diff options
26 files changed, 778 insertions, 358 deletions
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index dad6358074ac..e91485d11241 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -2,13 +2,35 @@ ACT88xx regulators ------------------- Required properties: -- compatible: "active-semi,act8846" or "active-semi,act8865" +- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600" - reg: I2C slave address Optional properties: - system-power-controller: Telling whether or not this pmic is controlling the system power. See Documentation/devicetree/bindings/power/power-controller.txt . +Optional input supply properties: +- for act8600: + - vp1-supply: The input supply for DCDC_REG1 + - vp2-supply: The input supply for DCDC_REG2 + - vp3-supply: The input supply for DCDC_REG3 + - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8 + SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies. +- for act8846: + - vp1-supply: The input supply for REG1 + - vp2-supply: The input supply for REG2 + - vp3-supply: The input supply for REG3 + - vp4-supply: The input supply for REG4 + - inl1-supply: The input supply for REG5, REG6 and REG7 + - inl2-supply: The input supply for REG8 and LDO_REG9 + - inl3-supply: The input supply for REG10, REG11 and REG12 +- for act8865: + - vp1-supply: The input supply for DCDC_REG1 + - vp2-supply: The input supply for DCDC_REG2 + - vp3-supply: The input supply for DCDC_REG3 + - inl45-supply: The input supply for LDO_REG1 and LDO_REG2 + - inl67-supply: The input supply for LDO_REG3 and LDO_REG4 + Any standard regulator properties can be used to configure the single regulator. The valid names for regulators are: @@ -16,6 +38,9 @@ The valid names for regulators are: REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 - for act8865: DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. + - for act8600: + DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7, + LDO_REG8, LDO_REG9, LDO_REG10, Example: -------- diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt index 8afb236ca765..e51564c1a140 100644 --- a/Documentation/power/regulator/consumer.txt +++ b/Documentation/power/regulator/consumer.txt @@ -137,7 +137,7 @@ Indirect operating mode control. Consumer drivers can request a change in their supply regulator operating mode by calling :- -int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); +int regulator_set_load(struct regulator *regulator, int load_uA); This will cause the core to recalculate the total load on the regulator (based on all its consumers) and change operating mode (if necessary and permitted) diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c index 3e246210c46f..0ec5abdba5c4 100644 --- a/drivers/gpu/drm/msm/edp/edp_ctrl.c +++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c @@ -332,7 +332,7 @@ static int edp_regulator_enable(struct edp_ctrl *ctrl) goto vdda_set_fail; } - ret = regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_ON_LOAD); + ret = regulator_set_load(ctrl->vdda_vreg, VDDA_UA_ON_LOAD); if (ret < 0) { pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__); goto vdda_set_fail; @@ -356,7 +356,7 @@ static int edp_regulator_enable(struct edp_ctrl *ctrl) lvl_enable_fail: regulator_disable(ctrl->vdda_vreg); vdda_enable_fail: - regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD); + regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD); vdda_set_fail: return ret; } @@ -365,7 +365,7 @@ static void edp_regulator_disable(struct edp_ctrl *ctrl) { regulator_disable(ctrl->lvl_vreg); regulator_disable(ctrl->vdda_vreg); - regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD); + regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD); } static int edp_gpio_config(struct edp_ctrl *ctrl) diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c index 44ee983d57fe..86665e9dc399 100644 --- a/drivers/phy/phy-qcom-ufs.c +++ b/drivers/phy/phy-qcom-ufs.c @@ -346,10 +346,10 @@ int ufs_qcom_phy_cfg_vreg(struct phy *phy, goto out; } uA_load = on ? vreg->max_uA : 0; - ret = regulator_set_optimum_mode(reg, uA_load); + ret = regulator_set_load(reg, uA_load); if (ret >= 0) { /* - * regulator_set_optimum_mode() returns new regulator + * regulator_set_load() returns new regulator * mode upon success. */ ret = 0; diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 9eec453b745d..2ff73d72ca34 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -29,6 +29,35 @@ #include <linux/regmap.h> /* + * ACT8600 Global Register Map. + */ +#define ACT8600_SYS_MODE 0x00 +#define ACT8600_SYS_CTRL 0x01 +#define ACT8600_DCDC1_VSET 0x10 +#define ACT8600_DCDC1_CTRL 0x12 +#define ACT8600_DCDC2_VSET 0x20 +#define ACT8600_DCDC2_CTRL 0x22 +#define ACT8600_DCDC3_VSET 0x30 +#define ACT8600_DCDC3_CTRL 0x32 +#define ACT8600_SUDCDC4_VSET 0x40 +#define ACT8600_SUDCDC4_CTRL 0x41 +#define ACT8600_LDO5_VSET 0x50 +#define ACT8600_LDO5_CTRL 0x51 +#define ACT8600_LDO6_VSET 0x60 +#define ACT8600_LDO6_CTRL 0x61 +#define ACT8600_LDO7_VSET 0x70 +#define ACT8600_LDO7_CTRL 0x71 +#define ACT8600_LDO8_VSET 0x80 +#define ACT8600_LDO8_CTRL 0x81 +#define ACT8600_LDO910_CTRL 0x91 +#define ACT8600_APCH0 0xA1 +#define ACT8600_APCH1 0xA8 +#define ACT8600_APCH2 0xA9 +#define ACT8600_APCH_STAT 0xAA +#define ACT8600_OTG0 0xB0 +#define ACT8600_OTG1 0xB2 + +/* * ACT8846 Global Register Map. */ #define ACT8846_SYS0 0x00 @@ -94,10 +123,15 @@ #define ACT8865_ENA 0x80 /* ON - [7] */ #define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */ + +#define ACT8600_LDO10_ENA 0x40 /* ON - [6] */ +#define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */ + /* * ACT8865 voltage number */ #define ACT8865_VOLTAGE_NUM 64 +#define ACT8600_SUDCDC_VOLTAGE_NUM 255 struct act8865 { struct regmap *regmap; @@ -116,6 +150,13 @@ static const struct regulator_linear_range act8865_voltage_ranges[] = { REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), }; +static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0), + REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000), + REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000), + REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), +}; + static struct regulator_ops act8865_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, @@ -126,9 +167,16 @@ static struct regulator_ops act8865_ops = { .is_enabled = regulator_is_enabled_regmap, }; -#define ACT88xx_REG(_name, _family, _id, _vsel_reg) \ +static struct regulator_ops act8865_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \ [_family##_ID_##_id] = { \ .name = _name, \ + .supply_name = _supply, \ .id = _family##_ID_##_id, \ .type = REGULATOR_VOLTAGE, \ .ops = &act8865_ops, \ @@ -142,33 +190,80 @@ static struct regulator_ops act8865_ops = { .owner = THIS_MODULE, \ } +static const struct regulator_desc act8600_regulators[] = { + ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"), + ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"), + ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET, "vp3"), + { + .name = "SUDCDC_REG4", + .id = ACT8600_ID_SUDCDC4, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM, + .linear_ranges = act8600_sudcdc_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges), + .vsel_reg = ACT8600_SUDCDC4_VSET, + .vsel_mask = ACT8600_SUDCDC_VSEL_MASK, + .enable_reg = ACT8600_SUDCDC4_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + ACT88xx_REG("LDO5", ACT8600, LDO5, VSET, "inl"), + ACT88xx_REG("LDO6", ACT8600, LDO6, VSET, "inl"), + ACT88xx_REG("LDO7", ACT8600, LDO7, VSET, "inl"), + ACT88xx_REG("LDO8", ACT8600, LDO8, VSET, "inl"), + { + .name = "LDO_REG9", + .id = ACT8600_ID_LDO9, + .ops = &act8865_ldo_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 1, + .fixed_uV = 1800000, + .enable_reg = ACT8600_LDO910_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + { + .name = "LDO_REG10", + .id = ACT8600_ID_LDO10, + .ops = &act8865_ldo_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 1, + .fixed_uV = 1200000, + .enable_reg = ACT8600_LDO910_CTRL, + .enable_mask = ACT8600_LDO10_ENA, + .owner = THIS_MODULE, + }, +}; + static const struct regulator_desc act8846_regulators[] = { - ACT88xx_REG("REG1", ACT8846, REG1, VSET), - ACT88xx_REG("REG2", ACT8846, REG2, VSET0), - ACT88xx_REG("REG3", ACT8846, REG3, VSET0), - ACT88xx_REG("REG4", ACT8846, REG4, VSET0), - ACT88xx_REG("REG5", ACT8846, REG5, VSET), - ACT88xx_REG("REG6", ACT8846, REG6, VSET), - ACT88xx_REG("REG7", ACT8846, REG7, VSET), - ACT88xx_REG("REG8", ACT8846, REG8, VSET), - ACT88xx_REG("REG9", ACT8846, REG9, VSET), - ACT88xx_REG("REG10", ACT8846, REG10, VSET), - ACT88xx_REG("REG11", ACT8846, REG11, VSET), - ACT88xx_REG("REG12", ACT8846, REG12, VSET), + ACT88xx_REG("REG1", ACT8846, REG1, VSET, "vp1"), + ACT88xx_REG("REG2", ACT8846, REG2, VSET0, "vp2"), + ACT88xx_REG("REG3", ACT8846, REG3, VSET0, "vp3"), + ACT88xx_REG("REG4", ACT8846, REG4, VSET0, "vp4"), + ACT88xx_REG("REG5", ACT8846, REG5, VSET, "inl1"), + ACT88xx_REG("REG6", ACT8846, REG6, VSET, "inl1"), + ACT88xx_REG("REG7", ACT8846, REG7, VSET, "inl1"), + ACT88xx_REG("REG8", ACT8846, REG8, VSET, "inl2"), + ACT88xx_REG("REG9", ACT8846, REG9, VSET, "inl2"), + ACT88xx_REG("REG10", ACT8846, REG10, VSET, "inl3"), + ACT88xx_REG("REG11", ACT8846, REG11, VSET, "inl3"), + ACT88xx_REG("REG12", ACT8846, REG12, VSET, "inl3"), }; static const struct regulator_desc act8865_regulators[] = { - ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1), - ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1), - ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1), - ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET), - ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET), - ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET), - ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET), + ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"), + ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"), + ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"), + ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"), + ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"), + ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"), + ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), }; #ifdef CONFIG_OF static const struct of_device_id act8865_dt_ids[] = { + { .compatible = "active-semi,act8600", .data = (void *)ACT8600 }, { .compatible = "active-semi,act8846", .data = (void *)ACT8846 }, { .compatible = "active-semi,act8865", .data = (void *)ACT8865 }, { } @@ -200,6 +295,19 @@ static struct of_regulator_match act8865_matches[] = { [ACT8865_ID_LDO4] = { .name = "LDO_REG4"}, }; +static struct of_regulator_match act8600_matches[] = { + [ACT8600_ID_DCDC1] = { .name = "DCDC_REG1"}, + [ACT8600_ID_DCDC2] = { .name = "DCDC_REG2"}, + [ACT8600_ID_DCDC3] = { .name = "DCDC_REG3"}, + [ACT8600_ID_SUDCDC4] = { .name = "SUDCDC_REG4"}, + [ACT8600_ID_LDO5] = { .name = "LDO_REG5"}, + [ACT8600_ID_LDO6] = { .name = "LDO_REG6"}, + [ACT8600_ID_LDO7] = { .name = "LDO_REG7"}, + [ACT8600_ID_LDO8] = { .name = "LDO_REG8"}, + [ACT8600_ID_LDO9] = { .name = "LDO_REG9"}, + [ACT8600_ID_LDO10] = { .name = "LDO_REG10"}, +}; + static int act8865_pdata_from_dt(struct device *dev, struct device_node **of_node, struct act8865_platform_data *pdata, @@ -217,6 +325,10 @@ static int act8865_pdata_from_dt(struct device *dev, } switch (type) { + case ACT8600: + matches = act8600_matches; + num_matches = ARRAY_SIZE(act8600_matches); + break; case ACT8846: matches = act8846_matches; num_matches = ARRAY_SIZE(act8846_matches); @@ -317,6 +429,12 @@ static int act8865_pmic_probe(struct i2c_client *client, } switch (type) { + case ACT8600: + regulators = act8600_regulators; + num_regulators = ARRAY_SIZE(act8600_regulators); + off_reg = -1; + off_mask = -1; + break; case ACT8846: regulators = act8846_regulators; num_regulators = ARRAY_SIZE(act8846_regulators); @@ -366,7 +484,7 @@ static int act8865_pmic_probe(struct i2c_client *client, } if (of_device_is_system_power_controller(dev->of_node)) { - if (!pm_power_off) { + if (!pm_power_off && (off_reg > 0)) { act8865_i2c_client = client; act8865->off_reg = off_reg; act8865->off_mask = off_mask; @@ -402,6 +520,7 @@ static int act8865_pmic_probe(struct i2c_client *client, } static const struct i2c_device_id act8865_ids[] = { + { .name = "act8600", .driver_data = ACT8600 }, { .name = "act8846", .driver_data = ACT8846 }, { .name = "act8865", .driver_data = ACT8865 }, { }, diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index 8169165904c0..a1d07d347c20 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -282,6 +282,9 @@ static int arizona_ldo1_probe(struct platform_device *pdev) arizona->external_dcvdd = true; ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config); + + of_node_put(config.of_node); + if (IS_ERR(ldo1->regulator)) { ret = PTR_ERR(ldo1->regulator); dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n", @@ -289,8 +292,6 @@ static int arizona_ldo1_probe(struct platform_device *pdev) return ret; } - of_node_put(config.of_node); - platform_set_drvdata(pdev, ldo1); return 0; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 20079006459a..4116e74effa4 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -284,6 +284,9 @@ static int arizona_micsupp_probe(struct platform_device *pdev) micsupp->regulator = devm_regulator_register(&pdev->dev, desc, &config); + + of_node_put(config.of_node); + if (IS_ERR(micsupp->regulator)) { ret = PTR_ERR(micsupp->regulator); dev_err(arizona->dev, "Failed to register mic supply: %d\n", @@ -291,8 +294,6 @@ static int arizona_micsupp_probe(struct platform_device *pdev) return ret; } - of_node_put(config.of_node); - platform_set_drvdata(pdev, micsupp); return 0; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index a4a8a6dc60c4..443eaab933fc 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -648,10 +648,12 @@ static int drms_uA_update(struct regulator_dev *rdev) if (err < 0) return 0; - if (!rdev->desc->ops->get_optimum_mode) + if (!rdev->desc->ops->get_optimum_mode && + !rdev->desc->ops->set_load) return 0; - if (!rdev->desc->ops->set_mode) + if (!rdev->desc->ops->set_mode && + !rdev->desc->ops->set_load) return -EINVAL; /* get output voltage */ @@ -676,22 +678,29 @@ static int drms_uA_update(struct regulator_dev *rdev) list_for_each_entry(sibling, &rdev->consumer_list, list) current_uA += sibling->uA_load; - /* now get the optimum mode for our new total regulator load */ - mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, - output_uV, current_uA); + if (rdev->desc->ops->set_load) { + /* set the optimum mode for our new total regulator load */ + err = rdev->desc->ops->set_load(rdev, current_uA); + if (err < 0) + rdev_err(rdev, "failed to set load %d\n", current_uA); + } else { + /* now get the optimum mode for our new total regulator load */ + mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, + output_uV, current_uA); + + /* check the new mode is allowed */ + err = regulator_mode_constrain(rdev, &mode); + if (err < 0) { + rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", + current_uA, input_uV, output_uV); + return err; + } - /* check the new mode is allowed */ - err = regulator_mode_constrain(rdev, &mode); - if (err < 0) { - rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", - current_uA, input_uV, output_uV); - return err; + err = rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) + rdev_err(rdev, "failed to set optimum mode %x\n", mode); } - err = rdev->desc->ops->set_mode(rdev, mode); - if (err < 0) - rdev_err(rdev, "failed to set optimum mode %x\n", mode); - return err; } @@ -1316,6 +1325,54 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev, return NULL; } +static int regulator_resolve_supply(struct regulator_dev *rdev) +{ + struct regulator_dev *r; + struct device *dev = rdev->dev.parent; + int ret; + + /* No supply to resovle? */ + if (!rdev->supply_name) + return 0; + + /* Supply already resolved? */ + if (rdev->supply) + return 0; + + r = regulator_dev_lookup(dev, rdev->supply_name, &ret); + if (ret == -ENODEV) { + /* + * No supply was specified for this regulator and + * there will never be one. + */ + return 0; + } + + if (!r) { + dev_err(dev, "Failed to resolve %s-supply for %s\n", + rdev->supply_name, rdev->desc->name); + return -EPROBE_DEFER; + } + + /* Recursively resolve the supply of the supply */ + ret = regulator_resolve_supply(r); + if (ret < 0) + return ret; + + ret = set_supply(rdev, r); + if (ret < 0) + return ret; + + /* Cascade always-on state to supply */ + if (_regulator_is_enabled(rdev)) { + ret = regulator_enable(rdev->supply); + if (ret < 0) + return ret; + } + + return 0; +} + /* Internal regulator request function */ static struct regulator *_regulator_get(struct device *dev, const char *id, bool exclusive, bool allow_dummy) @@ -1385,6 +1442,12 @@ found: goto out; } + ret = regulator_resolve_supply(rdev); + if (ret < 0) { + regulator = ERR_PTR(ret); + goto out; + } + if (!try_module_get(rdev->owner)) goto out; @@ -2998,7 +3061,7 @@ unsigned int regulator_get_mode(struct regulator *regulator) EXPORT_SYMBOL_GPL(regulator_get_mode); /** - * regulator_set_optimum_mode - set regulator optimum operating mode + * regulator_set_load - set regulator load * @regulator: regulator source * @uA_load: load current * @@ -3021,9 +3084,9 @@ EXPORT_SYMBOL_GPL(regulator_get_mode); * DRMS will sum the total requested load on the regulator and change * to the most efficient operating mode if platform constraints allow. * - * Returns the new regulator mode or error. + * On error a negative errno is returned. */ -int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) +int regulator_set_load(struct regulator *regulator, int uA_load) { struct regulator_dev *rdev = regulator->rdev; int ret; @@ -3035,7 +3098,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) return ret; } -EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); +EXPORT_SYMBOL_GPL(regulator_set_load); /** * regulator_allow_bypass - allow the regulator to go into bypass mode @@ -3499,7 +3562,18 @@ static struct class regulator_class = { static void rdev_init_debugfs(struct regulator_dev *rdev) { - rdev->debugfs = debugfs_create_dir(rdev_get_name(rdev), debugfs_root); + struct device *parent = rdev->dev.parent; + const char *rname = rdev_get_name(rdev); + char name[NAME_MAX]; + + /* Avoid duplicate debugfs directory names */ + if (parent && rname == rdev->desc->name) { + snprintf(name, sizeof(name), "%s-%s", dev_name(parent), + rname); + rname = name; + } + + rdev->debugfs = debugfs_create_dir(rname, debugfs_root); if (!rdev->debugfs) { rdev_warn(rdev, "Failed to create debugfs directory\n"); return; @@ -3533,7 +3607,6 @@ regulator_register(const struct regulator_desc *regulator_desc, struct regulator_dev *rdev; struct device *dev; int ret, i; - const char *supply = NULL; if (regulator_desc == NULL || cfg == NULL) return ERR_PTR(-EINVAL); @@ -3641,41 +3714,10 @@ regulator_register(const struct regulator_desc *regulator_desc, goto scrub; if (init_data && init_data->supply_regulator) - supply = init_data->supply_regulator; + rdev->supply_name = init_data->supply_regulator; else if (regulator_desc->supply_name) - supply = regulator_desc->supply_name; - - if (supply) { - struct regulator_dev *r; + rdev->supply_name = regulator_desc->supply_name; - r = regulator_dev_lookup(dev, supply, &ret); - - if (ret == -ENODEV) { - /* - * No supply was specified for this regulator and - * there will never be one. - */ - ret = 0; - goto add_dev; - } else if (!r) { - dev_err(dev, "Failed to find supply %s\n", supply); - ret = -EPROBE_DEFER; - goto scrub; - } - - ret = set_supply(rdev, r); - if (ret < 0) - goto scrub; - - /* Enable supply if rail is enabled */ - if (_regulator_is_enabled(rdev)) { - ret = regulator_enable(rdev->supply); - if (ret < 0) - goto scrub; - } - } - -add_dev: /* add consumers devices */ if (init_data) { for (i = 0; i < init_data->num_consumer_supplies; i++) { @@ -3702,8 +3744,6 @@ unset_supplies: unset_regulator_supplies(rdev); scrub: - if (rdev->supply) - _regulator_put(rdev->supply); regulator_ena_gpio_free(rdev); kfree(rdev->constraints); wash: @@ -3936,6 +3976,110 @@ static const struct file_operations supply_map_fops = { #endif }; +#ifdef CONFIG_DEBUG_FS +static void regulator_summary_show_subtree(struct seq_file *s, + struct regulator_dev *rdev, + int level) +{ + struct list_head *list = s->private; + struct regulator_dev *child; + struct regulation_constraints *c; + struct regulator *consumer; + + if (!rdev) + return; + + seq_printf(s, "%*s%-*s %3d %4d %6d ", + level * 3 + 1, "", + 30 - level * 3, rdev_get_name(rdev), + rdev->use_count, rdev->open_count, rdev->bypass_count); + + seq_printf(s, "%5dmV ", _regulator_get_voltage(rdev) / 1000); + seq_printf(s, "%5dmA ", _regulator_get_current_limit(rdev) / 1000); + + c = rdev->constraints; + if (c) { + switch (rdev->desc->type) { + case REGULATOR_VOLTAGE: + seq_printf(s, "%5dmV %5dmV ", + c->min_uV / 1000, c->max_uV / 1000); + break; + case REGULATOR_CURRENT: + seq_printf(s, "%5dmA %5dmA ", + c->min_uA / 1000, c->max_uA / 1000); + break; + } + } + + seq_puts(s, "\n"); + + list_for_each_entry(consumer, &rdev->consumer_list, list) { + if (consumer->dev->class == ®ulator_class) + continue; + + seq_printf(s, "%*s%-*s ", + (level + 1) * 3 + 1, "", + 30 - (level + 1) * 3, dev_name(consumer->dev)); + + switch (rdev->desc->type) { + case REGULATOR_VOLTAGE: + seq_printf(s, "%37dmV %5dmV", + consumer->min_uV / 1000, + consumer->max_uV / 1000); + break; + case REGULATOR_CURRENT: + break; + } + + seq_puts(s, "\n"); + } + + list_for_each_entry(child, list, list) { + /* handle only non-root regulators supplied by current rdev */ + if (!child->supply || child->supply->rdev != rdev) + continue; + + regulator_summary_show_subtree(s, child, level + 1); + } +} + +static int regulator_summary_show(struct seq_file *s, void *data) +{ + struct list_head *list = s->private; + struct regulator_dev *rdev; + + seq_puts(s, " regulator use open bypass voltage current min max\n"); + seq_puts(s, "-------------------------------------------------------------------------------\n"); + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(rdev, list, list) { + if (rdev->supply) + continue; + + regulator_summary_show_subtree(s, rdev, 0); + } + + mutex_unlock(®ulator_list_mutex); + + return 0; +} + +static int regulator_summary_open(struct inode *inode, struct file *file) +{ + return single_open(file, regulator_summary_show, inode->i_private); +} +#endif + +static const struct file_operations regulator_summary_fops = { +#ifdef CONFIG_DEBUG_FS + .open = regulator_summary_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +#endif +}; + static int __init regulator_init(void) { int ret; @@ -3949,6 +4093,9 @@ static int __init regulator_init(void) debugfs_create_file("supply_map", 0444, debugfs_root, NULL, &supply_map_fops); + debugfs_create_file("regulator_summary", 0444, debugfs_root, + ®ulator_list, ®ulator_summary_fops); + regulator_dummy_init(); return ret; diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index 01343419555e..df79e4b1946e 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -305,8 +305,7 @@ static irqreturn_t da9211_irq_handler(int irq, void *data) if (reg_val & DA9211_E_OV_CURR_A) { regulator_notifier_call_chain(chip->rdev[0], - REGULATOR_EVENT_OVER_CURRENT, - rdev_get_drvdata(chip->rdev[0])); + REGULATOR_EVENT_OVER_CURRENT, NULL); err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, DA9211_E_OV_CURR_A); @@ -318,8 +317,7 @@ static irqreturn_t da9211_irq_handler(int irq, void *data) if (reg_val & DA9211_E_OV_CURR_B) { regulator_notifier_call_chain(chip->rdev[1], - REGULATOR_EVENT_OVER_CURRENT, - rdev_get_drvdata(chip->rdev[1])); + REGULATOR_EVENT_OVER_CURRENT, NULL); err = regmap_write(chip->regmap, DA9211_REG_EVENT_B, DA9211_E_OV_CURR_B); @@ -344,7 +342,7 @@ static int da9211_regulator_init(struct da9211 *chip) ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data); if (ret < 0) { - dev_err(chip->dev, "Failed to read CONTROL_E reg: %d\n", ret); + dev_err(chip->dev, "Failed to read CONFIG_E reg: %d\n", ret); return ret; } diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index 2d16b9f16de7..3963dfad766c 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -95,14 +95,9 @@ void ux500_regulator_resume_debug(void) static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p) { - struct device *dev = s->private; - int err; - /* print power state count */ - err = seq_printf(s, "ux500-regulator power state count: %i\n", - power_state_active_get()); - if (err < 0) - dev_err(dev, "seq_printf overflow\n"); + seq_printf(s, "ux500-regulator power state count: %i\n", + power_state_active_get()); return 0; } @@ -124,19 +119,11 @@ static const struct file_operations ux500_regulator_power_state_cnt_fops = { static int ux500_regulator_status_print(struct seq_file *s, void *p) { - struct device *dev = s->private; - int err; int i; /* print dump header */ - err = seq_puts(s, "ux500-regulator status:\n"); - if (err < 0) - dev_err(dev, "seq_puts overflow\n"); - - err = seq_printf(s, "%31s : %8s : %8s\n", "current", - "before", "after"); - if (err < 0) - dev_err(dev, "seq_printf overflow\n"); + seq_puts(s, "ux500-regulator status:\n"); + seq_printf(s, "%31s : %8s : %8s\n", "current", "before", "after"); for (i = 0; i < rdebug.num_regulators; i++) { struct dbx500_regulator_info *info; @@ -144,12 +131,11 @@ static int ux500_regulator_status_print(struct seq_file *s, void *p) info = &rdebug.regulator_array[i]; /* print status */ - err = seq_printf(s, "%20s : %8s : %8s : %8s\n", info->desc.name, - info->is_enabled ? "enabled" : "disabled", - rdebug.state_before_suspend[i] ? "enabled" : "disabled", - rdebug.state_after_suspend[i] ? "enabled" : "disabled"); - if (err < 0) - dev_err(dev, "seq_printf overflow\n"); + seq_printf(s, "%20s : %8s : %8s : %8s\n", + info->desc.name, + info->is_enabled ? "enabled" : "disabled", + rdebug.state_before_suspend[i] ? "enabled" : "disabled", + rdebug.state_after_suspend[i] ? "enabled" : "disabled"); } return 0; diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c index 8f785bc9e510..6ec1d400adae 100644 --- a/drivers/regulator/devres.c +++ b/drivers/regulator/devres.c @@ -413,3 +413,88 @@ void devm_regulator_bulk_unregister_supply_alias(struct device *dev, devm_regulator_unregister_supply_alias(dev, id[i]); } EXPORT_SYMBOL_GPL(devm_regulator_bulk_unregister_supply_alias); + +struct regulator_notifier_match { + struct regulator *regulator; + struct notifier_block *nb; +}; + +static int devm_regulator_match_notifier(struct device *dev, void *res, + void *data) +{ + struct regulator_notifier_match *match = res; + struct regulator_notifier_match *target = data; + + return match->regulator == target->regulator && match->nb == target->nb; +} + +static void devm_regulator_destroy_notifier(struct device *dev, void *res) +{ + struct regulator_notifier_match *match = res; + + regulator_unregister_notifier(match->regulator, match->nb); +} + +/** + * devm_regulator_register_notifier - Resource managed + * regulator_register_notifier + * + * @regulator: regulator source + * @nb: notifier block + * + * The notifier will be registers under the consumer device and be + * automatically be unregistered when the source device is unbound. + */ +int devm_regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + struct regulator_notifier_match *match; + int ret; + + match = devres_alloc(devm_regulator_destroy_notifier, + sizeof(struct regulator_notifier_match), + GFP_KERNEL); + if (!match) + return -ENOMEM; + + match->regulator = regulator; + match->nb = nb; + + ret = regulator_register_notifier(regulator, nb); + if (ret < 0) { + devres_free(match); + return ret; + } + + devres_add(regulator->dev, match); + + return 0; +} +EXPORT_SYMBOL_GPL(devm_regulator_register_notifier); + +/** + * devm_regulator_unregister_notifier - Resource managed + * regulator_unregister_notifier() + * + * @regulator: regulator source + * @nb: notifier block + * + * Unregister a notifier registered with devm_regulator_register_notifier(). + * Normally this function will not need to be called and the resource + * management code will ensure that the resource is freed. + */ +void devm_regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + struct regulator_notifier_match match; + int rc; + + match.regulator = regulator; + match.nb = nb; + + rc = devres_release(regulator->dev, devm_regulator_destroy_notifier, + devm_regulator_match_notifier, &match); + if (rc != 0) + WARN_ON(rc); +} +EXPORT_SYMBOL_GPL(devm_regulator_unregister_notifier); diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c index 07b313e51b21..9665a488e2f1 100644 --- a/drivers/regulator/max77693.c +++ b/drivers/regulator/max77693.c @@ -128,6 +128,8 @@ static struct regulator_ops max77693_charger_ops = { #define regulator_desc_esafeout(_num) { \ .name = "ESAFEOUT"#_num, \ .id = MAX77693_ESAFEOUT##_num, \ + .of_match = of_match_ptr("ESAFEOUT"#_num), \ + .regulators_node = of_match_ptr("regulators"), \ .n_voltages = 4, \ .ops = &max77693_safeout_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -145,6 +147,8 @@ static const struct regulator_desc regulators[] = { { .name = "CHARGER", .id = MAX77693_CHARGER, + .of_match = of_match_ptr("CHARGER"), + .regulators_node = of_match_ptr("regulators"), .ops = &max77693_charger_ops, .type = REGULATOR_CURRENT, .owner = THIS_MODULE, @@ -154,102 +158,23 @@ static const struct regulator_desc regulators[] = { }, }; -#ifdef CONFIG_OF -static int max77693_pmic_dt_parse_rdata(struct device *dev, - struct max77693_regulator_data **rdata) -{ - struct device_node *np; - struct of_regulator_match *rmatch; - struct max77693_regulator_data *tmp; - int i, matched = 0; - - np = of_get_child_by_name(dev->parent->of_node, "regulators"); - if (!np) - return -EINVAL; - - rmatch = devm_kzalloc(dev, - sizeof(*rmatch) * ARRAY_SIZE(regulators), GFP_KERNEL); - if (!rmatch) { - of_node_put(np); - return -ENOMEM; - } - - for (i = 0; i < ARRAY_SIZE(regulators); i++) - rmatch[i].name = regulators[i].name; - - matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(regulators)); - of_node_put(np); - if (matched <= 0) - return matched; - *rdata = devm_kzalloc(dev, sizeof(**rdata) * matched, GFP_KERNEL); - if (!(*rdata)) - return -ENOMEM; - - tmp = *rdata; - - for (i = 0; i < matched; i++) { - tmp->initdata = rmatch[i].init_data; - tmp->of_node = rmatch[i].of_node; - tmp->id = regulators[i].id; - tmp++; - } - - return matched; -} -#else -static int max77693_pmic_dt_parse_rdata(struct device *dev, - struct max77693_regulator_data **rdata) -{ - return 0; -} -#endif /* CONFIG_OF */ - -static int max77693_pmic_init_rdata(struct device *dev, - struct max77693_regulator_data **rdata) -{ - struct max77693_platform_data *pdata; - int num_regulators = 0; - - pdata = dev_get_platdata(dev->parent); - if (pdata) { - *rdata = pdata->regulators; - num_regulators = pdata->num_regulators; - } - - if (!(*rdata) && dev->parent->of_node) - num_regulators = max77693_pmic_dt_parse_rdata(dev, rdata); - - return num_regulators; -} - static int max77693_pmic_probe(struct platform_device *pdev) { struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max77693_regulator_data *rdata = NULL; - int num_rdata, i; + int i; struct regulator_config config = { }; - num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata); - if (!rdata || num_rdata <= 0) { - dev_err(&pdev->dev, "No init data supplied.\n"); - return -ENODEV; - } - - config.dev = &pdev->dev; + config.dev = iodev->dev; config.regmap = iodev->regmap; - for (i = 0; i < num_rdata; i++) { - int id = rdata[i].id; + for (i = 0; i < ARRAY_SIZE(regulators); i++) { struct regulator_dev *rdev; - config.init_data = rdata[i].initdata; - config.of_node = rdata[i].of_node; - rdev = devm_regulator_register(&pdev->dev, - ®ulators[id], &config); + ®ulators[i], &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, - "Failed to initialize regulator-%d\n", id); + "Failed to initialize regulator-%d\n", i); return PTR_ERR(rdev); } } diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c index 7eee2ca18541..4071d74fa828 100644 --- a/drivers/regulator/max8660.c +++ b/drivers/regulator/max8660.c @@ -382,7 +382,7 @@ static int max8660_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { struct device *dev = &client->dev; - struct max8660_platform_data *pdata = dev_get_platdata(dev); + struct max8660_platform_data pdata_of, *pdata = dev_get_platdata(dev); struct regulator_config config = { }; struct max8660 *max8660; int boot_on, i, id, ret = -EINVAL; @@ -391,7 +391,6 @@ static int max8660_probe(struct i2c_client *client, if (dev->of_node && !pdata) { const struct of_device_id *id; - struct max8660_platform_data pdata_of; id = of_match_device(of_match_ptr(max8660_dt_ids), dev); if (!id) @@ -443,9 +442,9 @@ static int max8660_probe(struct i2c_client *client, for (i = 0; i < pdata->num_subdevs; i++) { if (!pdata->subdevs[i].platform_data) - return ret; - - boot_on = pdata->subdevs[i].platform_data->constraints.boot_on; + boot_on = false; + else + boot_on = pdata->subdevs[i].platform_data->constraints.boot_on; switch (pdata->subdevs[i].id) { case MAX8660_V3: diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 18198316b6cf..8217613807d3 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -916,6 +916,9 @@ static int palmas_ldo_registration(struct palmas_pmic *pmic, (id == PALMAS_REG_LDO6)) desc->enable_time = 2000; } else { + if (!ddata->has_regen3 && id == PALMAS_REG_REGEN3) + continue; + desc->n_voltages = 1; if (reg_init && reg_init->roof_floor) desc->ops = &palmas_ops_ext_control_extreg; @@ -1398,6 +1401,7 @@ static struct palmas_pmic_driver_data palmas_ddata = { .ldo_begin = PALMAS_REG_LDO1, .ldo_end = PALMAS_REG_LDOUSB, .max_reg = PALMAS_NUM_REGS, + .has_regen3 = true, .palmas_regs_info = palmas_generic_regs_info, .palmas_matches = palmas_matches, .sleep_req_info = palma_sleep_req_info, @@ -1411,6 +1415,7 @@ static struct palmas_pmic_driver_data tps65917_ddata = { .ldo_begin = TPS65917_REG_LDO1, .ldo_end = TPS65917_REG_LDO5, .max_reg = TPS65917_NUM_REGS, + .has_regen3 = true, .palmas_regs_info = tps65917_regs_info, .palmas_matches = tps65917_matches, .sleep_req_info = tps65917_sleep_req_info, @@ -1505,7 +1510,7 @@ static void palmas_dt_to_pdata(struct device *dev, pdata->ldo6_vibrator = of_property_read_bool(node, "ti,ldo6-vibrator"); } -static struct of_device_id of_palmas_match_tbl[] = { +static const struct of_device_id of_palmas_match_tbl[] = { { .compatible = "ti,palmas-pmic", .data = &palmas_ddata, @@ -1572,9 +1577,11 @@ static int palmas_regulators_probe(struct platform_device *pdev) if (!pmic) return -ENOMEM; - if (of_device_is_compatible(node, "ti,tps659038-pmic")) + if (of_device_is_compatible(node, "ti,tps659038-pmic")) { palmas_generic_regs_info[PALMAS_REG_REGEN2].ctrl_addr = TPS659038_REGEN2_CTRL; + palmas_ddata.has_regen3 = false; + } pmic->dev = &pdev->dev; pmic->palmas = palmas; diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 00c5cc3d9546..e254272585b2 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -393,6 +393,28 @@ static int rpm_reg_is_enabled(struct regulator_dev *rdev) return vreg->is_enabled; } +static int rpm_reg_set_load(struct regulator_dev *rdev, int load_uA) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->ia; + int load_mA = load_uA / 1000; + int max_mA = req->mask >> req->shift; + int ret; + + if (req->mask == 0) + return -EINVAL; + + if (load_mA > max_mA) + load_mA = max_mA; + + mutex_lock(&vreg->lock); + ret = rpm_reg_write(vreg, req, load_mA); + mutex_unlock(&vreg->lock); + + return ret; +} + static struct regulator_ops uV_ops = { .list_voltage = regulator_list_voltage_linear_range, @@ -402,6 +424,8 @@ static struct regulator_ops uV_ops = { .enable = rpm_reg_uV_enable, .disable = rpm_reg_uV_disable, .is_enabled = rpm_reg_is_enabled, + + .set_load = rpm_reg_set_load, }; static struct regulator_ops mV_ops = { @@ -413,6 +437,8 @@ static struct regulator_ops mV_ops = { .enable = rpm_reg_mV_enable, .disable = rpm_reg_mV_disable, .is_enabled = rpm_reg_is_enabled, + + .set_load = rpm_reg_set_load, }; static struct regulator_ops switch_ops = { @@ -581,31 +607,6 @@ static const struct qcom_rpm_reg smb208_smps = { .supports_force_mode_bypass = false, }; -static const struct of_device_id rpm_of_match[] = { - { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo }, - { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo }, - { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps }, - { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp }, - { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch }, - - { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo }, - { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo }, - { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps }, - { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch }, - - { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo }, - { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo }, - { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 }, - { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps }, - { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps }, - { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp }, - { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch }, - - { .compatible = "qcom,rpm-smb208", .data = &smb208_smps }, - { } -}; -MODULE_DEVICE_TABLE(of, rpm_of_match); - static int rpm_reg_set(struct qcom_rpm_reg *vreg, const struct request_member *req, const int value) @@ -619,7 +620,9 @@ static int rpm_reg_set(struct qcom_rpm_reg *vreg, return 0; } -static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg) +static int rpm_reg_of_parse_freq(struct device *dev, + struct device_node *node, + struct qcom_rpm_reg *vreg) { static const int freq_table[] = { 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000, @@ -633,7 +636,7 @@ static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg) int i; key = "qcom,switch-mode-frequency"; - ret = of_property_read_u32(dev->of_node, key, &freq); + ret = of_property_read_u32(node, key, &freq); if (ret) { dev_err(dev, "regulator requires %s property\n", key); return -EINVAL; @@ -650,84 +653,40 @@ static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg) return -EINVAL; } -static int rpm_reg_probe(struct platform_device *pdev) +static int rpm_reg_of_parse(struct device_node *node, + const struct regulator_desc *desc, + struct regulator_config *config) { - struct regulator_init_data *initdata; - const struct qcom_rpm_reg *template; - const struct of_device_id *match; - struct regulator_config config = { }; - struct regulator_dev *rdev; - struct qcom_rpm_reg *vreg; + struct qcom_rpm_reg *vreg = config->driver_data; + struct device *dev = config->dev; const char *key; u32 force_mode; bool pwm; u32 val; int ret; - match = of_match_device(rpm_of_match, &pdev->dev); - template = match->data; - - vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL); - if (!vreg) { - dev_err(&pdev->dev, "failed to allocate vreg\n"); - return -ENOMEM; - } - memcpy(vreg, template, sizeof(*vreg)); - mutex_init(&vreg->lock); - vreg->dev = &pdev->dev; - vreg->desc.id = -1; - vreg->desc.owner = THIS_MODULE; - vreg->desc.type = REGULATOR_VOLTAGE; - vreg->desc.name = pdev->dev.of_node->name; - vreg->desc.supply_name = "vin"; - - vreg->rpm = dev_get_drvdata(pdev->dev.parent); - if (!vreg->rpm) { - dev_err(&pdev->dev, "unable to retrieve handle to rpm\n"); - return -ENODEV; - } - - initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node, - &vreg->desc); - if (!initdata) - return -EINVAL; - - key = "reg"; - ret = of_property_read_u32(pdev->dev.of_node, key, &val); - if (ret) { - dev_err(&pdev->dev, "failed to read %s\n", key); - return ret; - } - vreg->resource = val; - - if ((vreg->parts->uV.mask || vreg->parts->mV.mask) && - (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) { - dev_err(&pdev->dev, "no voltage specified for regulator\n"); - return -EINVAL; - } - key = "bias-pull-down"; - if (of_property_read_bool(pdev->dev.of_node, key)) { + if (of_property_read_bool(node, key)) { ret = rpm_reg_set(vreg, &vreg->parts->pd, 1); if (ret) { - dev_err(&pdev->dev, "%s is invalid", key); + dev_err(dev, "%s is invalid", key); return ret; } } if (vreg->parts->freq.mask) { - ret = rpm_reg_of_parse_freq(&pdev->dev, vreg); + ret = rpm_reg_of_parse_freq(dev, node, vreg); if (ret < 0) return ret; } if (vreg->parts->pm.mask) { key = "qcom,power-mode-hysteretic"; - pwm = !of_property_read_bool(pdev->dev.of_node, key); + pwm = !of_property_read_bool(node, key); ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm); if (ret) { - dev_err(&pdev->dev, "failed to set power mode\n"); + dev_err(dev, "failed to set power mode\n"); return ret; } } @@ -736,11 +695,11 @@ static int rpm_reg_probe(struct platform_device *pdev) force_mode = -1; key = "qcom,force-mode"; - ret = of_property_read_u32(pdev->dev.of_node, key, &val); + ret = of_property_read_u32(node, key, &val); if (ret == -EINVAL) { val = QCOM_RPM_FORCE_MODE_NONE; } else if (ret < 0) { - dev_err(&pdev->dev, "failed to read %s\n", key); + dev_err(dev, "failed to read %s\n", key); return ret; } @@ -775,25 +734,192 @@ static int rpm_reg_probe(struct platform_device *pdev) } if (force_mode == -1) { - dev_err(&pdev->dev, "invalid force mode\n"); + dev_err(dev, "invalid force mode\n"); return -EINVAL; } ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode); if (ret) { - dev_err(&pdev->dev, "failed to set force mode\n"); + dev_err(dev, "failed to set force mode\n"); return ret; } } - config.dev = &pdev->dev; - config.init_data = initdata; - config.driver_data = vreg; - config.of_node = pdev->dev.of_node; - rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config); - if (IS_ERR(rdev)) { - dev_err(&pdev->dev, "can't register regulator\n"); - return PTR_ERR(rdev); + return 0; +} + +struct rpm_regulator_data { + const char *name; + int resource; + const struct qcom_rpm_reg *template; + const char *supply; +}; + +static const struct rpm_regulator_data rpm_pm8058_regulators[] = { + { "l0", QCOM_RPM_PM8058_LDO0, &pm8058_nldo, "vdd_l0_l1_lvs" }, + { "l1", QCOM_RPM_PM8058_LDO1, &pm8058_nldo, "vdd_l0_l1_lvs" }, + { "l2", QCOM_RPM_PM8058_LDO2, &pm8058_pldo, "vdd_l2_l11_l12" }, + { "l3", QCOM_RPM_PM8058_LDO3, &pm8058_pldo, "vdd_l3_l4_l5" }, + { "l4", QCOM_RPM_PM8058_LDO4, &pm8058_pldo, "vdd_l3_l4_l5" }, + { "l5", QCOM_RPM_PM8058_LDO5, &pm8058_pldo, "vdd_l3_l4_l5" }, + { "l6", QCOM_RPM_PM8058_LDO6, &pm8058_pldo, "vdd_l6_l7" }, + { "l7", QCOM_RPM_PM8058_LDO7, &pm8058_pldo, "vdd_l6_l7" }, + { "l8", QCOM_RPM_PM8058_LDO8, &pm8058_pldo, "vdd_l8" }, + { "l9", QCOM_RPM_PM8058_LDO9, &pm8058_pldo, "vdd_l9" }, + { "l10", QCOM_RPM_PM8058_LDO10, &pm8058_pldo, "vdd_l10" }, + { "l11", QCOM_RPM_PM8058_LDO11, &pm8058_pldo, "vdd_l2_l11_l12" }, + { "l12", QCOM_RPM_PM8058_LDO12, &pm8058_pldo, "vdd_l2_l11_l12" }, + { "l13", QCOM_RPM_PM8058_LDO13, &pm8058_pldo, "vdd_l13_l16" }, + { "l14", QCOM_RPM_PM8058_LDO14, &pm8058_pldo, "vdd_l14_l15" }, + { "l15", QCOM_RPM_PM8058_LDO15, &pm8058_pldo, "vdd_l14_l15" }, + { "l16", QCOM_RPM_PM8058_LDO16, &pm8058_pldo, "vdd_l13_l16" }, + { "l17", QCOM_RPM_PM8058_LDO17, &pm8058_pldo, "vdd_l17_l18" }, + { "l18", QCOM_RPM_PM8058_LDO18, &pm8058_pldo, "vdd_l17_l18" }, + { "l19", QCOM_RPM_PM8058_LDO19, &pm8058_pldo, "vdd_l19_l20" }, + { "l20", QCOM_RPM_PM8058_LDO20, &pm8058_pldo, "vdd_l19_l20" }, + { "l21", QCOM_RPM_PM8058_LDO21, &pm8058_nldo, "vdd_l21" }, + { "l22", QCOM_RPM_PM8058_LDO22, &pm8058_nldo, "vdd_l22" }, + { "l23", QCOM_RPM_PM8058_LDO23, &pm8058_nldo, "vdd_l23_l24_l25" }, + { "l24", QCOM_RPM_PM8058_LDO24, &pm8058_nldo, "vdd_l23_l24_l25" }, + { "l25", QCOM_RPM_PM8058_LDO25, &pm8058_nldo, "vdd_l23_l24_l25" }, + + { "s0", QCOM_RPM_PM8058_SMPS0, &pm8058_smps, "vdd_s0" }, + { "s1", QCOM_RPM_PM8058_SMPS1, &pm8058_smps, "vdd_s1" }, + { "s2", QCOM_RPM_PM8058_SMPS2, &pm8058_smps, "vdd_s2" }, + { "s3", QCOM_RPM_PM8058_SMPS3, &pm8058_smps, "vdd_s3" }, + { "s4", QCOM_RPM_PM8058_SMPS4, &pm8058_smps, "vdd_s4" }, + + { "lvs0", QCOM_RPM_PM8058_LVS0, &pm8058_switch, "vdd_l0_l1_lvs" }, + { "lvs1", QCOM_RPM_PM8058_LVS1, &pm8058_switch, "vdd_l0_l1_lvs" }, + + { "ncp", QCOM_RPM_PM8058_NCP, &pm8058_ncp, "vdd_ncp" }, + { } +}; + +static const struct rpm_regulator_data rpm_pm8901_regulators[] = { + { "l0", QCOM_RPM_PM8901_LDO0, &pm8901_nldo, "vdd_l0" }, + { "l1", QCOM_RPM_PM8901_LDO1, &pm8901_pldo, "vdd_l1" }, + { "l2", QCOM_RPM_PM8901_LDO2, &pm8901_pldo, "vdd_l2" }, + { "l3", QCOM_RPM_PM8901_LDO3, &pm8901_pldo, "vdd_l3" }, + { "l4", QCOM_RPM_PM8901_LDO4, &pm8901_pldo, "vdd_l4" }, + { "l5", QCOM_RPM_PM8901_LDO5, &pm8901_pldo, "vdd_l5" }, + { "l6", QCOM_RPM_PM8901_LDO6, &pm8901_pldo, "vdd_l6" }, + + { "s0", QCOM_RPM_PM8901_SMPS0, &pm8901_ftsmps, "vdd_s0" }, + { "s1", QCOM_RPM_PM8901_SMPS1, &pm8901_ftsmps, "vdd_s1" }, + { "s2", QCOM_RPM_PM8901_SMPS2, &pm8901_ftsmps, "vdd_s2" }, + { "s3", QCOM_RPM_PM8901_SMPS3, &pm8901_ftsmps, "vdd_s3" }, + { "s4", QCOM_RPM_PM8901_SMPS4, &pm8901_ftsmps, "vdd_s4" }, + + { "lvs0", QCOM_RPM_PM8901_LVS0, &pm8901_switch, "lvs0_in" }, + { "lvs1", QCOM_RPM_PM8901_LVS1, &pm8901_switch, "lvs1_in" }, + { "lvs2", QCOM_RPM_PM8901_LVS2, &pm8901_switch, "lvs2_in" }, + { "lvs3", QCOM_RPM_PM8901_LVS3, &pm8901_switch, "lvs3_in" }, + + { "mvs", QCOM_RPM_PM8901_MVS, &pm8901_switch, "mvs_in" }, + { } +}; + +static const struct rpm_regulator_data rpm_pm8921_regulators[] = { + { "s1", QCOM_RPM_PM8921_SMPS1, &pm8921_smps, "vdd_s1" }, + { "s2", QCOM_RPM_PM8921_SMPS2, &pm8921_smps, "vdd_s2" }, + { "s3", QCOM_RPM_PM8921_SMPS3, &pm8921_smps }, + { "s4", QCOM_RPM_PM8921_SMPS4, &pm8921_smps, "vdd_s4" }, + { "s7", QCOM_RPM_PM8921_SMPS7, &pm8921_smps, "vdd_s7" }, + { "s8", QCOM_RPM_PM8921_SMPS8, &pm8921_smps, "vdd_s8" }, + + { "l1", QCOM_RPM_PM8921_LDO1, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, + { "l2", QCOM_RPM_PM8921_LDO2, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, + { "l3", QCOM_RPM_PM8921_LDO3, &pm8921_pldo, "vdd_l3_l15_l17" }, + { "l4", QCOM_RPM_PM8921_LDO4, &pm8921_pldo, "vdd_l4_l14" }, + { "l5", QCOM_RPM_PM8921_LDO5, &pm8921_pldo, "vdd_l5_l8_l16" }, + { "l6", QCOM_RPM_PM8921_LDO6, &pm8921_pldo, "vdd_l6_l7" }, + { "l7", QCOM_RPM_PM8921_LDO7, &pm8921_pldo, "vdd_l6_l7" }, + { "l8", QCOM_RPM_PM8921_LDO8, &pm8921_pldo, "vdd_l5_l8_l16" }, + { "l9", QCOM_RPM_PM8921_LDO9, &pm8921_pldo, "vdd_l9_l11" }, + { "l10", QCOM_RPM_PM8921_LDO10, &pm8921_pldo, "vdd_l10_l22" }, + { "l11", QCOM_RPM_PM8921_LDO11, &pm8921_pldo, "vdd_l9_l11" }, + { "l12", QCOM_RPM_PM8921_LDO12, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, + { "l14", QCOM_RPM_PM8921_LDO14, &pm8921_pldo, "vdd_l4_l14" }, + { "l15", QCOM_RPM_PM8921_LDO15, &pm8921_pldo, "vdd_l3_l15_l17" }, + { "l16", QCOM_RPM_PM8921_LDO16, &pm8921_pldo, "vdd_l5_l8_l16" }, + { "l17", QCOM_RPM_PM8921_LDO17, &pm8921_pldo, "vdd_l3_l15_l17" }, + { "l18", QCOM_RPM_PM8921_LDO18, &pm8921_nldo, "vdd_l1_l2_l12_l18" }, + { "l21", QCOM_RPM_PM8921_LDO21, &pm8921_pldo, "vdd_l21_l23_l29" }, + { "l22", QCOM_RPM_PM8921_LDO22, &pm8921_pldo, "vdd_l10_l22" }, + { "l23", QCOM_RPM_PM8921_LDO23, &pm8921_pldo, "vdd_l21_l23_l29" }, + { "l24", QCOM_RPM_PM8921_LDO24, &pm8921_nldo1200, "vdd_l24" }, + { "l25", QCOM_RPM_PM8921_LDO25, &pm8921_nldo1200, "vdd_l25" }, + { "l26", QCOM_RPM_PM8921_LDO26, &pm8921_nldo1200, "vdd_l26" }, + { "l27", QCOM_RPM_PM8921_LDO27, &pm8921_nldo1200, "vdd_l27" }, + { "l28", QCOM_RPM_PM8921_LDO28, &pm8921_nldo1200, "vdd_l28" }, + { "l29", QCOM_RPM_PM8921_LDO29, &pm8921_pldo, "vdd_l21_l23_l29" }, + + { "lvs1", QCOM_RPM_PM8921_LVS1, &pm8921_switch, "vin_lvs1_3_6" }, + { "lvs2", QCOM_RPM_PM8921_LVS2, &pm8921_switch, "vin_lvs2" }, + { "lvs3", QCOM_RPM_PM8921_LVS3, &pm8921_switch, "vin_lvs1_3_6" }, + { "lvs4", QCOM_RPM_PM8921_LVS4, &pm8921_switch, "vin_lvs4_5_7" }, + { "lvs5", QCOM_RPM_PM8921_LVS5, &pm8921_switch, "vin_lvs4_5_7" }, + { "lvs6", QCOM_RPM_PM8921_LVS6, &pm8921_switch, "vin_lvs1_3_6" }, + { "lvs7", QCOM_RPM_PM8921_LVS7, &pm8921_switch, "vin_lvs4_5_7" }, + + { "usb-switch", QCOM_RPM_USB_OTG_SWITCH, &pm8921_switch, "vin_5vs" }, + { "hdmi-switch", QCOM_RPM_HDMI_SWITCH, &pm8921_switch, "vin_5vs" }, + { "ncp", QCOM_RPM_PM8921_NCP, &pm8921_ncp, "vdd_ncp" }, + { } +}; + +static const struct of_device_id rpm_of_match[] = { + { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators }, + { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators }, + { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators }, + { } +}; +MODULE_DEVICE_TABLE(of, rpm_of_match); + +static int rpm_reg_probe(struct platform_device *pdev) +{ + const struct rpm_regulator_data *reg; + const struct of_device_id *match; + struct regulator_config config = { }; + struct regulator_dev *rdev; + struct qcom_rpm_reg *vreg; + struct qcom_rpm *rpm; + + rpm = dev_get_drvdata(pdev->dev.parent); + if (!rpm) { + dev_err(&pdev->dev, "unable to retrieve handle to rpm\n"); + return -ENODEV; + } + + match = of_match_device(rpm_of_match, &pdev->dev); + for (reg = match->data; reg->name; reg++) { + vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL); + if (!vreg) + return -ENOMEM; + + memcpy(vreg, reg->template, sizeof(*vreg)); + mutex_init(&vreg->lock); + + vreg->dev = &pdev->dev; + vreg->resource = reg->resource; + vreg->rpm = rpm; + + vreg->desc.id = -1; + vreg->desc.owner = THIS_MODULE; + vreg->desc.type = REGULATOR_VOLTAGE; + vreg->desc.name = reg->name; + vreg->desc.supply_name = reg->supply; + vreg->desc.of_match = reg->name; + vreg->desc.of_parse_cb = rpm_reg_of_parse; + + config.dev = &pdev->dev; + config.driver_data = vreg; + rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", reg->name); + return PTR_ERR(rdev); + } } return 0; diff --git a/drivers/regulator/stw481x-vmmc.c b/drivers/regulator/stw481x-vmmc.c index 89025f560259..7d2ae3e9e942 100644 --- a/drivers/regulator/stw481x-vmmc.c +++ b/drivers/regulator/stw481x-vmmc.c @@ -56,6 +56,7 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev) { struct stw481x *stw481x = dev_get_platdata(&pdev->dev); struct regulator_config config = { }; + struct regulator_dev *rdev; int ret; /* First disable the external VMMC if it's active */ @@ -75,12 +76,11 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev) pdev->dev.of_node, &vmmc_regulator); - stw481x->vmmc_regulator = devm_regulator_register(&pdev->dev, - &vmmc_regulator, &config); - if (IS_ERR(stw481x->vmmc_regulator)) { + rdev = devm_regulator_register(&pdev->dev, &vmmc_regulator, &config); + if (IS_ERR(rdev)) { dev_err(&pdev->dev, "error initializing STw481x VMMC regulator\n"); - return PTR_ERR(stw481x->vmmc_regulator); + return PTR_ERR(rdev); } dev_info(&pdev->dev, "initialized STw481x VMMC regulator\n"); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7ec7c390eeda..95f6b040186e 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1151,17 +1151,16 @@ static const struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = { static irqreturn_t pmic_uv_handler(int irq, void *data) { struct regulator_dev *rdev = (struct regulator_dev *)data; - struct wm8350 *wm8350 = rdev_get_drvdata(rdev); mutex_lock(&rdev->mutex); if (irq == WM8350_IRQ_CS1 || irq == WM8350_IRQ_CS2) regulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, - wm8350); + NULL); else regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, - wm8350); + NULL); mutex_unlock(&rdev->mutex); return IRQ_HANDLED; diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 5d60a868830d..2aa85e398f76 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4225,22 +4225,15 @@ static struct scsi_host_template ufshcd_driver_template = { static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, int ua) { - int ret = 0; - struct regulator *reg = vreg->reg; - const char *name = vreg->name; + int ret; - BUG_ON(!vreg); + if (!vreg) + return 0; - ret = regulator_set_optimum_mode(reg, ua); - if (ret >= 0) { - /* - * regulator_set_optimum_mode() returns new regulator - * mode upon success. - */ - ret = 0; - } else { - dev_err(dev, "%s: %s set optimum mode(ua=%d) failed, err=%d\n", - __func__, name, ua, ret); + ret = regulator_set_load(vreg->reg, ua); + if (ret < 0) { + dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n", + __func__, vreg->name, ua, ret); } return ret; @@ -4249,18 +4242,12 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba, struct ufs_vreg *vreg) { - if (!vreg) - return 0; - return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA); } static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, struct ufs_vreg *vreg) { - if (!vreg) - return 0; - return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); } diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 0b1bd2369293..f5b3b928941b 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -277,7 +277,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab) dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n", ret); - ret = regulator_set_optimum_mode(ab->v_ulpi, 28000); + ret = regulator_set_load(ab->v_ulpi, 28000); if (ret < 0) dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n", ret); @@ -317,7 +317,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab) ab->saved_v_ulpi, ret); } - ret = regulator_set_optimum_mode(ab->v_ulpi, 0); + ret = regulator_set_load(ab->v_ulpi, 0); if (ret < 0) dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n", ret); diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 000fd892455f..6ed67ea4ef7e 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -142,27 +142,22 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) int ret = 0; if (on) { - ret = regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_HPM_LOAD); + ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD); if (ret < 0) { pr_err("Could not set HPM for v1p8\n"); return ret; } - ret = regulator_set_optimum_mode(motg->v3p3, - USB_PHY_3P3_HPM_LOAD); + ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD); if (ret < 0) { pr_err("Could not set HPM for v3p3\n"); - regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_LPM_LOAD); + regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD); return ret; } } else { - ret = regulator_set_optimum_mode(motg->v1p8, - USB_PHY_1P8_LPM_LOAD); + ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD); if (ret < 0) pr_err("Could not set LPM for v1p8\n"); - ret = regulator_set_optimum_mode(motg->v3p3, - USB_PHY_3P3_LPM_LOAD); + ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD); if (ret < 0) pr_err("Could not set LPM for v3p3\n"); } diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h index f0b6585cd874..09a4dedaeea8 100644 --- a/include/linux/mfd/max77693.h +++ b/include/linux/mfd/max77693.h @@ -30,7 +30,7 @@ #ifndef __LINUX_MFD_MAX77693_H #define __LINUX_MFD_MAX77693_H -/* MAX77686 regulator IDs */ +/* MAX77693 regulator IDs */ enum max77693_regulators { MAX77693_ESAFEOUT1 = 0, MAX77693_ESAFEOUT2, @@ -38,12 +38,6 @@ enum max77693_regulators { MAX77693_REG_MAX, }; -struct max77693_regulator_data { - int id; - struct regulator_init_data *initdata; - struct device_node *of_node; -}; - struct max77693_reg_data { u8 addr; u8 data; @@ -103,10 +97,6 @@ struct max77693_led_platform_data { /* MAX77693 */ struct max77693_platform_data { - /* regulator data */ - struct max77693_regulator_data *regulators; - int num_regulators; - /* muic data */ struct max77693_muic_platform_data *muic_data; struct max77693_led_platform_data *led_data; diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index ee7b1ce7a6f8..bb270bd03eed 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -117,6 +117,7 @@ struct palmas_pmic_driver_data { int ldo_begin; int ldo_end; int max_reg; + bool has_regen3; struct palmas_regs_info *palmas_regs_info; struct of_regulator_match *palmas_matches; struct palmas_sleep_requestor_info *sleep_req_info; diff --git a/include/linux/mfd/stw481x.h b/include/linux/mfd/stw481x.h index eda121556e5d..833074b766bd 100644 --- a/include/linux/mfd/stw481x.h +++ b/include/linux/mfd/stw481x.h @@ -41,15 +41,11 @@ /** * struct stw481x - state holder for the Stw481x drivers - * @mutex: mutex to serialize I2C accesses * @i2c_client: corresponding I2C client - * @regulator: regulator device for regulator children * @map: regmap handle to access device registers */ struct stw481x { - struct mutex lock; struct i2c_client *client; - struct regulator_dev *vmmc_regulator; struct regmap *map; }; diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h index b6c4909b33af..15fa8f2d35c9 100644 --- a/include/linux/regulator/act8865.h +++ b/include/linux/regulator/act8865.h @@ -19,6 +19,19 @@ #include <linux/regulator/machine.h> enum { + ACT8600_ID_DCDC1, + ACT8600_ID_DCDC2, + ACT8600_ID_DCDC3, + ACT8600_ID_SUDCDC4, + ACT8600_ID_LDO5, + ACT8600_ID_LDO6, + ACT8600_ID_LDO7, + ACT8600_ID_LDO8, + ACT8600_ID_LDO9, + ACT8600_ID_LDO10, +}; + +enum { ACT8865_ID_DCDC1, ACT8865_ID_DCDC2, ACT8865_ID_DCDC3, @@ -46,6 +59,7 @@ enum { }; enum { + ACT8600, ACT8865, ACT8846, }; diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index d17e1ff7ad01..f8a689ed62a5 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -114,7 +114,7 @@ struct regmap; #define REGULATOR_EVENT_OVER_TEMP 0x10 #define REGULATOR_EVENT_FORCE_DISABLE 0x20 #define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40 -#define REGULATOR_EVENT_DISABLE 0x80 +#define REGULATOR_EVENT_DISABLE 0x80 #define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100 #define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200 #define REGULATOR_EVENT_PRE_DISABLE 0x400 @@ -238,7 +238,7 @@ int regulator_get_current_limit(struct regulator *regulator); int regulator_set_mode(struct regulator *regulator, unsigned int mode); unsigned int regulator_get_mode(struct regulator *regulator); -int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); +int regulator_set_load(struct regulator *regulator, int load_uA); int regulator_allow_bypass(struct regulator *regulator, bool allow); @@ -252,8 +252,12 @@ int regulator_list_hardware_vsel(struct regulator *regulator, /* regulator notifier block */ int regulator_register_notifier(struct regulator *regulator, struct notifier_block *nb); +int devm_regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb); int regulator_unregister_notifier(struct regulator *regulator, struct notifier_block *nb); +void devm_regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb); /* driver data - core doesn't touch */ void *regulator_get_drvdata(struct regulator *regulator); @@ -479,8 +483,7 @@ static inline unsigned int regulator_get_mode(struct regulator *regulator) return REGULATOR_MODE_NORMAL; } -static inline int regulator_set_optimum_mode(struct regulator *regulator, - int load_uA) +static inline int regulator_set_load(struct regulator *regulator, int load_uA) { return REGULATOR_MODE_NORMAL; } @@ -515,12 +518,24 @@ static inline int regulator_register_notifier(struct regulator *regulator, return 0; } +static inline int devm_regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return 0; +} + static inline int regulator_unregister_notifier(struct regulator *regulator, struct notifier_block *nb) { return 0; } +static inline int devm_regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return 0; +} + static inline void *regulator_get_drvdata(struct regulator *regulator) { return NULL; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 045f709cb89b..fffa688ac3a7 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -98,6 +98,7 @@ struct regulator_linear_range { * REGULATOR_STATUS value (or negative errno) * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. + * @set_load: Set the load for the regulator. * * @set_bypass: Set the regulator in bypass mode. * @get_bypass: Get the regulator bypass mode state. @@ -167,6 +168,8 @@ struct regulator_ops { /* get most efficient regulator operating mode for load */ unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, int output_uV, int load_uA); + /* set the load on the regulator */ + int (*set_load)(struct regulator_dev *, int load_uA); /* control and report on bypass mode */ int (*set_bypass)(struct regulator_dev *dev, bool enable); @@ -367,6 +370,7 @@ struct regulator_dev { struct device dev; struct regulation_constraints *constraints; struct regulator *supply; /* for tree */ + const char *supply_name; struct regmap *regmap; struct delayed_work disable_work; |