diff options
| -rw-r--r-- | Documentation/devicetree/bindings/sound/sgtl5000.txt | 9 | ||||
| -rw-r--r-- | sound/soc/codecs/sgtl5000.c | 19 |
2 files changed, 27 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 5666da7b8605..7a73a9d62015 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -26,6 +26,15 @@ Optional properties: If this node is not mentioned or the value is unknown, then the value is set to 1.25V. +- lrclk-strength: the LRCLK pad strength. Possible values are: +0, 1, 2 and 3 as per the table below: + +VDDIO 1.8V 2.5V 3.3V +0 = Disable +1 = 1.66 mA 2.87 mA 4.02 mA +2 = 3.33 mA 5.74 mA 8.03 mA +3 = 4.99 mA 8.61 mA 12.05 mA + Example: codec: sgtl5000@0a { diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 1589325855bc..5a2702edeb77 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -99,6 +99,13 @@ enum sgtl5000_micbias_resistor { SGTL5000_MICBIAS_8K = 8, }; +enum { + I2S_LRCLK_STRENGTH_DISABLE, + I2S_LRCLK_STRENGTH_LOW, + I2S_LRCLK_STRENGTH_MEDIUM, + I2S_LRCLK_STRENGTH_HIGH, +}; + /* sgtl5000 private structure in codec */ struct sgtl5000_priv { int sysclk; /* sysclk rate */ @@ -111,6 +118,7 @@ struct sgtl5000_priv { int revision; u8 micbias_resistor; u8 micbias_voltage; + u8 lrclk_strength; }; /* @@ -1089,6 +1097,7 @@ static int sgtl5000_enable_regulators(struct i2c_client *client) static int sgtl5000_probe(struct snd_soc_codec *codec) { int ret; + u16 reg; struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); /* power up sgtl5000 */ @@ -1118,7 +1127,8 @@ static int sgtl5000_probe(struct snd_soc_codec *codec) SGTL5000_DAC_MUTE_RIGHT | SGTL5000_DAC_MUTE_LEFT); - snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f); + reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f); + snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, reg); snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL, SGTL5000_HP_ZCD_EN | @@ -1347,6 +1357,13 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, } } + sgtl5000->lrclk_strength = I2S_LRCLK_STRENGTH_LOW; + if (!of_property_read_u32(np, "lrclk-strength", &value)) { + if (value > I2S_LRCLK_STRENGTH_HIGH) + value = I2S_LRCLK_STRENGTH_LOW; + sgtl5000->lrclk_strength = value; + } + /* Ensure sgtl5000 will start with sane register values */ sgtl5000_fill_defaults(client); |