diff options
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-typec.c | 62 |
1 files changed, 42 insertions, 20 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index 4d2c57f21d76..342a77733207 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -443,14 +443,34 @@ static inline int property_enable(struct rockchip_typec_phy *tcphy, return regmap_write(tcphy->grf_regs, reg->offset, val | mask); } +static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy) +{ + u16 tx_ana_ctrl_reg_1; + + /* + * Select the polarity of the xcvr: + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down + * aux_p) + */ + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + if (!tcphy->flip) + tx_ana_ctrl_reg_1 |= BIT(12); + else + tx_ana_ctrl_reg_1 &= ~BIT(12); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); +} + static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) { + u16 tx_ana_ctrl_reg_1; u16 rdata, rdata2, val; /* disable txda_cal_latch_en for rewrite the calibration values */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata & 0xdfff; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 &= ~BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and @@ -472,9 +492,8 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) * Activate this signal for 1 clock cycle to sample new calibration * values. */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata | 0x2000; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); usleep_range(150, 200); /* set TX Voltage Level and TX Deemphasis to 0 */ @@ -482,8 +501,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) /* re-enable decap */ writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); - writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(3); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(4); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_5); @@ -494,8 +515,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); /* re-enables Bandgap reference for LDO */ - writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(7); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(8); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * re-enables the transmitter pre-driver, driver data selection MUX, @@ -505,17 +528,15 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); /* - * BIT 12: Controls auxda_polarity, which selects the polarity of the - * xcvr: - * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull - * down aux_m) - * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down - * aux_p) + * Do some magic undocumented stuff, some of which appears to + * undo the "re-enables Bandgap reference for LDO" above. */ - val = 0xa078; - if (!tcphy->flip) - val |= BIT(12); - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(15); + tx_ana_ctrl_reg_1 &= ~BIT(8); + tx_ana_ctrl_reg_1 &= ~BIT(7); + tx_ana_ctrl_reg_1 |= BIT(6); + tx_ana_ctrl_reg_1 |= BIT(5); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_3); writel(0, tcphy->base + TX_ANA_CTRL_REG_4); @@ -555,6 +576,7 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) reset_control_deassert(tcphy->tcphy_rst); property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + tcphy_dp_aux_set_flip(tcphy); tcphy_cfg_24m(tcphy); |