diff options
| -rw-r--r-- | drivers/net/can/flexcan.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index df4bfb83024c..e163c55e737b 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -193,7 +193,7 @@ * * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected. */ -#define FLEXCAN_QUIRK_BROKEN_ERR_STATE BIT(1) /* [TR]WRN_INT not connected */ +#define FLEXCAN_QUIRK_BROKEN_WERR_STATE BIT(1) /* [TR]WRN_INT not connected */ #define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2) /* Disable RX FIFO Global mask */ #define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3) /* Enable EACEN and RRS bit in ctrl2 */ #define FLEXCAN_QUIRK_DISABLE_MECR BIT(4) /* Disable Memory error detection */ @@ -281,7 +281,7 @@ struct flexcan_priv { }; static const struct flexcan_devtype_data fsl_p1010_devtype_data = { - .quirks = FLEXCAN_QUIRK_BROKEN_ERR_STATE, + .quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE, }; static const struct flexcan_devtype_data fsl_imx28_devtype_data; @@ -767,7 +767,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) /* state change interrupt or broken error state quirk fix is enabled */ if ((reg_esr & FLEXCAN_ESR_ERR_STATE) || - (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_ERR_STATE)) + (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_WERR_STATE)) flexcan_irq_state(dev, reg_esr); /* bus error IRQ - handle if bus error reporting is activated */ @@ -888,7 +888,7 @@ static int flexcan_chip_start(struct net_device *dev) * on most Flexcan cores, too. Otherwise we don't get * any error warning or passive interrupts. */ - if (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_ERR_STATE || + if (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_WERR_STATE || priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) reg_ctrl |= FLEXCAN_CTRL_ERR_MSK; else |