING, 0, 5 * 1000 * 1000, + XHCI_STATE_REMOVING); if (ret < 0) { xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret); xhci_halt(xhci); @@ -1879,7 +1880,6 @@ static void handle_port_status(struct xhci_hcd *xhci, if ((port_id <= 0) || (port_id > max_ports)) { xhci_warn(xhci, "Port change event with invalid port ID %d\n", port_id); - inc_deq(xhci, ir->event_ring); return; } @@ -1906,7 +1906,7 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n", hcd->self.busnum, hcd_portnum + 1, port_id, portsc); - trace_xhci_handle_port_status(hcd_portnum, portsc); + trace_xhci_handle_port_status(port, portsc); if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); @@ -2007,8 +2007,6 @@ static void handle_port_status(struct xhci_hcd *xhci, } cleanup: - /* Update event ring dequeue pointer before dropping the lock */ - inc_deq(xhci, ir->event_ring); /* Don't make the USB core poll the roothub if we got a bad port status * change event. Besides, at that point we can't tell which roothub @@ -2884,13 +2882,6 @@ cleanup: trb_comp_code != COMP_MISSED_SERVICE_ERROR && trb_comp_code != COMP_NO_PING_RESPONSE_ERROR; - /* - * Do not update event ring dequeue pointer if we're in a loop - * processing missed tds. - */ - if (!handling_skipped_tds) - inc_deq(xhci, ir->event_ring); - /* * If ep->skip is set, it means there are missed tds on the * endpoint ring need to take care of. @@ -2922,9 +2913,7 @@ err_out: static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) { union xhci_trb *event; - int update_ptrs = 1; u32 trb_type; - int ret; /* Event ring hasn't been allocated yet. */ if (!ir || !ir->event_ring || !ir->event_ring->dequeue) { @@ -2954,12 +2943,9 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) break; case TRB_PORT_STATUS: handle_port_status(xhci, ir, event); - update_ptrs = 0; break; case TRB_TRANSFER: - ret = handle_tx_event(xhci, ir, &event->trans_event); - if (ret >= 0) - update_ptrs = 0; + handle_tx_event(xhci, ir, &event->trans_event); break; case TRB_DEV_NOTE: handle_device_notification(xhci, event); @@ -2979,9 +2965,8 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) return 0; } - if (update_ptrs) - /* Update SW event ring dequeue pointer */ - inc_deq(xhci, ir->event_ring); + /* Update SW event ring dequeue pointer */ + inc_deq(xhci, ir->event_ring); /* Are there more items on the event ring? Caller will call us again to * check. @@ -3013,13 +2998,12 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, * Per 4.9.4, Software writes to the ERDP register shall * always advance the Event Ring Dequeue Pointer value. */ - if ((temp_64 & (u64) ~ERST_PTR_MASK) == - ((u64) deq & (u64) ~ERST_PTR_MASK)) + if ((temp_64 & ERST_PTR_MASK) == (deq & ERST_PTR_MASK)) return; /* Update HC event ring dequeue pointer */ - temp_64 &= ERST_DESI_MASK; - temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); + temp_64 = ir->event_ring->deq_seg->num & ERST_DESI_MASK; + temp_64 |= deq & ERST_PTR_MASK; } /* Clear the event handler busy flag (RW1C) */ diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index d6b32f2ad90e..ac47b1c0544a 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -509,35 +509,38 @@ DEFINE_EVENT(xhci_log_ring, xhci_inc_deq, ); DECLARE_EVENT_CLASS(xhci_log_portsc, - TP_PROTO(u32 portnum, u32 portsc), - TP_ARGS(portnum, portsc), + TP_PROTO(struct xhci_port *port, u32 portsc), + TP_ARGS(port, portsc), TP_STRUCT__entry( + __field(u32, busnum) __field(u32, portnum) __field(u32, portsc) ), TP_fast_assign( - __entry->portnum = portnum; + __entry->busnum = port->rhub->hcd->self.busnum; + __entry->portnum = port->hcd_portnum; __entry->portsc = portsc; ), - TP_printk("port-%d: %s", + TP_printk("port %d-%d: %s", + __entry->busnum, __entry->portnum, xhci_decode_portsc(__get_buf(XHCI_MSG_MAX), __entry->portsc) ) ); DEFINE_EVENT(xhci_log_portsc, xhci_handle_port_status, - TP_PROTO(u32 portnum, u32 portsc), - TP_ARGS(portnum, portsc) + TP_PROTO(struct xhci_port *port, u32 portsc), + TP_ARGS(port, portsc) ); DEFINE_EVENT(xhci_log_portsc, xhci_get_port_status, - TP_PROTO(u32 portnum, u32 portsc), - TP_ARGS(portnum, portsc) + TP_PROTO(struct xhci_port *port, u32 portsc), + TP_ARGS(port, portsc) ); DEFINE_EVENT(xhci_log_portsc, xhci_hub_status_data, - TP_PROTO(u32 portnum, u32 portsc), - TP_ARGS(portnum, portsc) + TP_PROTO(struct xhci_port *port, u32 portsc), + TP_ARGS(port, portsc) ); DECLARE_EVENT_CLASS(xhci_log_doorbell, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index e1b1b64a0723..884b0898d9c9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -82,6 +82,29 @@ int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us) } /* + * xhci_handshake_check_state - same as xhci_handshake but takes an additional + * exit_state parameter, and bails out with an error immediately when xhc_state + * has exit_state flag set. + */ +int xhci_handshake_check_state(struct xhci_hcd *xhci, void __iomem *ptr, + u32 mask, u32 done, int usec, unsigned int exit_state) +{ + u32 result; + int ret; + + ret = readl_poll_timeout_atomic(ptr, result, + (result & mask) == done || + result == U32_MAX || + xhci->xhc_state & exit_state, + 1, usec); + + if (result == U32_MAX || xhci->xhc_state & exit_state) + return -ENODEV; + + return ret; +} + +/* * Disable interrupts and begin the xHCI halting process. */ void xhci_quiesce(struct xhci_hcd *xhci) @@ -201,7 +224,8 @@ int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us) if (xhci->quirks & XHCI_INTEL_HOST) udelay(1000); - ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us); + ret = xhci_handshake_check_state(xhci, &xhci->op_regs->command, + CMD_RESET, 0, timeout_us, XHCI_STATE_REMOVING); if (ret) return ret; @@ -520,7 +544,7 @@ int xhci_run(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_run"); temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); - temp_64 &= ~ERST_PTR_MASK; + temp_64 &= ERST_PTR_MASK; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "ERST deq = 64'h%0lx", (long unsigned int) temp_64); @@ -968,6 +992,7 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg) int retval = 0; bool comp_timer_running = false; bool pending_portevent = false; + bool suspended_usb3_devs = false; bool reinit_xhc = false; if (!hcd->state) @@ -1115,10 +1140,17 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg) /* * Resume roothubs only if there are pending events. * USB 3 devices resend U3 LFPS wake after a 100ms delay if - * the first wake signalling failed, give it that chance. + * the first wake signalling failed, give it that chance if + * there are suspended USB 3 devices. */ + if (xhci->usb3_rhub.bus_state.suspended_ports || + xhci->usb3_rhub.bus_state.bus_suspended) + suspended_usb3_devs = true; + pending_portevent = xhci_pending_portevent(xhci); - if (!pending_portevent && msg.event == PM_EVENT_AUTO_RESUME) { + + if (suspended_usb3_devs && !pending_portevent && + msg.event == PM_EVENT_AUTO_RESUME) { msleep(120); pending_portevent = xhci_pending_portevent(xhci); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3d0451f5880a..3ea5c092bba7 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -525,7 +525,7 @@ struct xhci_intr_reg { * a work queue (or delayed service routine)? */ #define ERST_EHB (1 << 3) -#define ERST_PTR_MASK (0xf) +#define ERST_PTR_MASK (GENMASK_ULL(63, 4)) /** * struct xhci_run_regs @@ -558,33 +558,6 @@ struct xhci_doorbell_array { #define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) #define DB_VALUE_HOST 0x00000000 -/** - * struct xhci_protocol_caps - * @revision: major revision, minor revision, capability ID, - * and next capability pointer. - * @name_string: Four ASCII characters to say which spec this xHC - * follows, typically "USB ". - * @port_info: Port offset, count, and protocol-defined information. - */ -struct xhci_protocol_caps { - u32 revision; - u32 name_string; - u32 port_info; -}; - -#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) -#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) -#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f) -#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) -#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) - -#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f) -#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03) -#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03) -#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01) -#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03) -#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff) - #define PLT_MASK (0x03 << 6) #define PLT_SYM (0x00 << 6) #define PLT_ASYM_RX (0x02 << 6) @@ -1545,6 +1518,7 @@ struct xhci_segment { union xhci_trb *trbs; /* private to HCD */ struct xhci_segment *next; + unsigned int num; dma_addr_t dma; /* Max packet sized bounce buffer for td-fragmant alignment */ dma_addr_t bounce_dma; @@ -1669,12 +1643,8 @@ struct urb_priv { struct xhci_td td[] __counted_by(num_tds); }; -/* - * Each segment table entry is 4*32bits long. 1K seems like an ok size: - * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, - * meaning 64 ring segments. - * Initial allocated size of the ERST, in number of entries */ -#define ERST_NUM_SEGS 1 +/* Reasonable limit for number of Event Ring segments (spec allows 32k) */ +#define ERST_MAX_SEGS 2 /* Poll every 60 seconds */ #define POLL_TIMEOUT 60 /* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */ @@ -2078,13 +2048,8 @@ struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring); int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, unsigned int num_trbs, gfp_t flags); -int xhci_alloc_erst(struct xhci_hcd *xhci, - struct xhci_ring *evt_ring, - struct xhci_erst *erst, - gfp_t flags); void xhci_initialize_ring_info(struct xhci_ring *ring, unsigned int cycle_state); -void xhci_free_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); void xhci_free_endpoint_ring(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, unsigned int ep_index); @@ -2119,6 +2084,8 @@ void xhci_free_container_ctx(struct xhci_hcd *xhci, /* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us); +int xhci_handshake_check_state(struct xhci_hcd *xhci, void __iomem *ptr, + u32 mask, u32 done, int usec, unsigned int exit_state); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); int xhci_start(struct xhci_hcd *xhci); diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 99b15b77dfd5..c510af7baa0d 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -165,6 +165,19 @@ config APPLE_MFI_FASTCHARGE It is safe to say M here. +config USB_LJCA + tristate "Intel La Jolla Cove Adapter support" + select AUXILIARY_BUS + depends on USB && ACPI + help + This adds support for Intel La Jolla Cove USB-I2C/SPI/GPIO + Master Adapter (LJCA). Additional drivers such as I2C_LJCA, + GPIO_LJCA and SPI_LJCA must be enabled in order to use the + functionality of the device. + + This driver can also be built as a module. If so, the module + will be called usb-ljca. + source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 1992cc284d8a..0bc732bcb162 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o obj-$(CONFIG_USB_EZUSB_FX2) += ezusb.o obj-$(CONFIG_APPLE_MFI_FASTCHARGE) += apple-mfi-fastcharge.o +obj-$(CONFIG_USB_LJCA) += usb-ljca.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index 57bbe1309094..a341b2fbb7b4 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -240,7 +240,6 @@ static void onboard_hub_attach_usb_driver(struct work_struct *work) static int onboard_hub_probe(struct platform_device *pdev) { - const struct of_device_id *of_id; struct device *dev = &pdev->dev; struct onboard_hub *hub; unsigned int i; @@ -250,11 +249,7 @@ static int onboard_hub_probe(struct platform_device *pdev) if (!hub) return -ENOMEM; - of_id = of_match_device(onboard_hub_match, &pdev->dev); - if (!of_id) - return -ENODEV; - - hub->pdata = of_id->data; + hub->pdata = device_get_match_data(&pdev->dev); if (!hub->pdata) return -EINVAL; diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index 2a4ab5ac0ebe..c4e24a7b9290 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -57,6 +57,7 @@ static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb5e3,608", .data = &genesys_gl850g_data, }, { .compatible = "usb5e3,610", .data = &genesys_gl852g_data, }, { .compatible = "usb5e3,620", .data = &genesys_gl852g_data, }, + { .compatible = "usb5e3,626", .data = &genesys_gl852g_data, }, { .compatible = "usbbda,411", .data = &realtek_rts5411_data, }, { .compatible = "usbbda,5411", .data = &realtek_rts5411_data, }, { .compatible = "usbbda,414", .data = &realtek_rts5411_data, }, diff --git a/drivers/usb/misc/usb-ljca.c b/drivers/usb/misc/usb-ljca.c new file mode 100644 index 000000000000..c9decd0396d4 --- /dev/null +++ b/drivers/usb/misc/usb-ljca.c @@ -0,0 +1,902 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel La Jolla Cove Adapter USB driver + * + * Copyright (c) 2023, Intel Corporation. + */ + +#include <linux/acpi.h> +#include <linux/auxiliary_bus.h> +#include <linux/dev_printk.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/usb.h> +#include <linux/usb/ljca.h> + +#include <asm/unaligned.h> + +/* command flags */ +#define LJCA_ACK_FLAG BIT(0) +#define LJCA_RESP_FLAG BIT(1) +#define LJCA_CMPL_FLAG BIT(2) + +#define LJCA_MAX_PACKET_SIZE 64u +#define LJCA_MAX_PAYLOAD_SIZE \ + (LJCA_MAX_PACKET_SIZE - sizeof(struct ljca_msg)) + +#define LJCA_WRITE_TIMEOUT_MS 200 +#define LJCA_WRITE_ACK_TIMEOUT_MS 500 +#define LJCA_ENUM_CLIENT_TIMEOUT_MS 20 + +/* ljca client type */ +enum ljca_client_type { + LJCA_CLIENT_MNG = 1, + LJCA_CLIENT_GPIO = 3, + LJCA_CLIENT_I2C = 4, + LJCA_CLIENT_SPI = 5, +}; + +/* MNG client commands */ +enum ljca_mng_cmd { + LJCA_MNG_RESET = 2, + LJCA_MNG_ENUM_GPIO = 4, + LJCA_MNG_ENUM_I2C = 5, + LJCA_MNG_ENUM_SPI = 8, +}; + +/* ljca client acpi _ADR */ +enum ljca_client_acpi_adr { + LJCA_GPIO_ACPI_ADR, + LJCA_I2C1_ACPI_ADR, + LJCA_I2C2_ACPI_ADR, + LJCA_SPI1_ACPI_ADR, + LJCA_SPI2_ACPI_ADR, + LJCA_CLIENT_ACPI_ADR_MAX, +}; + +/* ljca cmd message structure */ +struct ljca_msg { + u8 type; + u8 cmd; + u8 flags; + u8 len; + u8 data[] __counted_by(len); +} __packed; + +struct ljca_i2c_ctr_info { + u8 id; + u8 capacity; + u8 intr_pin; +} __packed; + +struct ljca_i2c_descriptor { + u8 num; + struct ljca_i2c_ctr_info info[] __counted_by(num); +} __packed; + +struct ljca_spi_ctr_info { + u8 id; + u8 capacity; + u8 intr_pin; +} __packed; + +struct ljca_spi_descriptor { + u8 num; + struct ljca_spi_ctr_info info[] __counted_by(num); +} __packed; + +struct ljca_bank_descriptor { + u8 bank_id; + u8 pin_num; + + /* 1 bit for each gpio, 1 means valid */ + __le32 valid_pins; +} __packed; + +struct ljca_gpio_descriptor { + u8 pins_per_bank; + u8 bank_num; + struct ljca_bank_descriptor bank_desc[] __counted_by(bank_num); +} __packed; + +/** + * struct ljca_adapter - represent a ljca adapter + * + * @intf: the usb interface for this ljca adapter + * @usb_dev: the usb device for this ljca adapter + * @dev: the specific device info of the usb interface + * @rx_pipe: bulk in pipe for receive data from firmware + * @tx_pipe: bulk out pipe for send data to firmware + * @rx_urb: urb used for the bulk in pipe + * @rx_buf: buffer used to receive command response and event + * @rx_len: length of rx buffer + * @ex_buf: external buffer to save command response + * @ex_buf_len: length of external buffer + * @actual_length: actual length of data copied to external buffer + * @tx_buf: buffer used to download command to firmware + * @tx_buf_len: length of tx buffer + * @lock: spinlock to protect tx_buf and ex_buf + * @cmd_completion: completion object as the command receives ack + * @mutex: mutex to avoid command download concurrently + * @client_list: client device list + * @disconnect: usb disconnect ongoing or not + * @reset_id: used to reset firmware + */ +struct ljca_adapter { + struct usb_interface *intf; + struct usb_device *usb_dev; + struct device *dev; + + unsigned int rx_pipe; + unsigned int tx_pipe; + + struct urb *rx_urb; + void *rx_buf; + unsigned int rx_len; + + u8 *ex_buf; + u8 ex_buf_len; + u8 actual_length; + + void *tx_buf; + u8 tx_buf_len; + + spinlock_t lock; + + struct completion cmd_completion; + struct mutex mutex; + + struct list_head client_list; + + bool disconnect; + + u32 reset_id; +}; + +struct ljca_match_ids_walk_data { + const struct acpi_device_id *ids; + const char *uid; + struct acpi_device *adev; +}; + +static const struct acpi_device_id ljca_gpio_hids[] = { + { "INTC1074" }, + { "INTC1096" }, + { "INTC100B" }, + { "INTC10D1" }, + {}, +}; + +static const struct acpi_device_id ljca_i2c_hids[] = { + { "INTC1075" }, + { "INTC1097" }, + { "INTC100C" }, + { "INTC10D2" }, + {}, +}; + +static const struct acpi_device_id ljca_spi_hids[] = { + { "INTC1091" }, + { "INTC1098" }, + { "INTC100D" }, + { "INTC10D3" }, + {}, +}; + +static void ljca_handle_event(struct ljca_adapter *adap, + struct ljca_msg *header) +{ + struct ljca_client *client; + + list_for_each_entry(client, &adap->client_list, link) { + /* + * Currently only GPIO register event callback, but + * firmware message structure should include id when + * multiple same type clients register event callback. + */ + if (client->type == header->type) { + unsigned long flags; + + spin_lock_irqsave(&client->event_cb_lock, flags); + client->event_cb(client->context, header->cmd, + header->data, header->len); + spin_unlock_irqrestore(&client->event_cb_lock, flags); + + break; + } + } +} + +/* process command ack and received data if available */ +static void ljca_handle_cmd_ack(struct ljca_adapter *adap, struct ljca_msg *header) +{ + struct ljca_msg *tx_header = adap->tx_buf; + u8 ibuf_len, actual_len = 0; + unsigned long flags; + u8 *ibuf; + + spin_lock_irqsave(&adap->lock, flags); + + if (tx_header->type != header->type || tx_header->cmd != header->cmd) { + spin_unlock_irqrestore(&adap->lock, flags); + dev_err(adap->dev, "cmd ack mismatch error\n"); + return; + } + + ibuf_len = adap->ex_buf_len; + ibuf = adap->ex_buf; + + if (ibuf && ibuf_len) { + actual_len = min(header->len, ibuf_len); + + /* copy received data to external buffer */ + memcpy(ibuf, header->data, actual_len); + } + /* update copied data length */ + adap->actual_length = actual_len; + + spin_unlock_irqrestore(&adap->lock, flags); + + complete(&adap->cmd_completion); +} + +static void ljca_recv(struct urb *urb) +{ + struct ljca_msg *header = urb->transfer_buffer; + struct ljca_adapter *adap = urb->context; + int ret; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ENOENT: + /* + * directly complete the possible ongoing transfer + * during disconnect + */ + if (adap->disconnect) + complete(&adap->cmd_completion); + return; + case -ECONNRESET: + case -ESHUTDOWN: + case -EPIPE: + /* rx urb is terminated */ + dev_dbg(adap->dev, "rx urb terminated with status: %d\n", + urb->status); + return; + default: + dev_dbg(adap->dev, "rx urb error: %d\n", urb->status); + goto resubmit; + } + + if (header->len + sizeof(*header) != urb->actual_length) + goto resubmit; + + if (header->flags & LJCA_ACK_FLAG) + ljca_handle_cmd_ack(adap, header); + else + ljca_handle_event(adap, header); + +resubmit: + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret && ret != -EPERM) + dev_err(adap->dev, "resubmit rx urb error %d\n", ret); +} + +static int ljca_send(struct ljca_adapter *adap, u8 type, u8 cmd, + const u8 *obuf, u8 obuf_len, u8 *ibuf, u8 ibuf_len, + bool ack, unsigned long timeout) +{ + unsigned int msg_len = sizeof(struct ljca_msg) + obuf_len; + struct ljca_msg *header = adap->tx_buf; + unsigned int transferred; + unsigned long flags; + int ret; + + if (adap->disconnect) + return -ENODEV; + + if (msg_len > adap->tx_buf_len) + return -EINVAL; + + mutex_lock(&adap->mutex); + + spin_lock_irqsave(&adap->lock, flags); + + header->type = type; + header->cmd = cmd; + header->len = obuf_len; + if (obuf) + memcpy(header->data, obuf, obuf_len); + + header->flags = LJCA_CMPL_FLAG | (ack ? LJCA_ACK_FLAG : 0); + + adap->ex_buf = ibuf; + adap->ex_buf_len = ibuf_len; + adap->actual_length = 0; + + spin_unlock_irqrestore(&adap->lock, flags); + + reinit_completion(&adap->cmd_completion); + + ret = usb_autopm_get_interface(adap->intf); + if (ret < 0) + goto out; + + ret = usb_bulk_msg(adap->usb_dev, adap->tx_pipe, header, + msg_len, &transferred, LJCA_WRITE_TIMEOUT_MS); + + usb_autopm_put_interface(adap->intf); + + if (ret < 0) + goto out; + if (transferred != msg_len) { + ret = -EIO; + goto out; + } + + if (ack) { + ret = wait_for_completion_timeout(&adap->cmd_completion, + timeout); + if (!ret) { + ret = -ETIMEDOUT; + goto out; + } + } + ret = adap->actual_length; + +out: + spin_lock_irqsave(&adap->lock, flags); + adap->ex_buf = NULL; + adap->ex_buf_len = 0; + + memset(header, 0, sizeof(*header)); + spin_unlock_irqrestore(&adap->lock, flags); + + mutex_unlock(&adap->mutex); + + return ret; +} + +int ljca_transfer(struct ljca_client *client, u8 cmd, const u8 *obuf, + u8 obuf_len, u8 *ibuf, u8 ibuf_len) +{ + return ljca_send(client->adapter, client->type, cmd, + obuf, obuf_len, ibuf, ibuf_len, true, + LJCA_WRITE_ACK_TIMEOUT_MS); +} +EXPORT_SYMBOL_NS_GPL(ljca_transfer, LJCA); + +int ljca_transfer_noack(struct ljca_client *client, u8 cmd, const u8 *obuf, + u8 obuf_len) +{ + return ljca_send(client->adapter, client->type, cmd, obuf, + obuf_len, NULL, 0, false, LJCA_WRITE_ACK_TIMEOUT_MS); +} +EXPORT_SYMBOL_NS_GPL(ljca_transfer_noack, LJCA); + +int ljca_register_event_cb(struct ljca_client *client, ljca_event_cb_t event_cb, + void *context) +{ + unsigned long flags; + + if (!event_cb) + return -EINVAL; + + spin_lock_irqsave(&client->event_cb_lock, flags); + + if (client->event_cb) { + spin_unlock_irqrestore(&client->event_cb_lock, flags); + return -EALREADY; + } + + client->event_cb = event_cb; + client->context = context; + + spin_unlock_irqrestore(&client->event_cb_lock, flags); + + return 0; +} +EXPORT_SYMBOL_NS_GPL(ljca_register_event_cb, LJCA); + +void ljca_unregister_event_cb(struct ljca_client *client) +{ + unsigned long flags; + + spin_lock_irqsave(&client->event_cb_lock, flags); + + client->event_cb = NULL; + client->context = NULL; + + spin_unlock_irqrestore(&client->event_cb_lock, flags); +} +EXPORT_SYMBOL_NS_GPL(ljca_unregister_event_cb, LJCA); + +static int ljca_match_device_ids(struct acpi_device *adev, void *data) +{ + struct ljca_match_ids_walk_data *wd = data; + const char *uid = acpi_device_uid(adev); + + if (acpi_match_device_ids(adev, wd->ids)) + return 0; + + if (!wd->uid) + goto match; + + if (!uid) + /* + * Some DSDTs have only one ACPI companion for the two I2C + * controllers and they don't set a UID at all (e.g. Dell + * Latitude 9420). On these platforms only the first I2C + * controller is used, so if a HID match has no UID we use + * "0" as the UID and assign ACPI companion to the first + * I2C controller. + */ + uid = "0"; + else + uid = strchr(uid, wd->uid[0]); + + if (!uid || strcmp(uid, wd->uid)) + return 0; + +match: + wd->adev = adev; + + return 1; +} + +/* bind auxiliary device to acpi device */ +static void ljca_auxdev_acpi_bind(struct ljca_adapter *adap, + struct auxiliary_device *auxdev, + u64 adr, u8 id) +{ + struct ljca_match_ids_walk_data wd = { 0 }; + struct acpi_device *parent, *adev; + struct device *dev = adap->dev; + char uid[4]; + + parent = ACPI_COMPANION(dev); + if (!parent) + return; + + /* + * get auxdev ACPI handle from the ACPI device directly + * under the parent that matches _ADR. + */ + adev = acpi_find_child_device(parent, adr, false); + if (adev) { + ACPI_COMPANION_SET(&auxdev->dev, adev); + return; + } + + /* + * _ADR is a grey area in the ACPI specification, some + * platforms use _HID to distinguish children devices. + */ + switch (adr) { + case LJCA_GPIO_ACPI_ADR: + wd.ids = ljca_gpio_hids; + break; + case LJCA_I2C1_ACPI_ADR: + case LJCA_I2C2_ACPI_ADR: + snprintf(uid, sizeof(uid), "%d", id); + wd.uid = uid; + wd.ids = ljca_i2c_hids; + break; + case LJCA_SPI1_ACPI_ADR: + case LJCA_SPI2_ACPI_ADR: + wd.ids = ljca_spi_hids; + break; + default: + dev_warn(dev, "unsupported _ADR\n"); + return; + } + + acpi_dev_for_each_child(parent, ljca_match_device_ids, &wd); + if (wd.adev) { + ACPI_COMPANION_SET(&auxdev->dev, wd.adev); + return; + } + + parent = ACPI_COMPANION(dev->parent->parent); + if (!parent) + return; + + acpi_dev_for_each_child(parent, ljca_match_device_ids, &wd); + if (wd.adev) + ACPI_COMPANION_SET(&auxdev->dev, wd.adev); +} + +static void ljca_auxdev_release(struct device *dev) +{ + struct auxiliary_device *auxdev = to_auxiliary_dev(dev); + + kfree(auxdev->dev.platform_data); +} + +static int ljca_new_client_device(struct ljca_adapter *adap, u8 type, u8 id, + char *name, void *data, u64 adr) +{ + struct auxiliary_device *auxdev; + struct ljca_client *client; + int ret; + + client = kzalloc(sizeof *client, GFP_KERNEL); + if (!client) + return -ENOMEM; + + client->type = type; + client->id = id; + client->adapter = adap; + spin_lock_init(&client->event_cb_lock); + + auxdev = &client->auxdev; + auxdev->name = name; + auxdev->id = id; + + auxdev->dev.parent = adap->dev; + auxdev->dev.platform_data = data; + auxdev->dev.release = ljca_auxdev_release; + + ret = auxiliary_device_init(auxdev); + if (ret) + goto err_free; + + ljca_auxdev_acpi_bind(adap, auxdev, adr, id); + + ret = auxiliary_device_add(auxdev); + if (ret) + goto err_uninit; + + list_add_tail(&client->link, &adap->client_list); + + return 0; + +err_uninit: + auxiliary_device_uninit(auxdev); + +err_free: + kfree(client); + + return ret; +} + +static int ljca_enumerate_gpio(struct ljca_adapter *adap) +{ + u32 valid_pin[LJCA_MAX_GPIO_NUM / BITS_PER_TYPE(u32)]; + struct ljca_gpio_descriptor *desc; + struct ljca_gpio_info *gpio_info; + u8 buf[LJCA_MAX_PAYLOAD_SIZE]; + int ret, gpio_num; + unsigned int i; + + ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_GPIO, NULL, 0, buf, + sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); + if (ret < 0) + return ret; + + /* check firmware response */ + desc = (struct ljca_gpio_descriptor *)buf; + if (ret != struct_size(desc, bank_desc, desc->bank_num)) + return -EINVAL; + + gpio_num = desc->pins_per_bank * desc->bank_num; + if (gpio_num > LJCA_MAX_GPIO_NUM) + return -EINVAL; + + /* construct platform data */ + gpio_info = kzalloc(sizeof *gpio_info, GFP_KERNEL); + if (!gpio_info) + return -ENOMEM; + gpio_info->num = gpio_num; + + for (i = 0; i < desc->bank_num; i++) + valid_pin[i] = get_unaligned_le32(&desc->bank_desc[i].valid_pins); + bitmap_from_arr32(gpio_info->valid_pin_map, valid_pin, gpio_num); + + ret = ljca_new_client_device(adap, LJCA_CLIENT_GPIO, 0, "ljca-gpio", + gpio_info, LJCA_GPIO_ACPI_ADR); + if (ret) + kfree(gpio_info); + + return ret; +} + +static int ljca_enumerate_i2c(struct ljca_adapter *adap) +{ + struct ljca_i2c_descriptor *desc; + struct ljca_i2c_info *i2c_info; + u8 buf[LJCA_MAX_PAYLOAD_SIZE]; + unsigned int i; + int ret; + + ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_I2C, NULL, 0, buf, + sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); + if (ret < 0) + return ret; + + /* check firmware response */ + desc = (struct ljca_i2c_descriptor *)buf; + if (ret != struct_size(desc, info, desc->num)) + return -EINVAL; + + for (i = 0; i < desc->num; i++) { + /* construct platform data */ + i2c_info = kzalloc(sizeof *i2c_info, GFP_KERNEL); + if (!i2c_info) + return -ENOMEM; + + i2c_info->id = desc->info[i].id; + i2c_info->capacity = desc->info[i].capacity; + i2c_info->intr_pin = desc->info[i].intr_pin; + + ret = ljca_new_client_device(adap, LJCA_CLIENT_I2C, i, + "ljca-i2c", i2c_info, + LJCA_I2C1_ACPI_ADR + i); + if (ret) { + kfree(i2c_info); + return ret; + } + } + + return 0; +} + +static int ljca_enumerate_spi(struct ljca_adapter *adap) +{ + struct ljca_spi_descriptor *desc; + struct ljca_spi_info *spi_info; + u8 buf[LJCA_MAX_PAYLOAD_SIZE]; + unsigned int i; + int ret; + + ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_ENUM_SPI, NULL, 0, buf, + sizeof(buf), true, LJCA_ENUM_CLIENT_TIMEOUT_MS); + if (ret < 0) + return ret; + + /* check firmware response */ + desc = (struct ljca_spi_descriptor *)buf; + if (ret != struct_size(desc, info, desc->num)) + return -EINVAL; + + for (i = 0; i < desc->num; i++) { + /* construct platform data */ + spi_info = kzalloc(sizeof *spi_info, GFP_KERNEL); + if (!spi_info) + return -ENOMEM; + + spi_info->id = desc->info[i].id; + spi_info->capacity = desc->info[i].capacity; + + ret = ljca_new_client_device(adap, LJCA_CLIENT_SPI, i, + "ljca-spi", spi_info, + LJCA_SPI1_ACPI_ADR + i); + if (ret) { + kfree(spi_info); + return ret; + } + } + + return 0; +} + +static int ljca_reset_handshake(struct ljca_adapter *adap) +{ + __le32 reset_id = cpu_to_le32(adap->reset_id); + __le32 reset_id_ret = 0; + int ret; + + adap->reset_id++; + + ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_RESET, (u8 *)&reset_id, + sizeof(__le32), (u8 *)&reset_id_ret, sizeof(__le32), + true, LJCA_WRITE_ACK_TIMEOUT_MS); + if (ret < 0) + return ret; + + if (reset_id_ret != reset_id) + return -EINVAL; + + return 0; +} + +static int ljca_enumerate_clients(struct ljca_adapter *adap) +{ + struct ljca_client *client, *next; + int ret; + + ret = ljca_reset_handshake(adap); + if (ret) + goto err_kill; + + ret = ljca_enumerate_gpio(adap); + if (ret) { + dev_err(adap->dev, "enumerate GPIO error\n"); + goto err_kill; + } + + ret = ljca_enumerate_i2c(adap); + if (ret) { + dev_err(adap->dev, "enumerate I2C error\n"); + goto err_kill; + } + + ret = ljca_enumerate_spi(adap); + if (ret) { + dev_err(adap->dev, "enumerate SPI error\n"); + goto err_kill; + } + + return 0; + +err_kill: + adap->disconnect = true; + + usb_kill_urb(adap->rx_urb); + + list_for_each_entry_safe_reverse(client, next, &adap->client_list, link) { + auxiliary_device_delete(&client->auxdev); + auxiliary_device_uninit(&client->auxdev); + + list_del_init(&client->link); + kfree(client); + } + + return ret; +} + +static int ljca_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usb_dev = interface_to_usbdev(interface); + struct usb_host_interface *alt = interface->cur_altsetting; + struct usb_endpoint_descriptor *ep_in, *ep_out; + struct device *dev = &interface->dev; + struct ljca_adapter *adap; + int ret; + + adap = devm_kzalloc(dev, sizeof(*adap), GFP_KERNEL); + if (!adap) + return -ENOMEM; + + /* separate tx buffer allocation for alignment */ + adap->tx_buf = devm_kzalloc(dev, LJCA_MAX_PACKET_SIZE, GFP_KERNEL); + if (!adap->tx_buf) + return -ENOMEM; + adap->tx_buf_len = LJCA_MAX_PACKET_SIZE; + + mutex_init(&adap->mutex); + spin_lock_init(&adap->lock); + init_completion(&adap->cmd_completion); + INIT_LIST_HEAD(&adap->client_list); + + adap->intf = usb_get_intf(interface); + adap->usb_dev = usb_dev; + adap->dev = dev; + + /* + * find the first bulk in and out endpoints. + * ignore any others. + */ + ret = usb_find_common_endpoints(alt, &ep_in, &ep_out, NULL, NULL); + if (ret) { + dev_err(dev, "bulk endpoints not found\n"); + goto err_put; + } + adap->rx_pipe = usb_rcvbulkpipe(usb_dev, usb_endpoint_num(ep_in)); + adap->tx_pipe = usb_sndbulkpipe(usb_dev, usb_endpoint_num(ep_out)); + + /* setup rx buffer */ + adap->rx_len = usb_endpoint_maxp(ep_in); + adap->rx_buf = devm_kzalloc(dev, adap->rx_len, GFP_KERNEL); + if (!adap->rx_buf) { + ret = -ENOMEM; + goto err_put; + } + + /* alloc rx urb */ + adap->rx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!adap->rx_urb) { + ret = -ENOMEM; + goto err_put; + } + usb_fill_bulk_urb(adap->rx_urb, usb_dev, adap->rx_pipe, + adap->rx_buf, adap->rx_len, ljca_recv, adap); + + usb_set_intfdata(interface, adap); + + /* submit rx urb before enumerate clients */ + ret = usb_submit_urb(adap->rx_urb, GFP_KERNEL); + if (ret) { + dev_err(dev, "submit rx urb failed: %d\n", ret); + goto err_free; + } + + ret = ljca_enumerate_clients(adap); + if (ret) + goto err_free; + + usb_enable_autosuspend(usb_dev); + + return 0; + +err_free: + usb_free_urb(adap->rx_urb); + +err_put: + usb_put_intf(adap->intf); + + mutex_destroy(&adap->mutex); + + return ret; +} + +static void ljca_disconnect(struct usb_interface *interface) +{ + struct ljca_adapter *adap = usb_get_intfdata(interface); + struct ljca_client *client, *next; + + adap->disconnect = true; + + usb_kill_urb(adap->rx_urb); + + list_for_each_entry_safe_reverse(client, next, &adap->client_list, link) { + auxiliary_device_delete(&client->auxdev); + auxiliary_device_uninit(&client->auxdev); + + list_del_init(&client->link); + kfree(client); + } + + usb_free_urb(adap->rx_urb); + + usb_put_intf(adap->intf); + + mutex_destroy(&adap->mutex); +} + +static int ljca_suspend(struct usb_interface *interface, pm_message_t message) +{ + struct ljca_adapter *adap = usb_get_intfdata(interface); + + usb_kill_urb(adap->rx_urb); + + return 0; +} + +static int ljca_resume(struct usb_interface *interface) +{ + struct ljca_adapter *adap = usb_get_intfdata(interface); + + return usb_submit_urb(adap->rx_urb, GFP_KERNEL); +} + +static const struct usb_device_id ljca_table[] = { + { USB_DEVICE(0x8086, 0x0b63) }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(usb, ljca_table); + +static struct usb_driver ljca_driver = { + .name = "ljca", + .id_table = ljca_table, + .probe = ljca_probe, + .disconnect = ljca_disconnect, + .suspend = ljca_suspend, + .resume = ljca_resume, + .supports_autosuspend = 1, +}; +module_usb_driver(ljca_driver); + +MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); +MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); +MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); +MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index ac0d75ac2d2f..caf65f8294db 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -705,7 +705,7 @@ static int is_good_config(struct usbtest_dev *tdev, int len) { struct usb_config_descriptor *config; - if (len < sizeof(*config)) + if (len < (int)sizeof(*config)) return 0; config = (struct usb_config_descriptor *) tdev->buf; diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 9812d102a005..824904abe76f 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -81,15 +81,12 @@ void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r) static void mon_bus_submit(struct mon_bus *mbus, struct urb *urb) { unsigned long flags; - struct list_head *pos; struct mon_reader *r; spin_lock_irqsave(&mbus->lock, flags); mbus->cnt_events++; - list_for_each (pos, &mbus->r_list) { - r = list_entry(pos, struct mon_reader, r_link); + list_for_each_entry(r, &mbus->r_list, r_link) r->rnf_submit(r->r_data, urb); - } spin_unlock_irqrestore(&mbus->lock, flags); } @@ -108,15 +105,12 @@ static void mon_submit(struct usb_bus *ubus, struct urb *urb) static void mon_bus_submit_error(struct mon_bus *mbus, struct urb *urb, int error) { unsigned long flags; - struct list_head *pos; struct mon_reader *r; spin_lock_irqsave(&mbus->lock, flags); mbus->cnt_events++; - list_for_each (pos, &mbus->r_list) { - r = list_entry(pos, struct mon_reader, r_link); + list_for_each_entry(r, &mbus->r_list, r_link) r->rnf_error(r->r_data, urb, error); - } spin_unlock_irqrestore(&mbus->lock, flags); } @@ -135,15 +129,12 @@ static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error) static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb, int status) { unsigned long flags; - struct list_head *pos; struct mon_reader *r; spin_lock_irqsave(&mbus->lock, flags); mbus->cnt_events++; - list_for_each (pos, &mbus->r_list) { - r = list_entry(pos, struct mon_reader, r_link); + list_for_each_entry(r, &mbus->r_list, r_link) r->rnf_complete(r->r_data, urb, status); - } spin_unlock_irqrestore(&mbus->lock, flags); } @@ -165,11 +156,9 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb, int status) static void mon_stop(struct mon_bus *mbus) { struct usb_bus *ubus; - struct list_head *p; if (mbus == &mon_bus0) { - list_for_each (p, &mon_buses) { - mbus = list_entry(p, struct mon_bus, bus_link); + list_for_each_entry(mbus, &mon_buses, bus_link) { /* * We do not change nreaders here, so rely on mon_lock. */ @@ -332,14 +321,12 @@ static void mon_bus0_init(void) */ struct mon_bus *mon_bus_lookup(unsigned int num) { - struct list_head *p; struct mon_bus *mbus; if (num == 0) { return &mon_bus0; } - list_for_each (p, &mon_buses) { - mbus = list_entry(p, struct mon_bus, bus_link); + list_for_each_entry(mbus, &mon_buses, bus_link) { if (mbus->u_bus->busnum == num) { return mbus; } diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index 6f264b129243..6858ed9fc3b2 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -451,7 +451,7 @@ comm_init_err: return ret; } -static int mtu3_remove(struct platform_device *pdev) +static void mtu3_remove(struct platform_device *pdev) { struct ssusb_mtk *ssusb = platform_get_drvdata(pdev); @@ -469,8 +469,16 @@ static int mtu3_remove(struct platform_device *pdev) ssusb_gadget_exit(ssusb); ssusb_host_exit(ssusb); break; - default: - return -EINVAL; + case USB_DR_MODE_UNKNOWN: + /* + * This cannot happen because with dr_mode == + * USB_DR_MODE_UNKNOWN, .probe() doesn't succeed and so + * .remove() wouldn't be called at all. However (little + * surprising) the compiler isn't smart enough to see that, so + * we explicitly have this case item to not make the compiler + * wail about an unhandled enumeration value. + */ + break; } ssusb_rscs_exit(ssusb); @@ -478,8 +486,6 @@ static int mtu3_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); - - return 0; } static int resume_ip_and_ports(struct ssusb_mtk *ssusb, pm_message_t msg) @@ -615,7 +621,7 @@ MODULE_DEVICE_TABLE(of, mtu3_of_match); static struct platform_driver mtu3_driver = { .probe = mtu3_probe, - .remove = mtu3_remove, + .remove_new = mtu3_remove, .driver = { .name = MTU3_DRIVER_NAME, .pm = DEV_PM_OPS, diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 912e32b78ac6..8abf3a567e30 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -17,6 +17,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 98b42dc04dee..9c7a8bbc0542 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -849,7 +849,7 @@ static int dsps_setup_optional_vbus_irq(struct platform_device *pdev, error = devm_request_threaded_irq(glue->dev, glue->vbus_irq, NULL, dsps_vbus_threaded_irq, - IRQF_ONESHOT, + IRQF_SHARED, "vbus", glue); if (error) { glue->vbus_irq = 0; diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h index d73282c0ec50..4d3b49e5b87a 100644 --- a/drivers/usb/storage/uas-detect.h +++ b/drivers/usb/storage/uas-detect.h @@ -54,12 +54,12 @@ static int uas_find_endpoints(struct usb_host_interface *alt, static int uas_use_uas_driver(struct usb_interface *intf, const struct usb_device_id *id, - unsigned long *flags_ret) + u64 *flags_ret) { struct usb_host_endpoint *eps[4] = { }; struct usb_device *udev = interface_to_usbdev(intf); struct usb_hcd *hcd = bus_to_hcd(udev->bus); - unsigned long flags = id->driver_info; + u64 flags = id->driver_info; struct usb_host_interface *alt; int r; diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 2583ee9815c5..696bb0b23599 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -37,7 +37,7 @@ struct uas_dev_info { struct usb_anchor cmd_urbs; struct usb_anchor sense_urbs; struct usb_anchor data_urbs; - unsigned long flags; + u64 flags; int qdepth, resetting; unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; unsigned use_streams:1; @@ -988,7 +988,7 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) struct Scsi_Host *shost = NULL; struct uas_dev_info *devinfo; struct usb_device *udev = interface_to_usbdev(intf); - unsigned long dev_flags; + u64 dev_flags; if (!uas_use_uas_driver(intf, id, &dev_flags)) return -ENODEV; diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h index 0547daf116a2..5df40759d77a 100644 --- a/drivers/usb/storage/unusual_cypress.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -19,7 +19,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), -UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160, +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0150, 0x0160, "Super Top", "USB 2.0 SATA BRIDGE", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 7b36a3334fb3..d1ad6a2509ab 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -110,17 +110,6 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); .useTransport = use_transport, \ } -#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \ - vendor_name, product_name, use_protocol, use_transport, \ - init_function, Flags) \ -{ \ - .vendorName = vendor_name, \ - .productName = product_name, \ - .useProtocol = use_protocol, \ - .useTransport = use_transport, \ - .initFunction = init_function, \ -} - static const struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" { } /* Terminating entry */ @@ -132,7 +121,6 @@ static const struct us_unusual_dev for_dynamic_ids = #undef UNUSUAL_DEV #undef COMPLIANT_DEV #undef USUAL_DEV -#undef UNUSUAL_VENDOR_INTF #ifdef CONFIG_LOCKDEP @@ -472,13 +460,13 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf) #define TOLOWER(x) ((x) | 0x20) /* Adjust device flags based on the "quirks=" module parameter */ -void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) +void usb_stor_adjust_quirks(struct usb_device *udev, u64 *fflags) { char *p; u16 vid = le16_to_cpu(udev->descriptor.idVendor); u16 pid = le16_to_cpu(udev->descriptor.idProduct); - unsigned f = 0; - unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | + u64 f = 0; + u64 mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS | US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | @@ -617,7 +605,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id, us->fflags &= ~US_FL_GO_SLOW; if (us->fflags) - dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n", + dev_info(pdev, "Quirks match for vid %04x pid %04x: %llx\n", le16_to_cpu(dev->descriptor.idVendor), le16_to_cpu(dev->descriptor.idProduct), us->fflags); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index fd3f32670873..97c6196d639b 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -95,7 +95,7 @@ struct us_data { struct usb_interface *pusb_intf; /* this interface */ const struct us_unusual_dev *unusual_dev; /* device-filter entry */ - unsigned long fflags; /* fixed flags from filter */ + u64 fflags; /* fixed flags from filter */ unsigned long dflags; /* dynamic atomic bitflags */ unsigned int send_bulk_pipe; /* cached pipe values */ unsigned int recv_bulk_pipe; @@ -192,7 +192,7 @@ extern int usb_stor_probe2(struct us_data *us); extern void usb_stor_disconnect(struct usb_interface *intf); extern void usb_stor_adjust_quirks(struct usb_device *dev, - unsigned long *fflags); + u64 *fflags); #define module_usb_stor_driver(__driver, __sht, __name) \ static int __init __driver##_init(void) \ diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 529512827d8f..a26029e43dfd 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -19,27 +19,13 @@ vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags) } + .driver_info = (kernel_ulong_t)(flags) } #define COMPLIANT_DEV UNUSUAL_DEV #define USUAL_DEV(useProto, useTrans) \ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) } -/* Define the device is matched with Vendor ID and interface descriptors */ -#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \ - vendorName, productName, useProtocol, useTransport, \ - initFunction, flags) \ -{ \ - .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ - | USB_DEVICE_ID_MATCH_VENDOR, \ - .idVendor = (id_vendor), \ - .bInterfaceClass = (cl), \ - .bInterfaceSubClass = (sc), \ - .bInterfaceProtocol = (pr), \ - .driver_info = (flags) \ -} - const struct usb_device_id usb_storage_usb_ids[] = { # include "unusual_devs.h" { } /* Terminating entry */ @@ -49,7 +35,6 @@ MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids); #undef UNUSUAL_DEV #undef COMPLIANT_DEV #undef USUAL_DEV -#undef UNUSUAL_VENDOR_INTF /* * The table of devices to ignore diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index aea9d2fd0e76..f81bec0c7b86 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -86,8 +86,11 @@ static int dp_altmode_notify(struct dp_altmode *dp) static int dp_altmode_configure(struct dp_altmode *dp, u8 con) { - u32 conf = DP_CONF_SIGNALING_DP; /* Only DP signaling supported */ u8 pin_assign = 0; + u32 conf; + + /* DP Signalling */ + conf = (dp->data.conf & DP_CONF_SIGNALLING_MASK) >> DP_CONF_SIGNALLING_SHIFT; switch (con) { case DP_STATUS_CON_DISABLED: diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c index 221604f933a4..b12a07edc71b 100644 --- a/drivers/usb/typec/anx7411.c +++ b/drivers/usb/typec/anx7411.c @@ -1550,8 +1550,7 @@ static void anx7411_i2c_remove(struct i2c_client *client) if (plat->workqueue) destroy_workqueue(plat->workqueue); - if (plat->spi_client) - i2c_unregister_device(plat->spi_client); + i2c_unregister_device(plat->spi_client); if (plat->typec.role_sw) usb_role_switch_put(plat->typec.role_sw); diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 9c1dbf3c00e0..2e0451bd336e 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -13,6 +13,7 @@ #include <linux/usb/pd_vdo.h> #include <linux/usb/typec_mux.h> #include <linux/usb/typec_retimer.h> +#include <linux/usb.h> #include "bus.h" #include "class.h" @@ -681,6 +682,33 @@ const struct device_type typec_partner_dev_type = { .release = typec_partner_release, }; +static void typec_partner_link_device(struct typec_partner *partner, struct device *dev) +{ + int ret; + + ret = sysfs_create_link(&dev->kobj, &partner->dev.kobj, "typec"); + if (ret) + return; + + ret = sysfs_create_link(&partner->dev.kobj, &dev->kobj, dev_name(dev)); + if (ret) { + sysfs_remove_link(&dev->kobj, "typec"); + return; + } + + if (partner->attach) + partner->attach(partner, dev); +} + +static void typec_partner_unlink_device(struct typec_partner *partner, struct device *dev) +{ + sysfs_remove_link(&partner->dev.kobj, dev_name(dev)); + sysfs_remove_link(&dev->kobj, "typec"); + + if (partner->deattach) + partner->deattach(partner, dev); +} + /** * typec_partner_set_identity - Report result from Discover Identity command * @partner: The partner updated identity values @@ -865,6 +893,8 @@ struct typec_partner *typec_register_partner(struct typec_port *port, partner->num_altmodes = -1; partner->pd_revision = desc->pd_revision; partner->svdm_version = port->cap->svdm_version; + partner->attach = desc->attach; + partner->deattach = desc->deattach; if (desc->identity) { /* @@ -887,6 +917,11 @@ struct typec_partner *typec_register_partner(struct typec_port *port, return ERR_PTR(ret); } + if (port->usb2_dev) + typec_partner_link_device(partner, port->usb2_dev); + if (port->usb3_dev) + typec_partner_link_device(partner, port->usb3_dev); + return partner; } EXPORT_SYMBOL_GPL(typec_register_partner); @@ -899,8 +934,19 @@ EXPORT_SYMBOL_GPL(typec_register_partner); */ void typec_unregister_partner(struct typec_partner *partner) { - if (!IS_ERR_OR_NULL(partner)) - device_unregister(&partner->dev); + struct typec_port *port; + + if (IS_ERR_OR_NULL(partner)) + return; + + port = to_typec_port(partner->dev.parent); + + if (port->usb2_dev) + typec_partner_unlink_device(partner, port->usb2_dev); + if (port->usb3_dev) + typec_partner_unlink_device(partner, port->usb3_dev); + + device_unregister(&partner->dev); } EXPORT_SYMBOL_GPL(typec_unregister_partner); @@ -1775,6 +1821,50 @@ static int partner_match(struct device *dev, void *data) return is_typec_partner(dev); } +static struct typec_partner *typec_get_partner(struct typec_port *port) +{ + struct device *dev; + + dev = device_find_child(&port->dev, NULL, partner_match); + if (!dev) + return NULL; + + return to_typec_partner(dev); +} + +static void typec_partner_attach(struct typec_connector *con, struct device *dev) +{ + struct typec_port *port = container_of(con, struct typec_port, con); + struct typec_partner *partner = typec_get_partner(port); + struct usb_device *udev = to_usb_device(dev); + + if (udev->speed < USB_SPEED_SUPER) + port->usb2_dev = dev; + else + port->usb3_dev = dev; + + if (partner) { + typec_partner_link_device(partner, dev); + put_device(&partner->dev); + } +} + +static void typec_partner_deattach(struct typec_connector *con, struct device *dev) +{ + struct typec_port *port = container_of(con, struct typec_port, con); + struct typec_partner *partner = typec_get_partner(port); + + if (partner) { + typec_partner_unlink_device(partner, dev); + put_device(&partner->dev); + } + + if (port->usb2_dev == dev) + port->usb2_dev = NULL; + else if (port->usb3_dev == dev) + port->usb3_dev = NULL; +} + /** * typec_set_data_role - Report data role change * @port: The USB Type-C Port where the role was changed @@ -1784,7 +1874,7 @@ static int partner_match(struct device *dev, void *data) */ void typec_set_data_role(struct typec_port *port, enum typec_data_role role) { - struct device *partner_dev; + struct typec_partner *partner; if (port->data_role == role) return; @@ -1793,14 +1883,14 @@ void typec_set_data_role(struct typec_port *port, enum typec_data_role role) sysfs_notify(&port->dev.kobj, NULL, "data_role"); kobject_uevent(&port->dev.kobj, KOBJ_CHANGE); - partner_dev = device_find_child(&port->dev, NULL, partner_match); - if (!partner_dev) + partner = typec_get_partner(port); + if (!partner) return; - if (to_typec_partner(partner_dev)->identity) - typec_product_type_notify(partner_dev); + if (partner->identity) + typec_product_type_notify(&partner->dev); - put_device(partner_dev); + put_device(&partner->dev); } EXPORT_SYMBOL_GPL(typec_set_data_role); @@ -2251,6 +2341,8 @@ struct typec_port *typec_register_port(struct device *parent, port->ops = cap->ops; port->port_type = cap->type; port->prefer_role = cap->prefer_role; + port->con.attach = typec_partner_attach; + port->con.deattach = typec_partner_deattach; device_initialize(&port->dev); port->dev.class = &typec_class; diff --git a/drivers/usb/typec/class.h b/drivers/usb/typec/class.h index 673b2952b074..c36761ba3f59 100644 --- a/drivers/usb/typec/class.h +++ b/drivers/usb/typec/class.h @@ -8,6 +8,7 @@ struct typec_mux; struct typec_switch; +struct usb_device; struct typec_plug { struct device dev; @@ -35,6 +36,9 @@ struct typec_partner { enum usb_pd_svdm_ver svdm_version; struct usb_power_delivery *pd; + + void (*attach)(struct typec_partner *partner, struct device *dev); + void (*deattach)(struct typec_partner *partner, struct device *dev); }; struct typec_port { @@ -59,6 +63,18 @@ struct typec_port { const struct typec_capability *cap; const struct typec_operations *ops; + + struct typec_connector con; + + /* + * REVISIT: Only USB devices for now. If there are others, these need to + * be converted into a list. + * + * NOTE: These may be registered first before the typec_partner, so they + * will always have to be kept here instead of struct typec_partner. + */ + struct device *usb2_dev; + struct device *usb3_dev; }; #define to_typec_port(_dev_) container_of(_dev_, struct typec_port, dev) diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig index 65da61150ba7..816b9bd08355 100644 --- a/drivers/usb/typec/mux/Kconfig +++ b/drivers/usb/typec/mux/Kconfig @@ -46,4 +46,14 @@ config TYPEC_MUX_NB7VPQ904M Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C redriver chip found on some devices with a Type-C port. +config TYPEC_MUX_PTN36502 + tristate "NXP PTN36502 Type-C redriver driver" + depends on I2C + depends on DRM || DRM=n + select DRM_PANEL_BRIDGE if DRM + select REGMAP_I2C + help + Say Y or M if your system has a NXP PTN36502 Type-C redriver chip + found on some devices with a Type-C port. + endmenu diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile index 76196096ef41..9d6a5557b0bd 100644 --- a/drivers/usb/typec/mux/Makefile +++ b/drivers/usb/typec/mux/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o +obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c index e0ee1f621abb..cb7cdf90cb0a 100644 --- a/drivers/usb/typec/mux/fsa4480.c +++ b/drivers/usb/typec/mux/fsa4480.c @@ -60,6 +60,7 @@ struct fsa4480 { unsigned int svid; u8 cur_enable; + bool swap_sbu_lanes; }; static const struct regmap_config fsa4480_regmap_config = { @@ -76,6 +77,9 @@ static int fsa4480_set(struct fsa4480 *fsa) u8 enable = FSA4480_ENABLE_DEVICE; u8 sel = 0; + if (fsa->swap_sbu_lanes) + reverse = !reverse; + /* USB Mode */ if (fsa->mode < TYPEC_STATE_MODAL || (!fsa->svid && (fsa->mode == TYPEC_MODE_USB2 || @@ -179,12 +183,75 @@ static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *st return ret; } +enum { + NORMAL_LANE_MAPPING, + INVERT_LANE_MAPPING, +}; + +#define DATA_LANES_COUNT 2 + +static const int supported_data_lane_mapping[][DATA_LANES_COUNT] = { + [NORMAL_LANE_MAPPING] = { 0, 1 }, + [INVERT_LANE_MAPPING] = { 1, 0 }, +}; + +static int fsa4480_parse_data_lanes_mapping(struct fsa4480 *fsa) +{ + struct fwnode_handle *ep; + u32 data_lanes[DATA_LANES_COUNT]; + int ret, i, j; + + ep = fwnode_graph_get_next_endpoint(dev_fwnode(&fsa->client->dev), NULL); + if (!ep) + return 0; + + ret = fwnode_property_read_u32_array(ep, "data-lanes", data_lanes, DATA_LANES_COUNT); + if (ret == -EINVAL) + /* Property isn't here, consider default mapping */ + goto out_done; + if (ret) { + dev_err(&fsa->client->dev, "invalid data-lanes property: %d\n", ret); + goto out_error; + } + + for (i = 0; i < ARRAY_SIZE(supported_data_lane_mapping); i++) { + for (j = 0; j < DATA_LANES_COUNT; j++) { + if (data_lanes[j] != supported_data_lane_mapping[i][j]) + break; + } + + if (j == DATA_LANES_COUNT) + break; + } + + switch (i) { + case NORMAL_LANE_MAPPING: + break; + case INVERT_LANE_MAPPING: + fsa->swap_sbu_lanes = true; + break; + default: + dev_err(&fsa->client->dev, "invalid data-lanes mapping\n"); + ret = -EINVAL; + goto out_error; + } + +out_done: + ret = 0; + +out_error: + fwnode_handle_put(ep); + + return ret; +} + static int fsa4480_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct typec_switch_desc sw_desc = { }; struct typec_mux_desc mux_desc = { }; struct fsa4480 *fsa; + int ret; fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL); if (!fsa) @@ -193,6 +260,10 @@ static int fsa4480_probe(struct i2c_client *client) fsa->client = client; mutex_init(&fsa->lock); + ret = fsa4480_parse_data_lanes_mapping(fsa); + if (ret) + return ret; + fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config); if (IS_ERR(fsa->regmap)) return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n"); diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index 60ed1f809130..56989a0d0f43 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -191,6 +191,12 @@ static int hsl_orientation(struct pmc_usb_port *port) return port->orientation - 1; } +static bool is_pmc_mux_tbt(struct acpi_device *adev) +{ + return acpi_dev_hid_uid_match(adev, "INTC1072", NULL) || + acpi_dev_hid_uid_match(adev, "INTC1079", NULL); +} + static int pmc_usb_send_command(struct intel_scu_ipc_dev *ipc, u8 *msg, u32 len) { u8 response[4]; @@ -293,6 +299,24 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state) req.mode_data |= (state->mode - TYPEC_STATE_MODAL) << PMC_USB_ALTMODE_DP_MODE_SHIFT; + if (!is_pmc_mux_tbt(port->pmc->iom_adev)) { + u8 cable_speed = (data->conf & DP_CONF_SIGNALLING_MASK) >> + DP_CONF_SIGNALLING_SHIFT; + + u8 cable_type = (data->conf & DP_CONF_CABLE_TYPE_MASK) >> + DP_CONF_CABLE_TYPE_SHIFT; + + req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed); + + if (cable_type == DP_CONF_CABLE_TYPE_OPTICAL) + req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE; + else if (cable_type == DP_CONF_CABLE_TYPE_RE_TIMER) + req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE | + PMC_USB_ALTMODE_RETIMER_CABLE; + else if (cable_type == DP_CONF_CABLE_TYPE_RE_DRIVER) + req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE; + } + ret = pmc_usb_command(port, (void *)&req, sizeof(req)); if (ret) return ret; @@ -599,6 +623,7 @@ static int pmc_usb_register_port(struct pmc_usb *pmc, int index, desc.driver_data = port; desc.name = fwnode_get_name(fwnode); desc.set = pmc_usb_set_role; + desc.allow_userspace_control = true; port->usb_sw = usb_role_switch_register(pmc->dev, &desc); if (IS_ERR(port->usb_sw)) { diff --git a/drivers/usb/typec/mux/ptn36502.c b/drivers/usb/typec/mux/ptn36502.c new file mode 100644 index 000000000000..72ae38a1b2be --- /dev/null +++ b/drivers/usb/typec/mux/ptn36502.c @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NXP PTN36502 Type-C driver + * + * Copyright (C) 2023 Luca Weiss <luca.weiss@fairphone.com> + * + * Based on NB7VPQ904M driver: + * Copyright (C) 2023 Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + */ + +#include <drm/drm_bridge.h> +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_graph.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> +#include <linux/usb/typec_retimer.h> + +#define PTN36502_CHIP_ID_REG 0x00 +#define PTN36502_CHIP_ID 0x02 + +#define PTN36502_CHIP_REVISION_REG 0x01 +#define PTN36502_CHIP_REVISION_BASE_MASK GENMASK(7, 4) +#define PTN36502_CHIP_REVISION_METAL_MASK GENMASK(3, 0) + +#define PTN36502_DP_LINK_CTRL_REG 0x06 +#define PTN36502_DP_LINK_CTRL_LANES_MASK GENMASK(3, 2) +#define PTN36502_DP_LINK_CTRL_LANES_2 (2) +#define PTN36502_DP_LINK_CTRL_LANES_4 (3) +#define PTN36502_DP_LINK_CTRL_LINK_RATE_MASK GENMASK(1, 0) +#define PTN36502_DP_LINK_CTRL_LINK_RATE_5_4GBPS (2) + +/* Registers for lane 0 (0x07) to lane 3 (0x0a) have the same layout */ +#define PTN36502_DP_LANE_CTRL_REG(n) (0x07 + (n)) +#define PTN36502_DP_LANE_CTRL_RX_GAIN_MASK GENMASK(6, 4) +#define PTN36502_DP_LANE_CTRL_RX_GAIN_3DB (2) +#define PTN36502_DP_LANE_CTRL_TX_SWING_MASK GENMASK(3, 2) +#define PTN36502_DP_LANE_CTRL_TX_SWING_800MVPPD (2) +#define PTN36502_DP_LANE_CTRL_PRE_EMPHASIS_MASK GENMASK(1, 0) +#define PTN36502_DP_LANE_CTRL_PRE_EMPHASIS_3_5DB (1) + +#define PTN36502_MODE_CTRL1_REG 0x0b +#define PTN36502_MODE_CTRL1_PLUG_ORIENT_MASK GENMASK(5, 5) +#define PTN36502_MODE_CTRL1_PLUG_ORIENT_REVERSE (1) +#define PTN36502_MODE_CTRL1_AUX_CROSSBAR_MASK GENMASK(3, 3) +#define PTN36502_MODE_CTRL1_AUX_CROSSBAR_SW_ON (1) +#define PTN36502_MODE_CTRL1_MODE_MASK GENMASK(2, 0) +#define PTN36502_MODE_CTRL1_MODE_OFF (0) +#define PTN36502_MODE_CTRL1_MODE_USB_ONLY (1) +#define PTN36502_MODE_CTRL1_MODE_USB_DP (2) +#define PTN36502_MODE_CTRL1_MODE_DP (3) + +#define PTN36502_DEVICE_CTRL_REG 0x0d +#define PTN36502_DEVICE_CTRL_AUX_MONITORING_MASK GENMASK(7, 7) +#define PTN36502_DEVICE_CTRL_AUX_MONITORING_EN (1) + +struct ptn36502 { + struct i2c_client *client; + struct regulator *vdd18_supply; + struct regmap *regmap; + struct typec_switch_dev *sw; + struct typec_retimer *retimer; + + struct typec_switch *typec_switch; + + struct drm_bridge bridge; + + struct mutex lock; /* protect non-concurrent retimer & switch */ + + enum typec_orientation orientation; + unsigned long mode; + unsigned int svid; +}; + +static int ptn36502_set(struct ptn36502 *ptn) +{ + bool reverse = (ptn->orientation == TYPEC_ORIENTATION_REVERSE); + unsigned int ctrl1_val = 0; + unsigned int lane_ctrl_val = 0; + unsigned int link_ctrl_val = 0; + + switch (ptn->mode) { + case TYPEC_STATE_SAFE: + /* Deep power saving state */ + regmap_write(ptn->regmap, PTN36502_MODE_CTRL1_REG, + FIELD_PREP(PTN36502_MODE_CTRL1_MODE_MASK, + PTN36502_MODE_CTRL1_MODE_OFF)); + return 0; + + case TYPEC_STATE_USB: + /* + * Normal Orientation (CC1) + * A -> USB RX + * B -> USB TX + * C -> X + * D -> X + * Flipped Orientation (CC2) + * A -> X + * B -> X + * C -> USB TX + * D -> USB RX + */ + + /* USB 3.1 Gen 1 only */ + ctrl1_val = FIELD_PREP(PTN36502_MODE_CTRL1_MODE_MASK, + PTN36502_MODE_CTRL1_MODE_USB_ONLY); + if (reverse) + ctrl1_val |= FIELD_PREP(PTN36502_MODE_CTRL1_PLUG_ORIENT_MASK, + PTN36502_MODE_CTRL1_PLUG_ORIENT_REVERSE); + + regmap_write(ptn->regmap, PTN36502_MODE_CTRL1_REG, ctrl1_val); + return 0; + + default: + if (ptn->svid != USB_TYPEC_DP_SID) + return -EINVAL; + + break; + } + + /* DP Altmode Setup */ + + switch (ptn->mode) { + case TYPEC_DP_STATE_C: + case TYPEC_DP_STATE_E: + /* + * Normal Orientation (CC1) + * A -> DP3 + * B -> DP2 + * C -> DP1 + * D -> DP0 + * Flipped Orientation (CC2) + * A -> DP0 + * B -> DP1 + * C -> DP2 + * D -> DP3 + */ + + /* 4-lane DP */ + ctrl1_val |= FIELD_PREP(PTN36502_MODE_CTRL1_MODE_MASK, + PTN36502_MODE_CTRL1_MODE_DP); + link_ctrl_val |= FIELD_PREP(PTN36502_DP_LINK_CTRL_LANES_MASK, + PTN36502_DP_LINK_CTRL_LANES_4); + break; + + case TYPEC_DP_STATE_D: + case TYPEC_DP_STATE_F: /* State F is deprecated */ + /* + * Normal Orientation (CC1) + * A -> USB RX + * B -> USB TX + * C -> DP1 + * D -> DP0 + * Flipped Orientation (CC2) + * A -> DP0 + * B -> DP1 + * C -> USB TX + * D -> USB RX + */ + + /* USB 3.1 Gen 1 and 2-lane DP */ + ctrl1_val |= FIELD_PREP(PTN36502_MODE_CTRL1_MODE_MASK, + PTN36502_MODE_CTRL1_MODE_USB_DP); + link_ctrl_val |= FIELD_PREP(PTN36502_DP_LINK_CTRL_LANES_MASK, + PTN36502_DP_LINK_CTRL_LANES_2); + break; + + default: + return -EOPNOTSUPP; + } + + /* Enable AUX monitoring */ + regmap_write(ptn->regmap, PTN36502_DEVICE_CTRL_REG, + FIELD_PREP(PTN36502_DEVICE_CTRL_AUX_MONITORING_MASK, + PTN36502_DEVICE_CTRL_AUX_MONITORING_EN)); + + /* Enable AUX switch path */ + ctrl1_val |= FIELD_PREP(PTN36502_MODE_CTRL1_AUX_CROSSBAR_MASK, + PTN36502_MODE_CTRL1_AUX_CROSSBAR_SW_ON); + if (reverse) + ctrl1_val |= FIELD_PREP(PTN36502_MODE_CTRL1_PLUG_ORIENT_MASK, + PTN36502_MODE_CTRL1_PLUG_ORIENT_REVERSE); + regmap_write(ptn->regmap, PTN36502_MODE_CTRL1_REG, ctrl1_val); + + /* DP Link rate: 5.4 Gbps (HBR2) */ + link_ctrl_val |= FIELD_PREP(PTN36502_DP_LINK_CTRL_LINK_RATE_MASK, + PTN36502_DP_LINK_CTRL_LINK_RATE_5_4GBPS); + regmap_write(ptn->regmap, PTN36502_DP_LINK_CTRL_REG, link_ctrl_val); + + /* + * For all lanes: + * - Rx equivalization gain: 3 dB + * - TX output swing control: 800 mVppd + * - Pre-emphasis control: 3.5 dB + */ + lane_ctrl_val = FIELD_PREP(PTN36502_DP_LANE_CTRL_RX_GAIN_MASK, + PTN36502_DP_LANE_CTRL_RX_GAIN_3DB) | + FIELD_PREP(PTN36502_DP_LANE_CTRL_TX_SWING_MASK, + PTN36502_DP_LANE_CTRL_TX_SWING_800MVPPD) | + FIELD_PREP(PTN36502_DP_LANE_CTRL_PRE_EMPHASIS_MASK, + PTN36502_DP_LANE_CTRL_PRE_EMPHASIS_3_5DB); + regmap_write(ptn->regmap, PTN36502_DP_LANE_CTRL_REG(0), lane_ctrl_val); + regmap_write(ptn->regmap, PTN36502_DP_LANE_CTRL_REG(1), lane_ctrl_val); + regmap_write(ptn->regmap, PTN36502_DP_LANE_CTRL_REG(2), lane_ctrl_val); + regmap_write(ptn->regmap, PTN36502_DP_LANE_CTRL_REG(3), lane_ctrl_val); + + return 0; +} + +static int ptn36502_sw_set(struct typec_switch_dev *sw, enum typec_orientation orientation) +{ + struct ptn36502 *ptn = typec_switch_get_drvdata(sw); + int ret; + + ret = typec_switch_set(ptn->typec_switch, orientation); + if (ret) + return ret; + + mutex_lock(&ptn->lock); + + if (ptn->orientation != orientation) { + ptn->orientation = orientation; + + ret = ptn36502_set(ptn); + } + + mutex_unlock(&ptn->lock); + + return ret; +} + +static int ptn36502_retimer_set(struct typec_retimer *retimer, struct typec_retimer_state *state) +{ + struct ptn36502 *ptn = typec_retimer_get_drvdata(retimer); + int ret = 0; + + mutex_lock(&ptn->lock); + + if (ptn->mode != state->mode) { + ptn->mode = state->mode; + + if (state->alt) + ptn->svid = state->alt->svid; + else + ptn->svid = 0; // No SVID + + ret = ptn36502_set(ptn); + } + + mutex_unlock(&ptn->lock); + + return ret; +} + +static int ptn36502_detect(struct ptn36502 *ptn) +{ + struct device *dev = &ptn->client->dev; + unsigned int reg_val; + int ret; + + ret = regmap_read(ptn->regmap, PTN36502_CHIP_ID_REG, + ®_val); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to read chip ID\n"); + + if (reg_val != PTN36502_CHIP_ID) + return dev_err_probe(dev, -ENODEV, "Unexpected chip ID: %x\n", reg_val); + + ret = regmap_read(ptn->regmap, PTN36502_CHIP_REVISION_REG, + ®_val); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to read chip revision\n"); + + dev_dbg(dev, "Chip revision: base layer version %lx, metal layer version %lx\n", + FIELD_GET(PTN36502_CHIP_REVISION_BASE_MASK, reg_val), + FIELD_GET(PTN36502_CHIP_REVISION_METAL_MASK, reg_val)); + + return 0; +} + +#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DRM_PANEL_BRIDGE) +static int ptn36502_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct ptn36502 *ptn = container_of(bridge, struct ptn36502, bridge); + struct drm_bridge *next_bridge; + + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) + return -EINVAL; + + next_bridge = devm_drm_of_get_bridge(&ptn->client->dev, ptn->client->dev.of_node, 0, 0); + if (IS_ERR(next_bridge)) { + dev_err(&ptn->client->dev, "failed to acquire drm_bridge: %pe\n", next_bridge); + return PTR_ERR(next_bridge); + } + + return drm_bridge_attach(bridge->encoder, next_bridge, bridge, + DRM_BRIDGE_ATTACH_NO_CONNECTOR); +} + +static const struct drm_bridge_funcs ptn36502_bridge_funcs = { + .attach = ptn36502_bridge_attach, +}; + +static int ptn36502_register_bridge(struct ptn36502 *ptn) +{ + ptn->bridge.funcs = &ptn36502_bridge_funcs; + ptn->bridge.of_node = ptn->client->dev.of_node; + + return devm_drm_bridge_add(&ptn->client->dev, &ptn->bridge); +} +#else +static int ptn36502_register_bridge(struct ptn36502 *ptn) +{ + return 0; +} +#endif + +static const struct regmap_config ptn36502_regmap = { + .max_register = 0x0d, + .reg_bits = 8, + .val_bits = 8, +}; + +static int ptn36502_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct typec_switch_desc sw_desc = { }; + struct typec_retimer_desc retimer_desc = { }; + struct ptn36502 *ptn; + int ret; + + ptn = devm_kzalloc(dev, sizeof(*ptn), GFP_KERNEL); + if (!ptn) + return -ENOMEM; + + ptn->client = client; + + ptn->regmap = devm_regmap_init_i2c(client, &ptn36502_regmap); + if (IS_ERR(ptn->regmap)) { + dev_err(&client->dev, "Failed to allocate register map\n"); + return PTR_ERR(ptn->regmap); + } + + ptn->mode = TYPEC_STATE_SAFE; + ptn->orientation = TYPEC_ORIENTATION_NONE; + + mutex_init(&ptn->lock); + + ptn->vdd18_supply = devm_regulator_get_optional(dev, "vdd18"); + if (IS_ERR(ptn->vdd18_supply)) + return PTR_ERR(ptn->vdd18_supply); + + ptn->typec_switch = fwnode_typec_switch_get(dev->fwnode); + if (IS_ERR(ptn->typec_switch)) + return dev_err_probe(dev, PTR_ERR(ptn->typec_switch), + "Failed to acquire orientation-switch\n"); + + ret = regulator_enable(ptn->vdd18_supply); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable vdd18\n"); + + ret = ptn36502_detect(ptn); + if (ret) + goto err_disable_regulator; + + ret = ptn36502_register_bridge(ptn); + if (ret) + goto err_disable_regulator; + + sw_desc.drvdata = ptn; + sw_desc.fwnode = dev->fwnode; + sw_desc.set = ptn36502_sw_set; + + ptn->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(ptn->sw)) { + ret = dev_err_probe(dev, PTR_ERR(ptn->sw), + "Failed to register typec switch\n"); + goto err_disable_regulator; + } + + retimer_desc.drvdata = ptn; + retimer_desc.fwnode = dev->fwnode; + retimer_desc.set = ptn36502_retimer_set; + + ptn->retimer = typec_retimer_register(dev, &retimer_desc); + if (IS_ERR(ptn->retimer)) { + ret = dev_err_probe(dev, PTR_ERR(ptn->retimer), + "Failed to register typec retimer\n"); + goto err_switch_unregister; + } + + return 0; + +err_switch_unregister: + typec_switch_unregister(ptn->sw); + +err_disable_regulator: + regulator_disable(ptn->vdd18_supply); + + return ret; +} + +static void ptn36502_remove(struct i2c_client *client) +{ + struct ptn36502 *ptn = i2c_get_clientdata(client); + + typec_retimer_unregister(ptn->retimer); + typec_switch_unregister(ptn->sw); + + regulator_disable(ptn->vdd18_supply); +} + +static const struct i2c_device_id ptn36502_table[] = { + { "ptn36502" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ptn36502_table); + +static const struct of_device_id ptn36502_of_table[] = { + { .compatible = "nxp,ptn36502" }, + { } +}; +MODULE_DEVICE_TABLE(of, ptn36502_of_table); + +static struct i2c_driver ptn36502_driver = { + .driver = { + .name = "ptn36502", + .of_match_table = ptn36502_of_table, + }, + .probe = ptn36502_probe, + .remove = ptn36502_remove, + .id_table = ptn36502_table, +}; +module_i2c_driver(ptn36502_driver); + +MODULE_AUTHOR("Luca Weiss <luca.weiss@fairphone.com>"); +MODULE_DESCRIPTION("NXP PTN36502 Type-C driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/pd.c b/drivers/usb/typec/pd.c index 8cc66e4467c4..85d015cdbe1f 100644 --- a/drivers/usb/typec/pd.c +++ b/drivers/usb/typec/pd.c @@ -83,14 +83,12 @@ unchunked_extended_messages_supported_show(struct device *dev, } static DEVICE_ATTR_RO(unchunked_extended_messages_supported); -/* - * REVISIT: Peak Current requires access also to the RDO. static ssize_t peak_current_show(struct device *dev, struct device_attribute *attr, char *buf) { - ... + return sysfs_emit(buf, "%u\n", (to_pdo(dev)->pdo >> PDO_FIXED_PEAK_CURR_SHIFT) & 3); } -*/ +static DEVICE_ATTR_RO(peak_current); static ssize_t fast_role_swap_current_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -135,7 +133,7 @@ static struct attribute *source_fixed_supply_attrs[] = { &dev_attr_usb_communication_capable.attr, &dev_attr_dual_role_data.attr, &dev_attr_unchunked_extended_messages_supported.attr, - /*&dev_attr_peak_current.attr,*/ + &dev_attr_peak_current.attr, &dev_attr_voltage.attr, &maximum_current_attr.attr, NULL @@ -144,7 +142,7 @@ static struct attribute *source_fixed_supply_attrs[] = { static umode_t fixed_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) { if (to_pdo(kobj_to_dev(kobj))->object_position && - /*attr != &dev_attr_peak_current.attr &&*/ + attr != &dev_attr_peak_current.attr && attr != &dev_attr_voltage.attr && attr != &maximum_current_attr.attr && attr != &operational_current_attr.attr) diff --git a/drivers/usb/typec/port-mapper.c b/drivers/usb/typec/port-mapper.c index a929e000d0e2..d42da5720a25 100644 --- a/drivers/usb/typec/port-mapper.c +++ b/drivers/usb/typec/port-mapper.c @@ -8,17 +8,22 @@ #include <linux/acpi.h> #include <linux/component.h> +#include <linux/usb.h> #include "class.h" static int typec_aggregate_bind(struct device *dev) { - return component_bind_all(dev, NULL); + struct typec_port *port = to_typec_port(dev); + + return component_bind_all(dev, &port->con); } static void typec_aggregate_unbind(struct device *dev) { - component_unbind_all(dev, NULL); + struct typec_port *port = to_typec_port(dev); + + component_unbind_all(dev, &port->con); } static const struct component_master_ops typec_aggregate_ops = { diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c index 17ebc5fb684f..67422d45eb54 100644 --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c @@ -7,6 +7,7 @@ #include <linux/bits.h> #include <linux/kernel.h> +#include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -51,13 +52,19 @@ /* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */ #define BMCIO_RXDZEN BIT(0) +struct rt1711h_chip_info { + u32 rxdz_sel; + u16 did; + bool enable_pd30_extended_message; +}; + struct rt1711h_chip { struct tcpci_data data; struct tcpci *tcpci; struct device *dev; struct regulator *vbus; + const struct rt1711h_chip_info *info; bool src_en; - u16 did; }; static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val) @@ -105,7 +112,7 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) return ret; /* Enable PD30 extended message for RT1715 */ - if (chip->did == RT1715_DID) { + if (chip->info->enable_pd30_extended_message) { ret = regmap_update_bits(regmap, RT1711H_RTCTRL8, RT1711H_ENEXTMSG, RT1711H_ENEXTMSG); if (ret < 0) @@ -200,10 +207,7 @@ static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status) if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) || (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) { rxdz_en = BMCIO_RXDZEN; - if (chip->did == RT1715_DID) - rxdz_sel = RT1711H_BMCIO_RXDZSEL; - else - rxdz_sel = 0; + rxdz_sel = chip->info->rxdz_sel; } else { rxdz_en = 0; rxdz_sel = RT1711H_BMCIO_RXDZSEL; @@ -319,7 +323,7 @@ static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *c ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV); if (ret < 0) return ret; - if (ret != chip->did) { + if (ret != chip->info->did) { dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret); return -ENODEV; } @@ -336,7 +340,7 @@ static int rt1711h_probe(struct i2c_client *client) if (!chip) return -ENOMEM; - chip->did = (size_t)device_get_match_data(&client->dev); + chip->info = i2c_get_match_data(client); ret = rt1711h_check_revision(client, chip); if (ret < 0) { @@ -391,26 +395,34 @@ static void rt1711h_remove(struct i2c_client *client) tcpci_unregister_port(chip->tcpci); } +static const struct rt1711h_chip_info rt1711h = { + .did = RT1711H_DID, +}; + +static const struct rt1711h_chip_info rt1715 = { + .rxdz_sel = RT1711H_BMCIO_RXDZSEL, + .did = RT1715_DID, + .enable_pd30_extended_message = true, +}; + static const struct i2c_device_id rt1711h_id[] = { - { "rt1711h", 0 }, - { "rt1715", 0 }, - { } + { "rt1711h", (kernel_ulong_t)&rt1711h }, + { "rt1715", (kernel_ulong_t)&rt1715 }, + {} }; MODULE_DEVICE_TABLE(i2c, rt1711h_id); -#ifdef CONFIG_OF static const struct of_device_id rt1711h_of_match[] = { - { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID }, - { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID }, - {}, + { .compatible = "richtek,rt1711h", .data = &rt1711h }, + { .compatible = "richtek,rt1715", .data = &rt1715 }, + {} }; MODULE_DEVICE_TABLE(of, rt1711h_of_match); -#endif static struct i2c_driver rt1711h_i2c_driver = { .driver = { .name = "rt1711h", - .of_match_table = of_match_ptr(rt1711h_of_match), + .of_match_table = rt1711h_of_match, }, .probe = rt1711h_probe, .remove = rt1711h_remove, diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index d962f67c95ae..058d5b853b57 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -517,9 +517,9 @@ static const char * const pd_rev[] = { ((cc) == TYPEC_CC_RP_DEF || (cc) == TYPEC_CC_RP_1_5 || \ (cc) == TYPEC_CC_RP_3_0) +/* As long as cc is pulled up, we can consider it as sink. */ #define tcpm_port_is_sink(port) \ - ((tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || \ - (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1))) + (tcpm_cc_is_sink((port)->cc1) || tcpm_cc_is_sink((port)->cc2)) #define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD) #define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA) @@ -1625,6 +1625,9 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev, if (PD_VDO_VID(p[0]) != USB_SID_PD) break; + if (IS_ERR_OR_NULL(port->partner)) + break; + if (PD_VDO_SVDM_VER(p[0]) < svdm_version) { typec_partner_set_svdm_version(port->partner, PD_VDO_SVDM_VER(p[0])); @@ -3903,6 +3906,8 @@ static void run_state_machine(struct tcpm_port *port) port->potential_contaminant = ((port->enter_state == SRC_ATTACH_WAIT && port->state == SRC_UNATTACHED) || (port->enter_state == SNK_ATTACH_WAIT && + port->state == SNK_UNATTACHED) || + (port->enter_state == SNK_DEBOUNCED && port->state == SNK_UNATTACHED)); port->enter_state = port->state; diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 37b56ce75f39..0e867f531d34 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -17,6 +17,7 @@ #include <linux/usb/typec_altmode.h> #include <linux/usb/role.h> #include <linux/workqueue.h> +#include <linux/firmware.h> #include "tps6598x.h" #include "trace.h" @@ -36,13 +37,33 @@ #define TPS_REG_STATUS 0x1a #define TPS_REG_SYSTEM_CONF 0x28 #define TPS_REG_CTRL_CONF 0x29 +#define TPS_REG_BOOT_STATUS 0x2D #define TPS_REG_POWER_STATUS 0x3f +#define TPS_REG_PD_STATUS 0x40 #define TPS_REG_RX_IDENTITY_SOP 0x48 #define TPS_REG_DATA_STATUS 0x5f +#define TPS_REG_SLEEP_CONF 0x70 /* TPS_REG_SYSTEM_CONF bits */ #define TPS_SYSCONF_PORTINFO(c) ((c) & 7) +/* + * BPMs task timeout, recommended 5 seconds + * pg.48 TPS2575 Host Interface Technical Reference + * Manual (Rev. A) + * https://www.ti.com/lit/ug/slvuc05a/slvuc05a.pdf + */ +#define TPS_BUNDLE_TIMEOUT 0x32 + +/* BPMs return code */ +#define TPS_TASK_BPMS_INVALID_BUNDLE_SIZE 0x4 +#define TPS_TASK_BPMS_INVALID_SLAVE_ADDR 0x5 +#define TPS_TASK_BPMS_INVALID_TIMEOUT 0x6 + +/* PBMc data out */ +#define TPS_PBMC_RC 0 /* Return code */ +#define TPS_PBMC_DPCS 2 /* device patch complete status */ + enum { TPS_PORTINFO_SINK, TPS_PORTINFO_SINK_ACCESSORY, @@ -68,6 +89,7 @@ enum { TPS_MODE_BOOT, TPS_MODE_BIST, TPS_MODE_DISC, + TPS_MODE_PTCH, }; static const char *const modes[] = { @@ -75,11 +97,22 @@ static const char *const modes[] = { [TPS_MODE_BOOT] = "BOOT", [TPS_MODE_BIST] = "BIST", [TPS_MODE_DISC] = "DISC", + [TPS_MODE_PTCH] = "PTCH", }; /* Unrecognized commands will be replaced with "!CMD" */ #define INVALID_CMD(_cmd_) (_cmd_ == 0x444d4321) +struct tps6598x; + +struct tipd_data { + irq_handler_t irq_handler; + int (*register_port)(struct tps6598x *tps, struct fwnode_handle *node); + void (*trace_power_status)(u16 status); + void (*trace_status)(u32 status); + int (*apply_patch)(struct tps6598x *tps); +}; + struct tps6598x { struct device *dev; struct regmap *regmap; @@ -97,9 +130,11 @@ struct tps6598x { enum power_supply_usb_type usb_type; int wakeup; + u32 status; /* status reg */ u16 pwr_status; struct delayed_work wq_poll; - irq_handler_t irq_handler; + + const struct tipd_data *data; }; static enum power_supply_property tps6598x_psy_props[] = { @@ -180,6 +215,11 @@ static inline int tps6598x_read64(struct tps6598x *tps, u8 reg, u64 *val) return tps6598x_block_read(tps, reg, val, sizeof(u64)); } +static inline int tps6598x_write8(struct tps6598x *tps, u8 reg, u8 val) +{ + return tps6598x_block_write(tps, reg, &val, sizeof(u8)); +} + static inline int tps6598x_write64(struct tps6598x *tps, u8 reg, u64 val) { return tps6598x_block_write(tps, reg, &val, sizeof(u64)); @@ -282,9 +322,10 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status) power_supply_changed(tps->psy); } -static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, +static int tps6598x_exec_cmd_tmo(struct tps6598x *tps, const char *cmd, size_t in_len, u8 *in_data, - size_t out_len, u8 *out_data) + size_t out_len, u8 *out_data, + u32 cmd_timeout_ms, u32 res_delay_ms) { unsigned long timeout; u32 val; @@ -307,8 +348,7 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, if (ret < 0) return ret; - /* XXX: Using 1s for now, but it may not be enough for every command. */ - timeout = jiffies + msecs_to_jiffies(1000); + timeout = jiffies + msecs_to_jiffies(cmd_timeout_ms); do { ret = tps6598x_read32(tps, TPS_REG_CMD1, &val); @@ -321,6 +361,9 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, return -ETIMEDOUT; } while (val); + /* some commands require delay for the result to be available */ + mdelay(res_delay_ms); + if (out_len) { ret = tps6598x_block_read(tps, TPS_REG_DATA1, out_data, out_len); @@ -345,6 +388,14 @@ static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, return 0; } +static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd, + size_t in_len, u8 *in_data, + size_t out_len, u8 *out_data) +{ + return tps6598x_exec_cmd_tmo(tps, cmd, in_len, in_data, + out_len, out_data, 1000, 0); +} + static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role) { const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF"; @@ -419,7 +470,9 @@ static bool tps6598x_read_status(struct tps6598x *tps, u32 *status) dev_err(tps->dev, "%s: failed to read status\n", __func__); return false; } - trace_tps6598x_status(*status); + + if (tps->data->trace_status) + tps->data->trace_status(*status); return true; } @@ -450,7 +503,9 @@ static bool tps6598x_read_power_status(struct tps6598x *tps) return false; } tps->pwr_status = pwr_status; - trace_tps6598x_power_status(pwr_status); + + if (tps->data->trace_power_status) + tps->data->trace_power_status(pwr_status); return true; } @@ -513,6 +568,65 @@ err_unlock: return IRQ_NONE; } +static bool tps6598x_has_role_changed(struct tps6598x *tps, u32 status) +{ + status ^= tps->status; + + return status & (TPS_STATUS_PORTROLE | TPS_STATUS_DATAROLE); +} + +static irqreturn_t tps25750_interrupt(int irq, void *data) +{ + struct tps6598x *tps = data; + u64 event[2] = { }; + u32 status; + int ret; + + mutex_lock(&tps->lock); + + ret = tps6598x_block_read(tps, TPS_REG_INT_EVENT1, event, 11); + if (ret) { + dev_err(tps->dev, "%s: failed to read events\n", __func__); + goto err_unlock; + } + trace_tps25750_irq(event[0]); + + if (!(event[0] | event[1])) + goto err_unlock; + + if (!tps6598x_read_status(tps, &status)) + goto err_clear_ints; + + if ((event[0] | event[1]) & TPS_REG_INT_POWER_STATUS_UPDATE) + if (!tps6598x_read_power_status(tps)) + goto err_clear_ints; + + if ((event[0] | event[1]) & TPS_REG_INT_DATA_STATUS_UPDATE) + if (!tps6598x_read_data_status(tps)) + goto err_clear_ints; + + /* + * data/port roles could be updated independently after + * a plug event. Therefore, we need to check + * for pr/dr status change to set TypeC dr/pr accordingly. + */ + if ((event[0] | event[1]) & TPS_REG_INT_PLUG_EVENT || + tps6598x_has_role_changed(tps, status)) + tps6598x_handle_plug_event(tps, status); + + tps->status = status; + +err_clear_ints: + tps6598x_block_write(tps, TPS_REG_INT_CLEAR1, event, 11); + +err_unlock: + mutex_unlock(&tps->lock); + + if (event[0] | event[1]) + return IRQ_HANDLED; + return IRQ_NONE; +} + static irqreturn_t tps6598x_interrupt(int irq, void *data) { struct tps6598x *tps = data; @@ -568,7 +682,7 @@ static void tps6598x_poll_work(struct work_struct *work) struct tps6598x *tps = container_of(to_delayed_work(work), struct tps6598x, wq_poll); - tps->irq_handler(0, tps); + tps->data->irq_handler(0, tps); queue_delayed_work(system_power_efficient_wq, &tps->wq_poll, msecs_to_jiffies(POLL_INTERVAL)); } @@ -582,12 +696,15 @@ static int tps6598x_check_mode(struct tps6598x *tps) if (ret) return ret; - switch (match_string(modes, ARRAY_SIZE(modes), mode)) { + ret = match_string(modes, ARRAY_SIZE(modes), mode); + + switch (ret) { case TPS_MODE_APP: - return 0; + case TPS_MODE_PTCH: + return ret; case TPS_MODE_BOOT: dev_warn(tps->dev, "dead-battery condition\n"); - return 0; + return ret; case TPS_MODE_BIST: case TPS_MODE_DISC: default: @@ -697,18 +814,374 @@ static int devm_tps6598_psy_register(struct tps6598x *tps) return PTR_ERR_OR_ZERO(tps->psy); } +static int +tps6598x_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode) +{ + int ret; + u32 conf; + struct typec_capability typec_cap = { }; + + ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf); + if (ret) + return ret; + + typec_cap.revision = USB_TYPEC_REV_1_2; + typec_cap.pd_revision = 0x200; + typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + typec_cap.driver_data = tps; + typec_cap.ops = &tps6598x_ops; + typec_cap.fwnode = fwnode; + + switch (TPS_SYSCONF_PORTINFO(conf)) { + case TPS_PORTINFO_SINK_ACCESSORY: + case TPS_PORTINFO_SINK: + typec_cap.type = TYPEC_PORT_SNK; + typec_cap.data = TYPEC_PORT_UFP; + break; + case TPS_PORTINFO_DRP_UFP_DRD: + case TPS_PORTINFO_DRP_DFP_DRD: + typec_cap.type = TYPEC_PORT_DRP; + typec_cap.data = TYPEC_PORT_DRD; + break; + case TPS_PORTINFO_DRP_UFP: + typec_cap.type = TYPEC_PORT_DRP; + typec_cap.data = TYPEC_PORT_UFP; + break; + case TPS_PORTINFO_DRP_DFP: + typec_cap.type = TYPEC_PORT_DRP; + typec_cap.data = TYPEC_PORT_DFP; + break; + case TPS_PORTINFO_SOURCE: + typec_cap.type = TYPEC_PORT_SRC; + typec_cap.data = TYPEC_PORT_DFP; + break; + default: + return -ENODEV; + } + + tps->port = typec_register_port(tps->dev, &typec_cap); + if (IS_ERR(tps->port)) + return PTR_ERR(tps->port); + + return 0; +} + +static int +tps25750_write_firmware(struct tps6598x *tps, + u8 bpms_addr, const u8 *data, size_t len) +{ + struct i2c_client *client = to_i2c_client(tps->dev); + int ret; + u8 slave_addr; + int timeout; + + slave_addr = client->addr; + timeout = client->adapter->timeout; + + /* + * binary configuration size is around ~16Kbytes + * which might take some time to finish writing it + */ + client->adapter->timeout = msecs_to_jiffies(5000); + client->addr = bpms_addr; + + ret = regmap_raw_write(tps->regmap, data[0], &data[1], len - 1); + + client->addr = slave_addr; + client->adapter->timeout = timeout; + + return ret; +} + +static int +tps25750_exec_pbms(struct tps6598x *tps, u8 *in_data, size_t in_len) +{ + int ret; + u8 rc; + + ret = tps6598x_exec_cmd_tmo(tps, "PBMs", in_len, in_data, + sizeof(rc), &rc, 4000, 0); + if (ret) + return ret; + + switch (rc) { + case TPS_TASK_BPMS_INVALID_BUNDLE_SIZE: + dev_err(tps->dev, "%s: invalid fw size\n", __func__); + return -EINVAL; + case TPS_TASK_BPMS_INVALID_SLAVE_ADDR: + dev_err(tps->dev, "%s: invalid slave address\n", __func__); + return -EINVAL; + case TPS_TASK_BPMS_INVALID_TIMEOUT: + dev_err(tps->dev, "%s: timed out\n", __func__); + return -ETIMEDOUT; + default: + break; + } + + return 0; +} + +static int tps25750_abort_patch_process(struct tps6598x *tps) +{ + int ret; + + ret = tps6598x_exec_cmd(tps, "PBMe", 0, NULL, 0, NULL); + if (ret) + return ret; + + ret = tps6598x_check_mode(tps); + if (ret != TPS_MODE_PTCH) + dev_err(tps->dev, "failed to switch to \"PTCH\" mode\n"); + + return ret; +} + +static int tps25750_start_patch_burst_mode(struct tps6598x *tps) +{ + int ret; + const struct firmware *fw; + const char *firmware_name; + struct { + u32 fw_size; + u8 addr; + u8 timeout; + } __packed bpms_data; + u32 addr; + struct device_node *np = tps->dev->of_node; + + ret = device_property_read_string(tps->dev, "firmware-name", + &firmware_name); + if (ret) + return ret; + + ret = request_firmware(&fw, firmware_name, tps->dev); + if (ret) { + dev_err(tps->dev, "failed to retrieve \"%s\"\n", firmware_name); + return ret; + } + + if (fw->size == 0) { + ret = -EINVAL; + goto release_fw; + } + + ret = of_property_match_string(np, "reg-names", "patch-address"); + if (ret < 0) { + dev_err(tps->dev, "failed to get patch-address %d\n", ret); + return ret; + } + + ret = of_property_read_u32_index(np, "reg", ret, &addr); + if (ret) + return ret; + + if (addr == 0 || (addr >= 0x20 && addr <= 0x23)) { + dev_err(tps->dev, "wrong patch address %u\n", addr); + return -EINVAL; + } + + bpms_data.addr = (u8)addr; + bpms_data.fw_size = fw->size; + bpms_data.timeout = TPS_BUNDLE_TIMEOUT; + + ret = tps25750_exec_pbms(tps, (u8 *)&bpms_data, sizeof(bpms_data)); + if (ret) + goto release_fw; + + ret = tps25750_write_firmware(tps, bpms_data.addr, fw->data, fw->size); + if (ret) { + dev_err(tps->dev, "Failed to write patch %s of %zu bytes\n", + firmware_name, fw->size); + goto release_fw; + } + + /* + * A delay of 500us is required after the firmware is written + * based on pg.62 in tps6598x Host Interface Technical + * Reference Manual + * https://www.ti.com/lit/ug/slvuc05a/slvuc05a.pdf + */ + udelay(500); + +release_fw: + release_firmware(fw); + + return ret; +} + +static int tps25750_complete_patch_process(struct tps6598x *tps) +{ + int ret; + u8 out_data[40]; + u8 dummy[2] = { }; + + /* + * Without writing something to DATA_IN, this command would + * return an error + */ + ret = tps6598x_exec_cmd_tmo(tps, "PBMc", sizeof(dummy), dummy, + sizeof(out_data), out_data, 2000, 20); + if (ret) + return ret; + + if (out_data[TPS_PBMC_RC]) { + dev_err(tps->dev, + "%s: pbmc failed: %u\n", __func__, + out_data[TPS_PBMC_RC]); + return -EIO; + } + + if (out_data[TPS_PBMC_DPCS]) { + dev_err(tps->dev, + "%s: failed device patch complete status: %u\n", + __func__, out_data[TPS_PBMC_DPCS]); + return -EIO; + } + + return 0; +} + +static int tps25750_apply_patch(struct tps6598x *tps) +{ + int ret; + unsigned long timeout; + u64 status = 0; + + ret = tps6598x_block_read(tps, TPS_REG_BOOT_STATUS, &status, 5); + if (ret) + return ret; + /* + * Nothing to be done if the configuration + * is being loaded from EERPOM + */ + if (status & TPS_BOOT_STATUS_I2C_EEPROM_PRESENT) + goto wait_for_app; + + ret = tps25750_start_patch_burst_mode(tps); + if (ret) { + tps25750_abort_patch_process(tps); + return ret; + } + + ret = tps25750_complete_patch_process(tps); + if (ret) + return ret; + +wait_for_app: + timeout = jiffies + msecs_to_jiffies(1000); + + do { + ret = tps6598x_check_mode(tps); + if (ret < 0) + return ret; + + if (time_is_before_jiffies(timeout)) + return -ETIMEDOUT; + + } while (ret != TPS_MODE_APP); + + /* + * The dead battery flag may be triggered when the controller + * port is connected to a device that can source power and + * attempts to power up both the controller and the board it is on. + * To restore controller functionality, it is necessary to clear + * this flag + */ + if (status & TPS_BOOT_STATUS_DEAD_BATTERY_FLAG) { + ret = tps6598x_exec_cmd(tps, "DBfg", 0, NULL, 0, NULL); + if (ret) { + dev_err(tps->dev, "failed to clear dead battery %d\n", ret); + return ret; + } + } + + dev_info(tps->dev, "controller switched to \"APP\" mode\n"); + + return 0; +}; + +static int tps25750_init(struct tps6598x *tps) +{ + int ret; + + ret = tps->data->apply_patch(tps); + if (ret) + return ret; + + ret = tps6598x_write8(tps, TPS_REG_SLEEP_CONF, + TPS_SLEEP_CONF_SLEEP_MODE_ALLOWED); + if (ret) + dev_warn(tps->dev, + "%s: failed to enable sleep mode: %d\n", + __func__, ret); + + return 0; +} + +static int +tps25750_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode) +{ + struct typec_capability typec_cap = { }; + const char *data_role; + u8 pd_status; + int ret; + + ret = tps6598x_read8(tps, TPS_REG_PD_STATUS, &pd_status); + if (ret) + return ret; + + ret = fwnode_property_read_string(fwnode, "data-role", &data_role); + if (ret) { + dev_err(tps->dev, "data-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_port_data_role(data_role); + if (ret < 0) { + dev_err(tps->dev, "unknown data-role: %s\n", data_role); + return ret; + } + + typec_cap.data = ret; + typec_cap.revision = USB_TYPEC_REV_1_3; + typec_cap.pd_revision = 0x300; + typec_cap.driver_data = tps; + typec_cap.ops = &tps6598x_ops; + typec_cap.fwnode = fwnode; + typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + + switch (TPS_PD_STATUS_PORT_TYPE(pd_status)) { + case TPS_PD_STATUS_PORT_TYPE_SINK_SOURCE: + case TPS_PD_STATUS_PORT_TYPE_SOURCE_SINK: + typec_cap.type = TYPEC_PORT_DRP; + break; + case TPS_PD_STATUS_PORT_TYPE_SINK: + typec_cap.type = TYPEC_PORT_SNK; + break; + case TPS_PD_STATUS_PORT_TYPE_SOURCE: + typec_cap.type = TYPEC_PORT_SRC; + break; + default: + return -ENODEV; + } + + tps->port = typec_register_port(tps->dev, &typec_cap); + if (IS_ERR(tps->port)) + return PTR_ERR(tps->port); + + return 0; +} + static int tps6598x_probe(struct i2c_client *client) { - irq_handler_t irq_handler = tps6598x_interrupt; struct device_node *np = client->dev.of_node; - struct typec_capability typec_cap = { }; struct tps6598x *tps; struct fwnode_handle *fwnode; u32 status; - u32 conf; u32 vid; int ret; u64 mask1; + bool is_tps25750; tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); if (!tps) @@ -721,9 +1194,12 @@ static int tps6598x_probe(struct i2c_client *client) if (IS_ERR(tps->regmap)) return PTR_ERR(tps->regmap); - ret = tps6598x_read32(tps, TPS_REG_VID, &vid); - if (ret < 0 || !vid) - return -ENODEV; + is_tps25750 = device_is_compatible(tps->dev, "ti,tps25750"); + if (!is_tps25750) { + ret = tps6598x_read32(tps, TPS_REG_VID, &vid); + if (ret < 0 || !vid) + return -ENODEV; + } /* * Checking can the adapter handle SMBus protocol. If it can not, the @@ -743,7 +1219,6 @@ static int tps6598x_probe(struct i2c_client *client) APPLE_CD_REG_INT_DATA_STATUS_UPDATE | APPLE_CD_REG_INT_PLUG_EVENT; - irq_handler = cd321x_interrupt; } else { /* Enable power status, data status and plug event interrupts */ mask1 = TPS_REG_INT_POWER_STATUS_UPDATE | @@ -751,24 +1226,29 @@ static int tps6598x_probe(struct i2c_client *client) TPS_REG_INT_PLUG_EVENT; } - tps->irq_handler = irq_handler; + tps->data = device_get_match_data(tps->dev); + if (!tps->data) + return -EINVAL; + /* Make sure the controller has application firmware running */ ret = tps6598x_check_mode(tps); - if (ret) + if (ret < 0) return ret; + if (is_tps25750 && ret == TPS_MODE_PTCH) { + ret = tps25750_init(tps); + if (ret) + return ret; + } + ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, mask1); if (ret) - return ret; - - ret = tps6598x_read32(tps, TPS_REG_STATUS, &status); - if (ret < 0) - goto err_clear_mask; - trace_tps6598x_status(status); + goto err_reset_controller; - ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf); - if (ret < 0) + if (!tps6598x_read_status(tps, &status)) { + ret = -ENODEV; goto err_clear_mask; + } /* * This fwnode has a "compatible" property, but is never populated as a @@ -787,50 +1267,13 @@ static int tps6598x_probe(struct i2c_client *client) goto err_fwnode_put; } - typec_cap.revision = USB_TYPEC_REV_1_2; - typec_cap.pd_revision = 0x200; - typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; - typec_cap.driver_data = tps; - typec_cap.ops = &tps6598x_ops; - typec_cap.fwnode = fwnode; - - switch (TPS_SYSCONF_PORTINFO(conf)) { - case TPS_PORTINFO_SINK_ACCESSORY: - case TPS_PORTINFO_SINK: - typec_cap.type = TYPEC_PORT_SNK; - typec_cap.data = TYPEC_PORT_UFP; - break; - case TPS_PORTINFO_DRP_UFP_DRD: - case TPS_PORTINFO_DRP_DFP_DRD: - typec_cap.type = TYPEC_PORT_DRP; - typec_cap.data = TYPEC_PORT_DRD; - break; - case TPS_PORTINFO_DRP_UFP: - typec_cap.type = TYPEC_PORT_DRP; - typec_cap.data = TYPEC_PORT_UFP; - break; - case TPS_PORTINFO_DRP_DFP: - typec_cap.type = TYPEC_PORT_DRP; - typec_cap.data = TYPEC_PORT_DFP; - break; - case TPS_PORTINFO_SOURCE: - typec_cap.type = TYPEC_PORT_SRC; - typec_cap.data = TYPEC_PORT_DFP; - break; - default: - ret = -ENODEV; - goto err_role_put; - } - ret = devm_tps6598_psy_register(tps); if (ret) goto err_role_put; - tps->port = typec_register_port(&client->dev, &typec_cap); - if (IS_ERR(tps->port)) { - ret = PTR_ERR(tps->port); + ret = tps->data->register_port(tps, fwnode); + if (ret) goto err_role_put; - } if (status & TPS_STATUS_PLUG_PRESENT) { ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &tps->pwr_status); @@ -845,7 +1288,7 @@ static int tps6598x_probe(struct i2c_client *client) if (client->irq) { ret = devm_request_threaded_irq(&client->dev, client->irq, NULL, - irq_handler, + tps->data->irq_handler, IRQF_SHARED | IRQF_ONESHOT, dev_name(&client->dev), tps); } else { @@ -879,6 +1322,10 @@ err_fwnode_put: fwnode_handle_put(fwnode); err_clear_mask: tps6598x_write64(tps, TPS_REG_INT_MASK1, 0); +err_reset_controller: + /* Reset PD controller to remove any applied patch */ + if (is_tps25750) + tps6598x_exec_cmd_tmo(tps, "GAID", 0, NULL, 0, NULL, 2000, 0); return ret; } @@ -889,9 +1336,14 @@ static void tps6598x_remove(struct i2c_client *client) if (!client->irq) cancel_delayed_work_sync(&tps->wq_poll); + devm_free_irq(tps->dev, client->irq, tps); tps6598x_disconnect(tps, 0); typec_unregister_port(tps->port); usb_role_switch_put(tps->role_sw); + + /* Reset PD controller to remove any applied patch */ + if (device_is_compatible(tps->dev, "ti,tps25750")) + tps6598x_exec_cmd_tmo(tps, "GAID", 0, NULL, 0, NULL, 2000, 0); } static int __maybe_unused tps6598x_suspend(struct device *dev) @@ -914,6 +1366,17 @@ static int __maybe_unused tps6598x_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct tps6598x *tps = i2c_get_clientdata(client); + int ret; + + ret = tps6598x_check_mode(tps); + if (ret < 0) + return ret; + + if (device_is_compatible(tps->dev, "ti,tps25750") && ret == TPS_MODE_PTCH) { + ret = tps25750_init(tps); + if (ret) + return ret; + } if (tps->wakeup) { disable_irq_wake(client->irq); @@ -931,9 +1394,32 @@ static const struct dev_pm_ops tps6598x_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(tps6598x_suspend, tps6598x_resume) }; +static const struct tipd_data cd321x_data = { + .irq_handler = cd321x_interrupt, + .register_port = tps6598x_register_port, + .trace_power_status = trace_tps6598x_power_status, + .trace_status = trace_tps6598x_status, +}; + +static const struct tipd_data tps6598x_data = { + .irq_handler = tps6598x_interrupt, + .register_port = tps6598x_register_port, + .trace_power_status = trace_tps6598x_power_status, + .trace_status = trace_tps6598x_status, +}; + +static const struct tipd_data tps25750_data = { + .irq_handler = tps25750_interrupt, + .register_port = tps25750_register_port, + .trace_power_status = trace_tps25750_power_status, + .trace_status = trace_tps25750_status, + .apply_patch = tps25750_apply_patch, +}; + static const struct of_device_id tps6598x_of_match[] = { - { .compatible = "ti,tps6598x", }, - { .compatible = "apple,cd321x", }, + { .compatible = "ti,tps6598x", &tps6598x_data}, + { .compatible = "apple,cd321x", &cd321x_data}, + { .compatible = "ti,tps25750", &tps25750_data}, {} }; MODULE_DEVICE_TABLE(of, tps6598x_of_match); diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h index 527857549d69..01609bf509e4 100644 --- a/drivers/usb/typec/tipd/tps6598x.h +++ b/drivers/usb/typec/tipd/tps6598x.h @@ -161,6 +161,25 @@ #define TPS_POWER_STATUS_BC12_STATUS_CDP 2 #define TPS_POWER_STATUS_BC12_STATUS_DCP 3 +/* TPS25750_REG_POWER_STATUS bits */ +#define TPS25750_POWER_STATUS_CHARGER_DETECT_STATUS_MASK GENMASK(7, 4) +#define TPS25750_POWER_STATUS_CHARGER_DETECT_STATUS(p) \ + TPS_FIELD_GET(TPS25750_POWER_STATUS_CHARGER_DETECT_STATUS_MASK, (p)) +#define TPS25750_POWER_STATUS_CHARGER_ADVERTISE_STATUS_MASK GENMASK(9, 8) +#define TPS25750_POWER_STATUS_CHARGER_ADVERTISE_STATUS(p) \ + TPS_FIELD_GET(TPS25750_POWER_STATUS_CHARGER_ADVERTISE_STATUS_MASK, (p)) + +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DISABLED 0 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_IN_PROGRESS 1 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_NONE 2 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_SPD 3 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_BC_1_2_CPD 4 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_BC_1_2_DPD 5 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DIV_1_DCP 6 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DIV_2_DCP 7 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DIV_3_DCP 8 +#define TPS25750_POWER_STATUS_CHARGER_DET_STATUS_1_2V_DCP 9 + /* TPS_REG_DATA_STATUS bits */ #define TPS_DATA_STATUS_DATA_CONNECTION BIT(0) #define TPS_DATA_STATUS_UPSIDE_DOWN BIT(1) @@ -199,4 +218,21 @@ #define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_A BIT(2) #define TPS_DATA_STATUS_DP_SPEC_PIN_ASSIGNMENT_B (BIT(2) | BIT(1)) +/* BOOT STATUS REG*/ +#define TPS_BOOT_STATUS_DEAD_BATTERY_FLAG BIT(2) +#define TPS_BOOT_STATUS_I2C_EEPROM_PRESENT BIT(3) + +/* PD STATUS REG */ +#define TPS_REG_PD_STATUS_PORT_TYPE_MASK GENMASK(5, 4) +#define TPS_PD_STATUS_PORT_TYPE(x) \ + TPS_FIELD_GET(TPS_REG_PD_STATUS_PORT_TYPE_MASK, x) + +#define TPS_PD_STATUS_PORT_TYPE_SINK_SOURCE 0 +#define TPS_PD_STATUS_PORT_TYPE_SINK 1 +#define TPS_PD_STATUS_PORT_TYPE_SOURCE 2 +#define TPS_PD_STATUS_PORT_TYPE_SOURCE_SINK 3 + +/* SLEEP CONF REG */ +#define TPS_SLEEP_CONF_SLEEP_MODE_ALLOWED BIT(0) + #endif /* __TPS6598X_H__ */ diff --git a/drivers/usb/typec/tipd/trace.h b/drivers/usb/typec/tipd/trace.h index 12cad1bde7cc..0669cca12ea1 100644 --- a/drivers/usb/typec/tipd/trace.h +++ b/drivers/usb/typec/tipd/trace.h @@ -74,6 +74,13 @@ { APPLE_CD_REG_INT_DATA_STATUS_UPDATE, "DATA_STATUS_UPDATE" }, \ { APPLE_CD_REG_INT_STATUS_UPDATE, "STATUS_UPDATE" }) +#define show_tps25750_irq_flags(flags) \ + __print_flags_u64(flags, "|", \ + { TPS_REG_INT_PLUG_EVENT, "PLUG_EVENT" }, \ + { TPS_REG_INT_POWER_STATUS_UPDATE, "POWER_STATUS_UPDATE" }, \ + { TPS_REG_INT_STATUS_UPDATE, "STATUS_UPDATE" }, \ + { TPS_REG_INT_PD_STATUS_UPDATE, "PD_STATUS_UPDATE" }) + #define TPS6598X_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_STATUS_CONN_STATE_MASK | \ TPS_STATUS_PP_5V0_SWITCH_MASK | \ TPS_STATUS_PP_HV_SWITCH_MASK | \ @@ -84,6 +91,14 @@ TPS_STATUS_USB_HOST_PRESENT_MASK | \ TPS_STATUS_LEGACY_MASK)) +#define TPS25750_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_STATUS_CONN_STATE_MASK | \ + GENMASK(19, 7) | \ + TPS_STATUS_VBUS_STATUS_MASK | \ + TPS_STATUS_USB_HOST_PRESENT_MASK | \ + TPS_STATUS_LEGACY_MASK | \ + BIT(26) | \ + GENMASK(31, 28))) + #define show_status_conn_state(status) \ __print_symbolic(TPS_STATUS_CONN_STATE((status)), \ { TPS_STATUS_CONN_STATE_CONN_WITH_R_A, "conn-Ra" }, \ @@ -141,6 +156,14 @@ { TPS_STATUS_HIGH_VOLAGE_WARNING, "HIGH_VOLAGE_WARNING" }, \ { TPS_STATUS_HIGH_LOW_VOLTAGE_WARNING, "HIGH_LOW_VOLTAGE_WARNING" }) +#define show_tps25750_status_flags(flags) \ + __print_flags((flags & TPS25750_STATUS_FLAGS_MASK), "|", \ + { TPS_STATUS_PLUG_PRESENT, "PLUG_PRESENT" }, \ + { TPS_STATUS_PLUG_UPSIDE_DOWN, "UPSIDE_DOWN" }, \ + { TPS_STATUS_PORTROLE, "PORTROLE" }, \ + { TPS_STATUS_DATAROLE, "DATAROLE" }, \ + { TPS_STATUS_BIST, "BIST" }) + #define show_power_status_source_sink(power_status) \ __print_symbolic(TPS_POWER_STATUS_SOURCESINK(power_status), \ { 1, "sink" }, \ @@ -159,6 +182,19 @@ { TPS_POWER_STATUS_BC12_STATUS_CDP, "cdp" }, \ { TPS_POWER_STATUS_BC12_STATUS_SDP, "sdp" }) +#define show_tps25750_power_status_charger_detect_status(power_status) \ + __print_symbolic(TPS25750_POWER_STATUS_CHARGER_DETECT_STATUS(power_status), \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DISABLED, "disabled"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_IN_PROGRESS, "in progress"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_NONE, "none"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_SPD, "spd"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_BC_1_2_CPD, "cpd"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_BC_1_2_DPD, "dpd"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DIV_1_DCP, "divider 1 dcp"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DIV_2_DCP, "divider 2 dcp"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_DIV_3_DCP, "divider 3 dpc"}, \ + { TPS25750_POWER_STATUS_CHARGER_DET_STATUS_1_2V_DCP, "1.2V dpc"}) + #define TPS_DATA_STATUS_FLAGS_MASK (GENMASK(31, 0) ^ (TPS_DATA_STATUS_DP_PIN_ASSIGNMENT_MASK | \ TPS_DATA_STATUS_TBT_CABLE_SPEED_MASK | \ TPS_DATA_STATUS_TBT_CABLE_GEN_MASK)) @@ -230,6 +266,21 @@ TRACE_EVENT(cd321x_irq, show_cd321x_irq_flags(__entry->event)) ); +TRACE_EVENT(tps25750_irq, + TP_PROTO(u64 event), + TP_ARGS(event), + + TP_STRUCT__entry( + __field(u64, event) + ), + + TP_fast_assign( + __entry->event = event; + ), + + TP_printk("event=%s", show_tps25750_irq_flags(__entry->event)) +); + TRACE_EVENT(tps6598x_status, TP_PROTO(u32 status), TP_ARGS(status), @@ -257,6 +308,27 @@ TRACE_EVENT(tps6598x_status, ) ); +TRACE_EVENT(tps25750_status, + TP_PROTO(u32 status), + TP_ARGS(status), + + TP_STRUCT__entry( + __field(u32, status) + ), + + TP_fast_assign( + __entry->status = status; + ), + + TP_printk("conn: %s, vbus: %s, usb-host: %s, legacy: %s, flags: %s", + show_status_conn_state(__entry->status), + show_status_vbus_status(__entry->status), + show_status_usb_host_present(__entry->status), + show_status_legacy(__entry->status), + show_tps25750_status_flags(__entry->status) + ) +); + TRACE_EVENT(tps6598x_power_status, TP_PROTO(u16 power_status), TP_ARGS(power_status), @@ -277,6 +349,26 @@ TRACE_EVENT(tps6598x_power_status, ) ); +TRACE_EVENT(tps25750_power_status, + TP_PROTO(u16 power_status), + TP_ARGS(power_status), + + TP_STRUCT__entry( + __field(u16, power_status) + ), + + TP_fast_assign( + __entry->power_status = power_status; + ), + + TP_printk("conn: %d, pwr-role: %s, typec: %s, charger detect: %s", + !!TPS_POWER_STATUS_CONNECTION(__entry->power_status), + show_power_status_source_sink(__entry->power_status), + show_power_status_typec_status(__entry->power_status), + show_tps25750_power_status_charger_detect_status(__entry->power_status) + ) +); + TRACE_EVENT(tps6598x_data_status, TP_PROTO(u32 data_status), TP_ARGS(data_status), diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c index 73cd5bf35047..d9d3c91125ca 100644 --- a/drivers/usb/typec/ucsi/displayport.c +++ b/drivers/usb/typec/ucsi/displayport.c @@ -315,7 +315,7 @@ struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con, struct ucsi_dp *dp; /* We can't rely on the firmware with the capabilities. */ - desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE; + desc->vdo |= DP_CAP_DP_SIGNALLING(0) | DP_CAP_RECEPTACLE; /* Claiming that we support all pin assignments */ desc->vdo |= all_assignments << 8; diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 607061a37eca..449c125f6f87 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -501,8 +501,8 @@ static void ucsi_ccg_nvidia_altmode(struct ucsi_ccg *uc, case NVIDIA_FTB_DP_OFFSET: if (alt[0].mid == USB_TYPEC_NVIDIA_VLINK_DBG_VDO) alt[0].mid = USB_TYPEC_NVIDIA_VLINK_DP_VDO | - DP_CAP_DP_SIGNALING | DP_CAP_USB | - DP_CONF_SET_PIN_ASSIGN(BIT(DP_PIN_ASSIGN_E)); + DP_CAP_DP_SIGNALLING(0) | DP_CAP_USB | + DP_CONF_SET_PIN_ASSIGN(BIT(DP_PIN_ASSIGN_E)); break; case NVIDIA_FTB_DBG_OFFSET: if (alt[0].mid == USB_TYPEC_NVIDIA_VLINK_DP_VDO) diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index bb1854b3311d..db6e248f8208 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -8,9 +8,13 @@ #include <linux/mutex.h> #include <linux/property.h> #include <linux/soc/qcom/pdr.h> +#include <linux/usb/typec_mux.h> +#include <linux/gpio/consumer.h> #include <linux/soc/qcom/pmic_glink.h> #include "ucsi.h" +#define PMIC_GLINK_MAX_PORTS 2 + #define UCSI_BUF_SIZE 48 #define MSG_TYPE_REQ_RESP 1 @@ -52,6 +56,9 @@ struct ucsi_notify_ind_msg { struct pmic_glink_ucsi { struct device *dev; + struct gpio_desc *port_orientation[PMIC_GLINK_MAX_PORTS]; + struct typec_switch *port_switch[PMIC_GLINK_MAX_PORTS]; + struct pmic_glink_client *client; struct ucsi *ucsi; @@ -220,8 +227,20 @@ static void pmic_glink_ucsi_notify(struct work_struct *work) } con_num = UCSI_CCI_CONNECTOR(cci); - if (con_num) + if (con_num) { + if (con_num < PMIC_GLINK_MAX_PORTS && + ucsi->port_orientation[con_num - 1]) { + int orientation = gpiod_get_value(ucsi->port_orientation[con_num - 1]); + + if (orientation >= 0) { + typec_switch_set(ucsi->port_switch[con_num - 1], + orientation ? TYPEC_ORIENTATION_REVERSE + : TYPEC_ORIENTATION_NORMAL); + } + } + ucsi_connector_change(ucsi->ucsi, con_num); + } if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) { ucsi->sync_val = -EBUSY; @@ -282,6 +301,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, { struct pmic_glink_ucsi *ucsi; struct device *dev = &adev->dev; + struct fwnode_handle *fwnode; int ret; ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL); @@ -309,6 +329,38 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, ucsi_set_drvdata(ucsi->ucsi, ucsi); + device_for_each_child_node(dev, fwnode) { + struct gpio_desc *desc; + u32 port; + + ret = fwnode_property_read_u32(fwnode, "reg", &port); + if (ret < 0) { + dev_err(dev, "missing reg property of %pOFn\n", fwnode); + return ret; + } + + if (port >= PMIC_GLINK_MAX_PORTS) { + dev_warn(dev, "invalid connector number, ignoring\n"); + continue; + } + + desc = devm_gpiod_get_index_optional(&adev->dev, "orientation", port, GPIOD_IN); + + /* If GPIO isn't found, continue */ + if (!desc) + continue; + + if (IS_ERR(desc)) + return dev_err_probe(dev, PTR_ERR(desc), + "unable to acquire orientation gpio\n"); + ucsi->port_orientation[port] = desc; + + ucsi->port_switch[port] = fwnode_typec_switch_get(fwnode); + if (IS_ERR(ucsi->port_switch[port])) + return dev_err_probe(dev, PTR_ERR(ucsi->port_switch[port]), + "failed to acquire orientation-switch\n"); + } + ucsi->client = devm_pmic_glink_register_client(dev, PMIC_GLINK_OWNER_USBC, pmic_glink_ucsi_callback, diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index 9c6954aad6c8..ce625b1ce9a5 100644 --- a/drivers/usb/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -464,8 +464,13 @@ static void stub_disconnect(struct usb_device *udev) /* release port */ rc = usb_hub_release_port(udev->parent, udev->portnum, (struct usb_dev_state *) udev); - if (rc) { - dev_dbg(&udev->dev, "unable to release port\n"); + /* + * NOTE: If a HUB disconnect triggered disconnect of the down stream + * device usb_hub_release_port will return -ENODEV so we can safely ignore + * that error here. + */ + if (rc && (rc != -ENODEV)) { + dev_dbg(&udev->dev, "unable to release port (%i)\n", rc); return; } diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 37d1fc34e8a5..82650c11e451 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -1140,6 +1140,7 @@ static int hcd_name_to_id(const char *name) static int vhci_setup(struct usb_hcd *hcd) { struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); + if (usb_hcd_is_primary_hcd(hcd)) { vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd); vhci->vhci_hcd_hs->vhci = vhci; @@ -1493,13 +1494,10 @@ static struct platform_driver vhci_driver = { static void del_platform_devices(void) { - struct platform_device *pdev; int i; for (i = 0; i < vhci_num_controllers; i++) { - pdev = vhcis[i].pdev; - if (pdev != NULL) - platform_device_unregister(pdev); + platform_device_unregister(vhcis[i].pdev); vhcis[i].pdev = NULL; } sysfs_remove_link(&platform_bus.kobj, driver_name); @@ -1519,45 +1517,33 @@ static int __init vhci_hcd_init(void) if (vhcis == NULL) return -ENOMEM; - for (i = 0; i < vhci_num_controllers; i++) { - vhcis[i].pdev = platform_device_alloc(driver_name, i); - if (!vhcis[i].pdev) { - i--; - while (i >= 0) - platform_device_put(vhcis[i--].pdev); - ret = -ENOMEM; - goto err_device_alloc; - } - } - for (i = 0; i < vhci_num_controllers; i++) { - void *vhci = &vhcis[i]; - ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *)); - if (ret) - goto err_driver_register; - } - ret = platform_driver_register(&vhci_driver); if (ret) goto err_driver_register; for (i = 0; i < vhci_num_controllers; i++) { - ret = platform_device_add(vhcis[i].pdev); + void *vhci = &vhcis[i]; + struct platform_device_info pdevinfo = { + .name = driver_name, + .id = i, + .data = &vhci, + .size_data = sizeof(void *), + }; + + vhcis[i].pdev = platform_device_register_full(&pdevinfo); + ret = PTR_ERR_OR_ZERO(vhcis[i].pdev); if (ret < 0) { - i--; - while (i >= 0) - platform_device_del(vhcis[i--].pdev); + while (i--) + platform_device_unregister(vhcis[i].pdev); goto err_add_hcd; } } - return ret; + return 0; err_add_hcd: platform_driver_unregister(&vhci_driver); err_driver_register: - for (i = 0; i < vhci_num_controllers; i++) - platform_device_put(vhcis[i].pdev); -err_device_alloc: kfree(vhcis); return ret; } diff --git a/include/linux/thunderbolt.h b/include/linux/thunderbolt.h index 02333f47c994..6151c210d987 100644 --- a/include/linux/thunderbolt.h +++ b/include/linux/thunderbolt.h @@ -175,7 +175,7 @@ void tb_unregister_property_dir(const char *key, struct tb_property_dir *dir); * enum tb_link_width - Thunderbolt/USB4 link width * @TB_LINK_WIDTH_SINGLE: Single lane link * @TB_LINK_WIDTH_DUAL: Dual lane symmetric link - * @TB_LINK_WIDTH_ASYM_TX: Dual lane asymmetric Gen 4 link with 3 trasmitters + * @TB_LINK_WIDTH_ASYM_TX: Dual lane asymmetric Gen 4 link with 3 transmitters * @TB_LINK_WIDTH_ASYM_RX: Dual lane asymmetric Gen 4 link with 3 receivers */ enum tb_link_width { diff --git a/include/linux/usb.h b/include/linux/usb.h index a21074861f91..8c61643acd49 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1823,22 +1823,6 @@ void *usb_alloc_coherent(struct usb_device *dev, size_t size, void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, dma_addr_t dma); -#if 0 -struct urb *usb_buffer_map(struct urb *urb); -void usb_buffer_dmasync(struct urb *urb); -void usb_buffer_unmap(struct urb *urb); -#endif - -struct scatterlist; -int usb_buffer_map_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int nents); -#if 0 -void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int n_hw_ents); -#endif -void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int n_hw_ents); - /*-------------------------------------------------------------------* * SYNCHRONOUS CALL SUPPORT * *-------------------------------------------------------------------*/ diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 0b4f2d5faa08..5a7f96684ea2 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -64,6 +64,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_PMQOS BIT(15) #define CI_HDRC_PHY_VBUS_CONTROL BIT(16) #define CI_HDRC_HAS_PORTSC_PEC_MISSED BIT(17) +#define CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS BIT(18) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 6014340ba980..af3cd2aae4bc 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -35,6 +35,14 @@ * are ready. The control transfer will then be kept from completing till * all the function drivers that requested for USB_GADGET_DELAYED_STAUS * invoke usb_composite_setup_continue(). + * + * NOTE: USB_GADGET_DELAYED_STATUS must not be used in UDC drivers: they + * must delay completing the status stage for 0-length control transfers + * regardless of the whether USB_GADGET_DELAYED_STATUS is returned from + * the gadget driver's setup() callback. + * Currently, a number of UDC drivers rely on USB_GADGET_DELAYED_STATUS, + * which is a bug. These drivers must be fixed and USB_GADGET_DELAYED_STATUS + * must be contained within the composite framework. */ #define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 75bda0783395..6532beb587b1 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -711,6 +711,15 @@ static inline int usb_gadget_check_config(struct usb_gadget *gadget) * get_interface. Setting a configuration (or interface) is where * endpoints should be activated or (config 0) shut down. * + * The gadget driver's setup() callback does not have to queue a response to + * ep0 within the setup() call, the driver can do it after setup() returns. + * The UDC driver must wait until such a response is queued before proceeding + * with the data/status stages of the control transfer. + * + * NOTE: Currently, a number of UDC drivers rely on USB_GADGET_DELAYED_STATUS + * being returned from the setup() callback, which is a bug. See the comment + * next to USB_GADGET_DELAYED_STATUS for details. + * * (Note that only the default control endpoint is supported. Neither * hosts nor devices generally support control traffic except to ep0.) * diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 61d4f0b793dc..00724b4f6e12 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -484,8 +484,25 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev, extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); +#ifdef CONFIG_USB_PCI_AMD extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); +static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, + const struct hc_driver *driver) +{ + if (!usb_hcd_amd_remote_wakeup_quirk(dev)) + return false; + if (driver->flags & (HCD_USB11 | HCD_USB3)) + return true; + return false; +} +#else /* CONFIG_USB_PCI_AMD */ +static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev, + const struct hc_driver *driver) +{ + return false; +} +#endif extern const struct dev_pm_ops usb_hcd_pci_pm_ops; #endif /* CONFIG_USB_PCI */ diff --git a/include/linux/usb/ljca.h b/include/linux/usb/ljca.h new file mode 100644 index 000000000000..47661feda96c --- /dev/null +++ b/include/linux/usb/ljca.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2023, Intel Corporation. All rights reserved. + */ +#ifndef _LINUX_USB_LJCA_H_ +#define _LINUX_USB_LJCA_H_ + +#include <linux/auxiliary_bus.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#define LJCA_MAX_GPIO_NUM 64 + +#define auxiliary_dev_to_ljca_client(auxiliary_dev) \ + container_of(auxiliary_dev, struct ljca_client, auxdev) + +struct ljca_adapter; + +/** + * typedef ljca_event_cb_t - event callback function signature + * + * @context: the execution context of who registered this callback + * @cmd: the command from device for this event + * @evt_data: the event data payload + * @len: the event data payload length + * + * The callback function is called in interrupt context and the data payload is + * only valid during the call. If the user needs later access of the data, it + * must copy it. + */ +typedef void (*ljca_event_cb_t)(void *context, u8 cmd, const void *evt_data, int len); + +/** + * struct ljca_client - represent a ljca client device + * + * @type: ljca client type + * @id: ljca client id within same client type + * @link: ljca client on the same ljca adapter + * @auxdev: auxiliary device object + * @adapter: ljca adapter the ljca client sit on + * @context: the execution context of the event callback + * @event_cb: ljca client driver register this callback to get + * firmware asynchronous rx buffer pending notifications + * @event_cb_lock: spinlock to protect event callback + */ +struct ljca_client { + u8 type; + u8 id; + struct list_head link; + struct auxiliary_device auxdev; + struct ljca_adapter *adapter; + + void *context; + ljca_event_cb_t event_cb; + /* lock to protect event_cb */ + spinlock_t event_cb_lock; +}; + +/** + * struct ljca_gpio_info - ljca gpio client device info + * + * @num: ljca gpio client device pin number + * @valid_pin_map: ljca gpio client device valid pin mapping + */ +struct ljca_gpio_info { + unsigned int num; + DECLARE_BITMAP(valid_pin_map, LJCA_MAX_GPIO_NUM); +}; + +/** + * struct ljca_i2c_info - ljca i2c client device info + * + * @id: ljca i2c client device identification number + * @capacity: ljca i2c client device capacity + * @intr_pin: ljca i2c client device interrupt pin number if exists + */ +struct ljca_i2c_info { + u8 id; + u8 capacity; + u8 intr_pin; +}; + +/** + * struct ljca_spi_info - ljca spi client device info + * + * @id: ljca spi client device identification number + * @capacity: ljca spi client device capacity + */ +struct ljca_spi_info { + u8 id; + u8 capacity; +}; + +/** + * ljca_register_event_cb - register a callback function to receive events + * + * @client: ljca client device + * @event_cb: callback function + * @context: execution context of event callback + * + * Return: 0 in case of success, negative value in case of error + */ +int ljca_register_event_cb(struct ljca_client *client, ljca_event_cb_t event_cb, void *context); + +/** + * ljca_unregister_event_cb - unregister the callback function for an event + * + * @client: ljca client device + */ +void ljca_unregister_event_cb(struct ljca_client *client); + +/** + * ljca_transfer - issue a LJCA command and wait for a response + * + * @client: ljca client device + * @cmd: the command to be sent to the device + * @obuf: the buffer to be sent to the device; it can be NULL if the user + * doesn't need to transmit data with this command + * @obuf_len: the size of the buffer to be sent to the device; it should + * be 0 when obuf is NULL + * @ibuf: any data associated with the response will be copied here; it can be + * NULL if the user doesn't need the response data + * @ibuf_len: must be initialized to the input buffer size + * + * Return: the actual length of response data for success, negative value for errors + */ +int ljca_transfer(struct ljca_client *client, u8 cmd, const u8 *obuf, + u8 obuf_len, u8 *ibuf, u8 ibuf_len); + +/** + * ljca_transfer_noack - issue a LJCA command without a response + * + * @client: ljca client device + * @cmd: the command to be sent to the device + * @obuf: the buffer to be sent to the device; it can be NULL if the user + * doesn't need to transmit data with this command + * @obuf_len: the size of the buffer to be sent to the device + * + * Return: 0 for success, negative value for errors + */ +int ljca_transfer_noack(struct ljca_client *client, u8 cmd, const u8 *obuf, + u8 obuf_len); + +#endif diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index c59fb79a42e8..eb626af0e4e7 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -228,6 +228,7 @@ enum pd_pdo_type { #define PDO_FIXED_UNCHUNK_EXT BIT(24) /* Unchunked Extended Message supported (Source) */ #define PDO_FIXED_FRS_CURR_MASK (BIT(24) | BIT(23)) /* FR_Swap Current (Sink) */ #define PDO_FIXED_FRS_CURR_SHIFT 23 +#define PDO_FIXED_PEAK_CURR_SHIFT 20 #define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ #define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h index b057250704e8..3a747938cdab 100644 --- a/include/linux/usb/pd_vdo.h +++ b/include/linux/usb/pd_vdo.h @@ -376,6 +376,7 @@ | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5 \ | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7)) +#define VDO_TYPEC_CABLE_SPEED(vdo) ((vdo) & 0x7) #define VDO_TYPEC_CABLE_TYPE(vdo) (((vdo) >> 18) & 0x3) /* diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index d418c55523a7..372898d9eeb0 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -5,16 +5,6 @@ * Copyright (C) 2011 Renesas Solutions Corp. * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #ifndef RENESAS_USB_H #define RENESAS_USB_H diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 8fa781207970..a05d6f6f2536 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -202,6 +202,8 @@ struct typec_cable_desc { * @accessory: Audio, Debug or none. * @identity: Discover Identity command data * @pd_revision: USB Power Delivery Specification Revision if supported + * @attach: Notification about attached USB device + * @deattach: Notification about removed USB device * * Details about a partner that is attached to USB Type-C port. If @identity * member exists when partner is registered, a directory named "identity" is @@ -217,6 +219,9 @@ struct typec_partner_desc { enum typec_accessory accessory; struct usb_pd_identity *identity; u16 pd_revision; /* 0300H = "3.0" */ + + void (*attach)(struct typec_partner *partner, struct device *dev); + void (*deattach)(struct typec_partner *partner, struct device *dev); }; /** @@ -335,4 +340,36 @@ int typec_port_set_usb_power_delivery(struct typec_port *port, struct usb_power_ int typec_partner_set_usb_power_delivery(struct typec_partner *partner, struct usb_power_delivery *pd); +/** + * struct typec_connector - Representation of Type-C port for external drivers + * @attach: notification about device removal + * @deattach: notification about device removal + * + * Drivers that control the USB and other ports (DisplayPorts, etc.), that are + * connected to the Type-C connectors, can use these callbacks to inform the + * Type-C connector class about connections and disconnections. That information + * can then be used by the typec-port drivers to power on or off parts that are + * needed or not needed - as an example, in USB mode if USB2 device is + * enumerated, USB3 components (retimers, phys, and what have you) do not need + * to be powered on. + * + * The attached (enumerated) devices will be liked with the typec-partner device. + */ +struct typec_connector { + void (*attach)(struct typec_connector *con, struct device *dev); + void (*deattach)(struct typec_connector *con, struct device *dev); +}; + +static inline void typec_attach(struct typec_connector *con, struct device *dev) +{ + if (con && con->attach) + con->attach(con, dev); +} + +static inline void typec_deattach(struct typec_connector *con, struct device *dev) +{ + if (con && con->deattach) + con->deattach(con, dev); +} + #endif /* __LINUX_USB_TYPEC_H */ diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h index 8d09c2f0a9b8..1f358098522d 100644 --- a/include/linux/usb/typec_dp.h +++ b/include/linux/usb/typec_dp.h @@ -67,8 +67,10 @@ enum { #define DP_CAP_UFP_D 1 #define DP_CAP_DFP_D 2 #define DP_CAP_DFP_D_AND_UFP_D 3 -#define DP_CAP_DP_SIGNALING BIT(2) /* Always set */ -#define DP_CAP_GEN2 BIT(3) /* Reserved after v1.0b */ +#define DP_CAP_DP_SIGNALLING(_cap_) (((_cap_) & GENMASK(5, 2)) >> 2) +#define DP_CAP_SIGNALLING_HBR3 1 +#define DP_CAP_SIGNALLING_UHBR10 2 +#define DP_CAP_SIGNALLING_UHBR20 3 #define DP_CAP_RECEPTACLE BIT(6) #define DP_CAP_USB BIT(7) #define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8) @@ -78,6 +80,13 @@ enum { DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_)) #define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_)) +#define DP_CAP_UHBR_13_5_SUPPORT BIT(26) +#define DP_CAP_CABLE_TYPE(_cap_) (((_cap_) & GENMASK(29, 28)) >> 28) +#define DP_CAP_CABLE_TYPE_PASSIVE 0 +#define DP_CAP_CABLE_TYPE_RE_TIMER 1 +#define DP_CAP_CABLE_TYPE_RE_DRIVER 2 +#define DP_CAP_CABLE_TYPE_OPTICAL 3 +#define DP_CAP_DPAM_VERSION BIT(30) /* DisplayPort Status Update VDO bits */ #define DP_STATUS_CONNECTION(_status_) ((_status_) & 3) @@ -97,13 +106,24 @@ enum { #define DP_CONF_CURRENTLY(_conf_) ((_conf_) & 3) #define DP_CONF_UFP_U_AS_DFP_D BIT(0) #define DP_CONF_UFP_U_AS_UFP_D BIT(1) -#define DP_CONF_SIGNALING_DP BIT(2) -#define DP_CONF_SIGNALING_GEN_2 BIT(3) /* Reserved after v1.0b */ +#define DP_CONF_SIGNALLING_MASK GENMASK(5, 2) +#define DP_CONF_SIGNALLING_SHIFT 2 +#define DP_CONF_SIGNALLING_HBR3 1 +#define DP_CONF_SIGNALLING_UHBR10 2 +#define DP_CONF_SIGNALLING_UHBR20 3 #define DP_CONF_PIN_ASSIGNEMENT_SHIFT 8 #define DP_CONF_PIN_ASSIGNEMENT_MASK GENMASK(15, 8) /* Helper for setting/getting the pin assignment value to the configuration */ #define DP_CONF_SET_PIN_ASSIGN(_a_) ((_a_) << 8) #define DP_CONF_GET_PIN_ASSIGN(_conf_) (((_conf_) & GENMASK(15, 8)) >> 8) +#define DP_CONF_UHBR13_5_SUPPORT BIT(26) +#define DP_CONF_CABLE_TYPE_MASK GENMASK(29, 28) +#define DP_CONF_CABLE_TYPE_SHIFT 28 +#define DP_CONF_CABLE_TYPE_PASSIVE 0 +#define DP_CONF_CABLE_TYPE_RE_TIMER 1 +#define DP_CONF_CABLE_TYPE_RE_DRIVER 2 +#define DP_CONF_CABLE_TYPE_OPTICAL 3 +#define DP_CONF_DPAM_VERSION BIT(30) #endif /* __USB_TYPEC_DP_H */ diff --git a/include/linux/usb/typec_tbt.h b/include/linux/usb/typec_tbt.h index 63dd44b72e0c..c7a2153bd6f5 100644 --- a/include/linux/usb/typec_tbt.h +++ b/include/linux/usb/typec_tbt.h @@ -46,6 +46,7 @@ struct typec_thunderbolt_data { #define TBT_CABLE_OPTICAL BIT(21) #define TBT_CABLE_RETIMER BIT(22) #define TBT_CABLE_LINK_TRAINING BIT(23) +#define TBT_CABLE_ACTIVE_PASSIVE BIT(25) #define TBT_SET_CABLE_SPEED(_s_) (((_s_) & GENMASK(2, 0)) << 16) #define TBT_SET_CABLE_ROUNDED(_g_) (((_g_) & GENMASK(1, 0)) << 19) diff --git a/include/uapi/linux/usb/raw_gadget.h b/include/uapi/linux/usb/raw_gadget.h index c7d2199134d7..f0224a8dc858 100644 --- a/include/uapi/linux/usb/raw_gadget.h +++ b/include/uapi/linux/usb/raw_gadget.h @@ -44,6 +44,16 @@ enum usb_raw_event_type { /* This event is queued when a new control request arrived to ep0. */ USB_RAW_EVENT_CONTROL = 2, + /* + * These events are queued when the gadget driver is suspended, + * resumed, reset, or disconnected. Note that some UDCs (e.g. dwc2) + * report a disconnect event instead of a reset. + */ + USB_RAW_EVENT_SUSPEND = 3, + USB_RAW_EVENT_RESUME = 4, + USB_RAW_EVENT_RESET = 5, + USB_RAW_EVENT_DISCONNECT = 6, + /* The list might grow in the future. */ }; @@ -54,8 +64,8 @@ enum usb_raw_event_type { * actual length of the fetched event data. * @data: A buffer to store the fetched event data. * - * Currently the fetched data buffer is empty for USB_RAW_EVENT_CONNECT, - * and contains struct usb_ctrlrequest for USB_RAW_EVENT_CONTROL. + * The fetched event data buffer contains struct usb_ctrlrequest for + * USB_RAW_EVENT_CONTROL and is empty for other events. */ struct usb_raw_event { __u32 type; |