summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/debugfs-driver-dcc127
-rw-r--r--Documentation/ABI/testing/debugfs-scmi70
-rw-r--r--Documentation/ABI/testing/debugfs-scmi-raw117
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml4
-rw-r--r--Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml39
-rw-r--r--Documentation/devicetree/bindings/firmware/meson/meson_sm.txt15
-rw-r--r--Documentation/devicetree/bindings/firmware/qcom,scm.yaml68
-rw-r--r--Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml1
-rw-r--r--Documentation/devicetree/bindings/leds/leds-mt6323.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml111
-rw-r--r--Documentation/devicetree/bindings/mfd/mt6397.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/qcom-rpm.txt283
-rw-r--r--Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml5
-rw-r--r--Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml11
-rw-r--r--Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml54
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt4
-rw-r--r--Documentation/devicetree/bindings/power/mediatek,power-controller.yaml2
-rw-r--r--Documentation/devicetree/bindings/power/qcom,rpmpd.yaml2
-rw-r--r--Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml45
-rw-r--r--Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml6
-rw-r--r--Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml9
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml147
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/pwrap.txt75
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml44
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml36
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml95
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml101
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml3
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml1
-rw-r--r--MAINTAINERS16
-rw-r--r--arch/arm/mach-qcom/platsmp.c2
-rw-r--r--drivers/bus/imx-weim.c4
-rw-r--r--drivers/cpuidle/cpuidle-qcom-spm.c2
-rw-r--r--drivers/firmware/arm_scmi/Kconfig32
-rw-r--r--drivers/firmware/arm_scmi/Makefile9
-rw-r--r--drivers/firmware/arm_scmi/bus.c395
-rw-r--r--drivers/firmware/arm_scmi/common.h100
-rw-r--r--drivers/firmware/arm_scmi/driver.c1223
-rw-r--r--drivers/firmware/arm_scmi/mailbox.c6
-rw-r--r--drivers/firmware/arm_scmi/optee.c6
-rw-r--r--drivers/firmware/arm_scmi/protocols.h7
-rw-r--r--drivers/firmware/arm_scmi/raw_mode.c1443
-rw-r--r--drivers/firmware/arm_scmi/raw_mode.h31
-rw-r--r--drivers/firmware/arm_scmi/smc.c6
-rw-r--r--drivers/firmware/arm_scmi/virtio.c4
-rw-r--r--drivers/firmware/meson/meson_sm.c2
-rw-r--r--drivers/firmware/qcom_scm-legacy.c2
-rw-r--r--drivers/firmware/qcom_scm-smc.c88
-rw-r--r--drivers/firmware/qcom_scm.c92
-rw-r--r--drivers/firmware/qcom_scm.h8
-rw-r--r--drivers/firmware/xilinx/zynqmp.c27
-rw-r--r--drivers/gpu/drm/msm/adreno/a5xx_gpu.c2
-rw-r--r--drivers/gpu/drm/msm/adreno/adreno_gpu.c2
-rw-r--r--drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c2
-rw-r--r--drivers/input/keyboard/mtk-pmic-keys.c17
-rw-r--r--drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c2
-rw-r--r--drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c2
-rw-r--r--drivers/iommu/arm/arm-smmu/qcom_iommu.c2
-rw-r--r--drivers/media/platform/qcom/venus/firmware.c2
-rw-r--r--drivers/memory/renesas-rpc-if.c155
-rw-r--r--drivers/memory/ti-emif-pm.c7
-rw-r--r--drivers/misc/fastrpc.c2
-rw-r--r--drivers/mmc/host/sdhci-msm.c2
-rw-r--r--drivers/mtd/hyperbus/rpc-if.c18
-rw-r--r--drivers/net/ipa/ipa_main.c2
-rw-r--r--drivers/net/wireless/ath/ath10k/qmi.c2
-rw-r--r--drivers/phy/samsung/phy-exynos-dp-video.c7
-rw-r--r--drivers/phy/samsung/phy-exynos-mipi-video.c7
-rw-r--r--drivers/pinctrl/qcom/pinctrl-msm.c2
-rw-r--r--drivers/power/supply/Kconfig9
-rw-r--r--drivers/power/supply/Makefile1
-rw-r--r--drivers/power/supply/qcom_battmgr.c1411
-rw-r--r--drivers/remoteproc/qcom_q6v5_mss.c2
-rw-r--r--drivers/remoteproc/qcom_q6v5_pas.c2
-rw-r--r--drivers/remoteproc/qcom_wcnss.c2
-rw-r--r--drivers/soc/Kconfig2
-rw-r--r--drivers/soc/Makefile4
-rw-r--r--drivers/soc/amlogic/meson-ee-pwrc.c17
-rw-r--r--drivers/soc/apple/apple-pmgr-pwrstate.c11
-rw-r--r--drivers/soc/apple/rtkit-crashlog.c93
-rw-r--r--drivers/soc/apple/rtkit.c36
-rw-r--r--drivers/soc/bcm/bcm2835-power.c6
-rw-r--r--drivers/soc/imx/Kconfig11
-rw-r--r--drivers/soc/imx/Makefile6
-rw-r--r--drivers/soc/imx/imx8m-blk-ctrl.c27
-rw-r--r--drivers/soc/imx/imx8mp-blk-ctrl.c108
-rw-r--r--drivers/soc/imx/imx93-pd.c1
-rw-r--r--drivers/soc/imx/imx93-src.c1
-rw-r--r--drivers/soc/mediatek/Kconfig7
-rw-r--r--drivers/soc/mediatek/Makefile1
-rw-r--r--drivers/soc/mediatek/mt8186-pm-domains.h4
-rw-r--r--drivers/soc/mediatek/mt8188-mmsys.h149
-rw-r--r--drivers/soc/mediatek/mt8188-pm-domains.h623
-rw-r--r--drivers/soc/mediatek/mt8195-mmsys.h146
-rw-r--r--drivers/soc/mediatek/mtk-devapc.c11
-rw-r--r--drivers/soc/mediatek/mtk-mmsys.c200
-rw-r--r--drivers/soc/mediatek/mtk-mmsys.h2
-rw-r--r--drivers/soc/mediatek/mtk-mutex.c113
-rw-r--r--drivers/soc/mediatek/mtk-pm-domains.c13
-rw-r--r--drivers/soc/mediatek/mtk-pm-domains.h5
-rw-r--r--drivers/soc/mediatek/mtk-regulator-coupler.c159
-rw-r--r--drivers/soc/mediatek/mtk-svs.c155
-rw-r--r--drivers/soc/nuvoton/Kconfig11
-rw-r--r--drivers/soc/nuvoton/Makefile2
-rw-r--r--drivers/soc/nuvoton/wpcm450-soc.c109
-rw-r--r--drivers/soc/qcom/Kconfig27
-rw-r--r--drivers/soc/qcom/Makefile3
-rw-r--r--drivers/soc/qcom/mdt_loader.c2
-rw-r--r--drivers/soc/qcom/ocmem.c2
-rw-r--r--drivers/soc/qcom/pmic_glink.c336
-rw-r--r--drivers/soc/qcom/pmic_glink_altmode.c478
-rw-r--r--drivers/soc/qcom/qcom_stats.c10
-rw-r--r--drivers/soc/qcom/ramp_controller.c343
-rw-r--r--drivers/soc/qcom/rmtfs_mem.c31
-rw-r--r--drivers/soc/qcom/rpmhpd.c34
-rw-r--r--drivers/soc/qcom/rpmpd.c18
-rw-r--r--drivers/soc/qcom/smd-rpm.c1
-rw-r--r--drivers/soc/qcom/socinfo.c112
-rw-r--r--drivers/soc/renesas/Kconfig4
-rw-r--r--drivers/soc/renesas/Makefile1
-rw-r--r--drivers/soc/renesas/pwc-rzv2m.c141
-rw-r--r--drivers/soc/renesas/r8a779g0-sysc.c1
-rw-r--r--drivers/soc/sifive/Kconfig2
-rw-r--r--drivers/soc/starfive/Kconfig12
-rw-r--r--drivers/soc/starfive/Makefile3
-rw-r--r--drivers/soc/starfive/jh71xx_pmu.c383
-rw-r--r--drivers/soc/sunxi/Kconfig9
-rw-r--r--drivers/soc/sunxi/Makefile1
-rw-r--r--drivers/soc/sunxi/sun20i-ppu.c207
-rw-r--r--drivers/soc/sunxi/sunxi_sram.c3
-rw-r--r--drivers/soc/xilinx/xlnx_event_manager.c4
-rw-r--r--drivers/soc/xilinx/zynqmp_pm_domains.c2
-rw-r--r--drivers/spi/spi-rpc-if.c14
-rw-r--r--drivers/thermal/qcom/lmh.c2
-rw-r--r--drivers/ufs/host/ufs-qcom-ice.c2
-rw-r--r--fs/debugfs/file.c1
-rw-r--r--include/dt-bindings/arm/qcom,ids.h83
-rw-r--r--include/dt-bindings/firmware/qcom,scm.h16
-rw-r--r--include/dt-bindings/power/allwinner,sun20i-d1-ppu.h10
-rw-r--r--include/dt-bindings/power/mediatek,mt8188-power.h44
-rw-r--r--include/dt-bindings/power/qcom-rpmpd.h30
-rw-r--r--include/dt-bindings/power/r8a779g0-sysc.h1
-rw-r--r--include/dt-bindings/power/starfive,jh7110-pmu.h17
-rw-r--r--include/dt-bindings/reset/mt8195-resets.h45
-rw-r--r--include/linux/firmware/qcom/qcom_scm.h (renamed from include/linux/qcom_scm.h)6
-rw-r--r--include/linux/firmware/xlnx-zynqmp.h4
-rw-r--r--include/linux/scmi_protocol.h5
-rw-r--r--include/linux/soc/apple/rtkit.h26
-rw-r--r--include/linux/soc/mediatek/infracfg.h121
-rw-r--r--include/linux/soc/mediatek/mtk-mmsys.h25
-rw-r--r--include/linux/soc/qcom/apr.h2
-rw-r--r--include/linux/soc/qcom/pmic_glink.h32
-rw-r--r--include/memory/renesas-rpc-if.h34
-rw-r--r--include/trace/events/scmi.h18
-rw-r--r--sound/soc/qcom/qdsp6/q6core.c4
156 files changed, 10055 insertions, 1337 deletions
diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc
new file mode 100644
index 000000000000..27ed5919d21b
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-dcc
@@ -0,0 +1,127 @@
+What: /sys/kernel/debug/dcc/.../ready
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This file is used to check the status of the dcc
+ hardware if it's ready to receive user configurations.
+ A 'Y' here indicates dcc is ready.
+
+What: /sys/kernel/debug/dcc/.../trigger
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This is the debugfs interface for manual software
+ triggers. The trigger can be invoked by writing '1'
+ to the file.
+
+What: /sys/kernel/debug/dcc/.../config_reset
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This file is used to reset the configuration of
+ a dcc driver to the default configuration. When '1'
+ is written to the file, all the previous addresses
+ stored in the driver gets removed and users need to
+ reconfigure addresses again.
+
+What: /sys/kernel/debug/dcc/.../[list-number]/config
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This stores the addresses of the registers which
+ can be read in case of a hardware crash or manual
+ software triggers. The input addresses type
+ can be one of following dcc instructions: read,
+ write, read-write, and loop type. The lists need to
+ be configured sequentially and not in a overlapping
+ manner; e.g. users can jump to list x only after
+ list y is configured and enabled. The input format for
+ each type is as follows:
+
+ i) Read instruction
+
+ ::
+
+ echo R <addr> <n> <bus> >/sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <addr>
+ The address to be read.
+
+ <n>
+ The addresses word count, starting from address <1>.
+ Each word is 32 bits (4 bytes). If omitted, defaulted
+ to 1.
+
+ <bus type>
+ The bus type, which can be either 'apb' or 'ahb'.
+ The default is 'ahb' if leaved out.
+
+ ii) Write instruction
+
+ ::
+
+ echo W <addr> <n> <bus type> > /sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <addr>
+ The address to be written.
+
+ <n>
+ The value to be written at <addr>.
+
+ <bus type>
+ The bus type, which can be either 'apb' or 'ahb'.
+
+ iii) Read-write instruction
+
+ ::
+
+ echo RW <addr> <n> <mask> > /sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <addr>
+ The address to be read and written.
+
+ <n>
+ The value to be written at <addr>.
+
+ <mask>
+ The value mask.
+
+ iv) Loop instruction
+
+ ::
+
+ echo L <loop count> <address count> <address>... > /sys/kernel/debug/dcc/../[list-number]/config
+
+ where:
+
+ <loop count>
+ Number of iterations
+
+ <address count>
+ total number of addresses to be written
+
+ <address>
+ Space-separated list of addresses.
+
+What: /sys/kernel/debug/dcc/.../[list-number]/enable
+Date: December 2022
+Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+ This debugfs interface is used for enabling the
+ the dcc hardware. A file named "enable" is in the
+ directory list number where users can enable/disable
+ the specific list by writing boolean (1 or 0) to the
+ file.
+
+ On enabling the dcc, all the addresses specified
+ by the user for the corresponding list is written
+ into dcc sram which is read by the dcc hardware
+ on manual or crash induced triggers. Lists must
+ be configured and enabled sequentially, e.g. list
+ 2 can only be enabled when list 1 have so.
diff --git a/Documentation/ABI/testing/debugfs-scmi b/Documentation/ABI/testing/debugfs-scmi
new file mode 100644
index 000000000000..ee7179ab2edf
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-scmi
@@ -0,0 +1,70 @@
+What: /sys/kernel/debug/scmi/<n>/instance_name
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: The name of the underlying SCMI instance <n> described by
+ all the debugfs accessors rooted at /sys/kernel/debug/scmi/<n>,
+ expressed as the full name of the top DT SCMI node under which
+ this SCMI instance is rooted.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/atomic_threshold_us
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: An optional time value, expressed in microseconds, representing,
+ on this SCMI instance <n>, the threshold above which any SCMI
+ command, advertised to have an higher-than-threshold execution
+ latency, should not be considered for atomic mode of operation,
+ even if requested.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/type
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: A string representing the type of transport configured for this
+ SCMI instance <n>.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/is_atomic
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: A boolean stating if the transport configured on the underlying
+ SCMI instance <n> is capable of atomic mode of operation.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/max_rx_timeout_ms
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Timeout in milliseconds allowed for SCMI synchronous replies
+ for the currently configured SCMI transport for instance <n>.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/max_msg_size
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Max message size of allowed SCMI messages for the currently
+ configured SCMI transport for instance <n>.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/tx_max_msg
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Max number of concurrently allowed in-flight SCMI messages for
+ the currently configured SCMI transport for instance <n> on the
+ TX channels.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/transport/rx_max_msg
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: Max number of concurrently allowed in-flight SCMI messages for
+ the currently configured SCMI transport for instance <n> on the
+ RX channels.
+Users: Debugging, any userspace test suite
diff --git a/Documentation/ABI/testing/debugfs-scmi-raw b/Documentation/ABI/testing/debugfs-scmi-raw
new file mode 100644
index 000000000000..97678cc9535c
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-scmi-raw
@@ -0,0 +1,117 @@
+What: /sys/kernel/debug/scmi/<n>/raw/message
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw synchronous message injection/snooping facility; write
+ a complete SCMI synchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n>.
+ Any subsequently received response can be read from this same
+ entry if it arrived within the configured timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/message_async
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw asynchronous message injection/snooping facility; write
+ a complete SCMI asynchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n>.
+ Any subsequently received response can be read from this same
+ entry if it arrived within the configured timeout.
+ Any additional delayed response received afterwards can be read
+ from this same entry too if it arrived within the configured
+ timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/errors
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw message errors facility; any kind of timed-out or
+ generally unexpectedly received SCMI message, for instance <n>,
+ can be read from this entry.
+ Each read gives back one message at time (receiving an EOF at
+ each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/notification
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw notification snooping facility; any notification
+ emitted by the backend SCMI server, for instance <n>, can be
+ read from this entry.
+ Each read gives back one message at time (receiving an EOF at
+ each message boundary).
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/reset
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw stack reset facility; writing a value to this entry
+ causes the internal queues of any kind of received message,
+ still pending to be read out for instance <n>, to be immediately
+ flushed.
+ Can be used to reset and clean the SCMI Raw stack between to
+ different test-run.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/channels/<m>/message
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw synchronous message injection/snooping facility; write
+ a complete SCMI synchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n> through the <m> transport
+ channel.
+ Any subsequently received response can be read from this same
+ entry if it arrived on channel <m> within the configured
+ timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+ Channel identifier <m> matches the SCMI protocol number which
+ has been associated with this transport channel in the DT
+ description, with base protocol number 0x10 being the default
+ channel for this instance.
+ Note that these per-channel entries rooted at <..>/channels
+ exist only if the transport is configured to have more than
+ one default channel.
+Users: Debugging, any userspace test suite
+
+What: /sys/kernel/debug/scmi/<n>/raw/channels/<m>/message_async
+Date: March 2023
+KernelVersion: 6.3
+Contact: cristian.marussi@arm.com
+Description: SCMI Raw asynchronous message injection/snooping facility; write
+ a complete SCMI asynchronous command message (header included)
+ in little-endian binary format to have it sent to the configured
+ backend SCMI server for instance <n> through the <m> transport
+ channel.
+ Any subsequently received response can be read from this same
+ entry if it arrived on channel <m> within the configured
+ timeout.
+ Any additional delayed response received afterwards can be read
+ from this same entry too if it arrived within the configured
+ timeout.
+ Each write to the entry causes one command request to be built
+ and sent while the replies are read back one message at time
+ (receiving an EOF at each message boundary).
+ Channel identifier <m> matches the SCMI protocol number which
+ has been associated with this transport channel in the DT
+ description, with base protocol number 0x10 being the default
+ channel for this instance.
+ Note that these per-channel entries rooted at <..>/channels
+ exist only if the transport is configured to have more than
+ one default channel.
+Users: Debugging, any userspace test suite
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 0711f1834fbd..d1410345ef18 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -31,7 +31,11 @@ properties:
- mediatek,mt8173-mmsys
- mediatek,mt8183-mmsys
- mediatek,mt8186-mmsys
+ - mediatek,mt8188-vdosys0
- mediatek,mt8192-mmsys
+ - mediatek,mt8195-vdosys1
+ - mediatek,mt8195-vppsys0
+ - mediatek,mt8195-vppsys1
- mediatek,mt8365-mmsys
- const: syscon
diff --git a/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
new file mode 100644
index 000000000000..8f50e698760e
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/amlogic,meson-gxbb-sm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Secure Monitor (SM)
+
+description:
+ In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+ NVMEM, enable JTAG, set USB boot, etc...
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: amlogic,meson-gxbb-sm
+ - items:
+ - const: amlogic,meson-gx-sm
+ - const: amlogic,meson-gxbb-sm
+
+ power-controller:
+ type: object
+ $ref: /schemas/power/amlogic,meson-sec-pwrc.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ firmware {
+ secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
deleted file mode 100644
index c248cd44f727..000000000000
--- a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* Amlogic Secure Monitor
-
-In the Amlogic SoCs the Secure Monitor code is used to provide access to the
-NVMEM, enable JTAG, set USB boot, etc...
-
-Required properties for the secure monitor node:
-- compatible: Should be "amlogic,meson-gxbb-sm"
-
-Example:
-
- firmware {
- sm: secure-monitor {
- compatible = "amlogic,meson-gxbb-sm";
- };
- };
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 25688571ee7c..a66e99812b1f 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -38,6 +38,8 @@ properties:
- qcom,scm-msm8994
- qcom,scm-msm8996
- qcom,scm-msm8998
+ - qcom,scm-qdu1000
+ - qcom,scm-sa8775p
- qcom,scm-sc7180
- qcom,scm-sc7280
- qcom,scm-sc8280xp
@@ -53,6 +55,7 @@ properties:
- qcom,scm-sm8250
- qcom,scm-sm8350
- qcom,scm-sm8450
+ - qcom,scm-sm8550
- qcom,scm-qcs404
- const: qcom,scm
@@ -73,6 +76,12 @@ properties:
'#reset-cells':
const: 1
+ interrupts:
+ description:
+ The wait-queue interrupt that firmware raises as part of handshake
+ protocol to handle sleeping SCM calls.
+ maxItems: 1
+
qcom,dload-mode:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
@@ -82,6 +91,32 @@ properties:
description: TCSR hardware block
allOf:
+ # Clocks
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,scm-apq8064
+ - qcom,scm-apq8084
+ - qcom,scm-mdm9607
+ - qcom,scm-msm8226
+ - qcom,scm-msm8660
+ - qcom,scm-msm8916
+ - qcom,scm-msm8953
+ - qcom,scm-msm8960
+ - qcom,scm-msm8974
+ - qcom,scm-msm8976
+ - qcom,scm-sm6375
+ then:
+ required:
+ - clocks
+ - clock-names
+ else:
+ properties:
+ clock-names: false
+ clocks: false
+
- if:
properties:
compatible:
@@ -100,10 +135,6 @@ allOf:
clocks:
maxItems: 1
- required:
- - clocks
- - clock-names
-
- if:
properties:
compatible:
@@ -111,6 +142,7 @@ allOf:
enum:
- qcom,scm-apq8084
- qcom,scm-mdm9607
+ - qcom,scm-msm8226
- qcom,scm-msm8916
- qcom,scm-msm8953
- qcom,scm-msm8974
@@ -127,9 +159,31 @@ allOf:
minItems: 3
maxItems: 3
- required:
- - clocks
- - clock-names
+ # Interconnects
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,scm-sm8450
+ - qcom,scm-sm8550
+ then:
+ properties:
+ interconnects: false
+
+ # Interrupts
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,scm-sm8450
+ - qcom,scm-sm8550
+ then:
+ properties:
+ interrupts: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
index 2f72ec418415..037c3ae9f1c3 100644
--- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -26,6 +26,7 @@ properties:
enum:
- mediatek,mt6323-keys
- mediatek,mt6331-keys
+ - mediatek,mt6357-keys
- mediatek,mt6358-keys
- mediatek,mt6397-keys
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
index 45bf9f7d85f3..73353692efa1 100644
--- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -9,7 +9,7 @@ MT6323 PMIC hardware.
For MT6323 MFD bindings see:
Documentation/devicetree/bindings/mfd/mt6397.txt
For MediaTek PMIC wrapper bindings see:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
Required properties:
- compatible : Must be "mediatek,mt6323-led"
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
new file mode 100644
index 000000000000..837a77013d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6357 PMIC
+
+maintainers:
+ - Flora Fu <flora.fu@mediatek.com>
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+ MT6357 is a power management system chip containing 5 buck
+ converters and 29 LDOs. Supported features are audio codec,
+ USB battery charging, fuel gauge, RTC
+
+ This is a multifunction device with the following sub modules:
+ - Regulator
+ - RTC
+ - Keys
+
+ It is interfaced to host controller using SPI interface by a proprietary hardware
+ called PMIC wrapper or pwrap. This MFD is a child device of pwrap.
+ See the following for pwrap node definitions:
+ Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+
+properties:
+ compatible:
+ const: mediatek,mt6357
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ regulators:
+ type: object
+ $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
+ description:
+ List of MT6357 BUCKs and LDOs regulators.
+
+ rtc:
+ type: object
+ $ref: /schemas/rtc/rtc.yaml#
+ description:
+ MT6357 Real Time Clock.
+ properties:
+ compatible:
+ const: mediatek,mt6357-rtc
+ start-year: true
+ required:
+ - compatible
+
+ keys:
+ type: object
+ $ref: /schemas/input/mediatek,pmic-keys.yaml
+ description:
+ MT6357 power and home keys.
+
+required:
+ - compatible
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pwrap {
+ pmic {
+ compatible = "mediatek,mt6357";
+
+ interrupt-parent = <&pio>;
+ interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ mt6357_vproc_reg: buck-vproc {
+ regulator-name = "vproc";
+ regulator-min-microvolt = <518750>;
+ regulator-max-microvolt = <1312500>;
+ regulator-ramp-delay = <6250>;
+ regulator-enable-ramp-delay = <220>;
+ regulator-always-on;
+ };
+
+ // ...
+
+ mt6357_vusb33_reg: ldo-vusb33 {
+ regulator-name = "vusb33";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-enable-ramp-delay = <264>;
+ };
+ };
+
+ rtc {
+ compatible = "mediatek,mt6357-rtc";
+ };
+
+ keys {
+ compatible = "mediatek,mt6357-keys";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 518986c44880..294693a8906c 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
See the following for pwarp node definitions:
-../soc/mediatek/pwrap.txt
+../soc/mediatek/mediatek,pwrap.yaml
This document describes the binding for MFD device and its sub module.
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
deleted file mode 100644
index b823b8625243..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ /dev/null
@@ -1,283 +0,0 @@
-Qualcomm Resource Power Manager (RPM)
-
-This driver is used to interface with the Resource Power Manager (RPM) found in
-various Qualcomm platforms. The RPM allows each component in the system to vote
-for state of the system resources, such as clocks, regulators and bus
-frequencies.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,rpm-apq8064"
- "qcom,rpm-msm8660"
- "qcom,rpm-msm8960"
- "qcom,rpm-ipq8064"
- "qcom,rpm-mdm9615"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: base address and size of the RPM's message ram
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: three entries specifying the RPM's:
- 1. acknowledgement interrupt
- 2. error interrupt
- 3. wakeup interrupt
-
-- interrupt-names:
- Usage: required
- Value type: <string-array>
- Definition: must be the three strings "ack", "err" and "wakeup", in order
-
-- qcom,ipc:
- Usage: required
- Value type: <prop-encoded-array>
-
- Definition: three entries specifying the outgoing ipc bit used for
- signaling the RPM:
- - phandle to a syscon node representing the apcs registers
- - u32 representing offset to the register within the syscon
- - u32 representing the ipc bit within the register
-
-
-= SUBNODES
-
-The RPM exposes resources to its subnodes. The below bindings specify the set
-of valid subnodes that can operate on these resources.
-
-== Regulators
-
-Regulator nodes are identified by their compatible:
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,rpm-pm8058-regulators"
- "qcom,rpm-pm8901-regulators"
- "qcom,rpm-pm8921-regulators"
- "qcom,rpm-pm8018-regulators"
- "qcom,rpm-smb208-regulators"
-
-- vdd_l0_l1_lvs-supply:
-- vdd_l2_l11_l12-supply:
-- vdd_l3_l4_l5-supply:
-- vdd_l6_l7-supply:
-- vdd_l8-supply:
-- vdd_l9-supply:
-- vdd_l10-supply:
-- vdd_l13_l16-supply:
-- vdd_l14_l15-supply:
-- vdd_l17_l18-supply:
-- vdd_l19_l20-supply:
-- vdd_l21-supply:
-- vdd_l22-supply:
-- vdd_l23_l24_l25-supply:
-- vdd_ncp-supply:
-- vdd_s0-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
- Usage: optional (pm8058 only)
- Value type: <phandle>
- Definition: reference to regulator supplying the input pin, as
- described in the data sheet
-
-- lvs0_in-supply:
-- lvs1_in-supply:
-- lvs2_in-supply:
-- lvs3_in-supply:
-- mvs_in-supply:
-- vdd_l0-supply:
-- vdd_l1-supply:
-- vdd_l2-supply:
-- vdd_l3-supply:
-- vdd_l4-supply:
-- vdd_l5-supply:
-- vdd_l6-supply:
-- vdd_s0-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
- Usage: optional (pm8901 only)
- Value type: <phandle>
- Definition: reference to regulator supplying the input pin, as
- described in the data sheet
-
-- vdd_l1_l2_l12_l18-supply:
-- vdd_l3_l15_l17-supply:
-- vdd_l4_l14-supply:
-- vdd_l5_l8_l16-supply:
-- vdd_l6_l7-supply:
-- vdd_l9_l11-supply:
-- vdd_l10_l22-supply:
-- vdd_l21_l23_l29-supply:
-- vdd_l24-supply:
-- vdd_l25-supply:
-- vdd_l26-supply:
-- vdd_l27-supply:
-- vdd_l28-supply:
-- vdd_ncp-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vin_5vs-supply:
-- vin_lvs1_3_6-supply:
-- vin_lvs2-supply:
-- vin_lvs4_5_7-supply:
- Usage: optional (pm8921 only)
- Value type: <phandle>
- Definition: reference to regulator supplying the input pin, as
- described in the data sheet
-
-- vin_lvs1-supply:
-- vdd_l7-supply:
-- vdd_l8-supply:
-- vdd_l9_l10_l11_l12-supply:
- Usage: optional (pm8018 only)
- Value type: <phandle>
- Definition: reference to regulator supplying the input pin, as
- described in the data sheet
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the pmics below.
-
-pm8058:
- l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
- l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
- lvs0, lvs1, ncp
-
-pm8901:
- l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
- mvs
-
-pm8921:
- s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
- l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
- l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
- ncp
-
-pm8018:
- s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
- l12, l14, lvs1
-
-smb208:
- s1a, s1b, s2a, s2b
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt - with additional custom properties described below:
-
-=== Switch-mode Power Supply regulator custom properties
-
-- bias-pull-down:
- Usage: optional
- Value type: <empty>
- Definition: enable pull down of the regulator when inactive
-
-- qcom,switch-mode-frequency:
- Usage: required
- Value type: <u32>
- Definition: Frequency (Hz) of the switch-mode power supply;
- must be one of:
- 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
- 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
- 1480000, 1370000, 1280000, 1200000
-
-- qcom,force-mode:
- Usage: optional (default if no other qcom,force-mode is specified)
- Value type: <u32>
- Definition: indicates that the regulator should be forced to a
- particular mode, valid values are:
- QCOM_RPM_FORCE_MODE_NONE - do not force any mode
- QCOM_RPM_FORCE_MODE_LPM - force into low power mode
- QCOM_RPM_FORCE_MODE_HPM - force into high power mode
- QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
- select its own mode based on
- realtime current draw, only for:
- pm8921 smps and ftsmps
-
-- qcom,power-mode-hysteretic:
- Usage: optional
- Value type: <empty>
- Definition: select that the power supply should operate in hysteretic
- mode, instead of the default pwm mode
-
-=== Low-dropout regulator custom properties
-
-- bias-pull-down:
- Usage: optional
- Value type: <empty>
- Definition: enable pull down of the regulator when inactive
-
-- qcom,force-mode:
- Usage: optional
- Value type: <u32>
- Definition: indicates that the regulator should not be forced to any
- particular mode, valid values are:
- QCOM_RPM_FORCE_MODE_NONE - do not force any mode
- QCOM_RPM_FORCE_MODE_LPM - force into low power mode
- QCOM_RPM_FORCE_MODE_HPM - force into high power mode
- QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
- mode, i.e. to act as a switch
- and not regulate, only for:
- pm8921 pldo, nldo and nldo1200
-
-=== Negative Charge Pump custom properties
-
-- qcom,switch-mode-frequency:
- Usage: required
- Value type: <u32>
- Definition: Frequency (Hz) of the switch mode power supply;
- must be one of:
- 19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
- 2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
- 1480000, 1370000, 1280000, 1200000
-
-= EXAMPLE
-
- #include <dt-bindings/mfd/qcom-rpm.h>
-
- rpm@108000 {
- compatible = "qcom,rpm-msm8960";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&apcs 0x8 2>;
-
- interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
- interrupt-names = "ack", "err", "wakeup";
-
- regulators {
- compatible = "qcom,rpm-pm8921-regulators";
- vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-
- s1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- bias-pull-down;
-
- qcom,switch-mode-frequency = <3200000>;
- };
-
- pm8921_s4: s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- qcom,switch-mode-frequency = <1600000>;
- bias-pull-down;
-
- qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
- };
- };
- };
-
diff --git a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
index b03b2f00cc5b..3bee3f8733f7 100644
--- a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
@@ -22,13 +22,13 @@ properties:
samsung,pmu-syscon:
$ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
description:
- Phandle to PMU system controller interface.
+ Phandle to PMU system controller interface (if not a child of PMU).
required:
- compatible
- "#phy-cells"
- - samsung,pmu-syscon
additionalProperties: false
@@ -36,6 +36,5 @@ examples:
- |
phy {
compatible = "samsung,exynos5420-dp-video-phy";
- samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
diff --git a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
index 415440aaad89..b2250e4a6b1b 100644
--- a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
@@ -35,15 +35,18 @@ properties:
syscon:
$ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
description:
Phandle to PMU system controller interface, valid only for
- samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy.
+ samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy (if
+ not a child of PMU).
samsung,pmu-syscon:
$ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
description:
Phandle to PMU system controller interface, valid for
- samsung,exynos5433-mipi-video-phy.
+ samsung,exynos5433-mipi-video-phy (if not a child of PMU).
samsung,disp-sysreg:
$ref: /schemas/types.yaml#/definitions/phandle
@@ -81,13 +84,10 @@ allOf:
samsung,disp-sysreg: false
samsung,cam0-sysreg: false
samsung,cam1-sysreg: false
- required:
- - syscon
else:
properties:
syscon: false
required:
- - samsung,pmu-syscon
- samsung,disp-sysreg
- samsung,cam0-sysreg
- samsung,cam1-sysreg
@@ -99,7 +99,6 @@ examples:
phy {
compatible = "samsung,exynos5433-mipi-video-phy";
#phy-cells = <1>;
- samsung,pmu-syscon = <&pmu_system_controller>;
samsung,cam0-sysreg = <&syscon_cam0>;
samsung,cam1-sysreg = <&syscon_cam1>;
samsung,disp-sysreg = <&syscon_disp>;
diff --git a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
new file mode 100644
index 000000000000..46e2647a5d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/allwinner,sun20i-d1-ppu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SoCs PPU power domain controller
+
+maintainers:
+ - Samuel Holland <samuel@sholland.org>
+
+description:
+ D1 and related SoCs contain a power domain controller for the CPUs, GPU, and
+ video-related hardware.
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun20i-d1-ppu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: Bus Clock
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun20i-d1-r-ccu.h>
+ #include <dt-bindings/reset/sun20i-d1-r-ccu.h>
+
+ ppu: power-controller@7001000 {
+ compatible = "allwinner,sun20i-d1-ppu";
+ reg = <0x7001000 0x1000>;
+ clocks = <&r_ccu CLK_BUS_R_PPU>;
+ resets = <&r_ccu RST_BUS_R_PPU>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
index 99b5b10cda31..ba5865ae6bfe 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -1,5 +1,5 @@
-Amlogic Meson Power Controller
-==============================
+Amlogic Meson Power Controller (deprecated)
+===========================================
The Amlogic Meson SoCs embeds an internal Power domain controller.
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index 605ec7ab5f63..c9acef80f452 100644
--- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -28,6 +28,7 @@ properties:
- mediatek,mt8173-power-controller
- mediatek,mt8183-power-controller
- mediatek,mt8186-power-controller
+ - mediatek,mt8188-power-controller
- mediatek,mt8192-power-controller
- mediatek,mt8195-power-controller
@@ -84,6 +85,7 @@ $defs:
"include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
"include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
"include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
+ "include/dt-bindings/power/mediatek,mt8188-power.h" - for MT8188 type power domain.
"include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
"include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
maxItems: 1
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index 633d49884019..afad3135ed67 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -30,6 +30,7 @@ properties:
- qcom,qcs404-rpmpd
- qcom,qdu1000-rpmhpd
- qcom,sa8540p-rpmhpd
+ - qcom,sa8775p-rpmhpd
- qcom,sdm660-rpmpd
- qcom,sc7180-rpmhpd
- qcom,sc7280-rpmhpd
@@ -39,7 +40,6 @@ properties:
- qcom,sdm845-rpmhpd
- qcom,sdx55-rpmhpd
- qcom,sdx65-rpmhpd
- - qcom,sm4250-rpmpd
- qcom,sm6115-rpmpd
- qcom,sm6125-rpmpd
- qcom,sm6350-rpmhpd
diff --git a/Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml b/Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml
new file mode 100644
index 000000000000..98eb8b4110e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/starfive,jh7110-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Power Management Unit
+
+maintainers:
+ - Walker Chen <walker.chen@starfivetech.com>
+
+description: |
+ StarFive JH7110 SoC includes support for multiple power domains which can be
+ powered on/off by software based on different application scenes to save power.
+
+properties:
+ compatible:
+ enum:
+ - starfive,jh7110-pmu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#power-domain-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ pwrc: power-controller@17030000 {
+ compatible = "starfive,jh7110-pmu";
+ reg = <0x17030000 0x10000>;
+ interrupts = <111>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
index 2998f1c8f0db..08eb10c25821 100644
--- a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
@@ -27,9 +27,11 @@ properties:
identifier of the client to use this region for buffers
qcom,vmid:
- $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32-array
description: >
- vmid of the remote processor, to set up memory protection
+ Array of vmids of the remote processors, to set up memory protection
+ minItems: 1
+ maxItems: 2
required:
- qcom,client-id
diff --git a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
index 0551a0d1b3df..eb6ab73c0f31 100644
--- a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
+++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
@@ -38,6 +38,10 @@ properties:
- sifive,fu740-c000-ccache
- const: cache
- items:
+ - const: starfive,jh7110-ccache
+ - const: sifive,ccache0
+ - const: cache
+ - items:
- const: microchip,mpfs-ccache
- const: sifive,fu540-c000-ccache
- const: cache
@@ -84,6 +88,7 @@ allOf:
contains:
enum:
- sifive,fu740-c000-ccache
+ - starfive,jh7110-ccache
- microchip,mpfs-ccache
then:
@@ -104,7 +109,9 @@ allOf:
properties:
compatible:
contains:
- const: sifive,fu740-c000-ccache
+ enum:
+ - sifive,fu740-c000-ccache
+ - starfive,jh7110-ccache
then:
properties:
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
index 9241e5fc7cff..15c133cac315 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
@@ -32,6 +32,7 @@ properties:
- mediatek,mt8183-disp-mutex
- mediatek,mt8186-disp-mutex
- mediatek,mt8186-mdp3-mutex
+ - mediatek,mt8188-disp-mutex
- mediatek,mt8192-disp-mutex
- mediatek,mt8195-disp-mutex
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
new file mode 100644
index 000000000000..3fefd634bc69
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+ - Flora Fu <flora.fu@mediatek.com>
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+ On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+ is not directly visible to the CPU, but only through the PMIC wrapper
+ inside the SoC. The communication between the SoC and the PMIC can
+ optionally be encrypted. Also a non standard Dual IO SPI mode can be
+ used to increase speed.
+
+ IP Pairing
+
+ On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+ The signals of these pins are routed over the SPI bus using the pwrap
+ bridge. In the binding description below the properties needed for bridging
+ are marked with "IP Pairing". These are optional on SoCs which do not support
+ IP Pairing
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-pwrap
+ - mediatek,mt6765-pwrap
+ - mediatek,mt6779-pwrap
+ - mediatek,mt6797-pwrap
+ - mediatek,mt6873-pwrap
+ - mediatek,mt7622-pwrap
+ - mediatek,mt8135-pwrap
+ - mediatek,mt8173-pwrap
+ - mediatek,mt8183-pwrap
+ - mediatek,mt8186-pwrap
+ - mediatek,mt8188-pwrap
+ - mediatek,mt8195-pwrap
+ - mediatek,mt8365-pwrap
+ - mediatek,mt8516-pwrap
+ - items:
+ - enum:
+ - mediatek,mt8186-pwrap
+ - mediatek,mt8195-pwrap
+ - const: syscon
+
+ reg:
+ minItems: 1
+ items:
+ - description: PMIC wrapper registers
+ - description: IP pairing registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: pwrap
+ - const: pwrap-bridge
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ items:
+ - description: SPI bus clock
+ - description: Main module clock
+ - description: System module clock
+ - description: Timer module clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: spi
+ - const: wrap
+ - const: sys
+ - const: tmr
+
+ resets:
+ minItems: 1
+ items:
+ - description: PMIC wrapper reset
+ - description: IP pairing reset
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: pwrap
+ - const: pwrap-bridge
+
+ pmic:
+ type: object
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+
+dependentRequired:
+ resets: [reset-names]
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8365-pwrap
+ then:
+ properties:
+ clocks:
+ minItems: 4
+
+ clock-names:
+ minItems: 4
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/mt8135-resets.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pwrap@1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap", "pwrap-bridge";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "spi", "wrap";
+ resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+ <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "pwrap", "pwrap-bridge";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
deleted file mode 100644
index 12e4b4260b40..000000000000
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-MediaTek PMIC Wrapper Driver
-
-This document describes the binding for the MediaTek PMIC wrapper.
-
-On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
-is not directly visible to the CPU, but only through the PMIC wrapper
-inside the SoC. The communication between the SoC and the PMIC can
-optionally be encrypted. Also a non standard Dual IO SPI mode can be
-used to increase speed.
-
-IP Pairing
-
-on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
-The signals of these pins are routed over the SPI bus using the pwrap
-bridge. In the binding description below the properties needed for bridging
-are marked with "IP Pairing". These are optional on SoCs which do not support
-IP Pairing
-
-Required properties in pwrap device node.
-- compatible:
- "mediatek,mt2701-pwrap" for MT2701/7623 SoCs
- "mediatek,mt6765-pwrap" for MT6765 SoCs
- "mediatek,mt6779-pwrap" for MT6779 SoCs
- "mediatek,mt6797-pwrap" for MT6797 SoCs
- "mediatek,mt6873-pwrap" for MT6873/8192 SoCs
- "mediatek,mt7622-pwrap" for MT7622 SoCs
- "mediatek,mt8135-pwrap" for MT8135 SoCs
- "mediatek,mt8173-pwrap" for MT8173 SoCs
- "mediatek,mt8183-pwrap" for MT8183 SoCs
- "mediatek,mt8186-pwrap" for MT8186 SoCs
- "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
- "mediatek,mt8195-pwrap" for MT8195 SoCs
- "mediatek,mt8365-pwrap" for MT8365 SoCs
- "mediatek,mt8516-pwrap" for MT8516 SoCs
-- interrupts: IRQ for pwrap in SOC
-- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
- "pwrap": Main registers base
- "pwrap-bridge": bridge base (IP Pairing)
-- reg: Must contain an entry for each entry in reg-names.
-- clock-names: Must include the following entries:
- "spi": SPI bus clock
- "wrap": Main module clock
- "sys": Optional system module clock
- "tmr": Optional timer module clock
-- clocks: Must contain an entry for each entry in clock-names.
-
-Optional properities:
-- reset-names: Some SoCs include the following entries:
- "pwrap"
- "pwrap-bridge" (IP Pairing)
-- resets: Must contain an entry for each entry in reset-names.
-- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
- See the following for child node definitions:
- Documentation/devicetree/bindings/mfd/mt6397.txt
- or the regulator-only device as the child device of pwrap, such as MT6380.
- See the following definitions for such kinds of devices.
- Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
-
-Example:
- pwrap: pwrap@1000f000 {
- compatible = "mediatek,mt8135-pwrap";
- reg = <0 0x1000f000 0 0x1000>,
- <0 0x11017000 0 0x1000>;
- reg-names = "pwrap", "pwrap-bridge";
- interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
- <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
- reset-names = "pwrap", "pwrap-bridge";
- clocks = <&clk26m>, <&clk26m>;
- clock-names = "spi", "wrap";
-
- pmic {
- compatible = "mediatek,mt6397";
- };
- };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
new file mode 100644
index 000000000000..ce7e20dd22c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Data Capture and Compare
+
+maintainers:
+ - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description: |
+ DCC (Data Capture and Compare) is a DMA engine which is used to save
+ configuration data or system memory contents during catastrophic failure
+ or SW trigger. DCC is used to capture and store data for debugging purpose
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sm8150-dcc
+ - qcom,sc7280-dcc
+ - qcom,sc7180-dcc
+ - qcom,sdm845-dcc
+ - const: qcom,dcc
+
+ reg:
+ items:
+ - description: DCC base
+ - description: DCC RAM base
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ dma@10a2000{
+ compatible = "qcom,sm8150-dcc", "qcom,dcc";
+ reg = <0x010a2000 0x1000>,
+ <0x010ad000 0x2000>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml
new file mode 100644
index 000000000000..aae9cf7b8caf
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ramp Controller
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+ The Ramp Controller is used to program the sequence ID for pulse
+ swallowing, enable sequences and link Sequence IDs (SIDs) for the
+ CPU cores on some Qualcomm SoCs.
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8976-ramp-controller
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ cpu-power-controller@b014000 {
+ compatible = "qcom,msm8976-ramp-controller";
+ reg = <0x0b014000 0x68>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
new file mode 100644
index 000000000000..cf863683c21a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC GLINK firmware interface for battery management, USB
+ Type-C and other things.
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ The PMIC GLINK service, running on a coprocessor on some modern Qualcomm
+ platforms and implement USB Type-C handling and battery management. This
+ binding describes the component in the OS used to communicate with the
+ firmware and connect it's resources to those described in the Devicetree,
+ particularly the USB Type-C controllers relationship with USB and DisplayPort
+ components.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sc8180x-pmic-glink
+ - qcom,sc8280xp-pmic-glink
+ - qcom,sm8350-pmic-glink
+ - const: qcom,pmic-glink
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ '^connector@\d$':
+ $ref: /schemas/connector/usb-connector.yaml#
+
+ properties:
+ reg: true
+
+ required:
+ - reg
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |+
+ pmic-glink {
+ compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_role>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&ss_phy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+...
+
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
new file mode 100644
index 000000000000..b00be9e01206
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM)
+
+description:
+ This driver is used to interface with the Resource Power Manager (RPM) found
+ in various Qualcomm platforms. The RPM allows each component in the system
+ to vote for state of the system resources, such as clocks, regulators and bus
+ frequencies.
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,rpm-apq8064
+ - qcom,rpm-msm8660
+ - qcom,rpm-msm8960
+ - qcom,rpm-ipq8064
+ - qcom,rpm-mdm9615
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: ack
+ - const: err
+ - const: wakeup
+
+ qcom,ipc:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to a syscon node representing the APCS registers
+ - description: u32 representing offset to the register within the syscon
+ - description: u32 representing the ipc bit within the register
+ description:
+ Three entries specifying the outgoing ipc bit used for signaling the RPM.
+
+patternProperties:
+ "^regulators(-[01])?$":
+ type: object
+ $ref: /schemas/regulator/qcom,rpm-regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - qcom,ipc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mfd/qcom-rpm.h>
+
+ rpm@108000 {
+ compatible = "qcom,rpm-msm8960";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&apcs 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+ s1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
index b246500d3d5d..a4046ba60846 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -112,8 +112,9 @@ properties:
$ref: /schemas/power/qcom,rpmpd.yaml#
patternProperties:
- '-regulators$':
+ '^regulators(-[0-9])?$':
$ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
+ unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index 11c0f4dd797c..16fd67c0bd1f 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -80,6 +80,7 @@ if:
enum:
- qcom,rpm-apq8084
- qcom,rpm-msm8916
+ - qcom,rpm-msm8936
- qcom,rpm-msm8974
- qcom,rpm-msm8976
- qcom,rpm-msm8953
diff --git a/MAINTAINERS b/MAINTAINERS
index 70429a8e59bc..0b4edb98289b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17253,7 +17253,8 @@ F: drivers/clk/qcom/
F: include/dt-bindings/clock/qcom,*
QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVER
-M: Niklas Cassel <nks@flawful.org>
+M: Bjorn Andersson <andersson@kernel.org>
+M: Konrad Dybcio <konrad.dybcio@linaro.org>
L: linux-pm@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
@@ -19947,6 +19948,19 @@ F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
F: drivers/reset/reset-starfive-jh7100.c
F: include/dt-bindings/reset/starfive-jh7100.h
+STARFIVE JH71XX PMU CONTROLLER DRIVER
+M: Walker Chen <walker.chen@starfivetech.com>
+S: Supported
+F: Documentation/devicetree/bindings/power/starfive*
+F: drivers/soc/starfive/jh71xx_pmu.c
+F: include/dt-bindings/power/starfive,jh7110-pmu.h
+
+STARFIVE SOC DRIVERS
+M: Conor Dooley <conor@kernel.org>
+S: Maintained
+T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
+F: drivers/soc/starfive/
+
STARFIVE TRNG DRIVER
M: Jia Jie Ho <jiajie.ho@starfivetech.com>
S: Supported
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 5d2f386a46d8..eca2fe0f4314 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -14,7 +14,7 @@
#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <asm/smp_plat.h>
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 828c66bbaa67..2a6b4f676458 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -263,7 +263,6 @@ static int weim_parse_dt(struct platform_device *pdev)
static int weim_probe(struct platform_device *pdev)
{
struct weim_priv *priv;
- struct resource *res;
struct clk *clk;
void __iomem *base;
int ret;
@@ -273,8 +272,7 @@ static int weim_probe(struct platform_device *pdev)
return -ENOMEM;
/* get the resource */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(base))
return PTR_ERR(base);
diff --git a/drivers/cpuidle/cpuidle-qcom-spm.c b/drivers/cpuidle/cpuidle-qcom-spm.c
index 326bca154ac7..c6e2e91bb4c3 100644
--- a/drivers/cpuidle/cpuidle-qcom-spm.c
+++ b/drivers/cpuidle/cpuidle-qcom-spm.c
@@ -17,7 +17,7 @@
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <soc/qcom/spm.h>
#include <asm/proc-fns.h>
diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
index a14f65444b35..ea0f5083ac47 100644
--- a/drivers/firmware/arm_scmi/Kconfig
+++ b/drivers/firmware/arm_scmi/Kconfig
@@ -23,6 +23,38 @@ config ARM_SCMI_PROTOCOL
if ARM_SCMI_PROTOCOL
+config ARM_SCMI_NEED_DEBUGFS
+ bool
+ help
+ This declares whether at least one SCMI facility is configured
+ which needs debugfs support. When selected causess the creation
+ of a common SCMI debugfs root directory.
+
+config ARM_SCMI_RAW_MODE_SUPPORT
+ bool "Enable support for SCMI Raw transmission mode"
+ depends on DEBUG_FS
+ select ARM_SCMI_NEED_DEBUGFS
+ help
+ Enable support for SCMI Raw transmission mode.
+
+ If enabled allows the direct injection and snooping of SCMI bare
+ messages through a dedicated debugfs interface.
+ It is meant to be used by SCMI compliance/testing suites.
+
+ When enabled regular SCMI drivers interactions are inhibited in
+ order to avoid unexpected interactions with the SCMI Raw message
+ flow. If unsure say N.
+
+config ARM_SCMI_RAW_MODE_SUPPORT_COEX
+ bool "Allow SCMI Raw mode coexistence with normal SCMI stack"
+ depends on ARM_SCMI_RAW_MODE_SUPPORT
+ help
+ Allow SCMI Raw transmission mode to coexist with normal SCMI stack.
+
+ This will allow regular SCMI drivers to register with the core and
+ operate normally, thing which could make an SCMI test suite using the
+ SCMI Raw mode support unreliable. If unsure, say N.
+
config ARM_SCMI_HAVE_TRANSPORT
bool
help
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index 9ea86f8cc8f7..b31d78fa66cc 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -1,6 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
scmi-bus-y = bus.o
+scmi-core-objs := $(scmi-bus-y)
+
scmi-driver-y = driver.o notify.o
+scmi-driver-$(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) += raw_mode.o
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += mailbox.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += smc.o
@@ -8,9 +11,11 @@ scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += optee.o
scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o powercap.o
-scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
- $(scmi-transport-y)
+scmi-module-objs := $(scmi-driver-y) $(scmi-protocols-y) $(scmi-transport-y)
+
+obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-core.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
+
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
obj-$(CONFIG_ARM_SCMI_POWER_CONTROL) += scmi_power_control.o
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index cc2eba067575..73140b854b31 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -7,8 +7,10 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/atomic.h>
#include <linux/types.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/device.h>
@@ -16,9 +18,174 @@
#include "common.h"
+BLOCKING_NOTIFIER_HEAD(scmi_requested_devices_nh);
+EXPORT_SYMBOL_GPL(scmi_requested_devices_nh);
+
static DEFINE_IDA(scmi_bus_id);
-static DEFINE_IDR(scmi_protocols);
-static DEFINE_SPINLOCK(protocol_lock);
+
+static DEFINE_IDR(scmi_requested_devices);
+/* Protect access to scmi_requested_devices */
+static DEFINE_MUTEX(scmi_requested_devices_mtx);
+
+struct scmi_requested_dev {
+ const struct scmi_device_id *id_table;
+ struct list_head node;
+};
+
+/* Track globally the creation of SCMI SystemPower related devices */
+static atomic_t scmi_syspower_registered = ATOMIC_INIT(0);
+
+/**
+ * scmi_protocol_device_request - Helper to request a device
+ *
+ * @id_table: A protocol/name pair descriptor for the device to be created.
+ *
+ * This helper let an SCMI driver request specific devices identified by the
+ * @id_table to be created for each active SCMI instance.
+ *
+ * The requested device name MUST NOT be already existent for any protocol;
+ * at first the freshly requested @id_table is annotated in the IDR table
+ * @scmi_requested_devices and then the requested device is advertised to any
+ * registered party via the @scmi_requested_devices_nh notification chain.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_protocol_device_request(const struct scmi_device_id *id_table)
+{
+ int ret = 0;
+ unsigned int id = 0;
+ struct list_head *head, *phead = NULL;
+ struct scmi_requested_dev *rdev;
+
+ pr_debug("Requesting SCMI device (%s) for protocol %x\n",
+ id_table->name, id_table->protocol_id);
+
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) &&
+ !IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX)) {
+ pr_warn("SCMI Raw mode active. Rejecting '%s'/0x%02X\n",
+ id_table->name, id_table->protocol_id);
+ return -EINVAL;
+ }
+
+ /*
+ * Search for the matching protocol rdev list and then search
+ * of any existent equally named device...fails if any duplicate found.
+ */
+ mutex_lock(&scmi_requested_devices_mtx);
+ idr_for_each_entry(&scmi_requested_devices, head, id) {
+ if (!phead) {
+ /* A list found registered in the IDR is never empty */
+ rdev = list_first_entry(head, struct scmi_requested_dev,
+ node);
+ if (rdev->id_table->protocol_id ==
+ id_table->protocol_id)
+ phead = head;
+ }
+ list_for_each_entry(rdev, head, node) {
+ if (!strcmp(rdev->id_table->name, id_table->name)) {
+ pr_err("Ignoring duplicate request [%d] %s\n",
+ rdev->id_table->protocol_id,
+ rdev->id_table->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+ }
+
+ /*
+ * No duplicate found for requested id_table, so let's create a new
+ * requested device entry for this new valid request.
+ */
+ rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
+ if (!rdev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ rdev->id_table = id_table;
+
+ /*
+ * Append the new requested device table descriptor to the head of the
+ * related protocol list, eventually creating such head if not already
+ * there.
+ */
+ if (!phead) {
+ phead = kzalloc(sizeof(*phead), GFP_KERNEL);
+ if (!phead) {
+ kfree(rdev);
+ ret = -ENOMEM;
+ goto out;
+ }
+ INIT_LIST_HEAD(phead);
+
+ ret = idr_alloc(&scmi_requested_devices, (void *)phead,
+ id_table->protocol_id,
+ id_table->protocol_id + 1, GFP_KERNEL);
+ if (ret != id_table->protocol_id) {
+ pr_err("Failed to save SCMI device - ret:%d\n", ret);
+ kfree(rdev);
+ kfree(phead);
+ ret = -EINVAL;
+ goto out;
+ }
+ ret = 0;
+ }
+ list_add(&rdev->node, phead);
+
+out:
+ mutex_unlock(&scmi_requested_devices_mtx);
+
+ if (!ret)
+ blocking_notifier_call_chain(&scmi_requested_devices_nh,
+ SCMI_BUS_NOTIFY_DEVICE_REQUEST,
+ (void *)rdev->id_table);
+
+ return ret;
+}
+
+/**
+ * scmi_protocol_device_unrequest - Helper to unrequest a device
+ *
+ * @id_table: A protocol/name pair descriptor for the device to be unrequested.
+ *
+ * The unrequested device, described by the provided id_table, is at first
+ * removed from the IDR @scmi_requested_devices and then the removal is
+ * advertised to any registered party via the @scmi_requested_devices_nh
+ * notification chain.
+ */
+static void scmi_protocol_device_unrequest(const struct scmi_device_id *id_table)
+{
+ struct list_head *phead;
+
+ pr_debug("Unrequesting SCMI device (%s) for protocol %x\n",
+ id_table->name, id_table->protocol_id);
+
+ mutex_lock(&scmi_requested_devices_mtx);
+ phead = idr_find(&scmi_requested_devices, id_table->protocol_id);
+ if (phead) {
+ struct scmi_requested_dev *victim, *tmp;
+
+ list_for_each_entry_safe(victim, tmp, phead, node) {
+ if (!strcmp(victim->id_table->name, id_table->name)) {
+ list_del(&victim->node);
+
+ mutex_unlock(&scmi_requested_devices_mtx);
+ blocking_notifier_call_chain(&scmi_requested_devices_nh,
+ SCMI_BUS_NOTIFY_DEVICE_UNREQUEST,
+ (void *)victim->id_table);
+ kfree(victim);
+ mutex_lock(&scmi_requested_devices_mtx);
+ break;
+ }
+ }
+
+ if (list_empty(phead)) {
+ idr_remove(&scmi_requested_devices,
+ id_table->protocol_id);
+ kfree(phead);
+ }
+ }
+ mutex_unlock(&scmi_requested_devices_mtx);
+}
static const struct scmi_device_id *
scmi_dev_match_id(struct scmi_device *scmi_dev, struct scmi_driver *scmi_drv)
@@ -58,11 +225,11 @@ static int scmi_match_by_id_table(struct device *dev, void *data)
struct scmi_device_id *id_table = data;
return sdev->protocol_id == id_table->protocol_id &&
- !strcmp(sdev->name, id_table->name);
+ (id_table->name && !strcmp(sdev->name, id_table->name));
}
-struct scmi_device *scmi_child_dev_find(struct device *parent,
- int prot_id, const char *name)
+static struct scmi_device *scmi_child_dev_find(struct device *parent,
+ int prot_id, const char *name)
{
struct scmi_device_id id_table;
struct device *dev;
@@ -77,30 +244,6 @@ struct scmi_device *scmi_child_dev_find(struct device *parent,
return to_scmi_dev(dev);
}
-const struct scmi_protocol *scmi_protocol_get(int protocol_id)
-{
- const struct scmi_protocol *proto;
-
- proto = idr_find(&scmi_protocols, protocol_id);
- if (!proto || !try_module_get(proto->owner)) {
- pr_warn("SCMI Protocol 0x%x not found!\n", protocol_id);
- return NULL;
- }
-
- pr_debug("Found SCMI Protocol 0x%x\n", protocol_id);
-
- return proto;
-}
-
-void scmi_protocol_put(int protocol_id)
-{
- const struct scmi_protocol *proto;
-
- proto = idr_find(&scmi_protocols, protocol_id);
- if (proto)
- module_put(proto->owner);
-}
-
static int scmi_dev_probe(struct device *dev)
{
struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver);
@@ -121,12 +264,13 @@ static void scmi_dev_remove(struct device *dev)
scmi_drv->remove(scmi_dev);
}
-static struct bus_type scmi_bus_type = {
+struct bus_type scmi_bus_type = {
.name = "scmi_protocol",
.match = scmi_dev_match,
.probe = scmi_dev_probe,
.remove = scmi_dev_remove,
};
+EXPORT_SYMBOL_GPL(scmi_bus_type);
int scmi_driver_register(struct scmi_driver *driver, struct module *owner,
const char *mod_name)
@@ -147,7 +291,7 @@ int scmi_driver_register(struct scmi_driver *driver, struct module *owner,
retval = driver_register(&driver->driver);
if (!retval)
- pr_debug("registered new scmi driver %s\n", driver->name);
+ pr_debug("Registered new scmi driver %s\n", driver->name);
return retval;
}
@@ -165,13 +309,53 @@ static void scmi_device_release(struct device *dev)
kfree(to_scmi_dev(dev));
}
-struct scmi_device *
-scmi_device_create(struct device_node *np, struct device *parent, int protocol,
- const char *name)
+static void __scmi_device_destroy(struct scmi_device *scmi_dev)
+{
+ pr_debug("(%s) Destroying SCMI device '%s' for protocol 0x%x (%s)\n",
+ of_node_full_name(scmi_dev->dev.parent->of_node),
+ dev_name(&scmi_dev->dev), scmi_dev->protocol_id,
+ scmi_dev->name);
+
+ if (scmi_dev->protocol_id == SCMI_PROTOCOL_SYSTEM)
+ atomic_set(&scmi_syspower_registered, 0);
+
+ kfree_const(scmi_dev->name);
+ ida_free(&scmi_bus_id, scmi_dev->id);
+ device_unregister(&scmi_dev->dev);
+}
+
+static struct scmi_device *
+__scmi_device_create(struct device_node *np, struct device *parent,
+ int protocol, const char *name)
{
int id, retval;
struct scmi_device *scmi_dev;
+ /*
+ * If the same protocol/name device already exist under the same parent
+ * (i.e. SCMI instance) just return the existent device.
+ * This avoids any race between the SCMI driver, creating devices for
+ * each DT defined protocol at probe time, and the concurrent
+ * registration of SCMI drivers.
+ */
+ scmi_dev = scmi_child_dev_find(parent, protocol, name);
+ if (scmi_dev)
+ return scmi_dev;
+
+ /*
+ * Ignore any possible subsequent failures while creating the device
+ * since we are doomed anyway at that point; not using a mutex which
+ * spans across this whole function to keep things simple and to avoid
+ * to serialize all the __scmi_device_create calls across possibly
+ * different SCMI server instances (parent)
+ */
+ if (protocol == SCMI_PROTOCOL_SYSTEM &&
+ atomic_cmpxchg(&scmi_syspower_registered, 0, 1)) {
+ dev_warn(parent,
+ "SCMI SystemPower protocol device must be unique !\n");
+ return NULL;
+ }
+
scmi_dev = kzalloc(sizeof(*scmi_dev), GFP_KERNEL);
if (!scmi_dev)
return NULL;
@@ -201,6 +385,10 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol,
if (retval)
goto put_dev;
+ pr_debug("(%s) Created SCMI device '%s' for protocol 0x%x (%s)\n",
+ of_node_full_name(parent->of_node),
+ dev_name(&scmi_dev->dev), protocol, name);
+
return scmi_dev;
put_dev:
kfree_const(scmi_dev->name);
@@ -209,77 +397,85 @@ put_dev:
return NULL;
}
-void scmi_device_destroy(struct scmi_device *scmi_dev)
-{
- kfree_const(scmi_dev->name);
- scmi_handle_put(scmi_dev->handle);
- ida_free(&scmi_bus_id, scmi_dev->id);
- device_unregister(&scmi_dev->dev);
-}
-
-void scmi_device_link_add(struct device *consumer, struct device *supplier)
-{
- struct device_link *link;
-
- link = device_link_add(consumer, supplier, DL_FLAG_AUTOREMOVE_CONSUMER);
-
- WARN_ON(!link);
-}
-
-void scmi_set_handle(struct scmi_device *scmi_dev)
-{
- scmi_dev->handle = scmi_handle_get(&scmi_dev->dev);
- if (scmi_dev->handle)
- scmi_device_link_add(&scmi_dev->dev, scmi_dev->handle->dev);
-}
-
-int scmi_protocol_register(const struct scmi_protocol *proto)
+/**
+ * scmi_device_create - A method to create one or more SCMI devices
+ *
+ * @np: A reference to the device node to use for the new device(s)
+ * @parent: The parent device to use identifying a specific SCMI instance
+ * @protocol: The SCMI protocol to be associated with this device
+ * @name: The requested-name of the device to be created; this is optional
+ * and if no @name is provided, all the devices currently known to
+ * be requested on the SCMI bus for @protocol will be created.
+ *
+ * This method can be invoked to create a single well-defined device (like
+ * a transport device or a device requested by an SCMI driver loaded after
+ * the core SCMI stack has been probed), or to create all the devices currently
+ * known to have been requested by the loaded SCMI drivers for a specific
+ * protocol (typically during SCMI core protocol enumeration at probe time).
+ *
+ * Return: The created device (or one of them if @name was NOT provided and
+ * multiple devices were created) or NULL if no device was created;
+ * note that NULL indicates an error ONLY in case a specific @name
+ * was provided: when @name param was not provided, a number of devices
+ * could have been potentially created for a whole protocol, unless no
+ * device was found to have been requested for that specific protocol.
+ */
+struct scmi_device *scmi_device_create(struct device_node *np,
+ struct device *parent, int protocol,
+ const char *name)
{
- int ret;
-
- if (!proto) {
- pr_err("invalid protocol\n");
- return -EINVAL;
- }
-
- if (!proto->instance_init) {
- pr_err("missing init for protocol 0x%x\n", proto->id);
- return -EINVAL;
+ struct list_head *phead;
+ struct scmi_requested_dev *rdev;
+ struct scmi_device *scmi_dev = NULL;
+
+ if (name)
+ return __scmi_device_create(np, parent, protocol, name);
+
+ mutex_lock(&scmi_requested_devices_mtx);
+ phead = idr_find(&scmi_requested_devices, protocol);
+ /* Nothing to do. */
+ if (!phead) {
+ mutex_unlock(&scmi_requested_devices_mtx);
+ return scmi_dev;
}
- spin_lock(&protocol_lock);
- ret = idr_alloc(&scmi_protocols, (void *)proto,
- proto->id, proto->id + 1, GFP_ATOMIC);
- spin_unlock(&protocol_lock);
- if (ret != proto->id) {
- pr_err("unable to allocate SCMI idr slot for 0x%x - err %d\n",
- proto->id, ret);
- return ret;
+ /* Walk the list of requested devices for protocol and create them */
+ list_for_each_entry(rdev, phead, node) {
+ struct scmi_device *sdev;
+
+ sdev = __scmi_device_create(np, parent,
+ rdev->id_table->protocol_id,
+ rdev->id_table->name);
+ /* Report errors and carry on... */
+ if (sdev)
+ scmi_dev = sdev;
+ else
+ pr_err("(%s) Failed to create device for protocol 0x%x (%s)\n",
+ of_node_full_name(parent->of_node),
+ rdev->id_table->protocol_id,
+ rdev->id_table->name);
}
+ mutex_unlock(&scmi_requested_devices_mtx);
- pr_debug("Registered SCMI Protocol 0x%x\n", proto->id);
-
- return 0;
+ return scmi_dev;
}
-EXPORT_SYMBOL_GPL(scmi_protocol_register);
+EXPORT_SYMBOL_GPL(scmi_device_create);
-void scmi_protocol_unregister(const struct scmi_protocol *proto)
+void scmi_device_destroy(struct device *parent, int protocol, const char *name)
{
- spin_lock(&protocol_lock);
- idr_remove(&scmi_protocols, proto->id);
- spin_unlock(&protocol_lock);
-
- pr_debug("Unregistered SCMI Protocol 0x%x\n", proto->id);
+ struct scmi_device *scmi_dev;
- return;
+ scmi_dev = scmi_child_dev_find(parent, protocol, name);
+ if (scmi_dev)
+ __scmi_device_destroy(scmi_dev);
}
-EXPORT_SYMBOL_GPL(scmi_protocol_unregister);
+EXPORT_SYMBOL_GPL(scmi_device_destroy);
static int __scmi_devices_unregister(struct device *dev, void *data)
{
struct scmi_device *scmi_dev = to_scmi_dev(dev);
- scmi_device_destroy(scmi_dev);
+ __scmi_device_destroy(scmi_dev);
return 0;
}
@@ -288,20 +484,33 @@ static void scmi_devices_unregister(void)
bus_for_each_dev(&scmi_bus_type, NULL, NULL, __scmi_devices_unregister);
}
-int __init scmi_bus_init(void)
+static int __init scmi_bus_init(void)
{
int retval;
retval = bus_register(&scmi_bus_type);
if (retval)
- pr_err("scmi protocol bus register failed (%d)\n", retval);
+ pr_err("SCMI protocol bus register failed (%d)\n", retval);
+
+ pr_info("SCMI protocol bus registered\n");
return retval;
}
+subsys_initcall(scmi_bus_init);
-void __exit scmi_bus_exit(void)
+static void __exit scmi_bus_exit(void)
{
+ /*
+ * Destroy all remaining devices: just in case the drivers were
+ * manually unbound and at first and then the modules unloaded.
+ */
scmi_devices_unregister();
bus_unregister(&scmi_bus_type);
ida_destroy(&scmi_bus_id);
}
+module_exit(scmi_bus_exit);
+
+MODULE_ALIAS("scmi-core");
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI protocol bus");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index a1c0154c31c6..c46dc5215af7 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -27,6 +27,48 @@
#include "protocols.h"
#include "notify.h"
+#define SCMI_MAX_CHANNELS 256
+
+#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
+
+enum scmi_error_codes {
+ SCMI_SUCCESS = 0, /* Success */
+ SCMI_ERR_SUPPORT = -1, /* Not supported */
+ SCMI_ERR_PARAMS = -2, /* Invalid Parameters */
+ SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */
+ SCMI_ERR_ENTRY = -4, /* Not found */
+ SCMI_ERR_RANGE = -5, /* Value out of range */
+ SCMI_ERR_BUSY = -6, /* Device busy */
+ SCMI_ERR_COMMS = -7, /* Communication Error */
+ SCMI_ERR_GENERIC = -8, /* Generic Error */
+ SCMI_ERR_HARDWARE = -9, /* Hardware Error */
+ SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
+};
+
+static const int scmi_linux_errmap[] = {
+ /* better than switch case as long as return value is continuous */
+ 0, /* SCMI_SUCCESS */
+ -EOPNOTSUPP, /* SCMI_ERR_SUPPORT */
+ -EINVAL, /* SCMI_ERR_PARAM */
+ -EACCES, /* SCMI_ERR_ACCESS */
+ -ENOENT, /* SCMI_ERR_ENTRY */
+ -ERANGE, /* SCMI_ERR_RANGE */
+ -EBUSY, /* SCMI_ERR_BUSY */
+ -ECOMM, /* SCMI_ERR_COMMS */
+ -EIO, /* SCMI_ERR_GENERIC */
+ -EREMOTEIO, /* SCMI_ERR_HARDWARE */
+ -EPROTO, /* SCMI_ERR_PROTOCOL */
+};
+
+static inline int scmi_to_linux_errno(int errno)
+{
+ int err_idx = -errno;
+
+ if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
+ return scmi_linux_errmap[err_idx];
+ return -EIO;
+}
+
#define MSG_ID_MASK GENMASK(7, 0)
#define MSG_XTRACT_ID(hdr) FIELD_GET(MSG_ID_MASK, (hdr))
#define MSG_TYPE_MASK GENMASK(9, 8)
@@ -96,18 +138,19 @@ static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
struct scmi_revision_info *
scmi_revision_area_get(const struct scmi_protocol_handle *ph);
-int scmi_handle_put(const struct scmi_handle *handle);
-void scmi_device_link_add(struct device *consumer, struct device *supplier);
-struct scmi_handle *scmi_handle_get(struct device *dev);
-void scmi_set_handle(struct scmi_device *scmi_dev);
void scmi_setup_protocol_implemented(const struct scmi_protocol_handle *ph,
u8 *prot_imp);
-int __init scmi_bus_init(void);
-void __exit scmi_bus_exit(void);
+extern struct bus_type scmi_bus_type;
+
+#define SCMI_BUS_NOTIFY_DEVICE_REQUEST 0
+#define SCMI_BUS_NOTIFY_DEVICE_UNREQUEST 1
+extern struct blocking_notifier_head scmi_requested_devices_nh;
-const struct scmi_protocol *scmi_protocol_get(int protocol_id);
-void scmi_protocol_put(int protocol_id);
+struct scmi_device *scmi_device_create(struct device_node *np,
+ struct device *parent, int protocol,
+ const char *name);
+void scmi_device_destroy(struct device *parent, int protocol, const char *name);
int scmi_protocol_acquire(const struct scmi_handle *handle, u8 protocol_id);
void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
@@ -116,6 +159,8 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
/**
* struct scmi_chan_info - Structure representing a SCMI channel information
*
+ * @id: An identifier for this channel: this matches the protocol number
+ * used to initialize this channel
* @dev: Reference to device in the SCMI hierarchy corresponding to this
* channel
* @rx_timeout_ms: The configured RX timeout in milliseconds.
@@ -127,6 +172,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
* @transport_info: Transport layer related information
*/
struct scmi_chan_info {
+ int id;
struct device *dev;
unsigned int rx_timeout_ms;
struct scmi_handle *handle;
@@ -153,7 +199,7 @@ struct scmi_chan_info {
*/
struct scmi_transport_ops {
int (*link_supplier)(struct device *dev);
- bool (*chan_available)(struct device *dev, int idx);
+ bool (*chan_available)(struct device_node *of_node, int idx);
int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
bool tx);
int (*chan_free)(int id, void *p, void *data);
@@ -170,11 +216,6 @@ struct scmi_transport_ops {
bool (*poll_done)(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer);
};
-int scmi_protocol_device_request(const struct scmi_device_id *id_table);
-void scmi_protocol_device_unrequest(const struct scmi_device_id *id_table);
-struct scmi_device *scmi_child_dev_find(struct device *parent,
- int prot_id, const char *name);
-
/**
* struct scmi_desc - Description of SoC integration
*
@@ -215,6 +256,36 @@ struct scmi_desc {
const bool atomic_enabled;
};
+static inline bool is_polling_required(struct scmi_chan_info *cinfo,
+ const struct scmi_desc *desc)
+{
+ return cinfo->no_completion_irq || desc->force_polling;
+}
+
+static inline bool is_transport_polling_capable(const struct scmi_desc *desc)
+{
+ return desc->ops->poll_done || desc->sync_cmds_completed_on_ret;
+}
+
+static inline bool is_polling_enabled(struct scmi_chan_info *cinfo,
+ const struct scmi_desc *desc)
+{
+ return is_polling_required(cinfo, desc) &&
+ is_transport_polling_capable(desc);
+}
+
+void scmi_xfer_raw_put(const struct scmi_handle *handle,
+ struct scmi_xfer *xfer);
+struct scmi_xfer *scmi_xfer_raw_get(const struct scmi_handle *handle);
+struct scmi_chan_info *
+scmi_xfer_raw_channel_get(const struct scmi_handle *handle, u8 protocol_id);
+
+int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle,
+ struct scmi_xfer *xfer);
+
+int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer,
+ unsigned int timeout_ms);
#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX
extern const struct scmi_desc scmi_mailbox_desc;
#endif
@@ -229,7 +300,6 @@ extern const struct scmi_desc scmi_optee_desc;
#endif
void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
-void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
/* shmem related declarations */
struct scmi_shared_mem;
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index ffdad59ec81f..d21c7eafd641 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -14,7 +14,10 @@
* Copyright (C) 2018-2021 ARM Ltd.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/bitmap.h>
+#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/export.h>
#include <linux/idr.h>
@@ -34,22 +37,15 @@
#include "common.h"
#include "notify.h"
+#include "raw_mode.h"
+
#define CREATE_TRACE_POINTS
#include <trace/events/scmi.h>
-enum scmi_error_codes {
- SCMI_SUCCESS = 0, /* Success */
- SCMI_ERR_SUPPORT = -1, /* Not supported */
- SCMI_ERR_PARAMS = -2, /* Invalid Parameters */
- SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */
- SCMI_ERR_ENTRY = -4, /* Not found */
- SCMI_ERR_RANGE = -5, /* Value out of range */
- SCMI_ERR_BUSY = -6, /* Device busy */
- SCMI_ERR_COMMS = -7, /* Communication Error */
- SCMI_ERR_GENERIC = -8, /* Generic Error */
- SCMI_ERR_HARDWARE = -9, /* Hardware Error */
- SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
-};
+static DEFINE_IDA(scmi_id);
+
+static DEFINE_IDR(scmi_protocols);
+static DEFINE_SPINLOCK(protocol_lock);
/* List of all SCMI devices active in system */
static LIST_HEAD(scmi_list);
@@ -58,18 +54,7 @@ static DEFINE_MUTEX(scmi_list_mutex);
/* Track the unique id for the transfers for debug & profiling purpose */
static atomic_t transfer_last_id;
-static DEFINE_IDR(scmi_requested_devices);
-static DEFINE_MUTEX(scmi_requested_devices_mtx);
-
-/* Track globally the creation of SCMI SystemPower related devices */
-static bool scmi_syspower_registered;
-/* Protect access to scmi_syspower_registered */
-static DEFINE_MUTEX(scmi_syspower_mtx);
-
-struct scmi_requested_dev {
- const struct scmi_device_id *id_table;
- struct list_head node;
-};
+static struct dentry *scmi_top_dentry;
/**
* struct scmi_xfers_info - Structure to manage transfer information
@@ -118,8 +103,23 @@ struct scmi_protocol_instance {
#define ph_to_pi(h) container_of(h, struct scmi_protocol_instance, ph)
/**
+ * struct scmi_debug_info - Debug common info
+ * @top_dentry: A reference to the top debugfs dentry
+ * @name: Name of this SCMI instance
+ * @type: Type of this SCMI instance
+ * @is_atomic: Flag to state if the transport of this instance is atomic
+ */
+struct scmi_debug_info {
+ struct dentry *top_dentry;
+ const char *name;
+ const char *type;
+ bool is_atomic;
+};
+
+/**
* struct scmi_info - Structure representing a SCMI instance
*
+ * @id: A sequence number starting from zero identifying this instance
* @dev: Device pointer
* @desc: SoC description for this instance
* @version: SCMI revision information containing protocol version,
@@ -147,8 +147,15 @@ struct scmi_protocol_instance {
* @notify_priv: Pointer to private data structure specific to notifications.
* @node: List head
* @users: Number of users of this instance
+ * @bus_nb: A notifier to listen for device bind/unbind on the scmi bus
+ * @dev_req_nb: A notifier to listen for device request/unrequest on the scmi
+ * bus
+ * @devreq_mtx: A mutex to serialize device creation for this SCMI instance
+ * @dbg: A pointer to debugfs related data (if any)
+ * @raw: An opaque reference handle used by SCMI Raw mode.
*/
struct scmi_info {
+ int id;
struct device *dev;
const struct scmi_desc *desc;
struct scmi_revision_info version;
@@ -166,32 +173,114 @@ struct scmi_info {
void *notify_priv;
struct list_head node;
int users;
+ struct notifier_block bus_nb;
+ struct notifier_block dev_req_nb;
+ /* Serialize device creation process for this instance */
+ struct mutex devreq_mtx;
+ struct scmi_debug_info *dbg;
+ void *raw;
};
#define handle_to_scmi_info(h) container_of(h, struct scmi_info, handle)
+#define bus_nb_to_scmi_info(nb) container_of(nb, struct scmi_info, bus_nb)
+#define req_nb_to_scmi_info(nb) container_of(nb, struct scmi_info, dev_req_nb)
-static const int scmi_linux_errmap[] = {
- /* better than switch case as long as return value is continuous */
- 0, /* SCMI_SUCCESS */
- -EOPNOTSUPP, /* SCMI_ERR_SUPPORT */
- -EINVAL, /* SCMI_ERR_PARAM */
- -EACCES, /* SCMI_ERR_ACCESS */
- -ENOENT, /* SCMI_ERR_ENTRY */
- -ERANGE, /* SCMI_ERR_RANGE */
- -EBUSY, /* SCMI_ERR_BUSY */
- -ECOMM, /* SCMI_ERR_COMMS */
- -EIO, /* SCMI_ERR_GENERIC */
- -EREMOTEIO, /* SCMI_ERR_HARDWARE */
- -EPROTO, /* SCMI_ERR_PROTOCOL */
-};
+static const struct scmi_protocol *scmi_protocol_get(int protocol_id)
+{
+ const struct scmi_protocol *proto;
+
+ proto = idr_find(&scmi_protocols, protocol_id);
+ if (!proto || !try_module_get(proto->owner)) {
+ pr_warn("SCMI Protocol 0x%x not found!\n", protocol_id);
+ return NULL;
+ }
+
+ pr_debug("Found SCMI Protocol 0x%x\n", protocol_id);
+
+ return proto;
+}
+
+static void scmi_protocol_put(int protocol_id)
+{
+ const struct scmi_protocol *proto;
+
+ proto = idr_find(&scmi_protocols, protocol_id);
+ if (proto)
+ module_put(proto->owner);
+}
+
+int scmi_protocol_register(const struct scmi_protocol *proto)
+{
+ int ret;
+
+ if (!proto) {
+ pr_err("invalid protocol\n");
+ return -EINVAL;
+ }
+
+ if (!proto->instance_init) {
+ pr_err("missing init for protocol 0x%x\n", proto->id);
+ return -EINVAL;
+ }
+
+ spin_lock(&protocol_lock);
+ ret = idr_alloc(&scmi_protocols, (void *)proto,
+ proto->id, proto->id + 1, GFP_ATOMIC);
+ spin_unlock(&protocol_lock);
+ if (ret != proto->id) {
+ pr_err("unable to allocate SCMI idr slot for 0x%x - err %d\n",
+ proto->id, ret);
+ return ret;
+ }
+
+ pr_debug("Registered SCMI Protocol 0x%x\n", proto->id);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(scmi_protocol_register);
+
+void scmi_protocol_unregister(const struct scmi_protocol *proto)
+{
+ spin_lock(&protocol_lock);
+ idr_remove(&scmi_protocols, proto->id);
+ spin_unlock(&protocol_lock);
-static inline int scmi_to_linux_errno(int errno)
+ pr_debug("Unregistered SCMI Protocol 0x%x\n", proto->id);
+}
+EXPORT_SYMBOL_GPL(scmi_protocol_unregister);
+
+/**
+ * scmi_create_protocol_devices - Create devices for all pending requests for
+ * this SCMI instance.
+ *
+ * @np: The device node describing the protocol
+ * @info: The SCMI instance descriptor
+ * @prot_id: The protocol ID
+ * @name: The optional name of the device to be created: if not provided this
+ * call will lead to the creation of all the devices currently requested
+ * for the specified protocol.
+ */
+static void scmi_create_protocol_devices(struct device_node *np,
+ struct scmi_info *info,
+ int prot_id, const char *name)
{
- int err_idx = -errno;
+ struct scmi_device *sdev;
- if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
- return scmi_linux_errmap[err_idx];
- return -EIO;
+ mutex_lock(&info->devreq_mtx);
+ sdev = scmi_device_create(np, info->dev, prot_id, name);
+ if (name && !sdev)
+ dev_err(info->dev,
+ "failed to create device for protocol 0x%X (%s)\n",
+ prot_id, name);
+ mutex_unlock(&info->devreq_mtx);
+}
+
+static void scmi_destroy_protocol_devices(struct scmi_info *info,
+ int prot_id, const char *name)
+{
+ mutex_lock(&info->devreq_mtx);
+ scmi_device_destroy(info->dev, prot_id, name);
+ mutex_unlock(&info->devreq_mtx);
}
void scmi_notification_instance_data_set(const struct scmi_handle *handle,
@@ -311,8 +400,6 @@ static int scmi_xfer_token_set(struct scmi_xfers_info *minfo,
if (xfer_id != next_token)
atomic_add((int)(xfer_id - next_token), &transfer_last_id);
- /* Set in-flight */
- set_bit(xfer_id, minfo->xfer_alloc_table);
xfer->hdr.seq = (u16)xfer_id;
return 0;
@@ -331,32 +418,123 @@ static inline void scmi_xfer_token_clear(struct scmi_xfers_info *minfo,
}
/**
+ * scmi_xfer_inflight_register_unlocked - Register the xfer as in-flight
+ *
+ * @xfer: The xfer to register
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ *
+ * Note that this helper assumes that the xfer to be registered as in-flight
+ * had been built using an xfer sequence number which still corresponds to a
+ * free slot in the xfer_alloc_table.
+ *
+ * Context: Assumes to be called with @xfer_lock already acquired.
+ */
+static inline void
+scmi_xfer_inflight_register_unlocked(struct scmi_xfer *xfer,
+ struct scmi_xfers_info *minfo)
+{
+ /* Set in-flight */
+ set_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
+ hash_add(minfo->pending_xfers, &xfer->node, xfer->hdr.seq);
+ xfer->pending = true;
+}
+
+/**
+ * scmi_xfer_inflight_register - Try to register an xfer as in-flight
+ *
+ * @xfer: The xfer to register
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ *
+ * Note that this helper does NOT assume anything about the sequence number
+ * that was baked into the provided xfer, so it checks at first if it can
+ * be mapped to a free slot and fails with an error if another xfer with the
+ * same sequence number is currently still registered as in-flight.
+ *
+ * Return: 0 on Success or -EBUSY if sequence number embedded in the xfer
+ * could not rbe mapped to a free slot in the xfer_alloc_table.
+ */
+static int scmi_xfer_inflight_register(struct scmi_xfer *xfer,
+ struct scmi_xfers_info *minfo)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ if (!test_bit(xfer->hdr.seq, minfo->xfer_alloc_table))
+ scmi_xfer_inflight_register_unlocked(xfer, minfo);
+ else
+ ret = -EBUSY;
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+ return ret;
+}
+
+/**
+ * scmi_xfer_raw_inflight_register - An helper to register the given xfer as in
+ * flight on the TX channel, if possible.
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: The xfer to register
+ *
+ * Return: 0 on Success, error otherwise
+ */
+int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ return scmi_xfer_inflight_register(xfer, &info->tx_minfo);
+}
+
+/**
+ * scmi_xfer_pending_set - Pick a proper sequence number and mark the xfer
+ * as pending in-flight
+ *
+ * @xfer: The xfer to act upon
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ *
+ * Return: 0 on Success or error otherwise
+ */
+static inline int scmi_xfer_pending_set(struct scmi_xfer *xfer,
+ struct scmi_xfers_info *minfo)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ /* Set a new monotonic token as the xfer sequence number */
+ ret = scmi_xfer_token_set(minfo, xfer);
+ if (!ret)
+ scmi_xfer_inflight_register_unlocked(xfer, minfo);
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+ return ret;
+}
+
+/**
* scmi_xfer_get() - Allocate one message
*
* @handle: Pointer to SCMI entity handle
* @minfo: Pointer to Tx/Rx Message management info based on channel type
- * @set_pending: If true a monotonic token is picked and the xfer is added to
- * the pending hash table.
*
* Helper function which is used by various message functions that are
* exposed to clients of this driver for allocating a message traffic event.
*
- * Picks an xfer from the free list @free_xfers (if any available) and, if
- * required, sets a monotonically increasing token and stores the inflight xfer
- * into the @pending_xfers hashtable for later retrieval.
+ * Picks an xfer from the free list @free_xfers (if any available) and perform
+ * a basic initialization.
+ *
+ * Note that, at this point, still no sequence number is assigned to the
+ * allocated xfer, nor it is registered as a pending transaction.
*
* The successfully initialized xfer is refcounted.
*
- * Context: Holds @xfer_lock while manipulating @xfer_alloc_table and
- * @free_xfers.
+ * Context: Holds @xfer_lock while manipulating @free_xfers.
*
- * Return: 0 if all went fine, else corresponding error.
+ * Return: An initialized xfer if all went fine, else pointer error.
*/
static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
- struct scmi_xfers_info *minfo,
- bool set_pending)
+ struct scmi_xfers_info *minfo)
{
- int ret;
unsigned long flags;
struct scmi_xfer *xfer;
@@ -376,31 +554,71 @@ static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
*/
xfer->transfer_id = atomic_inc_return(&transfer_last_id);
- if (set_pending) {
- /* Pick and set monotonic token */
- ret = scmi_xfer_token_set(minfo, xfer);
- if (!ret) {
- hash_add(minfo->pending_xfers, &xfer->node,
- xfer->hdr.seq);
- xfer->pending = true;
- } else {
- dev_err(handle->dev,
- "Failed to get monotonic token %d\n", ret);
- hlist_add_head(&xfer->node, &minfo->free_xfers);
- xfer = ERR_PTR(ret);
- }
- }
-
- if (!IS_ERR(xfer)) {
- refcount_set(&xfer->users, 1);
- atomic_set(&xfer->busy, SCMI_XFER_FREE);
- }
+ refcount_set(&xfer->users, 1);
+ atomic_set(&xfer->busy, SCMI_XFER_FREE);
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
return xfer;
}
/**
+ * scmi_xfer_raw_get - Helper to get a bare free xfer from the TX channel
+ *
+ * @handle: Pointer to SCMI entity handle
+ *
+ * Note that xfer is taken from the TX channel structures.
+ *
+ * Return: A valid xfer on Success, or an error-pointer otherwise
+ */
+struct scmi_xfer *scmi_xfer_raw_get(const struct scmi_handle *handle)
+{
+ struct scmi_xfer *xfer;
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ xfer = scmi_xfer_get(handle, &info->tx_minfo);
+ if (!IS_ERR(xfer))
+ xfer->flags |= SCMI_XFER_FLAG_IS_RAW;
+
+ return xfer;
+}
+
+/**
+ * scmi_xfer_raw_channel_get - Helper to get a reference to the proper channel
+ * to use for a specific protocol_id Raw transaction.
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @protocol_id: Identifier of the protocol
+ *
+ * Note that in a regular SCMI stack, usually, a protocol has to be defined in
+ * the DT to have an associated channel and be usable; but in Raw mode any
+ * protocol in range is allowed, re-using the Base channel, so as to enable
+ * fuzzing on any protocol without the need of a fully compiled DT.
+ *
+ * Return: A reference to the channel to use, or an ERR_PTR
+ */
+struct scmi_chan_info *
+scmi_xfer_raw_channel_get(const struct scmi_handle *handle, u8 protocol_id)
+{
+ struct scmi_chan_info *cinfo;
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ cinfo = idr_find(&info->tx_idr, protocol_id);
+ if (!cinfo) {
+ if (protocol_id == SCMI_PROTOCOL_BASE)
+ return ERR_PTR(-EINVAL);
+ /* Use Base channel for protocols not defined for DT */
+ cinfo = idr_find(&info->tx_idr, SCMI_PROTOCOL_BASE);
+ if (!cinfo)
+ return ERR_PTR(-EINVAL);
+ dev_warn_once(handle->dev,
+ "Using Base channel for protocol 0x%X\n",
+ protocol_id);
+ }
+
+ return cinfo;
+}
+
+/**
* __scmi_xfer_put() - Release a message
*
* @minfo: Pointer to Tx/Rx Message management info based on channel type
@@ -429,6 +647,24 @@ __scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
}
/**
+ * scmi_xfer_raw_put - Release an xfer that was taken by @scmi_xfer_raw_get
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: A reference to the xfer to put
+ *
+ * Note that as with other xfer_put() handlers the xfer is really effectively
+ * released only if there are no more users on the system.
+ */
+void scmi_xfer_raw_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
+{
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ xfer->flags &= ~SCMI_XFER_FLAG_IS_RAW;
+ xfer->flags &= ~SCMI_XFER_FLAG_CHAN_SET;
+ return __scmi_xfer_put(&info->tx_minfo, xfer);
+}
+
+/**
* scmi_xfer_lookup_unlocked - Helper to lookup an xfer_id
*
* @minfo: Pointer to Tx/Rx Message management info based on channel type
@@ -623,25 +859,6 @@ static inline void scmi_clear_channel(struct scmi_info *info,
info->desc->ops->clear_channel(cinfo);
}
-static inline bool is_polling_required(struct scmi_chan_info *cinfo,
- struct scmi_info *info)
-{
- return cinfo->no_completion_irq || info->desc->force_polling;
-}
-
-static inline bool is_transport_polling_capable(struct scmi_info *info)
-{
- return info->desc->ops->poll_done ||
- info->desc->sync_cmds_completed_on_ret;
-}
-
-static inline bool is_polling_enabled(struct scmi_chan_info *cinfo,
- struct scmi_info *info)
-{
- return is_polling_required(cinfo, info) &&
- is_transport_polling_capable(info);
-}
-
static void scmi_handle_notification(struct scmi_chan_info *cinfo,
u32 msg_hdr, void *priv)
{
@@ -652,7 +869,7 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo,
ktime_t ts;
ts = ktime_get_boottime();
- xfer = scmi_xfer_get(cinfo->handle, minfo, false);
+ xfer = scmi_xfer_get(cinfo->handle, minfo);
if (IS_ERR(xfer)) {
dev_err(dev, "failed to get free message slot (%ld)\n",
PTR_ERR(xfer));
@@ -667,9 +884,9 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo,
info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size,
xfer);
- trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id, "NOTI",
- xfer->hdr.seq, xfer->hdr.status,
- xfer->rx.buf, xfer->rx.len);
+ trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id,
+ xfer->hdr.id, "NOTI", xfer->hdr.seq,
+ xfer->hdr.status, xfer->rx.buf, xfer->rx.len);
scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts);
@@ -678,6 +895,12 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo,
xfer->hdr.protocol_id, xfer->hdr.seq,
MSG_TYPE_NOTIFICATION);
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
+ xfer->hdr.seq = MSG_XTRACT_TOKEN(msg_hdr);
+ scmi_raw_message_report(info->raw, xfer, SCMI_RAW_NOTIF_QUEUE,
+ cinfo->id);
+ }
+
__scmi_xfer_put(minfo, xfer);
scmi_clear_channel(info, cinfo);
@@ -691,6 +914,9 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo,
xfer = scmi_xfer_command_acquire(cinfo, msg_hdr);
if (IS_ERR(xfer)) {
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT))
+ scmi_raw_error_report(info->raw, cinfo, msg_hdr, priv);
+
if (MSG_XTRACT_TYPE(msg_hdr) == MSG_TYPE_DELAYED_RESP)
scmi_clear_channel(info, cinfo);
return;
@@ -705,9 +931,11 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo,
smp_store_mb(xfer->priv, priv);
info->desc->ops->fetch_response(cinfo, xfer);
- trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id,
+ trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id,
+ xfer->hdr.id,
xfer->hdr.type == MSG_TYPE_DELAYED_RESP ?
- "DLYD" : "RESP",
+ (!SCMI_XFER_IS_RAW(xfer) ? "DLYD" : "dlyd") :
+ (!SCMI_XFER_IS_RAW(xfer) ? "RESP" : "resp"),
xfer->hdr.seq, xfer->hdr.status,
xfer->rx.buf, xfer->rx.len);
@@ -722,6 +950,18 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo,
complete(&xfer->done);
}
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
+ /*
+ * When in polling mode avoid to queue the Raw xfer on the IRQ
+ * RX path since it will be already queued at the end of the TX
+ * poll loop.
+ */
+ if (!xfer->hdr.poll_completion)
+ scmi_raw_message_report(info->raw, xfer,
+ SCMI_RAW_REPLY_QUEUE,
+ cinfo->id);
+ }
+
scmi_xfer_command_release(info, xfer);
}
@@ -785,36 +1025,18 @@ static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
ktime_after(ktime_get(), stop);
}
-/**
- * scmi_wait_for_message_response - An helper to group all the possible ways of
- * waiting for a synchronous message response.
- *
- * @cinfo: SCMI channel info
- * @xfer: Reference to the transfer being waited for.
- *
- * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on
- * configuration flags like xfer->hdr.poll_completion.
- *
- * Return: 0 on Success, error otherwise.
- */
-static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
- struct scmi_xfer *xfer)
+static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
+ struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer, unsigned int timeout_ms)
{
- struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
- struct device *dev = info->dev;
- int ret = 0, timeout_ms = info->desc->max_rx_timeout_ms;
-
- trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id,
- xfer->hdr.protocol_id, xfer->hdr.seq,
- timeout_ms,
- xfer->hdr.poll_completion);
+ int ret = 0;
if (xfer->hdr.poll_completion) {
/*
* Real polling is needed only if transport has NOT declared
* itself to support synchronous commands replies.
*/
- if (!info->desc->sync_cmds_completed_on_ret) {
+ if (!desc->sync_cmds_completed_on_ret) {
/*
* Poll on xfer using transport provided .poll_done();
* assumes no completion interrupt was available.
@@ -833,6 +1055,8 @@ static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
if (!ret) {
unsigned long flags;
+ struct scmi_info *info =
+ handle_to_scmi_info(cinfo->handle);
/*
* Do not fetch_response if an out-of-order delayed
@@ -840,16 +1064,27 @@ static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
*/
spin_lock_irqsave(&xfer->lock, flags);
if (xfer->state == SCMI_XFER_SENT_OK) {
- info->desc->ops->fetch_response(cinfo, xfer);
+ desc->ops->fetch_response(cinfo, xfer);
xfer->state = SCMI_XFER_RESP_OK;
}
spin_unlock_irqrestore(&xfer->lock, flags);
/* Trace polled replies. */
- trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id,
- "RESP",
+ trace_scmi_msg_dump(info->id, cinfo->id,
+ xfer->hdr.protocol_id, xfer->hdr.id,
+ !SCMI_XFER_IS_RAW(xfer) ?
+ "RESP" : "resp",
xfer->hdr.seq, xfer->hdr.status,
xfer->rx.buf, xfer->rx.len);
+
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
+ struct scmi_info *info =
+ handle_to_scmi_info(cinfo->handle);
+
+ scmi_raw_message_report(info->raw, xfer,
+ SCMI_RAW_REPLY_QUEUE,
+ cinfo->id);
+ }
}
} else {
/* And we wait for the response. */
@@ -865,6 +1100,59 @@ static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
}
/**
+ * scmi_wait_for_message_response - An helper to group all the possible ways of
+ * waiting for a synchronous message response.
+ *
+ * @cinfo: SCMI channel info
+ * @xfer: Reference to the transfer being waited for.
+ *
+ * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on
+ * configuration flags like xfer->hdr.poll_completion.
+ *
+ * Return: 0 on Success, error otherwise.
+ */
+static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct device *dev = info->dev;
+
+ trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq,
+ info->desc->max_rx_timeout_ms,
+ xfer->hdr.poll_completion);
+
+ return scmi_wait_for_reply(dev, info->desc, cinfo, xfer,
+ info->desc->max_rx_timeout_ms);
+}
+
+/**
+ * scmi_xfer_raw_wait_for_message_response - An helper to wait for a message
+ * reply to an xfer raw request on a specific channel for the required timeout.
+ *
+ * @cinfo: SCMI channel info
+ * @xfer: Reference to the transfer being waited for.
+ * @timeout_ms: The maximum timeout in milliseconds
+ *
+ * Return: 0 on Success, error otherwise.
+ */
+int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer,
+ unsigned int timeout_ms)
+{
+ int ret;
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct device *dev = info->dev;
+
+ ret = scmi_wait_for_reply(dev, info->desc, cinfo, xfer, timeout_ms);
+ if (ret)
+ dev_dbg(dev, "timed out in RAW response - HDR:%08X\n",
+ pack_scmi_header(&xfer->hdr));
+
+ return ret;
+}
+
+/**
* do_xfer() - Do one transfer
*
* @ph: Pointer to SCMI protocol handle
@@ -884,7 +1172,8 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
struct scmi_chan_info *cinfo;
/* Check for polling request on custom command xfers at first */
- if (xfer->hdr.poll_completion && !is_transport_polling_capable(info)) {
+ if (xfer->hdr.poll_completion &&
+ !is_transport_polling_capable(info->desc)) {
dev_warn_once(dev,
"Polling mode is not supported by transport.\n");
return -EINVAL;
@@ -895,7 +1184,7 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
return -EINVAL;
/* True ONLY if also supported by transport. */
- if (is_polling_enabled(cinfo, info))
+ if (is_polling_enabled(cinfo, info->desc))
xfer->hdr.poll_completion = true;
/*
@@ -928,9 +1217,9 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
return ret;
}
- trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id, "CMND",
- xfer->hdr.seq, xfer->hdr.status,
- xfer->tx.buf, xfer->tx.len);
+ trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id,
+ xfer->hdr.id, "CMND", xfer->hdr.seq,
+ xfer->hdr.status, xfer->tx.buf, xfer->tx.len);
ret = scmi_wait_for_message_response(cinfo, xfer);
if (!ret && xfer->hdr.status)
@@ -954,8 +1243,6 @@ static void reset_rx_to_maxsz(const struct scmi_protocol_handle *ph,
xfer->rx.len = info->desc->max_msg_size;
}
-#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
-
/**
* do_xfer_with_response() - Do one transfer and wait until the delayed
* response is received
@@ -1043,13 +1330,22 @@ static int xfer_get_init(const struct scmi_protocol_handle *ph,
tx_size > info->desc->max_msg_size)
return -ERANGE;
- xfer = scmi_xfer_get(pi->handle, minfo, true);
+ xfer = scmi_xfer_get(pi->handle, minfo);
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(dev, "failed to get free message slot(%d)\n", ret);
return ret;
}
+ /* Pick a sequence number and register this xfer as in-flight */
+ ret = scmi_xfer_pending_set(xfer, minfo);
+ if (ret) {
+ dev_err(pi->handle->dev,
+ "Failed to get monotonic token %d\n", ret);
+ __scmi_xfer_put(minfo, xfer);
+ return ret;
+ }
+
xfer->tx.len = tx_size;
xfer->rx.len = rx_size ? : info->desc->max_msg_size;
xfer->hdr.type = MSG_TYPE_COMMAND;
@@ -1822,20 +2118,14 @@ static bool scmi_is_transport_atomic(const struct scmi_handle *handle,
bool ret;
struct scmi_info *info = handle_to_scmi_info(handle);
- ret = info->desc->atomic_enabled && is_transport_polling_capable(info);
+ ret = info->desc->atomic_enabled &&
+ is_transport_polling_capable(info->desc);
if (ret && atomic_threshold)
*atomic_threshold = info->atomic_threshold;
return ret;
}
-static inline
-struct scmi_handle *scmi_handle_get_from_info_unlocked(struct scmi_info *info)
-{
- info->users++;
- return &info->handle;
-}
-
/**
* scmi_handle_get() - Get the SCMI handle for a device
*
@@ -1847,7 +2137,7 @@ struct scmi_handle *scmi_handle_get_from_info_unlocked(struct scmi_info *info)
*
* Return: pointer to handle if successful, NULL on error
*/
-struct scmi_handle *scmi_handle_get(struct device *dev)
+static struct scmi_handle *scmi_handle_get(struct device *dev)
{
struct list_head *p;
struct scmi_info *info;
@@ -1857,7 +2147,8 @@ struct scmi_handle *scmi_handle_get(struct device *dev)
list_for_each(p, &scmi_list) {
info = list_entry(p, struct scmi_info, node);
if (dev->parent == info->dev) {
- handle = scmi_handle_get_from_info_unlocked(info);
+ info->users++;
+ handle = &info->handle;
break;
}
}
@@ -1878,7 +2169,7 @@ struct scmi_handle *scmi_handle_get(struct device *dev)
* Return: 0 is successfully released
* if null was passed, it returns -EINVAL;
*/
-int scmi_handle_put(const struct scmi_handle *handle)
+static int scmi_handle_put(const struct scmi_handle *handle)
{
struct scmi_info *info;
@@ -1894,6 +2185,23 @@ int scmi_handle_put(const struct scmi_handle *handle)
return 0;
}
+static void scmi_device_link_add(struct device *consumer,
+ struct device *supplier)
+{
+ struct device_link *link;
+
+ link = device_link_add(consumer, supplier, DL_FLAG_AUTOREMOVE_CONSUMER);
+
+ WARN_ON(!link);
+}
+
+static void scmi_set_handle(struct scmi_device *scmi_dev)
+{
+ scmi_dev->handle = scmi_handle_get(&scmi_dev->dev);
+ if (scmi_dev->handle)
+ scmi_device_link_add(&scmi_dev->dev, scmi_dev->handle->dev);
+}
+
static int __scmi_xfer_info_init(struct scmi_info *sinfo,
struct scmi_xfers_info *info)
{
@@ -1987,23 +2295,20 @@ static int scmi_xfer_info_init(struct scmi_info *sinfo)
return ret;
}
-static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
+static int scmi_chan_setup(struct scmi_info *info, struct device_node *of_node,
int prot_id, bool tx)
{
int ret, idx;
+ char name[32];
struct scmi_chan_info *cinfo;
struct idr *idr;
+ struct scmi_device *tdev = NULL;
/* Transmit channel is first entry i.e. index 0 */
idx = tx ? 0 : 1;
idr = tx ? &info->tx_idr : &info->rx_idr;
- /* check if already allocated, used for multiple device per protocol */
- cinfo = idr_find(idr, prot_id);
- if (cinfo)
- return 0;
-
- if (!info->desc->ops->chan_available(dev, idx)) {
+ if (!info->desc->ops->chan_available(of_node, idx)) {
cinfo = idr_find(idr, SCMI_PROTOCOL_BASE);
if (unlikely(!cinfo)) /* Possible only if platform has no Rx */
return -EINVAL;
@@ -2014,27 +2319,52 @@ static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
if (!cinfo)
return -ENOMEM;
- cinfo->dev = dev;
cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms;
+ /* Create a unique name for this transport device */
+ snprintf(name, 32, "__scmi_transport_device_%s_%02X",
+ idx ? "rx" : "tx", prot_id);
+ /* Create a uniquely named, dedicated transport device for this chan */
+ tdev = scmi_device_create(of_node, info->dev, prot_id, name);
+ if (!tdev) {
+ dev_err(info->dev,
+ "failed to create transport device (%s)\n", name);
+ devm_kfree(info->dev, cinfo);
+ return -EINVAL;
+ }
+ of_node_get(of_node);
+
+ cinfo->id = prot_id;
+ cinfo->dev = &tdev->dev;
ret = info->desc->ops->chan_setup(cinfo, info->dev, tx);
- if (ret)
+ if (ret) {
+ of_node_put(of_node);
+ scmi_device_destroy(info->dev, prot_id, name);
+ devm_kfree(info->dev, cinfo);
return ret;
+ }
- if (tx && is_polling_required(cinfo, info)) {
- if (is_transport_polling_capable(info))
- dev_info(dev,
+ if (tx && is_polling_required(cinfo, info->desc)) {
+ if (is_transport_polling_capable(info->desc))
+ dev_info(&tdev->dev,
"Enabled polling mode TX channel - prot_id:%d\n",
prot_id);
else
- dev_warn(dev,
+ dev_warn(&tdev->dev,
"Polling mode NOT supported by transport.\n");
}
idr_alloc:
ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
if (ret != prot_id) {
- dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret);
+ dev_err(info->dev,
+ "unable to allocate SCMI idr slot err %d\n", ret);
+ /* Destroy channel and device only if created by this call. */
+ if (tdev) {
+ of_node_put(of_node);
+ scmi_device_destroy(info->dev, prot_id, name);
+ devm_kfree(info->dev, cinfo);
+ }
return ret;
}
@@ -2043,13 +2373,14 @@ idr_alloc:
}
static inline int
-scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
+scmi_txrx_setup(struct scmi_info *info, struct device_node *of_node,
+ int prot_id)
{
- int ret = scmi_chan_setup(info, dev, prot_id, true);
+ int ret = scmi_chan_setup(info, of_node, prot_id, true);
if (!ret) {
/* Rx is optional, report only memory errors */
- ret = scmi_chan_setup(info, dev, prot_id, false);
+ ret = scmi_chan_setup(info, of_node, prot_id, false);
if (ret && ret != -ENOMEM)
ret = 0;
}
@@ -2058,306 +2389,264 @@ scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
}
/**
- * scmi_get_protocol_device - Helper to get/create an SCMI device.
- *
- * @np: A device node representing a valid active protocols for the referred
- * SCMI instance.
- * @info: The referred SCMI instance for which we are getting/creating this
- * device.
- * @prot_id: The protocol ID.
- * @name: The device name.
- *
- * Referring to the specific SCMI instance identified by @info, this helper
- * takes care to return a properly initialized device matching the requested
- * @proto_id and @name: if device was still not existent it is created as a
- * child of the specified SCMI instance @info and its transport properly
- * initialized as usual.
- *
- * Return: A properly initialized scmi device, NULL otherwise.
+ * scmi_channels_setup - Helper to initialize all required channels
+ *
+ * @info: The SCMI instance descriptor.
+ *
+ * Initialize all the channels found described in the DT against the underlying
+ * configured transport using custom defined dedicated devices instead of
+ * borrowing devices from the SCMI drivers; this way channels are initialized
+ * upfront during core SCMI stack probing and are no more coupled with SCMI
+ * devices used by SCMI drivers.
+ *
+ * Note that, even though a pair of TX/RX channels is associated to each
+ * protocol defined in the DT, a distinct freshly initialized channel is
+ * created only if the DT node for the protocol at hand describes a dedicated
+ * channel: in all the other cases the common BASE protocol channel is reused.
+ *
+ * Return: 0 on Success
*/
-static inline struct scmi_device *
-scmi_get_protocol_device(struct device_node *np, struct scmi_info *info,
- int prot_id, const char *name)
+static int scmi_channels_setup(struct scmi_info *info)
{
- struct scmi_device *sdev;
+ int ret;
+ struct device_node *child, *top_np = info->dev->of_node;
- /* Already created for this parent SCMI instance ? */
- sdev = scmi_child_dev_find(info->dev, prot_id, name);
- if (sdev)
- return sdev;
+ /* Initialize a common generic channel at first */
+ ret = scmi_txrx_setup(info, top_np, SCMI_PROTOCOL_BASE);
+ if (ret)
+ return ret;
- mutex_lock(&scmi_syspower_mtx);
- if (prot_id == SCMI_PROTOCOL_SYSTEM && scmi_syspower_registered) {
- dev_warn(info->dev,
- "SCMI SystemPower protocol device must be unique !\n");
- mutex_unlock(&scmi_syspower_mtx);
+ for_each_available_child_of_node(top_np, child) {
+ u32 prot_id;
- return NULL;
+ if (of_property_read_u32(child, "reg", &prot_id))
+ continue;
+
+ if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id))
+ dev_err(info->dev,
+ "Out of range protocol %d\n", prot_id);
+
+ ret = scmi_txrx_setup(info, child, prot_id);
+ if (ret) {
+ of_node_put(child);
+ return ret;
+ }
}
- pr_debug("Creating SCMI device (%s) for protocol %x\n", name, prot_id);
+ return 0;
+}
- sdev = scmi_device_create(np, info->dev, prot_id, name);
- if (!sdev) {
- dev_err(info->dev, "failed to create %d protocol device\n",
- prot_id);
- mutex_unlock(&scmi_syspower_mtx);
+static int scmi_chan_destroy(int id, void *p, void *idr)
+{
+ struct scmi_chan_info *cinfo = p;
- return NULL;
+ if (cinfo->dev) {
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct scmi_device *sdev = to_scmi_dev(cinfo->dev);
+
+ of_node_put(cinfo->dev->of_node);
+ scmi_device_destroy(info->dev, id, sdev->name);
+ cinfo->dev = NULL;
}
- if (scmi_txrx_setup(info, &sdev->dev, prot_id)) {
- dev_err(&sdev->dev, "failed to setup transport\n");
- scmi_device_destroy(sdev);
- mutex_unlock(&scmi_syspower_mtx);
+ idr_remove(idr, id);
- return NULL;
- }
+ return 0;
+}
- if (prot_id == SCMI_PROTOCOL_SYSTEM)
- scmi_syspower_registered = true;
+static void scmi_cleanup_channels(struct scmi_info *info, struct idr *idr)
+{
+ /* At first free all channels at the transport layer ... */
+ idr_for_each(idr, info->desc->ops->chan_free, idr);
- mutex_unlock(&scmi_syspower_mtx);
+ /* ...then destroy all underlying devices */
+ idr_for_each(idr, scmi_chan_destroy, idr);
- return sdev;
+ idr_destroy(idr);
}
-static inline void
-scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
- int prot_id, const char *name)
+static void scmi_cleanup_txrx_channels(struct scmi_info *info)
{
- struct scmi_device *sdev;
-
- sdev = scmi_get_protocol_device(np, info, prot_id, name);
- if (!sdev)
- return;
+ scmi_cleanup_channels(info, &info->tx_idr);
- /* setup handle now as the transport is ready */
- scmi_set_handle(sdev);
+ scmi_cleanup_channels(info, &info->rx_idr);
}
-/**
- * scmi_create_protocol_devices - Create devices for all pending requests for
- * this SCMI instance.
- *
- * @np: The device node describing the protocol
- * @info: The SCMI instance descriptor
- * @prot_id: The protocol ID
- *
- * All devices previously requested for this instance (if any) are found and
- * created by scanning the proper @&scmi_requested_devices entry.
- */
-static void scmi_create_protocol_devices(struct device_node *np,
- struct scmi_info *info, int prot_id)
+static int scmi_bus_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
{
- struct list_head *phead;
+ struct scmi_info *info = bus_nb_to_scmi_info(nb);
+ struct scmi_device *sdev = to_scmi_dev(data);
- mutex_lock(&scmi_requested_devices_mtx);
- phead = idr_find(&scmi_requested_devices, prot_id);
- if (phead) {
- struct scmi_requested_dev *rdev;
+ /* Skip transport devices and devices of different SCMI instances */
+ if (!strncmp(sdev->name, "__scmi_transport_device", 23) ||
+ sdev->dev.parent != info->dev)
+ return NOTIFY_DONE;
- list_for_each_entry(rdev, phead, node)
- scmi_create_protocol_device(np, info, prot_id,
- rdev->id_table->name);
+ switch (action) {
+ case BUS_NOTIFY_BIND_DRIVER:
+ /* setup handle now as the transport is ready */
+ scmi_set_handle(sdev);
+ break;
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ scmi_handle_put(sdev->handle);
+ sdev->handle = NULL;
+ break;
+ default:
+ return NOTIFY_DONE;
}
- mutex_unlock(&scmi_requested_devices_mtx);
+
+ dev_dbg(info->dev, "Device %s (%s) is now %s\n", dev_name(&sdev->dev),
+ sdev->name, action == BUS_NOTIFY_BIND_DRIVER ?
+ "about to be BOUND." : "UNBOUND.");
+
+ return NOTIFY_OK;
}
-/**
- * scmi_protocol_device_request - Helper to request a device
- *
- * @id_table: A protocol/name pair descriptor for the device to be created.
- *
- * This helper let an SCMI driver request specific devices identified by the
- * @id_table to be created for each active SCMI instance.
- *
- * The requested device name MUST NOT be already existent for any protocol;
- * at first the freshly requested @id_table is annotated in the IDR table
- * @scmi_requested_devices, then a matching device is created for each already
- * active SCMI instance. (if any)
- *
- * This way the requested device is created straight-away for all the already
- * initialized(probed) SCMI instances (handles) and it remains also annotated
- * as pending creation if the requesting SCMI driver was loaded before some
- * SCMI instance and related transports were available: when such late instance
- * is probed, its probe will take care to scan the list of pending requested
- * devices and create those on its own (see @scmi_create_protocol_devices and
- * its enclosing loop)
- *
- * Return: 0 on Success
- */
-int scmi_protocol_device_request(const struct scmi_device_id *id_table)
+static int scmi_device_request_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
{
- int ret = 0;
- unsigned int id = 0;
- struct list_head *head, *phead = NULL;
- struct scmi_requested_dev *rdev;
- struct scmi_info *info;
+ struct device_node *np;
+ struct scmi_device_id *id_table = data;
+ struct scmi_info *info = req_nb_to_scmi_info(nb);
- pr_debug("Requesting SCMI device (%s) for protocol %x\n",
- id_table->name, id_table->protocol_id);
+ np = idr_find(&info->active_protocols, id_table->protocol_id);
+ if (!np)
+ return NOTIFY_DONE;
- /*
- * Search for the matching protocol rdev list and then search
- * of any existent equally named device...fails if any duplicate found.
- */
- mutex_lock(&scmi_requested_devices_mtx);
- idr_for_each_entry(&scmi_requested_devices, head, id) {
- if (!phead) {
- /* A list found registered in the IDR is never empty */
- rdev = list_first_entry(head, struct scmi_requested_dev,
- node);
- if (rdev->id_table->protocol_id ==
- id_table->protocol_id)
- phead = head;
- }
- list_for_each_entry(rdev, head, node) {
- if (!strcmp(rdev->id_table->name, id_table->name)) {
- pr_err("Ignoring duplicate request [%d] %s\n",
- rdev->id_table->protocol_id,
- rdev->id_table->name);
- ret = -EINVAL;
- goto out;
- }
- }
- }
+ dev_dbg(info->dev, "%sRequested device (%s) for protocol 0x%x\n",
+ action == SCMI_BUS_NOTIFY_DEVICE_REQUEST ? "" : "UN-",
+ id_table->name, id_table->protocol_id);
- /*
- * No duplicate found for requested id_table, so let's create a new
- * requested device entry for this new valid request.
- */
- rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
- if (!rdev) {
- ret = -ENOMEM;
- goto out;
+ switch (action) {
+ case SCMI_BUS_NOTIFY_DEVICE_REQUEST:
+ scmi_create_protocol_devices(np, info, id_table->protocol_id,
+ id_table->name);
+ break;
+ case SCMI_BUS_NOTIFY_DEVICE_UNREQUEST:
+ scmi_destroy_protocol_devices(info, id_table->protocol_id,
+ id_table->name);
+ break;
+ default:
+ return NOTIFY_DONE;
}
- rdev->id_table = id_table;
- /*
- * Append the new requested device table descriptor to the head of the
- * related protocol list, eventually creating such head if not already
- * there.
- */
- if (!phead) {
- phead = kzalloc(sizeof(*phead), GFP_KERNEL);
- if (!phead) {
- kfree(rdev);
- ret = -ENOMEM;
- goto out;
- }
- INIT_LIST_HEAD(phead);
-
- ret = idr_alloc(&scmi_requested_devices, (void *)phead,
- id_table->protocol_id,
- id_table->protocol_id + 1, GFP_KERNEL);
- if (ret != id_table->protocol_id) {
- pr_err("Failed to save SCMI device - ret:%d\n", ret);
- kfree(rdev);
- kfree(phead);
- ret = -EINVAL;
- goto out;
- }
- ret = 0;
- }
- list_add(&rdev->node, phead);
+ return NOTIFY_OK;
+}
- /*
- * Now effectively create and initialize the requested device for every
- * already initialized SCMI instance which has registered the requested
- * protocol as a valid active one: i.e. defined in DT and supported by
- * current platform FW.
- */
- mutex_lock(&scmi_list_mutex);
- list_for_each_entry(info, &scmi_list, node) {
- struct device_node *child;
-
- child = idr_find(&info->active_protocols,
- id_table->protocol_id);
- if (child) {
- struct scmi_device *sdev;
-
- sdev = scmi_get_protocol_device(child, info,
- id_table->protocol_id,
- id_table->name);
- if (sdev) {
- /* Set handle if not already set: device existed */
- if (!sdev->handle)
- sdev->handle =
- scmi_handle_get_from_info_unlocked(info);
- /* Relink consumer and suppliers */
- if (sdev->handle)
- scmi_device_link_add(&sdev->dev,
- sdev->handle->dev);
- }
- } else {
- dev_err(info->dev,
- "Failed. SCMI protocol %d not active.\n",
- id_table->protocol_id);
- }
- }
- mutex_unlock(&scmi_list_mutex);
+static void scmi_debugfs_common_cleanup(void *d)
+{
+ struct scmi_debug_info *dbg = d;
-out:
- mutex_unlock(&scmi_requested_devices_mtx);
+ if (!dbg)
+ return;
- return ret;
+ debugfs_remove_recursive(dbg->top_dentry);
+ kfree(dbg->name);
+ kfree(dbg->type);
}
-/**
- * scmi_protocol_device_unrequest - Helper to unrequest a device
- *
- * @id_table: A protocol/name pair descriptor for the device to be unrequested.
- *
- * An helper to let an SCMI driver release its request about devices; note that
- * devices are created and initialized once the first SCMI driver request them
- * but they destroyed only on SCMI core unloading/unbinding.
- *
- * The current SCMI transport layer uses such devices as internal references and
- * as such they could be shared as same transport between multiple drivers so
- * that cannot be safely destroyed till the whole SCMI stack is removed.
- * (unless adding further burden of refcounting.)
- */
-void scmi_protocol_device_unrequest(const struct scmi_device_id *id_table)
+static struct scmi_debug_info *scmi_debugfs_common_setup(struct scmi_info *info)
{
- struct list_head *phead;
+ char top_dir[16];
+ struct dentry *trans, *top_dentry;
+ struct scmi_debug_info *dbg;
+ const char *c_ptr = NULL;
- pr_debug("Unrequesting SCMI device (%s) for protocol %x\n",
- id_table->name, id_table->protocol_id);
+ dbg = devm_kzalloc(info->dev, sizeof(*dbg), GFP_KERNEL);
+ if (!dbg)
+ return NULL;
- mutex_lock(&scmi_requested_devices_mtx);
- phead = idr_find(&scmi_requested_devices, id_table->protocol_id);
- if (phead) {
- struct scmi_requested_dev *victim, *tmp;
+ dbg->name = kstrdup(of_node_full_name(info->dev->of_node), GFP_KERNEL);
+ if (!dbg->name) {
+ devm_kfree(info->dev, dbg);
+ return NULL;
+ }
- list_for_each_entry_safe(victim, tmp, phead, node) {
- if (!strcmp(victim->id_table->name, id_table->name)) {
- list_del(&victim->node);
- kfree(victim);
- break;
- }
- }
+ of_property_read_string(info->dev->of_node, "compatible", &c_ptr);
+ dbg->type = kstrdup(c_ptr, GFP_KERNEL);
+ if (!dbg->type) {
+ kfree(dbg->name);
+ devm_kfree(info->dev, dbg);
+ return NULL;
+ }
- if (list_empty(phead)) {
- idr_remove(&scmi_requested_devices,
- id_table->protocol_id);
- kfree(phead);
- }
+ snprintf(top_dir, 16, "%d", info->id);
+ top_dentry = debugfs_create_dir(top_dir, scmi_top_dentry);
+ trans = debugfs_create_dir("transport", top_dentry);
+
+ dbg->is_atomic = info->desc->atomic_enabled &&
+ is_transport_polling_capable(info->desc);
+
+ debugfs_create_str("instance_name", 0400, top_dentry,
+ (char **)&dbg->name);
+
+ debugfs_create_u32("atomic_threshold_us", 0400, top_dentry,
+ &info->atomic_threshold);
+
+ debugfs_create_str("type", 0400, trans, (char **)&dbg->type);
+
+ debugfs_create_bool("is_atomic", 0400, trans, &dbg->is_atomic);
+
+ debugfs_create_u32("max_rx_timeout_ms", 0400, trans,
+ (u32 *)&info->desc->max_rx_timeout_ms);
+
+ debugfs_create_u32("max_msg_size", 0400, trans,
+ (u32 *)&info->desc->max_msg_size);
+
+ debugfs_create_u32("tx_max_msg", 0400, trans,
+ (u32 *)&info->tx_minfo.max_msg);
+
+ debugfs_create_u32("rx_max_msg", 0400, trans,
+ (u32 *)&info->rx_minfo.max_msg);
+
+ dbg->top_dentry = top_dentry;
+
+ if (devm_add_action_or_reset(info->dev,
+ scmi_debugfs_common_cleanup, dbg)) {
+ scmi_debugfs_common_cleanup(dbg);
+ return NULL;
}
- mutex_unlock(&scmi_requested_devices_mtx);
+
+ return dbg;
}
-static int scmi_cleanup_txrx_channels(struct scmi_info *info)
+static int scmi_debugfs_raw_mode_setup(struct scmi_info *info)
{
- int ret;
- struct idr *idr = &info->tx_idr;
+ int id, num_chans = 0, ret = 0;
+ struct scmi_chan_info *cinfo;
+ u8 channels[SCMI_MAX_CHANNELS] = {};
+ DECLARE_BITMAP(protos, SCMI_MAX_CHANNELS) = {};
+
+ if (!info->dbg)
+ return -EINVAL;
+
+ /* Enumerate all channels to collect their ids */
+ idr_for_each_entry(&info->tx_idr, cinfo, id) {
+ /*
+ * Cannot happen, but be defensive.
+ * Zero as num_chans is ok, warn and carry on.
+ */
+ if (num_chans >= SCMI_MAX_CHANNELS || !cinfo) {
+ dev_warn(info->dev,
+ "SCMI RAW - Error enumerating channels\n");
+ break;
+ }
- ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
- idr_destroy(&info->tx_idr);
+ if (!test_bit(cinfo->id, protos)) {
+ channels[num_chans++] = cinfo->id;
+ set_bit(cinfo->id, protos);
+ }
+ }
- idr = &info->rx_idr;
- ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
- idr_destroy(&info->rx_idr);
+ info->raw = scmi_raw_mode_init(&info->handle, info->dbg->top_dentry,
+ info->id, channels, num_chans,
+ info->desc, info->tx_minfo.max_msg);
+ if (IS_ERR(info->raw)) {
+ dev_err(info->dev, "Failed to initialize SCMI RAW Mode !\n");
+ ret = PTR_ERR(info->raw);
+ info->raw = NULL;
+ }
return ret;
}
@@ -2379,12 +2668,19 @@ static int scmi_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
+ info->id = ida_alloc_min(&scmi_id, 0, GFP_KERNEL);
+ if (info->id < 0)
+ return info->id;
+
info->dev = dev;
info->desc = desc;
+ info->bus_nb.notifier_call = scmi_bus_notifier;
+ info->dev_req_nb.notifier_call = scmi_device_request_notifier;
INIT_LIST_HEAD(&info->node);
idr_init(&info->protocols);
mutex_init(&info->protocols_mtx);
idr_init(&info->active_protocols);
+ mutex_init(&info->devreq_mtx);
platform_set_drvdata(pdev, info);
idr_init(&info->tx_idr);
@@ -2408,21 +2704,55 @@ static int scmi_probe(struct platform_device *pdev)
if (desc->ops->link_supplier) {
ret = desc->ops->link_supplier(dev);
if (ret)
- return ret;
+ goto clear_ida;
}
- ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
+ /* Setup all channels described in the DT at first */
+ ret = scmi_channels_setup(info);
if (ret)
- return ret;
+ goto clear_ida;
- ret = scmi_xfer_info_init(info);
+ ret = bus_register_notifier(&scmi_bus_type, &info->bus_nb);
if (ret)
goto clear_txrx_setup;
+ ret = blocking_notifier_chain_register(&scmi_requested_devices_nh,
+ &info->dev_req_nb);
+ if (ret)
+ goto clear_bus_notifier;
+
+ ret = scmi_xfer_info_init(info);
+ if (ret)
+ goto clear_dev_req_notifier;
+
+ if (scmi_top_dentry) {
+ info->dbg = scmi_debugfs_common_setup(info);
+ if (!info->dbg)
+ dev_warn(dev, "Failed to setup SCMI debugfs.\n");
+
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
+ bool coex =
+ IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX);
+
+ ret = scmi_debugfs_raw_mode_setup(info);
+ if (!coex) {
+ if (ret)
+ goto clear_dev_req_notifier;
+
+ /* Bail out anyway when coex enabled */
+ return ret;
+ }
+
+ /* Coex enabled, carry on in any case. */
+ dev_info(dev, "SCMI RAW Mode COEX enabled !\n");
+ }
+ }
+
if (scmi_notification_init(handle))
dev_err(dev, "SCMI Notifications NOT available.\n");
- if (info->desc->atomic_enabled && !is_transport_polling_capable(info))
+ if (info->desc->atomic_enabled &&
+ !is_transport_polling_capable(info->desc))
dev_err(dev,
"Transport is not polling capable. Atomic mode not supported.\n");
@@ -2469,29 +2799,36 @@ static int scmi_probe(struct platform_device *pdev)
}
of_node_get(child);
- scmi_create_protocol_devices(child, info, prot_id);
+ scmi_create_protocol_devices(child, info, prot_id, NULL);
}
return 0;
notification_exit:
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT))
+ scmi_raw_mode_cleanup(info->raw);
scmi_notification_exit(&info->handle);
+clear_dev_req_notifier:
+ blocking_notifier_chain_unregister(&scmi_requested_devices_nh,
+ &info->dev_req_nb);
+clear_bus_notifier:
+ bus_unregister_notifier(&scmi_bus_type, &info->bus_nb);
clear_txrx_setup:
scmi_cleanup_txrx_channels(info);
+clear_ida:
+ ida_free(&scmi_id, info->id);
return ret;
}
-void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id)
-{
- idr_remove(idr, id);
-}
-
static int scmi_remove(struct platform_device *pdev)
{
- int ret, id;
+ int id;
struct scmi_info *info = platform_get_drvdata(pdev);
struct device_node *child;
+ if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT))
+ scmi_raw_mode_cleanup(info->raw);
+
mutex_lock(&scmi_list_mutex);
if (info->users)
dev_warn(&pdev->dev,
@@ -2509,10 +2846,14 @@ static int scmi_remove(struct platform_device *pdev)
of_node_put(child);
idr_destroy(&info->active_protocols);
+ blocking_notifier_chain_unregister(&scmi_requested_devices_nh,
+ &info->dev_req_nb);
+ bus_unregister_notifier(&scmi_bus_type, &info->bus_nb);
+
/* Safe to free channels since no more users */
- ret = scmi_cleanup_txrx_channels(info);
- if (ret)
- dev_warn(&pdev->dev, "Failed to cleanup SCMI channels.\n");
+ scmi_cleanup_txrx_channels(info);
+
+ ida_free(&scmi_id, info->id);
return 0;
}
@@ -2641,6 +2982,19 @@ static void __exit scmi_transports_exit(void)
__scmi_transports_setup(false);
}
+static struct dentry *scmi_debugfs_init(void)
+{
+ struct dentry *d;
+
+ d = debugfs_create_dir("scmi", NULL);
+ if (IS_ERR(d)) {
+ pr_err("Could NOT create SCMI top dentry.\n");
+ return NULL;
+ }
+
+ return d;
+}
+
static int __init scmi_driver_init(void)
{
int ret;
@@ -2649,13 +3003,14 @@ static int __init scmi_driver_init(void)
if (WARN_ON(!IS_ENABLED(CONFIG_ARM_SCMI_HAVE_TRANSPORT)))
return -EINVAL;
- scmi_bus_init();
-
/* Initialize any compiled-in transport which provided an init/exit */
ret = scmi_transports_init();
if (ret)
return ret;
+ if (IS_ENABLED(CONFIG_ARM_SCMI_NEED_DEBUGFS))
+ scmi_top_dentry = scmi_debugfs_init();
+
scmi_base_register();
scmi_clock_register();
@@ -2669,7 +3024,7 @@ static int __init scmi_driver_init(void)
return platform_driver_register(&scmi_driver);
}
-subsys_initcall(scmi_driver_init);
+module_init(scmi_driver_init);
static void __exit scmi_driver_exit(void)
{
@@ -2684,11 +3039,11 @@ static void __exit scmi_driver_exit(void)
scmi_system_unregister();
scmi_powercap_unregister();
- scmi_bus_exit();
-
scmi_transports_exit();
platform_driver_unregister(&scmi_driver);
+
+ debugfs_remove_recursive(scmi_top_dentry);
}
module_exit(scmi_driver_exit);
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
index 1e40cb035044..0d9c9538b7f4 100644
--- a/drivers/firmware/arm_scmi/mailbox.c
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -46,9 +46,9 @@ static void rx_callback(struct mbox_client *cl, void *m)
scmi_rx_callback(smbox->cinfo, shmem_read_header(smbox->shmem), NULL);
}
-static bool mailbox_chan_available(struct device *dev, int idx)
+static bool mailbox_chan_available(struct device_node *of_node, int idx)
{
- return !of_parse_phandle_with_args(dev->of_node, "mboxes",
+ return !of_parse_phandle_with_args(of_node, "mboxes",
"#mbox-cells", idx, NULL);
}
@@ -120,8 +120,6 @@ static int mailbox_chan_free(int id, void *p, void *data)
smbox->cinfo = NULL;
}
- scmi_free_channel(cinfo, data, id);
-
return 0;
}
diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
index 2a7aeab40e54..929720387102 100644
--- a/drivers/firmware/arm_scmi/optee.c
+++ b/drivers/firmware/arm_scmi/optee.c
@@ -328,11 +328,11 @@ static int scmi_optee_link_supplier(struct device *dev)
return 0;
}
-static bool scmi_optee_chan_available(struct device *dev, int idx)
+static bool scmi_optee_chan_available(struct device_node *of_node, int idx)
{
u32 channel_id;
- return !of_property_read_u32_index(dev->of_node, "linaro,optee-channel-id",
+ return !of_property_read_u32_index(of_node, "linaro,optee-channel-id",
idx, &channel_id);
}
@@ -481,8 +481,6 @@ static int scmi_optee_chan_free(int id, void *p, void *data)
cinfo->transport_info = NULL;
channel->cinfo = NULL;
- scmi_free_channel(cinfo, data, id);
-
return 0;
}
diff --git a/drivers/firmware/arm_scmi/protocols.h b/drivers/firmware/arm_scmi/protocols.h
index 2f3bf691db7c..78e1a01eb656 100644
--- a/drivers/firmware/arm_scmi/protocols.h
+++ b/drivers/firmware/arm_scmi/protocols.h
@@ -115,6 +115,7 @@ struct scmi_msg_hdr {
* - SCMI_XFER_SENT_OK -> SCMI_XFER_RESP_OK [ -> SCMI_XFER_DRESP_OK ]
* - SCMI_XFER_SENT_OK -> SCMI_XFER_DRESP_OK
* (Missing synchronous response is assumed OK and ignored)
+ * @flags: Optional flags associated to this xfer.
* @lock: A spinlock to protect state and busy fields.
* @priv: A pointer for transport private usage.
*/
@@ -135,6 +136,12 @@ struct scmi_xfer {
#define SCMI_XFER_RESP_OK 1
#define SCMI_XFER_DRESP_OK 2
int state;
+#define SCMI_XFER_FLAG_IS_RAW BIT(0)
+#define SCMI_XFER_IS_RAW(x) ((x)->flags & SCMI_XFER_FLAG_IS_RAW)
+#define SCMI_XFER_FLAG_CHAN_SET BIT(1)
+#define SCMI_XFER_IS_CHAN_SET(x) \
+ ((x)->flags & SCMI_XFER_FLAG_CHAN_SET)
+ int flags;
/* A lock to protect state and busy fields */
spinlock_t lock;
void *priv;
diff --git a/drivers/firmware/arm_scmi/raw_mode.c b/drivers/firmware/arm_scmi/raw_mode.c
new file mode 100644
index 000000000000..d40df099fd51
--- /dev/null
+++ b/drivers/firmware/arm_scmi/raw_mode.c
@@ -0,0 +1,1443 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Raw mode support
+ *
+ * Copyright (C) 2022 ARM Ltd.
+ */
+/**
+ * DOC: Theory of operation
+ *
+ * When enabled the SCMI Raw mode support exposes a userspace API which allows
+ * to send and receive SCMI commands, replies and notifications from a user
+ * application through injection and snooping of bare SCMI messages in binary
+ * little-endian format.
+ *
+ * Such injected SCMI transactions will then be routed through the SCMI core
+ * stack towards the SCMI backend server using whatever SCMI transport is
+ * currently configured on the system under test.
+ *
+ * It is meant to help in running any sort of SCMI backend server testing, no
+ * matter where the server is placed, as long as it is normally reachable via
+ * the transport configured on the system.
+ *
+ * It is activated by a Kernel configuration option since it is NOT meant to
+ * be used in production but only during development and in CI deployments.
+ *
+ * In order to avoid possible interferences between the SCMI Raw transactions
+ * originated from a test-suite and the normal operations of the SCMI drivers,
+ * when Raw mode is enabled, by default, all the regular SCMI drivers are
+ * inhibited, unless CONFIG_ARM_SCMI_RAW_MODE_SUPPORT_COEX is enabled: in this
+ * latter case the regular SCMI stack drivers will be loaded as usual and it is
+ * up to the user of this interface to take care of manually inhibiting the
+ * regular SCMI drivers in order to avoid interferences during the test runs.
+ *
+ * The exposed API is as follows.
+ *
+ * All SCMI Raw entries are rooted under a common top /raw debugfs top directory
+ * which in turn is rooted under the corresponding underlying SCMI instance.
+ *
+ * /sys/kernel/debug/scmi/
+ * `-- 0
+ * |-- atomic_threshold_us
+ * |-- instance_name
+ * |-- raw
+ * | |-- channels
+ * | | |-- 0x10
+ * | | | |-- message
+ * | | | `-- message_async
+ * | | `-- 0x13
+ * | | |-- message
+ * | | `-- message_async
+ * | |-- errors
+ * | |-- message
+ * | |-- message_async
+ * | |-- notification
+ * | `-- reset
+ * `-- transport
+ * |-- is_atomic
+ * |-- max_msg_size
+ * |-- max_rx_timeout_ms
+ * |-- rx_max_msg
+ * |-- tx_max_msg
+ * `-- type
+ *
+ * where:
+ *
+ * - errors: used to read back timed-out and unexpected replies
+ * - message*: used to send sync/async commands and read back immediate and
+ * delayed reponses (if any)
+ * - notification: used to read any notification being emitted by the system
+ * (if previously enabled by the user app)
+ * - reset: used to flush the queues of messages (of any kind) still pending
+ * to be read; this is useful at test-suite start/stop to get
+ * rid of any unread messages from the previous run.
+ *
+ * with the per-channel entries rooted at /channels being present only on a
+ * system where multiple transport channels have been configured.
+ *
+ * Such per-channel entries can be used to explicitly choose a specific channel
+ * for SCMI bare message injection, in contrast with the general entries above
+ * where, instead, the selection of the proper channel to use is automatically
+ * performed based the protocol embedded in the injected message and on how the
+ * transport is configured on the system.
+ *
+ * Note that other common general entries are available under transport/ to let
+ * the user applications properly make up their expectations in terms of
+ * timeouts and message characteristics.
+ *
+ * Each write to the message* entries causes one command request to be built
+ * and sent while the replies or delayed response are read back from those same
+ * entries one message at time (receiving an EOF at each message boundary).
+ *
+ * The user application running the test is in charge of handling timeouts
+ * on replies and properly choosing SCMI sequence numbers for the outgoing
+ * requests (using the same sequence number is supported but discouraged).
+ *
+ * Injection of multiple in-flight requests is supported as long as the user
+ * application uses properly distinct sequence numbers for concurrent requests
+ * and takes care to properly manage all the related issues about concurrency
+ * and command/reply pairing. Keep in mind that, anyway, the real level of
+ * parallelism attainable in such scenario is dependent on the characteristics
+ * of the underlying transport being used.
+ *
+ * Since the SCMI core regular stack is partially used to deliver and collect
+ * the messages, late replies arrived after timeouts and any other sort of
+ * unexpected message can be identified by the SCMI core as usual and they will
+ * be reported as messages under "errors" for later analysis.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/xarray.h>
+
+#include "common.h"
+
+#include "raw_mode.h"
+
+#include <trace/events/scmi.h>
+
+#define SCMI_XFER_RAW_MAX_RETRIES 10
+
+/**
+ * struct scmi_raw_queue - Generic Raw queue descriptor
+ *
+ * @free_bufs: A freelists listhead used to keep unused raw buffers
+ * @free_bufs_lock: Spinlock used to protect access to @free_bufs
+ * @msg_q: A listhead to a queue of snooped messages waiting to be read out
+ * @msg_q_lock: Spinlock used to protect access to @msg_q
+ * @wq: A waitqueue used to wait and poll on related @msg_q
+ */
+struct scmi_raw_queue {
+ struct list_head free_bufs;
+ /* Protect free_bufs[] lists */
+ spinlock_t free_bufs_lock;
+ struct list_head msg_q;
+ /* Protect msg_q[] lists */
+ spinlock_t msg_q_lock;
+ wait_queue_head_t wq;
+};
+
+/**
+ * struct scmi_raw_mode_info - Structure holding SCMI Raw instance data
+ *
+ * @id: Sequential Raw instance ID.
+ * @handle: Pointer to SCMI entity handle to use
+ * @desc: Pointer to the transport descriptor to use
+ * @tx_max_msg: Maximum number of concurrent TX in-flight messages
+ * @q: An array of Raw queue descriptors
+ * @chans_q: An XArray mapping optional additional per-channel queues
+ * @free_waiters: Head of freelist for unused waiters
+ * @free_mtx: A mutex to protect the waiters freelist
+ * @active_waiters: Head of list for currently active and used waiters
+ * @active_mtx: A mutex to protect the active waiters list
+ * @waiters_work: A work descriptor to be used with the workqueue machinery
+ * @wait_wq: A workqueue reference to the created workqueue
+ * @dentry: Top debugfs root dentry for SCMI Raw
+ * @gid: A group ID used for devres accounting
+ *
+ * Note that this descriptor is passed back to the core after SCMI Raw is
+ * initialized as an opaque handle to use by subsequent SCMI Raw call hooks.
+ *
+ */
+struct scmi_raw_mode_info {
+ unsigned int id;
+ const struct scmi_handle *handle;
+ const struct scmi_desc *desc;
+ int tx_max_msg;
+ struct scmi_raw_queue *q[SCMI_RAW_MAX_QUEUE];
+ struct xarray chans_q;
+ struct list_head free_waiters;
+ /* Protect free_waiters list */
+ struct mutex free_mtx;
+ struct list_head active_waiters;
+ /* Protect active_waiters list */
+ struct mutex active_mtx;
+ struct work_struct waiters_work;
+ struct workqueue_struct *wait_wq;
+ struct dentry *dentry;
+ void *gid;
+};
+
+/**
+ * struct scmi_xfer_raw_waiter - Structure to describe an xfer to be waited for
+ *
+ * @start_jiffies: The timestamp in jiffies of when this structure was queued.
+ * @cinfo: A reference to the channel to use for this transaction
+ * @xfer: A reference to the xfer to be waited for
+ * @async_response: A completion to be, optionally, used for async waits: it
+ * will be setup by @scmi_do_xfer_raw_start, if needed, to be
+ * pointed at by xfer->async_done.
+ * @node: A list node.
+ */
+struct scmi_xfer_raw_waiter {
+ unsigned long start_jiffies;
+ struct scmi_chan_info *cinfo;
+ struct scmi_xfer *xfer;
+ struct completion async_response;
+ struct list_head node;
+};
+
+/**
+ * struct scmi_raw_buffer - Structure to hold a full SCMI message
+ *
+ * @max_len: The maximum allowed message size (header included) that can be
+ * stored into @msg
+ * @msg: A message buffer used to collect a full message grabbed from an xfer.
+ * @node: A list node.
+ */
+struct scmi_raw_buffer {
+ size_t max_len;
+ struct scmi_msg msg;
+ struct list_head node;
+};
+
+/**
+ * struct scmi_dbg_raw_data - Structure holding data needed by the debugfs
+ * layer
+ *
+ * @chan_id: The preferred channel to use: if zero the channel is automatically
+ * selected based on protocol.
+ * @raw: A reference to the Raw instance.
+ * @tx: A message buffer used to collect TX message on write.
+ * @tx_size: The effective size of the TX message.
+ * @tx_req_size: The final expected size of the complete TX message.
+ * @rx: A message buffer to collect RX message on read.
+ * @rx_size: The effective size of the RX message.
+ */
+struct scmi_dbg_raw_data {
+ u8 chan_id;
+ struct scmi_raw_mode_info *raw;
+ struct scmi_msg tx;
+ size_t tx_size;
+ size_t tx_req_size;
+ struct scmi_msg rx;
+ size_t rx_size;
+};
+
+static struct scmi_raw_queue *
+scmi_raw_queue_select(struct scmi_raw_mode_info *raw, unsigned int idx,
+ unsigned int chan_id)
+{
+ if (!chan_id)
+ return raw->q[idx];
+
+ return xa_load(&raw->chans_q, chan_id);
+}
+
+static struct scmi_raw_buffer *scmi_raw_buffer_get(struct scmi_raw_queue *q)
+{
+ unsigned long flags;
+ struct scmi_raw_buffer *rb = NULL;
+ struct list_head *head = &q->free_bufs;
+
+ spin_lock_irqsave(&q->free_bufs_lock, flags);
+ if (!list_empty(head)) {
+ rb = list_first_entry(head, struct scmi_raw_buffer, node);
+ list_del_init(&rb->node);
+ }
+ spin_unlock_irqrestore(&q->free_bufs_lock, flags);
+
+ return rb;
+}
+
+static void scmi_raw_buffer_put(struct scmi_raw_queue *q,
+ struct scmi_raw_buffer *rb)
+{
+ unsigned long flags;
+
+ /* Reset to full buffer length */
+ rb->msg.len = rb->max_len;
+
+ spin_lock_irqsave(&q->free_bufs_lock, flags);
+ list_add_tail(&rb->node, &q->free_bufs);
+ spin_unlock_irqrestore(&q->free_bufs_lock, flags);
+}
+
+static void scmi_raw_buffer_enqueue(struct scmi_raw_queue *q,
+ struct scmi_raw_buffer *rb)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&q->msg_q_lock, flags);
+ list_add_tail(&rb->node, &q->msg_q);
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+
+ wake_up_interruptible(&q->wq);
+}
+
+static struct scmi_raw_buffer*
+scmi_raw_buffer_dequeue_unlocked(struct scmi_raw_queue *q)
+{
+ struct scmi_raw_buffer *rb = NULL;
+
+ if (!list_empty(&q->msg_q)) {
+ rb = list_first_entry(&q->msg_q, struct scmi_raw_buffer, node);
+ list_del_init(&rb->node);
+ }
+
+ return rb;
+}
+
+static struct scmi_raw_buffer *scmi_raw_buffer_dequeue(struct scmi_raw_queue *q)
+{
+ unsigned long flags;
+ struct scmi_raw_buffer *rb;
+
+ spin_lock_irqsave(&q->msg_q_lock, flags);
+ rb = scmi_raw_buffer_dequeue_unlocked(q);
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+
+ return rb;
+}
+
+static void scmi_raw_buffer_queue_flush(struct scmi_raw_queue *q)
+{
+ struct scmi_raw_buffer *rb;
+
+ do {
+ rb = scmi_raw_buffer_dequeue(q);
+ if (rb)
+ scmi_raw_buffer_put(q, rb);
+ } while (rb);
+}
+
+static struct scmi_xfer_raw_waiter *
+scmi_xfer_raw_waiter_get(struct scmi_raw_mode_info *raw, struct scmi_xfer *xfer,
+ struct scmi_chan_info *cinfo, bool async)
+{
+ struct scmi_xfer_raw_waiter *rw = NULL;
+
+ mutex_lock(&raw->free_mtx);
+ if (!list_empty(&raw->free_waiters)) {
+ rw = list_first_entry(&raw->free_waiters,
+ struct scmi_xfer_raw_waiter, node);
+ list_del_init(&rw->node);
+
+ if (async) {
+ reinit_completion(&rw->async_response);
+ xfer->async_done = &rw->async_response;
+ }
+
+ rw->cinfo = cinfo;
+ rw->xfer = xfer;
+ }
+ mutex_unlock(&raw->free_mtx);
+
+ return rw;
+}
+
+static void scmi_xfer_raw_waiter_put(struct scmi_raw_mode_info *raw,
+ struct scmi_xfer_raw_waiter *rw)
+{
+ if (rw->xfer) {
+ rw->xfer->async_done = NULL;
+ rw->xfer = NULL;
+ }
+
+ mutex_lock(&raw->free_mtx);
+ list_add_tail(&rw->node, &raw->free_waiters);
+ mutex_unlock(&raw->free_mtx);
+}
+
+static void scmi_xfer_raw_waiter_enqueue(struct scmi_raw_mode_info *raw,
+ struct scmi_xfer_raw_waiter *rw)
+{
+ /* A timestamp for the deferred worker to know how much this has aged */
+ rw->start_jiffies = jiffies;
+
+ trace_scmi_xfer_response_wait(rw->xfer->transfer_id, rw->xfer->hdr.id,
+ rw->xfer->hdr.protocol_id,
+ rw->xfer->hdr.seq,
+ raw->desc->max_rx_timeout_ms,
+ rw->xfer->hdr.poll_completion);
+
+ mutex_lock(&raw->active_mtx);
+ list_add_tail(&rw->node, &raw->active_waiters);
+ mutex_unlock(&raw->active_mtx);
+
+ /* kick waiter work */
+ queue_work(raw->wait_wq, &raw->waiters_work);
+}
+
+static struct scmi_xfer_raw_waiter *
+scmi_xfer_raw_waiter_dequeue(struct scmi_raw_mode_info *raw)
+{
+ struct scmi_xfer_raw_waiter *rw = NULL;
+
+ mutex_lock(&raw->active_mtx);
+ if (!list_empty(&raw->active_waiters)) {
+ rw = list_first_entry(&raw->active_waiters,
+ struct scmi_xfer_raw_waiter, node);
+ list_del_init(&rw->node);
+ }
+ mutex_unlock(&raw->active_mtx);
+
+ return rw;
+}
+
+/**
+ * scmi_xfer_raw_worker - Work function to wait for Raw xfers completions
+ *
+ * @work: A reference to the work.
+ *
+ * In SCMI Raw mode, once a user-provided injected SCMI message is sent, we
+ * cannot wait to receive its response (if any) in the context of the injection
+ * routines so as not to leave the userspace write syscall, which delivered the
+ * SCMI message to send, pending till eventually a reply is received.
+ * Userspace should and will poll/wait instead on the read syscalls which will
+ * be in charge of reading a received reply (if any).
+ *
+ * Even though reply messages are collected and reported into the SCMI Raw layer
+ * on the RX path, nonetheless we have to properly wait for their completion as
+ * usual (and async_completion too if needed) in order to properly release the
+ * xfer structure at the end: to do this out of the context of the write/send
+ * these waiting jobs are delegated to this deferred worker.
+ *
+ * Any sent xfer, to be waited for, is timestamped and queued for later
+ * consumption by this worker: queue aging is accounted for while choosing a
+ * timeout for the completion, BUT we do not really care here if we end up
+ * accidentally waiting for a bit too long.
+ */
+static void scmi_xfer_raw_worker(struct work_struct *work)
+{
+ struct scmi_raw_mode_info *raw;
+ struct device *dev;
+ unsigned long max_tmo;
+
+ raw = container_of(work, struct scmi_raw_mode_info, waiters_work);
+ dev = raw->handle->dev;
+ max_tmo = msecs_to_jiffies(raw->desc->max_rx_timeout_ms);
+
+ do {
+ int ret = 0;
+ unsigned int timeout_ms;
+ unsigned long aging;
+ struct scmi_xfer *xfer;
+ struct scmi_xfer_raw_waiter *rw;
+ struct scmi_chan_info *cinfo;
+
+ rw = scmi_xfer_raw_waiter_dequeue(raw);
+ if (!rw)
+ return;
+
+ cinfo = rw->cinfo;
+ xfer = rw->xfer;
+ /*
+ * Waiters are queued by wait-deadline at the end, so some of
+ * them could have been already expired when processed, BUT we
+ * have to check the completion status anyway just in case a
+ * virtually expired (aged) transaction was indeed completed
+ * fine and we'll have to wait for the asynchronous part (if
+ * any): for this reason a 1 ms timeout is used for already
+ * expired/aged xfers.
+ */
+ aging = jiffies - rw->start_jiffies;
+ timeout_ms = max_tmo > aging ?
+ jiffies_to_msecs(max_tmo - aging) : 1;
+
+ ret = scmi_xfer_raw_wait_for_message_response(cinfo, xfer,
+ timeout_ms);
+ if (!ret && xfer->hdr.status)
+ ret = scmi_to_linux_errno(xfer->hdr.status);
+
+ if (raw->desc->ops->mark_txdone)
+ raw->desc->ops->mark_txdone(rw->cinfo, ret, xfer);
+
+ trace_scmi_xfer_end(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq, ret);
+
+ /* Wait also for an async delayed response if needed */
+ if (!ret && xfer->async_done) {
+ unsigned long tmo = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT);
+
+ if (!wait_for_completion_timeout(xfer->async_done, tmo))
+ dev_err(dev,
+ "timed out in RAW delayed resp - HDR:%08X\n",
+ pack_scmi_header(&xfer->hdr));
+ }
+
+ /* Release waiter and xfer */
+ scmi_xfer_raw_put(raw->handle, xfer);
+ scmi_xfer_raw_waiter_put(raw, rw);
+ } while (1);
+}
+
+static void scmi_xfer_raw_reset(struct scmi_raw_mode_info *raw)
+{
+ int i;
+
+ dev_info(raw->handle->dev, "Resetting SCMI Raw stack.\n");
+
+ for (i = 0; i < SCMI_RAW_MAX_QUEUE; i++)
+ scmi_raw_buffer_queue_flush(raw->q[i]);
+}
+
+/**
+ * scmi_xfer_raw_get_init - An helper to build a valid xfer from the provided
+ * bare SCMI message.
+ *
+ * @raw: A reference to the Raw instance.
+ * @buf: A buffer containing the whole SCMI message to send (including the
+ * header) in little-endian binary formmat.
+ * @len: Length of the message in @buf.
+ * @p: A pointer to return the initialized Raw xfer.
+ *
+ * After an xfer is picked from the TX pool and filled in with the message
+ * content, the xfer is registered as pending with the core in the usual way
+ * using the original sequence number provided by the user with the message.
+ *
+ * Note that, in case the testing user application is NOT using distinct
+ * sequence-numbers between successive SCMI messages such registration could
+ * fail temporarily if the previous message, using the same sequence number,
+ * had still not released; in such a case we just wait and retry.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_xfer_raw_get_init(struct scmi_raw_mode_info *raw, void *buf,
+ size_t len, struct scmi_xfer **p)
+{
+ u32 msg_hdr;
+ size_t tx_size;
+ struct scmi_xfer *xfer;
+ int ret, retry = SCMI_XFER_RAW_MAX_RETRIES;
+ struct device *dev = raw->handle->dev;
+
+ if (!buf || len < sizeof(u32))
+ return -EINVAL;
+
+ tx_size = len - sizeof(u32);
+ /* Ensure we have sane transfer sizes */
+ if (tx_size > raw->desc->max_msg_size)
+ return -ERANGE;
+
+ xfer = scmi_xfer_raw_get(raw->handle);
+ if (IS_ERR(xfer)) {
+ dev_warn(dev, "RAW - Cannot get a free RAW xfer !\n");
+ return PTR_ERR(xfer);
+ }
+
+ /* Build xfer from the provided SCMI bare LE message */
+ msg_hdr = le32_to_cpu(*((__le32 *)buf));
+ unpack_scmi_header(msg_hdr, &xfer->hdr);
+ xfer->hdr.seq = (u16)MSG_XTRACT_TOKEN(msg_hdr);
+ /* Polling not supported */
+ xfer->hdr.poll_completion = false;
+ xfer->hdr.status = SCMI_SUCCESS;
+ xfer->tx.len = tx_size;
+ xfer->rx.len = raw->desc->max_msg_size;
+ /* Clear the whole TX buffer */
+ memset(xfer->tx.buf, 0x00, raw->desc->max_msg_size);
+ if (xfer->tx.len)
+ memcpy(xfer->tx.buf, (u8 *)buf + sizeof(msg_hdr), xfer->tx.len);
+ *p = xfer;
+
+ /*
+ * In flight registration can temporarily fail in case of Raw messages
+ * if the user injects messages without using monotonically increasing
+ * sequence numbers since, in Raw mode, the xfer (and the token) is
+ * finally released later by a deferred worker. Just retry for a while.
+ */
+ do {
+ ret = scmi_xfer_raw_inflight_register(raw->handle, xfer);
+ if (ret) {
+ dev_dbg(dev,
+ "...retrying[%d] inflight registration\n",
+ retry);
+ msleep(raw->desc->max_rx_timeout_ms /
+ SCMI_XFER_RAW_MAX_RETRIES);
+ }
+ } while (ret && --retry);
+
+ if (ret) {
+ dev_warn(dev,
+ "RAW - Could NOT register xfer %d in-flight HDR:0x%08X\n",
+ xfer->hdr.seq, msg_hdr);
+ scmi_xfer_raw_put(raw->handle, xfer);
+ }
+
+ return ret;
+}
+
+/**
+ * scmi_do_xfer_raw_start - An helper to send a valid raw xfer
+ *
+ * @raw: A reference to the Raw instance.
+ * @xfer: The xfer to send
+ * @chan_id: The channel ID to use, if zero the channels is automatically
+ * selected based on the protocol used.
+ * @async: A flag stating if an asynchronous command is required.
+ *
+ * This function send a previously built raw xfer using an appropriate channel
+ * and queues the related waiting work.
+ *
+ * Note that we need to know explicitly if the required command is meant to be
+ * asynchronous in kind since we have to properly setup the waiter.
+ * (and deducing this from the payload is weak and do not scale given there is
+ * NOT a common header-flag stating if the command is asynchronous or not)
+ *
+ * Return: 0 on Success
+ */
+static int scmi_do_xfer_raw_start(struct scmi_raw_mode_info *raw,
+ struct scmi_xfer *xfer, u8 chan_id,
+ bool async)
+{
+ int ret;
+ struct scmi_chan_info *cinfo;
+ struct scmi_xfer_raw_waiter *rw;
+ struct device *dev = raw->handle->dev;
+
+ if (!chan_id)
+ chan_id = xfer->hdr.protocol_id;
+ else
+ xfer->flags |= SCMI_XFER_FLAG_CHAN_SET;
+
+ cinfo = scmi_xfer_raw_channel_get(raw->handle, chan_id);
+ if (IS_ERR(cinfo))
+ return PTR_ERR(cinfo);
+
+ rw = scmi_xfer_raw_waiter_get(raw, xfer, cinfo, async);
+ if (!rw) {
+ dev_warn(dev, "RAW - Cannot get a free waiter !\n");
+ return -ENOMEM;
+ }
+
+ /* True ONLY if also supported by transport. */
+ if (is_polling_enabled(cinfo, raw->desc))
+ xfer->hdr.poll_completion = true;
+
+ reinit_completion(&xfer->done);
+ /* Make sure xfer state update is visible before sending */
+ smp_store_mb(xfer->state, SCMI_XFER_SENT_OK);
+
+ trace_scmi_xfer_begin(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq,
+ xfer->hdr.poll_completion);
+
+ ret = raw->desc->ops->send_message(rw->cinfo, xfer);
+ if (ret) {
+ dev_err(dev, "Failed to send RAW message %d\n", ret);
+ scmi_xfer_raw_waiter_put(raw, rw);
+ return ret;
+ }
+
+ trace_scmi_msg_dump(raw->id, cinfo->id, xfer->hdr.protocol_id,
+ xfer->hdr.id, "cmnd", xfer->hdr.seq,
+ xfer->hdr.status,
+ xfer->tx.buf, xfer->tx.len);
+
+ scmi_xfer_raw_waiter_enqueue(raw, rw);
+
+ return ret;
+}
+
+/**
+ * scmi_raw_message_send - An helper to build and send an SCMI command using
+ * the provided SCMI bare message buffer
+ *
+ * @raw: A reference to the Raw instance.
+ * @buf: A buffer containing the whole SCMI message to send (including the
+ * header) in little-endian binary format.
+ * @len: Length of the message in @buf.
+ * @chan_id: The channel ID to use.
+ * @async: A flag stating if an asynchronous command is required.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_raw_message_send(struct scmi_raw_mode_info *raw,
+ void *buf, size_t len, u8 chan_id, bool async)
+{
+ int ret;
+ struct scmi_xfer *xfer;
+
+ ret = scmi_xfer_raw_get_init(raw, buf, len, &xfer);
+ if (ret)
+ return ret;
+
+ ret = scmi_do_xfer_raw_start(raw, xfer, chan_id, async);
+ if (ret)
+ scmi_xfer_raw_put(raw->handle, xfer);
+
+ return ret;
+}
+
+static struct scmi_raw_buffer *
+scmi_raw_message_dequeue(struct scmi_raw_queue *q, bool o_nonblock)
+{
+ unsigned long flags;
+ struct scmi_raw_buffer *rb;
+
+ spin_lock_irqsave(&q->msg_q_lock, flags);
+ while (list_empty(&q->msg_q)) {
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+
+ if (o_nonblock)
+ return ERR_PTR(-EAGAIN);
+
+ if (wait_event_interruptible(q->wq, !list_empty(&q->msg_q)))
+ return ERR_PTR(-ERESTARTSYS);
+
+ spin_lock_irqsave(&q->msg_q_lock, flags);
+ }
+
+ rb = scmi_raw_buffer_dequeue_unlocked(q);
+
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+
+ return rb;
+}
+
+/**
+ * scmi_raw_message_receive - An helper to dequeue and report the next
+ * available enqueued raw message payload that has been collected.
+ *
+ * @raw: A reference to the Raw instance.
+ * @buf: A buffer to get hold of the whole SCMI message received and represented
+ * in little-endian binary format.
+ * @len: Length of @buf.
+ * @size: The effective size of the message copied into @buf
+ * @idx: The index of the queue to pick the next queued message from.
+ * @chan_id: The channel ID to use.
+ * @o_nonblock: A flag to request a non-blocking message dequeue.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_raw_message_receive(struct scmi_raw_mode_info *raw,
+ void *buf, size_t len, size_t *size,
+ unsigned int idx, unsigned int chan_id,
+ bool o_nonblock)
+{
+ int ret = 0;
+ struct scmi_raw_buffer *rb;
+ struct scmi_raw_queue *q;
+
+ q = scmi_raw_queue_select(raw, idx, chan_id);
+ if (!q)
+ return -ENODEV;
+
+ rb = scmi_raw_message_dequeue(q, o_nonblock);
+ if (IS_ERR(rb)) {
+ dev_dbg(raw->handle->dev, "RAW - No message available!\n");
+ return PTR_ERR(rb);
+ }
+
+ if (rb->msg.len <= len) {
+ memcpy(buf, rb->msg.buf, rb->msg.len);
+ *size = rb->msg.len;
+ } else {
+ ret = -ENOSPC;
+ }
+
+ scmi_raw_buffer_put(q, rb);
+
+ return ret;
+}
+
+/* SCMI Raw debugfs helpers */
+
+static ssize_t scmi_dbg_raw_mode_common_read(struct file *filp,
+ char __user *buf,
+ size_t count, loff_t *ppos,
+ unsigned int idx)
+{
+ ssize_t cnt;
+ struct scmi_dbg_raw_data *rd = filp->private_data;
+
+ if (!rd->rx_size) {
+ int ret;
+
+ ret = scmi_raw_message_receive(rd->raw, rd->rx.buf, rd->rx.len,
+ &rd->rx_size, idx, rd->chan_id,
+ filp->f_flags & O_NONBLOCK);
+ if (ret) {
+ rd->rx_size = 0;
+ return ret;
+ }
+
+ /* Reset any previous filepos change, including writes */
+ *ppos = 0;
+ } else if (*ppos == rd->rx_size) {
+ /* Return EOF once all the message has been read-out */
+ rd->rx_size = 0;
+ return 0;
+ }
+
+ cnt = simple_read_from_buffer(buf, count, ppos,
+ rd->rx.buf, rd->rx_size);
+
+ return cnt;
+}
+
+static ssize_t scmi_dbg_raw_mode_common_write(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos,
+ bool async)
+{
+ int ret;
+ struct scmi_dbg_raw_data *rd = filp->private_data;
+
+ if (count > rd->tx.len - rd->tx_size)
+ return -ENOSPC;
+
+ /* On first write attempt @count carries the total full message size. */
+ if (!rd->tx_size)
+ rd->tx_req_size = count;
+
+ /*
+ * Gather a full message, possibly across multiple interrupted wrrtes,
+ * before sending it with a single RAW xfer.
+ */
+ if (rd->tx_size < rd->tx_req_size) {
+ size_t cnt;
+
+ cnt = simple_write_to_buffer(rd->tx.buf, rd->tx.len, ppos,
+ buf, count);
+ rd->tx_size += cnt;
+ if (cnt < count)
+ return cnt;
+ }
+
+ ret = scmi_raw_message_send(rd->raw, rd->tx.buf, rd->tx_size,
+ rd->chan_id, async);
+
+ /* Reset ppos for next message ... */
+ rd->tx_size = 0;
+ *ppos = 0;
+
+ return ret ?: count;
+}
+
+static __poll_t scmi_test_dbg_raw_common_poll(struct file *filp,
+ struct poll_table_struct *wait,
+ unsigned int idx)
+{
+ unsigned long flags;
+ struct scmi_dbg_raw_data *rd = filp->private_data;
+ struct scmi_raw_queue *q;
+ __poll_t mask = 0;
+
+ q = scmi_raw_queue_select(rd->raw, idx, rd->chan_id);
+ if (!q)
+ return mask;
+
+ poll_wait(filp, &q->wq, wait);
+
+ spin_lock_irqsave(&q->msg_q_lock, flags);
+ if (!list_empty(&q->msg_q))
+ mask = EPOLLIN | EPOLLRDNORM;
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+
+ return mask;
+}
+
+static ssize_t scmi_dbg_raw_mode_message_read(struct file *filp,
+ char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return scmi_dbg_raw_mode_common_read(filp, buf, count, ppos,
+ SCMI_RAW_REPLY_QUEUE);
+}
+
+static ssize_t scmi_dbg_raw_mode_message_write(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return scmi_dbg_raw_mode_common_write(filp, buf, count, ppos, false);
+}
+
+static __poll_t scmi_dbg_raw_mode_message_poll(struct file *filp,
+ struct poll_table_struct *wait)
+{
+ return scmi_test_dbg_raw_common_poll(filp, wait, SCMI_RAW_REPLY_QUEUE);
+}
+
+static int scmi_dbg_raw_mode_open(struct inode *inode, struct file *filp)
+{
+ u8 id;
+ struct scmi_raw_mode_info *raw;
+ struct scmi_dbg_raw_data *rd;
+ const char *id_str = filp->f_path.dentry->d_parent->d_name.name;
+
+ if (!inode->i_private)
+ return -ENODEV;
+
+ raw = inode->i_private;
+ rd = kzalloc(sizeof(*rd), GFP_KERNEL);
+ if (!rd)
+ return -ENOMEM;
+
+ rd->rx.len = raw->desc->max_msg_size + sizeof(u32);
+ rd->rx.buf = kzalloc(rd->rx.len, GFP_KERNEL);
+ if (!rd->rx.buf) {
+ kfree(rd);
+ return -ENOMEM;
+ }
+
+ rd->tx.len = raw->desc->max_msg_size + sizeof(u32);
+ rd->tx.buf = kzalloc(rd->tx.len, GFP_KERNEL);
+ if (!rd->tx.buf) {
+ kfree(rd->rx.buf);
+ kfree(rd);
+ return -ENOMEM;
+ }
+
+ /* Grab channel ID from debugfs entry naming if any */
+ if (!kstrtou8(id_str, 16, &id))
+ rd->chan_id = id;
+
+ rd->raw = raw;
+ filp->private_data = rd;
+
+ return 0;
+}
+
+static int scmi_dbg_raw_mode_release(struct inode *inode, struct file *filp)
+{
+ struct scmi_dbg_raw_data *rd = filp->private_data;
+
+ kfree(rd->rx.buf);
+ kfree(rd->tx.buf);
+ kfree(rd);
+
+ return 0;
+}
+
+static ssize_t scmi_dbg_raw_mode_reset_write(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct scmi_dbg_raw_data *rd = filp->private_data;
+
+ scmi_xfer_raw_reset(rd->raw);
+
+ return count;
+}
+
+static const struct file_operations scmi_dbg_raw_mode_reset_fops = {
+ .open = scmi_dbg_raw_mode_open,
+ .release = scmi_dbg_raw_mode_release,
+ .write = scmi_dbg_raw_mode_reset_write,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations scmi_dbg_raw_mode_message_fops = {
+ .open = scmi_dbg_raw_mode_open,
+ .release = scmi_dbg_raw_mode_release,
+ .read = scmi_dbg_raw_mode_message_read,
+ .write = scmi_dbg_raw_mode_message_write,
+ .poll = scmi_dbg_raw_mode_message_poll,
+ .owner = THIS_MODULE,
+};
+
+static ssize_t scmi_dbg_raw_mode_message_async_write(struct file *filp,
+ const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return scmi_dbg_raw_mode_common_write(filp, buf, count, ppos, true);
+}
+
+static const struct file_operations scmi_dbg_raw_mode_message_async_fops = {
+ .open = scmi_dbg_raw_mode_open,
+ .release = scmi_dbg_raw_mode_release,
+ .read = scmi_dbg_raw_mode_message_read,
+ .write = scmi_dbg_raw_mode_message_async_write,
+ .poll = scmi_dbg_raw_mode_message_poll,
+ .owner = THIS_MODULE,
+};
+
+static ssize_t scmi_test_dbg_raw_mode_notif_read(struct file *filp,
+ char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return scmi_dbg_raw_mode_common_read(filp, buf, count, ppos,
+ SCMI_RAW_NOTIF_QUEUE);
+}
+
+static __poll_t
+scmi_test_dbg_raw_mode_notif_poll(struct file *filp,
+ struct poll_table_struct *wait)
+{
+ return scmi_test_dbg_raw_common_poll(filp, wait, SCMI_RAW_NOTIF_QUEUE);
+}
+
+static const struct file_operations scmi_dbg_raw_mode_notification_fops = {
+ .open = scmi_dbg_raw_mode_open,
+ .release = scmi_dbg_raw_mode_release,
+ .read = scmi_test_dbg_raw_mode_notif_read,
+ .poll = scmi_test_dbg_raw_mode_notif_poll,
+ .owner = THIS_MODULE,
+};
+
+static ssize_t scmi_test_dbg_raw_mode_errors_read(struct file *filp,
+ char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return scmi_dbg_raw_mode_common_read(filp, buf, count, ppos,
+ SCMI_RAW_ERRS_QUEUE);
+}
+
+static __poll_t
+scmi_test_dbg_raw_mode_errors_poll(struct file *filp,
+ struct poll_table_struct *wait)
+{
+ return scmi_test_dbg_raw_common_poll(filp, wait, SCMI_RAW_ERRS_QUEUE);
+}
+
+static const struct file_operations scmi_dbg_raw_mode_errors_fops = {
+ .open = scmi_dbg_raw_mode_open,
+ .release = scmi_dbg_raw_mode_release,
+ .read = scmi_test_dbg_raw_mode_errors_read,
+ .poll = scmi_test_dbg_raw_mode_errors_poll,
+ .owner = THIS_MODULE,
+};
+
+static struct scmi_raw_queue *
+scmi_raw_queue_init(struct scmi_raw_mode_info *raw)
+{
+ int i;
+ struct scmi_raw_buffer *rb;
+ struct device *dev = raw->handle->dev;
+ struct scmi_raw_queue *q;
+
+ q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL);
+ if (!q)
+ return ERR_PTR(-ENOMEM);
+
+ rb = devm_kcalloc(dev, raw->tx_max_msg, sizeof(*rb), GFP_KERNEL);
+ if (!rb)
+ return ERR_PTR(-ENOMEM);
+
+ spin_lock_init(&q->free_bufs_lock);
+ INIT_LIST_HEAD(&q->free_bufs);
+ for (i = 0; i < raw->tx_max_msg; i++, rb++) {
+ rb->max_len = raw->desc->max_msg_size + sizeof(u32);
+ rb->msg.buf = devm_kzalloc(dev, rb->max_len, GFP_KERNEL);
+ if (!rb->msg.buf)
+ return ERR_PTR(-ENOMEM);
+ scmi_raw_buffer_put(q, rb);
+ }
+
+ spin_lock_init(&q->msg_q_lock);
+ INIT_LIST_HEAD(&q->msg_q);
+ init_waitqueue_head(&q->wq);
+
+ return q;
+}
+
+static int scmi_xfer_raw_worker_init(struct scmi_raw_mode_info *raw)
+{
+ int i;
+ struct scmi_xfer_raw_waiter *rw;
+ struct device *dev = raw->handle->dev;
+
+ rw = devm_kcalloc(dev, raw->tx_max_msg, sizeof(*rw), GFP_KERNEL);
+ if (!rw)
+ return -ENOMEM;
+
+ raw->wait_wq = alloc_workqueue("scmi-raw-wait-wq-%d",
+ WQ_UNBOUND | WQ_FREEZABLE |
+ WQ_HIGHPRI, WQ_SYSFS, raw->id);
+ if (!raw->wait_wq)
+ return -ENOMEM;
+
+ mutex_init(&raw->free_mtx);
+ INIT_LIST_HEAD(&raw->free_waiters);
+ mutex_init(&raw->active_mtx);
+ INIT_LIST_HEAD(&raw->active_waiters);
+
+ for (i = 0; i < raw->tx_max_msg; i++, rw++) {
+ init_completion(&rw->async_response);
+ scmi_xfer_raw_waiter_put(raw, rw);
+ }
+ INIT_WORK(&raw->waiters_work, scmi_xfer_raw_worker);
+
+ return 0;
+}
+
+static int scmi_raw_mode_setup(struct scmi_raw_mode_info *raw,
+ u8 *channels, int num_chans)
+{
+ int ret, idx;
+ void *gid;
+ struct device *dev = raw->handle->dev;
+
+ gid = devres_open_group(dev, NULL, GFP_KERNEL);
+ if (!gid)
+ return -ENOMEM;
+
+ for (idx = 0; idx < SCMI_RAW_MAX_QUEUE; idx++) {
+ raw->q[idx] = scmi_raw_queue_init(raw);
+ if (IS_ERR(raw->q[idx])) {
+ ret = PTR_ERR(raw->q[idx]);
+ goto err;
+ }
+ }
+
+ xa_init(&raw->chans_q);
+ if (num_chans > 1) {
+ int i;
+
+ for (i = 0; i < num_chans; i++) {
+ void *xret;
+ struct scmi_raw_queue *q;
+
+ q = scmi_raw_queue_init(raw);
+ if (IS_ERR(q)) {
+ ret = PTR_ERR(q);
+ goto err_xa;
+ }
+
+ xret = xa_store(&raw->chans_q, channels[i], q,
+ GFP_KERNEL);
+ if (xa_err(xret)) {
+ dev_err(dev,
+ "Fail to allocate Raw queue 0x%02X\n",
+ channels[i]);
+ ret = xa_err(xret);
+ goto err_xa;
+ }
+ }
+ }
+
+ ret = scmi_xfer_raw_worker_init(raw);
+ if (ret)
+ goto err_xa;
+
+ devres_close_group(dev, gid);
+ raw->gid = gid;
+
+ return 0;
+
+err_xa:
+ xa_destroy(&raw->chans_q);
+err:
+ devres_release_group(dev, gid);
+ return ret;
+}
+
+/**
+ * scmi_raw_mode_init - Function to initialize the SCMI Raw stack
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @top_dentry: A reference to the top Raw debugfs dentry
+ * @instance_id: The ID of the underlying SCMI platform instance represented by
+ * this Raw instance
+ * @channels: The list of the existing channels
+ * @num_chans: The number of entries in @channels
+ * @desc: Reference to the transport operations
+ * @tx_max_msg: Max number of in-flight messages allowed by the transport
+ *
+ * This function prepare the SCMI Raw stack and creates the debugfs API.
+ *
+ * Return: An opaque handle to the Raw instance on Success, an ERR_PTR otherwise
+ */
+void *scmi_raw_mode_init(const struct scmi_handle *handle,
+ struct dentry *top_dentry, int instance_id,
+ u8 *channels, int num_chans,
+ const struct scmi_desc *desc, int tx_max_msg)
+{
+ int ret;
+ struct scmi_raw_mode_info *raw;
+ struct device *dev;
+
+ if (!handle || !desc)
+ return ERR_PTR(-EINVAL);
+
+ dev = handle->dev;
+ raw = devm_kzalloc(dev, sizeof(*raw), GFP_KERNEL);
+ if (!raw)
+ return ERR_PTR(-ENOMEM);
+
+ raw->handle = handle;
+ raw->desc = desc;
+ raw->tx_max_msg = tx_max_msg;
+ raw->id = instance_id;
+
+ ret = scmi_raw_mode_setup(raw, channels, num_chans);
+ if (ret) {
+ devm_kfree(dev, raw);
+ return ERR_PTR(ret);
+ }
+
+ raw->dentry = debugfs_create_dir("raw", top_dentry);
+
+ debugfs_create_file("reset", 0200, raw->dentry, raw,
+ &scmi_dbg_raw_mode_reset_fops);
+
+ debugfs_create_file("message", 0600, raw->dentry, raw,
+ &scmi_dbg_raw_mode_message_fops);
+
+ debugfs_create_file("message_async", 0600, raw->dentry, raw,
+ &scmi_dbg_raw_mode_message_async_fops);
+
+ debugfs_create_file("notification", 0400, raw->dentry, raw,
+ &scmi_dbg_raw_mode_notification_fops);
+
+ debugfs_create_file("errors", 0400, raw->dentry, raw,
+ &scmi_dbg_raw_mode_errors_fops);
+
+ /*
+ * Expose per-channel entries if multiple channels available.
+ * Just ignore errors while setting up these interfaces since we
+ * have anyway already a working core Raw support.
+ */
+ if (num_chans > 1) {
+ int i;
+ struct dentry *top_chans;
+
+ top_chans = debugfs_create_dir("channels", raw->dentry);
+
+ for (i = 0; i < num_chans; i++) {
+ char cdir[8];
+ struct dentry *chd;
+
+ snprintf(cdir, 8, "0x%02X", channels[i]);
+ chd = debugfs_create_dir(cdir, top_chans);
+
+ debugfs_create_file("message", 0600, chd, raw,
+ &scmi_dbg_raw_mode_message_fops);
+
+ debugfs_create_file("message_async", 0600, chd, raw,
+ &scmi_dbg_raw_mode_message_async_fops);
+ }
+ }
+
+ dev_info(dev, "SCMI RAW Mode initialized for instance %d\n", raw->id);
+
+ return raw;
+}
+
+/**
+ * scmi_raw_mode_cleanup - Function to cleanup the SCMI Raw stack
+ *
+ * @r: An opaque handle to an initialized SCMI Raw instance
+ */
+void scmi_raw_mode_cleanup(void *r)
+{
+ struct scmi_raw_mode_info *raw = r;
+
+ if (!raw)
+ return;
+
+ debugfs_remove_recursive(raw->dentry);
+
+ cancel_work_sync(&raw->waiters_work);
+ destroy_workqueue(raw->wait_wq);
+ xa_destroy(&raw->chans_q);
+}
+
+static int scmi_xfer_raw_collect(void *msg, size_t *msg_len,
+ struct scmi_xfer *xfer)
+{
+ __le32 *m;
+ size_t msg_size;
+
+ if (!xfer || !msg || !msg_len)
+ return -EINVAL;
+
+ /* Account for hdr ...*/
+ msg_size = xfer->rx.len + sizeof(u32);
+ /* ... and status if needed */
+ if (xfer->hdr.type != MSG_TYPE_NOTIFICATION)
+ msg_size += sizeof(u32);
+
+ if (msg_size > *msg_len)
+ return -ENOSPC;
+
+ m = msg;
+ *m = cpu_to_le32(pack_scmi_header(&xfer->hdr));
+ if (xfer->hdr.type != MSG_TYPE_NOTIFICATION)
+ *++m = cpu_to_le32(xfer->hdr.status);
+
+ memcpy(++m, xfer->rx.buf, xfer->rx.len);
+
+ *msg_len = msg_size;
+
+ return 0;
+}
+
+/**
+ * scmi_raw_message_report - Helper to report back valid reponses/notifications
+ * to raw message requests.
+ *
+ * @r: An opaque reference to the raw instance configuration
+ * @xfer: The xfer containing the message to be reported
+ * @idx: The index of the queue.
+ * @chan_id: The channel ID to use.
+ *
+ * If Raw mode is enabled, this is called from the SCMI core on the regular RX
+ * path to save and enqueue the response/notification payload carried by this
+ * xfer into a dedicated scmi_raw_buffer for later consumption by the user.
+ *
+ * This way the caller can free the related xfer immediately afterwards and the
+ * user can read back the raw message payload at its own pace (if ever) without
+ * holding an xfer for too long.
+ */
+void scmi_raw_message_report(void *r, struct scmi_xfer *xfer,
+ unsigned int idx, unsigned int chan_id)
+{
+ int ret;
+ unsigned long flags;
+ struct scmi_raw_buffer *rb;
+ struct device *dev;
+ struct scmi_raw_queue *q;
+ struct scmi_raw_mode_info *raw = r;
+
+ if (!raw || (idx == SCMI_RAW_REPLY_QUEUE && !SCMI_XFER_IS_RAW(xfer)))
+ return;
+
+ dev = raw->handle->dev;
+ q = scmi_raw_queue_select(raw, idx,
+ SCMI_XFER_IS_CHAN_SET(xfer) ? chan_id : 0);
+
+ /*
+ * Grab the msg_q_lock upfront to avoid a possible race between
+ * realizing the free list was empty and effectively picking the next
+ * buffer to use from the oldest one enqueued and still unread on this
+ * msg_q.
+ *
+ * Note that nowhere else these locks are taken together, so no risk of
+ * deadlocks du eto inversion.
+ */
+ spin_lock_irqsave(&q->msg_q_lock, flags);
+ rb = scmi_raw_buffer_get(q);
+ if (!rb) {
+ /*
+ * Immediate and delayed replies to previously injected Raw
+ * commands MUST be read back from userspace to free the buffers:
+ * if this is not happening something is seriously broken and
+ * must be fixed at the application level: complain loudly.
+ */
+ if (idx == SCMI_RAW_REPLY_QUEUE) {
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+ dev_warn(dev,
+ "RAW[%d] - Buffers exhausted. Dropping report.\n",
+ idx);
+ return;
+ }
+
+ /*
+ * Notifications and errors queues are instead handled in a
+ * circular manner: unread old buffers are just overwritten by
+ * newer ones.
+ *
+ * The main reason for this is that notifications originated
+ * by Raw requests cannot be distinguished from normal ones, so
+ * your Raw buffers queues risk to be flooded and depleted by
+ * notifications if you left it mistakenly enabled or when in
+ * coexistence mode.
+ */
+ rb = scmi_raw_buffer_dequeue_unlocked(q);
+ if (WARN_ON(!rb)) {
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+ return;
+ }
+
+ /* Reset to full buffer length */
+ rb->msg.len = rb->max_len;
+
+ dev_warn_once(dev,
+ "RAW[%d] - Buffers exhausted. Re-using oldest.\n",
+ idx);
+ }
+ spin_unlock_irqrestore(&q->msg_q_lock, flags);
+
+ ret = scmi_xfer_raw_collect(rb->msg.buf, &rb->msg.len, xfer);
+ if (ret) {
+ dev_warn(dev, "RAW - Cannot collect xfer into buffer !\n");
+ scmi_raw_buffer_put(q, rb);
+ return;
+ }
+
+ scmi_raw_buffer_enqueue(q, rb);
+}
+
+static void scmi_xfer_raw_fill(struct scmi_raw_mode_info *raw,
+ struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer, u32 msg_hdr)
+{
+ /* Unpack received HDR as it is */
+ unpack_scmi_header(msg_hdr, &xfer->hdr);
+ xfer->hdr.seq = MSG_XTRACT_TOKEN(msg_hdr);
+
+ memset(xfer->rx.buf, 0x00, xfer->rx.len);
+
+ raw->desc->ops->fetch_response(cinfo, xfer);
+}
+
+/**
+ * scmi_raw_error_report - Helper to report back timed-out or generally
+ * unexpected replies.
+ *
+ * @r: An opaque reference to the raw instance configuration
+ * @cinfo: A reference to the channel to use to retrieve the broken xfer
+ * @msg_hdr: The SCMI message header of the message to fetch and report
+ * @priv: Any private data related to the xfer.
+ *
+ * If Raw mode is enabled, this is called from the SCMI core on the RX path in
+ * case of errors to save and enqueue the bad message payload carried by the
+ * message that has just been received.
+ *
+ * Note that we have to manually fetch any available payload into a temporary
+ * xfer to be able to save and enqueue the message, since the regular RX error
+ * path which had called this would have not fetched the message payload having
+ * classified it as an error.
+ */
+void scmi_raw_error_report(void *r, struct scmi_chan_info *cinfo,
+ u32 msg_hdr, void *priv)
+{
+ struct scmi_xfer xfer;
+ struct scmi_raw_mode_info *raw = r;
+
+ if (!raw)
+ return;
+
+ xfer.rx.len = raw->desc->max_msg_size;
+ xfer.rx.buf = kzalloc(xfer.rx.len, GFP_ATOMIC);
+ if (!xfer.rx.buf) {
+ dev_info(raw->handle->dev,
+ "Cannot report Raw error for HDR:0x%X - ENOMEM\n",
+ msg_hdr);
+ return;
+ }
+
+ /* Any transport-provided priv must be passed back down to transport */
+ if (priv)
+ /* Ensure priv is visible */
+ smp_store_mb(xfer.priv, priv);
+
+ scmi_xfer_raw_fill(raw, cinfo, &xfer, msg_hdr);
+ scmi_raw_message_report(raw, &xfer, SCMI_RAW_ERRS_QUEUE, 0);
+
+ kfree(xfer.rx.buf);
+}
diff --git a/drivers/firmware/arm_scmi/raw_mode.h b/drivers/firmware/arm_scmi/raw_mode.h
new file mode 100644
index 000000000000..8af756a83fd1
--- /dev/null
+++ b/drivers/firmware/arm_scmi/raw_mode.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * System Control and Management Interface (SCMI) Message Protocol
+ * Raw mode support header.
+ *
+ * Copyright (C) 2022 ARM Ltd.
+ */
+#ifndef _SCMI_RAW_MODE_H
+#define _SCMI_RAW_MODE_H
+
+#include "common.h"
+
+enum {
+ SCMI_RAW_REPLY_QUEUE,
+ SCMI_RAW_NOTIF_QUEUE,
+ SCMI_RAW_ERRS_QUEUE,
+ SCMI_RAW_MAX_QUEUE
+};
+
+void *scmi_raw_mode_init(const struct scmi_handle *handle,
+ struct dentry *top_dentry, int instance_id,
+ u8 *channels, int num_chans,
+ const struct scmi_desc *desc, int tx_max_msg);
+void scmi_raw_mode_cleanup(void *raw);
+
+void scmi_raw_message_report(void *raw, struct scmi_xfer *xfer,
+ unsigned int idx, unsigned int chan_id);
+void scmi_raw_error_report(void *raw, struct scmi_chan_info *cinfo,
+ u32 msg_hdr, void *priv);
+
+#endif /* _SCMI_RAW_MODE_H */
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
index 87a7b13cf868..93272e4bbd12 100644
--- a/drivers/firmware/arm_scmi/smc.c
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -52,9 +52,9 @@ static irqreturn_t smc_msg_done_isr(int irq, void *data)
return IRQ_HANDLED;
}
-static bool smc_chan_available(struct device *dev, int idx)
+static bool smc_chan_available(struct device_node *of_node, int idx)
{
- struct device_node *np = of_parse_phandle(dev->of_node, "shmem", 0);
+ struct device_node *np = of_parse_phandle(of_node, "shmem", 0);
if (!np)
return false;
@@ -171,8 +171,6 @@ static int smc_chan_free(int id, void *p, void *data)
cinfo->transport_info = NULL;
scmi_info->cinfo = NULL;
- scmi_free_channel(cinfo, data, id);
-
return 0;
}
diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c
index 1db975c08896..d68c01cb7aa0 100644
--- a/drivers/firmware/arm_scmi/virtio.c
+++ b/drivers/firmware/arm_scmi/virtio.c
@@ -385,7 +385,7 @@ static int virtio_link_supplier(struct device *dev)
return 0;
}
-static bool virtio_chan_available(struct device *dev, int idx)
+static bool virtio_chan_available(struct device_node *of_node, int idx)
{
struct scmi_vio_channel *channels, *vioch = NULL;
@@ -489,8 +489,6 @@ static int virtio_chan_free(int id, void *p, void *data)
virtio_break_device(vioch->vqueue->vdev);
scmi_vio_channel_cleanup_sync(vioch);
- scmi_free_channel(cinfo, data, id);
-
return 0;
}
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
index 77aa5c6398aa..3f5ff9ed668e 100644
--- a/drivers/firmware/meson/meson_sm.c
+++ b/drivers/firmware/meson/meson_sm.c
@@ -82,7 +82,7 @@ static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size)
sm_phy_base = __meson_sm_call(cmd_shmem, 0, 0, 0, 0, 0);
if (!sm_phy_base)
- return 0;
+ return NULL;
return ioremap_cache(sm_phy_base, size);
}
diff --git a/drivers/firmware/qcom_scm-legacy.c b/drivers/firmware/qcom_scm-legacy.c
index 9f918b9e6f8f..029e6d117cb8 100644
--- a/drivers/firmware/qcom_scm-legacy.c
+++ b/drivers/firmware/qcom_scm-legacy.c
@@ -9,7 +9,7 @@
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/arm-smccc.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/firmware/qcom_scm-smc.c b/drivers/firmware/qcom_scm-smc.c
index d111833364ba..16cf88acfa8e 100644
--- a/drivers/firmware/qcom_scm-smc.c
+++ b/drivers/firmware/qcom_scm-smc.c
@@ -8,7 +8,7 @@
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/types.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/arm-smccc.h>
#include <linux/dma-mapping.h>
@@ -52,29 +52,97 @@ static void __scm_smc_do_quirk(const struct arm_smccc_args *smc,
} while (res->a0 == QCOM_SCM_INTERRUPTED);
}
-static void __scm_smc_do(const struct arm_smccc_args *smc,
- struct arm_smccc_res *res, bool atomic)
+static void fill_wq_resume_args(struct arm_smccc_args *resume, u32 smc_call_ctx)
{
- int retry_count = 0;
+ memset(resume->args, 0, sizeof(resume->args[0]) * ARRAY_SIZE(resume->args));
+
+ resume->args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
+ ARM_SMCCC_SMC_64, ARM_SMCCC_OWNER_SIP,
+ SCM_SMC_FNID(QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_RESUME));
+
+ resume->args[1] = QCOM_SCM_ARGS(1);
+
+ resume->args[2] = smc_call_ctx;
+}
+
+int scm_get_wq_ctx(u32 *wq_ctx, u32 *flags, u32 *more_pending)
+{
+ int ret;
+ struct arm_smccc_res get_wq_res;
+ struct arm_smccc_args get_wq_ctx = {0};
+
+ get_wq_ctx.args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
+ ARM_SMCCC_SMC_64, ARM_SMCCC_OWNER_SIP,
+ SCM_SMC_FNID(QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_GET_WQ_CTX));
+
+ /* Guaranteed to return only success or error, no WAITQ_* */
+ __scm_smc_do_quirk(&get_wq_ctx, &get_wq_res);
+ ret = get_wq_res.a0;
+ if (ret)
+ return ret;
+
+ *wq_ctx = get_wq_res.a1;
+ *flags = get_wq_res.a2;
+ *more_pending = get_wq_res.a3;
+
+ return 0;
+}
+
+static int __scm_smc_do_quirk_handle_waitq(struct device *dev, struct arm_smccc_args *waitq,
+ struct arm_smccc_res *res)
+{
+ int ret;
+ u32 wq_ctx, smc_call_ctx;
+ struct arm_smccc_args resume;
+ struct arm_smccc_args *smc = waitq;
+
+ do {
+ __scm_smc_do_quirk(smc, res);
+
+ if (res->a0 == QCOM_SCM_WAITQ_SLEEP) {
+ wq_ctx = res->a1;
+ smc_call_ctx = res->a2;
+
+ ret = qcom_scm_wait_for_wq_completion(wq_ctx);
+ if (ret)
+ return ret;
+
+ fill_wq_resume_args(&resume, smc_call_ctx);
+ smc = &resume;
+ }
+ } while (res->a0 == QCOM_SCM_WAITQ_SLEEP);
+
+ return 0;
+}
+
+static int __scm_smc_do(struct device *dev, struct arm_smccc_args *smc,
+ struct arm_smccc_res *res, bool atomic)
+{
+ int ret, retry_count = 0;
if (atomic) {
__scm_smc_do_quirk(smc, res);
- return;
+ return 0;
}
do {
mutex_lock(&qcom_scm_lock);
- __scm_smc_do_quirk(smc, res);
+ ret = __scm_smc_do_quirk_handle_waitq(dev, smc, res);
mutex_unlock(&qcom_scm_lock);
+ if (ret)
+ return ret;
+
if (res->a0 == QCOM_SCM_V2_EBUSY) {
if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
break;
msleep(QCOM_SCM_EBUSY_WAIT_MS);
}
} while (res->a0 == QCOM_SCM_V2_EBUSY);
+
+ return 0;
}
@@ -83,7 +151,7 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
struct qcom_scm_res *res, bool atomic)
{
int arglen = desc->arginfo & 0xf;
- int i;
+ int i, ret;
dma_addr_t args_phys = 0;
void *args_virt = NULL;
size_t alloc_len;
@@ -135,13 +203,17 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
smc.args[SCM_SMC_LAST_REG_IDX] = args_phys;
}
- __scm_smc_do(&smc, &smc_res, atomic);
+ /* ret error check follows after args_virt cleanup*/
+ ret = __scm_smc_do(dev, &smc, &smc_res, atomic);
if (args_virt) {
dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
kfree(args_virt);
}
+ if (ret)
+ return ret;
+
if (res) {
res->result[0] = smc_res.a1;
res->result[1] = smc_res.a2;
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index cdbfe54c8146..468d4d5ab550 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -4,15 +4,18 @@
*/
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/interconnect.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/reset-controller.h>
@@ -33,6 +36,7 @@ struct qcom_scm {
struct clk *iface_clk;
struct clk *bus_clk;
struct icc_path *path;
+ struct completion waitq_comp;
struct reset_controller_dev reset;
/* control access to the interconnect path */
@@ -63,6 +67,9 @@ static const u8 qcom_scm_cpu_warm_bits[QCOM_SCM_BOOT_MAX_CPUS] = {
BIT(2), BIT(1), BIT(4), BIT(6)
};
+#define QCOM_SMC_WAITQ_FLAG_WAKE_ONE BIT(0)
+#define QCOM_SMC_WAITQ_FLAG_WAKE_ALL BIT(1)
+
static const char * const qcom_scm_convention_names[] = {
[SMC_CONVENTION_UNKNOWN] = "unknown",
[SMC_CONVENTION_ARM_32] = "smc arm 32",
@@ -1325,11 +1332,79 @@ bool qcom_scm_is_available(void)
}
EXPORT_SYMBOL(qcom_scm_is_available);
+static int qcom_scm_assert_valid_wq_ctx(u32 wq_ctx)
+{
+ /* FW currently only supports a single wq_ctx (zero).
+ * TODO: Update this logic to include dynamic allocation and lookup of
+ * completion structs when FW supports more wq_ctx values.
+ */
+ if (wq_ctx != 0) {
+ dev_err(__scm->dev, "Firmware unexpectedly passed non-zero wq_ctx\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int qcom_scm_wait_for_wq_completion(u32 wq_ctx)
+{
+ int ret;
+
+ ret = qcom_scm_assert_valid_wq_ctx(wq_ctx);
+ if (ret)
+ return ret;
+
+ wait_for_completion(&__scm->waitq_comp);
+
+ return 0;
+}
+
+static int qcom_scm_waitq_wakeup(struct qcom_scm *scm, unsigned int wq_ctx)
+{
+ int ret;
+
+ ret = qcom_scm_assert_valid_wq_ctx(wq_ctx);
+ if (ret)
+ return ret;
+
+ complete(&__scm->waitq_comp);
+
+ return 0;
+}
+
+static irqreturn_t qcom_scm_irq_handler(int irq, void *data)
+{
+ int ret;
+ struct qcom_scm *scm = data;
+ u32 wq_ctx, flags, more_pending = 0;
+
+ do {
+ ret = scm_get_wq_ctx(&wq_ctx, &flags, &more_pending);
+ if (ret) {
+ dev_err(scm->dev, "GET_WQ_CTX SMC call failed: %d\n", ret);
+ goto out;
+ }
+
+ if (flags != QCOM_SMC_WAITQ_FLAG_WAKE_ONE &&
+ flags != QCOM_SMC_WAITQ_FLAG_WAKE_ALL) {
+ dev_err(scm->dev, "Invalid flags found for wq_ctx: %u\n", flags);
+ goto out;
+ }
+
+ ret = qcom_scm_waitq_wakeup(scm, wq_ctx);
+ if (ret)
+ goto out;
+ } while (more_pending);
+
+out:
+ return IRQ_HANDLED;
+}
+
static int qcom_scm_probe(struct platform_device *pdev)
{
struct qcom_scm *scm;
unsigned long clks;
- int ret;
+ int irq, ret;
scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
if (!scm)
@@ -1402,6 +1477,19 @@ static int qcom_scm_probe(struct platform_device *pdev)
__scm = scm;
__scm->dev = &pdev->dev;
+ init_completion(&__scm->waitq_comp);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ if (irq != -ENXIO)
+ return irq;
+ } else {
+ ret = devm_request_threaded_irq(__scm->dev, irq, NULL, qcom_scm_irq_handler,
+ IRQF_ONESHOT, "qcom-scm", __scm);
+ if (ret < 0)
+ return dev_err_probe(scm->dev, ret, "Failed to request qcom-scm irq\n");
+ }
+
__get_convention();
/*
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index db3d08a01209..e6e512bd57d1 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -60,6 +60,9 @@ struct qcom_scm_res {
u64 result[MAX_QCOM_SCM_RETS];
};
+int qcom_scm_wait_for_wq_completion(u32 wq_ctx);
+int scm_get_wq_ctx(u32 *wq_ctx, u32 *flags, u32 *more_pending);
+
#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
extern int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
enum qcom_scm_convention qcom_convention,
@@ -129,6 +132,10 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03
#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02
+#define QCOM_SCM_SVC_WAITQ 0x24
+#define QCOM_SCM_WAITQ_RESUME 0x02
+#define QCOM_SCM_WAITQ_GET_WQ_CTX 0x03
+
/* common error codes */
#define QCOM_SCM_V2_EBUSY -12
#define QCOM_SCM_ENOMEM -5
@@ -137,6 +144,7 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
#define QCOM_SCM_EINVAL_ARG -2
#define QCOM_SCM_ERROR -1
#define QCOM_SCM_INTERRUPTED 1
+#define QCOM_SCM_WAITQ_SLEEP 2
static inline int qcom_scm_remap_error(int err)
{
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 129f68d7a6f5..acd83d29c866 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -738,8 +738,31 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
*/
int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
{
- return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SET_SD_TAPDELAY,
- type, value, NULL);
+ u32 reg = (type == PM_TAPDELAY_INPUT) ? SD_ITAPDLY : SD_OTAPDLYSEL;
+ u32 mask = (node_id == NODE_SD_0) ? GENMASK(15, 0) : GENMASK(31, 16);
+
+ if (value) {
+ return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
+ IOCTL_SET_SD_TAPDELAY,
+ type, value, NULL);
+ }
+
+ /*
+ * Work around completely misdesigned firmware API on Xilinx ZynqMP.
+ * The IOCTL_SET_SD_TAPDELAY firmware call allows the caller to only
+ * ever set IOU_SLCR SD_ITAPDLY Register SD0_ITAPDLYENA/SD1_ITAPDLYENA
+ * bits, but there is no matching call to clear those bits. If those
+ * bits are not cleared, SDMMC tuning may fail.
+ *
+ * Luckily, there are PM_MMIO_READ/PM_MMIO_WRITE calls which seem to
+ * allow complete unrestricted access to all address space, including
+ * IOU_SLCR SD_ITAPDLY Register and all the other registers, access
+ * to which was supposed to be protected by the current firmware API.
+ *
+ * Use PM_MMIO_READ/PM_MMIO_WRITE to re-implement the missing counter
+ * part of IOCTL_SET_SD_TAPDELAY which clears SDx_ITAPDLYENA bits.
+ */
+ return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, reg, mask, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 660ba0db8900..d09221f97f71 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -5,7 +5,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/cpumask.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/pm_opp.h>
#include <linux/nvmem-consumer.h>
#include <linux/slab.h>
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 817599766329..ce6b76c45b6f 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -8,7 +8,7 @@
#include <linux/ascii85.h>
#include <linux/interconnect.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/pm_opp.h>
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c b/drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c
index e7748461cffc..0752fe373351 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c
@@ -3,7 +3,7 @@
*/
#include "hdmi.h"
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#define HDCP_REG_ENABLE 0x01
#define HDCP_REG_DISABLE 0x00
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
index 3d4ffa25e3df..4364c3401ff1 100644
--- a/drivers/input/keyboard/mtk-pmic-keys.c
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/mfd/mt6323/registers.h>
#include <linux/mfd/mt6331/registers.h>
+#include <linux/mfd/mt6357/registers.h>
#include <linux/mfd/mt6358/registers.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6397/registers.h>
@@ -90,6 +91,19 @@ static const struct mtk_pmic_regs mt6331_regs = {
.rst_lprst_mask = MTK_PMIC_MT6331_RST_DU_MASK,
};
+static const struct mtk_pmic_regs mt6357_regs = {
+ .keys_regs[MTK_PMIC_PWRKEY_INDEX] =
+ MTK_PMIC_KEYS_REGS(MT6357_TOPSTATUS,
+ 0x2, MT6357_PSC_TOP_INT_CON0, 0x5,
+ MTK_PMIC_PWRKEY_RST),
+ .keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
+ MTK_PMIC_KEYS_REGS(MT6357_TOPSTATUS,
+ 0x8, MT6357_PSC_TOP_INT_CON0, 0xa,
+ MTK_PMIC_HOMEKEY_INDEX),
+ .pmic_rst_reg = MT6357_TOP_RST_MISC,
+ .rst_lprst_mask = MTK_PMIC_RST_DU_MASK,
+};
+
static const struct mtk_pmic_regs mt6358_regs = {
.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
MTK_PMIC_KEYS_REGS(MT6358_TOPSTATUS,
@@ -277,6 +291,9 @@ static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = {
.compatible = "mediatek,mt6331-keys",
.data = &mt6331_regs,
}, {
+ .compatible = "mediatek,mt6357-keys",
+ .data = &mt6357_regs,
+ }, {
.compatible = "mediatek,mt6358-keys",
.data = &mt6358_regs,
}, {
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
index 74e9ef2fd580..b5b14108e086 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
@@ -4,7 +4,7 @@
*/
#include <linux/of_device.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/ratelimit.h>
#include "arm-smmu.h"
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index d7ad49aa997e..d1b296b95c86 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -7,7 +7,7 @@
#include <linux/adreno-smmu-priv.h>
#include <linux/delay.h>
#include <linux/of_device.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include "arm-smmu.h"
#include "arm-smmu-qcom.h"
diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
index d7be3adee426..c8b70f476cd8 100644
--- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c
+++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -27,7 +27,7 @@
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
index 07d4dceb5e72..61ff20a7e935 100644
--- a/drivers/media/platform/qcom/venus/firmware.c
+++ b/drivers/media/platform/qcom/venus/firmware.c
@@ -12,7 +12,7 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/sizes.h>
#include <linux/soc/qcom/mdt_loader.h>
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 09cd4318a83d..025bb628aaf3 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -163,14 +163,36 @@ static const struct regmap_access_table rpcif_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(rpcif_volatile_ranges),
};
+struct rpcif_priv {
+ struct device *dev;
+ void __iomem *base;
+ void __iomem *dirmap;
+ struct regmap *regmap;
+ struct reset_control *rstc;
+ struct platform_device *vdev;
+ size_t size;
+ enum rpcif_type type;
+ enum rpcif_data_dir dir;
+ u8 bus_size;
+ u8 xfer_size;
+ void *buffer;
+ u32 xferlen;
+ u32 smcr;
+ u32 smadr;
+ u32 command; /* DRCMR or SMCMR */
+ u32 option; /* DROPR or SMOPR */
+ u32 enable; /* DRENR or SMENR */
+ u32 dummy; /* DRDMCR or SMDMCR */
+ u32 ddr; /* DRDRENR or SMDRENR */
+};
/*
* Custom accessor functions to ensure SM[RW]DR[01] are always accessed with
- * proper width. Requires rpcif.xfer_size to be correctly set before!
+ * proper width. Requires rpcif_priv.xfer_size to be correctly set before!
*/
static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
{
- struct rpcif *rpc = context;
+ struct rpcif_priv *rpc = context;
switch (reg) {
case RPCIF_SMRDR0:
@@ -206,7 +228,7 @@ static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
static int rpcif_reg_write(void *context, unsigned int reg, unsigned int val)
{
- struct rpcif *rpc = context;
+ struct rpcif_priv *rpc = context;
switch (reg) {
case RPCIF_SMWDR0:
@@ -253,39 +275,18 @@ static const struct regmap_config rpcif_regmap_config = {
.volatile_table = &rpcif_volatile_table,
};
-int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
+int rpcif_sw_init(struct rpcif *rpcif, struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *res;
+ struct rpcif_priv *rpc = dev_get_drvdata(dev);
- rpc->dev = dev;
-
- rpc->base = devm_platform_ioremap_resource_byname(pdev, "regs");
- if (IS_ERR(rpc->base))
- return PTR_ERR(rpc->base);
-
- rpc->regmap = devm_regmap_init(&pdev->dev, NULL, rpc, &rpcif_regmap_config);
- if (IS_ERR(rpc->regmap)) {
- dev_err(&pdev->dev,
- "failed to init regmap for rpcif, error %ld\n",
- PTR_ERR(rpc->regmap));
- return PTR_ERR(rpc->regmap);
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
- rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(rpc->dirmap))
- return PTR_ERR(rpc->dirmap);
- rpc->size = resource_size(res);
-
- rpc->type = (uintptr_t)of_device_get_match_data(dev);
- rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-
- return PTR_ERR_OR_ZERO(rpc->rstc);
+ rpcif->dev = dev;
+ rpcif->dirmap = rpc->dirmap;
+ rpcif->size = rpc->size;
+ return 0;
}
EXPORT_SYMBOL(rpcif_sw_init);
-static void rpcif_rzg2l_timing_adjust_sdr(struct rpcif *rpc)
+static void rpcif_rzg2l_timing_adjust_sdr(struct rpcif_priv *rpc)
{
regmap_write(rpc->regmap, RPCIF_PHYWR, 0xa5390000);
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000000);
@@ -299,15 +300,17 @@ static void rpcif_rzg2l_timing_adjust_sdr(struct rpcif *rpc)
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000032);
}
-int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
+int rpcif_hw_init(struct device *dev, bool hyperflash)
{
+ struct rpcif_priv *rpc = dev_get_drvdata(dev);
u32 dummy;
+ int ret;
- pm_runtime_get_sync(rpc->dev);
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ return ret;
if (rpc->type == RPCIF_RZ_G2L) {
- int ret;
-
ret = reset_control_reset(rpc->rstc);
if (ret)
return ret;
@@ -356,7 +359,7 @@ int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
regmap_write(rpc->regmap, RPCIF_SSLDR, RPCIF_SSLDR_SPNDL(7) |
RPCIF_SSLDR_SLNDL(7) | RPCIF_SSLDR_SCKDL(7));
- pm_runtime_put(rpc->dev);
+ pm_runtime_put(dev);
rpc->bus_size = hyperflash ? 2 : 1;
@@ -364,7 +367,7 @@ int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
}
EXPORT_SYMBOL(rpcif_hw_init);
-static int wait_msg_xfer_end(struct rpcif *rpc)
+static int wait_msg_xfer_end(struct rpcif_priv *rpc)
{
u32 sts;
@@ -373,7 +376,7 @@ static int wait_msg_xfer_end(struct rpcif *rpc)
USEC_PER_SEC);
}
-static u8 rpcif_bits_set(struct rpcif *rpc, u32 nbytes)
+static u8 rpcif_bits_set(struct rpcif_priv *rpc, u32 nbytes)
{
if (rpc->bus_size == 2)
nbytes /= 2;
@@ -386,9 +389,11 @@ static u8 rpcif_bit_size(u8 buswidth)
return buswidth > 4 ? 2 : ilog2(buswidth);
}
-void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
+void rpcif_prepare(struct device *dev, const struct rpcif_op *op, u64 *offs,
size_t *len)
{
+ struct rpcif_priv *rpc = dev_get_drvdata(dev);
+
rpc->smcr = 0;
rpc->smadr = 0;
rpc->enable = 0;
@@ -430,8 +435,7 @@ void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
if (op->dummy.buswidth) {
rpc->enable |= RPCIF_SMENR_DME;
- rpc->dummy = RPCIF_SMDMCR_DMCYC(op->dummy.ncycles /
- op->dummy.buswidth);
+ rpc->dummy = RPCIF_SMDMCR_DMCYC(op->dummy.ncycles);
}
if (op->option.buswidth) {
@@ -472,12 +476,15 @@ void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
}
EXPORT_SYMBOL(rpcif_prepare);
-int rpcif_manual_xfer(struct rpcif *rpc)
+int rpcif_manual_xfer(struct device *dev)
{
+ struct rpcif_priv *rpc = dev_get_drvdata(dev);
u32 smenr, smcr, pos = 0, max = rpc->bus_size == 2 ? 8 : 4;
int ret = 0;
- pm_runtime_get_sync(rpc->dev);
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ return ret;
regmap_update_bits(rpc->regmap, RPCIF_PHYCNT,
RPCIF_PHYCNT_CAL, RPCIF_PHYCNT_CAL);
@@ -587,13 +594,13 @@ int rpcif_manual_xfer(struct rpcif *rpc)
}
exit:
- pm_runtime_put(rpc->dev);
+ pm_runtime_put(dev);
return ret;
err_out:
if (reset_control_reset(rpc->rstc))
- dev_err(rpc->dev, "Failed to reset HW\n");
- rpcif_hw_init(rpc, rpc->bus_size == 2);
+ dev_err(dev, "Failed to reset HW\n");
+ rpcif_hw_init(dev, rpc->bus_size == 2);
goto exit;
}
EXPORT_SYMBOL(rpcif_manual_xfer);
@@ -640,15 +647,19 @@ static void memcpy_fromio_readw(void *to,
}
}
-ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf)
+ssize_t rpcif_dirmap_read(struct device *dev, u64 offs, size_t len, void *buf)
{
+ struct rpcif_priv *rpc = dev_get_drvdata(dev);
loff_t from = offs & (rpc->size - 1);
size_t size = rpc->size - from;
+ int ret;
if (len > size)
len = size;
- pm_runtime_get_sync(rpc->dev);
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret < 0)
+ return ret;
regmap_update_bits(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_MD, 0);
regmap_write(rpc->regmap, RPCIF_DRCR, 0);
@@ -666,7 +677,7 @@ ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf)
else
memcpy_fromio(buf, rpc->dirmap + from, len);
- pm_runtime_put(rpc->dev);
+ pm_runtime_put(dev);
return len;
}
@@ -674,14 +685,17 @@ EXPORT_SYMBOL(rpcif_dirmap_read);
static int rpcif_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct platform_device *vdev;
struct device_node *flash;
+ struct rpcif_priv *rpc;
+ struct resource *res;
const char *name;
int ret;
- flash = of_get_next_child(pdev->dev.of_node, NULL);
+ flash = of_get_next_child(dev->of_node, NULL);
if (!flash) {
- dev_warn(&pdev->dev, "no flash node found\n");
+ dev_warn(dev, "no flash node found\n");
return -ENODEV;
}
@@ -691,16 +705,45 @@ static int rpcif_probe(struct platform_device *pdev)
name = "rpc-if-hyperflash";
} else {
of_node_put(flash);
- dev_warn(&pdev->dev, "unknown flash type\n");
+ dev_warn(dev, "unknown flash type\n");
return -ENODEV;
}
of_node_put(flash);
+ rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
+ if (!rpc)
+ return -ENOMEM;
+
+ rpc->base = devm_platform_ioremap_resource_byname(pdev, "regs");
+ if (IS_ERR(rpc->base))
+ return PTR_ERR(rpc->base);
+
+ rpc->regmap = devm_regmap_init(dev, NULL, rpc, &rpcif_regmap_config);
+ if (IS_ERR(rpc->regmap)) {
+ dev_err(dev, "failed to init regmap for rpcif, error %ld\n",
+ PTR_ERR(rpc->regmap));
+ return PTR_ERR(rpc->regmap);
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
+ rpc->dirmap = devm_ioremap_resource(dev, res);
+ if (IS_ERR(rpc->dirmap))
+ return PTR_ERR(rpc->dirmap);
+ rpc->size = resource_size(res);
+
+ rpc->type = (uintptr_t)of_device_get_match_data(dev);
+ rpc->rstc = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(rpc->rstc))
+ return PTR_ERR(rpc->rstc);
+
vdev = platform_device_alloc(name, pdev->id);
if (!vdev)
return -ENOMEM;
- vdev->dev.parent = &pdev->dev;
- platform_set_drvdata(pdev, vdev);
+ vdev->dev.parent = dev;
+
+ rpc->dev = dev;
+ rpc->vdev = vdev;
+ platform_set_drvdata(pdev, rpc);
ret = platform_device_add(vdev);
if (ret) {
@@ -713,9 +756,9 @@ static int rpcif_probe(struct platform_device *pdev)
static int rpcif_remove(struct platform_device *pdev)
{
- struct platform_device *vdev = platform_get_drvdata(pdev);
+ struct rpcif_priv *rpc = platform_get_drvdata(pdev);
- platform_device_unregister(vdev);
+ platform_device_unregister(rpc->vdev);
return 0;
}
diff --git a/drivers/memory/ti-emif-pm.c b/drivers/memory/ti-emif-pm.c
index 31d6266f008c..cef0d3beb63b 100644
--- a/drivers/memory/ti-emif-pm.c
+++ b/drivers/memory/ti-emif-pm.c
@@ -277,18 +277,13 @@ static int ti_emif_probe(struct platform_device *pdev)
int ret;
struct resource *res;
struct device *dev = &pdev->dev;
- const struct of_device_id *match;
struct ti_emif_data *emif_data;
emif_data = devm_kzalloc(dev, sizeof(*emif_data), GFP_KERNEL);
if (!emif_data)
return -ENOMEM;
- match = of_match_device(ti_emif_of_match, &pdev->dev);
- if (!match)
- return -ENODEV;
-
- emif_data->pm_data.ti_emif_sram_config = (unsigned long)match->data;
+ emif_data->pm_data.ti_emif_sram_config = (unsigned long) device_get_match_data(&pdev->dev);
emif_data->pm_data.ti_emif_base_addr_virt = devm_platform_get_and_ioremap_resource(pdev,
0,
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 7ccaca1b7cb8..a701132638cf 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -18,7 +18,7 @@
#include <linux/rpmsg.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <uapi/misc/fastrpc.h>
#include <linux/of_reserved_mem.h>
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 4ac8651d0b29..8ac81d57a3df 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -13,7 +13,7 @@
#include <linux/pm_opp.h>
#include <linux/slab.h>
#include <linux/iopoll.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/regulator/consumer.h>
#include <linux/interconnect.h>
#include <linux/pinctrl/consumer.h>
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
index d00d30243403..ef32fca5f785 100644
--- a/drivers/mtd/hyperbus/rpc-if.c
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -56,7 +56,7 @@ static void rpcif_hb_prepare_read(struct rpcif *rpc, void *to,
op.data.nbytes = len;
op.data.buf.in = to;
- rpcif_prepare(rpc, &op, NULL, NULL);
+ rpcif_prepare(rpc->dev, &op, NULL, NULL);
}
static void rpcif_hb_prepare_write(struct rpcif *rpc, unsigned long to,
@@ -70,7 +70,7 @@ static void rpcif_hb_prepare_write(struct rpcif *rpc, unsigned long to,
op.data.nbytes = len;
op.data.buf.out = from;
- rpcif_prepare(rpc, &op, NULL, NULL);
+ rpcif_prepare(rpc->dev, &op, NULL, NULL);
}
static u16 rpcif_hb_read16(struct hyperbus_device *hbdev, unsigned long addr)
@@ -81,7 +81,7 @@ static u16 rpcif_hb_read16(struct hyperbus_device *hbdev, unsigned long addr)
rpcif_hb_prepare_read(&hyperbus->rpc, &data, addr, 2);
- rpcif_manual_xfer(&hyperbus->rpc);
+ rpcif_manual_xfer(hyperbus->rpc.dev);
return data.x[0];
}
@@ -94,7 +94,7 @@ static void rpcif_hb_write16(struct hyperbus_device *hbdev, unsigned long addr,
rpcif_hb_prepare_write(&hyperbus->rpc, addr, &data, 2);
- rpcif_manual_xfer(&hyperbus->rpc);
+ rpcif_manual_xfer(hyperbus->rpc.dev);
}
static void rpcif_hb_copy_from(struct hyperbus_device *hbdev, void *to,
@@ -105,7 +105,7 @@ static void rpcif_hb_copy_from(struct hyperbus_device *hbdev, void *to,
rpcif_hb_prepare_read(&hyperbus->rpc, to, from, len);
- rpcif_dirmap_read(&hyperbus->rpc, from, len, to);
+ rpcif_dirmap_read(hyperbus->rpc.dev, from, len, to);
}
static const struct hyperbus_ops rpcif_hb_ops = {
@@ -130,9 +130,9 @@ static int rpcif_hb_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, hyperbus);
- rpcif_enable_rpm(&hyperbus->rpc);
+ pm_runtime_enable(hyperbus->rpc.dev);
- error = rpcif_hw_init(&hyperbus->rpc, true);
+ error = rpcif_hw_init(hyperbus->rpc.dev, true);
if (error)
goto out_disable_rpm;
@@ -150,7 +150,7 @@ static int rpcif_hb_probe(struct platform_device *pdev)
return 0;
out_disable_rpm:
- rpcif_disable_rpm(&hyperbus->rpc);
+ pm_runtime_disable(hyperbus->rpc.dev);
return error;
}
@@ -160,7 +160,7 @@ static int rpcif_hb_remove(struct platform_device *pdev)
hyperbus_unregister_device(&hyperbus->hbdev);
- rpcif_disable_rpm(&hyperbus->rpc);
+ pm_runtime_disable(hyperbus->rpc.dev);
return 0;
}
diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
index 6cb7bf96a626..4cc8d8d6bc9b 100644
--- a/drivers/net/ipa/ipa_main.c
+++ b/drivers/net/ipa/ipa_main.c
@@ -16,7 +16,7 @@
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/pm_runtime.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/soc/qcom/mdt_loader.h>
#include "ipa.h"
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index 3f94fbf83702..90f457b8e1fe 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -13,7 +13,7 @@
#include <linux/module.h>
#include <linux/net.h>
#include <linux/platform_device.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/soc/qcom/smem.h>
#include <linux/string.h>
#include <net/sock.h>
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index 2b670ef91deb..6069fedbd8f3 100644
--- a/drivers/phy/samsung/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -83,8 +83,11 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
if (!state)
return -ENOMEM;
- state->regs = syscon_regmap_lookup_by_phandle(dev->of_node,
- "samsung,pmu-syscon");
+ state->regs = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(state->regs))
+ /* Backwards compatible way */
+ state->regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,pmu-syscon");
if (IS_ERR(state->regs)) {
dev_err(dev, "Failed to lookup PMU regmap\n");
return PTR_ERR(state->regs);
diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
index c1df1ef3ee3c..a7f67857e5b2 100644
--- a/drivers/phy/samsung/phy-exynos-mipi-video.c
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
@@ -298,7 +298,7 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct phy_provider *phy_provider;
- unsigned int i;
+ unsigned int i = 0;
phy_dev = of_device_get_match_data(dev);
if (!phy_dev)
@@ -308,7 +308,10 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
if (!state)
return -ENOMEM;
- for (i = 0; i < phy_dev->num_regmaps; i++) {
+ state->regmaps[i] = syscon_node_to_regmap(dev->parent->of_node);
+ if (!IS_ERR(state->regmaps[i]))
+ i++;
+ for (; i < phy_dev->num_regmaps; i++) {
state->regmaps[i] = syscon_regmap_lookup_by_phandle(np,
phy_dev->regmap_names[i]);
if (IS_ERR(state->regmaps[i]))
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index a69f93e74435..daeb79a9a602 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -14,7 +14,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/reboot.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 6a32f022943b..c78be9f322e6 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -174,6 +174,15 @@ config BATTERY_PMU
Say Y here to expose battery information on Apple machines
through the generic battery class.
+config BATTERY_QCOM_BATTMGR
+ tristate "Qualcomm PMIC GLINK battery manager support"
+ depends on QCOM_PMIC_GLINK
+ select AUXILIARY_BUS
+ help
+ Say Y here to enable the Qualcomm PMIC GLINK power supply driver,
+ which is used on modern Qualcomm platforms to provide battery and
+ power supply information.
+
config BATTERY_OLPC
tristate "One Laptop Per Child battery"
depends on OLPC_EC
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 3aec9bc10f3c..4adbfba02d05 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o
obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o
obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
+obj-$(CONFIG_BATTERY_QCOM_BATTMGR) += qcom_battmgr.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_SAMSUNG_SDI) += samsung-sdi-battery.o
obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
diff --git a/drivers/power/supply/qcom_battmgr.c b/drivers/power/supply/qcom_battmgr.c
new file mode 100644
index 000000000000..ec31f887184f
--- /dev/null
+++ b/drivers/power/supply/qcom_battmgr.c
@@ -0,0 +1,1411 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Ltd
+ */
+#include <linux/auxiliary_bus.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/power_supply.h>
+#include <linux/soc/qcom/pdr.h>
+#include <linux/soc/qcom/pmic_glink.h>
+#include <linux/math.h>
+#include <linux/units.h>
+
+#define BATTMGR_CHEMISTRY_LEN 4
+#define BATTMGR_STRING_LEN 128
+
+enum qcom_battmgr_variant {
+ QCOM_BATTMGR_SM8350,
+ QCOM_BATTMGR_SC8280XP,
+};
+
+#define BATTMGR_BAT_STATUS 0x1
+
+#define BATTMGR_REQUEST_NOTIFICATION 0x4
+
+#define BATTMGR_NOTIFICATION 0x7
+#define NOTIF_BAT_PROPERTY 0x30
+#define NOTIF_USB_PROPERTY 0x32
+#define NOTIF_WLS_PROPERTY 0x34
+#define NOTIF_BAT_INFO 0x81
+#define NOTIF_BAT_STATUS 0x80
+
+#define BATTMGR_BAT_INFO 0x9
+
+#define BATTMGR_BAT_DISCHARGE_TIME 0xc
+
+#define BATTMGR_BAT_CHARGE_TIME 0xd
+
+#define BATTMGR_BAT_PROPERTY_GET 0x30
+#define BATTMGR_BAT_PROPERTY_SET 0x31
+#define BATT_STATUS 0
+#define BATT_HEALTH 1
+#define BATT_PRESENT 2
+#define BATT_CHG_TYPE 3
+#define BATT_CAPACITY 4
+#define BATT_SOH 5
+#define BATT_VOLT_OCV 6
+#define BATT_VOLT_NOW 7
+#define BATT_VOLT_MAX 8
+#define BATT_CURR_NOW 9
+#define BATT_CHG_CTRL_LIM 10
+#define BATT_CHG_CTRL_LIM_MAX 11
+#define BATT_TEMP 12
+#define BATT_TECHNOLOGY 13
+#define BATT_CHG_COUNTER 14
+#define BATT_CYCLE_COUNT 15
+#define BATT_CHG_FULL_DESIGN 16
+#define BATT_CHG_FULL 17
+#define BATT_MODEL_NAME 18
+#define BATT_TTF_AVG 19
+#define BATT_TTE_AVG 20
+#define BATT_RESISTANCE 21
+#define BATT_POWER_NOW 22
+#define BATT_POWER_AVG 23
+
+#define BATTMGR_USB_PROPERTY_GET 0x32
+#define BATTMGR_USB_PROPERTY_SET 0x33
+#define USB_ONLINE 0
+#define USB_VOLT_NOW 1
+#define USB_VOLT_MAX 2
+#define USB_CURR_NOW 3
+#define USB_CURR_MAX 4
+#define USB_INPUT_CURR_LIMIT 5
+#define USB_TYPE 6
+#define USB_ADAP_TYPE 7
+#define USB_MOISTURE_DET_EN 8
+#define USB_MOISTURE_DET_STS 9
+
+#define BATTMGR_WLS_PROPERTY_GET 0x34
+#define BATTMGR_WLS_PROPERTY_SET 0x35
+#define WLS_ONLINE 0
+#define WLS_VOLT_NOW 1
+#define WLS_VOLT_MAX 2
+#define WLS_CURR_NOW 3
+#define WLS_CURR_MAX 4
+#define WLS_TYPE 5
+#define WLS_BOOST_EN 6
+
+struct qcom_battmgr_enable_request {
+ struct pmic_glink_hdr hdr;
+ __le32 battery_id;
+ __le32 power_state;
+ __le32 low_capacity;
+ __le32 high_capacity;
+};
+
+struct qcom_battmgr_property_request {
+ struct pmic_glink_hdr hdr;
+ __le32 battery;
+ __le32 property;
+ __le32 value;
+};
+
+struct qcom_battmgr_update_request {
+ struct pmic_glink_hdr hdr;
+ u32 battery_id;
+};
+
+struct qcom_battmgr_charge_time_request {
+ struct pmic_glink_hdr hdr;
+ __le32 battery_id;
+ __le32 percent;
+ __le32 reserved;
+};
+
+struct qcom_battmgr_discharge_time_request {
+ struct pmic_glink_hdr hdr;
+ __le32 battery_id;
+ __le32 rate; /* 0 for current rate */
+ __le32 reserved;
+};
+
+struct qcom_battmgr_message {
+ struct pmic_glink_hdr hdr;
+ union {
+ struct {
+ __le32 property;
+ __le32 value;
+ __le32 result;
+ } intval;
+ struct {
+ __le32 property;
+ char model[BATTMGR_STRING_LEN];
+ } strval;
+ struct {
+ /*
+ * 0: mWh
+ * 1: mAh
+ */
+ __le32 power_unit;
+ __le32 design_capacity;
+ __le32 last_full_capacity;
+ /*
+ * 0 nonrechargable
+ * 1 rechargable
+ */
+ __le32 battery_tech;
+ __le32 design_voltage; /* mV */
+ __le32 capacity_low;
+ __le32 capacity_warning;
+ __le32 cycle_count;
+ /* thousandth of persent */
+ __le32 accuracy;
+ __le32 max_sample_time_ms;
+ __le32 min_sample_time_ms;
+ __le32 max_average_interval_ms;
+ __le32 min_average_interval_ms;
+ /* granularity between low and warning */
+ __le32 capacity_granularity1;
+ /* granularity between warning and full */
+ __le32 capacity_granularity2;
+ /*
+ * 0: no
+ * 1: cold
+ * 2: hot
+ */
+ __le32 swappable;
+ __le32 capabilities;
+ char model_number[BATTMGR_STRING_LEN];
+ char serial_number[BATTMGR_STRING_LEN];
+ char battery_type[BATTMGR_STRING_LEN];
+ char oem_info[BATTMGR_STRING_LEN];
+ char battery_chemistry[BATTMGR_CHEMISTRY_LEN];
+ char uid[BATTMGR_STRING_LEN];
+ __le32 critical_bias;
+ u8 day;
+ u8 month;
+ __le16 year;
+ __le32 battery_id;
+ } info;
+ struct {
+ /*
+ * BIT(0) discharging
+ * BIT(1) charging
+ * BIT(2) critical low
+ */
+ __le32 battery_state;
+ /* mWh or mAh, based on info->power_unit */
+ __le32 capacity;
+ __le32 rate;
+ /* mv */
+ __le32 battery_voltage;
+ /*
+ * BIT(0) power online
+ * BIT(1) discharging
+ * BIT(2) charging
+ * BIT(3) battery critical
+ */
+ __le32 power_state;
+ /*
+ * 1: AC
+ * 2: USB
+ * 3: Wireless
+ */
+ __le32 charging_source;
+ __le32 temperature;
+ } status;
+ __le32 time;
+ __le32 notification;
+ };
+};
+
+#define BATTMGR_CHARGING_SOURCE_AC 1
+#define BATTMGR_CHARGING_SOURCE_USB 2
+#define BATTMGR_CHARGING_SOURCE_WIRELESS 3
+
+enum qcom_battmgr_unit {
+ QCOM_BATTMGR_UNIT_mWh = 0,
+ QCOM_BATTMGR_UNIT_mAh = 1
+};
+
+struct qcom_battmgr_info {
+ bool valid;
+
+ bool present;
+ unsigned int charge_type;
+ unsigned int design_capacity;
+ unsigned int last_full_capacity;
+ unsigned int voltage_max_design;
+ unsigned int voltage_max;
+ unsigned int capacity_low;
+ unsigned int capacity_warning;
+ unsigned int cycle_count;
+ unsigned int charge_count;
+ char model_number[BATTMGR_STRING_LEN];
+ char serial_number[BATTMGR_STRING_LEN];
+ char oem_info[BATTMGR_STRING_LEN];
+ unsigned char technology;
+ unsigned char day;
+ unsigned char month;
+ unsigned short year;
+};
+
+struct qcom_battmgr_status {
+ unsigned int status;
+ unsigned int health;
+ unsigned int capacity;
+ unsigned int percent;
+ int current_now;
+ int power_now;
+ unsigned int voltage_now;
+ unsigned int voltage_ocv;
+ unsigned int temperature;
+
+ unsigned int discharge_time;
+ unsigned int charge_time;
+};
+
+struct qcom_battmgr_ac {
+ bool online;
+};
+
+struct qcom_battmgr_usb {
+ bool online;
+ unsigned int voltage_now;
+ unsigned int voltage_max;
+ unsigned int current_now;
+ unsigned int current_max;
+ unsigned int current_limit;
+ unsigned int usb_type;
+};
+
+struct qcom_battmgr_wireless {
+ bool online;
+ unsigned int voltage_now;
+ unsigned int voltage_max;
+ unsigned int current_now;
+ unsigned int current_max;
+};
+
+struct qcom_battmgr {
+ struct device *dev;
+ struct pmic_glink_client *client;
+
+ enum qcom_battmgr_variant variant;
+
+ struct power_supply *ac_psy;
+ struct power_supply *bat_psy;
+ struct power_supply *usb_psy;
+ struct power_supply *wls_psy;
+
+ enum qcom_battmgr_unit unit;
+
+ int error;
+ struct completion ack;
+
+ bool service_up;
+
+ struct qcom_battmgr_info info;
+ struct qcom_battmgr_status status;
+ struct qcom_battmgr_ac ac;
+ struct qcom_battmgr_usb usb;
+ struct qcom_battmgr_wireless wireless;
+
+ struct work_struct enable_work;
+
+ /*
+ * @lock is used to prevent concurrent power supply requests to the
+ * firmware, as it then stops responding.
+ */
+ struct mutex lock;
+};
+
+static int qcom_battmgr_request(struct qcom_battmgr *battmgr, void *data, size_t len)
+{
+ unsigned long left;
+ int ret;
+
+ reinit_completion(&battmgr->ack);
+
+ battmgr->error = 0;
+
+ ret = pmic_glink_send(battmgr->client, data, len);
+ if (ret < 0)
+ return ret;
+
+ left = wait_for_completion_timeout(&battmgr->ack, HZ);
+ if (!left)
+ return -ETIMEDOUT;
+
+ return battmgr->error;
+}
+
+static int qcom_battmgr_request_property(struct qcom_battmgr *battmgr, int opcode,
+ int property, u32 value)
+{
+ struct qcom_battmgr_property_request request = {
+ .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
+ .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
+ .hdr.opcode = cpu_to_le32(opcode),
+ .battery = cpu_to_le32(0),
+ .property = cpu_to_le32(property),
+ .value = cpu_to_le32(value),
+ };
+
+ return qcom_battmgr_request(battmgr, &request, sizeof(request));
+}
+
+static int qcom_battmgr_update_status(struct qcom_battmgr *battmgr)
+{
+ struct qcom_battmgr_update_request request = {
+ .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
+ .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
+ .hdr.opcode = cpu_to_le32(BATTMGR_BAT_STATUS),
+ .battery_id = cpu_to_le32(0),
+ };
+
+ return qcom_battmgr_request(battmgr, &request, sizeof(request));
+}
+
+static int qcom_battmgr_update_info(struct qcom_battmgr *battmgr)
+{
+ struct qcom_battmgr_update_request request = {
+ .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
+ .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
+ .hdr.opcode = cpu_to_le32(BATTMGR_BAT_INFO),
+ .battery_id = cpu_to_le32(0),
+ };
+
+ return qcom_battmgr_request(battmgr, &request, sizeof(request));
+}
+
+static int qcom_battmgr_update_charge_time(struct qcom_battmgr *battmgr)
+{
+ struct qcom_battmgr_charge_time_request request = {
+ .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
+ .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
+ .hdr.opcode = cpu_to_le32(BATTMGR_BAT_CHARGE_TIME),
+ .battery_id = cpu_to_le32(0),
+ .percent = cpu_to_le32(100),
+ };
+
+ return qcom_battmgr_request(battmgr, &request, sizeof(request));
+}
+
+static int qcom_battmgr_update_discharge_time(struct qcom_battmgr *battmgr)
+{
+ struct qcom_battmgr_discharge_time_request request = {
+ .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
+ .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
+ .hdr.opcode = cpu_to_le32(BATTMGR_BAT_DISCHARGE_TIME),
+ .battery_id = cpu_to_le32(0),
+ .rate = cpu_to_le32(0),
+ };
+
+ return qcom_battmgr_request(battmgr, &request, sizeof(request));
+}
+
+static const u8 sm8350_bat_prop_map[] = {
+ [POWER_SUPPLY_PROP_STATUS] = BATT_STATUS,
+ [POWER_SUPPLY_PROP_HEALTH] = BATT_HEALTH,
+ [POWER_SUPPLY_PROP_PRESENT] = BATT_PRESENT,
+ [POWER_SUPPLY_PROP_CHARGE_TYPE] = BATT_CHG_TYPE,
+ [POWER_SUPPLY_PROP_CAPACITY] = BATT_CAPACITY,
+ [POWER_SUPPLY_PROP_VOLTAGE_OCV] = BATT_VOLT_OCV,
+ [POWER_SUPPLY_PROP_VOLTAGE_NOW] = BATT_VOLT_NOW,
+ [POWER_SUPPLY_PROP_VOLTAGE_MAX] = BATT_VOLT_MAX,
+ [POWER_SUPPLY_PROP_CURRENT_NOW] = BATT_CURR_NOW,
+ [POWER_SUPPLY_PROP_TEMP] = BATT_TEMP,
+ [POWER_SUPPLY_PROP_TECHNOLOGY] = BATT_TECHNOLOGY,
+ [POWER_SUPPLY_PROP_CHARGE_COUNTER] = BATT_CHG_COUNTER,
+ [POWER_SUPPLY_PROP_CYCLE_COUNT] = BATT_CYCLE_COUNT,
+ [POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN] = BATT_CHG_FULL_DESIGN,
+ [POWER_SUPPLY_PROP_CHARGE_FULL] = BATT_CHG_FULL,
+ [POWER_SUPPLY_PROP_MODEL_NAME] = BATT_MODEL_NAME,
+ [POWER_SUPPLY_PROP_TIME_TO_FULL_AVG] = BATT_TTF_AVG,
+ [POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG] = BATT_TTE_AVG,
+ [POWER_SUPPLY_PROP_POWER_NOW] = BATT_POWER_NOW,
+};
+
+static int qcom_battmgr_bat_sm8350_update(struct qcom_battmgr *battmgr,
+ enum power_supply_property psp)
+{
+ unsigned int prop;
+ int ret;
+
+ if (psp >= ARRAY_SIZE(sm8350_bat_prop_map))
+ return -EINVAL;
+
+ prop = sm8350_bat_prop_map[psp];
+
+ mutex_lock(&battmgr->lock);
+ ret = qcom_battmgr_request_property(battmgr, BATTMGR_BAT_PROPERTY_GET, prop, 0);
+ mutex_unlock(&battmgr->lock);
+
+ return ret;
+}
+
+static int qcom_battmgr_bat_sc8280xp_update(struct qcom_battmgr *battmgr,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ mutex_lock(&battmgr->lock);
+
+ if (!battmgr->info.valid) {
+ ret = qcom_battmgr_update_info(battmgr);
+ if (ret < 0)
+ goto out_unlock;
+ battmgr->info.valid = true;
+ }
+
+ ret = qcom_battmgr_update_status(battmgr);
+ if (ret < 0)
+ goto out_unlock;
+
+ if (psp == POWER_SUPPLY_PROP_TIME_TO_FULL_AVG) {
+ ret = qcom_battmgr_update_charge_time(battmgr);
+ if (ret < 0) {
+ ret = -ENODATA;
+ goto out_unlock;
+ }
+ }
+
+ if (psp == POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG) {
+ ret = qcom_battmgr_update_discharge_time(battmgr);
+ if (ret < 0) {
+ ret = -ENODATA;
+ goto out_unlock;
+ }
+ }
+
+out_unlock:
+ mutex_unlock(&battmgr->lock);
+ return ret;
+}
+
+static int qcom_battmgr_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
+ enum qcom_battmgr_unit unit = battmgr->unit;
+ int ret;
+
+ if (!battmgr->service_up)
+ return -ENODEV;
+
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
+ else
+ ret = qcom_battmgr_bat_sm8350_update(battmgr, psp);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = battmgr->status.status;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = battmgr->info.charge_type;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = battmgr->status.health;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = battmgr->info.present;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = battmgr->info.technology;
+ break;
+ case POWER_SUPPLY_PROP_CYCLE_COUNT:
+ val->intval = battmgr->info.cycle_count;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = battmgr->info.voltage_max_design;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = battmgr->info.voltage_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = battmgr->status.voltage_now;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ val->intval = battmgr->status.voltage_ocv;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = battmgr->status.current_now;
+ break;
+ case POWER_SUPPLY_PROP_POWER_NOW:
+ val->intval = battmgr->status.power_now;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ if (unit != QCOM_BATTMGR_UNIT_mAh)
+ return -ENODATA;
+ val->intval = battmgr->info.design_capacity;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ if (unit != QCOM_BATTMGR_UNIT_mAh)
+ return -ENODATA;
+ val->intval = battmgr->info.last_full_capacity;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+ if (unit != QCOM_BATTMGR_UNIT_mAh)
+ return -ENODATA;
+ val->intval = battmgr->info.capacity_low;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ if (unit != QCOM_BATTMGR_UNIT_mAh)
+ return -ENODATA;
+ val->intval = battmgr->status.capacity;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = battmgr->info.charge_count;
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ if (unit != QCOM_BATTMGR_UNIT_mWh)
+ return -ENODATA;
+ val->intval = battmgr->info.design_capacity;
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_FULL:
+ if (unit != QCOM_BATTMGR_UNIT_mWh)
+ return -ENODATA;
+ val->intval = battmgr->info.last_full_capacity;
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_EMPTY:
+ if (unit != QCOM_BATTMGR_UNIT_mWh)
+ return -ENODATA;
+ val->intval = battmgr->info.capacity_low;
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_NOW:
+ if (unit != QCOM_BATTMGR_UNIT_mWh)
+ return -ENODATA;
+ val->intval = battmgr->status.capacity;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = battmgr->status.percent;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = battmgr->status.temperature;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ val->intval = battmgr->status.discharge_time;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+ val->intval = battmgr->status.charge_time;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
+ val->intval = battmgr->info.year;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
+ val->intval = battmgr->info.month;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
+ val->intval = battmgr->info.day;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = battmgr->info.model_number;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = battmgr->info.oem_info;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ val->strval = battmgr->info.serial_number;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const enum power_supply_property sc8280xp_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_POWER_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+ POWER_SUPPLY_PROP_ENERGY_FULL,
+ POWER_SUPPLY_PROP_ENERGY_EMPTY,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
+ POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
+ POWER_SUPPLY_PROP_MANUFACTURE_DAY,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static const struct power_supply_desc sc8280xp_bat_psy_desc = {
+ .name = "qcom-battmgr-bat",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = sc8280xp_bat_props,
+ .num_properties = ARRAY_SIZE(sc8280xp_bat_props),
+ .get_property = qcom_battmgr_bat_get_property,
+};
+
+static const enum power_supply_property sm8350_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_POWER_NOW,
+};
+
+static const struct power_supply_desc sm8350_bat_psy_desc = {
+ .name = "qcom-battmgr-bat",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = sm8350_bat_props,
+ .num_properties = ARRAY_SIZE(sm8350_bat_props),
+ .get_property = qcom_battmgr_bat_get_property,
+};
+
+static int qcom_battmgr_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
+ int ret;
+
+ if (!battmgr->service_up)
+ return -ENODEV;
+
+ ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
+ if (ret)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = battmgr->ac.online;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const enum power_supply_property sc8280xp_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc sc8280xp_ac_psy_desc = {
+ .name = "qcom-battmgr-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = sc8280xp_ac_props,
+ .num_properties = ARRAY_SIZE(sc8280xp_ac_props),
+ .get_property = qcom_battmgr_ac_get_property,
+};
+
+static const u8 sm8350_usb_prop_map[] = {
+ [POWER_SUPPLY_PROP_ONLINE] = USB_ONLINE,
+ [POWER_SUPPLY_PROP_VOLTAGE_NOW] = USB_VOLT_NOW,
+ [POWER_SUPPLY_PROP_VOLTAGE_MAX] = USB_VOLT_MAX,
+ [POWER_SUPPLY_PROP_CURRENT_NOW] = USB_CURR_NOW,
+ [POWER_SUPPLY_PROP_CURRENT_MAX] = USB_CURR_MAX,
+ [POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT] = USB_INPUT_CURR_LIMIT,
+ [POWER_SUPPLY_PROP_USB_TYPE] = USB_TYPE,
+};
+
+static int qcom_battmgr_usb_sm8350_update(struct qcom_battmgr *battmgr,
+ enum power_supply_property psp)
+{
+ unsigned int prop;
+ int ret;
+
+ if (psp >= ARRAY_SIZE(sm8350_usb_prop_map))
+ return -EINVAL;
+
+ prop = sm8350_usb_prop_map[psp];
+
+ mutex_lock(&battmgr->lock);
+ ret = qcom_battmgr_request_property(battmgr, BATTMGR_USB_PROPERTY_GET, prop, 0);
+ mutex_unlock(&battmgr->lock);
+
+ return ret;
+}
+
+static int qcom_battmgr_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
+ int ret;
+
+ if (!battmgr->service_up)
+ return -ENODEV;
+
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
+ else
+ ret = qcom_battmgr_usb_sm8350_update(battmgr, psp);
+ if (ret)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = battmgr->usb.online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = battmgr->usb.voltage_now;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = battmgr->usb.voltage_max;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = battmgr->usb.current_now;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = battmgr->usb.current_max;
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ val->intval = battmgr->usb.current_limit;
+ break;
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ val->intval = battmgr->usb.usb_type;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const enum power_supply_usb_type usb_psy_supported_types[] = {
+ POWER_SUPPLY_USB_TYPE_UNKNOWN,
+ POWER_SUPPLY_USB_TYPE_SDP,
+ POWER_SUPPLY_USB_TYPE_DCP,
+ POWER_SUPPLY_USB_TYPE_CDP,
+ POWER_SUPPLY_USB_TYPE_ACA,
+ POWER_SUPPLY_USB_TYPE_C,
+ POWER_SUPPLY_USB_TYPE_PD,
+ POWER_SUPPLY_USB_TYPE_PD_DRP,
+ POWER_SUPPLY_USB_TYPE_PD_PPS,
+ POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID,
+};
+
+static const enum power_supply_property sc8280xp_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc sc8280xp_usb_psy_desc = {
+ .name = "qcom-battmgr-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = sc8280xp_usb_props,
+ .num_properties = ARRAY_SIZE(sc8280xp_usb_props),
+ .get_property = qcom_battmgr_usb_get_property,
+ .usb_types = usb_psy_supported_types,
+ .num_usb_types = ARRAY_SIZE(usb_psy_supported_types),
+};
+
+static const enum power_supply_property sm8350_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_USB_TYPE,
+};
+
+static const struct power_supply_desc sm8350_usb_psy_desc = {
+ .name = "qcom-battmgr-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = sm8350_usb_props,
+ .num_properties = ARRAY_SIZE(sm8350_usb_props),
+ .get_property = qcom_battmgr_usb_get_property,
+ .usb_types = usb_psy_supported_types,
+ .num_usb_types = ARRAY_SIZE(usb_psy_supported_types),
+};
+
+static const u8 sm8350_wls_prop_map[] = {
+ [POWER_SUPPLY_PROP_ONLINE] = WLS_ONLINE,
+ [POWER_SUPPLY_PROP_VOLTAGE_NOW] = WLS_VOLT_NOW,
+ [POWER_SUPPLY_PROP_VOLTAGE_MAX] = WLS_VOLT_MAX,
+ [POWER_SUPPLY_PROP_CURRENT_NOW] = WLS_CURR_NOW,
+ [POWER_SUPPLY_PROP_CURRENT_MAX] = WLS_CURR_MAX,
+};
+
+static int qcom_battmgr_wls_sm8350_update(struct qcom_battmgr *battmgr,
+ enum power_supply_property psp)
+{
+ unsigned int prop;
+ int ret;
+
+ if (psp >= ARRAY_SIZE(sm8350_wls_prop_map))
+ return -EINVAL;
+
+ prop = sm8350_wls_prop_map[psp];
+
+ mutex_lock(&battmgr->lock);
+ ret = qcom_battmgr_request_property(battmgr, BATTMGR_WLS_PROPERTY_GET, prop, 0);
+ mutex_unlock(&battmgr->lock);
+
+ return ret;
+}
+
+static int qcom_battmgr_wls_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
+ int ret;
+
+ if (!battmgr->service_up)
+ return -ENODEV;
+
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
+ else
+ ret = qcom_battmgr_wls_sm8350_update(battmgr, psp);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = battmgr->wireless.online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = battmgr->wireless.voltage_now;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = battmgr->wireless.voltage_max;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = battmgr->wireless.current_now;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = battmgr->wireless.current_max;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const enum power_supply_property sc8280xp_wls_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc sc8280xp_wls_psy_desc = {
+ .name = "qcom-battmgr-wls",
+ .type = POWER_SUPPLY_TYPE_WIRELESS,
+ .properties = sc8280xp_wls_props,
+ .num_properties = ARRAY_SIZE(sc8280xp_wls_props),
+ .get_property = qcom_battmgr_wls_get_property,
+};
+
+static const enum power_supply_property sm8350_wls_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static const struct power_supply_desc sm8350_wls_psy_desc = {
+ .name = "qcom-battmgr-wls",
+ .type = POWER_SUPPLY_TYPE_WIRELESS,
+ .properties = sm8350_wls_props,
+ .num_properties = ARRAY_SIZE(sm8350_wls_props),
+ .get_property = qcom_battmgr_wls_get_property,
+};
+
+static void qcom_battmgr_notification(struct qcom_battmgr *battmgr,
+ const struct qcom_battmgr_message *msg,
+ int len)
+{
+ size_t payload_len = len - sizeof(struct pmic_glink_hdr);
+ unsigned int notification;
+
+ if (payload_len != sizeof(msg->notification)) {
+ dev_warn(battmgr->dev, "ignoring notification with invalid length\n");
+ return;
+ }
+
+ notification = le32_to_cpu(msg->notification);
+ switch (notification) {
+ case NOTIF_BAT_INFO:
+ battmgr->info.valid = false;
+ fallthrough;
+ case NOTIF_BAT_STATUS:
+ case NOTIF_BAT_PROPERTY:
+ power_supply_changed(battmgr->bat_psy);
+ break;
+ case NOTIF_USB_PROPERTY:
+ power_supply_changed(battmgr->usb_psy);
+ break;
+ case NOTIF_WLS_PROPERTY:
+ power_supply_changed(battmgr->wls_psy);
+ break;
+ default:
+ dev_err(battmgr->dev, "unknown notification: %#x\n", notification);
+ break;
+ }
+}
+
+static void qcom_battmgr_sc8280xp_strcpy(char *dest, const char *src)
+{
+ size_t len = src[0];
+
+ /* Some firmware versions return Pascal-style strings */
+ if (len < BATTMGR_STRING_LEN && len == strnlen(src + 1, BATTMGR_STRING_LEN - 1)) {
+ memcpy(dest, src + 1, len);
+ dest[len] = '\0';
+ } else {
+ memcpy(dest, src, BATTMGR_STRING_LEN);
+ }
+}
+
+static unsigned int qcom_battmgr_sc8280xp_parse_technology(const char *chemistry)
+{
+ if (!strncmp(chemistry, "LIO", BATTMGR_CHEMISTRY_LEN))
+ return POWER_SUPPLY_TECHNOLOGY_LION;
+
+ pr_err("Unknown battery technology '%s'\n", chemistry);
+ return POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+}
+
+static unsigned int qcom_battmgr_sc8280xp_convert_temp(unsigned int temperature)
+{
+ return DIV_ROUND_CLOSEST(temperature, 10);
+}
+
+static void qcom_battmgr_sc8280xp_callback(struct qcom_battmgr *battmgr,
+ const struct qcom_battmgr_message *resp,
+ size_t len)
+{
+ unsigned int opcode = le32_to_cpu(resp->hdr.opcode);
+ unsigned int source;
+ unsigned int state;
+ size_t payload_len = len - sizeof(struct pmic_glink_hdr);
+
+ if (payload_len < sizeof(__le32)) {
+ dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n",
+ opcode, len);
+ return;
+ }
+
+ switch (opcode) {
+ case BATTMGR_REQUEST_NOTIFICATION:
+ battmgr->error = 0;
+ break;
+ case BATTMGR_BAT_INFO:
+ if (payload_len != sizeof(resp->info)) {
+ dev_warn(battmgr->dev,
+ "invalid payload length for battery information request: %zd\n",
+ payload_len);
+ battmgr->error = -ENODATA;
+ return;
+ }
+
+ battmgr->unit = le32_to_cpu(resp->info.power_unit);
+
+ battmgr->info.present = true;
+ battmgr->info.design_capacity = le32_to_cpu(resp->info.design_capacity) * 1000;
+ battmgr->info.last_full_capacity = le32_to_cpu(resp->info.last_full_capacity) * 1000;
+ battmgr->info.voltage_max_design = le32_to_cpu(resp->info.design_voltage) * 1000;
+ battmgr->info.capacity_low = le32_to_cpu(resp->info.capacity_low) * 1000;
+ battmgr->info.cycle_count = le32_to_cpu(resp->info.cycle_count);
+ qcom_battmgr_sc8280xp_strcpy(battmgr->info.model_number, resp->info.model_number);
+ qcom_battmgr_sc8280xp_strcpy(battmgr->info.serial_number, resp->info.serial_number);
+ battmgr->info.technology = qcom_battmgr_sc8280xp_parse_technology(resp->info.battery_chemistry);
+ qcom_battmgr_sc8280xp_strcpy(battmgr->info.oem_info, resp->info.oem_info);
+ battmgr->info.day = resp->info.day;
+ battmgr->info.month = resp->info.month;
+ battmgr->info.year = le16_to_cpu(resp->info.year);
+ break;
+ case BATTMGR_BAT_STATUS:
+ if (payload_len != sizeof(resp->status)) {
+ dev_warn(battmgr->dev,
+ "invalid payload length for battery status request: %zd\n",
+ payload_len);
+ battmgr->error = -ENODATA;
+ return;
+ }
+
+ state = le32_to_cpu(resp->status.battery_state);
+ if (state & BIT(0))
+ battmgr->status.status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (state & BIT(1))
+ battmgr->status.status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ battmgr->status.status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ battmgr->status.capacity = le32_to_cpu(resp->status.capacity) * 1000;
+ battmgr->status.power_now = le32_to_cpu(resp->status.rate) * 1000;
+ battmgr->status.voltage_now = le32_to_cpu(resp->status.battery_voltage) * 1000;
+ battmgr->status.temperature = qcom_battmgr_sc8280xp_convert_temp(le32_to_cpu(resp->status.temperature));
+
+ source = le32_to_cpu(resp->status.charging_source);
+ battmgr->ac.online = source == BATTMGR_CHARGING_SOURCE_AC;
+ battmgr->usb.online = source == BATTMGR_CHARGING_SOURCE_USB;
+ battmgr->wireless.online = source == BATTMGR_CHARGING_SOURCE_WIRELESS;
+ break;
+ case BATTMGR_BAT_DISCHARGE_TIME:
+ battmgr->status.discharge_time = le32_to_cpu(resp->time);
+ break;
+ case BATTMGR_BAT_CHARGE_TIME:
+ battmgr->status.charge_time = le32_to_cpu(resp->time);
+ break;
+ default:
+ dev_warn(battmgr->dev, "unknown message %#x\n", opcode);
+ break;
+ }
+
+ complete(&battmgr->ack);
+}
+
+static void qcom_battmgr_sm8350_callback(struct qcom_battmgr *battmgr,
+ const struct qcom_battmgr_message *resp,
+ size_t len)
+{
+ unsigned int property;
+ unsigned int opcode = le32_to_cpu(resp->hdr.opcode);
+ size_t payload_len = len - sizeof(struct pmic_glink_hdr);
+ unsigned int val;
+
+ if (payload_len < sizeof(__le32)) {
+ dev_warn(battmgr->dev, "invalid payload length for %#x: %zd\n",
+ opcode, len);
+ return;
+ }
+
+ switch (opcode) {
+ case BATTMGR_BAT_PROPERTY_GET:
+ property = le32_to_cpu(resp->intval.property);
+ if (property == BATT_MODEL_NAME) {
+ if (payload_len != sizeof(resp->strval)) {
+ dev_warn(battmgr->dev,
+ "invalid payload length for BATT_MODEL_NAME request: %zd\n",
+ payload_len);
+ battmgr->error = -ENODATA;
+ return;
+ }
+ } else {
+ if (payload_len != sizeof(resp->intval)) {
+ dev_warn(battmgr->dev,
+ "invalid payload length for %#x request: %zd\n",
+ property, payload_len);
+ battmgr->error = -ENODATA;
+ return;
+ }
+
+ battmgr->error = le32_to_cpu(resp->intval.result);
+ if (battmgr->error)
+ goto out_complete;
+ }
+
+ switch (property) {
+ case BATT_STATUS:
+ battmgr->status.status = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_HEALTH:
+ battmgr->status.health = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_PRESENT:
+ battmgr->info.present = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CHG_TYPE:
+ battmgr->info.charge_type = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CAPACITY:
+ battmgr->status.percent = le32_to_cpu(resp->intval.value);
+ do_div(battmgr->status.percent, 100);
+ break;
+ case BATT_VOLT_OCV:
+ battmgr->status.voltage_ocv = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_VOLT_NOW:
+ battmgr->status.voltage_now = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_VOLT_MAX:
+ battmgr->info.voltage_max = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CURR_NOW:
+ battmgr->status.current_now = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_TEMP:
+ val = le32_to_cpu(resp->intval.value);
+ battmgr->status.temperature = DIV_ROUND_CLOSEST(val, 10);
+ break;
+ case BATT_TECHNOLOGY:
+ battmgr->info.technology = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CHG_COUNTER:
+ battmgr->info.charge_count = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CYCLE_COUNT:
+ battmgr->info.cycle_count = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CHG_FULL_DESIGN:
+ battmgr->info.design_capacity = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CHG_FULL:
+ battmgr->info.last_full_capacity = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_MODEL_NAME:
+ strscpy(battmgr->info.model_number, resp->strval.model, BATTMGR_STRING_LEN);
+ break;
+ case BATT_TTF_AVG:
+ battmgr->status.charge_time = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_TTE_AVG:
+ battmgr->status.discharge_time = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_POWER_NOW:
+ battmgr->status.power_now = le32_to_cpu(resp->intval.value);
+ break;
+ default:
+ dev_warn(battmgr->dev, "unknown property %#x\n", property);
+ break;
+ }
+ break;
+ case BATTMGR_USB_PROPERTY_GET:
+ property = le32_to_cpu(resp->intval.property);
+ if (payload_len != sizeof(resp->intval)) {
+ dev_warn(battmgr->dev,
+ "invalid payload length for %#x request: %zd\n",
+ property, payload_len);
+ battmgr->error = -ENODATA;
+ return;
+ }
+
+ battmgr->error = le32_to_cpu(resp->intval.result);
+ if (battmgr->error)
+ goto out_complete;
+
+ switch (property) {
+ case USB_ONLINE:
+ battmgr->usb.online = le32_to_cpu(resp->intval.value);
+ break;
+ case USB_VOLT_NOW:
+ battmgr->usb.voltage_now = le32_to_cpu(resp->intval.value);
+ break;
+ case USB_VOLT_MAX:
+ battmgr->usb.voltage_max = le32_to_cpu(resp->intval.value);
+ break;
+ case USB_CURR_NOW:
+ battmgr->usb.current_now = le32_to_cpu(resp->intval.value);
+ break;
+ case USB_CURR_MAX:
+ battmgr->usb.current_max = le32_to_cpu(resp->intval.value);
+ break;
+ case USB_INPUT_CURR_LIMIT:
+ battmgr->usb.current_limit = le32_to_cpu(resp->intval.value);
+ break;
+ case USB_TYPE:
+ battmgr->usb.usb_type = le32_to_cpu(resp->intval.value);
+ break;
+ default:
+ dev_warn(battmgr->dev, "unknown property %#x\n", property);
+ break;
+ }
+ break;
+ case BATTMGR_WLS_PROPERTY_GET:
+ property = le32_to_cpu(resp->intval.property);
+ if (payload_len != sizeof(resp->intval)) {
+ dev_warn(battmgr->dev,
+ "invalid payload length for %#x request: %zd\n",
+ property, payload_len);
+ battmgr->error = -ENODATA;
+ return;
+ }
+
+ battmgr->error = le32_to_cpu(resp->intval.result);
+ if (battmgr->error)
+ goto out_complete;
+
+ switch (property) {
+ case WLS_ONLINE:
+ battmgr->wireless.online = le32_to_cpu(resp->intval.value);
+ break;
+ case WLS_VOLT_NOW:
+ battmgr->wireless.voltage_now = le32_to_cpu(resp->intval.value);
+ break;
+ case WLS_VOLT_MAX:
+ battmgr->wireless.voltage_max = le32_to_cpu(resp->intval.value);
+ break;
+ case WLS_CURR_NOW:
+ battmgr->wireless.current_now = le32_to_cpu(resp->intval.value);
+ break;
+ case WLS_CURR_MAX:
+ battmgr->wireless.current_max = le32_to_cpu(resp->intval.value);
+ break;
+ default:
+ dev_warn(battmgr->dev, "unknown property %#x\n", property);
+ break;
+ }
+ break;
+ case BATTMGR_REQUEST_NOTIFICATION:
+ battmgr->error = 0;
+ break;
+ default:
+ dev_warn(battmgr->dev, "unknown message %#x\n", opcode);
+ break;
+ }
+
+out_complete:
+ complete(&battmgr->ack);
+}
+
+static void qcom_battmgr_callback(const void *data, size_t len, void *priv)
+{
+ const struct pmic_glink_hdr *hdr = data;
+ struct qcom_battmgr *battmgr = priv;
+ unsigned int opcode = le32_to_cpu(hdr->opcode);
+
+ if (opcode == BATTMGR_NOTIFICATION)
+ qcom_battmgr_notification(battmgr, data, len);
+ else if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ qcom_battmgr_sc8280xp_callback(battmgr, data, len);
+ else
+ qcom_battmgr_sm8350_callback(battmgr, data, len);
+}
+
+static void qcom_battmgr_enable_worker(struct work_struct *work)
+{
+ struct qcom_battmgr *battmgr = container_of(work, struct qcom_battmgr, enable_work);
+ struct qcom_battmgr_enable_request req = {
+ .hdr.owner = PMIC_GLINK_OWNER_BATTMGR,
+ .hdr.type = PMIC_GLINK_NOTIFY,
+ .hdr.opcode = BATTMGR_REQUEST_NOTIFICATION,
+ };
+ int ret;
+
+ ret = qcom_battmgr_request(battmgr, &req, sizeof(req));
+ if (ret)
+ dev_err(battmgr->dev, "failed to request power notifications\n");
+}
+
+static void qcom_battmgr_pdr_notify(void *priv, int state)
+{
+ struct qcom_battmgr *battmgr = priv;
+
+ if (state == SERVREG_SERVICE_STATE_UP) {
+ battmgr->service_up = true;
+ schedule_work(&battmgr->enable_work);
+ } else {
+ battmgr->service_up = false;
+ }
+}
+
+static const struct of_device_id qcom_battmgr_of_variants[] = {
+ { .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
+ { .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)QCOM_BATTMGR_SC8280XP },
+ /* Unmatched devices falls back to QCOM_BATTMGR_SM8350 */
+ {}
+};
+
+static char *qcom_battmgr_battery[] = { "battery" };
+
+static int qcom_battmgr_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct power_supply_config psy_cfg_supply = {};
+ struct power_supply_config psy_cfg = {};
+ const struct of_device_id *match;
+ struct qcom_battmgr *battmgr;
+ struct device *dev = &adev->dev;
+
+ battmgr = devm_kzalloc(dev, sizeof(*battmgr), GFP_KERNEL);
+ if (!battmgr)
+ return -ENOMEM;
+
+ battmgr->dev = dev;
+
+ psy_cfg.drv_data = battmgr;
+ psy_cfg.of_node = adev->dev.of_node;
+
+ psy_cfg_supply.drv_data = battmgr;
+ psy_cfg_supply.of_node = adev->dev.of_node;
+ psy_cfg_supply.supplied_to = qcom_battmgr_battery;
+ psy_cfg_supply.num_supplicants = 1;
+
+ INIT_WORK(&battmgr->enable_work, qcom_battmgr_enable_worker);
+ mutex_init(&battmgr->lock);
+ init_completion(&battmgr->ack);
+
+ match = of_match_device(qcom_battmgr_of_variants, dev->parent);
+ if (match)
+ battmgr->variant = (unsigned long)match->data;
+ else
+ battmgr->variant = QCOM_BATTMGR_SM8350;
+
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP) {
+ battmgr->bat_psy = devm_power_supply_register(dev, &sc8280xp_bat_psy_desc, &psy_cfg);
+ if (IS_ERR(battmgr->bat_psy))
+ return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
+ "failed to register battery power supply\n");
+
+ battmgr->ac_psy = devm_power_supply_register(dev, &sc8280xp_ac_psy_desc, &psy_cfg_supply);
+ if (IS_ERR(battmgr->ac_psy))
+ return dev_err_probe(dev, PTR_ERR(battmgr->ac_psy),
+ "failed to register AC power supply\n");
+
+ battmgr->usb_psy = devm_power_supply_register(dev, &sc8280xp_usb_psy_desc, &psy_cfg_supply);
+ if (IS_ERR(battmgr->usb_psy))
+ return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
+ "failed to register USB power supply\n");
+
+ battmgr->wls_psy = devm_power_supply_register(dev, &sc8280xp_wls_psy_desc, &psy_cfg_supply);
+ if (IS_ERR(battmgr->wls_psy))
+ return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
+ "failed to register wireless charing power supply\n");
+ } else {
+ battmgr->bat_psy = devm_power_supply_register(dev, &sm8350_bat_psy_desc, &psy_cfg);
+ if (IS_ERR(battmgr->bat_psy))
+ return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
+ "failed to register battery power supply\n");
+
+ battmgr->usb_psy = devm_power_supply_register(dev, &sm8350_usb_psy_desc, &psy_cfg_supply);
+ if (IS_ERR(battmgr->usb_psy))
+ return dev_err_probe(dev, PTR_ERR(battmgr->usb_psy),
+ "failed to register USB power supply\n");
+
+ battmgr->wls_psy = devm_power_supply_register(dev, &sm8350_wls_psy_desc, &psy_cfg_supply);
+ if (IS_ERR(battmgr->wls_psy))
+ return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
+ "failed to register wireless charing power supply\n");
+ }
+
+ battmgr->client = devm_pmic_glink_register_client(dev,
+ PMIC_GLINK_OWNER_BATTMGR,
+ qcom_battmgr_callback,
+ qcom_battmgr_pdr_notify,
+ battmgr);
+ return PTR_ERR_OR_ZERO(battmgr->client);
+}
+
+static const struct auxiliary_device_id qcom_battmgr_id_table[] = {
+ { .name = "pmic_glink.power-supply", },
+ {},
+};
+MODULE_DEVICE_TABLE(auxiliary, qcom_battmgr_id_table);
+
+static struct auxiliary_driver qcom_battmgr_driver = {
+ .name = "pmic_glink_power_supply",
+ .probe = qcom_battmgr_probe,
+ .id_table = qcom_battmgr_id_table,
+};
+
+module_auxiliary_driver(qcom_battmgr_driver);
+
+MODULE_DESCRIPTION("Qualcomm PMIC GLINK battery manager driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 292e22f58df3..ab053084f7a2 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -34,7 +34,7 @@
#include "qcom_pil_info.h"
#include "qcom_q6v5.h"
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#define MPSS_CRASH_REASON_SMEM 421
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 6cc4e13c5d36..0871108fb4dc 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -18,7 +18,7 @@
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/regulator/consumer.h>
#include <linux/remoteproc.h>
#include <linux/soc/qcom/mdt_loader.h>
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index f599d5d5719d..9d4d04fff8c6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/regulator/consumer.h>
#include <linux/remoteproc.h>
#include <linux/soc/qcom/mdt_loader.h>
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 5dbb09f843f7..4e176280113a 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -16,12 +16,14 @@ source "drivers/soc/litex/Kconfig"
source "drivers/soc/loongson/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/microchip/Kconfig"
+source "drivers/soc/nuvoton/Kconfig"
source "drivers/soc/pxa/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/renesas/Kconfig"
source "drivers/soc/rockchip/Kconfig"
source "drivers/soc/samsung/Kconfig"
source "drivers/soc/sifive/Kconfig"
+source "drivers/soc/starfive/Kconfig"
source "drivers/soc/sunxi/Kconfig"
source "drivers/soc/tegra/Kconfig"
source "drivers/soc/ti/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index fff513bd522d..3b0f9fb3b5c8 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -21,13 +21,15 @@ obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
obj-y += loongson/
obj-y += mediatek/
obj-y += microchip/
+obj-y += nuvoton/
obj-y += pxa/
obj-y += amlogic/
obj-y += qcom/
obj-y += renesas/
obj-y += rockchip/
obj-$(CONFIG_SOC_SAMSUNG) += samsung/
-obj-$(CONFIG_SOC_SIFIVE) += sifive/
+obj-y += sifive/
+obj-$(CONFIG_SOC_STARFIVE) += starfive/
obj-y += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-y += ti/
diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c
index dd5f2a13ceb5..f54acffc83f9 100644
--- a/drivers/soc/amlogic/meson-ee-pwrc.c
+++ b/drivers/soc/amlogic/meson-ee-pwrc.c
@@ -46,6 +46,9 @@
#define HHI_NANOQ_MEM_PD_REG1 (0x47 << 2)
#define HHI_VPU_MEM_PD_REG2 (0x4d << 2)
+#define G12A_HHI_NANOQ_MEM_PD_REG0 (0x43 << 2)
+#define G12A_HHI_NANOQ_MEM_PD_REG1 (0x44 << 2)
+
struct meson_ee_pwrc;
struct meson_ee_pwrc_domain;
@@ -106,6 +109,13 @@ static struct meson_ee_pwrc_top_domain sm1_pwrc_usb = SM1_EE_PD(17);
static struct meson_ee_pwrc_top_domain sm1_pwrc_pci = SM1_EE_PD(18);
static struct meson_ee_pwrc_top_domain sm1_pwrc_ge2d = SM1_EE_PD(19);
+static struct meson_ee_pwrc_top_domain g12a_pwrc_nna = {
+ .sleep_reg = GX_AO_RTI_GEN_PWR_SLEEP0,
+ .sleep_mask = BIT(16) | BIT(17),
+ .iso_reg = GX_AO_RTI_GEN_PWR_ISO0,
+ .iso_mask = BIT(16) | BIT(17),
+};
+
/* Memory PD Domains */
#define VPU_MEMPD(__reg) \
@@ -217,6 +227,11 @@ static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_audio[] = {
{ HHI_AUDIO_MEM_PD_REG0, GENMASK(27, 26) },
};
+static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_nna[] = {
+ { G12A_HHI_NANOQ_MEM_PD_REG0, GENMASK(31, 0) },
+ { G12A_HHI_NANOQ_MEM_PD_REG1, GENMASK(23, 0) },
+};
+
#define VPU_PD(__name, __top_pd, __mem, __is_pwr_off, __resets, __clks) \
{ \
.name = __name, \
@@ -253,6 +268,8 @@ static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
[PWRC_G12A_VPU_ID] = VPU_PD("VPU", &gx_pwrc_vpu, g12a_pwrc_mem_vpu,
pwrc_ee_is_powered_off, 11, 2),
[PWRC_G12A_ETH_ID] = MEM_PD("ETH", meson_pwrc_mem_eth),
+ [PWRC_G12A_NNA_ID] = TOP_PD("NNA", &g12a_pwrc_nna, g12a_pwrc_mem_nna,
+ pwrc_ee_is_powered_off),
};
static struct meson_ee_pwrc_domain_desc gxbb_pwrc_domains[] = {
diff --git a/drivers/soc/apple/apple-pmgr-pwrstate.c b/drivers/soc/apple/apple-pmgr-pwrstate.c
index e1122288409a..a3e2bc1d2686 100644
--- a/drivers/soc/apple/apple-pmgr-pwrstate.c
+++ b/drivers/soc/apple/apple-pmgr-pwrstate.c
@@ -116,8 +116,9 @@ static int apple_pmgr_ps_power_off(struct generic_pm_domain *genpd)
static int apple_pmgr_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
{
struct apple_pmgr_ps *ps = rcdev_to_apple_pmgr_ps(rcdev);
+ unsigned long flags;
- mutex_lock(&ps->genpd.mlock);
+ spin_lock_irqsave(&ps->genpd.slock, flags);
if (ps->genpd.status == GENPD_STATE_OFF)
dev_err(ps->dev, "PS 0x%x: asserting RESET while powered down\n", ps->offset);
@@ -129,7 +130,7 @@ static int apple_pmgr_reset_assert(struct reset_controller_dev *rcdev, unsigned
regmap_update_bits(ps->regmap, ps->offset, APPLE_PMGR_FLAGS | APPLE_PMGR_RESET,
APPLE_PMGR_RESET);
- mutex_unlock(&ps->genpd.mlock);
+ spin_unlock_irqrestore(&ps->genpd.slock, flags);
return 0;
}
@@ -137,8 +138,9 @@ static int apple_pmgr_reset_assert(struct reset_controller_dev *rcdev, unsigned
static int apple_pmgr_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
{
struct apple_pmgr_ps *ps = rcdev_to_apple_pmgr_ps(rcdev);
+ unsigned long flags;
- mutex_lock(&ps->genpd.mlock);
+ spin_lock_irqsave(&ps->genpd.slock, flags);
dev_dbg(ps->dev, "PS 0x%x: deassert reset\n", ps->offset);
regmap_update_bits(ps->regmap, ps->offset, APPLE_PMGR_FLAGS | APPLE_PMGR_RESET, 0);
@@ -147,7 +149,7 @@ static int apple_pmgr_reset_deassert(struct reset_controller_dev *rcdev, unsigne
if (ps->genpd.status == GENPD_STATE_OFF)
dev_err(ps->dev, "PS 0x%x: RESET was deasserted while powered down\n", ps->offset);
- mutex_unlock(&ps->genpd.mlock);
+ spin_unlock_irqrestore(&ps->genpd.slock, flags);
return 0;
}
@@ -222,6 +224,7 @@ static int apple_pmgr_ps_probe(struct platform_device *pdev)
return ret;
}
+ ps->genpd.flags |= GENPD_FLAG_IRQ_SAFE;
ps->genpd.name = name;
ps->genpd.power_on = apple_pmgr_ps_power_on;
ps->genpd.power_off = apple_pmgr_ps_power_off;
diff --git a/drivers/soc/apple/rtkit-crashlog.c b/drivers/soc/apple/rtkit-crashlog.c
index 732deed64660..8319e365110b 100644
--- a/drivers/soc/apple/rtkit-crashlog.c
+++ b/drivers/soc/apple/rtkit-crashlog.c
@@ -13,6 +13,17 @@
#define APPLE_RTKIT_CRASHLOG_VERSION FOURCC('C', 'v', 'e', 'r')
#define APPLE_RTKIT_CRASHLOG_MBOX FOURCC('C', 'm', 'b', 'x')
#define APPLE_RTKIT_CRASHLOG_TIME FOURCC('C', 't', 'i', 'm')
+#define APPLE_RTKIT_CRASHLOG_REGS FOURCC('C', 'r', 'g', '8')
+
+/* For COMPILE_TEST on non-ARM64 architectures */
+#ifndef PSR_MODE_EL0t
+#define PSR_MODE_EL0t 0x00000000
+#define PSR_MODE_EL1t 0x00000004
+#define PSR_MODE_EL1h 0x00000005
+#define PSR_MODE_EL2t 0x00000008
+#define PSR_MODE_EL2h 0x00000009
+#define PSR_MODE_MASK 0x0000000f
+#endif
struct apple_rtkit_crashlog_header {
u32 fourcc;
@@ -31,6 +42,24 @@ struct apple_rtkit_crashlog_mbox_entry {
};
static_assert(sizeof(struct apple_rtkit_crashlog_mbox_entry) == 0x18);
+struct apple_rtkit_crashlog_regs {
+ u32 unk_0;
+ u32 unk_4;
+ u64 regs[31];
+ u64 sp;
+ u64 pc;
+ u64 psr;
+ u64 cpacr;
+ u64 fpsr;
+ u64 fpcr;
+ u64 unk[64];
+ u64 far;
+ u64 unk_X;
+ u64 esr;
+ u64 unk_Z;
+} __packed;
+static_assert(sizeof(struct apple_rtkit_crashlog_regs) == 0x350);
+
static void apple_rtkit_crashlog_dump_str(struct apple_rtkit *rtk, u8 *bfr,
size_t size)
{
@@ -94,6 +123,66 @@ static void apple_rtkit_crashlog_dump_mailbox(struct apple_rtkit *rtk, u8 *bfr,
}
}
+static void apple_rtkit_crashlog_dump_regs(struct apple_rtkit *rtk, u8 *bfr,
+ size_t size)
+{
+ struct apple_rtkit_crashlog_regs *regs;
+ const char *el;
+ int i;
+
+ if (size < sizeof(*regs)) {
+ dev_warn(rtk->dev, "RTKit: Regs section too small: 0x%zx", size);
+ return;
+ }
+
+ regs = (struct apple_rtkit_crashlog_regs *)bfr;
+
+ switch (regs->psr & PSR_MODE_MASK) {
+ case PSR_MODE_EL0t:
+ el = "EL0t";
+ break;
+ case PSR_MODE_EL1t:
+ el = "EL1t";
+ break;
+ case PSR_MODE_EL1h:
+ el = "EL1h";
+ break;
+ case PSR_MODE_EL2t:
+ el = "EL2t";
+ break;
+ case PSR_MODE_EL2h:
+ el = "EL2h";
+ break;
+ default:
+ el = "unknown";
+ break;
+ }
+
+ dev_warn(rtk->dev, "RTKit: Exception dump:");
+ dev_warn(rtk->dev, " == Exception taken from %s ==", el);
+ dev_warn(rtk->dev, " PSR = 0x%llx", regs->psr);
+ dev_warn(rtk->dev, " PC = 0x%llx\n", regs->pc);
+ dev_warn(rtk->dev, " ESR = 0x%llx\n", regs->esr);
+ dev_warn(rtk->dev, " FAR = 0x%llx\n", regs->far);
+ dev_warn(rtk->dev, " SP = 0x%llx\n", regs->sp);
+ dev_warn(rtk->dev, "\n");
+
+ for (i = 0; i < 31; i += 4) {
+ if (i < 28)
+ dev_warn(rtk->dev,
+ " x%02d-x%02d = %016llx %016llx %016llx %016llx\n",
+ i, i + 3,
+ regs->regs[i], regs->regs[i + 1],
+ regs->regs[i + 2], regs->regs[i + 3]);
+ else
+ dev_warn(rtk->dev,
+ " x%02d-x%02d = %016llx %016llx %016llx\n", i, i + 3,
+ regs->regs[i], regs->regs[i + 1], regs->regs[i + 2]);
+ }
+
+ dev_warn(rtk->dev, "\n");
+}
+
void apple_rtkit_crashlog_dump(struct apple_rtkit *rtk, u8 *bfr, size_t size)
{
size_t offset;
@@ -140,6 +229,10 @@ void apple_rtkit_crashlog_dump(struct apple_rtkit *rtk, u8 *bfr, size_t size)
apple_rtkit_crashlog_dump_time(rtk, bfr + offset + 16,
section_size);
break;
+ case APPLE_RTKIT_CRASHLOG_REGS:
+ apple_rtkit_crashlog_dump_regs(rtk, bfr + offset + 16,
+ section_size);
+ break;
default:
dev_warn(rtk->dev,
"RTKit: Unknown crashlog section: %x",
diff --git a/drivers/soc/apple/rtkit.c b/drivers/soc/apple/rtkit.c
index 8ec74d7539eb..35ec35aa500d 100644
--- a/drivers/soc/apple/rtkit.c
+++ b/drivers/soc/apple/rtkit.c
@@ -9,6 +9,7 @@
enum {
APPLE_RTKIT_PWR_STATE_OFF = 0x00, /* power off, cannot be restarted */
APPLE_RTKIT_PWR_STATE_SLEEP = 0x01, /* sleeping, can be restarted */
+ APPLE_RTKIT_PWR_STATE_IDLE = 0x201, /* sleeping, retain state */
APPLE_RTKIT_PWR_STATE_QUIESCED = 0x10, /* running but no communication */
APPLE_RTKIT_PWR_STATE_ON = 0x20, /* normal operating state */
};
@@ -698,7 +699,7 @@ static int apple_rtkit_request_mbox_chan(struct apple_rtkit *rtk)
return 0;
}
-static struct apple_rtkit *apple_rtkit_init(struct device *dev, void *cookie,
+struct apple_rtkit *apple_rtkit_init(struct device *dev, void *cookie,
const char *mbox_name, int mbox_idx,
const struct apple_rtkit_ops *ops)
{
@@ -750,6 +751,7 @@ free_rtk:
kfree(rtk);
return ERR_PTR(ret);
}
+EXPORT_SYMBOL_GPL(apple_rtkit_init);
static int apple_rtkit_wait_for_completion(struct completion *c)
{
@@ -881,6 +883,26 @@ int apple_rtkit_shutdown(struct apple_rtkit *rtk)
}
EXPORT_SYMBOL_GPL(apple_rtkit_shutdown);
+int apple_rtkit_idle(struct apple_rtkit *rtk)
+{
+ int ret;
+
+ /* if OFF is used here the co-processor will not wake up again */
+ ret = apple_rtkit_set_ap_power_state(rtk,
+ APPLE_RTKIT_PWR_STATE_IDLE);
+ if (ret)
+ return ret;
+
+ ret = apple_rtkit_set_iop_power_state(rtk, APPLE_RTKIT_PWR_STATE_IDLE);
+ if (ret)
+ return ret;
+
+ rtk->iop_power_state = APPLE_RTKIT_PWR_STATE_IDLE;
+ rtk->ap_power_state = APPLE_RTKIT_PWR_STATE_IDLE;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(apple_rtkit_idle);
+
int apple_rtkit_quiesce(struct apple_rtkit *rtk)
{
int ret;
@@ -926,10 +948,8 @@ int apple_rtkit_wake(struct apple_rtkit *rtk)
}
EXPORT_SYMBOL_GPL(apple_rtkit_wake);
-static void apple_rtkit_free(void *data)
+void apple_rtkit_free(struct apple_rtkit *rtk)
{
- struct apple_rtkit *rtk = data;
-
mbox_free_channel(rtk->mbox_chan);
destroy_workqueue(rtk->wq);
@@ -940,6 +960,12 @@ static void apple_rtkit_free(void *data)
kfree(rtk->syslog_msg_buffer);
kfree(rtk);
}
+EXPORT_SYMBOL_GPL(apple_rtkit_free);
+
+static void apple_rtkit_free_wrapper(void *data)
+{
+ apple_rtkit_free(data);
+}
struct apple_rtkit *devm_apple_rtkit_init(struct device *dev, void *cookie,
const char *mbox_name, int mbox_idx,
@@ -952,7 +978,7 @@ struct apple_rtkit *devm_apple_rtkit_init(struct device *dev, void *cookie,
if (IS_ERR(rtk))
return rtk;
- ret = devm_add_action_or_reset(dev, apple_rtkit_free, rtk);
+ ret = devm_add_action_or_reset(dev, apple_rtkit_free_wrapper, rtk);
if (ret)
return ERR_PTR(ret);
diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 5bcd047768b6..bf51f03f77d6 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -701,14 +701,8 @@ fail:
return ret;
}
-static int bcm2835_power_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
static struct platform_driver bcm2835_power_driver = {
.probe = bcm2835_power_probe,
- .remove = bcm2835_power_remove,
.driver = {
.name = "bcm2835-power",
},
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index 4b906791d6c7..a8742fc58f01 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -28,4 +28,15 @@ config SOC_IMX9
help
If you say yes here, you get support for the NXP i.MX9 family
+config IMX8M_BLK_CTRL
+ bool
+ default SOC_IMX8M && IMX_GPCV2_PM_DOMAINS
+ depends on PM_GENERIC_DOMAINS
+ depends on COMMON_CLK
+
+config IMX9_BLK_CTRL
+ bool
+ default SOC_IMX9 && IMX_GPCV2_PM_DOMAINS
+ depends on PM_GENERIC_DOMAINS
+
endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index 7b4099ceafd6..a28c44a1f16a 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -5,7 +5,7 @@ endif
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
-obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
-obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
+obj-$(CONFIG_IMX8M_BLK_CTRL) += imx8m-blk-ctrl.o
+obj-$(CONFIG_IMX8M_BLK_CTRL) += imx8mp-blk-ctrl.o
obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
-obj-$(CONFIG_SOC_IMX9) += imx93-blk-ctrl.o
+obj-$(CONFIG_IMX9_BLK_CTRL) += imx93-blk-ctrl.o
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index ddcf6be3d8b4..399cb85105a1 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -4,6 +4,7 @@
* Copyright 2021 Pengutronix, Lucas Stach <kernel@pengutronix.de>
*/
+#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/interconnect.h>
#include <linux/module.h>
@@ -654,6 +655,10 @@ static const struct imx8m_blk_ctrl_data imx8mn_disp_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8mn_disp_blk_ctl_domain_data),
};
+#define LCDIF_ARCACHE_CTRL 0x4c
+#define LCDIF_1_RD_HURRY GENMASK(15, 13)
+#define LCDIF_0_RD_HURRY GENMASK(12, 10)
+
static int imx8mp_media_power_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -667,14 +672,24 @@ static int imx8mp_media_power_notifier(struct notifier_block *nb,
regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(8));
regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(8));
- /*
- * On power up we have no software backchannel to the GPC to
- * wait for the ADB handshake to happen, so we just delay for a
- * bit. On power down the GPC driver waits for the handshake.
- */
- if (action == GENPD_NOTIFY_ON)
+ if (action == GENPD_NOTIFY_ON) {
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
udelay(5);
+ /*
+ * Set panic read hurry level for both LCDIF interfaces to
+ * maximum priority to minimize chances of display FIFO
+ * underflow.
+ */
+ regmap_set_bits(bc->regmap, LCDIF_ARCACHE_CTRL,
+ FIELD_PREP(LCDIF_1_RD_HURRY, 7) |
+ FIELD_PREP(LCDIF_0_RD_HURRY, 7));
+ }
+
return NOTIFY_OK;
}
diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c b/drivers/soc/imx/imx8mp-blk-ctrl.c
index 0f13853901df..a0592db8fa86 100644
--- a/drivers/soc/imx/imx8mp-blk-ctrl.c
+++ b/drivers/soc/imx/imx8mp-blk-ctrl.c
@@ -4,7 +4,9 @@
* Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/interconnect.h>
#include <linux/module.h>
@@ -21,6 +23,15 @@
#define USB_CLOCK_MODULE_EN BIT(1)
#define PCIE_PHY_APB_RST BIT(4)
#define PCIE_PHY_INIT_RST BIT(5)
+#define GPR_REG1 0x4
+#define PLL_LOCK BIT(13)
+#define GPR_REG2 0x8
+#define P_PLL_MASK GENMASK(5, 0)
+#define M_PLL_MASK GENMASK(15, 6)
+#define S_PLL_MASK GENMASK(18, 16)
+#define GPR_REG3 0xc
+#define PLL_CKE BIT(17)
+#define PLL_RST BIT(31)
struct imx8mp_blk_ctrl_domain;
@@ -60,6 +71,7 @@ struct imx8mp_blk_ctrl_domain {
struct imx8mp_blk_ctrl_data {
int max_reg;
+ int (*probe) (struct imx8mp_blk_ctrl *bc);
notifier_fn_t power_notifier_fn;
void (*power_off) (struct imx8mp_blk_ctrl *bc, struct imx8mp_blk_ctrl_domain *domain);
void (*power_on) (struct imx8mp_blk_ctrl *bc, struct imx8mp_blk_ctrl_domain *domain);
@@ -73,6 +85,92 @@ to_imx8mp_blk_ctrl_domain(struct generic_pm_domain *genpd)
return container_of(genpd, struct imx8mp_blk_ctrl_domain, genpd);
}
+struct clk_hsio_pll {
+ struct clk_hw hw;
+ struct regmap *regmap;
+};
+
+static inline struct clk_hsio_pll *to_clk_hsio_pll(struct clk_hw *hw)
+{
+ return container_of(hw, struct clk_hsio_pll, hw);
+}
+
+static int clk_hsio_pll_prepare(struct clk_hw *hw)
+{
+ struct clk_hsio_pll *clk = to_clk_hsio_pll(hw);
+ u32 val;
+
+ /* set the PLL configuration */
+ regmap_update_bits(clk->regmap, GPR_REG2,
+ P_PLL_MASK | M_PLL_MASK | S_PLL_MASK,
+ FIELD_PREP(P_PLL_MASK, 12) |
+ FIELD_PREP(M_PLL_MASK, 800) |
+ FIELD_PREP(S_PLL_MASK, 4));
+
+ /* de-assert PLL reset */
+ regmap_update_bits(clk->regmap, GPR_REG3, PLL_RST, PLL_RST);
+
+ /* enable PLL */
+ regmap_update_bits(clk->regmap, GPR_REG3, PLL_CKE, PLL_CKE);
+
+ return regmap_read_poll_timeout(clk->regmap, GPR_REG1, val,
+ val & PLL_LOCK, 10, 100);
+}
+
+static void clk_hsio_pll_unprepare(struct clk_hw *hw)
+{
+ struct clk_hsio_pll *clk = to_clk_hsio_pll(hw);
+
+ regmap_update_bits(clk->regmap, GPR_REG3, PLL_RST | PLL_CKE, 0);
+}
+
+static int clk_hsio_pll_is_prepared(struct clk_hw *hw)
+{
+ struct clk_hsio_pll *clk = to_clk_hsio_pll(hw);
+
+ return regmap_test_bits(clk->regmap, GPR_REG1, PLL_LOCK);
+}
+
+static unsigned long clk_hsio_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 100000000;
+}
+
+static const struct clk_ops clk_hsio_pll_ops = {
+ .prepare = clk_hsio_pll_prepare,
+ .unprepare = clk_hsio_pll_unprepare,
+ .is_prepared = clk_hsio_pll_is_prepared,
+ .recalc_rate = clk_hsio_pll_recalc_rate,
+};
+
+static int imx8mp_hsio_blk_ctrl_probe(struct imx8mp_blk_ctrl *bc)
+{
+ struct clk_hsio_pll *clk_hsio_pll;
+ struct clk_hw *hw;
+ struct clk_init_data init = {};
+ int ret;
+
+ clk_hsio_pll = devm_kzalloc(bc->dev, sizeof(*clk_hsio_pll), GFP_KERNEL);
+ if (!clk_hsio_pll)
+ return -ENOMEM;
+
+ init.name = "hsio_pll";
+ init.ops = &clk_hsio_pll_ops;
+ init.parent_names = (const char *[]){"osc_24m"};
+ init.num_parents = 1;
+
+ clk_hsio_pll->regmap = bc->regmap;
+ clk_hsio_pll->hw.init = &init;
+
+ hw = &clk_hsio_pll->hw;
+ ret = devm_clk_hw_register(bc->dev, hw);
+ if (ret)
+ return ret;
+
+ return devm_of_clk_add_hw_provider(bc->dev, of_clk_hw_simple_get, hw);
+}
+
static void imx8mp_hsio_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
struct imx8mp_blk_ctrl_domain *domain)
{
@@ -187,6 +285,7 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hsio_domain_data[] = {
static const struct imx8mp_blk_ctrl_data imx8mp_hsio_blk_ctl_dev_data = {
.max_reg = 0x24,
+ .probe = imx8mp_hsio_blk_ctrl_probe,
.power_on = imx8mp_hsio_blk_ctrl_power_on,
.power_off = imx8mp_hsio_blk_ctrl_power_off,
.power_notifier_fn = imx8mp_hsio_power_notifier,
@@ -201,6 +300,7 @@ static const struct imx8mp_blk_ctrl_data imx8mp_hsio_blk_ctl_dev_data = {
#define HDMI_RTX_CLK_CTL3 0x70
#define HDMI_RTX_CLK_CTL4 0x80
#define HDMI_TX_CONTROL0 0x200
+#define HDMI_LCDIF_NOC_HURRY_MASK GENMASK(14, 12)
static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
struct imx8mp_blk_ctrl_domain *domain)
@@ -217,6 +317,8 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(11));
regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
BIT(4) | BIT(5) | BIT(6));
+ regmap_set_bits(bc->regmap, HDMI_TX_CONTROL0,
+ FIELD_PREP(HDMI_LCDIF_NOC_HURRY_MASK, 7));
break;
case IMX8MP_HDMIBLK_PD_PAI:
regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(17));
@@ -635,6 +737,12 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
goto cleanup_provider;
}
+ if (bc_data->probe) {
+ ret = bc_data->probe(bc);
+ if (ret)
+ goto cleanup_provider;
+ }
+
dev_set_drvdata(dev, bc);
return 0;
diff --git a/drivers/soc/imx/imx93-pd.c b/drivers/soc/imx/imx93-pd.c
index 4d235c8c4924..832deeed8fd6 100644
--- a/drivers/soc/imx/imx93-pd.c
+++ b/drivers/soc/imx/imx93-pd.c
@@ -164,7 +164,6 @@ MODULE_DEVICE_TABLE(of, imx93_pd_ids);
static struct platform_driver imx93_power_domain_driver = {
.driver = {
.name = "imx93_power_domain",
- .owner = THIS_MODULE,
.of_match_table = imx93_pd_ids,
},
.probe = imx93_pd_probe,
diff --git a/drivers/soc/imx/imx93-src.c b/drivers/soc/imx/imx93-src.c
index 4d74921cae0f..f1c2e22d5cbd 100644
--- a/drivers/soc/imx/imx93-src.c
+++ b/drivers/soc/imx/imx93-src.c
@@ -21,7 +21,6 @@ MODULE_DEVICE_TABLE(of, imx93_src_ids);
static struct platform_driver imx93_src_driver = {
.driver = {
.name = "imx93_src",
- .owner = THIS_MODULE,
.of_match_table = imx93_src_ids,
},
.probe = imx93_src_probe,
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 40d0cc600cae..d6b83a5508ca 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -44,6 +44,11 @@ config MTK_PMIC_WRAP
on different MediaTek SoCs. The PMIC wrapper is a proprietary
hardware to connect the PMIC.
+config MTK_REGULATOR_COUPLER
+ bool "MediaTek SoC Regulator Coupler" if COMPILE_TEST
+ default ARCH_MEDIATEK
+ depends on REGULATOR
+
config MTK_SCPSYS
bool "MediaTek SCPSYS Support"
default ARCH_MEDIATEK
@@ -68,7 +73,7 @@ config MTK_SCPSYS_PM_DOMAINS
tasks in the system.
config MTK_MMSYS
- bool "MediaTek MMSYS Support"
+ tristate "MediaTek MMSYS Support"
default ARCH_MEDIATEK
depends on HAS_IOMEM
help
diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
index 0e9e703c931a..8c0ddacbcde8 100644
--- a/drivers/soc/mediatek/Makefile
+++ b/drivers/soc/mediatek/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_MTK_CMDQ) += mtk-cmdq-helper.o
obj-$(CONFIG_MTK_DEVAPC) += mtk-devapc.o
obj-$(CONFIG_MTK_INFRACFG) += mtk-infracfg.o
obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o
+obj-$(CONFIG_MTK_REGULATOR_COUPLER) += mtk-regulator-coupler.o
obj-$(CONFIG_MTK_SCPSYS) += mtk-scpsys.o
obj-$(CONFIG_MTK_SCPSYS_PM_DOMAINS) += mtk-pm-domains.o
obj-$(CONFIG_MTK_MMSYS) += mtk-mmsys.o
diff --git a/drivers/soc/mediatek/mt8186-pm-domains.h b/drivers/soc/mediatek/mt8186-pm-domains.h
index 108af61854a3..fce86f79c505 100644
--- a/drivers/soc/mediatek/mt8186-pm-domains.h
+++ b/drivers/soc/mediatek/mt8186-pm-domains.h
@@ -304,7 +304,6 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8186[] = {
.ctl_offs = 0x9FC,
.pwr_sta_offs = 0x16C,
.pwr_sta2nd_offs = 0x170,
- .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
},
[MT8186_POWER_DOMAIN_ADSP_INFRA] = {
.name = "adsp_infra",
@@ -312,7 +311,6 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8186[] = {
.ctl_offs = 0x9F8,
.pwr_sta_offs = 0x16C,
.pwr_sta2nd_offs = 0x170,
- .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
},
[MT8186_POWER_DOMAIN_ADSP_TOP] = {
.name = "adsp_top",
@@ -332,7 +330,7 @@ static const struct scpsys_domain_data scpsys_domain_data_mt8186[] = {
MT8186_TOP_AXI_PROT_EN_3_CLR,
MT8186_TOP_AXI_PROT_EN_3_STA),
},
- .caps = MTK_SCPD_SRAM_ISO | MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_ACTIVE_WAKEUP,
+ .caps = MTK_SCPD_SRAM_ISO | MTK_SCPD_ACTIVE_WAKEUP,
},
};
diff --git a/drivers/soc/mediatek/mt8188-mmsys.h b/drivers/soc/mediatek/mt8188-mmsys.h
new file mode 100644
index 000000000000..448cc3761b43
--- /dev/null
+++ b/drivers/soc/mediatek/mt8188-mmsys.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_MEDIATEK_MT8188_MMSYS_H
+#define __SOC_MEDIATEK_MT8188_MMSYS_H
+
+#define MT8188_VDO0_OVL_MOUT_EN 0xf14
+#define MT8188_MOUT_DISP_OVL0_TO_DISP_RDMA0 BIT(0)
+#define MT8188_MOUT_DISP_OVL0_TO_DISP_WDMA0 BIT(1)
+#define MT8188_MOUT_DISP_OVL0_TO_DISP_OVL1 BIT(2)
+#define MT8188_MOUT_DISP_OVL1_TO_DISP_RDMA1 BIT(4)
+#define MT8188_MOUT_DISP_OVL1_TO_DISP_WDMA1 BIT(5)
+#define MT8188_MOUT_DISP_OVL1_TO_DISP_OVL0 BIT(6)
+
+#define MT8188_VDO0_SEL_IN 0xf34
+#define MT8188_VDO0_SEL_OUT 0xf38
+
+#define MT8188_VDO0_DISP_RDMA_SEL 0xf40
+#define MT8188_SOUT_DISP_RDMA0_TO_MASK GENMASK(2, 0)
+#define MT8188_SOUT_DISP_RDMA0_TO_DISP_COLOR0 (0 << 0)
+#define MT8188_SOUT_DISP_RDMA0_TO_DISP_DSI0 (1 << 0)
+#define MT8188_SOUT_DISP_RDMA0_TO_DISP_DP_INTF0 (5 << 0)
+#define MT8188_SEL_IN_DISP_RDMA0_FROM_MASK GENMASK(8, 8)
+#define MT8188_SEL_IN_DISP_RDMA0_FROM_DISP_OVL0 (0 << 8)
+#define MT8188_SEL_IN_DISP_RDMA0_FROM_DISP_RSZ0 (1 << 8)
+
+
+#define MT8188_VDO0_DSI0_SEL_IN 0xf44
+#define MT8188_SEL_IN_DSI0_FROM_MASK BIT(0)
+#define MT8188_SEL_IN_DSI0_FROM_DSC_WRAP0_OUT (0 << 0)
+#define MT8188_SEL_IN_DSI0_FROM_DISP_DITHER0 (1 << 0)
+
+#define MT8188_VDO0_DP_INTF0_SEL_IN 0xf4C
+#define MT8188_SEL_IN_DP_INTF0_FROM_MASK GENMASK(2, 0)
+#define MT8188_SEL_IN_DP_INTF0_FROM_DSC_WRAP0C1_OUT (0 << 0)
+#define MT8188_SEL_IN_DP_INTF0_FROM_VPP_MERGE (1 << 0)
+#define MT8188_SEL_IN_DP_INTF0_FROM_DISP_DITHER0 (3 << 0)
+
+#define MT8188_VDO0_DISP_DITHER0_SEL_OUT 0xf58
+#define MT8188_SOUT_DISP_DITHER0_TO_MASK GENMASK(2, 0)
+#define MT8188_SOUT_DISP_DITHER0_TO_DSC_WRAP0_IN (0 << 0)
+#define MT8188_SOUT_DISP_DITHER0_TO_DSI0 (1 << 0)
+#define MT8188_SOUT_DISP_DITHER0_TO_VPP_MERGE0 (6 << 0)
+#define MT8188_SOUT_DISP_DITHER0_TO_DP_INTF0 (7 << 0)
+
+#define MT8188_VDO0_VPP_MERGE_SEL 0xf60
+#define MT8188_SEL_IN_VPP_MERGE_FROM_MASK GENMASK(1, 0)
+#define MT8188_SEL_IN_VPP_MERGE_FROM_DSC_WRAP0_OUT (0 << 0)
+#define MT8188_SEL_IN_VPP_MERGE_FROM_DITHER0_OUT (3 << 0)
+
+#define MT8188_SOUT_VPP_MERGE_TO_MASK GENMASK(6, 4)
+#define MT8188_SOUT_VPP_MERGE_TO_DSI1 (0 << 4)
+#define MT8188_SOUT_VPP_MERGE_TO_DP_INTF0 (1 << 4)
+#define MT8188_SOUT_VPP_MERGE_TO_SINA_VIRTUAL0 (2 << 4)
+#define MT8188_SOUT_VPP_MERGE_TO_DISP_WDMA1 (3 << 4)
+#define MT8188_SOUT_VPP_MERGE_TO_DSC_WRAP0_IN (4 << 4)
+#define MT8188_SOUT_VPP_MERGE_TO_DISP_WDMA0 (5 << 4)
+#define MT8188_SOUT_VPP_MERGE_TO_DSC_WRAP1_IN_MASK GENMASK(11, 11)
+#define MT8188_SOUT_VPP_MERGE_TO_DSC_WRAP1_IN (0 << 11)
+
+#define MT8188_VDO0_DSC_WARP_SEL 0xf64
+#define MT8188_SEL_IN_DSC_WRAP0C0_IN_FROM_MASK GENMASK(0, 0)
+#define MT8188_SEL_IN_DSC_WRAP0C0_IN_FROM_DISP_DITHER0 (0 << 0)
+#define MT8188_SEL_IN_DSC_WRAP0C0_IN_FROM_VPP_MERGE (1 << 0)
+#define MT8188_SOUT_DSC_WRAP0_OUT_TO_MASK GENMASK(19, 16)
+#define MT8188_SOUT_DSC_WRAP0_OUT_TO_DSI0 BIT(16)
+#define MT8188_SOUT_DSC_WRAP0_OUT_TO_SINB_VIRTUAL0 BIT(17)
+#define MT8188_SOUT_DSC_WRAP0_OUT_TO_VPP_MERGE BIT(18)
+#define MT8188_SOUT_DSC_WRAP0_OUT_TO_DISP_WDMA0 BIT(19)
+
+static const struct mtk_mmsys_routes mmsys_mt8188_routing_table[] = {
+ {
+ DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
+ MT8188_VDO0_OVL_MOUT_EN, MT8188_MOUT_DISP_OVL0_TO_DISP_RDMA0,
+ MT8188_MOUT_DISP_OVL0_TO_DISP_RDMA0
+ }, {
+ DDP_COMPONENT_OVL0, DDP_COMPONENT_WDMA0,
+ MT8188_VDO0_OVL_MOUT_EN, MT8188_MOUT_DISP_OVL0_TO_DISP_WDMA0,
+ MT8188_MOUT_DISP_OVL0_TO_DISP_WDMA0
+ }, {
+ DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
+ MT8188_VDO0_DISP_RDMA_SEL, MT8188_SEL_IN_DISP_RDMA0_FROM_MASK,
+ MT8188_SEL_IN_DISP_RDMA0_FROM_DISP_OVL0
+ }, {
+ DDP_COMPONENT_DITHER0, DDP_COMPONENT_DSI0,
+ MT8188_VDO0_DSI0_SEL_IN, MT8188_SEL_IN_DSI0_FROM_MASK,
+ MT8188_SEL_IN_DSI0_FROM_DISP_DITHER0
+ }, {
+ DDP_COMPONENT_DITHER0, DDP_COMPONENT_MERGE0,
+ MT8188_VDO0_VPP_MERGE_SEL, MT8188_SEL_IN_VPP_MERGE_FROM_MASK,
+ MT8188_SEL_IN_VPP_MERGE_FROM_DITHER0_OUT
+ }, {
+ DDP_COMPONENT_DITHER0, DDP_COMPONENT_DSC0,
+ MT8188_VDO0_DSC_WARP_SEL,
+ MT8188_SEL_IN_DSC_WRAP0C0_IN_FROM_MASK,
+ MT8188_SEL_IN_DSC_WRAP0C0_IN_FROM_DISP_DITHER0
+ }, {
+ DDP_COMPONENT_DITHER0, DDP_COMPONENT_DP_INTF0,
+ MT8188_VDO0_DP_INTF0_SEL_IN, MT8188_SEL_IN_DP_INTF0_FROM_MASK,
+ MT8188_SEL_IN_DP_INTF0_FROM_DISP_DITHER0
+ }, {
+ DDP_COMPONENT_DSC0, DDP_COMPONENT_MERGE0,
+ MT8188_VDO0_VPP_MERGE_SEL, MT8188_SEL_IN_VPP_MERGE_FROM_MASK,
+ MT8188_SEL_IN_VPP_MERGE_FROM_DSC_WRAP0_OUT
+ }, {
+ DDP_COMPONENT_DSC0, DDP_COMPONENT_DSI0,
+ MT8188_VDO0_DSI0_SEL_IN, MT8188_SEL_IN_DSI0_FROM_MASK,
+ MT8188_SEL_IN_DSI0_FROM_DSC_WRAP0_OUT
+ }, {
+ DDP_COMPONENT_RDMA0, DDP_COMPONENT_COLOR0,
+ MT8188_VDO0_DISP_RDMA_SEL, MT8188_SOUT_DISP_RDMA0_TO_MASK,
+ MT8188_SOUT_DISP_RDMA0_TO_DISP_COLOR0
+ }, {
+ DDP_COMPONENT_DITHER0, DDP_COMPONENT_DSI0,
+ MT8188_VDO0_DISP_DITHER0_SEL_OUT,
+ MT8188_SOUT_DISP_DITHER0_TO_MASK,
+ MT8188_SOUT_DISP_DITHER0_TO_DSI0
+ }, {
+ DDP_COMPONENT_DITHER0, DDP_COMPONENT_DP_INTF0,
+ MT8188_VDO0_DISP_DITHER0_SEL_OUT,
+ MT8188_SOUT_DISP_DITHER0_TO_MASK,
+ MT8188_SOUT_DISP_DITHER0_TO_DP_INTF0
+ }, {
+ DDP_COMPONENT_MERGE0, DDP_COMPONENT_DP_INTF0,
+ MT8188_VDO0_VPP_MERGE_SEL, MT8188_SOUT_VPP_MERGE_TO_MASK,
+ MT8188_SOUT_VPP_MERGE_TO_DP_INTF0
+ }, {
+ DDP_COMPONENT_MERGE0, DDP_COMPONENT_DPI0,
+ MT8188_VDO0_VPP_MERGE_SEL, MT8188_SOUT_VPP_MERGE_TO_MASK,
+ MT8188_SOUT_VPP_MERGE_TO_SINA_VIRTUAL0
+ }, {
+ DDP_COMPONENT_MERGE0, DDP_COMPONENT_WDMA0,
+ MT8188_VDO0_VPP_MERGE_SEL, MT8188_SOUT_VPP_MERGE_TO_MASK,
+ MT8188_SOUT_VPP_MERGE_TO_DISP_WDMA0
+ }, {
+ DDP_COMPONENT_MERGE0, DDP_COMPONENT_DSC0,
+ MT8188_VDO0_VPP_MERGE_SEL, MT8188_SOUT_VPP_MERGE_TO_MASK,
+ MT8188_SOUT_VPP_MERGE_TO_DSC_WRAP0_IN
+ }, {
+ DDP_COMPONENT_DSC0, DDP_COMPONENT_DSI0,
+ MT8188_VDO0_DSC_WARP_SEL, MT8188_SOUT_DSC_WRAP0_OUT_TO_MASK,
+ MT8188_SOUT_DSC_WRAP0_OUT_TO_DSI0
+ }, {
+ DDP_COMPONENT_DSC0, DDP_COMPONENT_MERGE0,
+ MT8188_VDO0_DSC_WARP_SEL, MT8188_SOUT_DSC_WRAP0_OUT_TO_MASK,
+ MT8188_SOUT_DSC_WRAP0_OUT_TO_VPP_MERGE
+ },
+};
+
+#endif /* __SOC_MEDIATEK_MT8188_MMSYS_H */
diff --git a/drivers/soc/mediatek/mt8188-pm-domains.h b/drivers/soc/mediatek/mt8188-pm-domains.h
new file mode 100644
index 000000000000..0692cb444ed0
--- /dev/null
+++ b/drivers/soc/mediatek/mt8188-pm-domains.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Garmin Chang <garmin.chang@mediatek.com>
+ */
+
+#ifndef __SOC_MEDIATEK_MT8188_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MT8188_PM_DOMAINS_H
+
+#include "mtk-pm-domains.h"
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/*
+ * MT8188 power domain support
+ */
+
+static const struct scpsys_domain_data scpsys_domain_data_mt8188[] = {
+ [MT8188_POWER_DOMAIN_MFG0] = {
+ .name = "mfg0",
+ .sta_mask = BIT(1),
+ .ctl_offs = 0x300,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_DOMAIN_SUPPLY,
+ },
+ [MT8188_POWER_DOMAIN_MFG1] = {
+ .name = "mfg1",
+ .sta_mask = BIT(2),
+ .ctl_offs = 0x304,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MFG1_STEP1,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_1_MFG1_STEP3,
+ MT8188_TOP_AXI_PROT_EN_1_SET,
+ MT8188_TOP_AXI_PROT_EN_1_CLR,
+ MT8188_TOP_AXI_PROT_EN_1_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP4,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MFG1_STEP5,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_MFG1_STEP6,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_DOMAIN_SUPPLY,
+ },
+ [MT8188_POWER_DOMAIN_MFG2] = {
+ .name = "mfg2",
+ .sta_mask = BIT(3),
+ .ctl_offs = 0x308,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_MFG3] = {
+ .name = "mfg3",
+ .sta_mask = BIT(4),
+ .ctl_offs = 0x30C,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_MFG4] = {
+ .name = "mfg4",
+ .sta_mask = BIT(5),
+ .ctl_offs = 0x310,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_PEXTP_MAC_P0] = {
+ .name = "pextp_mac_p0",
+ .sta_mask = BIT(10),
+ .ctl_offs = 0x324,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_PEXTP_MAC_P0_STEP1,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_PEXTP_MAC_P0_STEP2,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_PEXTP_PHY_TOP] = {
+ .name = "pextp_phy_top",
+ .sta_mask = BIT(12),
+ .ctl_offs = 0x328,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_CSIRX_TOP] = {
+ .name = "pextp_csirx_top",
+ .sta_mask = BIT(17),
+ .ctl_offs = 0x3C4,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_ETHER] = {
+ .name = "ether",
+ .sta_mask = BIT(1),
+ .ctl_offs = 0x338,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_ETHER_STEP1,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_ACTIVE_WAKEUP,
+ },
+ [MT8188_POWER_DOMAIN_HDMI_TX] = {
+ .name = "hdmi_tx",
+ .sta_mask = BIT(18),
+ .ctl_offs = 0x37C,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_HDMI_TX_STEP1,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_ACTIVE_WAKEUP,
+ },
+ [MT8188_POWER_DOMAIN_ADSP_AO] = {
+ .name = "adsp_ao",
+ .sta_mask = BIT(10),
+ .ctl_offs = 0x35C,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_ADSP_AO_STEP1,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_ADSP_AO_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ },
+ .caps = MTK_SCPD_ALWAYS_ON,
+ },
+ [MT8188_POWER_DOMAIN_ADSP_INFRA] = {
+ .name = "adsp_infra",
+ .sta_mask = BIT(9),
+ .ctl_offs = 0x358,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_ADSP_INFRA_STEP1,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_ADSP_INFRA_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ },
+ .caps = MTK_SCPD_SRAM_ISO | MTK_SCPD_ALWAYS_ON,
+ },
+ [MT8188_POWER_DOMAIN_ADSP] = {
+ .name = "adsp",
+ .sta_mask = BIT(8),
+ .ctl_offs = 0x354,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_ADSP_STEP1,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_ADSP_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_SRAM_ISO | MTK_SCPD_ACTIVE_WAKEUP,
+ },
+ [MT8188_POWER_DOMAIN_AUDIO] = {
+ .name = "audio",
+ .sta_mask = BIT(6),
+ .ctl_offs = 0x34C,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_AUDIO_STEP1,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_AUDIO_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_ACTIVE_WAKEUP,
+ },
+ [MT8188_POWER_DOMAIN_AUDIO_ASRC] = {
+ .name = "audio_asrc",
+ .sta_mask = BIT(7),
+ .ctl_offs = 0x350,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_AUDIO_ASRC_STEP1,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_AUDIO_ASRC_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_VPPSYS0] = {
+ .name = "vppsys0",
+ .sta_mask = BIT(11),
+ .ctl_offs = 0x360,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_VPPSYS0_STEP1,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_VPPSYS0_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_VPPSYS0_STEP3,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_VPPSYS0_STEP4,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VPPSYS0_STEP5,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA),
+ },
+ },
+ [MT8188_POWER_DOMAIN_VDOSYS0] = {
+ .name = "vdosys0",
+ .sta_mask = BIT(13),
+ .ctl_offs = 0x368,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VDOSYS0_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_VDOSYS0_STEP2,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VDOSYS0_STEP3,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA),
+ },
+ },
+ [MT8188_POWER_DOMAIN_VDOSYS1] = {
+ .name = "vdosys1",
+ .sta_mask = BIT(14),
+ .ctl_offs = 0x36C,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VDOSYS1_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VDOSYS1_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_VDOSYS1_STEP3,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ },
+ [MT8188_POWER_DOMAIN_DP_TX] = {
+ .name = "dp_tx",
+ .sta_mask = BIT(16),
+ .ctl_offs = 0x374,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_DP_TX_STEP1,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_EDP_TX] = {
+ .name = "edp_tx",
+ .sta_mask = BIT(17),
+ .ctl_offs = 0x378,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_EDP_TX_STEP1,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_VPPSYS1] = {
+ .name = "vppsys1",
+ .sta_mask = BIT(12),
+ .ctl_offs = 0x364,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VPPSYS1_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VPPSYS1_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_VPPSYS1_STEP3,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ },
+ [MT8188_POWER_DOMAIN_WPE] = {
+ .name = "wpe",
+ .sta_mask = BIT(15),
+ .ctl_offs = 0x370,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_WPE_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_WPE_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_VDEC0] = {
+ .name = "vdec0",
+ .sta_mask = BIT(19),
+ .ctl_offs = 0x380,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VDEC0_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_VDEC0_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_VDEC1] = {
+ .name = "vdec1",
+ .sta_mask = BIT(20),
+ .ctl_offs = 0x384,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VDEC1_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VDEC1_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_VENC] = {
+ .name = "venc",
+ .sta_mask = BIT(22),
+ .ctl_offs = 0x38C,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VENC_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_VENC_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_VENC_STEP3,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_IMG_VCORE] = {
+ .name = "vcore",
+ .sta_mask = BIT(28),
+ .ctl_offs = 0x3A4,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_IMG_VCORE_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_IMG_VCORE_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_IMG_VCORE_STEP3,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_DOMAIN_SUPPLY,
+ },
+ [MT8188_POWER_DOMAIN_IMG_MAIN] = {
+ .name = "img_main",
+ .sta_mask = BIT(29),
+ .ctl_offs = 0x3A8,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_IMG_MAIN_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_IMG_MAIN_STEP2,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_DIP] = {
+ .name = "dip",
+ .sta_mask = BIT(30),
+ .ctl_offs = 0x3AC,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_IPE] = {
+ .name = "ipe",
+ .sta_mask = BIT(31),
+ .ctl_offs = 0x3B0,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_CAM_VCORE] = {
+ .name = "cam_vcore",
+ .sta_mask = BIT(27),
+ .ctl_offs = 0x3A0,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_CAM_VCORE_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_CAM_VCORE_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_1_CAM_VCORE_STEP3,
+ MT8188_TOP_AXI_PROT_EN_1_SET,
+ MT8188_TOP_AXI_PROT_EN_1_CLR,
+ MT8188_TOP_AXI_PROT_EN_1_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_CAM_VCORE_STEP4,
+ MT8188_TOP_AXI_PROT_EN_MM_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_CAM_VCORE_STEP5,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_DOMAIN_SUPPLY,
+ },
+ [MT8188_POWER_DOMAIN_CAM_MAIN] = {
+ .name = "cam_main",
+ .sta_mask = BIT(24),
+ .ctl_offs = 0x394,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_CAM_MAIN_STEP1,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_CAM_MAIN_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MM_2_CAM_MAIN_STEP3,
+ MT8188_TOP_AXI_PROT_EN_MM_2_SET,
+ MT8188_TOP_AXI_PROT_EN_MM_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_MM_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_CAM_MAIN_STEP4,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_CAM_SUBA] = {
+ .name = "cam_suba",
+ .sta_mask = BIT(25),
+ .ctl_offs = 0x398,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+ [MT8188_POWER_DOMAIN_CAM_SUBB] = {
+ .name = "cam_subb",
+ .sta_mask = BIT(26),
+ .ctl_offs = 0x39C,
+ .pwr_sta_offs = 0x16C,
+ .pwr_sta2nd_offs = 0x170,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
+ },
+};
+
+static const struct scpsys_soc_data mt8188_scpsys_data = {
+ .domains_data = scpsys_domain_data_mt8188,
+ .num_domains = ARRAY_SIZE(scpsys_domain_data_mt8188),
+};
+
+#endif /* __SOC_MEDIATEK_MT8188_PM_DOMAINS_H */
diff --git a/drivers/soc/mediatek/mt8195-mmsys.h b/drivers/soc/mediatek/mt8195-mmsys.h
index abfe94a30248..a6652ae63431 100644
--- a/drivers/soc/mediatek/mt8195-mmsys.h
+++ b/drivers/soc/mediatek/mt8195-mmsys.h
@@ -75,6 +75,77 @@
#define MT8195_SOUT_DSC_WRAP1_OUT_TO_SINA_VIRTUAL0 (2 << 16)
#define MT8195_SOUT_DSC_WRAP1_OUT_TO_VPP_MERGE (3 << 16)
+#define MT8195_VDO1_SW0_RST_B 0x1d0
+#define MT8195_VDO1_MERGE0_ASYNC_CFG_WD 0xe30
+#define MT8195_VDO1_HDRBE_ASYNC_CFG_WD 0xe70
+#define MT8195_VDO1_HDR_TOP_CFG 0xd00
+#define MT8195_VDO1_MIXER_IN1_ALPHA 0xd30
+#define MT8195_VDO1_MIXER_IN1_PAD 0xd40
+
+#define MT8195_VDO1_VPP_MERGE0_P0_SEL_IN 0xf04
+#define MT8195_VPP_MERGE0_P0_SEL_IN_FROM_MDP_RDMA0 1
+
+#define MT8195_VDO1_VPP_MERGE0_P1_SEL_IN 0xf08
+#define MT8195_VPP_MERGE0_P1_SEL_IN_FROM_MDP_RDMA1 1
+
+#define MT8195_VDO1_DISP_DPI1_SEL_IN 0xf10
+#define MT8195_DISP_DPI1_SEL_IN_FROM_VPP_MERGE4_MOUT 0
+
+#define MT8195_VDO1_DISP_DP_INTF0_SEL_IN 0xf14
+#define MT8195_DISP_DP_INTF0_SEL_IN_FROM_VPP_MERGE4_MOUT 0
+
+#define MT8195_VDO1_MERGE4_SOUT_SEL 0xf18
+#define MT8195_MERGE4_SOUT_TO_DPI1_SEL 2
+#define MT8195_MERGE4_SOUT_TO_DP_INTF0_SEL 3
+
+#define MT8195_VDO1_MIXER_IN1_SEL_IN 0xf24
+#define MT8195_MIXER_IN1_SEL_IN_FROM_MERGE0_ASYNC_SOUT 1
+
+#define MT8195_VDO1_MIXER_IN2_SEL_IN 0xf28
+#define MT8195_MIXER_IN2_SEL_IN_FROM_MERGE1_ASYNC_SOUT 1
+
+#define MT8195_VDO1_MIXER_IN3_SEL_IN 0xf2c
+#define MT8195_MIXER_IN3_SEL_IN_FROM_MERGE2_ASYNC_SOUT 1
+
+#define MT8195_VDO1_MIXER_IN4_SEL_IN 0xf30
+#define MT8195_MIXER_IN4_SEL_IN_FROM_MERGE3_ASYNC_SOUT 1
+
+#define MT8195_VDO1_MIXER_OUT_SOUT_SEL 0xf34
+#define MT8195_MIXER_SOUT_TO_MERGE4_ASYNC_SEL 1
+
+#define MT8195_VDO1_VPP_MERGE1_P0_SEL_IN 0xf3c
+#define MT8195_VPP_MERGE1_P0_SEL_IN_FROM_MDP_RDMA2 1
+
+#define MT8195_VDO1_MERGE0_ASYNC_SOUT_SEL 0xf40
+#define MT8195_SOUT_TO_MIXER_IN1_SEL 1
+
+#define MT8195_VDO1_MERGE1_ASYNC_SOUT_SEL 0xf44
+#define MT8195_SOUT_TO_MIXER_IN2_SEL 1
+
+#define MT8195_VDO1_MERGE2_ASYNC_SOUT_SEL 0xf48
+#define MT8195_SOUT_TO_MIXER_IN3_SEL 1
+
+#define MT8195_VDO1_MERGE3_ASYNC_SOUT_SEL 0xf4c
+#define MT8195_SOUT_TO_MIXER_IN4_SEL 1
+
+#define MT8195_VDO1_MERGE4_ASYNC_SEL_IN 0xf50
+#define MT8195_MERGE4_ASYNC_SEL_IN_FROM_MIXER_OUT_SOUT 1
+
+#define MT8195_VDO1_MIXER_IN1_SOUT_SEL 0xf58
+#define MT8195_MIXER_IN1_SOUT_TO_DISP_MIXER 0
+
+#define MT8195_VDO1_MIXER_IN2_SOUT_SEL 0xf5c
+#define MT8195_MIXER_IN2_SOUT_TO_DISP_MIXER 0
+
+#define MT8195_VDO1_MIXER_IN3_SOUT_SEL 0xf60
+#define MT8195_MIXER_IN3_SOUT_TO_DISP_MIXER 0
+
+#define MT8195_VDO1_MIXER_IN4_SOUT_SEL 0xf64
+#define MT8195_MIXER_IN4_SOUT_TO_DISP_MIXER 0
+
+#define MT8195_VDO1_MIXER_SOUT_SEL_IN 0xf68
+#define MT8195_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER 0
+
static const struct mtk_mmsys_routes mmsys_mt8195_routing_table[] = {
{
DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
@@ -367,4 +438,79 @@ static const struct mtk_mmsys_routes mmsys_mt8195_routing_table[] = {
}
};
+static const struct mtk_mmsys_routes mmsys_mt8195_vdo1_routing_table[] = {
+ {
+ DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1,
+ MT8195_VDO1_VPP_MERGE0_P0_SEL_IN, GENMASK(0, 0),
+ MT8195_VPP_MERGE0_P0_SEL_IN_FROM_MDP_RDMA0
+ }, {
+ DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1,
+ MT8195_VDO1_VPP_MERGE0_P1_SEL_IN, GENMASK(0, 0),
+ MT8195_VPP_MERGE0_P1_SEL_IN_FROM_MDP_RDMA1
+ }, {
+ DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2,
+ MT8195_VDO1_VPP_MERGE1_P0_SEL_IN, GENMASK(0, 0),
+ MT8195_VPP_MERGE1_P0_SEL_IN_FROM_MDP_RDMA2
+ }, {
+ DDP_COMPONENT_MERGE1, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MERGE0_ASYNC_SOUT_SEL, GENMASK(1, 0),
+ MT8195_SOUT_TO_MIXER_IN1_SEL
+ }, {
+ DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MERGE1_ASYNC_SOUT_SEL, GENMASK(1, 0),
+ MT8195_SOUT_TO_MIXER_IN2_SEL
+ }, {
+ DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MERGE2_ASYNC_SOUT_SEL, GENMASK(1, 0),
+ MT8195_SOUT_TO_MIXER_IN3_SEL
+ }, {
+ DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MERGE3_ASYNC_SOUT_SEL, GENMASK(1, 0),
+ MT8195_SOUT_TO_MIXER_IN4_SEL
+ }, {
+ DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+ MT8195_VDO1_MIXER_OUT_SOUT_SEL, GENMASK(0, 0),
+ MT8195_MIXER_SOUT_TO_MERGE4_ASYNC_SEL
+ }, {
+ DDP_COMPONENT_MERGE1, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MIXER_IN1_SEL_IN, GENMASK(0, 0),
+ MT8195_MIXER_IN1_SEL_IN_FROM_MERGE0_ASYNC_SOUT
+ }, {
+ DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MIXER_IN2_SEL_IN, GENMASK(0, 0),
+ MT8195_MIXER_IN2_SEL_IN_FROM_MERGE1_ASYNC_SOUT
+ }, {
+ DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MIXER_IN3_SEL_IN, GENMASK(0, 0),
+ MT8195_MIXER_IN3_SEL_IN_FROM_MERGE2_ASYNC_SOUT
+ }, {
+ DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER,
+ MT8195_VDO1_MIXER_IN4_SEL_IN, GENMASK(0, 0),
+ MT8195_MIXER_IN4_SEL_IN_FROM_MERGE3_ASYNC_SOUT
+ }, {
+ DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+ MT8195_VDO1_MIXER_SOUT_SEL_IN, GENMASK(2, 0),
+ MT8195_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER
+ }, {
+ DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+ MT8195_VDO1_MERGE4_ASYNC_SEL_IN, GENMASK(2, 0),
+ MT8195_MERGE4_ASYNC_SEL_IN_FROM_MIXER_OUT_SOUT
+ }, {
+ DDP_COMPONENT_MERGE5, DDP_COMPONENT_DPI1,
+ MT8195_VDO1_DISP_DPI1_SEL_IN, GENMASK(1, 0),
+ MT8195_DISP_DPI1_SEL_IN_FROM_VPP_MERGE4_MOUT
+ }, {
+ DDP_COMPONENT_MERGE5, DDP_COMPONENT_DPI1,
+ MT8195_VDO1_MERGE4_SOUT_SEL, GENMASK(1, 0),
+ MT8195_MERGE4_SOUT_TO_DPI1_SEL
+ }, {
+ DDP_COMPONENT_MERGE5, DDP_COMPONENT_DP_INTF1,
+ MT8195_VDO1_DISP_DP_INTF0_SEL_IN, GENMASK(1, 0),
+ MT8195_DISP_DP_INTF0_SEL_IN_FROM_VPP_MERGE4_MOUT
+ }, {
+ DDP_COMPONENT_MERGE5, DDP_COMPONENT_DP_INTF1,
+ MT8195_VDO1_MERGE4_SOUT_SEL, GENMASK(1, 0),
+ MT8195_MERGE4_SOUT_TO_DP_INTF0_SEL
+ }
+};
#endif /* __SOC_MEDIATEK_MT8195_MMSYS_H */
diff --git a/drivers/soc/mediatek/mtk-devapc.c b/drivers/soc/mediatek/mtk-devapc.c
index fc13334db1b1..bad139cb117e 100644
--- a/drivers/soc/mediatek/mtk-devapc.c
+++ b/drivers/soc/mediatek/mtk-devapc.c
@@ -276,19 +276,14 @@ static int mtk_devapc_probe(struct platform_device *pdev)
if (!devapc_irq)
return -EINVAL;
- ctx->infra_clk = devm_clk_get(&pdev->dev, "devapc-infra-clock");
+ ctx->infra_clk = devm_clk_get_enabled(&pdev->dev, "devapc-infra-clock");
if (IS_ERR(ctx->infra_clk))
return -EINVAL;
- if (clk_prepare_enable(ctx->infra_clk))
- return -EINVAL;
-
ret = devm_request_irq(&pdev->dev, devapc_irq, devapc_violation_irq,
IRQF_TRIGGER_NONE, "devapc", ctx);
- if (ret) {
- clk_disable_unprepare(ctx->infra_clk);
+ if (ret)
return ret;
- }
platform_set_drvdata(pdev, ctx);
@@ -303,8 +298,6 @@ static int mtk_devapc_remove(struct platform_device *pdev)
stop_devapc(ctx);
- clk_disable_unprepare(ctx->infra_clk);
-
return 0;
}
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index f3431448e843..eb4c7e57896c 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -7,6 +7,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
@@ -16,10 +17,13 @@
#include "mt8167-mmsys.h"
#include "mt8183-mmsys.h"
#include "mt8186-mmsys.h"
+#include "mt8188-mmsys.h"
#include "mt8192-mmsys.h"
#include "mt8195-mmsys.h"
#include "mt8365-mmsys.h"
+#define MMSYS_SW_RESET_PER_REG 32
+
static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
.clk_driver = "clk-mt2701-mm",
.routes = mmsys_default_routing_table,
@@ -51,6 +55,7 @@ static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
.routes = mmsys_default_routing_table,
.num_routes = ARRAY_SIZE(mmsys_default_routing_table),
.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
+ .num_resets = 32,
};
static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
@@ -58,6 +63,7 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
.routes = mmsys_mt8183_routing_table,
.num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
+ .num_resets = 32,
};
static const struct mtk_mmsys_driver_data mt8186_mmsys_driver_data = {
@@ -65,6 +71,13 @@ static const struct mtk_mmsys_driver_data mt8186_mmsys_driver_data = {
.routes = mmsys_mt8186_routing_table,
.num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
+ .num_resets = 32,
+};
+
+static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
+ .clk_driver = "clk-mt8188-vdo0",
+ .routes = mmsys_mt8188_routing_table,
+ .num_routes = ARRAY_SIZE(mmsys_mt8188_routing_table),
};
static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
@@ -72,6 +85,7 @@ static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
.routes = mmsys_mt8192_routing_table,
.num_routes = ARRAY_SIZE(mmsys_mt8192_routing_table),
.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
+ .num_resets = 32,
};
static const struct mtk_mmsys_driver_data mt8195_vdosys0_driver_data = {
@@ -80,6 +94,24 @@ static const struct mtk_mmsys_driver_data mt8195_vdosys0_driver_data = {
.num_routes = ARRAY_SIZE(mmsys_mt8195_routing_table),
};
+static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data = {
+ .clk_driver = "clk-mt8195-vdo1",
+ .routes = mmsys_mt8195_vdo1_routing_table,
+ .num_routes = ARRAY_SIZE(mmsys_mt8195_vdo1_routing_table),
+ .sw0_rst_offset = MT8195_VDO1_SW0_RST_B,
+ .num_resets = 64,
+};
+
+static const struct mtk_mmsys_driver_data mt8195_vppsys0_driver_data = {
+ .clk_driver = "clk-mt8195-vpp0",
+ .is_vppsys = true,
+};
+
+static const struct mtk_mmsys_driver_data mt8195_vppsys1_driver_data = {
+ .clk_driver = "clk-mt8195-vpp1",
+ .is_vppsys = true,
+};
+
static const struct mtk_mmsys_driver_data mt8365_mmsys_driver_data = {
.clk_driver = "clk-mt8365-mm",
.routes = mt8365_mmsys_routing_table,
@@ -91,24 +123,44 @@ struct mtk_mmsys {
const struct mtk_mmsys_driver_data *data;
spinlock_t lock; /* protects mmsys_sw_rst_b reg */
struct reset_controller_dev rcdev;
+ struct cmdq_client_reg cmdq_base;
};
+static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val,
+ struct cmdq_pkt *cmdq_pkt)
+{
+ u32 tmp;
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+ if (cmdq_pkt) {
+ if (mmsys->cmdq_base.size == 0) {
+ pr_err("mmsys lose gce property, failed to update mmsys bits with cmdq");
+ return;
+ }
+ cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
+ mmsys->cmdq_base.offset + offset, val,
+ mask);
+ return;
+ }
+#endif
+
+ tmp = readl_relaxed(mmsys->regs + offset);
+ tmp = (tmp & ~mask) | (val & mask);
+ writel_relaxed(tmp, mmsys->regs + offset);
+}
+
void mtk_mmsys_ddp_connect(struct device *dev,
enum mtk_ddp_comp_id cur,
enum mtk_ddp_comp_id next)
{
struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
const struct mtk_mmsys_routes *routes = mmsys->data->routes;
- u32 reg;
int i;
for (i = 0; i < mmsys->data->num_routes; i++)
- if (cur == routes[i].from_comp && next == routes[i].to_comp) {
- reg = readl_relaxed(mmsys->regs + routes[i].addr);
- reg &= ~routes[i].mask;
- reg |= routes[i].val;
- writel_relaxed(reg, mmsys->regs + routes[i].addr);
- }
+ if (cur == routes[i].from_comp && next == routes[i].to_comp)
+ mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
+ routes[i].val, NULL);
}
EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
@@ -118,26 +170,51 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
{
struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
const struct mtk_mmsys_routes *routes = mmsys->data->routes;
- u32 reg;
int i;
for (i = 0; i < mmsys->data->num_routes; i++)
- if (cur == routes[i].from_comp && next == routes[i].to_comp) {
- reg = readl_relaxed(mmsys->regs + routes[i].addr);
- reg &= ~routes[i].mask;
- writel_relaxed(reg, mmsys->regs + routes[i].addr);
- }
+ if (cur == routes[i].from_comp && next == routes[i].to_comp)
+ mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask, 0, NULL);
}
EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
-static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, u32 offset, u32 mask, u32 val)
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width, int height,
+ struct cmdq_pkt *cmdq_pkt)
{
- u32 tmp;
+ mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
+ ~0, height << 16 | width, cmdq_pkt);
+}
+EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
- tmp = readl_relaxed(mmsys->regs + offset);
- tmp = (tmp & ~mask) | val;
- writel_relaxed(tmp, mmsys->regs + offset);
+void mtk_mmsys_hdr_config(struct device *dev, int be_width, int be_height,
+ struct cmdq_pkt *cmdq_pkt)
+{
+ mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
+ be_height << 16 | be_width, cmdq_pkt);
}
+EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_config);
+
+void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
+ u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt)
+{
+ struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
+
+ mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx - 1) * 4, ~0,
+ alpha << 16 | alpha, cmdq_pkt);
+ mtk_mmsys_update_bits(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 + idx),
+ alpha_sel << (19 + idx), cmdq_pkt);
+ mtk_mmsys_update_bits(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
+ GENMASK(31, 16) | GENMASK(1, 0), biwidth << 16 | mode, cmdq_pkt);
+}
+EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
+
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+ struct cmdq_pkt *cmdq_pkt)
+{
+ mtk_mmsys_update_bits(dev_get_drvdata(dev), MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
+ BIT(4), channel_swap << 4, cmdq_pkt);
+}
+EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val)
{
@@ -146,20 +223,20 @@ void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val)
switch (val) {
case MTK_DPI_RGB888_SDR_CON:
mtk_mmsys_update_bits(mmsys, MT8186_MMSYS_DPI_OUTPUT_FORMAT,
- MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB888_SDR_CON);
+ MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB888_SDR_CON, NULL);
break;
case MTK_DPI_RGB565_SDR_CON:
mtk_mmsys_update_bits(mmsys, MT8186_MMSYS_DPI_OUTPUT_FORMAT,
- MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB565_SDR_CON);
+ MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB565_SDR_CON, NULL);
break;
case MTK_DPI_RGB565_DDR_CON:
mtk_mmsys_update_bits(mmsys, MT8186_MMSYS_DPI_OUTPUT_FORMAT,
- MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB565_DDR_CON);
+ MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB565_DDR_CON, NULL);
break;
case MTK_DPI_RGB888_DDR_CON:
default:
mtk_mmsys_update_bits(mmsys, MT8186_MMSYS_DPI_OUTPUT_FORMAT,
- MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB888_DDR_CON);
+ MT8186_DPI_FORMAT_MASK, MT8186_DPI_RGB888_DDR_CON, NULL);
break;
}
}
@@ -170,18 +247,19 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
{
struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
unsigned long flags;
+ u32 offset;
u32 reg;
- spin_lock_irqsave(&mmsys->lock, flags);
+ offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
+ id = id % MMSYS_SW_RESET_PER_REG;
+ reg = mmsys->data->sw0_rst_offset + offset;
- reg = readl_relaxed(mmsys->regs + mmsys->data->sw0_rst_offset);
+ spin_lock_irqsave(&mmsys->lock, flags);
if (assert)
- reg &= ~BIT(id);
+ mtk_mmsys_update_bits(mmsys, reg, BIT(id), 0, NULL);
else
- reg |= BIT(id);
-
- writel_relaxed(reg, mmsys->regs + mmsys->data->sw0_rst_offset);
+ mtk_mmsys_update_bits(mmsys, reg, BIT(id), BIT(id), NULL);
spin_unlock_irqrestore(&mmsys->lock, flags);
@@ -236,19 +314,28 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
return ret;
}
- spin_lock_init(&mmsys->lock);
+ mmsys->data = of_device_get_match_data(&pdev->dev);
- mmsys->rcdev.owner = THIS_MODULE;
- mmsys->rcdev.nr_resets = 32;
- mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
- mmsys->rcdev.of_node = pdev->dev.of_node;
- ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
- if (ret) {
- dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
- return ret;
+ if (mmsys->data->num_resets > 0) {
+ spin_lock_init(&mmsys->lock);
+
+ mmsys->rcdev.owner = THIS_MODULE;
+ mmsys->rcdev.nr_resets = mmsys->data->num_resets;
+ mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
+ mmsys->rcdev.of_node = pdev->dev.of_node;
+ ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
+ return ret;
+ }
}
- mmsys->data = of_device_get_match_data(&pdev->dev);
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+ ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
+ if (ret)
+ dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+#endif
+
platform_set_drvdata(pdev, mmsys);
clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
@@ -256,6 +343,9 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
if (IS_ERR(clks))
return PTR_ERR(clks);
+ if (mmsys->data->is_vppsys)
+ goto out_probe_done;
+
drm = platform_device_register_data(&pdev->dev, "mediatek-drm",
PLATFORM_DEVID_AUTO, NULL, 0);
if (IS_ERR(drm)) {
@@ -263,6 +353,7 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
return PTR_ERR(drm);
}
+out_probe_done:
return 0;
}
@@ -300,6 +391,10 @@ static const struct of_device_id of_match_mtk_mmsys[] = {
.data = &mt8186_mmsys_driver_data,
},
{
+ .compatible = "mediatek,mt8188-vdosys0",
+ .data = &mt8188_vdosys0_driver_data,
+ },
+ {
.compatible = "mediatek,mt8192-mmsys",
.data = &mt8192_mmsys_driver_data,
},
@@ -312,6 +407,18 @@ static const struct of_device_id of_match_mtk_mmsys[] = {
.data = &mt8195_vdosys0_driver_data,
},
{
+ .compatible = "mediatek,mt8195-vdosys1",
+ .data = &mt8195_vdosys1_driver_data,
+ },
+ {
+ .compatible = "mediatek,mt8195-vppsys0",
+ .data = &mt8195_vppsys0_driver_data,
+ },
+ {
+ .compatible = "mediatek,mt8195-vppsys1",
+ .data = &mt8195_vppsys1_driver_data,
+ },
+ {
.compatible = "mediatek,mt8365-mmsys",
.data = &mt8365_mmsys_driver_data,
},
@@ -326,4 +433,19 @@ static struct platform_driver mtk_mmsys_drv = {
.probe = mtk_mmsys_probe,
};
-builtin_platform_driver(mtk_mmsys_drv);
+static int __init mtk_mmsys_init(void)
+{
+ return platform_driver_register(&mtk_mmsys_drv);
+}
+
+static void __exit mtk_mmsys_exit(void)
+{
+ platform_driver_unregister(&mtk_mmsys_drv);
+}
+
+module_init(mtk_mmsys_init);
+module_exit(mtk_mmsys_exit);
+
+MODULE_AUTHOR("Yongqiang Niu <yongqiang.niu@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC MMSYS driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 77f37f8c715b..56f8cc3a97b7 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -91,6 +91,8 @@ struct mtk_mmsys_driver_data {
const struct mtk_mmsys_routes *routes;
const unsigned int num_routes;
const u16 sw0_rst_offset;
+ const u32 num_resets;
+ const bool is_vppsys;
};
/*
diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index c1a33d52038e..c5b1b42303ac 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -116,6 +116,21 @@
#define MT8173_MUTEX_MOD_DISP_PWM1 24
#define MT8173_MUTEX_MOD_DISP_OD 25
+#define MT8188_MUTEX_MOD_DISP_OVL0 0
+#define MT8188_MUTEX_MOD_DISP_WDMA0 1
+#define MT8188_MUTEX_MOD_DISP_RDMA0 2
+#define MT8188_MUTEX_MOD_DISP_COLOR0 3
+#define MT8188_MUTEX_MOD_DISP_CCORR0 4
+#define MT8188_MUTEX_MOD_DISP_AAL0 5
+#define MT8188_MUTEX_MOD_DISP_GAMMA0 6
+#define MT8188_MUTEX_MOD_DISP_DITHER0 7
+#define MT8188_MUTEX_MOD_DISP_DSI0 8
+#define MT8188_MUTEX_MOD_DISP_DSC_WRAP0_CORE0 9
+#define MT8188_MUTEX_MOD_DISP_VPP_MERGE 20
+#define MT8188_MUTEX_MOD_DISP_DP_INTF0 21
+#define MT8188_MUTEX_MOD_DISP_POSTMASK0 24
+#define MT8188_MUTEX_MOD2_DISP_PWM0 33
+
#define MT8195_MUTEX_MOD_DISP_OVL0 0
#define MT8195_MUTEX_MOD_DISP_WDMA0 1
#define MT8195_MUTEX_MOD_DISP_RDMA0 2
@@ -130,6 +145,24 @@
#define MT8195_MUTEX_MOD_DISP_DP_INTF0 21
#define MT8195_MUTEX_MOD_DISP_PWM0 27
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA0 0
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA1 1
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA2 2
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA3 3
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA4 4
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA5 5
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA6 6
+#define MT8195_MUTEX_MOD_DISP1_MDP_RDMA7 7
+#define MT8195_MUTEX_MOD_DISP1_VPP_MERGE0 8
+#define MT8195_MUTEX_MOD_DISP1_VPP_MERGE1 9
+#define MT8195_MUTEX_MOD_DISP1_VPP_MERGE2 10
+#define MT8195_MUTEX_MOD_DISP1_VPP_MERGE3 11
+#define MT8195_MUTEX_MOD_DISP1_VPP_MERGE4 12
+#define MT8195_MUTEX_MOD_DISP1_DISP_MIXER 18
+#define MT8195_MUTEX_MOD_DISP1_DPI0 25
+#define MT8195_MUTEX_MOD_DISP1_DPI1 26
+#define MT8195_MUTEX_MOD_DISP1_DP_INTF0 27
+
#define MT8365_MUTEX_MOD_DISP_OVL0 7
#define MT8365_MUTEX_MOD_DISP_OVL0_2L 8
#define MT8365_MUTEX_MOD_DISP_RDMA0 9
@@ -180,6 +213,8 @@
#define MT8167_MUTEX_SOF_DPI1 3
#define MT8183_MUTEX_SOF_DSI0 1
#define MT8183_MUTEX_SOF_DPI0 2
+#define MT8188_MUTEX_SOF_DSI0 1
+#define MT8188_MUTEX_SOF_DP_INTF0 3
#define MT8195_MUTEX_SOF_DSI0 1
#define MT8195_MUTEX_SOF_DSI1 2
#define MT8195_MUTEX_SOF_DP_INTF0 3
@@ -189,6 +224,8 @@
#define MT8183_MUTEX_EOF_DSI0 (MT8183_MUTEX_SOF_DSI0 << 6)
#define MT8183_MUTEX_EOF_DPI0 (MT8183_MUTEX_SOF_DPI0 << 6)
+#define MT8188_MUTEX_EOF_DSI0 (MT8188_MUTEX_SOF_DSI0 << 7)
+#define MT8188_MUTEX_EOF_DP_INTF0 (MT8188_MUTEX_SOF_DP_INTF0 << 7)
#define MT8195_MUTEX_EOF_DSI0 (MT8195_MUTEX_SOF_DSI0 << 7)
#define MT8195_MUTEX_EOF_DSI1 (MT8195_MUTEX_SOF_DSI1 << 7)
#define MT8195_MUTEX_EOF_DP_INTF0 (MT8195_MUTEX_SOF_DP_INTF0 << 7)
@@ -344,6 +381,23 @@ static const unsigned int mt8186_mdp_mutex_table_mod[MUTEX_MOD_IDX_MAX] = {
[MUTEX_MOD_IDX_MDP_COLOR0] = MT8186_MUTEX_MOD_MDP_COLOR0,
};
+static const unsigned int mt8188_mutex_mod[DDP_COMPONENT_ID_MAX] = {
+ [DDP_COMPONENT_OVL0] = MT8188_MUTEX_MOD_DISP_OVL0,
+ [DDP_COMPONENT_WDMA0] = MT8188_MUTEX_MOD_DISP_WDMA0,
+ [DDP_COMPONENT_RDMA0] = MT8188_MUTEX_MOD_DISP_RDMA0,
+ [DDP_COMPONENT_COLOR0] = MT8188_MUTEX_MOD_DISP_COLOR0,
+ [DDP_COMPONENT_CCORR] = MT8188_MUTEX_MOD_DISP_CCORR0,
+ [DDP_COMPONENT_AAL0] = MT8188_MUTEX_MOD_DISP_AAL0,
+ [DDP_COMPONENT_GAMMA] = MT8188_MUTEX_MOD_DISP_GAMMA0,
+ [DDP_COMPONENT_POSTMASK0] = MT8188_MUTEX_MOD_DISP_POSTMASK0,
+ [DDP_COMPONENT_DITHER0] = MT8188_MUTEX_MOD_DISP_DITHER0,
+ [DDP_COMPONENT_MERGE0] = MT8188_MUTEX_MOD_DISP_VPP_MERGE,
+ [DDP_COMPONENT_DSC0] = MT8188_MUTEX_MOD_DISP_DSC_WRAP0_CORE0,
+ [DDP_COMPONENT_DSI0] = MT8188_MUTEX_MOD_DISP_DSI0,
+ [DDP_COMPONENT_PWM0] = MT8188_MUTEX_MOD2_DISP_PWM0,
+ [DDP_COMPONENT_DP_INTF0] = MT8188_MUTEX_MOD_DISP_DP_INTF0,
+};
+
static const unsigned int mt8192_mutex_mod[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_AAL0] = MT8192_MUTEX_MOD_DISP_AAL0,
[DDP_COMPONENT_CCORR] = MT8192_MUTEX_MOD_DISP_CCORR0,
@@ -372,6 +426,21 @@ static const unsigned int mt8195_mutex_mod[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_DSI0] = MT8195_MUTEX_MOD_DISP_DSI0,
[DDP_COMPONENT_PWM0] = MT8195_MUTEX_MOD_DISP_PWM0,
[DDP_COMPONENT_DP_INTF0] = MT8195_MUTEX_MOD_DISP_DP_INTF0,
+ [DDP_COMPONENT_MDP_RDMA0] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA0,
+ [DDP_COMPONENT_MDP_RDMA1] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA1,
+ [DDP_COMPONENT_MDP_RDMA2] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA2,
+ [DDP_COMPONENT_MDP_RDMA3] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA3,
+ [DDP_COMPONENT_MDP_RDMA4] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA4,
+ [DDP_COMPONENT_MDP_RDMA5] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA5,
+ [DDP_COMPONENT_MDP_RDMA6] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA6,
+ [DDP_COMPONENT_MDP_RDMA7] = MT8195_MUTEX_MOD_DISP1_MDP_RDMA7,
+ [DDP_COMPONENT_MERGE1] = MT8195_MUTEX_MOD_DISP1_VPP_MERGE0,
+ [DDP_COMPONENT_MERGE2] = MT8195_MUTEX_MOD_DISP1_VPP_MERGE1,
+ [DDP_COMPONENT_MERGE3] = MT8195_MUTEX_MOD_DISP1_VPP_MERGE2,
+ [DDP_COMPONENT_MERGE4] = MT8195_MUTEX_MOD_DISP1_VPP_MERGE3,
+ [DDP_COMPONENT_ETHDR_MIXER] = MT8195_MUTEX_MOD_DISP1_DISP_MIXER,
+ [DDP_COMPONENT_MERGE5] = MT8195_MUTEX_MOD_DISP1_VPP_MERGE4,
+ [DDP_COMPONENT_DP_INTF1] = MT8195_MUTEX_MOD_DISP1_DP_INTF0,
};
static const unsigned int mt8365_mutex_mod[DDP_COMPONENT_ID_MAX] = {
@@ -435,6 +504,14 @@ static const unsigned int mt8186_mutex_sof[MUTEX_SOF_DSI3 + 1] = {
* but also detect the error at end of frame(EAEOF) when EOF signal
* arrives.
*/
+static const unsigned int mt8188_mutex_sof[DDP_MUTEX_SOF_MAX] = {
+ [MUTEX_SOF_SINGLE_MODE] = MUTEX_SOF_SINGLE_MODE,
+ [MUTEX_SOF_DSI0] =
+ MT8188_MUTEX_SOF_DSI0 | MT8188_MUTEX_EOF_DSI0,
+ [MUTEX_SOF_DP_INTF0] =
+ MT8188_MUTEX_SOF_DP_INTF0 | MT8188_MUTEX_EOF_DP_INTF0,
+};
+
static const unsigned int mt8195_mutex_sof[DDP_MUTEX_SOF_MAX] = {
[MUTEX_SOF_SINGLE_MODE] = MUTEX_SOF_SINGLE_MODE,
[MUTEX_SOF_DSI0] = MT8195_MUTEX_SOF_DSI0 | MT8195_MUTEX_EOF_DSI0,
@@ -505,6 +582,13 @@ static const struct mtk_mutex_data mt8186_mutex_driver_data = {
.mutex_sof_reg = MT8183_MUTEX0_SOF0,
};
+static const struct mtk_mutex_data mt8188_mutex_driver_data = {
+ .mutex_mod = mt8188_mutex_mod,
+ .mutex_sof = mt8188_mutex_sof,
+ .mutex_mod_reg = MT8183_MUTEX0_MOD0,
+ .mutex_sof_reg = MT8183_MUTEX0_SOF0,
+};
+
static const struct mtk_mutex_data mt8192_mutex_driver_data = {
.mutex_mod = mt8192_mutex_mod,
.mutex_sof = mt8183_mutex_sof,
@@ -602,6 +686,9 @@ void mtk_mutex_add_comp(struct mtk_mutex *mutex,
case DDP_COMPONENT_DP_INTF0:
sof_id = MUTEX_SOF_DP_INTF0;
break;
+ case DDP_COMPONENT_DP_INTF1:
+ sof_id = MUTEX_SOF_DP_INTF1;
+ break;
default:
if (mtx->data->mutex_mod[id] < 32) {
offset = DISP_REG_MUTEX_MOD(mtx->data->mutex_mod_reg,
@@ -642,6 +729,7 @@ void mtk_mutex_remove_comp(struct mtk_mutex *mutex,
case DDP_COMPONENT_DPI0:
case DDP_COMPONENT_DPI1:
case DDP_COMPONENT_DP_INTF0:
+ case DDP_COMPONENT_DP_INTF1:
writel_relaxed(MUTEX_SOF_SINGLE_MODE,
mtx->regs +
DISP_REG_MUTEX_SOF(mtx->data->mutex_sof_reg,
@@ -832,11 +920,6 @@ static int mtk_mutex_probe(struct platform_device *pdev)
return 0;
}
-static int mtk_mutex_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
static const struct of_device_id mutex_driver_dt_match[] = {
{ .compatible = "mediatek,mt2701-disp-mutex",
.data = &mt2701_mutex_driver_data},
@@ -854,6 +937,8 @@ static const struct of_device_id mutex_driver_dt_match[] = {
.data = &mt8186_mutex_driver_data},
{ .compatible = "mediatek,mt8186-mdp3-mutex",
.data = &mt8186_mdp_mutex_driver_data},
+ { .compatible = "mediatek,mt8188-disp-mutex",
+ .data = &mt8188_mutex_driver_data},
{ .compatible = "mediatek,mt8192-disp-mutex",
.data = &mt8192_mutex_driver_data},
{ .compatible = "mediatek,mt8195-disp-mutex",
@@ -866,7 +951,6 @@ MODULE_DEVICE_TABLE(of, mutex_driver_dt_match);
static struct platform_driver mtk_mutex_driver = {
.probe = mtk_mutex_probe,
- .remove = mtk_mutex_remove,
.driver = {
.name = "mediatek-mutex",
.owner = THIS_MODULE,
@@ -874,4 +958,19 @@ static struct platform_driver mtk_mutex_driver = {
},
};
-builtin_platform_driver(mtk_mutex_driver);
+static int __init mtk_mutex_init(void)
+{
+ return platform_driver_register(&mtk_mutex_driver);
+}
+
+static void __exit mtk_mutex_exit(void)
+{
+ platform_driver_unregister(&mtk_mutex_driver);
+}
+
+module_init(mtk_mutex_init);
+module_exit(mtk_mutex_exit);
+
+MODULE_AUTHOR("Yongqiang Niu <yongqiang.niu@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SoC MUTEX driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 474b272f9b02..354249cc1b12 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -21,6 +21,7 @@
#include "mt8173-pm-domains.h"
#include "mt8183-pm-domains.h"
#include "mt8186-pm-domains.h"
+#include "mt8188-pm-domains.h"
#include "mt8192-pm-domains.h"
#include "mt8195-pm-domains.h"
@@ -218,6 +219,10 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
if (ret)
goto err_reg;
+ if (pd->data->ext_buck_iso_offs && MTK_SCPD_CAPS(pd, MTK_SCPD_EXT_BUCK_ISO))
+ regmap_clear_bits(scpsys->base, pd->data->ext_buck_iso_offs,
+ pd->data->ext_buck_iso_mask);
+
/* subsys power on */
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_BIT);
regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_ON_2ND_BIT);
@@ -272,6 +277,10 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
if (ret < 0)
return ret;
+ if (pd->data->ext_buck_iso_offs && MTK_SCPD_CAPS(pd, MTK_SCPD_EXT_BUCK_ISO))
+ regmap_set_bits(scpsys->base, pd->data->ext_buck_iso_offs,
+ pd->data->ext_buck_iso_mask);
+
clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
/* subsys power off */
@@ -580,6 +589,10 @@ static const struct of_device_id scpsys_of_match[] = {
.data = &mt8186_scpsys_data,
},
{
+ .compatible = "mediatek,mt8188-power-controller",
+ .data = &mt8188_scpsys_data,
+ },
+ {
.compatible = "mediatek,mt8192-power-controller",
.data = &mt8192_scpsys_data,
},
diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
index 7d3c0c36316c..5ec53ee073c4 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.h
+++ b/drivers/soc/mediatek/mtk-pm-domains.h
@@ -10,6 +10,7 @@
#define MTK_SCPD_DOMAIN_SUPPLY BIT(4)
/* can't set MTK_SCPD_KEEP_DEFAULT_OFF at the same time */
#define MTK_SCPD_ALWAYS_ON BIT(5)
+#define MTK_SCPD_EXT_BUCK_ISO BIT(6)
#define MTK_SCPD_CAPS(_scpd, _x) ((_scpd)->data->caps & (_x))
#define SPM_VDE_PWR_CON 0x0210
@@ -81,6 +82,8 @@ struct scpsys_bus_prot_data {
* @ctl_offs: The offset for main power control register.
* @sram_pdn_bits: The mask for sram power control bits.
* @sram_pdn_ack_bits: The mask for sram power control acked bits.
+ * @ext_buck_iso_offs: The offset for external buck isolation
+ * @ext_buck_iso_mask: The mask for external buck isolation
* @caps: The flag for active wake-up action.
* @bp_infracfg: bus protection for infracfg subsystem
* @bp_smi: bus protection for smi subsystem
@@ -91,6 +94,8 @@ struct scpsys_domain_data {
int ctl_offs;
u32 sram_pdn_bits;
u32 sram_pdn_ack_bits;
+ int ext_buck_iso_offs;
+ u32 ext_buck_iso_mask;
u8 caps;
const struct scpsys_bus_prot_data bp_infracfg[SPM_MAX_BUS_PROT_DATA];
const struct scpsys_bus_prot_data bp_smi[SPM_MAX_BUS_PROT_DATA];
diff --git a/drivers/soc/mediatek/mtk-regulator-coupler.c b/drivers/soc/mediatek/mtk-regulator-coupler.c
new file mode 100644
index 000000000000..ad2ed42aa697
--- /dev/null
+++ b/drivers/soc/mediatek/mtk-regulator-coupler.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Voltage regulators coupler for MediaTek SoCs
+ *
+ * Copyright (C) 2022 Collabora, Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/suspend.h>
+
+#define to_mediatek_coupler(x) container_of(x, struct mediatek_regulator_coupler, coupler)
+
+struct mediatek_regulator_coupler {
+ struct regulator_coupler coupler;
+ struct regulator_dev *vsram_rdev;
+};
+
+/*
+ * We currently support only couples of not more than two vregs and
+ * modify the vsram voltage only when changing voltage of vgpu.
+ *
+ * This function is limited to the GPU<->SRAM voltages relationships.
+ */
+static int mediatek_regulator_balance_voltage(struct regulator_coupler *coupler,
+ struct regulator_dev *rdev,
+ suspend_state_t state)
+{
+ struct mediatek_regulator_coupler *mrc = to_mediatek_coupler(coupler);
+ int max_spread = rdev->constraints->max_spread[0];
+ int vsram_min_uV = mrc->vsram_rdev->constraints->min_uV;
+ int vsram_max_uV = mrc->vsram_rdev->constraints->max_uV;
+ int vsram_target_min_uV, vsram_target_max_uV;
+ int min_uV = 0;
+ int max_uV = INT_MAX;
+ int ret;
+
+ /*
+ * If the target device is on, setting the SRAM voltage directly
+ * is not supported as it scales through its coupled supply voltage.
+ *
+ * An exception is made in case the use_count is zero: this means
+ * that this is the first time we power up the SRAM regulator, which
+ * implies that the target device has yet to perform initialization
+ * and setting a voltage at that time is harmless.
+ */
+ if (rdev == mrc->vsram_rdev) {
+ if (rdev->use_count == 0)
+ return regulator_do_balance_voltage(rdev, state, true);
+
+ return -EPERM;
+ }
+
+ ret = regulator_check_consumers(rdev, &min_uV, &max_uV, state);
+ if (ret < 0)
+ return ret;
+
+ if (min_uV == 0) {
+ ret = regulator_get_voltage_rdev(rdev);
+ if (ret < 0)
+ return ret;
+ min_uV = ret;
+ }
+
+ ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * If we're asked to set a voltage less than VSRAM min_uV, set
+ * the minimum allowed voltage on VSRAM, as in this case it is
+ * safe to ignore the max_spread parameter.
+ */
+ vsram_target_min_uV = max(vsram_min_uV, min_uV + max_spread);
+ vsram_target_max_uV = min(vsram_max_uV, vsram_target_min_uV + max_spread);
+
+ /* Make sure we're not out of range */
+ vsram_target_min_uV = min(vsram_target_min_uV, vsram_max_uV);
+
+ pr_debug("Setting voltage %d-%duV on %s (minuV %d)\n",
+ vsram_target_min_uV, vsram_target_max_uV,
+ rdev_get_name(mrc->vsram_rdev), min_uV);
+
+ ret = regulator_set_voltage_rdev(mrc->vsram_rdev, vsram_target_min_uV,
+ vsram_target_max_uV, state);
+ if (ret)
+ return ret;
+
+ /* The sram voltage is now balanced: update the target vreg voltage */
+ return regulator_do_balance_voltage(rdev, state, true);
+}
+
+static int mediatek_regulator_attach(struct regulator_coupler *coupler,
+ struct regulator_dev *rdev)
+{
+ struct mediatek_regulator_coupler *mrc = to_mediatek_coupler(coupler);
+ const char *rdev_name = rdev_get_name(rdev);
+
+ /*
+ * If we're getting a coupling of more than two regulators here and
+ * this means that this is surely not a GPU<->SRAM couple: in that
+ * case, we may want to use another coupler implementation, if any,
+ * or the generic one: the regulator core will keep walking through
+ * the list of couplers when any .attach_regulator() cb returns 1.
+ */
+ if (rdev->coupling_desc.n_coupled > 2)
+ return 1;
+
+ if (strstr(rdev_name, "sram")) {
+ if (mrc->vsram_rdev)
+ return -EINVAL;
+ mrc->vsram_rdev = rdev;
+ } else if (!strstr(rdev_name, "vgpu") && !strstr(rdev_name, "Vgpu")) {
+ return 1;
+ }
+
+ return 0;
+}
+
+static int mediatek_regulator_detach(struct regulator_coupler *coupler,
+ struct regulator_dev *rdev)
+{
+ struct mediatek_regulator_coupler *mrc = to_mediatek_coupler(coupler);
+
+ if (rdev == mrc->vsram_rdev)
+ mrc->vsram_rdev = NULL;
+
+ return 0;
+}
+
+static struct mediatek_regulator_coupler mediatek_coupler = {
+ .coupler = {
+ .attach_regulator = mediatek_regulator_attach,
+ .detach_regulator = mediatek_regulator_detach,
+ .balance_voltage = mediatek_regulator_balance_voltage,
+ },
+};
+
+static int mediatek_regulator_coupler_init(void)
+{
+ if (!of_machine_is_compatible("mediatek,mt8183") &&
+ !of_machine_is_compatible("mediatek,mt8186") &&
+ !of_machine_is_compatible("mediatek,mt8192"))
+ return 0;
+
+ return regulator_coupler_register(&mediatek_coupler.coupler);
+}
+arch_initcall(mediatek_regulator_coupler_init);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("MediaTek Regulator Coupler driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index 0469c9dfeb04..f26eb2f637d5 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -138,6 +138,7 @@
static DEFINE_SPINLOCK(svs_lock);
+#ifdef CONFIG_DEBUG_FS
#define debug_fops_ro(name) \
static int svs_##name##_debug_open(struct inode *inode, \
struct file *filp) \
@@ -170,6 +171,7 @@ static DEFINE_SPINLOCK(svs_lock);
}
#define svs_dentry_data(name) {__stringify(name), &svs_##name##_debug_fops}
+#endif
/**
* enum svsb_phase - svs bank phase enumeration
@@ -311,15 +313,12 @@ static const u32 svs_regs_v2[] = {
/**
* struct svs_platform - svs platform control
- * @name: svs platform name
* @base: svs platform register base
* @dev: svs platform device
* @main_clk: main clock for svs bank
* @pbank: svs bank pointer needing to be protected by spin_lock section
* @banks: svs banks that svs platform supports
* @rst: svs platform reset control
- * @efuse_parsing: svs platform efuse parsing function pointer
- * @probe: svs platform probe function pointer
* @efuse_max: total number of svs efuse
* @tefuse_max: total number of thermal efuse
* @regs: svs platform registers map
@@ -328,15 +327,12 @@ static const u32 svs_regs_v2[] = {
* @tefuse: thermal efuse data received from NVMEM framework
*/
struct svs_platform {
- char *name;
void __iomem *base;
struct device *dev;
struct clk *main_clk;
struct svs_bank *pbank;
struct svs_bank *banks;
struct reset_control *rst;
- bool (*efuse_parsing)(struct svs_platform *svsp);
- int (*probe)(struct svs_platform *svsp);
size_t efuse_max;
size_t tefuse_max;
const u32 *regs;
@@ -628,6 +624,7 @@ unlock_mutex:
return ret;
}
+#ifdef CONFIG_DEBUG_FS
static int svs_dump_debug_show(struct seq_file *m, void *p)
{
struct svs_platform *svsp = (struct svs_platform *)m->private;
@@ -843,6 +840,7 @@ static int svs_create_debug_cmds(struct svs_platform *svsp)
return 0;
}
+#endif /* CONFIG_DEBUG_FS */
static u32 interpolate(u32 f0, u32 f1, u32 v0, u32 v1, u32 fx)
{
@@ -1324,7 +1322,7 @@ static int svs_init01(struct svs_platform *svsp)
svsb->pm_runtime_enabled_count++;
}
- ret = pm_runtime_get_sync(svsb->opp_dev);
+ ret = pm_runtime_resume_and_get(svsb->opp_dev);
if (ret < 0) {
dev_err(svsb->dev, "mtcmos on fail: %d\n", ret);
goto svs_init01_resume_cpuidle;
@@ -1461,6 +1459,7 @@ static int svs_init02(struct svs_platform *svsp)
{
struct svs_bank *svsb;
unsigned long flags, time_left;
+ int ret;
u32 idx;
for (idx = 0; idx < svsp->bank_max; idx++) {
@@ -1479,7 +1478,8 @@ static int svs_init02(struct svs_platform *svsp)
msecs_to_jiffies(5000));
if (!time_left) {
dev_err(svsb->dev, "init02 completion timeout\n");
- return -EBUSY;
+ ret = -EBUSY;
+ goto out_of_init02;
}
}
@@ -1497,12 +1497,30 @@ static int svs_init02(struct svs_platform *svsp)
if (svsb->type == SVSB_HIGH || svsb->type == SVSB_LOW) {
if (svs_sync_bank_volts_from_opp(svsb)) {
dev_err(svsb->dev, "sync volt fail\n");
- return -EPERM;
+ ret = -EPERM;
+ goto out_of_init02;
}
}
}
return 0;
+
+out_of_init02:
+ for (idx = 0; idx < svsp->bank_max; idx++) {
+ svsb = &svsp->banks[idx];
+
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+ svs_switch_bank(svsp);
+ svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
+ spin_unlock_irqrestore(&svs_lock, flags);
+
+ svsb->phase = SVSB_PHASE_ERROR;
+ svs_adjust_pm_opp_volts(svsb);
+ }
+
+ return ret;
}
static void svs_mon_mode(struct svs_platform *svsp)
@@ -1594,12 +1612,16 @@ static int svs_resume(struct device *dev)
ret = svs_init02(svsp);
if (ret)
- goto out_of_resume;
+ goto svs_resume_reset_assert;
svs_mon_mode(svsp);
return 0;
+svs_resume_reset_assert:
+ dev_err(svsp->dev, "assert reset: %d\n",
+ reset_control_assert(svsp->rst));
+
out_of_resume:
clk_disable_unprepare(svsp->main_clk);
return ret;
@@ -1899,26 +1921,27 @@ static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
o_slope_sign = (svsp->tefuse[0] >> 7) & BIT(0);
ts_id = (svsp->tefuse[1] >> 9) & BIT(0);
- o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0);
-
- if (adc_cali_en_t == 1) {
- if (!ts_id)
- o_slope = 0;
-
- if (adc_ge_t < 265 || adc_ge_t > 758 ||
- adc_oe_t < 265 || adc_oe_t > 758 ||
- o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 ||
- o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 ||
- o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 ||
- o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 ||
- o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 ||
- o_vtsabb < -8 || o_vtsabb > 484 ||
- degc_cali < 1 || degc_cali > 63) {
- dev_err(svsp->dev, "bad thermal efuse, no mon mode\n");
- goto remove_mt8183_svsb_mon_mode;
- }
+ if (!ts_id) {
+ o_slope = 1534;
} else {
- dev_err(svsp->dev, "no thermal efuse, no mon mode\n");
+ o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0);
+ if (!o_slope_sign)
+ o_slope = 1534 + o_slope * 10;
+ else
+ o_slope = 1534 - o_slope * 10;
+ }
+
+ if (adc_cali_en_t == 0 ||
+ adc_ge_t < 265 || adc_ge_t > 758 ||
+ adc_oe_t < 265 || adc_oe_t > 758 ||
+ o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 ||
+ o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 ||
+ o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 ||
+ o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 ||
+ o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 ||
+ o_vtsabb < -8 || o_vtsabb > 484 ||
+ degc_cali < 1 || degc_cali > 63) {
+ dev_err(svsp->dev, "bad thermal efuse, no mon mode\n");
goto remove_mt8183_svsb_mon_mode;
}
@@ -1937,11 +1960,7 @@ static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
x_roomt[i] = (((format[i] * 10000) / 4096) * 10000) / gain;
temp0 = (10000 * 100000 / gain) * 15 / 18;
-
- if (!o_slope_sign)
- mts = (temp0 * 10) / (1534 + o_slope * 10);
- else
- mts = (temp0 * 10) / (1534 - o_slope * 10);
+ mts = (temp0 * 10) / o_slope;
for (idx = 0; idx < svsp->bank_max; idx++) {
svsb = &svsp->banks[idx];
@@ -1968,11 +1987,7 @@ static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
temp0 = (degc_cali * 10 / 2);
temp1 = ((10000 * 100000 / 4096 / gain) *
oe + tb_roomt * 10) * 15 / 18;
-
- if (!o_slope_sign)
- temp2 = temp1 * 100 / (1534 + o_slope * 10);
- else
- temp2 = temp1 * 100 / (1534 - o_slope * 10);
+ temp2 = temp1 * 100 / o_slope;
svsb->bts = (temp0 + temp2 - 250) * 4 / 10;
}
@@ -2011,7 +2026,7 @@ static bool svs_is_efuse_data_correct(struct svs_platform *svsp)
svsp->efuse_max /= sizeof(u32);
nvmem_cell_put(cell);
- return svsp->efuse_parsing(svsp);
+ return true;
}
static struct device *svs_get_subsys_device(struct svs_platform *svsp,
@@ -2326,50 +2341,38 @@ static const struct of_device_id svs_of_match[] = {
/* Sentinel */
},
};
+MODULE_DEVICE_TABLE(of, svs_of_match);
-static struct svs_platform *svs_platform_probe(struct platform_device *pdev)
+static int svs_probe(struct platform_device *pdev)
{
struct svs_platform *svsp;
const struct svs_platform_data *svsp_data;
- int ret;
+ int ret, svsp_irq;
svsp_data = of_device_get_match_data(&pdev->dev);
- if (!svsp_data) {
- dev_err(&pdev->dev, "no svs platform data?\n");
- return ERR_PTR(-EPERM);
- }
svsp = devm_kzalloc(&pdev->dev, sizeof(*svsp), GFP_KERNEL);
if (!svsp)
- return ERR_PTR(-ENOMEM);
+ return -ENOMEM;
svsp->dev = &pdev->dev;
- svsp->name = svsp_data->name;
svsp->banks = svsp_data->banks;
- svsp->efuse_parsing = svsp_data->efuse_parsing;
- svsp->probe = svsp_data->probe;
svsp->regs = svsp_data->regs;
svsp->bank_max = svsp_data->bank_max;
- ret = svsp->probe(svsp);
+ ret = svsp_data->probe(svsp);
if (ret)
- return ERR_PTR(ret);
-
- return svsp;
-}
-
-static int svs_probe(struct platform_device *pdev)
-{
- struct svs_platform *svsp;
- int svsp_irq, ret;
-
- svsp = svs_platform_probe(pdev);
- if (IS_ERR(svsp))
- return PTR_ERR(svsp);
+ return ret;
if (!svs_is_efuse_data_correct(svsp)) {
dev_notice(svsp->dev, "efuse data isn't correct\n");
ret = -EPERM;
+ goto svs_probe_free_efuse;
+ }
+
+ if (!svsp_data->efuse_parsing(svsp)) {
+ dev_err(svsp->dev, "efuse data parsing failed\n");
+ ret = -EPERM;
goto svs_probe_free_resource;
}
@@ -2385,14 +2388,6 @@ static int svs_probe(struct platform_device *pdev)
goto svs_probe_free_resource;
}
- ret = devm_request_threaded_irq(svsp->dev, svsp_irq, NULL, svs_isr,
- IRQF_ONESHOT, svsp->name, svsp);
- if (ret) {
- dev_err(svsp->dev, "register irq(%d) failed: %d\n",
- svsp_irq, ret);
- goto svs_probe_free_resource;
- }
-
svsp->main_clk = devm_clk_get(svsp->dev, "main");
if (IS_ERR(svsp->main_clk)) {
dev_err(svsp->dev, "failed to get clock: %ld\n",
@@ -2414,17 +2409,27 @@ static int svs_probe(struct platform_device *pdev)
goto svs_probe_clk_disable;
}
+ ret = devm_request_threaded_irq(svsp->dev, svsp_irq, NULL, svs_isr,
+ IRQF_ONESHOT, svsp_data->name, svsp);
+ if (ret) {
+ dev_err(svsp->dev, "register irq(%d) failed: %d\n",
+ svsp_irq, ret);
+ goto svs_probe_iounmap;
+ }
+
ret = svs_start(svsp);
if (ret) {
dev_err(svsp->dev, "svs start fail: %d\n", ret);
goto svs_probe_iounmap;
}
+#ifdef CONFIG_DEBUG_FS
ret = svs_create_debug_cmds(svsp);
if (ret) {
dev_err(svsp->dev, "svs create debug cmds fail: %d\n", ret);
goto svs_probe_iounmap;
}
+#endif
return 0;
@@ -2435,11 +2440,13 @@ svs_probe_clk_disable:
clk_disable_unprepare(svsp->main_clk);
svs_probe_free_resource:
- if (!IS_ERR_OR_NULL(svsp->efuse))
- kfree(svsp->efuse);
if (!IS_ERR_OR_NULL(svsp->tefuse))
kfree(svsp->tefuse);
+svs_probe_free_efuse:
+ if (!IS_ERR_OR_NULL(svsp->efuse))
+ kfree(svsp->efuse);
+
return ret;
}
diff --git a/drivers/soc/nuvoton/Kconfig b/drivers/soc/nuvoton/Kconfig
new file mode 100644
index 000000000000..df46182088ec
--- /dev/null
+++ b/drivers/soc/nuvoton/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+menuconfig WPCM450_SOC
+ tristate "Nuvoton WPCM450 SoC driver"
+ default y if ARCH_WPCM450
+ select SOC_BUS
+ help
+ Say Y here to compile the SoC information driver for Nuvoton
+ WPCM450 SoCs.
+
+ This driver provides information such as the SoC model and
+ revision.
diff --git a/drivers/soc/nuvoton/Makefile b/drivers/soc/nuvoton/Makefile
new file mode 100644
index 000000000000..e30317b4e829
--- /dev/null
+++ b/drivers/soc/nuvoton/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_WPCM450_SOC) += wpcm450-soc.o
diff --git a/drivers/soc/nuvoton/wpcm450-soc.c b/drivers/soc/nuvoton/wpcm450-soc.c
new file mode 100644
index 000000000000..c5e0d11c383b
--- /dev/null
+++ b/drivers/soc/nuvoton/wpcm450-soc.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton WPCM450 SoC Identification
+ *
+ * Copyright (C) 2022 Jonathan Neuschäfer
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#define GCR_PDID 0
+#define PDID_CHIP(x) ((x) & 0x00ffffff)
+#define CHIP_WPCM450 0x926450
+#define PDID_REV(x) ((x) >> 24)
+
+struct revision {
+ u8 number;
+ const char *name;
+};
+
+static const struct revision revisions[] __initconst = {
+ { 0x00, "Z1" },
+ { 0x03, "Z2" },
+ { 0x04, "Z21" },
+ { 0x08, "A1" },
+ { 0x09, "A2" },
+ { 0x0a, "A3" },
+ {}
+};
+
+static const char * __init get_revision(unsigned int rev)
+{
+ int i;
+
+ for (i = 0; revisions[i].name; i++)
+ if (revisions[i].number == rev)
+ return revisions[i].name;
+ return NULL;
+}
+
+static struct soc_device_attribute *wpcm450_attr;
+static struct soc_device *wpcm450_soc;
+
+static int __init wpcm450_soc_init(void)
+{
+ struct soc_device_attribute *attr;
+ struct soc_device *soc;
+ const char *revision;
+ struct regmap *gcr;
+ u32 pdid;
+ int ret;
+
+ if (!of_machine_is_compatible("nuvoton,wpcm450"))
+ return 0;
+
+ gcr = syscon_regmap_lookup_by_compatible("nuvoton,wpcm450-gcr");
+ if (IS_ERR(gcr))
+ return PTR_ERR(gcr);
+ ret = regmap_read(gcr, GCR_PDID, &pdid);
+ if (ret)
+ return ret;
+
+ if (PDID_CHIP(pdid) != CHIP_WPCM450) {
+ pr_warn("Unknown chip ID in GCR.PDID: 0x%06x\n", PDID_CHIP(pdid));
+ return -ENODEV;
+ }
+
+ revision = get_revision(PDID_REV(pdid));
+ if (!revision) {
+ pr_warn("Unknown chip revision in GCR.PDID: 0x%02x\n", PDID_REV(pdid));
+ return -ENODEV;
+ }
+
+ attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+ if (!attr)
+ return -ENOMEM;
+
+ attr->family = "Nuvoton NPCM";
+ attr->soc_id = "WPCM450";
+ attr->revision = revision;
+ soc = soc_device_register(attr);
+ if (IS_ERR(soc)) {
+ kfree(attr);
+ pr_warn("Could not register SoC device\n");
+ return PTR_ERR(soc);
+ }
+
+ wpcm450_soc = soc;
+ wpcm450_attr = attr;
+ return 0;
+}
+module_init(wpcm450_soc_init);
+
+static void __exit wpcm450_soc_exit(void)
+{
+ if (wpcm450_soc) {
+ soc_device_unregister(wpcm450_soc);
+ wpcm450_soc = NULL;
+ kfree(wpcm450_attr);
+ }
+}
+module_exit(wpcm450_soc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonathan Neuschäfer");
+MODULE_DESCRIPTION("Nuvoton WPCM450 SoC Identification driver");
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index ae504c43d9e7..a8f283086a21 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -91,11 +91,38 @@ config QCOM_OCMEM
config QCOM_PDR_HELPERS
tristate
select QCOM_QMI_HELPERS
+ depends on NET
+
+config QCOM_PMIC_GLINK
+ tristate "Qualcomm PMIC GLINK driver"
+ depends on RPMSG
+ depends on TYPEC
+ depends on DRM
+ depends on NET
+ depends on OF
+ select AUXILIARY_BUS
+ select QCOM_PDR_HELPERS
+ help
+ The Qualcomm PMIC GLINK driver provides access, over GLINK, to the
+ USB and battery firmware running on one of the coprocessors in
+ several modern Qualcomm platforms.
+
+ Say yes here to support USB-C and battery status on modern Qualcomm
+ platforms.
config QCOM_QMI_HELPERS
tristate
depends on NET
+config QCOM_RAMP_CTRL
+ tristate "Qualcomm Ramp Controller driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ The Ramp Controller is used to program the sequence ID for pulse
+ swallowing, enable sequence and link sequence IDs for the CPU
+ cores on some Qualcomm SoCs.
+ Say y here to enable support for the ramp controller.
+
config QCOM_RMTFS_MEM
tristate "Qualcomm Remote Filesystem memory driver"
depends on ARCH_QCOM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index d66604aff2b0..6e88da899f60 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -8,8 +8,11 @@ obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
obj-$(CONFIG_QCOM_OCMEM) += ocmem.o
obj-$(CONFIG_QCOM_PDR_HELPERS) += pdr_interface.o
+obj-$(CONFIG_QCOM_PMIC_GLINK) += pmic_glink.o
+obj-$(CONFIG_QCOM_PMIC_GLINK) += pmic_glink_altmode.o
obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o
qmi_helpers-y += qmi_encdec.o qmi_interface.o
+obj-$(CONFIG_QCOM_RAMP_CTRL) += ramp_controller.o
obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_mem.o
obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o
qcom_rpmh-y += rpmh-rsc.o
diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index 3f11554df2f3..33dd8c315eb7 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -12,7 +12,7 @@
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/soc/qcom/mdt_loader.h>
diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
index c92d26b73e6f..199fe9872035 100644
--- a/drivers/soc/qcom/ocmem.c
+++ b/drivers/soc/qcom/ocmem.c
@@ -16,7 +16,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/types.h>
diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
new file mode 100644
index 000000000000..bb3fb57abcc6
--- /dev/null
+++ b/drivers/soc/qcom/pmic_glink.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Ltd
+ */
+#include <linux/auxiliary_bus.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rpmsg.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/pdr.h>
+#include <linux/soc/qcom/pmic_glink.h>
+
+struct pmic_glink {
+ struct device *dev;
+ struct pdr_handle *pdr;
+
+ struct rpmsg_endpoint *ept;
+
+ struct auxiliary_device altmode_aux;
+ struct auxiliary_device ps_aux;
+ struct auxiliary_device ucsi_aux;
+
+ /* serializing client_state and pdr_state updates */
+ struct mutex state_lock;
+ unsigned int client_state;
+ unsigned int pdr_state;
+
+ /* serializing clients list updates */
+ struct mutex client_lock;
+ struct list_head clients;
+};
+
+static struct pmic_glink *__pmic_glink;
+static DEFINE_MUTEX(__pmic_glink_lock);
+
+struct pmic_glink_client {
+ struct list_head node;
+
+ struct pmic_glink *pg;
+ unsigned int id;
+
+ void (*cb)(const void *data, size_t len, void *priv);
+ void (*pdr_notify)(void *priv, int state);
+ void *priv;
+};
+
+static void _devm_pmic_glink_release_client(struct device *dev, void *res)
+{
+ struct pmic_glink_client *client = (struct pmic_glink_client *)res;
+ struct pmic_glink *pg = client->pg;
+
+ mutex_lock(&pg->client_lock);
+ list_del(&client->node);
+ mutex_unlock(&pg->client_lock);
+}
+
+struct pmic_glink_client *devm_pmic_glink_register_client(struct device *dev,
+ unsigned int id,
+ void (*cb)(const void *, size_t, void *),
+ void (*pdr)(void *, int),
+ void *priv)
+{
+ struct pmic_glink_client *client;
+ struct pmic_glink *pg = dev_get_drvdata(dev->parent);
+
+ client = devres_alloc(_devm_pmic_glink_release_client, sizeof(*client), GFP_KERNEL);
+ if (!client)
+ return ERR_PTR(-ENOMEM);
+
+ client->pg = pg;
+ client->id = id;
+ client->cb = cb;
+ client->pdr_notify = pdr;
+ client->priv = priv;
+
+ mutex_lock(&pg->client_lock);
+ list_add(&client->node, &pg->clients);
+ mutex_unlock(&pg->client_lock);
+
+ devres_add(dev, client);
+
+ return client;
+}
+EXPORT_SYMBOL_GPL(devm_pmic_glink_register_client);
+
+int pmic_glink_send(struct pmic_glink_client *client, void *data, size_t len)
+{
+ struct pmic_glink *pg = client->pg;
+
+ return rpmsg_send(pg->ept, data, len);
+}
+EXPORT_SYMBOL_GPL(pmic_glink_send);
+
+static int pmic_glink_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
+ int len, void *priv, u32 addr)
+{
+ struct pmic_glink_client *client;
+ struct pmic_glink_hdr *hdr;
+ struct pmic_glink *pg = dev_get_drvdata(&rpdev->dev);
+
+ if (len < sizeof(*hdr)) {
+ dev_warn(pg->dev, "ignoring truncated message\n");
+ return 0;
+ }
+
+ hdr = data;
+
+ list_for_each_entry(client, &pg->clients, node) {
+ if (client->id == le32_to_cpu(hdr->owner))
+ client->cb(data, len, client->priv);
+ }
+
+ return 0;
+}
+
+static void pmic_glink_aux_release(struct device *dev) {}
+
+static int pmic_glink_add_aux_device(struct pmic_glink *pg,
+ struct auxiliary_device *aux,
+ const char *name)
+{
+ struct device *parent = pg->dev;
+ int ret;
+
+ aux->name = name;
+ aux->dev.parent = parent;
+ aux->dev.release = pmic_glink_aux_release;
+ device_set_of_node_from_dev(&aux->dev, parent);
+ ret = auxiliary_device_init(aux);
+ if (ret)
+ return ret;
+
+ ret = auxiliary_device_add(aux);
+ if (ret)
+ auxiliary_device_uninit(aux);
+
+ return ret;
+}
+
+static void pmic_glink_del_aux_device(struct pmic_glink *pg,
+ struct auxiliary_device *aux)
+{
+ auxiliary_device_delete(aux);
+ auxiliary_device_uninit(aux);
+}
+
+static void pmic_glink_state_notify_clients(struct pmic_glink *pg)
+{
+ struct pmic_glink_client *client;
+ unsigned int new_state = pg->client_state;
+
+ if (pg->client_state != SERVREG_SERVICE_STATE_UP) {
+ if (pg->pdr_state == SERVREG_SERVICE_STATE_UP && pg->ept)
+ new_state = SERVREG_SERVICE_STATE_UP;
+ } else {
+ if (pg->pdr_state == SERVREG_SERVICE_STATE_UP && pg->ept)
+ new_state = SERVREG_SERVICE_STATE_DOWN;
+ }
+
+ if (new_state != pg->client_state) {
+ list_for_each_entry(client, &pg->clients, node)
+ client->pdr_notify(client->priv, new_state);
+ pg->client_state = new_state;
+ }
+}
+
+static void pmic_glink_pdr_callback(int state, char *svc_path, void *priv)
+{
+ struct pmic_glink *pg = priv;
+
+ mutex_lock(&pg->state_lock);
+ pg->pdr_state = state;
+
+ pmic_glink_state_notify_clients(pg);
+ mutex_unlock(&pg->state_lock);
+}
+
+static int pmic_glink_rpmsg_probe(struct rpmsg_device *rpdev)
+{
+ struct pmic_glink *pg = __pmic_glink;
+ int ret = 0;
+
+ mutex_lock(&__pmic_glink_lock);
+ if (!pg) {
+ ret = dev_err_probe(&rpdev->dev, -ENODEV, "no pmic_glink device to attach to\n");
+ goto out_unlock;
+ }
+
+ dev_set_drvdata(&rpdev->dev, pg);
+
+ mutex_lock(&pg->state_lock);
+ pg->ept = rpdev->ept;
+ pmic_glink_state_notify_clients(pg);
+ mutex_unlock(&pg->state_lock);
+
+out_unlock:
+ mutex_unlock(&__pmic_glink_lock);
+ return ret;
+}
+
+static void pmic_glink_rpmsg_remove(struct rpmsg_device *rpdev)
+{
+ struct pmic_glink *pg;
+
+ mutex_lock(&__pmic_glink_lock);
+ pg = __pmic_glink;
+ if (!pg)
+ goto out_unlock;
+
+ mutex_lock(&pg->state_lock);
+ pg->ept = NULL;
+ pmic_glink_state_notify_clients(pg);
+ mutex_unlock(&pg->state_lock);
+out_unlock:
+ mutex_unlock(&__pmic_glink_lock);
+}
+
+static const struct rpmsg_device_id pmic_glink_rpmsg_id_match[] = {
+ { "PMIC_RTR_ADSP_APPS" },
+ {}
+};
+
+static struct rpmsg_driver pmic_glink_rpmsg_driver = {
+ .probe = pmic_glink_rpmsg_probe,
+ .remove = pmic_glink_rpmsg_remove,
+ .callback = pmic_glink_rpmsg_callback,
+ .id_table = pmic_glink_rpmsg_id_match,
+ .drv = {
+ .name = "qcom_pmic_glink_rpmsg",
+ },
+};
+
+static int pmic_glink_probe(struct platform_device *pdev)
+{
+ struct pdr_service *service;
+ struct pmic_glink *pg;
+ int ret;
+
+ pg = devm_kzalloc(&pdev->dev, sizeof(*pg), GFP_KERNEL);
+ if (!pg)
+ return -ENOMEM;
+
+ dev_set_drvdata(&pdev->dev, pg);
+
+ pg->dev = &pdev->dev;
+
+ INIT_LIST_HEAD(&pg->clients);
+ mutex_init(&pg->client_lock);
+ mutex_init(&pg->state_lock);
+
+ ret = pmic_glink_add_aux_device(pg, &pg->altmode_aux, "altmode");
+ if (ret)
+ return ret;
+ ret = pmic_glink_add_aux_device(pg, &pg->ps_aux, "power-supply");
+ if (ret)
+ goto out_release_altmode_aux;
+
+ pg->pdr = pdr_handle_alloc(pmic_glink_pdr_callback, pg);
+ if (IS_ERR(pg->pdr)) {
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(pg->pdr), "failed to initialize pdr\n");
+ goto out_release_aux_devices;
+ }
+
+ service = pdr_add_lookup(pg->pdr, "tms/servreg", "msm/adsp/charger_pd");
+ if (IS_ERR(service)) {
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(service),
+ "failed adding pdr lookup for charger_pd\n");
+ goto out_release_pdr_handle;
+ }
+
+ mutex_lock(&__pmic_glink_lock);
+ __pmic_glink = pg;
+ mutex_unlock(&__pmic_glink_lock);
+
+ return 0;
+
+out_release_pdr_handle:
+ pdr_handle_release(pg->pdr);
+out_release_aux_devices:
+ pmic_glink_del_aux_device(pg, &pg->ps_aux);
+out_release_altmode_aux:
+ pmic_glink_del_aux_device(pg, &pg->altmode_aux);
+
+ return ret;
+}
+
+static int pmic_glink_remove(struct platform_device *pdev)
+{
+ struct pmic_glink *pg = dev_get_drvdata(&pdev->dev);
+
+ pdr_handle_release(pg->pdr);
+
+ pmic_glink_del_aux_device(pg, &pg->ps_aux);
+ pmic_glink_del_aux_device(pg, &pg->altmode_aux);
+
+ mutex_lock(&__pmic_glink_lock);
+ __pmic_glink = NULL;
+ mutex_unlock(&__pmic_glink_lock);
+
+ return 0;
+}
+
+static const struct of_device_id pmic_glink_of_match[] = {
+ { .compatible = "qcom,pmic-glink", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pmic_glink_of_match);
+
+static struct platform_driver pmic_glink_driver = {
+ .probe = pmic_glink_probe,
+ .remove = pmic_glink_remove,
+ .driver = {
+ .name = "qcom_pmic_glink",
+ .of_match_table = pmic_glink_of_match,
+ },
+};
+
+static int pmic_glink_init(void)
+{
+ platform_driver_register(&pmic_glink_driver);
+ register_rpmsg_driver(&pmic_glink_rpmsg_driver);
+
+ return 0;
+};
+module_init(pmic_glink_init);
+
+static void pmic_glink_exit(void)
+{
+ unregister_rpmsg_driver(&pmic_glink_rpmsg_driver);
+ platform_driver_unregister(&pmic_glink_driver);
+};
+module_exit(pmic_glink_exit);
+
+MODULE_DESCRIPTION("Qualcomm PMIC GLINK driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c
new file mode 100644
index 000000000000..4d7895bdeaf2
--- /dev/null
+++ b/drivers/soc/qcom/pmic_glink_altmode.c
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Ltd
+ */
+#include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/soc/qcom/pdr.h>
+#include <drm/drm_bridge.h>
+
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+#include <linux/soc/qcom/pmic_glink.h>
+
+#define PMIC_GLINK_MAX_PORTS 2
+
+#define USBC_SC8180X_NOTIFY_IND 0x13
+#define USBC_CMD_WRITE_REQ 0x15
+#define USBC_NOTIFY_IND 0x16
+
+#define ALTMODE_PAN_EN 0x10
+#define ALTMODE_PAN_ACK 0x11
+
+struct usbc_write_req {
+ struct pmic_glink_hdr hdr;
+ __le32 cmd;
+ __le32 arg;
+ __le32 reserved;
+};
+
+#define NOTIFY_PAYLOAD_SIZE 16
+struct usbc_notify {
+ struct pmic_glink_hdr hdr;
+ char payload[NOTIFY_PAYLOAD_SIZE];
+ u32 reserved;
+};
+
+struct usbc_sc8180x_notify {
+ struct pmic_glink_hdr hdr;
+ __le32 notification;
+ __le32 reserved[2];
+};
+
+enum pmic_glink_altmode_pin_assignment {
+ DPAM_HPD_OUT,
+ DPAM_HPD_A,
+ DPAM_HPD_B,
+ DPAM_HPD_C,
+ DPAM_HPD_D,
+ DPAM_HPD_E,
+ DPAM_HPD_F,
+};
+
+struct pmic_glink_altmode;
+
+#define work_to_altmode_port(w) container_of((w), struct pmic_glink_altmode_port, work)
+
+struct pmic_glink_altmode_port {
+ struct pmic_glink_altmode *altmode;
+ unsigned int index;
+
+ struct typec_switch *typec_switch;
+ struct typec_mux *typec_mux;
+ struct typec_mux_state state;
+ struct typec_altmode dp_alt;
+
+ struct work_struct work;
+
+ struct drm_bridge bridge;
+
+ enum typec_orientation orientation;
+ u16 svid;
+ u8 dp_data;
+ u8 mode;
+ u8 hpd_state;
+ u8 hpd_irq;
+};
+
+#define work_to_altmode(w) container_of((w), struct pmic_glink_altmode, enable_work)
+
+struct pmic_glink_altmode {
+ struct device *dev;
+
+ unsigned int owner_id;
+
+ /* To synchronize WRITE_REQ acks */
+ struct mutex lock;
+
+ struct completion pan_ack;
+ struct pmic_glink_client *client;
+
+ struct work_struct enable_work;
+
+ struct pmic_glink_altmode_port ports[PMIC_GLINK_MAX_PORTS];
+};
+
+static int pmic_glink_altmode_request(struct pmic_glink_altmode *altmode, u32 cmd, u32 arg)
+{
+ struct usbc_write_req req = {};
+ unsigned long left;
+ int ret;
+
+ /*
+ * The USBC_CMD_WRITE_REQ ack doesn't identify the request, so wait for
+ * one ack at a time.
+ */
+ mutex_lock(&altmode->lock);
+
+ req.hdr.owner = cpu_to_le32(altmode->owner_id);
+ req.hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP);
+ req.hdr.opcode = cpu_to_le32(USBC_CMD_WRITE_REQ);
+ req.cmd = cpu_to_le32(cmd);
+ req.arg = cpu_to_le32(arg);
+
+ ret = pmic_glink_send(altmode->client, &req, sizeof(req));
+ if (ret) {
+ dev_err(altmode->dev, "failed to send altmode request: %#x (%d)\n", cmd, ret);
+ goto out_unlock;
+ }
+
+ left = wait_for_completion_timeout(&altmode->pan_ack, 5 * HZ);
+ if (!left) {
+ dev_err(altmode->dev, "timeout waiting for altmode request ack for: %#x\n", cmd);
+ ret = -ETIMEDOUT;
+ }
+
+out_unlock:
+ mutex_unlock(&altmode->lock);
+ return ret;
+}
+
+static void pmic_glink_altmode_enable_dp(struct pmic_glink_altmode *altmode,
+ struct pmic_glink_altmode_port *port,
+ u8 mode, bool hpd_state,
+ bool hpd_irq)
+{
+ struct typec_displayport_data dp_data = {};
+ int ret;
+
+ dp_data.status = DP_STATUS_ENABLED;
+ if (hpd_state)
+ dp_data.status |= DP_STATUS_HPD_STATE;
+ if (hpd_irq)
+ dp_data.status |= DP_STATUS_IRQ_HPD;
+ dp_data.conf = DP_CONF_SET_PIN_ASSIGN(mode);
+
+ port->state.alt = &port->dp_alt;
+ port->state.data = &dp_data;
+ port->state.mode = TYPEC_MODAL_STATE(mode);
+
+ ret = typec_mux_set(port->typec_mux, &port->state);
+ if (ret)
+ dev_err(altmode->dev, "failed to switch mux to DP\n");
+}
+
+static void pmic_glink_altmode_enable_usb(struct pmic_glink_altmode *altmode,
+ struct pmic_glink_altmode_port *port)
+{
+ int ret;
+
+ port->state.alt = NULL;
+ port->state.data = NULL;
+ port->state.mode = TYPEC_STATE_USB;
+
+ ret = typec_mux_set(port->typec_mux, &port->state);
+ if (ret)
+ dev_err(altmode->dev, "failed to switch mux to USB\n");
+}
+
+static void pmic_glink_altmode_worker(struct work_struct *work)
+{
+ struct pmic_glink_altmode_port *alt_port = work_to_altmode_port(work);
+ struct pmic_glink_altmode *altmode = alt_port->altmode;
+
+ typec_switch_set(alt_port->typec_switch, alt_port->orientation);
+
+ if (alt_port->svid == USB_TYPEC_DP_SID)
+ pmic_glink_altmode_enable_dp(altmode, alt_port, alt_port->mode,
+ alt_port->hpd_state, alt_port->hpd_irq);
+ else
+ pmic_glink_altmode_enable_usb(altmode, alt_port);
+
+ if (alt_port->hpd_state)
+ drm_bridge_hpd_notify(&alt_port->bridge, connector_status_connected);
+ else
+ drm_bridge_hpd_notify(&alt_port->bridge, connector_status_disconnected);
+
+ pmic_glink_altmode_request(altmode, ALTMODE_PAN_ACK, alt_port->index);
+};
+
+static enum typec_orientation pmic_glink_altmode_orientation(unsigned int orientation)
+{
+ if (orientation == 0)
+ return TYPEC_ORIENTATION_NORMAL;
+ else if (orientation == 1)
+ return TYPEC_ORIENTATION_REVERSE;
+ else
+ return TYPEC_ORIENTATION_NONE;
+}
+
+#define SC8180X_PORT_MASK 0x000000ff
+#define SC8180X_ORIENTATION_MASK 0x0000ff00
+#define SC8180X_MUX_MASK 0x00ff0000
+#define SC8180X_MODE_MASK 0x3f000000
+#define SC8180X_HPD_STATE_MASK 0x40000000
+#define SC8180X_HPD_IRQ_MASK 0x80000000
+
+static void pmic_glink_altmode_sc8180xp_notify(struct pmic_glink_altmode *altmode,
+ const void *data, size_t len)
+{
+ struct pmic_glink_altmode_port *alt_port;
+ const struct usbc_sc8180x_notify *msg;
+ u32 notification;
+ u8 orientation;
+ u8 hpd_state;
+ u8 hpd_irq;
+ u16 svid;
+ u8 port;
+ u8 mode;
+ u8 mux;
+
+ if (len != sizeof(*msg)) {
+ dev_warn(altmode->dev, "invalid length of USBC_NOTIFY indication: %zd\n", len);
+ return;
+ }
+
+ msg = data;
+ notification = le32_to_cpu(msg->notification);
+ port = FIELD_GET(SC8180X_PORT_MASK, notification);
+ orientation = FIELD_GET(SC8180X_ORIENTATION_MASK, notification);
+ mux = FIELD_GET(SC8180X_MUX_MASK, notification);
+ mode = FIELD_GET(SC8180X_MODE_MASK, notification);
+ hpd_state = FIELD_GET(SC8180X_HPD_STATE_MASK, notification);
+ hpd_irq = FIELD_GET(SC8180X_HPD_IRQ_MASK, notification);
+
+ svid = mux == 2 ? USB_TYPEC_DP_SID : 0;
+
+ if (!altmode->ports[port].altmode) {
+ dev_dbg(altmode->dev, "notification on undefined port %d\n", port);
+ return;
+ }
+
+ alt_port = &altmode->ports[port];
+ alt_port->orientation = pmic_glink_altmode_orientation(orientation);
+ alt_port->svid = svid;
+ alt_port->mode = mode;
+ alt_port->hpd_state = hpd_state;
+ alt_port->hpd_irq = hpd_irq;
+ schedule_work(&alt_port->work);
+}
+
+#define SC8280XP_DPAM_MASK 0x3f
+#define SC8280XP_HPD_STATE_MASK BIT(6)
+#define SC8280XP_HPD_IRQ_MASK BIT(7)
+
+static void pmic_glink_altmode_sc8280xp_notify(struct pmic_glink_altmode *altmode,
+ u16 svid, const void *data, size_t len)
+{
+ struct pmic_glink_altmode_port *alt_port;
+ const struct usbc_notify *notify;
+ u8 orientation;
+ u8 hpd_state;
+ u8 hpd_irq;
+ u8 mode;
+ u8 port;
+
+ if (len != sizeof(*notify)) {
+ dev_warn(altmode->dev, "invalid length USBC_NOTIFY_IND: %zd\n",
+ len);
+ return;
+ }
+
+ notify = data;
+
+ port = notify->payload[0];
+ orientation = notify->payload[1];
+ mode = FIELD_GET(SC8280XP_DPAM_MASK, notify->payload[8]) - DPAM_HPD_A;
+ hpd_state = FIELD_GET(SC8280XP_HPD_STATE_MASK, notify->payload[8]);
+ hpd_irq = FIELD_GET(SC8280XP_HPD_IRQ_MASK, notify->payload[8]);
+
+ if (!altmode->ports[port].altmode) {
+ dev_dbg(altmode->dev, "notification on undefined port %d\n", port);
+ return;
+ }
+
+ alt_port = &altmode->ports[port];
+ alt_port->orientation = pmic_glink_altmode_orientation(orientation);
+ alt_port->svid = svid;
+ alt_port->mode = mode;
+ alt_port->hpd_state = hpd_state;
+ alt_port->hpd_irq = hpd_irq;
+ schedule_work(&alt_port->work);
+}
+
+static void pmic_glink_altmode_callback(const void *data, size_t len, void *priv)
+{
+ struct pmic_glink_altmode *altmode = priv;
+ const struct pmic_glink_hdr *hdr = data;
+ u16 opcode;
+ u16 svid;
+
+ opcode = le32_to_cpu(hdr->opcode) & 0xff;
+ svid = le32_to_cpu(hdr->opcode) >> 16;
+
+ switch (opcode) {
+ case USBC_CMD_WRITE_REQ:
+ complete(&altmode->pan_ack);
+ break;
+ case USBC_NOTIFY_IND:
+ pmic_glink_altmode_sc8280xp_notify(altmode, svid, data, len);
+ break;
+ case USBC_SC8180X_NOTIFY_IND:
+ pmic_glink_altmode_sc8180xp_notify(altmode, data, len);
+ break;
+ }
+}
+
+static int pmic_glink_altmode_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL;
+}
+
+static const struct drm_bridge_funcs pmic_glink_altmode_bridge_funcs = {
+ .attach = pmic_glink_altmode_attach,
+};
+
+static void pmic_glink_altmode_put_mux(void *data)
+{
+ typec_mux_put(data);
+}
+
+static void pmic_glink_altmode_put_switch(void *data)
+{
+ typec_switch_put(data);
+}
+
+static void pmic_glink_altmode_enable_worker(struct work_struct *work)
+{
+ struct pmic_glink_altmode *altmode = work_to_altmode(work);
+ int ret;
+
+ ret = pmic_glink_altmode_request(altmode, ALTMODE_PAN_EN, 0);
+ if (ret)
+ dev_err(altmode->dev, "failed to request altmode notifications\n");
+}
+
+static void pmic_glink_altmode_pdr_notify(void *priv, int state)
+{
+ struct pmic_glink_altmode *altmode = priv;
+
+ if (state == SERVREG_SERVICE_STATE_UP)
+ schedule_work(&altmode->enable_work);
+}
+
+static const struct of_device_id pmic_glink_altmode_of_quirks[] = {
+ { .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)PMIC_GLINK_OWNER_USBC },
+ {}
+};
+
+static int pmic_glink_altmode_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct pmic_glink_altmode_port *alt_port;
+ struct pmic_glink_altmode *altmode;
+ struct typec_altmode_desc mux_desc = {};
+ const struct of_device_id *match;
+ struct fwnode_handle *fwnode;
+ struct device *dev = &adev->dev;
+ u32 port;
+ int ret;
+
+ altmode = devm_kzalloc(dev, sizeof(*altmode), GFP_KERNEL);
+ if (!altmode)
+ return -ENOMEM;
+
+ altmode->dev = dev;
+
+ match = of_match_device(pmic_glink_altmode_of_quirks, dev->parent);
+ if (match)
+ altmode->owner_id = (unsigned long)match->data;
+ else
+ altmode->owner_id = PMIC_GLINK_OWNER_USBC_PAN;
+
+ INIT_WORK(&altmode->enable_work, pmic_glink_altmode_enable_worker);
+ init_completion(&altmode->pan_ack);
+ mutex_init(&altmode->lock);
+
+ device_for_each_child_node(dev, fwnode) {
+ ret = fwnode_property_read_u32(fwnode, "reg", &port);
+ if (ret < 0) {
+ dev_err(dev, "missing reg property of %pOFn\n", fwnode);
+ return ret;
+ }
+
+ if (port >= ARRAY_SIZE(altmode->ports)) {
+ dev_warn(dev, "invalid connector number, ignoring\n");
+ continue;
+ }
+
+ if (altmode->ports[port].altmode) {
+ dev_err(dev, "multiple connector definition for port %u\n", port);
+ return -EINVAL;
+ }
+
+ alt_port = &altmode->ports[port];
+ alt_port->altmode = altmode;
+ alt_port->index = port;
+ INIT_WORK(&alt_port->work, pmic_glink_altmode_worker);
+
+ alt_port->bridge.funcs = &pmic_glink_altmode_bridge_funcs;
+ alt_port->bridge.of_node = to_of_node(fwnode);
+ alt_port->bridge.ops = DRM_BRIDGE_OP_HPD;
+ alt_port->bridge.type = DRM_MODE_CONNECTOR_USB;
+
+ ret = devm_drm_bridge_add(dev, &alt_port->bridge);
+ if (ret)
+ return ret;
+
+ alt_port->dp_alt.svid = USB_TYPEC_DP_SID;
+ alt_port->dp_alt.mode = USB_TYPEC_DP_MODE;
+ alt_port->dp_alt.active = 1;
+
+ mux_desc.svid = USB_TYPEC_DP_SID;
+ mux_desc.mode = USB_TYPEC_DP_MODE;
+ alt_port->typec_mux = fwnode_typec_mux_get(fwnode, &mux_desc);
+ if (IS_ERR(alt_port->typec_mux))
+ return dev_err_probe(dev, PTR_ERR(alt_port->typec_mux),
+ "failed to acquire mode-switch for port: %d\n",
+ port);
+
+ ret = devm_add_action_or_reset(dev, pmic_glink_altmode_put_mux,
+ alt_port->typec_mux);
+ if (ret)
+ return ret;
+
+ alt_port->typec_switch = fwnode_typec_switch_get(fwnode);
+ if (IS_ERR(alt_port->typec_switch))
+ return dev_err_probe(dev, PTR_ERR(alt_port->typec_switch),
+ "failed to acquire orientation-switch for port: %d\n",
+ port);
+
+ ret = devm_add_action_or_reset(dev, pmic_glink_altmode_put_switch,
+ alt_port->typec_switch);
+ if (ret)
+ return ret;
+ }
+
+ altmode->client = devm_pmic_glink_register_client(dev,
+ altmode->owner_id,
+ pmic_glink_altmode_callback,
+ pmic_glink_altmode_pdr_notify,
+ altmode);
+ return PTR_ERR_OR_ZERO(altmode->client);
+}
+
+static const struct auxiliary_device_id pmic_glink_altmode_id_table[] = {
+ { .name = "pmic_glink.altmode", },
+ {},
+};
+MODULE_DEVICE_TABLE(auxiliary, pmic_glink_altmode_id_table);
+
+static struct auxiliary_driver pmic_glink_altmode_driver = {
+ .name = "pmic_glink_altmode",
+ .probe = pmic_glink_altmode_probe,
+ .id_table = pmic_glink_altmode_id_table,
+};
+
+module_auxiliary_driver(pmic_glink_altmode_driver);
+
+MODULE_DESCRIPTION("Qualcomm PMIC GLINK Altmode driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/qcom/qcom_stats.c b/drivers/soc/qcom/qcom_stats.c
index 6228af057120..c207bb96c523 100644
--- a/drivers/soc/qcom/qcom_stats.c
+++ b/drivers/soc/qcom/qcom_stats.c
@@ -92,7 +92,7 @@ static int qcom_subsystem_sleep_stats_show(struct seq_file *s, void *unused)
/* Items are allocated lazily, so lookup pointer each time */
stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL);
if (IS_ERR(stat))
- return -EIO;
+ return 0;
qcom_print_stats(s, stat);
@@ -170,20 +170,14 @@ static void qcom_create_soc_sleep_stat_files(struct dentry *root, void __iomem *
static void qcom_create_subsystem_stat_files(struct dentry *root,
const struct stats_config *config)
{
- const struct sleep_stats *stat;
int i;
if (!config->subsystem_stats_in_smem)
return;
- for (i = 0; i < ARRAY_SIZE(subsystems); i++) {
- stat = qcom_smem_get(subsystems[i].pid, subsystems[i].smem_item, NULL);
- if (IS_ERR(stat))
- continue;
-
+ for (i = 0; i < ARRAY_SIZE(subsystems); i++)
debugfs_create_file(subsystems[i].name, 0400, root, (void *)&subsystems[i],
&qcom_subsystem_sleep_stats_fops);
- }
}
static int qcom_stats_probe(struct platform_device *pdev)
diff --git a/drivers/soc/qcom/ramp_controller.c b/drivers/soc/qcom/ramp_controller.c
new file mode 100644
index 000000000000..dc74d2a19de2
--- /dev/null
+++ b/drivers/soc/qcom/ramp_controller.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Qualcomm Ramp Controller driver
+ * Copyright (c) 2022, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@collabora.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define RC_UPDATE_EN BIT(0)
+#define RC_ROOT_EN BIT(1)
+
+#define RC_REG_CFG_UPDATE 0x60
+#define RC_CFG_UPDATE_EN BIT(8)
+#define RC_CFG_ACK GENMASK(31, 16)
+
+#define RC_DCVS_CFG_SID 2
+#define RC_LINK_SID 3
+#define RC_LMH_SID 6
+#define RC_DFS_SID 14
+
+#define RC_UPDATE_TIMEOUT_US 500
+
+/**
+ * struct qcom_ramp_controller_desc - SoC specific parameters
+ * @cfg_dfs_sid: Dynamic Frequency Scaling SID configuration
+ * @cfg_link_sid: Link SID configuration
+ * @cfg_lmh_sid: Limits Management hardware SID configuration
+ * @cfg_ramp_en: Ramp Controller enable sequence
+ * @cfg_ramp_dis: Ramp Controller disable sequence
+ * @cmd_reg: Command register offset
+ * @num_dfs_sids: Number of DFS SIDs (max 8)
+ * @num_link_sids: Number of Link SIDs (max 3)
+ * @num_lmh_sids: Number of LMh SIDs (max 8)
+ * @num_ramp_en: Number of entries in enable sequence
+ * @num_ramp_dis: Number of entries in disable sequence
+ */
+struct qcom_ramp_controller_desc {
+ const struct reg_sequence *cfg_dfs_sid;
+ const struct reg_sequence *cfg_link_sid;
+ const struct reg_sequence *cfg_lmh_sid;
+ const struct reg_sequence *cfg_ramp_en;
+ const struct reg_sequence *cfg_ramp_dis;
+ u8 cmd_reg;
+ u8 num_dfs_sids;
+ u8 num_link_sids;
+ u8 num_lmh_sids;
+ u8 num_ramp_en;
+ u8 num_ramp_dis;
+};
+
+/**
+ * struct qcom_ramp_controller - Main driver structure
+ * @regmap: Regmap handle
+ * @desc: SoC specific parameters
+ */
+struct qcom_ramp_controller {
+ struct regmap *regmap;
+ const struct qcom_ramp_controller_desc *desc;
+};
+
+/**
+ * rc_wait_for_update() - Wait for Ramp Controller root update
+ * @qrc: Main driver structure
+ *
+ * Return: Zero for success or negative number for failure
+ */
+static int rc_wait_for_update(struct qcom_ramp_controller *qrc)
+{
+ const struct qcom_ramp_controller_desc *d = qrc->desc;
+ struct regmap *r = qrc->regmap;
+ u32 val;
+ int ret;
+
+ ret = regmap_set_bits(r, d->cmd_reg, RC_ROOT_EN);
+ if (ret)
+ return ret;
+
+ return regmap_read_poll_timeout(r, d->cmd_reg, val, !(val & RC_UPDATE_EN),
+ 1, RC_UPDATE_TIMEOUT_US);
+}
+
+/**
+ * rc_set_cfg_update() - Ramp Controller configuration update
+ * @qrc: Main driver structure
+ * @ce: Configuration entry to update
+ *
+ * Return: Zero for success or negative number for failure
+ */
+static int rc_set_cfg_update(struct qcom_ramp_controller *qrc, u8 ce)
+{
+ const struct qcom_ramp_controller_desc *d = qrc->desc;
+ struct regmap *r = qrc->regmap;
+ u32 ack, val;
+ int ret;
+
+ /* The ack bit is between bits 16-31 of RC_REG_CFG_UPDATE */
+ ack = FIELD_PREP(RC_CFG_ACK, BIT(ce));
+
+ /* Write the configuration type first... */
+ ret = regmap_set_bits(r, d->cmd_reg + RC_REG_CFG_UPDATE, ce);
+ if (ret)
+ return ret;
+
+ /* ...and after that, enable the update bit to sync the changes */
+ ret = regmap_set_bits(r, d->cmd_reg + RC_REG_CFG_UPDATE, RC_CFG_UPDATE_EN);
+ if (ret)
+ return ret;
+
+ /* Wait for the changes to go through */
+ ret = regmap_read_poll_timeout(r, d->cmd_reg + RC_REG_CFG_UPDATE, val,
+ val & ack, 1, RC_UPDATE_TIMEOUT_US);
+ if (ret)
+ return ret;
+
+ /*
+ * Configuration update success! The CFG_UPDATE register will not be
+ * cleared automatically upon applying the configuration, so we have
+ * to do that manually in order to leave the ramp controller in a
+ * predictable and clean state.
+ */
+ ret = regmap_write(r, d->cmd_reg + RC_REG_CFG_UPDATE, 0);
+ if (ret)
+ return ret;
+
+ /* Wait for the update bit cleared ack */
+ return regmap_read_poll_timeout(r, d->cmd_reg + RC_REG_CFG_UPDATE,
+ val, !(val & RC_CFG_ACK), 1,
+ RC_UPDATE_TIMEOUT_US);
+}
+
+/**
+ * rc_write_cfg - Send configuration sequence
+ * @qrc: Main driver structure
+ * @seq: Register sequence to send before asking for update
+ * @ce: Configuration SID
+ * @nsids: Total number of SIDs
+ *
+ * Returns: Zero for success or negative number for error
+ */
+static int rc_write_cfg(struct qcom_ramp_controller *qrc,
+ const struct reg_sequence *seq,
+ u16 ce, u8 nsids)
+{
+ int ret;
+ u8 i;
+
+ /* Check if, and wait until the ramp controller is ready */
+ ret = rc_wait_for_update(qrc);
+ if (ret)
+ return ret;
+
+ /* Write the sequence */
+ ret = regmap_multi_reg_write(qrc->regmap, seq, nsids);
+ if (ret)
+ return ret;
+
+ /* Pull the trigger: do config update starting from the last sid */
+ for (i = 0; i < nsids; i++) {
+ ret = rc_set_cfg_update(qrc, (u8)ce - i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * rc_ramp_ctrl_enable() - Enable Ramp up/down Control
+ * @qrc: Main driver structure
+ *
+ * Return: Zero for success or negative number for error
+ */
+static int rc_ramp_ctrl_enable(struct qcom_ramp_controller *qrc)
+{
+ const struct qcom_ramp_controller_desc *d = qrc->desc;
+ int i, ret;
+
+ for (i = 0; i < d->num_ramp_en; i++) {
+ ret = rc_write_cfg(qrc, &d->cfg_ramp_en[i], RC_DCVS_CFG_SID, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * qcom_ramp_controller_start() - Initialize and start the ramp controller
+ * @qrc: Main driver structure
+ *
+ * The Ramp Controller needs to be initialized by programming the relevant
+ * registers with SoC-specific configuration: once programming is done,
+ * the hardware will take care of the rest (no further handling required).
+ *
+ * Return: Zero for success or negative number for error
+ */
+static int qcom_ramp_controller_start(struct qcom_ramp_controller *qrc)
+{
+ const struct qcom_ramp_controller_desc *d = qrc->desc;
+ int ret;
+
+ /* Program LMH, DFS, Link SIDs */
+ ret = rc_write_cfg(qrc, d->cfg_lmh_sid, RC_LMH_SID, d->num_lmh_sids);
+ if (ret)
+ return ret;
+
+ ret = rc_write_cfg(qrc, d->cfg_dfs_sid, RC_DFS_SID, d->num_dfs_sids);
+ if (ret)
+ return ret;
+
+ ret = rc_write_cfg(qrc, d->cfg_link_sid, RC_LINK_SID, d->num_link_sids);
+ if (ret)
+ return ret;
+
+ /* Everything is ready! Enable the ramp up/down control */
+ return rc_ramp_ctrl_enable(qrc);
+}
+
+static const struct regmap_config qrc_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x68,
+ .fast_io = true,
+};
+
+static const struct reg_sequence msm8976_cfg_dfs_sid[] = {
+ { 0x10, 0xfefebff7 },
+ { 0x14, 0xfdff7fef },
+ { 0x18, 0xfbffdefb },
+ { 0x1c, 0xb69b5555 },
+ { 0x20, 0x24929249 },
+ { 0x24, 0x49241112 },
+ { 0x28, 0x11112111 },
+ { 0x2c, 0x8102 }
+};
+
+static const struct reg_sequence msm8976_cfg_link_sid[] = {
+ { 0x40, 0xfc987 }
+};
+
+static const struct reg_sequence msm8976_cfg_lmh_sid[] = {
+ { 0x30, 0x77706db },
+ { 0x34, 0x5550249 },
+ { 0x38, 0x111 }
+};
+
+static const struct reg_sequence msm8976_cfg_ramp_en[] = {
+ { 0x50, 0x800 }, /* pre_en */
+ { 0x50, 0xc00 }, /* en */
+ { 0x50, 0x400 } /* post_en */
+};
+
+static const struct reg_sequence msm8976_cfg_ramp_dis[] = {
+ { 0x50, 0x0 }
+};
+
+static const struct qcom_ramp_controller_desc msm8976_rc_cfg = {
+ .cfg_dfs_sid = msm8976_cfg_dfs_sid,
+ .num_dfs_sids = ARRAY_SIZE(msm8976_cfg_dfs_sid),
+
+ .cfg_link_sid = msm8976_cfg_link_sid,
+ .num_link_sids = ARRAY_SIZE(msm8976_cfg_link_sid),
+
+ .cfg_lmh_sid = msm8976_cfg_lmh_sid,
+ .num_lmh_sids = ARRAY_SIZE(msm8976_cfg_lmh_sid),
+
+ .cfg_ramp_en = msm8976_cfg_ramp_en,
+ .num_ramp_en = ARRAY_SIZE(msm8976_cfg_ramp_en),
+
+ .cfg_ramp_dis = msm8976_cfg_ramp_dis,
+ .num_ramp_dis = ARRAY_SIZE(msm8976_cfg_ramp_dis),
+
+ .cmd_reg = 0x0,
+};
+
+static int qcom_ramp_controller_probe(struct platform_device *pdev)
+{
+ struct qcom_ramp_controller *qrc;
+ void __iomem *base;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ qrc = devm_kmalloc(&pdev->dev, sizeof(*qrc), GFP_KERNEL);
+ if (!qrc)
+ return -ENOMEM;
+
+ qrc->desc = device_get_match_data(&pdev->dev);
+ if (!qrc)
+ return -EINVAL;
+
+ qrc->regmap = devm_regmap_init_mmio(&pdev->dev, base, &qrc_regmap_config);
+ if (IS_ERR(qrc->regmap))
+ return PTR_ERR(qrc->regmap);
+
+ platform_set_drvdata(pdev, qrc);
+
+ return qcom_ramp_controller_start(qrc);
+}
+
+static int qcom_ramp_controller_remove(struct platform_device *pdev)
+{
+ struct qcom_ramp_controller *qrc = platform_get_drvdata(pdev);
+
+ return rc_write_cfg(qrc, qrc->desc->cfg_ramp_dis,
+ RC_DCVS_CFG_SID, qrc->desc->num_ramp_dis);
+}
+
+static const struct of_device_id qcom_ramp_controller_match_table[] = {
+ { .compatible = "qcom,msm8976-ramp-controller", .data = &msm8976_rc_cfg },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qcom_ramp_controller_match_table);
+
+static struct platform_driver qcom_ramp_controller_driver = {
+ .driver = {
+ .name = "qcom-ramp-controller",
+ .of_match_table = qcom_ramp_controller_match_table,
+ .suppress_bind_attrs = true,
+ },
+ .probe = qcom_ramp_controller_probe,
+ .remove = qcom_ramp_controller_remove,
+};
+
+static int __init qcom_ramp_controller_init(void)
+{
+ return platform_driver_register(&qcom_ramp_controller_driver);
+}
+arch_initcall(qcom_ramp_controller_init);
+
+MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>");
+MODULE_DESCRIPTION("Qualcomm Ramp Controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index 0feaae357821..2d3ee22b9249 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -14,9 +14,10 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/io.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#define QCOM_RMTFS_MEM_DEV_MAX (MINORMASK + 1)
+#define NUM_MAX_VMIDS 2
static dev_t qcom_rmtfs_mem_major;
@@ -171,12 +172,12 @@ static void qcom_rmtfs_mem_release_device(struct device *dev)
static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
- struct qcom_scm_vmperm perms[2];
+ struct qcom_scm_vmperm perms[NUM_MAX_VMIDS + 1];
struct reserved_mem *rmem;
struct qcom_rmtfs_mem *rmtfs_mem;
u32 client_id;
- u32 vmid;
- int ret;
+ u32 num_vmids, vmid[NUM_MAX_VMIDS];
+ int ret, i;
rmem = of_reserved_mem_lookup(node);
if (!rmem) {
@@ -226,7 +227,18 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
goto put_device;
}
- ret = of_property_read_u32(node, "qcom,vmid", &vmid);
+ num_vmids = of_property_count_u32_elems(node, "qcom,vmid");
+ if (num_vmids < 0) {
+ dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", ret);
+ goto remove_cdev;
+ } else if (num_vmids > NUM_MAX_VMIDS) {
+ dev_warn(&pdev->dev,
+ "too many VMIDs (%d) specified! Only mapping first %d entries\n",
+ num_vmids, NUM_MAX_VMIDS);
+ num_vmids = NUM_MAX_VMIDS;
+ }
+
+ ret = of_property_read_u32_array(node, "qcom,vmid", vmid, num_vmids);
if (ret < 0 && ret != -EINVAL) {
dev_err(&pdev->dev, "failed to parse qcom,vmid\n");
goto remove_cdev;
@@ -238,12 +250,15 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
perms[0].vmid = QCOM_SCM_VMID_HLOS;
perms[0].perm = QCOM_SCM_PERM_RW;
- perms[1].vmid = vmid;
- perms[1].perm = QCOM_SCM_PERM_RW;
+
+ for (i = 0; i < num_vmids; i++) {
+ perms[i + 1].vmid = vmid[i];
+ perms[i + 1].perm = QCOM_SCM_PERM_RW;
+ }
rmtfs_mem->perms = BIT(QCOM_SCM_VMID_HLOS);
ret = qcom_scm_assign_mem(rmtfs_mem->addr, rmtfs_mem->size,
- &rmtfs_mem->perms, perms, 2);
+ &rmtfs_mem->perms, perms, num_vmids + 1);
if (ret < 0) {
dev_err(&pdev->dev, "assign memory failed\n");
goto remove_cdev;
diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index 4c2d2c296790..f20e2a49a669 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -187,6 +187,16 @@ static struct rpmhpd nsp = {
.res_name = "nsp.lvl",
};
+static struct rpmhpd nsp0 = {
+ .pd = { .name = "nsp0", },
+ .res_name = "nsp0.lvl",
+};
+
+static struct rpmhpd nsp1 = {
+ .pd = { .name = "nsp1", },
+ .res_name = "nsp1.lvl",
+};
+
static struct rpmhpd qphy = {
.pd = { .name = "qphy", },
.res_name = "qphy.lvl",
@@ -212,6 +222,29 @@ static const struct rpmhpd_desc sa8540p_desc = {
.num_pds = ARRAY_SIZE(sa8540p_rpmhpds),
};
+/* SA8775P RPMH power domains */
+static struct rpmhpd *sa8775p_rpmhpds[] = {
+ [SA8775P_CX] = &cx,
+ [SA8775P_CX_AO] = &cx_ao,
+ [SA8775P_EBI] = &ebi,
+ [SA8775P_GFX] = &gfx,
+ [SA8775P_LCX] = &lcx,
+ [SA8775P_LMX] = &lmx,
+ [SA8775P_MMCX] = &mmcx,
+ [SA8775P_MMCX_AO] = &mmcx_ao,
+ [SA8775P_MXC] = &mxc,
+ [SA8775P_MXC_AO] = &mxc_ao,
+ [SA8775P_MX] = &mx,
+ [SA8775P_MX_AO] = &mx_ao,
+ [SA8775P_NSP0] = &nsp0,
+ [SA8775P_NSP1] = &nsp1,
+};
+
+static const struct rpmhpd_desc sa8775p_desc = {
+ .rpmhpds = sa8775p_rpmhpds,
+ .num_pds = ARRAY_SIZE(sa8775p_rpmhpds),
+};
+
/* SDM670 RPMH powerdomains */
static struct rpmhpd *sdm670_rpmhpds[] = {
[SDM670_CX] = &cx_w_mx_parent,
@@ -487,6 +520,7 @@ static const struct rpmhpd_desc sc8280xp_desc = {
static const struct of_device_id rpmhpd_match_table[] = {
{ .compatible = "qcom,qdu1000-rpmhpd", .data = &qdu1000_desc },
{ .compatible = "qcom,sa8540p-rpmhpd", .data = &sa8540p_desc },
+ { .compatible = "qcom,sa8775p-rpmhpd", .data = &sa8775p_desc },
{ .compatible = "qcom,sc7180-rpmhpd", .data = &sc7180_desc },
{ .compatible = "qcom,sc7280-rpmhpd", .data = &sc7280_desc },
{ .compatible = "qcom,sc8180x-rpmhpd", .data = &sc8180x_desc },
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index f0db6a10cf4e..337b1ad1cd3b 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -471,23 +471,6 @@ static const struct rpmpd_desc qcm2290_desc = {
.max_state = RPM_SMD_LEVEL_TURBO_NO_CPR,
};
-static struct rpmpd *sm4250_rpmpds[] = {
- [SM4250_VDDCX] = &sm6115_vddcx,
- [SM4250_VDDCX_AO] = &sm6115_vddcx_ao,
- [SM4250_VDDCX_VFL] = &sm6115_vddcx_vfl,
- [SM4250_VDDMX] = &sm6115_vddmx,
- [SM4250_VDDMX_AO] = &sm6115_vddmx_ao,
- [SM4250_VDDMX_VFL] = &sm6115_vddmx_vfl,
- [SM4250_VDD_LPI_CX] = &sm6115_vdd_lpi_cx,
- [SM4250_VDD_LPI_MX] = &sm6115_vdd_lpi_mx,
-};
-
-static const struct rpmpd_desc sm4250_desc = {
- .rpmpds = sm4250_rpmpds,
- .num_pds = ARRAY_SIZE(sm4250_rpmpds),
- .max_state = RPM_SMD_LEVEL_TURBO_NO_CPR,
-};
-
static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,mdm9607-rpmpd", .data = &mdm9607_desc },
{ .compatible = "qcom,msm8226-rpmpd", .data = &msm8226_desc },
@@ -502,7 +485,6 @@ static const struct of_device_id rpmpd_match_table[] = {
{ .compatible = "qcom,qcm2290-rpmpd", .data = &qcm2290_desc },
{ .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc },
{ .compatible = "qcom,sdm660-rpmpd", .data = &sdm660_desc },
- { .compatible = "qcom,sm4250-rpmpd", .data = &sm4250_desc },
{ .compatible = "qcom,sm6115-rpmpd", .data = &sm6115_desc },
{ .compatible = "qcom,sm6125-rpmpd", .data = &sm6125_desc },
{ .compatible = "qcom,sm6375-rpmpd", .data = &sm6375_desc },
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 7e3b6a7ea34c..523627d5d398 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -233,6 +233,7 @@ static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
static const struct of_device_id qcom_smd_rpm_of_match[] = {
{ .compatible = "qcom,rpm-apq8084" },
{ .compatible = "qcom,rpm-ipq6018" },
+ { .compatible = "qcom,rpm-ipq9574" },
{ .compatible = "qcom,rpm-msm8226" },
{ .compatible = "qcom,rpm-msm8909" },
{ .compatible = "qcom,rpm-msm8916" },
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index ebcbf9b9c18b..e9012ca1a87b 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -169,6 +169,13 @@ struct socinfo {
__le32 ndefective_parts_array_offset;
/* Version 15 */
__le32 nmodem_supported;
+ /* Version 16 */
+ __le32 feature_code;
+ __le32 pcode;
+ __le32 npartnamemap_offset;
+ __le32 nnum_partname_mapping;
+ /* Version 17 */
+ __le32 oem_variant;
};
#ifdef CONFIG_DEBUG_FS
@@ -189,6 +196,9 @@ struct socinfo_params {
u32 num_defective_parts;
u32 ndefective_parts_array_offset;
u32 nmodem_supported;
+ u32 feature_code;
+ u32 pcode;
+ u32 oem_variant;
};
struct smem_image_version {
@@ -214,44 +224,72 @@ struct soc_id {
};
static const struct soc_id soc_id[] = {
+ { qcom_board_id(MSM8260) },
+ { qcom_board_id(MSM8660) },
+ { qcom_board_id(APQ8060) },
{ qcom_board_id(MSM8960) },
{ qcom_board_id(APQ8064) },
+ { qcom_board_id(MSM8930) },
+ { qcom_board_id(MSM8630) },
+ { qcom_board_id(MSM8230) },
+ { qcom_board_id(APQ8030) },
+ { qcom_board_id(MSM8627) },
+ { qcom_board_id(MSM8227) },
{ qcom_board_id(MSM8660A) },
{ qcom_board_id(MSM8260A) },
{ qcom_board_id(APQ8060A) },
{ qcom_board_id(MSM8974) },
+ { qcom_board_id(MSM8225) },
+ { qcom_board_id(MSM8625) },
{ qcom_board_id(MPQ8064) },
{ qcom_board_id(MSM8960AB) },
{ qcom_board_id(APQ8060AB) },
{ qcom_board_id(MSM8260AB) },
{ qcom_board_id(MSM8660AB) },
+ { qcom_board_id(MSM8930AA) },
+ { qcom_board_id(MSM8630AA) },
+ { qcom_board_id(MSM8230AA) },
{ qcom_board_id(MSM8626) },
{ qcom_board_id(MSM8610) },
{ qcom_board_id(APQ8064AB) },
+ { qcom_board_id(MSM8930AB) },
+ { qcom_board_id(MSM8630AB) },
+ { qcom_board_id(MSM8230AB) },
+ { qcom_board_id(APQ8030AB) },
{ qcom_board_id(MSM8226) },
{ qcom_board_id(MSM8526) },
+ { qcom_board_id(APQ8030AA) },
{ qcom_board_id(MSM8110) },
{ qcom_board_id(MSM8210) },
{ qcom_board_id(MSM8810) },
{ qcom_board_id(MSM8212) },
{ qcom_board_id(MSM8612) },
{ qcom_board_id(MSM8112) },
+ { qcom_board_id(MSM8125) },
{ qcom_board_id(MSM8225Q) },
{ qcom_board_id(MSM8625Q) },
{ qcom_board_id(MSM8125Q) },
{ qcom_board_id(APQ8064AA) },
{ qcom_board_id(APQ8084) },
+ { qcom_board_id(MSM8130) },
+ { qcom_board_id(MSM8130AA) },
+ { qcom_board_id(MSM8130AB) },
+ { qcom_board_id(MSM8627AA) },
+ { qcom_board_id(MSM8227AA) },
{ qcom_board_id(APQ8074) },
{ qcom_board_id(MSM8274) },
{ qcom_board_id(MSM8674) },
+ { qcom_board_id(MDM9635) },
{ qcom_board_id_named(MSM8974PRO_AC, "MSM8974PRO-AC") },
{ qcom_board_id(MSM8126) },
{ qcom_board_id(APQ8026) },
{ qcom_board_id(MSM8926) },
+ { qcom_board_id(IPQ8062) },
+ { qcom_board_id(IPQ8064) },
+ { qcom_board_id(IPQ8066) },
+ { qcom_board_id(IPQ8068) },
{ qcom_board_id(MSM8326) },
{ qcom_board_id(MSM8916) },
- { qcom_board_id(MSM8956) },
- { qcom_board_id(MSM8976) },
{ qcom_board_id(MSM8994) },
{ qcom_board_id_named(APQ8074PRO_AA, "APQ8074PRO-AA") },
{ qcom_board_id_named(APQ8074PRO_AB, "APQ8074PRO-AB") },
@@ -273,32 +311,74 @@ static const struct soc_id soc_id[] = {
{ qcom_board_id(MSM8510) },
{ qcom_board_id(MSM8512) },
{ qcom_board_id(MSM8936) },
+ { qcom_board_id(MDM9640) },
{ qcom_board_id(MSM8939) },
{ qcom_board_id(APQ8036) },
{ qcom_board_id(APQ8039) },
+ { qcom_board_id(MSM8236) },
+ { qcom_board_id(MSM8636) },
+ { qcom_board_id(MSM8909) },
{ qcom_board_id(MSM8996) },
{ qcom_board_id(APQ8016) },
{ qcom_board_id(MSM8216) },
{ qcom_board_id(MSM8116) },
{ qcom_board_id(MSM8616) },
{ qcom_board_id(MSM8992) },
+ { qcom_board_id(APQ8092) },
{ qcom_board_id(APQ8094) },
+ { qcom_board_id(MSM8209) },
+ { qcom_board_id(MSM8208) },
+ { qcom_board_id(MDM9209) },
+ { qcom_board_id(MDM9309) },
+ { qcom_board_id(MDM9609) },
+ { qcom_board_id(MSM8239) },
+ { qcom_board_id(MSM8952) },
+ { qcom_board_id(APQ8009) },
+ { qcom_board_id(MSM8956) },
+ { qcom_board_id(MSM8929) },
+ { qcom_board_id(MSM8629) },
+ { qcom_board_id(MSM8229) },
+ { qcom_board_id(APQ8029) },
+ { qcom_board_id(APQ8056) },
+ { qcom_board_id(MSM8609) },
+ { qcom_board_id(APQ8076) },
+ { qcom_board_id(MSM8976) },
+ { qcom_board_id(IPQ8065) },
+ { qcom_board_id(IPQ8069) },
+ { qcom_board_id(MDM9650) },
+ { qcom_board_id(MDM9655) },
+ { qcom_board_id(MDM9250) },
+ { qcom_board_id(MDM9255) },
+ { qcom_board_id(MDM9350) },
+ { qcom_board_id(APQ8052) },
{ qcom_board_id(MDM9607) },
{ qcom_board_id(APQ8096) },
{ qcom_board_id(MSM8998) },
{ qcom_board_id(MSM8953) },
+ { qcom_board_id(MSM8937) },
+ { qcom_board_id(APQ8037) },
{ qcom_board_id(MDM8207) },
{ qcom_board_id(MDM9207) },
{ qcom_board_id(MDM9307) },
{ qcom_board_id(MDM9628) },
+ { qcom_board_id(MSM8909W) },
+ { qcom_board_id(APQ8009W) },
+ { qcom_board_id(MSM8996L) },
+ { qcom_board_id(MSM8917) },
{ qcom_board_id(APQ8053) },
{ qcom_board_id(MSM8996SG) },
+ { qcom_board_id(APQ8017) },
+ { qcom_board_id(MSM8217) },
+ { qcom_board_id(MSM8617) },
{ qcom_board_id(MSM8996AU) },
{ qcom_board_id(APQ8096AU) },
{ qcom_board_id(APQ8096SG) },
+ { qcom_board_id(MSM8940) },
+ { qcom_board_id(SDX201) },
{ qcom_board_id(SDM660) },
{ qcom_board_id(SDM630) },
{ qcom_board_id(APQ8098) },
+ { qcom_board_id(MSM8920) },
{ qcom_board_id(SDM845) },
{ qcom_board_id(MDM9206) },
{ qcom_board_id(IPQ8074) },
@@ -306,6 +386,8 @@ static const struct soc_id soc_id[] = {
{ qcom_board_id(SDM658) },
{ qcom_board_id(SDA658) },
{ qcom_board_id(SDA630) },
+ { qcom_board_id(MSM8905) },
+ { qcom_board_id(SDX202) },
{ qcom_board_id(SDM450) },
{ qcom_board_id(SM8150) },
{ qcom_board_id(SDA845) },
@@ -317,10 +399,15 @@ static const struct soc_id soc_id[] = {
{ qcom_board_id(SDM632) },
{ qcom_board_id(SDA632) },
{ qcom_board_id(SDA450) },
+ { qcom_board_id(SDM439) },
+ { qcom_board_id(SDM429) },
{ qcom_board_id(SM8250) },
{ qcom_board_id(SA8155) },
+ { qcom_board_id(SDA439) },
+ { qcom_board_id(SDA429) },
{ qcom_board_id(IPQ8070) },
{ qcom_board_id(IPQ8071) },
+ { qcom_board_id(QM215) },
{ qcom_board_id(IPQ8072A) },
{ qcom_board_id(IPQ8074A) },
{ qcom_board_id(IPQ8076A) },
@@ -330,18 +417,20 @@ static const struct soc_id soc_id[] = {
{ qcom_board_id(IPQ8071A) },
{ qcom_board_id(IPQ6018) },
{ qcom_board_id(IPQ6028) },
+ { qcom_board_id(SDM429W) },
{ qcom_board_id(SM4250) },
{ qcom_board_id(IPQ6000) },
{ qcom_board_id(IPQ6010) },
{ qcom_board_id(SC7180) },
{ qcom_board_id(SM6350) },
+ { qcom_board_id(QCM2150) },
+ { qcom_board_id(SDA429W) },
{ qcom_board_id(SM8350) },
{ qcom_board_id(SM6115) },
{ qcom_board_id(SC8280XP) },
{ qcom_board_id(IPQ6005) },
{ qcom_board_id(QRB5165) },
{ qcom_board_id(SM8450) },
- { qcom_board_id(SM8550) },
{ qcom_board_id(SM7225) },
{ qcom_board_id(SA8295P) },
{ qcom_board_id(SA8540P) },
@@ -352,12 +441,15 @@ static const struct soc_id soc_id[] = {
{ qcom_board_id(SC7280) },
{ qcom_board_id(SC7180P) },
{ qcom_board_id(SM6375) },
+ { qcom_board_id(SM8550) },
{ qcom_board_id(QRU1000) },
{ qcom_board_id(QDU1000) },
{ qcom_board_id(QDU1010) },
{ qcom_board_id(QRU1032) },
{ qcom_board_id(QRU1052) },
{ qcom_board_id(QRU1062) },
+ { qcom_board_id(IPQ5332) },
+ { qcom_board_id(IPQ5322) },
};
static const char *socinfo_machine(struct device *dev, unsigned int id)
@@ -512,6 +604,20 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
&qcom_socinfo->info.fmt);
switch (qcom_socinfo->info.fmt) {
+ case SOCINFO_VERSION(0, 17):
+ qcom_socinfo->info.oem_variant = __le32_to_cpu(info->oem_variant);
+ debugfs_create_u32("oem_variant", 0444, qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.oem_variant);
+ fallthrough;
+ case SOCINFO_VERSION(0, 16):
+ qcom_socinfo->info.feature_code = __le32_to_cpu(info->feature_code);
+ qcom_socinfo->info.pcode = __le32_to_cpu(info->pcode);
+
+ debugfs_create_u32("feature_code", 0444, qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.feature_code);
+ debugfs_create_u32("pcode", 0444, qcom_socinfo->dbg_root,
+ &qcom_socinfo->info.pcode);
+ fallthrough;
case SOCINFO_VERSION(0, 15):
qcom_socinfo->info.nmodem_supported = __le32_to_cpu(info->nmodem_supported);
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 660498252ec5..4e8b51ba2266 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -330,6 +330,7 @@ config ARCH_R9A09G011
bool "ARM64 Platform support for RZ/V2M"
select PM
select PM_GENERIC_DOMAINS
+ select PWC_RZV2M
help
This enables support for the Renesas RZ/V2M SoC.
@@ -345,6 +346,9 @@ config ARCH_R9A07G043
endif # RISCV
+config PWC_RZV2M
+ bool "Renesas RZ/V2M PWC support" if COMPILE_TEST
+
config RST_RCAR
bool "Reset Controller support for R-Car" if COMPILE_TEST
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 535868c9c7e4..6e4e77b0afff 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_R9A06G032) += r9a06g032-smp.o
endif
# Family
+obj-$(CONFIG_PWC_RZV2M) += pwc-rzv2m.o
obj-$(CONFIG_RST_RCAR) += rcar-rst.o
obj-$(CONFIG_SYSC_RCAR) += rcar-sysc.o
obj-$(CONFIG_SYSC_RCAR_GEN4) += rcar-gen4-sysc.o
diff --git a/drivers/soc/renesas/pwc-rzv2m.c b/drivers/soc/renesas/pwc-rzv2m.c
new file mode 100644
index 000000000000..c83bdbdabb64
--- /dev/null
+++ b/drivers/soc/renesas/pwc-rzv2m.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#define PWC_PWCRST 0x00
+#define PWC_PWCCKEN 0x04
+#define PWC_PWCCTL 0x50
+#define PWC_GPIO 0x80
+
+#define PWC_PWCRST_RSTSOFTAX 0x1
+#define PWC_PWCCKEN_ENGCKMAIN 0x1
+#define PWC_PWCCTL_PWOFF 0x1
+
+struct rzv2m_pwc_priv {
+ void __iomem *base;
+ struct device *dev;
+ struct gpio_chip gp;
+ DECLARE_BITMAP(ch_en_bits, 2);
+};
+
+static void rzv2m_pwc_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct rzv2m_pwc_priv *priv = gpiochip_get_data(chip);
+ u32 reg;
+
+ /* BIT 16 enables write to BIT 0, and BIT 17 enables write to BIT 1 */
+ reg = BIT(offset + 16);
+ if (value)
+ reg |= BIT(offset);
+
+ writel(reg, priv->base + PWC_GPIO);
+
+ assign_bit(offset, priv->ch_en_bits, value);
+}
+
+static int rzv2m_pwc_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rzv2m_pwc_priv *priv = gpiochip_get_data(chip);
+
+ return test_bit(offset, priv->ch_en_bits);
+}
+
+static int rzv2m_pwc_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int nr, int value)
+{
+ if (nr > 1)
+ return -EINVAL;
+
+ rzv2m_pwc_gpio_set(gc, nr, value);
+
+ return 0;
+}
+
+static const struct gpio_chip rzv2m_pwc_gc = {
+ .label = "gpio_rzv2m_pwc",
+ .owner = THIS_MODULE,
+ .get = rzv2m_pwc_gpio_get,
+ .set = rzv2m_pwc_gpio_set,
+ .direction_output = rzv2m_pwc_gpio_direction_output,
+ .can_sleep = false,
+ .ngpio = 2,
+ .base = -1,
+};
+
+static int rzv2m_pwc_poweroff(struct sys_off_data *data)
+{
+ struct rzv2m_pwc_priv *priv = data->cb_data;
+
+ writel(PWC_PWCRST_RSTSOFTAX, priv->base + PWC_PWCRST);
+ writel(PWC_PWCCKEN_ENGCKMAIN, priv->base + PWC_PWCCKEN);
+ writel(PWC_PWCCTL_PWOFF, priv->base + PWC_PWCCTL);
+
+ mdelay(150);
+
+ dev_err(priv->dev, "Failed to power off the system");
+
+ return NOTIFY_DONE;
+}
+
+static int rzv2m_pwc_probe(struct platform_device *pdev)
+{
+ struct rzv2m_pwc_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ /*
+ * The register used by this driver cannot be read, therefore set the
+ * outputs to their default values and initialize priv->ch_en_bits
+ * accordingly. BIT 16 enables write to BIT 0, BIT 17 enables write to
+ * BIT 1, and the default value of both BIT 0 and BIT 1 is 0.
+ */
+ writel(BIT(17) | BIT(16), priv->base + PWC_GPIO);
+ bitmap_zero(priv->ch_en_bits, 2);
+
+ priv->gp = rzv2m_pwc_gc;
+ priv->gp.parent = pdev->dev.parent;
+ priv->gp.fwnode = dev_fwnode(&pdev->dev);
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &priv->gp, priv);
+ if (ret)
+ return ret;
+
+ if (device_property_read_bool(&pdev->dev, "renesas,rzv2m-pwc-power"))
+ ret = devm_register_power_off_handler(&pdev->dev,
+ rzv2m_pwc_poweroff, priv);
+
+ return ret;
+}
+
+static const struct of_device_id rzv2m_pwc_of_match[] = {
+ { .compatible = "renesas,rzv2m-pwc" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzv2m_pwc_of_match);
+
+static struct platform_driver rzv2m_pwc_driver = {
+ .probe = rzv2m_pwc_probe,
+ .driver = {
+ .name = "rzv2m_pwc",
+ .of_match_table = of_match_ptr(rzv2m_pwc_of_match),
+ },
+};
+module_platform_driver(rzv2m_pwc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fabrizio Castro <castro.fabrizio.jz@renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/V2M PWC driver");
diff --git a/drivers/soc/renesas/r8a779g0-sysc.c b/drivers/soc/renesas/r8a779g0-sysc.c
index a452709f066d..b932eba1b804 100644
--- a/drivers/soc/renesas/r8a779g0-sysc.c
+++ b/drivers/soc/renesas/r8a779g0-sysc.c
@@ -37,6 +37,7 @@ static struct rcar_gen4_sysc_area r8a779g0_areas[] __initdata = {
{ "a3vip0", R8A779G0_PD_A3VIP0, R8A779G0_PD_ALWAYS_ON },
{ "a3vip1", R8A779G0_PD_A3VIP1, R8A779G0_PD_ALWAYS_ON },
{ "a3vip2", R8A779G0_PD_A3VIP2, R8A779G0_PD_ALWAYS_ON },
+ { "a3dul", R8A779G0_PD_A3DUL, R8A779G0_PD_ALWAYS_ON },
{ "a3isp0", R8A779G0_PD_A3ISP0, R8A779G0_PD_ALWAYS_ON },
{ "a3isp1", R8A779G0_PD_A3ISP1, R8A779G0_PD_ALWAYS_ON },
{ "a3ir", R8A779G0_PD_A3IR, R8A779G0_PD_ALWAYS_ON },
diff --git a/drivers/soc/sifive/Kconfig b/drivers/soc/sifive/Kconfig
index ed4c571f8771..e86870be34c9 100644
--- a/drivers/soc/sifive/Kconfig
+++ b/drivers/soc/sifive/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-if SOC_SIFIVE
+if SOC_SIFIVE || SOC_STARFIVE
config SIFIVE_CCACHE
bool "Sifive Composable Cache controller"
diff --git a/drivers/soc/starfive/Kconfig b/drivers/soc/starfive/Kconfig
new file mode 100644
index 000000000000..bdb96dc4c989
--- /dev/null
+++ b/drivers/soc/starfive/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config JH71XX_PMU
+ bool "Support PMU for StarFive JH71XX Soc"
+ depends on PM
+ depends on SOC_STARFIVE || COMPILE_TEST
+ default SOC_STARFIVE
+ select PM_GENERIC_DOMAINS
+ help
+ Say 'y' here to enable support power domain support.
+ In order to meet low power requirements, a Power Management Unit (PMU)
+ is designed for controlling power resources in StarFive JH71XX SoCs.
diff --git a/drivers/soc/starfive/Makefile b/drivers/soc/starfive/Makefile
new file mode 100644
index 000000000000..13b589d6b5f3
--- /dev/null
+++ b/drivers/soc/starfive/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_JH71XX_PMU) += jh71xx_pmu.o
diff --git a/drivers/soc/starfive/jh71xx_pmu.c b/drivers/soc/starfive/jh71xx_pmu.c
new file mode 100644
index 000000000000..7d5f50d71c0d
--- /dev/null
+++ b/drivers/soc/starfive/jh71xx_pmu.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * StarFive JH71XX PMU (Power Management Unit) Controller Driver
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <dt-bindings/power/starfive,jh7110-pmu.h>
+
+/* register offset */
+#define JH71XX_PMU_SW_TURN_ON_POWER 0x0C
+#define JH71XX_PMU_SW_TURN_OFF_POWER 0x10
+#define JH71XX_PMU_SW_ENCOURAGE 0x44
+#define JH71XX_PMU_TIMER_INT_MASK 0x48
+#define JH71XX_PMU_CURR_POWER_MODE 0x80
+#define JH71XX_PMU_EVENT_STATUS 0x88
+#define JH71XX_PMU_INT_STATUS 0x8C
+
+/* sw encourage cfg */
+#define JH71XX_PMU_SW_ENCOURAGE_EN_LO 0x05
+#define JH71XX_PMU_SW_ENCOURAGE_EN_HI 0x50
+#define JH71XX_PMU_SW_ENCOURAGE_DIS_LO 0x0A
+#define JH71XX_PMU_SW_ENCOURAGE_DIS_HI 0xA0
+#define JH71XX_PMU_SW_ENCOURAGE_ON 0xFF
+
+/* pmu int status */
+#define JH71XX_PMU_INT_SEQ_DONE BIT(0)
+#define JH71XX_PMU_INT_HW_REQ BIT(1)
+#define JH71XX_PMU_INT_SW_FAIL GENMASK(3, 2)
+#define JH71XX_PMU_INT_HW_FAIL GENMASK(5, 4)
+#define JH71XX_PMU_INT_PCH_FAIL GENMASK(8, 6)
+#define JH71XX_PMU_INT_ALL_MASK GENMASK(8, 0)
+
+/*
+ * The time required for switching power status is based on the time
+ * to turn on the largest domain's power, which is at microsecond level
+ */
+#define JH71XX_PMU_TIMEOUT_US 100
+
+struct jh71xx_domain_info {
+ const char * const name;
+ unsigned int flags;
+ u8 bit;
+};
+
+struct jh71xx_pmu_match_data {
+ const struct jh71xx_domain_info *domain_info;
+ int num_domains;
+};
+
+struct jh71xx_pmu {
+ struct device *dev;
+ const struct jh71xx_pmu_match_data *match_data;
+ void __iomem *base;
+ struct generic_pm_domain **genpd;
+ struct genpd_onecell_data genpd_data;
+ int irq;
+ spinlock_t lock; /* protects pmu reg */
+};
+
+struct jh71xx_pmu_dev {
+ const struct jh71xx_domain_info *domain_info;
+ struct jh71xx_pmu *pmu;
+ struct generic_pm_domain genpd;
+};
+
+static int jh71xx_pmu_get_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool *is_on)
+{
+ struct jh71xx_pmu *pmu = pmd->pmu;
+
+ if (!mask)
+ return -EINVAL;
+
+ *is_on = readl(pmu->base + JH71XX_PMU_CURR_POWER_MODE) & mask;
+
+ return 0;
+}
+
+static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
+{
+ struct jh71xx_pmu *pmu = pmd->pmu;
+ unsigned long flags;
+ u32 val;
+ u32 mode;
+ u32 encourage_lo;
+ u32 encourage_hi;
+ bool is_on;
+ int ret;
+
+ ret = jh71xx_pmu_get_state(pmd, mask, &is_on);
+ if (ret) {
+ dev_dbg(pmu->dev, "unable to get current state for %s\n",
+ pmd->genpd.name);
+ return ret;
+ }
+
+ if (is_on == on) {
+ dev_dbg(pmu->dev, "pm domain [%s] is already %sable status.\n",
+ pmd->genpd.name, on ? "en" : "dis");
+ return 0;
+ }
+
+ spin_lock_irqsave(&pmu->lock, flags);
+
+ /*
+ * The PMU accepts software encourage to switch power mode in the following 2 steps:
+ *
+ * 1.Configure the register SW_TURN_ON_POWER (offset 0x0c) by writing 1 to
+ * the bit corresponding to the power domain that will be turned on
+ * and writing 0 to the others.
+ * Likewise, configure the register SW_TURN_OFF_POWER (offset 0x10) by
+ * writing 1 to the bit corresponding to the power domain that will be
+ * turned off and writing 0 to the others.
+ */
+ if (on) {
+ mode = JH71XX_PMU_SW_TURN_ON_POWER;
+ encourage_lo = JH71XX_PMU_SW_ENCOURAGE_EN_LO;
+ encourage_hi = JH71XX_PMU_SW_ENCOURAGE_EN_HI;
+ } else {
+ mode = JH71XX_PMU_SW_TURN_OFF_POWER;
+ encourage_lo = JH71XX_PMU_SW_ENCOURAGE_DIS_LO;
+ encourage_hi = JH71XX_PMU_SW_ENCOURAGE_DIS_HI;
+ }
+
+ writel(mask, pmu->base + mode);
+
+ /*
+ * 2.Write SW encourage command sequence to the Software Encourage Reg (offset 0x44)
+ * First write SW_MODE_ENCOURAGE_ON to JH71XX_PMU_SW_ENCOURAGE. This will reset
+ * the state machine which parses the command sequence. This register must be
+ * written every time software wants to power on/off a domain.
+ * Then write the lower bits of the command sequence, followed by the upper
+ * bits. The sequence differs between powering on & off a domain.
+ */
+ writel(JH71XX_PMU_SW_ENCOURAGE_ON, pmu->base + JH71XX_PMU_SW_ENCOURAGE);
+ writel(encourage_lo, pmu->base + JH71XX_PMU_SW_ENCOURAGE);
+ writel(encourage_hi, pmu->base + JH71XX_PMU_SW_ENCOURAGE);
+
+ spin_unlock_irqrestore(&pmu->lock, flags);
+
+ /* Wait for the power domain bit to be enabled / disabled */
+ if (on) {
+ ret = readl_poll_timeout_atomic(pmu->base + JH71XX_PMU_CURR_POWER_MODE,
+ val, val & mask,
+ 1, JH71XX_PMU_TIMEOUT_US);
+ } else {
+ ret = readl_poll_timeout_atomic(pmu->base + JH71XX_PMU_CURR_POWER_MODE,
+ val, !(val & mask),
+ 1, JH71XX_PMU_TIMEOUT_US);
+ }
+
+ if (ret) {
+ dev_err(pmu->dev, "%s: failed to power %s\n",
+ pmd->genpd.name, on ? "on" : "off");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int jh71xx_pmu_on(struct generic_pm_domain *genpd)
+{
+ struct jh71xx_pmu_dev *pmd = container_of(genpd,
+ struct jh71xx_pmu_dev, genpd);
+ u32 pwr_mask = BIT(pmd->domain_info->bit);
+
+ return jh71xx_pmu_set_state(pmd, pwr_mask, true);
+}
+
+static int jh71xx_pmu_off(struct generic_pm_domain *genpd)
+{
+ struct jh71xx_pmu_dev *pmd = container_of(genpd,
+ struct jh71xx_pmu_dev, genpd);
+ u32 pwr_mask = BIT(pmd->domain_info->bit);
+
+ return jh71xx_pmu_set_state(pmd, pwr_mask, false);
+}
+
+static void jh71xx_pmu_int_enable(struct jh71xx_pmu *pmu, u32 mask, bool enable)
+{
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu->lock, flags);
+ val = readl(pmu->base + JH71XX_PMU_TIMER_INT_MASK);
+
+ if (enable)
+ val &= ~mask;
+ else
+ val |= mask;
+
+ writel(val, pmu->base + JH71XX_PMU_TIMER_INT_MASK);
+ spin_unlock_irqrestore(&pmu->lock, flags);
+}
+
+static irqreturn_t jh71xx_pmu_interrupt(int irq, void *data)
+{
+ struct jh71xx_pmu *pmu = data;
+ u32 val;
+
+ val = readl(pmu->base + JH71XX_PMU_INT_STATUS);
+
+ if (val & JH71XX_PMU_INT_SEQ_DONE)
+ dev_dbg(pmu->dev, "sequence done.\n");
+ if (val & JH71XX_PMU_INT_HW_REQ)
+ dev_dbg(pmu->dev, "hardware encourage requestion.\n");
+ if (val & JH71XX_PMU_INT_SW_FAIL)
+ dev_err(pmu->dev, "software encourage fail.\n");
+ if (val & JH71XX_PMU_INT_HW_FAIL)
+ dev_err(pmu->dev, "hardware encourage fail.\n");
+ if (val & JH71XX_PMU_INT_PCH_FAIL)
+ dev_err(pmu->dev, "p-channel fail event.\n");
+
+ /* clear interrupts */
+ writel(val, pmu->base + JH71XX_PMU_INT_STATUS);
+ writel(val, pmu->base + JH71XX_PMU_EVENT_STATUS);
+
+ return IRQ_HANDLED;
+}
+
+static int jh71xx_pmu_init_domain(struct jh71xx_pmu *pmu, int index)
+{
+ struct jh71xx_pmu_dev *pmd;
+ u32 pwr_mask;
+ int ret;
+ bool is_on = false;
+
+ pmd = devm_kzalloc(pmu->dev, sizeof(*pmd), GFP_KERNEL);
+ if (!pmd)
+ return -ENOMEM;
+
+ pmd->domain_info = &pmu->match_data->domain_info[index];
+ pmd->pmu = pmu;
+ pwr_mask = BIT(pmd->domain_info->bit);
+
+ pmd->genpd.name = pmd->domain_info->name;
+ pmd->genpd.flags = pmd->domain_info->flags;
+
+ ret = jh71xx_pmu_get_state(pmd, pwr_mask, &is_on);
+ if (ret)
+ dev_warn(pmu->dev, "unable to get current state for %s\n",
+ pmd->genpd.name);
+
+ pmd->genpd.power_on = jh71xx_pmu_on;
+ pmd->genpd.power_off = jh71xx_pmu_off;
+ pm_genpd_init(&pmd->genpd, NULL, !is_on);
+
+ pmu->genpd_data.domains[index] = &pmd->genpd;
+
+ return 0;
+}
+
+static int jh71xx_pmu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct jh71xx_pmu_match_data *match_data;
+ struct jh71xx_pmu *pmu;
+ unsigned int i;
+ int ret;
+
+ pmu = devm_kzalloc(dev, sizeof(*pmu), GFP_KERNEL);
+ if (!pmu)
+ return -ENOMEM;
+
+ pmu->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pmu->base))
+ return PTR_ERR(pmu->base);
+
+ pmu->irq = platform_get_irq(pdev, 0);
+ if (pmu->irq < 0)
+ return pmu->irq;
+
+ ret = devm_request_irq(dev, pmu->irq, jh71xx_pmu_interrupt,
+ 0, pdev->name, pmu);
+ if (ret)
+ dev_err(dev, "failed to request irq\n");
+
+ match_data = of_device_get_match_data(dev);
+ if (!match_data)
+ return -EINVAL;
+
+ pmu->genpd = devm_kcalloc(dev, match_data->num_domains,
+ sizeof(struct generic_pm_domain *),
+ GFP_KERNEL);
+ if (!pmu->genpd)
+ return -ENOMEM;
+
+ pmu->dev = dev;
+ pmu->match_data = match_data;
+ pmu->genpd_data.domains = pmu->genpd;
+ pmu->genpd_data.num_domains = match_data->num_domains;
+
+ for (i = 0; i < match_data->num_domains; i++) {
+ ret = jh71xx_pmu_init_domain(pmu, i);
+ if (ret) {
+ dev_err(dev, "failed to initialize power domain\n");
+ return ret;
+ }
+ }
+
+ spin_lock_init(&pmu->lock);
+ jh71xx_pmu_int_enable(pmu, JH71XX_PMU_INT_ALL_MASK & ~JH71XX_PMU_INT_PCH_FAIL, true);
+
+ ret = of_genpd_add_provider_onecell(np, &pmu->genpd_data);
+ if (ret) {
+ dev_err(dev, "failed to register genpd driver: %d\n", ret);
+ return ret;
+ }
+
+ dev_dbg(dev, "registered %u power domains\n", i);
+
+ return 0;
+}
+
+static const struct jh71xx_domain_info jh7110_power_domains[] = {
+ [JH7110_PD_SYSTOP] = {
+ .name = "SYSTOP",
+ .bit = 0,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ },
+ [JH7110_PD_CPU] = {
+ .name = "CPU",
+ .bit = 1,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ },
+ [JH7110_PD_GPUA] = {
+ .name = "GPUA",
+ .bit = 2,
+ },
+ [JH7110_PD_VDEC] = {
+ .name = "VDEC",
+ .bit = 3,
+ },
+ [JH7110_PD_VOUT] = {
+ .name = "VOUT",
+ .bit = 4,
+ },
+ [JH7110_PD_ISP] = {
+ .name = "ISP",
+ .bit = 5,
+ },
+ [JH7110_PD_VENC] = {
+ .name = "VENC",
+ .bit = 6,
+ },
+};
+
+static const struct jh71xx_pmu_match_data jh7110_pmu = {
+ .num_domains = ARRAY_SIZE(jh7110_power_domains),
+ .domain_info = jh7110_power_domains,
+};
+
+static const struct of_device_id jh71xx_pmu_of_match[] = {
+ {
+ .compatible = "starfive,jh7110-pmu",
+ .data = (void *)&jh7110_pmu,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct platform_driver jh71xx_pmu_driver = {
+ .probe = jh71xx_pmu_probe,
+ .driver = {
+ .name = "jh71xx-pmu",
+ .of_match_table = jh71xx_pmu_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(jh71xx_pmu_driver);
+
+MODULE_AUTHOR("Walker Chen <walker.chen@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JH71XX PMU Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 8aecbc9b1976..c5070914fc6a 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -19,3 +19,12 @@ config SUNXI_SRAM
Say y here to enable the SRAM controller support. This
device is responsible on mapping the SRAM in the sunXi SoCs
whether to the CPU/DMA, or to the devices.
+
+config SUN20I_PPU
+ bool "Allwinner D1 PPU power domain driver"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on PM
+ select PM_GENERIC_DOMAINS
+ help
+ Say y to enable the PPU power domain driver. This saves power
+ when certain peripherals, such as the video engine, are idle.
diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
index 549159571d4f..90ff2ebe7655 100644
--- a/drivers/soc/sunxi/Makefile
+++ b/drivers/soc/sunxi/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_SUNXI_MBUS) += sunxi_mbus.o
obj-$(CONFIG_SUNXI_SRAM) += sunxi_sram.o
+obj-$(CONFIG_SUN20I_PPU) += sun20i-ppu.o
diff --git a/drivers/soc/sunxi/sun20i-ppu.c b/drivers/soc/sunxi/sun20i-ppu.c
new file mode 100644
index 000000000000..98cb41d36560
--- /dev/null
+++ b/drivers/soc/sunxi/sun20i-ppu.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset.h>
+
+#define PD_STATE_ON 1
+#define PD_STATE_OFF 2
+
+#define PD_RSTN_REG 0x00
+#define PD_CLK_GATE_REG 0x04
+#define PD_PWROFF_GATE_REG 0x08
+#define PD_PSW_ON_REG 0x0c
+#define PD_PSW_OFF_REG 0x10
+#define PD_PSW_DELAY_REG 0x14
+#define PD_OFF_DELAY_REG 0x18
+#define PD_ON_DELAY_REG 0x1c
+#define PD_COMMAND_REG 0x20
+#define PD_STATUS_REG 0x24
+#define PD_STATUS_COMPLETE BIT(1)
+#define PD_STATUS_BUSY BIT(3)
+#define PD_STATUS_STATE GENMASK(17, 16)
+#define PD_ACTIVE_CTRL_REG 0x2c
+#define PD_GATE_STATUS_REG 0x30
+#define PD_RSTN_STATUS BIT(0)
+#define PD_CLK_GATE_STATUS BIT(1)
+#define PD_PWROFF_GATE_STATUS BIT(2)
+#define PD_PSW_STATUS_REG 0x34
+
+#define PD_REGS_SIZE 0x80
+
+struct sun20i_ppu_desc {
+ const char *const *names;
+ unsigned int num_domains;
+};
+
+struct sun20i_ppu_pd {
+ struct generic_pm_domain genpd;
+ void __iomem *base;
+};
+
+#define to_sun20i_ppu_pd(_genpd) \
+ container_of(_genpd, struct sun20i_ppu_pd, genpd)
+
+static bool sun20i_ppu_pd_is_on(const struct sun20i_ppu_pd *pd)
+{
+ u32 status = readl(pd->base + PD_STATUS_REG);
+
+ return FIELD_GET(PD_STATUS_STATE, status) == PD_STATE_ON;
+}
+
+static int sun20i_ppu_pd_set_power(const struct sun20i_ppu_pd *pd, bool power_on)
+{
+ u32 state, status;
+ int ret;
+
+ if (sun20i_ppu_pd_is_on(pd) == power_on)
+ return 0;
+
+ /* Wait for the power controller to be idle. */
+ ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+ !(status & PD_STATUS_BUSY), 100, 1000);
+ if (ret)
+ return ret;
+
+ state = power_on ? PD_STATE_ON : PD_STATE_OFF;
+ writel(state, pd->base + PD_COMMAND_REG);
+
+ /* Wait for the state transition to complete. */
+ ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+ FIELD_GET(PD_STATUS_STATE, status) == state &&
+ (status & PD_STATUS_COMPLETE), 100, 1000);
+ if (ret)
+ return ret;
+
+ /* Clear the completion flag. */
+ writel(status, pd->base + PD_STATUS_REG);
+
+ return 0;
+}
+
+static int sun20i_ppu_pd_power_on(struct generic_pm_domain *genpd)
+{
+ const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+ return sun20i_ppu_pd_set_power(pd, true);
+}
+
+static int sun20i_ppu_pd_power_off(struct generic_pm_domain *genpd)
+{
+ const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+ return sun20i_ppu_pd_set_power(pd, false);
+}
+
+static int sun20i_ppu_probe(struct platform_device *pdev)
+{
+ const struct sun20i_ppu_desc *desc;
+ struct device *dev = &pdev->dev;
+ struct genpd_onecell_data *ppu;
+ struct sun20i_ppu_pd *pds;
+ struct reset_control *rst;
+ void __iomem *base;
+ struct clk *clk;
+ int ret;
+
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -EINVAL;
+
+ pds = devm_kcalloc(dev, desc->num_domains, sizeof(*pds), GFP_KERNEL);
+ if (!pds)
+ return -ENOMEM;
+
+ ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
+ if (!ppu)
+ return -ENOMEM;
+
+ ppu->domains = devm_kcalloc(dev, desc->num_domains,
+ sizeof(*ppu->domains), GFP_KERNEL);
+ if (!ppu->domains)
+ return -ENOMEM;
+
+ ppu->num_domains = desc->num_domains;
+ platform_set_drvdata(pdev, ppu);
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(rst))
+ return PTR_ERR(rst);
+
+ ret = reset_control_deassert(rst);
+ if (ret)
+ return ret;
+
+ for (unsigned int i = 0; i < ppu->num_domains; ++i) {
+ struct sun20i_ppu_pd *pd = &pds[i];
+
+ pd->genpd.name = desc->names[i];
+ pd->genpd.power_off = sun20i_ppu_pd_power_off;
+ pd->genpd.power_on = sun20i_ppu_pd_power_on;
+ pd->base = base + PD_REGS_SIZE * i;
+
+ ret = pm_genpd_init(&pd->genpd, NULL, sun20i_ppu_pd_is_on(pd));
+ if (ret) {
+ dev_warn(dev, "Failed to add '%s' domain: %d\n",
+ pd->genpd.name, ret);
+ continue;
+ }
+
+ ppu->domains[i] = &pd->genpd;
+ }
+
+ ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
+ if (ret)
+ dev_warn(dev, "Failed to add provider: %d\n", ret);
+
+ return 0;
+}
+
+static const char *const sun20i_d1_ppu_pd_names[] = {
+ "CPU",
+ "VE",
+ "DSP",
+};
+
+static const struct sun20i_ppu_desc sun20i_d1_ppu_desc = {
+ .names = sun20i_d1_ppu_pd_names,
+ .num_domains = ARRAY_SIZE(sun20i_d1_ppu_pd_names),
+};
+
+static const struct of_device_id sun20i_ppu_of_match[] = {
+ {
+ .compatible = "allwinner,sun20i-d1-ppu",
+ .data = &sun20i_d1_ppu_desc,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun20i_ppu_of_match);
+
+static struct platform_driver sun20i_ppu_driver = {
+ .probe = sun20i_ppu_probe,
+ .driver = {
+ .name = "sun20i-ppu",
+ .of_match_table = sun20i_ppu_of_match,
+ /* Power domains cannot be removed while they are in use. */
+ .suppress_bind_attrs = true,
+ },
+};
+module_platform_driver(sun20i_ppu_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Allwinner D1 PPU power domain driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
index 92f9186c1c42..f09918c59042 100644
--- a/drivers/soc/sunxi/sunxi_sram.c
+++ b/drivers/soc/sunxi/sunxi_sram.c
@@ -120,6 +120,9 @@ static int sunxi_sram_show(struct seq_file *s, void *data)
seq_puts(s, "--------------------\n\n");
for_each_child_of_node(sram_dev->of_node, sram_node) {
+ if (!of_device_is_compatible(sram_node, "mmio-sram"))
+ continue;
+
sram_addr_p = of_get_address(sram_node, 0, NULL, NULL);
seq_printf(s, "sram@%08x\n",
diff --git a/drivers/soc/xilinx/xlnx_event_manager.c b/drivers/soc/xilinx/xlnx_event_manager.c
index 2de082765bef..c76381899ef4 100644
--- a/drivers/soc/xilinx/xlnx_event_manager.c
+++ b/drivers/soc/xilinx/xlnx_event_manager.c
@@ -116,8 +116,10 @@ static int xlnx_add_cb_for_notify_event(const u32 node_id, const u32 event, cons
INIT_LIST_HEAD(&eve_data->cb_list_head);
cb_data = kmalloc(sizeof(*cb_data), GFP_KERNEL);
- if (!cb_data)
+ if (!cb_data) {
+ kfree(eve_data);
return -ENOMEM;
+ }
cb_data->eve_cb = cb_fun;
cb_data->agent_data = data;
diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c
index fcce2433bd6d..69d03ad4cf1e 100644
--- a/drivers/soc/xilinx/zynqmp_pm_domains.c
+++ b/drivers/soc/xilinx/zynqmp_pm_domains.c
@@ -227,7 +227,7 @@ static struct generic_pm_domain *zynqmp_gpd_xlate
goto done;
}
- /**
+ /*
* Add index in empty node_id of power domain list as no existing
* power domain found for current index.
*/
diff --git a/drivers/spi/spi-rpc-if.c b/drivers/spi/spi-rpc-if.c
index 24ec1c83f379..ec0904faf3a1 100644
--- a/drivers/spi/spi-rpc-if.c
+++ b/drivers/spi/spi-rpc-if.c
@@ -58,7 +58,7 @@ static void rpcif_spi_mem_prepare(struct spi_device *spi_dev,
rpc_op.data.dir = RPCIF_NO_DATA;
}
- rpcif_prepare(rpc, &rpc_op, offs, len);
+ rpcif_prepare(rpc->dev, &rpc_op, offs, len);
}
static bool rpcif_spi_mem_supports_op(struct spi_mem *mem,
@@ -86,7 +86,7 @@ static ssize_t rpcif_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
rpcif_spi_mem_prepare(desc->mem->spi, &desc->info.op_tmpl, &offs, &len);
- return rpcif_dirmap_read(rpc, offs, len, buf);
+ return rpcif_dirmap_read(rpc->dev, offs, len, buf);
}
static int rpcif_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
@@ -117,7 +117,7 @@ static int rpcif_spi_mem_exec_op(struct spi_mem *mem,
rpcif_spi_mem_prepare(mem->spi, op, NULL, NULL);
- return rpcif_manual_xfer(rpc);
+ return rpcif_manual_xfer(rpc->dev);
}
static const struct spi_controller_mem_ops rpcif_spi_mem_ops = {
@@ -147,7 +147,7 @@ static int rpcif_spi_probe(struct platform_device *pdev)
ctlr->dev.of_node = parent->of_node;
- rpcif_enable_rpm(rpc);
+ pm_runtime_enable(rpc->dev);
ctlr->num_chipselect = 1;
ctlr->mem_ops = &rpcif_spi_mem_ops;
@@ -156,7 +156,7 @@ static int rpcif_spi_probe(struct platform_device *pdev)
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD;
ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX;
- error = rpcif_hw_init(rpc, false);
+ error = rpcif_hw_init(rpc->dev, false);
if (error)
goto out_disable_rpm;
@@ -169,7 +169,7 @@ static int rpcif_spi_probe(struct platform_device *pdev)
return 0;
out_disable_rpm:
- rpcif_disable_rpm(rpc);
+ pm_runtime_disable(rpc->dev);
return error;
}
@@ -179,7 +179,7 @@ static int rpcif_spi_remove(struct platform_device *pdev)
struct rpcif *rpc = spi_controller_get_devdata(ctlr);
spi_unregister_controller(ctlr);
- rpcif_disable_rpm(rpc);
+ pm_runtime_disable(rpc->dev);
return 0;
}
diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index 4122a51e9874..f6edb12ec004 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -10,7 +10,7 @@
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#define LMH_NODE_DCVS 0x44435653
#define LMH_CLUSTER0_NODE_ID 0x6370302D
diff --git a/drivers/ufs/host/ufs-qcom-ice.c b/drivers/ufs/host/ufs-qcom-ice.c
index 62387ccd5b30..453978877ae9 100644
--- a/drivers/ufs/host/ufs-qcom-ice.c
+++ b/drivers/ufs/host/ufs-qcom-ice.c
@@ -8,7 +8,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <linux/qcom_scm.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include "ufs-qcom.h"
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index b54f470e0d03..1f971c880dde 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -899,6 +899,7 @@ ssize_t debugfs_read_file_str(struct file *file, char __user *user_buf,
return ret;
}
+EXPORT_SYMBOL_GPL(debugfs_create_str);
static ssize_t debugfs_write_file_str(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index f7aef3f310d7..aa95439708dc 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -11,40 +11,70 @@
* The MSM chipset and hardware revision used by Qualcomm bootloaders, DTS for
* older chipsets (qcom,msm-id) and in socinfo driver:
*/
+#define QCOM_ID_MSM8260 70
+#define QCOM_ID_MSM8660 71
+#define QCOM_ID_APQ8060 86
#define QCOM_ID_MSM8960 87
#define QCOM_ID_APQ8064 109
+#define QCOM_ID_MSM8930 116
+#define QCOM_ID_MSM8630 117
+#define QCOM_ID_MSM8230 118
+#define QCOM_ID_APQ8030 119
+#define QCOM_ID_MSM8627 120
+#define QCOM_ID_MSM8227 121
#define QCOM_ID_MSM8660A 122
#define QCOM_ID_MSM8260A 123
#define QCOM_ID_APQ8060A 124
#define QCOM_ID_MSM8974 126
+#define QCOM_ID_MSM8225 127
+#define QCOM_ID_MSM8625 129
#define QCOM_ID_MPQ8064 130
#define QCOM_ID_MSM8960AB 138
#define QCOM_ID_APQ8060AB 139
#define QCOM_ID_MSM8260AB 140
#define QCOM_ID_MSM8660AB 141
+#define QCOM_ID_MSM8930AA 142
+#define QCOM_ID_MSM8630AA 143
+#define QCOM_ID_MSM8230AA 144
#define QCOM_ID_MSM8626 145
#define QCOM_ID_MSM8610 147
#define QCOM_ID_APQ8064AB 153
+#define QCOM_ID_MSM8930AB 154
+#define QCOM_ID_MSM8630AB 155
+#define QCOM_ID_MSM8230AB 156
+#define QCOM_ID_APQ8030AB 157
#define QCOM_ID_MSM8226 158
#define QCOM_ID_MSM8526 159
+#define QCOM_ID_APQ8030AA 160
#define QCOM_ID_MSM8110 161
#define QCOM_ID_MSM8210 162
#define QCOM_ID_MSM8810 163
#define QCOM_ID_MSM8212 164
#define QCOM_ID_MSM8612 165
#define QCOM_ID_MSM8112 166
+#define QCOM_ID_MSM8125 167
#define QCOM_ID_MSM8225Q 168
#define QCOM_ID_MSM8625Q 169
#define QCOM_ID_MSM8125Q 170
#define QCOM_ID_APQ8064AA 172
#define QCOM_ID_APQ8084 178
+#define QCOM_ID_MSM8130 179
+#define QCOM_ID_MSM8130AA 180
+#define QCOM_ID_MSM8130AB 181
+#define QCOM_ID_MSM8627AA 182
+#define QCOM_ID_MSM8227AA 183
#define QCOM_ID_APQ8074 184
#define QCOM_ID_MSM8274 185
#define QCOM_ID_MSM8674 186
+#define QCOM_ID_MDM9635 187
#define QCOM_ID_MSM8974PRO_AC 194
#define QCOM_ID_MSM8126 198
#define QCOM_ID_APQ8026 199
#define QCOM_ID_MSM8926 200
+#define QCOM_ID_IPQ8062 201
+#define QCOM_ID_IPQ8064 202
+#define QCOM_ID_IPQ8066 203
+#define QCOM_ID_IPQ8068 204
#define QCOM_ID_MSM8326 205
#define QCOM_ID_MSM8916 206
#define QCOM_ID_MSM8994 207
@@ -68,34 +98,74 @@
#define QCOM_ID_MSM8510 225
#define QCOM_ID_MSM8512 226
#define QCOM_ID_MSM8936 233
+#define QCOM_ID_MDM9640 234
#define QCOM_ID_MSM8939 239
#define QCOM_ID_APQ8036 240
#define QCOM_ID_APQ8039 241
+#define QCOM_ID_MSM8236 242
+#define QCOM_ID_MSM8636 243
+#define QCOM_ID_MSM8909 245
#define QCOM_ID_MSM8996 246
#define QCOM_ID_APQ8016 247
#define QCOM_ID_MSM8216 248
#define QCOM_ID_MSM8116 249
#define QCOM_ID_MSM8616 250
#define QCOM_ID_MSM8992 251
+#define QCOM_ID_APQ8092 252
#define QCOM_ID_APQ8094 253
+#define QCOM_ID_MSM8209 258
+#define QCOM_ID_MSM8208 259
+#define QCOM_ID_MDM9209 260
+#define QCOM_ID_MDM9309 261
+#define QCOM_ID_MDM9609 262
+#define QCOM_ID_MSM8239 263
+#define QCOM_ID_MSM8952 264
+#define QCOM_ID_APQ8009 265
#define QCOM_ID_MSM8956 266
+#define QCOM_ID_MSM8929 268
+#define QCOM_ID_MSM8629 269
+#define QCOM_ID_MSM8229 270
+#define QCOM_ID_APQ8029 271
+#define QCOM_ID_APQ8056 274
+#define QCOM_ID_MSM8609 275
+#define QCOM_ID_APQ8076 277
#define QCOM_ID_MSM8976 278
+#define QCOM_ID_MDM9650 279
+#define QCOM_ID_IPQ8065 280
+#define QCOM_ID_IPQ8069 281
+#define QCOM_ID_MDM9655 283
+#define QCOM_ID_MDM9250 284
+#define QCOM_ID_MDM9255 285
+#define QCOM_ID_MDM9350 286
+#define QCOM_ID_APQ8052 289
#define QCOM_ID_MDM9607 290
#define QCOM_ID_APQ8096 291
#define QCOM_ID_MSM8998 292
#define QCOM_ID_MSM8953 293
+#define QCOM_ID_MSM8937 294
+#define QCOM_ID_APQ8037 295
#define QCOM_ID_MDM8207 296
#define QCOM_ID_MDM9207 297
#define QCOM_ID_MDM9307 298
#define QCOM_ID_MDM9628 299
+#define QCOM_ID_MSM8909W 300
+#define QCOM_ID_APQ8009W 301
+#define QCOM_ID_MSM8996L 302
+#define QCOM_ID_MSM8917 303
#define QCOM_ID_APQ8053 304
#define QCOM_ID_MSM8996SG 305
+#define QCOM_ID_APQ8017 307
+#define QCOM_ID_MSM8217 308
+#define QCOM_ID_MSM8617 309
#define QCOM_ID_MSM8996AU 310
#define QCOM_ID_APQ8096AU 311
#define QCOM_ID_APQ8096SG 312
+#define QCOM_ID_MSM8940 313
+#define QCOM_ID_SDX201 314
#define QCOM_ID_SDM660 317
#define QCOM_ID_SDM630 318
#define QCOM_ID_APQ8098 319
+#define QCOM_ID_MSM8920 320
#define QCOM_ID_SDM845 321
#define QCOM_ID_MDM9206 322
#define QCOM_ID_IPQ8074 323
@@ -103,6 +173,8 @@
#define QCOM_ID_SDM658 325
#define QCOM_ID_SDA658 326
#define QCOM_ID_SDA630 327
+#define QCOM_ID_MSM8905 331
+#define QCOM_ID_SDX202 333
#define QCOM_ID_SDM450 338
#define QCOM_ID_SM8150 339
#define QCOM_ID_SDA845 341
@@ -114,10 +186,15 @@
#define QCOM_ID_SDM632 349
#define QCOM_ID_SDA632 350
#define QCOM_ID_SDA450 351
+#define QCOM_ID_SDM439 353
+#define QCOM_ID_SDM429 354
#define QCOM_ID_SM8250 356
#define QCOM_ID_SA8155 362
+#define QCOM_ID_SDA439 363
+#define QCOM_ID_SDA429 364
#define QCOM_ID_IPQ8070 375
#define QCOM_ID_IPQ8071 376
+#define QCOM_ID_QM215 386
#define QCOM_ID_IPQ8072A 389
#define QCOM_ID_IPQ8074A 390
#define QCOM_ID_IPQ8076A 391
@@ -127,11 +204,14 @@
#define QCOM_ID_IPQ8071A 396
#define QCOM_ID_IPQ6018 402
#define QCOM_ID_IPQ6028 403
+#define QCOM_ID_SDM429W 416
#define QCOM_ID_SM4250 417
#define QCOM_ID_IPQ6000 421
#define QCOM_ID_IPQ6010 422
#define QCOM_ID_SC7180 425
#define QCOM_ID_SM6350 434
+#define QCOM_ID_QCM2150 436
+#define QCOM_ID_SDA429W 437
#define QCOM_ID_SM8350 439
#define QCOM_ID_SM6115 444
#define QCOM_ID_SC8280XP 449
@@ -155,6 +235,8 @@
#define QCOM_ID_QRU1032 588
#define QCOM_ID_QRU1052 589
#define QCOM_ID_QRU1062 590
+#define QCOM_ID_IPQ5332 592
+#define QCOM_ID_IPQ5322 593
/*
* The board type and revision information, used by Qualcomm bootloaders and
@@ -165,6 +247,7 @@
#define QCOM_BOARD_ID_MTP 8
#define QCOM_BOARD_ID_DRAGONBOARD 10
+#define QCOM_BOARD_ID_QRD 11
#define QCOM_BOARD_ID_SBC 24
#endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */
diff --git a/include/dt-bindings/firmware/qcom,scm.h b/include/dt-bindings/firmware/qcom,scm.h
new file mode 100644
index 000000000000..1a4e68fa0744
--- /dev/null
+++ b/include/dt-bindings/firmware/qcom,scm.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ */
+
+#ifndef _DT_BINDINGS_FIRMWARE_QCOM_SCM_H
+#define _DT_BINDINGS_FIRMWARE_QCOM_SCM_H
+
+#define QCOM_SCM_VMID_HLOS 0x3
+#define QCOM_SCM_VMID_MSS_MSA 0xF
+#define QCOM_SCM_VMID_WLAN 0x18
+#define QCOM_SCM_VMID_WLAN_CE 0x19
+#define QCOM_SCM_VMID_NAV 0x2B
+
+#endif
diff --git a/include/dt-bindings/power/allwinner,sun20i-d1-ppu.h b/include/dt-bindings/power/allwinner,sun20i-d1-ppu.h
new file mode 100644
index 000000000000..23cfb57256d6
--- /dev/null
+++ b/include/dt-bindings/power/allwinner,sun20i-d1-ppu.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_POWER_SUN20I_D1_PPU_H_
+#define _DT_BINDINGS_POWER_SUN20I_D1_PPU_H_
+
+#define PD_CPU 0
+#define PD_VE 1
+#define PD_DSP 2
+
+#endif /* _DT_BINDINGS_POWER_SUN20I_D1_PPU_H_ */
diff --git a/include/dt-bindings/power/mediatek,mt8188-power.h b/include/dt-bindings/power/mediatek,mt8188-power.h
new file mode 100644
index 000000000000..57e75cf3aa2c
--- /dev/null
+++ b/include/dt-bindings/power/mediatek,mt8188-power.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Garmin Chang <garmin.chang@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT8188_POWER_H
+#define _DT_BINDINGS_POWER_MT8188_POWER_H
+
+#define MT8188_POWER_DOMAIN_MFG0 0
+#define MT8188_POWER_DOMAIN_MFG1 1
+#define MT8188_POWER_DOMAIN_MFG2 2
+#define MT8188_POWER_DOMAIN_MFG3 3
+#define MT8188_POWER_DOMAIN_MFG4 4
+#define MT8188_POWER_DOMAIN_PEXTP_MAC_P0 5
+#define MT8188_POWER_DOMAIN_PEXTP_PHY_TOP 6
+#define MT8188_POWER_DOMAIN_CSIRX_TOP 7
+#define MT8188_POWER_DOMAIN_ETHER 8
+#define MT8188_POWER_DOMAIN_HDMI_TX 9
+#define MT8188_POWER_DOMAIN_ADSP_AO 10
+#define MT8188_POWER_DOMAIN_ADSP_INFRA 11
+#define MT8188_POWER_DOMAIN_ADSP 12
+#define MT8188_POWER_DOMAIN_AUDIO 13
+#define MT8188_POWER_DOMAIN_AUDIO_ASRC 14
+#define MT8188_POWER_DOMAIN_VPPSYS0 15
+#define MT8188_POWER_DOMAIN_VDOSYS0 16
+#define MT8188_POWER_DOMAIN_VDOSYS1 17
+#define MT8188_POWER_DOMAIN_DP_TX 18
+#define MT8188_POWER_DOMAIN_EDP_TX 19
+#define MT8188_POWER_DOMAIN_VPPSYS1 20
+#define MT8188_POWER_DOMAIN_WPE 21
+#define MT8188_POWER_DOMAIN_VDEC0 22
+#define MT8188_POWER_DOMAIN_VDEC1 23
+#define MT8188_POWER_DOMAIN_VENC 24
+#define MT8188_POWER_DOMAIN_IMG_VCORE 25
+#define MT8188_POWER_DOMAIN_IMG_MAIN 26
+#define MT8188_POWER_DOMAIN_DIP 27
+#define MT8188_POWER_DOMAIN_IPE 28
+#define MT8188_POWER_DOMAIN_CAM_VCORE 29
+#define MT8188_POWER_DOMAIN_CAM_MAIN 30
+#define MT8188_POWER_DOMAIN_CAM_SUBA 31
+#define MT8188_POWER_DOMAIN_CAM_SUBB 32
+
+#endif /* _DT_BINDINGS_POWER_MT8188_POWER_H */
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
index 278de6df425e..1bf8e87ecd7e 100644
--- a/include/dt-bindings/power/qcom-rpmpd.h
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -4,6 +4,25 @@
#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H
#define _DT_BINDINGS_POWER_QCOM_RPMPD_H
+/* SA8775P Power Domain Indexes */
+#define SA8775P_CX 0
+#define SA8775P_CX_AO 1
+#define SA8775P_DDR 2
+#define SA8775P_EBI 3
+#define SA8775P_GFX 4
+#define SA8775P_LCX 5
+#define SA8775P_LMX 6
+#define SA8775P_MMCX 7
+#define SA8775P_MMCX_AO 8
+#define SA8775P_MSS 9
+#define SA8775P_MX 10
+#define SA8775P_MX_AO 11
+#define SA8775P_MXC 12
+#define SA8775P_MXC_AO 13
+#define SA8775P_NSP0 14
+#define SA8775P_NSP1 15
+#define SA8775P_XO 16
+
/* SDM670 Power Domain Indexes */
#define SDM670_MX 0
#define SDM670_MX_AO 1
@@ -192,6 +211,7 @@
#define RPMH_REGULATOR_LEVEL_MIN_SVS 48
#define RPMH_REGULATOR_LEVEL_LOW_SVS_D1 56
#define RPMH_REGULATOR_LEVEL_LOW_SVS 64
+#define RPMH_REGULATOR_LEVEL_LOW_SVS_L1 80
#define RPMH_REGULATOR_LEVEL_SVS 128
#define RPMH_REGULATOR_LEVEL_SVS_L0 144
#define RPMH_REGULATOR_LEVEL_SVS_L1 192
@@ -307,16 +327,6 @@
#define SDM660_SSCMX 8
#define SDM660_SSCMX_VFL 9
-/* SM4250 Power Domains */
-#define SM4250_VDDCX 0
-#define SM4250_VDDCX_AO 1
-#define SM4250_VDDCX_VFL 2
-#define SM4250_VDDMX 3
-#define SM4250_VDDMX_AO 4
-#define SM4250_VDDMX_VFL 5
-#define SM4250_VDD_LPI_CX 6
-#define SM4250_VDD_LPI_MX 7
-
/* SM6115 Power Domains */
#define SM6115_VDDCX 0
#define SM6115_VDDCX_AO 1
diff --git a/include/dt-bindings/power/r8a779g0-sysc.h b/include/dt-bindings/power/r8a779g0-sysc.h
index 7daa70f1814e..c7b139fb075f 100644
--- a/include/dt-bindings/power/r8a779g0-sysc.h
+++ b/include/dt-bindings/power/r8a779g0-sysc.h
@@ -38,6 +38,7 @@
#define R8A779G0_PD_A3VIP2 58
#define R8A779G0_PD_A3ISP0 60
#define R8A779G0_PD_A3ISP1 61
+#define R8A779G0_PD_A3DUL 62
/* Always-on power area */
#define R8A779G0_PD_ALWAYS_ON 64
diff --git a/include/dt-bindings/power/starfive,jh7110-pmu.h b/include/dt-bindings/power/starfive,jh7110-pmu.h
new file mode 100644
index 000000000000..132bfe401fc8
--- /dev/null
+++ b/include/dt-bindings/power/starfive,jh7110-pmu.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Author: Walker Chen <walker.chen@starfivetech.com>
+ */
+#ifndef __DT_BINDINGS_POWER_JH7110_POWER_H__
+#define __DT_BINDINGS_POWER_JH7110_POWER_H__
+
+#define JH7110_PD_SYSTOP 0
+#define JH7110_PD_CPU 1
+#define JH7110_PD_GPUA 2
+#define JH7110_PD_VDEC 3
+#define JH7110_PD_VOUT 4
+#define JH7110_PD_ISP 5
+#define JH7110_PD_VENC 6
+
+#endif
diff --git a/include/dt-bindings/reset/mt8195-resets.h b/include/dt-bindings/reset/mt8195-resets.h
index 24ab3631dcea..e61660438d61 100644
--- a/include/dt-bindings/reset/mt8195-resets.h
+++ b/include/dt-bindings/reset/mt8195-resets.h
@@ -35,4 +35,49 @@
#define MT8195_INFRA_RST2_PCIE_P1_SWRST 4
#define MT8195_INFRA_RST2_USBSIF_P1_SWRST 5
+/* VDOSYS1 */
+#define MT8195_VDOSYS1_SW0_RST_B_SMI_LARB2 0
+#define MT8195_VDOSYS1_SW0_RST_B_SMI_LARB3 1
+#define MT8195_VDOSYS1_SW0_RST_B_GALS 2
+#define MT8195_VDOSYS1_SW0_RST_B_FAKE_ENG0 3
+#define MT8195_VDOSYS1_SW0_RST_B_FAKE_ENG1 4
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA0 5
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA1 6
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA2 7
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA3 8
+#define MT8195_VDOSYS1_SW0_RST_B_VPP_MERGE0 9
+#define MT8195_VDOSYS1_SW0_RST_B_VPP_MERGE1 10
+#define MT8195_VDOSYS1_SW0_RST_B_VPP_MERGE2 11
+#define MT8195_VDOSYS1_SW0_RST_B_VPP_MERGE3 12
+#define MT8195_VDOSYS1_SW0_RST_B_VPP_MERGE4 13
+#define MT8195_VDOSYS1_SW0_RST_B_VPP2_TO_VDO1_DL_ASYNC 14
+#define MT8195_VDOSYS1_SW0_RST_B_VPP3_TO_VDO1_DL_ASYNC 15
+#define MT8195_VDOSYS1_SW0_RST_B_DISP_MUTEX 16
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA4 17
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA5 18
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA6 19
+#define MT8195_VDOSYS1_SW0_RST_B_MDP_RDMA7 20
+#define MT8195_VDOSYS1_SW0_RST_B_DP_INTF0 21
+#define MT8195_VDOSYS1_SW0_RST_B_DPI0 22
+#define MT8195_VDOSYS1_SW0_RST_B_DPI1 23
+#define MT8195_VDOSYS1_SW0_RST_B_DISP_MONITOR 24
+#define MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC 25
+#define MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC 26
+#define MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC 27
+#define MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC 28
+#define MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC 29
+#define MT8195_VDOSYS1_SW0_RST_B_VDO0_DSC_TO_VDO1_DL_ASYNC 30
+#define MT8195_VDOSYS1_SW0_RST_B_VDO0_MERGE_TO_VDO1_DL_ASYNC 31
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0 32
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0 33
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE 34
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1 48
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1 49
+#define MT8195_VDOSYS1_SW1_RST_B_DISP_MIXER 50
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC 51
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC 52
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC 53
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC 54
+#define MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC 55
+
#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8195 */
diff --git a/include/linux/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index f8335644a01a..1e449a5d7f5c 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -9,6 +9,8 @@
#include <linux/types.h>
#include <linux/cpumask.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+
#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1
@@ -51,10 +53,6 @@ enum qcom_scm_ice_cipher {
QCOM_SCM_ICE_CIPHER_AES_256_CBC = 4,
};
-#define QCOM_SCM_VMID_HLOS 0x3
-#define QCOM_SCM_VMID_MSS_MSA 0xF
-#define QCOM_SCM_VMID_WLAN 0x18
-#define QCOM_SCM_VMID_WLAN_CE 0x19
#define QCOM_SCM_PERM_READ 0x4
#define QCOM_SCM_PERM_WRITE 0x2
#define QCOM_SCM_PERM_EXEC 0x1
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index b09f443d3ab9..0e4c70987e6a 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -79,6 +79,10 @@
#define EVENT_ERROR_PSM_ERR1 (0x28108000U)
#define EVENT_ERROR_PSM_ERR2 (0x2810C000U)
+/* ZynqMP SD tap delay tuning */
+#define SD_ITAPDLY 0xFF180314
+#define SD_OTAPDLYSEL 0xFF180318
+
enum pm_api_cb_id {
PM_INIT_SUSPEND_CB = 30,
PM_ACKNOWLEDGE_CB = 31,
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 4f765bc788ff..0ce5746a4470 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -804,11 +804,6 @@ struct scmi_device {
#define to_scmi_dev(d) container_of(d, struct scmi_device, dev)
-struct scmi_device *
-scmi_device_create(struct device_node *np, struct device *parent, int protocol,
- const char *name);
-void scmi_device_destroy(struct scmi_device *scmi_dev);
-
struct scmi_device_id {
u8 protocol_id;
const char *name;
diff --git a/include/linux/soc/apple/rtkit.h b/include/linux/soc/apple/rtkit.h
index c9cabb679cd1..fc456f75c131 100644
--- a/include/linux/soc/apple/rtkit.h
+++ b/include/linux/soc/apple/rtkit.h
@@ -22,6 +22,7 @@
* @size: Size of the shared memory buffer.
* @iova: Device VA of shared memory buffer.
* @is_mapped: Shared memory buffer is managed by the co-processor.
+ * @private: Private data pointer for the parent driver.
*/
struct apple_rtkit_shmem {
@@ -30,6 +31,7 @@ struct apple_rtkit_shmem {
size_t size;
dma_addr_t iova;
bool is_mapped;
+ void *private;
};
/*
@@ -78,6 +80,25 @@ struct apple_rtkit *devm_apple_rtkit_init(struct device *dev, void *cookie,
const struct apple_rtkit_ops *ops);
/*
+ * Non-devm version of devm_apple_rtkit_init. Must be freed with
+ * apple_rtkit_free.
+ *
+ * @dev: Pointer to the device node this coprocessor is assocated with
+ * @cookie: opaque cookie passed to all functions defined in rtkit_ops
+ * @mbox_name: mailbox name used to communicate with the co-processor
+ * @mbox_idx: mailbox index to be used if mbox_name is NULL
+ * @ops: pointer to rtkit_ops to be used for this co-processor
+ */
+struct apple_rtkit *apple_rtkit_init(struct device *dev, void *cookie,
+ const char *mbox_name, int mbox_idx,
+ const struct apple_rtkit_ops *ops);
+
+/*
+ * Free an instance of apple_rtkit.
+ */
+void apple_rtkit_free(struct apple_rtkit *rtk);
+
+/*
* Reinitialize internal structures. Must only be called with the co-processor
* is held in reset.
*/
@@ -105,6 +126,11 @@ int apple_rtkit_wake(struct apple_rtkit *rtk);
int apple_rtkit_shutdown(struct apple_rtkit *rtk);
/*
+ * Put the co-processor into idle mode
+ */
+int apple_rtkit_idle(struct apple_rtkit *rtk);
+
+/*
* Checks if RTKit is running and ready to handle messages.
*/
bool apple_rtkit_is_running(struct apple_rtkit *rtk);
diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h
index 50804ac748bd..07f67b3d8e97 100644
--- a/include/linux/soc/mediatek/infracfg.h
+++ b/include/linux/soc/mediatek/infracfg.h
@@ -140,6 +140,127 @@
#define MT8192_TOP_AXI_PROT_EN_MM_2_MDP_2ND BIT(13)
#define MT8192_TOP_AXI_PROT_EN_VDNR_CAM BIT(21)
+#define MT8188_TOP_AXI_PROT_EN_SET 0x2A0
+#define MT8188_TOP_AXI_PROT_EN_CLR 0x2A4
+#define MT8188_TOP_AXI_PROT_EN_STA 0x228
+#define MT8188_TOP_AXI_PROT_EN_1_SET 0x2A8
+#define MT8188_TOP_AXI_PROT_EN_1_CLR 0x2AC
+#define MT8188_TOP_AXI_PROT_EN_1_STA 0x258
+#define MT8188_TOP_AXI_PROT_EN_2_SET 0x714
+#define MT8188_TOP_AXI_PROT_EN_2_CLR 0x718
+#define MT8188_TOP_AXI_PROT_EN_2_STA 0x724
+
+#define MT8188_TOP_AXI_PROT_EN_MM_SET 0x2D4
+#define MT8188_TOP_AXI_PROT_EN_MM_CLR 0x2D8
+#define MT8188_TOP_AXI_PROT_EN_MM_STA 0x2EC
+#define MT8188_TOP_AXI_PROT_EN_MM_2_SET 0xDCC
+#define MT8188_TOP_AXI_PROT_EN_MM_2_CLR 0xDD0
+#define MT8188_TOP_AXI_PROT_EN_MM_2_STA 0xDD8
+
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_SET 0xB84
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_CLR 0xB88
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_STA 0xB90
+#define MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_SET 0xBCC
+#define MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR 0xBD0
+#define MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA 0xBD8
+
+#define MT8188_TOP_AXI_PROT_EN_MFG1_STEP1 BIT(11)
+#define MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP2 BIT(7)
+#define MT8188_TOP_AXI_PROT_EN_1_MFG1_STEP3 BIT(19)
+#define MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP4 BIT(5)
+#define MT8188_TOP_AXI_PROT_EN_MFG1_STEP5 GENMASK(22, 21)
+#define MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_MFG1_STEP6 BIT(17)
+
+#define MT8188_TOP_AXI_PROT_EN_PEXTP_MAC_P0_STEP1 BIT(2)
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_PEXTP_MAC_P0_STEP2 (BIT(8) | BIT(18) | BIT(30))
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_ETHER_STEP1 BIT(24)
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_HDMI_TX_STEP1 BIT(20)
+#define MT8188_TOP_AXI_PROT_EN_2_ADSP_AO_STEP1 GENMASK(31, 29)
+#define MT8188_TOP_AXI_PROT_EN_2_ADSP_AO_STEP2 (GENMASK(4, 3) | BIT(28))
+#define MT8188_TOP_AXI_PROT_EN_2_ADSP_INFRA_STEP1 (GENMASK(16, 14) | BIT(23) | \
+ BIT(27))
+#define MT8188_TOP_AXI_PROT_EN_2_ADSP_INFRA_STEP2 (GENMASK(19, 17) | GENMASK(26, 25))
+#define MT8188_TOP_AXI_PROT_EN_2_ADSP_STEP1 GENMASK(11, 8)
+#define MT8188_TOP_AXI_PROT_EN_2_ADSP_STEP2 GENMASK(22, 21)
+#define MT8188_TOP_AXI_PROT_EN_2_AUDIO_STEP1 BIT(20)
+#define MT8188_TOP_AXI_PROT_EN_2_AUDIO_STEP2 BIT(12)
+#define MT8188_TOP_AXI_PROT_EN_2_AUDIO_ASRC_STEP1 BIT(24)
+#define MT8188_TOP_AXI_PROT_EN_2_AUDIO_ASRC_STEP2 BIT(13)
+
+#define MT8188_TOP_AXI_PROT_EN_VPPSYS0_STEP1 BIT(10)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_VPPSYS0_STEP2 GENMASK(9, 8)
+#define MT8188_TOP_AXI_PROT_EN_VPPSYS0_STEP3 BIT(23)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_VPPSYS0_STEP4 (BIT(1) | BIT(4) | BIT(11))
+#define MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VPPSYS0_STEP5 (BIT(20))
+#define MT8188_TOP_AXI_PROT_EN_MM_VDOSYS0_STEP1 (GENMASK(18, 17) | GENMASK(21, 20))
+#define MT8188_TOP_AXI_PROT_EN_VDOSYS0_STEP2 BIT(6)
+#define MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VDOSYS0_STEP3 BIT(21)
+#define MT8188_TOP_AXI_PROT_EN_MM_VDOSYS1_STEP1 GENMASK(31, 30)
+#define MT8188_TOP_AXI_PROT_EN_MM_VDOSYS1_STEP2 BIT(22)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_VDOSYS1_STEP3 BIT(10)
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_DP_TX_STEP1 BIT(23)
+#define MT8188_TOP_AXI_PROT_EN_INFRA_VDNR_EDP_TX_STEP1 BIT(22)
+
+#define MT8188_TOP_AXI_PROT_EN_MM_VPPSYS1_STEP1 GENMASK(6, 5)
+#define MT8188_TOP_AXI_PROT_EN_MM_VPPSYS1_STEP2 BIT(23)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_VPPSYS1_STEP3 BIT(18)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_WPE_STEP1 BIT(23)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_WPE_STEP2 BIT(21)
+#define MT8188_TOP_AXI_PROT_EN_MM_VDEC0_STEP1 BIT(13)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_VDEC0_STEP2 BIT(13)
+#define MT8188_TOP_AXI_PROT_EN_MM_VDEC1_STEP1 BIT(14)
+#define MT8188_TOP_AXI_PROT_EN_MM_VDEC1_STEP2 BIT(29)
+#define MT8188_TOP_AXI_PROT_EN_MM_VENC_STEP1 (BIT(9) | BIT(11))
+#define MT8188_TOP_AXI_PROT_EN_MM_VENC_STEP2 BIT(26)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_VENC_STEP3 BIT(2)
+#define MT8188_TOP_AXI_PROT_EN_MM_IMG_VCORE_STEP1 (BIT(1) | BIT(3))
+#define MT8188_TOP_AXI_PROT_EN_MM_IMG_VCORE_STEP2 BIT(25)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_IMG_VCORE_STEP3 BIT(16)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_IMG_MAIN_STEP1 GENMASK(27, 26)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_IMG_MAIN_STEP2 GENMASK(25, 24)
+#define MT8188_TOP_AXI_PROT_EN_MM_CAM_VCORE_STEP1 (BIT(2) | BIT(4))
+#define MT8188_TOP_AXI_PROT_EN_2_CAM_VCORE_STEP2 BIT(0)
+#define MT8188_TOP_AXI_PROT_EN_1_CAM_VCORE_STEP3 BIT(22)
+#define MT8188_TOP_AXI_PROT_EN_MM_CAM_VCORE_STEP4 BIT(24)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_CAM_VCORE_STEP5 BIT(17)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_CAM_MAIN_STEP1 GENMASK(31, 30)
+#define MT8188_TOP_AXI_PROT_EN_2_CAM_MAIN_STEP2 BIT(2)
+#define MT8188_TOP_AXI_PROT_EN_MM_2_CAM_MAIN_STEP3 GENMASK(29, 28)
+#define MT8188_TOP_AXI_PROT_EN_2_CAM_MAIN_STEP4 BIT(1)
+
+#define MT8188_SMI_COMMON_CLAMP_EN_STA 0x3C0
+#define MT8188_SMI_COMMON_CLAMP_EN_SET 0x3C4
+#define MT8188_SMI_COMMON_CLAMP_EN_CLR 0x3C8
+
+#define MT8188_SMI_COMMON_SMI_CLAMP_DIP_TO_VDO0 GENMASK(3, 1)
+#define MT8188_SMI_COMMON_SMI_CLAMP_DIP_TO_VPP1 GENMASK(2, 1)
+#define MT8188_SMI_COMMON_SMI_CLAMP_IPE_TO_VPP1 BIT(0)
+
+#define MT8188_SMI_COMMON_SMI_CLAMP_CAM_SUBA_TO_VPP0 GENMASK(3, 2)
+#define MT8188_SMI_COMMON_SMI_CLAMP_CAM_SUBB_TO_VDO0 GENMASK(3, 2)
+
+#define MT8188_SMI_LARB10_RESET_ADDR 0xC
+#define MT8188_SMI_LARB11A_RESET_ADDR 0xC
+#define MT8188_SMI_LARB11C_RESET_ADDR 0xC
+#define MT8188_SMI_LARB12_RESET_ADDR 0xC
+#define MT8188_SMI_LARB11B_RESET_ADDR 0xC
+#define MT8188_SMI_LARB15_RESET_ADDR 0xC
+#define MT8188_SMI_LARB16B_RESET_ADDR 0xA0
+#define MT8188_SMI_LARB17B_RESET_ADDR 0xA0
+#define MT8188_SMI_LARB16A_RESET_ADDR 0xA0
+#define MT8188_SMI_LARB17A_RESET_ADDR 0xA0
+
+#define MT8188_SMI_LARB10_RESET BIT(0)
+#define MT8188_SMI_LARB11A_RESET BIT(0)
+#define MT8188_SMI_LARB11C_RESET BIT(0)
+#define MT8188_SMI_LARB12_RESET BIT(8)
+#define MT8188_SMI_LARB11B_RESET BIT(0)
+#define MT8188_SMI_LARB15_RESET BIT(0)
+#define MT8188_SMI_LARB16B_RESET BIT(4)
+#define MT8188_SMI_LARB17B_RESET BIT(4)
+#define MT8188_SMI_LARB16A_RESET BIT(4)
+#define MT8188_SMI_LARB17A_RESET BIT(4)
+
#define MT8186_TOP_AXI_PROT_EN_SET (0x2A0)
#define MT8186_TOP_AXI_PROT_EN_CLR (0x2A4)
#define MT8186_TOP_AXI_PROT_EN_STA (0x228)
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index b85f66db33e1..dc2963a0a0f7 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -6,6 +6,10 @@
#ifndef __MTK_MMSYS_H
#define __MTK_MMSYS_H
+#include <linux/mailbox_controller.h>
+#include <linux/mailbox/mtk-cmdq-mailbox.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
enum mtk_ddp_comp_id;
struct device;
@@ -36,7 +40,16 @@ enum mtk_ddp_comp_id {
DDP_COMPONENT_DSI1,
DDP_COMPONENT_DSI2,
DDP_COMPONENT_DSI3,
+ DDP_COMPONENT_ETHDR_MIXER,
DDP_COMPONENT_GAMMA,
+ DDP_COMPONENT_MDP_RDMA0,
+ DDP_COMPONENT_MDP_RDMA1,
+ DDP_COMPONENT_MDP_RDMA2,
+ DDP_COMPONENT_MDP_RDMA3,
+ DDP_COMPONENT_MDP_RDMA4,
+ DDP_COMPONENT_MDP_RDMA5,
+ DDP_COMPONENT_MDP_RDMA6,
+ DDP_COMPONENT_MDP_RDMA7,
DDP_COMPONENT_MERGE0,
DDP_COMPONENT_MERGE1,
DDP_COMPONENT_MERGE2,
@@ -74,4 +87,16 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val);
+void mtk_mmsys_merge_async_config(struct device *dev, int idx, int width,
+ int height, struct cmdq_pkt *cmdq_pkt);
+
+void mtk_mmsys_hdr_config(struct device *dev, int be_width, int be_height,
+ struct cmdq_pkt *cmdq_pkt);
+
+void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool alpha_sel, u16 alpha,
+ u8 mode, u32 biwidth, struct cmdq_pkt *cmdq_pkt);
+
+void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx, bool channel_swap,
+ struct cmdq_pkt *cmdq_pkt);
+
#endif /* __MTK_MMSYS_H */
diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h
index 23c5b30f3511..be98aebcb3e1 100644
--- a/include/linux/soc/qcom/apr.h
+++ b/include/linux/soc/qcom/apr.h
@@ -153,7 +153,7 @@ typedef struct apr_device gpr_device_t;
struct apr_driver {
int (*probe)(struct apr_device *sl);
- int (*remove)(struct apr_device *sl);
+ void (*remove)(struct apr_device *sl);
int (*callback)(struct apr_device *a,
struct apr_resp_pkt *d);
int (*gpr_callback)(struct gpr_resp_pkt *d, void *data, int op);
diff --git a/include/linux/soc/qcom/pmic_glink.h b/include/linux/soc/qcom/pmic_glink.h
new file mode 100644
index 000000000000..fd124aa18c81
--- /dev/null
+++ b/include/linux/soc/qcom/pmic_glink.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022, Linaro Ltd
+ */
+#ifndef __SOC_QCOM_PMIC_GLINK_H__
+#define __SOC_QCOM_PMIC_GLINK_H__
+
+struct pmic_glink;
+struct pmic_glink_client;
+
+#define PMIC_GLINK_OWNER_BATTMGR 32778
+#define PMIC_GLINK_OWNER_USBC 32779
+#define PMIC_GLINK_OWNER_USBC_PAN 32780
+
+#define PMIC_GLINK_REQ_RESP 1
+#define PMIC_GLINK_NOTIFY 2
+
+struct pmic_glink_hdr {
+ __le32 owner;
+ __le32 type;
+ __le32 opcode;
+};
+
+int pmic_glink_send(struct pmic_glink_client *client, void *data, size_t len);
+
+struct pmic_glink_client *devm_pmic_glink_register_client(struct device *dev,
+ unsigned int id,
+ void (*cb)(const void *, size_t, void *),
+ void (*pdr)(void *, int),
+ void *priv);
+
+#endif
diff --git a/include/memory/renesas-rpc-if.h b/include/memory/renesas-rpc-if.h
index 862eff613dc7..b8fa30fd6b50 100644
--- a/include/memory/renesas-rpc-if.h
+++ b/include/memory/renesas-rpc-if.h
@@ -65,41 +65,15 @@ enum rpcif_type {
struct rpcif {
struct device *dev;
- void __iomem *base;
void __iomem *dirmap;
- struct regmap *regmap;
- struct reset_control *rstc;
size_t size;
- enum rpcif_type type;
- enum rpcif_data_dir dir;
- u8 bus_size;
- u8 xfer_size;
- void *buffer;
- u32 xferlen;
- u32 smcr;
- u32 smadr;
- u32 command; /* DRCMR or SMCMR */
- u32 option; /* DROPR or SMOPR */
- u32 enable; /* DRENR or SMENR */
- u32 dummy; /* DRDMCR or SMDMCR */
- u32 ddr; /* DRDRENR or SMDRENR */
};
int rpcif_sw_init(struct rpcif *rpc, struct device *dev);
-int rpcif_hw_init(struct rpcif *rpc, bool hyperflash);
-void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
+int rpcif_hw_init(struct device *dev, bool hyperflash);
+void rpcif_prepare(struct device *dev, const struct rpcif_op *op, u64 *offs,
size_t *len);
-int rpcif_manual_xfer(struct rpcif *rpc);
-ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf);
-
-static inline void rpcif_enable_rpm(struct rpcif *rpc)
-{
- pm_runtime_enable(rpc->dev);
-}
-
-static inline void rpcif_disable_rpm(struct rpcif *rpc)
-{
- pm_runtime_disable(rpc->dev);
-}
+int rpcif_manual_xfer(struct device *dev);
+ssize_t rpcif_dirmap_read(struct device *dev, u64 offs, size_t len, void *buf);
#endif // __RENESAS_RPC_IF_H
diff --git a/include/trace/events/scmi.h b/include/trace/events/scmi.h
index f160d68f961d..422c1ad9484d 100644
--- a/include/trace/events/scmi.h
+++ b/include/trace/events/scmi.h
@@ -139,11 +139,15 @@ TRACE_EVENT(scmi_rx_done,
);
TRACE_EVENT(scmi_msg_dump,
- TP_PROTO(u8 protocol_id, u8 msg_id, unsigned char *tag, u16 seq,
- int status, void *buf, size_t len),
- TP_ARGS(protocol_id, msg_id, tag, seq, status, buf, len),
+ TP_PROTO(int id, u8 channel_id, u8 protocol_id, u8 msg_id,
+ unsigned char *tag, u16 seq, int status,
+ void *buf, size_t len),
+ TP_ARGS(id, channel_id, protocol_id, msg_id, tag, seq, status,
+ buf, len),
TP_STRUCT__entry(
+ __field(int, id)
+ __field(u8, channel_id)
__field(u8, protocol_id)
__field(u8, msg_id)
__array(char, tag, 5)
@@ -154,6 +158,8 @@ TRACE_EVENT(scmi_msg_dump,
),
TP_fast_assign(
+ __entry->id = id;
+ __entry->channel_id = channel_id;
__entry->protocol_id = protocol_id;
__entry->msg_id = msg_id;
strscpy(__entry->tag, tag, 5);
@@ -163,9 +169,9 @@ TRACE_EVENT(scmi_msg_dump,
memcpy(__get_dynamic_array(cmd), buf, __entry->len);
),
- TP_printk("pt=%02X t=%s msg_id=%02X seq=%04X s=%d pyld=%s",
- __entry->protocol_id, __entry->tag, __entry->msg_id,
- __entry->seq, __entry->status,
+ TP_printk("id=%d ch=%02X pt=%02X t=%s msg_id=%02X seq=%04X s=%d pyld=%s",
+ __entry->id, __entry->channel_id, __entry->protocol_id,
+ __entry->tag, __entry->msg_id, __entry->seq, __entry->status,
__print_hex_str(__get_dynamic_array(cmd), __entry->len))
);
#endif /* _TRACE_SCMI_H */
diff --git a/sound/soc/qcom/qdsp6/q6core.c b/sound/soc/qcom/qdsp6/q6core.c
index 5358fefd4210..49cfb32cd209 100644
--- a/sound/soc/qcom/qdsp6/q6core.c
+++ b/sound/soc/qcom/qdsp6/q6core.c
@@ -339,7 +339,7 @@ static int q6core_probe(struct apr_device *adev)
return 0;
}
-static int q6core_exit(struct apr_device *adev)
+static void q6core_exit(struct apr_device *adev)
{
struct q6core *core = dev_get_drvdata(&adev->dev);
@@ -350,8 +350,6 @@ static int q6core_exit(struct apr_device *adev)
g_core = NULL;
kfree(core);
-
- return 0;
}
#ifdef CONFIG_OF