diff options
| -rw-r--r-- | Documentation/gpu/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/gpu/pl111.rst | 6 | ||||
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/pl111/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/gpu/drm/pl111/Makefile | 5 | ||||
| -rw-r--r-- | drivers/gpu/drm/pl111/pl111_connector.c | 127 | ||||
| -rw-r--r-- | drivers/gpu/drm/pl111/pl111_display.c | 344 | ||||
| -rw-r--r-- | drivers/gpu/drm/pl111/pl111_drm.h | 56 | ||||
| -rw-r--r-- | drivers/gpu/drm/pl111/pl111_drv.c | 272 |
11 files changed, 832 insertions, 0 deletions
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index c572f092739e..037a39ac1807 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -12,6 +12,7 @@ Linux GPU Driver Developer's Guide drm-uapi i915 meson + pl111 tinydrm vc4 vga-switcheroo diff --git a/Documentation/gpu/pl111.rst b/Documentation/gpu/pl111.rst new file mode 100644 index 000000000000..9b03736d33dd --- /dev/null +++ b/Documentation/gpu/pl111.rst @@ -0,0 +1,6 @@ +========================================== + drm/pl111 ARM PrimeCell PL111 CLCD Driver +========================================== + +.. kernel-doc:: drivers/gpu/drm/pl111/pl111_drv.c + :doc: ARM PrimeCell PL111 CLCD Driver diff --git a/MAINTAINERS b/MAINTAINERS index e8f86bc75006..3e66c28ffb68 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4160,6 +4160,12 @@ F: include/drm/drm* F: include/uapi/drm/drm* F: include/linux/vga* +DRM DRIVER FOR ARM PL111 CLCD +M: Eric Anholt <eric@anholt.net> +T: git git://anongit.freedesktop.org/drm/drm-misc +S: Supported +F: drivers/gpu/drm/pl111/ + DRM DRIVER FOR AST SERVER GRAPHICS CHIPS M: Dave Airlie <airlied@redhat.com> S: Odd Fixes diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f57540d2a783..83cb2a88c204 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -276,6 +276,8 @@ source "drivers/gpu/drm/meson/Kconfig" source "drivers/gpu/drm/tinydrm/Kconfig" +source "drivers/gpu/drm/pl111/Kconfig" + # Keep legacy drivers last menuconfig DRM_LEGACY diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index aa62ded7144e..c156fecfb362 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -97,3 +97,4 @@ obj-y += hisilicon/ obj-$(CONFIG_DRM_ZTE) += zte/ obj-$(CONFIG_DRM_MXSFB) += mxsfb/ obj-$(CONFIG_DRM_TINYDRM) += tinydrm/ +obj-$(CONFIG_DRM_PL111) += pl111/ diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig new file mode 100644 index 000000000000..ede49efd531f --- /dev/null +++ b/drivers/gpu/drm/pl111/Kconfig @@ -0,0 +1,12 @@ +config DRM_PL111 + tristate "DRM Support for PL111 CLCD Controller" + depends on DRM + depends on ARM || ARM64 || COMPILE_TEST + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select DRM_GEM_CMA_HELPER + select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE + help + Choose this option for DRM support for the PL111 CLCD controller. + If M is selected the module will be called pl111_drm. + diff --git a/drivers/gpu/drm/pl111/Makefile b/drivers/gpu/drm/pl111/Makefile new file mode 100644 index 000000000000..01caee727c13 --- /dev/null +++ b/drivers/gpu/drm/pl111/Makefile @@ -0,0 +1,5 @@ +pl111_drm-y += pl111_connector.o \ + pl111_display.o \ + pl111_drv.o + +obj-$(CONFIG_DRM_PL111) += pl111_drm.o diff --git a/drivers/gpu/drm/pl111/pl111_connector.c b/drivers/gpu/drm/pl111/pl111_connector.c new file mode 100644 index 000000000000..3f213d7e7692 --- /dev/null +++ b/drivers/gpu/drm/pl111/pl111_connector.c @@ -0,0 +1,127 @@ +/* + * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. + * + * Parts of this file were based on sources as follows: + * + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + * + */ + +/** + * pl111_drm_connector.c + * Implementation of the connector functions for PL111 DRM + */ +#include <linux/amba/clcd-regs.h> +#include <linux/version.h> +#include <linux/shmem_fs.h> +#include <linux/dma-buf.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> + +#include "pl111_drm.h" + +static void pl111_connector_destroy(struct drm_connector *connector) +{ + struct pl111_drm_connector *pl111_connector = + to_pl111_connector(connector); + + if (pl111_connector->panel) + drm_panel_detach(pl111_connector->panel); + + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +static enum drm_connector_status pl111_connector_detect(struct drm_connector + *connector, bool force) +{ + struct pl111_drm_connector *pl111_connector = + to_pl111_connector(connector); + + return (pl111_connector->panel ? + connector_status_connected : + connector_status_disconnected); +} + +static int pl111_connector_helper_get_modes(struct drm_connector *connector) +{ + struct pl111_drm_connector *pl111_connector = + to_pl111_connector(connector); + + if (!pl111_connector->panel) + return 0; + + return drm_panel_get_modes(pl111_connector->panel); +} + +const struct drm_connector_funcs connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = pl111_connector_destroy, + .detect = pl111_connector_detect, + .dpms = drm_atomic_helper_connector_dpms, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +const struct drm_connector_helper_funcs connector_helper_funcs = { + .get_modes = pl111_connector_helper_get_modes, +}; + +/* Walks the OF graph to find the panel node and then asks DRM to look + * up the panel. + */ +static struct drm_panel *pl111_get_panel(struct device *dev) +{ + struct device_node *endpoint, *panel_node; + struct device_node *np = dev->of_node; + struct drm_panel *panel; + + endpoint = of_graph_get_next_endpoint(np, NULL); + if (!endpoint) { + dev_err(dev, "no endpoint to fetch panel\n"); + return NULL; + } + + /* don't proceed if we have an endpoint but no panel_node tied to it */ + panel_node = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + if (!panel_node) { + dev_err(dev, "no valid panel node\n"); + return NULL; + } + + panel = of_drm_find_panel(panel_node); + of_node_put(panel_node); + + return panel; +} + +int pl111_connector_init(struct drm_device *dev) +{ + struct pl111_drm_dev_private *priv = dev->dev_private; + struct pl111_drm_connector *pl111_connector = &priv->connector; + struct drm_connector *connector = &pl111_connector->connector; + + drm_connector_init(dev, connector, &connector_funcs, + DRM_MODE_CONNECTOR_DPI); + drm_connector_helper_add(connector, &connector_helper_funcs); + + pl111_connector->panel = pl111_get_panel(dev->dev); + if (pl111_connector->panel) + drm_panel_attach(pl111_connector->panel, connector); + + return 0; +} + diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c new file mode 100644 index 000000000000..39a5c33bce7d --- /dev/null +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -0,0 +1,344 @@ +/* + * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. + * + * Parts of this file were based on sources as follows: + * + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + * + */ + +#include <linux/amba/clcd-regs.h> +#include <linux/clk.h> +#include <linux/version.h> +#include <linux/dma-buf.h> +#include <linux/of_graph.h> + +#include <drm/drmP.h> +#include <drm/drm_panel.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_fb_cma_helper.h> + +#include "pl111_drm.h" + +irqreturn_t pl111_irq(int irq, void *data) +{ + struct pl111_drm_dev_private *priv = data; + u32 irq_stat; + irqreturn_t status = IRQ_NONE; + + irq_stat = readl(priv->regs + CLCD_PL111_MIS); + + if (!irq_stat) + return IRQ_NONE; + + if (irq_stat & CLCD_IRQ_NEXTBASE_UPDATE) { + drm_crtc_handle_vblank(&priv->pipe.crtc); + + status = IRQ_HANDLED; + } + + /* Clear the interrupt once done */ + writel(irq_stat, priv->regs + CLCD_PL111_ICR); + + return status; +} + +static u32 pl111_get_fb_offset(struct drm_plane_state *pstate) +{ + struct drm_framebuffer *fb = pstate->fb; + struct drm_gem_cma_object *obj = drm_fb_cma_get_gem_obj(fb, 0); + + return (obj->paddr + + fb->offsets[0] + + fb->format->cpp[0] * pstate->src_x + + fb->pitches[0] * pstate->src_y); +} + +static int pl111_display_check(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *pstate, + struct drm_crtc_state *cstate) +{ + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *old_fb = pipe->plane.state->fb; + struct drm_framebuffer *fb = pstate->fb; + + if (mode->hdisplay % 16) + return -EINVAL; + + if (fb) { + u32 offset = pl111_get_fb_offset(pstate); + + /* FB base address must be dword aligned. */ + if (offset & 3) + return -EINVAL; + + /* There's no pitch register -- the mode's hdisplay + * controls it. + */ + if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) + return -EINVAL; + + /* We can't change the FB format in a flicker-free + * manner (and only update it during CRTC enable). + */ + if (old_fb && old_fb->format != fb->format) + cstate->mode_changed = true; + } + + return 0; +} + +static void pl111_display_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *cstate) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_plane *plane = &pipe->plane; + struct drm_device *drm = crtc->dev; + struct pl111_drm_dev_private *priv = drm->dev_private; + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *fb = plane->state->fb; + struct drm_connector *connector = &priv->connector.connector; + u32 cntl; + u32 ppl, hsw, hfp, hbp; + u32 lpp, vsw, vfp, vbp; + u32 cpl; + int ret; + + ret = clk_set_rate(priv->clk, mode->clock * 1000); + if (ret) { + dev_err(drm->dev, + "Failed to set pixel clock rate to %d: %d\n", + mode->clock * 1000, ret); + } + + clk_prepare_enable(priv->clk); + + ppl = (mode->hdisplay / 16) - 1; + hsw = mode->hsync_end - mode->hsync_start - 1; + hfp = mode->hsync_start - mode->hdisplay - 1; + hbp = mode->htotal - mode->hsync_end - 1; + + lpp = mode->vdisplay - 1; + vsw = mode->vsync_end - mode->vsync_start - 1; + vfp = mode->vsync_start - mode->vdisplay; + vbp = mode->vtotal - mode->vsync_end; + + cpl = mode->hdisplay - 1; + + writel((ppl << 2) | + (hsw << 8) | + (hfp << 16) | + (hbp << 24), + priv->regs + CLCD_TIM0); + writel(lpp | + (vsw << 10) | + (vfp << 16) | + (vbp << 24), + priv->regs + CLCD_TIM1); + /* XXX: We currently always use CLCDCLK with no divisor. We + * could probably reduce power consumption by using HCLK + * (apb_pclk) with a divisor when it gets us near our target + * pixel clock. + */ + writel(((mode->flags & DRM_MODE_FLAG_NHSYNC) ? TIM2_IHS : 0) | + ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? TIM2_IVS : 0) | + ((connector->display_info.bus_flags & + DRM_BUS_FLAG_DE_LOW) ? TIM2_IOE : 0) | + ((connector->display_info.bus_flags & + DRM_BUS_FLAG_PIXDATA_NEGEDGE) ? TIM2_IPC : 0) | + TIM2_BCD | + (cpl << 16), + priv->regs + CLCD_TIM2); + writel(0, priv->regs + CLCD_TIM3); + + drm_panel_prepare(priv->connector.panel); + + /* Enable and Power Up */ + cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1); + + /* Note that the the hardware's format reader takes 'r' from + * the low bit, while DRM formats list channels from high bit + * to low bit as you read left to right. + */ + switch (fb->format->format) { + case DRM_FORMAT_ABGR8888: + case DRM_FORMAT_XBGR8888: + cntl |= CNTL_LCDBPP24; + break; + case DRM_FORMAT_ARGB8888: + case DRM_FORMAT_XRGB8888: + cntl |= CNTL_LCDBPP24 | CNTL_BGR; + break; + case DRM_FORMAT_BGR565: + cntl |= CNTL_LCDBPP16_565; + break; + case DRM_FORMAT_RGB565: + cntl |= CNTL_LCDBPP16_565 | CNTL_BGR; + break; + case DRM_FORMAT_ABGR1555: + case DRM_FORMAT_XBGR1555: + cntl |= CNTL_LCDBPP16; + break; + case DRM_FORMAT_ARGB1555: + case DRM_FORMAT_XRGB1555: + cntl |= CNTL_LCDBPP16 | CNTL_BGR; + break; + case DRM_FORMAT_ABGR4444: + case DRM_FORMAT_XBGR4444: + cntl |= CNTL_LCDBPP16_444; + break; + case DRM_FORMAT_ARGB4444: + case DRM_FORMAT_XRGB4444: + cntl |= CNTL_LCDBPP16_444 | CNTL_BGR; + break; + default: + WARN_ONCE(true, "Unknown FB format 0x%08x\n", + fb->format->format); + break; + } + + writel(cntl, priv->regs + CLCD_PL111_CNTL); + + drm_panel_enable(priv->connector.panel); + + drm_crtc_vblank_on(crtc); +} + +void pl111_display_disable(struct drm_simple_display_pipe *pipe) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct pl111_drm_dev_private *priv = drm->dev_private; + + drm_crtc_vblank_off(crtc); + + drm_panel_disable(priv->connector.panel); + + /* Disable and Power Down */ + writel(0, priv->regs + CLCD_PL111_CNTL); + + drm_panel_unprepare(priv->connector.panel); + + clk_disable_unprepare(priv->clk); +} + +static void pl111_display_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_pstate) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct pl111_drm_dev_private *priv = drm->dev_private; + struct drm_pending_vblank_event *event = crtc->state->event; + struct drm_plane *plane = &pipe->plane; + struct drm_plane_state *pstate = plane->state; + struct drm_framebuffer *fb = pstate->fb; + + if (fb) { + u32 addr = pl111_get_fb_offset(pstate); + + writel(addr, priv->regs + CLCD_UBAS); + } + + if (event) { + crtc->state->event = NULL; + + spin_lock_irq(&crtc->dev->event_lock); + if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0) + drm_crtc_arm_vblank_event(crtc, event); + else + drm_crtc_send_vblank_event(crtc, event); + spin_unlock_irq(&crtc->dev->event_lock); + } +} + +int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) +{ + struct pl111_drm_dev_private *priv = drm->dev_private; + + writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB); + + return 0; +} + +void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) +{ + struct pl111_drm_dev_private *priv = drm->dev_private; + + writel(0, priv->regs + CLCD_PL111_IENB); +} + +static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state) +{ + return drm_fb_cma_prepare_fb(&pipe->plane, plane_state); +} + +const struct drm_simple_display_pipe_funcs pl111_display_funcs = { + .check = pl111_display_check, + .enable = pl111_display_enable, + .disable = pl111_display_disable, + .update = pl111_display_update, + .prepare_fb = pl111_display_prepare_fb, +}; + +int pl111_display_init(struct drm_device *drm) +{ + struct pl111_drm_dev_private *priv = drm->dev_private; + struct device *dev = drm->dev; + struct device_node *endpoint; + u32 tft_r0b0g0[3]; + int ret; + static const u32 formats[] = { + DRM_FORMAT_ABGR8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_BGR565, + DRM_FORMAT_RGB565, + DRM_FORMAT_ABGR1555, + DRM_FORMAT_XBGR1555, + DRM_FORMAT_ARGB1555, + DRM_FORMAT_XRGB1555, + DRM_FORMAT_ABGR4444, + DRM_FORMAT_XBGR4444, + DRM_FORMAT_ARGB4444, + DRM_FORMAT_XRGB4444, + }; + + endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); + if (!endpoint) + return -ENODEV; + + if (of_property_read_u32_array(endpoint, + "arm,pl11x,tft-r0g0b0-pads", + tft_r0b0g0, + ARRAY_SIZE(tft_r0b0g0)) != 0) { + dev_err(dev, "arm,pl11x,tft-r0g0b0-pads should be 3 ints\n"); + of_node_put(endpoint); + return -ENOENT; + } + of_node_put(endpoint); + + if (tft_r0b0g0[0] != 0 || + tft_r0b0g0[1] != 8 || + tft_r0b0g0[2] != 16) { + dev_err(dev, "arm,pl11x,tft-r0g0b0-pads != [0,8,16] not yet supported\n"); + return -EINVAL; + } + + ret = drm_simple_display_pipe_init(drm, &priv->pipe, + &pl111_display_funcs, + formats, ARRAY_SIZE(formats), + &priv->connector.connector); + if (ret) + return ret; + + return 0; +} diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h new file mode 100644 index 000000000000..f381593921b7 --- /dev/null +++ b/drivers/gpu/drm/pl111/pl111_drm.h @@ -0,0 +1,56 @@ +/* + * + * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. + * + * + * Parts of this file were based on sources as follows: + * + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + * + */ + +#ifndef _PL111_DRM_H_ +#define _PL111_DRM_H_ + +#include <drm/drm_gem.h> +#include <drm/drm_simple_kms_helper.h> + +#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2) + +struct pl111_drm_connector { + struct drm_connector connector; + struct drm_panel *panel; +}; + +struct pl111_drm_dev_private { + struct drm_device *drm; + + struct pl111_drm_connector connector; + struct drm_simple_display_pipe pipe; + struct drm_fbdev_cma *fbdev; + + void *regs; + struct clk *clk; +}; + +#define to_pl111_connector(x) \ + container_of(x, struct pl111_drm_connector, connector) + +int pl111_display_init(struct drm_device *dev); +int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc); +void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc); +irqreturn_t pl111_irq(int irq, void *data); +int pl111_connector_init(struct drm_device *dev); +int pl111_encoder_init(struct drm_device *dev); +int pl111_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args); + +#endif /* _PL111_DRM_H_ */ diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c new file mode 100644 index 000000000000..936403f65508 --- /dev/null +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -0,0 +1,272 @@ +/* + * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. + * + * Parts of this file were based on sources as follows: + * + * Copyright (c) 2006-2008 Intel Corporation + * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> + * Copyright (C) 2011 Texas Instruments + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms of + * such GNU licence. + * + */ + +/** + * DOC: ARM PrimeCell PL111 CLCD Driver + * + * The PL111 is a simple LCD controller that can support TFT and STN + * displays. This driver exposes a standard KMS interface for them. + * + * This driver uses the same Device Tree binding as the fbdev CLCD + * driver. While the fbdev driver supports panels that may be + * connected to the CLCD internally to the CLCD driver, in DRM the + * panels get split out to drivers/gpu/drm/panels/. This means that, + * in converting from using fbdev to using DRM, you also need to write + * a panel driver (which may be as simple as an entry in + * panel-simple.c). + * + * The driver currently doesn't expose the cursor. The DRM API for + * cursors requires support for 64x64 ARGB8888 cursor images, while + * the hardware can only support 64x64 monochrome with masking + * cursors. While one could imagine trying to hack something together + * to look at the ARGB8888 and program reasonable in monochrome, we + * just don't expose the cursor at all instead, and leave cursor + * support to the X11 software cursor layer. + * + * TODO: + * + * - Fix race between setting plane base address and getting IRQ for + * vsync firing the pageflip completion. + * + * - Expose the correct set of formats we can support based on the + * "arm,pl11x,tft-r0g0b0-pads" DT property. + * + * - Use the "max-memory-bandwidth" DT property to filter the + * supported formats. + * + * - Read back hardware state at boot to skip reprogramming the + * hardware when doing a no-op modeset. + * + * - Use the internal clock divisor to reduce power consumption by + * using HCLK (apb_pclk) when appropriate. + */ + +#include <linux/amba/bus.h> +#include <linux/amba/clcd-regs.h> +#include <linux/version.h> +#include <linux/shmem_fs.h> +#include <linux/dma-buf.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_fb_cma_helper.h> + +#include "pl111_drm.h" + +#define DRIVER_DESC "DRM module for PL111" + +struct drm_mode_config_funcs mode_config_funcs = { + .fb_create = drm_fb_cma_create, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +static int pl111_modeset_init(struct drm_device *dev) +{ + struct drm_mode_config *mode_config; + struct pl111_drm_dev_private *priv = dev->dev_private; + int ret = 0; + + drm_mode_config_init(dev); + mode_config = &dev->mode_config; + mode_config->funcs = &mode_config_funcs; + mode_config->min_width = 1; + mode_config->max_width = 1024; + mode_config->min_height = 1; + mode_config->max_height = 768; + + ret = pl111_connector_init(dev); + if (ret) { + dev_err(dev->dev, "Failed to create pl111_drm_connector\n"); + goto out_config; + } + + /* Don't actually attach if we didn't find a drm_panel + * attached to us. This will allow a kernel to include both + * the fbdev pl111 driver and this one, and choose between + * them based on which subsystem has support for the panel. + */ + if (!priv->connector.panel) { + dev_info(dev->dev, + "Disabling due to lack of DRM panel device.\n"); + ret = -ENODEV; + goto out_config; + } + + ret = pl111_display_init(dev); + if (ret != 0) { + dev_err(dev->dev, "Failed to init display\n"); + goto out_config; + } + + ret = drm_vblank_init(dev, 1); + if (ret != 0) { + dev_err(dev->dev, "Failed to init vblank\n"); + goto out_config; + } + + drm_mode_config_reset(dev); + + priv->fbdev = drm_fbdev_cma_init(dev, 32, + dev->mode_config.num_connector); + + drm_kms_helper_poll_init(dev); + + goto finish; + +out_config: + drm_mode_config_cleanup(dev); +finish: + return ret; +} + +DEFINE_DRM_GEM_CMA_FOPS(drm_fops); + +static void pl111_lastclose(struct drm_device *dev) +{ + struct pl111_drm_dev_private *priv = dev->dev_private; + + drm_fbdev_cma_restore_mode(priv->fbdev); +} + +static struct drm_driver pl111_drm_driver = { + .driver_features = + DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | DRIVER_ATOMIC, + .lastclose = pl111_lastclose, + .ioctls = NULL, + .fops = &drm_fops, + .name = "pl111", + .desc = DRIVER_DESC, + .date = "20170317", + .major = 1, + .minor = 0, + .patchlevel = 0, + .dumb_create = drm_gem_cma_dumb_create, + .dumb_destroy = drm_gem_dumb_destroy, + .dumb_map_offset = drm_gem_cma_dumb_map_offset, + .gem_free_object = drm_gem_cma_free_object, + .gem_vm_ops = &drm_gem_cma_vm_ops, + + .enable_vblank = pl111_enable_vblank, + .disable_vblank = pl111_disable_vblank, + + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_import = drm_gem_prime_import, + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, + .gem_prime_export = drm_gem_prime_export, + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, +}; + +#ifdef CONFIG_ARM_AMBA +static int pl111_amba_probe(struct amba_device *amba_dev, + const struct amba_id *id) +{ + struct device *dev = &amba_dev->dev; + struct pl111_drm_dev_private *priv; + struct drm_device *drm; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + drm = drm_dev_alloc(&pl111_drm_driver, dev); + if (IS_ERR(drm)) + return PTR_ERR(drm); + amba_set_drvdata(amba_dev, drm); + priv->drm = drm; + drm->dev_private = priv; + + priv->clk = devm_clk_get(dev, "clcdclk"); + if (IS_ERR(priv->clk)) { + dev_err(dev, "CLCD: unable to get clk.\n"); + ret = PTR_ERR(priv->clk); + goto dev_unref; + } + + priv->regs = devm_ioremap_resource(dev, &amba_dev->res); + if (!priv->regs) { + dev_err(dev, "%s failed mmio\n", __func__); + return -EINVAL; + } + + /* turn off interrupts before requesting the irq */ + writel(0, priv->regs + CLCD_PL111_IENB); + + ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0, + "pl111", priv); + if (ret != 0) { + dev_err(dev, "%s failed irq %d\n", __func__, ret); + return ret; + } + + ret = pl111_modeset_init(drm); + if (ret != 0) + goto dev_unref; + + ret = drm_dev_register(drm, 0); + if (ret < 0) + goto dev_unref; + + return 0; + +dev_unref: + drm_dev_unref(drm); + return ret; +} + +static int pl111_amba_remove(struct amba_device *amba_dev) +{ + struct drm_device *drm = amba_get_drvdata(amba_dev); + struct pl111_drm_dev_private *priv = drm->dev_private; + + drm_dev_unregister(drm); + if (priv->fbdev) + drm_fbdev_cma_fini(priv->fbdev); + drm_mode_config_cleanup(drm); + drm_dev_unref(drm); + + return 0; +} + +static struct amba_id pl111_id_table[] = { + { + .id = 0x00041111, + .mask = 0x000fffff, + }, + {0, 0}, +}; + +static struct amba_driver pl111_amba_driver = { + .drv = { + .name = "drm-clcd-pl111", + }, + .probe = pl111_amba_probe, + .remove = pl111_amba_remove, + .id_table = pl111_id_table, +}; + +module_amba_driver(pl111_amba_driver); +#endif /* CONFIG_ARM_AMBA */ + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("ARM Ltd."); +MODULE_LICENSE("GPL"); |