diff options
90 files changed, 991 insertions, 851 deletions
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index d6ac18d04da7..ecd0bb664dad 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -94,6 +94,6 @@ extern int ocpi_enable(void); static inline int ocpi_enable(void) { return 0; } #endif -extern int omap1_get_reset_sources(void); +extern u32 omap1_get_reset_sources(void); #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 645668e2b1d5..745031870ce4 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -17,6 +17,8 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/platform_data/omap-wd-timer.h> + #include <asm/mach/map.h> #include <mach/tc.h> @@ -448,18 +450,31 @@ static struct resource wdt_resources[] = { }; static struct platform_device omap_wdt_device = { - .name = "omap_wdt", - .id = -1, + .name = "omap_wdt", + .id = -1, .num_resources = ARRAY_SIZE(wdt_resources), .resource = wdt_resources, }; static int __init omap_init_wdt(void) { + struct omap_wd_timer_platform_data pdata; + int ret; + if (!cpu_is_omap16xx()) return -ENODEV; - return platform_device_register(&omap_wdt_device); + pdata.read_reset_sources = omap1_get_reset_sources; + + ret = platform_device_register(&omap_wdt_device); + if (!ret) { + ret = platform_device_add_data(&omap_wdt_device, &pdata, + sizeof(pdata)); + if (ret) + platform_device_del(&omap_wdt_device); + } + + return ret; } subsys_initcall(omap_init_wdt); #endif diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index a0a9f97772ea..5eebd7e889d0 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -4,10 +4,9 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <plat/prcm.h> - #include <mach/hardware.h> +#include "iomap.h" #include "common.h" /* ARM_SYSST bit shifts related to SoC reset sources */ @@ -43,12 +42,12 @@ void omap1_restart(char mode, const char *cmd) * Returns bits that represent the last reset source for the SoC. The * format is standardized across OMAPs for use by the OMAP watchdog. */ -int omap1_get_reset_sources(void) +u32 omap1_get_reset_sources(void) { - int ret = 0; + u32 ret = 0; u16 rs; - rs = __raw_readw(ARM_SYSST); + rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST)); if (rs & (1 << ARM_SYSST_POR_SHIFT)) ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ae87a3ea53ae..96621a20413a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -50,6 +50,11 @@ AFLAGS_sram242x.o :=-Wa,-march=armv6 AFLAGS_sram243x.o :=-Wa,-march=armv6 AFLAGS_sram34xx.o :=-Wa,-march=armv7-a +# Restart code (OMAP4/5 currently in omap4-common.c) +obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o +obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o +obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o + # Pin multiplexing obj-$(CONFIG_SOC_OMAP2420) += mux2420.o obj-$(CONFIG_SOC_OMAP2430) += mux2430.o @@ -94,7 +99,7 @@ obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o endif # PRCM -obj-y += prcm.o prm_common.o cm_common.o +obj-y += prm_common.o cm_common.o obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h index 06c19bb7bca6..43296c1af9ee 100644 --- a/arch/arm/mach-omap2/am33xx.h +++ b/arch/arm/mach-omap2/am33xx.h @@ -21,5 +21,6 @@ #define AM33XX_SCM_BASE 0x44E10000 #define AM33XX_CTRL_BASE AM33XX_SCM_BASE #define AM33XX_PRCM_BASE 0x44E00000 +#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + 0x3FC) #endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 3fc6d839fb3a..acb0a524ff7b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -286,5 +286,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .init_machine = omap_2430sdp_init, .init_late = omap2430_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 79fd9048fd79..6601754f9512 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -597,5 +597,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .init_machine = omap_3430sdp_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 81871b1c735c..050aaa771254 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -212,5 +212,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .init_machine = omap_sdp_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index fd80d976872d..85dfa71e0dc6 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -881,5 +881,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .init_machine = omap_4430sdp_init, .init_late = omap4430_init_late, .timer = &omap4_timer, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 603503c587b7..51b96a1206d1 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -93,5 +93,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .init_machine = am3517_crane_init, .init_late = am35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 96d6c5ab5d4c..4be58fd071f6 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -393,5 +393,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .init_machine = am3517_evm_init, .init_late = am35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 64cf1bde0f3b..5d0a61f54165 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -338,5 +338,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .init_machine = omap_apollon_init, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index cf9449bde186..488f86fd0e72 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -753,18 +753,18 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_machine = cm_t35_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(CM_T3730, "Compulab CM-T3730") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap3_init_irq, .handle_irq = omap3_intc_handle_irq, - .init_machine = cm_t3730_init, + .init_machine = cm_t3730_init, .init_late = omap3630_init_late, - .timer = &omap3_timer, - .restart = omap_prcm_restart, + .timer = &omap3_timer, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 278664731d2c..699caec8f9e2 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -298,5 +298,5 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .init_machine = cm_t3517_init, .init_late = am35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 933479e36737..7667eb749522 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -643,5 +643,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_machine = devkit8000_init, .init_late = omap35xx_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 601ecdfb1cf9..475e14f07216 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -57,7 +57,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END #endif @@ -76,7 +76,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap243x_boards_compat, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END #endif @@ -95,7 +95,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END #endif @@ -134,7 +134,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .init_late = omap4430_init_late, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END #endif @@ -154,6 +154,6 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap5_timer, .dt_compat = omap5_boards_compat, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index bd11b0aa9495..3c1e458f68a1 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -386,5 +386,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .init_machine = omap_h4_init, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index dbc705ac4334..cea5d5292628 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -651,7 +651,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .init_machine = igep_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -664,5 +664,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .init_machine = igep_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 1164b1061038..0869f4f3d3e1 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -436,5 +436,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .init_machine = omap_ldp_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e3efcb88cb3b..a4e167c55c1d 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -690,7 +690,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -703,7 +703,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -716,5 +716,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .init_machine = n8x0_init_machine, .init_late = omap2420_init_late, .timer = &omap2_timer, - .restart = omap_prcm_restart, + .restart = omap2xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 85c09a09c5e3..8471c279ecd8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -541,5 +541,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_machine = omap3_beagle_init, .init_late = omap3_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3c0b9a90f3b3..54647d6286b4 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -757,5 +757,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .init_machine = omap3_evm_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index e84e2a875378..2a065ba6eb58 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -232,7 +232,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") @@ -245,5 +245,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .init_machine = omap3logic_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index ce31bd329f38..a53a6683c1b8 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -619,5 +619,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .init_machine = omap3pandora_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index ba1124538b9c..d8638b3b4f94 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -427,5 +427,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .init_machine = omap3_stalker_init, .init_late = omap35xx_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index a225d819633f..263cb9cfbf37 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -387,5 +387,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .init_machine = omap3_touchbook_init, .init_late = omap3430_init_late, .timer = &omap3_secure_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 8c00b99cd2a3..12a3a24d5bb5 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -524,5 +524,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .init_machine = omap4_panda_init, .init_late = omap4430_init_late, .timer = &omap4_timer, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1cfb0374f5e2..140b73094aff 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -553,5 +553,5 @@ MACHINE_START(OVERO, "Gumstix Overo") .init_machine = overo_init, .init_late = omap35xx_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 1997e0e722a1..cbcb1b2dc31f 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -148,7 +148,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .init_machine = rm680_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") @@ -161,5 +161,5 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") .init_machine = rm680_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index c388aec14799..bf8f74b0ce3e 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -127,5 +127,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .init_machine = rx51_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 5e672c2b6a43..1a3e056d63a7 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -46,7 +46,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") .timer = &omap3_timer, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END MACHINE_START(TI8148EVM, "ti8148evm") @@ -58,5 +58,5 @@ MACHINE_START(TI8148EVM, "ti8148evm") .timer = &omap3_timer, .init_machine = ti81xx_evm_init, .init_late = ti81xx_init_late, - .restart = omap_prcm_restart, + .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 8feb4d99b96d..d7fa31e67238 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -138,7 +138,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .init_machine = omap_zoom_init, .init_late = omap3430_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -151,5 +151,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .init_machine = omap_zoom_init, .init_late = omap3630_init_late, .timer = &omap3_timer, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c index e3f0c1e262a7..8c5b13e7ee61 100644 --- a/arch/arm/mach-omap2/clkt2xxx_apll.c +++ b/arch/arm/mach-omap2/clkt2xxx_apll.c @@ -21,7 +21,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/prcm.h> #include "clock.h" #include "clock2xxx.h" @@ -37,44 +36,16 @@ #define APLLS_CLKIN_13MHZ 2 #define APLLS_CLKIN_12MHZ 3 -void __iomem *cm_idlest_pll; - /* Private functions */ -/* Enable an APLL if off */ -static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) -{ - u32 cval, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - - if ((cval & apll_mask) == apll_mask) - return 0; /* apll already enabled */ - - cval &= ~apll_mask; - cval |= apll_mask; - omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); - - omap2_cm_wait_idlest(cm_idlest_pll, status_mask, - OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk)); - - /* - * REVISIT: Should we return an error code if omap2_wait_clock_ready() - * fails? - */ - return 0; -} - -static int omap2_clk_apll96_enable(struct clk *clk) +static int _apll96_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK); + return omap2xxx_cm_apll96_enable(); } -static int omap2_clk_apll54_enable(struct clk *clk) +static int _apll54_enable(struct clk *clk) { - return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK); + return omap2xxx_cm_apll54_enable(); } static void _apll96_allow_idle(struct clk *clk) @@ -97,28 +68,28 @@ static void _apll54_deny_idle(struct clk *clk) omap2xxx_cm_set_apll54_disable_autoidle(); } -/* Stop APLL */ -static void omap2_clk_apll_disable(struct clk *clk) +static void _apll96_disable(struct clk *clk) { - u32 cval; + omap2xxx_cm_apll96_disable(); +} - cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); - cval &= ~(EN_APLL_LOCKED << clk->enable_bit); - omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); +static void _apll54_disable(struct clk *clk) +{ + omap2xxx_cm_apll54_disable(); } /* Public data */ const struct clkops clkops_apll96 = { - .enable = omap2_clk_apll96_enable, - .disable = omap2_clk_apll_disable, + .enable = _apll96_enable, + .disable = _apll96_disable, .allow_idle = _apll96_allow_idle, .deny_idle = _apll96_deny_idle, }; const struct clkops clkops_apll54 = { - .enable = omap2_clk_apll54_enable, - .disable = omap2_clk_apll_disable, + .enable = _apll54_enable, + .disable = _apll54_disable, .allow_idle = _apll54_allow_idle, .deny_idle = _apll54_deny_idle, }; diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 3432f913f743..e687163a68fe 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -30,15 +30,21 @@ #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ +/* + * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx + * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set + * during dpll_ck init and used later by omap2xxx_clk_get_core_rate(). + */ +static struct clk *dpll_core_ck; + /** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate - * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") * * Returns the CORE_CLK rate. CORE_CLK can have one of three rate * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz @@ -46,12 +52,14 @@ * struct clk *dpll_ck, which is a composite clock of dpll_ck and * core_ck. */ -unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) +unsigned long omap2xxx_clk_get_core_rate(void) { long long core_clk; u32 v; - core_clk = omap2_get_dpll_rate(clk); + WARN_ON(!dpll_core_ck); + + core_clk = omap2_get_dpll_rate(dpll_core_ck); v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); v &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -99,7 +107,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate) unsigned long omap2_dpllcore_recalc(struct clk *clk) { - return omap2xxx_clk_get_core_rate(clk); + return omap2xxx_clk_get_core_rate(); } int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) @@ -109,7 +117,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) struct prcm_config tmpset; const struct dpll_data *dd; - cur_rate = omap2xxx_clk_get_core_rate(dclk); + cur_rate = omap2xxx_clk_get_core_rate(); mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); mult &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -170,3 +178,19 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) return 0; } +/** + * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck + * @clk: struct clk *dpll_ck + * + * Store a local copy of @clk in dpll_core_ck so other code can query + * the core rate without having to clk_get(), which can sleep. Must + * only be called once. No return value. XXX If the clock + * registration process is ever changed such that dpll_ck is no longer + * statically defined, this code may need to change to increment some + * kind of use count on dpll_ck. + */ +void omap2xxx_clkt_dpllcore_init(struct clk *clk) +{ + WARN(dpll_core_ck, "dpll_core_ck already set - should never happen"); + dpll_core_ck = clk; +} diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index c66276b2bf0a..b9b981bac9d3 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -1,7 +1,7 @@ /* * OMAP2xxx DVFS virtual clock functions * - * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2010 Nokia Corporation * * Contacts: @@ -39,13 +39,20 @@ #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" -#include "cm2xxx_3xxx.h" +#include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; +/* + * sys_ck_rate: the rate of the external high-frequency clock + * oscillator on the board. Set by the SoC-specific clock init code. + * Once set during a boot, will not change. + */ +static unsigned long sys_ck_rate; + /** * omap2_table_mpu_recalc - just return the MPU speed * @clk: virt_prcm_set struct clk @@ -67,15 +74,14 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk) long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) { const struct prcm_config *ptr; - long highest_rate, sys_clk_rate; + long highest_rate; highest_rate = -EINVAL; - sys_clk_rate = __clk_get_rate(sclk); for (ptr = rate_table; ptr->mpu_speed; ptr++) { if (!(ptr->flags & cpu_mask)) continue; - if (ptr->xtal_speed != sys_clk_rate) + if (ptr->xtal_speed != sys_ck_rate) continue; highest_rate = ptr->mpu_speed; @@ -94,15 +100,12 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; - long sys_clk_rate; - - sys_clk_rate = __clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_clk_rate) + if (prcm->xtal_speed != sys_ck_rate) continue; if (prcm->mpu_speed <= rate) { @@ -118,7 +121,7 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) } curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(dclk); + cur_rate = omap2xxx_clk_get_core_rate(); if (prcm->dpll_speed == cur_rate / 2) { omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); @@ -168,3 +171,50 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } + +/** + * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate + * table sets matches the current CORE DPLL hardware rate + * + * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set' + * global to point to the active rate set when found; otherwise, sets + * it to NULL. No return value; + */ +void omap2xxx_clkt_vps_check_bootloader_rates(void) +{ + const struct prcm_config *prcm = NULL; + unsigned long rate; + + rate = omap2xxx_clk_get_core_rate(); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck_rate) + continue; + if (prcm->dpll_speed <= rate) + break; + } + curr_prcm_set = prcm; +} + +/** + * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate + * + * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS + * code. (The sys_ck rate does not -- or rather, must not -- change + * during kernel runtime.) Must be called after we have a valid + * sys_ck rate, but before the virt_prcm_set clock rate is + * recalculated. No return value. + */ +void omap2xxx_clkt_vps_late_init(void) +{ + struct clk *c; + + c = clk_get(NULL, "sys_ck"); + if (IS_ERR(c)) { + WARN(1, "could not locate sys_ck\n"); + } else { + sys_ck_rate = clk_get_rate(c); + clk_put(c); + } +} diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c index 7c8d41e49834..fe774a09dd0c 100644 --- a/arch/arm/mach-omap2/clkt_iclk.c +++ b/arch/arm/mach-omap2/clkt_iclk.c @@ -14,7 +14,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/prcm.h> #include "clock.h" #include "clock2xxx.h" diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 9205ea7d8dde..e381d991092c 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -26,17 +26,24 @@ #include <asm/cpu.h> -#include <plat/prcm.h> #include <trace/events/power.h> #include "soc.h" #include "clockdomain.h" #include "clock.h" +#include "cm.h" #include "cm2xxx.h" #include "cm3xxx.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" +#include "common.h" + +/* + * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait + * for a module to indicate that it is no longer in idle + */ +#define MAX_MODULE_ENABLE_WAIT 100000 u16 cpu_mask; @@ -58,6 +65,40 @@ static DEFINE_SPINLOCK(clockfw_lock); /* Private functions */ + +/** + * _wait_idlest_generic - wait for a module to leave the idle state + * @reg: virtual address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @idlest: idle state indicator (0 or 1) for the clock + * @name: name of the clock (for printk) + * + * Wait for a module to leave idle, where its idle-status register is + * not inside the CM module. Returns 1 if the module left idle + * promptly, or 0 if the module did not leave idle before the timeout + * elapsed. XXX Deprecated - should be moved into drivers for the + * individual IP block that the IDLEST register exists in. + */ +static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest, + const char *name) +{ + int i = 0, ena = 0; + + ena = (idlest) ? 0 : mask; + + omap_test_timeout(((__raw_readl(reg) & mask) == ena), + MAX_MODULE_ENABLE_WAIT, i); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("omap clock: module associated with clock %s ready after %d loops\n", + name, i); + else + pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", + name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + /** * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE * @clk: struct clk * belonging to the module @@ -71,7 +112,9 @@ static DEFINE_SPINLOCK(clockfw_lock); static void _omap2_module_wait_ready(struct clk *clk) { void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit, idlest_val; + u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; + s16 prcm_mod; + int r; /* Not all modules have multiple clocks that their IDLEST depends on */ if (clk->ops->find_companion) { @@ -82,8 +125,14 @@ static void _omap2_module_wait_ready(struct clk *clk) clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); - omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val, - __clk_get_name(clk)); + r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id); + if (r) { + /* IDLEST register not in the CM module */ + _wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val, + clk->name); + } else { + cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit); + }; } /* Public functions */ diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index cfba1ffe5cc2..ff9789bc0fd1 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -409,33 +409,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk *clk); u32 omap2_get_dpll_rate(struct clk *clk); void omap2_init_dpll_parent(struct clk *clk); -int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); - - -#ifdef CONFIG_ARCH_OMAP2 -void omap2xxx_clk_prepare_for_reboot(void); -#else -static inline void omap2xxx_clk_prepare_for_reboot(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -void omap3_clk_prepare_for_reboot(void); -#else -static inline void omap3_clk_prepare_for_reboot(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP4 -void omap4_clk_prepare_for_reboot(void); -#else -static inline void omap4_clk_prepare_for_reboot(void) -{ -} -#endif - int omap2_dflt_clk_enable(struct clk *clk); void omap2_dflt_clk_disable(struct clk *clk); void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, @@ -454,7 +427,6 @@ extern const struct clkops clkops_dummy; extern const struct clkops clkops_omap2_dflt; extern struct clk_functions omap2_clk_functions; -extern struct clk *vclk, *sclk; extern const struct clksel_rate gpt_32k_rates[]; extern const struct clksel_rate gpt_sys_rates[]; diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index da1e388f22f7..608874b651e8 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1,7 +1,7 @@ /* * OMAP2420 clock data * - * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2011 Nokia Corporation * * Contacts: @@ -124,6 +124,7 @@ static struct clk dpll_ck = { .name = "dpll_ck", .ops = &clkops_omap2xxx_dpll_ops, .parent = &sys_ck, /* Can be func_32k also */ + .init = &omap2xxx_clkt_dpllcore_init, .dpll_data = &dpll_dd, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, @@ -1924,12 +1925,9 @@ static struct omap_clk omap2420_clks[] = { int __init omap2420_clk_init(void) { - const struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate; prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; - cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST); cpu_mask = RATE_IN_242X; rate_table = omap2420_rate_table; @@ -1949,20 +1947,13 @@ int __init omap2420_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + /* Disable autoidle on all clocks; let the PM code enable it later */ omap_clk_disable_autoidle_all(); - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; + /* XXX Can this be done from the virt_prcm_set clk init function? */ + omap2xxx_clkt_vps_check_bootloader_rates(); recalculate_root_clocks(); @@ -1976,11 +1967,6 @@ int __init omap2420_clk_init(void) */ clk_enable_init_clocks(); - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - dclk = clk_get(NULL, "dpll_ck"); - return 0; } diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index c97dafef894d..b179b6ef4329 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1,7 +1,7 @@ /* * OMAP2430 clock data * - * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2004-2011 Nokia Corporation * * Contacts: @@ -123,6 +123,7 @@ static struct clk dpll_ck = { .name = "dpll_ck", .ops = &clkops_omap2xxx_dpll_ops, .parent = &sys_ck, /* Can be func_32k also */ + .init = &omap2xxx_clkt_dpllcore_init, .dpll_data = &dpll_dd, .clkdm_name = "wkup_clkdm", .recalc = &omap2_dpllcore_recalc, @@ -2023,12 +2024,9 @@ static struct omap_clk omap2430_clks[] = { int __init omap2430_clk_init(void) { - const struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate; prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; - cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST); cpu_mask = RATE_IN_243X; rate_table = omap2430_rate_table; @@ -2048,20 +2046,13 @@ int __init omap2430_clk_init(void) omap2_init_clk_clkdm(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + /* Disable autoidle on all clocks; let the PM code enable it later */ omap_clk_disable_autoidle_all(); - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; + /* XXX Can this be done from the virt_prcm_set clk init function? */ + omap2xxx_clkt_vps_check_bootloader_rates(); recalculate_root_clocks(); @@ -2075,11 +2066,6 @@ int __init omap2430_clk_init(void) */ clk_enable_init_clocks(); - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - dclk = clk_get(NULL, "dpll_ck"); - return 0; } diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c index 5feee16fee0e..5f7faeb4c19b 100644 --- a/arch/arm/mach-omap2/clock2xxx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -28,27 +28,11 @@ #include "cm.h" #include "cm-regbits-24xx.h" -struct clk *vclk, *sclk, *dclk; - /* * Omap24xx specific clock functions */ /* - * Set clocks for bypass mode for reboot to work. - */ -void omap2xxx_clk_prepare_for_reboot(void) -{ - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -} - -/* * Switch the MPU rate if specified on cmdline. We cannot do this * early until cmdline is parsed. XXX This should be removed from the * clock code and handled by the OPP layer code in the near future. diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index cb6df8ca9e4a..ce809c913b6f 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -15,10 +15,13 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk *clk); unsigned long omap2_osc_clk_recalc(struct clk *clk); unsigned long omap2_dpllcore_recalc(struct clk *clk); int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); -unsigned long omap2xxx_clk_get_core_rate(struct clk *clk); +unsigned long omap2xxx_clk_get_core_rate(void); u32 omap2xxx_get_apll_clkin(void); u32 omap2xxx_get_sysclkdiv(void); void omap2xxx_clk_prepare_for_reboot(void); +void omap2xxx_clkt_dpllcore_init(struct clk *clk); +void omap2xxx_clkt_vps_check_bootloader_rates(void); +void omap2xxx_clkt_vps_late_init(void); #ifdef CONFIG_SOC_OMAP2420 int omap2420_clk_init(void); @@ -32,9 +35,7 @@ int omap2430_clk_init(void); #define omap2430_clk_init() do { } while(0) #endif -extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll; - -extern struct clk *dclk; +extern void __iomem *prcm_clksrc_ctrl; extern const struct clkops clkops_omap2430_i2chs_wait; extern const struct clkops clkops_oscck; diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h index 686290437568..11eaf16880c4 100644 --- a/arch/arm/mach-omap2/cm-regbits-24xx.h +++ b/arch/arm/mach-omap2/cm-regbits-24xx.h @@ -333,7 +333,9 @@ #define OMAP24XX_EN_DPLL_MASK (0x3 << 0) /* CM_IDLEST_CKGEN */ +#define OMAP24XX_ST_54M_APLL_SHIFT 9 #define OMAP24XX_ST_54M_APLL_MASK (1 << 9) +#define OMAP24XX_ST_96M_APLL_SHIFT 8 #define OMAP24XX_ST_96M_APLL_MASK (1 << 8) #define OMAP24XX_ST_54M_CLK_MASK (1 << 6) #define OMAP24XX_ST_12M_CLK_MASK (1 << 5) diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index b3cee913dd67..93473f9a551c 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -1,7 +1,7 @@ /* * OMAP2+ Clock Management prototypes * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley @@ -22,6 +22,12 @@ */ #define MAX_MODULE_READY_TIME 2000 +# ifndef __ASSEMBLER__ +extern void __iomem *cm_base; +extern void __iomem *cm2_base; +extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); +# endif + /* * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for * the PRCM to request that a module enter the inactive state in the @@ -37,8 +43,18 @@ /** * struct cm_ll_data - fn ptrs to per-SoC CM function implementations + * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl + * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl */ -struct cm_ll_data {}; +struct cm_ll_data { + int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); + int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); +}; + +extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id); +extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); extern int cm_register(struct cm_ll_data *cld); extern int cm_unregister(struct cm_ll_data *cld); diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index 64165013daf9..db650690e9d0 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -35,6 +35,9 @@ #define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0 #define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 +/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */ +#define EN_APLL_LOCKED 3 + static const u8 omap2xxx_cm_idlest_offs[] = { CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4 }; @@ -99,7 +102,7 @@ void omap2xxx_cm_set_dpll_auto_low_power_stop(void) } /* - * APLL autoidle control + * APLL control */ static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask) @@ -136,6 +139,102 @@ void omap2xxx_cm_set_apll96_auto_low_power_stop(void) OMAP24XX_AUTO_96M_MASK); } +/* Enable an APLL if off */ +static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit) +{ + u32 v, m; + + m = EN_APLL_LOCKED << enable_bit; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + if (v & m) + return 0; /* apll already enabled */ + + v |= m; + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); + + omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit); + + /* + * REVISIT: Should we return an error code if + * omap2xxx_cm_wait_module_ready() fails? + */ + return 0; +} + +/* Stop APLL */ +static void _omap2xxx_apll_disable(u8 enable_bit) +{ + u32 v; + + v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + v &= ~(EN_APLL_LOCKED << enable_bit); + omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll54_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT, + OMAP24XX_ST_54M_APLL_SHIFT); +} + +/* Enable an APLL if off */ +int omap2xxx_cm_apll96_enable(void) +{ + return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT, + OMAP24XX_ST_96M_APLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll54_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT); +} + +/* Stop APLL */ +void omap2xxx_cm_apll96_disable(void) +{ + _omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT); +} + +/** + * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * XXX This function is only needed until absolute register addresses are + * removed from the OMAP struct clk records. + */ +int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + unsigned long offs; + u8 idlest_offs; + int i; + + if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff)) + return -EINVAL; + + idlest_offs = (unsigned long)idlest_reg & 0xff; + for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) { + if (idlest_offs == omap2xxx_cm_idlest_offs[i]) { + *idlest_reg_id = i + 1; + break; + } + } + + if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs)) + return -EINVAL; + + offs = idlest_reg - cm_base; + offs &= 0xff00; + *prcm_inst = offs; + + return 0; +} + /* * */ @@ -253,3 +352,30 @@ struct clkdm_ops omap2_clkdm_operations = { .clkdm_clk_disable = omap2xxx_clkdm_clk_disable, }; +/* + * + */ + +static struct cm_ll_data omap2xxx_cm_ll_data = { + .split_idlest_reg = &omap2xxx_cm_split_idlest_reg, + .wait_module_ready = &omap2xxx_cm_wait_module_ready, +}; + +int __init omap2xxx_cm_init(void) +{ + if (!cpu_is_omap24xx()) + return 0; + + return cm_register(&omap2xxx_cm_ll_data); +} + +static void __exit omap2xxx_cm_exit(void) +{ + if (!cpu_is_omap24xx()) + return; + + /* Should never happen */ + WARN(cm_unregister(&omap2xxx_cm_ll_data), + "%s: cm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap2xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index bce3c4be6d1f..4cbb39b051d2 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -60,6 +60,10 @@ extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); +extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, u8 *idlest_reg_id); + +extern int __init omap2xxx_cm_init(void); #endif diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index 0e26bb1bf7e2..98e6b3c9cd9b 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -16,7 +16,7 @@ #ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H #define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H -#include "prcm-common.h" +#include "cm.h" /* * Module specific CM register offsets from CM_BASE + domain offset @@ -96,6 +96,11 @@ static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx); } +extern int omap2xxx_cm_apll54_enable(void); +extern void omap2xxx_cm_apll54_disable(void); +extern int omap2xxx_cm_apll96_enable(void); +extern void omap2xxx_cm_apll96_disable(void); + #endif /* CM register bits shared between 24XX and 3430 */ @@ -111,5 +116,4 @@ static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) /* CM_IDLEST_GFX */ #define OMAP_ST_GFX_MASK (1 << 0) - #endif diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 8b03ec2f4394..c2086f2e86b6 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -110,6 +110,44 @@ int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } +/** + * omap3xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * XXX This function is only needed until absolute register addresses are + * removed from the OMAP struct clk records. + */ +int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + unsigned long offs; + u8 idlest_offs; + int i; + + if (idlest_reg < (cm_base + OMAP3430_IVA2_MOD) || + idlest_reg > (cm_base + 0x1ffff)) + return -EINVAL; + + idlest_offs = (unsigned long)idlest_reg & 0xff; + for (i = 0; i < ARRAY_SIZE(omap3xxx_cm_idlest_offs); i++) { + if (idlest_offs == omap3xxx_cm_idlest_offs[i]) { + *idlest_reg_id = i + 1; + break; + } + } + + if (i == ARRAY_SIZE(omap3xxx_cm_idlest_offs)) + return -EINVAL; + + offs = idlest_reg - cm_base; + offs &= 0xff00; + *prcm_inst = offs; + + return 0; +} + /* Clockdomain low-level operations */ static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1, @@ -597,3 +635,31 @@ void omap3_cm_restore_context(void) omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD, OMAP3_CM_CLKOUT_CTRL_OFFSET); } + +/* + * + */ + +static struct cm_ll_data omap3xxx_cm_ll_data = { + .split_idlest_reg = &omap3xxx_cm_split_idlest_reg, + .wait_module_ready = &omap3xxx_cm_wait_module_ready, +}; + +int __init omap3xxx_cm_init(void) +{ + if (!cpu_is_omap34xx()) + return 0; + + return cm_register(&omap3xxx_cm_ll_data); +} + +static void __exit omap3xxx_cm_exit(void) +{ + if (!cpu_is_omap34xx()) + return; + + /* Should never happen */ + WARN(cm_unregister(&omap3xxx_cm_ll_data), + "%s: cm_ll_data function pointer mismatch\n", __func__); +} +__exitcall(omap3xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index 4a6ac812edf4..e8e146f4a43f 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -78,9 +78,14 @@ extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); +extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, u8 *idlest_reg_id); + extern void omap3_cm_save_context(void); extern void omap3_cm_restore_context(void); +extern int __init omap3xxx_cm_init(void); + #endif #endif diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 3246cef151dc..0bab493ec133 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -2,7 +2,7 @@ * OMAP2+ common Clock Management (CM) IP block functions * * Copyright (C) 2012 Texas Instruments, Inc. - * Paul Walmsley <paul@pwsan.com> + * Paul Walmsley * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,6 +17,7 @@ #include "cm2xxx.h" #include "cm3xxx.h" #include "cm44xx.h" +#include "common.h" /* * cm_ll_data: function pointers to SoC-specific implementations of @@ -25,6 +26,73 @@ static struct cm_ll_data null_cm_ll_data; static struct cm_ll_data *cm_ll_data = &null_cm_ll_data; +/* cm_base: base virtual address of the CM IP block */ +void __iomem *cm_base; + +/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */ +void __iomem *cm2_base; + +/** + * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use) + * @cm: CM base virtual address + * @cm2: CM2 base virtual address (if present on the booted SoC) + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2) +{ + cm_base = cm; + cm2_base = cm2; +} + +/** + * cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * Given an absolute CM_IDLEST register address @idlest_reg, passes + * the PRCM instance offset and IDLEST register ID back to the caller + * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error, + * or 0 upon success. XXX This function is only needed until absolute + * register addresses are removed from the OMAP struct clk records. + */ +int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + if (!cm_ll_data->split_idlest_reg) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, + idlest_reg_id); +} + +/** + * cm_wait_module_ready - wait for a module to leave idle or standby + * @prcm_mod: PRCM module offset + * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success, -EBUSY if the module doesn't enable in time, or -EINVAL if + * no per-SoC wait_module_ready() function pointer has been registered + * or if the idlest register is unknown on the SoC. + */ +int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +{ + if (!cm_ll_data->wait_module_ready) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift); +} + /** * cm_register - register per-SoC low-level data with the CM * @cld: low-level per-SoC OMAP CM data & function pointers to register diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index d69fdefef985..bd7bab889745 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -38,4 +38,6 @@ extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask); +extern void omap_cm_base_init(void); + #endif diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 34fb5b95859b..5c2fd4863b2b 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -14,196 +14,13 @@ */ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> #include <linux/platform_data/dsp-omap.h> #include <plat/vram.h> -#include "soc.h" -#include "iomap.h" #include "common.h" -#include "clock.h" -#include "sdrc.h" -#include "control.h" #include "omap-secure.h" -/* Global address base setup code */ - -static void __init __omap2_set_globals(struct omap_globals *omap2_globals) -{ - omap2_set_globals_tap(omap2_globals); - omap2_set_globals_sdrc(omap2_globals); - omap2_set_globals_control(omap2_globals); - omap2_set_globals_prcm(omap2_globals); -} - -#if defined(CONFIG_SOC_OMAP2420) - -static struct omap_globals omap242x_globals = { - .class = OMAP242X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x48014000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), -}; - -void __init omap2_set_globals_242x(void) -{ - __omap2_set_globals(&omap242x_globals); -} - -void __init omap242x_map_io(void) -{ - omap242x_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_OMAP2430) - -static struct omap_globals omap243x_globals = { - .class = OMAP243X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4900a000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), -}; - -void __init omap2_set_globals_243x(void) -{ - __omap2_set_globals(&omap243x_globals); -} - -void __init omap243x_map_io(void) -{ - omap243x_map_common_io(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP3) - -static struct omap_globals omap3_globals = { - .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830A000), - .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), - .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), -}; - -void __init omap2_set_globals_3xxx(void) -{ - __omap2_set_globals(&omap3_globals); -} - -void __init omap3_map_io(void) -{ - omap34xx_map_common_io(); -} - -/* - * Adjust TAP register base such that omap3_check_revision accesses the correct - * TI81XX register for checking device ID (it adds 0x204 to tap base while - * TI81XX DEVICE ID register is at offset 0x600 from control base). - */ -#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ - TI81XX_CONTROL_DEVICE_ID - 0x204) - -static struct omap_globals ti81xx_globals = { - .class = OMAP343X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), -}; - -void __init omap2_set_globals_ti81xx(void) -{ - __omap2_set_globals(&ti81xx_globals); -} - -void __init ti81xx_map_io(void) -{ - omapti81xx_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_AM33XX) -#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ - TI81XX_CONTROL_DEVICE_ID - 0x204) - -static struct omap_globals am33xx_globals = { - .class = AM335X_CLASS, - .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE), - .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), - .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), - .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), -}; - -void __init omap2_set_globals_am33xx(void) -{ - __omap2_set_globals(&am33xx_globals); -} - -void __init am33xx_map_io(void) -{ - omapam33xx_map_common_io(); -} -#endif - -#if defined(CONFIG_ARCH_OMAP4) -static struct omap_globals omap4_globals = { - .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), - .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), - .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), - .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE), -}; - -void __init omap2_set_globals_443x(void) -{ - __omap2_set_globals(&omap4_globals); -} - -void __init omap4_map_io(void) -{ - omap44xx_map_common_io(); -} -#endif - -#if defined(CONFIG_SOC_OMAP5) -static struct omap_globals omap5_globals = { - .class = OMAP54XX_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), - .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE), - .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE), - .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), - .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE), - .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE), -}; - -void __init omap2_set_globals_5xxx(void) -{ - omap2_set_globals_tap(&omap5_globals); - omap2_set_globals_control(&omap5_globals); - omap2_set_globals_prcm(&omap5_globals); -} - -void __init omap5_map_io(void) -{ - omap5_map_common_io(); -} -#endif - /* * Stub function for OMAP2 so that common files * continue to build when custom builds are used diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index c925c805969f..c57eeeac7d11 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -43,54 +43,6 @@ #define OMAP_INTC_START NR_IRQS -#ifdef CONFIG_SOC_OMAP2420 -extern void omap242x_map_common_io(void); -#else -static inline void omap242x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -extern void omap243x_map_common_io(void); -#else -static inline void omap243x_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 -extern void omap34xx_map_common_io(void); -#else -static inline void omap34xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_TI81XX -extern void omapti81xx_map_common_io(void); -#else -static inline void omapti81xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_SOC_AM33XX -extern void omapam33xx_map_common_io(void); -#else -static inline void omapam33xx_map_common_io(void) -{ -} -#endif - -#ifdef CONFIG_ARCH_OMAP4 -extern void omap44xx_map_common_io(void); -#else -static inline void omap44xx_map_common_io(void) -{ -} -#endif - #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2) int omap2_pm_init(void); #else @@ -127,14 +79,6 @@ static inline int omap_mux_late_init(void) } #endif -#ifdef CONFIG_SOC_OMAP5 -extern void omap5_map_common_io(void); -#else -static inline void omap5_map_common_io(void) -{ -} -#endif - extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; @@ -167,52 +111,43 @@ void am35xx_init_late(void); void ti81xx_init_late(void); void omap4430_init_late(void); int omap2_common_pm_late_init(void); -void omap_prcm_restart(char, const char *); -/* - * IO bases for various OMAP processors - * Except the tap base, rest all the io bases - * listed are physical addresses. - */ -struct omap_globals { - u32 class; /* OMAP class to detect */ - void __iomem *tap; /* Control module ID code */ - void __iomem *sdrc; /* SDRAM Controller */ - void __iomem *sms; /* SDRAM Memory Scheduler */ - void __iomem *ctrl; /* System Control Module */ - void __iomem *ctrl_pad; /* PAD Control Module */ - void __iomem *prm; /* Power and Reset Management */ - void __iomem *cm; /* Clock Management */ - void __iomem *cm2; - void __iomem *prcm_mpu; -}; - -void omap2_set_globals_242x(void); -void omap2_set_globals_243x(void); -void omap2_set_globals_3xxx(void); -void omap2_set_globals_443x(void); -void omap2_set_globals_5xxx(void); -void omap2_set_globals_ti81xx(void); -void omap2_set_globals_am33xx(void); - -/* These get called from omap2_set_globals_xxxx(), do not call these */ -void omap2_set_globals_tap(struct omap_globals *); -#if defined(CONFIG_SOC_HAS_OMAP2_SDRC) -void omap2_set_globals_sdrc(struct omap_globals *); +#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430) +void omap2xxx_restart(char mode, const char *cmd); #else -static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals) -{ } +static inline void omap2xxx_restart(char mode, const char *cmd) +{ +} #endif -void omap2_set_globals_control(struct omap_globals *); -void omap2_set_globals_prcm(struct omap_globals *); - -void omap242x_map_io(void); -void omap243x_map_io(void); -void omap3_map_io(void); -void am33xx_map_io(void); -void omap4_map_io(void); -void omap5_map_io(void); -void ti81xx_map_io(void); + +#ifdef CONFIG_ARCH_OMAP3 +void omap3xxx_restart(char mode, const char *cmd); +#else +static inline void omap3xxx_restart(char mode, const char *cmd) +{ +} +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +void omap44xx_restart(char mode, const char *cmd); +#else +static inline void omap44xx_restart(char mode, const char *cmd) +{ +} +#endif + +/* This gets called from mach-omap2/io.c, do not call this */ +void __init omap2_set_globals_tap(u32 class, void __iomem *tap); + +void __init omap242x_map_io(void); +void __init omap243x_map_io(void); +void __init omap3_map_io(void); +void __init am33xx_map_io(void); +void __init omap4_map_io(void); +void __init omap5_map_io(void); +void __init ti81xx_map_io(void); + +/* omap_barriers_init() is OMAP4 only */ void omap_barriers_init(void); /** diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 06375ad20917..2adb2683f074 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -147,13 +147,11 @@ static struct omap3_control_regs control_context; #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg)) #define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg)) -void __init omap2_set_globals_control(struct omap_globals *omap2_globals) +void __init omap2_set_globals_control(void __iomem *ctrl, + void __iomem *ctrl_pad) { - if (omap2_globals->ctrl) - omap2_ctrl_base = omap2_globals->ctrl; - - if (omap2_globals->ctrl_pad) - omap4_ctrl_pad_base = omap2_globals->ctrl_pad; + omap2_ctrl_base = ctrl; + omap4_ctrl_pad_base = ctrl_pad; } void __iomem *omap_ctrl_base_get(void) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a89e8256fd0e..4ca8747b3cc9 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -414,6 +414,8 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr); extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode); extern void omap3630_ctrl_disable_rta(void); extern int omap3_ctrl_save_padconf(void); +extern void omap2_set_globals_control(void __iomem *ctrl, + void __iomem *ctrl_pad); #else #define omap_ctrl_base_get() 0 #define omap_ctrl_readb(x) 0 diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index bc2756959be5..bca7a8885703 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -27,7 +27,6 @@ #include <linux/export.h> #include <linux/cpu_pm.h> -#include <plat/prcm.h> #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2ad491d6910b..cf365c387c06 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -646,29 +646,3 @@ static int __init omap2_init_devices(void) return 0; } arch_initcall(omap2_init_devices); - -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -static int __init omap_init_wdt(void) -{ - int id = -1; - struct platform_device *pdev; - struct omap_hwmod *oh; - char *oh_name = "wd_timer2"; - char *dev_name = "omap_wdt"; - - if (!cpu_class_is_omap2() || of_have_populated_dt()) - return 0; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up wd_timer%d hwmod\n", id); - return -EINVAL; - } - - pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0); - WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", - dev_name, oh->name); - return 0; -} -subsys_initcall(omap_init_wdt); -#endif diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 89c57129357a..38ba58c97628 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -35,6 +35,7 @@ #include "mux.h" #include "control.h" #include "display.h" +#include "prm.h" #define DISPC_CONTROL 0x0040 #define DISPC_CONTROL2 0x0238 @@ -512,7 +513,6 @@ static void dispc_disable_outputs(void) } } -#define MAX_MODULE_SOFTRESET_WAIT 10000 int omap_dss_reset(struct omap_hwmod *oh) { struct omap_hwmod_opt_clk *oc; diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index 3da8900598c8..ab7bf181a105 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -31,11 +31,9 @@ #include "omap_device.h" #include "hdq1w.h" +#include "prm.h" #include "common.h" -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /** * omap_hdq1w_reset - reset the OMAP HDQ1W module * @oh: struct omap_hwmod * diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index ad55b943108f..be092e8e5d85 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -20,10 +20,11 @@ */ #include "soc.h" -#include "common.h" #include "omap_hwmod.h" #include "omap_device.h" +#include "prm.h" +#include "common.h" #include "mux.h" #include "i2c.h" @@ -32,9 +33,6 @@ #define OMAP2_I2C_CON_OFFSET 0x24 #define OMAP4_I2C_CON_OFFSET 0xA4 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - #define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 static void __init omap2_i2c_mux_pins(int bus_id) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index cf2362ccb234..f1e121502789 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -559,11 +559,12 @@ void __init omap5xxx_check_revision(void) * detect the exact revision later on in omap2_detect_revision() once map_io * is done. */ -void __init omap2_set_globals_tap(struct omap_globals *omap2_globals) +void __init omap2_set_globals_tap(u32 class, void __iomem *tap) { - omap_revision = omap2_globals->class; - tap_base = omap2_globals->tap; + omap_revision = class; + tap_base = tap; + /* XXX What is this intended to do? */ if (cpu_is_omap34xx()) tap_prod_id = 0x0210; else diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4fadc7895579..c3472bd8e5a4 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -42,8 +42,15 @@ #include "clock44xx.h" #include "omap-pm.h" #include "sdrc.h" +#include "control.h" #include "serial.h" - +#include "cm2xxx.h" +#include "cm3xxx.h" +#include "prm.h" +#include "cm.h" +#include "prcm_mpu44xx.h" +#include "prminst44xx.h" +#include "cminst44xx.h" /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -265,7 +272,7 @@ static struct map_desc omap54xx_io_desc[] __initdata = { #endif #ifdef CONFIG_SOC_OMAP2420 -void __init omap242x_map_common_io(void) +void __init omap242x_map_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); @@ -273,7 +280,7 @@ void __init omap242x_map_common_io(void) #endif #ifdef CONFIG_SOC_OMAP2430 -void __init omap243x_map_common_io(void) +void __init omap243x_map_io(void) { iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); @@ -281,28 +288,28 @@ void __init omap243x_map_common_io(void) #endif #ifdef CONFIG_ARCH_OMAP3 -void __init omap34xx_map_common_io(void) +void __init omap3_map_io(void) { iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); } #endif #ifdef CONFIG_SOC_TI81XX -void __init omapti81xx_map_common_io(void) +void __init ti81xx_map_io(void) { iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc)); } #endif #ifdef CONFIG_SOC_AM33XX -void __init omapam33xx_map_common_io(void) +void __init am33xx_map_io(void) { iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); } #endif #ifdef CONFIG_ARCH_OMAP4 -void __init omap44xx_map_common_io(void) +void __init omap4_map_io(void) { iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc)); omap_barriers_init(); @@ -310,7 +317,7 @@ void __init omap44xx_map_common_io(void) #endif #ifdef CONFIG_SOC_OMAP5 -void __init omap5_map_common_io(void) +void __init omap5_map_io(void) { iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc)); } @@ -377,8 +384,15 @@ static void __init omap_hwmod_init_postsetup(void) #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { - omap2_set_globals_242x(); + omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL); omap2xxx_check_revision(); + omap2xxx_cm_init(); omap_common_init_early(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); @@ -399,8 +413,15 @@ void __init omap2420_init_late(void) #ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { - omap2_set_globals_243x(); + omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL); omap2xxx_check_revision(); + omap2xxx_cm_init(); omap_common_init_early(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); @@ -425,9 +446,16 @@ void __init omap2430_init_late(void) #ifdef CONFIG_ARCH_OMAP3 void __init omap3_init_early(void) { - omap2_set_globals_3xxx(); + omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000)); + omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE), + OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL); omap3xxx_check_revision(); omap3xxx_check_features(); + omap3xxx_cm_init(); omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); @@ -459,7 +487,12 @@ void __init am35xx_init_early(void) void __init ti81xx_init_early(void) { - omap2_set_globals_ti81xx(); + omap2_set_globals_tap(OMAP343X_CLASS, + OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); omap_common_init_early(); @@ -517,7 +550,12 @@ void __init ti81xx_init_late(void) #ifdef CONFIG_SOC_AM33XX void __init am33xx_init_early(void) { - omap2_set_globals_am33xx(); + omap2_set_globals_tap(AM335X_CLASS, + AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE)); + omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE), + NULL); + omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE)); + omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); omap_common_init_early(); @@ -533,7 +571,16 @@ void __init am33xx_init_early(void) #ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { - omap2_set_globals_443x(); + omap2_set_globals_tap(OMAP443X_CLASS, + OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE)); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE)); + omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE)); + omap_prm_base_init(); + omap_cm_base_init(); omap4xxx_check_revision(); omap4xxx_check_features(); omap_common_init_early(); @@ -556,7 +603,16 @@ void __init omap4430_init_late(void) #ifdef CONFIG_SOC_OMAP5 void __init omap5_init_early(void) { - omap2_set_globals_5xxx(); + omap2_set_globals_tap(OMAP54XX_CLASS, + OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE)); + omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE), + OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE)); + omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE)); + omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE), + OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE)); + omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); + omap_prm_base_init(); + omap_cm_base_init(); omap5xxx_check_revision(); omap_common_init_early(); } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a106c75c5338..bf496510eb5e 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -29,7 +29,7 @@ * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. * Sidetone needs non-gated ICLK and sidetone autoidle is broken. */ -#include "cm2xxx_3xxx.h" +#include "cm3xxx.h" #include "cm-regbits-34xx.h" static int omap3_enable_st_clock(unsigned int id, bool enable) diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 627e97e30743..aafdd4ca9f4f 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/platform_data/gpio-omap.h> +#include "prm.h" #include "common.h" #include "control.h" #include "omap_hwmod.h" @@ -43,9 +44,6 @@ #define MSDI_CON_CLKD_MASK (0x3f << 0) #define MSDI_CON_CLKD_SHIFT 0 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */ #define MSDI_TARGET_RESET_CLKD 0x3ff diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c new file mode 100644 index 000000000000..be6bc89ab1e8 --- /dev/null +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -0,0 +1,65 @@ +/* + * omap2-restart.c - code common to all OMAP2xxx machines. + * + * Copyright (C) 2012 Texas Instruments + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include "common.h" +#include "prm2xxx.h" + +/* + * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set + * clock and the sys_ck. Used during the reset process + */ +static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck; + +/* Reboot handling */ + +/** + * omap2xxx_restart - Set DPLL to bypass mode for reboot to work + * + * Set the DPLL to bypass so that reboot completes successfully. No + * return value. + */ +void omap2xxx_restart(char mode, const char *cmd) +{ + u32 rate; + + rate = clk_get_rate(reset_sys_ck); + clk_set_rate(reset_virt_prcm_set_ck, rate); + + /* XXX Should save the cmd argument for use after the reboot */ + + omap2xxx_prm_dpll_reset(); /* never returns */ + while (1); +} + +/** + * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart + * + * Some clocks need to be looked up in advance for the SoC restart + * operation to work - see omap2xxx_restart(). Returns -EINVAL upon + * error or 0 upon success. + */ +static int __init omap2xxx_common_look_up_clks_for_reset(void) +{ + reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set"); + if (IS_ERR(reset_virt_prcm_set_ck)) + return -EINVAL; + + reset_sys_ck = clk_get(NULL, "sys_ck"); + if (IS_ERR(reset_sys_ck)) + return -EINVAL; + + return 0; +} +core_initcall(omap2xxx_common_look_up_clks_for_reset); diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c new file mode 100644 index 000000000000..923c582189e5 --- /dev/null +++ b/arch/arm/mach-omap2/omap3-restart.c @@ -0,0 +1,36 @@ +/* + * omap3-restart.c - Code common to all OMAP3xxx machines. + * + * Copyright (C) 2009, 2012 Texas Instruments + * Copyright (C) 2010 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include "iomap.h" +#include "common.h" +#include "control.h" +#include "prm3xxx.h" + +/* Global address base setup code */ + +/** + * omap3xxx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void omap3xxx_restart(char mode, const char *cmd) +{ + omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); + omap3xxx_prm_dpll3_reset(); /* never returns */ + while (1); +} diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index d25845c471da..64fce07a3ccd 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -29,9 +29,12 @@ #include "omap-wakeupgen.h" #include "soc.h" +#include "iomap.h" #include "common.h" #include "mmc.h" #include "hsmmc.h" +#include "prminst44xx.h" +#include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" #include "omap-secure.h" @@ -280,3 +283,19 @@ int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } #endif + +/** + * omap44xx_restart - trigger a software restart of the SoC + * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c + * @cmd: passed from the userspace program rebooting the system (if provided) + * + * Resets the SoC. For @cmd, see the 'reboot' syscall in + * kernel/sys.c. No return value. + */ +void omap44xx_restart(char mode, const char *cmd) +{ + /* XXX Should save 'cmd' into scratchpad for use after reboot */ + omap4_prminst_global_warm_sw_reset(); /* never returns */ + while (1); +} + diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 37eeb45612f8..139adca3bda1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -141,7 +141,6 @@ #include "clock.h" #include "omap_hwmod.h" -#include <plat/prcm.h> #include "soc.h" #include "common.h" @@ -151,6 +150,7 @@ #include "cm3xxx.h" #include "cminst44xx.h" #include "cm33xx.h" +#include "prm.h" #include "prm3xxx.h" #include "prm44xx.h" #include "prm33xx.h" @@ -158,9 +158,6 @@ #include "mux.h" #include "pm.h" -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" @@ -2064,7 +2061,8 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { - _omap4_disable_module(oh); + if (soc_ops.disable_module) + soc_ops.disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2f1ad87c1bb0..aa701d76efda 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -37,7 +37,6 @@ #include "clockdomain.h" #include "powerdomain.h" -#include <plat/prcm.h> #include <plat-omap/dma-omap.h> #include "../plat-omap/sram.h" diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1678a3284233..dea62a9aad07 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -29,8 +29,6 @@ #include <asm/cpu.h> -#include <plat/prcm.h> - #include "powerdomain.h" #include "clockdomain.h" diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 72df97482cc0..c7d355fafd24 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -406,11 +406,6 @@ #define OMAP3430_EN_CORE_MASK (1 << 0) -/* - * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP - * submodule to exit hardreset - */ -#define MAX_MODULE_HARDRESET_WAIT 10000 /* * Maximum time(us) it takes to output the signal WUCLKOUT of the last @@ -419,24 +414,7 @@ * microseconds on OMAP4, so this timeout may be too high. */ #define MAX_IOPAD_LATCH_TIME 100 - # ifndef __ASSEMBLER__ -extern void __iomem *prm_base; -extern void __iomem *cm_base; -extern void __iomem *cm2_base; -extern void __iomem *prcm_mpu_base; - -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) -extern void omap_prm_base_init(void); -extern void omap_cm_base_init(void); -#else -static inline void omap_prm_base_init(void) -{ -} -static inline void omap_cm_base_init(void) -{ -} -#endif /** * struct omap_prcm_irq - describes a PRCM interrupt bit diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c deleted file mode 100644 index cff270a178c5..000000000000 --- a/arch/arm/mach-omap2/prcm.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/prcm.c - * - * OMAP 24xx Power Reset and Clock Management (PRCM) functions - * - * Copyright (C) 2005 Nokia Corporation - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Rajendra Nayak <rnayak@ti.com> - * - * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. - * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/export.h> - -#include "common.h" -#include <plat/prcm.h> - -#include "soc.h" -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx_3xxx.h" -#include "prm2xxx_3xxx.h" -#include "prm44xx.h" -#include "prminst44xx.h" -#include "cminst44xx.h" -#include "prm-regbits-24xx.h" -#include "prm-regbits-44xx.h" -#include "control.h" - -void __iomem *prm_base; -void __iomem *cm_base; -void __iomem *cm2_base; -void __iomem *prcm_mpu_base; - -#define MAX_MODULE_ENABLE_WAIT 100000 - -u32 omap_prcm_get_reset_sources(void) -{ - /* XXX This presumably needs modification for 34XX */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f; - if (cpu_is_omap44xx()) - return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f; - - return 0; -} -EXPORT_SYMBOL(omap_prcm_get_reset_sources); - -/* Resets clock rates and reboots the system. Only called from system.h */ -void omap_prcm_restart(char mode, const char *cmd) -{ - s16 prcm_offs = 0; - - if (cpu_is_omap24xx()) { - omap2xxx_clk_prepare_for_reboot(); - - prcm_offs = WKUP_MOD; - } else if (cpu_is_omap34xx()) { - prcm_offs = OMAP3430_GR_MOD; - omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); - } else if (cpu_is_omap44xx()) { - omap4_prminst_global_warm_sw_reset(); /* never returns */ - } else { - WARN_ON(1); - } - - /* - * As per Errata i520, in some cases, user will not be able to - * access DDR memory after warm-reset. - * This situation occurs while the warm-reset happens during a read - * access to DDR memory. In that particular condition, DDR memory - * does not respond to a corrupted read command due to the warm - * reset occurrence but SDRC is waiting for read completion. - * SDRC is not sensitive to the warm reset, but the interconnect is - * reset on the fly, thus causing a misalignment between SDRC logic, - * interconnect logic and DDR memory state. - * WORKAROUND: - * Steps to perform before a Warm reset is trigged: - * 1. enable self-refresh on idle request - * 2. put SDRC in idle - * 3. wait until SDRC goes to idle - * 4. generate SW reset (Global SW reset) - * - * Steps to be performed after warm reset occurs (in bootloader): - * if HW warm reset is the source, apply below steps before any - * accesses to SDRAM: - * 1. Reset SMS and SDRC and wait till reset is complete - * 2. Re-initialize SMS, SDRC and memory - * - * NOTE: Above work around is required only if arch reset is implemented - * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need - * the WA since it resets SDRC as well as part of cold reset. - */ - - /* XXX should be moved to some OMAP2/3 specific code */ - omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs, - OMAP2_RM_RSTCTRL); - omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */ -} - -/** - * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness - * @reg: physical address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Returns 1 if the module indicated readiness in time, or 0 if it - * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. - * - * XXX This function is deprecated. It should be removed once the - * hwmod conversion is complete. - */ -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, - const char *name) -{ - int i = 0; - int ena = 0; - - if (idlest) - ena = 0; - else - ena = mask; - - /* Wait for lock */ - omap_test_timeout(((__raw_readl(reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("cm: Module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("cm: Module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) -{ - if (omap2_globals->prm) - prm_base = omap2_globals->prm; - if (omap2_globals->cm) - cm_base = omap2_globals->cm; - if (omap2_globals->cm2) - cm2_base = omap2_globals->cm2; - if (omap2_globals->prcm_mpu) - prcm_mpu_base = omap2_globals->prcm_mpu; - - if (cpu_is_omap44xx() || soc_is_omap54xx()) { - omap_prm_base_init(); - omap_cm_base_init(); - } -} - -/* - * Stubbed functions so that common files continue to build when - * custom builds are used - * XXX These are temporary and should be removed at the earliest possible - * opportunity - */ -int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} - -void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, - s16 cdoffs, u16 clkctrl_offs) -{ -} - -void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index 928dbd4f20ed..c30e44a7fab0 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -20,6 +20,12 @@ #include "prcm_mpu44xx.h" #include "cm-regbits-44xx.h" +/* + * prcm_mpu_base: the virtual address of the start of the PRCM_MPU IP + * block registers + */ +void __iomem *prcm_mpu_base; + /* PRCM_MPU low-level functions */ u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg) @@ -43,3 +49,14 @@ u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } + +/** + * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use) + * @prcm_mpu: PRCM_MPU base virtual address + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu) +{ + prcm_mpu_base = prcm_mpu; +} diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 8a6e250f04b5..884af7bb4afd 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -1,7 +1,7 @@ /* * OMAP44xx PRCM MPU instance offset macros * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010, 2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) @@ -25,6 +25,12 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H +#include "common.h" + +# ifndef __ASSEMBLER__ +extern void __iomem *prcm_mpu_base; +# endif + #define OMAP4430_PRCM_MPU_BASE 0x48243000 #define OMAP44XX_PRCM_MPU_REGADDR(inst, reg) \ @@ -98,6 +104,7 @@ extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx); extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx); extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu); # endif #endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index c30ab5de8d1d..a1a266ce90da 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -1,7 +1,7 @@ /* * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * * Paul Walmsley @@ -15,6 +15,28 @@ #include "prcm-common.h" +# ifndef __ASSEMBLER__ +extern void __iomem *prm_base; +extern void omap2_set_globals_prm(void __iomem *prm); +# endif + + +/* + * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP + * module to softreset + */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 + +/* + * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP + * submodule to exit hardreset + */ +#define MAX_MODULE_HARDRESET_WAIT 10000 + +/* + * Register bitfields + */ + /* * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP * diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index e2860f9c111d..bf24fc47603b 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -20,7 +20,6 @@ #include "common.h" #include <plat/cpu.h> -#include <plat/prcm.h> #include "vp.h" #include "powerdomain.h" @@ -69,6 +68,20 @@ static u32 omap2xxx_prm_read_reset_sources(void) return r; } +/** + * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC + * + * Set the DPLL reset bit, which should reboot the SoC. This is the + * recommended way to restart the SoC. No return value. + */ +void omap2xxx_prm_dpll_reset(void) +{ + omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD, + OMAP2_RM_RSTCTRL); + /* OCP barrier */ + omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL); +} + int omap2xxx_clkdm_sleep(struct clockdomain *clkdm) { omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index 1d97112524f1..fe8a14f190ab 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -124,6 +124,8 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); +extern void omap2xxx_prm_dpll_reset(void); + extern int __init prm2xxx_init(void); extern int __exit prm2xxx_exit(void); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 3330b1bf789d..78532d6fecd7 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -241,11 +241,4 @@ extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm); #define OMAP_LOGICRETSTATE_MASK (1 << 2) -/* - * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP - * submodule to exit hardreset - */ -#define MAX_MODULE_HARDRESET_WAIT 10000 - - #endif diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 1fea656b2ca8..b86116cf0db9 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -20,7 +20,6 @@ #include "common.h" #include <plat/cpu.h> -#include <plat/prcm.h> #include "vp.h" #include "powerdomain.h" @@ -123,6 +122,21 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) } /** + * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC + * + * Set the DPLL3 reset bit, which should reboot the SoC. This is the + * recommended way to restart the SoC, considering Errata i520. No + * return value. + */ +void omap3xxx_prm_dpll3_reset(void) +{ + omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD, + OMAP2_RM_RSTCTRL); + /* OCP barrier */ + omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL); +} + +/** * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events * @events: ptr to a u32, preallocated by caller * diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index a3c28a875410..10cd41a8129e 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -152,6 +152,8 @@ extern void omap3xxx_prm_ocp_barrier(void); extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); +extern void omap3xxx_prm_dpll3_reset(void); + extern u32 omap3xxx_prm_get_reset_sources(void); #endif /* __ASSEMBLER */ diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a799e9552fbf..6d3467af205d 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -18,7 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include <plat/prcm.h> #include "soc.h" #include "iomap.h" diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 6c595798c5c5..d2e0798a4c82 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -25,12 +25,12 @@ #include <linux/slab.h> #include "../plat-omap/common.h" -#include <plat/prcm.h> #include "prm2xxx_3xxx.h" #include "prm2xxx.h" #include "prm3xxx.h" #include "prm44xx.h" +#include "common.h" /* * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs @@ -55,6 +55,9 @@ static struct irq_chip_generic **prcm_irq_chips; */ static struct omap_prcm_irq_setup *prcm_irq_setup; +/* prm_base: base virtual address of the PRM IP block */ +void __iomem *prm_base; + /* * prm_ll_data: function pointers to SoC-specific implementations of * common PRM functions @@ -329,6 +332,17 @@ err: } /** + * omap2_set_globals_prm - set the PRM base address (for early use) + * @prm: PRM base virtual address + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_prm(void __iomem *prm) +{ + prm_base = prm; +} + +/** * prm_read_reset_sources - return the sources of the SoC's last reset * * Return a u32 bitmask representing the reset sources that caused the diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index 46f2efb36596..a2ede2d65481 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -30,4 +30,6 @@ extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, u16 rstctrl_offs); +extern void omap_prm_base_init(void); + #endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 94d4082f87ed..3ed0d62333c5 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -114,12 +114,10 @@ int omap2_sdrc_get_params(unsigned long r, } -void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) +void __init omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms) { - if (omap2_globals->sdrc) - omap2_sdrc_base = omap2_globals->sdrc; - if (omap2_globals->sms) - omap2_sms_base = omap2_globals->sms; + omap2_sdrc_base = sdrc; + omap2_sms_base = sms; } /** diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 69c4b329452e..446aa13511fd 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -51,6 +51,8 @@ static inline u32 sms_read_reg(u16 reg) return __raw_readl(OMAP_SMS_REGADDR(reg)); } +extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms); + /** * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate diff --git a/arch/arm/mach-omap2/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h index 8f9843f78422..a1e6caf0dba6 100644 --- a/arch/arm/mach-omap2/ti81xx.h +++ b/arch/arm/mach-omap2/ti81xx.h @@ -22,6 +22,15 @@ #define TI81XX_CTRL_BASE TI81XX_SCM_BASE #define TI81XX_PRCM_BASE 0x48180000 +/* + * Adjust TAP register base such that omap3_check_revision accesses the correct + * TI81XX register for checking device ID (it adds 0x204 to tap base while + * TI81XX DEVICE ID register is at offset 0x600 from control base). + */ +#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \ + TI81XX_CONTROL_DEVICE_ID - 0x204) + + #define TI81XX_ARM_INTC_BASE 0x48200000 #endif /* __ASM_ARCH_TI81XX_H */ diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index f6b6c37ac3f4..7c2b4ed38f02 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -1,6 +1,8 @@ /* * OMAP2+ MPU WD_TIMER-specific code * + * Copyright (C) 2012 Texas Instruments, Inc. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -11,10 +13,14 @@ #include <linux/io.h> #include <linux/err.h> -#include "omap_hwmod.h" +#include <linux/platform_data/omap-wd-timer.h> +#include "omap_hwmod.h" +#include "omap_device.h" #include "wd_timer.h" #include "common.h" +#include "prm.h" +#include "soc.h" /* * In order to avoid any assumptions from bootloader regarding WDT @@ -26,9 +32,6 @@ #define OMAP_WDT_WPS 0x34 #define OMAP_WDT_SPR 0x48 -/* Maximum microseconds to wait for OMAP module to softreset */ -#define MAX_MODULE_SOFTRESET_WAIT 10000 - int omap2_wd_timer_disable(struct omap_hwmod *oh) { void __iomem *base; @@ -99,3 +102,32 @@ int omap2_wd_timer_reset(struct omap_hwmod *oh) return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : omap2_wd_timer_disable(oh); } + +static int __init omap_init_wdt(void) +{ + int id = -1; + struct platform_device *pdev; + struct omap_hwmod *oh; + char *oh_name = "wd_timer2"; + char *dev_name = "omap_wdt"; + struct omap_wd_timer_platform_data pdata; + + if (!cpu_class_is_omap2() || of_have_populated_dt()) + return 0; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up wd_timer%d hwmod\n", id); + return -EINVAL; + } + + pdata.read_reset_sources = prm_read_reset_sources; + + pdev = omap_device_build(dev_name, id, oh, &pdata, + sizeof(struct omap_wd_timer_platform_data), + NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", + dev_name, oh->name); + return 0; +} +subsys_initcall(omap_init_wdt); diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h deleted file mode 100644 index 267f43bb2a4e..000000000000 --- a/arch/arm/plat-omap/include/plat/prcm.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/prcm.h - * - * Access definations for use in OMAP24XX clock and power management - * - * Copyright (C) 2005 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem, - * so this file doesn't belong in plat-omap/include/plat. Please - * do not add anything new to this file. - */ - -#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H -#define __ASM_ARM_ARCH_OMAP_PRCM_H - -u32 omap_prcm_get_reset_sources(void); -int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, - const char *name); - -#endif - - - diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index f5db18dbc0f9..477a1d47a64c 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -46,8 +46,8 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> #include <mach/hardware.h> -#include <plat/cpu.h> -#include <plat/prcm.h> + +#include <linux/platform_data/omap-wd-timer.h> #include "omap_wdt.h" @@ -202,8 +202,10 @@ static ssize_t omap_wdt_write(struct file *file, const char __user *data, static long omap_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { + struct omap_wd_timer_platform_data *pdata; struct omap_wdt_dev *wdev; - int new_margin; + u32 rs; + int new_margin, bs; static const struct watchdog_info ident = { .identity = "OMAP Watchdog", .options = WDIOF_SETTIMEOUT, @@ -211,6 +213,7 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, }; wdev = file->private_data; + pdata = wdev->dev->platform_data; switch (cmd) { case WDIOC_GETSUPPORT: @@ -219,17 +222,12 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: return put_user(0, (int __user *)arg); case WDIOC_GETBOOTSTATUS: -#ifdef CONFIG_ARCH_OMAP1 - if (cpu_is_omap16xx()) - return put_user(__raw_readw(ARM_SYSST), - (int __user *)arg); -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - if (cpu_is_omap24xx()) - return put_user(omap_prcm_get_reset_sources(), - (int __user *)arg); -#endif - return put_user(0, (int __user *)arg); + if (!pdata || !pdata->read_reset_sources) + return put_user(0, (int __user *)arg); + rs = pdata->read_reset_sources(); + bs = (rs & (1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT)) ? + WDIOF_CARDRESET : 0; + return put_user(bs, (int __user *)arg); case WDIOC_KEEPALIVE: spin_lock(&wdt_lock); omap_wdt_ping(wdev); diff --git a/include/linux/platform_data/omap-wd-timer.h b/include/linux/platform_data/omap-wd-timer.h new file mode 100644 index 000000000000..d75f5f802d98 --- /dev/null +++ b/include/linux/platform_data/omap-wd-timer.h @@ -0,0 +1,38 @@ +/* + * OMAP2+ WDTIMER-specific function prototypes + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H +#define __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H + +#include <linux/types.h> + +/* + * Standardized OMAP reset source bits + * + * This is a subset of the ones listed in arch/arm/mach-omap2/prm.h + * and are the only ones needed in the watchdog driver. + */ +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 + +/** + * struct omap_wd_timer_platform_data - WDTIMER integration to the host SoC + * @read_reset_sources - fn ptr for the SoC to indicate the last reset cause + * + * The function pointed to by @read_reset_sources must return its data + * in a standard format - search for RST_SRC_ID_SHIFT in + * arch/arm/mach-omap2 + */ +struct omap_wd_timer_platform_data { + u32 (*read_reset_sources)(void); +}; + +#endif |