diff options
| -rw-r--r-- | drivers/net/phy/dp83td510.c | 23 |
1 files changed, 5 insertions, 18 deletions
diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c index 3cd9a77f9532..d7616b13c594 100644 --- a/drivers/net/phy/dp83td510.c +++ b/drivers/net/phy/dp83td510.c @@ -12,6 +12,11 @@ /* MDIO_MMD_VEND2 registers */ #define DP83TD510E_PHY_STS 0x10 +/* Bit 7 - mii_interrupt, active high. Clears on read. + * Note: Clearing does not necessarily deactivate IRQ pin if interrupts pending. + * This differs from the DP83TD510E datasheet (2020) which states this bit + * clears on write 0. + */ #define DP83TD510E_STS_MII_INT BIT(7) #define DP83TD510E_LINK_STATUS BIT(0) @@ -53,12 +58,6 @@ static int dp83td510_config_intr(struct phy_device *phydev) int ret; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { - /* Clear any pending interrupts */ - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, - 0x0); - if (ret) - return ret; - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1, DP83TD510E_INT1_LINK_EN); @@ -81,10 +80,6 @@ static int dp83td510_config_intr(struct phy_device *phydev) DP83TD510E_GENCFG_INT_EN); if (ret) return ret; - - /* Clear any pending interrupts */ - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, - 0x0); } return ret; @@ -94,14 +89,6 @@ static irqreturn_t dp83td510_handle_interrupt(struct phy_device *phydev) { int ret; - ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS); - if (ret < 0) { - phy_error(phydev); - return IRQ_NONE; - } else if (!(ret & DP83TD510E_STS_MII_INT)) { - return IRQ_NONE; - } - /* Read the current enabled interrupts */ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1); if (ret < 0) { |