diff options
| -rw-r--r-- | Documentation/devicetree/bindings/arm/l2cc.txt | 42 | ||||
| -rw-r--r-- | arch/arm/include/asm/hardware/cache-l2x0.h | 17 | ||||
| -rw-r--r-- | arch/arm/mm/cache-l2x0.c | 103 |
3 files changed, 162 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt new file mode 100644 index 000000000000..f50e021a0998 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -0,0 +1,42 @@ +* ARM L2 Cache Controller + +ARM cores often have a separate level 2 cache controller. There are various +implementations of the L2 cache controller with compatible programming models. +The ARM L2 cache representation in the device tree should be done as follows: + +Required properties: + +- compatible : should be one of: + "arm,pl310-cache" + "arm,l220-cache" + "arm,l210-cache" +- cache-unified : Specifies the cache is a unified cache. +- cache-level : Should be set to 2 for a level 2 cache. +- reg : Physical base address and size of cache controller's memory mapped + registers. + +Optional properties: + +- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. +- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. +- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. +- arm,filter-ranges : <start length> Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. + +Example: + +L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-latency = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; +}; diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 99a6ed7e1bfd..c48cb1e1c46c 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -52,6 +52,8 @@ #define L2X0_LOCKDOWN_WAY_D_BASE 0x900 #define L2X0_LOCKDOWN_WAY_I_BASE 0x904 #define L2X0_LOCKDOWN_STRIDE 0x08 +#define L2X0_ADDR_FILTER_START 0xC00 +#define L2X0_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -67,6 +69,14 @@ #define L2X0_CACHE_ID_PART_L310 (3 << 6) #define L2X0_AUX_CTRL_MASK 0xc0000fff +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 #define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) @@ -77,8 +87,15 @@ #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 +#define L2X0_LATENCY_CTRL_RD_SHIFT 4 +#define L2X0_LATENCY_CTRL_WR_SHIFT 8 + +#define L2X0_ADDR_FILTER_EN 1 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); #endif #endif diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 9ecfdb511951..db4484f5bf98 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,9 +16,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/err.h> #include <linux/init.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -372,3 +375,103 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", ways, cache_id, aux, l2x0_size); } + +#ifdef CONFIG_OF +static void __init l2x0_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static void __init pl310_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[0] && filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, + l2x0_base + L2X0_ADDR_FILTER_START); + } +} + +static const struct of_device_id l2x0_ids[] __initconst = { + { .compatible = "arm,pl310-cache", .data = pl310_of_setup }, + { .compatible = "arm,l220-cache", .data = l2x0_of_setup }, + { .compatible = "arm,l210-cache", .data = l2x0_of_setup }, + {} +}; + +int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask) +{ + struct device_node *np; + void (*l2_setup)(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask); + + np = of_find_matching_node(NULL, l2x0_ids); + if (!np) + return -ENODEV; + l2x0_base = of_iomap(np, 0); + if (!l2x0_base) + return -ENOMEM; + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + l2_setup = of_match_node(l2x0_ids, np)->data; + if (l2_setup) + l2_setup(np, &aux_val, &aux_mask); + } + l2x0_init(l2x0_base, aux_val, aux_mask); + return 0; +} +#endif |