diff options
| -rw-r--r-- | drivers/gpio/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-pmic-eic-sprd.c | 330 |
3 files changed, 339 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 380aa90501ea..7201cb508870 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -400,6 +400,14 @@ config GPIO_PL061 help Say yes here to support the PrimeCell PL061 GPIO device +config GPIO_PMIC_EIC_SPRD + tristate "Spreadtrum PMIC EIC support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say yes here to support Spreadtrum PMIC EIC device. + config GPIO_PXA bool "PXA GPIO support" depends on ARCH_PXA || ARCH_MMP diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 2437f3596934..684141a96c3f 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-pci-idio-16.o obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o +obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o diff --git a/drivers/gpio/gpio-pmic-eic-sprd.c b/drivers/gpio/gpio-pmic-eic-sprd.c new file mode 100644 index 000000000000..66d68d991162 --- /dev/null +++ b/drivers/gpio/gpio-pmic-eic-sprd.c @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Spreadtrum Communications Inc. + * Copyright (C) 2018 Linaro Ltd. + */ + +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* EIC registers definition */ +#define SPRD_PMIC_EIC_DATA 0x0 +#define SPRD_PMIC_EIC_DMSK 0x4 +#define SPRD_PMIC_EIC_IEV 0x14 +#define SPRD_PMIC_EIC_IE 0x18 +#define SPRD_PMIC_EIC_RIS 0x1c +#define SPRD_PMIC_EIC_MIS 0x20 +#define SPRD_PMIC_EIC_IC 0x24 +#define SPRD_PMIC_EIC_TRIG 0x28 +#define SPRD_PMIC_EIC_CTRL0 0x40 + +/* + * The PMIC EIC controller only has one bank, and each bank now can contain + * 16 EICs. + */ +#define SPRD_PMIC_EIC_PER_BANK_NR 16 +#define SPRD_PMIC_EIC_NR SPRD_PMIC_EIC_PER_BANK_NR +#define SPRD_PMIC_EIC_DATA_MASK GENMASK(15, 0) +#define SPRD_PMIC_EIC_BIT(x) ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1)) +#define SPRD_PMIC_EIC_DBNC_MASK GENMASK(11, 0) + +/* + * These registers are modified under the irq bus lock and cached to avoid + * unnecessary writes in bus_sync_unlock. + */ +enum { + REG_IEV, + REG_IE, + REG_TRIG, + CACHE_NR_REGS +}; + +/** + * struct sprd_pmic_eic - PMIC EIC controller + * @chip: the gpio_chip structure. + * @intc: the irq_chip structure. + * @regmap: the regmap from the parent device. + * @offset: the EIC controller's offset address of the PMIC. + * @reg: the array to cache the EIC registers. + * @buslock: for bus lock/sync and unlock. + * @irq: the interrupt number of the PMIC EIC conteroller. + */ +struct sprd_pmic_eic { + struct gpio_chip chip; + struct irq_chip intc; + struct regmap *map; + u32 offset; + u8 reg[CACHE_NR_REGS]; + struct mutex buslock; + int irq; +}; + +static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset, + u16 reg, unsigned int val) +{ + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 shift = SPRD_PMIC_EIC_BIT(offset); + + regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg, + BIT(shift), val << shift); +} + +static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset, + u16 reg) +{ + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 value; + int ret; + + ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); + if (ret) + return ret; + + return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset))); +} + +static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset) +{ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1); + return 0; +} + +static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset) +{ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0); +} + +static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset) +{ + return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA); +} + +static int sprd_pmic_eic_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + /* EICs are always input, nothing need to do here. */ + return 0; +} + +static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + /* EICs are always input, nothing need to do here. */ +} + +static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip, + unsigned int offset, + unsigned int debounce) +{ + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 reg, value; + int ret; + + reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4; + ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value); + if (ret) + return ret; + + value &= ~SPRD_PMIC_EIC_DBNC_MASK; + value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK; + return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value); +} + +static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + unsigned long param = pinconf_to_config_param(config); + u32 arg = pinconf_to_config_argument(config); + + if (param == PIN_CONFIG_INPUT_DEBOUNCE) + return sprd_pmic_eic_set_debounce(chip, offset, arg); + + return -ENOTSUPP; +} + +static void sprd_pmic_eic_irq_mask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + pmic_eic->reg[REG_IE] = 0; + pmic_eic->reg[REG_TRIG] = 0; +} + +static void sprd_pmic_eic_irq_unmask(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + pmic_eic->reg[REG_IE] = 1; + pmic_eic->reg[REG_TRIG] = 1; +} + +static int sprd_pmic_eic_irq_set_type(struct irq_data *data, + unsigned int flow_type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + switch (flow_type) { + case IRQ_TYPE_LEVEL_HIGH: + pmic_eic->reg[REG_IEV] = 1; + break; + case IRQ_TYPE_LEVEL_LOW: + pmic_eic->reg[REG_IEV] = 0; + break; + default: + return -ENOTSUPP; + } + + return 0; +} + +static void sprd_pmic_eic_bus_lock(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + + mutex_lock(&pmic_eic->buslock); +} + +static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip); + u32 offset = irqd_to_hwirq(data); + + /* Set irq type */ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, + pmic_eic->reg[REG_IEV]); + /* Set irq unmask */ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, + pmic_eic->reg[REG_IE]); + /* Generate trigger start pulse for debounce EIC */ + sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, + pmic_eic->reg[REG_TRIG]); + + mutex_unlock(&pmic_eic->buslock); +} + +static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data) +{ + struct sprd_pmic_eic *pmic_eic = data; + struct gpio_chip *chip = &pmic_eic->chip; + unsigned long status; + u32 n, girq, val; + int ret; + + ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS, + &val); + if (ret) + return IRQ_RETVAL(ret); + + status = val & SPRD_PMIC_EIC_DATA_MASK; + + for_each_set_bit(n, &status, chip->ngpio) { + /* Clear the interrupt */ + sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1); + + girq = irq_find_mapping(chip->irq.domain, n); + handle_nested_irq(girq); + } + + return IRQ_HANDLED; +} + +static int sprd_pmic_eic_probe(struct platform_device *pdev) +{ + struct gpio_irq_chip *irq; + struct sprd_pmic_eic *pmic_eic; + int ret; + + pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL); + if (!pmic_eic) + return -ENOMEM; + + mutex_init(&pmic_eic->buslock); + + pmic_eic->irq = platform_get_irq(pdev, 0); + if (pmic_eic->irq < 0) { + dev_err(&pdev->dev, "Failed to get PMIC EIC interrupt.\n"); + return pmic_eic->irq; + } + + pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL); + if (!pmic_eic->map) + return -ENODEV; + + ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset); + if (ret) { + dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n"); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL, + sprd_pmic_eic_irq_handler, + IRQF_TRIGGER_LOW | + IRQF_ONESHOT | IRQF_NO_SUSPEND, + dev_name(&pdev->dev), pmic_eic); + if (ret) { + dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n"); + return ret; + } + + pmic_eic->chip.label = dev_name(&pdev->dev); + pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR; + pmic_eic->chip.base = -1; + pmic_eic->chip.parent = &pdev->dev; + pmic_eic->chip.of_node = pdev->dev.of_node; + pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input; + pmic_eic->chip.request = sprd_pmic_eic_request; + pmic_eic->chip.free = sprd_pmic_eic_free; + pmic_eic->chip.set_config = sprd_pmic_eic_set_config; + pmic_eic->chip.set = sprd_pmic_eic_set; + pmic_eic->chip.get = sprd_pmic_eic_get; + + pmic_eic->intc.name = dev_name(&pdev->dev); + pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask; + pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask; + pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type; + pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock; + pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock; + pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE; + + irq = &pmic_eic->chip.irq; + irq->chip = &pmic_eic->intc; + irq->threaded = true; + + ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic); + if (ret < 0) { + dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret); + return ret; + } + + platform_set_drvdata(pdev, pmic_eic); + return 0; +} + +static const struct of_device_id sprd_pmic_eic_of_match[] = { + { .compatible = "sprd,sc27xx-eic", }, + { /* end of list */ } +}; +MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match); + +static struct platform_driver sprd_pmic_eic_driver = { + .probe = sprd_pmic_eic_probe, + .driver = { + .name = "sprd-pmic-eic", + .of_match_table = sprd_pmic_eic_of_match, + }, +}; + +module_platform_driver(sprd_pmic_eic_driver); + +MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver"); +MODULE_LICENSE("GPL v2"); |