diff options
| -rw-r--r-- | arch/mips/cavium-octeon/octeon-platform.c | 274 | ||||
| -rw-r--r-- | arch/mips/configs/cavium_octeon_defconfig | 3 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/usb/host/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-octeon.c | 182 | ||||
| -rw-r--r-- | drivers/usb/host/octeon2-common.c | 200 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-octeon.c | 196 |
9 files changed, 285 insertions, 599 deletions
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index 6df0f4d8f197..b67ddf0f8bcd 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -7,22 +7,27 @@ * Copyright (C) 2008 Wind River Systems */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/i2c.h> #include <linux/usb.h> #include <linux/dma-mapping.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/of_fdt.h> #include <linux/libfdt.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-rnm-defs.h> #include <asm/octeon/cvmx-helper.h> #include <asm/octeon/cvmx-helper-board.h> +#include <asm/octeon/cvmx-uctlx-defs.h> /* Octeon Random Number Generator. */ static int __init octeon_rng_device_init(void) @@ -68,6 +73,229 @@ device_initcall(octeon_rng_device_init); #ifdef CONFIG_USB +static DEFINE_MUTEX(octeon2_usb_clocks_mutex); + +static int octeon2_usb_clock_start_cnt; + +static void octeon2_usb_clocks_start(void) +{ + u64 div; + union cvmx_uctlx_if_ena if_ena; + union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; + union cvmx_uctlx_uphy_ctl_status uphy_ctl_status; + union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status; + int i; + unsigned long io_clk_64_to_ns; + + + mutex_lock(&octeon2_usb_clocks_mutex); + + octeon2_usb_clock_start_cnt++; + if (octeon2_usb_clock_start_cnt != 1) + goto exit; + + io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate(); + + /* + * Step 1: Wait for voltages stable. That surely happened + * before starting the kernel. + * + * Step 2: Enable SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1 + */ + if_ena.u64 = 0; + if_ena.s.en = 1; + cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64); + + /* Step 3: Configure the reference clock, PHY, and HCLK */ + clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); + + /* + * If the UCTL looks like it has already been started, skip + * the initialization, otherwise bus errors are obtained. + */ + if (clk_rst_ctl.s.hrst) + goto end_clock; + /* 3a */ + clk_rst_ctl.s.p_por = 1; + clk_rst_ctl.s.hrst = 0; + clk_rst_ctl.s.p_prst = 0; + clk_rst_ctl.s.h_clkdiv_rst = 0; + clk_rst_ctl.s.o_clkdiv_rst = 0; + clk_rst_ctl.s.h_clkdiv_en = 0; + clk_rst_ctl.s.o_clkdiv_en = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3b */ + /* 12MHz crystal. */ + clk_rst_ctl.s.p_refclk_sel = 0; + clk_rst_ctl.s.p_refclk_div = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3c */ + div = octeon_get_io_clock_rate() / 130000000ull; + + switch (div) { + case 0: + div = 1; + break; + case 1: + case 2: + case 3: + case 4: + break; + case 5: + div = 4; + break; + case 6: + case 7: + div = 6; + break; + case 8: + case 9: + case 10: + case 11: + div = 8; + break; + default: + div = 12; + break; + } + clk_rst_ctl.s.h_div = div; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + /* Read it back, */ + clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); + clk_rst_ctl.s.h_clkdiv_en = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + /* 3d */ + clk_rst_ctl.s.h_clkdiv_rst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3e: delay 64 io clocks */ + ndelay(io_clk_64_to_ns); + + /* + * Step 4: Program the power-on reset field in the UCTL + * clock-reset-control register. + */ + clk_rst_ctl.s.p_por = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 5: Wait 1 ms for the PHY clock to start. */ + mdelay(1); + + /* + * Step 6: Program the reset input from automatic test + * equipment field in the UPHY CSR + */ + uphy_ctl_status.u64 = cvmx_read_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0)); + uphy_ctl_status.s.ate_reset = 1; + cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); + + /* Step 7: Wait for at least 10ns. */ + ndelay(10); + + /* Step 8: Clear the ATE_RESET field in the UPHY CSR. */ + uphy_ctl_status.s.ate_reset = 0; + cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); + + /* + * Step 9: Wait for at least 20ns for UPHY to output PHY clock + * signals and OHCI_CLK48 + */ + ndelay(20); + + /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */ + /* 10a */ + clk_rst_ctl.s.o_clkdiv_rst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 10b */ + clk_rst_ctl.s.o_clkdiv_en = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 10c */ + ndelay(io_clk_64_to_ns); + + /* + * Step 11: Program the PHY reset field: + * UCTL0_CLK_RST_CTL[P_PRST] = 1 + */ + clk_rst_ctl.s.p_prst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 12: Wait 1 uS. */ + udelay(1); + + /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */ + clk_rst_ctl.s.hrst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + +end_clock: + /* Now we can set some other registers. */ + + for (i = 0; i <= 1; i++) { + port_ctl_status.u64 = + cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0)); + /* Set txvreftune to 15 to obtain compliant 'eye' diagram. */ + port_ctl_status.s.txvreftune = 15; + port_ctl_status.s.txrisetune = 1; + port_ctl_status.s.txpreemphasistune = 1; + cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0), + port_ctl_status.u64); + } + + /* Set uSOF cycle period to 60,000 bits. */ + cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull); +exit: + mutex_unlock(&octeon2_usb_clocks_mutex); +} + +static void octeon2_usb_clocks_stop(void) +{ + mutex_lock(&octeon2_usb_clocks_mutex); + octeon2_usb_clock_start_cnt--; + mutex_unlock(&octeon2_usb_clocks_mutex); +} + +static int octeon_ehci_power_on(struct platform_device *pdev) +{ + octeon2_usb_clocks_start(); + return 0; +} + +static void octeon_ehci_power_off(struct platform_device *pdev) +{ + octeon2_usb_clocks_stop(); +} + +static struct usb_ehci_pdata octeon_ehci_pdata = { + /* Octeon EHCI matches CPU endianness. */ +#ifdef __BIG_ENDIAN + .big_endian_mmio = 1, +#endif + .power_on = octeon_ehci_power_on, + .power_off = octeon_ehci_power_off, +}; + +static void __init octeon_ehci_hw_start(void) +{ + union cvmx_uctlx_ehci_ctl ehci_ctl; + + octeon2_usb_clocks_start(); + + ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0)); + /* Use 64-bit addressing. */ + ehci_ctl.s.ehci_64b_addr_en = 1; + ehci_ctl.s.l2c_addr_msb = 0; + ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ + ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ + cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64); + + octeon2_usb_clocks_stop(); +} + +static u64 octeon_ehci_dma_mask = DMA_BIT_MASK(64); + static int __init octeon_ehci_device_init(void) { struct platform_device *pd; @@ -88,7 +316,7 @@ static int __init octeon_ehci_device_init(void) if (octeon_is_simulation() || usb_disabled()) return 0; /* No USB in the simulator. */ - pd = platform_device_alloc("octeon-ehci", 0); + pd = platform_device_alloc("ehci-platform", 0); if (!pd) { ret = -ENOMEM; goto out; @@ -105,6 +333,10 @@ static int __init octeon_ehci_device_init(void) if (ret) goto fail; + pd->dev.dma_mask = &octeon_ehci_dma_mask; + pd->dev.platform_data = &octeon_ehci_pdata; + octeon_ehci_hw_start(); + ret = platform_device_add(pd); if (ret) goto fail; @@ -117,6 +349,41 @@ out: } device_initcall(octeon_ehci_device_init); +static int octeon_ohci_power_on(struct platform_device *pdev) +{ + octeon2_usb_clocks_start(); + return 0; +} + +static void octeon_ohci_power_off(struct platform_device *pdev) +{ + octeon2_usb_clocks_stop(); +} + +static struct usb_ohci_pdata octeon_ohci_pdata = { + /* Octeon OHCI matches CPU endianness. */ +#ifdef __BIG_ENDIAN + .big_endian_mmio = 1, +#endif + .power_on = octeon_ohci_power_on, + .power_off = octeon_ohci_power_off, +}; + +static void __init octeon_ohci_hw_start(void) +{ + union cvmx_uctlx_ohci_ctl ohci_ctl; + + octeon2_usb_clocks_start(); + + ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0)); + ohci_ctl.s.l2c_addr_msb = 0; + ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ + ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ + cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64); + + octeon2_usb_clocks_stop(); +} + static int __init octeon_ohci_device_init(void) { struct platform_device *pd; @@ -137,7 +404,7 @@ static int __init octeon_ohci_device_init(void) if (octeon_is_simulation() || usb_disabled()) return 0; /* No USB in the simulator. */ - pd = platform_device_alloc("octeon-ohci", 0); + pd = platform_device_alloc("ohci-platform", 0); if (!pd) { ret = -ENOMEM; goto out; @@ -154,6 +421,9 @@ static int __init octeon_ohci_device_init(void) if (ret) goto fail; + pd->dev.platform_data = &octeon_ohci_pdata; + octeon_ohci_hw_start(); + ret = platform_device_add(pd); if (ret) goto fail; diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig index b2476a1c4aaa..e57058d4ec22 100644 --- a/arch/mips/configs/cavium_octeon_defconfig +++ b/arch/mips/configs/cavium_octeon_defconfig @@ -120,6 +120,9 @@ CONFIG_SPI_OCTEON=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_USB_SUPPORT is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_STAGING=y diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a3ca1375dd52..fafc628480e0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -292,11 +292,15 @@ config USB_EHCI_HCD_PLATFORM If unsure, say N. config USB_OCTEON_EHCI - bool "Octeon on-chip EHCI support" + bool "Octeon on-chip EHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC default n select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_HCD_PLATFORM help + This option is deprecated now and the driver was removed, use + USB_EHCI_HCD_PLATFORM instead. + Enable support for the Octeon II SOC's on-chip EHCI controller. It is needed for high-speed (480Mbit/sec) USB 2.0 device support. All CN6XXX based chips with USB are @@ -575,12 +579,16 @@ config USB_OHCI_HCD_PLATFORM If unsure, say N. config USB_OCTEON_OHCI - bool "Octeon on-chip OHCI support" + bool "Octeon on-chip OHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC default USB_OCTEON_EHCI select USB_OHCI_BIG_ENDIAN_MMIO select USB_OHCI_LITTLE_ENDIAN + select USB_OHCI_HCD_PLATFORM help + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enable support for the Octeon II SOC's on-chip OHCI controller. It is needed for low-speed USB 1.0 device support. All CN6XXX based chips with USB are supported. @@ -754,12 +762,6 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". - - -config USB_OCTEON2_COMMON - bool - default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI - config USB_HCD_BCMA tristate "BCMA usb host driver" depends on BCMA diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 348c24321562..d6216a493bab 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -73,7 +73,6 @@ obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o -obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index df75b8e7d157..38bfeedae1d0 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1275,11 +1275,6 @@ MODULE_LICENSE ("GPL"); #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif -#ifdef CONFIG_USB_OCTEON_EHCI -#include "ehci-octeon.c" -#define PLATFORM_DRIVER ehci_octeon_driver -#endif - #ifdef CONFIG_TILE_USB #include "ehci-tilegx.c" #define PLATFORM_DRIVER ehci_hcd_tilegx_driver diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c deleted file mode 100644 index 2d0c4bcba579..000000000000 --- a/drivers/usb/host/ehci-octeon.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * EHCI HCD glue for Cavium Octeon II SOCs. - * - * Loosely based on ehci-au1xxx.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2010 Cavium Networks - * - */ - -#include <linux/platform_device.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-uctlx-defs.h> - -#define OCTEON_EHCI_HCD_NAME "octeon-ehci" - -/* Common clock init code. */ -void octeon2_usb_clocks_start(void); -void octeon2_usb_clocks_stop(void); - -static void ehci_octeon_start(void) -{ - union cvmx_uctlx_ehci_ctl ehci_ctl; - - octeon2_usb_clocks_start(); - - ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0)); - /* Use 64-bit addressing. */ - ehci_ctl.s.ehci_64b_addr_en = 1; - ehci_ctl.s.l2c_addr_msb = 0; - ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ - ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ - cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64); -} - -static void ehci_octeon_stop(void) -{ - octeon2_usb_clocks_stop(); -} - -static const struct hc_driver ehci_octeon_hc_driver = { - .description = hcd_name, - .product_desc = "Octeon EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static u64 ehci_octeon_dma_mask = DMA_BIT_MASK(64); - -static int ehci_octeon_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct resource *res_mem; - int irq; - int ret; - - if (usb_disabled()) - return -ENODEV; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "No irq assigned\n"); - return -ENODEV; - } - - /* - * We can DMA from anywhere. But the descriptors must be in - * the lower 4GB. - */ - pdev->dev.dma_mask = &ehci_octeon_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - - hcd = usb_create_hcd(&ehci_octeon_hc_driver, &pdev->dev, "octeon"); - if (!hcd) - return -ENOMEM; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, res_mem); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); - goto err1; - } - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = resource_size(res_mem); - - ehci_octeon_start(); - - ehci = hcd_to_ehci(hcd); - - /* Octeon EHCI matches CPU endianness. */ -#ifdef __BIG_ENDIAN - ehci->big_endian_mmio = 1; -#endif - - ehci->caps = hcd->regs; - - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); - goto err2; - } - device_wakeup_enable(hcd->self.controller); - - platform_set_drvdata(pdev, hcd); - - return 0; -err2: - ehci_octeon_stop(); - -err1: - usb_put_hcd(hcd); - return ret; -} - -static int ehci_octeon_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - - ehci_octeon_stop(); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ehci_octeon_driver = { - .probe = ehci_octeon_drv_probe, - .remove = ehci_octeon_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = OCTEON_EHCI_HCD_NAME, - .owner = THIS_MODULE, - } -}; - -MODULE_ALIAS("platform:" OCTEON_EHCI_HCD_NAME); diff --git a/drivers/usb/host/octeon2-common.c b/drivers/usb/host/octeon2-common.c deleted file mode 100644 index d9df423f3d12..000000000000 --- a/drivers/usb/host/octeon2-common.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2010, 2011 Cavium Networks - */ - -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/delay.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-uctlx-defs.h> - -static DEFINE_MUTEX(octeon2_usb_clocks_mutex); - -static int octeon2_usb_clock_start_cnt; - -void octeon2_usb_clocks_start(void) -{ - u64 div; - union cvmx_uctlx_if_ena if_ena; - union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; - union cvmx_uctlx_uphy_ctl_status uphy_ctl_status; - union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status; - int i; - unsigned long io_clk_64_to_ns; - - - mutex_lock(&octeon2_usb_clocks_mutex); - - octeon2_usb_clock_start_cnt++; - if (octeon2_usb_clock_start_cnt != 1) - goto exit; - - io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate(); - - /* - * Step 1: Wait for voltages stable. That surely happened - * before starting the kernel. - * - * Step 2: Enable SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1 - */ - if_ena.u64 = 0; - if_ena.s.en = 1; - cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64); - - /* Step 3: Configure the reference clock, PHY, and HCLK */ - clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); - - /* - * If the UCTL looks like it has already been started, skip - * the initialization, otherwise bus errors are obtained. - */ - if (clk_rst_ctl.s.hrst) - goto end_clock; - /* 3a */ - clk_rst_ctl.s.p_por = 1; - clk_rst_ctl.s.hrst = 0; - clk_rst_ctl.s.p_prst = 0; - clk_rst_ctl.s.h_clkdiv_rst = 0; - clk_rst_ctl.s.o_clkdiv_rst = 0; - clk_rst_ctl.s.h_clkdiv_en = 0; - clk_rst_ctl.s.o_clkdiv_en = 0; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 3b */ - /* 12MHz crystal. */ - clk_rst_ctl.s.p_refclk_sel = 0; - clk_rst_ctl.s.p_refclk_div = 0; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 3c */ - div = octeon_get_io_clock_rate() / 130000000ull; - - switch (div) { - case 0: - div = 1; - break; - case 1: - case 2: - case 3: - case 4: - break; - case 5: - div = 4; - break; - case 6: - case 7: - div = 6; - break; - case 8: - case 9: - case 10: - case 11: - div = 8; - break; - default: - div = 12; - break; - } - clk_rst_ctl.s.h_div = div; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - /* Read it back, */ - clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); - clk_rst_ctl.s.h_clkdiv_en = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - /* 3d */ - clk_rst_ctl.s.h_clkdiv_rst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 3e: delay 64 io clocks */ - ndelay(io_clk_64_to_ns); - - /* - * Step 4: Program the power-on reset field in the UCTL - * clock-reset-control register. - */ - clk_rst_ctl.s.p_por = 0; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* Step 5: Wait 1 ms for the PHY clock to start. */ - mdelay(1); - - /* - * Step 6: Program the reset input from automatic test - * equipment field in the UPHY CSR - */ - uphy_ctl_status.u64 = cvmx_read_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0)); - uphy_ctl_status.s.ate_reset = 1; - cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); - - /* Step 7: Wait for at least 10ns. */ - ndelay(10); - - /* Step 8: Clear the ATE_RESET field in the UPHY CSR. */ - uphy_ctl_status.s.ate_reset = 0; - cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); - - /* - * Step 9: Wait for at least 20ns for UPHY to output PHY clock - * signals and OHCI_CLK48 - */ - ndelay(20); - - /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */ - /* 10a */ - clk_rst_ctl.s.o_clkdiv_rst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 10b */ - clk_rst_ctl.s.o_clkdiv_en = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 10c */ - ndelay(io_clk_64_to_ns); - - /* - * Step 11: Program the PHY reset field: - * UCTL0_CLK_RST_CTL[P_PRST] = 1 - */ - clk_rst_ctl.s.p_prst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* Step 12: Wait 1 uS. */ - udelay(1); - - /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */ - clk_rst_ctl.s.hrst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - -end_clock: - /* Now we can set some other registers. */ - - for (i = 0; i <= 1; i++) { - port_ctl_status.u64 = - cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0)); - /* Set txvreftune to 15 to obtain compliant 'eye' diagram. */ - port_ctl_status.s.txvreftune = 15; - port_ctl_status.s.txrisetune = 1; - port_ctl_status.s.txpreemphasistune = 1; - cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0), - port_ctl_status.u64); - } - - /* Set uSOF cycle period to 60,000 bits. */ - cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull); -exit: - mutex_unlock(&octeon2_usb_clocks_mutex); -} -EXPORT_SYMBOL(octeon2_usb_clocks_start); - -void octeon2_usb_clocks_stop(void) -{ - mutex_lock(&octeon2_usb_clocks_mutex); - octeon2_usb_clock_start_cnt--; - mutex_unlock(&octeon2_usb_clocks_mutex); -} -EXPORT_SYMBOL(octeon2_usb_clocks_stop); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index d664edabf14e..1dab9dfbca6a 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_jz4740_driver #endif -#ifdef CONFIG_USB_OCTEON_OHCI -#include "ohci-octeon.c" -#define PLATFORM_DRIVER ohci_octeon_driver -#endif - #ifdef CONFIG_TILE_USB #include "ohci-tilegx.c" #define PLATFORM_DRIVER ohci_hcd_tilegx_driver diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c deleted file mode 100644 index 20d861b6192f..000000000000 --- a/drivers/usb/host/ohci-octeon.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * EHCI HCD glue for Cavium Octeon II SOCs. - * - * Loosely based on ehci-au1xxx.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2010 Cavium Networks - * - */ - -#include <linux/platform_device.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-uctlx-defs.h> - -#define OCTEON_OHCI_HCD_NAME "octeon-ohci" - -/* Common clock init code. */ -void octeon2_usb_clocks_start(void); -void octeon2_usb_clocks_stop(void); - -static void ohci_octeon_hw_start(void) -{ - union cvmx_uctlx_ohci_ctl ohci_ctl; - - octeon2_usb_clocks_start(); - - ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0)); - ohci_ctl.s.l2c_addr_msb = 0; - ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ - ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ - cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64); - -} - -static void ohci_octeon_hw_stop(void) -{ - /* Undo ohci_octeon_start() */ - octeon2_usb_clocks_stop(); -} - -static int ohci_octeon_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - - if (ret < 0) - return ret; - - ret = ohci_run(ohci); - - if (ret < 0) { - ohci_err(ohci, "can't start %s", hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; -} - -static const struct hc_driver ohci_octeon_hc_driver = { - .description = hcd_name, - .product_desc = "Octeon OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_octeon_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, - - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_octeon_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ohci_hcd *ohci; - void *reg_base; - struct resource *res_mem; - int irq; - int ret; - - if (usb_disabled()) - return -ENODEV; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "No irq assigned\n"); - return -ENODEV; - } - - /* Ohci is a 32-bit device. */ - ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - - hcd = usb_create_hcd(&ohci_octeon_hc_driver, &pdev->dev, "octeon"); - if (!hcd) - return -ENOMEM; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - reg_base = devm_ioremap_resource(&pdev->dev, res_mem); - if (IS_ERR(reg_base)) { - ret = PTR_ERR(reg_base); - goto err1; - } - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = resource_size(res_mem); - - ohci_octeon_hw_start(); - - hcd->regs = reg_base; - - ohci = hcd_to_ohci(hcd); - - /* Octeon OHCI matches CPU endianness. */ -#ifdef __BIG_ENDIAN - ohci->flags |= OHCI_QUIRK_BE_MMIO; -#endif - - ohci_hcd_init(ohci); - - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); - goto err2; - } - - device_wakeup_enable(hcd->self.controller); - - platform_set_drvdata(pdev, hcd); - - return 0; - -err2: - ohci_octeon_hw_stop(); - -err1: - usb_put_hcd(hcd); - return ret; -} - -static int ohci_octeon_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - - ohci_octeon_hw_stop(); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ohci_octeon_driver = { - .probe = ohci_octeon_drv_probe, - .remove = ohci_octeon_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = OCTEON_OHCI_HCD_NAME, - .owner = THIS_MODULE, - } -}; - -MODULE_ALIAS("platform:" OCTEON_OHCI_HCD_NAME); |