diff options
| -rw-r--r-- | drivers/clocksource/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/clksrc_st_lpc.c | 123 |
3 files changed, 132 insertions, 0 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 4e57730e0be4..ae3ec9da0d15 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -293,4 +293,12 @@ config CLKSRC_IMX_GPT depends on ARM && CLKDEV_LOOKUP select CLKSRC_MMIO +config CLKSRC_ST_LPC + bool + depends on ARCH_STI + select CLKSRC_OF if OF + help + Enable this option to use the Low Power controller timer + as clocksource. + endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index f228354961ca..1c2c9d2cd859 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -60,3 +60,4 @@ obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o obj-$(CONFIG_H8300) += h8300_timer8.o obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o obj-$(CONFIG_H8300_TPU) += h8300_tpu.o +obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o diff --git a/drivers/clocksource/clksrc_st_lpc.c b/drivers/clocksource/clksrc_st_lpc.c new file mode 100644 index 000000000000..f38cf33281a2 --- /dev/null +++ b/drivers/clocksource/clksrc_st_lpc.c @@ -0,0 +1,123 @@ +/* + * Clocksource using the Low Power Timer found in the Low Power Controller (LPC) + * + * Copyright (C) 2015 STMicroelectronics – All Rights Reserved + * + * Author(s): Francesco Virlinzi <francesco.virlinzi@st.com> + * Ajit Pal Singh <ajitpal.singh@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/clocksource.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include <dt-bindings/mfd/st-lpc.h> + +/* Low Power Timer */ +#define LPC_LPT_LSB_OFF 0x400 +#define LPC_LPT_MSB_OFF 0x404 +#define LPC_LPT_START_OFF 0x408 + +static struct st_clksrc_ddata { + struct clk *clk; + void __iomem *base; +} ddata; + +static void __init st_clksrc_reset(void) +{ + writel_relaxed(0, ddata.base + LPC_LPT_START_OFF); + writel_relaxed(0, ddata.base + LPC_LPT_MSB_OFF); + writel_relaxed(0, ddata.base + LPC_LPT_LSB_OFF); + writel_relaxed(1, ddata.base + LPC_LPT_START_OFF); +} + +static int __init st_clksrc_init(void) +{ + unsigned long rate; + int ret; + + st_clksrc_reset(); + + rate = clk_get_rate(ddata.clk); + + ret = clocksource_mmio_init(ddata.base + LPC_LPT_LSB_OFF, + "clksrc-st-lpc", rate, 300, 32, + clocksource_mmio_readl_up); + if (ret) { + pr_err("clksrc-st-lpc: Failed to register clocksource\n"); + return ret; + } + + return 0; +} + +static int __init st_clksrc_setup_clk(struct device_node *np) +{ + struct clk *clk; + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + pr_err("clksrc-st-lpc: Failed to get LPC clock\n"); + return PTR_ERR(clk); + } + + if (clk_prepare_enable(clk)) { + pr_err("clksrc-st-lpc: Failed to enable LPC clock\n"); + return -EINVAL; + } + + if (!clk_get_rate(clk)) { + pr_err("clksrc-st-lpc: Failed to get LPC clock rate\n"); + clk_disable_unprepare(clk); + return -EINVAL; + } + + ddata.clk = clk; + + return 0; +} + +static void __init st_clksrc_of_register(struct device_node *np) +{ + int ret; + uint32_t mode; + + ret = of_property_read_u32(np, "st,lpc-mode", &mode); + if (ret) { + pr_err("clksrc-st-lpc: An LPC mode must be provided\n"); + return; + } + + /* LPC can either run as a Clocksource or in RTC or WDT mode */ + if (mode != ST_LPC_MODE_CLKSRC) + return; + + ddata.base = of_iomap(np, 0); + if (!ddata.base) { + pr_err("clksrc-st-lpc: Unable to map iomem\n"); + return; + } + + if (st_clksrc_setup_clk(np)) { + iounmap(ddata.base); + return; + } + + if (st_clksrc_init()) { + clk_disable_unprepare(ddata.clk); + clk_put(ddata.clk); + iounmap(ddata.base); + return; + } + + pr_info("clksrc-st-lpc: clocksource initialised - running @ %luHz\n", + clk_get_rate(ddata.clk)); +} +CLOCKSOURCE_OF_DECLARE(ddata, "st,stih407-lpc", st_clksrc_of_register); |