diff options
| -rw-r--r-- | Documentation/hwmon/lm85 | 10 | ||||
| -rw-r--r-- | drivers/hwmon/lm85.c | 77 |
2 files changed, 38 insertions, 49 deletions
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 6d41db7f17f8..400620741290 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -163,16 +163,6 @@ configured individually according to the following options. * pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off temperature. (PWM value from 0 to 255) -* pwm#_auto_pwm_freq - select base frequency of PWM output. You can select - in range of 10.0 to 94.0 Hz in .1 Hz units. - (Values 100 to 940). - -The pwm#_auto_pwm_freq can be set to one of the following 8 values. Setting the -frequency to a value not on this list, will result in the next higher frequency -being selected. The actual device frequency may vary slightly from this -specification as designed by the manufacturer. Consult the datasheet for more -details. (PWM Frequency values: 100, 150, 230, 300, 380, 470, 620, 940) - * pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature the bahaviour of fans. Write 1 to let fans spinning at pwm#_auto_pwm_min or write 0 to let them off. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 3594a02f281b..6b676df3547b 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -191,8 +191,8 @@ static int RANGE_TO_REG(int range) #define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] /* These are the PWM frequency encodings */ -static const int lm85_freq_map[] = { /* .1 Hz */ - 100, 150, 230, 300, 380, 470, 620, 940 +static const int lm85_freq_map[8] = { /* 1 Hz */ + 10, 15, 23, 30, 38, 47, 62, 94 }; static int FREQ_TO_REG(int freq) @@ -275,7 +275,6 @@ struct lm85_zone { struct lm85_autofan { u8 config; /* Register value */ - u8 freq; /* PWM frequency, encoded */ u8 min_pwm; /* Minimum PWM value, encoded */ u8 min_off; /* Min PWM or OFF below "limit", flag */ }; @@ -301,6 +300,7 @@ struct lm85_data { u16 fan[4]; /* Register value */ u16 fan_min[4]; /* Register value */ u8 pwm[3]; /* Register value */ + u8 pwm_freq[3]; /* Register encoding */ u8 temp_ext[3]; /* Decoded values */ u8 in_ext[8]; /* Decoded values */ u8 vid; /* Register value */ @@ -528,11 +528,38 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute return count; } +static ssize_t show_pwm_freq(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct lm85_data *data = lm85_update_device(dev); + return sprintf(buf, "%d\n", FREQ_FROM_REG(data->pwm_freq[nr])); +} + +static ssize_t set_pwm_freq(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct i2c_client *client = to_i2c_client(dev); + struct lm85_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->pwm_freq[nr] = FREQ_TO_REG(val); + lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), + (data->zone[nr].range << 4) + | data->pwm_freq[nr]); + mutex_unlock(&data->update_lock); + return count; +} + #define show_pwm_reg(offset) \ static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ show_pwm, set_pwm, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwm_enable, set_pwm_enable, offset - 1) + show_pwm_enable, set_pwm_enable, offset - 1); \ +static SENSOR_DEVICE_ATTR(pwm##offset##_freq, S_IRUGO | S_IWUSR, \ + show_pwm_freq, set_pwm_freq, offset - 1) show_pwm_reg(1); show_pwm_reg(2); @@ -761,31 +788,6 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, return count; } -static ssize_t show_pwm_auto_pwm_freq(struct device *dev, - struct device_attribute *attr, char *buf) -{ - int nr = to_sensor_dev_attr(attr)->index; - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); -} - -static ssize_t set_pwm_auto_pwm_freq(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int nr = to_sensor_dev_attr(attr)->index; - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - mutex_lock(&data->update_lock); - data->autofan[nr].freq = FREQ_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - (data->zone[nr].range << 4) - | data->autofan[nr].freq); - mutex_unlock(&data->update_lock); - return count; -} - #define pwm_auto(offset) \ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels, \ S_IRUGO | S_IWUSR, show_pwm_auto_channels, \ @@ -795,10 +797,7 @@ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_min, \ set_pwm_auto_pwm_min, offset - 1); \ static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, \ S_IRUGO | S_IWUSR, show_pwm_auto_pwm_minctl, \ - set_pwm_auto_pwm_minctl, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_auto_pwm_freq, \ - S_IRUGO | S_IWUSR, show_pwm_auto_pwm_freq, \ - set_pwm_auto_pwm_freq, offset - 1); + set_pwm_auto_pwm_minctl, offset - 1) pwm_auto(1); pwm_auto(2); @@ -867,7 +866,7 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, TEMP_FROM_REG(data->zone[nr].limit)); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); + | (data->pwm_freq[nr] & 0x07)); /* Update temp_auto_hyst and temp_auto_off */ data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( @@ -910,7 +909,7 @@ static ssize_t set_temp_auto_temp_max(struct device *dev, val - min); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); + | (data->pwm_freq[nr] & 0x07)); mutex_unlock(&data->update_lock); return count; } @@ -984,6 +983,9 @@ static struct attribute *lm85_attributes[] = { &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -1026,9 +1028,6 @@ static struct attribute *lm85_attributes[] = { &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_freq.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_freq.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_freq.dev_attr.attr, &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr, @@ -1458,7 +1457,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->autofan[i].freq = val & 0x07; + data->pwm_freq[i] = val & 0x07; data->zone[i].range = val >> 4; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); |