diff options
82 files changed, 2501 insertions, 6038 deletions
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml index 26ea66834ae2..336bc352579a 100644 --- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml +++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml @@ -49,7 +49,10 @@ properties: interrupt-controller: description: This property applies if either keypad,num-rows lower than 8 or - keypad,num-columns lower than 10. + keypad,num-columns lower than 10. This property is optional if + keypad,num-rows or keypad,num-columns are not specified as the + device is then configured to be used purely for gpio during which + interrupts may or may not be utilized. '#interrupt-cells': const: 2 @@ -65,13 +68,23 @@ properties: minItems: 1 maxItems: 2 +dependencies: + keypad,num-rows: + - linux,keymap + - keypad,num-columns + keypad,num-columns: + - linux,keymap + - keypad,num-rows + linux,keymap: + - keypad,num-rows + - keypad,num-columns + - interrupts + interrupt-controller: + - interrupts + required: - compatible - reg - - interrupts - - keypad,num-rows - - keypad,num-columns - - linux,keymap unevaluatedProperties: false @@ -108,4 +121,19 @@ examples: >; }; }; + + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + gpio@34 { + compatible = "adi,adp5588"; + reg = <0x34>; + + #gpio-cells = <2>; + gpio-controller; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt deleted file mode 100644 index a644408b33b8..000000000000 --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ /dev/null @@ -1,50 +0,0 @@ -Rotary encoder DT bindings - -Required properties: -- gpios: a spec for at least two GPIOs to be used, most significant first - -Optional properties: -- linux,axis: the input subsystem axis to map to this rotary encoder. - Defaults to 0 (ABS_X / REL_X) -- rotary-encoder,steps: Number of steps in a full turnaround of the - encoder. Only relevant for absolute axis. Defaults to 24 which is a - typical value for such devices. -- rotary-encoder,relative-axis: register a relative axis rather than an - absolute one. Relative axis will only generate +1/-1 events on the input - device, hence no steps need to be passed. -- rotary-encoder,rollover: Automatic rollover when the rotary value becomes - greater than the specified steps or smaller than 0. For absolute axis only. -- rotary-encoder,steps-per-period: Number of steps (stable states) per period. - The values have the following meaning: - 1: Full-period mode (default) - 2: Half-period mode - 4: Quarter-period mode -- wakeup-source: Boolean, rotary encoder can wake up the system. -- rotary-encoder,encoding: String, the method used to encode steps. - Supported are "gray" (the default and more common) and "binary". - -Deprecated properties: -- rotary-encoder,half-period: Makes the driver work on half-period mode. - This property is deprecated. Instead, a 'steps-per-period ' value should - be used, such as "rotary-encoder,steps-per-period = <2>". - -See Documentation/input/devices/rotary-encoder.rst for more information. - -Example: - - rotary@0 { - compatible = "rotary-encoder"; - gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ - linux,axis = <0>; /* REL_X */ - rotary-encoder,encoding = "gray"; - rotary-encoder,relative-axis; - }; - - rotary@1 { - compatible = "rotary-encoder"; - gpios = <&gpio 21 0>, <&gpio 22 0>; - linux,axis = <1>; /* ABS_Y */ - rotary-encoder,steps = <24>; - rotary-encoder,encoding = "binary"; - rotary-encoder,rollover; - }; diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.yaml b/Documentation/devicetree/bindings/input/rotary-encoder.yaml new file mode 100644 index 000000000000..e315aab7f584 --- /dev/null +++ b/Documentation/devicetree/bindings/input/rotary-encoder.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/rotary-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rotary encoder + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + See Documentation/input/devices/rotary-encoder.rst for more information. + +properties: + compatible: + const: rotary-encoder + + gpios: + minItems: 2 + + linux,axis: + default: 0 + description: + the input subsystem axis to map to this rotary encoder. + Defaults to 0 (ABS_X / REL_X) + + rotary-encoder,steps: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 24 + description: + Number of steps in a full turnaround of the + encoder. Only relevant for absolute axis. Defaults to 24 which is a + typical value for such devices. + + rotary-encoder,relative-axis: + $ref: /schemas/types.yaml#/definitions/flag + description: + register a relative axis rather than an + absolute one. Relative axis will only generate +1/-1 events on the input + device, hence no steps need to be passed. + + rotary-encoder,rollover: + $ref: /schemas/types.yaml#/definitions/int32 + description: + Automatic rollover when the rotary value becomes + greater than the specified steps or smaller than 0. For absolute axis only. + + rotary-encoder,steps-per-period: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + enum: [1, 2, 4] + description: | + Number of steps (stable states) per period. + The values have the following meaning: + 1: Full-period mode (default) + 2: Half-period mode + 4: Quarter-period mode + + wakeup-source: true + + rotary-encoder,encoding: + $ref: /schemas/types.yaml#/definitions/string + description: the method used to encode steps. + enum: [gray, binary] + + rotary-encoder,half-period: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true + description: + Makes the driver work on half-period mode. + This property is deprecated. Instead, a 'steps-per-period ' value should + be used, such as "rotary-encoder,steps-per-period = <2>". + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + rotary { + compatible = "rotary-encoder"; + gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,encoding = "gray"; + rotary-encoder,relative-axis; + }; + diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt deleted file mode 100644 index afa38dc069f0..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt +++ /dev/null @@ -1,71 +0,0 @@ -* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C) - -Required properties: -- compatible : for SPI slave, use "adi,ad7879" - for I2C slave, use "adi,ad7879-1" -- reg : SPI chipselect/I2C slave address - See spi-bus.txt for more SPI slave properties -- interrupts : touch controller interrupt -- touchscreen-max-pressure : maximum reported pressure -- adi,resistance-plate-x : total resistance of X-plate (for pressure - calculation) -Optional properties: -- touchscreen-swapped-x-y : X and Y axis are swapped (boolean) -- adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us) - 13 : 2.560ms - 14 : 3.584ms - 15 : 4.096ms - This property has to be a '/bits/ 8' value -- adi,acquisition-time : 0: 2us - 1: 4us - 2: 8us - 3: 16us - This property has to be a '/bits/ 8' value -- adi,median-filter-size : 0: disabled - 1: 4 measurements - 2: 8 measurements - 3: 16 measurements - This property has to be a '/bits/ 8' value -- adi,averaging : 0: 2 middle values (1 if median disabled) - 1: 4 middle values - 2: 8 middle values - 3: 16 values - This property has to be a '/bits/ 8' value -- adi,conversion-interval: : 0 : convert one time only - 1-255: 515us + val * 35us (up to 9.440ms) - This property has to be a '/bits/ 8' value -- gpio-controller : Switch AUX/VBAT/GPIO pin to GPIO mode - -Example: - - touchscreen0@2c { - compatible = "adi,ad7879-1"; - reg = <0x2c>; - interrupt-parent = <&gpio1>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - touchscreen-max-pressure = <4096>; - adi,resistance-plate-x = <120>; - adi,first-conversion-delay = /bits/ 8 <3>; - adi,acquisition-time = /bits/ 8 <1>; - adi,median-filter-size = /bits/ 8 <2>; - adi,averaging = /bits/ 8 <1>; - adi,conversion-interval = /bits/ 8 <255>; - }; - - touchscreen1@1 { - compatible = "adi,ad7879"; - spi-max-frequency = <5000000>; - reg = <1>; - spi-cpol; - spi-cpha; - gpio-controller; - interrupt-parent = <&gpio1>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - touchscreen-max-pressure = <4096>; - adi,resistance-plate-x = <120>; - adi,first-conversion-delay = /bits/ 8 <3>; - adi,acquisition-time = /bits/ 8 <1>; - adi,median-filter-size = /bits/ 8 <2>; - adi,averaging = /bits/ 8 <1>; - adi,conversion-interval = /bits/ 8 <255>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml new file mode 100644 index 000000000000..caa5fa3cc3f1 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7879.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + description: | + for SPI slave, use "adi,ad7879" + for I2C slave, use "adi,ad7879-1" + enum: + - adi,ad7879 + - adi,ad7879-1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + touchscreen-max-pressure: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum reported pressure + + adi,resistance-plate-x: + $ref: /schemas/types.yaml#/definitions/uint32 + description: total resistance of X-plate (for pressure calculation) + + touchscreen-swapped-x-y: + $ref: /schemas/types.yaml#/definitions/flag + description: X and Y axis are swapped (boolean) + + adi,first-conversion-delay: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + minimum: 0 + maximum: 15 + description: | + 0-12: In 128us steps (starting with 128us) + 13 : 2.560ms + 14 : 3.584ms + 15 : 4.096ms + This property has to be a '/bits/ 8' value + + adi,acquisition-time: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + enum: [0, 1, 2, 3] + description: | + 0: 2us + 1: 4us + 2: 8us + 3: 16us + This property has to be a '/bits/ 8' value + + adi,median-filter-size: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + enum: [0, 1, 2, 3] + description: | + 0: disabled + 1: 4 measurements + 2: 8 measurements + 3: 16 measurements + This property has to be a '/bits/ 8' value + + adi,averaging: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + enum: [0, 1, 2, 3] + description: | + 0: 2 middle values (1 if median disabled) + 1: 4 middle values + 2: 8 middle values + 3: 16 values + This property has to be a '/bits/ 8' value + + adi,conversion-interval: + $ref: /schemas/types.yaml#/definitions/uint8 + default: 0 + description: | + 0 : convert one time only + 1-255: 515us + val * 35us (up to 9.440ms) + This property has to be a '/bits/ 8' value + + gpio-controller: true + + "#gpio-cells": + const: 1 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen0@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen1@1 { + compatible = "adi,ad7879"; + reg = <1>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt deleted file mode 100644 index 399c87782935..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt +++ /dev/null @@ -1,107 +0,0 @@ -Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046 -SPI driven touch screen controllers. - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in - - Documentation/devicetree/bindings/spi/spi-bus.txt - -must be specified. - -Additional required properties: - - compatible Must be one of the following, depending on the - model: - "ti,tsc2046" - "ti,ads7843" - "ti,ads7845" - "ti,ads7846" - "ti,ads7873" - - interrupts An interrupt node describing the IRQ line the chip's - !PENIRQ pin is connected to. - vcc-supply A regulator node for the supply voltage. - - -Optional properties: - - ti,vref-delay-usecs vref supply delay in usecs, 0 for - external vref (u16). - ti,vref-mv The VREF voltage, in millivolts (u16). - Set to 0 to use internal references - (ADS7846). - ti,keep-vref-on set to keep vref on for differential - measurements as well - ti,settle-delay-usec Settling time of the analog signals; - a function of Vcc and the capacitance - on the X/Y drivers. If set to non-zero, - two samples are taken with settle_delay - us apart, and the second one is used. - ~150 uSec with 0.01uF caps (u16). - ti,penirq-recheck-delay-usecs If set to non-zero, after samples are - taken this delay is applied and penirq - is rechecked, to help avoid false - events. This value is affected by the - material used to build the touch layer - (u16). - ti,x-plate-ohms Resistance of the X-plate, - in Ohms (u16). - ti,y-plate-ohms Resistance of the Y-plate, - in Ohms (u16). - ti,x-min Minimum value on the X axis (u16). - ti,y-min Minimum value on the Y axis (u16). - ti,debounce-tol Tolerance used for filtering (u16). - ti,debounce-rep Additional consecutive good readings - required after the first two (u16). - ti,pendown-gpio-debounce Platform specific debounce time for the - pendown-gpio (u32). - pendown-gpio GPIO handle describing the pin the !PENIRQ - line is connected to. - ti,hsync-gpios GPIO line to poll for hsync - wakeup-source use any event on touchscreen as wakeup event. - (Legacy property support: "linux,wakeup") - touchscreen-size-x General touchscreen binding, see [1]. - touchscreen-size-y General touchscreen binding, see [1]. - touchscreen-max-pressure General touchscreen binding, see [1]. - touchscreen-min-pressure General touchscreen binding, see [1]. - touchscreen-average-samples General touchscreen binding, see [1]. - touchscreen-inverted-x General touchscreen binding, see [1]. - touchscreen-inverted-y General touchscreen binding, see [1]. - touchscreen-swapped-x-y General touchscreen binding, see [1]. - -[1] All general touchscreen properties are described in - Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt. - -Deprecated properties: - - ti,swap-xy swap x and y axis - ti,x-max Maximum value on the X axis (u16). - ti,y-max Maximum value on the Y axis (u16). - ti,pressure-min Minimum reported pressure value - (threshold) - u16. - ti,pressure-max Maximum reported pressure value (u16). - ti,debounce-max Max number of additional readings per - sample (u16). - -Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: - - spi_controller { - tsc2046@0 { - reg = <0>; /* CS0 */ - compatible = "ti,tsc2046"; - interrupt-parent = <&gpio1>; - interrupts = <8 0>; /* BOOT6 / GPIO 8 */ - spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 0>; - vcc-supply = <®_vcc3>; - - ti,x-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <8000>; - ti,y-min = /bits/ 16 <0>; - ti,y-max = /bits/ 16 <4800>; - ti,x-plate-ohms = /bits/ 16 <40>; - ti,pressure-max = /bits/ 16 <255>; - - wakeup-source; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml index 8cf371b99f19..e4dbbafb3779 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml @@ -666,7 +666,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - touch@56 { + touchscreen@56 { compatible = "azoteq,iqs7210a"; reg = <0x56>; irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; @@ -704,7 +704,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - touch@56 { + touchscreen@56 { compatible = "azoteq,iqs7211e"; reg = <0x56>; irq-gpios = <&gpio 4 (GPIO_ACTIVE_LOW | diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt deleted file mode 100644 index ca304357c374..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt +++ /dev/null @@ -1,34 +0,0 @@ -* Toradex Colibri VF50 Touchscreen driver - -Required Properties: -- compatible must be toradex,vf50-touchscreen -- io-channels: adc channels being used by the Colibri VF50 module - IIO ADC for Y-, X-, Y+, X+ connections -- xp-gpios: FET gate driver for input of X+ -- xm-gpios: FET gate driver for input of X- -- yp-gpios: FET gate driver for input of Y+ -- ym-gpios: FET gate driver for input of Y- -- interrupts: pen irq interrupt for touch detection, signal from X plate -- pinctrl-names: "idle", "default" -- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide - pull-up resistor on X+, X-. -- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux -- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values - -Example: - - touchctrl: vf50_touchctrl { - compatible = "toradex,vf50-touchscreen"; - io-channels = <&adc1 0>,<&adc0 0>, - <&adc0 1>,<&adc1 2>; - xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; - yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&gpio0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "idle","default"; - pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>; - pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>; - vf50-ts-min-pressure = <200>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 51d48d4130d3..70a922e213f2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -126,7 +126,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - edt-ft5x06@38 { + touchscreen@38 { compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&gpio2>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index 2a2d86cfd104..eb4992f708b7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -69,7 +69,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>; - gt928@5d { + touchscreen@5d { compatible = "goodix,gt928"; reg = <0x5d>; interrupt-parent = <&gpio>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml new file mode 100644 index 000000000000..604921733d2c --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti,ads7843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI's SPI driven touch screen controllers + +maintainers: + - Alexander Stein <alexander.stein@ew.tq-group.com> + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + - Marek Vasut <marex@denx.de> + +description: + TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046 SPI driven touch screen + controllers. + +properties: + compatible: + enum: + - ti,ads7843 + - ti,ads7845 + - ti,ads7846 + - ti,ads7873 + - ti,tsc2046 + + interrupts: + maxItems: 1 + + pendown-gpio: + maxItems: 1 + description: + GPIO handle describing the pin the !PENIRQ line is connected to. + + vcc-supply: + description: + A regulator node for the supply voltage. + + wakeup-source: true + + ti,debounce-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Max number of additional readings per sample. + + ti,debounce-rep: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Additional consecutive good readings required after the first two. + + ti,debounce-tol: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Tolerance used for filtering. + + ti,hsync-gpios: + maxItems: 1 + description: + GPIO line to poll for hsync. + + ti,keep-vref-on: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set to keep Vref on for differential measurements as well. + + ti,pendown-gpio-debounce: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Platform specific debounce time for the pendown-gpio. + + ti,penirq-recheck-delay-usecs: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + If set to non-zero, after samples are taken this delay is applied and + penirq is rechecked, to help avoid false events. This value is + affected by the material used to build the touch layer. + + ti,pressure-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Maximum reported pressure value. + + ti,pressure-min: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Minimum reported pressure value (threshold). + + ti,settle-delay-usec: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Settling time of the analog signals; a function of Vcc and the + capacitance on the X/Y drivers. If set to non-zero, two samples are + taken with settle_delay us apart, and the second one is used. ~150 + uSec with 0.01uF caps. + + ti,swap-xy: + deprecated: true + $ref: /schemas/types.yaml#/definitions/flag + description: + Swap x and y axis. + + ti,vref-delay-usecs: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Vref supply delay in usecs, 0 for external Vref. + + ti,vref-mv: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + The VREF voltage, in millivolts. + Set to 0 to use internal references (ADS7846). + + ti,x-plate-ohms: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Resistance of the X-plate, in Ohms. + + ti,x-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Maximum value on the X axis. + + ti,x-min: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Minimum value on the X axis. + + ti,y-plate-ohms: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Resistance of the Y-plate, in Ohms. + + ti,y-max: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Maximum value on the Y axis. + + ti,y-min: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Minimum value on the Y axis. + +required: + - compatible + - reg + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi{ + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "ti,tsc2046"; + reg = <0>; /* CS0 */ + interrupt-parent = <&gpio1>; + interrupts = <8 0>; /* BOOT6 / GPIO 8 */ + pendown-gpio = <&gpio1 8 0>; + spi-max-frequency = <1000000>; + vcc-supply = <®_vcc3>; + wakeup-source; + + ti,pressure-max = /bits/ 16 <255>; + ti,x-max = /bits/ 16 <8000>; + ti,x-min = /bits/ 16 <0>; + ti,x-plate-ohms = /bits/ 16 <40>; + ti,y-max = /bits/ 16 <4800>; + ti,y-min = /bits/ 16 <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml new file mode 100644 index 000000000000..5094c5183c74 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/toradex,vf50-touchscreen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toradex Colibri VF50 Touchscreen + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + - Sanchayan Maity <maitysanchayan@gmail.com> + +properties: + compatible: + const: toradex,vf50-touchscreen + + interrupts: + maxItems: 1 + + io-channels: + maxItems: 4 + description: + adc channels being used by the Colibri VF50 module + IIO ADC for Y-, X-, Y+, X+ connections + + xp-gpios: + description: FET gate driver for input of X+ + + xm-gpios: + description: FET gate driver for input of X- + + yp-gpios: + description: FET gate driver for input of Y+ + + ym-gpios: + description: FET gate driver for input of Y- + + vf50-ts-min-pressure: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 50 + maximum: 2000 + description: pressure level at which to stop measuring X/Y values + +required: + - compatible + - io-channels + - xp-gpios + - xm-gpios + - yp-gpios + - ym-gpios + - interrupts + - vf50-ts-min-pressure + +allOf: + - $ref: touchscreen.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + touchscreen { + compatible = "toradex,vf50-touchscreen"; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + io-channels = <&adc1 0>, <&adc0 0>, <&adc0 1>, <&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "idle", "default"; + pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>; + pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>; + vf50-ts-min-pressure = <200>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml index b1507463a03e..3f663ce3e44e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml @@ -16,6 +16,7 @@ maintainers: allOf: - $ref: touchscreen.yaml# + - $ref: ../input.yaml# properties: $nodename: @@ -79,6 +80,15 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2] + linux,keycodes: + description: + This property specifies an array of keycodes assigned to the + touch-keys that can be present in some touchscreen configurations. + If the touch-keys are enabled, controller firmware will assign some + touch sense lines to those keys. + minItems: 1 + maxItems: 8 + touchscreen-size-x: true touchscreen-size-y: true touchscreen-fuzz-x: true diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 128b55be67b7..27f1797be963 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -25,7 +25,7 @@ List of legacy properties and respective binding document 2. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt 3. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt Documentation/devicetree/bindings/mfd/tc3589x.txt - Documentation/devicetree/bindings/input/touchscreen/ads7846.txt + Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml 4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml 5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml 6. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt diff --git a/MAINTAINERS b/MAINTAINERS index 42bb30fdc244..01849d68e4ab 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11198,10 +11198,17 @@ F: Documentation/devicetree/bindings/serio/ F: Documentation/input/ F: drivers/input/ F: include/dt-bindings/input/ +F: include/linux/gameport.h +F: include/linux/i8042.h F: include/linux/input.h F: include/linux/input/ +F: include/linux/libps2.h +F: include/linux/serio.h +F: include/uapi/linux/gameport.h F: include/uapi/linux/input-event-codes.h F: include/uapi/linux/input.h +F: include/uapi/linux/serio.h +F: include/uapi/linux/uinput.h INPUT MULTITOUCH (MT) PROTOCOL M: Henrik Rydberg <rydberg@bitmath.org> @@ -25532,7 +25539,6 @@ F: tools/net/ynl/ YEALINK PHONE DRIVER M: Henk Vergonet <Henk.Vergonet@gmail.com> -L: usbb2k-api-dev@nongnu.org S: Maintained F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 452bf7aac1fa..33533e35720f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -378,38 +378,56 @@ static const uint32_t spitz_keymap[] = { KEY(6, 8, KEY_RIGHT), }; -static const struct matrix_keymap_data spitz_keymap_data = { - .keymap = spitz_keymap, - .keymap_size = ARRAY_SIZE(spitz_keymap), +static const struct software_node_ref_args spitz_mkp_row_gpios[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 12, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 17, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 91, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 34, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 36, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 38, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 39, GPIO_ACTIVE_HIGH), }; -static const uint32_t spitz_row_gpios[] = - { 12, 17, 91, 34, 36, 38, 39 }; -static const uint32_t spitz_col_gpios[] = - { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 }; - -static struct matrix_keypad_platform_data spitz_mkp_pdata = { - .keymap_data = &spitz_keymap_data, - .row_gpios = spitz_row_gpios, - .col_gpios = spitz_col_gpios, - .num_row_gpios = ARRAY_SIZE(spitz_row_gpios), - .num_col_gpios = ARRAY_SIZE(spitz_col_gpios), - .col_scan_delay_us = 10, - .debounce_ms = 10, - .wakeup = 1, +static const struct software_node_ref_args spitz_mkp_col_gpios[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 88, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 23, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 24, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 25, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 26, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 27, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 52, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 103, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 107, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 108, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 114, GPIO_ACTIVE_HIGH), }; -static struct platform_device spitz_mkp_device = { +static const struct property_entry spitz_mkp_properties[] = { + PROPERTY_ENTRY_U32_ARRAY("linux,keymap", spitz_keymap), + PROPERTY_ENTRY_REF_ARRAY("row-gpios", spitz_mkp_row_gpios), + PROPERTY_ENTRY_REF_ARRAY("col-gpios", spitz_mkp_col_gpios), + PROPERTY_ENTRY_U32("col-scan-delay-us", 10), + PROPERTY_ENTRY_U32("debounce-delay-ms", 10), + PROPERTY_ENTRY_BOOL("wakeup-source"), + { } +}; + +static const struct platform_device_info spitz_mkp_info __initconst = { .name = "matrix-keypad", - .id = -1, - .dev = { - .platform_data = &spitz_mkp_pdata, - }, + .id = PLATFORM_DEVID_NONE, + .properties = spitz_mkp_properties, }; + static void __init spitz_mkp_init(void) { - platform_device_register(&spitz_mkp_device); + struct platform_device *pd; + int err; + + pd = platform_device_register_full(&spitz_mkp_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("failed to create keypad device: %d\n", err); } #else static inline void spitz_mkp_init(void) {} @@ -419,45 +437,82 @@ static inline void spitz_mkp_init(void) {} * GPIO keys ******************************************************************************/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button spitz_gpio_keys[] = { - { - .type = EV_PWR, - .code = KEY_SUSPEND, - .gpio = SPITZ_GPIO_ON_KEY, - .desc = "On Off", - .wakeup = 1, - }, - /* Two buttons detecting the lid state */ - { - .type = EV_SW, - .code = 0, - .gpio = SPITZ_GPIO_SWA, - .desc = "Display Down", - }, - { - .type = EV_SW, - .code = 1, - .gpio = SPITZ_GPIO_SWB, - .desc = "Lid Closed", - }, +static const struct software_node spitz_gpio_keys_node = { + .name = "spitz-gpio-keys", }; -static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = { - .buttons = spitz_gpio_keys, - .nbuttons = ARRAY_SIZE(spitz_gpio_keys), +static const struct property_entry spitz_suspend_key_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_PWR), + PROPERTY_ENTRY_U32("linux,code", KEY_SUSPEND), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_ON_KEY, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "On Off"), + PROPERTY_ENTRY_BOOL("wakeup-source"), + { } }; -static struct platform_device spitz_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &spitz_gpio_keys_platform_data, - }, +static const struct software_node spitz_suspend_key_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_suspend_key_props, +}; + +static const struct property_entry spitz_sw1_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_SW), + PROPERTY_ENTRY_U32("linux,code", 0), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_SWA, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "Display Down"), + { } +}; + +static const struct software_node spitz_sw1_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_sw1_props, +}; + +static const struct property_entry spitz_sw2_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_SW), + PROPERTY_ENTRY_U32("linux,code", 1), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_SWB, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "Lid Closed"), + { } +}; + +static const struct software_node spitz_sw2_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_sw2_props, +}; + +static const struct software_node *spitz_gpio_keys_swnodes[] = { + &spitz_gpio_keys_node, + &spitz_suspend_key_node, + &spitz_sw1_node, + &spitz_sw2_node, + NULL }; static void __init spitz_keys_init(void) { - platform_device_register(&spitz_gpio_keys_device); + struct platform_device_info keys_info = { + .name = "gpio-keys", + .id = PLATFORM_DEVID_NONE, + }; + struct platform_device *pd; + int err; + + err = software_node_register_node_group(spitz_gpio_keys_swnodes); + if (err) { + pr_err("failed to register gpio-keys software nodes: %d\n", err); + return; + } + + keys_info.fwnode = software_node_fwnode(&spitz_gpio_keys_node); + + pd = platform_device_register_full(&keys_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("failed to create gpio-keys device: %d\n", err); } #else static inline void spitz_keys_init(void) {} diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index a8ce3d140722..eb4906552ac8 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -498,6 +498,13 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer, struct input_event event; int retval = 0; + /* + * Limit amount of data we inject into the input subsystem so that + * we do not hold evdev->mutex for too long. 4096 bytes corresponds + * to 170 input events. + */ + count = min(count, 4096); + if (count != 0 && count < input_event_size()) return -EINVAL; diff --git a/drivers/input/input.c b/drivers/input/input.c index 19ea1888da9f..47fac29cf7c3 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -2221,7 +2221,7 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) mt_slots = dev->mt->num_slots; } else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) { mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum - - dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1, + dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1; mt_slots = clamp(mt_slots, 2, 32); } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { mt_slots = 2; diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c index de1fa4cf291b..02713e624df1 100644 --- a/drivers/input/joystick/adc-joystick.c +++ b/drivers/input/joystick/adc-joystick.c @@ -132,7 +132,6 @@ static void adc_joystick_cleanup(void *data) static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) { struct adc_joystick_axis *axes = joy->axes; - struct fwnode_handle *child; s32 range[2], fuzz, flat; unsigned int num_axes; int error, i; @@ -149,31 +148,30 @@ static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) return -EINVAL; } - device_for_each_child_node(dev, child) { + device_for_each_child_node_scoped(dev, child) { error = fwnode_property_read_u32(child, "reg", &i); if (error) { dev_err(dev, "reg invalid or missing\n"); - goto err_fwnode_put; + return error; } if (i >= num_axes) { - error = -EINVAL; dev_err(dev, "No matching axis for reg %d\n", i); - goto err_fwnode_put; + return -EINVAL; } error = fwnode_property_read_u32(child, "linux,code", &axes[i].code); if (error) { dev_err(dev, "linux,code invalid or missing\n"); - goto err_fwnode_put; + return error; } error = fwnode_property_read_u32_array(child, "abs-range", range, 2); if (error) { dev_err(dev, "abs-range invalid or missing\n"); - goto err_fwnode_put; + return error; } if (range[0] > range[1]) { @@ -193,10 +191,6 @@ static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) } return 0; - -err_fwnode_put: - fwnode_handle_put(child); - return error; } diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 1c3fef7d34af..721ab69e84ac 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -421,18 +421,6 @@ config KEYBOARD_MAX7359 To compile this driver as a module, choose M here: the module will be called max7359_keypad. -config KEYBOARD_MCS - tristate "MELFAS MCS Touchkey" - depends on I2C - help - Say Y here if you have the MELFAS MCS5000/5080 touchkey controller - chip in your system. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called mcs_touchkey. - config KEYBOARD_MPR121 tristate "Freescale MPR121 Touchkey" depends on I2C @@ -496,17 +484,6 @@ config KEYBOARD_NEWTON To compile this driver as a module, choose M here: the module will be called newtonkbd. -config KEYBOARD_NOMADIK - tristate "ST-Ericsson Nomadik SKE keyboard" - depends on (ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST) - select INPUT_MATRIXKMAP - help - Say Y here if you want to use a keypad provided on the SKE controller - used on the Ux500 and Nomadik platforms - - To compile this driver as a module, choose M here: the - module will be called nmk-ske-keypad. - config KEYBOARD_NSPIRE tristate "TI-NSPIRE built-in keyboard" depends on ARCH_NSPIRE && OF diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 624c90adde89..1e0721c30709 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -42,12 +42,10 @@ obj-$(CONFIG_KEYBOARD_LPC32XX) += lpc32xx-keys.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o -obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o obj-$(CONFIG_KEYBOARD_MT6779) += mt6779-keypad.o obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o obj-$(CONFIG_KEYBOARD_NSPIRE) += nspire-keypad.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o diff --git a/drivers/input/keyboard/adc-keys.c b/drivers/input/keyboard/adc-keys.c index bf72ab8df817..f1753207429d 100644 --- a/drivers/input/keyboard/adc-keys.c +++ b/drivers/input/keyboard/adc-keys.c @@ -66,7 +66,6 @@ static void adc_keys_poll(struct input_dev *input) static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st) { struct adc_keys_button *map; - struct fwnode_handle *child; int i; st->num_keys = device_get_child_node_count(dev); @@ -80,11 +79,10 @@ static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st) return -ENOMEM; i = 0; - device_for_each_child_node(dev, child) { + device_for_each_child_node_scoped(dev, child) { if (fwnode_property_read_u32(child, "press-threshold-microvolt", &map[i].voltage)) { dev_err(dev, "Key with invalid or missing voltage\n"); - fwnode_handle_put(child); return -EINVAL; } map[i].voltage /= 1000; @@ -92,7 +90,6 @@ static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st) if (fwnode_property_read_u32(child, "linux,code", &map[i].keycode)) { dev_err(dev, "Key with invalid or missing linux,code\n"); - fwnode_handle_put(child); return -EINVAL; } diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 1b0279393df4..d25d63a807f2 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -188,6 +188,7 @@ struct adp5588_kpad { u32 cols; u32 unlock_keys[2]; int nkeys_unlock; + bool gpio_only; unsigned short keycode[ADP5588_KEYMAPSIZE]; unsigned char gpiomap[ADP5588_MAXGPIO]; struct gpio_chip gc; @@ -221,15 +222,13 @@ static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned int off) unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); int val; - mutex_lock(&kpad->gpio_lock); + guard(mutex)(&kpad->gpio_lock); if (kpad->dir[bank] & bit) val = kpad->dat_out[bank]; else val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank); - mutex_unlock(&kpad->gpio_lock); - return !!(val & bit); } @@ -240,7 +239,7 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); - mutex_lock(&kpad->gpio_lock); + guard(mutex)(&kpad->gpio_lock); if (val) kpad->dat_out[bank] |= bit; @@ -248,8 +247,6 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, kpad->dat_out[bank] &= ~bit; adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, kpad->dat_out[bank]); - - mutex_unlock(&kpad->gpio_lock); } static int adp5588_gpio_set_config(struct gpio_chip *chip, unsigned int off, @@ -259,7 +256,6 @@ static int adp5588_gpio_set_config(struct gpio_chip *chip, unsigned int off, unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); bool pull_disable; - int ret; switch (pinconf_to_config_param(config)) { case PIN_CONFIG_BIAS_PULL_UP: @@ -272,19 +268,15 @@ static int adp5588_gpio_set_config(struct gpio_chip *chip, unsigned int off, return -ENOTSUPP; } - mutex_lock(&kpad->gpio_lock); + guard(mutex)(&kpad->gpio_lock); if (pull_disable) kpad->pull_dis[bank] |= bit; else kpad->pull_dis[bank] &= bit; - ret = adp5588_write(kpad->client, GPIO_PULL1 + bank, - kpad->pull_dis[bank]); - - mutex_unlock(&kpad->gpio_lock); - - return ret; + return adp5588_write(kpad->client, GPIO_PULL1 + bank, + kpad->pull_dis[bank]); } static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned int off) @@ -292,16 +284,11 @@ static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned int off struct adp5588_kpad *kpad = gpiochip_get_data(chip); unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); - int ret; - mutex_lock(&kpad->gpio_lock); + guard(mutex)(&kpad->gpio_lock); kpad->dir[bank] &= ~bit; - ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]); - - mutex_unlock(&kpad->gpio_lock); - - return ret; + return adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]); } static int adp5588_gpio_direction_output(struct gpio_chip *chip, @@ -310,9 +297,9 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, struct adp5588_kpad *kpad = gpiochip_get_data(chip); unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); - int ret; + int error; - mutex_lock(&kpad->gpio_lock); + guard(mutex)(&kpad->gpio_lock); kpad->dir[bank] |= bit; @@ -321,17 +308,16 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, else kpad->dat_out[bank] &= ~bit; - ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, - kpad->dat_out[bank]); - if (ret) - goto out_unlock; - - ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]); + error = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, + kpad->dat_out[bank]); + if (error) + return error; -out_unlock: - mutex_unlock(&kpad->gpio_lock); + error = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]); + if (error) + return error; - return ret; + return 0; } static int adp5588_build_gpiomap(struct adp5588_kpad *kpad) @@ -446,10 +432,17 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad) kpad->gc.label = kpad->client->name; kpad->gc.owner = THIS_MODULE; - girq = &kpad->gc.irq; - gpio_irq_chip_set_chip(girq, &adp5588_irq_chip); - girq->handler = handle_bad_irq; - girq->threaded = true; + if (device_property_present(dev, "interrupt-controller")) { + if (!kpad->client->irq) { + dev_err(dev, "Unable to serve as interrupt controller without interrupt"); + return -EINVAL; + } + + girq = &kpad->gc.irq; + gpio_irq_chip_set_chip(girq, &adp5588_irq_chip); + girq->handler = handle_bad_irq; + girq->threaded = true; + } mutex_init(&kpad->gpio_lock); @@ -627,7 +620,7 @@ static int adp5588_setup(struct adp5588_kpad *kpad) for (i = 0; i < KEYP_MAX_EVENT; i++) { ret = adp5588_read(client, KEY_EVENTA); - if (ret) + if (ret < 0) return ret; } @@ -647,6 +640,18 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad) struct i2c_client *client = kpad->client; int ret, i; + /* + * Check if the device is to be operated purely in GPIO mode. To do + * so, check that no keypad rows or columns have been specified, + * since all GPINS should be configured as GPIO. + */ + if (!device_property_present(&client->dev, "keypad,num-rows") && + !device_property_present(&client->dev, "keypad,num-columns")) { + /* If purely GPIO, skip keypad setup */ + kpad->gpio_only = true; + return 0; + } + ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows, &kpad->cols); if (ret) @@ -790,17 +795,19 @@ static int adp5588_probe(struct i2c_client *client) if (error) return error; - error = devm_request_threaded_irq(&client->dev, client->irq, - adp5588_hard_irq, adp5588_thread_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - client->dev.driver->name, kpad); - if (error) { - dev_err(&client->dev, "failed to request irq %d: %d\n", - client->irq, error); - return error; + if (client->irq) { + error = devm_request_threaded_irq(&client->dev, client->irq, + adp5588_hard_irq, adp5588_thread_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->dev.driver->name, kpad); + if (error) { + dev_err(&client->dev, "failed to request irq %d: %d\n", + client->irq, error); + return error; + } } - dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq); + dev_info(&client->dev, "Rev.%d controller\n", revid); return 0; } diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index f4f2078cf501..5855d4fc6e6a 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -639,7 +639,7 @@ static void atkbd_event_work(struct work_struct *work) { struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); - mutex_lock(&atkbd->mutex); + guard(mutex)(&atkbd->mutex); if (!atkbd->enabled) { /* @@ -657,8 +657,6 @@ static void atkbd_event_work(struct work_struct *work) if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) atkbd_set_repeat_rate(atkbd); } - - mutex_unlock(&atkbd->mutex); } /* @@ -1361,7 +1359,7 @@ static int atkbd_reconnect(struct serio *serio) { struct atkbd *atkbd = atkbd_from_serio(serio); struct serio_driver *drv = serio->drv; - int retval = -1; + int error; if (!atkbd || !drv) { dev_dbg(&serio->dev, @@ -1369,16 +1367,17 @@ static int atkbd_reconnect(struct serio *serio) return -1; } - mutex_lock(&atkbd->mutex); + guard(mutex)(&atkbd->mutex); atkbd_disable(atkbd); if (atkbd->write) { - if (atkbd_probe(atkbd)) - goto out; + error = atkbd_probe(atkbd); + if (error) + return error; if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) - goto out; + return -EIO; /* * Restore LED state and repeat rate. While input core @@ -1404,11 +1403,7 @@ static int atkbd_reconnect(struct serio *serio) if (atkbd->write) atkbd_activate(atkbd); - retval = 0; - - out: - mutex_unlock(&atkbd->mutex); - return retval; + return 0; } static const struct serio_device_id atkbd_serio_ids[] = { @@ -1465,17 +1460,15 @@ static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t struct atkbd *atkbd = atkbd_from_serio(serio); int retval; - retval = mutex_lock_interruptible(&atkbd->mutex); - if (retval) - return retval; + scoped_guard(mutex_intr, &atkbd->mutex) { + atkbd_disable(atkbd); + retval = handler(atkbd, buf, count); + atkbd_enable(atkbd); - atkbd_disable(atkbd); - retval = handler(atkbd, buf, count); - atkbd_enable(atkbd); - - mutex_unlock(&atkbd->mutex); + return retval; + } - return retval; + return -EINTR; } static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 9f3bcd41cf67..380fe8dab3b0 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -245,23 +245,20 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, { int n_events = get_n_events_by_type(type); const unsigned long *bitmap = get_bm_events_by_type(ddata->input, type); - unsigned long *bits; ssize_t error; int i; - bits = bitmap_alloc(n_events, GFP_KERNEL); + unsigned long *bits __free(bitmap) = bitmap_alloc(n_events, GFP_KERNEL); if (!bits) return -ENOMEM; error = bitmap_parselist(buf, bits, n_events); if (error) - goto out; + return error; /* First validate */ - if (!bitmap_subset(bits, bitmap, n_events)) { - error = -EINVAL; - goto out; - } + if (!bitmap_subset(bits, bitmap, n_events)) + return -EINVAL; for (i = 0; i < ddata->pdata->nbuttons; i++) { struct gpio_button_data *bdata = &ddata->data[i]; @@ -271,12 +268,11 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, if (test_bit(*bdata->code, bits) && !bdata->button->can_disable) { - error = -EINVAL; - goto out; + return -EINVAL; } } - mutex_lock(&ddata->disable_lock); + guard(mutex)(&ddata->disable_lock); for (i = 0; i < ddata->pdata->nbuttons; i++) { struct gpio_button_data *bdata = &ddata->data[i]; @@ -290,11 +286,7 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, gpio_keys_enable_button(bdata); } - mutex_unlock(&ddata->disable_lock); - -out: - bitmap_free(bits); - return error; + return 0; } #define ATTR_SHOW_FN(name, type, only_disabled) \ @@ -470,11 +462,10 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; struct input_dev *input = bdata->input; - unsigned long flags; BUG_ON(irq != bdata->irq); - spin_lock_irqsave(&bdata->lock, flags); + guard(spinlock_irqsave)(&bdata->lock); if (!bdata->key_pressed) { if (bdata->button->wakeup) @@ -497,7 +488,6 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) ms_to_ktime(bdata->release_delay), HRTIMER_MODE_REL_HARD); out: - spin_unlock_irqrestore(&bdata->lock, flags); return IRQ_HANDLED; } @@ -768,7 +758,6 @@ gpio_keys_get_devtree_pdata(struct device *dev) { struct gpio_keys_platform_data *pdata; struct gpio_keys_button *button; - struct fwnode_handle *child; int nbuttons, irq; nbuttons = device_get_child_node_count(dev); @@ -790,7 +779,7 @@ gpio_keys_get_devtree_pdata(struct device *dev) device_property_read_string(dev, "label", &pdata->name); - device_for_each_child_node(dev, child) { + device_for_each_child_node_scoped(dev, child) { if (is_of_node(child)) { irq = of_irq_get_byname(to_of_node(child), "irq"); if (irq > 0) @@ -808,7 +797,6 @@ gpio_keys_get_devtree_pdata(struct device *dev) if (fwnode_property_read_u32(child, "linux,code", &button->code)) { dev_err(dev, "Button without keycode\n"); - fwnode_handle_put(child); return ERR_PTR(-EINVAL); } @@ -1064,10 +1052,10 @@ static int gpio_keys_suspend(struct device *dev) if (error) return error; } else { - mutex_lock(&input->mutex); + guard(mutex)(&input->mutex); + if (input_device_enabled(input)) gpio_keys_close(input); - mutex_unlock(&input->mutex); } return 0; @@ -1077,20 +1065,20 @@ static int gpio_keys_resume(struct device *dev) { struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); struct input_dev *input = ddata->input; - int error = 0; + int error; if (device_may_wakeup(dev)) { gpio_keys_disable_wakeup(ddata); } else { - mutex_lock(&input->mutex); - if (input_device_enabled(input)) + guard(mutex)(&input->mutex); + + if (input_device_enabled(input)) { error = gpio_keys_open(input); - mutex_unlock(&input->mutex); + if (error) + return error; + } } - if (error) - return error; - gpio_keys_report_state(ddata); return 0; } diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c index b41fd1240f43..41ca0d3c9098 100644 --- a/drivers/input/keyboard/gpio_keys_polled.c +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -144,7 +144,6 @@ gpio_keys_polled_get_devtree_pdata(struct device *dev) { struct gpio_keys_platform_data *pdata; struct gpio_keys_button *button; - struct fwnode_handle *child; int nbuttons; nbuttons = device_get_child_node_count(dev); @@ -166,11 +165,10 @@ gpio_keys_polled_get_devtree_pdata(struct device *dev) device_property_read_string(dev, "label", &pdata->name); - device_for_each_child_node(dev, child) { + device_for_each_child_node_scoped(dev, child) { if (fwnode_property_read_u32(child, "linux,code", &button->code)) { dev_err(dev, "button without keycode\n"); - fwnode_handle_put(child); return ERR_PTR(-EINVAL); } diff --git a/drivers/input/keyboard/iqs62x-keys.c b/drivers/input/keyboard/iqs62x-keys.c index 688d61244b5f..1315b0f0862f 100644 --- a/drivers/input/keyboard/iqs62x-keys.c +++ b/drivers/input/keyboard/iqs62x-keys.c @@ -45,7 +45,6 @@ struct iqs62x_keys_private { static int iqs62x_keys_parse_prop(struct platform_device *pdev, struct iqs62x_keys_private *iqs62x_keys) { - struct fwnode_handle *child; unsigned int val; int ret, i; @@ -68,7 +67,8 @@ static int iqs62x_keys_parse_prop(struct platform_device *pdev, } for (i = 0; i < ARRAY_SIZE(iqs62x_keys->switches); i++) { - child = device_get_named_child_node(&pdev->dev, + struct fwnode_handle *child __free(fwnode_handle) = + device_get_named_child_node(&pdev->dev, iqs62x_switch_names[i]); if (!child) continue; @@ -77,7 +77,6 @@ static int iqs62x_keys_parse_prop(struct platform_device *pdev, if (ret) { dev_err(&pdev->dev, "Failed to read switch code: %d\n", ret); - fwnode_handle_put(child); return ret; } iqs62x_keys->switches[i].code = val; @@ -91,8 +90,6 @@ static int iqs62x_keys_parse_prop(struct platform_device *pdev, iqs62x_keys->switches[i].flag = (i == IQS62X_SW_HALL_N ? IQS62X_EVENT_HALL_N_T : IQS62X_EVENT_HALL_S_T); - - fwnode_handle_put(child); } return 0; diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 7a56f3d3aacd..3c38bae576ed 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -17,19 +17,27 @@ #include <linux/jiffies.h> #include <linux/module.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/input/matrix_keypad.h> #include <linux/slab.h> #include <linux/of.h> -#include <linux/of_gpio.h> -#include <linux/of_platform.h> struct matrix_keypad { - const struct matrix_keypad_platform_data *pdata; struct input_dev *input_dev; unsigned int row_shift; + unsigned int col_scan_delay_us; + /* key debounce interval in milli-second */ + unsigned int debounce_ms; + bool drive_inactive_cols; + + struct gpio_desc *row_gpios[MATRIX_MAX_ROWS]; + unsigned int num_row_gpios; + + struct gpio_desc *col_gpios[MATRIX_MAX_ROWS]; + unsigned int num_col_gpios; + unsigned int row_irqs[MATRIX_MAX_ROWS]; - unsigned int num_row_irqs; DECLARE_BITMAP(wakeup_enabled_irqs, MATRIX_MAX_ROWS); uint32_t last_key_state[MATRIX_MAX_COLS]; @@ -45,50 +53,43 @@ struct matrix_keypad { * columns. In that case it is configured here to be input, otherwise it is * driven with the inactive value. */ -static void __activate_col(const struct matrix_keypad_platform_data *pdata, - int col, bool on) +static void __activate_col(struct matrix_keypad *keypad, int col, bool on) { - bool level_on = !pdata->active_low; - if (on) { - gpio_direction_output(pdata->col_gpios[col], level_on); + gpiod_direction_output(keypad->col_gpios[col], 1); } else { - gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); - if (!pdata->drive_inactive_cols) - gpio_direction_input(pdata->col_gpios[col]); + gpiod_set_value_cansleep(keypad->col_gpios[col], 0); + if (!keypad->drive_inactive_cols) + gpiod_direction_input(keypad->col_gpios[col]); } } -static void activate_col(const struct matrix_keypad_platform_data *pdata, - int col, bool on) +static void activate_col(struct matrix_keypad *keypad, int col, bool on) { - __activate_col(pdata, col, on); + __activate_col(keypad, col, on); - if (on && pdata->col_scan_delay_us) - udelay(pdata->col_scan_delay_us); + if (on && keypad->col_scan_delay_us) + udelay(keypad->col_scan_delay_us); } -static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, - bool on) +static void activate_all_cols(struct matrix_keypad *keypad, bool on) { int col; - for (col = 0; col < pdata->num_col_gpios; col++) - __activate_col(pdata, col, on); + for (col = 0; col < keypad->num_col_gpios; col++) + __activate_col(keypad, col, on); } -static bool row_asserted(const struct matrix_keypad_platform_data *pdata, - int row) +static bool row_asserted(struct matrix_keypad *keypad, int row) { - return gpio_get_value_cansleep(pdata->row_gpios[row]) ? - !pdata->active_low : pdata->active_low; + return gpiod_get_value_cansleep(keypad->row_gpios[row]); } static void enable_row_irqs(struct matrix_keypad *keypad) { int i; - for (i = 0; i < keypad->num_row_irqs; i++) + for (i = 0; i < keypad->num_row_gpios; i++) enable_irq(keypad->row_irqs[i]); } @@ -96,7 +97,7 @@ static void disable_row_irqs(struct matrix_keypad *keypad) { int i; - for (i = 0; i < keypad->num_row_irqs; i++) + for (i = 0; i < keypad->num_row_gpios; i++) disable_irq_nosync(keypad->row_irqs[i]); } @@ -109,39 +110,38 @@ static void matrix_keypad_scan(struct work_struct *work) container_of(work, struct matrix_keypad, work.work); struct input_dev *input_dev = keypad->input_dev; const unsigned short *keycodes = input_dev->keycode; - const struct matrix_keypad_platform_data *pdata = keypad->pdata; uint32_t new_state[MATRIX_MAX_COLS]; int row, col, code; /* de-activate all columns for scanning */ - activate_all_cols(pdata, false); + activate_all_cols(keypad, false); memset(new_state, 0, sizeof(new_state)); - for (row = 0; row < pdata->num_row_gpios; row++) - gpio_direction_input(pdata->row_gpios[row]); + for (row = 0; row < keypad->num_row_gpios; row++) + gpiod_direction_input(keypad->row_gpios[row]); /* assert each column and read the row status out */ - for (col = 0; col < pdata->num_col_gpios; col++) { + for (col = 0; col < keypad->num_col_gpios; col++) { - activate_col(pdata, col, true); + activate_col(keypad, col, true); - for (row = 0; row < pdata->num_row_gpios; row++) + for (row = 0; row < keypad->num_row_gpios; row++) new_state[col] |= - row_asserted(pdata, row) ? (1 << row) : 0; + row_asserted(keypad, row) ? BIT(row) : 0; - activate_col(pdata, col, false); + activate_col(keypad, col, false); } - for (col = 0; col < pdata->num_col_gpios; col++) { + for (col = 0; col < keypad->num_col_gpios; col++) { uint32_t bits_changed; bits_changed = keypad->last_key_state[col] ^ new_state[col]; if (bits_changed == 0) continue; - for (row = 0; row < pdata->num_row_gpios; row++) { - if ((bits_changed & (1 << row)) == 0) + for (row = 0; row < keypad->num_row_gpios; row++) { + if (!(bits_changed & BIT(row))) continue; code = MATRIX_SCAN_CODE(row, col, keypad->row_shift); @@ -155,7 +155,7 @@ static void matrix_keypad_scan(struct work_struct *work) memcpy(keypad->last_key_state, new_state, sizeof(new_state)); - activate_all_cols(pdata, true); + activate_all_cols(keypad, true); /* Enable IRQs again */ spin_lock_irq(&keypad->lock); @@ -182,7 +182,7 @@ static irqreturn_t matrix_keypad_interrupt(int irq, void *id) disable_row_irqs(keypad); keypad->scan_pending = true; schedule_delayed_work(&keypad->work, - msecs_to_jiffies(keypad->pdata->debounce_ms)); + msecs_to_jiffies(keypad->debounce_ms)); out: spin_unlock_irqrestore(&keypad->lock, flags); @@ -225,7 +225,8 @@ static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad) { int i; - for_each_clear_bit(i, keypad->wakeup_enabled_irqs, keypad->num_row_irqs) + for_each_clear_bit(i, keypad->wakeup_enabled_irqs, + keypad->num_row_gpios) if (enable_irq_wake(keypad->row_irqs[i]) == 0) __set_bit(i, keypad->wakeup_enabled_irqs); } @@ -234,7 +235,8 @@ static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad) { int i; - for_each_set_bit(i, keypad->wakeup_enabled_irqs, keypad->num_row_irqs) { + for_each_set_bit(i, keypad->wakeup_enabled_irqs, + keypad->num_row_gpios) { disable_irq_wake(keypad->row_irqs[i]); __clear_bit(i, keypad->wakeup_enabled_irqs); } @@ -272,182 +274,108 @@ static DEFINE_SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops, static int matrix_keypad_init_gpio(struct platform_device *pdev, struct matrix_keypad *keypad) { - const struct matrix_keypad_platform_data *pdata = keypad->pdata; - int i, irq, err; - - /* initialized strobe lines as outputs, activated */ - for (i = 0; i < pdata->num_col_gpios; i++) { - err = devm_gpio_request(&pdev->dev, - pdata->col_gpios[i], "matrix_kbd_col"); - if (err) { - dev_err(&pdev->dev, - "failed to request GPIO%d for COL%d\n", - pdata->col_gpios[i], i); - return err; - } + bool active_low; + int nrow, ncol; + int err; + int i; - gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); + nrow = gpiod_count(&pdev->dev, "row"); + ncol = gpiod_count(&pdev->dev, "col"); + if (nrow < 0 || ncol < 0) { + dev_err(&pdev->dev, "missing row or column GPIOs\n"); + return -EINVAL; } - for (i = 0; i < pdata->num_row_gpios; i++) { - err = devm_gpio_request(&pdev->dev, - pdata->row_gpios[i], "matrix_kbd_row"); + keypad->num_row_gpios = nrow; + keypad->num_col_gpios = ncol; + + active_low = device_property_read_bool(&pdev->dev, "gpio-activelow"); + + /* initialize strobe lines as outputs, activated */ + for (i = 0; i < keypad->num_col_gpios; i++) { + keypad->col_gpios[i] = devm_gpiod_get_index(&pdev->dev, "col", + i, GPIOD_ASIS); + err = PTR_ERR_OR_ZERO(keypad->col_gpios[i]); if (err) { dev_err(&pdev->dev, - "failed to request GPIO%d for ROW%d\n", - pdata->row_gpios[i], i); + "failed to request GPIO for COL%d: %d\n", + i, err); return err; } - gpio_direction_input(pdata->row_gpios[i]); + gpiod_set_consumer_name(keypad->col_gpios[i], "matrix_kbd_col"); + + if (active_low ^ gpiod_is_active_low(keypad->col_gpios[i])) + gpiod_toggle_active_low(keypad->col_gpios[i]); + + gpiod_direction_output(keypad->col_gpios[i], 1); } - if (pdata->clustered_irq > 0) { - err = devm_request_any_context_irq(&pdev->dev, - pdata->clustered_irq, - matrix_keypad_interrupt, - pdata->clustered_irq_flags, - "matrix-keypad", keypad); - if (err < 0) { + for (i = 0; i < keypad->num_row_gpios; i++) { + keypad->row_gpios[i] = devm_gpiod_get_index(&pdev->dev, "row", + i, GPIOD_IN); + err = PTR_ERR_OR_ZERO(keypad->row_gpios[i]); + if (err) { dev_err(&pdev->dev, - "Unable to acquire clustered interrupt\n"); + "failed to request GPIO for ROW%d: %d\n", + i, err); return err; } - keypad->row_irqs[0] = pdata->clustered_irq; - keypad->num_row_irqs = 1; - } else { - for (i = 0; i < pdata->num_row_gpios; i++) { - irq = gpio_to_irq(pdata->row_gpios[i]); - if (irq < 0) { - err = irq; - dev_err(&pdev->dev, - "Unable to convert GPIO line %i to irq: %d\n", - pdata->row_gpios[i], err); - return err; - } - - err = devm_request_any_context_irq(&pdev->dev, - irq, - matrix_keypad_interrupt, - IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING, - "matrix-keypad", keypad); - if (err < 0) { - dev_err(&pdev->dev, - "Unable to acquire interrupt for GPIO line %i\n", - pdata->row_gpios[i]); - return err; - } - - keypad->row_irqs[i] = irq; - } + gpiod_set_consumer_name(keypad->row_gpios[i], "matrix_kbd_row"); - keypad->num_row_irqs = pdata->num_row_gpios; + if (active_low ^ gpiod_is_active_low(keypad->row_gpios[i])) + gpiod_toggle_active_low(keypad->row_gpios[i]); } - /* initialized as disabled - enabled by input->open */ - disable_row_irqs(keypad); - return 0; } -#ifdef CONFIG_OF -static struct matrix_keypad_platform_data * -matrix_keypad_parse_dt(struct device *dev) +static int matrix_keypad_setup_interrupts(struct platform_device *pdev, + struct matrix_keypad *keypad) { - struct matrix_keypad_platform_data *pdata; - struct device_node *np = dev->of_node; - unsigned int *gpios; - int ret, i, nrow, ncol; - - if (!np) { - dev_err(dev, "device lacks DT data\n"); - return ERR_PTR(-ENODEV); - } - - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - dev_err(dev, "could not allocate memory for platform data\n"); - return ERR_PTR(-ENOMEM); - } - - pdata->num_row_gpios = nrow = gpiod_count(dev, "row"); - pdata->num_col_gpios = ncol = gpiod_count(dev, "col"); - if (nrow < 0 || ncol < 0) { - dev_err(dev, "number of keypad rows/columns not specified\n"); - return ERR_PTR(-EINVAL); - } - - pdata->no_autorepeat = of_property_read_bool(np, "linux,no-autorepeat"); - - pdata->wakeup = of_property_read_bool(np, "wakeup-source") || - of_property_read_bool(np, "linux,wakeup"); /* legacy */ - - pdata->active_low = of_property_read_bool(np, "gpio-activelow"); - - pdata->drive_inactive_cols = - of_property_read_bool(np, "drive-inactive-cols"); - - of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms); - of_property_read_u32(np, "col-scan-delay-us", - &pdata->col_scan_delay_us); + int err; + int irq; + int i; - gpios = devm_kcalloc(dev, - pdata->num_row_gpios + pdata->num_col_gpios, - sizeof(unsigned int), - GFP_KERNEL); - if (!gpios) { - dev_err(dev, "could not allocate memory for gpios\n"); - return ERR_PTR(-ENOMEM); - } + for (i = 0; i < keypad->num_row_gpios; i++) { + irq = gpiod_to_irq(keypad->row_gpios[i]); + if (irq < 0) { + err = irq; + dev_err(&pdev->dev, + "Unable to convert GPIO line %i to irq: %d\n", + i, err); + return err; + } - for (i = 0; i < nrow; i++) { - ret = of_get_named_gpio(np, "row-gpios", i); - if (ret < 0) - return ERR_PTR(ret); - gpios[i] = ret; - } + err = devm_request_any_context_irq(&pdev->dev, irq, + matrix_keypad_interrupt, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err < 0) { + dev_err(&pdev->dev, + "Unable to acquire interrupt for row %i: %d\n", + i, err); + return err; + } - for (i = 0; i < ncol; i++) { - ret = of_get_named_gpio(np, "col-gpios", i); - if (ret < 0) - return ERR_PTR(ret); - gpios[nrow + i] = ret; + keypad->row_irqs[i] = irq; } - pdata->row_gpios = gpios; - pdata->col_gpios = &gpios[pdata->num_row_gpios]; - - return pdata; -} -#else -static inline struct matrix_keypad_platform_data * -matrix_keypad_parse_dt(struct device *dev) -{ - dev_err(dev, "no platform data defined\n"); + /* initialized as disabled - enabled by input->open */ + disable_row_irqs(keypad); - return ERR_PTR(-EINVAL); + return 0; } -#endif static int matrix_keypad_probe(struct platform_device *pdev) { - const struct matrix_keypad_platform_data *pdata; struct matrix_keypad *keypad; struct input_dev *input_dev; + bool wakeup; int err; - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - pdata = matrix_keypad_parse_dt(&pdev->dev); - if (IS_ERR(pdata)) - return PTR_ERR(pdata); - } else if (!pdata->keymap_data) { - dev_err(&pdev->dev, "no keymap data defined\n"); - return -EINVAL; - } - keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL); if (!keypad) return -ENOMEM; @@ -457,40 +385,56 @@ static int matrix_keypad_probe(struct platform_device *pdev) return -ENOMEM; keypad->input_dev = input_dev; - keypad->pdata = pdata; - keypad->row_shift = get_count_order(pdata->num_col_gpios); keypad->stopped = true; INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); spin_lock_init(&keypad->lock); + keypad->drive_inactive_cols = + device_property_read_bool(&pdev->dev, "drive-inactive-cols"); + device_property_read_u32(&pdev->dev, "debounce-delay-ms", + &keypad->debounce_ms); + device_property_read_u32(&pdev->dev, "col-scan-delay-us", + &keypad->col_scan_delay_us); + + err = matrix_keypad_init_gpio(pdev, keypad); + if (err) + return err; + + keypad->row_shift = get_count_order(keypad->num_col_gpios); + + err = matrix_keypad_setup_interrupts(pdev, keypad); + if (err) + return err; + input_dev->name = pdev->name; input_dev->id.bustype = BUS_HOST; input_dev->open = matrix_keypad_start; input_dev->close = matrix_keypad_stop; - err = matrix_keypad_build_keymap(pdata->keymap_data, NULL, - pdata->num_row_gpios, - pdata->num_col_gpios, + err = matrix_keypad_build_keymap(NULL, NULL, + keypad->num_row_gpios, + keypad->num_col_gpios, NULL, input_dev); if (err) { dev_err(&pdev->dev, "failed to build keymap\n"); return -ENOMEM; } - if (!pdata->no_autorepeat) + if (!device_property_read_bool(&pdev->dev, "linux,no-autorepeat")) __set_bit(EV_REP, input_dev->evbit); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); input_set_drvdata(input_dev, keypad); - err = matrix_keypad_init_gpio(pdev, keypad); - if (err) - return err; - err = input_register_device(keypad->input_dev); if (err) return err; - device_init_wakeup(&pdev->dev, pdata->wakeup); + wakeup = device_property_read_bool(&pdev->dev, "wakeup-source") || + /* legacy */ + device_property_read_bool(&pdev->dev, "linux,wakeup"); + device_init_wakeup(&pdev->dev, wakeup); + platform_set_drvdata(pdev, keypad); return 0; diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c deleted file mode 100644 index 2410f676c7f9..000000000000 --- a/drivers/input/keyboard/mcs_touchkey.c +++ /dev/null @@ -1,268 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Touchkey driver for MELFAS MCS5000/5080 controller - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: HeungJun Kim <riverful.kim@samsung.com> - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - */ - -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/irq.h> -#include <linux/slab.h> -#include <linux/platform_data/mcs.h> -#include <linux/pm.h> - -/* MCS5000 Touchkey */ -#define MCS5000_TOUCHKEY_STATUS 0x04 -#define MCS5000_TOUCHKEY_STATUS_PRESS 7 -#define MCS5000_TOUCHKEY_FW 0x0a -#define MCS5000_TOUCHKEY_BASE_VAL 0x61 - -/* MCS5080 Touchkey */ -#define MCS5080_TOUCHKEY_STATUS 0x00 -#define MCS5080_TOUCHKEY_STATUS_PRESS 3 -#define MCS5080_TOUCHKEY_FW 0x01 -#define MCS5080_TOUCHKEY_BASE_VAL 0x1 - -enum mcs_touchkey_type { - MCS5000_TOUCHKEY, - MCS5080_TOUCHKEY, -}; - -struct mcs_touchkey_chip { - unsigned int status_reg; - unsigned int pressbit; - unsigned int press_invert; - unsigned int baseval; -}; - -struct mcs_touchkey_data { - void (*poweron)(bool); - - struct i2c_client *client; - struct input_dev *input_dev; - struct mcs_touchkey_chip chip; - unsigned int key_code; - unsigned int key_val; - unsigned short keycodes[]; -}; - -static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) -{ - struct mcs_touchkey_data *data = dev_id; - struct mcs_touchkey_chip *chip = &data->chip; - struct i2c_client *client = data->client; - struct input_dev *input = data->input_dev; - unsigned int key_val; - unsigned int pressed; - int val; - - val = i2c_smbus_read_byte_data(client, chip->status_reg); - if (val < 0) { - dev_err(&client->dev, "i2c read error [%d]\n", val); - goto out; - } - - pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; - if (chip->press_invert) - pressed ^= chip->press_invert; - - /* key_val is 0 when released, so we should use key_val of press. */ - if (pressed) { - key_val = val & (0xff >> (8 - chip->pressbit)); - if (!key_val) - goto out; - key_val -= chip->baseval; - data->key_code = data->keycodes[key_val]; - data->key_val = key_val; - } - - input_event(input, EV_MSC, MSC_SCAN, data->key_val); - input_report_key(input, data->key_code, pressed); - input_sync(input); - - dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, - pressed ? "pressed" : "released"); - - out: - return IRQ_HANDLED; -} - -static void mcs_touchkey_poweroff(void *data) -{ - struct mcs_touchkey_data *touchkey = data; - - touchkey->poweron(false); -} - -static int mcs_touchkey_probe(struct i2c_client *client) -{ - const struct i2c_device_id *id = i2c_client_get_device_id(client); - const struct mcs_platform_data *pdata; - struct mcs_touchkey_data *data; - struct input_dev *input_dev; - unsigned int fw_reg; - int fw_ver; - int error; - int i; - - pdata = dev_get_platdata(&client->dev); - if (!pdata) { - dev_err(&client->dev, "no platform data defined\n"); - return -EINVAL; - } - - data = devm_kzalloc(&client->dev, - struct_size(data, keycodes, pdata->key_maxval + 1), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - input_dev = devm_input_allocate_device(&client->dev); - if (!input_dev) { - dev_err(&client->dev, "Failed to allocate input device\n"); - return -ENOMEM; - } - - data->client = client; - data->input_dev = input_dev; - - if (id->driver_data == MCS5000_TOUCHKEY) { - data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; - data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; - data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; - fw_reg = MCS5000_TOUCHKEY_FW; - } else { - data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; - data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; - data->chip.press_invert = 1; - data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; - fw_reg = MCS5080_TOUCHKEY_FW; - } - - fw_ver = i2c_smbus_read_byte_data(client, fw_reg); - if (fw_ver < 0) { - dev_err(&client->dev, "i2c read error[%d]\n", fw_ver); - return fw_ver; - } - dev_info(&client->dev, "Firmware version: %d\n", fw_ver); - - input_dev->name = "MELFAS MCS Touchkey"; - input_dev->id.bustype = BUS_I2C; - input_dev->evbit[0] = BIT_MASK(EV_KEY); - if (!pdata->no_autorepeat) - input_dev->evbit[0] |= BIT_MASK(EV_REP); - input_dev->keycode = data->keycodes; - input_dev->keycodesize = sizeof(data->keycodes[0]); - input_dev->keycodemax = pdata->key_maxval + 1; - - for (i = 0; i < pdata->keymap_size; i++) { - unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); - unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); - - data->keycodes[val] = code; - __set_bit(code, input_dev->keybit); - } - - input_set_capability(input_dev, EV_MSC, MSC_SCAN); - input_set_drvdata(input_dev, data); - - if (pdata->cfg_pin) - pdata->cfg_pin(); - - if (pdata->poweron) { - data->poweron = pdata->poweron; - data->poweron(true); - - error = devm_add_action_or_reset(&client->dev, - mcs_touchkey_poweroff, data); - if (error) - return error; - } - - error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, mcs_touchkey_interrupt, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - client->dev.driver->name, data); - if (error) { - dev_err(&client->dev, "Failed to register interrupt\n"); - return error; - } - - error = input_register_device(input_dev); - if (error) - return error; - - i2c_set_clientdata(client, data); - return 0; -} - -static void mcs_touchkey_shutdown(struct i2c_client *client) -{ - struct mcs_touchkey_data *data = i2c_get_clientdata(client); - - if (data->poweron) - data->poweron(false); -} - -static int mcs_touchkey_suspend(struct device *dev) -{ - struct mcs_touchkey_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - - /* Disable the work */ - disable_irq(client->irq); - - /* Finally turn off the power */ - if (data->poweron) - data->poweron(false); - - return 0; -} - -static int mcs_touchkey_resume(struct device *dev) -{ - struct mcs_touchkey_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - - /* Enable the device first */ - if (data->poweron) - data->poweron(true); - - /* Enable irq again */ - enable_irq(client->irq); - - return 0; -} - -static DEFINE_SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, - mcs_touchkey_suspend, mcs_touchkey_resume); - -static const struct i2c_device_id mcs_touchkey_id[] = { - { "mcs5000_touchkey", MCS5000_TOUCHKEY }, - { "mcs5080_touchkey", MCS5080_TOUCHKEY }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); - -static struct i2c_driver mcs_touchkey_driver = { - .driver = { - .name = "mcs_touchkey", - .pm = pm_sleep_ptr(&mcs_touchkey_pm_ops), - }, - .probe = mcs_touchkey_probe, - .shutdown = mcs_touchkey_shutdown, - .id_table = mcs_touchkey_id, -}; - -module_i2c_driver(mcs_touchkey_driver); - -/* Module information */ -MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); -MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); -MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); -MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/mt6779-keypad.c b/drivers/input/keyboard/mt6779-keypad.c index 19f69d167fbd..e5eb025c5e99 100644 --- a/drivers/input/keyboard/mt6779-keypad.c +++ b/drivers/input/keyboard/mt6779-keypad.c @@ -92,11 +92,6 @@ static irqreturn_t mt6779_keypad_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static void mt6779_keypad_clk_disable(void *data) -{ - clk_disable_unprepare(data); -} - static void mt6779_keypad_calc_row_col_single(unsigned int key, unsigned int *row, unsigned int *col) @@ -213,21 +208,10 @@ static int mt6779_keypad_pdrv_probe(struct platform_device *pdev) regmap_update_bits(keypad->regmap, MTK_KPD_SEL, MTK_KPD_SEL_COL, MTK_KPD_SEL_COLMASK(keypad->n_cols)); - keypad->clk = devm_clk_get(&pdev->dev, "kpd"); + keypad->clk = devm_clk_get_enabled(&pdev->dev, "kpd"); if (IS_ERR(keypad->clk)) return PTR_ERR(keypad->clk); - error = clk_prepare_enable(keypad->clk); - if (error) { - dev_err(&pdev->dev, "cannot prepare/enable keypad clock\n"); - return error; - } - - error = devm_add_action_or_reset(&pdev->dev, mt6779_keypad_clk_disable, - keypad->clk); - if (error) - return error; - irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -260,6 +244,7 @@ static const struct of_device_id mt6779_keypad_of_match[] = { { .compatible = "mediatek,mt6873-keypad" }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, mt6779_keypad_of_match); static struct platform_driver mt6779_keypad_pdrv = { .probe = mt6779_keypad_pdrv_probe, diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c deleted file mode 100644 index b3ccc97f61e1..000000000000 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ /dev/null @@ -1,378 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson - * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson - * - * Keypad controller driver for the SKE (Scroll Key Encoder) module used in - * the Nomadik 8815 and Ux500 platforms. - */ - -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/slab.h> -#include <linux/clk.h> -#include <linux/module.h> - -#include <linux/platform_data/keypad-nomadik-ske.h> - -/* SKE_CR bits */ -#define SKE_KPMLT (0x1 << 6) -#define SKE_KPCN (0x7 << 3) -#define SKE_KPASEN (0x1 << 2) -#define SKE_KPASON (0x1 << 7) - -/* SKE_IMSC bits */ -#define SKE_KPIMA (0x1 << 2) - -/* SKE_ICR bits */ -#define SKE_KPICS (0x1 << 3) -#define SKE_KPICA (0x1 << 2) - -/* SKE_RIS bits */ -#define SKE_KPRISA (0x1 << 2) - -#define SKE_KEYPAD_ROW_SHIFT 3 -#define SKE_KPD_NUM_ROWS 8 -#define SKE_KPD_NUM_COLS 8 - -/* keypad auto scan registers */ -#define SKE_ASR0 0x20 -#define SKE_ASR1 0x24 -#define SKE_ASR2 0x28 -#define SKE_ASR3 0x2C - -#define SKE_NUM_ASRX_REGISTERS (4) -#define KEY_PRESSED_DELAY 10 - -/** - * struct ske_keypad - data structure used by keypad driver - * @irq: irq no - * @reg_base: ske registers base address - * @input: pointer to input device object - * @board: keypad platform device - * @keymap: matrix scan code table for keycodes - * @clk: clock structure pointer - * @pclk: clock structure pointer - * @ske_keypad_lock: spinlock protecting the keypad read/writes - */ -struct ske_keypad { - int irq; - void __iomem *reg_base; - struct input_dev *input; - const struct ske_keypad_platform_data *board; - unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; - struct clk *clk; - struct clk *pclk; - spinlock_t ske_keypad_lock; -}; - -static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, - u8 mask, u8 data) -{ - u32 ret; - - spin_lock(&keypad->ske_keypad_lock); - - ret = readl(keypad->reg_base + addr); - ret &= ~mask; - ret |= data; - writel(ret, keypad->reg_base + addr); - - spin_unlock(&keypad->ske_keypad_lock); -} - -/* - * ske_keypad_chip_init: init keypad controller configuration - * - * Enable Multi key press detection, auto scan mode - */ -static int __init ske_keypad_chip_init(struct ske_keypad *keypad) -{ - u32 value; - int timeout = keypad->board->debounce_ms; - - /* check SKE_RIS to be 0 */ - while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) - cpu_relax(); - - if (timeout == -1) - return -EINVAL; - - /* - * set debounce value - * keypad dbounce is configured in DBCR[15:8] - * dbounce value in steps of 32/32.768 ms - */ - spin_lock(&keypad->ske_keypad_lock); - value = readl(keypad->reg_base + SKE_DBCR); - value = value & 0xff; - value |= ((keypad->board->debounce_ms * 32000)/32768) << 8; - writel(value, keypad->reg_base + SKE_DBCR); - spin_unlock(&keypad->ske_keypad_lock); - - /* enable multi key detection */ - ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT); - - /* - * set up the number of columns - * KPCN[5:3] defines no. of keypad columns to be auto scanned - */ - value = (keypad->board->kcol - 1) << 3; - ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value); - - /* clear keypad interrupt for auto(and pending SW) scans */ - ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS); - - /* un-mask keypad interrupts */ - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - /* enable automatic scan */ - ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN); - - return 0; -} - -static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col) -{ - int row = 0, code, pos; - struct input_dev *input = keypad->input; - u32 ske_ris; - int key_pressed; - int num_of_rows; - - /* find out the row */ - num_of_rows = hweight8(status); - do { - pos = __ffs(status); - row = pos; - status &= ~(1 << pos); - - code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); - ske_ris = readl(keypad->reg_base + SKE_RIS); - key_pressed = ske_ris & SKE_KPRISA; - - input_event(input, EV_MSC, MSC_SCAN, code); - input_report_key(input, keypad->keymap[code], key_pressed); - input_sync(input); - num_of_rows--; - } while (num_of_rows); -} - -static void ske_keypad_read_data(struct ske_keypad *keypad) -{ - u8 status; - int col = 0; - int ske_asr, i; - - /* - * Read the auto scan registers - * - * Each SKE_ASRx (x=0 to x=3) contains two row values. - * lower byte contains row value for column 2*x, - * upper byte contains row value for column 2*x + 1 - */ - for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) { - ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i)); - if (!ske_asr) - continue; - - /* now that ASRx is zero, find out the coloumn x and row y */ - status = ske_asr & 0xff; - if (status) { - col = i * 2; - ske_keypad_report(keypad, status, col); - } - status = (ske_asr & 0xff00) >> 8; - if (status) { - col = (i * 2) + 1; - ske_keypad_report(keypad, status, col); - } - } -} - -static irqreturn_t ske_keypad_irq(int irq, void *dev_id) -{ - struct ske_keypad *keypad = dev_id; - int timeout = keypad->board->debounce_ms; - - /* disable auto scan interrupt; mask the interrupt generated */ - ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); - ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); - - while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout) - cpu_relax(); - - /* SKEx registers are stable and can be read */ - ske_keypad_read_data(keypad); - - /* wait until raw interrupt is clear */ - while ((readl(keypad->reg_base + SKE_RIS)) && --timeout) - msleep(KEY_PRESSED_DELAY); - - /* enable auto scan interrupts */ - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - return IRQ_HANDLED; -} - -static void ske_keypad_board_exit(void *data) -{ - struct ske_keypad *keypad = data; - - keypad->board->exit(); -} - -static int __init ske_keypad_probe(struct platform_device *pdev) -{ - const struct ske_keypad_platform_data *plat = - dev_get_platdata(&pdev->dev); - struct device *dev = &pdev->dev; - struct ske_keypad *keypad; - struct input_dev *input; - int irq; - int error; - - if (!plat) { - dev_err(&pdev->dev, "invalid keypad platform data\n"); - return -EINVAL; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - keypad = devm_kzalloc(dev, sizeof(struct ske_keypad), - GFP_KERNEL); - input = devm_input_allocate_device(dev); - if (!keypad || !input) { - dev_err(&pdev->dev, "failed to allocate keypad memory\n"); - return -ENOMEM; - } - - keypad->irq = irq; - keypad->board = plat; - keypad->input = input; - spin_lock_init(&keypad->ske_keypad_lock); - - keypad->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(keypad->reg_base)) - return PTR_ERR(keypad->reg_base); - - keypad->pclk = devm_clk_get_enabled(dev, "apb_pclk"); - if (IS_ERR(keypad->pclk)) { - dev_err(&pdev->dev, "failed to get pclk\n"); - return PTR_ERR(keypad->pclk); - } - - keypad->clk = devm_clk_get_enabled(dev, NULL); - if (IS_ERR(keypad->clk)) { - dev_err(&pdev->dev, "failed to get clk\n"); - return PTR_ERR(keypad->clk); - } - - input->id.bustype = BUS_HOST; - input->name = "ux500-ske-keypad"; - input->dev.parent = &pdev->dev; - - error = matrix_keypad_build_keymap(plat->keymap_data, NULL, - SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, - keypad->keymap, input); - if (error) { - dev_err(&pdev->dev, "Failed to build keymap\n"); - return error; - } - - input_set_capability(input, EV_MSC, MSC_SCAN); - if (!plat->no_autorepeat) - __set_bit(EV_REP, input->evbit); - - /* go through board initialization helpers */ - if (keypad->board->init) - keypad->board->init(); - - if (keypad->board->exit) { - error = devm_add_action_or_reset(dev, ske_keypad_board_exit, - keypad); - if (error) - return error; - } - - error = ske_keypad_chip_init(keypad); - if (error) { - dev_err(&pdev->dev, "unable to init keypad hardware\n"); - return error; - } - - error = devm_request_threaded_irq(dev, keypad->irq, - NULL, ske_keypad_irq, - IRQF_ONESHOT, "ske-keypad", keypad); - if (error) { - dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); - return error; - } - - error = input_register_device(input); - if (error) { - dev_err(&pdev->dev, - "unable to register input device: %d\n", error); - return error; - } - - if (plat->wakeup_enable) - device_init_wakeup(&pdev->dev, true); - - platform_set_drvdata(pdev, keypad); - - return 0; -} - -static int ske_keypad_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct ske_keypad *keypad = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - if (device_may_wakeup(dev)) - enable_irq_wake(irq); - else - ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); - - return 0; -} - -static int ske_keypad_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct ske_keypad *keypad = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - if (device_may_wakeup(dev)) - disable_irq_wake(irq); - else - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - return 0; -} - -static DEFINE_SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, - ske_keypad_suspend, ske_keypad_resume); - -static struct platform_driver ske_keypad_driver = { - .driver = { - .name = "nmk-ske-keypad", - .pm = pm_sleep_ptr(&ske_keypad_dev_pm_ops), - }, -}; - -module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>"); -MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver"); -MODULE_ALIAS("platform:nomadik-ske-keypad"); diff --git a/drivers/input/keyboard/qt1050.c b/drivers/input/keyboard/qt1050.c index 5a2592e6293d..bce8157d1871 100644 --- a/drivers/input/keyboard/qt1050.c +++ b/drivers/input/keyboard/qt1050.c @@ -346,35 +346,34 @@ static int qt1050_apply_fw_data(struct qt1050_priv *ts) static int qt1050_parse_fw(struct qt1050_priv *ts) { struct device *dev = &ts->client->dev; - struct fwnode_handle *child; int nbuttons; nbuttons = device_get_child_node_count(dev); if (nbuttons == 0 || nbuttons > QT1050_MAX_KEYS) return -ENODEV; - device_for_each_child_node(dev, child) { + device_for_each_child_node_scoped(dev, child) { struct qt1050_key button; /* Required properties */ if (fwnode_property_read_u32(child, "linux,code", &button.keycode)) { dev_err(dev, "Button without keycode\n"); - goto err; + return -EINVAL; } if (button.keycode >= KEY_MAX) { dev_err(dev, "Invalid keycode 0x%x\n", button.keycode); - goto err; + return -EINVAL; } if (fwnode_property_read_u32(child, "reg", &button.num)) { dev_err(dev, "Button without pad number\n"); - goto err; + return -EINVAL; } if (button.num < 0 || button.num > QT1050_MAX_KEYS - 1) - goto err; + return -EINVAL; ts->reg_keys |= BIT(button.num); @@ -424,10 +423,6 @@ static int qt1050_parse_fw(struct qt1050_priv *ts) } return 0; - -err: - fwnode_handle_put(child); - return -EINVAL; } static int qt1050_probe(struct i2c_client *client) diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c index ad8660be0127..f7b5f1e25c80 100644 --- a/drivers/input/keyboard/snvs_pwrkey.c +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -100,11 +100,6 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static void imx_snvs_pwrkey_disable_clk(void *data) -{ - clk_disable_unprepare(data); -} - static void imx_snvs_pwrkey_act(void *pdata) { struct pwrkey_drv_data *pd = pdata; @@ -141,28 +136,12 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n"); } - clk = devm_clk_get_optional(&pdev->dev, NULL); + clk = devm_clk_get_optional_enabled(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk); return PTR_ERR(clk); } - error = clk_prepare_enable(clk); - if (error) { - dev_err(&pdev->dev, "Failed to enable snvs clock (%pe)\n", - ERR_PTR(error)); - return error; - } - - error = devm_add_action_or_reset(&pdev->dev, - imx_snvs_pwrkey_disable_clk, clk); - if (error) { - dev_err(&pdev->dev, - "Failed to register clock cleanup handler (%pe)\n", - ERR_PTR(error)); - return error; - } - pdata->wakeup = of_property_read_bool(np, "wakeup-source"); pdata->irq = platform_get_irq(pdev, 0); @@ -204,7 +183,6 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev) error = devm_request_irq(&pdev->dev, pdata->irq, imx_snvs_pwrkey_interrupt, 0, pdev->name, pdev); - if (error) { dev_err(&pdev->dev, "interrupt not available.\n"); return error; diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index 557d00a667ce..1df4feb8ba01 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -222,7 +222,7 @@ static int spear_kbd_probe(struct platform_device *pdev) if (IS_ERR(kbd->io_base)) return PTR_ERR(kbd->io_base); - kbd->clk = devm_clk_get(&pdev->dev, NULL); + kbd->clk = devm_clk_get_prepared(&pdev->dev, NULL); if (IS_ERR(kbd->clk)) return PTR_ERR(kbd->clk); @@ -255,14 +255,9 @@ static int spear_kbd_probe(struct platform_device *pdev) return error; } - error = clk_prepare(kbd->clk); - if (error) - return error; - error = input_register_device(input_dev); if (error) { dev_err(&pdev->dev, "Unable to register keyboard device\n"); - clk_unprepare(kbd->clk); return error; } @@ -272,14 +267,6 @@ static int spear_kbd_probe(struct platform_device *pdev) return 0; } -static void spear_kbd_remove(struct platform_device *pdev) -{ - struct spear_kbd *kbd = platform_get_drvdata(pdev); - - input_unregister_device(kbd->input); - clk_unprepare(kbd->clk); -} - static int spear_kbd_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -373,7 +360,6 @@ MODULE_DEVICE_TABLE(of, spear_kbd_id_table); static struct platform_driver spear_kbd_driver = { .probe = spear_kbd_probe, - .remove_new = spear_kbd_remove, .driver = { .name = "keyboard", .pm = pm_sleep_ptr(&spear_kbd_pm_ops), diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index b0d86621c60a..11988cffdfae 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -325,7 +325,6 @@ tc3589x_keypad_of_probe(struct device *dev) struct tc3589x_keypad_platform_data *plat; u32 cols, rows; u32 debounce_ms; - int proplen; if (!np) return ERR_PTR(-ENODEV); @@ -346,7 +345,7 @@ tc3589x_keypad_of_probe(struct device *dev) return ERR_PTR(-EINVAL); } - if (!of_get_property(np, "linux,keymap", &proplen)) { + if (!of_property_present(np, "linux,keymap")) { dev_err(dev, "property linux,keymap not found\n"); return ERR_PTR(-ENOENT); } diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index a1765ed8c825..6776dd94ce76 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -241,11 +241,10 @@ static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable) static void tegra_kbc_keypress_timer(struct timer_list *t) { struct tegra_kbc *kbc = from_timer(kbc, t, timer); - unsigned long flags; u32 val; unsigned int i; - spin_lock_irqsave(&kbc->lock, flags); + guard(spinlock_irqsave)(&kbc->lock); val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf; if (val) { @@ -270,17 +269,14 @@ static void tegra_kbc_keypress_timer(struct timer_list *t) /* All keys are released so enable the keypress interrupt */ tegra_kbc_set_fifo_interrupt(kbc, true); } - - spin_unlock_irqrestore(&kbc->lock, flags); } static irqreturn_t tegra_kbc_isr(int irq, void *args) { struct tegra_kbc *kbc = args; - unsigned long flags; u32 val; - spin_lock_irqsave(&kbc->lock, flags); + guard(spinlock_irqsave)(&kbc->lock); /* * Quickly bail out & reenable interrupts if the fifo threshold @@ -301,8 +297,6 @@ static irqreturn_t tegra_kbc_isr(int irq, void *args) kbc->keypress_caused_wake = true; } - spin_unlock_irqrestore(&kbc->lock, flags); - return IRQ_HANDLED; } @@ -413,14 +407,13 @@ static int tegra_kbc_start(struct tegra_kbc *kbc) static void tegra_kbc_stop(struct tegra_kbc *kbc) { - unsigned long flags; u32 val; - spin_lock_irqsave(&kbc->lock, flags); - val = readl(kbc->mmio + KBC_CONTROL_0); - val &= ~1; - writel(val, kbc->mmio + KBC_CONTROL_0); - spin_unlock_irqrestore(&kbc->lock, flags); + scoped_guard(spinlock_irqsave, &kbc->lock) { + val = readl(kbc->mmio + KBC_CONTROL_0); + val &= ~1; + writel(val, kbc->mmio + KBC_CONTROL_0); + } disable_irq(kbc->irq); del_timer_sync(&kbc->timer); @@ -491,12 +484,10 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) struct device_node *np = kbc->dev->of_node; u32 prop; int i; - u32 num_rows = 0; - u32 num_cols = 0; + int num_rows; + int num_cols; u32 cols_cfg[KBC_MAX_GPIO]; u32 rows_cfg[KBC_MAX_GPIO]; - int proplen; - int ret; if (!of_property_read_u32(np, "nvidia,debounce-delay-ms", &prop)) kbc->debounce_cnt = prop; @@ -510,56 +501,23 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) of_property_read_bool(np, "nvidia,wakeup-source")) /* legacy */ kbc->wakeup = true; - if (!of_get_property(np, "nvidia,kbc-row-pins", &proplen)) { - dev_err(kbc->dev, "property nvidia,kbc-row-pins not found\n"); - return -ENOENT; - } - num_rows = proplen / sizeof(u32); - - if (!of_get_property(np, "nvidia,kbc-col-pins", &proplen)) { - dev_err(kbc->dev, "property nvidia,kbc-col-pins not found\n"); - return -ENOENT; - } - num_cols = proplen / sizeof(u32); - - if (num_rows > kbc->hw_support->max_rows) { - dev_err(kbc->dev, - "Number of rows is more than supported by hardware\n"); - return -EINVAL; - } - - if (num_cols > kbc->hw_support->max_columns) { - dev_err(kbc->dev, - "Number of cols is more than supported by hardware\n"); - return -EINVAL; - } - - if (!of_get_property(np, "linux,keymap", &proplen)) { + if (!of_property_present(np, "linux,keymap")) { dev_err(kbc->dev, "property linux,keymap not found\n"); return -ENOENT; } - if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) { - dev_err(kbc->dev, - "keypad rows/columns not properly specified\n"); - return -EINVAL; - } - /* Set all pins as non-configured */ for (i = 0; i < kbc->num_rows_and_columns; i++) kbc->pin_cfg[i].type = PIN_CFG_IGNORE; - ret = of_property_read_u32_array(np, "nvidia,kbc-row-pins", - rows_cfg, num_rows); - if (ret < 0) { + num_rows = of_property_read_variable_u32_array(np, "nvidia,kbc-row-pins", + rows_cfg, 1, KBC_MAX_GPIO); + if (num_rows < 0) { dev_err(kbc->dev, "Rows configurations are not proper\n"); - return -EINVAL; - } - - ret = of_property_read_u32_array(np, "nvidia,kbc-col-pins", - cols_cfg, num_cols); - if (ret < 0) { - dev_err(kbc->dev, "Cols configurations are not proper\n"); + return num_rows; + } else if (num_rows > kbc->hw_support->max_rows) { + dev_err(kbc->dev, + "Number of rows is more than supported by hardware\n"); return -EINVAL; } @@ -568,11 +526,28 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) kbc->pin_cfg[rows_cfg[i]].num = i; } + num_cols = of_property_read_variable_u32_array(np, "nvidia,kbc-col-pins", + cols_cfg, 1, KBC_MAX_GPIO); + if (num_cols < 0) { + dev_err(kbc->dev, "Cols configurations are not proper\n"); + return num_cols; + } else if (num_cols > kbc->hw_support->max_columns) { + dev_err(kbc->dev, + "Number of cols is more than supported by hardware\n"); + return -EINVAL; + } + for (i = 0; i < num_cols; i++) { kbc->pin_cfg[cols_cfg[i]].type = PIN_CFG_COL; kbc->pin_cfg[cols_cfg[i]].num = i; } + if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) { + dev_err(kbc->dev, + "keypad rows/columns not properly specified\n"); + return -EINVAL; + } + return 0; } @@ -724,7 +699,8 @@ static int tegra_kbc_suspend(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct tegra_kbc *kbc = platform_get_drvdata(pdev); - mutex_lock(&kbc->idev->mutex); + guard(mutex)(&kbc->idev->mutex); + if (device_may_wakeup(&pdev->dev)) { disable_irq(kbc->irq); del_timer_sync(&kbc->timer); @@ -747,11 +723,9 @@ static int tegra_kbc_suspend(struct device *dev) tegra_kbc_set_keypress_interrupt(kbc, true); enable_irq(kbc->irq); enable_irq_wake(kbc->irq); - } else { - if (input_device_enabled(kbc->idev)) - tegra_kbc_stop(kbc); + } else if (input_device_enabled(kbc->idev)) { + tegra_kbc_stop(kbc); } - mutex_unlock(&kbc->idev->mutex); return 0; } @@ -760,9 +734,10 @@ static int tegra_kbc_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct tegra_kbc *kbc = platform_get_drvdata(pdev); - int err = 0; + int err; + + guard(mutex)(&kbc->idev->mutex); - mutex_lock(&kbc->idev->mutex); if (device_may_wakeup(&pdev->dev)) { disable_irq_wake(kbc->irq); tegra_kbc_setup_wakekeys(kbc, false); @@ -787,13 +762,13 @@ static int tegra_kbc_resume(struct device *dev) input_report_key(kbc->idev, kbc->wakeup_key, 0); input_sync(kbc->idev); } - } else { - if (input_device_enabled(kbc->idev)) - err = tegra_kbc_start(kbc); + } else if (input_device_enabled(kbc->idev)) { + err = tegra_kbc_start(kbc); + if (err) + return err; } - mutex_unlock(&kbc->idev->mutex); - return err; + return 0; } static DEFINE_SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c index 5d93043bad8e..3bea3575a0a9 100644 --- a/drivers/input/matrix-keymap.c +++ b/drivers/input/matrix-keymap.c @@ -73,10 +73,9 @@ static int matrix_keypad_parse_keymap(const char *propname, struct device *dev = input_dev->dev.parent; unsigned int row_shift = get_count_order(cols); unsigned int max_keys = rows << row_shift; - u32 *keys; int i; int size; - int retval; + int error; if (!propname) propname = "linux,keymap"; @@ -94,30 +93,24 @@ static int matrix_keypad_parse_keymap(const char *propname, return -EINVAL; } - keys = kmalloc_array(size, sizeof(u32), GFP_KERNEL); + u32 *keys __free(kfree) = kmalloc_array(size, sizeof(*keys), GFP_KERNEL); if (!keys) return -ENOMEM; - retval = device_property_read_u32_array(dev, propname, keys, size); - if (retval) { + error = device_property_read_u32_array(dev, propname, keys, size); + if (error) { dev_err(dev, "failed to read %s property: %d\n", - propname, retval); - goto out; + propname, error); + return error; } for (i = 0; i < size; i++) { if (!matrix_keypad_map_key(input_dev, rows, cols, - row_shift, keys[i])) { - retval = -EINVAL; - goto out; - } + row_shift, keys[i])) + return -EINVAL; } - retval = 0; - -out: - kfree(keys); - return retval; + return 0; } /** diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c index c086dadb45e3..058f3470b7ae 100644 --- a/drivers/input/misc/ims-pcu.c +++ b/drivers/input/misc/ims-pcu.c @@ -1067,7 +1067,7 @@ static ssize_t ims_pcu_attribute_store(struct device *dev, if (data_len > attr->field_length) return -EINVAL; - scoped_cond_guard(mutex, return -EINTR, &pcu->cmd_mutex) { + scoped_cond_guard(mutex_intr, return -EINTR, &pcu->cmd_mutex) { memset(field, 0, attr->field_length); memcpy(field, buf, data_len); diff --git a/drivers/input/misc/iqs269a.c b/drivers/input/misc/iqs269a.c index cd14ff9f57cf..843f8a3f3410 100644 --- a/drivers/input/misc/iqs269a.c +++ b/drivers/input/misc/iqs269a.c @@ -811,7 +811,6 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269) { struct iqs269_sys_reg *sys_reg = &iqs269->sys_reg; struct i2c_client *client = iqs269->client; - struct fwnode_handle *ch_node; u16 general, misc_a, misc_b; unsigned int val; int error; @@ -1049,12 +1048,10 @@ static int iqs269_parse_prop(struct iqs269_private *iqs269) sys_reg->event_mask = ~((u8)IQS269_EVENT_MASK_SYS); - device_for_each_child_node(&client->dev, ch_node) { + device_for_each_child_node_scoped(&client->dev, ch_node) { error = iqs269_parse_chan(iqs269, ch_node); - if (error) { - fwnode_handle_put(ch_node); + if (error) return error; - } } /* diff --git a/drivers/input/misc/nxp-bbnsm-pwrkey.c b/drivers/input/misc/nxp-bbnsm-pwrkey.c index 1d99206dd3a8..eb4173f9c820 100644 --- a/drivers/input/misc/nxp-bbnsm-pwrkey.c +++ b/drivers/input/misc/nxp-bbnsm-pwrkey.c @@ -38,6 +38,7 @@ struct bbnsm_pwrkey { int irq; int keycode; int keystate; /* 1:pressed */ + bool suspended; struct timer_list check_timer; struct input_dev *input; }; @@ -70,6 +71,7 @@ static irqreturn_t bbnsm_pwrkey_interrupt(int irq, void *dev_id) { struct platform_device *pdev = dev_id; struct bbnsm_pwrkey *bbnsm = platform_get_drvdata(pdev); + struct input_dev *input = bbnsm->input; u32 event; regmap_read(bbnsm->regmap, BBNSM_EVENTS, &event); @@ -78,6 +80,18 @@ static irqreturn_t bbnsm_pwrkey_interrupt(int irq, void *dev_id) pm_wakeup_event(bbnsm->input->dev.parent, 0); + /* + * Directly report key event after resume to make sure key press + * event is never missed. + */ + if (bbnsm->suspended) { + bbnsm->keystate = 1; + input_event(input, EV_KEY, bbnsm->keycode, 1); + input_sync(input); + /* Fire at most once per suspend/resume cycle */ + bbnsm->suspended = false; + } + mod_timer(&bbnsm->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME)); @@ -173,6 +187,29 @@ static int bbnsm_pwrkey_probe(struct platform_device *pdev) return 0; } +static int __maybe_unused bbnsm_pwrkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct bbnsm_pwrkey *bbnsm = platform_get_drvdata(pdev); + + bbnsm->suspended = true; + + return 0; +} + +static int __maybe_unused bbnsm_pwrkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct bbnsm_pwrkey *bbnsm = platform_get_drvdata(pdev); + + bbnsm->suspended = false; + + return 0; +} + +static SIMPLE_DEV_PM_OPS(bbnsm_pwrkey_pm_ops, bbnsm_pwrkey_suspend, + bbnsm_pwrkey_resume); + static const struct of_device_id bbnsm_pwrkey_ids[] = { { .compatible = "nxp,imx93-bbnsm-pwrkey" }, { /* sentinel */ } @@ -182,6 +219,7 @@ MODULE_DEVICE_TABLE(of, bbnsm_pwrkey_ids); static struct platform_driver bbnsm_pwrkey_driver = { .driver = { .name = "bbnsm_pwrkey", + .pm = &bbnsm_pwrkey_pm_ops, .of_match_table = bbnsm_pwrkey_ids, }, .probe = bbnsm_pwrkey_probe, diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 39d6f642cd19..5a64557920fa 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -990,8 +990,8 @@ static int __init copy_keymap(void) for (key = keymap; key->type != KE_END; key++) length++; - new_keymap = kmemdup(keymap, length * sizeof(struct key_entry), - GFP_KERNEL); + new_keymap = kmemdup_array(keymap, length, sizeof(struct key_entry), + GFP_KERNEL); if (!new_keymap) return -ENOMEM; diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 833b643f0616..8a27a20d04b0 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -69,6 +69,18 @@ config MOUSE_PS2_LOGIPS2PP If unsure, say Y. +config MOUSE_PS2_PIXART + bool "PixArt PS/2 touchpad protocol extension" if EXPERT + default y + depends on MOUSE_PS2 + help + This driver supports the PixArt PS/2 touchpad found in some + laptops. + Say Y here if you have a PixArt PS/2 TouchPad connected to + your system. + + If unsure, say Y. + config MOUSE_PS2_SYNAPTICS bool "Synaptics PS/2 mouse protocol extension" if EXPERT default y diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index a1336d5bee6f..563029551529 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -32,6 +32,7 @@ psmouse-$(CONFIG_MOUSE_PS2_ELANTECH) += elantech.o psmouse-$(CONFIG_MOUSE_PS2_OLPC) += hgpk.o psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) += logips2pp.o psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o +psmouse-$(CONFIG_MOUSE_PS2_PIXART) += pixart_ps2.o psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index d5ef5a112d6f..4e37fc3f1a9e 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -1396,24 +1396,16 @@ static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse) static DEFINE_MUTEX(alps_mutex); -static void alps_register_bare_ps2_mouse(struct work_struct *work) +static int alps_do_register_bare_ps2_mouse(struct alps_data *priv) { - struct alps_data *priv = - container_of(work, struct alps_data, dev3_register_work.work); struct psmouse *psmouse = priv->psmouse; struct input_dev *dev3; - int error = 0; - - mutex_lock(&alps_mutex); - - if (priv->dev3) - goto out; + int error; dev3 = input_allocate_device(); if (!dev3) { psmouse_err(psmouse, "failed to allocate secondary device\n"); - error = -ENOMEM; - goto out; + return -ENOMEM; } snprintf(priv->phys3, sizeof(priv->phys3), "%s/%s", @@ -1446,21 +1438,35 @@ static void alps_register_bare_ps2_mouse(struct work_struct *work) psmouse_err(psmouse, "failed to register secondary device: %d\n", error); - input_free_device(dev3); - goto out; + goto err_free_input; } priv->dev3 = dev3; + return 0; -out: - /* - * Save the error code so that we can detect that we - * already tried to create the device. - */ - if (error) - priv->dev3 = ERR_PTR(error); +err_free_input: + input_free_device(dev3); + return error; +} - mutex_unlock(&alps_mutex); +static void alps_register_bare_ps2_mouse(struct work_struct *work) +{ + struct alps_data *priv = container_of(work, struct alps_data, + dev3_register_work.work); + int error; + + guard(mutex)(&alps_mutex); + + if (!priv->dev3) { + error = alps_do_register_bare_ps2_mouse(priv); + if (error) { + /* + * Save the error code so that we can detect that we + * already tried to create the device. + */ + priv->dev3 = ERR_PTR(error); + } + } } static void alps_report_bare_ps2_packet(struct psmouse *psmouse, diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 10a03a566905..dfdfb59cc8b5 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -834,13 +834,11 @@ static int bcm5974_open(struct input_dev *input) if (error) return error; - mutex_lock(&dev->pm_mutex); - - error = bcm5974_start_traffic(dev); - if (!error) - dev->opened = 1; - - mutex_unlock(&dev->pm_mutex); + scoped_guard(mutex, &dev->pm_mutex) { + error = bcm5974_start_traffic(dev); + if (!error) + dev->opened = 1; + } if (error) usb_autopm_put_interface(dev->intf); @@ -852,12 +850,10 @@ static void bcm5974_close(struct input_dev *input) { struct bcm5974 *dev = input_get_drvdata(input); - mutex_lock(&dev->pm_mutex); - - bcm5974_pause_traffic(dev); - dev->opened = 0; - - mutex_unlock(&dev->pm_mutex); + scoped_guard(mutex, &dev->pm_mutex) { + bcm5974_pause_traffic(dev); + dev->opened = 0; + } usb_autopm_put_interface(dev->intf); } @@ -866,29 +862,24 @@ static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message) { struct bcm5974 *dev = usb_get_intfdata(iface); - mutex_lock(&dev->pm_mutex); + guard(mutex)(&dev->pm_mutex); if (dev->opened) bcm5974_pause_traffic(dev); - mutex_unlock(&dev->pm_mutex); - return 0; } static int bcm5974_resume(struct usb_interface *iface) { struct bcm5974 *dev = usb_get_intfdata(iface); - int error = 0; - mutex_lock(&dev->pm_mutex); + guard(mutex)(&dev->pm_mutex); if (dev->opened) - error = bcm5974_start_traffic(dev); + return bcm5974_start_traffic(dev); - mutex_unlock(&dev->pm_mutex); - - return error; + return 0; } static int bcm5974_probe(struct usb_interface *iface, diff --git a/drivers/input/mouse/pixart_ps2.c b/drivers/input/mouse/pixart_ps2.c new file mode 100644 index 000000000000..1993fc760d7b --- /dev/null +++ b/drivers/input/mouse/pixart_ps2.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Pixart Touchpad Controller 1336U PS2 driver + * + * Author: Jon Xie <jon_xie@pixart.com> + * Jay Lee <jay_lee@pixart.com> + * Further cleanup and restructuring by: + * Binbin Zhou <zhoubinbin@loongson.cn> + * + * Copyright (C) 2021-2024 Pixart Imaging. + * Copyright (C) 2024 Loongson Technology Corporation Limited. + * + */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/libps2.h> +#include <linux/serio.h> +#include <linux/slab.h> + +#include "pixart_ps2.h" + +static int pixart_read_tp_mode(struct ps2dev *ps2dev, u8 *mode) +{ + int error; + u8 param[1] = { 0 }; + + error = ps2_command(ps2dev, param, PIXART_CMD_REPORT_FORMAT); + if (error) + return error; + + *mode = param[0] == 1 ? PIXART_MODE_ABS : PIXART_MODE_REL; + + return 0; +} + +static int pixart_read_tp_type(struct ps2dev *ps2dev, u8 *type) +{ + int error; + u8 param[3] = { 0 }; + + param[0] = 0x0a; + error = ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); + if (error) + return error; + + param[0] = 0x0; + error = ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES); + if (error) + return error; + + error = ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES); + if (error) + return error; + + error = ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES); + if (error) + return error; + + param[0] = 0x03; + error = ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES); + if (error) + return error; + + error = ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO); + if (error) + return error; + + *type = param[0] == 0x0e ? PIXART_TYPE_TOUCHPAD : PIXART_TYPE_CLICKPAD; + + return 0; +} + +static void pixart_reset(struct psmouse *psmouse) +{ + ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); + + /* according to PixArt, 100ms is required for the upcoming reset */ + msleep(100); + psmouse_reset(psmouse); +} + +static void pixart_process_packet(struct psmouse *psmouse) +{ + struct pixart_data *priv = psmouse->private; + struct input_dev *dev = psmouse->dev; + const u8 *pkt = psmouse->packet; + unsigned int contact_cnt = FIELD_GET(CONTACT_CNT_MASK, pkt[0]); + unsigned int i, id, abs_x, abs_y; + bool tip; + + for (i = 0; i < contact_cnt; i++) { + const u8 *p = &pkt[i * 3]; + + id = FIELD_GET(SLOT_ID_MASK, p[3]); + abs_y = FIELD_GET(ABS_Y_MASK, p[3]) << 8 | p[1]; + abs_x = FIELD_GET(ABS_X_MASK, p[3]) << 8 | p[2]; + + if (i == PIXART_MAX_FINGERS - 1) + tip = pkt[14] & BIT(1); + else + tip = pkt[3 * contact_cnt + 1] & BIT(2 * i + 1); + + input_mt_slot(dev, id); + if (input_mt_report_slot_state(dev, MT_TOOL_FINGER, tip)) { + input_report_abs(dev, ABS_MT_POSITION_Y, abs_y); + input_report_abs(dev, ABS_MT_POSITION_X, abs_x); + } + } + + input_mt_sync_frame(dev); + + if (priv->type == PIXART_TYPE_CLICKPAD) { + input_report_key(dev, BTN_LEFT, pkt[0] & 0x03); + } else { + input_report_key(dev, BTN_LEFT, pkt[0] & BIT(0)); + input_report_key(dev, BTN_RIGHT, pkt[0] & BIT(1)); + } + + input_sync(dev); +} + +static psmouse_ret_t pixart_protocol_handler(struct psmouse *psmouse) +{ + u8 *pkt = psmouse->packet; + u8 contact_cnt; + + if ((pkt[0] & 0x8c) != 0x80) + return PSMOUSE_BAD_DATA; + + contact_cnt = FIELD_GET(CONTACT_CNT_MASK, pkt[0]); + if (contact_cnt > PIXART_MAX_FINGERS) + return PSMOUSE_BAD_DATA; + + if (contact_cnt == PIXART_MAX_FINGERS && + psmouse->pktcnt < psmouse->pktsize) { + return PSMOUSE_GOOD_DATA; + } + + if (contact_cnt == 0 && psmouse->pktcnt < 5) + return PSMOUSE_GOOD_DATA; + + if (psmouse->pktcnt < 3 * contact_cnt + 2) + return PSMOUSE_GOOD_DATA; + + pixart_process_packet(psmouse); + + return PSMOUSE_FULL_PACKET; +} + +static void pixart_disconnect(struct psmouse *psmouse) +{ + pixart_reset(psmouse); + kfree(psmouse->private); + psmouse->private = NULL; +} + +static int pixart_reconnect(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + u8 mode; + int error; + + pixart_reset(psmouse); + + error = pixart_read_tp_mode(ps2dev, &mode); + if (error) + return error; + + if (mode != PIXART_MODE_ABS) + return -EIO; + + error = ps2_command(ps2dev, NULL, PIXART_CMD_SWITCH_PROTO); + if (error) + return error; + + return 0; +} + +static int pixart_set_input_params(struct input_dev *dev, + struct pixart_data *priv) +{ + /* No relative support */ + __clear_bit(EV_REL, dev->evbit); + __clear_bit(REL_X, dev->relbit); + __clear_bit(REL_Y, dev->relbit); + __clear_bit(BTN_MIDDLE, dev->keybit); + + /* Buttons */ + __set_bit(EV_KEY, dev->evbit); + __set_bit(BTN_LEFT, dev->keybit); + if (priv->type == PIXART_TYPE_CLICKPAD) + __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); + else + __set_bit(BTN_RIGHT, dev->keybit); + + /* Absolute position */ + input_set_abs_params(dev, ABS_X, 0, PIXART_PAD_WIDTH, 0, 0); + input_set_abs_params(dev, ABS_Y, 0, PIXART_PAD_HEIGHT, 0, 0); + + input_set_abs_params(dev, ABS_MT_POSITION_X, + 0, PIXART_PAD_WIDTH, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, + 0, PIXART_PAD_HEIGHT, 0, 0); + + return input_mt_init_slots(dev, PIXART_MAX_FINGERS, INPUT_MT_POINTER); +} + +static int pixart_query_hardware(struct ps2dev *ps2dev, u8 *mode, u8 *type) +{ + int error; + + error = pixart_read_tp_type(ps2dev, type); + if (error) + return error; + + error = pixart_read_tp_mode(ps2dev, mode); + if (error) + return error; + + return 0; +} + +int pixart_detect(struct psmouse *psmouse, bool set_properties) +{ + u8 type; + int error; + + pixart_reset(psmouse); + + error = pixart_read_tp_type(&psmouse->ps2dev, &type); + if (error) + return error; + + if (set_properties) { + psmouse->vendor = "PixArt"; + psmouse->name = (type == PIXART_TYPE_TOUCHPAD) ? + "touchpad" : "clickpad"; + } + + return 0; +} + +int pixart_init(struct psmouse *psmouse) +{ + int error; + struct pixart_data *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + psmouse->private = priv; + pixart_reset(psmouse); + + error = pixart_query_hardware(&psmouse->ps2dev, + &priv->mode, &priv->type); + if (error) { + psmouse_err(psmouse, "init: Unable to query PixArt touchpad hardware.\n"); + goto err_exit; + } + + /* Relative mode follows standard PS/2 mouse protocol */ + if (priv->mode != PIXART_MODE_ABS) { + error = -EIO; + goto err_exit; + } + + /* Set absolute mode */ + error = ps2_command(&psmouse->ps2dev, NULL, PIXART_CMD_SWITCH_PROTO); + if (error) { + psmouse_err(psmouse, "init: Unable to initialize PixArt absolute mode.\n"); + goto err_exit; + } + + error = pixart_set_input_params(psmouse->dev, priv); + if (error) { + psmouse_err(psmouse, "init: Unable to set input params.\n"); + goto err_exit; + } + + psmouse->pktsize = 15; + psmouse->protocol_handler = pixart_protocol_handler; + psmouse->disconnect = pixart_disconnect; + psmouse->reconnect = pixart_reconnect; + psmouse->cleanup = pixart_reset; + /* resync is not supported yet */ + psmouse->resync_time = 0; + + return 0; + +err_exit: + pixart_reset(psmouse); + kfree(priv); + psmouse->private = NULL; + return error; +} diff --git a/drivers/input/mouse/pixart_ps2.h b/drivers/input/mouse/pixart_ps2.h new file mode 100644 index 000000000000..47a1d040f2d1 --- /dev/null +++ b/drivers/input/mouse/pixart_ps2.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _PIXART_PS2_H +#define _PIXART_PS2_H + +#include "psmouse.h" + +#define PIXART_PAD_WIDTH 1023 +#define PIXART_PAD_HEIGHT 579 +#define PIXART_MAX_FINGERS 4 + +#define PIXART_CMD_REPORT_FORMAT 0x01d8 +#define PIXART_CMD_SWITCH_PROTO 0x00de + +#define PIXART_MODE_REL 0 +#define PIXART_MODE_ABS 1 + +#define PIXART_TYPE_CLICKPAD 0 +#define PIXART_TYPE_TOUCHPAD 1 + +#define CONTACT_CNT_MASK GENMASK(6, 4) + +#define SLOT_ID_MASK GENMASK(2, 0) +#define ABS_Y_MASK GENMASK(5, 4) +#define ABS_X_MASK GENMASK(7, 6) + +struct pixart_data { + u8 mode; + u8 type; + int x_max; + int y_max; +}; + +int pixart_detect(struct psmouse *psmouse, bool set_properties); +int pixart_init(struct psmouse *psmouse); + +#endif /* _PIXART_PS2_H */ diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index a2c9f7144864..5a4defe9cf32 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -36,6 +36,7 @@ #include "focaltech.h" #include "vmmouse.h" #include "byd.h" +#include "pixart_ps2.h" #define DRIVER_DESC "PS/2 mouse driver" @@ -906,6 +907,15 @@ static const struct psmouse_protocol psmouse_protocols[] = { .init = byd_init, }, #endif +#ifdef CONFIG_MOUSE_PS2_PIXART + { + .type = PSMOUSE_PIXART, + .name = "PixArtPS/2", + .alias = "pixart", + .detect = pixart_detect, + .init = pixart_init, + }, +#endif { .type = PSMOUSE_AUTO, .name = "auto", @@ -1172,6 +1182,13 @@ static int psmouse_extensions(struct psmouse *psmouse, return ret; } + /* Try PixArt touchpad */ + if (max_proto > PSMOUSE_IMEX && + psmouse_try_protocol(psmouse, PSMOUSE_PIXART, &max_proto, + set_properties, true)) { + return PSMOUSE_PIXART; + } + if (max_proto > PSMOUSE_IMEX) { if (psmouse_try_protocol(psmouse, PSMOUSE_GENPS, &max_proto, set_properties, true)) diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 4d8acfe0d82a..23f7fa7243cb 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -69,6 +69,7 @@ enum psmouse_type { PSMOUSE_BYD, PSMOUSE_SYNAPTICS_SMBUS, PSMOUSE_ELANTECH_SMBUS, + PSMOUSE_PIXART, PSMOUSE_AUTO /* This one should always be last */ }; @@ -94,7 +95,7 @@ struct psmouse { const char *vendor; const char *name; const struct psmouse_protocol *protocol; - unsigned char packet[8]; + unsigned char packet[16]; unsigned char badbyte; unsigned char pktcnt; unsigned char pktsize; diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c index 7e97944f7616..8246fe77114b 100644 --- a/drivers/input/rmi4/rmi_f12.c +++ b/drivers/input/rmi4/rmi_f12.c @@ -24,6 +24,7 @@ enum rmi_f12_object_type { }; #define F12_DATA1_BYTES_PER_OBJ 8 +#define RMI_F12_QUERY_RESOLUTION 29 struct f12_data { struct rmi_2d_sensor sensor; @@ -73,6 +74,8 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) int pitch_y = 0; int rx_receivers = 0; int tx_receivers = 0; + u16 query_dpm_addr = 0; + int dpm_resolution = 0; item = rmi_get_register_desc_item(&f12->control_reg_desc, 8); if (!item) { @@ -122,18 +125,38 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12) offset += 4; } - if (rmi_register_desc_has_subpacket(item, 3)) { - rx_receivers = buf[offset]; - tx_receivers = buf[offset + 1]; - offset += 2; - } + /* + * Use the Query DPM feature when the resolution query register + * exists. + */ + if (rmi_get_register_desc_item(&f12->query_reg_desc, + RMI_F12_QUERY_RESOLUTION)) { + offset = rmi_register_desc_calc_reg_offset(&f12->query_reg_desc, + RMI_F12_QUERY_RESOLUTION); + query_dpm_addr = fn->fd.query_base_addr + offset; + ret = rmi_read(fn->rmi_dev, query_dpm_addr, buf); + if (ret < 0) { + dev_err(&fn->dev, "Failed to read DPM value: %d\n", ret); + return -ENODEV; + } + dpm_resolution = buf[0]; - /* Skip over sensor flags */ - if (rmi_register_desc_has_subpacket(item, 4)) - offset += 1; + sensor->x_mm = sensor->max_x / dpm_resolution; + sensor->y_mm = sensor->max_y / dpm_resolution; + } else { + if (rmi_register_desc_has_subpacket(item, 3)) { + rx_receivers = buf[offset]; + tx_receivers = buf[offset + 1]; + offset += 2; + } - sensor->x_mm = (pitch_x * rx_receivers) >> 12; - sensor->y_mm = (pitch_y * tx_receivers) >> 12; + /* Skip over sensor flags */ + if (rmi_register_desc_has_subpacket(item, 4)) + offset += 1; + + sensor->x_mm = (pitch_x * rx_receivers) >> 12; + sensor->y_mm = (pitch_y * tx_receivers) >> 12; + } rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x_mm: %d y_mm: %d\n", __func__, sensor->x_mm, sensor->y_mm); diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index bad238f69a7a..34d1f07ea4c3 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -1121,6 +1121,43 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOLOOP) }, /* + * Some TongFang barebones have touchpad and/or keyboard issues after + * suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of + * them have an external PS/2 port so this can safely be set for all of + * them. + * TongFang barebones come with board_vendor and/or system_vendor set to + * a different value for each individual reseller. The only somewhat + * universal way to identify them is by board_name. + */ + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GM6XGxX"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxXGxx"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxXGxX"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GMxHGxx"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + /* * A lot of modern Clevo barebones have touchpad and/or keyboard issues * after suspend fixable with nomux + reset + noloop + nopnp. Luckily, * none of them have an external PS/2 port so this can safely be set for diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c index 0c8b390b8b4f..3a431395c464 100644 --- a/drivers/input/serio/ps2-gpio.c +++ b/drivers/input/serio/ps2-gpio.c @@ -429,16 +429,14 @@ static int ps2_gpio_probe(struct platform_device *pdev) } error = devm_request_irq(dev, drvdata->irq, ps2_gpio_irq, - IRQF_NO_THREAD, DRIVER_NAME, drvdata); + IRQF_NO_THREAD | IRQF_NO_AUTOEN, DRIVER_NAME, + drvdata); if (error) { dev_err(dev, "failed to request irq %d: %d\n", drvdata->irq, error); goto err_free_serio; } - /* Keep irq disabled until serio->open is called. */ - disable_irq(drvdata->irq); - serio->id.type = SERIO_8042; serio->open = ps2_gpio_open; serio->close = ps2_gpio_close; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index c821fe3ee794..1ac26fc2e3eb 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -254,36 +254,6 @@ config TOUCHSCREEN_CYTTSP_SPI To compile this driver as a module, choose M here: the module will be called cyttsp_spi. -config TOUCHSCREEN_CYTTSP4_CORE - tristate "Cypress TrueTouch Gen4 Touchscreen Driver" - help - Core driver for Cypress TrueTouch(tm) Standard Product - Generation4 touchscreen controllers. - - Say Y here if you have a Cypress Gen4 touchscreen. - - If unsure, say N. - - To compile this driver as a module, choose M here. - -config TOUCHSCREEN_CYTTSP4_I2C - tristate "support I2C bus connection" - depends on TOUCHSCREEN_CYTTSP4_CORE && I2C - help - Say Y here if the touchscreen is connected via I2C bus. - - To compile this driver as a module, choose M here: the - module will be called cyttsp4_i2c. - -config TOUCHSCREEN_CYTTSP4_SPI - tristate "support SPI bus connection" - depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER - help - Say Y here if the touchscreen is connected via SPI bus. - - To compile this driver as a module, choose M here: the - module will be called cyttsp4_spi. - config TOUCHSCREEN_CYTTSP5 tristate "Cypress TrueTouch Gen5 Touchscreen Driver" depends on I2C @@ -626,18 +596,6 @@ config TOUCHSCREEN_MAX11801 To compile this driver as a module, choose M here: the module will be called max11801_ts. -config TOUCHSCREEN_MCS5000 - tristate "MELFAS MCS-5000 touchscreen" - depends on I2C - help - Say Y here if you have the MELFAS MCS-5000 touchscreen controller - chip in your system. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called mcs5000_ts. - config TOUCHSCREEN_MMS114 tristate "MELFAS MMS114 touchscreen" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index a81cb5aa21a5..82bc837ca01e 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -25,11 +25,8 @@ obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505) += chipone_icn8505.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMA140) += cy8ctma140.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE) += cyttsp4_core.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C) += cyttsp4_i2c.o cyttsp_i2c_common.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP5) += cyttsp5.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o @@ -63,7 +60,6 @@ obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o obj-$(CONFIG_TOUCHSCREEN_MXS_LRADC) += mxs-lradc-ts.o obj-$(CONFIG_TOUCHSCREEN_MX25) += fsl-imx25-tcq.o obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o -obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o obj-$(CONFIG_TOUCHSCREEN_MELFAS_MIP4) += melfas_mip4.o obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o diff --git a/drivers/input/touchscreen/colibri-vf50-ts.c b/drivers/input/touchscreen/colibri-vf50-ts.c index aa829725ded7..98d5b2ba63fb 100644 --- a/drivers/input/touchscreen/colibri-vf50-ts.c +++ b/drivers/input/touchscreen/colibri-vf50-ts.c @@ -239,14 +239,10 @@ static void vf50_ts_close(struct input_dev *dev_input) static int vf50_ts_get_gpiod(struct device *dev, struct gpio_desc **gpio_d, const char *con_id, enum gpiod_flags flags) { - int error; - *gpio_d = devm_gpiod_get(dev, con_id, flags); - if (IS_ERR(*gpio_d)) { - error = PTR_ERR(*gpio_d); - dev_err(dev, "Could not get gpio_%s %d\n", con_id, error); - return error; - } + if (IS_ERR(*gpio_d)) + return dev_err_probe(dev, PTR_ERR(*gpio_d), + "Could not get gpio_%s\n", con_id); return 0; } diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c deleted file mode 100644 index 9dc25eb2be44..000000000000 --- a/drivers/input/touchscreen/cyttsp4_core.c +++ /dev/null @@ -1,2174 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * cyttsp4_core.c - * Cypress TrueTouch(TM) Standard Product V4 Core driver module. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2012 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com> - */ - -#include "cyttsp4_core.h" -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/input/mt.h> -#include <linux/interrupt.h> -#include <linux/pm_runtime.h> -#include <linux/sched.h> -#include <linux/slab.h> - -/* Timeout in ms. */ -#define CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT 500 -#define CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT 5000 -#define CY_CORE_MODE_CHANGE_TIMEOUT 1000 -#define CY_CORE_RESET_AND_WAIT_TIMEOUT 500 -#define CY_CORE_WAKEUP_TIMEOUT 500 - -#define CY_CORE_STARTUP_RETRY_COUNT 3 - -static const char * const cyttsp4_tch_abs_string[] = { - [CY_TCH_X] = "X", - [CY_TCH_Y] = "Y", - [CY_TCH_P] = "P", - [CY_TCH_T] = "T", - [CY_TCH_E] = "E", - [CY_TCH_O] = "O", - [CY_TCH_W] = "W", - [CY_TCH_MAJ] = "MAJ", - [CY_TCH_MIN] = "MIN", - [CY_TCH_OR] = "OR", - [CY_TCH_NUM_ABS] = "INVALID" -}; - -static const u8 ldr_exit[] = { - 0xFF, 0x01, 0x3B, 0x00, 0x00, 0x4F, 0x6D, 0x17 -}; - -static const u8 ldr_err_app[] = { - 0x01, 0x02, 0x00, 0x00, 0x55, 0xDD, 0x17 -}; - -static inline size_t merge_bytes(u8 high, u8 low) -{ - return (high << 8) + low; -} - -#ifdef VERBOSE_DEBUG -static void cyttsp4_pr_buf(struct device *dev, u8 *pr_buf, u8 *dptr, int size, - const char *data_name) -{ - int i, k; - const char fmt[] = "%02X "; - int max; - - if (!size) - return; - - max = (CY_MAX_PRBUF_SIZE - 1) - sizeof(CY_PR_TRUNCATED); - - pr_buf[0] = 0; - for (i = k = 0; i < size && k < max; i++, k += 3) - scnprintf(pr_buf + k, CY_MAX_PRBUF_SIZE, fmt, dptr[i]); - - dev_vdbg(dev, "%s: %s[0..%d]=%s%s\n", __func__, data_name, size - 1, - pr_buf, size <= max ? "" : CY_PR_TRUNCATED); -} -#else -#define cyttsp4_pr_buf(dev, pr_buf, dptr, size, data_name) do { } while (0) -#endif - -static int cyttsp4_load_status_regs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - struct device *dev = cd->dev; - int rc; - - rc = cyttsp4_adap_read(cd, CY_REG_BASE, si->si_ofs.mode_size, - si->xy_mode); - if (rc < 0) - dev_err(dev, "%s: fail read mode regs r=%d\n", - __func__, rc); - else - cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_mode, - si->si_ofs.mode_size, "xy_mode"); - - return rc; -} - -static int cyttsp4_handshake(struct cyttsp4 *cd, u8 mode) -{ - u8 cmd = mode ^ CY_HST_TOGGLE; - int rc; - - /* - * Mode change issued, handshaking now will cause endless mode change - * requests, for sync mode modechange will do same with handshake - * */ - if (mode & CY_HST_MODE_CHANGE) - return 0; - - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd); - if (rc < 0) - dev_err(cd->dev, "%s: bus write fail on handshake (ret=%d)\n", - __func__, rc); - - return rc; -} - -static int cyttsp4_hw_soft_reset(struct cyttsp4 *cd) -{ - u8 cmd = CY_HST_RESET; - int rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd); - if (rc < 0) { - dev_err(cd->dev, "%s: FAILED to execute SOFT reset\n", - __func__); - return rc; - } - return 0; -} - -static int cyttsp4_hw_hard_reset(struct cyttsp4 *cd) -{ - if (cd->cpdata->xres) { - cd->cpdata->xres(cd->cpdata, cd->dev); - dev_dbg(cd->dev, "%s: execute HARD reset\n", __func__); - return 0; - } - dev_err(cd->dev, "%s: FAILED to execute HARD reset\n", __func__); - return -ENOSYS; -} - -static int cyttsp4_hw_reset(struct cyttsp4 *cd) -{ - int rc = cyttsp4_hw_hard_reset(cd); - if (rc == -ENOSYS) - rc = cyttsp4_hw_soft_reset(cd); - return rc; -} - -/* - * Gets number of bits for a touch filed as parameter, - * sets maximum value for field which is used as bit mask - * and returns number of bytes required for that field - */ -static int cyttsp4_bits_2_bytes(unsigned int nbits, size_t *max) -{ - *max = 1UL << nbits; - return (nbits + 7) / 8; -} - -static int cyttsp4_si_data_offsets(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(si->si_data), - &si->si_data); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read sysinfo data offsets r=%d\n", - __func__, rc); - return rc; - } - - /* Print sysinfo data offsets */ - cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)&si->si_data, - sizeof(si->si_data), "sysinfo_data_offsets"); - - /* convert sysinfo data offset bytes into integers */ - - si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh, - si->si_data.map_szl); - si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh, - si->si_data.map_szl); - si->si_ofs.cydata_ofs = merge_bytes(si->si_data.cydata_ofsh, - si->si_data.cydata_ofsl); - si->si_ofs.test_ofs = merge_bytes(si->si_data.test_ofsh, - si->si_data.test_ofsl); - si->si_ofs.pcfg_ofs = merge_bytes(si->si_data.pcfg_ofsh, - si->si_data.pcfg_ofsl); - si->si_ofs.opcfg_ofs = merge_bytes(si->si_data.opcfg_ofsh, - si->si_data.opcfg_ofsl); - si->si_ofs.ddata_ofs = merge_bytes(si->si_data.ddata_ofsh, - si->si_data.ddata_ofsl); - si->si_ofs.mdata_ofs = merge_bytes(si->si_data.mdata_ofsh, - si->si_data.mdata_ofsl); - return rc; -} - -static int cyttsp4_si_get_cydata(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int read_offset; - int mfgid_sz, calc_mfgid_sz; - void *p; - int rc; - - if (si->si_ofs.test_ofs <= si->si_ofs.cydata_ofs) { - dev_err(cd->dev, - "%s: invalid offset test_ofs: %zu, cydata_ofs: %zu\n", - __func__, si->si_ofs.test_ofs, si->si_ofs.cydata_ofs); - return -EINVAL; - } - - si->si_ofs.cydata_size = si->si_ofs.test_ofs - si->si_ofs.cydata_ofs; - dev_dbg(cd->dev, "%s: cydata size: %zd\n", __func__, - si->si_ofs.cydata_size); - - p = krealloc(si->si_ptrs.cydata, si->si_ofs.cydata_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate cydata memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.cydata = p; - - read_offset = si->si_ofs.cydata_ofs; - - /* Read the CYDA registers up to MFGID field */ - rc = cyttsp4_adap_read(cd, read_offset, - offsetof(struct cyttsp4_cydata, mfgid_sz) - + sizeof(si->si_ptrs.cydata->mfgid_sz), - si->si_ptrs.cydata); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read cydata r=%d\n", - __func__, rc); - return rc; - } - - /* Check MFGID size */ - mfgid_sz = si->si_ptrs.cydata->mfgid_sz; - calc_mfgid_sz = si->si_ofs.cydata_size - sizeof(struct cyttsp4_cydata); - if (mfgid_sz != calc_mfgid_sz) { - dev_err(cd->dev, "%s: mismatch in MFGID size, reported:%d calculated:%d\n", - __func__, mfgid_sz, calc_mfgid_sz); - return -EINVAL; - } - - read_offset += offsetof(struct cyttsp4_cydata, mfgid_sz) - + sizeof(si->si_ptrs.cydata->mfgid_sz); - - /* Read the CYDA registers for MFGID field */ - rc = cyttsp4_adap_read(cd, read_offset, si->si_ptrs.cydata->mfgid_sz, - si->si_ptrs.cydata->mfg_id); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read cydata r=%d\n", - __func__, rc); - return rc; - } - - read_offset += si->si_ptrs.cydata->mfgid_sz; - - /* Read the rest of the CYDA registers */ - rc = cyttsp4_adap_read(cd, read_offset, - sizeof(struct cyttsp4_cydata) - - offsetof(struct cyttsp4_cydata, cyito_idh), - &si->si_ptrs.cydata->cyito_idh); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read cydata r=%d\n", - __func__, rc); - return rc; - } - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.cydata, - si->si_ofs.cydata_size, "sysinfo_cydata"); - return rc; -} - -static int cyttsp4_si_get_test_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - if (si->si_ofs.pcfg_ofs <= si->si_ofs.test_ofs) { - dev_err(cd->dev, - "%s: invalid offset pcfg_ofs: %zu, test_ofs: %zu\n", - __func__, si->si_ofs.pcfg_ofs, si->si_ofs.test_ofs); - return -EINVAL; - } - - si->si_ofs.test_size = si->si_ofs.pcfg_ofs - si->si_ofs.test_ofs; - - p = krealloc(si->si_ptrs.test, si->si_ofs.test_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate test memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.test = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.test_ofs, si->si_ofs.test_size, - si->si_ptrs.test); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read test data r=%d\n", - __func__, rc); - return rc; - } - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.test, si->si_ofs.test_size, - "sysinfo_test_data"); - if (si->si_ptrs.test->post_codel & - CY_POST_CODEL_WDG_RST) - dev_info(cd->dev, "%s: %s codel=%02X\n", - __func__, "Reset was a WATCHDOG RESET", - si->si_ptrs.test->post_codel); - - if (!(si->si_ptrs.test->post_codel & - CY_POST_CODEL_CFG_DATA_CRC_FAIL)) - dev_info(cd->dev, "%s: %s codel=%02X\n", __func__, - "Config Data CRC FAIL", - si->si_ptrs.test->post_codel); - - if (!(si->si_ptrs.test->post_codel & - CY_POST_CODEL_PANEL_TEST_FAIL)) - dev_info(cd->dev, "%s: %s codel=%02X\n", - __func__, "PANEL TEST FAIL", - si->si_ptrs.test->post_codel); - - dev_info(cd->dev, "%s: SCANNING is %s codel=%02X\n", - __func__, si->si_ptrs.test->post_codel & 0x08 ? - "ENABLED" : "DISABLED", - si->si_ptrs.test->post_codel); - return rc; -} - -static int cyttsp4_si_get_pcfg_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - if (si->si_ofs.opcfg_ofs <= si->si_ofs.pcfg_ofs) { - dev_err(cd->dev, - "%s: invalid offset opcfg_ofs: %zu, pcfg_ofs: %zu\n", - __func__, si->si_ofs.opcfg_ofs, si->si_ofs.pcfg_ofs); - return -EINVAL; - } - - si->si_ofs.pcfg_size = si->si_ofs.opcfg_ofs - si->si_ofs.pcfg_ofs; - - p = krealloc(si->si_ptrs.pcfg, si->si_ofs.pcfg_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate pcfg memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.pcfg = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size, - si->si_ptrs.pcfg); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read pcfg data r=%d\n", - __func__, rc); - return rc; - } - - si->si_ofs.max_x = merge_bytes((si->si_ptrs.pcfg->res_xh - & CY_PCFG_RESOLUTION_X_MASK), si->si_ptrs.pcfg->res_xl); - si->si_ofs.x_origin = !!(si->si_ptrs.pcfg->res_xh - & CY_PCFG_ORIGIN_X_MASK); - si->si_ofs.max_y = merge_bytes((si->si_ptrs.pcfg->res_yh - & CY_PCFG_RESOLUTION_Y_MASK), si->si_ptrs.pcfg->res_yl); - si->si_ofs.y_origin = !!(si->si_ptrs.pcfg->res_yh - & CY_PCFG_ORIGIN_Y_MASK); - si->si_ofs.max_p = merge_bytes(si->si_ptrs.pcfg->max_zh, - si->si_ptrs.pcfg->max_zl); - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.pcfg, - si->si_ofs.pcfg_size, "sysinfo_pcfg_data"); - return rc; -} - -static int cyttsp4_si_get_opcfg_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - struct cyttsp4_tch_abs_params *tch; - struct cyttsp4_tch_rec_params *tch_old, *tch_new; - enum cyttsp4_tch_abs abs; - int i; - void *p; - int rc; - - if (si->si_ofs.ddata_ofs <= si->si_ofs.opcfg_ofs) { - dev_err(cd->dev, - "%s: invalid offset ddata_ofs: %zu, opcfg_ofs: %zu\n", - __func__, si->si_ofs.ddata_ofs, si->si_ofs.opcfg_ofs); - return -EINVAL; - } - - si->si_ofs.opcfg_size = si->si_ofs.ddata_ofs - si->si_ofs.opcfg_ofs; - - p = krealloc(si->si_ptrs.opcfg, si->si_ofs.opcfg_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate opcfg memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.opcfg = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size, - si->si_ptrs.opcfg); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read opcfg data r=%d\n", - __func__, rc); - return rc; - } - si->si_ofs.cmd_ofs = si->si_ptrs.opcfg->cmd_ofs; - si->si_ofs.rep_ofs = si->si_ptrs.opcfg->rep_ofs; - si->si_ofs.rep_sz = (si->si_ptrs.opcfg->rep_szh * 256) + - si->si_ptrs.opcfg->rep_szl; - si->si_ofs.num_btns = si->si_ptrs.opcfg->num_btns; - si->si_ofs.num_btn_regs = (si->si_ofs.num_btns + - CY_NUM_BTN_PER_REG - 1) / CY_NUM_BTN_PER_REG; - si->si_ofs.tt_stat_ofs = si->si_ptrs.opcfg->tt_stat_ofs; - si->si_ofs.obj_cfg0 = si->si_ptrs.opcfg->obj_cfg0; - si->si_ofs.max_tchs = si->si_ptrs.opcfg->max_tchs & - CY_BYTE_OFS_MASK; - si->si_ofs.tch_rec_size = si->si_ptrs.opcfg->tch_rec_size & - CY_BYTE_OFS_MASK; - - /* Get the old touch fields */ - for (abs = CY_TCH_X; abs < CY_NUM_TCH_FIELDS; abs++) { - tch = &si->si_ofs.tch_abs[abs]; - tch_old = &si->si_ptrs.opcfg->tch_rec_old[abs]; - - tch->ofs = tch_old->loc & CY_BYTE_OFS_MASK; - tch->size = cyttsp4_bits_2_bytes(tch_old->size, - &tch->max); - tch->bofs = (tch_old->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT; - } - - /* button fields */ - si->si_ofs.btn_rec_size = si->si_ptrs.opcfg->btn_rec_size; - si->si_ofs.btn_diff_ofs = si->si_ptrs.opcfg->btn_diff_ofs; - si->si_ofs.btn_diff_size = si->si_ptrs.opcfg->btn_diff_size; - - if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) { - /* Get the extended touch fields */ - for (i = 0; i < CY_NUM_EXT_TCH_FIELDS; abs++, i++) { - tch = &si->si_ofs.tch_abs[abs]; - tch_new = &si->si_ptrs.opcfg->tch_rec_new[i]; - - tch->ofs = tch_new->loc & CY_BYTE_OFS_MASK; - tch->size = cyttsp4_bits_2_bytes(tch_new->size, - &tch->max); - tch->bofs = (tch_new->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT; - } - } - - for (abs = 0; abs < CY_TCH_NUM_ABS; abs++) { - dev_dbg(cd->dev, "%s: tch_rec_%s\n", __func__, - cyttsp4_tch_abs_string[abs]); - dev_dbg(cd->dev, "%s: ofs =%2zd\n", __func__, - si->si_ofs.tch_abs[abs].ofs); - dev_dbg(cd->dev, "%s: siz =%2zd\n", __func__, - si->si_ofs.tch_abs[abs].size); - dev_dbg(cd->dev, "%s: max =%2zd\n", __func__, - si->si_ofs.tch_abs[abs].max); - dev_dbg(cd->dev, "%s: bofs=%2zd\n", __func__, - si->si_ofs.tch_abs[abs].bofs); - } - - si->si_ofs.mode_size = si->si_ofs.tt_stat_ofs + 1; - si->si_ofs.data_size = si->si_ofs.max_tchs * - si->si_ptrs.opcfg->tch_rec_size; - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.opcfg, - si->si_ofs.opcfg_size, "sysinfo_opcfg_data"); - - return 0; -} - -static int cyttsp4_si_get_ddata(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - si->si_ofs.ddata_size = si->si_ofs.mdata_ofs - si->si_ofs.ddata_ofs; - - p = krealloc(si->si_ptrs.ddata, si->si_ofs.ddata_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: fail alloc ddata memory\n", __func__); - return -ENOMEM; - } - si->si_ptrs.ddata = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.ddata_ofs, si->si_ofs.ddata_size, - si->si_ptrs.ddata); - if (rc < 0) - dev_err(cd->dev, "%s: fail read ddata data r=%d\n", - __func__, rc); - else - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.ddata, - si->si_ofs.ddata_size, "sysinfo_ddata"); - return rc; -} - -static int cyttsp4_si_get_mdata(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - si->si_ofs.mdata_size = si->si_ofs.map_sz - si->si_ofs.mdata_ofs; - - p = krealloc(si->si_ptrs.mdata, si->si_ofs.mdata_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: fail alloc mdata memory\n", __func__); - return -ENOMEM; - } - si->si_ptrs.mdata = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.mdata_ofs, si->si_ofs.mdata_size, - si->si_ptrs.mdata); - if (rc < 0) - dev_err(cd->dev, "%s: fail read mdata data r=%d\n", - __func__, rc); - else - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.mdata, - si->si_ofs.mdata_size, "sysinfo_mdata"); - return rc; -} - -static int cyttsp4_si_get_btn_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int btn; - int num_defined_keys; - u16 *key_table; - void *p; - int rc = 0; - - if (si->si_ofs.num_btns) { - si->si_ofs.btn_keys_size = si->si_ofs.num_btns * - sizeof(struct cyttsp4_btn); - - p = krealloc(si->btn, si->si_ofs.btn_keys_size, - GFP_KERNEL|__GFP_ZERO); - if (p == NULL) { - dev_err(cd->dev, "%s: %s\n", __func__, - "fail alloc btn_keys memory"); - return -ENOMEM; - } - si->btn = p; - - if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS] == NULL) - num_defined_keys = 0; - else if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS]->data == NULL) - num_defined_keys = 0; - else - num_defined_keys = cd->cpdata->sett - [CY_IC_GRPNUM_BTN_KEYS]->size; - - for (btn = 0; btn < si->si_ofs.num_btns && - btn < num_defined_keys; btn++) { - key_table = (u16 *)cd->cpdata->sett - [CY_IC_GRPNUM_BTN_KEYS]->data; - si->btn[btn].key_code = key_table[btn]; - si->btn[btn].state = CY_BTN_RELEASED; - si->btn[btn].enabled = true; - } - for (; btn < si->si_ofs.num_btns; btn++) { - si->btn[btn].key_code = KEY_RESERVED; - si->btn[btn].state = CY_BTN_RELEASED; - si->btn[btn].enabled = true; - } - - return rc; - } - - si->si_ofs.btn_keys_size = 0; - kfree(si->btn); - si->btn = NULL; - return rc; -} - -static int cyttsp4_si_get_op_data_ptrs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - - p = krealloc(si->xy_mode, si->si_ofs.mode_size, GFP_KERNEL|__GFP_ZERO); - if (p == NULL) - return -ENOMEM; - si->xy_mode = p; - - p = krealloc(si->xy_data, si->si_ofs.data_size, GFP_KERNEL|__GFP_ZERO); - if (p == NULL) - return -ENOMEM; - si->xy_data = p; - - p = krealloc(si->btn_rec_data, - si->si_ofs.btn_rec_size * si->si_ofs.num_btns, - GFP_KERNEL|__GFP_ZERO); - if (p == NULL) - return -ENOMEM; - si->btn_rec_data = p; - - return 0; -} - -static void cyttsp4_si_put_log_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - dev_dbg(cd->dev, "%s: cydata_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.cydata_ofs, si->si_ofs.cydata_size); - dev_dbg(cd->dev, "%s: test_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.test_ofs, si->si_ofs.test_size); - dev_dbg(cd->dev, "%s: pcfg_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size); - dev_dbg(cd->dev, "%s: opcfg_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size); - dev_dbg(cd->dev, "%s: ddata_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.ddata_ofs, si->si_ofs.ddata_size); - dev_dbg(cd->dev, "%s: mdata_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.mdata_ofs, si->si_ofs.mdata_size); - - dev_dbg(cd->dev, "%s: cmd_ofs =%4zd\n", __func__, - si->si_ofs.cmd_ofs); - dev_dbg(cd->dev, "%s: rep_ofs =%4zd\n", __func__, - si->si_ofs.rep_ofs); - dev_dbg(cd->dev, "%s: rep_sz =%4zd\n", __func__, - si->si_ofs.rep_sz); - dev_dbg(cd->dev, "%s: num_btns =%4zd\n", __func__, - si->si_ofs.num_btns); - dev_dbg(cd->dev, "%s: num_btn_regs =%4zd\n", __func__, - si->si_ofs.num_btn_regs); - dev_dbg(cd->dev, "%s: tt_stat_ofs =%4zd\n", __func__, - si->si_ofs.tt_stat_ofs); - dev_dbg(cd->dev, "%s: tch_rec_size =%4zd\n", __func__, - si->si_ofs.tch_rec_size); - dev_dbg(cd->dev, "%s: max_tchs =%4zd\n", __func__, - si->si_ofs.max_tchs); - dev_dbg(cd->dev, "%s: mode_size =%4zd\n", __func__, - si->si_ofs.mode_size); - dev_dbg(cd->dev, "%s: data_size =%4zd\n", __func__, - si->si_ofs.data_size); - dev_dbg(cd->dev, "%s: map_sz =%4zd\n", __func__, - si->si_ofs.map_sz); - - dev_dbg(cd->dev, "%s: btn_rec_size =%2zd\n", __func__, - si->si_ofs.btn_rec_size); - dev_dbg(cd->dev, "%s: btn_diff_ofs =%2zd\n", __func__, - si->si_ofs.btn_diff_ofs); - dev_dbg(cd->dev, "%s: btn_diff_size =%2zd\n", __func__, - si->si_ofs.btn_diff_size); - - dev_dbg(cd->dev, "%s: max_x = 0x%04zX (%zd)\n", __func__, - si->si_ofs.max_x, si->si_ofs.max_x); - dev_dbg(cd->dev, "%s: x_origin = %zd (%s)\n", __func__, - si->si_ofs.x_origin, - si->si_ofs.x_origin == CY_NORMAL_ORIGIN ? - "left corner" : "right corner"); - dev_dbg(cd->dev, "%s: max_y = 0x%04zX (%zd)\n", __func__, - si->si_ofs.max_y, si->si_ofs.max_y); - dev_dbg(cd->dev, "%s: y_origin = %zd (%s)\n", __func__, - si->si_ofs.y_origin, - si->si_ofs.y_origin == CY_NORMAL_ORIGIN ? - "upper corner" : "lower corner"); - dev_dbg(cd->dev, "%s: max_p = 0x%04zX (%zd)\n", __func__, - si->si_ofs.max_p, si->si_ofs.max_p); - - dev_dbg(cd->dev, "%s: xy_mode=%p xy_data=%p\n", __func__, - si->xy_mode, si->xy_data); -} - -static int cyttsp4_get_sysinfo_regs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int rc; - - rc = cyttsp4_si_data_offsets(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_cydata(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_test_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_pcfg_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_opcfg_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_ddata(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_mdata(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_btn_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_op_data_ptrs(cd); - if (rc < 0) { - dev_err(cd->dev, "%s: failed to get_op_data\n", - __func__); - return rc; - } - - cyttsp4_si_put_log_data(cd); - - /* provide flow control handshake */ - rc = cyttsp4_handshake(cd, si->si_data.hst_mode); - if (rc < 0) - dev_err(cd->dev, "%s: handshake fail on sysinfo reg\n", - __func__); - - si->ready = true; - return rc; -} - -static void cyttsp4_queue_startup_(struct cyttsp4 *cd) -{ - if (cd->startup_state == STARTUP_NONE) { - cd->startup_state = STARTUP_QUEUED; - schedule_work(&cd->startup_work); - dev_dbg(cd->dev, "%s: cyttsp4_startup queued\n", __func__); - } else { - dev_dbg(cd->dev, "%s: startup_state = %d\n", __func__, - cd->startup_state); - } -} - -static void cyttsp4_report_slot_liftoff(struct cyttsp4_mt_data *md, - int max_slots) -{ - int t; - - if (md->num_prv_tch == 0) - return; - - for (t = 0; t < max_slots; t++) { - input_mt_slot(md->input, t); - input_mt_report_slot_inactive(md->input); - } -} - -static void cyttsp4_lift_all(struct cyttsp4_mt_data *md) -{ - if (!md->si) - return; - - if (md->num_prv_tch != 0) { - cyttsp4_report_slot_liftoff(md, - md->si->si_ofs.tch_abs[CY_TCH_T].max); - input_sync(md->input); - md->num_prv_tch = 0; - } -} - -static void cyttsp4_get_touch_axis(struct cyttsp4_mt_data *md, - int *axis, int size, int max, u8 *xy_data, int bofs) -{ - int nbyte; - int next; - - for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++) { - dev_vdbg(&md->input->dev, - "%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p" - " xy_data[%d]=%02X(%d) bofs=%d\n", - __func__, *axis, *axis, size, max, xy_data, next, - xy_data[next], xy_data[next], bofs); - *axis = (*axis * 256) + (xy_data[next] >> bofs); - next++; - } - - *axis &= max - 1; - - dev_vdbg(&md->input->dev, - "%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p" - " xy_data[%d]=%02X(%d)\n", - __func__, *axis, *axis, size, max, xy_data, next, - xy_data[next], xy_data[next]); -} - -static void cyttsp4_get_touch(struct cyttsp4_mt_data *md, - struct cyttsp4_touch *touch, u8 *xy_data) -{ - struct device *dev = &md->input->dev; - struct cyttsp4_sysinfo *si = md->si; - enum cyttsp4_tch_abs abs; - bool flipped; - - for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) { - cyttsp4_get_touch_axis(md, &touch->abs[abs], - si->si_ofs.tch_abs[abs].size, - si->si_ofs.tch_abs[abs].max, - xy_data + si->si_ofs.tch_abs[abs].ofs, - si->si_ofs.tch_abs[abs].bofs); - dev_vdbg(dev, "%s: get %s=%04X(%d)\n", __func__, - cyttsp4_tch_abs_string[abs], - touch->abs[abs], touch->abs[abs]); - } - - if (md->pdata->flags & CY_FLAG_FLIP) { - swap(touch->abs[CY_TCH_X], touch->abs[CY_TCH_Y]); - flipped = true; - } else - flipped = false; - - if (md->pdata->flags & CY_FLAG_INV_X) { - if (flipped) - touch->abs[CY_TCH_X] = md->si->si_ofs.max_y - - touch->abs[CY_TCH_X]; - else - touch->abs[CY_TCH_X] = md->si->si_ofs.max_x - - touch->abs[CY_TCH_X]; - } - if (md->pdata->flags & CY_FLAG_INV_Y) { - if (flipped) - touch->abs[CY_TCH_Y] = md->si->si_ofs.max_x - - touch->abs[CY_TCH_Y]; - else - touch->abs[CY_TCH_Y] = md->si->si_ofs.max_y - - touch->abs[CY_TCH_Y]; - } - - dev_vdbg(dev, "%s: flip=%s inv-x=%s inv-y=%s x=%04X(%d) y=%04X(%d)\n", - __func__, flipped ? "true" : "false", - md->pdata->flags & CY_FLAG_INV_X ? "true" : "false", - md->pdata->flags & CY_FLAG_INV_Y ? "true" : "false", - touch->abs[CY_TCH_X], touch->abs[CY_TCH_X], - touch->abs[CY_TCH_Y], touch->abs[CY_TCH_Y]); -} - -static void cyttsp4_final_sync(struct input_dev *input, int max_slots, int *ids) -{ - int t; - - for (t = 0; t < max_slots; t++) { - if (ids[t]) - continue; - input_mt_slot(input, t); - input_mt_report_slot_inactive(input); - } - - input_sync(input); -} - -static void cyttsp4_get_mt_touches(struct cyttsp4_mt_data *md, int num_cur_tch) -{ - struct device *dev = &md->input->dev; - struct cyttsp4_sysinfo *si = md->si; - struct cyttsp4_touch tch; - int sig; - int i, j, t = 0; - int ids[MAX(CY_TMA1036_MAX_TCH, CY_TMA4XX_MAX_TCH)]; - - memset(ids, 0, si->si_ofs.tch_abs[CY_TCH_T].max * sizeof(int)); - for (i = 0; i < num_cur_tch; i++) { - cyttsp4_get_touch(md, &tch, si->xy_data + - (i * si->si_ofs.tch_rec_size)); - if ((tch.abs[CY_TCH_T] < md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST]) || - (tch.abs[CY_TCH_T] > md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MAX_OST])) { - dev_err(dev, "%s: tch=%d -> bad trk_id=%d max_id=%d\n", - __func__, i, tch.abs[CY_TCH_T], - md->pdata->frmwrk->abs[(CY_ABS_ID_OST * - CY_NUM_ABS_SET) + CY_MAX_OST]); - continue; - } - - /* use 0 based track id's */ - sig = md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + 0]; - if (sig != CY_IGNORE_VALUE) { - t = tch.abs[CY_TCH_T] - md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST]; - if (tch.abs[CY_TCH_E] == CY_EV_LIFTOFF) { - dev_dbg(dev, "%s: t=%d e=%d lift-off\n", - __func__, t, tch.abs[CY_TCH_E]); - goto cyttsp4_get_mt_touches_pr_tch; - } - input_mt_slot(md->input, t); - input_mt_report_slot_state(md->input, MT_TOOL_FINGER, - true); - ids[t] = true; - } - - /* all devices: position and pressure fields */ - for (j = 0; j <= CY_ABS_W_OST; j++) { - sig = md->pdata->frmwrk->abs[((CY_ABS_X_OST + j) * - CY_NUM_ABS_SET) + 0]; - if (sig != CY_IGNORE_VALUE) - input_report_abs(md->input, sig, - tch.abs[CY_TCH_X + j]); - } - if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) { - /* - * TMA400 size and orientation fields: - * if pressure is non-zero and major touch - * signal is zero, then set major and minor touch - * signals to minimum non-zero value - */ - if (tch.abs[CY_TCH_P] > 0 && tch.abs[CY_TCH_MAJ] == 0) - tch.abs[CY_TCH_MAJ] = tch.abs[CY_TCH_MIN] = 1; - - /* Get the extended touch fields */ - for (j = 0; j < CY_NUM_EXT_TCH_FIELDS; j++) { - sig = md->pdata->frmwrk->abs - [((CY_ABS_MAJ_OST + j) * - CY_NUM_ABS_SET) + 0]; - if (sig != CY_IGNORE_VALUE) - input_report_abs(md->input, sig, - tch.abs[CY_TCH_MAJ + j]); - } - } - -cyttsp4_get_mt_touches_pr_tch: - if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) - dev_dbg(dev, - "%s: t=%d x=%d y=%d z=%d M=%d m=%d o=%d e=%d\n", - __func__, t, - tch.abs[CY_TCH_X], - tch.abs[CY_TCH_Y], - tch.abs[CY_TCH_P], - tch.abs[CY_TCH_MAJ], - tch.abs[CY_TCH_MIN], - tch.abs[CY_TCH_OR], - tch.abs[CY_TCH_E]); - else - dev_dbg(dev, - "%s: t=%d x=%d y=%d z=%d e=%d\n", __func__, - t, - tch.abs[CY_TCH_X], - tch.abs[CY_TCH_Y], - tch.abs[CY_TCH_P], - tch.abs[CY_TCH_E]); - } - - cyttsp4_final_sync(md->input, si->si_ofs.tch_abs[CY_TCH_T].max, ids); - - md->num_prv_tch = num_cur_tch; - - return; -} - -/* read xy_data for all current touches */ -static int cyttsp4_xy_worker(struct cyttsp4 *cd) -{ - struct cyttsp4_mt_data *md = &cd->md; - struct device *dev = &md->input->dev; - struct cyttsp4_sysinfo *si = md->si; - u8 num_cur_tch; - u8 hst_mode; - u8 rep_len; - u8 rep_stat; - u8 tt_stat; - int rc = 0; - - /* - * Get event data from cyttsp4 device. - * The event data includes all data - * for all active touches. - * Event data also includes button data - */ - /* - * Use 2 reads: - * 1st read to get mode + button bytes + touch count (core) - * 2nd read (optional) to get touch 1 - touch n data - */ - hst_mode = si->xy_mode[CY_REG_BASE]; - rep_len = si->xy_mode[si->si_ofs.rep_ofs]; - rep_stat = si->xy_mode[si->si_ofs.rep_ofs + 1]; - tt_stat = si->xy_mode[si->si_ofs.tt_stat_ofs]; - dev_vdbg(dev, "%s: %s%02X %s%d %s%02X %s%02X\n", __func__, - "hst_mode=", hst_mode, "rep_len=", rep_len, - "rep_stat=", rep_stat, "tt_stat=", tt_stat); - - num_cur_tch = GET_NUM_TOUCHES(tt_stat); - dev_vdbg(dev, "%s: num_cur_tch=%d\n", __func__, num_cur_tch); - - if (rep_len == 0 && num_cur_tch > 0) { - dev_err(dev, "%s: report length error rep_len=%d num_tch=%d\n", - __func__, rep_len, num_cur_tch); - goto cyttsp4_xy_worker_exit; - } - - /* read touches */ - if (num_cur_tch > 0) { - rc = cyttsp4_adap_read(cd, si->si_ofs.tt_stat_ofs + 1, - num_cur_tch * si->si_ofs.tch_rec_size, - si->xy_data); - if (rc < 0) { - dev_err(dev, "%s: read fail on touch regs r=%d\n", - __func__, rc); - goto cyttsp4_xy_worker_exit; - } - } - - /* print xy data */ - cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_data, num_cur_tch * - si->si_ofs.tch_rec_size, "xy_data"); - - /* check any error conditions */ - if (IS_BAD_PKT(rep_stat)) { - dev_dbg(dev, "%s: Invalid buffer detected\n", __func__); - rc = 0; - goto cyttsp4_xy_worker_exit; - } - - if (IS_LARGE_AREA(tt_stat)) - dev_dbg(dev, "%s: Large area detected\n", __func__); - - if (num_cur_tch > si->si_ofs.max_tchs) { - dev_err(dev, "%s: too many tch; set to max tch (n=%d c=%zd)\n", - __func__, num_cur_tch, si->si_ofs.max_tchs); - num_cur_tch = si->si_ofs.max_tchs; - } - - /* extract xy_data for all currently reported touches */ - dev_vdbg(dev, "%s: extract data num_cur_tch=%d\n", __func__, - num_cur_tch); - if (num_cur_tch) - cyttsp4_get_mt_touches(md, num_cur_tch); - else - cyttsp4_lift_all(md); - - rc = 0; - -cyttsp4_xy_worker_exit: - return rc; -} - -static int cyttsp4_mt_attention(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - struct cyttsp4_mt_data *md = &cd->md; - int rc = 0; - - if (!md->si) - return 0; - - mutex_lock(&md->report_lock); - if (!md->is_suspended) { - /* core handles handshake */ - rc = cyttsp4_xy_worker(cd); - } else { - dev_vdbg(dev, "%s: Ignoring report while suspended\n", - __func__); - } - mutex_unlock(&md->report_lock); - if (rc < 0) - dev_err(dev, "%s: xy_worker error r=%d\n", __func__, rc); - - return rc; -} - -static irqreturn_t cyttsp4_irq(int irq, void *handle) -{ - struct cyttsp4 *cd = handle; - struct device *dev = cd->dev; - enum cyttsp4_mode cur_mode; - u8 cmd_ofs = cd->sysinfo.si_ofs.cmd_ofs; - u8 mode[3]; - int rc; - - /* - * Check whether this IRQ should be ignored (external) - * This should be the very first thing to check since - * ignore_irq may be set for a very short period of time - */ - if (atomic_read(&cd->ignore_irq)) { - dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__); - return IRQ_HANDLED; - } - - dev_dbg(dev, "%s int:0x%x\n", __func__, cd->int_status); - - mutex_lock(&cd->system_lock); - - /* Just to debug */ - if (cd->sleep_state == SS_SLEEP_ON || cd->sleep_state == SS_SLEEPING) - dev_vdbg(dev, "%s: Received IRQ while in sleep\n", __func__); - - rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), mode); - if (rc) { - dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc); - goto cyttsp4_irq_exit; - } - dev_vdbg(dev, "%s mode[0-2]:0x%X 0x%X 0x%X\n", __func__, - mode[0], mode[1], mode[2]); - - if (IS_BOOTLOADER(mode[0], mode[1])) { - cur_mode = CY_MODE_BOOTLOADER; - dev_vdbg(dev, "%s: bl running\n", __func__); - if (cd->mode == CY_MODE_BOOTLOADER) { - /* Signal bootloader heartbeat heard */ - wake_up(&cd->wait_q); - goto cyttsp4_irq_exit; - } - - /* switch to bootloader */ - dev_dbg(dev, "%s: restart switch to bl m=%d -> m=%d\n", - __func__, cd->mode, cur_mode); - - /* catch operation->bl glitch */ - if (cd->mode != CY_MODE_UNKNOWN) { - /* Incase startup_state do not let startup_() */ - cd->mode = CY_MODE_UNKNOWN; - cyttsp4_queue_startup_(cd); - goto cyttsp4_irq_exit; - } - - /* - * do not wake thread on this switch since - * it is possible to get an early heartbeat - * prior to performing the reset - */ - cd->mode = cur_mode; - - goto cyttsp4_irq_exit; - } - - switch (mode[0] & CY_HST_MODE) { - case CY_HST_OPERATE: - cur_mode = CY_MODE_OPERATIONAL; - dev_vdbg(dev, "%s: operational\n", __func__); - break; - case CY_HST_CAT: - cur_mode = CY_MODE_CAT; - dev_vdbg(dev, "%s: CaT\n", __func__); - break; - case CY_HST_SYSINFO: - cur_mode = CY_MODE_SYSINFO; - dev_vdbg(dev, "%s: sysinfo\n", __func__); - break; - default: - cur_mode = CY_MODE_UNKNOWN; - dev_err(dev, "%s: unknown HST mode 0x%02X\n", __func__, - mode[0]); - break; - } - - /* Check whether this IRQ should be ignored (internal) */ - if (cd->int_status & CY_INT_IGNORE) { - dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__); - goto cyttsp4_irq_exit; - } - - /* Check for wake up interrupt */ - if (cd->int_status & CY_INT_AWAKE) { - cd->int_status &= ~CY_INT_AWAKE; - wake_up(&cd->wait_q); - dev_vdbg(dev, "%s: Received wake up interrupt\n", __func__); - goto cyttsp4_irq_handshake; - } - - /* Expecting mode change interrupt */ - if ((cd->int_status & CY_INT_MODE_CHANGE) - && (mode[0] & CY_HST_MODE_CHANGE) == 0) { - cd->int_status &= ~CY_INT_MODE_CHANGE; - dev_dbg(dev, "%s: finish mode switch m=%d -> m=%d\n", - __func__, cd->mode, cur_mode); - cd->mode = cur_mode; - wake_up(&cd->wait_q); - goto cyttsp4_irq_handshake; - } - - /* compare current core mode to current device mode */ - dev_vdbg(dev, "%s: cd->mode=%d cur_mode=%d\n", - __func__, cd->mode, cur_mode); - if ((mode[0] & CY_HST_MODE_CHANGE) == 0 && cd->mode != cur_mode) { - /* Unexpected mode change occurred */ - dev_err(dev, "%s %d->%d 0x%x\n", __func__, cd->mode, - cur_mode, cd->int_status); - dev_dbg(dev, "%s: Unexpected mode change, startup\n", - __func__); - cyttsp4_queue_startup_(cd); - goto cyttsp4_irq_exit; - } - - /* Expecting command complete interrupt */ - dev_vdbg(dev, "%s: command byte:0x%x\n", __func__, mode[cmd_ofs]); - if ((cd->int_status & CY_INT_EXEC_CMD) - && mode[cmd_ofs] & CY_CMD_COMPLETE) { - cd->int_status &= ~CY_INT_EXEC_CMD; - dev_vdbg(dev, "%s: Received command complete interrupt\n", - __func__); - wake_up(&cd->wait_q); - /* - * It is possible to receive a single interrupt for - * command complete and touch/button status report. - * Continue processing for a possible status report. - */ - } - - /* This should be status report, read status regs */ - if (cd->mode == CY_MODE_OPERATIONAL) { - dev_vdbg(dev, "%s: Read status registers\n", __func__); - rc = cyttsp4_load_status_regs(cd); - if (rc < 0) - dev_err(dev, "%s: fail read mode regs r=%d\n", - __func__, rc); - } - - cyttsp4_mt_attention(cd); - -cyttsp4_irq_handshake: - /* handshake the event */ - dev_vdbg(dev, "%s: Handshake mode=0x%02X r=%d\n", - __func__, mode[0], rc); - rc = cyttsp4_handshake(cd, mode[0]); - if (rc < 0) - dev_err(dev, "%s: Fail handshake mode=0x%02X r=%d\n", - __func__, mode[0], rc); - - /* - * a non-zero udelay period is required for using - * IRQF_TRIGGER_LOW in order to delay until the - * device completes isr deassert - */ - udelay(cd->cpdata->level_irq_udelay); - -cyttsp4_irq_exit: - mutex_unlock(&cd->system_lock); - return IRQ_HANDLED; -} - -static void cyttsp4_start_wd_timer(struct cyttsp4 *cd) -{ - if (!CY_WATCHDOG_TIMEOUT) - return; - - mod_timer(&cd->watchdog_timer, jiffies + - msecs_to_jiffies(CY_WATCHDOG_TIMEOUT)); -} - -static void cyttsp4_stop_wd_timer(struct cyttsp4 *cd) -{ - if (!CY_WATCHDOG_TIMEOUT) - return; - - /* - * Ensure we wait until the watchdog timer - * running on a different CPU finishes - */ - timer_shutdown_sync(&cd->watchdog_timer); - cancel_work_sync(&cd->watchdog_work); -} - -static void cyttsp4_watchdog_timer(struct timer_list *t) -{ - struct cyttsp4 *cd = from_timer(cd, t, watchdog_timer); - - dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__); - - schedule_work(&cd->watchdog_work); - - return; -} - -static int cyttsp4_request_exclusive(struct cyttsp4 *cd, void *ownptr, - int timeout_ms) -{ - int t = msecs_to_jiffies(timeout_ms); - bool with_timeout = (timeout_ms != 0); - - mutex_lock(&cd->system_lock); - if (!cd->exclusive_dev && cd->exclusive_waits == 0) { - cd->exclusive_dev = ownptr; - goto exit; - } - - cd->exclusive_waits++; -wait: - mutex_unlock(&cd->system_lock); - if (with_timeout) { - t = wait_event_timeout(cd->wait_q, !cd->exclusive_dev, t); - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: tmo waiting exclusive access\n", - __func__); - mutex_lock(&cd->system_lock); - cd->exclusive_waits--; - mutex_unlock(&cd->system_lock); - return -ETIME; - } - } else { - wait_event(cd->wait_q, !cd->exclusive_dev); - } - mutex_lock(&cd->system_lock); - if (cd->exclusive_dev) - goto wait; - cd->exclusive_dev = ownptr; - cd->exclusive_waits--; -exit: - mutex_unlock(&cd->system_lock); - - return 0; -} - -/* - * returns error if was not owned - */ -static int cyttsp4_release_exclusive(struct cyttsp4 *cd, void *ownptr) -{ - mutex_lock(&cd->system_lock); - if (cd->exclusive_dev != ownptr) { - mutex_unlock(&cd->system_lock); - return -EINVAL; - } - - dev_vdbg(cd->dev, "%s: exclusive_dev %p freed\n", - __func__, cd->exclusive_dev); - cd->exclusive_dev = NULL; - wake_up(&cd->wait_q); - mutex_unlock(&cd->system_lock); - return 0; -} - -static int cyttsp4_wait_bl_heartbeat(struct cyttsp4 *cd) -{ - long t; - int rc = 0; - - /* wait heartbeat */ - dev_vdbg(cd->dev, "%s: wait heartbeat...\n", __func__); - t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_BOOTLOADER, - msecs_to_jiffies(CY_CORE_RESET_AND_WAIT_TIMEOUT)); - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: tmo waiting bl heartbeat cd->mode=%d\n", - __func__, cd->mode); - rc = -ETIME; - } - - return rc; -} - -static int cyttsp4_wait_sysinfo_mode(struct cyttsp4 *cd) -{ - long t; - - dev_vdbg(cd->dev, "%s: wait sysinfo...\n", __func__); - - t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_SYSINFO, - msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT)); - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: tmo waiting exit bl cd->mode=%d\n", - __func__, cd->mode); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_MODE_CHANGE; - mutex_unlock(&cd->system_lock); - return -ETIME; - } - - return 0; -} - -static int cyttsp4_reset_and_wait(struct cyttsp4 *cd) -{ - int rc; - - /* reset hardware */ - mutex_lock(&cd->system_lock); - dev_dbg(cd->dev, "%s: reset hw...\n", __func__); - rc = cyttsp4_hw_reset(cd); - cd->mode = CY_MODE_UNKNOWN; - mutex_unlock(&cd->system_lock); - if (rc < 0) { - dev_err(cd->dev, "%s:Fail hw reset r=%d\n", __func__, rc); - return rc; - } - - return cyttsp4_wait_bl_heartbeat(cd); -} - -/* - * returns err if refused or timeout; block until mode change complete - * bit is set (mode change interrupt) - */ -static int cyttsp4_set_mode(struct cyttsp4 *cd, int new_mode) -{ - u8 new_dev_mode; - u8 mode; - long t; - int rc; - - switch (new_mode) { - case CY_MODE_OPERATIONAL: - new_dev_mode = CY_HST_OPERATE; - break; - case CY_MODE_SYSINFO: - new_dev_mode = CY_HST_SYSINFO; - break; - case CY_MODE_CAT: - new_dev_mode = CY_HST_CAT; - break; - default: - dev_err(cd->dev, "%s: invalid mode: %02X(%d)\n", - __func__, new_mode, new_mode); - return -EINVAL; - } - - /* change mode */ - dev_dbg(cd->dev, "%s: %s=%p new_dev_mode=%02X new_mode=%d\n", - __func__, "have exclusive", cd->exclusive_dev, - new_dev_mode, new_mode); - - mutex_lock(&cd->system_lock); - rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); - if (rc < 0) { - mutex_unlock(&cd->system_lock); - dev_err(cd->dev, "%s: Fail read mode r=%d\n", - __func__, rc); - goto exit; - } - - /* Clear device mode bits and set to new mode */ - mode &= ~CY_HST_MODE; - mode |= new_dev_mode | CY_HST_MODE_CHANGE; - - cd->int_status |= CY_INT_MODE_CHANGE; - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode), &mode); - mutex_unlock(&cd->system_lock); - if (rc < 0) { - dev_err(cd->dev, "%s: Fail write mode change r=%d\n", - __func__, rc); - goto exit; - } - - /* wait for mode change done interrupt */ - t = wait_event_timeout(cd->wait_q, - (cd->int_status & CY_INT_MODE_CHANGE) == 0, - msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT)); - dev_dbg(cd->dev, "%s: back from wait t=%ld cd->mode=%d\n", - __func__, t, cd->mode); - - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: %s\n", __func__, - "tmo waiting mode change"); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_MODE_CHANGE; - mutex_unlock(&cd->system_lock); - rc = -EINVAL; - } - -exit: - return rc; -} - -static void cyttsp4_watchdog_work(struct work_struct *work) -{ - struct cyttsp4 *cd = - container_of(work, struct cyttsp4, watchdog_work); - u8 *mode; - int retval; - - mutex_lock(&cd->system_lock); - retval = cyttsp4_load_status_regs(cd); - if (retval < 0) { - dev_err(cd->dev, - "%s: failed to access device in watchdog timer r=%d\n", - __func__, retval); - cyttsp4_queue_startup_(cd); - goto cyttsp4_timer_watchdog_exit_error; - } - mode = &cd->sysinfo.xy_mode[CY_REG_BASE]; - if (IS_BOOTLOADER(mode[0], mode[1])) { - dev_err(cd->dev, - "%s: device found in bootloader mode when operational mode\n", - __func__); - cyttsp4_queue_startup_(cd); - goto cyttsp4_timer_watchdog_exit_error; - } - - cyttsp4_start_wd_timer(cd); -cyttsp4_timer_watchdog_exit_error: - mutex_unlock(&cd->system_lock); - return; -} - -static int cyttsp4_core_sleep_(struct cyttsp4 *cd) -{ - enum cyttsp4_sleep_state ss = SS_SLEEP_ON; - enum cyttsp4_int_state int_status = CY_INT_IGNORE; - int rc = 0; - u8 mode[2]; - - /* Already in sleep mode? */ - mutex_lock(&cd->system_lock); - if (cd->sleep_state == SS_SLEEP_ON) { - mutex_unlock(&cd->system_lock); - return 0; - } - cd->sleep_state = SS_SLEEPING; - mutex_unlock(&cd->system_lock); - - cyttsp4_stop_wd_timer(cd); - - /* Wait until currently running IRQ handler exits and disable IRQ */ - disable_irq(cd->irq); - - dev_vdbg(cd->dev, "%s: write DEEP SLEEP...\n", __func__); - mutex_lock(&cd->system_lock); - rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); - if (rc) { - mutex_unlock(&cd->system_lock); - dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc); - goto error; - } - - if (IS_BOOTLOADER(mode[0], mode[1])) { - mutex_unlock(&cd->system_lock); - dev_err(cd->dev, "%s: Device in BOOTLOADER mode.\n", __func__); - rc = -EINVAL; - goto error; - } - - mode[0] |= CY_HST_SLEEP; - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode[0]), &mode[0]); - mutex_unlock(&cd->system_lock); - if (rc) { - dev_err(cd->dev, "%s: Fail write adapter r=%d\n", __func__, rc); - goto error; - } - dev_vdbg(cd->dev, "%s: write DEEP SLEEP succeeded\n", __func__); - - if (cd->cpdata->power) { - dev_dbg(cd->dev, "%s: Power down HW\n", __func__); - rc = cd->cpdata->power(cd->cpdata, 0, cd->dev, &cd->ignore_irq); - } else { - dev_dbg(cd->dev, "%s: No power function\n", __func__); - rc = 0; - } - if (rc < 0) { - dev_err(cd->dev, "%s: HW Power down fails r=%d\n", - __func__, rc); - goto error; - } - - /* Give time to FW to sleep */ - msleep(50); - - goto exit; - -error: - ss = SS_SLEEP_OFF; - int_status = CY_INT_NONE; - cyttsp4_start_wd_timer(cd); - -exit: - mutex_lock(&cd->system_lock); - cd->sleep_state = ss; - cd->int_status |= int_status; - mutex_unlock(&cd->system_lock); - enable_irq(cd->irq); - return rc; -} - -static int cyttsp4_startup_(struct cyttsp4 *cd) -{ - int retry = CY_CORE_STARTUP_RETRY_COUNT; - int rc; - - cyttsp4_stop_wd_timer(cd); - -reset: - if (retry != CY_CORE_STARTUP_RETRY_COUNT) - dev_dbg(cd->dev, "%s: Retry %d\n", __func__, - CY_CORE_STARTUP_RETRY_COUNT - retry); - - /* reset hardware and wait for heartbeat */ - rc = cyttsp4_reset_and_wait(cd); - if (rc < 0) { - dev_err(cd->dev, "%s: Error on h/w reset r=%d\n", __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - /* exit bl into sysinfo mode */ - dev_vdbg(cd->dev, "%s: write exit ldr...\n", __func__); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_IGNORE; - cd->int_status |= CY_INT_MODE_CHANGE; - - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(ldr_exit), - (u8 *)ldr_exit); - mutex_unlock(&cd->system_lock); - if (rc < 0) { - dev_err(cd->dev, "%s: Fail write r=%d\n", __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - rc = cyttsp4_wait_sysinfo_mode(cd); - if (rc < 0) { - u8 buf[sizeof(ldr_err_app)]; - int rc1; - - /* Check for invalid/corrupted touch application */ - rc1 = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(ldr_err_app), - buf); - if (rc1) { - dev_err(cd->dev, "%s: Fail read r=%d\n", __func__, rc1); - } else if (!memcmp(buf, ldr_err_app, sizeof(ldr_err_app))) { - dev_err(cd->dev, "%s: Error launching touch application\n", - __func__); - mutex_lock(&cd->system_lock); - cd->invalid_touch_app = true; - mutex_unlock(&cd->system_lock); - goto exit_no_wd; - } - - if (retry--) - goto reset; - goto exit; - } - - mutex_lock(&cd->system_lock); - cd->invalid_touch_app = false; - mutex_unlock(&cd->system_lock); - - /* read sysinfo data */ - dev_vdbg(cd->dev, "%s: get sysinfo regs..\n", __func__); - rc = cyttsp4_get_sysinfo_regs(cd); - if (rc < 0) { - dev_err(cd->dev, "%s: failed to get sysinfo regs rc=%d\n", - __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - rc = cyttsp4_set_mode(cd, CY_MODE_OPERATIONAL); - if (rc < 0) { - dev_err(cd->dev, "%s: failed to set mode to operational rc=%d\n", - __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - cyttsp4_lift_all(&cd->md); - - /* restore to sleep if was suspended */ - mutex_lock(&cd->system_lock); - if (cd->sleep_state == SS_SLEEP_ON) { - cd->sleep_state = SS_SLEEP_OFF; - mutex_unlock(&cd->system_lock); - cyttsp4_core_sleep_(cd); - goto exit_no_wd; - } - mutex_unlock(&cd->system_lock); - -exit: - cyttsp4_start_wd_timer(cd); -exit_no_wd: - return rc; -} - -static int cyttsp4_startup(struct cyttsp4 *cd) -{ - int rc; - - mutex_lock(&cd->system_lock); - cd->startup_state = STARTUP_RUNNING; - mutex_unlock(&cd->system_lock); - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - goto exit; - } - - rc = cyttsp4_startup_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - /* Don't return fail code, mode is already changed. */ - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - -exit: - mutex_lock(&cd->system_lock); - cd->startup_state = STARTUP_NONE; - mutex_unlock(&cd->system_lock); - - /* Wake the waiters for end of startup */ - wake_up(&cd->wait_q); - - return rc; -} - -static void cyttsp4_startup_work_function(struct work_struct *work) -{ - struct cyttsp4 *cd = container_of(work, struct cyttsp4, startup_work); - int rc; - - rc = cyttsp4_startup(cd); - if (rc < 0) - dev_err(cd->dev, "%s: Fail queued startup r=%d\n", - __func__, rc); -} - -static void cyttsp4_free_si_ptrs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - - if (!si) - return; - - kfree(si->si_ptrs.cydata); - kfree(si->si_ptrs.test); - kfree(si->si_ptrs.pcfg); - kfree(si->si_ptrs.opcfg); - kfree(si->si_ptrs.ddata); - kfree(si->si_ptrs.mdata); - kfree(si->btn); - kfree(si->xy_mode); - kfree(si->xy_data); - kfree(si->btn_rec_data); -} - -static int cyttsp4_core_sleep(struct cyttsp4 *cd) -{ - int rc; - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - return 0; - } - - rc = cyttsp4_core_sleep_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - - return rc; -} - -static int cyttsp4_core_wake_(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - int rc; - u8 mode; - int t; - - /* Already woken? */ - mutex_lock(&cd->system_lock); - if (cd->sleep_state == SS_SLEEP_OFF) { - mutex_unlock(&cd->system_lock); - return 0; - } - cd->int_status &= ~CY_INT_IGNORE; - cd->int_status |= CY_INT_AWAKE; - cd->sleep_state = SS_WAKING; - - if (cd->cpdata->power) { - dev_dbg(dev, "%s: Power up HW\n", __func__); - rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq); - } else { - dev_dbg(dev, "%s: No power function\n", __func__); - rc = -ENOSYS; - } - if (rc < 0) { - dev_err(dev, "%s: HW Power up fails r=%d\n", - __func__, rc); - - /* Initiate a read transaction to wake up */ - cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); - } else - dev_vdbg(cd->dev, "%s: HW power up succeeds\n", - __func__); - mutex_unlock(&cd->system_lock); - - t = wait_event_timeout(cd->wait_q, - (cd->int_status & CY_INT_AWAKE) == 0, - msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT)); - if (IS_TMO(t)) { - dev_err(dev, "%s: TMO waiting for wakeup\n", __func__); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_AWAKE; - /* Try starting up */ - cyttsp4_queue_startup_(cd); - mutex_unlock(&cd->system_lock); - } - - mutex_lock(&cd->system_lock); - cd->sleep_state = SS_SLEEP_OFF; - mutex_unlock(&cd->system_lock); - - cyttsp4_start_wd_timer(cd); - - return 0; -} - -static int cyttsp4_core_wake(struct cyttsp4 *cd) -{ - int rc; - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - return 0; - } - - rc = cyttsp4_core_wake_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - - return rc; -} - -static int cyttsp4_core_suspend(struct device *dev) -{ - struct cyttsp4 *cd = dev_get_drvdata(dev); - struct cyttsp4_mt_data *md = &cd->md; - int rc; - - md->is_suspended = true; - - rc = cyttsp4_core_sleep(cd); - if (rc < 0) { - dev_err(dev, "%s: Error on sleep\n", __func__); - return -EAGAIN; - } - return 0; -} - -static int cyttsp4_core_resume(struct device *dev) -{ - struct cyttsp4 *cd = dev_get_drvdata(dev); - struct cyttsp4_mt_data *md = &cd->md; - int rc; - - md->is_suspended = false; - - rc = cyttsp4_core_wake(cd); - if (rc < 0) { - dev_err(dev, "%s: Error on wake\n", __func__); - return -EAGAIN; - } - - return 0; -} - -EXPORT_GPL_RUNTIME_DEV_PM_OPS(cyttsp4_pm_ops, - cyttsp4_core_suspend, cyttsp4_core_resume, NULL); - -static int cyttsp4_mt_open(struct input_dev *input) -{ - pm_runtime_get(input->dev.parent); - return 0; -} - -static void cyttsp4_mt_close(struct input_dev *input) -{ - struct cyttsp4_mt_data *md = input_get_drvdata(input); - mutex_lock(&md->report_lock); - if (!md->is_suspended) - pm_runtime_put(input->dev.parent); - mutex_unlock(&md->report_lock); -} - - -static int cyttsp4_setup_input_device(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - struct cyttsp4_mt_data *md = &cd->md; - int signal = CY_IGNORE_VALUE; - int max_x, max_y, max_p, min, max; - int max_x_tmp, max_y_tmp; - int i; - int rc; - - dev_vdbg(dev, "%s: Initialize event signals\n", __func__); - __set_bit(EV_ABS, md->input->evbit); - __set_bit(EV_REL, md->input->evbit); - __set_bit(EV_KEY, md->input->evbit); - - max_x_tmp = md->si->si_ofs.max_x; - max_y_tmp = md->si->si_ofs.max_y; - - /* get maximum values from the sysinfo data */ - if (md->pdata->flags & CY_FLAG_FLIP) { - max_x = max_y_tmp - 1; - max_y = max_x_tmp - 1; - } else { - max_x = max_x_tmp - 1; - max_y = max_y_tmp - 1; - } - max_p = md->si->si_ofs.max_p; - - /* set event signal capabilities */ - for (i = 0; i < (md->pdata->frmwrk->size / CY_NUM_ABS_SET); i++) { - signal = md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_SIGNAL_OST]; - if (signal != CY_IGNORE_VALUE) { - __set_bit(signal, md->input->absbit); - min = md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_MIN_OST]; - max = md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_MAX_OST]; - if (i == CY_ABS_ID_OST) { - /* shift track ids down to start at 0 */ - max = max - min; - min = min - min; - } else if (i == CY_ABS_X_OST) - max = max_x; - else if (i == CY_ABS_Y_OST) - max = max_y; - else if (i == CY_ABS_P_OST) - max = max_p; - input_set_abs_params(md->input, signal, min, max, - md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_FUZZ_OST], - md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_FLAT_OST]); - dev_dbg(dev, "%s: register signal=%02X min=%d max=%d\n", - __func__, signal, min, max); - if ((i == CY_ABS_ID_OST) && - (md->si->si_ofs.tch_rec_size < - CY_TMA4XX_TCH_REC_SIZE)) - break; - } - } - - input_mt_init_slots(md->input, md->si->si_ofs.tch_abs[CY_TCH_T].max, - INPUT_MT_DIRECT); - rc = input_register_device(md->input); - if (rc < 0) - dev_err(dev, "%s: Error, failed register input device r=%d\n", - __func__, rc); - return rc; -} - -static int cyttsp4_mt_probe(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - struct cyttsp4_mt_data *md = &cd->md; - struct cyttsp4_mt_platform_data *pdata = cd->pdata->mt_pdata; - int rc = 0; - - mutex_init(&md->report_lock); - md->pdata = pdata; - /* Create the input device and register it. */ - dev_vdbg(dev, "%s: Create the input device and register it\n", - __func__); - md->input = input_allocate_device(); - if (md->input == NULL) { - dev_err(dev, "%s: Error, failed to allocate input device\n", - __func__); - rc = -ENOSYS; - goto error_alloc_failed; - } - - md->input->name = pdata->inp_dev_name; - scnprintf(md->phys, sizeof(md->phys)-1, "%s", dev_name(dev)); - md->input->phys = md->phys; - md->input->id.bustype = cd->bus_ops->bustype; - md->input->dev.parent = dev; - md->input->open = cyttsp4_mt_open; - md->input->close = cyttsp4_mt_close; - input_set_drvdata(md->input, md); - - /* get sysinfo */ - md->si = &cd->sysinfo; - - rc = cyttsp4_setup_input_device(cd); - if (rc) - goto error_init_input; - - return 0; - -error_init_input: - input_free_device(md->input); -error_alloc_failed: - dev_err(dev, "%s failed.\n", __func__); - return rc; -} - -struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops, - struct device *dev, u16 irq, size_t xfer_buf_size) -{ - struct cyttsp4 *cd; - struct cyttsp4_platform_data *pdata = dev_get_platdata(dev); - unsigned long irq_flags; - int rc = 0; - - if (!pdata || !pdata->core_pdata || !pdata->mt_pdata) { - dev_err(dev, "%s: Missing platform data\n", __func__); - rc = -ENODEV; - goto error_no_pdata; - } - - cd = kzalloc(sizeof(*cd), GFP_KERNEL); - if (!cd) { - dev_err(dev, "%s: Error, kzalloc\n", __func__); - rc = -ENOMEM; - goto error_alloc_data; - } - - cd->xfer_buf = kzalloc(xfer_buf_size, GFP_KERNEL); - if (!cd->xfer_buf) { - dev_err(dev, "%s: Error, kzalloc\n", __func__); - rc = -ENOMEM; - goto error_free_cd; - } - - /* Initialize device info */ - cd->dev = dev; - cd->pdata = pdata; - cd->cpdata = pdata->core_pdata; - cd->bus_ops = ops; - - /* Initialize mutexes and spinlocks */ - mutex_init(&cd->system_lock); - mutex_init(&cd->adap_lock); - - /* Initialize wait queue */ - init_waitqueue_head(&cd->wait_q); - - /* Initialize works */ - INIT_WORK(&cd->startup_work, cyttsp4_startup_work_function); - INIT_WORK(&cd->watchdog_work, cyttsp4_watchdog_work); - - /* Initialize IRQ */ - cd->irq = gpio_to_irq(cd->cpdata->irq_gpio); - if (cd->irq < 0) { - rc = -EINVAL; - goto error_free_xfer; - } - - dev_set_drvdata(dev, cd); - - /* Call platform init function */ - if (cd->cpdata->init) { - dev_dbg(cd->dev, "%s: Init HW\n", __func__); - rc = cd->cpdata->init(cd->cpdata, 1, cd->dev); - } else { - dev_dbg(cd->dev, "%s: No HW INIT function\n", __func__); - rc = 0; - } - if (rc < 0) - dev_err(cd->dev, "%s: HW Init fail r=%d\n", __func__, rc); - - dev_dbg(dev, "%s: initialize threaded irq=%d\n", __func__, cd->irq); - if (cd->cpdata->level_irq_udelay > 0) - /* use level triggered interrupts */ - irq_flags = IRQF_TRIGGER_LOW | IRQF_ONESHOT; - else - /* use edge triggered interrupts */ - irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; - - rc = request_threaded_irq(cd->irq, NULL, cyttsp4_irq, irq_flags, - dev_name(dev), cd); - if (rc < 0) { - dev_err(dev, "%s: Error, could not request irq\n", __func__); - goto error_request_irq; - } - - /* Setup watchdog timer */ - timer_setup(&cd->watchdog_timer, cyttsp4_watchdog_timer, 0); - - /* - * call startup directly to ensure that the device - * is tested before leaving the probe - */ - rc = cyttsp4_startup(cd); - - /* Do not fail probe if startup fails but the device is detected */ - if (rc < 0 && cd->mode == CY_MODE_UNKNOWN) { - dev_err(cd->dev, "%s: Fail initial startup r=%d\n", - __func__, rc); - goto error_startup; - } - - rc = cyttsp4_mt_probe(cd); - if (rc < 0) { - dev_err(dev, "%s: Error, fail mt probe\n", __func__); - goto error_startup; - } - - pm_runtime_enable(dev); - - return cd; - -error_startup: - cancel_work_sync(&cd->startup_work); - cyttsp4_stop_wd_timer(cd); - pm_runtime_disable(dev); - cyttsp4_free_si_ptrs(cd); - free_irq(cd->irq, cd); -error_request_irq: - if (cd->cpdata->init) - cd->cpdata->init(cd->cpdata, 0, dev); -error_free_xfer: - kfree(cd->xfer_buf); -error_free_cd: - kfree(cd); -error_alloc_data: -error_no_pdata: - dev_err(dev, "%s failed.\n", __func__); - return ERR_PTR(rc); -} -EXPORT_SYMBOL_GPL(cyttsp4_probe); - -static void cyttsp4_mt_release(struct cyttsp4_mt_data *md) -{ - input_unregister_device(md->input); - input_set_drvdata(md->input, NULL); -} - -int cyttsp4_remove(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - - cyttsp4_mt_release(&cd->md); - - /* - * Suspend the device before freeing the startup_work and stopping - * the watchdog since sleep function restarts watchdog on failure - */ - pm_runtime_suspend(dev); - pm_runtime_disable(dev); - - cancel_work_sync(&cd->startup_work); - - cyttsp4_stop_wd_timer(cd); - - free_irq(cd->irq, cd); - if (cd->cpdata->init) - cd->cpdata->init(cd->cpdata, 0, dev); - cyttsp4_free_si_ptrs(cd); - kfree(cd); - return 0; -} -EXPORT_SYMBOL_GPL(cyttsp4_remove); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen core driver"); -MODULE_AUTHOR("Cypress"); diff --git a/drivers/input/touchscreen/cyttsp4_core.h b/drivers/input/touchscreen/cyttsp4_core.h deleted file mode 100644 index 6262f6e45075..000000000000 --- a/drivers/input/touchscreen/cyttsp4_core.h +++ /dev/null @@ -1,448 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * cyttsp4_core.h - * Cypress TrueTouch(TM) Standard Product V4 Core driver module. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2012 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com> - */ - -#ifndef _LINUX_CYTTSP4_CORE_H -#define _LINUX_CYTTSP4_CORE_H - -#include <linux/device.h> -#include <linux/err.h> -#include <linux/input.h> -#include <linux/kernel.h> -#include <linux/limits.h> -#include <linux/module.h> -#include <linux/stringify.h> -#include <linux/types.h> -#include <linux/platform_data/cyttsp4.h> - -#define CY_REG_BASE 0x00 - -#define CY_POST_CODEL_WDG_RST 0x01 -#define CY_POST_CODEL_CFG_DATA_CRC_FAIL 0x02 -#define CY_POST_CODEL_PANEL_TEST_FAIL 0x04 - -#define CY_NUM_BTN_PER_REG 4 - -/* touch record system information offset masks and shifts */ -#define CY_BYTE_OFS_MASK 0x1F -#define CY_BOFS_MASK 0xE0 -#define CY_BOFS_SHIFT 5 - -#define CY_TMA1036_TCH_REC_SIZE 6 -#define CY_TMA4XX_TCH_REC_SIZE 9 -#define CY_TMA1036_MAX_TCH 0x0E -#define CY_TMA4XX_MAX_TCH 0x1E - -#define CY_NORMAL_ORIGIN 0 /* upper, left corner */ -#define CY_INVERT_ORIGIN 1 /* lower, right corner */ - -/* helpers */ -#define GET_NUM_TOUCHES(x) ((x) & 0x1F) -#define IS_LARGE_AREA(x) ((x) & 0x20) -#define IS_BAD_PKT(x) ((x) & 0x20) -#define IS_BOOTLOADER(hst_mode, reset_detect) \ - ((hst_mode) & 0x01 || (reset_detect) != 0) -#define IS_TMO(t) ((t) == 0) - - -enum cyttsp_cmd_bits { - CY_CMD_COMPLETE = (1 << 6), -}; - -/* Timeout in ms. */ -#define CY_WATCHDOG_TIMEOUT 1000 - -#define CY_MAX_PRINT_SIZE 512 -#ifdef VERBOSE_DEBUG -#define CY_MAX_PRBUF_SIZE PIPE_BUF -#define CY_PR_TRUNCATED " truncated..." -#endif - -enum cyttsp4_ic_grpnum { - CY_IC_GRPNUM_RESERVED, - CY_IC_GRPNUM_CMD_REGS, - CY_IC_GRPNUM_TCH_REP, - CY_IC_GRPNUM_DATA_REC, - CY_IC_GRPNUM_TEST_REC, - CY_IC_GRPNUM_PCFG_REC, - CY_IC_GRPNUM_TCH_PARM_VAL, - CY_IC_GRPNUM_TCH_PARM_SIZE, - CY_IC_GRPNUM_RESERVED1, - CY_IC_GRPNUM_RESERVED2, - CY_IC_GRPNUM_OPCFG_REC, - CY_IC_GRPNUM_DDATA_REC, - CY_IC_GRPNUM_MDATA_REC, - CY_IC_GRPNUM_TEST_REGS, - CY_IC_GRPNUM_BTN_KEYS, - CY_IC_GRPNUM_TTHE_REGS, - CY_IC_GRPNUM_NUM -}; - -enum cyttsp4_int_state { - CY_INT_NONE, - CY_INT_IGNORE = (1 << 0), - CY_INT_MODE_CHANGE = (1 << 1), - CY_INT_EXEC_CMD = (1 << 2), - CY_INT_AWAKE = (1 << 3), -}; - -enum cyttsp4_mode { - CY_MODE_UNKNOWN, - CY_MODE_BOOTLOADER = (1 << 1), - CY_MODE_OPERATIONAL = (1 << 2), - CY_MODE_SYSINFO = (1 << 3), - CY_MODE_CAT = (1 << 4), - CY_MODE_STARTUP = (1 << 5), - CY_MODE_LOADER = (1 << 6), - CY_MODE_CHANGE_MODE = (1 << 7), - CY_MODE_CHANGED = (1 << 8), - CY_MODE_CMD_COMPLETE = (1 << 9), -}; - -enum cyttsp4_sleep_state { - SS_SLEEP_OFF, - SS_SLEEP_ON, - SS_SLEEPING, - SS_WAKING, -}; - -enum cyttsp4_startup_state { - STARTUP_NONE, - STARTUP_QUEUED, - STARTUP_RUNNING, -}; - -#define CY_NUM_REVCTRL 8 -struct cyttsp4_cydata { - u8 ttpidh; - u8 ttpidl; - u8 fw_ver_major; - u8 fw_ver_minor; - u8 revctrl[CY_NUM_REVCTRL]; - u8 blver_major; - u8 blver_minor; - u8 jtag_si_id3; - u8 jtag_si_id2; - u8 jtag_si_id1; - u8 jtag_si_id0; - u8 mfgid_sz; - u8 cyito_idh; - u8 cyito_idl; - u8 cyito_verh; - u8 cyito_verl; - u8 ttsp_ver_major; - u8 ttsp_ver_minor; - u8 device_info; - u8 mfg_id[]; -} __packed; - -struct cyttsp4_test { - u8 post_codeh; - u8 post_codel; -} __packed; - -struct cyttsp4_pcfg { - u8 electrodes_x; - u8 electrodes_y; - u8 len_xh; - u8 len_xl; - u8 len_yh; - u8 len_yl; - u8 res_xh; - u8 res_xl; - u8 res_yh; - u8 res_yl; - u8 max_zh; - u8 max_zl; - u8 panel_info0; -} __packed; - -struct cyttsp4_tch_rec_params { - u8 loc; - u8 size; -} __packed; - -#define CY_NUM_TCH_FIELDS 7 -#define CY_NUM_EXT_TCH_FIELDS 3 -struct cyttsp4_opcfg { - u8 cmd_ofs; - u8 rep_ofs; - u8 rep_szh; - u8 rep_szl; - u8 num_btns; - u8 tt_stat_ofs; - u8 obj_cfg0; - u8 max_tchs; - u8 tch_rec_size; - struct cyttsp4_tch_rec_params tch_rec_old[CY_NUM_TCH_FIELDS]; - u8 btn_rec_size; /* btn record size (in bytes) */ - u8 btn_diff_ofs; /* btn data loc, diff counts */ - u8 btn_diff_size; /* btn size of diff counts (in bits) */ - struct cyttsp4_tch_rec_params tch_rec_new[CY_NUM_EXT_TCH_FIELDS]; -} __packed; - -struct cyttsp4_sysinfo_ptr { - struct cyttsp4_cydata *cydata; - struct cyttsp4_test *test; - struct cyttsp4_pcfg *pcfg; - struct cyttsp4_opcfg *opcfg; - struct cyttsp4_ddata *ddata; - struct cyttsp4_mdata *mdata; -} __packed; - -struct cyttsp4_sysinfo_data { - u8 hst_mode; - u8 reserved; - u8 map_szh; - u8 map_szl; - u8 cydata_ofsh; - u8 cydata_ofsl; - u8 test_ofsh; - u8 test_ofsl; - u8 pcfg_ofsh; - u8 pcfg_ofsl; - u8 opcfg_ofsh; - u8 opcfg_ofsl; - u8 ddata_ofsh; - u8 ddata_ofsl; - u8 mdata_ofsh; - u8 mdata_ofsl; -} __packed; - -enum cyttsp4_tch_abs { /* for ordering within the extracted touch data array */ - CY_TCH_X, /* X */ - CY_TCH_Y, /* Y */ - CY_TCH_P, /* P (Z) */ - CY_TCH_T, /* TOUCH ID */ - CY_TCH_E, /* EVENT ID */ - CY_TCH_O, /* OBJECT ID */ - CY_TCH_W, /* SIZE */ - CY_TCH_MAJ, /* TOUCH_MAJOR */ - CY_TCH_MIN, /* TOUCH_MINOR */ - CY_TCH_OR, /* ORIENTATION */ - CY_TCH_NUM_ABS -}; - -struct cyttsp4_touch { - int abs[CY_TCH_NUM_ABS]; -}; - -struct cyttsp4_tch_abs_params { - size_t ofs; /* abs byte offset */ - size_t size; /* size in bits */ - size_t max; /* max value */ - size_t bofs; /* bit offset */ -}; - -struct cyttsp4_sysinfo_ofs { - size_t chip_type; - size_t cmd_ofs; - size_t rep_ofs; - size_t rep_sz; - size_t num_btns; - size_t num_btn_regs; /* ceil(num_btns/4) */ - size_t tt_stat_ofs; - size_t tch_rec_size; - size_t obj_cfg0; - size_t max_tchs; - size_t mode_size; - size_t data_size; - size_t map_sz; - size_t max_x; - size_t x_origin; /* left or right corner */ - size_t max_y; - size_t y_origin; /* upper or lower corner */ - size_t max_p; - size_t cydata_ofs; - size_t test_ofs; - size_t pcfg_ofs; - size_t opcfg_ofs; - size_t ddata_ofs; - size_t mdata_ofs; - size_t cydata_size; - size_t test_size; - size_t pcfg_size; - size_t opcfg_size; - size_t ddata_size; - size_t mdata_size; - size_t btn_keys_size; - struct cyttsp4_tch_abs_params tch_abs[CY_TCH_NUM_ABS]; - size_t btn_rec_size; /* btn record size (in bytes) */ - size_t btn_diff_ofs;/* btn data loc ,diff counts, (Op-Mode byte ofs) */ - size_t btn_diff_size;/* btn size of diff counts (in bits) */ -}; - -enum cyttsp4_btn_state { - CY_BTN_RELEASED, - CY_BTN_PRESSED, - CY_BTN_NUM_STATE -}; - -struct cyttsp4_btn { - bool enabled; - int state; /* CY_BTN_PRESSED, CY_BTN_RELEASED */ - int key_code; -}; - -struct cyttsp4_sysinfo { - bool ready; - struct cyttsp4_sysinfo_data si_data; - struct cyttsp4_sysinfo_ptr si_ptrs; - struct cyttsp4_sysinfo_ofs si_ofs; - struct cyttsp4_btn *btn; /* button states */ - u8 *btn_rec_data; /* button diff count data */ - u8 *xy_mode; /* operational mode and status regs */ - u8 *xy_data; /* operational touch regs */ -}; - -struct cyttsp4_mt_data { - struct cyttsp4_mt_platform_data *pdata; - struct cyttsp4_sysinfo *si; - struct input_dev *input; - struct mutex report_lock; - bool is_suspended; - char phys[NAME_MAX]; - int num_prv_tch; -}; - -struct cyttsp4 { - struct device *dev; - struct mutex system_lock; - struct mutex adap_lock; - enum cyttsp4_mode mode; - enum cyttsp4_sleep_state sleep_state; - enum cyttsp4_startup_state startup_state; - int int_status; - wait_queue_head_t wait_q; - int irq; - struct work_struct startup_work; - struct work_struct watchdog_work; - struct timer_list watchdog_timer; - struct cyttsp4_sysinfo sysinfo; - void *exclusive_dev; - int exclusive_waits; - atomic_t ignore_irq; - bool invalid_touch_app; - struct cyttsp4_mt_data md; - struct cyttsp4_platform_data *pdata; - struct cyttsp4_core_platform_data *cpdata; - const struct cyttsp4_bus_ops *bus_ops; - u8 *xfer_buf; -#ifdef VERBOSE_DEBUG - u8 pr_buf[CY_MAX_PRBUF_SIZE]; -#endif -}; - -struct cyttsp4_bus_ops { - u16 bustype; - int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length, - const void *values); - int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length, - void *values); -}; - -enum cyttsp4_hst_mode_bits { - CY_HST_TOGGLE = (1 << 7), - CY_HST_MODE_CHANGE = (1 << 3), - CY_HST_MODE = (7 << 4), - CY_HST_OPERATE = (0 << 4), - CY_HST_SYSINFO = (1 << 4), - CY_HST_CAT = (2 << 4), - CY_HST_LOWPOW = (1 << 2), - CY_HST_SLEEP = (1 << 1), - CY_HST_RESET = (1 << 0), -}; - -/* abs settings */ -#define CY_IGNORE_VALUE 0xFFFF - -/* abs signal capabilities offsets in the frameworks array */ -enum cyttsp4_sig_caps { - CY_SIGNAL_OST, - CY_MIN_OST, - CY_MAX_OST, - CY_FUZZ_OST, - CY_FLAT_OST, - CY_NUM_ABS_SET /* number of signal capability fields */ -}; - -/* abs axis signal offsets in the framworks array */ -enum cyttsp4_sig_ost { - CY_ABS_X_OST, - CY_ABS_Y_OST, - CY_ABS_P_OST, - CY_ABS_W_OST, - CY_ABS_ID_OST, - CY_ABS_MAJ_OST, - CY_ABS_MIN_OST, - CY_ABS_OR_OST, - CY_NUM_ABS_OST /* number of abs signals */ -}; - -enum cyttsp4_flags { - CY_FLAG_NONE = 0x00, - CY_FLAG_HOVER = 0x04, - CY_FLAG_FLIP = 0x08, - CY_FLAG_INV_X = 0x10, - CY_FLAG_INV_Y = 0x20, - CY_FLAG_VKEYS = 0x40, -}; - -enum cyttsp4_object_id { - CY_OBJ_STANDARD_FINGER, - CY_OBJ_LARGE_OBJECT, - CY_OBJ_STYLUS, - CY_OBJ_HOVER, -}; - -enum cyttsp4_event_id { - CY_EV_NO_EVENT, - CY_EV_TOUCHDOWN, - CY_EV_MOVE, /* significant displacement (> act dist) */ - CY_EV_LIFTOFF, /* record reports last position */ -}; - -/* x-axis resolution of panel in pixels */ -#define CY_PCFG_RESOLUTION_X_MASK 0x7F - -/* y-axis resolution of panel in pixels */ -#define CY_PCFG_RESOLUTION_Y_MASK 0x7F - -/* x-axis, 0:origin is on left side of panel, 1: right */ -#define CY_PCFG_ORIGIN_X_MASK 0x80 - -/* y-axis, 0:origin is on top side of panel, 1: bottom */ -#define CY_PCFG_ORIGIN_Y_MASK 0x80 - -static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u16 addr, int size, - void *buf) -{ - return ts->bus_ops->read(ts->dev, ts->xfer_buf, addr, size, buf); -} - -static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u16 addr, int size, - const void *buf) -{ - return ts->bus_ops->write(ts->dev, ts->xfer_buf, addr, size, buf); -} - -extern struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops, - struct device *dev, u16 irq, size_t xfer_buf_size); -extern int cyttsp4_remove(struct cyttsp4 *ts); -int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, const void *values); -int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, void *values); -extern const struct dev_pm_ops cyttsp4_pm_ops; - -#endif /* _LINUX_CYTTSP4_CORE_H */ diff --git a/drivers/input/touchscreen/cyttsp4_i2c.c b/drivers/input/touchscreen/cyttsp4_i2c.c deleted file mode 100644 index da32c151def5..000000000000 --- a/drivers/input/touchscreen/cyttsp4_i2c.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * cyttsp_i2c.c - * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> - * Copyright (C) 2013 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com> - */ - -#include "cyttsp4_core.h" - -#include <linux/i2c.h> -#include <linux/input.h> - -#define CYTTSP4_I2C_DATA_SIZE (3 * 256) - -static const struct cyttsp4_bus_ops cyttsp4_i2c_bus_ops = { - .bustype = BUS_I2C, - .write = cyttsp_i2c_write_block_data, - .read = cyttsp_i2c_read_block_data, -}; - -static int cyttsp4_i2c_probe(struct i2c_client *client) -{ - struct cyttsp4 *ts; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(&client->dev, "I2C functionality not Supported\n"); - return -EIO; - } - - ts = cyttsp4_probe(&cyttsp4_i2c_bus_ops, &client->dev, client->irq, - CYTTSP4_I2C_DATA_SIZE); - - return PTR_ERR_OR_ZERO(ts); -} - -static void cyttsp4_i2c_remove(struct i2c_client *client) -{ - struct cyttsp4 *ts = i2c_get_clientdata(client); - - cyttsp4_remove(ts); -} - -static const struct i2c_device_id cyttsp4_i2c_id[] = { - { CYTTSP4_I2C_NAME }, - { } -}; -MODULE_DEVICE_TABLE(i2c, cyttsp4_i2c_id); - -static struct i2c_driver cyttsp4_i2c_driver = { - .driver = { - .name = CYTTSP4_I2C_NAME, - .pm = pm_ptr(&cyttsp4_pm_ops), - }, - .probe = cyttsp4_i2c_probe, - .remove = cyttsp4_i2c_remove, - .id_table = cyttsp4_i2c_id, -}; - -module_i2c_driver(cyttsp4_i2c_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver"); -MODULE_AUTHOR("Cypress"); diff --git a/drivers/input/touchscreen/cyttsp4_spi.c b/drivers/input/touchscreen/cyttsp4_spi.c deleted file mode 100644 index 944fbbe9113e..000000000000 --- a/drivers/input/touchscreen/cyttsp4_spi.c +++ /dev/null @@ -1,187 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Source for: - * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> - * Copyright (C) 2013 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com> - */ - -#include "cyttsp4_core.h" - -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/spi/spi.h> - -#define CY_SPI_WR_OP 0x00 /* r/~w */ -#define CY_SPI_RD_OP 0x01 -#define CY_SPI_BITS_PER_WORD 8 -#define CY_SPI_A8_BIT 0x02 -#define CY_SPI_WR_HEADER_BYTES 2 -#define CY_SPI_RD_HEADER_BYTES 1 -#define CY_SPI_CMD_BYTES 2 -#define CY_SPI_SYNC_BYTE 0 -#define CY_SPI_SYNC_ACK 0x62 /* from TRM *A protocol */ -#define CY_SPI_DATA_SIZE (2 * 256) - -#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE) - -static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf, - u8 op, u16 reg, u8 *buf, int length) -{ - struct spi_device *spi = to_spi_device(dev); - struct spi_message msg; - struct spi_transfer xfer[2]; - u8 *wr_buf = &xfer_buf[0]; - u8 rd_buf[CY_SPI_CMD_BYTES]; - int retval; - int i; - - if (length > CY_SPI_DATA_SIZE) { - dev_err(dev, "%s: length %d is too big.\n", - __func__, length); - return -EINVAL; - } - - memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); - memset(rd_buf, 0, CY_SPI_CMD_BYTES); - - wr_buf[0] = op + (((reg >> 8) & 0x1) ? CY_SPI_A8_BIT : 0); - if (op == CY_SPI_WR_OP) { - wr_buf[1] = reg & 0xFF; - if (length > 0) - memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); - } - - memset(xfer, 0, sizeof(xfer)); - spi_message_init(&msg); - - /* - We set both TX and RX buffers because Cypress TTSP - requires full duplex operation. - */ - xfer[0].tx_buf = wr_buf; - xfer[0].rx_buf = rd_buf; - switch (op) { - case CY_SPI_WR_OP: - xfer[0].len = length + CY_SPI_CMD_BYTES; - spi_message_add_tail(&xfer[0], &msg); - break; - - case CY_SPI_RD_OP: - xfer[0].len = CY_SPI_RD_HEADER_BYTES; - spi_message_add_tail(&xfer[0], &msg); - - xfer[1].rx_buf = buf; - xfer[1].len = length; - spi_message_add_tail(&xfer[1], &msg); - break; - - default: - dev_err(dev, "%s: bad operation code=%d\n", __func__, op); - return -EINVAL; - } - - retval = spi_sync(spi, &msg); - if (retval < 0) { - dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n", - __func__, retval, xfer[1].len, op); - - /* - * do not return here since was a bad ACK sequence - * let the following ACK check handle any errors and - * allow silent retries - */ - } - - if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) { - dev_dbg(dev, "%s: operation %d failed\n", __func__, op); - - for (i = 0; i < CY_SPI_CMD_BYTES; i++) - dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n", - __func__, i, rd_buf[i]); - for (i = 0; i < length; i++) - dev_dbg(dev, "%s: test buf[%d]:0x%02x\n", - __func__, i, buf[i]); - - return -EIO; - } - - return 0; -} - -static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, void *data) -{ - int rc; - - rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0); - if (rc) - return rc; - else - return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data, - length); -} - -static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, const void *data) -{ - return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data, - length); -} - -static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = { - .bustype = BUS_SPI, - .write = cyttsp_spi_write_block_data, - .read = cyttsp_spi_read_block_data, -}; - -static int cyttsp4_spi_probe(struct spi_device *spi) -{ - struct cyttsp4 *ts; - int error; - - /* Set up SPI*/ - spi->bits_per_word = CY_SPI_BITS_PER_WORD; - spi->mode = SPI_MODE_0; - error = spi_setup(spi); - if (error < 0) { - dev_err(&spi->dev, "%s: SPI setup error %d\n", - __func__, error); - return error; - } - - ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, - CY_SPI_DATA_BUF_SIZE); - - return PTR_ERR_OR_ZERO(ts); -} - -static void cyttsp4_spi_remove(struct spi_device *spi) -{ - struct cyttsp4 *ts = spi_get_drvdata(spi); - cyttsp4_remove(ts); -} - -static struct spi_driver cyttsp4_spi_driver = { - .driver = { - .name = CYTTSP4_SPI_NAME, - .pm = pm_ptr(&cyttsp4_pm_ops), - }, - .probe = cyttsp4_spi_probe, - .remove = cyttsp4_spi_remove, -}; - -module_spi_driver(cyttsp4_spi_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); -MODULE_AUTHOR("Cypress"); -MODULE_ALIAS("spi:cyttsp4"); diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c index 132ed5786e84..b8ce6012364c 100644 --- a/drivers/input/touchscreen/cyttsp_core.c +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -17,7 +17,6 @@ #include <linux/input.h> #include <linux/input/mt.h> #include <linux/input/touchscreen.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/property.h> @@ -615,17 +614,14 @@ static int cyttsp_parse_properties(struct cyttsp *ts) return 0; } -static void cyttsp_disable_regulators(void *_ts) -{ - struct cyttsp *ts = _ts; - - regulator_bulk_disable(ARRAY_SIZE(ts->regulators), - ts->regulators); -} - struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, struct device *dev, int irq, size_t xfer_buf_size) { + /* + * VCPIN is the analog voltage supply + * VDD is the digital voltage supply + */ + static const char * const supplies[] = { "vcpin", "vdd" }; struct cyttsp *ts; struct input_dev *input_dev; int error; @@ -643,29 +639,10 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, ts->bus_ops = bus_ops; ts->irq = irq; - /* - * VCPIN is the analog voltage supply - * VDD is the digital voltage supply - */ - ts->regulators[0].supply = "vcpin"; - ts->regulators[1].supply = "vdd"; - error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->regulators), - ts->regulators); - if (error) { - dev_err(dev, "Failed to get regulators: %d\n", error); - return ERR_PTR(error); - } - - error = regulator_bulk_enable(ARRAY_SIZE(ts->regulators), - ts->regulators); - if (error) { - dev_err(dev, "Cannot enable regulators: %d\n", error); - return ERR_PTR(error); - } - - error = devm_add_action_or_reset(dev, cyttsp_disable_regulators, ts); + error = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(supplies), + supplies); if (error) { - dev_err(dev, "failed to install chip disable handler\n"); + dev_err(dev, "Failed to enable regulators: %d\n", error); return ERR_PTR(error); } diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h index 075509e695a2..40a605d20285 100644 --- a/drivers/input/touchscreen/cyttsp_core.h +++ b/drivers/input/touchscreen/cyttsp_core.h @@ -122,7 +122,6 @@ struct cyttsp { enum cyttsp_state state; bool suspended; - struct regulator_bulk_data regulators[2]; struct gpio_desc *reset_gpio; bool use_hndshk; u8 act_dist; @@ -137,10 +136,6 @@ struct cyttsp { struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, struct device *dev, int irq, size_t xfer_buf_size); -int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, const void *values); -int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, void *values); extern const struct dev_pm_ops cyttsp_pm_ops; #endif /* __CYTTSP_CORE_H__ */ diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c index bf13b3448a6b..cb15600549cd 100644 --- a/drivers/input/touchscreen/cyttsp_i2c.c +++ b/drivers/input/touchscreen/cyttsp_i2c.c @@ -22,6 +22,61 @@ #define CY_I2C_DATA_SIZE 128 +static int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, + u16 addr, u8 length, void *values) +{ + struct i2c_client *client = to_i2c_client(dev); + u8 client_addr = client->addr | ((addr >> 8) & 0x1); + u8 addr_lo = addr & 0xFF; + struct i2c_msg msgs[] = { + { + .addr = client_addr, + .flags = 0, + .len = 1, + .buf = &addr_lo, + }, + { + .addr = client_addr, + .flags = I2C_M_RD, + .len = length, + .buf = values, + }, + }; + int retval; + + retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (retval < 0) + return retval; + + return retval != ARRAY_SIZE(msgs) ? -EIO : 0; +} + +static int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, + u16 addr, u8 length, const void *values) +{ + struct i2c_client *client = to_i2c_client(dev); + u8 client_addr = client->addr | ((addr >> 8) & 0x1); + u8 addr_lo = addr & 0xFF; + struct i2c_msg msgs[] = { + { + .addr = client_addr, + .flags = 0, + .len = length + 1, + .buf = xfer_buf, + }, + }; + int retval; + + xfer_buf[0] = addr_lo; + memcpy(&xfer_buf[1], values, length); + + retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (retval < 0) + return retval; + + return retval != ARRAY_SIZE(msgs) ? -EIO : 0; +} + static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = { .bustype = BUS_I2C, .write = cyttsp_i2c_write_block_data, diff --git a/drivers/input/touchscreen/cyttsp_i2c_common.c b/drivers/input/touchscreen/cyttsp_i2c_common.c deleted file mode 100644 index 7e752fb9fad7..000000000000 --- a/drivers/input/touchscreen/cyttsp_i2c_common.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * cyttsp_i2c_common.c - * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver. - * For use with Cypress Txx3xx and Txx4xx parts. - * Supported parts include: - * CY8CTST341 - * CY8CTMA340 - * TMA4XX - * TMA1036 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> - * - * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com> - */ - -#include <linux/device.h> -#include <linux/export.h> -#include <linux/i2c.h> -#include <linux/module.h> -#include <linux/types.h> - -#include "cyttsp4_core.h" - -int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, void *values) -{ - struct i2c_client *client = to_i2c_client(dev); - u8 client_addr = client->addr | ((addr >> 8) & 0x1); - u8 addr_lo = addr & 0xFF; - struct i2c_msg msgs[] = { - { - .addr = client_addr, - .flags = 0, - .len = 1, - .buf = &addr_lo, - }, - { - .addr = client_addr, - .flags = I2C_M_RD, - .len = length, - .buf = values, - }, - }; - int retval; - - retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (retval < 0) - return retval; - - return retval != ARRAY_SIZE(msgs) ? -EIO : 0; -} -EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data); - -int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, const void *values) -{ - struct i2c_client *client = to_i2c_client(dev); - u8 client_addr = client->addr | ((addr >> 8) & 0x1); - u8 addr_lo = addr & 0xFF; - struct i2c_msg msgs[] = { - { - .addr = client_addr, - .flags = 0, - .len = length + 1, - .buf = xfer_buf, - }, - }; - int retval; - - xfer_buf[0] = addr_lo; - memcpy(&xfer_buf[1], values, length); - - retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (retval < 0) - return retval; - - return retval != ARRAY_SIZE(msgs) ? -EIO : 0; -} -EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data); - - -MODULE_DESCRIPTION("Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Cypress"); diff --git a/drivers/input/touchscreen/goodix_berlin.h b/drivers/input/touchscreen/goodix_berlin.h index 1fd77eb69c9a..38b6f9ddbdef 100644 --- a/drivers/input/touchscreen/goodix_berlin.h +++ b/drivers/input/touchscreen/goodix_berlin.h @@ -20,5 +20,6 @@ int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id, struct regmap *regmap); extern const struct dev_pm_ops goodix_berlin_pm_ops; +extern const struct attribute_group *goodix_berlin_groups[]; #endif diff --git a/drivers/input/touchscreen/goodix_berlin_core.c b/drivers/input/touchscreen/goodix_berlin_core.c index e7b41a926ef8..0bfca897ce5a 100644 --- a/drivers/input/touchscreen/goodix_berlin_core.c +++ b/drivers/input/touchscreen/goodix_berlin_core.c @@ -672,6 +672,49 @@ static void goodix_berlin_power_off_act(void *data) goodix_berlin_power_off(cd); } +static ssize_t registers_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct goodix_berlin_core *cd = dev_get_drvdata(dev); + int error; + + error = regmap_raw_read(cd->regmap, off, buf, count); + + return error ? error : count; +} + +static ssize_t registers_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct goodix_berlin_core *cd = dev_get_drvdata(dev); + int error; + + error = regmap_raw_write(cd->regmap, off, buf, count); + + return error ? error : count; +} + +static BIN_ATTR_ADMIN_RW(registers, 0); + +static struct bin_attribute *goodix_berlin_bin_attrs[] = { + &bin_attr_registers, + NULL, +}; + +static const struct attribute_group goodix_berlin_attr_group = { + .bin_attrs = goodix_berlin_bin_attrs, +}; + +const struct attribute_group *goodix_berlin_groups[] = { + &goodix_berlin_attr_group, + NULL, +}; +EXPORT_SYMBOL_GPL(goodix_berlin_groups); + int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id, struct regmap *regmap) { diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c index 2e7098078838..ad7a60d94338 100644 --- a/drivers/input/touchscreen/goodix_berlin_i2c.c +++ b/drivers/input/touchscreen/goodix_berlin_i2c.c @@ -64,6 +64,7 @@ static struct i2c_driver goodix_berlin_i2c_driver = { .name = "goodix-berlin-i2c", .of_match_table = goodix_berlin_i2c_of_match, .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), + .dev_groups = goodix_berlin_groups, }, .probe = goodix_berlin_i2c_probe, .id_table = goodix_berlin_i2c_id, diff --git a/drivers/input/touchscreen/goodix_berlin_spi.c b/drivers/input/touchscreen/goodix_berlin_spi.c index 82774a412956..a2d80e84391b 100644 --- a/drivers/input/touchscreen/goodix_berlin_spi.c +++ b/drivers/input/touchscreen/goodix_berlin_spi.c @@ -169,6 +169,7 @@ static struct spi_driver goodix_berlin_spi_driver = { .name = "goodix-berlin-spi", .of_match_table = goodix_berlin_spi_of_match, .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), + .dev_groups = goodix_berlin_groups, }, .probe = goodix_berlin_spi_probe, .id_table = goodix_berlin_spi_ids, diff --git a/drivers/input/touchscreen/hynitron_cstxxx.c b/drivers/input/touchscreen/hynitron_cstxxx.c index 05946fee4fd4..f72834859282 100644 --- a/drivers/input/touchscreen/hynitron_cstxxx.c +++ b/drivers/input/touchscreen/hynitron_cstxxx.c @@ -470,7 +470,7 @@ static const struct hynitron_ts_chip_data cst3xx_data = { }; static const struct i2c_device_id hyn_tpd_id[] = { - { .name = "hynitron_ts", 0 }, + { .name = "hynitron_ts" }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(i2c, hyn_tpd_id); diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c index 3eb762896345..5569641f05f6 100644 --- a/drivers/input/touchscreen/ilitek_ts_i2c.c +++ b/drivers/input/touchscreen/ilitek_ts_i2c.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/errno.h> #include <linux/acpi.h> @@ -37,6 +36,8 @@ #define ILITEK_TP_CMD_GET_MCU_VER 0x61 #define ILITEK_TP_CMD_GET_IC_MODE 0xC0 +#define ILITEK_TP_I2C_REPORT_ID 0x48 + #define REPORT_COUNT_ADDRESS 61 #define ILITEK_SUPPORT_MAX_POINT 40 @@ -160,15 +161,19 @@ static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts) error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, buf, 64); if (error) { dev_err(dev, "get touch info failed, err:%d\n", error); - goto err_sync_frame; + return error; + } + + if (buf[0] != ILITEK_TP_I2C_REPORT_ID) { + dev_err(dev, "get touch info failed. Wrong id: 0x%02X\n", buf[0]); + return -EINVAL; } report_max_point = buf[REPORT_COUNT_ADDRESS]; if (report_max_point > ts->max_tp) { dev_err(dev, "FW report max point:%d > panel info. max:%d\n", report_max_point, ts->max_tp); - error = -EINVAL; - goto err_sync_frame; + return -EINVAL; } count = DIV_ROUND_UP(report_max_point, packet_max_point); @@ -178,7 +183,7 @@ static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts) if (error) { dev_err(dev, "get touch info. failed, cnt:%d, err:%d\n", count, error); - goto err_sync_frame; + return error; } } @@ -203,10 +208,10 @@ static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts) ilitek_touch_down(ts, id, x, y); } -err_sync_frame: input_mt_sync_frame(input); input_sync(input); - return error; + + return 0; } /* APIs of cmds for ILITEK Touch IC */ diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c deleted file mode 100644 index 5aff8dcda0dc..000000000000 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ /dev/null @@ -1,288 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller - * - * Copyright (C) 2009 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * Based on wm97xx-core.c - */ - -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/irq.h> -#include <linux/platform_data/mcs.h> -#include <linux/slab.h> - -/* Registers */ -#define MCS5000_TS_STATUS 0x00 -#define STATUS_OFFSET 0 -#define STATUS_NO (0 << STATUS_OFFSET) -#define STATUS_INIT (1 << STATUS_OFFSET) -#define STATUS_SENSING (2 << STATUS_OFFSET) -#define STATUS_COORD (3 << STATUS_OFFSET) -#define STATUS_GESTURE (4 << STATUS_OFFSET) -#define ERROR_OFFSET 4 -#define ERROR_NO (0 << ERROR_OFFSET) -#define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET) -#define ERROR_INT_RESET (2 << ERROR_OFFSET) -#define ERROR_EXT_RESET (3 << ERROR_OFFSET) -#define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET) -#define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET) - -#define MCS5000_TS_OP_MODE 0x01 -#define RESET_OFFSET 0 -#define RESET_NO (0 << RESET_OFFSET) -#define RESET_EXT_SOFT (1 << RESET_OFFSET) -#define OP_MODE_OFFSET 1 -#define OP_MODE_SLEEP (0 << OP_MODE_OFFSET) -#define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET) -#define GESTURE_OFFSET 4 -#define GESTURE_DISABLE (0 << GESTURE_OFFSET) -#define GESTURE_ENABLE (1 << GESTURE_OFFSET) -#define PROXIMITY_OFFSET 5 -#define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET) -#define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET) -#define SCAN_MODE_OFFSET 6 -#define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET) -#define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET) -#define REPORT_RATE_OFFSET 7 -#define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET) -#define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET) - -#define MCS5000_TS_SENS_CTL 0x02 -#define MCS5000_TS_FILTER_CTL 0x03 -#define PRI_FILTER_OFFSET 0 -#define SEC_FILTER_OFFSET 4 - -#define MCS5000_TS_X_SIZE_UPPER 0x08 -#define MCS5000_TS_X_SIZE_LOWER 0x09 -#define MCS5000_TS_Y_SIZE_UPPER 0x0A -#define MCS5000_TS_Y_SIZE_LOWER 0x0B - -#define MCS5000_TS_INPUT_INFO 0x10 -#define INPUT_TYPE_OFFSET 0 -#define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET) -#define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET) -#define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET) -#define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET) -#define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET) -#define GESTURE_CODE_OFFSET 3 -#define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET) - -#define MCS5000_TS_X_POS_UPPER 0x11 -#define MCS5000_TS_X_POS_LOWER 0x12 -#define MCS5000_TS_Y_POS_UPPER 0x13 -#define MCS5000_TS_Y_POS_LOWER 0x14 -#define MCS5000_TS_Z_POS 0x15 -#define MCS5000_TS_WIDTH 0x16 -#define MCS5000_TS_GESTURE_VAL 0x17 -#define MCS5000_TS_MODULE_REV 0x20 -#define MCS5000_TS_FIRMWARE_VER 0x21 - -/* Touchscreen absolute values */ -#define MCS5000_MAX_XC 0x3ff -#define MCS5000_MAX_YC 0x3ff - -enum mcs5000_ts_read_offset { - READ_INPUT_INFO, - READ_X_POS_UPPER, - READ_X_POS_LOWER, - READ_Y_POS_UPPER, - READ_Y_POS_LOWER, - READ_BLOCK_SIZE, -}; - -/* Each client has this additional data */ -struct mcs5000_ts_data { - struct i2c_client *client; - struct input_dev *input_dev; - const struct mcs_platform_data *platform_data; -}; - -static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id) -{ - struct mcs5000_ts_data *data = dev_id; - struct i2c_client *client = data->client; - u8 buffer[READ_BLOCK_SIZE]; - int err; - int x; - int y; - - err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO, - READ_BLOCK_SIZE, buffer); - if (err < 0) { - dev_err(&client->dev, "%s, err[%d]\n", __func__, err); - goto out; - } - - switch (buffer[READ_INPUT_INFO]) { - case INPUT_TYPE_NONTOUCH: - input_report_key(data->input_dev, BTN_TOUCH, 0); - input_sync(data->input_dev); - break; - - case INPUT_TYPE_SINGLE: - x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER]; - y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER]; - - input_report_key(data->input_dev, BTN_TOUCH, 1); - input_report_abs(data->input_dev, ABS_X, x); - input_report_abs(data->input_dev, ABS_Y, y); - input_sync(data->input_dev); - break; - - case INPUT_TYPE_DUAL: - /* TODO */ - break; - - case INPUT_TYPE_PALM: - /* TODO */ - break; - - case INPUT_TYPE_PROXIMITY: - /* TODO */ - break; - - default: - dev_err(&client->dev, "Unknown ts input type %d\n", - buffer[READ_INPUT_INFO]); - break; - } - - out: - return IRQ_HANDLED; -} - -static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data, - const struct mcs_platform_data *platform_data) -{ - struct i2c_client *client = data->client; - - /* Touch reset & sleep mode */ - i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, - RESET_EXT_SOFT | OP_MODE_SLEEP); - - /* Touch size */ - i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER, - platform_data->x_size >> 8); - i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER, - platform_data->x_size & 0xff); - i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER, - platform_data->y_size >> 8); - i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER, - platform_data->y_size & 0xff); - - /* Touch active mode & 80 report rate */ - i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE, - OP_MODE_ACTIVE | REPORT_RATE_80); -} - -static int mcs5000_ts_probe(struct i2c_client *client) -{ - const struct mcs_platform_data *pdata; - struct mcs5000_ts_data *data; - struct input_dev *input_dev; - int error; - - pdata = dev_get_platdata(&client->dev); - if (!pdata) - return -EINVAL; - - data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); - if (!data) { - dev_err(&client->dev, "Failed to allocate memory\n"); - return -ENOMEM; - } - - data->client = client; - - input_dev = devm_input_allocate_device(&client->dev); - if (!input_dev) { - dev_err(&client->dev, "Failed to allocate input device\n"); - return -ENOMEM; - } - - input_dev->name = "MELFAS MCS-5000 Touchscreen"; - input_dev->id.bustype = BUS_I2C; - input_dev->dev.parent = &client->dev; - - __set_bit(EV_ABS, input_dev->evbit); - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(BTN_TOUCH, input_dev->keybit); - input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0); - - data->input_dev = input_dev; - - if (pdata->cfg_pin) - pdata->cfg_pin(); - - error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, mcs5000_ts_interrupt, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "mcs5000_ts", data); - if (error) { - dev_err(&client->dev, "Failed to register interrupt\n"); - return error; - } - - error = input_register_device(data->input_dev); - if (error) { - dev_err(&client->dev, "Failed to register input device\n"); - return error; - } - - mcs5000_ts_phys_init(data, pdata); - i2c_set_clientdata(client, data); - - return 0; -} - -static int mcs5000_ts_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - - /* Touch sleep mode */ - i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP); - - return 0; -} - -static int mcs5000_ts_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct mcs5000_ts_data *data = i2c_get_clientdata(client); - const struct mcs_platform_data *pdata = dev_get_platdata(dev); - - mcs5000_ts_phys_init(data, pdata); - - return 0; -} - -static DEFINE_SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, - mcs5000_ts_suspend, mcs5000_ts_resume); - -static const struct i2c_device_id mcs5000_ts_id[] = { - { "mcs5000_ts" }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id); - -static struct i2c_driver mcs5000_ts_driver = { - .probe = mcs5000_ts_probe, - .driver = { - .name = "mcs5000_ts", - .pm = pm_sleep_ptr(&mcs5000_ts_pm), - }, - .id_table = mcs5000_ts_id, -}; - -module_i2c_driver(mcs5000_ts_driver); - -/* Module information */ -MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); -MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller"); -MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/tsc2004.c b/drivers/input/touchscreen/tsc2004.c index b673098535ad..787f2caf4f73 100644 --- a/drivers/input/touchscreen/tsc2004.c +++ b/drivers/input/touchscreen/tsc2004.c @@ -42,11 +42,6 @@ static int tsc2004_probe(struct i2c_client *i2c) tsc2004_cmd); } -static void tsc2004_remove(struct i2c_client *i2c) -{ - tsc200x_remove(&i2c->dev); -} - static const struct i2c_device_id tsc2004_idtable[] = { { "tsc2004" }, { } @@ -70,7 +65,6 @@ static struct i2c_driver tsc2004_driver = { }, .id_table = tsc2004_idtable, .probe = tsc2004_probe, - .remove = tsc2004_remove, }; module_i2c_driver(tsc2004_driver); diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index 1b40ce0ca1b9..6fe8b41b3ecc 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -64,11 +64,6 @@ static int tsc2005_probe(struct spi_device *spi) tsc2005_cmd); } -static void tsc2005_remove(struct spi_device *spi) -{ - tsc200x_remove(&spi->dev); -} - #ifdef CONFIG_OF static const struct of_device_id tsc2005_of_match[] = { { .compatible = "ti,tsc2005" }, @@ -85,7 +80,6 @@ static struct spi_driver tsc2005_driver = { .pm = pm_sleep_ptr(&tsc200x_pm_ops), }, .probe = tsc2005_probe, - .remove = tsc2005_remove, }; module_spi_driver(tsc2005_driver); diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c index a4c0e9db9bb9..df39dee13e1c 100644 --- a/drivers/input/touchscreen/tsc200x-core.c +++ b/drivers/input/touchscreen/tsc200x-core.c @@ -104,11 +104,11 @@ struct tsc200x { bool pen_down; - struct regulator *vio; - struct gpio_desc *reset_gpio; int (*tsc200x_cmd)(struct device *dev, u8 cmd); + int irq; + bool wake_irq_enabled; }; static void tsc200x_update_pen_state(struct tsc200x *ts, @@ -136,7 +136,6 @@ static void tsc200x_update_pen_state(struct tsc200x *ts, static irqreturn_t tsc200x_irq_thread(int irq, void *_ts) { struct tsc200x *ts = _ts; - unsigned long flags; unsigned int pressure; struct tsc200x_data tsdata; int error; @@ -182,13 +181,11 @@ static irqreturn_t tsc200x_irq_thread(int irq, void *_ts) if (unlikely(pressure > MAX_12BIT)) goto out; - spin_lock_irqsave(&ts->lock, flags); - - tsc200x_update_pen_state(ts, tsdata.x, tsdata.y, pressure); - mod_timer(&ts->penup_timer, - jiffies + msecs_to_jiffies(TSC200X_PENUP_TIME_MS)); - - spin_unlock_irqrestore(&ts->lock, flags); + scoped_guard(spinlock_irqsave, &ts->lock) { + tsc200x_update_pen_state(ts, tsdata.x, tsdata.y, pressure); + mod_timer(&ts->penup_timer, + jiffies + msecs_to_jiffies(TSC200X_PENUP_TIME_MS)); + } ts->last_valid_interrupt = jiffies; out: @@ -198,11 +195,9 @@ out: static void tsc200x_penup_timer(struct timer_list *t) { struct tsc200x *ts = from_timer(ts, t, penup_timer); - unsigned long flags; - spin_lock_irqsave(&ts->lock, flags); + guard(spinlock_irqsave)(&ts->lock); tsc200x_update_pen_state(ts, 0, 0, 0); - spin_unlock_irqrestore(&ts->lock, flags); } static void tsc200x_start_scan(struct tsc200x *ts) @@ -232,12 +227,10 @@ static void __tsc200x_disable(struct tsc200x *ts) { tsc200x_stop_scan(ts); - disable_irq(ts->irq); - del_timer_sync(&ts->penup_timer); + guard(disable_irq)(&ts->irq); + del_timer_sync(&ts->penup_timer); cancel_delayed_work_sync(&ts->esd_work); - - enable_irq(ts->irq); } /* must be called with ts->mutex held */ @@ -253,80 +246,79 @@ static void __tsc200x_enable(struct tsc200x *ts) } } -static ssize_t tsc200x_selftest_show(struct device *dev, - struct device_attribute *attr, - char *buf) +/* + * Test TSC200X communications via temp high register. + */ +static int tsc200x_do_selftest(struct tsc200x *ts) { - struct tsc200x *ts = dev_get_drvdata(dev); - unsigned int temp_high; unsigned int temp_high_orig; unsigned int temp_high_test; - bool success = true; + unsigned int temp_high; int error; - mutex_lock(&ts->mutex); - - /* - * Test TSC200X communications via temp high register. - */ - __tsc200x_disable(ts); - error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high_orig); if (error) { - dev_warn(dev, "selftest failed: read error %d\n", error); - success = false; - goto out; + dev_warn(ts->dev, "selftest failed: read error %d\n", error); + return error; } temp_high_test = (temp_high_orig - 1) & MAX_12BIT; error = regmap_write(ts->regmap, TSC200X_REG_TEMP_HIGH, temp_high_test); if (error) { - dev_warn(dev, "selftest failed: write error %d\n", error); - success = false; - goto out; + dev_warn(ts->dev, "selftest failed: write error %d\n", error); + return error; } error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high); if (error) { - dev_warn(dev, "selftest failed: read error %d after write\n", - error); - success = false; - goto out; - } - - if (temp_high != temp_high_test) { - dev_warn(dev, "selftest failed: %d != %d\n", - temp_high, temp_high_test); - success = false; + dev_warn(ts->dev, + "selftest failed: read error %d after write\n", error); + return error; } /* hardware reset */ tsc200x_reset(ts); - if (!success) - goto out; + if (temp_high != temp_high_test) { + dev_warn(ts->dev, "selftest failed: %d != %d\n", + temp_high, temp_high_test); + return -EINVAL; + } /* test that the reset really happened */ error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high); if (error) { - dev_warn(dev, "selftest failed: read error %d after reset\n", - error); - success = false; - goto out; + dev_warn(ts->dev, + "selftest failed: read error %d after reset\n", error); + return error; } if (temp_high != temp_high_orig) { - dev_warn(dev, "selftest failed after reset: %d != %d\n", + dev_warn(ts->dev, "selftest failed after reset: %d != %d\n", temp_high, temp_high_orig); - success = false; + return -EINVAL; } -out: - __tsc200x_enable(ts); - mutex_unlock(&ts->mutex); + return 0; +} - return sprintf(buf, "%d\n", success); +static ssize_t tsc200x_selftest_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct tsc200x *ts = dev_get_drvdata(dev); + int error; + + scoped_guard(mutex, &ts->mutex) { + __tsc200x_disable(ts); + + error = tsc200x_do_selftest(ts); + + __tsc200x_enable(ts); + } + + return sprintf(buf, "%d\n", !error); } static DEVICE_ATTR(selftest, S_IRUGO, tsc200x_selftest_show, NULL); @@ -368,46 +360,42 @@ static void tsc200x_esd_work(struct work_struct *work) int error; unsigned int r; - if (!mutex_trylock(&ts->mutex)) { - /* - * If the mutex is taken, it means that disable or enable is in - * progress. In that case just reschedule the work. If the work - * is not needed, it will be canceled by disable. - */ - goto reschedule; - } - - if (time_is_after_jiffies(ts->last_valid_interrupt + - msecs_to_jiffies(ts->esd_timeout))) - goto out; - - /* We should be able to read register without disabling interrupts. */ - error = regmap_read(ts->regmap, TSC200X_REG_CFR0, &r); - if (!error && - !((r ^ TSC200X_CFR0_INITVALUE) & TSC200X_CFR0_RW_MASK)) { - goto out; - } - /* - * If we could not read our known value from configuration register 0 - * then we should reset the controller as if from power-up and start - * scanning again. + * If the mutex is taken, it means that disable or enable is in + * progress. In that case just reschedule the work. If the work + * is not needed, it will be canceled by disable. */ - dev_info(ts->dev, "TSC200X not responding - resetting\n"); + scoped_guard(mutex_try, &ts->mutex) { + if (time_is_after_jiffies(ts->last_valid_interrupt + + msecs_to_jiffies(ts->esd_timeout))) + break; - disable_irq(ts->irq); - del_timer_sync(&ts->penup_timer); + /* + * We should be able to read register without disabling + * interrupts. + */ + error = regmap_read(ts->regmap, TSC200X_REG_CFR0, &r); + if (!error && + !((r ^ TSC200X_CFR0_INITVALUE) & TSC200X_CFR0_RW_MASK)) { + break; + } - tsc200x_update_pen_state(ts, 0, 0, 0); + /* + * If we could not read our known value from configuration + * register 0 then we should reset the controller as if from + * power-up and start scanning again. + */ + dev_info(ts->dev, "TSC200X not responding - resetting\n"); - tsc200x_reset(ts); + scoped_guard(disable_irq, &ts->irq) { + del_timer_sync(&ts->penup_timer); + tsc200x_update_pen_state(ts, 0, 0, 0); + tsc200x_reset(ts); + } - enable_irq(ts->irq); - tsc200x_start_scan(ts); + tsc200x_start_scan(ts); + } -out: - mutex_unlock(&ts->mutex); -reschedule: /* re-arm the watchdog */ schedule_delayed_work(&ts->esd_work, round_jiffies_relative( @@ -418,15 +406,13 @@ static int tsc200x_open(struct input_dev *input) { struct tsc200x *ts = input_get_drvdata(input); - mutex_lock(&ts->mutex); + guard(mutex)(&ts->mutex); if (!ts->suspended) __tsc200x_enable(ts); ts->opened = true; - mutex_unlock(&ts->mutex); - return 0; } @@ -434,14 +420,12 @@ static void tsc200x_close(struct input_dev *input) { struct tsc200x *ts = input_get_drvdata(input); - mutex_lock(&ts->mutex); + guard(mutex)(&ts->mutex); if (!ts->suspended) __tsc200x_disable(ts); ts->opened = false; - - mutex_unlock(&ts->mutex); } int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, @@ -488,20 +472,6 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, &esd_timeout); ts->esd_timeout = error ? 0 : esd_timeout; - ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(ts->reset_gpio)) { - error = PTR_ERR(ts->reset_gpio); - dev_err(dev, "error acquiring reset gpio: %d\n", error); - return error; - } - - ts->vio = devm_regulator_get(dev, "vio"); - if (IS_ERR(ts->vio)) { - error = PTR_ERR(ts->vio); - dev_err(dev, "error acquiring vio regulator: %d", error); - return error; - } - mutex_init(&ts->mutex); spin_lock_init(&ts->lock); @@ -542,60 +512,60 @@ int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, touchscreen_parse_properties(input_dev, false, &ts->prop); + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + error = PTR_ERR_OR_ZERO(ts->reset_gpio); + if (error) { + dev_err(dev, "error acquiring reset gpio: %d\n", error); + return error; + } + + error = devm_regulator_get_enable(dev, "vio"); + if (error) { + dev_err(dev, "error acquiring vio regulator: %d\n", error); + return error; + } + + tsc200x_reset(ts); + /* Ensure the touchscreen is off */ tsc200x_stop_scan(ts); - error = devm_request_threaded_irq(dev, irq, NULL, - tsc200x_irq_thread, - IRQF_TRIGGER_RISING | IRQF_ONESHOT, - "tsc200x", ts); + error = devm_request_threaded_irq(dev, irq, NULL, tsc200x_irq_thread, + IRQF_ONESHOT, "tsc200x", ts); if (error) { dev_err(dev, "Failed to request irq, err: %d\n", error); return error; } - error = regulator_enable(ts->vio); - if (error) - return error; - dev_set_drvdata(dev, ts); error = input_register_device(ts->idev); if (error) { dev_err(dev, "Failed to register input device, err: %d\n", error); - goto disable_regulator; + return error; } - irq_set_irq_wake(irq, 1); - return 0; + device_init_wakeup(dev, + device_property_read_bool(dev, "wakeup-source")); -disable_regulator: - regulator_disable(ts->vio); - return error; + return 0; } EXPORT_SYMBOL_GPL(tsc200x_probe); -void tsc200x_remove(struct device *dev) -{ - struct tsc200x *ts = dev_get_drvdata(dev); - - regulator_disable(ts->vio); -} -EXPORT_SYMBOL_GPL(tsc200x_remove); - static int tsc200x_suspend(struct device *dev) { struct tsc200x *ts = dev_get_drvdata(dev); - mutex_lock(&ts->mutex); + guard(mutex)(&ts->mutex); if (!ts->suspended && ts->opened) __tsc200x_disable(ts); ts->suspended = true; - mutex_unlock(&ts->mutex); + if (device_may_wakeup(dev)) + ts->wake_irq_enabled = enable_irq_wake(ts->irq) == 0; return 0; } @@ -604,15 +574,18 @@ static int tsc200x_resume(struct device *dev) { struct tsc200x *ts = dev_get_drvdata(dev); - mutex_lock(&ts->mutex); + guard(mutex)(&ts->mutex); + + if (ts->wake_irq_enabled) { + disable_irq_wake(ts->irq); + ts->wake_irq_enabled = false; + } if (ts->suspended && ts->opened) __tsc200x_enable(ts); ts->suspended = false; - mutex_unlock(&ts->mutex); - return 0; } diff --git a/drivers/input/touchscreen/tsc200x-core.h b/drivers/input/touchscreen/tsc200x-core.h index 37de91efd78e..e76ba7a889dd 100644 --- a/drivers/input/touchscreen/tsc200x-core.h +++ b/drivers/input/touchscreen/tsc200x-core.h @@ -75,6 +75,5 @@ extern const struct attribute_group *tsc200x_groups[]; int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id, struct regmap *regmap, int (*tsc200x_cmd)(struct device *dev, u8 cmd)); -void tsc200x_remove(struct device *dev); #endif diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index dd6b12c6dc58..7567efabe014 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -68,8 +68,6 @@ struct usbtouch_device_info { */ bool irq_always; - void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); - /* * used to get the packet len. possible return values: * > 0: packet len @@ -94,7 +92,7 @@ struct usbtouch_usb { struct urb *irq; struct usb_interface *interface; struct input_dev *input; - struct usbtouch_device_info *type; + const struct usbtouch_device_info *type; struct mutex pm_mutex; /* serialize access to open/suspend */ bool is_open; char name[128]; @@ -103,141 +101,8 @@ struct usbtouch_usb { int x, y; int touch, press; -}; - - -/* device types */ -enum { - DEVTYPE_IGNORE = -1, - DEVTYPE_EGALAX, - DEVTYPE_PANJIT, - DEVTYPE_3M, - DEVTYPE_ITM, - DEVTYPE_ETURBO, - DEVTYPE_GUNZE, - DEVTYPE_DMC_TSC10, - DEVTYPE_IRTOUCH, - DEVTYPE_IRTOUCH_HIRES, - DEVTYPE_IDEALTEK, - DEVTYPE_GENERAL_TOUCH, - DEVTYPE_GOTOP, - DEVTYPE_JASTEC, - DEVTYPE_E2I, - DEVTYPE_ZYTRONIC, - DEVTYPE_TC45USB, - DEVTYPE_NEXIO, - DEVTYPE_ELO, - DEVTYPE_ETOUCH, -}; - -#define USB_DEVICE_HID_CLASS(vend, prod) \ - .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \ - | USB_DEVICE_ID_MATCH_DEVICE, \ - .idVendor = (vend), \ - .idProduct = (prod), \ - .bInterfaceClass = USB_INTERFACE_CLASS_HID - -static const struct usb_device_id usbtouch_devices[] = { -#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX - /* ignore the HID capable devices, handled by usbhid */ - {USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE}, - {USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE}, - - /* normal device IDs */ - {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX}, - {USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT - {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT}, - {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT}, - {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT}, - {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_3M - {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ITM - {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM}, - {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO - {USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE - {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 - {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH - {USB_DEVICE(0x255e, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, - {USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, - {USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, - {USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK - {USB_DEVICE(0x1391, 0x1000), .driver_info = DEVTYPE_IDEALTEK}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH - {USB_DEVICE(0x0dfc, 0x0001), .driver_info = DEVTYPE_GENERAL_TOUCH}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP - {USB_DEVICE(0x08f2, 0x007f), .driver_info = DEVTYPE_GOTOP}, - {USB_DEVICE(0x08f2, 0x00ce), .driver_info = DEVTYPE_GOTOP}, - {USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC - {USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_E2I - {USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC - {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB - /* TC5UH */ - {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB}, - /* TC4UM */ - {USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO - /* data interface only */ - {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00), - .driver_info = DEVTYPE_NEXIO}, - {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00), - .driver_info = DEVTYPE_NEXIO}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ELO - {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO}, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH - {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH}, -#endif - {} + void (*process_pkt)(struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); }; @@ -273,6 +138,16 @@ static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info e2i_dev_info = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 6, + .init = e2i_init, + .read_data = e2i_read_data, +}; #endif @@ -292,9 +167,8 @@ static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) static int egalax_init(struct usbtouch_usb *usbtouch) { - int ret, i; - unsigned char *buf; struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + int ret, i; /* * An eGalax diagnostic packet kicks the device into using the right @@ -302,7 +176,7 @@ static int egalax_init(struct usbtouch_usb *usbtouch) * read later and ignored. */ - buf = kmalloc(3, GFP_KERNEL); + u8 *buf __free(kfree) = kmalloc(3, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -316,17 +190,11 @@ static int egalax_init(struct usbtouch_usb *usbtouch) USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, 0, buf, 3, USB_CTRL_SET_TIMEOUT); - if (ret >= 0) { - ret = 0; - break; - } if (ret != -EPIPE) break; } - kfree(buf); - - return ret; + return ret < 0 ? ret : 0; } static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) @@ -356,6 +224,17 @@ static int egalax_get_pkt_len(unsigned char *buf, int len) return 0; } + +static const struct usbtouch_device_info egalax_dev_info = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .get_pkt_len = egalax_get_pkt_len, + .read_data = egalax_read_data, + .init = egalax_init, +}; #endif /***************************************************************************** @@ -402,6 +281,16 @@ static int etouch_get_pkt_len(unsigned char *buf, int len) return 0; } + +static const struct usbtouch_device_info etouch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .get_pkt_len = etouch_get_pkt_len, + .read_data = etouch_read_data, +}; #endif /***************************************************************************** @@ -416,6 +305,15 @@ static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info panjit_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = panjit_read_data, +}; #endif @@ -449,35 +347,13 @@ struct mtouch_priv { u8 fw_rev_minor; }; -static ssize_t mtouch_firmware_rev_show(struct device *dev, - struct device_attribute *attr, char *output) -{ - struct usb_interface *intf = to_usb_interface(dev); - struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); - struct mtouch_priv *priv = usbtouch->priv; - - return sysfs_emit(output, "%1x.%1x\n", - priv->fw_rev_major, priv->fw_rev_minor); -} -static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL); - -static struct attribute *mtouch_attrs[] = { - &dev_attr_firmware_rev.attr, - NULL -}; - -static const struct attribute_group mtouch_attr_group = { - .attrs = mtouch_attrs, -}; - static int mtouch_get_fw_revision(struct usbtouch_usb *usbtouch) { struct usb_device *udev = interface_to_usbdev(usbtouch->interface); struct mtouch_priv *priv = usbtouch->priv; - u8 *buf; int ret; - buf = kzalloc(MTOUCHUSB_REQ_CTRLLR_ID_LEN, GFP_NOIO); + u8 *buf __free(kfree) = kzalloc(MTOUCHUSB_REQ_CTRLLR_ID_LEN, GFP_NOIO); if (!buf) return -ENOMEM; @@ -489,38 +365,24 @@ static int mtouch_get_fw_revision(struct usbtouch_usb *usbtouch) if (ret != MTOUCHUSB_REQ_CTRLLR_ID_LEN) { dev_warn(&usbtouch->interface->dev, "Failed to read FW rev: %d\n", ret); - ret = ret < 0 ? ret : -EIO; - goto free; + return ret < 0 ? ret : -EIO; } priv->fw_rev_major = buf[3]; priv->fw_rev_minor = buf[4]; - ret = 0; - -free: - kfree(buf); - return ret; + return 0; } static int mtouch_alloc(struct usbtouch_usb *usbtouch) { struct mtouch_priv *priv; - int ret; priv = kmalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; usbtouch->priv = priv; - ret = sysfs_create_group(&usbtouch->interface->dev.kobj, - &mtouch_attr_group); - if (ret) { - kfree(usbtouch->priv); - usbtouch->priv = NULL; - return ret; - } - return 0; } @@ -571,9 +433,53 @@ static void mtouch_exit(struct usbtouch_usb *usbtouch) { struct mtouch_priv *priv = usbtouch->priv; - sysfs_remove_group(&usbtouch->interface->dev.kobj, &mtouch_attr_group); kfree(priv); } + +static struct usbtouch_device_info mtouch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x4000, + .min_yc = 0x0, + .max_yc = 0x4000, + .rept_size = 11, + .read_data = mtouch_read_data, + .alloc = mtouch_alloc, + .init = mtouch_init, + .exit = mtouch_exit, +}; + +static ssize_t mtouch_firmware_rev_show(struct device *dev, + struct device_attribute *attr, char *output) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct mtouch_priv *priv = usbtouch->priv; + + return sysfs_emit(output, "%1x.%1x\n", + priv->fw_rev_major, priv->fw_rev_minor); +} +static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL); + +static struct attribute *mtouch_attrs[] = { + &dev_attr_firmware_rev.attr, + NULL +}; + +static bool mtouch_group_visible(struct kobject *kobj) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_interface *intf = to_usb_interface(dev); + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + return usbtouch->type == &mtouch_dev_info; +} + +DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(mtouch); + +static const struct attribute_group mtouch_attr_group = { + .is_visible = SYSFS_GROUP_VISIBLE(mtouch), + .attrs = mtouch_attrs, +}; #endif @@ -608,6 +514,16 @@ static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info itm_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = itm_read_data, +}; #endif @@ -642,6 +558,16 @@ static int eturbo_get_pkt_len(unsigned char *buf, int len) return 3; return 0; } + +static const struct usbtouch_device_info eturbo_dev_info = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 8, + .get_pkt_len = eturbo_get_pkt_len, + .read_data = eturbo_read_data, +}; #endif @@ -660,6 +586,15 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info gunze_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = gunze_read_data, +}; #endif /***************************************************************************** @@ -688,24 +623,23 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) { struct usb_device *dev = interface_to_usbdev(usbtouch->interface); - int ret = -ENOMEM; - unsigned char *buf; + int ret; - buf = kmalloc(2, GFP_NOIO); + u8 *buf __free(kfree) = kmalloc(2, GFP_NOIO); if (!buf) - goto err_nobuf; + return -ENOMEM; + /* reset */ buf[0] = buf[1] = 0xFF; ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), - TSC10_CMD_RESET, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + TSC10_CMD_RESET, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); if (ret < 0) - goto err_out; - if (buf[0] != 0x06) { - ret = -ENODEV; - goto err_out; - } + return ret; + + if (buf[0] != 0x06) + return -ENODEV; /* TSC-25 data sheet specifies a delay after the RESET command */ msleep(150); @@ -713,28 +647,22 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) /* set coordinate output rate */ buf[0] = buf[1] = 0xFF; ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), - TSC10_CMD_RATE, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + TSC10_CMD_RATE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); if (ret < 0) - goto err_out; - if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) { - ret = -ENODEV; - goto err_out; - } + return ret; + + if (buf[0] != 0x06 && (buf[0] != 0x15 || buf[1] != 0x01)) + return -ENODEV; /* start sending data */ - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), - TSC10_CMD_DATA1, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); -err_out: - kfree(buf); -err_nobuf: - return ret; + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + TSC10_CMD_DATA1, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); } - static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; @@ -743,6 +671,16 @@ static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info dmc_tsc10_dev_info = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .init = dmc_tsc10_init, + .read_data = dmc_tsc10_read_data, +}; #endif @@ -758,6 +696,24 @@ static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info irtouch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = irtouch_read_data, +}; + +static const struct usbtouch_device_info irtouch_hires_dev_info = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 8, + .read_data = irtouch_read_data, +}; #endif /***************************************************************************** @@ -772,6 +728,15 @@ static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info tc45usb_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 5, + .read_data = tc45usb_read_data, +}; #endif /***************************************************************************** @@ -811,6 +776,16 @@ static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 0; } } + +static const struct usbtouch_device_info idealtek_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .get_pkt_len = idealtek_get_pkt_len, + .read_data = idealtek_read_data, +}; #endif /***************************************************************************** @@ -826,6 +801,15 @@ static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info general_touch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 7, + .read_data = general_touch_read_data, +}; #endif /***************************************************************************** @@ -840,6 +824,15 @@ static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info gotop_dev_info = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 4, + .read_data = gotop_read_data, +}; #endif /***************************************************************************** @@ -854,6 +847,15 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } + +static const struct usbtouch_device_info jastec_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = jastec_read_data, +}; #endif /***************************************************************************** @@ -890,6 +892,16 @@ static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 0; } + +static const struct usbtouch_device_info zytronic_dev_info = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .read_data = zytronic_read_data, + .irq_always = true, +}; #endif /***************************************************************************** @@ -960,7 +972,6 @@ static int nexio_init(struct usbtouch_usb *usbtouch) struct nexio_priv *priv = usbtouch->priv; int ret = -ENOMEM; int actual_len, i; - unsigned char *buf; char *firmware_ver = NULL, *device_name = NULL; int input_ep = 0, output_ep = 0; @@ -976,9 +987,9 @@ static int nexio_init(struct usbtouch_usb *usbtouch) if (!input_ep || !output_ep) return -ENXIO; - buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO); + u8 *buf __free(kfree) = kmalloc(NEXIO_BUFSIZE, GFP_NOIO); if (!buf) - goto out_buf; + return -ENOMEM; /* two empty reads */ for (i = 0; i < 2; i++) { @@ -986,7 +997,7 @@ static int nexio_init(struct usbtouch_usb *usbtouch) buf, NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT); if (ret < 0) - goto out_buf; + return ret; } /* send init command */ @@ -995,7 +1006,7 @@ static int nexio_init(struct usbtouch_usb *usbtouch) buf, sizeof(nexio_init_pkt), &actual_len, NEXIO_TIMEOUT); if (ret < 0) - goto out_buf; + return ret; /* read replies */ for (i = 0; i < 3; i++) { @@ -1026,11 +1037,8 @@ static int nexio_init(struct usbtouch_usb *usbtouch) usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), priv->ack_buf, sizeof(nexio_ack_pkt), nexio_ack_complete, usbtouch); - ret = 0; -out_buf: - kfree(buf); - return ret; + return 0; } static void nexio_exit(struct usbtouch_usb *usbtouch) @@ -1067,13 +1075,11 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) if (ret) dev_warn(dev, "Failed to submit ACK URB: %d\n", ret); - if (!usbtouch->type->max_xc) { - usbtouch->type->max_xc = 2 * x_len; + if (!input_abs_get_max(usbtouch->input, ABS_X)) { input_set_abs_params(usbtouch->input, ABS_X, - 0, usbtouch->type->max_xc, 0, 0); - usbtouch->type->max_yc = 2 * y_len; + 0, 2 * x_len, 0, 0); input_set_abs_params(usbtouch->input, ABS_Y, - 0, usbtouch->type->max_yc, 0, 0); + 0, 2 * y_len, 0, 0); } /* * The device reports state of IR sensors on X and Y axes. @@ -1128,6 +1134,15 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) } return 0; } + +static const struct usbtouch_device_info nexio_dev_info = { + .rept_size = 1024, + .irq_always = true, + .read_data = nexio_read_data, + .alloc = nexio_alloc, + .init = nexio_init, + .exit = nexio_exit, +}; #endif @@ -1146,241 +1161,17 @@ static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) return 1; } -#endif - - -/***************************************************************************** - * the different device descriptors - */ -#ifdef MULTI_PACKET -static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, - unsigned char *pkt, int len); -#endif - -static struct usbtouch_device_info usbtouch_dev_info[] = { -#ifdef CONFIG_TOUCHSCREEN_USB_ELO - [DEVTYPE_ELO] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .max_press = 0xff, - .rept_size = 8, - .read_data = elo_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX - [DEVTYPE_EGALAX] = { - .min_xc = 0x0, - .max_xc = 0x07ff, - .min_yc = 0x0, - .max_yc = 0x07ff, - .rept_size = 16, - .process_pkt = usbtouch_process_multi, - .get_pkt_len = egalax_get_pkt_len, - .read_data = egalax_read_data, - .init = egalax_init, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT - [DEVTYPE_PANJIT] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 8, - .read_data = panjit_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_3M - [DEVTYPE_3M] = { - .min_xc = 0x0, - .max_xc = 0x4000, - .min_yc = 0x0, - .max_yc = 0x4000, - .rept_size = 11, - .read_data = mtouch_read_data, - .alloc = mtouch_alloc, - .init = mtouch_init, - .exit = mtouch_exit, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ITM - [DEVTYPE_ITM] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .max_press = 0xff, - .rept_size = 8, - .read_data = itm_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO - [DEVTYPE_ETURBO] = { - .min_xc = 0x0, - .max_xc = 0x07ff, - .min_yc = 0x0, - .max_yc = 0x07ff, - .rept_size = 8, - .process_pkt = usbtouch_process_multi, - .get_pkt_len = eturbo_get_pkt_len, - .read_data = eturbo_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE - [DEVTYPE_GUNZE] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 4, - .read_data = gunze_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 - [DEVTYPE_DMC_TSC10] = { - .min_xc = 0x0, - .max_xc = 0x03ff, - .min_yc = 0x0, - .max_yc = 0x03ff, - .rept_size = 5, - .init = dmc_tsc10_init, - .read_data = dmc_tsc10_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH - [DEVTYPE_IRTOUCH] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 8, - .read_data = irtouch_read_data, - }, - - [DEVTYPE_IRTOUCH_HIRES] = { - .min_xc = 0x0, - .max_xc = 0x7fff, - .min_yc = 0x0, - .max_yc = 0x7fff, - .rept_size = 8, - .read_data = irtouch_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK - [DEVTYPE_IDEALTEK] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 8, - .process_pkt = usbtouch_process_multi, - .get_pkt_len = idealtek_get_pkt_len, - .read_data = idealtek_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH - [DEVTYPE_GENERAL_TOUCH] = { - .min_xc = 0x0, - .max_xc = 0x7fff, - .min_yc = 0x0, - .max_yc = 0x7fff, - .rept_size = 7, - .read_data = general_touch_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP - [DEVTYPE_GOTOP] = { - .min_xc = 0x0, - .max_xc = 0x03ff, - .min_yc = 0x0, - .max_yc = 0x03ff, - .rept_size = 4, - .read_data = gotop_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC - [DEVTYPE_JASTEC] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 4, - .read_data = jastec_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_E2I - [DEVTYPE_E2I] = { - .min_xc = 0x0, - .max_xc = 0x7fff, - .min_yc = 0x0, - .max_yc = 0x7fff, - .rept_size = 6, - .init = e2i_init, - .read_data = e2i_read_data, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC - [DEVTYPE_ZYTRONIC] = { - .min_xc = 0x0, - .max_xc = 0x03ff, - .min_yc = 0x0, - .max_yc = 0x03ff, - .rept_size = 5, - .read_data = zytronic_read_data, - .irq_always = true, - }, -#endif - -#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB - [DEVTYPE_TC45USB] = { - .min_xc = 0x0, - .max_xc = 0x0fff, - .min_yc = 0x0, - .max_yc = 0x0fff, - .rept_size = 5, - .read_data = tc45usb_read_data, - }, -#endif -#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO - [DEVTYPE_NEXIO] = { - .rept_size = 1024, - .irq_always = true, - .read_data = nexio_read_data, - .alloc = nexio_alloc, - .init = nexio_init, - .exit = nexio_exit, - }, -#endif -#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH - [DEVTYPE_ETOUCH] = { - .min_xc = 0x0, - .max_xc = 0x07ff, - .min_yc = 0x0, - .max_yc = 0x07ff, - .rept_size = 16, - .process_pkt = usbtouch_process_multi, - .get_pkt_len = etouch_get_pkt_len, - .read_data = etouch_read_data, - }, -#endif +static const struct usbtouch_device_info elo_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = elo_read_data, }; +#endif /***************************************************************************** @@ -1389,10 +1180,10 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, unsigned char *pkt, int len) { - struct usbtouch_device_info *type = usbtouch->type; + const struct usbtouch_device_info *type = usbtouch->type; if (!type->read_data(usbtouch, pkt)) - return; + return; input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); @@ -1485,9 +1276,15 @@ out_flush_buf: usbtouch->buf_len = 0; return; } +#else +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + dev_WARN_ONCE(&usbtouch->interface->dev, 1, + "Protocol has ->get_pkt_len() without #define MULTI_PACKET"); +} #endif - static void usbtouch_irq(struct urb *urb) { struct usbtouch_usb *usbtouch = urb->context; @@ -1518,7 +1315,7 @@ static void usbtouch_irq(struct urb *urb) goto exit; } - usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length); + usbtouch->process_pkt(usbtouch, usbtouch->data, urb->actual_length); exit: usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); @@ -1528,6 +1325,20 @@ exit: __func__, retval); } +static int usbtouch_start_io(struct usbtouch_usb *usbtouch) +{ + guard(mutex)(&usbtouch->pm_mutex); + + if (!usbtouch->type->irq_always) + if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) + return -EIO; + + usbtouch->interface->needs_remote_wakeup = 1; + usbtouch->is_open = true; + + return 0; +} + static int usbtouch_open(struct input_dev *input) { struct usbtouch_usb *usbtouch = input_get_drvdata(input); @@ -1536,23 +1347,12 @@ static int usbtouch_open(struct input_dev *input) usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface); r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0; - if (r < 0) - goto out; - - mutex_lock(&usbtouch->pm_mutex); - if (!usbtouch->type->irq_always) { - if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) { - r = -EIO; - goto out_put; - } - } + if (r) + return r; + + r = usbtouch_start_io(usbtouch); - usbtouch->interface->needs_remote_wakeup = 1; - usbtouch->is_open = true; -out_put: - mutex_unlock(&usbtouch->pm_mutex); usb_autopm_put_interface(usbtouch->interface); -out: return r; } @@ -1561,11 +1361,11 @@ static void usbtouch_close(struct input_dev *input) struct usbtouch_usb *usbtouch = input_get_drvdata(input); int r; - mutex_lock(&usbtouch->pm_mutex); - if (!usbtouch->type->irq_always) - usb_kill_urb(usbtouch->irq); - usbtouch->is_open = false; - mutex_unlock(&usbtouch->pm_mutex); + scoped_guard(mutex, &usbtouch->pm_mutex) { + if (!usbtouch->type->irq_always) + usb_kill_urb(usbtouch->irq); + usbtouch->is_open = false; + } r = usb_autopm_get_interface(usbtouch->interface); usbtouch->interface->needs_remote_wakeup = 0; @@ -1573,8 +1373,7 @@ static void usbtouch_close(struct input_dev *input) usb_autopm_put_interface(usbtouch->interface); } -static int usbtouch_suspend -(struct usb_interface *intf, pm_message_t message) +static int usbtouch_suspend(struct usb_interface *intf, pm_message_t message) { struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); @@ -1586,20 +1385,19 @@ static int usbtouch_suspend static int usbtouch_resume(struct usb_interface *intf) { struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); - int result = 0; - mutex_lock(&usbtouch->pm_mutex); + guard(mutex)(&usbtouch->pm_mutex); + if (usbtouch->is_open || usbtouch->type->irq_always) - result = usb_submit_urb(usbtouch->irq, GFP_NOIO); - mutex_unlock(&usbtouch->pm_mutex); + return usb_submit_urb(usbtouch->irq, GFP_NOIO); - return result; + return 0; } static int usbtouch_reset_resume(struct usb_interface *intf) { struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); - int err = 0; + int err; /* reinit the device */ if (usbtouch->type->init) { @@ -1613,12 +1411,12 @@ static int usbtouch_reset_resume(struct usb_interface *intf) } /* restart IO if needed */ - mutex_lock(&usbtouch->pm_mutex); + guard(mutex)(&usbtouch->pm_mutex); + if (usbtouch->is_open) - err = usb_submit_urb(usbtouch->irq, GFP_NOIO); - mutex_unlock(&usbtouch->pm_mutex); + return usb_submit_urb(usbtouch->irq, GFP_NOIO); - return err; + return 0; } static void usbtouch_free_buffers(struct usb_device *udev, @@ -1648,14 +1446,12 @@ static int usbtouch_probe(struct usb_interface *intf, struct input_dev *input_dev; struct usb_endpoint_descriptor *endpoint; struct usb_device *udev = interface_to_usbdev(intf); - struct usbtouch_device_info *type; + const struct usbtouch_device_info *type; int err = -ENOMEM; /* some devices are ignored */ - if (id->driver_info == DEVTYPE_IGNORE) - return -ENODEV; - - if (id->driver_info >= ARRAY_SIZE(usbtouch_dev_info)) + type = (const struct usbtouch_device_info *)id->driver_info; + if (!type) return -ENODEV; endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting); @@ -1668,11 +1464,7 @@ static int usbtouch_probe(struct usb_interface *intf, goto out_free; mutex_init(&usbtouch->pm_mutex); - - type = &usbtouch_dev_info[id->driver_info]; usbtouch->type = type; - if (!type->process_pkt) - type->process_pkt = usbtouch_process_pkt; usbtouch->data_size = type->rept_size; if (type->get_pkt_len) { @@ -1696,6 +1488,9 @@ static int usbtouch_probe(struct usb_interface *intf, usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL); if (!usbtouch->buffer) goto out_free_buffers; + usbtouch->process_pkt = usbtouch_process_multi; + } else { + usbtouch->process_pkt = usbtouch_process_pkt; } usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); @@ -1842,6 +1637,150 @@ static void usbtouch_disconnect(struct usb_interface *intf) kfree(usbtouch); } +static const struct attribute_group *usbtouch_groups[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_3M + &mtouch_attr_group, +#endif + NULL +}; + +static const struct usb_device_id usbtouch_devices[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX + /* ignore the HID capable devices, handled by usbhid */ + { USB_DEVICE_INTERFACE_CLASS(0x0eef, 0x0001, USB_INTERFACE_CLASS_HID), + .driver_info = 0 }, + { USB_DEVICE_INTERFACE_CLASS(0x0eef, 0x0002, USB_INTERFACE_CLASS_HID), + .driver_info = 0 }, + + /* normal device IDs */ + { USB_DEVICE(0x3823, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x3823, 0x0002), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x0123, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x0eef, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x0eef, 0x0002), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x1234, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x1234, 0x0002), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT + { USB_DEVICE(0x134c, 0x0001), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, + { USB_DEVICE(0x134c, 0x0002), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, + { USB_DEVICE(0x134c, 0x0003), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, + { USB_DEVICE(0x134c, 0x0004), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_3M + { USB_DEVICE(0x0596, 0x0001), + .driver_info = (kernel_ulong_t)&mtouch_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ITM + { USB_DEVICE(0x0403, 0xf9e9), + .driver_info = (kernel_ulong_t)&itm_dev_info }, + { USB_DEVICE(0x16e3, 0xf9e9), + .driver_info = (kernel_ulong_t)&itm_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO + { USB_DEVICE(0x1234, 0x5678), + .driver_info = (kernel_ulong_t)&eturbo_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE + { USB_DEVICE(0x0637, 0x0001), + .driver_info = (kernel_ulong_t)&gunze_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 + { USB_DEVICE(0x0afa, 0x03e8), + .driver_info = (kernel_ulong_t)&dmc_tsc10_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH + { USB_DEVICE(0x255e, 0x0001), + .driver_info = (kernel_ulong_t)&irtouch_dev_info }, + { USB_DEVICE(0x595a, 0x0001), + .driver_info = (kernel_ulong_t)&irtouch_dev_info }, + { USB_DEVICE(0x6615, 0x0001), + .driver_info = (kernel_ulong_t)&irtouch_dev_info }, + { USB_DEVICE(0x6615, 0x0012), + .driver_info = (kernel_ulong_t)&irtouch_hires_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK + { USB_DEVICE(0x1391, 0x1000), + .driver_info = (kernel_ulong_t)&idealtek_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH + { USB_DEVICE(0x0dfc, 0x0001), + .driver_info = (kernel_ulong_t)&general_touch_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP + { USB_DEVICE(0x08f2, 0x007f), + .driver_info = (kernel_ulong_t)&gotop_dev_info }, + { USB_DEVICE(0x08f2, 0x00ce), + .driver_info = (kernel_ulong_t)&gotop_dev_info }, + { USB_DEVICE(0x08f2, 0x00f4), + .driver_info = (kernel_ulong_t)&gotop_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC + { USB_DEVICE(0x0f92, 0x0001), + .driver_info = (kernel_ulong_t)&jastec_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I + { USB_DEVICE(0x1ac7, 0x0001), + .driver_info = (kernel_ulong_t)&e2i_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC + { USB_DEVICE(0x14c8, 0x0003), + .driver_info = (kernel_ulong_t)&zytronic_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + /* TC5UH */ + { USB_DEVICE(0x0664, 0x0309), + .driver_info = (kernel_ulong_t)&tc45usb_dev_info }, + /* TC4UM */ + { USB_DEVICE(0x0664, 0x0306), + .driver_info = (kernel_ulong_t)&tc45usb_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + /* data interface only */ + { USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00), + .driver_info = (kernel_ulong_t)&nexio_dev_info }, + { USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00), + .driver_info = (kernel_ulong_t)&nexio_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + { USB_DEVICE(0x04e7, 0x0020), + .driver_info = (kernel_ulong_t)&elo_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + { USB_DEVICE(0x7374, 0x0001), + .driver_info = (kernel_ulong_t)&etouch_dev_info }, +#endif + + { } +}; MODULE_DEVICE_TABLE(usb, usbtouch_devices); static struct usb_driver usbtouch_driver = { @@ -1852,6 +1791,7 @@ static struct usb_driver usbtouch_driver = { .resume = usbtouch_resume, .reset_resume = usbtouch_reset_resume, .id_table = usbtouch_devices, + .dev_groups = usbtouch_groups, .supports_autosuspend = 1, }; diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index fdf2d1e770c8..4b8c4ebfff96 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -9,21 +9,20 @@ * Author: Pieter Truter<ptruter@intrinsyc.com> */ -#include <linux/module.h> -#include <linux/hrtimer.h> -#include <linux/slab.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> #include <linux/delay.h> -#include <linux/gpio/consumer.h> #include <linux/device.h> -#include <linux/sysfs.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> #include <linux/input/mt.h> #include <linux/input/touchscreen.h> -#include <linux/platform_data/zforce_ts.h> -#include <linux/regulator/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> #include <linux/of.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <asm/unaligned.h> #define WAIT_TIMEOUT msecs_to_jiffies(1000) @@ -97,9 +96,7 @@ struct zforce_point { * @suspending in the process of going to suspend (don't emit wakeup * events for commands executed to suspend the device) * @suspended device suspended - * @access_mutex serialize i2c-access, to keep multipart reads together * @command_done completion to wait for the command result - * @command_mutex serialize commands sent to the ic * @command_waiting the id of the command that is currently waiting * for a result * @command_result returned result of the command @@ -108,11 +105,8 @@ struct zforce_ts { struct i2c_client *client; struct input_dev *input; struct touchscreen_properties prop; - const struct zforce_ts_platdata *pdata; char phys[32]; - struct regulator *reg_vdd; - struct gpio_desc *gpio_int; struct gpio_desc *gpio_rst; @@ -126,10 +120,7 @@ struct zforce_ts { u16 version_build; u16 version_rev; - struct mutex access_mutex; - struct completion command_done; - struct mutex command_mutex; int command_waiting; int command_result; }; @@ -146,9 +137,7 @@ static int zforce_command(struct zforce_ts *ts, u8 cmd) buf[1] = 1; /* data size, command only */ buf[2] = cmd; - mutex_lock(&ts->access_mutex); ret = i2c_master_send(client, &buf[0], ARRAY_SIZE(buf)); - mutex_unlock(&ts->access_mutex); if (ret < 0) { dev_err(&client->dev, "i2c send data request error: %d\n", ret); return ret; @@ -157,59 +146,36 @@ static int zforce_command(struct zforce_ts *ts, u8 cmd) return 0; } -static void zforce_reset_assert(struct zforce_ts *ts) -{ - gpiod_set_value_cansleep(ts->gpio_rst, 1); -} - -static void zforce_reset_deassert(struct zforce_ts *ts) -{ - gpiod_set_value_cansleep(ts->gpio_rst, 0); -} - static int zforce_send_wait(struct zforce_ts *ts, const char *buf, int len) { struct i2c_client *client = ts->client; int ret; - ret = mutex_trylock(&ts->command_mutex); - if (!ret) { - dev_err(&client->dev, "already waiting for a command\n"); - return -EBUSY; - } - dev_dbg(&client->dev, "sending %d bytes for command 0x%x\n", buf[1], buf[2]); ts->command_waiting = buf[2]; - mutex_lock(&ts->access_mutex); ret = i2c_master_send(client, buf, len); - mutex_unlock(&ts->access_mutex); if (ret < 0) { dev_err(&client->dev, "i2c send data request error: %d\n", ret); - goto unlock; + return ret; } dev_dbg(&client->dev, "waiting for result for command 0x%x\n", buf[2]); - if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) { - ret = -ETIME; - goto unlock; - } + if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) + return -ETIME; ret = ts->command_result; - -unlock: - mutex_unlock(&ts->command_mutex); - return ret; + return 0; } static int zforce_command_wait(struct zforce_ts *ts, u8 cmd) { struct i2c_client *client = ts->client; char buf[3]; - int ret; + int error; dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd); @@ -217,10 +183,11 @@ static int zforce_command_wait(struct zforce_ts *ts, u8 cmd) buf[1] = 1; /* data size, command only */ buf[2] = cmd; - ret = zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf)); - if (ret < 0) { - dev_err(&client->dev, "i2c send data request error: %d\n", ret); - return ret; + error = zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf)); + if (error) { + dev_err(&client->dev, "i2c send data request error: %d\n", + error); + return error; } return 0; @@ -268,40 +235,40 @@ static int zforce_setconfig(struct zforce_ts *ts, char b1) static int zforce_start(struct zforce_ts *ts) { struct i2c_client *client = ts->client; - int ret; + int error; dev_dbg(&client->dev, "starting device\n"); - ret = zforce_command_wait(ts, COMMAND_INITIALIZE); - if (ret) { - dev_err(&client->dev, "Unable to initialize, %d\n", ret); - return ret; + error = zforce_command_wait(ts, COMMAND_INITIALIZE); + if (error) { + dev_err(&client->dev, "Unable to initialize, %d\n", error); + return error; } - ret = zforce_resolution(ts, ts->prop.max_x, ts->prop.max_y); - if (ret) { - dev_err(&client->dev, "Unable to set resolution, %d\n", ret); - goto error; + error = zforce_resolution(ts, ts->prop.max_x, ts->prop.max_y); + if (error) { + dev_err(&client->dev, "Unable to set resolution, %d\n", error); + goto err_deactivate; } - ret = zforce_scan_frequency(ts, 10, 50, 50); - if (ret) { + error = zforce_scan_frequency(ts, 10, 50, 50); + if (error) { dev_err(&client->dev, "Unable to set scan frequency, %d\n", - ret); - goto error; + error); + goto err_deactivate; } - ret = zforce_setconfig(ts, SETCONFIG_DUALTOUCH); - if (ret) { + error = zforce_setconfig(ts, SETCONFIG_DUALTOUCH); + if (error) { dev_err(&client->dev, "Unable to set config\n"); - goto error; + goto err_deactivate; } /* start sending touch events */ - ret = zforce_command(ts, COMMAND_DATAREQUEST); - if (ret) { + error = zforce_command(ts, COMMAND_DATAREQUEST); + if (error) { dev_err(&client->dev, "Unable to request data\n"); - goto error; + goto err_deactivate; } /* @@ -312,24 +279,24 @@ static int zforce_start(struct zforce_ts *ts) return 0; -error: +err_deactivate: zforce_command_wait(ts, COMMAND_DEACTIVATE); - return ret; + return error; } static int zforce_stop(struct zforce_ts *ts) { struct i2c_client *client = ts->client; - int ret; + int error; dev_dbg(&client->dev, "stopping device\n"); /* Deactivates touch sensing and puts the device into sleep. */ - ret = zforce_command_wait(ts, COMMAND_DEACTIVATE); - if (ret != 0) { + error = zforce_command_wait(ts, COMMAND_DEACTIVATE); + if (error) { dev_err(&client->dev, "could not deactivate device, %d\n", - ret); - return ret; + error); + return error; } return 0; @@ -340,6 +307,7 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) struct i2c_client *client = ts->client; struct zforce_point point; int count, i, num = 0; + u8 *p; count = payload[0]; if (count > ZFORCE_REPORT_POINTS) { @@ -350,10 +318,10 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) } for (i = 0; i < count; i++) { - point.coord_x = - payload[9 * i + 2] << 8 | payload[9 * i + 1]; - point.coord_y = - payload[9 * i + 4] << 8 | payload[9 * i + 3]; + p = &payload[i * 9 + 1]; + + point.coord_x = get_unaligned_le16(&p[0]); + point.coord_y = get_unaligned_le16(&p[2]); if (point.coord_x > ts->prop.max_x || point.coord_y > ts->prop.max_y) { @@ -362,18 +330,16 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) point.coord_x = point.coord_y = 0; } - point.state = payload[9 * i + 5] & 0x0f; - point.id = (payload[9 * i + 5] & 0xf0) >> 4; + point.state = p[4] & 0x0f; + point.id = (p[4] & 0xf0) >> 4; /* determine touch major, minor and orientation */ - point.area_major = max(payload[9 * i + 6], - payload[9 * i + 7]); - point.area_minor = min(payload[9 * i + 6], - payload[9 * i + 7]); - point.orientation = payload[9 * i + 6] > payload[9 * i + 7]; + point.area_major = max(p[5], p[6]); + point.area_minor = min(p[5], p[6]); + point.orientation = p[5] > p[6]; - point.pressure = payload[9 * i + 8]; - point.prblty = payload[9 * i + 9]; + point.pressure = p[7]; + point.prblty = p[8]; dev_dbg(&client->dev, "point %d/%d: state %d, id %d, pressure %d, prblty %d, x %d, y %d, amajor %d, aminor %d, ori %d\n", @@ -386,10 +352,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) /* the zforce id starts with "1", so needs to be decreased */ input_mt_slot(ts->input, point.id - 1); - input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, - point.state != STATE_UP); - - if (point.state != STATE_UP) { + if (input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, + point.state != STATE_UP)) { touchscreen_report_pos(ts->input, &ts->prop, point.coord_x, point.coord_y, true); @@ -417,41 +381,35 @@ static int zforce_read_packet(struct zforce_ts *ts, u8 *buf) struct i2c_client *client = ts->client; int ret; - mutex_lock(&ts->access_mutex); - /* read 2 byte message header */ ret = i2c_master_recv(client, buf, 2); if (ret < 0) { dev_err(&client->dev, "error reading header: %d\n", ret); - goto unlock; + return ret; } if (buf[PAYLOAD_HEADER] != FRAME_START) { dev_err(&client->dev, "invalid frame start: %d\n", buf[0]); - ret = -EIO; - goto unlock; + return -EIO; } if (buf[PAYLOAD_LENGTH] == 0) { dev_err(&client->dev, "invalid payload length: %d\n", buf[PAYLOAD_LENGTH]); - ret = -EIO; - goto unlock; + return -EIO; } /* read the message */ ret = i2c_master_recv(client, &buf[PAYLOAD_BODY], buf[PAYLOAD_LENGTH]); if (ret < 0) { dev_err(&client->dev, "error reading payload: %d\n", ret); - goto unlock; + return ret; } dev_dbg(&client->dev, "read %d bytes for response command 0x%x\n", buf[PAYLOAD_LENGTH], buf[PAYLOAD_BODY]); -unlock: - mutex_unlock(&ts->access_mutex); - return ret; + return 0; } static void zforce_complete(struct zforce_ts *ts, int cmd, int result) @@ -482,9 +440,10 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) { struct zforce_ts *ts = dev_id; struct i2c_client *client = ts->client; - int ret; + int error; u8 payload_buffer[FRAME_MAXSIZE]; u8 *payload; + bool suspending; /* * When still suspended, return. @@ -498,7 +457,8 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) dev_dbg(&client->dev, "handling interrupt\n"); /* Don't emit wakeup events from commands run by zforce_suspend */ - if (!ts->suspending && device_may_wakeup(&client->dev)) + suspending = READ_ONCE(ts->suspending); + if (!suspending && device_may_wakeup(&client->dev)) pm_stay_awake(&client->dev); /* @@ -511,10 +471,10 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) * no IRQ any more) */ do { - ret = zforce_read_packet(ts, payload_buffer); - if (ret < 0) { + error = zforce_read_packet(ts, payload_buffer); + if (error) { dev_err(&client->dev, - "could not read packet, ret: %d\n", ret); + "could not read packet, ret: %d\n", error); break; } @@ -526,7 +486,7 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) * Always report touch-events received while * suspending, when being a wakeup source */ - if (ts->suspending && device_may_wakeup(&client->dev)) + if (suspending && device_may_wakeup(&client->dev)) pm_wakeup_event(&client->dev, 500); zforce_touch_event(ts, &payload[RESPONSE_DATA]); break; @@ -550,14 +510,15 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) * Version Payload Results * [2:major] [2:minor] [2:build] [2:rev] */ - ts->version_major = (payload[RESPONSE_DATA + 1] << 8) | - payload[RESPONSE_DATA]; - ts->version_minor = (payload[RESPONSE_DATA + 3] << 8) | - payload[RESPONSE_DATA + 2]; - ts->version_build = (payload[RESPONSE_DATA + 5] << 8) | - payload[RESPONSE_DATA + 4]; - ts->version_rev = (payload[RESPONSE_DATA + 7] << 8) | - payload[RESPONSE_DATA + 6]; + ts->version_major = + get_unaligned_le16(&payload[RESPONSE_DATA]); + ts->version_minor = + get_unaligned_le16(&payload[RESPONSE_DATA + 2]); + ts->version_build = + get_unaligned_le16(&payload[RESPONSE_DATA + 4]); + ts->version_rev = + get_unaligned_le16(&payload[RESPONSE_DATA + 6]); + dev_dbg(&ts->client->dev, "Firmware Version %04x:%04x %04x:%04x\n", ts->version_major, ts->version_minor, @@ -579,7 +540,7 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) } } while (gpiod_get_value_cansleep(ts->gpio_int)); - if (!ts->suspending && device_may_wakeup(&client->dev)) + if (!suspending && device_may_wakeup(&client->dev)) pm_relax(&client->dev); dev_dbg(&client->dev, "finished interrupt\n"); @@ -598,24 +559,20 @@ static void zforce_input_close(struct input_dev *dev) { struct zforce_ts *ts = input_get_drvdata(dev); struct i2c_client *client = ts->client; - int ret; + int error; - ret = zforce_stop(ts); - if (ret) + error = zforce_stop(ts); + if (error) dev_warn(&client->dev, "stopping zforce failed\n"); - - return; } -static int zforce_suspend(struct device *dev) +static int __zforce_suspend(struct zforce_ts *ts) { - struct i2c_client *client = to_i2c_client(dev); - struct zforce_ts *ts = i2c_get_clientdata(client); + struct i2c_client *client = ts->client; struct input_dev *input = ts->input; - int ret = 0; + int error; - mutex_lock(&input->mutex); - ts->suspending = true; + guard(mutex)(&input->mutex); /* * When configured as a wakeup source device should always wake @@ -626,9 +583,9 @@ static int zforce_suspend(struct device *dev) /* Need to start device, if not open, to be a wakeup source. */ if (!input_device_enabled(input)) { - ret = zforce_start(ts); - if (ret) - goto unlock; + error = zforce_start(ts); + if (error) + return error; } enable_irq_wake(client->irq); @@ -636,18 +593,30 @@ static int zforce_suspend(struct device *dev) dev_dbg(&client->dev, "suspend without being a wakeup source\n"); - ret = zforce_stop(ts); - if (ret) - goto unlock; + error = zforce_stop(ts); + if (error) + return error; disable_irq(client->irq); } ts->suspended = true; + return 0; +} + +static int zforce_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct zforce_ts *ts = i2c_get_clientdata(client); + int ret; + + WRITE_ONCE(ts->suspending, true); + smp_mb(); -unlock: - ts->suspending = false; - mutex_unlock(&input->mutex); + ret = __zforce_suspend(ts); + + smp_mb(); + WRITE_ONCE(ts->suspending, false); return ret; } @@ -657,9 +626,9 @@ static int zforce_resume(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct zforce_ts *ts = i2c_get_clientdata(client); struct input_dev *input = ts->input; - int ret = 0; + int error; - mutex_lock(&input->mutex); + guard(mutex)(&input->mutex); ts->suspended = false; @@ -670,24 +639,21 @@ static int zforce_resume(struct device *dev) /* need to stop device if it was not open on suspend */ if (!input_device_enabled(input)) { - ret = zforce_stop(ts); - if (ret) - goto unlock; + error = zforce_stop(ts); + if (error) + return error; } } else if (input_device_enabled(input)) { dev_dbg(&client->dev, "resume without being a wakeup source\n"); enable_irq(client->irq); - ret = zforce_start(ts); - if (ret < 0) - goto unlock; + error = zforce_start(ts); + if (error) + return error; } -unlock: - mutex_unlock(&input->mutex); - - return ret; + return 0; } static DEFINE_SIMPLE_DEV_PM_OPS(zforce_pm_ops, zforce_suspend, zforce_resume); @@ -696,46 +662,27 @@ static void zforce_reset(void *data) { struct zforce_ts *ts = data; - zforce_reset_assert(ts); - + gpiod_set_value_cansleep(ts->gpio_rst, 1); udelay(10); - - if (!IS_ERR(ts->reg_vdd)) - regulator_disable(ts->reg_vdd); } -static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) +static void zforce_ts_parse_legacy_properties(struct zforce_ts *ts) { - struct zforce_ts_platdata *pdata; - struct device_node *np = dev->of_node; + u32 x_max = 0; + u32 y_max = 0; - if (!np) - return ERR_PTR(-ENOENT); + device_property_read_u32(&ts->client->dev, "x-size", &x_max); + input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, x_max, 0, 0); - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - dev_err(dev, "failed to allocate platform data\n"); - return ERR_PTR(-ENOMEM); - } - - of_property_read_u32(np, "x-size", &pdata->x_max); - of_property_read_u32(np, "y-size", &pdata->y_max); - - return pdata; + device_property_read_u32(&ts->client->dev, "y-size", &y_max); + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, y_max, 0, 0); } static int zforce_probe(struct i2c_client *client) { - const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev); struct zforce_ts *ts; struct input_dev *input_dev; - int ret; - - if (!pdata) { - pdata = zforce_parse_dt(&client->dev); - if (IS_ERR(pdata)) - return PTR_ERR(pdata); - } + int error; ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL); if (!ts) @@ -743,22 +690,18 @@ static int zforce_probe(struct i2c_client *client) ts->gpio_rst = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(ts->gpio_rst)) { - ret = PTR_ERR(ts->gpio_rst); - dev_err(&client->dev, - "failed to request reset GPIO: %d\n", ret); - return ret; - } + error = PTR_ERR_OR_ZERO(ts->gpio_rst); + if (error) + return dev_err_probe(&client->dev, error, + "failed to request reset GPIO\n"); if (ts->gpio_rst) { ts->gpio_int = devm_gpiod_get_optional(&client->dev, "irq", GPIOD_IN); - if (IS_ERR(ts->gpio_int)) { - ret = PTR_ERR(ts->gpio_int); - dev_err(&client->dev, - "failed to request interrupt GPIO: %d\n", ret); - return ret; - } + error = PTR_ERR_OR_ZERO(ts->gpio_int); + if (error) + return dev_err_probe(&client->dev, error, + "failed to request interrupt GPIO\n"); } else { /* * Deprecated GPIO handling for compatibility @@ -768,66 +711,45 @@ static int zforce_probe(struct i2c_client *client) /* INT GPIO */ ts->gpio_int = devm_gpiod_get_index(&client->dev, NULL, 0, GPIOD_IN); - if (IS_ERR(ts->gpio_int)) { - ret = PTR_ERR(ts->gpio_int); - dev_err(&client->dev, - "failed to request interrupt GPIO: %d\n", ret); - return ret; - } + + error = PTR_ERR_OR_ZERO(ts->gpio_int); + if (error) + return dev_err_probe(&client->dev, error, + "failed to request interrupt GPIO\n"); /* RST GPIO */ ts->gpio_rst = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_HIGH); - if (IS_ERR(ts->gpio_rst)) { - ret = PTR_ERR(ts->gpio_rst); - dev_err(&client->dev, - "failed to request reset GPIO: %d\n", ret); - return ret; - } - } - - ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd"); - if (IS_ERR(ts->reg_vdd)) { - ret = PTR_ERR(ts->reg_vdd); - if (ret == -EPROBE_DEFER) - return ret; - } else { - ret = regulator_enable(ts->reg_vdd); - if (ret) - return ret; - - /* - * according to datasheet add 100us grace time after regular - * regulator enable delay. - */ - udelay(100); + error = PTR_ERR_OR_ZERO(ts->gpio_rst); + if (error) + return dev_err_probe(&client->dev, error, + "failed to request reset GPIO\n"); } - ret = devm_add_action(&client->dev, zforce_reset, ts); - if (ret) { - dev_err(&client->dev, "failed to register reset action, %d\n", - ret); + error = devm_regulator_get_enable(&client->dev, "vdd"); + if (error) + return dev_err_probe(&client->dev, error, + "failed to request vdd supply\n"); - /* hereafter the regulator will be disabled by the action */ - if (!IS_ERR(ts->reg_vdd)) - regulator_disable(ts->reg_vdd); + /* + * According to datasheet add 100us grace time after regular + * regulator enable delay. + */ + usleep_range(100, 200); - return ret; - } + error = devm_add_action_or_reset(&client->dev, zforce_reset, ts); + if (error) + return dev_err_probe(&client->dev, error, + "failed to register reset action\n"); snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&client->dev)); input_dev = devm_input_allocate_device(&client->dev); - if (!input_dev) { - dev_err(&client->dev, "could not allocate input device\n"); - return -ENOMEM; - } - - mutex_init(&ts->access_mutex); - mutex_init(&ts->command_mutex); + if (!input_dev) + return dev_err_probe(&client->dev, -ENOMEM, + "could not allocate input device\n"); - ts->pdata = pdata; ts->client = client; ts->input = input_dev; @@ -838,28 +760,21 @@ static int zforce_probe(struct i2c_client *client) input_dev->open = zforce_input_open; input_dev->close = zforce_input_close; - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(EV_SYN, input_dev->evbit); - __set_bit(EV_ABS, input_dev->evbit); - - /* For multi touch */ - input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, - pdata->x_max, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, - pdata->y_max, 0, 0); - + zforce_ts_parse_legacy_properties(ts); touchscreen_parse_properties(input_dev, true, &ts->prop); - if (ts->prop.max_x == 0 || ts->prop.max_y == 0) { - dev_err(&client->dev, "no size specified\n"); - return -EINVAL; - } + if (ts->prop.max_x == 0 || ts->prop.max_y == 0) + return dev_err_probe(&client->dev, -EINVAL, "no size specified"); input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, ZFORCE_MAX_AREA, 0, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, ZFORCE_MAX_AREA, 0, 0); input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); - input_mt_init_slots(input_dev, ZFORCE_REPORT_POINTS, INPUT_MT_DIRECT); + + error = input_mt_init_slots(input_dev, ZFORCE_REPORT_POINTS, + INPUT_MT_DIRECT); + if (error) + return error; input_set_drvdata(ts->input, ts); @@ -872,57 +787,51 @@ static int zforce_probe(struct i2c_client *client) * Therefore we can trigger the interrupt anytime it is low and do * not need to limit it to the interrupt edge. */ - ret = devm_request_threaded_irq(&client->dev, client->irq, - zforce_irq, zforce_irq_thread, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - input_dev->name, ts); - if (ret) { - dev_err(&client->dev, "irq %d request failed\n", client->irq); - return ret; - } + error = devm_request_threaded_irq(&client->dev, client->irq, + zforce_irq, zforce_irq_thread, + IRQF_ONESHOT, input_dev->name, ts); + if (error) + return dev_err_probe(&client->dev, error, + "irq %d request failed\n", client->irq); i2c_set_clientdata(client, ts); /* let the controller boot */ - zforce_reset_deassert(ts); + gpiod_set_value_cansleep(ts->gpio_rst, 0); ts->command_waiting = NOTIFICATION_BOOTCOMPLETE; if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) dev_warn(&client->dev, "bootcomplete timed out\n"); /* need to start device to get version information */ - ret = zforce_command_wait(ts, COMMAND_INITIALIZE); - if (ret) { - dev_err(&client->dev, "unable to initialize, %d\n", ret); - return ret; - } + error = zforce_command_wait(ts, COMMAND_INITIALIZE); + if (error) + return dev_err_probe(&client->dev, error, "unable to initialize\n"); /* this gets the firmware version among other information */ - ret = zforce_command_wait(ts, COMMAND_STATUS); - if (ret < 0) { - dev_err(&client->dev, "couldn't get status, %d\n", ret); + error = zforce_command_wait(ts, COMMAND_STATUS); + if (error) { + dev_err_probe(&client->dev, error, "couldn't get status\n"); zforce_stop(ts); - return ret; + return error; } /* stop device and put it into sleep until it is opened */ - ret = zforce_stop(ts); - if (ret < 0) - return ret; + error = zforce_stop(ts); + if (error) + return error; device_set_wakeup_capable(&client->dev, true); - ret = input_register_device(input_dev); - if (ret) { - dev_err(&client->dev, "could not register input device, %d\n", - ret); - return ret; - } + error = input_register_device(input_dev); + if (error) + return dev_err_probe(&client->dev, error, + "could not register input device\n"); return 0; } -static struct i2c_device_id zforce_idtable[] = { +static const struct i2c_device_id zforce_idtable[] = { { "zforce-ts" }, { } }; @@ -941,6 +850,7 @@ static struct i2c_driver zforce_driver = { .name = "zforce-ts", .pm = pm_sleep_ptr(&zforce_pm_ops), .of_match_table = of_match_ptr(zforce_dt_idtable), + .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, .probe = zforce_probe, .id_table = zforce_idtable, diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c index 1b4807ba4624..52b3950460e2 100644 --- a/drivers/input/touchscreen/zinitix.c +++ b/drivers/input/touchscreen/zinitix.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -34,7 +35,13 @@ #define ZINITIX_DEBUG_REG 0x0115 /* 0~7 */ #define ZINITIX_TOUCH_MODE 0x0010 + #define ZINITIX_CHIP_REVISION 0x0011 +#define ZINITIX_CHIP_BTX0X_MASK 0xF0F0 +#define ZINITIX_CHIP_BT4X2 0x4020 +#define ZINITIX_CHIP_BT4X3 0x4030 +#define ZINITIX_CHIP_BT4X4 0x4040 + #define ZINITIX_FIRMWARE_VERSION 0x0012 #define ZINITIX_USB_DETECT 0x116 @@ -62,7 +69,11 @@ #define ZINITIX_Y_RESOLUTION 0x00C1 #define ZINITIX_POINT_STATUS_REG 0x0080 -#define ZINITIX_ICON_STATUS_REG 0x00AA + +#define ZINITIX_BT4X2_ICON_STATUS_REG 0x009A +#define ZINITIX_BT4X3_ICON_STATUS_REG 0x00A0 +#define ZINITIX_BT4X4_ICON_STATUS_REG 0x00A0 +#define ZINITIX_BT5XX_ICON_STATUS_REG 0x00AA #define ZINITIX_POINT_COORD_REG (ZINITIX_POINT_STATUS_REG + 2) @@ -119,6 +130,7 @@ #define DEFAULT_TOUCH_POINT_MODE 2 #define MAX_SUPPORTED_FINGER_NUM 5 +#define MAX_SUPPORTED_BUTTON_NUM 8 #define CHIP_ON_DELAY 15 // ms #define FIRMWARE_ON_DELAY 40 // ms @@ -146,6 +158,13 @@ struct bt541_ts_data { struct touchscreen_properties prop; struct regulator_bulk_data supplies[2]; u32 zinitix_mode; + u32 keycodes[MAX_SUPPORTED_BUTTON_NUM]; + int num_keycodes; + bool have_versioninfo; + u16 chip_revision; + u16 firmware_version; + u16 regdata_version; + u16 icon_status_reg; }; static int zinitix_read_data(struct i2c_client *client, @@ -190,11 +209,25 @@ static int zinitix_write_cmd(struct i2c_client *client, u16 reg) return 0; } +static u16 zinitix_get_u16_reg(struct bt541_ts_data *bt541, u16 vreg) +{ + struct i2c_client *client = bt541->client; + int error; + __le16 val; + + error = zinitix_read_data(client, vreg, (void *)&val, 2); + if (error) + return U8_MAX; + + return le16_to_cpu(val); +} + static int zinitix_init_touch(struct bt541_ts_data *bt541) { struct i2c_client *client = bt541->client; int i; int error; + u16 int_flags; error = zinitix_write_cmd(client, ZINITIX_SWRESET_CMD); if (error) { @@ -202,6 +235,47 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) return error; } + /* + * Read and cache the chip revision and firmware version the first time + * we get here. + */ + if (!bt541->have_versioninfo) { + bt541->chip_revision = zinitix_get_u16_reg(bt541, + ZINITIX_CHIP_REVISION); + bt541->firmware_version = zinitix_get_u16_reg(bt541, + ZINITIX_FIRMWARE_VERSION); + bt541->regdata_version = zinitix_get_u16_reg(bt541, + ZINITIX_DATA_VERSION_REG); + bt541->have_versioninfo = true; + + dev_dbg(&client->dev, + "chip revision %04x firmware version %04x regdata version %04x\n", + bt541->chip_revision, bt541->firmware_version, + bt541->regdata_version); + + /* + * Determine the "icon" status register which varies by the + * chip. + */ + switch (bt541->chip_revision & ZINITIX_CHIP_BTX0X_MASK) { + case ZINITIX_CHIP_BT4X2: + bt541->icon_status_reg = ZINITIX_BT4X2_ICON_STATUS_REG; + break; + + case ZINITIX_CHIP_BT4X3: + bt541->icon_status_reg = ZINITIX_BT4X3_ICON_STATUS_REG; + break; + + case ZINITIX_CHIP_BT4X4: + bt541->icon_status_reg = ZINITIX_BT4X4_ICON_STATUS_REG; + break; + + default: + bt541->icon_status_reg = ZINITIX_BT5XX_ICON_STATUS_REG; + break; + } + } + error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, 0x0); if (error) { dev_err(&client->dev, @@ -225,6 +299,11 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) if (error) return error; + error = zinitix_write_u16(client, ZINITIX_BUTTON_SUPPORTED_NUM, + bt541->num_keycodes); + if (error) + return error; + error = zinitix_write_u16(client, ZINITIX_INITIAL_TOUCH_MODE, bt541->zinitix_mode); if (error) @@ -235,9 +314,11 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) if (error) return error; - error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, - BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | - BIT_UP); + int_flags = BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | BIT_UP; + if (bt541->num_keycodes) + int_flags |= BIT_ICON_EVENT; + + error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, int_flags); if (error) return error; @@ -350,12 +431,22 @@ static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot, } } +static void zinitix_report_keys(struct bt541_ts_data *bt541, u16 icon_events) +{ + int i; + + for (i = 0; i < bt541->num_keycodes; i++) + input_report_key(bt541->input_dev, + bt541->keycodes[i], icon_events & BIT(i)); +} + static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) { struct bt541_ts_data *bt541 = bt541_handler; struct i2c_client *client = bt541->client; struct touch_event touch_event; unsigned long finger_mask; + __le16 icon_events; int error; int i; @@ -368,6 +459,17 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) goto out; } + if (le16_to_cpu(touch_event.status) & BIT_ICON_EVENT) { + error = zinitix_read_data(bt541->client, bt541->icon_status_reg, + &icon_events, sizeof(icon_events)); + if (error) { + dev_err(&client->dev, "Failed to read icon events\n"); + goto out; + } + + zinitix_report_keys(bt541, le16_to_cpu(icon_events)); + } + finger_mask = touch_event.finger_mask; for_each_set_bit(i, &finger_mask, MAX_SUPPORTED_FINGER_NUM) { const struct point_coord *p = &touch_event.point_coord[i]; @@ -453,6 +555,7 @@ static int zinitix_init_input_dev(struct bt541_ts_data *bt541) { struct input_dev *input_dev; int error; + int i; input_dev = devm_input_allocate_device(&bt541->client->dev); if (!input_dev) { @@ -470,6 +573,14 @@ static int zinitix_init_input_dev(struct bt541_ts_data *bt541) input_dev->open = zinitix_input_open; input_dev->close = zinitix_input_close; + if (bt541->num_keycodes) { + input_dev->keycode = bt541->keycodes; + input_dev->keycodemax = bt541->num_keycodes; + input_dev->keycodesize = sizeof(bt541->keycodes[0]); + for (i = 0; i < bt541->num_keycodes; i++) + input_set_capability(input_dev, EV_KEY, bt541->keycodes[i]); + } + input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X); input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y); input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); @@ -534,6 +645,21 @@ static int zinitix_ts_probe(struct i2c_client *client) return error; } + bt541->num_keycodes = device_property_count_u32(&client->dev, "linux,keycodes"); + if (bt541->num_keycodes > ARRAY_SIZE(bt541->keycodes)) { + dev_err(&client->dev, "too many keys defined (%d)\n", bt541->num_keycodes); + return -EINVAL; + } + + error = device_property_read_u32_array(&client->dev, "linux,keycodes", + bt541->keycodes, + bt541->num_keycodes); + if (error) { + dev_err(&client->dev, + "Unable to parse \"linux,keycodes\" property: %d\n", error); + return error; + } + error = zinitix_init_input_dev(bt541); if (error) { dev_err(&client->dev, diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index b8d8d69eba29..90867f44ab4d 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -34,52 +34,6 @@ struct matrix_keymap_data { unsigned int keymap_size; }; -/** - * struct matrix_keypad_platform_data - platform-dependent keypad data - * @keymap_data: pointer to &matrix_keymap_data - * @row_gpios: pointer to array of gpio numbers representing rows - * @col_gpios: pointer to array of gpio numbers reporesenting colums - * @num_row_gpios: actual number of row gpios used by device - * @num_col_gpios: actual number of col gpios used by device - * @col_scan_delay_us: delay, measured in microseconds, that is - * needed before we can keypad after activating column gpio - * @debounce_ms: debounce interval in milliseconds - * @clustered_irq: may be specified if interrupts of all row/column GPIOs - * are bundled to one single irq - * @clustered_irq_flags: flags that are needed for the clustered irq - * @active_low: gpio polarity - * @wakeup: controls whether the device should be set up as wakeup - * source - * @no_autorepeat: disable key autorepeat - * @drive_inactive_cols: drive inactive columns during scan, rather than - * making them inputs. - * - * This structure represents platform-specific data that use used by - * matrix_keypad driver to perform proper initialization. - */ -struct matrix_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - const unsigned int *row_gpios; - const unsigned int *col_gpios; - - unsigned int num_row_gpios; - unsigned int num_col_gpios; - - unsigned int col_scan_delay_us; - - /* key debounce interval in milli-second */ - unsigned int debounce_ms; - - unsigned int clustered_irq; - unsigned int clustered_irq_flags; - - bool active_low; - bool wakeup; - bool no_autorepeat; - bool drive_inactive_cols; -}; - int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, const char *keymap_name, unsigned int rows, unsigned int cols, @@ -88,6 +42,4 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, int matrix_keypad_parse_properties(struct device *dev, unsigned int *rows, unsigned int *cols); -#define matrix_keypad_parse_of_params matrix_keypad_parse_properties - #endif /* _MATRIX_KEYPAD_H */ diff --git a/include/linux/platform_data/cyttsp4.h b/include/linux/platform_data/cyttsp4.h deleted file mode 100644 index 5dc9d2be384b..000000000000 --- a/include/linux/platform_data/cyttsp4.h +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Header file for: - * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. - * For use with Cypress Txx3xx parts. - * Supported parts include: - * CY8CTST341 - * CY8CTMA340 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> - * - * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) - */ -#ifndef _CYTTSP4_H_ -#define _CYTTSP4_H_ - -#define CYTTSP4_MT_NAME "cyttsp4_mt" -#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter" -#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter" - -#define CY_TOUCH_SETTINGS_MAX 32 - -struct touch_framework { - const uint16_t *abs; - uint8_t size; - uint8_t enable_vkeys; -} __packed; - -struct cyttsp4_mt_platform_data { - struct touch_framework *frmwrk; - unsigned short flags; - char const *inp_dev_name; -}; - -struct touch_settings { - const uint8_t *data; - uint32_t size; - uint8_t tag; -} __packed; - -struct cyttsp4_core_platform_data { - int irq_gpio; - int rst_gpio; - int level_irq_udelay; - int (*xres)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - int (*init)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev); - int (*power)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev, atomic_t *ignore_irq); - int (*irq_stat)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX]; -}; - -struct cyttsp4_platform_data { - struct cyttsp4_core_platform_data *core_pdata; - struct cyttsp4_mt_platform_data *mt_pdata; -}; - -#endif /* _CYTTSP4_H_ */ diff --git a/include/linux/platform_data/keypad-nomadik-ske.h b/include/linux/platform_data/keypad-nomadik-ske.h deleted file mode 100644 index 7efabbca1dca..000000000000 --- a/include/linux/platform_data/keypad-nomadik-ske.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> - * - * ux500 Scroll key and Keypad Encoder (SKE) header - */ - -#ifndef __SKE_H -#define __SKE_H - -#include <linux/input/matrix_keypad.h> - -/* register definitions for SKE peripheral */ -#define SKE_CR 0x00 -#define SKE_VAL0 0x04 -#define SKE_VAL1 0x08 -#define SKE_DBCR 0x0C -#define SKE_IMSC 0x10 -#define SKE_RIS 0x14 -#define SKE_MIS 0x18 -#define SKE_ICR 0x1C - -/* - * Keypad module - */ - -/** - * struct keypad_platform_data - structure for platform specific data - * @init: pointer to keypad init function - * @exit: pointer to keypad deinitialisation function - * @keymap_data: matrix scan code table for keycodes - * @krow: maximum number of rows - * @kcol: maximum number of columns - * @debounce_ms: platform specific debounce time - * @no_autorepeat: flag for auto repetition - * @wakeup_enable: allow waking up the system - */ -struct ske_keypad_platform_data { - int (*init)(void); - int (*exit)(void); - const struct matrix_keymap_data *keymap_data; - u8 krow; - u8 kcol; - u8 debounce_ms; - bool no_autorepeat; - bool wakeup_enable; -}; -#endif /*__SKE_KPD_H*/ diff --git a/include/linux/platform_data/mcs.h b/include/linux/platform_data/mcs.h deleted file mode 100644 index fcc6f2a1f5c3..000000000000 --- a/include/linux/platform_data/mcs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * Author: HeungJun Kim <riverful.kim@samsung.com> - */ - -#ifndef __LINUX_MCS_H -#define __LINUX_MCS_H - -#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) -#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) -#define MCS_KEY_CODE(v) ((v) & 0xffff) - -struct mcs_platform_data { - void (*poweron)(bool); - void (*cfg_pin)(void); - - /* touchscreen */ - unsigned int x_size; - unsigned int y_size; - - /* touchkey */ - const u32 *keymap; - unsigned int keymap_size; - unsigned int key_maxval; - bool no_autorepeat; -}; - -#endif /* __LINUX_MCS_H */ diff --git a/include/linux/platform_data/zforce_ts.h b/include/linux/platform_data/zforce_ts.h deleted file mode 100644 index 2463a4a856a6..000000000000 --- a/include/linux/platform_data/zforce_ts.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* drivers/input/touchscreen/zforce.c - * - * Copyright (C) 2012-2013 MundoReader S.L. - */ - -#ifndef _LINUX_INPUT_ZFORCE_TS_H -#define _LINUX_INPUT_ZFORCE_TS_H - -struct zforce_ts_platdata { - unsigned int x_max; - unsigned int y_max; -}; - -#endif /* _LINUX_INPUT_ZFORCE_TS_H */ |