diff options
-rw-r--r-- | MAINTAINERS | 7 | ||||
-rw-r--r-- | drivers/crypto/Kconfig | 1 | ||||
-rw-r--r-- | drivers/crypto/Makefile | 1 | ||||
-rw-r--r-- | drivers/crypto/starfive/Kconfig | 17 | ||||
-rw-r--r-- | drivers/crypto/starfive/Makefile | 4 | ||||
-rw-r--r-- | drivers/crypto/starfive/jh7110-cryp.c | 201 | ||||
-rw-r--r-- | drivers/crypto/starfive/jh7110-cryp.h | 63 |
7 files changed, 294 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 7e0b87d5aa2e..f2e19f576fec 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20095,6 +20095,13 @@ F: Documentation/devicetree/bindings/clock/starfive,jh71*.yaml F: drivers/clk/starfive/clk-starfive-jh71* F: include/dt-bindings/clock/starfive?jh71*.h +STARFIVE CRYPTO DRIVER +M: Jia Jie Ho <jiajie.ho@starfivetech.com> +M: William Qiu <william.qiu@starfivetech.com> +S: Supported +F: Documentation/devicetree/bindings/crypto/starfive* +F: drivers/crypto/starfive/ + STARFIVE JH71X0 PINCTRL DRIVERS M: Emil Renner Berthing <kernel@esmil.dk> M: Jianlong Huang <jianlong.huang@starfivetech.com> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 9c440cd0fed0..9f5b2d28bff5 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -807,5 +807,6 @@ config CRYPTO_DEV_SA2UL acceleration for cryptographic algorithms on these devices. source "drivers/crypto/aspeed/Kconfig" +source "drivers/crypto/starfive/Kconfig" endif # CRYPTO_HW diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index 51d36701e785..d859d6a5f3a4 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -50,3 +50,4 @@ obj-y += xilinx/ obj-y += hisilicon/ obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/ obj-y += intel/ +obj-y += starfive/ diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig new file mode 100644 index 000000000000..7a5a5d9f90ed --- /dev/null +++ b/drivers/crypto/starfive/Kconfig @@ -0,0 +1,17 @@ +# +# StarFive crypto drivers configuration +# + +config CRYPTO_DEV_JH7110 + tristate "StarFive JH7110 cryptographic engine driver" + depends on SOC_STARFIVE || COMPILE_TEST + select CRYPTO_ENGINE + select ARM_AMBA + select DMADEVICES + select AMBA_PL08X + help + Support for StarFive JH7110 crypto hardware acceleration engine. + This module provides acceleration for public key algo, + skciphers, AEAD and hash functions. + + If you choose 'M' here, this module will be called jh7110-crypto. diff --git a/drivers/crypto/starfive/Makefile b/drivers/crypto/starfive/Makefile new file mode 100644 index 000000000000..41221acaee39 --- /dev/null +++ b/drivers/crypto/starfive/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_CRYPTO_DEV_JH7110) += jh7110-crypto.o +jh7110-crypto-objs := jh7110-cryp.o diff --git a/drivers/crypto/starfive/jh7110-cryp.c b/drivers/crypto/starfive/jh7110-cryp.c new file mode 100644 index 000000000000..4b2505c23168 --- /dev/null +++ b/drivers/crypto/starfive/jh7110-cryp.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cryptographic API. + * + * Support for StarFive hardware cryptographic engine. + * Copyright (c) 2022 StarFive Technology + * + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#include "jh7110-cryp.h" + +#define DRIVER_NAME "jh7110-crypto" + +struct starfive_dev_list { + struct list_head dev_list; + spinlock_t lock; /* protect dev_list */ +}; + +static struct starfive_dev_list dev_list = { + .dev_list = LIST_HEAD_INIT(dev_list.dev_list), + .lock = __SPIN_LOCK_UNLOCKED(dev_list.lock), +}; + +struct starfive_cryp_dev *starfive_cryp_find_dev(struct starfive_cryp_ctx *ctx) +{ + struct starfive_cryp_dev *cryp = NULL, *tmp; + + spin_lock_bh(&dev_list.lock); + if (!ctx->cryp) { + list_for_each_entry(tmp, &dev_list.dev_list, list) { + cryp = tmp; + break; + } + ctx->cryp = cryp; + } else { + cryp = ctx->cryp; + } + + spin_unlock_bh(&dev_list.lock); + + return cryp; +} + +static int starfive_dma_init(struct starfive_cryp_dev *cryp) +{ + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + cryp->tx = dma_request_chan(cryp->dev, "tx"); + if (IS_ERR(cryp->tx)) + return dev_err_probe(cryp->dev, PTR_ERR(cryp->tx), + "Error requesting tx dma channel.\n"); + + cryp->rx = dma_request_chan(cryp->dev, "rx"); + if (IS_ERR(cryp->rx)) { + dma_release_channel(cryp->tx); + return dev_err_probe(cryp->dev, PTR_ERR(cryp->rx), + "Error requesting rx dma channel.\n"); + } + + return 0; +} + +static void starfive_dma_cleanup(struct starfive_cryp_dev *cryp) +{ + dma_release_channel(cryp->tx); + dma_release_channel(cryp->rx); +} + +static int starfive_cryp_probe(struct platform_device *pdev) +{ + struct starfive_cryp_dev *cryp; + struct resource *res; + int ret; + + cryp = devm_kzalloc(&pdev->dev, sizeof(*cryp), GFP_KERNEL); + if (!cryp) + return -ENOMEM; + + platform_set_drvdata(pdev, cryp); + cryp->dev = &pdev->dev; + + cryp->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(cryp->base)) + return dev_err_probe(&pdev->dev, PTR_ERR(cryp->base), + "Error remapping memory for platform device\n"); + + cryp->phys_base = res->start; + cryp->dma_maxburst = 32; + + cryp->hclk = devm_clk_get(&pdev->dev, "hclk"); + if (IS_ERR(cryp->hclk)) + return dev_err_probe(&pdev->dev, PTR_ERR(cryp->hclk), + "Error getting hardware reference clock\n"); + + cryp->ahb = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(cryp->ahb)) + return dev_err_probe(&pdev->dev, PTR_ERR(cryp->ahb), + "Error getting ahb reference clock\n"); + + cryp->rst = devm_reset_control_get_shared(cryp->dev, NULL); + if (IS_ERR(cryp->rst)) + return dev_err_probe(&pdev->dev, PTR_ERR(cryp->rst), + "Error getting hardware reset line\n"); + + clk_prepare_enable(cryp->hclk); + clk_prepare_enable(cryp->ahb); + reset_control_deassert(cryp->rst); + + spin_lock(&dev_list.lock); + list_add(&cryp->list, &dev_list.dev_list); + spin_unlock(&dev_list.lock); + + ret = starfive_dma_init(cryp); + if (ret) { + if (ret == -EPROBE_DEFER) + goto err_probe_defer; + else + goto err_dma_init; + } + + /* Initialize crypto engine */ + cryp->engine = crypto_engine_alloc_init(&pdev->dev, 1); + if (!cryp->engine) { + ret = -ENOMEM; + goto err_engine; + } + + ret = crypto_engine_start(cryp->engine); + if (ret) + goto err_engine_start; + + return 0; + +err_engine_start: + crypto_engine_exit(cryp->engine); +err_engine: + starfive_dma_cleanup(cryp); +err_dma_init: + spin_lock(&dev_list.lock); + list_del(&cryp->list); + spin_unlock(&dev_list.lock); + + clk_disable_unprepare(cryp->hclk); + clk_disable_unprepare(cryp->ahb); + reset_control_assert(cryp->rst); +err_probe_defer: + return ret; +} + +static int starfive_cryp_remove(struct platform_device *pdev) +{ + struct starfive_cryp_dev *cryp = platform_get_drvdata(pdev); + + crypto_engine_stop(cryp->engine); + crypto_engine_exit(cryp->engine); + + starfive_dma_cleanup(cryp); + + spin_lock(&dev_list.lock); + list_del(&cryp->list); + spin_unlock(&dev_list.lock); + + clk_disable_unprepare(cryp->hclk); + clk_disable_unprepare(cryp->ahb); + reset_control_assert(cryp->rst); + + return 0; +} + +static const struct of_device_id starfive_dt_ids[] __maybe_unused = { + { .compatible = "starfive,jh7110-crypto", .data = NULL}, + {}, +}; +MODULE_DEVICE_TABLE(of, starfive_dt_ids); + +static struct platform_driver starfive_cryp_driver = { + .probe = starfive_cryp_probe, + .remove = starfive_cryp_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = starfive_dt_ids, + }, +}; + +module_platform_driver(starfive_cryp_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("StarFive JH7110 Cryptographic Module"); diff --git a/drivers/crypto/starfive/jh7110-cryp.h b/drivers/crypto/starfive/jh7110-cryp.h new file mode 100644 index 000000000000..393efd38b098 --- /dev/null +++ b/drivers/crypto/starfive/jh7110-cryp.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __STARFIVE_STR_H__ +#define __STARFIVE_STR_H__ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> + +#include <crypto/engine.h> + +#define STARFIVE_ALG_CR_OFFSET 0x0 +#define STARFIVE_ALG_FIFO_OFFSET 0x4 +#define STARFIVE_IE_MASK_OFFSET 0x8 +#define STARFIVE_IE_FLAG_OFFSET 0xc +#define STARFIVE_DMA_IN_LEN_OFFSET 0x10 +#define STARFIVE_DMA_OUT_LEN_OFFSET 0x14 + +#define STARFIVE_MSG_BUFFER_SIZE SZ_16K + +union starfive_alg_cr { + u32 v; + struct { + u32 start :1; + u32 aes_dma_en :1; + u32 rsvd_0 :1; + u32 hash_dma_en :1; + u32 alg_done :1; + u32 rsvd_1 :3; + u32 clear :1; + u32 rsvd_2 :23; + }; +}; + +struct starfive_cryp_ctx { + struct crypto_engine_ctx enginectx; + struct starfive_cryp_dev *cryp; +}; + +struct starfive_cryp_dev { + struct list_head list; + struct device *dev; + + struct clk *hclk; + struct clk *ahb; + struct reset_control *rst; + + void __iomem *base; + phys_addr_t phys_base; + + u32 dma_maxburst; + struct dma_chan *tx; + struct dma_chan *rx; + struct dma_slave_config cfg_in; + struct dma_slave_config cfg_out; + + struct crypto_engine *engine; + + union starfive_alg_cr alg_cr; +}; + +struct starfive_cryp_dev *starfive_cryp_find_dev(struct starfive_cryp_ctx *ctx); + +#endif |